From 15988280f7699e504e6154d5b44b2484dde9b676 Mon Sep 17 00:00:00 2001
From: testscript <testscript@example.com>
Date: Sun, 21 Nov 2021 09:20:34 +0000
Subject: [PATCH] update readmes

---
 README.md                            | 3 ++-
 README_zh.md                         | 3 ++-
 example_config/p2p_mode/README_zh.md | 1 -
 example_config/super_mode/n1.yaml    | 4 ++--
 example_config/super_mode/n2.yaml    | 2 +-
 5 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/README.md b/README.md
index a9c3ca7..418c816 100644
--- a/README.md
+++ b/README.md
@@ -99,7 +99,8 @@ Usage of ./etherguard-go:
 7. `dynamicroute`: Log for dynamic route.
     1. `sendpinginterval`: Send `Ping` interval
     2. `dupchecktimeout`: Duplication chack timeout.
-    3. `conntimeout`: Connection timeout.
+    1. `peeralivetimeout`: Reset the timer while received a packet. Mark the peer offlline while exceed this time.
+    3. `conntimeout`: The interval that check peer offline or not. If peer was marked offine, it will switch to next endpoint.
     4. `savenewpeers`: Save peer info to local file.
     5. `supernode`: See [Super Mode](example_config/super_mode/README.md)
     6. `p2p` See [P2P Mode](example_config/p2p_mode/README.md)
diff --git a/README_zh.md b/README_zh.md
index 01269cb..da46364 100644
--- a/README_zh.md
+++ b/README_zh.md
@@ -107,7 +107,8 @@ Usage of ./etherguard-go-vpp:
 7. `dynamicroute`: 動態路由相關的設定。時間類設定單位都是秒
     1. `sendpinginterval`: 發送Ping訊息的間隔
     2. `dupchecktimeout`: 重複封包檢查的timeout。完全相同的封包收第二次會被丟棄
-    3. `conntimeout`: 鄰居應該要發Ping過來，超過就視為鄰居掛了
+    1. `peeralivetimeout`: 每次收到封包就重置，超過時間沒收到就標記該peer離線
+    3. `conntimeout`: 檢查peer離線的間格，如果標記離線，就切換下一個endpoint(supernode可能傳了多個endpoint過來)
     4. `savenewpeers`: 是否把下載來的鄰居資訊存到本地設定檔裡面
     5. `supernode`: 參見[Super模式](example_config/super_mode/README_zh.md)
     6. `p2p` 參見 [P2P模式](example_config/p2p_mode/README_zh.md)
diff --git a/example_config/p2p_mode/README_zh.md b/example_config/p2p_mode/README_zh.md
index 239ccf2..590234b 100644
--- a/example_config/p2p_mode/README_zh.md
+++ b/example_config/p2p_mode/README_zh.md
@@ -60,7 +60,6 @@ Pong封包是一種`ControlMsg`，使用**flood廣播**盡量讓每個節點都
 P2P模式也有幾個參數
 1. usep2p: 是否啟用P2P模式
 1. sendpeerinterval: 廣播BoardcastPeer的間格
-1. peeralivetimeout: 每次收到封包就重置，超過時間沒收到就視為該peer離線
 1. graphrecalculatesetting: 一些和[Floyd-Warshall演算法](https://zh.wikipedia.org/zh-tw/Floyd-Warshall算法)相關的參數
     1. staticmode: 關閉Floyd-Warshall演算法，只使用一開始載入的nexthoptable。P2P單純用來打洞
     1. jittertolerance: 抖動容許誤差，收到Pong以後，一個37ms，一個39ms，不會觸發重新計算
diff --git a/example_config/super_mode/n1.yaml b/example_config/super_mode/n1.yaml
index 639dab9..4073104 100644
--- a/example_config/super_mode/n1.yaml
+++ b/example_config/super_mode/n1.yaml
@@ -9,8 +9,8 @@ interface:
   sendaddr: 127.0.0.1:5001
   l2headermode: kbdbg
 nodeid: 1
-postscript: example_config/echo.sh test
 nodename: Node01
+postscript: example_config/echo.sh test
 defaultttl: 200
 l2fibtimeout: 3600
 privkey: 6GyDagZKhbm5WNqMiRHhkf43RlbMJ34IieTlIuvfJ1M=
@@ -24,7 +24,7 @@ loglevel:
   logntp: true
 dynamicroute:
   sendpinginterval: 16
-  peeralivetimeout: 30
+  peeralivetimeout: 70
   dupchecktimeout: 40
   conntimeout: 30
   connnexttry: 5
diff --git a/example_config/super_mode/n2.yaml b/example_config/super_mode/n2.yaml
index f2f8542..ecdcd4b 100644
--- a/example_config/super_mode/n2.yaml
+++ b/example_config/super_mode/n2.yaml
@@ -24,7 +24,7 @@ loglevel:
   logntp: true
 dynamicroute:
   sendpinginterval: 16
-  peeralivetimeout: 30
+  peeralivetimeout: 70
   dupchecktimeout: 40
   conntimeout: 30
   connnexttry: 5