Eaton Tripp Lite Updates (#2313)

* Add Tripp-Lite-B064-032-01-IPG

* Update Tripp-Lite-B064-016-02-IPG based on changes made for Tripp-Lite-B064-032-01-IPG.

* Add B072-032-IP2

* Set correct network port names for B064 series.

* Update Tripp-Lite-B064-032-01-IPG.yaml

adjust network port speeds

---------

Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>

device-types/Eaton/Tripp-Lite-B064-016-02-IPG.yaml

@@ -7,12 +7,12 @@ u_height: 1
 is_full_depth: false
 front_image: true
 rear_image: true
-weight: 17
-weight_unit: lb
+weight: 7.5
+weight_unit: kg
 comments: '[Datasheet](https://assets.tripplite.com/product-pdfs/en/b06401602ipg.pdf)'
 console-ports:
   - name: '1'
-    type: de-9
+    type: rj-45
 console-server-ports:
   - name: '1'
     type: rj-45
@@ -46,25 +46,21 @@ console-server-ports:
     type: rj-45
   - name: '16'
     type: rj-45
-  - name: '17'
-    type: usb-a
-  - name: '18'
-    type: usb-a
 power-ports:
   - name: '1'
     type: iec-60320-c14
-    maximum_draw: 30
-    allocated_draw: 15
+    maximum_draw: 95
+    allocated_draw: 50
   - name: '2'
     type: iec-60320-c14
-    maximum_draw: 30
-    allocated_draw: 15
+    maximum_draw: 95
+    allocated_draw: 50
 interfaces:
-  - name: eth0_wan
+  - name: 1000M Network Adapter 1
     label: LAN 1
     type: 100base-tx
     mgmt_only: true
-  - name: eth1_lan
+  - name: 1000M Network Adapter 2
     label: LAN 2
     type: 100base-tx
     mgmt_only: true

device-types/Eaton/Tripp-Lite-B064-032-01-IPG.yaml

@@ -0,0 +1,98 @@
+---
+manufacturer: Eaton
+model: Tripp Lite B064-032-01-IPG
+slug: eaton-tripp-lite-b064-032-01-ipg
+part_number: '037332236340'
+u_height: 1
+is_full_depth: false
+front_image: true
+rear_image: true
+weight: 7.5
+weight_unit: kg
+comments: '[Datasheet](https://assets.tripplite.com/product-pdfs/en/b06403201ipg.pdf)'
+console-ports:
+  - name: '1'
+    type: rj-45
+console-server-ports:
+  - name: '1'
+    type: rj-45
+  - name: '2'
+    type: rj-45
+  - name: '3'
+    type: rj-45
+  - name: '4'
+    type: rj-45
+  - name: '5'
+    type: rj-45
+  - name: '6'
+    type: rj-45
+  - name: '7'
+    type: rj-45
+  - name: '8'
+    type: rj-45
+  - name: '9'
+    type: rj-45
+  - name: '10'
+    type: rj-45
+  - name: '11'
+    type: rj-45
+  - name: '12'
+    type: rj-45
+  - name: '13'
+    type: rj-45
+  - name: '14'
+    type: rj-45
+  - name: '15'
+    type: rj-45
+  - name: '16'
+    type: rj-45
+  - name: '17'
+    type: rj-45
+  - name: '18'
+    type: rj-45
+  - name: '19'
+    type: rj-45
+  - name: '20'
+    type: rj-45
+  - name: '21'
+    type: rj-45
+  - name: '22'
+    type: rj-45
+  - name: '23'
+    type: rj-45
+  - name: '24'
+    type: rj-45
+  - name: '25'
+    type: rj-45
+  - name: '26'
+    type: rj-45
+  - name: '27'
+    type: rj-45
+  - name: '28'
+    type: rj-45
+  - name: '29'
+    type: rj-45
+  - name: '30'
+    type: rj-45
+  - name: '31'
+    type: rj-45
+  - name: '32'
+    type: rj-45
+power-ports:
+  - name: '1'
+    type: iec-60320-c14
+    maximum_draw: 95
+    allocated_draw: 50
+  - name: '2'
+    type: iec-60320-c14
+    maximum_draw: 95
+    allocated_draw: 50
+interfaces:
+  - name: 1000M Network Adapter 1
+    label: LAN 1
+    type: 1000base-t
+    mgmt_only: true
+  - name: 1000M Network Adapter 2
+    label: LAN 2
+    type: 1000base-t
+    mgmt_only: true

device-types/Eaton/Tripp-Lite-B072-032-IP2.yaml

@@ -0,0 +1,102 @@
+---
+manufacturer: Eaton
+model: Tripp Lite B072-032-IP2
+slug: eaton-tripp-lite-b072-032-ip2
+part_number: '037332177261'
+u_height: 1
+is_full_depth: false
+front_image: true
+rear_image: true
+weight: 3.5
+weight_unit: kg
+comments: "[Datasheet](https://assets.tripplite.com/product-pdfs/en/b072032ip2.pdf)\n\nThe KVM features two RJ45 LAN ports for connecting to 10/100 Mbps\
+  \ networks. If LAN 1 goes down, LAN 2 takes over. When LAN 1 becomes operational again, the KVM will need to be rebooted to make it the default LAN port\
+  \ again. Note: Only one LAN port can be turned on at a time; they cannot both be turned on. If you don't wish to use network redundancy, connect a single\
+  \ network cable to LAN 2 Port."
+console-server-ports:
+  - name: '1'
+    type: rj-45
+  - name: '2'
+    type: rj-45
+  - name: '3'
+    type: rj-45
+  - name: '4'
+    type: rj-45
+  - name: '5'
+    type: rj-45
+  - name: '6'
+    type: rj-45
+  - name: '7'
+    type: rj-45
+  - name: '8'
+    type: rj-45
+  - name: '9'
+    type: rj-45
+  - name: '10'
+    type: rj-45
+  - name: '11'
+    type: rj-45
+  - name: '12'
+    type: rj-45
+  - name: '13'
+    type: rj-45
+  - name: '14'
+    type: rj-45
+  - name: '15'
+    type: rj-45
+  - name: '16'
+    type: rj-45
+  - name: '17'
+    type: rj-45
+  - name: '18'
+    type: rj-45
+  - name: '19'
+    type: rj-45
+  - name: '20'
+    type: rj-45
+  - name: '21'
+    type: rj-45
+  - name: '22'
+    type: rj-45
+  - name: '23'
+    type: rj-45
+  - name: '24'
+    type: rj-45
+  - name: '25'
+    type: rj-45
+  - name: '26'
+    type: rj-45
+  - name: '27'
+    type: rj-45
+  - name: '28'
+    type: rj-45
+  - name: '29'
+    type: rj-45
+  - name: '30'
+    type: rj-45
+  - name: '31'
+    type: rj-45
+  - name: '32'
+    type: rj-45
+  - name: Serial Port 1
+    label: SERIAL 1
+    type: rj-45
+  - name: Serial Port 2
+    label: SERIAL 2
+    type: rj-45
+power-ports:
+  - name: '1'
+    type: iec-60320-c14
+    maximum_draw: 65
+    allocated_draw: 50
+  - name: '2'
+    type: iec-60320-c14
+    maximum_draw: 65
+    allocated_draw: 50
+interfaces:
+  - name: LAN 1
+    type: 100base-tx
+    mgmt_only: true
+  - name: LAN 2
+    type: 100base-tx
+    mgmt_only: true