mirror of
https://github.com/KusakabeShi/EtherGuard-VPN.git
synced 2024-12-04 21:20:39 +01:00
.. | ||
EgNet_edge1.yaml | ||
EgNet_edge2.yaml | ||
EgNet_edge3.yaml | ||
EgNet_edge4.yaml | ||
EgNet_edge5.yaml | ||
EgNet_edge6.yaml | ||
genp2p_2.yaml | ||
genp2p.yaml | ||
README_zh.md | ||
README.md |
Etherguard
P2P Mode
P2P Mode is inspired by tinc, There are no SuperNode. All EdgeNode will exchange information each other.
EdgeNodes are keep trying to connect each other, and notify all other peers success or not.
All edges runs Floyd-Warshall Algorithm locally and find the best route by it self.
Not recommend to use this mode in production environment, not test yet.
Quick Start
First, edit the gensp2p.yaml
Config output dir: /tmp/eg_gen_static # Profile output location
ConfigTemplate for edge node: "" # Profile Template
Network name: "EgNet"
Edge Node:
MacAddress prefix: "" # Leave blank to generate randomly
IPv4 range: 192.168.76.0/24 # By the way, the IP part can be omitted.
IPv6 range: fd95:71cb:a3df:e586::/64 # The only purpose of this field is to call the ip command after startup to add an ip to the tap interface
IPv6 LL range: fe80::a3df:0/112 #
Edge Nodes: # Node related settings
1:
Endpoint(optional): 127.0.0.1:3001
2:
Endpoint(optional): 127.0.0.1:3002
3:
Endpoint(optional): 127.0.0.1:3003
4:
Endpoint(optional): 127.0.0.1:3004
5:
Endpoint(optional): 127.0.0.1:3005
6:
Endpoint(optional): 127.0.0.1:3006
Run this, it will generate the required configuration file
./etherguard-go -mode gencfg -cfgmode p2p -config example_config/p2p_mode/genp2p.yaml
Deploy these configuration files to the corresponding nodes, and then execute
./etherguard-go -config [config path] -mode edge
you can turn off unnecessary logs to increase performance after it works.
[WIP]