2. After selecting the file(s), switch the `Local` / `Remote` page. After switching, you will see the `Paste here?` prompt at the bottom of the screen.
3. Enter your ID Server hostname/IP Address in the `ID Server` field. Leave `Relay Server` and `API Server` blank, and enter your public key (optional, required for encryption) in the `Key` field. Press **OK** to save your settings. It will automatically switch to the specified server.
You can also configure it by scanning a QR Code. To generate the QR Code, use the following format (change the `host` and `key` values to your own):
```nolang
config={"host": "xxx", "key": "xxx"}
```
Then go to an [Online QR Code Generator](https://www.qr-code-generator.com/) and paste in the code above.
The picture below is a screenshot of Android. If it is iOS, please check top-right menu on the home page.
| Screen Capture | Whether to enable screen capture sharing permission, the monitoring service will be enabled at the same time as startup |
| Input Control* | Whether to allow the controller to control the input of the mobile phone, such as virtual touch screen operation with the mouse |
| File transfer* | Whether to enable file transfer permission, after startup, you can remotely control the file system of this phone |
| Audio capture | Whether to share the system music inside the phone (not microphone input) |
{{% notice note %}}
Above * represents special permissions. To obtain such permissions, you need to jump to the Android system settings page to obtain them manually. The details are as follows
{{% /notice %}}
#### **Special Permission Request - File**
| Requesting Android file permissions will automatically jump to the system settings page |
After obtaining the `Screen Capture` permission, the service will be automatically started. You can also click the `Start Service` button to start the service. After the service is started, it can accept desktop control requests from other devices.
After the service is started, a unique ID and random password will be automatically obtained for this device. Other devices can control the phone through the ID and password, or manually confirm when a new request is received.
| Before starting the service | After starting the service |
1. Clicking `Start Service` will enable the `Screen Capture` permission by default.
2. When the `Screen Capture` permission is not obtained, other devices cannot issue control requests.
3. Except for the `Screen Capture` permission, the switching of other permissions will only affect the new connection, and will not affect the established connection. If you need to switch permissions for an established connection, please close the current connection first, modify the permissions, and then receive a control request.
