re-order ADS above CAS, as it now also allowed for account storage and translations

setup/lang/egw_ca.lang

@@ -245,7 +245,7 @@ however, the application may still work	setup	ca	Tanmateix, l'aplicació encara
 if no acl records for user or any group the user is a member of	setup	ca	Si no hi han registres ACL ni grup per a l'usuari, aleshores és membre de
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	ca	Si mode_segur està activat, eGW no pot canviar determinades configuracions en temps d'execució ni tampoc podem carregar cap mòdul que no estigui carregat.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	ca	Si l'aplicació no ha definit taules, seleccionant actualitzar hauria de resoldre el problema
-if using ads (active directory) authentication	setup	ca	Si feu servir autentificació ADS (Activer Directory)
+if using ads (active directory)	setup	ca	Si feu servir autentificació ADS (Activer Directory)
 if using ldap	setup	ca	Si feu servir LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	ca	Si utilitzeu LDAP, voleu administrar els atributs del directori personal i l'interpret d'ordres?
 if you did not receive any errors, your applications have been	setup	ca	Si no heu rebut cap error, les aplicacions han estat

setup/lang/egw_cs.lang

@@ -314,7 +314,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	cs
 if no acl records for user or any group the user is a member of	setup	cs	Pokud nejsou ACL záznamy pro uživatele nebo libovolnou skupinu, které je členem
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	cs	Pokud je zapnutý režim safe_mode, eGW nemůže za běhu měnit některá nastavení ani načítat dosud nenačtené moduly
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	cs	Pokud aplikace nemá definovány tabulky, aktualizace by měla problém napravit
-if using ads (active directory) authentication	setup	cs	Při použití ADS (Active Directory) autentikace
+if using ads (active directory)	setup	cs	Při použití ADS (Active Directory) autentikace
 if using cas (central authentication service):	setup	cs	Při použití CAS (Central Authentication Service):
 if using ldap	setup	cs	Při použití LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	cs	Chcete při použití LDAP spravovat atributy pro domovský adresář a loginshell?

setup/lang/egw_de.lang

@@ -14,7 +14,7 @@
 '%1' is no valid domain name!	setup	de	'%1' ist kein gültiger Domainname!
 '%1' is not allowed as %2. arguments of option %3 !!!	setup	de	'%1' ist nicht erlaubt als %2. Parameter für die Option %3 !!!
 '%1' must be integer	setup	de	%1 muß ein Integer-Wert sein.
-(searching accounts and changing passwords)	setup	de	Benutzerkonten suchen und Passwörter ändern)
+(searching accounts and changing passwords)	setup	de	(Benutzerkonten suchen und Passwörter ändern)
 *** do not update your database via setup, as the update might be interrupted by the max_execution_time, which leaves your db in an unrecoverable state (your data is lost) !!!	setup	de	*** Updaten Sie NICHT Ihre Datenbank via Setup, da das Update von der max_execution_time (max. Ausführungszeit für Skripte) unterbrochen werden kann. Ihre Datenbank ist dann in einem nicht mehr wiederherstellbaren Zustand (Ihre Daten sind VERLOREN)!!!
 *** you have to do the changes manualy in your php.ini (usualy in /etc on linux) in order to get egw fully working !!!	setup	de	*** Sie müssen die Änderungen manuell in Ihrer php.ini Datei (üblicherweise in /etc unter Linux) durchführen, um EGroupware vollständig/fehlerfrei ausführen zu können!!!
 00 (disable)	setup	de	00 (abgeschaltet/empfohlen)
@@ -41,6 +41,7 @@ admin first name	setup	de	Admin Vorname
 admin last name	setup	de	Admin Nachname
 admin password	setup	de	Admin Passwort
 admin password to header manager	setup	de	Admin Passwort für Headerverwaltung
+admin user	setup	de	Administrator Konto
 admin user for header manager	setup	de	Admin Benutzer für Headerverwaltung
 admin username	setup	de	Admin Benutzername
 admins	setup	de	Administratoren
@@ -168,6 +169,7 @@ configuration user	setup	de	Konfigurationsbenutzer
 configure now	setup	de	Jetzt konfigurieren
 confirm to delete this backup?	setup	de	Bestätigen Sie diese Datensicherung zu löschen?
 contain	setup	de	enthält
+context to create users	setup	de	Kontext um Benutzer anzulegen
 continue	setup	de	Weiter
 continue to the header admin	setup	de	Weiter zur Headerverwaltung
 convert	setup	de	Konvertieren
@@ -243,9 +245,11 @@ domain-name	setup	de	Domainname
 don't change, if you already stored files! you will loose them!	setup	de	Nicht ändern, wenn Sie bereits Dateien gespeichert haben! Sie werden Sie verlieren!
 dont touch my data	setup	de	Meine Daten nicht verändern
 download	setup	de	Herunterladen
+easiest way under win2008r2 is to add role "active directory certificate services" and reboot.	setup	de	Unter Win2008r2 geht das am einfachsten durch hinzufügen der Rolle "Active Directory-Zertifikatsdienste" und neu starten.
 edit current configuration	setup	de	Gegenwärtige Konfiguration überarbeiten
 edit your existing header.inc.php	setup	de	Bearbeiten Ihrer existierenden header.inc.php
 edit your header.inc.php	setup	de	Bearbeiten Ihrer header.inc.php
+eg. "cn=users,dc=domain,dc=com" for ads domain "domain.com"	setup	de	z.B. "CN=Users,DC=domain,DC=com" für die ADS Domaine "domain.com"
 eg. /egroupware or http://domain.com/egroupware, default: %1	setup	de	zB. /egroupware oder http://domain.com/egroupware, Vorgabe: %1
 egroupware administration manual	setup	de	EGroupware Administrationsmanual (nur in englisch)
 egroupware api needs a database (schema) update from version %1 to %2!	setup	de	EGroupware API benötigt eine Datenbank (Schema) Aktualisierung von Version %1 auf %2!
@@ -296,7 +300,7 @@ filesystem	setup	de	Dateisystem
 filesystem (default)	setup	de	Dateisystem (Vorgabe)
 force selectbox	setup	de	Auswahl erzwingen
 give admin access to all installed apps	setup	de	Admin Zugang zu allen installierten Anwendungen geben
-give ldap root dn and password, if you need to create an instance specific admin user, user- or group-context	setup	de	Tragen Sie das LDAP root DN und Passwort ein, wenn Sie einen Instanzspeziefischen Adminbenutzer oder Gruppen-Kontext benötigen
+give ldap root dn and password, if you need to create an instance specific admin user, user- or group-context	setup	de	Tragen Sie das LDAP root DN und Passwort ein, wenn Sie einen Instanzspezifischen Adminbenutzer oder Gruppen-Kontext benötigen
 gives further options	setup	de	gibt zusätzliche Optionen
 go back	setup	de	Zurück gehen
 go to	setup	de	Gehen zu
@@ -326,7 +330,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	de
 if no acl records for user or any group the user is a member of	setup	de	Wenn es keinen ACL-Eintrag für einen Benutzer oder eine Gruppe, der er angehört gibt
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	de	Wenn safe_mode eingeschaltet ist, kann eGW verschiedene Einstellungen nicht mehr zur Laufzeit ändern, noch können wir nicht geladene Erweiterungen (php extensions) laden.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	de	Wenn die Anwendung keine definierten Tabellen hat, wählen Sie überarbeiten. Das Problem sollte damit behoben werden.
-if using ads (active directory) authentication	setup	de	Wenn Sie ADS (Active Directory) Authentifizierung benutzen
+if using ads (active directory)	setup	de	Wenn Sie ADS (Active Directory) benutzen
 if using cas (central authentication service):	setup	de	Wenn Sie CAS (Central Authentication Service) benutzen
 if using ldap	setup	de	Wenn Sie LDAP verwenden
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	de	Wenn Sie LDAP verwenden, wollen Sie Benutzerverzeichnisse und Kommandointerpreter verwalten ?
@@ -352,6 +356,7 @@ invalid argument '%1' !!!	setup	de	Ungültiges Argument '%1' !!!
 invalid ip address	setup	de	Ungültige IP Adresse
 invalid mcrypt algorithm/mode combination	setup	de	Ungültige MCrypt Algorithmus/Modus Kombination
 invalid password	setup	de	Ungültiges Passwort
+ip or url	setup	de	IP oder URL
 is broken	setup	de	ist kaputt
 is disabled	setup	de	ist nicht aktiv
 is in the webservers docroot	setup	de	ist im Dokumentenverzeichnis (Documentroot) des Webservers
@@ -364,14 +369,15 @@ ldap config	setup	de	LDAP-Konfiguration
 ldap default homedirectory prefix (e.g. /home for /home/username)	setup	de	LDAP-Vorgabewert für Benutzerverzeichnisse (z.B. /home für /home/username)
 ldap default shell (e.g. /bin/bash)	setup	de	LDAP-Vorgabewert für Kommandointerpreter (shell) (z.B. /bin/bash)
 ldap dn="%1" with %2 entries deleted.	setup	de	LDAP dn="%1" mit %2 Einträgen gelöscht.
-ldap encryption type	setup	de	LDAP-Verschlüsselungstyp
+ldap encryption type	setup	de	LDAP Verschlüsselungstyp
-ldap groups context	setup	de	LDAP-Kontext für Gruppe
+ldap groups context	setup	de	LDAP Kontext für Gruppe
-ldap host	setup	de	LDAP-Host
+ldap host	setup	de	LDAP Host
-ldap import	setup	de	LDAP-Import
+ldap import	setup	de	LDAP Import
-ldap root password	setup	de	LDAP-Root-Passwort
+ldap root password	setup	de	LDAP Root Passwort
-ldap rootdn	setup	de	LDAP rootdn
+ldap rootdn	setup	de	LDAP Root DN
 ldap search filter for accounts, default: "(uid=%user)", %domain=egw-domain	setup	de	LDAP Suchfilter für Benutzerkonten, Vorgabe "(uid=%user)", %domain=eGW Domain
 leave empty to keep current.	setup	de	Leer lassen um das existierende Password zu behalten.
+leave empty to use default	setup	de	leer lassen um Standard zu benutzen
 limit access	setup	de	Zugang beschränken
 limit access to setup to the following addresses, networks or hostnames (e.g. 127.0.0.1,10.1.1,myhost.dnydns.org)	setup	de	Zugang zu Setup auf die folgenden IP Adressen, Netzwerke oder Hostnamen beschränken (z.B. 127.0.0.1,10.1.1,myhost.dnydns.org)
 list availible values	setup	de	Listen der verfügbaren Werte
@@ -410,6 +416,7 @@ mount backup directory to %1	setup	de	Datensicherungsverzeichnis unter %1 mounte
 multi-language support setup	setup	de	Mehr-Sprachen Unterstützung einrichten
 name of database	setup	de	Name der Datenbank
 name of db user egroupware uses to connect	setup	de	Name des Datenbank-Benutzers den EGroupware verwendet
+needs extra configuration on dc and webserver!	setup	de	Benötigt extra Konfiguration auf Domain Controller und Webserver!
 never	setup	de	niemals
 new	setup	de	Neu
 next run	setup	de	nächste Ausführung
@@ -439,6 +446,7 @@ one month	setup	de	ein Monat
 one week	setup	de	eine Woche
 only add languages that are not in the database already	setup	de	Nur Sprachen hinzufügen, die noch nicht in der Datenbank sind
 only add new phrases	setup	de	Nur neue Begriffe hinzufügen
+optional, if only authentication and anonymous search is enabled	setup	de	optional, wenn nur Authentifizierung UND anonymes Suchen erlaubt ist
 or	setup	de	oder
 or %1continue to the header admin%2	setup	de	oder %1mit der Headerverwaltung weiter machen%2
 or http://webdav.domain.com (webdav)	setup	de	oder http://webdav.domain.com (für WebDAV)
@@ -495,6 +503,8 @@ rejected lines	setup	de	Zurückgewiesene Zeilen
 remove	setup	de	Entfernen
 remove all	setup	de	Alle Entfernen
 rename	setup	de	Umbenennen
+required to change passwords	setup	de	erforderlich um Passwörter zu ändern
+requires "reset password" privilege, to change passwords!	setup	de	Benötigt "Passwort zurücksetzen" Recht, um Passwörter zu ändern!
 requires reinstall or manual repair	setup	de	Erfordert Neuinstallation oder manuelle Reparatur
 requires upgrade	setup	de	Erfordert Aktualisierung
 resolve	setup	de	Lösen
@@ -647,6 +657,8 @@ use cookies to pass sessionid	setup	de	SitzungsId in einem Cookie speichern
 use mcrypt to crypt session-data: {off(default) | on},[mcrypt-init-vector(default randomly generated)],[mcrypt-version]	setup	de	benutze mcrypt zur Verschlüsselung der Sitzungsdaten: {off(Vorgabe) | on},[mcrypt Initialisierung(Vorgabe ist zufällig erzeugt)],[mcrypt Version]
 use persistent db connections: {on(default) | off}	setup	de	benutze permanente Datenbankverbindung: {on(Vorgabe) | off}
 use pure html compliant code (not fully working yet)	setup	de	Vollständig HTML kompatiblen Code verwenden (nicht vollständig implementiert)
+use space to separate multiple	setup	de	Leerzeichen benutzen um mehrere anzugeben
+use tls or ssl encryption	setup	de	Benutze TLS oder SSL Verschlüsselung
 user	setup	de	Benutzer
 user account prefix	setup	de	Präfix für Benutzernamen
 user for smtp-authentication (leave it empty if no auth required)	setup	de	Benutzer für SMTP-Authentifizierung (leer lassen wenn keine notwendig ist)

setup/lang/egw_en.lang

@@ -41,6 +41,7 @@ admin first name	setup	en	Admin first name
 admin last name	setup	en	Admin last name
 admin password	setup	en	Admin password
 admin password to header manager	setup	en	Admin password to header manager
+admin user	setup	en	Admin user
 admin user for header manager	setup	en	Admin user for header manager
 admin username	setup	en	Admin username
 admins	setup	en	Admins
@@ -168,6 +169,7 @@ configuration user	setup	en	Configuration user
 configure now	setup	en	Configure now
 confirm to delete this backup?	setup	en	Confirm to delete this backup?
 contain	setup	en	Contain
+context to create users	setup	en	Context to create users
 continue	setup	en	Continue
 continue to the header admin	setup	en	Continue to the Header Admin
 convert	setup	en	Convert
@@ -243,9 +245,11 @@ domain-name	setup	en	Domain name
 don't change, if you already stored files! you will loose them!	setup	en	Don't change, if you already stored files! You will loose them!
 dont touch my data	setup	en	Don't touch my data
 download	setup	en	Download
+easiest way under win2008r2 is to add role "active directory certificate services" and reboot.	setup	en	Easiest way under win2008r2 is to add role "Active Directory Certificate Services" and reboot.
 edit current configuration	setup	en	Edit current configuration
 edit your existing header.inc.php	setup	en	Edit your existing header.inc.php
 edit your header.inc.php	setup	en	Edit your header.inc.php
+eg. "cn=users,dc=domain,dc=com" for ads domain "domain.com"	setup	en	eg. "CN=Users,DC=domain,DC=com" for ADS domain "domain.com"
 eg. /egroupware or http://domain.com/egroupware, default: %1	setup	en	eg. /egroupware or http://domain.com/egroupware, default: %1
 egroupware administration manual	setup	en	EGroupware administration manual
 egroupware api needs a database (schema) update from version %1 to %2!	setup	en	EGroupware API needs a database (schema) update from version %1 to %2!
@@ -327,7 +331,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	en
 if no acl records for user or any group the user is a member of	setup	en	If no ACL records for user or any group the user is a member of
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	en	If safe_mode is turned on, eGW is not able to change certain settings on runtime, nor can we load any not yet loaded module.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	en	If the application has no defined tables, selecting upgrade should remedy the problem
-if using ads (active directory) authentication	setup	en	If using ADS (Active Directory) authentication
+if using ads (active directory)	setup	en	If using ADS (Active Directory) authentication
 if using cas (central authentication service):	setup	en	if using cas (Central Authentication Service):
 if using ldap	setup	en	If using LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	en	If using LDAP, do you want to manage home directory and login shell attributes?
@@ -353,6 +357,7 @@ invalid argument '%1' !!!	setup	en	Invalid argument '%1' !
 invalid ip address	setup	en	Invalid IP address!
 invalid mcrypt algorithm/mode combination	setup	en	Invalid Mcrypt Algorithm/Mode combination
 invalid password	setup	en	Invalid password!
+ip or url	setup	en	IP or URL
 is broken	setup	en	is broken
 is disabled	setup	en	is disabled
 is in the webservers docroot	setup	en	is in the web servers docroot
@@ -373,6 +378,7 @@ ldap root password	setup	en	LDAP root password
 ldap rootdn	setup	en	LDAP rootdn
 ldap search filter for accounts, default: "(uid=%user)", %domain=egw-domain	setup	en	LDAP search filter for accounts, default: "(uid=%user)", %domain=eGW-domain
 leave empty to keep current.	setup	en	Leave empty to keep current.
+leave empty to use default	setup	en	leave empty to use default
 limit access	setup	en	Limit access
 limit access to setup to the following addresses, networks or hostnames (e.g. 127.0.0.1,10.1.1,myhost.dnydns.org)	setup	en	Limit access to setup to the following addresses, networks or host names (e.g. 127.0.0.1,10.1.1,myhost.dnydns.org)
 list availible values	setup	en	List available values
@@ -411,6 +417,7 @@ mount backup directory to %1	setup	en	Mount backup directory to %1
 multi-language support setup	setup	en	Multi language support setup
 name of database	setup	en	Name of database
 name of db user egroupware uses to connect	setup	en	Name of db user EGroupware uses to connect
+needs extra configuration on dc and webserver!	setup	en	Needs extra configuration on DC and webserver!
 never	setup	en	Never
 new	setup	en	New
 next run	setup	en	Next run
@@ -440,6 +447,7 @@ one month	setup	en	One month
 one week	setup	en	One week
 only add languages that are not in the database already	setup	en	Only add languages that are not in the database already
 only add new phrases	setup	en	Only add new phrases
+optional, if only authentication and anonymous search is enabled	setup	en	optional, if only authentication AND anonymous search is enabled
 or	setup	en	or
 or %1continue to the header admin%2	setup	en	or %1Continue to the Header Admin%2
 or http://webdav.domain.com (webdav)	setup	en	or http://webdav.domain.com (WebDAV)
@@ -496,6 +504,8 @@ rejected lines	setup	en	Rejected lines
 remove	setup	en	Remove
 remove all	setup	en	Remove all
 rename	setup	en	Rename
+required to change passwords	setup	en	required to change passwords
+requires "reset password" privilege, to change passwords!	setup	en	Requires "Reset Password" privilege, to change passwords!
 requires reinstall or manual repair	setup	en	Requires reinstall or manual repair
 requires upgrade	setup	en	Requires upgrade
 resolve	setup	en	Resolve
@@ -648,6 +658,8 @@ use cookies to pass sessionid	setup	en	Use cookies to pass session ID
 use mcrypt to crypt session-data: {off(default) | on},[mcrypt-init-vector(default randomly generated)],[mcrypt-version]	setup	en	Use mcrypt to crypt session-data: {off(default) | on},[mcrypt-init-vector(default randomly generated)],[mcrypt-version]
 use persistent db connections: {on(default) | off}	setup	en	Use persistent db connections: {on(default) | off}
 use pure html compliant code (not fully working yet)	setup	en	Use pure HTML compliant code
+use space to separate multiple	setup	en	use space to separate multiple
+use tls or ssl encryption	setup	en	Use TLS or SSL encryption
 user	setup	en	User
 user account prefix	setup	en	User account prefix
 user for smtp-authentication (leave it empty if no auth required)	setup	en	User for SMTP-authentication (leave it empty if no auth required)

setup/lang/egw_es-es.lang

@@ -317,7 +317,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	es
 if no acl records for user or any group the user is a member of	setup	es-es	Si no hay registros ACL ni grupo para el usuario, entonces es miembro de
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	es-es	Si está activado safe_mode, eGW no puede cambiar ciertas opciones en modo de ejecución, ni puede cargar ningún módulo que aún no sea cargable.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	es-es	Si la aplicación no ha definido tablas, seleccionando actualizar debería de remediar el problemas
-if using ads (active directory) authentication	setup	es-es	Si se usa identificación del Directorio Activo
+if using ads (active directory)	setup	es-es	Si se usa identificación del Directorio Activo
 if using cas (central authentication service):	setup	es-es	Si se usa CAS (Sistema de identificación centralizado):
 if using ldap	setup	es-es	Si usa LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	es-es	Si usa LDAP ¿desea administrar los atributos del directorio personal y línea de comandos?

setup/lang/egw_et.lang

@@ -110,7 +110,7 @@ grant access	setup	et	Luba Ligipääs
 group	setup	et	grupp
 host information	setup	et	Hosti informatsioon
 hostname/ip of database server	setup	et	Hostinimi/IP või andmebaasi server
-if using ads (active directory) authentication	setup	et	kui kasutad ADS (Active Directory) audentimist
+if using ads (active directory)	setup	et	kui kasutad ADS (Active Directory) audentimist
 if using ldap	setup	et	kui kasutad LDAP
 image type selection order	setup	et	Piltide tüübi sisestamise järjekord
 import has been completed!	setup	et	Importimine on lõpetatud!

setup/lang/egw_fa.lang

@@ -214,7 +214,7 @@ however, the application may still work	setup	fa	کاربرد ممکن از هن
 if no acl records for user or any group the user is a member of	setup	fa	اگر هیچ لیست حق دسترسی برای کاربر یا هیچ گروهی نباشد کابر عضوی خواهد بود از
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	fa	اگر safe_mode روشن باشد، گروه افزار نمی تواند تغییرات را در زمان اجرا اعمال کند و همچنین نمی توانیم پیمانه های بارگذاری نشده را بارگذاری کنیم
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	fa	اگر کاربرد جداول تعریف شده ای نداشته باشد
-if using ads (active directory) authentication	setup	fa	اگر از تصدیق بر اساس ADS(Active Directory) استفاده میکنید
+if using ads (active directory)	setup	fa	اگر از تصدیق بر اساس ADS(Active Directory) استفاده میکنید
 if using ldap	setup	fa	اگر از LDAP استفاده می کنید
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	fa	اگر از LDAP  استفاده می کنید ، آیا می خواهید مشخصات پوشه خانه و پوسته ورود را تنظیم نمائید؟
 if you did not receive any errors, your applications have been	setup	fa	اگر شما هیچ پیام خطائی دریافت نکردید کاربرد شما

setup/lang/egw_fi.lang

@@ -281,7 +281,7 @@ however, the application may still work	setup	fi	Sovellus voi toimia tästä huo
 if no acl records for user or any group the user is a member of	setup	fi	Jos käyttäjällä tai käyttäjän ryhmillä ei ole ACL-tietueita, käyttäjä on tämän ryhmän jäsen:
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	fi	Jos safe_mode on päällä, eGW ei voi muuttaa kaikkia asetuksia ajon aikana, eikä ladata uusia moduuleita.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	fi	Jos sovelluksella ei ole määriteltyjä tauluja, päivittämisen pitäisi korjata ongelma
-if using ads (active directory) authentication	setup	fi	Jos käytetään ADS (Active Directory) -tunnistusta
+if using ads (active directory)	setup	fi	Jos käytetään ADS (Active Directory) -tunnistusta
 if using cas (central authentication service):	setup	fi	Jos käytetään CAS (Central Authentication Service):
 if using ldap	setup	fi	Jos käytetään LDAP-tunnistusta
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	fi	Jos käytät LDAP-tunnistusta, haluatko hallita kotihakemisto- ja shellattribuutteja?

setup/lang/egw_fr.lang

@@ -279,7 +279,7 @@ however, the application may still work	setup	fr	Malgré tout l'application pour
 if no acl records for user or any group the user is a member of	setup	fr	Si aucun enregistrement d'ACL pour un utilisateur ou groupe l'utilisateur est un membre de
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	fr	Si safe_mode est activé, eGroupWare sera incapable de modifier certaines options ou d'activer certains modules.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	fr	Si l'application n'a pas défini de tables, choisir mise à jour devrait résoudre le problème
-if using ads (active directory) authentication	setup	fr	Si vous utilisez l'authentification ADS (Active Directory)
+if using ads (active directory)	setup	fr	Si vous utilisez l'authentification ADS (Active Directory)
 if using cas (central authentication service):	setup	fr	Si vous utilisez l'authentification CAS (Central Authentication Service) :
 if using ldap	setup	fr	Si vous utilisez LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	fr	Si vous utilisez LDAP, voulez-vous gérer les attributs répertoire d'accueil et shell de connexion?

setup/lang/egw_lv.lang

@@ -183,7 +183,7 @@ hostname/ip of database server	setup	lv	Datubāzes zrvera hostvārds/IP
 hour (0-24)	setup	lv	stundas (0-24)
 however, the application may still work	setup	lv	Kaut gan aplikācija joprojām var strādāt
 if no acl records for user or any group the user is a member of	setup	lv	Ja nav ACL ierakstu lietotājam vai kādai grupai, lietotājs pieder
-if using ads (active directory) authentication	setup	lv	Ja lieto ADS (aktīvā direktorija) autentifikāciju
+if using ads (active directory)	setup	lv	Ja lieto ADS (aktīvā direktorija) autentifikāciju
 if using ldap	setup	lv	Ja lieto LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	lv	Ja lieto LDAP, vai vēlies pārvaldīt mājasdirektoriju un pieteikuma ailes atribūtus?
 if you did not receive any errors, your applications have been	setup	lv	Ja nesaņēmi kļūdu paziņojumus, tava aplikācija ir

setup/lang/egw_nl.lang

@@ -296,7 +296,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	nl
 if no acl records for user or any group the user is a member of	setup	nl	Als er ACL records voor de gebruiker of een willekeurige groep zijn is de gebruiker lid van
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	nl	Indien safe_mode ingeschakeld is kan eGW bepaalde instellingen niet tijdens runtime wijzen, bovendien kunnen we geen enkele nog niet geladen module laden.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	nl	Indien de toepassing geen tabellen heeft gedefinieerd is het kiezen voor upgrade de oplossing voor dit problemen
-if using ads (active directory) authentication	setup	nl	Indien ADS (Active Directory) authenticatie gebruikt wordt
+if using ads (active directory)	setup	nl	Indien ADS (Active Directory) authenticatie gebruikt wordt
 if using cas (central authentication service):	setup	nl	indien cas gebruikt wordt (Centrale Authenticatie Service)
 if using ldap	setup	nl	Indien LDAP gebruikt wordt
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	nl	Indien LDAP gebruikt wordt, wilt u dan de homedirectory en loginshell attributen beheren?

setup/lang/egw_no.lang

@@ -199,7 +199,7 @@ however, the application may still work	setup	no	Det kan hende programmet fortsa
 if no acl records for user or any group the user is a member of	setup	no	Om inga åtkomstregler finns för användaren eller de grupper användaren är medlem av
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	no	Om Safe Mode är aktiverat kan inte eGW ändra vissa inställningar medans den kör, eller ladda  en modul som inte redan är laddad.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	no	Om applikationen saknar definerade tabeller bör du välja att uppgradera den.
-if using ads (active directory) authentication	setup	no	Dersom det benyttes ADS (Active Directory) autentisering.
+if using ads (active directory)	setup	no	Dersom det benyttes ADS (Active Directory) autentisering.
 if using ldap	setup	no	Om LDAP används
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	no	Om LDAP används, vill du hantera attribut för hemktalog och programskal?
 if you did not receive any errors, your applications have been	setup	no	Om du inte såg några fel så har dina applikationer blivit

setup/lang/egw_pl.lang

@@ -314,7 +314,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	pl
 if no acl records for user or any group the user is a member of	setup	pl	Jeśli brak uprawnień dostępu (ACL) dla użytkownika lub jakiejkolwiek grupy, której użytkownik jest członkiem
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	pl	Jeśli tryb bezpieczny (safe_mode) jest aktywny, eGW nie może zmieniać różnych ustawień poprzez runtime ani nie można załadować do tej pory niezaładowanych modułów.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	pl	Jeśli aplikacja nie ma zdefiniowanych tabel, wybór aktualizacji rozwiąże problem.
-if using ads (active directory) authentication	setup	pl	Jeśli używana autoryzacja  ADS (Active Directory)
+if using ads (active directory)	setup	pl	Jeśli używana autoryzacja  ADS (Active Directory)
 if using cas (central authentication service):	setup	pl	Jeśli używany CAS (Central Authentication Service):
 if using ldap	setup	pl	Jeśli używany LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	pl	Jeżeli używasz LDAP, czy chciałbyś administrować katalogiem domowym i atrybutami powłoki?

setup/lang/egw_pt-br.lang

@@ -289,7 +289,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	pt
 if no acl records for user or any group the user is a member of	setup	pt-br	Caso não exista registro de permissões ou grupo para o usuário ele é membro do
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	pt-br	Se o modo de segurança estiver ligado, o eGroupware não será capaz de modificar automáticamente determinados valores de configuração, não será possível carregar módulos que ainda não estejam carregados.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	pt-br	Se o aplicativo não têm tabelas definidas, selecionar atualizar deve resolver o problema
-if using ads (active directory) authentication	setup	pt-br	Se estiver usando autenticação por ADS (Active Directory)
+if using ads (active directory)	setup	pt-br	Se estiver usando autenticação por ADS (Active Directory)
 if using ldap	setup	pt-br	Se estiver usando LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	pt-br	Se estiver usando LDAP, você deseja definir atributos de diretório base e  do interpretador de comandos?
 if you did not receive any errors, your applications have been	setup	pt-br	Se não foi exibido nenhum erro, suas aplicações foram

setup/lang/egw_pt.lang

@@ -212,7 +212,7 @@ however, the application may still work	setup	pt	No entanto, a aplicação pode
 if no acl records for user or any group the user is a member of	setup	pt	Se não existirem registos ACL do utilizador ou grupo, o utilizador é um membro de
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	pt	Se o modo de segurança estiver activo, o eGroupWare não pode alterar determinadas configurações em execução, nem pode carregar módulos não carregados.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	pt	Se a aplicação não tiver tabelas definidas, actualizar deve resolver o problema
-if using ads (active directory) authentication	setup	pt	Se estiver a utilizar a autenticação ADS (Directoria Activa)
+if using ads (active directory)	setup	pt	Se estiver a utilizar a autenticação ADS (Directoria Activa)
 if using ldap	setup	pt	Se estiver a utilizar LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	pt	Se estiver a utilizar LDAP, deseja definir atributos da directoria principal e atributos da Shell de acesso ?
 if you did not receive any errors, your applications have been	setup	pt	Se não foi exibido nenhum erro, as suas aplicações foram

setup/lang/egw_ru.lang

@@ -284,7 +284,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	ru
 if no acl records for user or any group the user is a member of	setup	ru	Если нет записей ACL для пользователя или группы, пользователь входит в
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	ru	Если безопасный режим включен, у eGW нет возможностии менять некоторые настройки при запуске так же как и нет возможности запускать любые еще не загруженные модули.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	ru	Если приложение не имеет заранее определенных таблиц, выбор модернизации скорее всего вызовет ряд проблем
-if using ads (active directory) authentication	setup	ru	Используя ADS (Active Directory) идентификацию
+if using ads (active directory)	setup	ru	Используя ADS (Active Directory) идентификацию
 if using ldap	setup	ru	Используя LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	ru	При использовании LDAP,желаете ли вы управлять атрибутами домашних папок  и параметрами входа?
 if you did not receive any errors, your applications have been	setup	ru	Если вы не получили уведомлений об ошибках,ваше приложение успешно

setup/lang/egw_sk.lang

@@ -313,7 +313,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	sk
 if no acl records for user or any group the user is a member of	setup	sk	Ak pre používateľa neexistujú ACL záznamy, používateľom je členom
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	sk	Ak je bezpečný režim zapnutý, eGW nedokáže zmeniť niektoré veci za behu, ani nahrať nejaký nenahratý modul.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	sk	Ak aplikácia nemá tabuľky definícií, voľba "aktualizácia" by mala problém vyriešiť
-if using ads (active directory) authentication	setup	sk	Ak používate ADS (ActiveDirectory) autentifikáciu
+if using ads (active directory)	setup	sk	Ak používate ADS (ActiveDirectory) autentifikáciu
 if using cas (central authentication service):	setup	sk	Ak používate cas (Centrálnu Autentifikačnú Službu):
 if using ldap	setup	sk	Ak používate LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	sk	Ak používate LDAP, chcete spravovať domovský adresár a atribúty login shell?

setup/lang/egw_sl.lang

@@ -295,7 +295,7 @@ http auth types (comma-separated) to use without login-page, eg. "ntlm"	setup	sl
 if no acl records for user or any group the user is a member of	setup	sl	Če ni ACL zapisov za uporabnika ali katerokoli skupino, katere član je
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	sl	Če je vključen način "safe_mode", eGW med delovanjem ne more spremeniti nekaterih nastavitev  niti ne more naložiti novih modulov.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	sl	Če aplikacija nima definiranih tabel, potem bi nadgrajevanje moralo rešiti težave.
-if using ads (active directory) authentication	setup	sl	Če uporabljate ADS (Aktivni Direktorij ) overovljenje
+if using ads (active directory)	setup	sl	Če uporabljate ADS (Aktivni Direktorij ) overovljenje
 if using cas (central authentication service):	setup	sl	Če uporabljate cas (Central Authentication Service):
 if using ldap	setup	sl	Če uporabljate LDAP
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	sl	Če uporabljate LDAP, ali želite upravljati domači direktorij in lastnosti prijavne lupine?

setup/lang/egw_sv.lang

@@ -268,7 +268,7 @@ however, the application may still work	setup	sv	Applikationen kanske ändå fun
 if no acl records for user or any group the user is a member of	setup	sv	Om inga åtkomst regler finns för användaren eller de grupper användaren är medlem av
 if safe_mode is turned on, egw is not able to change certain settings on runtime, nor can we load any not yet loaded module.	setup	sv	Om Safe Mode är aktiverat kan inte eGW ändra vissa inställningar medans den kör, eller ladda  en modul som inte redan är laddad.
 if the application has no defined tables, selecting upgrade should remedy the problem	setup	sv	Om applikationen saknar definerade tabeller bör du välja att uppgradera den.
-if using ads (active directory) authentication	setup	sv	Om AD (Active Directory) autenticering används
+if using ads (active directory)	setup	sv	Om AD (Active Directory) autenticering används
 if using ldap	setup	sv	Om LDAP används
 if using ldap, do you want to manage homedirectory and loginshell attributes?	setup	sv	Om LDAP används, vill du hantera attribut för hemktalog och programskal?
 if you did not receive any errors, your applications have been	setup	sv	Om du inte såg några fel så har dina applikationer blivit

setup/templates/default/config.tpl

@@ -396,7 +396,7 @@
     </td>
    </tr>
 
-   <tr class="row_on">
+   <tr class="row_off">
     <td colspan="2">&nbsp;</td>
    </tr>
 
@@ -405,8 +405,11 @@
    </tr>
 
    <tr class="row_on">
-    <td>{lang_LDAP_host}:</td>
+    <td>
-    <td><input name="newsettings[ldap_host]" value="{value_ldap_host}" /></td>
+    	{lang_LDAP_host} {lang_IP_or_URL}: (ldap|ldaps|tls)://IP[:port]/<br/>
+    	({lang_use_space_to_separate_multiple}):
+    </td>
+    <td><input name="newsettings[ldap_host]" value="{value_ldap_host}" size="40" /></td>
    </tr>
 
    <tr class="row_off">
@@ -479,11 +482,65 @@
     </td>
    </tr>
 
+   <tr class="row_off">
+    <td colspan="2">&nbsp;</td>
+   </tr>
+
+   <tr class="th">
+    <td colspan="2"><b>{lang_If_using_ADS_(Active_Directory)}:</b></td>
+   </tr>
+   <tr class="row_off">
+     <td>{lang_Host/IP_Domain_controler} ({lang_use_space_to_separate_multiple}):</td>
+     <td><input name="newsettings[ads_host]" value="{value_ads_host}" size="40" /></td>
+   </tr>
+   <tr class="row_on">
+     <td>{lang_Domain_name}:</td>
+     <td><input name="newsettings[ads_domain]" value="{value_ads_domain}" size="40" /></td>
+   </tr>
+   <tr class="row_off">
+     <td>
+     	{lang_Admin_user}:<br/>
+     	({lang_optional,_if_only_authentication_AND_anonymous_search_is_enabled})<br/>
+     	{lang_Requires_"Reset_Password"_privilege,_to_change_passwords!}
+     </td>
+     <td><input name="newsettings[ads_admin_user]" value="{value_ads_admin_user}" size="40" /></td>
+   </tr>
+   <tr class="row_on">
+     <td>{lang_Password}:</td>
+     <td><input type="password" name="newsettings[ads_admin_passwd]" value="{value_ads_admin_passwd}" size="40" /></td>
+   </tr>
+   <tr class="row_off">
+     <td>
+     	{lang_Use_TLS_or_SSL_encryption} ({lang_required_to_change_passwords}):<br/>
+     	{lang_Needs_extra_configuration_on_DC_and_webserver!}<br/>
+     	({lang_Easiest_way_under_win2008r2_is_to_add_role_"Active_Directory_Certificate_Services"_and_reboot.})
+     </td>
+     <td>
+     	<select name="newsettings[ads_connection]">
+			<option value="">{lang_No}</option>
+			<option value="tls"{selected_ads_connection_tls}>TLS</option>
+			<option value="ssl"{selected_ads_connection_ssl}>SSL</option>
+     	</select>	
+     </td>
+   </tr>
+   <tr class="row_on">
+     <td>
+     	{lang_Context_to_create_users}:<br/>
+     	{lang_eg._"CN=Users,DC=domain,DC=com"_for_ADS_domain_"domain.com"}<br/>
+     	({lang_leave_empty_to_use_default})
+     </td>
+     <td><input name="newsettings[ads_context]" value="{value_ads_context}" size="80" /></td>
+   </tr>
+
+   <tr class="row_off">
+    <td colspan="2">&nbsp;</td>
+   </tr>
+
    <tr class="th">
     <td colspan="2"><b>{lang_If_using_CAS_(Central_Authentication_Service):}</b></td>
    </tr>
 
-   <tr class="row_off">
+   <tr class="row_on">
     <td>{lang_CAS_server_host_name:<br />Example:_sso-cas.univ-rennes1.fr}</td>
     <td><input name="newsettings[cas_server_host_name]" value="{value_cas_server_host_name}" size="40" /></td>
    </tr>
@@ -493,7 +550,7 @@
     <td><input name="newsettings[cas_server_port]" value="{value_cas_server_port}" size="40" /></td>
    </tr>
 
-   <tr class="row_off">
+   <tr class="row_on">
     <td>{lang_CAS_server_uri:}</td>
     <td><input name="newsettings[cas_server_uri]" value="{value_cas_server_uri}" size="40" /></td>
    </tr>
@@ -508,7 +565,7 @@
     </td>
    </tr>
 
-   <tr class="row_off">
+   <tr class="row_on">
     <td>{lang_SSL_validation:}</td>
     <td>
      <select name="newsettings[cas_ssl_validation]">
@@ -528,48 +585,6 @@
     <td colspan="2">&nbsp;</td>
    </tr>
 
-   <tr class="th">
-    <td colspan="2"><b>{lang_If_using_ADS_(Active_Directory)_authentication}:</b></td>
-   </tr>
-   <tr class="row_off">
-     <td>{lang_Host/IP_Domain_controler}:</td>
-     <td><input name="newsettings[ads_host]" value="{value_ads_host}" size="40" /></td>
-   </tr>
-   <tr class="row_on">
-     <td>{lang_Domain_name}:</td>
-     <td><input name="newsettings[ads_domain]" value="{value_ads_domain}" size="40" /></td>
-   </tr>
-   <tr class="row_off">
-     <td>
-     	{lang_Admin_user}:<br/>
-     	({lang_optional,_if_only_authentication_AND_anonymous_search_is_enabled})<br/>
-     	{lang_Requires_"Reset_Password"_priviledges,_to_change_passwords!}
-     </td>
-     <td><input name="newsettings[ads_admin_user]" value="{value_ads_admin_user}" size="40" /></td>
-   </tr>
-   <tr class="row_on">
-     <td>{lang_Password}:</td>
-     <td><input type="password" name="newsettings[ads_admin_passwd]" value="{value_ads_admin_passwd}" size="40" /></td>
-   </tr>
-   <tr class="row_off">
-     <td>
-     	{lang_use_TLS_or_SSL} {lang_required_to_change_passwords}:<br/>
-     	{lang_Needs_extra_configuration_on_DC_and_webserver!}<br/>
-     	{lang_On_win2008r2_easiest_way_is_to_enable_"Active_Directory_Certivicate_Services"_and_reboot.}
-     </td>
-     <td>
-     	<select name="newsettings[ads_connection]">
-			<option value="">{lang_No}</option>
-			<option value="tls"{selected_ads_connection_tls}>TLS</option>
-			<option value="ssl"{selected_ads_connection_ssl}>SSL</option>
-     	</select>	
-     </td>
-   </tr>
-   <tr class="row_on">
-     <td>{lang_Context_to_create_users}:<br/>{lang_eg._"CN=Users,DC=domain,DC=com"_for_ADS_domain_"domain.com"}</td>
-     <td><input name="newsettings[ads_context]" value="{value_ads_context}" size="80" /></td>
-   </tr>
-
    <tr class="row_off">
     <td colspan="2">&nbsp;</td>
    </tr>