From f7945e552c0164377bac1d5f9ddbac5de7867554 Mon Sep 17 00:00:00 2001
From: rustdesk <info@rustdesk.com>
Date: Fri, 6 Jun 2025 00:55:10 +0800
Subject: [PATCH] fix

---
 .../rustdesk-server-oss/install/_index.en.md  | 44 ++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/content/self-host/rustdesk-server-oss/install/_index.en.md b/content/self-host/rustdesk-server-oss/install/_index.en.md
index dd07a16..3f4b91b 100644
--- a/content/self-host/rustdesk-server-oss/install/_index.en.md
+++ b/content/self-host/rustdesk-server-oss/install/_index.en.md
@@ -3,5 +3,47 @@ title: Installation
 weight: 1
 ---
 
-[English](/docs/en/self-host/rustdesk-server-oss/install/)
+### Video tutorials
+There are many video tutorials on YouTube, https://github.com/rustdesk/rustdesk/wiki/FAQ#video-tutorials.
 
+### Server Requirements
+The hardware requirements are very low; the minimum configuration of a basic cloud server is enough, and the CPU and memory requirements are minimal. You can also use a Raspberry Pi or something similar. Regarding the network size, if the TCP hole punching direct connection fails, the relay traffic will be consumed. The traffic of a relay connection is between 30 K/s and 3 M/s (1920x1080 screen) depending on the resolution settings and screen update. If it is only for office work demand, the traffic is around 100 K/s.
+
+### Firewall
+If you have UFW installed use the following commands to configure the firewall:
+```
+ufw allow 21114:21119/tcp
+ufw allow 21116/udp
+sudo ufw enable
+```
+
+### Install
+#### Method 1: Docker (Recommended)
+
+```
+bash <(wget -qO- https://get.docker.com)
+wget rustdesk.com/oss.yml -O compose.yml
+sudo docker compose up -d
+```
+
+For more details, please check [Docker](/docs/en/self-host/rustdesk-server-oss/docker/).
+
+#### Method 2: Install your own server as systemd service using a simple to run install script
+Script is hosted on [Techahold](https://github.com/techahold/rustdeskinstall) and supported on our [Discord](https://discord.com/invite/nDceKgxnkV).
+
+Currently the script will download and setup the Relay and Signal Servers (hbbr and hbbs), generate configs and host them on a password protected web page for simple deployment to clients.
+
+Run the following commands:
+```
+wget https://raw.githubusercontent.com/techahold/rustdeskinstall/master/install.sh
+chmod +x install.sh
+./install.sh
+```
+
+There is also an update script on [Techahold's](https://github.com/techahold/rustdeskinstall) repository.
+
+From there, note down the IP/DNS and Key shown at the end of the install and insert those into your client Settings > Network > ID/Relay server `ID server` and `Key` fields, respectively, leaving the other fields blank (see note below).
+
+#### Method 3: Install your own server as systemd service using deb file for debian distros
+
+Please [Download](https://github.com/rustdesk/rustdesk-server/releases/latest) deb files yourself and install with `apt-get -f install <filename>.deb` or `dpkg -i <filename>.deb`.