Fix open-obs-studio.ps1

Data/Abbr/Aviation.csv

@@ -0,0 +1,140 @@
+Abbreviation,Definition
+AB,Air Base
+AC,Aircraft
+ACAS,Airborne Collision Avoidance System
+ACC,Area Control Centre
+ADAC,Abu Dhabi Airports
+ADP,Aeroportes de Paris
+AENA,Aeropuertos Españoles y Navegación Aérea
+AF,Air Field
+AFM,Aircraft Flight Manual
+AGL,Above Ground Level
+AIP,Aeronautical Information Publication
+AMAN,Arrival Manager
+AOA,Angle of Attack
+AOM,Airplane Operating Manual
+AOR,Area of Responsibility
+AFIS,Aerodrome Flight Information Service
+AFM,Airplane Flight Manual
+AGL,Above Ground Level
+AIP,Aeronautical Information Publication
+ANSP,Air Navigation Service Provider
+ARTCC,Air Route Traffic Control Centre
+ASB,Airspace Block
+ATA,Actual Time of Arrival
+ATC,Air Traffic Control
+ATIS,Automatic Terminal Information Service
+ATO,Air Traffic Organization
+BAF,Belgian Air Force
+BWI,Baltimore/Washington International Thurgood Marshall Airport
+CAAC,Civil Aviation Administration of China
+CAAS,Civil Aviation Authorization of Singapore
+CANSO,Civil Air Navigation Services Organization
+CAS,Calibrated Airspeed
+CAT,Category of Aircraft
+CAVOK,Ceiling And Visibility OK
+CCBC,Community College Baltimore County
+COG,Center of Gravity
+COTS,Commercial-of-the-shelf
+CRDA,Converging Runway Display Aid
+CTA,Controlled Time of Arrival
+CTA,Controlled Area
+CTOT,Calculated Take-Off Time
+CTR,Control Zone or Controlled Traffic Region
+DAS,DFS Aviation Services (DFS subcompany for services outside Germany)
+DCIA,Dependent Converging Instrument Approach
+DFS,Deutsche Flugsicherung (ATC in Germany)
+DGAC,Direction générale de l'aviation civile
+DTI,Direction Technique Innovation
+DW,Downwind
+EAS,Equivalent Airspeed
+EAVA,Estonian Aviation Academy
+ECAC,European Civil Aviation Conference
+EFM,Gesellschaft für Enteisen und Flugzeugschleppen
+ETA,Estimated Time of Arrival
+ETOPS,Extended Range Twin-engine Aircraft Operations
+FAA,Federal Aviation Administration (USA)
+FAT,Factory Acceptance Test (see also SAT and RAT)
+FE,Field Elevation (highest point of an airport’s usable runways and is measured in height above mean sea level)
+FIA,Flight Information Area
+FIR,Flight Information Region
+FL,Flight Level
+FMG,Flughafen München GmbH
+FOD,Foreign Object Debris
+FOV,Field of View
+GP,Glide Path
+GPS,Global Positioning System
+GS,Ground Speed or Glideslope
+HKIA,Hong Kong International Airport
+IAA,Israeli Airport Authority
+IAF,Israeli Air Force
+IANS,Institute of Air Navigation Services, a division of Eurocontrol
+IAS,Indicated Air Speed
+IATA,International Air Transport Association, HQ in Montreal, Canada
+IG,Image Generator
+IGLR,Integrated Ground Lighting and Radar
+IMC,Instrument Meteorological Conditions
+KAT,Kaufbeuren ATM Training (DFS subcompany)
+LAA,Lappland Aviation Academy
+LL,Lower Limit
+LMUK,Lockheed Martin UK
+LOD,Level of Detail
+LTA,Lower Traffic Area
+LVNL,Luchtverkeersleiding Nederland (Air Traffic Control the Netherlands)
+LVP,Low Visibility Procedures
+MATS,Malta Air Traffic Services
+MEA,Minimum En-route Altitude
+METAR,Meteorological Aerodrome Report
+MSL,Median Sea Level
+OCTA,Outside Control Areas
+PAPI,Precision Approach Path Indicator
+PAR,Precision Approach Radar
+POH,Pilot's Operating Handbook
+PPL,Private Pilot License
+QFE,the altimeter setting that will cause the altimeter to read the height above a specific aerodrome or ground level, and therefore read zero on landing
+QNE,pressure altitude at the landing runway threshold
+QNH,atmospheric pressure adjusted to mean sea level
+RAT,Reliability Acceptance Test (see also FAT and SAT)
+RBAF,Royal Belgium Armed Forces
+RCAF,Royal Canadian Air Force
+RET,Rapid Exit Taxiways
+RJAF,Royal Jordanian Air Force
+RPI,Runway Point of Intercept
+RPM,Rotations per Minute
+RVR,Runway Visual Range
+RWY,Runway
+SAT,Site Acceptance Test (see also FAT and RAT)
+SLOC,Slovenia Control
+STARS,Standard Arrival Routes
+SID,Standard Instrument Departure
+SKYGUIDE,ATC Swiss
+SOW,Statement of Work
+SSR,Secondary Surveillance Radar
+SWT,Switch
+TA,Terminal Airspace
+TAS,Terminal Airspace System
+TAS,True Airspeed
+TCAS,Traffic Collision Avoidance System
+TCL,Taxi Center Lights
+TFDM,Terminal Flight Data Management
+TMA,Terminal Control Area
+TSTC,Texas State Technical College
+TWR,Control Tower,
+UAA,University of Alaska Anchorage
+UMASS,University of Massachusetts
+USAF,US Air Force
+UTA,Upper Traffic Area
+V1,Decision speed, the speed beyond which takeoff should no longer be aborted
+V2,Takeoff speed. The speed at which the aircraft may safely be climbed with one engine inoperative
+VASI,Visual Approach Slope Indicator
+VHF,Very High Frequency
+VMO,maximum operation speed is the air speed than should never be exceeded deliberately in normal operation, whatever the flight situation is
+VOR,VHF Omni-directional Range
+VREF,1.3 times the stalling speed of the aircraft in the stated landing configuration and at the prevailing aircraft weight
+VRR,Voice Recognition & Response
+VS,Stall speed, defined as the minimum steady flight speed at which the airplane is controllable
+VTC,Visual Terminal Chart
+VTOL,vertical take-off and landing
+VSTOL,vertical short take-off and landing
+VTOSL,vertical take-off and short landing
+WTC,Wake Turbulence Category

Data/Abbr/IATA-airport-code.csv

@@ -0,0 +1,5 @@
+Abbreviation,Definition
+ATL,Hartsfield-Jackson Atlanta International Airport (USA)
+CAN,Guangzhou Baiyun International Airport (China)
+CTU,Chengdu Shuangliu International Airport (China)
+DFW,Dallas/Fort Worth International Airport (USA)

Data/Abbr/ICAO-airport-code.csv

@@ -0,0 +1,7 @@
+Abbreviation,Definition
+KATL,Hartsfield-Jackson Atlanta International Airport (USA)
+KDFW,Dallas/Fort Worth International Airport (USA)
+WSSL,Seletar Airport (Singapore)
+WSSS,Singapore Changi Airport (Singapore)
+ZGGG,Guangzhou Baiyun International Airport (China)
+ZUUU,Chengdu Shuangliu International Airport (China)

Data/Abbr/Military.csv

@@ -0,0 +1,8 @@
+Abbreviation,Definition
+EOD,Explosive Ordnance Disposal
+HQ,Headquarters
+OP,Observation Post
+POW,Prisoner of War
+RPG,Rocket Propelled Grenade
+SOP,Standard Operating Procedure
+TS,Top Secret

Data/Abbr/Organizations.csv

@@ -0,0 +1,2 @@
+Abbreviation,Definition
+ISO,International Organization for Standardization

Data/Abbr/aviation.csv

@@ -1,50 +0,0 @@
-Abbreviation,Definition
-AB,Air Base
-AC,Aircraft
-ACAS,Airborne Collision Avoidance System
-ACC,Area Control Centre
-AF,Air Field
-AFM,Aircraft Flight Manual
-AIP,Aeronautical Information Publication
-AMAN,Arrival Manager
-AOA,Angle of Attack
-AOM,Airplane Operating Manual
-AOR,Area of Responsibility
-AFIS,Aerodrome Flight Information Service
-AFM,Airplane Flight Manual
-AGL,Above Ground Level
-AIP,Aeronautical Information Publication
-ANSP,Air Navigation Service Provider
-ARTCC,Air Route Traffic Control Centre
-ASB,Airspace Block
-ATA,Actual Time of Arrival
-ATC,Air Traffic Control
-ATIS,Automatic Terminal Information Service
-ATO,Air Traffic Organization
-BAF,Belgian Air Force
-CAAC,Civil Aviation Administration of China
-CAAS,Civil Aviation Authorization of Singapore
-CANSO,Civil Air Navigation Services Organization
-CAS,Calibrated Airspeed
-CAT,Category of Aircraft
-CAVOK,Ceiling And Visibility OK
-COG,Center of Gravity
-CRDA,Converging Runway Display Aid
-CTA,Controlled Time of Arrival
-CTA,Controlled Area
-CTOT,Calculated Take-Off Time
-CTR,Control Zone or Controlled Traffic Region
-ECAC,European Civil Aviation Conference
-FIA,Flight Information Area
-FIR,Flight Information Region
-FL,Flight Level
-IAS,Indicated Air Speed
-LL,Lower Limit
-LTA,Lower Traffic Area
-MEA,Minimum En-route Altitude
-OCTA,Outside Control Areas
-TA,Terminal Airspace
-TAS,Terminal Airspace System
-TMA,Terminal Control Area
-UTA,Upper Traffic Area
-VTC,Visual Terminal Chart

Data/Sounds/README.txt

@@ -0,0 +1 @@
+Animal Sounds by freeanimalsounds.org

Data/Templates/serenade.txt

@@ -0,0 +1 @@
+/* Exported by export-scripts2serenade.ps1 */

Data/domain-names.csv

@@ -1,15 +1,9 @@
 Domain
-3sat.de
-access.ing.de
 accounts.google.com
 activity.windows.com
 airbnb.com
 airbnb.de
 aka.ms
-aldi-nord.de
-aldi-sued.de
-all-in.de
-allgaeuer-zeitung.de
 alternate.de
 api.dropboxapi.com
 api.met.no
@@ -20,19 +14,14 @@ assets.msn.com
 amazon.com
 amazon.de
 amazon.fr
-atcsim.de
 banking.ing-diba.de
-bergwelten.com
-bild.de
 bing.com
 bing.de
 bing.fr
 blitzortung.org
 bolt.dropbox.com
-br.de
 catalog.gamepass.com
 changelogs.ubuntu.com
-chip.de
 client.dropbox.com
 client.wns.windows.com
 clients1.google.com
@@ -54,18 +43,14 @@ earth.google.com
 ebay.com
 ebay.de
 ebay.fr
-ebay-kleinanzeigen.de
 ebook3000.com
 facebook.com
 facebook.de
 facebook.fr
-fleschutz.de
 flightradar24.com
-focus.de
 fonts.google.com
 fonts.googleapis.com
 fonts.gstatic.com
-fosbos-kempten.de
 github.com
 github.map.fastly.net
 gmail.com
@@ -83,50 +68,40 @@ IEEE.org
 ibm.com
 icons8.com
 imap.googlemail.com
-ing.de
 install.robertsspaceindustries.com
 ipfs.io
 ipv6.msftconnecttest.com
 launcher2.robertsspaceindustries.com
 licensing.mp.microsoft.com
-lidl.de
 live.github.com
 live.thunderbird.net
 livepatch.canonical.com
 login.live.com
-login.hrworks.de
 longfiles.com
 mail.google.com
 map.blitzortung.org
 maps.google.com
 maps.google.de
 maps.google.fr
-mebis.bayern.de
 microsoft.com
 mozilla.org
 mtalk.google.com
 music.google.com
-mwittrien.github.io
-netbeat.de
 netflix.com
 news.google.com
 news.google.de
 news.google.fr
 news.url.google.com
-notube.net
 ogs.google.com
 opera.com
 photos.google.com
 pixabay.com
 play.google.com
 plex.tv
-posaunenchor-guenzach.de
 presence.teams.microsoft.com
 ptbtime1.ptb.de
 ptbtime2.ptb.de
 ptbtime3.ptb.de
-rb-allgaeuerland.de
-realschule-oberguenzburg.de
 redbull.tv
 redhat.com
 reichelt.de
@@ -148,7 +123,6 @@ storage.googleapis.com
 substrate.office.com
 t-online.de
 t0.gstatic.com
-tchibo.de
 teams.microsoft.com
 techstage.de
 telemetry.dropbox.com
@@ -161,12 +135,9 @@ translate.google.de
 twitter.com
 twitter.de
 ubuntu.com
-ufainc.com
 update.googleapis.com
 wetter.com
-wetter.de
 wired.com
-ws-kempten.de
 wttr.in
 www.google.com
 www.googleapis.com
@@ -175,4 +146,3 @@ www.netflix.com
 www.youtube.com
 youtube.com
 youtube.de
-zdf.de

Data/scripts.csv

@@ -1,251 +1,293 @@
 Script,Description
-add-firewall-rules.ps1, adds firewall rules to the given executables (needs admin rights)
+add-firewall-rules.ps1, Adds firewall rules to the given executables (needs admin rights)
-add-memo.ps1, adds the given memo text to $HOME/Memos.csv
+add-memo.ps1, Adds the given memo text to $HOME/Memos.csv
-cd-desktop.ps1, go to the user's desktop folder
+build-repo.ps1, Builds a Git repository 
-cd-docs.ps1, go to the user's documents folder
+build-repos.ps1, Builds all Git repositories in a folder
-cd-downloads.ps1, go to the user's downloads folder
+cd-autostart.ps1, Set the working directory to the user's autostart folder
-cd-dropbox.ps1, go to the user's Dropbox folder
+cd-desktop.ps1, Set the working directory to the user's desktop folder
-cd-home.ps1, go to the user's home folder
+cd-docs.ps1, Set the working directory to the user's documents folder
-cd-music.ps1, go to the user's music folder
+cd-downloads.ps1, Set the working directory to the user's downloads folder
-cd-onedrive.ps1, go to the user's OneDrive folder
+cd-dropbox.ps1, Set the working directory to the user's Dropbox folder
-cd-pics.ps1, go to the user's pictures folder
+cd-home.ps1, Set the working directory to the user's home folder
-cd-recycle-bin.ps1, go to the user's recycle bin folder
+cd-music.ps1, Set the working directory to the user's music folder
-cd-repos.ps1, go to the user's Git repositories folder
+cd-onedrive.ps1, Set the working directory to the user's OneDrive folder
-cd-root.ps1, go to the root directory (C: on Windows)
+cd-pics.ps1, Set the working directory to the user's pictures folder
-cd-scripts.ps1, go to the PowerShell Scripts folder
+cd-recycle-bin.ps1, Set the working directory to the user's recycle bin folder
-cd-up.ps1, go one directory level up
+cd-repos.ps1, Set the working directory to the user's Git repositories folder
-cd-up2.ps1, go two directory levels up
+cd-root.ps1, Set the working directory to the root directory (C: on Windows)
-cd-up3.ps1, go three directory levels up
+cd-scripts.ps1, Set the working directory to the PowerShell Scripts folder
-cd-up4.ps1, go four directory levels up
+cd-ssh.ps1, Set the working directory to the user's SSH folder
-cd-videos.ps1, go to the user's videos folder
+cd-up.ps1, Set the working directory to one directory level up
-check-cpu-temp.ps1, checks the CPU temperature
+cd-up2.ps1, Set the working directory to two directory levels up
-check-dns-resolution.ps1, checks the DNS resolution with frequently used domain names
+cd-up3.ps1, Set the working directory to three directory levels up
-check-drive-space.ps1, checks the given drive for free space left
+cd-up4.ps1, Set the working directory to four directory levels up
-check-file-system.ps1, checks the validity of the file system (needs admin rights)
+cd-videos.ps1, Set the working directory to the user's videos folder
-check-health.ps1, checks the system health
+check-cpu-temp.ps1, Checks the CPU temperature
-check-ipv4-address.ps1, checks the given IPv4 address for validity
+check-dns-resolution.ps1, Checks the DNS resolution with frequently used domain names
-check-ipv6-address.ps1, checks the given IPv6 address for validity
+check-drive-space.ps1, Checks a drive for free space left
-check-mac-address.ps1, checks the given MAC address for validity
+check-file-system.ps1, Checks the file system of a drive (needs admin rights)
-check-ping.ps1, checks the ping latency to the internet
+check-health.ps1, Checks the system health
-check-subnet-mask.ps1, checks the given subnet mask for validity
+check-ipv4-address.ps1, Checks the given IPv4 address for validity
-check-swap-space.ps1, checks the swap space for free space left
+check-ipv6-address.ps1, Checks the given IPv6 address for validity
-check-symlinks.ps1, checks every symlink in the given directory tree
+check-mac-address.ps1, Checks the given MAC address for validity
-check-weather.ps1, checks the current weather for critical values
+check-ping.ps1, Checks the ping latency to the internet
-check-windows-system-files.ps1, checks the validity of the Windows system files 
+check-subnet-mask.ps1, Checks the given subnet mask for validity
-check-xml-file.ps1, checks the given XML file for validity
+check-swap-space.ps1, Checks the swap space for free space left
-cherry-picker.ps1, cherry-picks a Git commit into multiple branches
+check-symlinks.ps1, Checks every symlink in a directory tree
-clean-repo.ps1, cleans the current/given Git repository from untracked files (including submodules)
+check-weather.ps1, Checks the current weather for critical values
-clean-repos.ps1, cleans all Git repositories under the current/given directory from untracked files (including submodules)
+check-windows-system-files.ps1, Checks the validity of the Windows system files 
-clear-recycle-bin.ps1, removes the content of the recycle bin folder (can not be undo!)
+check-xml-file.ps1, Checks the given XML file for validity
-clone-repos.ps1, clones well-known Git repositories
+clean-repo.ps1, Cleans the current/given Git repository from untracked files (including submodules)
-close-calculator.ps1, closes the calculator program gracefully
+clean-repos.ps1, Cleans all Git repositories under the current/given directory from untracked files (including submodules)
-close-chrome.ps1, closes Google Chrome gracefully
+clear-recycle-bin.ps1, Removes the content of the recycle bin folder (can not be undo!)
-close-cortana.ps1, closes Cortana gracefully
+clone-repos.ps1, Clones well-known Git repositories
-close-edge.ps1, closes Microsoft Edge gracefully
+close-calculator.ps1, Closes the calculator program gracefully
-close-file-explorer.ps1, closes Microsoft File Explorer gracefully
+close-cortana.ps1, Closes Cortana gracefully
-close-firefox.ps1, closes the Firefox Web browser gracefully
+close-file-explorer.ps1, Closes Microsoft File Explorer gracefully
-close-program.ps1, closes the given program gracefully
+close-google-chrome.ps1, Closes the Google Chrome Web browser
-close-netflix.ps1, closes Netflix gracefully
+close-program.ps1, Closes the given program gracefully
-close-onedrive.ps1, closes Microsoft OneDrive gracefully
+close-microsoft-edge.ps1, Closes the Microsoft Edge Web browser
-close-system-settings.ps1, closes the System Settings gracefully
+close-microsoft-store.ps1, Closes the Microsoft Store app
-close-thunderbird.ps1, closes Mozilla Thunderbird gracefully
+close-mozilla-firefox.ps1, Closes the Mozilla Firefox Web browser 
-close-vlc.ps1, closes the VLC media player gracefully
+close-netflix.ps1, Closes the Netflix application gracefully
-close-windows-terminal.ps1, closes Windows Terminal gracefully
+close-onedrive.ps1, Closes Microsoft OneDrive gracefully
-copy-photos-sorted.ps1, Copies all photos sorted by year and month 
+close-serenade.ps1, Closes the Serenade.ai application gracefully
-configure-git.ps1, sets up the Git user configuration
+close-snipping-tool.ps1, Closes the Snipping Tool application gracefully
-convert-csv2txt.ps1, converts the given CSV file into a text list
+close-spotify.ps1, Closes Spotify
-convert-mysql2csv.ps1, converts the MySQL database table to a CSV file
+close-system-settings.ps1, Closes the System Settings gracefully
-convert-ps2bat.ps1, converts PowerShell script(s) to .bat files
+close-thunderbird.ps1, Closes Mozilla Thunderbird gracefully
-convert-ps2md.ps1, converts the comment-based help of a PowerShell script to Markdown
+close-vlc.ps1, Closes the VLC media player application
-convert-sql2csv.ps1, converts the SQL database table to a CSV file
+close-windows-terminal.ps1, Closes the Windows Terminal application
-convert-txt2wav.ps1, converts text into a audio .WAV file
+copy-photos-sorted.ps1, Copy image files sorted by year and month 
-daily-tasks.sh, execute PowerShell scripts automatically as daily tasks (Linux only)
+configure-git.ps1, Sets up the Git user configuration
-decrypt-file.ps1, decrypts the given file
+convert-csv2txt.ps1, Converts the given CSV file into a text list
-display-time.ps1, displays the current time for 10 seconds by default
+convert-mysql2csv.ps1, Converts the MySQL database table to a CSV file
-download-dir.ps1, downloads a directory tree from the given URL
+convert-ps2bat.ps1, Converts PowerShell script(s) to .bat files
-download-file.ps1, downloads a file from the given URL
+convert-ps2md.ps1, Converts the comment-based help of a PowerShell script to Markdown
-edit.ps1, edits the given file with the built-in text editor
+convert-sql2csv.ps1, Converts the SQL database table to a CSV file
-enable-crash-dumps.ps1, enables the writing of crash dumps
+convert-txt2wav.ps1, Converts text into a audio .WAV file
-enable-god-mode.ps1, enables the god mode (adds a new icon to the desktop)
+daily-tasks.sh, Execute PowerShell scripts automatically as daily tasks (Linux only)
-encrypt-file.ps1, encrypts the given file
+decrypt-file.ps1, Decrypts the given file
-fetch-repo.ps1, fetches updates for the current/given Git repository (including submodules)
+display-time.ps1, Displays the current time for 10 seconds by default
-fetch-repos.ps1, fetches updates for all Git repositories under the current/given directory (including submodules)
+download-dir.ps1, Downloads a directory tree from the given URL
-generate-qrcode.ps1, generates a QR code
+download-file.ps1, Downloads a file from the given URL
-hibernate.ps1, enables hibernate mode for the local computer (needs admin rights)
+edit.ps1, Edits the given file with the built-in text editor
-inspect-exe.ps1, prints basic information of the given executable file
+enable-crash-dumps.ps1, Enables the writing of crash dumps
-install-github-cli.ps1, installs GitHub CLI
+enable-god-mode.ps1, Enables the god mode (adds a new icon to the desktop)
-install-google-chrome.ps1, installs the Google Chrome browser
+encrypt-file.ps1, Encrypts the given file
-install-knot-resolver.ps1, installs the Knot Resolver (needs admin rights)
+export-to-manuals.ps1, Converts all scripts as manuals                                    
-install-signal-cli.ps1, installs signal-cli from github.com/AsamK/signal-cli
+export-to-serenade.ps1, Converts all scripts to Serenade for voice control
-install-ssh-client.ps1, installs the SSH client (needs admin rights)
+fetch-repo.ps1, Fetches updates for the current/given Git repository (including submodules)
-install-ssh-server.ps1, installs the SSH server (needs admin rights)
+fetch-repos.ps1, Fetches updates for all Git repositories under the current/given directory (including submodules)
-install-vscode.ps1, installs Visual Studio Code 
+get-md5.ps1, Prints the MD5 checksum of the given file
-install-wsl.ps1, installs Windows Subsystem for Linux (WSL), needs admin rights
+get-sha1.ps1, Prints the SHA1 checksum of the given file
-introduce-powershell.ps1, introduces PowerShell to new users
+get-sha256.ps1, Prints the SHA256 checksum of the given file
-list-aliases.ps1, lists all PowerShell aliases 
+hibernate.ps1, Enables hibernate mode for the local computer (needs admin rights)
-list-anagrams.ps1, lists all anagrams of the given word
+inspect-exe.ps1, Prints basic information of the given executable file
-list-automatic-variables.ps1, lists the automatic variables of PowerShell 
+install-github-cli.ps1, Installs GitHub CLI
-list-branches.ps1, lists all branches in the current/given Git repository 
+install-google-chrome.ps1, Installs the Google Chrome browser
-list-cheat-sheet.ps1, lists the PowerShell cheat sheet
+install-knot-resolver.ps1, Installs the Knot Resolver (needs admin rights)
-list-city-weather.ps1, lists the current weather of cities worldwide (east to west)
+install-signal-cli.ps1, Installs signal-cli from github.com/AsamK/signal-cli
-list-commits.ps1, lists all commits in the current/given Git repository 
+install-ssh-client.ps1, Installs the SSH client (needs admin rights)
-list-console-colors.ps1, lists all console colors
+install-ssh-server.ps1, Installs the SSH server (needs admin rights)
-list-countries.ps1, lists details of all countries
+install-updates.ps1, Installs updates (needs admin rights)
-list-cli-tools.ps1, lists available command-line interface (CLI) tools 
+install-vscode.ps1, Installs Visual Studio Code 
-list-clipboard.ps1, lists the contents of the clipboard
+install-wsl.ps1, Installs Windows Subsystem for Linux (WSL), needs admin rights
-list-credits.ps1, shows the credits
+introduce-powershell.ps1, Introduces PowerShell to new users
-list-crypto-rates.ps1, lists the current crypto exchange rates 
+list-aliases.ps1, Lists all PowerShell aliases 
-list-dir.ps1, lists the directory content (formatted in columns)
+list-anagrams.ps1, Lists all anagrams of the given word
-list-dir-tree.ps1, lists the directory tree content 
+list-automatic-variables.ps1, Lists the automatic variables of PowerShell 
-list-drives.ps1, lists all drives
+list-branches.ps1, Lists all branches in the current/given Git repository 
-list-environment-variables.ps1, lists all environment variables
+list-cheat-sheet.ps1, Lists the PowerShell cheat sheet
-list-emojis.ps1, lists the emojis of Unicode 13.0
+list-city-weather.ps1, Lists the current weather of cities worldwide (east to west)
-list-empty-dirs.ps1, lists empty subfolders within the given directory tree
+list-commits.ps1, Lists all commits in the current/given Git repository 
-list-empty-files.ps1, lists empty files within the given directory tree
+list-console-colors.ps1, Lists all console colors
-list-files.ps1, lists all files in the given folder and also in every subfolder
+list-countries.ps1, Lists details of all countries
-list-fritzbox-calls.ps1, lists the FRITZ!Box calls
+list-cli-tools.ps1, Lists available command-line interface (CLI) tools 
-list-fritzbox-devices.ps1, lists FRITZ!Box's known devices 
+list-clipboard.ps1, Lists the contents of the clipboard
-list-hidden-files.ps1, lists hidden files within the given directory tree
+list-credits.ps1, Shows the credits
-list-installed-apps.ps1, lists the installed Windows Store apps
+list-crypto-rates.ps1, Lists the current crypto exchange rates 
-list-installed-software.ps1, lists the installed software (except Windows Store apps)
+list-dir-tree.ps1, Lists the directory tree content 
-list-latest-tag.ps1, lists the latest tag on the current branch in a Git repository
+list-drives.ps1, Lists all drives
-list-latest-tags.ps1, lists the latests tags in all Git repositories under the current/given directory 
+list-environment-variables.ps1, Lists all environment variables
-list-memos.ps1, lists the memos at $HOME/Memos.csv
+list-emojis.ps1, Lists the emojis of Unicode 13.0
-list-unused-files.ps1, lists unused files in a directory tree
+list-empty-dirs.ps1, Lists empty subfolders within the given directory tree
-list-cmdlets.ps1, lists the PowerShell cmdlets
+list-empty-files.ps1, Lists empty files within the given directory tree
-list-earthquakes.ps1, lists earthquakes with magnitude >= 6.0 for the last 30 days
+list-files.ps1, Lists all files in the given folder and also in every subfolder
-list-exchange-rates.ps1, lists the exchange rates for the given currency 
+list-folder.ps1, Lists the folder content 
-list-modules.ps1, lists the PowerShell modules
+list-fritzbox-calls.ps1, Lists the FRITZ!Box calls
-list-mysql-tables.ps1, lists the MySQL server tables
+list-fritzbox-devices.ps1, Lists FRITZ!Box's known devices 
-list-network-shares.ps1, lists the network shares of the local computer
+list-hidden-files.ps1, Lists hidden files within the given directory tree
-list-news.ps1, lists the latest news
+list-installed-apps.ps1, Lists the installed Windows Store apps
-list-os-releases.ps1, lists operating system releases and download URL 
+list-installed-software.ps1, Lists the installed software (except Windows Store apps)
-list-os-updates.ps1, lists operating system updates
+list-latest-tag.ps1, Lists the latest tag on the current branch in a Git repository
-list-passwords.ps1, prints a list of random passwords
+list-latest-tags.ps1, Lists the latests tags in all Git repositories under the current/given directory 
-list-pins.ps1, prints a list of random PIN's
+list-memos.ps1, Lists the memos at $HOME/Memos.csv
-list-printers.ps1, lists all printer known to the computer
+list-unused-files.ps1, Lists unused files in a directory tree
-list-print-jobs.ps1, lists all jobs of all printers
+list-cmdlets.ps1, Lists the PowerShell cmdlets
-list-processes.ps1, lists the local computer processes
+list-earthquakes.ps1, Lists earthquakes with magnitude >= 6.0 for the last 30 days
-list-profiles.ps1, lists your PowerShell profiles
+list-exchange-rates.ps1, Lists the exchange rates for the given currency 
-list-recycle-bin.ps1, lists the content of the recycle bin folder
+list-modules.ps1, Lists the PowerShell modules
-list-scripts.ps1, lists all PowerShell scripts in this repository
+list-mysql-tables.ps1, Lists the MySQL server tables
-list-services.ps1, lists the services on the local computer
+list-network-shares.ps1, Lists the network shares of the local computer
-list-sql-tables.ps1, lists the SQL server tables
+list-news.ps1, Lists the latest news
-list-submodules.ps1, lists the submodules of the current/given Git repository
+list-os-releases.ps1, Lists operating system releases and download URL 
-list-system-info.ps1, lists system information on the local computer
+list-os-updates.ps1, Lists operating system updates
-list-tags.ps1, lists all tags in the current/given Git repository 
+list-passwords.ps1, Prints a list of random passwords
-list-tasks.ps1, lists all Windows scheduler tasks
+list-pins.ps1, Prints a list of random PIN's
-list-timezone.ps1, lists the current time zone details
+list-printers.ps1, Lists all printer known to the computer
-list-timezones.ps1, lists all time zones available 
+list-print-jobs.ps1, Lists all jobs of all printers
-list-tiobe-index.ps1, lists the TIOBE index of top programming languages
+list-processes.ps1, Lists the local computer processes
-list-user-groups.ps1, lists the user groups on the local computer
+list-profiles.ps1, Lists your PowerShell profiles
-list-voices.ps1, lists the installed text-to-speech (TTS) voices
+list-recycle-bin.ps1, Lists the content of the recycle bin folder
-list-weather.ps1, lists the hourly weather 
+list-scripts.ps1, Lists all PowerShell scripts in this repository
-list-workdir.ps1, lists the current working directory
+list-services.ps1, Lists the services on the local computer
-locate-city.ps1, prints the geographic location of the given city
+list-sql-tables.ps1, Lists the SQL server tables
-locate-ipaddress.ps1, prints the geographic location of the given IP address
+list-submodules.ps1, Lists the submodules of the current/given Git repository
-locate-zip-code.ps1, prints the geographic location of the given zip-code
+list-system-info.ps1, Lists system information on the local computer
-MD5.ps1, prints the MD5 checksum of the given file
+list-tags.ps1, Lists all tags in the current/given Git repository 
-make-install.ps1, installs built executables and libs to the installation directory
+list-tasks.ps1, Lists all Windows scheduler tasks
-make-repo.ps1, builds the current/given Git repository 
+list-timezone.ps1, Lists the current time zone details
-make-repos.ps1, builds all Git repositories under the current/given directory
+list-timezones.ps1, Lists all time zones available 
-moon.ps1, prints the current moon phase
+list-tiobe-index.ps1, Lists the TIOBE index of top programming languages
-mute-audio.ps1, mutes audio
+list-user-groups.ps1, Lists the user groups on the local computer
-open-browser.ps1, starts the default Web browser
+list-voices.ps1, Lists the installed text-to-speech (TTS) voices
-open-calculator.ps1, starts the calculator program
+list-weather.ps1, Lists the hourly weather 
-open-email-client.ps1, starts the default email client
+list-workdir.ps1, Lists the current working directory
-open-file-explorer.ps1, starts the Microsoft File Explorer
+locate-city.ps1, Prints the geographic location of the given city
-open-netflix.ps1, starts the Netflix app
+locate-ipaddress.ps1, Prints the geographic location of the given IP address
-open-onedrive.ps1, opens the user's OneDrive folder 
+locate-zip-code.ps1, Prints the geographic location of the given zip-code
-open-recycle-bin.ps1, starts the File Explorer with the recycle bin folder
+make-install.ps1, Installs built executables and libs to the installation directory
-play-beep.ps1, plays a beep sound
+moon.ps1, Prints the current moon phase
-play-files.ps1, plays the given audio files
+mute-audio.ps1, Mutes the audio device
-play-happy-birthday.ps1, plays the Happy Birthday song
+open-amazon.ps1, Opens Amazon's website
-play-imperial-march.ps1, plays the Imperial March (Star Wars)
+open-browser.ps1, Starts the default Web browser
-play-jingle-bells.ps1, plays Jingle Bells
+open-calculator.ps1, Starts the calculator program
-play-mission-impossible.ps1, plays the Mission Impossible theme
+open-c-drive.ps1, Opens the C: drive folder
-play-m3u.ps1, plays the given playlist (M3U file format)
+open-downloads-folder.ps1, Opens the user's downloads folder
-play-mp3.ps1, plays the given sound file (MP3 file format)
+open-dropbox-folder.ps1, Opens the user's Dropbox folder
-play-super-mario.ps1, plays the Super Mario Intro
+open-email-client.ps1, Starts the default email client
-play-tetris-melody.ps1, plays the Tetris melody
+open-facebook.ps1, Opens Facebook's website
-poweroff.ps1, halts the local computer (needs admin rights)
+open-file-explorer.ps1, Opens the File Explorer
-publish-to-ipfs.ps1, publishes the given files or directory to IPFS
+open-fritz-box.ps1, Opens FRITZ!Box's web interface
-pull-repo.ps1, pulls updates for the current/given Git repository (including submodules)
+open-github.ps1, Opens GitHub's website
-pull-repos.ps1, pulls updates for all Git repositories under the current/given directory (including submodules)
+open-google-contacts.ps1, Opens Google Contacts
-query-smart-data.ps1, queries the S.M.A.R.T. data of your HDD/SSD's and saves it to the current/given directory
+open-google-earth.ps1, Opens Google Earth
-new-branch.ps1, creates a new branch in the current/given Git repository 
+open-google-maps.ps1, Opens Google Maps
-new-email.ps1, starts the default email client to write a new email
+open-google-mail.ps1, Opens Google Mail
-new-script.ps1, creates a new PowerShell script
+open-google-news.ps1, Opens Google News
-new-shortcut.ps1, creates a new shortcut
+open-google-play.ps1, Opens Google Play
-new-symlink.ps1, creates a new symbolic link
+open-google-search.ps1, Opens Google Search
-new-tag.ps1, creates a new tag in a Git repository 
+open-google-translate.ps1, Opens Google Translate
-reboot.ps1, reboots the local computer (needs admin rights)
+open-home-folder.ps1, Opens the user's home folder
-reboot-fritzbox.ps1, reboots the FRITZ!box device
+open-music-folder.ps1, Opens the user's music folder
-remove-empty-dirs.ps1, removes empty subfolders within the given directory tree
+open-microsoft-edge.ps1, Launches the Microsoft Edge Web browser
-remove-print-jobs.ps1, removes all jobs from all printers
+open-microsoft-store.ps1, Starts the Microsoft Store app
-restart-network-adapters.ps1, restarts all local network adapters
+open-netflix.ps1, Starts the Netflix app
-search-filename.ps1, searches the directory tree for filenames by given pattern 
+open-notepad.ps1, Starts the Notepad app
-search-files.ps1, searches the given pattern in the given files
+open-onedrive-folder.ps1, Opens the user's OneDrive folder 
-scan-ports.ps1, scans the network for open/closed ports
+open-recycle-bin.ps1, Opens the user's recycle bin folder
-send-email.ps1, sends an email message
+open-repos-folder.ps1, Opens the user's Git repositories folder
-send-tcp.ps1, sends a TCP message to the given IP address and port
+open-snipping-tools.ps1, Opens the Snipping Tool
-send-udp.ps1, sends a UDP datagram message to the given IP address and port
+open-speed-test.ps1, Opens Cloudflare's speed test
-set-profile.ps1, updates your PowerShell user profile
+open-spotify.ps1, Opens the Spotify app
-set-timer.ps1, sets a timer for a countdown
+open-system-settings.ps1, Launches the Windows system settings 
-set-wallpaper.ps1, sets the given image as wallpaper
+open-task-manager.ps1, Launches the Task Manager
-SHA1.ps1, prints the SHA1 checksum of the given file
+open-toggl-track.ps1, Opens Toggl Track
-SHA256.ps1, prints the SHA256 checksum of the given file
+open-videos-folder.ps1, Opens the user's videos folder
-simulate-matrix.ps1, simulates the Matrix (fun)
+open-windows-terminal.ps1, Launches Windows Terminal
-simulate-presence.ps1, simulates the human presence against burglars
+open-wikipedia.ps1, Opens Wikipedia's website
-speak-checklist.ps1, speaks the given checklist by text-to-speech (TTS)
+open-youtube.ps1, Opens YouTube.com
-speak-countdown.ps1, starts a countdown by text-to-speech (TTS)
+pick-commit.ps1, Cherry-picks a Git commit into multiple branches
-speak-date.ps1, speaks the current date by text-to-speech (TTS)
+play-beep-sound.ps1, Plays a short beep sound
-speak-english.ps1, speaks the given text with an English text-to-speech (TTS) voice
+play-files.ps1, Plays the given audio files
-speak-epub.ps1, speaks the content of the given Epub file by text-to-speech (TTS)
+play-happy-birthday.ps1, Plays the Happy Birthday song
-speak-file.ps1, speaks the content of the given text file by text-to-speech (TTS)
+play-imperial-march.ps1, Plays the Imperial March (Star Wars)
-speak-french.ps1, speaks the given text with a French text-to-speech (TTS) voice
+play-jingle-bells.ps1, Plays Jingle Bells
-speak-german.ps1, speaks the given text with a German text-to-speech (TTS) voice
+play-mission-impossible.ps1, Plays the Mission Impossible theme
-speak-italian.ps1, speaks the given text with an Italian text-to-speech (TTS) voice
+play-m3u.ps1, Plays the given playlist (M3U file format)
-speak-joke.ps1, speaks a random Chuck Norris joke by text-to-speech (TTS)
+play-mp3.ps1, Plays the given sound file (MP3 file format)
-speak-quote.ps1, speaks a random quote by text-to-speech (TTS)
+play-super-mario.ps1, Plays the Super Mario Intro
-speak-spanish.ps1, speaks the given text with a Spanish text-to-speech (TTS) voice
+play-tetris-melody.ps1, Plays the Tetris melody
-speak-test.ps1, performs a speak test by text-to-speech (TTS)
+poweroff.ps1, Halts the local computer (needs admin rights)
-speak-text.ps1, speaks the given text by text-to-speech (TTS)
+publish-to-ipfs.ps1, Publishes the given files or directory to IPFS
-speak-time.ps1, speaks the current time by text-to-speech (TTS)
+pull-repo.ps1, Pulls updates for the current/given Git repository (including submodules)
-start-calibre-server.ps1, starts a local Calibre server 
+pull-repos.ps1, Pulls updates for all Git repositories under the current/given directory (including submodules)
-start-ipfs-server.ps1, starts a local IPFS server
+query-smart-data.ps1, Queries the S.M.A.R.T. data of your HDD/SSD's and saves it to the current/given directory
-switch-branch.ps1, switches the branch in the current/given Git repository (including submodules)
+new-branch.ps1, Creates a new branch in the current/given Git repository 
-switch-shelly1.ps1, switches a Shelly1 device in the local network
+new-email.ps1, Starts the default email client to write a new email
-sync-repo.ps1, synchronizes a Git repository by push & pull (including submodules)
+new-qrcode.ps1, Generates a new QR code
-take-screenshot.ps1, takes a single screenshot
+new-script.ps1, Creates a new PowerShell script
-take-screenshots.ps1, takes multiple screenshots
+new-shortcut.ps1, Creates a new shortcut file
-translate-file.ps1, translates the given text file into another language
+new-symlink.ps1, Creates a new symbolic link file
-translate-files.ps1, translates the given text files into any supported language
+new-tag.ps1, Creates a new tag in a Git repository 
-translate-text.ps1, translates the given text into other languages
+new-zipfile.ps1, Creates a new .zip file from a directory
-turn-volume-up.ps1, turns the audio volume up (+10% by default)
+reboot.ps1, Reboots the local computer (needs admin rights)
-turn-volume-down.ps1, turns the audio volume down (-10% by default)
+reboot-fritzbox.ps1, Reboots the FRITZ!box device
-unmute-audio.ps1, unmutes audio
+remind-me.ps1, Creates a scheduled task that will display a popup message
-upgrade-ubuntu.ps1, upgrades Ubuntu Linux to the latest (LTS) release 
+remove-empty-dirs.ps1, Removes empty subfolders within the given directory tree
-upload-file.ps1, uploads the local file to the given FTP server
+remove-print-jobs.ps1, Removes all jobs from all printers
-voice-control.ps1, executes the PowerShell scripts by voice
+remove-tag.ps1, Removes a tag in a Git repository 
-wakeup.ps1, sends a magic packet to the given computer, waking him up
+replace-in-files.ps1, Search and replace a pattern in the given files by the replacement
-weather.ps1, prints the current weather forecast
+restart-network-adapters.ps1, Restarts all local network adapters
-weather-report.ps1, prints the local weather report
+save-screenshot.ps1, Saves a single screenshot
-what-is.ps1, prints a description of the given abbreviation
+say-date.ps1, Say the current date by text-to-speech
-write-animated.ps1, writes animated text
+say-joke.ps1, Say a random Chuck Norris joke by text-to-speech
-write-big.ps1, writes the given text in big letters
+say-quote.ps1, Say a random quote by text-to-speech
-write-blue.ps1, writes the given text in a blue foreground color
+say-time.ps1, Say the current time by text-to-speech
-write-braille.ps1, writes the given text in Braille
+search-filename.ps1, Searches the directory tree for filenames by given pattern 
-write-green.ps1, writes the given text in a green foreground color
+search-files.ps1, Searches the given pattern in the given files
-write-joke.ps1], writes a random Juck Norris joke
+scan-ports.ps1, Scans the network for open/closed ports
-write-lowercase.ps1, writes the given text in lowercase letters
+send-email.ps1, Sends an email message
-write-marquee.ps1, writes the given text as marquee
+send-tcp.ps1, Sends a TCP message to the given IP address and port
-write-morse-code.ps1, writes the given text in Morse code
+send-udp.ps1, Sends a UDP datagram message to the given IP address and port
-write-motd.ps1, writes the message of the day (MOTD)
+set-profile.ps1, Updates your PowerShell user profile
-write-quote.ps1, writes a random quote
+set-timer.ps1, Sets a timer for a countdown
-write-red.ps1, writes the given text in a red foreground color
+set-wallpaper.ps1, Sets the given image as wallpaper
-write-rot13.ps1, encodes or decodes the given text with ROT13
+simulate-matrix.ps1, Simulates the Matrix (fun)
-write-typewriter.ps1, writes the given text with the typewriter effect
+simulate-presence.ps1, Simulates the human presence against burglars
-write-uppercase.ps1, writes the given text in uppercase letters
+speak-checklist.ps1, Speaks the given checklist by text-to-speech
-write-vertical.ps1, writes the given text in vertical direction
+speak-countdown.ps1, Starts a countdown by text-to-speech
-zip-dir.ps1, creates a .zip archive of the given directory
+speak-english.ps1, Speaks the given text with an English text-to-speech voice
+speak-epub.ps1, Speaks the content of the given Epub file by text-to-speech
+speak-file.ps1, Speaks the content of the given text file by text-to-speech
+speak-french.ps1, Speaks the given text with a French text-to-speech voice
+speak-german.ps1, Speaks the given text with a German text-to-speech voice
+speak-italian.ps1, Speaks the given text with an Italian text-to-speech voice
+speak-spanish.ps1, Speaks the given text with a Spanish text-to-speech voice
+speak-test.ps1, Performs a speak test by text-to-speech 
+speak-text.ps1, Speaks the given text by text-to-speech
+start-calibre-server.ps1, Starts a local Calibre server 
+start-ipfs-server.ps1, Starts a local IPFS server
+switch-branch.ps1, Switches the branch in the current/given Git repository (including submodules)
+switch-shelly1.ps1, Switches a Shelly1 device in the local network
+sync-repo.ps1, Synchronizes a Git repository by push & pull (including submodules)
+translate-file.ps1, Translates the given text file into another language
+translate-files.ps1, Translates the given text files into any supported language
+translate-text.ps1, Translates the given text into other languages
+turn-volume-up.ps1, Turns the audio volume up (+10% by default)
+turn-volume-down.ps1, Turns the audio volume down (-10% by default)
+unmute-audio.ps1, Unmutes audio
+upgrade-ubuntu.ps1, Upgrades Ubuntu Linux to the latest (LTS) release 
+upload-file.ps1, Uploads the local file to the given FTP server
+wakeup.ps1, Sends a magic packet to the given computer, waking him up
+weather.ps1, Prints the current weather forecast
+weather-report.ps1, Prints the local weather report
+what-is.ps1, Prints a description of the given abbreviation
+write-animated.ps1, Writes animated text
+write-big.ps1, Writes the given text in big letters
+write-blue.ps1, Writes the given text in a blue foreground color
+write-braille.ps1, Writes the given text in Braille
+write-calendar.ps1, Writes the calendar (month or year)
+write-green.ps1, Writes the given text in a green foreground color
+write-joke.ps1], Writes a random Juck Norris joke
+write-lowercase.ps1, Writes the given text in lowercase letters
+write-marquee.ps1, Writes the given text as marquee
+write-morse-code.ps1, Writes the given text in Morse code
+write-motd.ps1, Writes the message of the day (MOTD)
+write-quote.ps1, Writes a random quote
+write-red.ps1, Writes the given text in a red foreground color
+write-rot13.ps1, Encodes or decodes the given text with ROT13
+write-typewriter.ps1, Writes the given text with the typewriter effect
+write-uppercase.ps1, Writes the given text in uppercase letters
+write-vertical.ps1, Writes the given text in vertical direction

Data/template.ps1

@@ -1,5 +1,4 @@
-#requires -version 4
+<#
-<#
 .SYNOPSIS
 	← enter overview of script here
 .DESCRIPTION
@@ -17,6 +16,8 @@
 	← enter URL here
 #>
 
+#requires -version 4
+
 param() # ← enter script parameters here
 
 #	← enter functions here 

Docs/FAQ.md

@@ -7,34 +7,38 @@ PowerShell is a task automation and configuration management framework from Micr
 
 Why use PowerShell?
 -------------------
-* **it's powerful**: fully control your computer
+✔️ it's **powerful**: fully control your computer
-* **it's cross-platform**: available for Linux, Mac OS and Windows
+
-* **it's open-source and free**: see the Github repository at https://github.com/PowerShell/PowerShell 
+✔️ it's **cross-platform**: available for Linux, Mac OS and Windows
-* **it's easy to learn**: see the tutorial at https://www.guru99.com/powershell-tutorial.html
+
-* **it's fully documented**: see the official docs at https://docs.microsoft.com/en-us/powershell/
+✔️ it's **open-source and free**: see the Github repository at https://github.com/PowerShell/PowerShell 
+
+✔️ it's **easy to learn**: see the tutorial for beginners at https://www.guru99.com/powershell-tutorial.html
+
+✔️ it's **fully documented**: see the PowerShell documentation at https://docs.microsoft.com/en-us/powershell/
 
 How to get PowerShell?
 ----------------------
-* **On Windows 7 and newer** PowerShell is provided by default. However, script execution is **disallowed by default** (execution policy is "restricted"). To enable this, enter as administrator:
+* **Windows 7 and newer** provides PowerShell by default. However, script execution is **disallowed by default** (execution policy is "restricted"). To enable this, enter as administrator:
    ```
    PS> Set-ExecutionPolicy RemoteSigned
    ```
 * **On CentOS, Debian, Docker, Fedora, macOS, openSUSE, Red Hat, Ubuntu** visit https://github.com/PowerShell/PowerShell for installation.
-* **Want to use Snaps?** Install the PowerShell snap by executing:
+* **On Linux supporting Snaps** install PowerShell by executing:
    ```
    $ snap install PowerShell
    $ ln -s /snap/bin/pwsh /usr/bin/pwsh
    ```
 
-How to get the collection of PowerShell scripts?
+How to get the PowerShell Scripts?
-------------------------------------------------
+----------------------------------
 * Git users execute: `$ git clone https://github.com/fleschutz/PowerShell`
-* otherwise download & unzip: https://github.com/fleschutz/PowerShell/archive/master.zip
+* otherwise download and unzip: https://github.com/fleschutz/PowerShell/archive/master.zip
 
 
 Why do some scripts show gibberish characters?
 ----------------------------------------------
-Those PowerShell scripts are using Unicode input & output. Use a modern console supporting UTF-8 such as Windows Terminal, please.
+Those PowerShell scripts are using Unicode characters. Use a modern console supporting UTF-8 such as Windows Terminal, please.
 
 
 How to set PowerShell as default shell on Linux?
@@ -56,6 +60,11 @@ How to use PowerShell in Windows context menus?
 * to disable this execute `Remove_ps1_from_New_context_menu.reg` in subfolder [Data/](../Data)
 
 
+How to execute PowerShell scripts by voice?
+-------------------------------------------
+See the [voice control page](VoiceControl.md) for more information.
+
+
 Which editor to use for PowerShell scripts?
 -------------------------------------------
 * *PowerShell ISE* (Integrated Scripting Environment) - Official PowerShell development environment included with Microsoft Windows.
@@ -72,9 +81,9 @@ How to write good PowerShell scripts?
 Good PowerShell scripts are user-friendly and platform-independant. As a guideline follow these rules, please:
 
 1. the filename is named using the `<verb>-<object>.ps1` scheme
-2. the encoding is UTF-8-BOM to support and use Unicode characters
+2. the encoding is UTF-8-BOM to provide Unicode character support
 3. the script has execute file permissions: chmod a+rx <file> (for Linux support)
-4. provide a comment-based help with syntax, description, link, author, and license
+4. the script provides a comment-based help with synopsis, description, parameters, link, author, and license
 5. check the requirements (e.g. #Requires -RunAsAdministrator, or #Requires -Version 3)
 6. prefer command-line options, else ask the user for help
 7. recommended is `Set-StrictMode -Version Latest` to enable additional error checking
@@ -83,11 +92,11 @@ Good PowerShell scripts are user-friendly and platform-independant. As a guideli
 10. on success exit with error code 0 (exit 0)
 
 
-Found a bug or issue?
+Want to contribute or found a bug or issue?
----------------------
+-------------------------------------------
 If you find something bad (like a bug, error, or any issue), please report it here by open an Issue.
 
-Or even better: Fork the Repository, fix it and submit a pull request, so others can participate too.  
+Or even better: Fork the repository, add or fix the script and submit a pull request, so others can participate too.  
 
 
 Your question is not answered here?

Docs/MD5.ps1.md

@@ -1,14 +0,0 @@
-# Help for MD5.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-*Generated from comment-based help of MD5.ps1 by convert-ps2md.ps1*

Docs/SHA1.ps1.md

@@ -1,14 +0,0 @@
-# Help for SHA1.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-*Generated from comment-based help of SHA1.ps1 by convert-ps2md.ps1*

Docs/SHA256.ps1.md

@@ -1,14 +0,0 @@
-# Help for SHA256.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-*Generated from comment-based help of SHA256.ps1 by convert-ps2md.ps1*

Docs/VoiceControl.md

@@ -0,0 +1,114 @@
+Executing PowerShell Scripts by Voice
+=====================================
+Voice recognition and response (VRR) is so much fun and so comfortable. Just try it for yourself!
+
+
+🔧 Installation
+--------------
+1. Download and install *Serenade* from https://serenade.ai/ (Serenade is freely available for Linux, MacOS, and Windows).
+2. Download and install the *PowerShell Scripts*, then set the search path to it.
+3. Execute: `./export-to-serenade.ps1 Computer` in the *PowerShell Scripts*, this creates a custom JavaScript file at `$HOME/.serenade/scripts/PowerShell.js` using the wake word 'Computer'. Recommended wake words with a high recognition rate are: "Alexa", "Bixby", "Computer", "James", or "Jarvis". In the following the wake word "Computer" is used.
+
+
+🗣 Usage
+-------
+1. Launch *Serenade* and click into the circle to enable Listening mode.
+2. Launch *Windows Terminal* and click into the window.
+3. Speak into the microphone: `Computer, open calculator` - this executes the PowerShell script `open-calculator.ps1` which launches the calculator application.
+
+More supported voice commands are:
+
+`Computer, open` [app]
+----------------------
+* launches the given application - replace [app] by: `3D-Viewer`, `Calculator`, `Git Extensions`, `Microsoft Paint`, `Microsoft Store`, `Netflix`, `Notepad`, `OBS Studio`, `Outlook`, `Paint 3D`, `Spotify`, `Thunderbird`, `Visual Studio`, or `Windows Terminal`.
+* when finished say: "Computer, close [app]" to close the application.
+
+`Computer, check` [name]
+------------------------
+* lets the computer check something - replace [name] by: `CPU`, `date`, `DNS`, `drives`, `Earth` (fun), `operating system`, `ping`, `swap space`, `time`, `time zone`, `up-time`, `VPN`, or `weather`.
+
+`Computer, open` [name] `browser`
+---------------------------------
+* launches the given Web browser or opens a new tab - replace [name] by: `Chrome`, `default`, `Edge`, or `Firefox`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, open` [name] `drive`
+-------------------------------
+* launches the File Explorer with the given drive - replace [name] by: `C:`, `D:`, `E:`, `F:`, or `M:`.
+* when finished say: "Computer, close file explorer" to close the File Explorer.
+
+
+`Computer, open` [name] `folder`
+--------------------------------
+* launches the File Explorer with the given folder - replace [name] by: `autostart`, `desktop`, `documents`, `downloads`, `Dropbox`, `home`, `music`, `OneDrive`, `pictures`, `recycle bin`, `repos`, or `videos`.
+* when finished say: "Computer, close file explorer" to close the File Explorer.
+
+
+`Computer, open` [name] `website`
+---------------------------------
+* launches the default Web browser with the given website - replace [name] by: `Amazon`, `Apple`, `Baidu`, `BBC`, `BitBucket`, `CDC`, `CIA`, `CNN`, `DistroWatch`, `Dropbox`, `eBay`, `Facebook`, `FBI`, `Flipboard`, `FourSquare`, `FRITZ!Box`, `FRITZ!Repeater`, `GitHub`, `GliderTracker`, `HolidayCheck`, `HRworks`, `Instagram`, `IPFS`, `Microsoft`, `NASA`, `NBC`, `Netflix`, `Notepad`, `Outdoor Active`, `PayPal`, `Pinterest`, `Pixabay`, `Plex`, `Slashdot`, `Snap Store`, `Starbucks`, `Tesla`, `TikTok`, `Topo Map`, `Twitter`,  `UFA`, `Unsplash`, `Walmart`, `WhatsApp`, `White House`, `Windy`, `Wikipedia`, `Wired`, `Wolfram Alpha`, `World News`, `Yahoo`, or `YouTube`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, show` [name] `city`
+------------------------------
+* launches the default Web browser with Google Maps at the given city - replace [name] by: `Atlanta`, `Barcelona`, `Berlin`, `Boston`, `Cairo`, `Cape Town`, `Chicago`, `Dallas`, `Denver`, `Dubai`, `Dublin`, `Frankfurt`, `Hamburg`, `Hong Kong`, `Jerusalem`, `Kansas`, `Las Vegas`, `Lissabon`, `London`, `Los Angeles`, `Madrid`, `Mexico`, `Miami`, `Montreal`, `Moscow`, `Munich`, `New York`, `Panama`, `Paris`, `Rome`, `San Francisco`, `Seattle`, `Singapore`, `Sydney`, `Tokyo`, `Toronto`, `Tunis`, `Vienna`, `Washington`, or `Zurich`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, play radio` [name]
+-----------------------------
+* launches the default Web browser and tunes into an internet radio station - replace [name] by: `7`, `Arabella`, `Bob`, `Club Mix`, `Dance FM`, `FFN`, `Galaxy`, `Gong`, `Ibiza`, `Jam FM`, `Kiss Kiss`, `Malibu`, `N-JOY`, `Paloma`, or `You FM`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, play` [name] `sound`
+-------------------------------
+* starts to play the given audio sound - replace [name] by: `bee`, `beep`, `cat`, `cow`, `dog`, `donkey`, `elephant`, `elk`, `frog`, `goat`, `gorilla`, `horse`, `lion`, `parrot`, `pig`, `rattlesnake`, `vulture`, or `wolf`.
+
+
+`Computer, play` [name] `game`
+------------------------------
+* launches the default Web browser and plays the given game - replace [name] by: `2048`, `Chess`, `Cube`, `Pacman`, `Tetris`, `TicTacToe`, or `Tower`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+`Computer, open` [name] `settings`
+----------------------------------
+* launches the Windows settings - replace [name] by: `activation`, `apps`, `background`, `backup`, `bluetooth`, `color`, `date`, `default apps`, `developer`, `display`, `ethernet`, `lockscreen`, `maps`, `printer`, `proxy`, `recovery`, `speech`, `start`, `system` *(the top level settings!)*, `taskbar`, `themes`, `time`, `update`, `USB`, `VPN`, or `Wifi`.
+* when finished say: "Computer, close system settings" to close the Windows settings.
+
+
+`Computer, show` [name] `manual`
+--------------------------------
+* launches the default Web browser with the given manual - replace [name] by: `Azure`, `Bash`, `Blender`, `Chrome`, `Edge`, `Firefox`, `Git`, `OBS Studio`, `PowerShell`, `Serenade`, `Vim`, `Voice` *(yes, this page!)*, or `Windows`.
+* when finished say: "Close tab" or: "Computer, close [name] browser" to close the Web browser.
+
+
+🔊 Audio Voice Commands
+------------------------
+* `Computer, mute audio`
+* `Computer, unmute audio`
+* `Computer, turn volume up`
+* `Computer, turn volume down`
+
+
+💭 Misc Voice Commands
+----------------------
+* `Computer, locate my phone`
+* `Computer, tell joke`
+* `Computer, tell quote`
+
+
+💬 Conversation Commands
+-------------------------
+* `Computer, good morning`
+* `Computer, good evening`
+* `Computer, good night`
+* `Computer, how are you?`
+* `Computer, thank you`
+* `Computer, I'll be back`
+* `Computer, good bye`
+* `Computer, bye-bye`
+* `Computer, see you`

Docs/add-firewall-rules.md

@@ -0,0 +1,38 @@
+## add-firewall-rules.ps1 - Adds firewall rules for executables (needs admin rights)
+
+This script adds firewall rules for the given executable. Administrator rights are required.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/add-firewall-rules.ps1 [[-PathToExecutables] <String>] [<CommonParameters>]
+
+-PathToExecutables <String>
+    Specifies the path to the executables
+    
+    Required?                    false
+    Position?                    1
+    Default value                
+    Accept pipeline input?       false
+    Accept wildcard characters?  false
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./add-firewall-rules C:\MyApp\bin
+Adding firewall rule for C:\MyApp\bin\app1.exe
+Adding firewall rule for C:\MyApp\bin\app2.exe
+...
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of add-firewall-rules.ps1*

Docs/add-firewall-rules.ps1.md

@@ -1,43 +0,0 @@
-# Help for add-firewall-rules.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-add-firewall-rules.ps1 [<path-to-executables>]
-```
-
-Adds firewall rules for the given executables (needs administrator rights).
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/add-firewall-rules.ps1 [[-PathToExecutables] <String>] [<CommonParameters>]
-```
-
-```
--PathToExecutables <String>
-    
-    Required?                    false
-    Position?                    1
-    Default value                
-    Accept pipeline input?       false
-    Accept wildcard characters?  false
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\add-firewall-rules.ps1 C:\MyApp\bin
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of add-firewall-rules.ps1 by convert-ps2md.ps1*

Docs/add-memo.md

@@ -1,38 +1,31 @@
-# Help for write-green.ps1 PowerShell Script
+## add-memo.ps1 - Adds a memo text to $HOME/Memos.csv
 
-## Synopsis & Description
+This script adds the given memo text to $HOME/Memos.csv.
+
+## Parameters
 ```powershell
-write-green.ps1 [<text>]
+/home/markus/Repos/PowerShell/Scripts/add-memo.ps1 [[-text] <String>] [<CommonParameters>]
-```
 
-Writes the given text in a green foreground color.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/write-green.ps1 [[-text] <String>] [<CommonParameters>]
-```
-
-```
 -text <String>
+    Specifies the text to memorize
     
     Required?                    false
     Position?                    1
     Default value                
     Accept pipeline input?       false
     Accept wildcard characters?  false
-```
 
-```
 [<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
     WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
 ```
 
 ## Example
 ```powershell
-PS>.\write-green.ps1 "Hello World"
+PS> ./add-memo "Buy apples"
-```
+✔️ added to 📄/home/markus/Memos.csv
 
+```
 
 ## Notes
 Author: Markus Fleschutz · License: CC0
@@ -40,4 +33,4 @@ Author: Markus Fleschutz · License: CC0
 ## Related Links
 https://github.com/fleschutz/PowerShell
 
-*Generated from comment-based help of write-green.ps1 by convert-ps2md.ps1*
+*Generated by convert-ps2md.ps1 using the comment-based help of add-memo.ps1*

Docs/alert.md

@@ -1,38 +1,30 @@
-# Help for alert.ps1 PowerShell Script
+## alert.ps1 - Handles and escalates an alert
 
-## Synopsis & Description
+This script handles and escalates the given alert message.
+
+## Parameters
 ```powershell
-alert.ps1 [<message>]
+/home/markus/Repos/PowerShell/Scripts/alert.ps1 [[-Message] <String>] [<CommonParameters>]
-```
 
-Handle and escalate the given alert message.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/alert.ps1 [[-Message] <String>] [<CommonParameters>]
-```
-
-```
 -Message <String>
+    Specifies the alert message
     
     Required?                    false
     Position?                    1
     Default value                
     Accept pipeline input?       false
     Accept wildcard characters?  false
-```
 
-```
 [<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
     WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
 ```
 
 ## Example
 ```powershell
-PS>.\alert.ps1 "Harddisk failure"
+PS> ./alert "Harddisk failure"
-```
 
+```
 
 ## Notes
 Author: Markus Fleschutz · License: CC0
@@ -40,4 +32,4 @@ Author: Markus Fleschutz · License: CC0
 ## Related Links
 https://github.com/fleschutz/PowerShell
 
-*Generated from comment-based help of alert.ps1 by convert-ps2md.ps1*
+*Generated by convert-ps2md.ps1 using the comment-based help of alert.ps1*

Docs/build-repo.md

@@ -1,38 +1,30 @@
-# Help for fetch-repo.ps1 PowerShell Script
+## build-repo.ps1 - Builds a Git repository
 
-## Synopsis & Description
+This scripts supports building with cmake, configure, autogen, Imakefile and Makefile.
+
+## Parameters
 ```powershell
-fetch-repo.ps1 [<repo-dir>]
+/home/markus/Repos/PowerShell/Scripts/build-repo.ps1 [[-RepoDir] <String>] [<CommonParameters>]
-```
 
-Fetches updates for a local Git repository (including submodules).
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/fetch-repo.ps1 [[-RepoDir] <String>] [<CommonParameters>]
-```
-
-```
 -RepoDir <String>
+    Specifies the path to the Git repository
     
     Required?                    false
     Position?                    1
     Default value                "$PWD"
     Accept pipeline input?       false
     Accept wildcard characters?  false
-```
 
-```
 [<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
     WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
 ```
 
 ## Example
 ```powershell
-PS>.\fetch-repo.ps1
+PS> ./build-repo C:\MyRepo
-```
 
+```
 
 ## Notes
 Author: Markus Fleschutz · License: CC0
@@ -40,4 +32,4 @@ Author: Markus Fleschutz · License: CC0
 ## Related Links
 https://github.com/fleschutz/PowerShell
 
-*Generated from comment-based help of fetch-repo.ps1 by convert-ps2md.ps1*
+*Generated by convert-ps2md.ps1 using the comment-based help of build-repo.ps1*

Docs/build-repos.md

@@ -1,38 +1,30 @@
-# Help for clone-repos.ps1 PowerShell Script
+## build-repos.ps1 - Builds all Git repositories in a folder
 
-## Synopsis & Description
+This script builds all Git repositories in a given folder.
+
+## Parameters
 ```powershell
-clone-repos.ps1 [<parent-dir>]
+/home/markus/Repos/PowerShell/Scripts/build-repos.ps1 [[-ParentDir] <String>] [<CommonParameters>]
-```
 
-Clones well-known Git repositories under the current/given directory.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/clone-repos.ps1 [[-ParentDir] <String>] [<CommonParameters>]
-```
-
-```
 -ParentDir <String>
+    Specifies the path to the folder containing the Git repositories
     
     Required?                    false
     Position?                    1
     Default value                "$PWD"
     Accept pipeline input?       false
     Accept wildcard characters?  false
-```
 
-```
 [<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
     WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
 ```
 
 ## Example
 ```powershell
-PS>.\clone-repos.ps1 C:\MyRepos
+PS> ./build-repos C:\MyRepos
-```
 
+```
 
 ## Notes
 Author: Markus Fleschutz · License: CC0
@@ -40,4 +32,4 @@ Author: Markus Fleschutz · License: CC0
 ## Related Links
 https://github.com/fleschutz/PowerShell
 
-*Generated from comment-based help of clone-repos.ps1 by convert-ps2md.ps1*
+*Generated by convert-ps2md.ps1 using the comment-based help of build-repos.ps1*

Docs/cd-autostart.md

@@ -0,0 +1,27 @@
+## cd-autostart.ps1 - Sets the working directory to the user's autostart folder
+
+This script changes the working directory to the user's autostart folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-autostart.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-autostart
+📂C:\Users\Markus\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-autostart.ps1*

Docs/cd-desktop.md

@@ -0,0 +1,27 @@
+## cd-desktop.ps1 - Sets the working directory to the user's desktop folder
+
+This script changes the working directory to the user's desktop folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-desktop.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-desktop
+📂/home/markus/Desktop
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-desktop.ps1*

Docs/cd-desktop.ps1.md

@@ -1,33 +0,0 @@
-# Help for cd-desktop.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-cd-desktop.ps1
-```
-
-Go to the user's desktop folder.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/cd-desktop.ps1 [<CommonParameters>]
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\cd-desktop.ps1
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of cd-desktop.ps1 by convert-ps2md.ps1*

Docs/cd-docs.md

@@ -0,0 +1,27 @@
+## cd-docs.ps1 - Sets the working directory to the user's documents folder
+
+This scripts changes the working directory to the user's documents folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-docs.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-docs
+📂/home/markus/Documents
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-docs.ps1*

Docs/cd-docs.ps1.md

@@ -1,33 +0,0 @@
-# Help for cd-docs.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-cd-docs.ps1
-```
-
-Go to the user's documents folder.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/cd-docs.ps1 [<CommonParameters>]
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\cd-docs.ps1
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of cd-docs.ps1 by convert-ps2md.ps1*

Docs/cd-downloads.md

@@ -0,0 +1,27 @@
+## cd-downloads.ps1 - Sets the working directory to the user's downloads folder
+
+This script changes the working directory to the user's downloads folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-downloads.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-downloads
+📂/home/markus/Downloads
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-downloads.ps1*

Docs/cd-downloads.ps1.md

@@ -1,33 +0,0 @@
-# Help for cd-downloads.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-cd-downloads.ps1
-```
-
-Go to the user's downloads folder.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/cd-downloads.ps1 [<CommonParameters>]
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\cd-downloads.ps1
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of cd-downloads.ps1 by convert-ps2md.ps1*

Docs/cd-dropbox.md

@@ -0,0 +1,27 @@
+## cd-dropbox.ps1 - Sets the working directory to the user's Dropbox folder
+
+This script changes the working directory to the user's Dropbox folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-dropbox.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-dropbox
+📂/home/markus/Dropbox
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-dropbox.ps1*

Docs/cd-dropbox.ps1.md

@@ -1,33 +0,0 @@
-# Help for cd-dropbox.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-cd-dropbox.ps1
-```
-
-Go to the user's Dropbox folder.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/cd-dropbox.ps1 [<CommonParameters>]
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\cd-dropbox.ps1
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of cd-dropbox.ps1 by convert-ps2md.ps1*

Docs/cd-home.md

@@ -0,0 +1,27 @@
+## cd-home.ps1 - Sets the working directory to the user's home directory
+
+This script changes the working directory to the user's home directory.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-home.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-home
+📂/home/markus
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-home.ps1*

Docs/cd-home.ps1.md

@@ -1,33 +0,0 @@
-# Help for cd-home.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-cd-home.ps1
-```
-
-Go to the user's home folder.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/cd-home.ps1 [<CommonParameters>]
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\cd-home.ps1
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of cd-home.ps1 by convert-ps2md.ps1*

Docs/cd-music.md

@@ -0,0 +1,27 @@
+## cd-music.ps1 - Sets the working directory to the user's music folder
+
+This script changes the working directory to the user's music folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-music.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-music
+📂/home/markus/Music
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-music.ps1*

Docs/cd-music.ps1.md

@@ -1,33 +0,0 @@
-# Help for cd-music.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-cd-music.ps1
-```
-
-Go to the user's music folder.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/cd-music.ps1 [<CommonParameters>]
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\cd-music.ps1
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of cd-music.ps1 by convert-ps2md.ps1*

Docs/cd-onedrive.md

@@ -0,0 +1,27 @@
+## cd-onedrive.ps1 - Sets the working directory to the user's OneDrive folder
+
+This script changes the working directory to the user's OneDrive folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-onedrive.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-onedrive
+📂/home/markus/OneDrive
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-onedrive.ps1*

Docs/cd-onedrive.ps1.md

@@ -1,33 +0,0 @@
-# Help for cd-onedrive.ps1 PowerShell Script
-
-## Synopsis & Description
-```powershell
-cd-onedrive.ps1
-```
-
-Go to the user's OneDrive folder.
-
-## Syntax & Parameters
-```powershell
-/home/mf/PowerShell/Scripts/cd-onedrive.ps1 [<CommonParameters>]
-```
-
-```
-[<CommonParameters>]
-    This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
-    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
-```
-
-## Example
-```powershell
-PS>.\cd-onedrive.ps1
-```
-
-
-## Notes
-Author: Markus Fleschutz · License: CC0
-
-## Related Links
-https://github.com/fleschutz/PowerShell
-
-*Generated from comment-based help of cd-onedrive.ps1 by convert-ps2md.ps1*

Docs/cd-pics.md

@@ -0,0 +1,27 @@
+## cd-pics.ps1 - Sets the working directory to the user's pictures folder
+
+This script changes the working directory to the user's pictures folder.
+
+## Parameters
+```powershell
+/home/markus/Repos/PowerShell/Scripts/cd-pics.ps1 [<CommonParameters>]
+
+[<CommonParameters>]
+    This script supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, 
+    WarningVariable, OutBuffer, PipelineVariable, and OutVariable.
+```
+
+## Example
+```powershell
+PS> ./cd-pics
+📂/home/markus/Pictures
+
+```
+
+## Notes
+Author: Markus Fleschutz · License: CC0
+
+## Related Links
+https://github.com/fleschutz/PowerShell
+
+*Generated by convert-ps2md.ps1 using the comment-based help of cd-pics.ps1*