/* Copyright 2009-2018 Pierre Ossman for Cendio AB * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This software is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this software; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, * USA. */ /* * This code implements congestion control in the same way as TCP in * order to avoid excessive latency in the transport. This is needed * because "buffer bloat" is unfortunately still a very real problem. * * The basic principle is TCP Congestion Control (RFC 5618), with the * addition of using the TCP Vegas algorithm. The reason we use Vegas * is that we run on top of a reliable transport so we need a latency * based algorithm rather than a loss based one. There is also a lot of * interpolation of values. This is because we have rather horrible * granularity in our measurements. * * We use a simplistic form of slow start in order to ramp up quickly * from an idle state. We do not have any persistent threshold though * as we have too much noise for it to be reliable. */ #include #include #ifdef __linux__ #include #include #include #include #include #endif #include #include #include // Debug output on what the congestion control is up to #undef CONGESTION_DEBUG // Dump socket congestion window debug trace to disk #undef CONGESTION_TRACE using namespace rfb; // This window should get us going fairly fast on a decent bandwidth network. // If it's too high, it will rapidly be reduced and stay low. static const unsigned INITIAL_WINDOW = 16384; // TCP's minimal window is 3*MSS. But since we don't know the MSS, we // make a guess at 4 KiB (it's probably a bit higher). static const unsigned MINIMUM_WINDOW = 4096; // The current default maximum window for Linux (4 MiB). Should be a good // limit for now... static const unsigned MAXIMUM_WINDOW = 4194304; // Compare position even when wrapped around static inline bool isAfter(unsigned a, unsigned b) { return a != b && a - b <= UINT_MAX / 2; } static LogWriter vlog("Congestion"); Congestion::Congestion() : lastPosition(0), extraBuffer(0), baseRTT(-1), congWindow(INITIAL_WINDOW), inSlowStart(true), safeBaseRTT(-1), measurements(0), minRTT(-1), minCongestedRTT(-1) { gettimeofday(&lastUpdate, NULL); gettimeofday(&lastSent, NULL); memset(&lastPong, 0, sizeof(lastPong)); gettimeofday(&lastPongArrival, NULL); gettimeofday(&lastAdjustment, NULL); } Congestion::~Congestion() { } void Congestion::updatePosition(unsigned pos) { struct timeval now; unsigned delta, consumed; gettimeofday(&now, NULL); delta = pos - lastPosition; if ((delta > 0) || (extraBuffer > 0)) lastSent = now; // Idle for too long? // We use a very crude RTO calculation in order to keep things simple // FIXME: should implement RFC 2861 if (msBetween(&lastSent, &now) > __rfbmax(baseRTT*2, 100)) { #ifdef CONGESTION_DEBUG vlog.debug("Connection idle for %d ms, resetting congestion control", msBetween(&lastSent, &now)); #endif // Close congestion window and redo wire latency measurement congWindow = __rfbmin(INITIAL_WINDOW, congWindow); baseRTT = -1; measurements = 0; gettimeofday(&lastAdjustment, NULL); minRTT = minCongestedRTT = -1; inSlowStart = true; } // Commonly we will be in a state of overbuffering. We need to // estimate the extra delay that causes so we can separate it from // the delay caused by an incorrect congestion window. // (we cannot do this until we have a RTT measurement though) if (baseRTT != (unsigned)-1) { extraBuffer += delta; consumed = msBetween(&lastUpdate, &now) * congWindow / baseRTT; if (extraBuffer < consumed) extraBuffer = 0; else extraBuffer -= consumed; } lastPosition = pos; lastUpdate = now; } void Congestion::sentPing() { struct RTTInfo rttInfo; memset(&rttInfo, 0, sizeof(struct RTTInfo)); gettimeofday(&rttInfo.tv, NULL); rttInfo.pos = lastPosition; rttInfo.extra = getExtraBuffer(); rttInfo.congested = isCongested(); pings.push_back(rttInfo); } void Congestion::gotPong() { struct timeval now; struct RTTInfo rttInfo; unsigned rtt, delay; if (pings.empty()) return; gettimeofday(&now, NULL); rttInfo = pings.front(); pings.pop_front(); lastPong = rttInfo; lastPongArrival = now; rtt = msBetween(&rttInfo.tv, &now); if (rtt < 1) rtt = 1; // Try to estimate wire latency by tracking lowest seen latency if (rtt < baseRTT) safeBaseRTT = baseRTT = rtt; // Pings sent before the last adjustment aren't interesting as they // aren't a measurement of the current congestion window if (isBefore(&rttInfo.tv, &lastAdjustment)) return; // Estimate added delay because of overtaxed buffers (see above) delay = rttInfo.extra * baseRTT / congWindow; if (delay < rtt) rtt -= delay; else rtt = 1; // A latency less than the wire latency means that we've // understimated the congestion window. We can't really determine // how much, so pretend that we got no buffer latency at all. if (rtt < baseRTT) rtt = baseRTT; // Record the minimum seen delay (hopefully ignores jitter) and let // the congestion control do its thing. // // Note: We are delay based rather than loss based, which means we // need to look at pongs even if they weren't limited by the // current window ("congested"). Otherwise we will fail to // detect increasing congestion until the application exceeds // the congestion window. if (rtt < minRTT) minRTT = rtt; if (rttInfo.congested) { if (rtt < minCongestedRTT) minCongestedRTT = rtt; } measurements++; updateCongestion(); } bool Congestion::isCongested() { if (getInFlight() < congWindow) return false; return true; } int Congestion::getUncongestedETA() { unsigned targetAcked; const struct RTTInfo* prevPing; unsigned eta, elapsed; unsigned etaNext, delay; std::list::const_iterator iter; targetAcked = lastPosition - congWindow; // Simple case? if (isAfter(lastPong.pos, targetAcked)) return 0; // No measurements yet? if (baseRTT == (unsigned)-1) return -1; prevPing = &lastPong; eta = 0; elapsed = msSince(&lastPongArrival); // Walk the ping queue and figure out which one we are waiting for to // get to an uncongested state for (iter = pings.begin(); ;++iter) { struct RTTInfo curPing; // If we aren't waiting for a pong that will clear the congested // state then we have to estimate the final bit by pretending that // we had a ping just after the last position update. if (iter == pings.end()) { curPing.tv = lastUpdate; curPing.pos = lastPosition; curPing.extra = extraBuffer; } else { curPing = *iter; } etaNext = msBetween(&prevPing->tv, &curPing.tv); // Compensate for buffering delays delay = curPing.extra * baseRTT / congWindow; etaNext += delay; delay = prevPing->extra * baseRTT / congWindow; if (delay >= etaNext) etaNext = 0; else etaNext -= delay; // Found it? if (isAfter(curPing.pos, targetAcked)) { eta += etaNext * (curPing.pos - targetAcked) / (curPing.pos - prevPing->pos); if (elapsed > eta) return 0; else return eta - elapsed; } assert(iter != pings.end()); eta += etaNext; prevPing = &*iter; } } size_t Congestion::getBandwidth() { // No measurements yet? Guess RTT of 60 ms if (safeBaseRTT == (unsigned)-1) return congWindow * 1000 / 60; return congWindow * 1000 / safeBaseRTT; } unsigned Congestion::getPingTime() const { return safeBaseRTT; } void Congestion::debugTrace(const char* filename, int fd) { #ifdef CONGESTION_TRACE #ifdef __linux__ FILE *f; f = fopen(filename, "ab"); if (f != NULL) { struct tcp_info info; int buffered; socklen_t len; len = sizeof(info); if ((getsockopt(fd, IPPROTO_TCP, TCP_INFO, &info, &len) == 0) && (ioctl(fd, SIOCOUTQ, &buffered) == 0)) { struct timeval now; gettimeofday(&now, NULL); fprintf(f, "%u.%06u,%u,%u,%u,%u\n", (unsigned)now.tv_sec, (unsigned)now.tv_usec, congWindow, info.tcpi_snd_cwnd * info.tcpi_snd_mss, getInFlight(), buffered); } fclose(f); } #endif #endif } unsigned Congestion::getExtraBuffer() { unsigned elapsed; unsigned consumed; if (baseRTT == (unsigned)-1) return 0; elapsed = msSince(&lastUpdate); consumed = elapsed * congWindow / baseRTT; if (consumed >= extraBuffer) return 0; else return extraBuffer - consumed; } unsigned Congestion::getInFlight() { struct RTTInfo nextPong; unsigned etaNext, delay, elapsed, acked; // Simple case? if (lastPosition == lastPong.pos) return 0; // No measurements yet? if (baseRTT == (unsigned)-1) { if (!pings.empty()) return lastPosition - pings.front().pos; return 0; } // If we aren't waiting for any pong then we have to estimate things // by pretending that we had a ping just after the last position // update. if (pings.empty()) { nextPong.tv = lastUpdate; nextPong.pos = lastPosition; nextPong.extra = extraBuffer; } else { nextPong = pings.front(); } // First we need to estimate how many bytes have made it through // completely. Look at the next ping that should arrive and figure // out how far behind it should be and interpolate the positions. etaNext = msBetween(&lastPong.tv, &nextPong.tv); // Compensate for buffering delays delay = nextPong.extra * baseRTT / congWindow; etaNext += delay; delay = lastPong.extra * baseRTT / congWindow; if (delay >= etaNext) etaNext = 0; else etaNext -= delay; elapsed = msSince(&lastPongArrival); // The pong should be here any second. Be optimistic and assume // we can already use its value. if (etaNext <= elapsed) acked = nextPong.pos; else { acked = lastPong.pos; acked += (nextPong.pos - lastPong.pos) * elapsed / etaNext; } return lastPosition - acked; } void Congestion::updateCongestion() { unsigned diff; // We want at least three measurements to avoid noise if (measurements < 3) return; assert(minRTT >= baseRTT); assert(minCongestedRTT >= baseRTT); // The goal is to have a slightly too large congestion window since // a "perfect" one cannot be distinguished from a too small one. This // translates to a goal of a few extra milliseconds of delay. diff = minRTT - baseRTT; if (diff > __rfbmax(100, baseRTT/2)) { // We have no way of detecting loss, so assume massive latency // spike means packet loss. Adjust the window and go directly // to congestion avoidance. #ifdef CONGESTION_DEBUG vlog.debug("Latency spike! Backing off..."); #endif congWindow = congWindow * baseRTT / minRTT; inSlowStart = false; } if (inSlowStart) { // Slow start. Aggressive growth until we see congestion. if (diff > 25) { // If we see an increased latency then we assume we've hit the // limit and it's time to leave slow start and switch to // congestion avoidance congWindow = congWindow * baseRTT / minRTT; inSlowStart = false; } else { // It's not safe to increase unless we actually used the entire // congestion window, hence we look at minCongestedRTT and not // minRTT diff = minCongestedRTT - baseRTT; if (diff < 25) congWindow *= 2; } } else { // Congestion avoidance (VEGAS) if (diff > 50) { // Slightly too fast congWindow -= 4096; } else { // Only the "congested" pongs are checked to see if the // window is too small. diff = minCongestedRTT - baseRTT; if (diff < 5) { // Way too slow congWindow += 8192; } else if (diff < 25) { // Too slow congWindow += 4096; } } } if (congWindow < MINIMUM_WINDOW) congWindow = MINIMUM_WINDOW; if (congWindow > MAXIMUM_WINDOW) congWindow = MAXIMUM_WINDOW; #ifdef CONGESTION_DEBUG vlog.debug("RTT: %d/%d ms (%d ms), Window: %d KiB, Bandwidth: %g Mbps%s", minRTT, minCongestedRTT, baseRTT, congWindow / 1024, congWindow * 8.0 / baseRTT / 1000.0, inSlowStart ? " (slow start)" : ""); #endif measurements = 0; gettimeofday(&lastAdjustment, NULL); minRTT = minCongestedRTT = -1; }