devicetype-library/device-types/Eaton/CBL2OUT32.yaml

---
manufacturer: Eaton
model: CBL2OUT32
slug: cbl2out32
part_number: CBL2OUT32
u_height: 0
is_full_depth: false
comments: Eaton Rack PDU Output cable 32A, Hardwired 2 x 32A EN60309, plug 0,75M
power-ports:
  - name: Power Port 1
    type: hardwired
power-outlets:
  - name: Outlet 1
    type: iec-60309-p-n-e-6h
    power_port: Power Port 1
  - name: Outlet 2
    type: iec-60309-p-n-e-6h
    power_port: Power Port 1
Eaton PSU, EBM and PDUs (#1035) * Create 9PX5KIRTN.yaml Just created this one. In realety the eth0 should be a module which can be fitted in but this is just right for the most applications i think. * Update 9PX5KIRTN.yaml Made changes nameing power outlets. Also set "power_port" for the outlets. Added Battery connector and detection interfaces. * Create 9PXEBM180.yaml * Create ESWB05.yaml * Create ESWB22.yaml * Changed in-/out-put to hardwired * Create CBL2OUT32.yaml * Update 9PX5KIRTN.yaml Fixes to formatting * Update 9PX5KIRTN.yaml Removed un-needed definitions * Update 9PXEBM180.yaml Removed un-needed definitions Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com> 2023-01-06 18:04:59 +01:00			`---`
			`manufacturer: Eaton`
			`model: CBL2OUT32`
			`slug: cbl2out32`
			`part_number: CBL2OUT32`
			`u_height: 0`
			`is_full_depth: false`
			`comments: Eaton Rack PDU Output cable 32A, Hardwired 2 x 32A EN60309, plug 0,75M`
			`power-ports:`
			`- name: Power Port 1`
			`type: hardwired`
			`power-outlets:`
			`- name: Outlet 1`
			`type: iec-60309-p-n-e-6h`
			`power_port: Power Port 1`
			`- name: Outlet 2`
			`type: iec-60309-p-n-e-6h`
			`power_port: Power Port 1`