From 4cde1948cf82bbdedca8c6aa94cf9792ed083ced Mon Sep 17 00:00:00 2001 From: 21pages Date: Mon, 12 May 2025 20:07:24 +0800 Subject: [PATCH] update doc Signed-off-by: 21pages --- .../rustdesk-server-pro/faq/_index.de.md | 27 ++--------------- .../rustdesk-server-pro/faq/_index.en.md | 30 ++++--------------- .../rustdesk-server-pro/faq/_index.zh-cn.md | 26 ++-------------- 3 files changed, 11 insertions(+), 72 deletions(-) diff --git a/content/self-host/rustdesk-server-pro/faq/_index.de.md b/content/self-host/rustdesk-server-pro/faq/_index.de.md index f8bf666..99bbb1d 100644 --- a/content/self-host/rustdesk-server-pro/faq/_index.de.md +++ b/content/self-host/rustdesk-server-pro/faq/_index.de.md @@ -294,7 +294,8 @@ Hinweis: Führen Sie `sudo service nginx restart` aus, wenn Sie die `rustdesk.co #### 8. WebSocket Secure (WSS) Unterstützung für den ID-Server und Relay-Server hinzufügen, um sichere Kommunikation für alle Plattformen zu ermöglichen -Fügen Sie die folgende Konfiguration zum ersten `server`-Abschnitt der Datei `/etc/nginx/.../rustdesk.conf` hinzu und starten Sie dann den `Nginx`-Dienst neu. +Fügen Sie die folgende Konfiguration zum ersten `server`-Abschnitt der Datei `/etc/nginx/.../rustdesk.conf` hinzu und starten Sie dann den `Nginx`-Dienst neu. +Der Web-Client kann über `https:///web` aufgerufen werden. Benutzerdefinierte Clients können WebSocket verwenden, indem sie in den erweiterten Optionen `allow-websocket=Y` einstellen. Wenn der benutzerdefinierte Client mit aktiviertem WebSocket verwendet wird, wird er kein TCP/UDP nutzen und kann nur über ein Relais (außer bei direkten IP-Verbindungen) verbunden werden. Wenn nur dieser WebSocket-aktivierte Client verwendet wird, kann der Server die Ports 21114 bis 21119 schließen und nur Port 443 offen halten. ``` location /ws/id { @@ -376,31 +377,9 @@ server { ``` {{% notice note %}} -Wenn Sie zuvor für Web-Clients bereitgestellt haben und es auf allen Plattformen verwenden möchten, müssen Sie `proxy_read_timeout` hinzufügen. Sie können auch die Option `allow-websocket` in Ihrem benutzerdefinierten Client hinzufügen, um WebSocket zu verwenden. +Wenn Sie zuvor für Web-Clients bereitgestellt haben und es auf allen Plattformen verwenden möchten, müssen Sie `proxy_read_timeout` hinzufügen. {{% /notice %}} -#### 9. Melden Sie sich von dem RustDesk öffentlichen Web-Client unter `https://rustdesk.com/web` bei Ihrem Server an. - -Sie müssen Folgendes im `location /`-Abschnitt der Datei `/etc/nginx/.../rustdesk.conf` hinzufügen, um die CORS-Beschränkungen der Browser zu umgehen. - -``` - if ($http_origin ~* (https?://(www\.)?rustdesk\.com)) { - add_header 'Access-Control-Allow-Origin' "$http_origin" always; - add_header 'Access-Control-Allow-Methods' 'GET, POST, PUT, DELETE, PATCH, OPTIONS' always; - add_header 'Access-Control-Allow-Headers' 'Origin, Content-Type, Accept, Authorization' always; - add_header 'Access-Control-Allow-Credentials' 'true' always; - } - if ($request_method = 'OPTIONS') { - add_header 'Access-Control-Allow-Origin' "$http_origin" always; - add_header 'Access-Control-Allow-Methods' 'GET, POST, PUT, DELETE, PATCH, OPTIONS' always; - add_header 'Access-Control-Allow-Headers' 'Origin, Content-Type, Accept, Authorization' always; - add_header 'Access-Control-Allow-Credentials' 'true' always; - add_header 'Content-Length' 0; - add_header 'Content-Type' 'text/plain charset=UTF-8'; - return 204; - } -``` - ### SELinux Wenn bei der Installation die Meldung `Waiting for RustDesk Relay service to become active...` erscheint, kann dies durch SELinux verursacht werden. Sie können die folgenden Befehle ausprobieren: diff --git a/content/self-host/rustdesk-server-pro/faq/_index.en.md b/content/self-host/rustdesk-server-pro/faq/_index.en.md index 7d54310..5da1c77 100644 --- a/content/self-host/rustdesk-server-pro/faq/_index.en.md +++ b/content/self-host/rustdesk-server-pro/faq/_index.en.md @@ -361,7 +361,11 @@ Notice: Run `sudo service nginx restart` if you change the `rustdesk.conf` manua #### 8. Add WebSocket Secure (WSS) support for the id server and relay server to enable secure communication for all platforms. -Add the following configuration to the first `server` section of the `/etc/nginx/.../rustdesk.conf` file, then restart the `Nginx` service. +Add the following configuration to the first `server` section of the `/etc/nginx/.../rustdesk.conf` file, then restart the `Nginx` service. +The web client can be accessed via `https:///web`. Custom clients can use WebSocket by setting `allow-websocket=Y` in the advanced options. If the custom client with WebSocket enabled is used, it will not utilize TCP/UDP and can only connect through a relay (except for direct IP connections). If only this WebSocket-enabled client is used, the server can close ports 21114 to 21119 and only keep port 443 open. + + + ``` location /ws/id { @@ -443,31 +447,9 @@ server { ``` {{% notice note %}} -If you have previously deployed for web clients and want to use it across all platforms, you need to add `proxy_read_timeout`. You can also add the `allow-websocket` option in your custom client to use WebSocket. +If you have previously deployed for web clients and want to use it across all platforms, you need to add `proxy_read_timeout`. {{% /notice %}} -#### 9. Log in to your server from RustDesk public web client at `https://rustdesk.com/web`. - -You need to add below in the `location /` section of the `/etc/nginx/.../rustdesk.conf` to bypass CORS limitation of browsers. - -``` - if ($http_origin ~* (https?://(www\.)?rustdesk\.com)) { - add_header 'Access-Control-Allow-Origin' "$http_origin" always; - add_header 'Access-Control-Allow-Methods' 'GET, POST, PUT, DELETE, PATCH, OPTIONS' always; - add_header 'Access-Control-Allow-Headers' 'Origin, Content-Type, Accept, Authorization' always; - add_header 'Access-Control-Allow-Credentials' 'true' always; - } - if ($request_method = 'OPTIONS') { - add_header 'Access-Control-Allow-Origin' "$http_origin" always; - add_header 'Access-Control-Allow-Methods' 'GET, POST, PUT, DELETE, PATCH, OPTIONS' always; - add_header 'Access-Control-Allow-Headers' 'Origin, Content-Type, Accept, Authorization' always; - add_header 'Access-Control-Allow-Credentials' 'true' always; - add_header 'Content-Length' 0; - add_header 'Content-Type' 'text/plain charset=UTF-8'; - return 204; - } -``` - ### SELinux diff --git a/content/self-host/rustdesk-server-pro/faq/_index.zh-cn.md b/content/self-host/rustdesk-server-pro/faq/_index.zh-cn.md index 94c3103..642dca1 100644 --- a/content/self-host/rustdesk-server-pro/faq/_index.zh-cn.md +++ b/content/self-host/rustdesk-server-pro/faq/_index.zh-cn.md @@ -357,7 +357,7 @@ location / { #### 8. 为 ID 服务器和中继服务器添加 WebSocket Secure (WSS) 支持，以启用所有平台的安全通信 将以下配置添加到 `/etc/nginx/.../rustdesk.conf` 文件的第一个 `server` 部分，然后重启 `Nginx` 服务。 - +Web客户端通过 `https:///web`访问, 自定义客户端通过在高级选项中设置 `allow-websocket=Y`来使用websocket。如果自定义客户端中启用了websocket，该自定义客户端将不会被使用tcp/udp, 只能通过中继连接(除IP直连)。如果只使用这种启用了websocket的客户端, 也可以关闭服务器的21114~21119端口, 只开启443端口。 ``` location /ws/id { proxy_pass http://127.0.0.1:21118; @@ -438,31 +438,9 @@ server { ``` {{% notice note %}} -如果您之前为 Web 客户端部署过，并想在所有平台上使用，您需要添加 `proxy_read_timeout`。您也可以在自定义客户端中添加 `allow-websocket` 选项来使用 WebSocket。 +如果您之前为 Web 客户端部署过，并想在所有平台上使用，您需要添加 `proxy_read_timeout`。 {{% /notice %}} -#### 9. 从 RustDesk 公共 Web 客户端 `https://rustdesk.com/web` 登录到您的服务器 - -您需要在 `/etc/nginx/.../rustdesk.conf` 的 `location /` 部分添加以下内容，以绕过浏览器的 CORS 限制。 - -``` - if ($http_origin ~* (https?://(www\.)?rustdesk\.com)) { - add_header 'Access-Control-Allow-Origin' "$http_origin" always; - add_header 'Access-Control-Allow-Methods' 'GET, POST, PUT, DELETE, PATCH, OPTIONS' always; - add_header 'Access-Control-Allow-Headers' 'Origin, Content-Type, Accept, Authorization' always; - add_header 'Access-Control-Allow-Credentials' 'true' always; - } - if ($request_method = 'OPTIONS') { - add_header 'Access-Control-Allow-Origin' "$http_origin" always; - add_header 'Access-Control-Allow-Methods' 'GET, POST, PUT, DELETE, PATCH, OPTIONS' always; - add_header 'Access-Control-Allow-Headers' 'Origin, Content-Type, Accept, Authorization' always; - add_header 'Access-Control-Allow-Credentials' 'true' always; - add_header 'Content-Length' 0; - add_header 'Content-Type' 'text/plain charset=UTF-8'; - return 204; - } -``` - ### 为什么我的日志/设备名称为空？ 确保在被控制的设备上正确设置了 API，https://github.com/rustdesk/rustdesk-server-pro/issues/21#issuecomment-1637935750。