* EX4300-32F only has two QSFP+ ports. Other models have four.
"EX4300-32F 32-port 100/1000BASE-X SFP, 4x10GBASE-X SFP+, 2x40GBASE-X QSFP+, and 350 W AC PS (optics sold separately)"
https://www.juniper.net/us/en/products/switches/ex-series/ex4300-line-of-ethernet-switches-datasheet.html
* Add EM-UM-8X8SFP, 8-port 1GbE/10GbE SFP+ Uplink Module for EX4300-32F and EX4300-32F-DC
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Add Meinberg Lantime M300
* yamllint fixes
* Fixing issues raised by review
* Add weight
* Add max power consumption to PSU
* rename the image to be found
* Update elevation image, removed second psu to corespond with elevation image
* fix yaml to x150-series
* Fix: Prevent non-ASCII characters in YAML files (#2461)
This commit addresses the issue #2461 by updating the test case to detect non-ASCII characters in YAML files. The new check ensures that if any non-ASCII characters are found, the test will fail and provide a clear message listing the problematic characters.
• Added a check to identify non-ASCII characters in the content of the YAML files.
• If non-ASCII characters are found, the test will now fail with a detailed error message, including the list of non-ASCII characters.
This update helps ensure that YAML files are strictly ASCII-encoded, avoiding potential encoding issues in different environments.
* Create X590-24x-1q-2c.yaml
* Create x590-24t-1q-2c.yaml
* Add X590 images
* Rename x590-24t-1q-2c.yaml to X590-24t-1q-2c.yaml
* Merged master after rename so it pulled in the old file too
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Moved the AP yaml files to the correct directory. They should have been in device-types/APC and not the root directory
* Added new device types
* Add files via upload
Added new device types
* Add files via upload
Added new device types
* Rename Cisco SMA M395.yml to cisco-sma-m395.yaml
renamed to slug.yaml
* Rename cisco-sma-m395.yaml to SMA-M395.yaml
Convention in the repo is model.yaml not slug.yaml. See any of the hundreds of other cisco models for reference. I have renamed it to <model>.yml accordingly.
* Updated the mgmt interface type to sfp from sfp28
* Added front and rear images for f5 big ip i7800
* Renamed from dash to period before front and back to match convention.
* Added images for cisco-n9k-c93360yc-fx2
* Rename Cisco SMA M395.yml to SMA-M395.yml
* Delete device-types/Cisco/SMA-M395.yml
deleted the file with the .yml extension since I had renamed it to .yaml
* Rename Cisco WSA S195.yml to WSA-S195.yaml
---------
Co-authored-by: Joseph Ishak <jishak@paciolan.com>
Co-authored-by: Ryan Merolle <ryanmerolle@users.noreply.github.com>
* Added Images for Juniper SRX240H2 and SRX240H2-POE
* Update SRX240H2-POE.yaml
Interface properties and datasheet link were updated, and module bays were added.
* Update SRX240H2.yaml
The datasheet link was updated and module-bays were added.
* Update SRX240H2-POE.yaml
The PDF link, weight, power draw, and interface properties have been updated.
* Update SRX240H2.yaml
Interface properties, PDF link, weight, device pictures, and power draw updated.
* Fix existing switches
* Add the rest of the X440-G2 switches
* Add images for X440-G2 switches
* Fix PoE enum
* Fix image names from 'back' to 'rear'
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Added Dell PowerSwitch N3248P-ON and S4128F-ON
* Added Sophos XGS 126 and 136
* Added Sophos AP6-420E, APX320 and APX530
* Added Fritzbox 7510
* fixed duplicate device type naming
* Removed non-existing LAN Ports
* Moved Power-Ports to seperate module, Add type and mode to POE ports
* Add module-type definition and image for Dell 1150W hot swap psu
* [DELL S4128F-ON] changed power-ports to module-bay and added module-type for psu
* added missing newlines
* remove (r)
* remove (tm)
* replace all dashes with ascii -
* replace double quotes
* Replace another type of dash
* replace multiply by x
* replace a third type of dash
* remaining substitutions by hand
* fix line lenght
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
* Catalyst 3560-CX-12PC-S: Set is_powered
* Catalyst 3560-CX-12PC-S: Add front and rear image
* Fixed issues
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Added Cisco C7009 switch plus supervisor module
* Update N7K-C7009.yaml
Added some extra info
---------
Co-authored-by: fknorn <fknorn@cisco.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
