devicetype-library/device-types/Cisco/Meraki-MR56.yaml

---
manufacturer: Cisco
model: MR56
slug: MR56
u_height: 0
is_full_depth: false
comments: "- Datasheet: [https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet](https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet)\r\
  \n- IEEE Standards: 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u"
interfaces:
  - name: main
    type: 2.5gbase-t
    mgmt_only: false
  - name: wlan0
    type: ieee802.11n
  - name: wlan1
    type: ieee802.11ac
Add ZTE, Supermicro vendors with ZXA10 F8x2 GPON MTU series, Cisco Meraki AP MRxx series, Supermicro model SYS-1019P-WTR (#843) * Add ZTE vendor and ZXA10 F8x2 GPON MTU series * Add generic SC-24-double-port Fiber Patch Panel * fix numbers * Add some Cisco-Meraki APs * fix wrong added .pre-commit-config.yaml * Add ZTE ZXA10 C300 * Added SC-24-port_fiber_patch_panel * Add basic zte c300 modules: CICK,PRWH and HUVQ * add ZTE modules * Rename GPON interface * Add Supermicro model SYS-1019P-WTR * Fix typo in com ports type * Add M4300-12X12F * Revert to module * Revision done * Fix little typos * Remove empty comments * Remove empty comments * Fix type * Fix type * Fix rear_port_position * Fix typo * Modify type * Remove USB and VGA * Remove USB and VGA 2022-08-02 21:33:24 +02:00			`---`
			`manufacturer: Cisco`
			`model: MR56`
			`slug: MR56`
			`u_height: 0`
			`is_full_depth: false`
			`comments: "- Datasheet: [https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet](https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet)\r\`
			`\n- IEEE Standards: 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u"`
			`interfaces:`
			`- name: main`
			`type: 2.5gbase-t`
			`mgmt_only: false`
			`- name: wlan0`
			`type: ieee802.11n`
			`- name: wlan1`
			`type: ieee802.11ac`