mirror of
https://github.com/bigbluebutton/docker.git
synced 2024-12-04 22:11:30 +01:00
398 lines
19 KiB
Cheetah
398 lines
19 KiB
Cheetah
<include>
|
|
<X-PRE-PROCESS cmd="set" data="esl_password={{ .Env.ESL_PASSWORD }}"/>
|
|
<!-- Preprocessor Variables
|
|
These are introduced when configuration strings must be consistent across modules.
|
|
NOTICE: YOU CAN NOT COMMENT OUT AN X-PRE-PROCESS line, Remove the line instead.
|
|
WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
|
|
YOU SHOULD CHANGE THIS default_password value if you don't want to be subject to any
|
|
toll fraud in the future. It's your responsibility to secure your own system.
|
|
This default config is used to demonstrate the feature set of FreeSWITCH.
|
|
WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="default_password=1234"/>
|
|
<!-- Did you change it yet? -->
|
|
<!--
|
|
The following variables are set dynamically - calculated if possible by freeswitch - and
|
|
are available to the config as $${variable}. You can see their calculated value via fs_cli
|
|
by entering eval $${variable}
|
|
hostname
|
|
local_ip_v4
|
|
local_mask_v4
|
|
local_ip_v6
|
|
switch_serial
|
|
base_dir
|
|
recordings_dir
|
|
sound_prefix
|
|
sounds_dir
|
|
conf_dir
|
|
log_dir
|
|
run_dir
|
|
db_dir
|
|
mod_dir
|
|
htdocs_dir
|
|
script_dir
|
|
temp_dir
|
|
grammar_dir
|
|
certs_dir
|
|
storage_dir
|
|
cache_dir
|
|
core_uuid
|
|
zrtp_enabled
|
|
nat_public_addr
|
|
nat_private_addr
|
|
nat_type
|
|
-->
|
|
|
|
|
|
<X-PRE-PROCESS cmd="set" data="sound_prefix={{ .Env.SOUNDS_PATH }}"/>
|
|
|
|
<!--
|
|
This setting is what sets the default domain FreeSWITCH will use if all else fails.
|
|
FreeSWICH will default to $${local_ip_v4} unless changed. Changing this setting does
|
|
affect the sip authentication. Please review conf/directory/default.xml for more
|
|
information on this topic.
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="local_ip_v4=10.7.7.1"/>
|
|
<X-PRE-PROCESS cmd="set" data="local_ip_v6=::1"/>
|
|
<X-PRE-PROCESS cmd="set" data="external_ip_v4={{ .Env.EXTERNAL_IPv4 }}"/>
|
|
<X-PRE-PROCESS cmd="set" data="external_ip_v6={{ .Env.EXTERNAL_IPv6 }}"/>
|
|
<X-PRE-PROCESS cmd="set" data="domain={{ .Env.DOMAIN }}"/>
|
|
<X-PRE-PROCESS cmd="set" data="domain_name=$${domain}"/>
|
|
<X-PRE-PROCESS cmd="set" data="hold_music=local_stream://moh"/>
|
|
<X-PRE-PROCESS cmd="set" data="use_profile=external"/>
|
|
<X-PRE-PROCESS cmd="set" data="rtp_sdes_suites=AEAD_AES_256_GCM_8|AEAD_AES_128_GCM_8|AES_CM_256_HMAC_SHA1_80|AES_CM_192_HMAC_SHA1_80|AES_CM_128_HMAC_SHA1_80|AES_CM_256_HMAC_SHA1_32|AES_CM_192_HMAC_SHA1_32|AES_CM_128_HMAC_SHA1_32|AES_CM_128_NULL_AUTH"/>
|
|
<!--
|
|
Enable ZRTP globally you can override this on a per channel basis
|
|
http://wiki.freeswitch.org/wiki/ZRTP (on how to enable zrtp)
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="zrtp_secure_media=true"/>
|
|
<!--
|
|
NOTICE: When using SRTP it's critical that you do not offer or accept
|
|
variable bit rate codecs, doing so would leak information and possibly
|
|
compromise your SRTP stream. (FS-6404)
|
|
Supported SRTP Crypto Suites:
|
|
AEAD_AES_256_GCM_8
|
|
____________________________________________________________________________
|
|
This algorithm is identical to AEAD_AES_256_GCM (see Section 5.2 of
|
|
[RFC5116]), except that the tag length, t, is 8, and an
|
|
authentication tag with a length of 8 octets (64 bits) is used.
|
|
An AEAD_AES_256_GCM_8 ciphertext is exactly 8 octets longer than its
|
|
corresponding plaintext.
|
|
AEAD_AES_128_GCM_8
|
|
____________________________________________________________________________
|
|
This algorithm is identical to AEAD_AES_128_GCM (see Section 5.1 of
|
|
[RFC5116]), except that the tag length, t, is 8, and an
|
|
authentication tag with a length of 8 octets (64 bits) is used.
|
|
An AEAD_AES_128_GCM_8 ciphertext is exactly 8 octets longer than its
|
|
corresponding plaintext.
|
|
AES_CM_256_HMAC_SHA1_80 | AES_CM_192_HMAC_SHA1_80 | AES_CM_128_HMAC_SHA1_80
|
|
____________________________________________________________________________
|
|
AES_CM_128_HMAC_SHA1_80 is the SRTP default AES Counter Mode cipher
|
|
and HMAC-SHA1 message authentication with an 80-bit authentication
|
|
tag. The master-key length is 128 bits and has a default lifetime of
|
|
a maximum of 2^48 SRTP packets or 2^31 SRTCP packets, whichever comes
|
|
first.
|
|
AES_CM_256_HMAC_SHA1_32 | AES_CM_192_HMAC_SHA1_32 | AES_CM_128_HMAC_SHA1_32
|
|
____________________________________________________________________________
|
|
This crypto-suite is identical to AES_CM_128_HMAC_SHA1_80 except that
|
|
the authentication tag is 32 bits. The length of the base64-decoded key and
|
|
salt value for this crypto-suite MUST be 30 octets i.e., 240 bits; otherwise,
|
|
the crypto attribute is considered invalid.
|
|
AES_CM_128_NULL_AUTH
|
|
____________________________________________________________________________
|
|
The SRTP default cipher (AES-128 Counter Mode), but to use no authentication
|
|
method. This policy is NOT RECOMMENDED unless it is unavoidable; see
|
|
Section 7.5 of [RFC3711].
|
|
SRTP variables that modify behaviors based on direction/leg:
|
|
rtp_secure_media
|
|
____________________________________________________________________________
|
|
possible values:
|
|
mandatory - Accept/Offer SAVP negotiation ONLY
|
|
optional - Accept/Offer SAVP/AVP with SAVP preferred
|
|
forbidden - More useful for inbound to deny SAVP negotiation
|
|
false - implies forbidden
|
|
true - implies mandatory
|
|
default if not set is accept SAVP inbound if offered.
|
|
rtp_secure_media_inbound | rtp_secure_media_outbound
|
|
____________________________________________________________________________
|
|
This is the same as rtp_secure_media, but would apply to either inbound
|
|
or outbound offers specifically.
|
|
How to specify crypto suites:
|
|
____________________________________________________________________________
|
|
By default without specifying any crypto suites FreeSWITCH will offer
|
|
crypto suites from strongest to weakest accepting the strongest each
|
|
endpoint has in common. If you wish to force specific crypto suites you
|
|
can do so by appending the suites in a comma separated list in the order
|
|
that you wish to offer them in.
|
|
Examples:
|
|
rtp_secure_media=mandatory:AES_CM_256_HMAC_SHA1_80,AES_CM_256_HMAC_SHA1_32
|
|
rtp_secure_media=true:AES_CM_256_HMAC_SHA1_80,AES_CM_256_HMAC_SHA1_32
|
|
rtp_secure_media=optional:AES_CM_256_HMAC_SHA1_80
|
|
rtp_secure_media=true:AES_CM_256_HMAC_SHA1_80
|
|
Additionally you can narrow this down on either inbound or outbound by
|
|
specifying as so:
|
|
rtp_secure_media_inbound=true:AEAD_AES_256_GCM_8
|
|
rtp_secure_media_inbound=mandatory:AEAD_AES_256_GCM_8
|
|
rtp_secure_media_outbound=true:AEAD_AES_128_GCM_8
|
|
rtp_secure_media_outbound=optional:AEAD_AES_128_GCM_8
|
|
rtp_secure_media_suites
|
|
____________________________________________________________________________
|
|
Optionaly you can use rtp_secure_media_suites to dictate the suite list
|
|
and only use rtp_secure_media=[optional|mandatory|false|true] without having
|
|
to dictate the suite list with the rtp_secure_media* variables.
|
|
-->
|
|
<!--
|
|
Examples of codec options: (module must be compiled and loaded)
|
|
codecname[@8000h|16000h|32000h[@XXi]]
|
|
XX is the frame size must be multples allowed for the codec
|
|
FreeSWITCH can support 10-120ms on some codecs.
|
|
We do not support exceeding the MTU of the RTP packet.
|
|
iLBC@30i - iLBC using mode=30 which will win in all cases.
|
|
DVI4@8000h@20i - IMA ADPCM 8kHz using 20ms ptime. (multiples of 10)
|
|
DVI4@16000h@40i - IMA ADPCM 16kHz using 40ms ptime. (multiples of 10)
|
|
speex@8000h@20i - Speex 8kHz using 20ms ptime.
|
|
speex@16000h@20i - Speex 16kHz using 20ms ptime.
|
|
speex@32000h@20i - Speex 32kHz using 20ms ptime.
|
|
BV16 - BroadVoice 16kb/s narrowband, 8kHz
|
|
BV32 - BroadVoice 32kb/s wideband, 16kHz
|
|
G7221@16000h - G722.1 16kHz (aka Siren 7)
|
|
G7221@32000h - G722.1C 32kHz (aka Siren 14)
|
|
CELT@32000h - CELT 32kHz, only 10ms supported
|
|
CELT@48000h - CELT 48kHz, only 10ms supported
|
|
GSM@40i - GSM 8kHz using 40ms ptime. (GSM is done in multiples of 20, Default is 20ms)
|
|
G722 - G722 16kHz using default 20ms ptime. (multiples of 10)
|
|
PCMU - G711 8kHz ulaw using default 20ms ptime. (multiples of 10)
|
|
PCMA - G711 8kHz alaw using default 20ms ptime. (multiples of 10)
|
|
G726-16 - G726 16kbit adpcm using default 20ms ptime. (multiples of 10)
|
|
G726-24 - G726 24kbit adpcm using default 20ms ptime. (multiples of 10)
|
|
G726-32 - G726 32kbit adpcm using default 20ms ptime. (multiples of 10)
|
|
G726-40 - G726 40kbit adpcm using default 20ms ptime. (multiples of 10)
|
|
AAL2-G726-16 - Same as G726-16 but using AAL2 packing. (multiples of 10)
|
|
AAL2-G726-24 - Same as G726-24 but using AAL2 packing. (multiples of 10)
|
|
AAL2-G726-32 - Same as G726-32 but using AAL2 packing. (multiples of 10)
|
|
AAL2-G726-40 - Same as G726-40 but using AAL2 packing. (multiples of 10)
|
|
LPC - LPC10 using 90ms ptime (only supports 90ms at this time in FreeSWITCH)
|
|
L16 - L16 isn't recommended for VoIP but you can do it. L16 can exceed the MTU rather quickly.
|
|
These are the passthru audio codecs:
|
|
G729 - G729 in passthru mode. (mod_g729)
|
|
G723 - G723.1 in passthru mode. (mod_g723_1)
|
|
AMR - AMR in passthru mode. (mod_amr)
|
|
These are the passthru video codecs: (mod_h26x)
|
|
H261 - H.261 Video
|
|
H263 - H.263 Video
|
|
H263-1998 - H.263-1998 Video
|
|
H263-2000 - H.263-2000 Video
|
|
H264 - H.264 Video
|
|
RTP Dynamic Payload Numbers currently used in FreeSWITCH and what for.
|
|
96 - AMR
|
|
97 - iLBC (30)
|
|
98 - iLBC (20)
|
|
99 - Speex 8kHz, 16kHz, 32kHz
|
|
100 -
|
|
101 - telephone-event
|
|
102 -
|
|
103 -
|
|
104 -
|
|
105 -
|
|
106 - BV16
|
|
107 - G722.1 (16kHz)
|
|
108 -
|
|
109 -
|
|
110 -
|
|
111 -
|
|
112 -
|
|
113 -
|
|
114 - CELT 32kHz, 48kHz
|
|
115 - G722.1C (32kHz)
|
|
116 -
|
|
117 - SILK 8kHz
|
|
118 - SILK 12kHz
|
|
119 - SILK 16kHz
|
|
120 - SILK 24kHz
|
|
121 - AAL2-G726-40 && G726-40
|
|
122 - AAL2-G726-32 && G726-32
|
|
123 - AAL2-G726-24 && G726-24
|
|
124 - AAL2-G726-16 && G726-16
|
|
125 -
|
|
126 -
|
|
127 - BV32
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="global_codec_prefs=OPUS,speex@16000h@20i,speex@8000h@20i,G722,PCMU,PCMA"/>
|
|
<X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=OPUS,speex@16000h@20i,G722,PCMU,PCMA"/>
|
|
|
|
<!--
|
|
xmpp_client_profile and xmpp_server_profile
|
|
xmpp_client_profile can be any string.
|
|
xmpp_server_profile is appended to "dingaling_" to form the database name
|
|
containing the "subscriptions" table.
|
|
used by: dingaling.conf.xml enum.conf.xml
|
|
-->
|
|
|
|
<X-PRE-PROCESS cmd="set" data="xmpp_client_profile=xmppc"/>
|
|
<X-PRE-PROCESS cmd="set" data="xmpp_server_profile=xmpps"/>
|
|
<!--
|
|
THIS IS ONLY USED FOR DINGALING
|
|
bind_server_ip
|
|
Can be an ip address, a dns name, or "auto".
|
|
This determines an ip address available on this host to bind.
|
|
If you are separating RTP and SIP traffic, you will want to have
|
|
use different addresses where this variable appears.
|
|
Used by: dingaling.conf.xml
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/>
|
|
|
|
<!-- NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE
|
|
If you're going to load test FreeSWITCH please input real IP addresses
|
|
for external_rtp_ip and external_sip_ip
|
|
-->
|
|
|
|
<!-- external_rtp_ip
|
|
Can be an one of:
|
|
ip address: "12.34.56.78"
|
|
a stun server lookup: "stun:stun.server.com"
|
|
a DNS name: "host:host.server.com"
|
|
where fs.mydomain.com is a DNS A record-useful when fs is on
|
|
a dynamic IP address, and uses a dynamic DNS updater.
|
|
If unspecified, the bind_server_ip value is used.
|
|
Used by: sofia.conf.xml dingaling.conf.xml
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="external_rtp_ip={{ .Env.EXTERNAL_IPv4 }}"/>
|
|
|
|
<!-- external_sip_ip
|
|
Used as the public IP address for SDP.
|
|
Can be an one of:
|
|
ip address: "12.34.56.78"
|
|
a stun server lookup: "stun:stun.server.com"
|
|
a DNS name: "host:host.server.com"
|
|
where fs.mydomain.com is a DNS A record-useful when fs is on
|
|
a dynamic IP address, and uses a dynamic DNS updater.
|
|
If unspecified, the bind_server_ip value is used.
|
|
Used by: sofia.conf.xml dingaling.conf.xml
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="external_sip_ip={{ .Env.EXTERNAL_IPv4 }}"/>
|
|
|
|
<!-- unroll-loops
|
|
Used to turn on sip loopback unrolling.
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="unroll_loops=true"/>
|
|
|
|
<!-- outbound_caller_id and outbound_caller_name
|
|
The caller ID telephone number we should use when calling out.
|
|
Used by: conference.conf.xml and user directory for default
|
|
outbound callerid name and number.
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="outbound_caller_name=FreeSWITCH"/>
|
|
<X-PRE-PROCESS cmd="set" data="outbound_caller_id=0000000000"/>
|
|
|
|
<!-- various debug and defaults -->
|
|
<X-PRE-PROCESS cmd="set" data="call_debug=false"/>
|
|
<X-PRE-PROCESS cmd="set" data="console_loglevel=info"/>
|
|
<X-PRE-PROCESS cmd="set" data="default_areacode=918"/>
|
|
<X-PRE-PROCESS cmd="set" data="default_country=US"/>
|
|
|
|
<!-- if false or undefined, the destination number is included in presence NOTIFY dm:note.
|
|
if true, the destination number is not included -->
|
|
<X-PRE-PROCESS cmd="set" data="presence_privacy=false"/>
|
|
|
|
<X-PRE-PROCESS cmd="set" data="au-ring=%(400,200,383,417);%(400,2000,383,417)"/>
|
|
<X-PRE-PROCESS cmd="set" data="be-ring=%(1000,3000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="ca-ring=%(2000,4000,440,480)"/>
|
|
<X-PRE-PROCESS cmd="set" data="cn-ring=%(1000,4000,450)"/>
|
|
<X-PRE-PROCESS cmd="set" data="cy-ring=%(1500,3000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="cz-ring=%(1000,4000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="de-ring=%(1000,4000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="dk-ring=%(1000,4000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="dz-ring=%(1500,3500,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="eg-ring=%(2000,1000,475,375)"/>
|
|
<X-PRE-PROCESS cmd="set" data="es-ring=%(1500,3000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="fi-ring=%(1000,4000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="fr-ring=%(1500,3500,440)"/>
|
|
<X-PRE-PROCESS cmd="set" data="hk-ring=%(400,200,440,480);%(400,3000,440,480)"/>
|
|
<X-PRE-PROCESS cmd="set" data="hu-ring=%(1250,3750,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="il-ring=%(1000,3000,400)"/>
|
|
<X-PRE-PROCESS cmd="set" data="in-ring=%(400,200,425,375);%(400,2000,425,375)"/>
|
|
<X-PRE-PROCESS cmd="set" data="jp-ring=%(1000,2000,420,380)"/>
|
|
<X-PRE-PROCESS cmd="set" data="ko-ring=%(1000,2000,440,480)"/>
|
|
<X-PRE-PROCESS cmd="set" data="pk-ring=%(1000,2000,400)"/>
|
|
<X-PRE-PROCESS cmd="set" data="pl-ring=%(1000,4000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="ro-ring=%(1850,4150,475,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="rs-ring=%(1000,4000,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="ru-ring=%(800,3200,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="sa-ring=%(1200,4600,425)"/>
|
|
<X-PRE-PROCESS cmd="set" data="tr-ring=%(2000,4000,450)"/>
|
|
<X-PRE-PROCESS cmd="set" data="uk-ring=%(400,200,400,450);%(400,2000,400,450)"/>
|
|
<X-PRE-PROCESS cmd="set" data="us-ring=%(2000,4000,440,480)"/>
|
|
<X-PRE-PROCESS cmd="set" data="bong-ring=v=-7;%(100,0,941.0,1477.0);v=-7;>=2;+=.1;%(1400,0,350,440)"/>
|
|
<X-PRE-PROCESS cmd="set" data="beep=%(1000,0,640)"/>
|
|
<X-PRE-PROCESS cmd="set" data="sit=%(274,0,913.8);%(274,0,1370.6);%(380,0,1776.7)"/>
|
|
|
|
<!--
|
|
Digits Dialed filter: (FS-6940)
|
|
The digits stream may contain valid credit card numbers or social security numbers, These digit
|
|
filters will allow you to make a valant effort to stamp out sensitive information for
|
|
PCI/HIPPA compliance. (see xml_cdr dialed_digits)
|
|
df_us_ssn = US Social Security Number pattern
|
|
df_us_luhn = Visa, MasterCard, American Express, Diners Club, Discover and JCB
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="df_us_ssn=(?!219099999|078051120)(?!666|000|9\d{2})\d{3}(?!00)\d{2}(?!0{4})\d{4}"/>
|
|
<X-PRE-PROCESS cmd="set" data="df_luhn=?:4[0-9]{12}(?:[0-9]{3})?|5[1-5][0-9]{14}|3[47][0-9]{13}|3(?:0[0-5]|[68][0-9])[0-9]{11}|6(?:011|5[0-9]{2})[0-9]{12}|(?:2131|1800|35\d{3})\d{11}"/>
|
|
<!-- change XX to X below to enable -->
|
|
<XX-PRE-PROCESS cmd="set" data="digits_dialed_filter=(($${df_luhn})|($${df_us_ssn}))"/>
|
|
|
|
<!--
|
|
Setting up your default sip provider is easy.
|
|
Below are some values that should work in most cases.
|
|
These are for conf/directory/default/example.com.xml
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="default_provider=example.com"/>
|
|
<X-PRE-PROCESS cmd="set" data="default_provider_username=joeuser"/>
|
|
<X-PRE-PROCESS cmd="set" data="default_provider_password=password"/>
|
|
<X-PRE-PROCESS cmd="set" data="default_provider_from_domain=example.com"/>
|
|
<!-- true or false -->
|
|
<X-PRE-PROCESS cmd="set" data="default_provider_register=false"/>
|
|
<X-PRE-PROCESS cmd="set" data="default_provider_contact=5000"/>
|
|
|
|
<!--
|
|
SIP and TLS settings. http://wiki.freeswitch.org/wiki/Tls
|
|
valid options: sslv2,sslv3,sslv23,tlsv1,tlsv1.1,tlsv1.2
|
|
default: tlsv1,tlsv1.1,tlsv1.2
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="sip_tls_version=tlsv1,tlsv1.1,tlsv1.2"/>
|
|
|
|
<!--
|
|
TLS cipher suite: default ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
|
|
The actual ciphers supported will change per platform.
|
|
openssl ciphers -v 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'
|
|
Will show you what is available in your verion of openssl.
|
|
-->
|
|
<X-PRE-PROCESS cmd="set" data="sip_tls_ciphers=ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH"/>
|
|
|
|
<!-- Internal SIP Profile -->
|
|
<X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/>
|
|
<X-PRE-PROCESS cmd="set" data="internal_sip_port=5090"/>
|
|
<X-PRE-PROCESS cmd="set" data="internal_tls_port=5061"/>
|
|
<X-PRE-PROCESS cmd="set" data="internal_ssl_enable=false"/>
|
|
|
|
<!-- External SIP Profile -->
|
|
<X-PRE-PROCESS cmd="set" data="external_auth_calls=false"/>
|
|
<X-PRE-PROCESS cmd="set" data="external_sip_port=5060"/>
|
|
<X-PRE-PROCESS cmd="set" data="external_tls_port=5081"/>
|
|
<X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/>
|
|
|
|
<!-- Video Settings -->
|
|
<!-- Setting the max bandwdith -->
|
|
<X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_in=1mb"/>
|
|
<X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_out=1mb"/>
|
|
|
|
<!-- WebRTC Video -->
|
|
<!-- Suppress CNG for WebRTC Audio -->
|
|
<X-PRE-PROCESS cmd="set" data="suppress_cng=true"/>
|
|
<!-- Enable liberal DTMF for those that can't get it right -->
|
|
<X-PRE-PROCESS cmd="set" data="rtp_liberal_dtmf=true"/>
|
|
<!-- Helps with WebRTC Audio -->
|
|
|
|
<!-- Stock Video Avatars -->
|
|
<X-PRE-PROCESS cmd="set" data="video_mute_png=$${images_dir}/default-mute.png"/>
|
|
<X-PRE-PROCESS cmd="set" data="video_no_avatar_png=$${images_dir}/default-avatar.png"/>
|
|
|
|
</include> |