From ba54b21b1bfdf4ca3f5ff85fe2cafe1f15a523e7 Mon Sep 17 00:00:00 2001 From: RustDesk <71636191+rustdesk@users.noreply.github.com> Date: Sun, 5 May 2024 12:11:51 +0800 Subject: [PATCH] Update _index.en.md --- content/self-host/rustdesk-server-oss/Docker/_index.en.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/content/self-host/rustdesk-server-oss/Docker/_index.en.md b/content/self-host/rustdesk-server-oss/Docker/_index.en.md index 254d184..5854c1f 100644 --- a/content/self-host/rustdesk-server-oss/Docker/_index.en.md +++ b/content/self-host/rustdesk-server-oss/Docker/_index.en.md @@ -8,9 +8,9 @@ weight: 7 #### Requirements You need to have Docker/Podman installed to run a rustdesk-server as a Docker container, if in doubt install Docker with this [guide](https://docs.docker.com/engine/install) to ensure its the most up to date! -By default, `hbbs` listens on 21115 (TCP), 21116 (TCP/UDP) and 21118 (TCP), `hbbr` listens on 21117 (TCP) and 21119 (TCP). Be sure to open these ports in the firewall. **Please note that 21116 should be enabled both for TCP and UDP.** 21115 is used for the NAT type test, 21116/UDP is used for the ID registration and heartbeat service, 21116/TCP is used for TCP hole punching and connection service, 21117 is used for the Relay services, and 21118 and 21119 are used to support web clients. *If you do not need web client (21118, 21119) support, the corresponding ports can be disabled.* +By default, `hbbs` listens on 21114 (TCP, Pro user only), 21115 (TCP), 21116 (TCP/UDP) and 21118 (TCP), `hbbr` listens on 21117 (TCP) and 21119 (TCP). Be sure to open these ports in the firewall. **Please note that 21116 should be enabled both for TCP and UDP.** 21115 is used for the NAT type test, 21116/UDP is used for the ID registration and heartbeat service, 21116/TCP is used for TCP hole punching and connection service, 21117 is used for the Relay services, and 21118 and 21119 are used to support web clients. *If you do not need web client (21118, 21119) support, the corresponding ports can be disabled.* -- TCP (**21115, 21116, 21117, 21118, 21119**) +- TCP (**21114, 21115, 21116, 21117, 21118, 21119**) - UDP (**21116**) #### Docker examples