From c082b857cb1519c2e5b5e1190fadae84344acdb9 Mon Sep 17 00:00:00 2001 From: pobv Date: Sat, 5 Aug 2017 10:28:04 +0200 Subject: [PATCH 01/19] Update de.po typo --- po/de.po | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/po/de.po b/po/de.po index 46b0cfe..701de85 100644 --- a/po/de.po +++ b/po/de.po @@ -436,7 +436,7 @@ msgid "" "\n" msgstr "" "Nun wird ein Kennwort für das Dateisystem benötigt.\n" -"Da es keinen Mechanismus zur Wiederhestellung gibt, müssen Sie\n" +"Da es keinen Mechanismus zur Wiederherstellung gibt, müssen Sie\n" "sich an das Kennwort erinnern! Das Kennwort kann mit encfsctl\n" "nächträglich geändert werden.\n" "\n" From d3d329fb431daadf2b90cdb6a75ff64c515580fa Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 09:16:52 -0700 Subject: [PATCH 02/19] add gtest build --- CMakeLists.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/CMakeLists.txt b/CMakeLists.txt index 30fa9a5..ffac343 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -173,6 +173,13 @@ include_directories(${CMAKE_CURRENT_LIST_DIR}/${EASYLOGGING_DIR}/src) link_directories(${CMAKE_BINARY_DIR}/${EASYLOGGING_DIR}) set(EASYLOGGING_LIBRARIES easyloggingpp) +# TODO: add behind TEST flag. +message("-- Including vendored googletest") +set(GOOGLETEST_DIR vendor/github.com/google/googletest) +add_subdirectory(${GOOGLETEST_DIR}) +link_directories(${CMAKE_BINARY_DIR}/${GOOGLETEST_DIR}/googletest) +set(GOOGLETEST_LIBRARIES gtest) + set(SOURCE_FILES encfs/autosprintf.cpp encfs/base64.cpp From 36a4f9c4dd2b91e3e77cd0454c3d61c8227f6898 Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 09:40:44 -0700 Subject: [PATCH 03/19] add initial unit test --- CMakeLists.txt | 29 ++++++++++++++++++++--------- encfs/MemoryPool_test.cpp | 12 ++++++++++++ 2 files changed, 32 insertions(+), 9 deletions(-) create mode 100644 encfs/MemoryPool_test.cpp diff --git a/CMakeLists.txt b/CMakeLists.txt index ffac343..0ef473a 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -18,6 +18,7 @@ option(IWYU "Build with IWYU analysis." OFF) set (CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_CURRENT_LIST_DIR}/cmake") +option (BUILD_UNIT_TESTS "build EncFS unit tests" ON) option (BUILD_SHARED_LIBS "build shared libraries" OFF) option (USE_INTERNAL_TINYXML "use built-in TinyXML2" ON) option (ENABLE_NLS "compile with Native Language Support (using gettext)" ON) @@ -173,13 +174,6 @@ include_directories(${CMAKE_CURRENT_LIST_DIR}/${EASYLOGGING_DIR}/src) link_directories(${CMAKE_BINARY_DIR}/${EASYLOGGING_DIR}) set(EASYLOGGING_LIBRARIES easyloggingpp) -# TODO: add behind TEST flag. -message("-- Including vendored googletest") -set(GOOGLETEST_DIR vendor/github.com/google/googletest) -add_subdirectory(${GOOGLETEST_DIR}) -link_directories(${CMAKE_BINARY_DIR}/${GOOGLETEST_DIR}/googletest) -set(GOOGLETEST_LIBRARIES gtest) - set(SOURCE_FILES encfs/autosprintf.cpp encfs/base64.cpp @@ -236,7 +230,6 @@ if (IWYU) endif() endif() - # Set RPATH to library install path. set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${LIB_INSTALL_DIR}") @@ -284,5 +277,23 @@ if (POD2MAN) DESTINATION ${MAN_DESTINATION}) endif (POD2MAN) -add_custom_target(tests COMMAND ${CMAKE_CURRENT_LIST_DIR}/test.sh) +if (BUILD_UNIT_TESTS) + message("-- Including vendored googletest") + set(GOOGLETEST_DIR vendor/github.com/google/googletest) + add_subdirectory(${GOOGLETEST_DIR}) + link_directories(${CMAKE_BINARY_DIR}/${GOOGLETEST_DIR}/googletest) + message("-- Including vendored benchmark library") + set(GOOGLEBENCH_DIR vendor/github.com/google/benchmark) + set(BENCHMARK_ENABLE_TESTING OFF CACHE BOOL "benchmark tests") + add_subdirectory(${GOOGLEBENCH_DIR}) + link_directories(${CMAKE_BINARY_DIR}/${GOOGLEBENCH_DIR}) + set(GOOGLEBENCH_LIBRARIES benchmark) + + file(GLOB_RECURSE TEST_SOURCES "encfs/*_test.cpp") + + add_executable (unittests ${TEST_SOURCES}) + target_link_libraries(unittests gtest gtest_main encfs) +endif () + +add_custom_target(tests COMMAND ${CMAKE_CURRENT_LIST_DIR}/test.sh) diff --git a/encfs/MemoryPool_test.cpp b/encfs/MemoryPool_test.cpp new file mode 100644 index 0000000..bae4061 --- /dev/null +++ b/encfs/MemoryPool_test.cpp @@ -0,0 +1,12 @@ +#include "gtest/gtest.h" + +#include "MemoryPool.h" + +using namespace encfs; + +TEST(MemoryPool, Allocate) { + auto block = MemoryPool::allocate(1024); + ASSERT_TRUE(block.data != nullptr); + ASSERT_TRUE(block.internalData != nullptr); + MemoryPool::release(block); +} \ No newline at end of file From aa533186e313c9d7f4f63464130409a215eac2bb Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 09:47:33 -0700 Subject: [PATCH 04/19] add first micro benchmark --- CMakeLists.txt | 6 ++++-- encfs/MemoryPool_bench.cpp | 14 ++++++++++++++ encfs/main_bench.cpp | 3 +++ 3 files changed, 21 insertions(+), 2 deletions(-) create mode 100644 encfs/MemoryPool_bench.cpp create mode 100644 encfs/main_bench.cpp diff --git a/CMakeLists.txt b/CMakeLists.txt index 0ef473a..1fe770f 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -288,12 +288,14 @@ if (BUILD_UNIT_TESTS) set(BENCHMARK_ENABLE_TESTING OFF CACHE BOOL "benchmark tests") add_subdirectory(${GOOGLEBENCH_DIR}) link_directories(${CMAKE_BINARY_DIR}/${GOOGLEBENCH_DIR}) - set(GOOGLEBENCH_LIBRARIES benchmark) file(GLOB_RECURSE TEST_SOURCES "encfs/*_test.cpp") - add_executable (unittests ${TEST_SOURCES}) target_link_libraries(unittests gtest gtest_main encfs) + + file(GLOB_RECURSE BENCH_SOURCES "encfs/*_bench.cpp") + add_executable (benchmarks ${BENCH_SOURCES}) + target_link_libraries(benchmarks benchmark encfs) endif () add_custom_target(tests COMMAND ${CMAKE_CURRENT_LIST_DIR}/test.sh) diff --git a/encfs/MemoryPool_bench.cpp b/encfs/MemoryPool_bench.cpp new file mode 100644 index 0000000..9326e43 --- /dev/null +++ b/encfs/MemoryPool_bench.cpp @@ -0,0 +1,14 @@ +#include "benchmark/benchmark.h" + +#include "MemoryPool.h" + +using namespace encfs; + +static void BM_MemPoolAllocate(benchmark::State& state) { + while (state.KeepRunning()) { + auto block = MemoryPool::allocate(1024); + MemoryPool::release(block); + } +} +// Register the function as a benchmark +BENCHMARK(BM_MemPoolAllocate); diff --git a/encfs/main_bench.cpp b/encfs/main_bench.cpp new file mode 100644 index 0000000..a78145f --- /dev/null +++ b/encfs/main_bench.cpp @@ -0,0 +1,3 @@ +#include "benchmark/benchmark.h" + +BENCHMARK_MAIN(); \ No newline at end of file From e329d3fef918bba72f545d8e2f2d09bb44dacbe4 Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 17:48:02 -0700 Subject: [PATCH 05/19] cleanup: uniform context handling --- encfs/encfs.cpp | 47 +++++++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 20 deletions(-) diff --git a/encfs/encfs.cpp b/encfs/encfs.cpp index c8b72d6..b70083a 100644 --- a/encfs/encfs.cpp +++ b/encfs/encfs.cpp @@ -75,13 +75,7 @@ static EncFS_Context *context() { * Optionally takes a pointer to the EncFS_Context, will get it from FUSE * if the argument is NULL. */ -static bool isReadOnly(EncFS_Context *ctx) { - if (ctx == nullptr) { - ctx = (EncFS_Context *)fuse_get_context()->private_data; - } - - return ctx->opts->readOnly; -} +static bool isReadOnly(EncFS_Context *ctx) { return ctx->opts->readOnly; } // helper function -- apply a functor to a cipher path, given the plain path static int withCipherPath(const char *opName, const char *path, @@ -366,7 +360,6 @@ int encfs_mkdir(const char *path, mode_t mode) { int encfs_unlink(const char *path) { EncFS_Context *ctx = context(); - if (isReadOnly(ctx)) { return -EROFS; } @@ -392,7 +385,8 @@ int _do_rmdir(EncFS_Context *, const string &cipherPath) { } int encfs_rmdir(const char *path) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withCipherPath("rmdir", path, bind(_do_rmdir, _1, _2)); @@ -533,7 +527,8 @@ int _do_chmod(EncFS_Context *, const string &cipherPath, mode_t mode) { } int encfs_chmod(const char *path, mode_t mode) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withCipherPath("chmod", path, bind(_do_chmod, _1, _2, mode)); @@ -545,7 +540,8 @@ int _do_chown(EncFS_Context *, const string &cyName, uid_t u, gid_t g) { } int encfs_chown(const char *path, uid_t uid, gid_t gid) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withCipherPath("chown", path, bind(_do_chown, _1, _2, uid, gid)); @@ -554,14 +550,16 @@ int encfs_chown(const char *path, uid_t uid, gid_t gid) { int _do_truncate(FileNode *fnode, off_t size) { return fnode->truncate(size); } int encfs_truncate(const char *path, off_t size) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withFileNode("truncate", path, nullptr, bind(_do_truncate, _1, size)); } int encfs_ftruncate(const char *path, off_t size, struct fuse_file_info *fi) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withFileNode("ftruncate", path, fi, bind(_do_truncate, _1, size)); @@ -573,7 +571,8 @@ int _do_utime(EncFS_Context *, const string &cyName, struct utimbuf *buf) { } int encfs_utime(const char *path, struct utimbuf *buf) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withCipherPath("utime", path, bind(_do_utime, _1, _2, buf)); @@ -596,7 +595,8 @@ int _do_utimens(EncFS_Context *, const string &cyName, } int encfs_utimens(const char *path, const struct timespec ts[2]) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withCipherPath("utimens", path, bind(_do_utimens, _1, _2, ts)); @@ -705,7 +705,8 @@ int _do_fsync(FileNode *fnode, int dataSync) { } int encfs_fsync(const char *path, int dataSync, struct fuse_file_info *file) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withFileNode("fsync", path, file, bind(_do_fsync, _1, dataSync)); @@ -720,7 +721,8 @@ int _do_write(FileNode *fnode, unsigned char *ptr, size_t size, off_t offset) { int encfs_write(const char *path, const char *buf, size_t size, off_t offset, struct fuse_file_info *file) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withFileNode("write", path, file, @@ -762,7 +764,10 @@ int _do_setxattr(EncFS_Context *, const string &cyName, const char *name, } int encfs_setxattr(const char *path, const char *name, const char *value, size_t size, int flags, uint32_t position) { - if (isReadOnly(NULL)) return -EROFS; + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { + return -EROFS; + } (void)flags; return withCipherPath("setxattr", path, bind(_do_setxattr, _1, _2, name, value, size, position)); @@ -774,7 +779,8 @@ int _do_setxattr(EncFS_Context *, const string &cyName, const char *name, } int encfs_setxattr(const char *path, const char *name, const char *value, size_t size, int flags) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } return withCipherPath("setxattr", path, @@ -834,7 +840,8 @@ int _do_removexattr(EncFS_Context *, const string &cyName, const char *name) { } int encfs_removexattr(const char *path, const char *name) { - if (isReadOnly(nullptr)) { + EncFS_Context *ctx = context(); + if (isReadOnly(ctx)) { return -EROFS; } From 0111725d48246f54cc79d64e22d3a497b08f0118 Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 18:18:13 -0700 Subject: [PATCH 06/19] make cipher tests into unit tests --- encfs/Cipher_test.cpp | 195 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 encfs/Cipher_test.cpp diff --git a/encfs/Cipher_test.cpp b/encfs/Cipher_test.cpp new file mode 100644 index 0000000..00d45b0 --- /dev/null +++ b/encfs/Cipher_test.cpp @@ -0,0 +1,195 @@ +#include "gtest/gtest.h" + +#include "BlockNameIO.h" +#include "Cipher.h" +#include "CipherKey.h" +#include "DirNode.h" +#include "FSConfig.h" +#include "FileUtils.h" +#include "StreamNameIO.h" + +using namespace encfs; +using namespace testing; +using std::string; + +const int FSBlockSize = 256; +const char TEST_ROOTDIR[] = "/foo"; + +static void testNameCoding(DirNode &dirNode) { + // encrypt a name + const char *name[] = { + "1234567", "12345678", "123456789", + "123456789ABCDEF", "123456789ABCDEF0", "123456789ABCDEF01", + "test-name", "test-name2", "test", + "../test", "/foo/bar/blah", "test-name.21", + "test-name.22", "test-name.o", "1.test", + "2.test", "a/b/c/d", "a/c/d/e", + "b/c/d/e", "b/a/c/d", NULL}; + + const char **orig = name; + while (*orig) { + string encName = dirNode.relativeCipherPath(*orig); + + // decrypt name + string decName = dirNode.plainPath(encName.c_str()); + + ASSERT_EQ(decName, *orig); + orig++; + } +} + +class CipherTest : public TestWithParam { + protected: + virtual void SetUp() { + Cipher::CipherAlgorithm alg = GetParam(); + cipher = Cipher::New(alg.name, alg.keyLength.closest(256)); + } + virtual void TearDown() {} + std::shared_ptr cipher; +}; + +TEST_P(CipherTest, SaveRestoreKey) { + auto key = cipher->newRandomKey(); + + auto encodingKey = cipher->newRandomKey(); + int encodedKeySize = cipher->encodedKeySize(); + unsigned char keyBuf[encodedKeySize]; + + cipher->writeKey(key, keyBuf, encodingKey); + auto restored = cipher->readKey(keyBuf, encodingKey); + EXPECT_TRUE(restored); + EXPECT_TRUE(cipher->compareKey(key, restored)); +} + +TEST_P(CipherTest, NameStreamEncoding) { + auto key = cipher->newRandomKey(); + + FSConfigPtr fsCfg = FSConfigPtr(new FSConfig); + fsCfg->cipher = cipher; + fsCfg->key = key; + fsCfg->config.reset(new EncFSConfig); + fsCfg->config->blockSize = FSBlockSize; + fsCfg->opts.reset(new EncFS_Opts); + fsCfg->opts->idleTracking = false; + fsCfg->config->uniqueIV = false; + + fsCfg->nameCoding.reset( + new StreamNameIO(StreamNameIO::CurrentInterface(), cipher, key)); + + { + fsCfg->nameCoding->setChainedNameIV(true); + DirNode dirNode(NULL, TEST_ROOTDIR, fsCfg); + testNameCoding(dirNode); + } + { + fsCfg->nameCoding->setChainedNameIV(false); + DirNode dirNode(NULL, TEST_ROOTDIR, fsCfg); + testNameCoding(dirNode); + } +} + +TEST_P(CipherTest, NameBlockEncoding) { + auto key = cipher->newRandomKey(); + + FSConfigPtr fsCfg = FSConfigPtr(new FSConfig); + fsCfg->cipher = cipher; + fsCfg->key = key; + fsCfg->config.reset(new EncFSConfig); + fsCfg->config->blockSize = FSBlockSize; + fsCfg->opts.reset(new EncFS_Opts); + fsCfg->opts->idleTracking = false; + fsCfg->config->uniqueIV = false; + fsCfg->nameCoding.reset(new BlockNameIO( + BlockNameIO::CurrentInterface(), cipher, key, cipher->cipherBlockSize())); + + { + fsCfg->nameCoding->setChainedNameIV(true); + DirNode dirNode(NULL, TEST_ROOTDIR, fsCfg); + testNameCoding(dirNode); + } + { + fsCfg->nameCoding->setChainedNameIV(false); + DirNode dirNode(NULL, TEST_ROOTDIR, fsCfg); + testNameCoding(dirNode); + } +} + +TEST_P(CipherTest, NameBlockBase32Encoding) { + auto key = cipher->newRandomKey(); + + FSConfigPtr fsCfg = FSConfigPtr(new FSConfig); + fsCfg->cipher = cipher; + fsCfg->key = key; + fsCfg->config.reset(new EncFSConfig); + fsCfg->config->blockSize = FSBlockSize; + fsCfg->opts.reset(new EncFS_Opts); + fsCfg->opts->idleTracking = false; + fsCfg->config->uniqueIV = false; + fsCfg->nameCoding.reset(new BlockNameIO(BlockNameIO::CurrentInterface(), + cipher, key, + cipher->cipherBlockSize(), true)); + + { + fsCfg->nameCoding->setChainedNameIV(true); + DirNode dirNode(NULL, TEST_ROOTDIR, fsCfg); + testNameCoding(dirNode); + } + + { + fsCfg->nameCoding->setChainedNameIV(false); + DirNode dirNode(NULL, TEST_ROOTDIR, fsCfg); + testNameCoding(dirNode); + } +} + +TEST_P(CipherTest, ConfigLoadStore) { + auto key = cipher->newRandomKey(); + CipherKey encodingKey = cipher->newRandomKey(); + int encodedKeySize = cipher->encodedKeySize(); + unsigned char keyBuf[encodedKeySize]; + + cipher->writeKey(key, keyBuf, encodingKey); + + // store in config struct.. + EncFSConfig cfg; + cfg.cipherIface = cipher->interface(); + cfg.keySize = 8 * cipher->keySize(); + cfg.blockSize = FSBlockSize; + cfg.assignKeyData(keyBuf, encodedKeySize); + + // save config + // Creation of a temporary file should be more platform independent. On + // c++17 we could use std::filesystem. + std::string name = "/tmp/encfstestXXXXXX"; + int tmpFd = mkstemp(&name[0]); + EXPECT_GE(tmpFd, 0); + // mkstemp opens the temporary file, but we only need its name -> close it + EXPECT_EQ(close(tmpFd), 0); + { + auto ok = writeV6Config(name.c_str(), &cfg); + EXPECT_TRUE(ok); + } + + // read back in and check everything.. + EncFSConfig cfg2; + { + auto ok = readV6Config(name.c_str(), &cfg2, nullptr); + EXPECT_TRUE(ok); + } + // delete the temporary file where we stored the config + EXPECT_EQ(unlink(name.c_str()), 0); + + // check.. + EXPECT_TRUE(cfg.cipherIface.implements(cfg2.cipherIface)); + EXPECT_EQ(cfg.keySize, cfg2.keySize); + EXPECT_EQ(cfg.blockSize, cfg2.blockSize); + + // try decoding key.. + + CipherKey key2 = cipher->readKey(cfg2.getKeyData(), encodingKey); + EXPECT_TRUE(key2); + EXPECT_TRUE(cipher->compareKey(key, key2)); +} + +INSTANTIATE_TEST_CASE_P(CipherKey, CipherTest, + ValuesIn(Cipher::GetAlgorithmList())); From 24ce1006965fe4ac880e0244be3567ba3b9deacf Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 22:26:58 -0400 Subject: [PATCH 07/19] run unit tests with cmake's test target --- CMakeLists.txt | 3 +++ circle.yml | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/CMakeLists.txt b/CMakeLists.txt index 1fe770f..b349cfa 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -278,6 +278,8 @@ if (POD2MAN) endif (POD2MAN) if (BUILD_UNIT_TESTS) + enable_testing() + message("-- Including vendored googletest") set(GOOGLETEST_DIR vendor/github.com/google/googletest) add_subdirectory(${GOOGLETEST_DIR}) @@ -292,6 +294,7 @@ if (BUILD_UNIT_TESTS) file(GLOB_RECURSE TEST_SOURCES "encfs/*_test.cpp") add_executable (unittests ${TEST_SOURCES}) target_link_libraries(unittests gtest gtest_main encfs) + add_test(unit unittests) file(GLOB_RECURSE BENCH_SOURCES "encfs/*_bench.cpp") add_executable (benchmarks ${BENCH_SOURCES}) diff --git a/circle.yml b/circle.yml index 133221b..04d5f28 100644 --- a/circle.yml +++ b/circle.yml @@ -10,5 +10,5 @@ dependencies: test: override: - bash ./ci/config.sh - - cd build && make && ./checkops && make install + - cd build && make && make test && ./checkops && make install - /tmp/encfs/bin/encfsctl --version From a98123a3a7da598d2191f816fe958cdcbb319391 Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 22:36:13 -0400 Subject: [PATCH 08/19] Squashed 'vendor/github.com/google/benchmark/' content from commit 163ce4af git-subtree-dir: vendor/github.com/google/benchmark git-subtree-split: 163ce4af68fd7d100e7e54ab65abd50971183009 --- .clang-format | 5 + .gitignore | 46 + .travis-libcxx-setup.sh | 28 + .travis.yml | 157 ++++ .ycm_extra_conf.py | 115 +++ AUTHORS | 40 + CMakeLists.txt | 202 +++++ CONTRIBUTING.md | 58 ++ CONTRIBUTORS | 59 ++ LICENSE | 202 +++++ README.md | 726 ++++++++++++++++ appveyor.yml | 56 ++ cmake/AddCXXCompilerFlag.cmake | 64 ++ cmake/CXXFeatureCheck.cmake | 46 + cmake/Config.cmake.in | 1 + cmake/GetGitVersion.cmake | 51 ++ cmake/gnu_posix_regex.cpp | 12 + cmake/posix_regex.cpp | 14 + cmake/std_regex.cpp | 10 + cmake/steady_clock.cpp | 7 + cmake/thread_safety_attributes.cpp | 4 + docs/tools.md | 59 ++ include/benchmark/benchmark.h | 1210 +++++++++++++++++++++++++++ include/benchmark/benchmark_api.h | 27 + include/benchmark/reporter.h | 27 + mingw.py | 320 +++++++ src/CMakeLists.txt | 78 ++ src/arraysize.h | 33 + src/benchmark.cc | 715 ++++++++++++++++ src/benchmark_api_internal.h | 46 + src/benchmark_register.cc | 467 +++++++++++ src/check.h | 79 ++ src/colorprint.cc | 188 +++++ src/colorprint.h | 33 + src/commandlineflags.cc | 218 +++++ src/commandlineflags.h | 79 ++ src/complexity.cc | 324 +++++++ src/complexity.h | 60 ++ src/console_reporter.cc | 180 ++++ src/counter.cc | 68 ++ src/counter.h | 26 + src/csv_reporter.cc | 149 ++++ src/cycleclock.h | 172 ++++ src/internal_macros.h | 57 ++ src/json_reporter.cc | 168 ++++ src/log.h | 73 ++ src/mutex.h | 155 ++++ src/re.h | 140 ++++ src/reporter.cc | 68 ++ src/sleep.cc | 51 ++ src/sleep.h | 15 + src/stat.h | 310 +++++++ src/string_util.cc | 172 ++++ src/string_util.h | 40 + src/sysinfo.cc | 355 ++++++++ src/sysinfo.h | 10 + src/timers.cc | 212 +++++ src/timers.h | 48 ++ test/CMakeLists.txt | 170 ++++ test/basic_test.cc | 99 +++ test/benchmark_test.cc | 240 ++++++ test/complexity_test.cc | 167 ++++ test/cxx03_test.cc | 48 ++ test/diagnostics_test.cc | 64 ++ test/donotoptimize_test.cc | 52 ++ test/filter_test.cc | 104 +++ test/fixture_test.cc | 49 ++ test/map_test.cc | 56 ++ test/multiple_ranges_test.cc | 74 ++ test/options_test.cc | 65 ++ test/output_test.h | 201 +++++ test/output_test_helper.cc | 423 ++++++++++ test/register_benchmark_test.cc | 182 ++++ test/reporter_output_test.cc | 256 ++++++ test/skip_with_error_test.cc | 150 ++++ test/user_counters_tabular_test.cc | 250 ++++++ test/user_counters_test.cc | 217 +++++ tools/compare_bench.py | 68 ++ tools/gbench/Inputs/test1_run1.json | 60 ++ tools/gbench/Inputs/test1_run2.json | 60 ++ tools/gbench/__init__.py | 8 + tools/gbench/report.py | 146 ++++ tools/gbench/util.py | 159 ++++ 83 files changed, 11703 insertions(+) create mode 100644 .clang-format create mode 100644 .gitignore create mode 100644 .travis-libcxx-setup.sh create mode 100644 .travis.yml create mode 100644 .ycm_extra_conf.py create mode 100644 AUTHORS create mode 100644 CMakeLists.txt create mode 100644 CONTRIBUTING.md create mode 100644 CONTRIBUTORS create mode 100644 LICENSE create mode 100644 README.md create mode 100644 appveyor.yml create mode 100644 cmake/AddCXXCompilerFlag.cmake create mode 100644 cmake/CXXFeatureCheck.cmake create mode 100644 cmake/Config.cmake.in create mode 100644 cmake/GetGitVersion.cmake create mode 100644 cmake/gnu_posix_regex.cpp create mode 100644 cmake/posix_regex.cpp create mode 100644 cmake/std_regex.cpp create mode 100644 cmake/steady_clock.cpp create mode 100644 cmake/thread_safety_attributes.cpp create mode 100644 docs/tools.md create mode 100644 include/benchmark/benchmark.h create mode 100644 include/benchmark/benchmark_api.h create mode 100644 include/benchmark/reporter.h create mode 100644 mingw.py create mode 100644 src/CMakeLists.txt create mode 100644 src/arraysize.h create mode 100644 src/benchmark.cc create mode 100644 src/benchmark_api_internal.h create mode 100644 src/benchmark_register.cc create mode 100644 src/check.h create mode 100644 src/colorprint.cc create mode 100644 src/colorprint.h create mode 100644 src/commandlineflags.cc create mode 100644 src/commandlineflags.h create mode 100644 src/complexity.cc create mode 100644 src/complexity.h create mode 100644 src/console_reporter.cc create mode 100644 src/counter.cc create mode 100644 src/counter.h create mode 100644 src/csv_reporter.cc create mode 100644 src/cycleclock.h create mode 100644 src/internal_macros.h create mode 100644 src/json_reporter.cc create mode 100644 src/log.h create mode 100644 src/mutex.h create mode 100644 src/re.h create mode 100644 src/reporter.cc create mode 100644 src/sleep.cc create mode 100644 src/sleep.h create mode 100644 src/stat.h create mode 100644 src/string_util.cc create mode 100644 src/string_util.h create mode 100644 src/sysinfo.cc create mode 100644 src/sysinfo.h create mode 100644 src/timers.cc create mode 100644 src/timers.h create mode 100644 test/CMakeLists.txt create mode 100644 test/basic_test.cc create mode 100644 test/benchmark_test.cc create mode 100644 test/complexity_test.cc create mode 100644 test/cxx03_test.cc create mode 100644 test/diagnostics_test.cc create mode 100644 test/donotoptimize_test.cc create mode 100644 test/filter_test.cc create mode 100644 test/fixture_test.cc create mode 100644 test/map_test.cc create mode 100644 test/multiple_ranges_test.cc create mode 100644 test/options_test.cc create mode 100644 test/output_test.h create mode 100644 test/output_test_helper.cc create mode 100644 test/register_benchmark_test.cc create mode 100644 test/reporter_output_test.cc create mode 100644 test/skip_with_error_test.cc create mode 100644 test/user_counters_tabular_test.cc create mode 100644 test/user_counters_test.cc create mode 100755 tools/compare_bench.py create mode 100644 tools/gbench/Inputs/test1_run1.json create mode 100644 tools/gbench/Inputs/test1_run2.json create mode 100644 tools/gbench/__init__.py create mode 100644 tools/gbench/report.py create mode 100644 tools/gbench/util.py diff --git a/.clang-format b/.clang-format new file mode 100644 index 0000000..4b3f13f --- /dev/null +++ b/.clang-format @@ -0,0 +1,5 @@ +--- +Language: Cpp +BasedOnStyle: Google +... + diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..3c1b4f2 --- /dev/null +++ b/.gitignore @@ -0,0 +1,46 @@ +*.a +*.so +*.so.?* +*.dll +*.exe +*.dylib +*.cmake +!/cmake/*.cmake +*~ +*.pyc +__pycache__ + +# lcov +*.lcov +/lcov + +# cmake files. +/Testing +CMakeCache.txt +CMakeFiles/ +cmake_install.cmake + +# makefiles. +Makefile + +# in-source build. +bin/ +lib/ +/test/*_test + +# exuberant ctags. +tags + +# YouCompleteMe configuration. +.ycm_extra_conf.pyc + +# ninja generated files. +.ninja_deps +.ninja_log +build.ninja +install_manifest.txt +rules.ninja + +# out-of-source build top-level folders. +build/ +_build/ diff --git a/.travis-libcxx-setup.sh b/.travis-libcxx-setup.sh new file mode 100644 index 0000000..a591743 --- /dev/null +++ b/.travis-libcxx-setup.sh @@ -0,0 +1,28 @@ +#!/usr/bin/env bash + +# Install a newer CMake version +curl -sSL https://cmake.org/files/v3.6/cmake-3.6.1-Linux-x86_64.sh -o install-cmake.sh +chmod +x install-cmake.sh +sudo ./install-cmake.sh --prefix=/usr/local --skip-license + +# Checkout LLVM sources +git clone --depth=1 https://github.com/llvm-mirror/llvm.git llvm-source +git clone --depth=1 https://github.com/llvm-mirror/libcxx.git llvm-source/projects/libcxx +git clone --depth=1 https://github.com/llvm-mirror/libcxxabi.git llvm-source/projects/libcxxabi + +# Setup libc++ options +if [ -z "$BUILD_32_BITS" ]; then + export BUILD_32_BITS=OFF && echo disabling 32 bit build +fi + +# Build and install libc++ (Use unstable ABI for better sanitizer coverage) +mkdir llvm-build && cd llvm-build +cmake -DCMAKE_C_COMPILER=${C_COMPILER} -DCMAKE_CXX_COMPILER=${COMPILER} \ + -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCMAKE_INSTALL_PREFIX=/usr \ + -DLIBCXX_ABI_UNSTABLE=ON \ + -DLLVM_USE_SANITIZER=${LIBCXX_SANITIZER} \ + -DLLVM_BUILD_32_BITS=${BUILD_32_BITS} \ + ../llvm-source +make cxx -j2 +sudo make install-cxxabi install-cxx +cd ../ diff --git a/.travis.yml b/.travis.yml new file mode 100644 index 0000000..36df088 --- /dev/null +++ b/.travis.yml @@ -0,0 +1,157 @@ +sudo: required +dist: trusty +language: cpp + +env: + global: + - /usr/local/bin:$PATH + +matrix: + include: + - compiler: gcc + addons: + apt: + packages: + - lcov + env: COMPILER=g++ C_COMPILER=gcc BUILD_TYPE=Coverage + - compiler: gcc + env: COMPILER=g++ C_COMPILER=gcc BUILD_TYPE=Debug + - compiler: gcc + env: COMPILER=g++ C_COMPILER=gcc BUILD_TYPE=Release + - compiler: gcc + addons: + apt: + packages: + - g++-multilib + env: COMPILER=g++ C_COMPILER=gcc BUILD_TYPE=Debug BUILD_32_BITS=ON + - compiler: gcc + addons: + apt: + packages: + - g++-multilib + env: COMPILER=g++ C_COMPILER=gcc BUILD_TYPE=Release BUILD_32_BITS=ON + - compiler: gcc + addons: + apt: + sources: + - ubuntu-toolchain-r-test + packages: + - g++-6 + env: + - COMPILER=g++-6 C_COMPILER=gcc-6 BUILD_TYPE=Debug + - EXTRA_FLAGS="-fno-omit-frame-pointer -g -O2 -fsanitize=undefined,address -fuse-ld=gold" + - compiler: clang + env: COMPILER=clang++ C_COMPILER=clang BUILD_TYPE=Debug + - compiler: clang + env: COMPILER=clang++ C_COMPILER=clang BUILD_TYPE=Release + # Clang w/ libc++ + - compiler: clang + addons: + apt: + packages: + clang-3.8 + env: + - COMPILER=clang++-3.8 C_COMPILER=clang-3.8 BUILD_TYPE=Debug + - LIBCXX_BUILD=1 + - EXTRA_FLAGS="-stdlib=libc++" + - compiler: clang + addons: + apt: + packages: + clang-3.8 + env: + - COMPILER=clang++-3.8 C_COMPILER=clang-3.8 BUILD_TYPE=Release + - LIBCXX_BUILD=1 + - EXTRA_FLAGS="-stdlib=libc++" + # Clang w/ 32bit libc++ + - compiler: clang + addons: + apt: + packages: + - clang-3.8 + - g++-multilib + env: + - COMPILER=clang++-3.8 C_COMPILER=clang-3.8 BUILD_TYPE=Debug + - LIBCXX_BUILD=1 + - BUILD_32_BITS=ON + - EXTRA_FLAGS="-stdlib=libc++ -m32" + # Clang w/ 32bit libc++ + - compiler: clang + addons: + apt: + packages: + - clang-3.8 + - g++-multilib + env: + - COMPILER=clang++-3.8 C_COMPILER=clang-3.8 BUILD_TYPE=Release + - LIBCXX_BUILD=1 + - BUILD_32_BITS=ON + - EXTRA_FLAGS="-stdlib=libc++ -m32" + # Clang w/ libc++, ASAN, UBSAN + - compiler: clang + addons: + apt: + packages: + clang-3.8 + env: + - COMPILER=clang++-3.8 C_COMPILER=clang-3.8 BUILD_TYPE=Debug + - LIBCXX_BUILD=1 LIBCXX_SANITIZER="Undefined;Address" + - EXTRA_FLAGS="-stdlib=libc++ -g -O2 -fno-omit-frame-pointer -fsanitize=undefined,address -fno-sanitize-recover=all" + - UBSAN_OPTIONS=print_stacktrace=1 + # Clang w/ libc++ and MSAN + - compiler: clang + addons: + apt: + packages: + clang-3.8 + env: + - COMPILER=clang++-3.8 C_COMPILER=clang-3.8 BUILD_TYPE=Debug + - LIBCXX_BUILD=1 LIBCXX_SANITIZER=MemoryWithOrigins + - EXTRA_FLAGS="-stdlib=libc++ -g -O2 -fno-omit-frame-pointer -fsanitize=memory -fsanitize-memory-track-origins" + # Clang w/ libc++ and MSAN + - compiler: clang + addons: + apt: + packages: + clang-3.8 + env: + - COMPILER=clang++-3.8 C_COMPILER=clang-3.8 BUILD_TYPE=RelWithDebInfo + - LIBCXX_BUILD=1 LIBCXX_SANITIZER=Thread + - EXTRA_FLAGS="-stdlib=libc++ -g -O2 -fno-omit-frame-pointer -fsanitize=thread -fno-sanitize-recover=all" + + - os: osx + osx_image: xcode8.3 + compiler: clang + env: + - COMPILER=clang++ BUILD_TYPE=Debug + - os: osx + osx_image: xcode8.3 + compiler: clang + env: + - COMPILER=clang++ BUILD_TYPE=Release + +before_script: + - if [ -z "$BUILD_32_BITS" ]; then + export BUILD_32_BITS=OFF && echo disabling 32 bit build; + fi + - if [ -n "${LIBCXX_BUILD}" ]; then + source .travis-libcxx-setup.sh; + fi + - mkdir build && cd build + +install: + - if [ "${BUILD_TYPE}" == "Coverage" -a "${TRAVIS_OS_NAME}" == "linux" ]; then + PATH=~/.local/bin:${PATH}; + pip install --user --upgrade pip; + pip install --user cpp-coveralls; + fi + +script: + - cmake -DCMAKE_C_COMPILER=${C_COMPILER} -DCMAKE_CXX_COMPILER=${COMPILER} -DCMAKE_BUILD_TYPE=${BUILD_TYPE} -DCMAKE_CXX_FLAGS="${EXTRA_FLAGS}" -DBENCHMARK_BUILD_32_BITS=${BUILD_32_BITS} .. + - make + - ctest -C ${BUILD_TYPE} --output-on-failure + +after_success: + - if [ "${BUILD_TYPE}" == "Coverage" -a "${TRAVIS_OS_NAME}" == "linux" ]; then + coveralls --include src --include include --gcov-options '\-lp' --root .. --build-root .; + fi diff --git a/.ycm_extra_conf.py b/.ycm_extra_conf.py new file mode 100644 index 0000000..8619435 --- /dev/null +++ b/.ycm_extra_conf.py @@ -0,0 +1,115 @@ +import os +import ycm_core + +# These are the compilation flags that will be used in case there's no +# compilation database set (by default, one is not set). +# CHANGE THIS LIST OF FLAGS. YES, THIS IS THE DROID YOU HAVE BEEN LOOKING FOR. +flags = [ +'-Wall', +'-Werror', +'-pendantic-errors', +'-std=c++0x', +'-fno-strict-aliasing', +'-O3', +'-DNDEBUG', +# ...and the same thing goes for the magic -x option which specifies the +# language that the files to be compiled are written in. This is mostly +# relevant for c++ headers. +# For a C project, you would set this to 'c' instead of 'c++'. +'-x', 'c++', +'-I', 'include', +'-isystem', '/usr/include', +'-isystem', '/usr/local/include', +] + + +# Set this to the absolute path to the folder (NOT the file!) containing the +# compile_commands.json file to use that instead of 'flags'. See here for +# more details: http://clang.llvm.org/docs/JSONCompilationDatabase.html +# +# Most projects will NOT need to set this to anything; you can just change the +# 'flags' list of compilation flags. Notice that YCM itself uses that approach. +compilation_database_folder = '' + +if os.path.exists( compilation_database_folder ): + database = ycm_core.CompilationDatabase( compilation_database_folder ) +else: + database = None + +SOURCE_EXTENSIONS = [ '.cc' ] + +def DirectoryOfThisScript(): + return os.path.dirname( os.path.abspath( __file__ ) ) + + +def MakeRelativePathsInFlagsAbsolute( flags, working_directory ): + if not working_directory: + return list( flags ) + new_flags = [] + make_next_absolute = False + path_flags = [ '-isystem', '-I', '-iquote', '--sysroot=' ] + for flag in flags: + new_flag = flag + + if make_next_absolute: + make_next_absolute = False + if not flag.startswith( '/' ): + new_flag = os.path.join( working_directory, flag ) + + for path_flag in path_flags: + if flag == path_flag: + make_next_absolute = True + break + + if flag.startswith( path_flag ): + path = flag[ len( path_flag ): ] + new_flag = path_flag + os.path.join( working_directory, path ) + break + + if new_flag: + new_flags.append( new_flag ) + return new_flags + + +def IsHeaderFile( filename ): + extension = os.path.splitext( filename )[ 1 ] + return extension in [ '.h', '.hxx', '.hpp', '.hh' ] + + +def GetCompilationInfoForFile( filename ): + # The compilation_commands.json file generated by CMake does not have entries + # for header files. So we do our best by asking the db for flags for a + # corresponding source file, if any. If one exists, the flags for that file + # should be good enough. + if IsHeaderFile( filename ): + basename = os.path.splitext( filename )[ 0 ] + for extension in SOURCE_EXTENSIONS: + replacement_file = basename + extension + if os.path.exists( replacement_file ): + compilation_info = database.GetCompilationInfoForFile( + replacement_file ) + if compilation_info.compiler_flags_: + return compilation_info + return None + return database.GetCompilationInfoForFile( filename ) + + +def FlagsForFile( filename, **kwargs ): + if database: + # Bear in mind that compilation_info.compiler_flags_ does NOT return a + # python list, but a "list-like" StringVec object + compilation_info = GetCompilationInfoForFile( filename ) + if not compilation_info: + return None + + final_flags = MakeRelativePathsInFlagsAbsolute( + compilation_info.compiler_flags_, + compilation_info.compiler_working_dir_ ) + else: + relative_to = DirectoryOfThisScript() + final_flags = MakeRelativePathsInFlagsAbsolute( flags, relative_to ) + + return { + 'flags': final_flags, + 'do_cache': True + } diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..ae278df --- /dev/null +++ b/AUTHORS @@ -0,0 +1,40 @@ +# This is the official list of benchmark authors for copyright purposes. +# This file is distinct from the CONTRIBUTORS files. +# See the latter for an explanation. +# +# Names should be added to this file as: +# Name or Organization +# The email address is not required for organizations. +# +# Please keep the list sorted. + +Albert Pretorius +Arne Beer +Christopher Seymour +David Coeurjolly +Dominic Hamon +Eric Fiselier +Eugene Zhuk +Evgeny Safronov +Felix Homann +Google Inc. +International Business Machines Corporation +Ismael Jimenez Martinez +Jern-Kuan Leong +Joao Paulo Magalhaes +JianXiong Zhou +Jussi Knuuttila +Kaito Udagawa +Lei Xu +Matt Clarkson +Maxim Vafin +Nick Hutchinson +Oleksandr Sochka +Paul Redmond +Radoslav Yovchev +Shuo Chen +Yixuan Qiu +Yusuke Suzuki +Dirac Research +Zbigniew Skowron +Dominik Czarnota diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 0000000..f7f1566 --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,202 @@ +cmake_minimum_required (VERSION 2.8.12) + +project (benchmark) + +foreach(p + CMP0054 # CMake 3.1 + CMP0056 # export EXE_LINKER_FLAGS to try_run + ) + if(POLICY ${p}) + cmake_policy(SET ${p} NEW) + endif() +endforeach() + +option(BENCHMARK_ENABLE_TESTING "Enable testing of the benchmark library." ON) +option(BENCHMARK_ENABLE_EXCEPTIONS "Enable the use of exceptions in the benchmark library." ON) +option(BENCHMARK_ENABLE_LTO "Enable link time optimisation of the benchmark library." OFF) +option(BENCHMARK_USE_LIBCXX "Build and test using libc++ as the standard library." OFF) +option(BENCHMARK_BUILD_32_BITS "Build a 32 bit version of the library" OFF) + +# Make sure we can import out CMake functions +list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake") + +# Read the git tags to determine the project version +include(GetGitVersion) +get_git_version(GIT_VERSION) + +# Tell the user what versions we are using +string(REGEX MATCH "[0-9]+\\.[0-9]+\\.[0-9]+" VERSION ${GIT_VERSION}) +message("-- Version: ${VERSION}") + +# The version of the libraries +set(GENERIC_LIB_VERSION ${VERSION}) +string(SUBSTRING ${VERSION} 0 1 GENERIC_LIB_SOVERSION) + +# Import our CMake modules +include(CheckCXXCompilerFlag) +include(AddCXXCompilerFlag) +include(CXXFeatureCheck) + +if (BENCHMARK_BUILD_32_BITS) + add_required_cxx_compiler_flag(-m32) +endif() + +if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC") + # Turn compiler warnings up to 11 + string(REGEX REPLACE "[-/]W[1-4]" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") + set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4") + add_definitions(-D_CRT_SECURE_NO_WARNINGS) + + if (NOT BENCHMARK_ENABLE_EXCEPTIONS) + add_cxx_compiler_flag(-EHs-) + add_cxx_compiler_flag(-EHa-) + endif() + # Link time optimisation + if (BENCHMARK_ENABLE_LTO) + set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /GL") + set(CMAKE_STATIC_LINKER_FLAGS_RELEASE "${CMAKE_STATIC_LINKER_FLAGS_RELEASE} /LTCG") + set(CMAKE_SHARED_LINKER_FLAGS_RELEASE "${CMAKE_SHARED_LINKER_FLAGS_RELEASE} /LTCG") + set(CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} /LTCG") + + set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} /GL") + string(REGEX REPLACE "[-/]INCREMENTAL" "/INCREMENTAL:NO" CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO "${CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO}") + set(CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO "${CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO} /LTCG") + string(REGEX REPLACE "[-/]INCREMENTAL" "/INCREMENTAL:NO" CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO "${CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO}") + set(CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO "${CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO} /LTCG") + string(REGEX REPLACE "[-/]INCREMENTAL" "/INCREMENTAL:NO" CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO "${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO}") + set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO "${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO} /LTCG") + + set(CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} /GL") + set(CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL "${CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL} /LTCG") + set(CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL "${CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL} /LTCG") + set(CMAKE_EXE_LINKER_FLAGS_MINSIZEREL "${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL} /LTCG") + endif() +else() + # Try and enable C++11. Don't use C++14 because it doesn't work in some + # configurations. + add_cxx_compiler_flag(-std=c++11) + if (NOT HAVE_CXX_FLAG_STD_CXX11) + add_cxx_compiler_flag(-std=c++0x) + endif() + + # Turn compiler warnings up to 11 + add_cxx_compiler_flag(-Wall) + + add_cxx_compiler_flag(-Wextra) + add_cxx_compiler_flag(-Wshadow) + add_cxx_compiler_flag(-Werror RELEASE) + add_cxx_compiler_flag(-Werror RELWITHDEBINFO) + add_cxx_compiler_flag(-Werror MINSIZEREL) + add_cxx_compiler_flag(-pedantic) + add_cxx_compiler_flag(-pedantic-errors) + add_cxx_compiler_flag(-Wshorten-64-to-32) + add_cxx_compiler_flag(-Wfloat-equal) + add_cxx_compiler_flag(-fstrict-aliasing) + if (NOT BENCHMARK_ENABLE_EXCEPTIONS) + add_cxx_compiler_flag(-fno-exceptions) + endif() + if (NOT BENCHMARK_USE_LIBCXX) + add_cxx_compiler_flag(-Wzero-as-null-pointer-constant) + endif() + if (HAVE_CXX_FLAG_FSTRICT_ALIASING) + if (NOT CMAKE_CXX_COMPILER_ID STREQUAL "Intel") #ICC17u2: Many false positives for Wstrict-aliasing + add_cxx_compiler_flag(-Wstrict-aliasing) + endif() + endif() + # ICC17u2: overloaded virtual function "benchmark::Fixture::SetUp" is only partially overridden + # (because of deprecated overload) + add_cxx_compiler_flag(-wd654) + add_cxx_compiler_flag(-Wthread-safety) + if (HAVE_CXX_FLAG_WTHREAD_SAFETY) + cxx_feature_check(THREAD_SAFETY_ATTRIBUTES) + endif() + + # On most UNIX like platforms g++ and clang++ define _GNU_SOURCE as a + # predefined macro, which turns on all of the wonderful libc extensions. + # However g++ doesn't do this in Cygwin so we have to define it ourselfs + # since we depend on GNU/POSIX/BSD extensions. + if (CYGWIN) + add_definitions(-D_GNU_SOURCE=1) + endif() + + # Link time optimisation + if (BENCHMARK_ENABLE_LTO) + add_cxx_compiler_flag(-flto) + if ("${CMAKE_C_COMPILER_ID}" STREQUAL "GNU") + find_program(GCC_AR gcc-ar) + if (GCC_AR) + set(CMAKE_AR ${GCC_AR}) + endif() + find_program(GCC_RANLIB gcc-ranlib) + if (GCC_RANLIB) + set(CMAKE_RANLIB ${GCC_RANLIB}) + endif() + endif() + endif() + + # Coverage build type + set(CMAKE_CXX_FLAGS_COVERAGE "${CMAKE_CXX_FLAGS_DEBUG}" CACHE STRING + "Flags used by the C++ compiler during coverage builds." + FORCE) + set(CMAKE_EXE_LINKER_FLAGS_COVERAGE + "${CMAKE_EXE_LINKER_FLAGS_DEBUG}" CACHE STRING + "Flags used for linking binaries during coverage builds." + FORCE) + set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE + "${CMAKE_SHARED_LINKER_FLAGS_DEBUG}" CACHE STRING + "Flags used by the shared libraries linker during coverage builds." + FORCE) + mark_as_advanced( + CMAKE_CXX_FLAGS_COVERAGE + CMAKE_EXE_LINKER_FLAGS_COVERAGE + CMAKE_SHARED_LINKER_FLAGS_COVERAGE) + set(CMAKE_BUILD_TYPE "${CMAKE_BUILD_TYPE}" CACHE STRING + "Choose the type of build, options are: None Debug Release RelWithDebInfo MinSizeRel Coverage." + FORCE) + add_cxx_compiler_flag(--coverage COVERAGE) +endif() + +if (BENCHMARK_USE_LIBCXX) + if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang") + add_cxx_compiler_flag(-stdlib=libc++) + elseif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR + "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Intel") + add_cxx_compiler_flag(-nostdinc++) + message("libc++ header path must be manually specified using CMAKE_CXX_FLAGS") + # Adding -nodefaultlibs directly to CMAKE__LINKER_FLAGS will break + # configuration checks such as 'find_package(Threads)' + list(APPEND BENCHMARK_CXX_LINKER_FLAGS -nodefaultlibs) + # -lc++ cannot be added directly to CMAKE__LINKER_FLAGS because + # linker flags appear before all linker inputs and -lc++ must appear after. + list(APPEND BENCHMARK_CXX_LIBRARIES c++) + else() + message(FATAL "-DBENCHMARK_USE_LIBCXX:BOOL=ON is not supported for compiler") + endif() +endif(BENCHMARK_USE_LIBCXX) + +# C++ feature checks +# Determine the correct regular expression engine to use +cxx_feature_check(STD_REGEX) +cxx_feature_check(GNU_POSIX_REGEX) +cxx_feature_check(POSIX_REGEX) +if(NOT HAVE_STD_REGEX AND NOT HAVE_GNU_POSIX_REGEX AND NOT HAVE_POSIX_REGEX) + message(FATAL_ERROR "Failed to determine the source files for the regular expression backend") +endif() +if (NOT BENCHMARK_ENABLE_EXCEPTIONS AND HAVE_STD_REGEX + AND NOT HAVE_GNU_POSIX_REGEX AND NOT HAVE_POSIX_REGEX) + message(WARNING "Using std::regex with exceptions disabled is not fully supported") +endif() +cxx_feature_check(STEADY_CLOCK) +# Ensure we have pthreads +find_package(Threads REQUIRED) + +# Set up directories +include_directories(${PROJECT_SOURCE_DIR}/include) + +# Build the targets +add_subdirectory(src) + +if (BENCHMARK_ENABLE_TESTING) + enable_testing() + add_subdirectory(test) +endif() diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md new file mode 100644 index 0000000..43de4c9 --- /dev/null +++ b/CONTRIBUTING.md @@ -0,0 +1,58 @@ +# How to contribute # + +We'd love to accept your patches and contributions to this project. There are +a just a few small guidelines you need to follow. + + +## Contributor License Agreement ## + +Contributions to any Google project must be accompanied by a Contributor +License Agreement. This is not a copyright **assignment**, it simply gives +Google permission to use and redistribute your contributions as part of the +project. + + * If you are an individual writing original source code and you're sure you + own the intellectual property, then you'll need to sign an [individual + CLA][]. + + * If you work for a company that wants to allow you to contribute your work, + then you'll need to sign a [corporate CLA][]. + +You generally only need to submit a CLA once, so if you've already submitted +one (even if it was for a different project), you probably don't need to do it +again. + +[individual CLA]: https://developers.google.com/open-source/cla/individual +[corporate CLA]: https://developers.google.com/open-source/cla/corporate + +Once your CLA is submitted (or if you already submitted one for +another Google project), make a commit adding yourself to the +[AUTHORS][] and [CONTRIBUTORS][] files. This commit can be part +of your first [pull request][]. + +[AUTHORS]: AUTHORS +[CONTRIBUTORS]: CONTRIBUTORS + + +## Submitting a patch ## + + 1. It's generally best to start by opening a new issue describing the bug or + feature you're intending to fix. Even if you think it's relatively minor, + it's helpful to know what people are working on. Mention in the initial + issue that you are planning to work on that bug or feature so that it can + be assigned to you. + + 1. Follow the normal process of [forking][] the project, and setup a new + branch to work in. It's important that each group of changes be done in + separate branches in order to ensure that a pull request only includes the + commits related to that bug or feature. + + 1. Do your best to have [well-formed commit messages][] for each change. + This provides consistency throughout the project, and ensures that commit + messages are able to be formatted properly by various git tools. + + 1. Finally, push the commits to your fork and submit a [pull request][]. + +[forking]: https://help.github.com/articles/fork-a-repo +[well-formed commit messages]: http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html +[pull request]: https://help.github.com/articles/creating-a-pull-request diff --git a/CONTRIBUTORS b/CONTRIBUTORS new file mode 100644 index 0000000..9abb608 --- /dev/null +++ b/CONTRIBUTORS @@ -0,0 +1,59 @@ +# People who have agreed to one of the CLAs and can contribute patches. +# The AUTHORS file lists the copyright holders; this file +# lists people. For example, Google employees are listed here +# but not in AUTHORS, because Google holds the copyright. +# +# Names should be added to this file only after verifying that +# the individual or the individual's organization has agreed to +# the appropriate Contributor License Agreement, found here: +# +# https://developers.google.com/open-source/cla/individual +# https://developers.google.com/open-source/cla/corporate +# +# The agreement for individuals can be filled out on the web. +# +# When adding J Random Contributor's name to this file, +# either J's name or J's organization's name should be +# added to the AUTHORS file, depending on whether the +# individual or corporate CLA was used. +# +# Names should be added to this file as: +# Name +# +# Please keep the list sorted. + +Albert Pretorius +Arne Beer +Billy Robert O'Neal III +Chris Kennelly +Christopher Seymour +David Coeurjolly +Dominic Hamon +Eric Fiselier +Eugene Zhuk +Evgeny Safronov +Felix Homann +Ismael Jimenez Martinez +Jern-Kuan Leong +Joao Paulo Magalhaes +JianXiong Zhou +Jussi Knuuttila +Kaito Udagawa +Kai Wolf +Lei Xu +Matt Clarkson +Maxim Vafin +Nick Hutchinson +Oleksandr Sochka +Pascal Leroy +Paul Redmond +Pierre Phaneuf +Radoslav Yovchev +Ray Glover +Shuo Chen +Tom Madams +Yixuan Qiu +Yusuke Suzuki +Tobias Ulvgård +Zbigniew Skowron +Dominik Czarnota diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..d645695 --- /dev/null +++ b/LICENSE @@ -0,0 +1,202 @@ + + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/README.md b/README.md new file mode 100644 index 0000000..2430d93 --- /dev/null +++ b/README.md @@ -0,0 +1,726 @@ +# benchmark +[![Build Status](https://travis-ci.org/google/benchmark.svg?branch=master)](https://travis-ci.org/google/benchmark) +[![Build status](https://ci.appveyor.com/api/projects/status/u0qsyp7t1tk7cpxs/branch/master?svg=true)](https://ci.appveyor.com/project/google/benchmark/branch/master) +[![Coverage Status](https://coveralls.io/repos/google/benchmark/badge.svg)](https://coveralls.io/r/google/benchmark) + +A library to support the benchmarking of functions, similar to unit-tests. + +Discussion group: https://groups.google.com/d/forum/benchmark-discuss + +IRC channel: https://freenode.net #googlebenchmark + +[Known issues and common problems](#known-issues) + +[Additional Tooling Documentation](docs/tools.md) + +## Example usage +### Basic usage +Define a function that executes the code to be measured. + +```c++ +static void BM_StringCreation(benchmark::State& state) { + while (state.KeepRunning()) + std::string empty_string; +} +// Register the function as a benchmark +BENCHMARK(BM_StringCreation); + +// Define another benchmark +static void BM_StringCopy(benchmark::State& state) { + std::string x = "hello"; + while (state.KeepRunning()) + std::string copy(x); +} +BENCHMARK(BM_StringCopy); + +BENCHMARK_MAIN(); +``` + +### Passing arguments +Sometimes a family of benchmarks can be implemented with just one routine that +takes an extra argument to specify which one of the family of benchmarks to +run. For example, the following code defines a family of benchmarks for +measuring the speed of `memcpy()` calls of different lengths: + +```c++ +static void BM_memcpy(benchmark::State& state) { + char* src = new char[state.range(0)]; + char* dst = new char[state.range(0)]; + memset(src, 'x', state.range(0)); + while (state.KeepRunning()) + memcpy(dst, src, state.range(0)); + state.SetBytesProcessed(int64_t(state.iterations()) * + int64_t(state.range(0))); + delete[] src; + delete[] dst; +} +BENCHMARK(BM_memcpy)->Arg(8)->Arg(64)->Arg(512)->Arg(1<<10)->Arg(8<<10); +``` + +The preceding code is quite repetitive, and can be replaced with the following +short-hand. The following invocation will pick a few appropriate arguments in +the specified range and will generate a benchmark for each such argument. + +```c++ +BENCHMARK(BM_memcpy)->Range(8, 8<<10); +``` + +By default the arguments in the range are generated in multiples of eight and +the command above selects [ 8, 64, 512, 4k, 8k ]. In the following code the +range multiplier is changed to multiples of two. + +```c++ +BENCHMARK(BM_memcpy)->RangeMultiplier(2)->Range(8, 8<<10); +``` +Now arguments generated are [ 8, 16, 32, 64, 128, 256, 512, 1024, 2k, 4k, 8k ]. + +You might have a benchmark that depends on two or more inputs. For example, the +following code defines a family of benchmarks for measuring the speed of set +insertion. + +```c++ +static void BM_SetInsert(benchmark::State& state) { + while (state.KeepRunning()) { + state.PauseTiming(); + std::set data = ConstructRandomSet(state.range(0)); + state.ResumeTiming(); + for (int j = 0; j < state.range(1); ++j) + data.insert(RandomNumber()); + } +} +BENCHMARK(BM_SetInsert) + ->Args({1<<10, 1}) + ->Args({1<<10, 8}) + ->Args({1<<10, 64}) + ->Args({1<<10, 512}) + ->Args({8<<10, 1}) + ->Args({8<<10, 8}) + ->Args({8<<10, 64}) + ->Args({8<<10, 512}); +``` + +The preceding code is quite repetitive, and can be replaced with the following +short-hand. The following macro will pick a few appropriate arguments in the +product of the two specified ranges and will generate a benchmark for each such +pair. + +```c++ +BENCHMARK(BM_SetInsert)->Ranges({{1<<10, 8<<10}, {1, 512}}); +``` + +For more complex patterns of inputs, passing a custom function to `Apply` allows +programmatic specification of an arbitrary set of arguments on which to run the +benchmark. The following example enumerates a dense range on one parameter, +and a sparse range on the second. + +```c++ +static void CustomArguments(benchmark::internal::Benchmark* b) { + for (int i = 0; i <= 10; ++i) + for (int j = 32; j <= 1024*1024; j *= 8) + b->Args({i, j}); +} +BENCHMARK(BM_SetInsert)->Apply(CustomArguments); +``` + +### Calculate asymptotic complexity (Big O) +Asymptotic complexity might be calculated for a family of benchmarks. The +following code will calculate the coefficient for the high-order term in the +running time and the normalized root-mean square error of string comparison. + +```c++ +static void BM_StringCompare(benchmark::State& state) { + std::string s1(state.range(0), '-'); + std::string s2(state.range(0), '-'); + while (state.KeepRunning()) { + benchmark::DoNotOptimize(s1.compare(s2)); + } + state.SetComplexityN(state.range(0)); +} +BENCHMARK(BM_StringCompare) + ->RangeMultiplier(2)->Range(1<<10, 1<<18)->Complexity(benchmark::oN); +``` + +As shown in the following invocation, asymptotic complexity might also be +calculated automatically. + +```c++ +BENCHMARK(BM_StringCompare) + ->RangeMultiplier(2)->Range(1<<10, 1<<18)->Complexity(); +``` + +The following code will specify asymptotic complexity with a lambda function, +that might be used to customize high-order term calculation. + +```c++ +BENCHMARK(BM_StringCompare)->RangeMultiplier(2) + ->Range(1<<10, 1<<18)->Complexity([](int n)->double{return n; }); +``` + +### Templated benchmarks +Templated benchmarks work the same way: This example produces and consumes +messages of size `sizeof(v)` `range_x` times. It also outputs throughput in the +absence of multiprogramming. + +```c++ +template int BM_Sequential(benchmark::State& state) { + Q q; + typename Q::value_type v; + while (state.KeepRunning()) { + for (int i = state.range(0); i--; ) + q.push(v); + for (int e = state.range(0); e--; ) + q.Wait(&v); + } + // actually messages, not bytes: + state.SetBytesProcessed( + static_cast(state.iterations())*state.range(0)); +} +BENCHMARK_TEMPLATE(BM_Sequential, WaitQueue)->Range(1<<0, 1<<10); +``` + +Three macros are provided for adding benchmark templates. + +```c++ +#if __cplusplus >= 201103L // C++11 and greater. +#define BENCHMARK_TEMPLATE(func, ...) // Takes any number of parameters. +#else // C++ < C++11 +#define BENCHMARK_TEMPLATE(func, arg1) +#endif +#define BENCHMARK_TEMPLATE1(func, arg1) +#define BENCHMARK_TEMPLATE2(func, arg1, arg2) +``` + +## Passing arbitrary arguments to a benchmark +In C++11 it is possible to define a benchmark that takes an arbitrary number +of extra arguments. The `BENCHMARK_CAPTURE(func, test_case_name, ...args)` +macro creates a benchmark that invokes `func` with the `benchmark::State` as +the first argument followed by the specified `args...`. +The `test_case_name` is appended to the name of the benchmark and +should describe the values passed. + +```c++ +template ` +void BM_takes_args(benchmark::State& state, ExtraArgs&&... extra_args) { + [...] +} +// Registers a benchmark named "BM_takes_args/int_string_test` that passes +// the specified values to `extra_args`. +BENCHMARK_CAPTURE(BM_takes_args, int_string_test, 42, std::string("abc")); +``` +Note that elements of `...args` may refer to global variables. Users should +avoid modifying global state inside of a benchmark. + +## Using RegisterBenchmark(name, fn, args...) + +The `RegisterBenchmark(name, func, args...)` function provides an alternative +way to create and register benchmarks. +`RegisterBenchmark(name, func, args...)` creates, registers, and returns a +pointer to a new benchmark with the specified `name` that invokes +`func(st, args...)` where `st` is a `benchmark::State` object. + +Unlike the `BENCHMARK` registration macros, which can only be used at the global +scope, the `RegisterBenchmark` can be called anywhere. This allows for +benchmark tests to be registered programmatically. + +Additionally `RegisterBenchmark` allows any callable object to be registered +as a benchmark. Including capturing lambdas and function objects. This +allows the creation + +For Example: +```c++ +auto BM_test = [](benchmark::State& st, auto Inputs) { /* ... */ }; + +int main(int argc, char** argv) { + for (auto& test_input : { /* ... */ }) + benchmark::RegisterBenchmark(test_input.name(), BM_test, test_input); + benchmark::Initialize(&argc, argv); + benchmark::RunSpecifiedBenchmarks(); +} +``` + +### Multithreaded benchmarks +In a multithreaded test (benchmark invoked by multiple threads simultaneously), +it is guaranteed that none of the threads will start until all have called +`KeepRunning`, and all will have finished before KeepRunning returns false. As +such, any global setup or teardown can be wrapped in a check against the thread +index: + +```c++ +static void BM_MultiThreaded(benchmark::State& state) { + if (state.thread_index == 0) { + // Setup code here. + } + while (state.KeepRunning()) { + // Run the test as normal. + } + if (state.thread_index == 0) { + // Teardown code here. + } +} +BENCHMARK(BM_MultiThreaded)->Threads(2); +``` + +If the benchmarked code itself uses threads and you want to compare it to +single-threaded code, you may want to use real-time ("wallclock") measurements +for latency comparisons: + +```c++ +BENCHMARK(BM_test)->Range(8, 8<<10)->UseRealTime(); +``` + +Without `UseRealTime`, CPU time is used by default. + + +## Manual timing +For benchmarking something for which neither CPU time nor real-time are +correct or accurate enough, completely manual timing is supported using +the `UseManualTime` function. + +When `UseManualTime` is used, the benchmarked code must call +`SetIterationTime` once per iteration of the `KeepRunning` loop to +report the manually measured time. + +An example use case for this is benchmarking GPU execution (e.g. OpenCL +or CUDA kernels, OpenGL or Vulkan or Direct3D draw calls), which cannot +be accurately measured using CPU time or real-time. Instead, they can be +measured accurately using a dedicated API, and these measurement results +can be reported back with `SetIterationTime`. + +```c++ +static void BM_ManualTiming(benchmark::State& state) { + int microseconds = state.range(0); + std::chrono::duration sleep_duration { + static_cast(microseconds) + }; + + while (state.KeepRunning()) { + auto start = std::chrono::high_resolution_clock::now(); + // Simulate some useful workload with a sleep + std::this_thread::sleep_for(sleep_duration); + auto end = std::chrono::high_resolution_clock::now(); + + auto elapsed_seconds = + std::chrono::duration_cast>( + end - start); + + state.SetIterationTime(elapsed_seconds.count()); + } +} +BENCHMARK(BM_ManualTiming)->Range(1, 1<<17)->UseManualTime(); +``` + +### Preventing optimisation +To prevent a value or expression from being optimized away by the compiler +the `benchmark::DoNotOptimize(...)` and `benchmark::ClobberMemory()` +functions can be used. + +```c++ +static void BM_test(benchmark::State& state) { + while (state.KeepRunning()) { + int x = 0; + for (int i=0; i < 64; ++i) { + benchmark::DoNotOptimize(x += i); + } + } +} +``` + +`DoNotOptimize()` forces the *result* of `` to be stored in either +memory or a register. For GNU based compilers it acts as read/write barrier +for global memory. More specifically it forces the compiler to flush pending +writes to memory and reload any other values as necessary. + +Note that `DoNotOptimize()` does not prevent optimizations on `` +in any way. `` may even be removed entirely when the result is already +known. For example: + +```c++ + /* Example 1: `` is removed entirely. */ + int foo(int x) { return x + 42; } + while (...) DoNotOptimize(foo(0)); // Optimized to DoNotOptimize(42); + + /* Example 2: Result of '' is only reused */ + int bar(int) __attribute__((const)); + while (...) DoNotOptimize(bar(0)); // Optimized to: + // int __result__ = bar(0); + // while (...) DoNotOptimize(__result__); +``` + +The second tool for preventing optimizations is `ClobberMemory()`. In essence +`ClobberMemory()` forces the compiler to perform all pending writes to global +memory. Memory managed by block scope objects must be "escaped" using +`DoNotOptimize(...)` before it can be clobbered. In the below example +`ClobberMemory()` prevents the call to `v.push_back(42)` from being optimized +away. + +```c++ +static void BM_vector_push_back(benchmark::State& state) { + while (state.KeepRunning()) { + std::vector v; + v.reserve(1); + benchmark::DoNotOptimize(v.data()); // Allow v.data() to be clobbered. + v.push_back(42); + benchmark::ClobberMemory(); // Force 42 to be written to memory. + } +} +``` + +Note that `ClobberMemory()` is only available for GNU or MSVC based compilers. + +### Set time unit manually +If a benchmark runs a few milliseconds it may be hard to visually compare the +measured times, since the output data is given in nanoseconds per default. In +order to manually set the time unit, you can specify it manually: + +```c++ +BENCHMARK(BM_test)->Unit(benchmark::kMillisecond); +``` + +## Controlling number of iterations +In all cases, the number of iterations for which the benchmark is run is +governed by the amount of time the benchmark takes. Concretely, the number of +iterations is at least one, not more than 1e9, until CPU time is greater than +the minimum time, or the wallclock time is 5x minimum time. The minimum time is +set as a flag `--benchmark_min_time` or per benchmark by calling `MinTime` on +the registered benchmark object. + +## Reporting the mean and standard devation by repeated benchmarks +By default each benchmark is run once and that single result is reported. +However benchmarks are often noisy and a single result may not be representative +of the overall behavior. For this reason it's possible to repeatedly rerun the +benchmark. + +The number of runs of each benchmark is specified globally by the +`--benchmark_repetitions` flag or on a per benchmark basis by calling +`Repetitions` on the registered benchmark object. When a benchmark is run +more than once the mean and standard deviation of the runs will be reported. + +Additionally the `--benchmark_report_aggregates_only={true|false}` flag or +`ReportAggregatesOnly(bool)` function can be used to change how repeated tests +are reported. By default the result of each repeated run is reported. When this +option is 'true' only the mean and standard deviation of the runs is reported. +Calling `ReportAggregatesOnly(bool)` on a registered benchmark object overrides +the value of the flag for that benchmark. + +## Fixtures +Fixture tests are created by +first defining a type that derives from ::benchmark::Fixture and then +creating/registering the tests using the following macros: + +* `BENCHMARK_F(ClassName, Method)` +* `BENCHMARK_DEFINE_F(ClassName, Method)` +* `BENCHMARK_REGISTER_F(ClassName, Method)` + +For Example: + +```c++ +class MyFixture : public benchmark::Fixture {}; + +BENCHMARK_F(MyFixture, FooTest)(benchmark::State& st) { + while (st.KeepRunning()) { + ... + } +} + +BENCHMARK_DEFINE_F(MyFixture, BarTest)(benchmark::State& st) { + while (st.KeepRunning()) { + ... + } +} +/* BarTest is NOT registered */ +BENCHMARK_REGISTER_F(MyFixture, BarTest)->Threads(2); +/* BarTest is now registered */ +``` + + +## User-defined counters + +You can add your own counters with user-defined names. The example below +will add columns "Foo", "Bar" and "Baz" in its output: + +```c++ +static void UserCountersExample1(benchmark::State& state) { + double numFoos = 0, numBars = 0, numBazs = 0; + while (state.KeepRunning()) { + // ... count Foo,Bar,Baz events + } + state.counters["Foo"] = numFoos; + state.counters["Bar"] = numBars; + state.counters["Baz"] = numBazs; +} +``` + +The `state.counters` object is a `std::map` with `std::string` keys +and `Counter` values. The latter is a `double`-like class, via an implicit +conversion to `double&`. Thus you can use all of the standard arithmetic +assignment operators (`=,+=,-=,*=,/=`) to change the value of each counter. + +In multithreaded benchmarks, each counter is set on the calling thread only. +When the benchmark finishes, the counters from each thread will be summed; +the resulting sum is the value which will be shown for the benchmark. + +The `Counter` constructor accepts two parameters: the value as a `double` +and a bit flag which allows you to show counters as rates and/or as +per-thread averages: + +```c++ + // sets a simple counter + state.counters["Foo"] = numFoos; + + // Set the counter as a rate. It will be presented divided + // by the duration of the benchmark. + state.counters["FooRate"] = Counter(numFoos, benchmark::Counter::kIsRate); + + // Set the counter as a thread-average quantity. It will + // be presented divided by the number of threads. + state.counters["FooAvg"] = Counter(numFoos, benchmark::Counter::kAvgThreads); + + // There's also a combined flag: + state.counters["FooAvgRate"] = Counter(numFoos,benchmark::Counter::kAvgThreadsRate); +``` + +When you're compiling in C++11 mode or later you can use `insert()` with +`std::initializer_list`: + +```c++ + // With C++11, this can be done: + state.counters.insert({{"Foo", numFoos}, {"Bar", numBars}, {"Baz", numBazs}}); + // ... instead of: + state.counters["Foo"] = numFoos; + state.counters["Bar"] = numBars; + state.counters["Baz"] = numBazs; +``` + +### Counter reporting + +When using the console reporter, by default, user counters are are printed at +the end after the table, the same way as ``bytes_processed`` and +``items_processed``. This is best for cases in which there are few counters, +or where there are only a couple of lines per benchmark. Here's an example of +the default output: + +``` +------------------------------------------------------------------------------ +Benchmark Time CPU Iterations UserCounters... +------------------------------------------------------------------------------ +BM_UserCounter/threads:8 2248 ns 10277 ns 68808 Bar=16 Bat=40 Baz=24 Foo=8 +BM_UserCounter/threads:1 9797 ns 9788 ns 71523 Bar=2 Bat=5 Baz=3 Foo=1024m +BM_UserCounter/threads:2 4924 ns 9842 ns 71036 Bar=4 Bat=10 Baz=6 Foo=2 +BM_UserCounter/threads:4 2589 ns 10284 ns 68012 Bar=8 Bat=20 Baz=12 Foo=4 +BM_UserCounter/threads:8 2212 ns 10287 ns 68040 Bar=16 Bat=40 Baz=24 Foo=8 +BM_UserCounter/threads:16 1782 ns 10278 ns 68144 Bar=32 Bat=80 Baz=48 Foo=16 +BM_UserCounter/threads:32 1291 ns 10296 ns 68256 Bar=64 Bat=160 Baz=96 Foo=32 +BM_UserCounter/threads:4 2615 ns 10307 ns 68040 Bar=8 Bat=20 Baz=12 Foo=4 +BM_Factorial 26 ns 26 ns 26608979 40320 +BM_Factorial/real_time 26 ns 26 ns 26587936 40320 +BM_CalculatePiRange/1 16 ns 16 ns 45704255 0 +BM_CalculatePiRange/8 73 ns 73 ns 9520927 3.28374 +BM_CalculatePiRange/64 609 ns 609 ns 1140647 3.15746 +BM_CalculatePiRange/512 4900 ns 4901 ns 142696 3.14355 +``` + +If this doesn't suit you, you can print each counter as a table column by +passing the flag `--benchmark_counters_tabular=true` to the benchmark +application. This is best for cases in which there are a lot of counters, or +a lot of lines per individual benchmark. Note that this will trigger a +reprinting of the table header any time the counter set changes between +individual benchmarks. Here's an example of corresponding output when +`--benchmark_counters_tabular=true` is passed: + +``` +--------------------------------------------------------------------------------------- +Benchmark Time CPU Iterations Bar Bat Baz Foo +--------------------------------------------------------------------------------------- +BM_UserCounter/threads:8 2198 ns 9953 ns 70688 16 40 24 8 +BM_UserCounter/threads:1 9504 ns 9504 ns 73787 2 5 3 1 +BM_UserCounter/threads:2 4775 ns 9550 ns 72606 4 10 6 2 +BM_UserCounter/threads:4 2508 ns 9951 ns 70332 8 20 12 4 +BM_UserCounter/threads:8 2055 ns 9933 ns 70344 16 40 24 8 +BM_UserCounter/threads:16 1610 ns 9946 ns 70720 32 80 48 16 +BM_UserCounter/threads:32 1192 ns 9948 ns 70496 64 160 96 32 +BM_UserCounter/threads:4 2506 ns 9949 ns 70332 8 20 12 4 +-------------------------------------------------------------- +Benchmark Time CPU Iterations +-------------------------------------------------------------- +BM_Factorial 26 ns 26 ns 26392245 40320 +BM_Factorial/real_time 26 ns 26 ns 26494107 40320 +BM_CalculatePiRange/1 15 ns 15 ns 45571597 0 +BM_CalculatePiRange/8 74 ns 74 ns 9450212 3.28374 +BM_CalculatePiRange/64 595 ns 595 ns 1173901 3.15746 +BM_CalculatePiRange/512 4752 ns 4752 ns 147380 3.14355 +BM_CalculatePiRange/4k 37970 ns 37972 ns 18453 3.14184 +BM_CalculatePiRange/32k 303733 ns 303744 ns 2305 3.14162 +BM_CalculatePiRange/256k 2434095 ns 2434186 ns 288 3.1416 +BM_CalculatePiRange/1024k 9721140 ns 9721413 ns 71 3.14159 +BM_CalculatePi/threads:8 2255 ns 9943 ns 70936 +``` +Note above the additional header printed when the benchmark changes from +``BM_UserCounter`` to ``BM_Factorial``. This is because ``BM_Factorial`` does +not have the same counter set as ``BM_UserCounter``. + +## Exiting Benchmarks in Error + +When errors caused by external influences, such as file I/O and network +communication, occur within a benchmark the +`State::SkipWithError(const char* msg)` function can be used to skip that run +of benchmark and report the error. Note that only future iterations of the +`KeepRunning()` are skipped. Users may explicitly return to exit the +benchmark immediately. + +The `SkipWithError(...)` function may be used at any point within the benchmark, +including before and after the `KeepRunning()` loop. + +For example: + +```c++ +static void BM_test(benchmark::State& state) { + auto resource = GetResource(); + if (!resource.good()) { + state.SkipWithError("Resource is not good!"); + // KeepRunning() loop will not be entered. + } + while (state.KeepRunning()) { + auto data = resource.read_data(); + if (!resource.good()) { + state.SkipWithError("Failed to read data!"); + break; // Needed to skip the rest of the iteration. + } + do_stuff(data); + } +} +``` + +## Running a subset of the benchmarks + +The `--benchmark_filter=` option can be used to only run the benchmarks +which match the specified ``. For example: + +```bash +$ ./run_benchmarks.x --benchmark_filter=BM_memcpy/32 +Run on (1 X 2300 MHz CPU ) +2016-06-25 19:34:24 +Benchmark Time CPU Iterations +---------------------------------------------------- +BM_memcpy/32 11 ns 11 ns 79545455 +BM_memcpy/32k 2181 ns 2185 ns 324074 +BM_memcpy/32 12 ns 12 ns 54687500 +BM_memcpy/32k 1834 ns 1837 ns 357143 +``` + + +## Output Formats +The library supports multiple output formats. Use the +`--benchmark_format=` flag to set the format type. `console` +is the default format. + +The Console format is intended to be a human readable format. By default +the format generates color output. Context is output on stderr and the +tabular data on stdout. Example tabular output looks like: +``` +Benchmark Time(ns) CPU(ns) Iterations +---------------------------------------------------------------------- +BM_SetInsert/1024/1 28928 29349 23853 133.097kB/s 33.2742k items/s +BM_SetInsert/1024/8 32065 32913 21375 949.487kB/s 237.372k items/s +BM_SetInsert/1024/10 33157 33648 21431 1.13369MB/s 290.225k items/s +``` + +The JSON format outputs human readable json split into two top level attributes. +The `context` attribute contains information about the run in general, including +information about the CPU and the date. +The `benchmarks` attribute contains a list of ever benchmark run. Example json +output looks like: +```json +{ + "context": { + "date": "2015/03/17-18:40:25", + "num_cpus": 40, + "mhz_per_cpu": 2801, + "cpu_scaling_enabled": false, + "build_type": "debug" + }, + "benchmarks": [ + { + "name": "BM_SetInsert/1024/1", + "iterations": 94877, + "real_time": 29275, + "cpu_time": 29836, + "bytes_per_second": 134066, + "items_per_second": 33516 + }, + { + "name": "BM_SetInsert/1024/8", + "iterations": 21609, + "real_time": 32317, + "cpu_time": 32429, + "bytes_per_second": 986770, + "items_per_second": 246693 + }, + { + "name": "BM_SetInsert/1024/10", + "iterations": 21393, + "real_time": 32724, + "cpu_time": 33355, + "bytes_per_second": 1199226, + "items_per_second": 299807 + } + ] +} +``` + +The CSV format outputs comma-separated values. The `context` is output on stderr +and the CSV itself on stdout. Example CSV output looks like: +``` +name,iterations,real_time,cpu_time,bytes_per_second,items_per_second,label +"BM_SetInsert/1024/1",65465,17890.7,8407.45,475768,118942, +"BM_SetInsert/1024/8",116606,18810.1,9766.64,3.27646e+06,819115, +"BM_SetInsert/1024/10",106365,17238.4,8421.53,4.74973e+06,1.18743e+06, +``` + +## Output Files +The library supports writing the output of the benchmark to a file specified +by `--benchmark_out=`. The format of the output can be specified +using `--benchmark_out_format={json|console|csv}`. Specifying +`--benchmark_out` does not suppress the console output. + +## Debug vs Release +By default, benchmark builds as a debug library. You will see a warning in the output when this is the case. To build it as a release library instead, use: + +``` +cmake -DCMAKE_BUILD_TYPE=Release +``` + +To enable link-time optimisation, use + +``` +cmake -DCMAKE_BUILD_TYPE=Release -DBENCHMARK_ENABLE_LTO=true +``` + +## Linking against the library +When using gcc, it is necessary to link against pthread to avoid runtime exceptions. +This is due to how gcc implements std::thread. +See [issue #67](https://github.com/google/benchmark/issues/67) for more details. + +## Compiler Support + +Google Benchmark uses C++11 when building the library. As such we require +a modern C++ toolchain, both compiler and standard library. + +The following minimum versions are strongly recommended build the library: + +* GCC 4.8 +* Clang 3.4 +* Visual Studio 2013 +* Intel 2015 Update 1 + +Anything older *may* work. + +Note: Using the library and its headers in C++03 is supported. C++11 is only +required to build the library. + +# Known Issues + +### Windows + +* Users must manually link `shlwapi.lib`. Failure to do so may result +in unresolved symbols. + diff --git a/appveyor.yml b/appveyor.yml new file mode 100644 index 0000000..e084f38 --- /dev/null +++ b/appveyor.yml @@ -0,0 +1,56 @@ +version: '{build}' + +image: Visual Studio 2017 + +configuration: + - Debug + - Release + +environment: + matrix: + - compiler: msvc-15-seh + generator: "Visual Studio 15 2017" + + - compiler: msvc-15-seh + generator: "Visual Studio 15 2017 Win64" + + - compiler: msvc-14-seh + generator: "Visual Studio 14 2015" + + - compiler: msvc-14-seh + generator: "Visual Studio 14 2015 Win64" + + - compiler: msvc-12-seh + generator: "Visual Studio 12 2013" + + - compiler: msvc-12-seh + generator: "Visual Studio 12 2013 Win64" + + - compiler: gcc-5.3.0-posix + generator: "MinGW Makefiles" + cxx_path: 'C:\mingw-w64\i686-5.3.0-posix-dwarf-rt_v4-rev0\mingw32\bin' + APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2015 + +matrix: + fast_finish: true + +install: + # git bash conflicts with MinGW makefiles + - if "%generator%"=="MinGW Makefiles" (set "PATH=%PATH:C:\Program Files\Git\usr\bin;=%") + - if not "%cxx_path%"=="" (set "PATH=%PATH%;%cxx_path%") + +build_script: + - md _build -Force + - cd _build + - echo %configuration% + - cmake -G "%generator%" "-DCMAKE_BUILD_TYPE=%configuration%" .. + - cmake --build . --config %configuration% + +test_script: + - ctest -c %configuration% --timeout 300 --output-on-failure + +artifacts: + - path: '_build/CMakeFiles/*.log' + name: logs + - path: '_build/Testing/**/*.xml' + name: test_results diff --git a/cmake/AddCXXCompilerFlag.cmake b/cmake/AddCXXCompilerFlag.cmake new file mode 100644 index 0000000..0b176ba --- /dev/null +++ b/cmake/AddCXXCompilerFlag.cmake @@ -0,0 +1,64 @@ +# - Adds a compiler flag if it is supported by the compiler +# +# This function checks that the supplied compiler flag is supported and then +# adds it to the corresponding compiler flags +# +# add_cxx_compiler_flag( []) +# +# - Example +# +# include(AddCXXCompilerFlag) +# add_cxx_compiler_flag(-Wall) +# add_cxx_compiler_flag(-no-strict-aliasing RELEASE) +# Requires CMake 2.6+ + +if(__add_cxx_compiler_flag) + return() +endif() +set(__add_cxx_compiler_flag INCLUDED) + +include(CheckCXXCompilerFlag) + +function(mangle_compiler_flag FLAG OUTPUT) + string(TOUPPER "HAVE_CXX_FLAG_${FLAG}" SANITIZED_FLAG) + string(REPLACE "+" "X" SANITIZED_FLAG ${SANITIZED_FLAG}) + string(REGEX REPLACE "[^A-Za-z_0-9]" "_" SANITIZED_FLAG ${SANITIZED_FLAG}) + string(REGEX REPLACE "_+" "_" SANITIZED_FLAG ${SANITIZED_FLAG}) + set(${OUTPUT} "${SANITIZED_FLAG}" PARENT_SCOPE) +endfunction(mangle_compiler_flag) + +function(add_cxx_compiler_flag FLAG) + mangle_compiler_flag("${FLAG}" MANGLED_FLAG) + set(OLD_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}") + set(CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS} ${FLAG}") + check_cxx_compiler_flag("${FLAG}" ${MANGLED_FLAG}) + set(CMAKE_REQUIRED_FLAGS "${OLD_CMAKE_REQUIRED_FLAGS}") + if(${MANGLED_FLAG}) + set(VARIANT ${ARGV1}) + if(ARGV1) + string(TOUPPER "_${VARIANT}" VARIANT) + endif() + set(CMAKE_CXX_FLAGS${VARIANT} "${CMAKE_CXX_FLAGS${VARIANT}} ${FLAG}" PARENT_SCOPE) + endif() +endfunction() + +function(add_required_cxx_compiler_flag FLAG) + mangle_compiler_flag("${FLAG}" MANGLED_FLAG) + set(OLD_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}") + set(CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS} ${FLAG}") + check_cxx_compiler_flag("${FLAG}" ${MANGLED_FLAG}) + set(CMAKE_REQUIRED_FLAGS "${OLD_CMAKE_REQUIRED_FLAGS}") + if(${MANGLED_FLAG}) + set(VARIANT ${ARGV1}) + if(ARGV1) + string(TOUPPER "_${VARIANT}" VARIANT) + endif() + set(CMAKE_CXX_FLAGS${VARIANT} "${CMAKE_CXX_FLAGS${VARIANT}} ${FLAG}" PARENT_SCOPE) + set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${FLAG}" PARENT_SCOPE) + set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} ${FLAG}" PARENT_SCOPE) + set(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} ${FLAG}" PARENT_SCOPE) + set(CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS} ${FLAG}" PARENT_SCOPE) + else() + message(FATAL_ERROR "Required flag '${FLAG}' is not supported by the compiler") + endif() +endfunction() diff --git a/cmake/CXXFeatureCheck.cmake b/cmake/CXXFeatureCheck.cmake new file mode 100644 index 0000000..2c4460f --- /dev/null +++ b/cmake/CXXFeatureCheck.cmake @@ -0,0 +1,46 @@ +# - Compile and run code to check for C++ features +# +# This functions compiles a source file under the `cmake` folder +# and adds the corresponding `HAVE_[FILENAME]` flag to the CMake +# environment +# +# cxx_feature_check( []) +# +# - Example +# +# include(CXXFeatureCheck) +# cxx_feature_check(STD_REGEX) +# Requires CMake 2.8.12+ + +if(__cxx_feature_check) + return() +endif() +set(__cxx_feature_check INCLUDED) + +function(cxx_feature_check FILE) + string(TOLOWER ${FILE} FILE) + string(TOUPPER ${FILE} VAR) + string(TOUPPER "HAVE_${VAR}" FEATURE) + if (DEFINED HAVE_${VAR}) + set(HAVE_${VAR} 1 CACHE INTERNAL "Feature test for ${FILE}" PARENT_SCOPE) + add_definitions(-DHAVE_${VAR}) + return() + endif() + message("-- Performing Test ${FEATURE}") + try_run(RUN_${FEATURE} COMPILE_${FEATURE} + ${CMAKE_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/cmake/${FILE}.cpp + CMAKE_FLAGS ${BENCHMARK_CXX_LINKER_FLAGS} + LINK_LIBRARIES ${BENCHMARK_CXX_LIBRARIES}) + if(RUN_${FEATURE} EQUAL 0) + message("-- Performing Test ${FEATURE} -- success") + set(HAVE_${VAR} 1 CACHE INTERNAL "Feature test for ${FILE}" PARENT_SCOPE) + add_definitions(-DHAVE_${VAR}) + else() + if(NOT COMPILE_${FEATURE}) + message("-- Performing Test ${FEATURE} -- failed to compile") + else() + message("-- Performing Test ${FEATURE} -- compiled but failed to run") + endif() + endif() +endfunction() + diff --git a/cmake/Config.cmake.in b/cmake/Config.cmake.in new file mode 100644 index 0000000..6e9256e --- /dev/null +++ b/cmake/Config.cmake.in @@ -0,0 +1 @@ +include("${CMAKE_CURRENT_LIST_DIR}/@targets_export_name@.cmake") diff --git a/cmake/GetGitVersion.cmake b/cmake/GetGitVersion.cmake new file mode 100644 index 0000000..8dd9480 --- /dev/null +++ b/cmake/GetGitVersion.cmake @@ -0,0 +1,51 @@ +# - Returns a version string from Git tags +# +# This function inspects the annotated git tags for the project and returns a string +# into a CMake variable +# +# get_git_version() +# +# - Example +# +# include(GetGitVersion) +# get_git_version(GIT_VERSION) +# +# Requires CMake 2.8.11+ +find_package(Git) + +if(__get_git_version) + return() +endif() +set(__get_git_version INCLUDED) + +function(get_git_version var) + if(GIT_EXECUTABLE) + execute_process(COMMAND ${GIT_EXECUTABLE} describe --match "v[0-9]*.[0-9]*.[0-9]*" --abbrev=8 + RESULT_VARIABLE status + OUTPUT_VARIABLE GIT_VERSION + ERROR_QUIET) + if(${status}) + set(GIT_VERSION "v0.0.0") + else() + string(STRIP ${GIT_VERSION} GIT_VERSION) + string(REGEX REPLACE "-[0-9]+-g" "-" GIT_VERSION ${GIT_VERSION}) + endif() + + # Work out if the repository is dirty + execute_process(COMMAND ${GIT_EXECUTABLE} update-index -q --refresh + OUTPUT_QUIET + ERROR_QUIET) + execute_process(COMMAND ${GIT_EXECUTABLE} diff-index --name-only HEAD -- + OUTPUT_VARIABLE GIT_DIFF_INDEX + ERROR_QUIET) + string(COMPARE NOTEQUAL "${GIT_DIFF_INDEX}" "" GIT_DIRTY) + if (${GIT_DIRTY}) + set(GIT_VERSION "${GIT_VERSION}-dirty") + endif() + else() + set(GIT_VERSION "v0.0.0") + endif() + + message("-- git Version: ${GIT_VERSION}") + set(${var} ${GIT_VERSION} PARENT_SCOPE) +endfunction() diff --git a/cmake/gnu_posix_regex.cpp b/cmake/gnu_posix_regex.cpp new file mode 100644 index 0000000..b5b91cd --- /dev/null +++ b/cmake/gnu_posix_regex.cpp @@ -0,0 +1,12 @@ +#include +#include +int main() { + std::string str = "test0159"; + regex_t re; + int ec = regcomp(&re, "^[a-z]+[0-9]+$", REG_EXTENDED | REG_NOSUB); + if (ec != 0) { + return ec; + } + return regexec(&re, str.c_str(), 0, nullptr, 0) ? -1 : 0; +} + diff --git a/cmake/posix_regex.cpp b/cmake/posix_regex.cpp new file mode 100644 index 0000000..466dc62 --- /dev/null +++ b/cmake/posix_regex.cpp @@ -0,0 +1,14 @@ +#include +#include +int main() { + std::string str = "test0159"; + regex_t re; + int ec = regcomp(&re, "^[a-z]+[0-9]+$", REG_EXTENDED | REG_NOSUB); + if (ec != 0) { + return ec; + } + int ret = regexec(&re, str.c_str(), 0, nullptr, 0) ? -1 : 0; + regfree(&re); + return ret; +} + diff --git a/cmake/std_regex.cpp b/cmake/std_regex.cpp new file mode 100644 index 0000000..696f2a2 --- /dev/null +++ b/cmake/std_regex.cpp @@ -0,0 +1,10 @@ +#include +#include +int main() { + const std::string str = "test0159"; + std::regex re; + re = std::regex("^[a-z]+[0-9]+$", + std::regex_constants::extended | std::regex_constants::nosubs); + return std::regex_search(str, re) ? 0 : -1; +} + diff --git a/cmake/steady_clock.cpp b/cmake/steady_clock.cpp new file mode 100644 index 0000000..66d50d1 --- /dev/null +++ b/cmake/steady_clock.cpp @@ -0,0 +1,7 @@ +#include + +int main() { + typedef std::chrono::steady_clock Clock; + Clock::time_point tp = Clock::now(); + ((void)tp); +} diff --git a/cmake/thread_safety_attributes.cpp b/cmake/thread_safety_attributes.cpp new file mode 100644 index 0000000..46161ba --- /dev/null +++ b/cmake/thread_safety_attributes.cpp @@ -0,0 +1,4 @@ +#define HAVE_THREAD_SAFETY_ATTRIBUTES +#include "../src/mutex.h" + +int main() {} diff --git a/docs/tools.md b/docs/tools.md new file mode 100644 index 0000000..f176f74 --- /dev/null +++ b/docs/tools.md @@ -0,0 +1,59 @@ +# Benchmark Tools + +## compare_bench.py + +The `compare_bench.py` utility which can be used to compare the result of benchmarks. +The program is invoked like: + +``` bash +$ compare_bench.py [benchmark options]... +``` + +Where `` and `` either specify a benchmark executable file, or a JSON output file. The type of the input file is automatically detected. If a benchmark executable is specified then the benchmark is run to obtain the results. Otherwise the results are simply loaded from the output file. + +The sample output using the JSON test files under `Inputs/` gives: + +``` bash +$ ./compare_bench.py ./gbench/Inputs/test1_run1.json ./gbench/Inputs/test1_run2.json +Comparing ./gbench/Inputs/test1_run1.json to ./gbench/Inputs/test1_run2.json +Benchmark Time CPU +---------------------------------------------- +BM_SameTimes +0.00 +0.00 +BM_2xFaster -0.50 -0.50 +BM_2xSlower +1.00 +1.00 +BM_10PercentFaster -0.10 -0.10 +BM_10PercentSlower +0.10 +0.10 +``` + +When a benchmark executable is run, the raw output from the benchmark is printed in real time to stdout. The sample output using `benchmark/basic_test` for both arguments looks like: + +``` +./compare_bench.py test/basic_test test/basic_test --benchmark_filter=BM_empty.* +RUNNING: test/basic_test --benchmark_filter=BM_empty.* +Run on (4 X 4228.32 MHz CPU s) +2016-08-02 19:21:33 +Benchmark Time CPU Iterations +-------------------------------------------------------------------- +BM_empty 9 ns 9 ns 79545455 +BM_empty/threads:4 4 ns 9 ns 75268816 +BM_empty_stop_start 8 ns 8 ns 83333333 +BM_empty_stop_start/threads:4 3 ns 8 ns 83333332 +RUNNING: test/basic_test --benchmark_filter=BM_empty.* +Run on (4 X 4228.32 MHz CPU s) +2016-08-02 19:21:35 +Benchmark Time CPU Iterations +-------------------------------------------------------------------- +BM_empty 9 ns 9 ns 76086957 +BM_empty/threads:4 4 ns 9 ns 76086956 +BM_empty_stop_start 8 ns 8 ns 87500000 +BM_empty_stop_start/threads:4 3 ns 8 ns 88607596 +Comparing test/basic_test to test/basic_test +Benchmark Time CPU +--------------------------------------------------------- +BM_empty +0.00 +0.00 +BM_empty/threads:4 +0.00 +0.00 +BM_empty_stop_start +0.00 +0.00 +BM_empty_stop_start/threads:4 +0.00 +0.00 +``` + +Obviously this example doesn't give any useful output, but it's intended to show the output format when 'compare_bench.py' needs to run benchmarks. diff --git a/include/benchmark/benchmark.h b/include/benchmark/benchmark.h new file mode 100644 index 0000000..bd3b0ff --- /dev/null +++ b/include/benchmark/benchmark.h @@ -0,0 +1,1210 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +// Support for registering benchmarks for functions. + +/* Example usage: +// Define a function that executes the code to be measured a +// specified number of times: +static void BM_StringCreation(benchmark::State& state) { + while (state.KeepRunning()) + std::string empty_string; +} + +// Register the function as a benchmark +BENCHMARK(BM_StringCreation); + +// Define another benchmark +static void BM_StringCopy(benchmark::State& state) { + std::string x = "hello"; + while (state.KeepRunning()) + std::string copy(x); +} +BENCHMARK(BM_StringCopy); + +// Augment the main() program to invoke benchmarks if specified +// via the --benchmarks command line flag. E.g., +// my_unittest --benchmark_filter=all +// my_unittest --benchmark_filter=BM_StringCreation +// my_unittest --benchmark_filter=String +// my_unittest --benchmark_filter='Copy|Creation' +int main(int argc, char** argv) { + benchmark::Initialize(&argc, argv); + benchmark::RunSpecifiedBenchmarks(); + return 0; +} + +// Sometimes a family of microbenchmarks can be implemented with +// just one routine that takes an extra argument to specify which +// one of the family of benchmarks to run. For example, the following +// code defines a family of microbenchmarks for measuring the speed +// of memcpy() calls of different lengths: + +static void BM_memcpy(benchmark::State& state) { + char* src = new char[state.range(0)]; char* dst = new char[state.range(0)]; + memset(src, 'x', state.range(0)); + while (state.KeepRunning()) + memcpy(dst, src, state.range(0)); + state.SetBytesProcessed(int64_t(state.iterations()) * + int64_t(state.range(0))); + delete[] src; delete[] dst; +} +BENCHMARK(BM_memcpy)->Arg(8)->Arg(64)->Arg(512)->Arg(1<<10)->Arg(8<<10); + +// The preceding code is quite repetitive, and can be replaced with the +// following short-hand. The following invocation will pick a few +// appropriate arguments in the specified range and will generate a +// microbenchmark for each such argument. +BENCHMARK(BM_memcpy)->Range(8, 8<<10); + +// You might have a microbenchmark that depends on two inputs. For +// example, the following code defines a family of microbenchmarks for +// measuring the speed of set insertion. +static void BM_SetInsert(benchmark::State& state) { + while (state.KeepRunning()) { + state.PauseTiming(); + set data = ConstructRandomSet(state.range(0)); + state.ResumeTiming(); + for (int j = 0; j < state.range(1); ++j) + data.insert(RandomNumber()); + } +} +BENCHMARK(BM_SetInsert) + ->Args({1<<10, 1}) + ->Args({1<<10, 8}) + ->Args({1<<10, 64}) + ->Args({1<<10, 512}) + ->Args({8<<10, 1}) + ->Args({8<<10, 8}) + ->Args({8<<10, 64}) + ->Args({8<<10, 512}); + +// The preceding code is quite repetitive, and can be replaced with +// the following short-hand. The following macro will pick a few +// appropriate arguments in the product of the two specified ranges +// and will generate a microbenchmark for each such pair. +BENCHMARK(BM_SetInsert)->Ranges({{1<<10, 8<<10}, {1, 512}}); + +// For more complex patterns of inputs, passing a custom function +// to Apply allows programmatic specification of an +// arbitrary set of arguments to run the microbenchmark on. +// The following example enumerates a dense range on +// one parameter, and a sparse range on the second. +static void CustomArguments(benchmark::internal::Benchmark* b) { + for (int i = 0; i <= 10; ++i) + for (int j = 32; j <= 1024*1024; j *= 8) + b->Args({i, j}); +} +BENCHMARK(BM_SetInsert)->Apply(CustomArguments); + +// Templated microbenchmarks work the same way: +// Produce then consume 'size' messages 'iters' times +// Measures throughput in the absence of multiprogramming. +template int BM_Sequential(benchmark::State& state) { + Q q; + typename Q::value_type v; + while (state.KeepRunning()) { + for (int i = state.range(0); i--; ) + q.push(v); + for (int e = state.range(0); e--; ) + q.Wait(&v); + } + // actually messages, not bytes: + state.SetBytesProcessed( + static_cast(state.iterations())*state.range(0)); +} +BENCHMARK_TEMPLATE(BM_Sequential, WaitQueue)->Range(1<<0, 1<<10); + +Use `Benchmark::MinTime(double t)` to set the minimum time used to run the +benchmark. This option overrides the `benchmark_min_time` flag. + +void BM_test(benchmark::State& state) { + ... body ... +} +BENCHMARK(BM_test)->MinTime(2.0); // Run for at least 2 seconds. + +In a multithreaded test, it is guaranteed that none of the threads will start +until all have called KeepRunning, and all will have finished before KeepRunning +returns false. As such, any global setup or teardown you want to do can be +wrapped in a check against the thread index: + +static void BM_MultiThreaded(benchmark::State& state) { + if (state.thread_index == 0) { + // Setup code here. + } + while (state.KeepRunning()) { + // Run the test as normal. + } + if (state.thread_index == 0) { + // Teardown code here. + } +} +BENCHMARK(BM_MultiThreaded)->Threads(4); + + +If a benchmark runs a few milliseconds it may be hard to visually compare the +measured times, since the output data is given in nanoseconds per default. In +order to manually set the time unit, you can specify it manually: + +BENCHMARK(BM_test)->Unit(benchmark::kMillisecond); +*/ + +#ifndef BENCHMARK_BENCHMARK_H_ +#define BENCHMARK_BENCHMARK_H_ + + +#if __cplusplus >= 201103L +#define BENCHMARK_HAS_CXX11 +#endif + +#include + +#include +#include +#include +#include +#include +#include +#include + +#if defined(BENCHMARK_HAS_CXX11) +#include +#include +#include +#endif + +#if defined(_MSC_VER) +#include // for _ReadWriteBarrier +#endif + +#ifndef BENCHMARK_HAS_CXX11 +#define BENCHMARK_DISALLOW_COPY_AND_ASSIGN(TypeName) \ + TypeName(const TypeName&); \ + TypeName& operator=(const TypeName&) +#else +#define BENCHMARK_DISALLOW_COPY_AND_ASSIGN(TypeName) \ + TypeName(const TypeName&) = delete; \ + TypeName& operator=(const TypeName&) = delete +#endif + +#if defined(__GNUC__) +#define BENCHMARK_UNUSED __attribute__((unused)) +#define BENCHMARK_ALWAYS_INLINE __attribute__((always_inline)) +#define BENCHMARK_NOEXCEPT noexcept +#define BENCHMARK_NOEXCEPT_OP(x) noexcept(x) +#elif defined(_MSC_VER) && !defined(__clang__) +#define BENCHMARK_UNUSED +#define BENCHMARK_ALWAYS_INLINE __forceinline +#if _MSC_VER >= 1900 +#define BENCHMARK_NOEXCEPT noexcept +#define BENCHMARK_NOEXCEPT_OP(x) noexcept(x) +#else +#define BENCHMARK_NOEXCEPT +#define BENCHMARK_NOEXCEPT_OP(x) +#endif +#define __func__ __FUNCTION__ +#else +#define BENCHMARK_UNUSED +#define BENCHMARK_ALWAYS_INLINE +#define BENCHMARK_NOEXCEPT +#define BENCHMARK_NOEXCEPT_OP(x) +#endif + +#define BENCHMARK_INTERNAL_TOSTRING2(x) #x +#define BENCHMARK_INTERNAL_TOSTRING(x) BENCHMARK_INTERNAL_TOSTRING2(x) + +#if defined(__GNUC__) +#define BENCHMARK_BUILTIN_EXPECT(x, y) __builtin_expect(x, y) +#define BENCHMARK_DEPRECATED_MSG(msg) __attribute__((deprecated(msg))) +#else +#define BENCHMARK_BUILTIN_EXPECT(x, y) x +#define BENCHMARK_DEPRECATED_MSG(msg) +#define BENCHMARK_WARNING_MSG(msg) __pragma(message(__FILE__ "(" BENCHMARK_INTERNAL_TOSTRING(__LINE__) ") : warning note: " msg)) +#endif + +#if defined(__GNUC__) && !defined(__clang__) +#define BENCHMARK_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__) +#endif + + +namespace benchmark { +class BenchmarkReporter; + +void Initialize(int* argc, char** argv); + +// Report to stdout all arguments in 'argv' as unrecognized except the first. +// Returns true there is at least on unrecognized argument (i.e. 'argc' > 1). +bool ReportUnrecognizedArguments(int argc, char** argv); + +// Generate a list of benchmarks matching the specified --benchmark_filter flag +// and if --benchmark_list_tests is specified return after printing the name +// of each matching benchmark. Otherwise run each matching benchmark and +// report the results. +// +// The second and third overload use the specified 'console_reporter' and +// 'file_reporter' respectively. 'file_reporter' will write to the file +// specified +// by '--benchmark_output'. If '--benchmark_output' is not given the +// 'file_reporter' is ignored. +// +// RETURNS: The number of matching benchmarks. +size_t RunSpecifiedBenchmarks(); +size_t RunSpecifiedBenchmarks(BenchmarkReporter* console_reporter); +size_t RunSpecifiedBenchmarks(BenchmarkReporter* console_reporter, + BenchmarkReporter* file_reporter); + +// If this routine is called, peak memory allocation past this point in the +// benchmark is reported at the end of the benchmark report line. (It is +// computed by running the benchmark once with a single iteration and a memory +// tracer.) +// TODO(dominic) +// void MemoryUsage(); + +namespace internal { +class Benchmark; +class BenchmarkImp; +class BenchmarkFamilies; + +void UseCharPointer(char const volatile*); + +// Take ownership of the pointer and register the benchmark. Return the +// registered benchmark. +Benchmark* RegisterBenchmarkInternal(Benchmark*); + +// Ensure that the standard streams are properly initialized in every TU. +int InitializeStreams(); +BENCHMARK_UNUSED static int stream_init_anchor = InitializeStreams(); + +} // namespace internal + + +#if !defined(__GNUC__) || defined(__pnacl__) || defined(EMSCRIPTN) +# define BENCHMARK_HAS_NO_INLINE_ASSEMBLY +#endif + +// The DoNotOptimize(...) function can be used to prevent a value or +// expression from being optimized away by the compiler. This function is +// intended to add little to no overhead. +// See: https://youtu.be/nXaxk27zwlk?t=2441 +#ifndef BENCHMARK_HAS_NO_INLINE_ASSEMBLY +template +inline BENCHMARK_ALWAYS_INLINE void DoNotOptimize(Tp const& value) { + // Clang doesn't like the 'X' constraint on `value` and certain GCC versions + // don't like the 'g' constraint. Attempt to placate them both. +#if defined(__clang__) + asm volatile("" : : "g"(value) : "memory"); +#else + asm volatile("" : : "i,r,m"(value) : "memory"); +#endif +} +// Force the compiler to flush pending writes to global memory. Acts as an +// effective read/write barrier +inline BENCHMARK_ALWAYS_INLINE void ClobberMemory() { + asm volatile("" : : : "memory"); +} +#elif defined(_MSC_VER) +template +inline BENCHMARK_ALWAYS_INLINE void DoNotOptimize(Tp const& value) { + internal::UseCharPointer(&reinterpret_cast(value)); + _ReadWriteBarrier(); +} + +inline BENCHMARK_ALWAYS_INLINE void ClobberMemory() { + _ReadWriteBarrier(); +} +#else +template +inline BENCHMARK_ALWAYS_INLINE void DoNotOptimize(Tp const& value) { + internal::UseCharPointer(&reinterpret_cast(value)); +} +// FIXME Add ClobberMemory() for non-gnu and non-msvc compilers +#endif + + + +// This class is used for user-defined counters. +class Counter { +public: + + enum Flags { + kDefaults = 0, + // Mark the counter as a rate. It will be presented divided + // by the duration of the benchmark. + kIsRate = 1, + // Mark the counter as a thread-average quantity. It will be + // presented divided by the number of threads. + kAvgThreads = 2, + // Mark the counter as a thread-average rate. See above. + kAvgThreadsRate = kIsRate|kAvgThreads + }; + + double value; + Flags flags; + + BENCHMARK_ALWAYS_INLINE + Counter(double v = 0., Flags f = kDefaults) : value(v), flags(f) {} + + BENCHMARK_ALWAYS_INLINE operator double const& () const { return value; } + BENCHMARK_ALWAYS_INLINE operator double & () { return value; } + +}; + +// This is the container for the user-defined counters. +typedef std::map UserCounters; + + +// TimeUnit is passed to a benchmark in order to specify the order of magnitude +// for the measured time. +enum TimeUnit { kNanosecond, kMicrosecond, kMillisecond }; + +// BigO is passed to a benchmark in order to specify the asymptotic +// computational +// complexity for the benchmark. In case oAuto is selected, complexity will be +// calculated automatically to the best fit. +enum BigO { oNone, o1, oN, oNSquared, oNCubed, oLogN, oNLogN, oAuto, oLambda }; + +// BigOFunc is passed to a benchmark in order to specify the asymptotic +// computational complexity for the benchmark. +typedef double(BigOFunc)(int); + +namespace internal { +class ThreadTimer; +class ThreadManager; + +enum ReportMode +#if defined(BENCHMARK_HAS_CXX11) + : unsigned +#else +#endif + { + RM_Unspecified, // The mode has not been manually specified + RM_Default, // The mode is user-specified as default. + RM_ReportAggregatesOnly +}; +} // namespace internal + +// State is passed to a running Benchmark and contains state for the +// benchmark to use. +class State { + public: + // Returns true if the benchmark should continue through another iteration. + // NOTE: A benchmark may not return from the test until KeepRunning() has + // returned false. + bool KeepRunning() { + if (BENCHMARK_BUILTIN_EXPECT(!started_, false)) { + StartKeepRunning(); + } + bool const res = total_iterations_++ < max_iterations; + if (BENCHMARK_BUILTIN_EXPECT(!res, false)) { + FinishKeepRunning(); + } + return res; + } + + // REQUIRES: timer is running and 'SkipWithError(...)' has not been called + // by the current thread. + // Stop the benchmark timer. If not called, the timer will be + // automatically stopped after KeepRunning() returns false for the first time. + // + // For threaded benchmarks the PauseTiming() function only pauses the timing + // for the current thread. + // + // NOTE: The "real time" measurement is per-thread. If different threads + // report different measurements the largest one is reported. + // + // NOTE: PauseTiming()/ResumeTiming() are relatively + // heavyweight, and so their use should generally be avoided + // within each benchmark iteration, if possible. + void PauseTiming(); + + // REQUIRES: timer is not running and 'SkipWithError(...)' has not been called + // by the current thread. + // Start the benchmark timer. The timer is NOT running on entrance to the + // benchmark function. It begins running after the first call to KeepRunning() + // + // NOTE: PauseTiming()/ResumeTiming() are relatively + // heavyweight, and so their use should generally be avoided + // within each benchmark iteration, if possible. + void ResumeTiming(); + + // REQUIRES: 'SkipWithError(...)' has not been called previously by the + // current thread. + // Skip any future iterations of the 'KeepRunning()' loop in the current + // thread and report an error with the specified 'msg'. After this call + // the user may explicitly 'return' from the benchmark. + // + // For threaded benchmarks only the current thread stops executing and future + // calls to `KeepRunning()` will block until all threads have completed + // the `KeepRunning()` loop. If multiple threads report an error only the + // first error message is used. + // + // NOTE: Calling 'SkipWithError(...)' does not cause the benchmark to exit + // the current scope immediately. If the function is called from within + // the 'KeepRunning()' loop the current iteration will finish. It is the users + // responsibility to exit the scope as needed. + void SkipWithError(const char* msg); + + // REQUIRES: called exactly once per iteration of the KeepRunning loop. + // Set the manually measured time for this benchmark iteration, which + // is used instead of automatically measured time if UseManualTime() was + // specified. + // + // For threaded benchmarks the final value will be set to the largest + // reported values. + void SetIterationTime(double seconds); + + // Set the number of bytes processed by the current benchmark + // execution. This routine is typically called once at the end of a + // throughput oriented benchmark. If this routine is called with a + // value > 0, the report is printed in MB/sec instead of nanoseconds + // per iteration. + // + // REQUIRES: a benchmark has exited its KeepRunning loop. + BENCHMARK_ALWAYS_INLINE + void SetBytesProcessed(size_t bytes) { bytes_processed_ = bytes; } + + BENCHMARK_ALWAYS_INLINE + size_t bytes_processed() const { return bytes_processed_; } + + // If this routine is called with complexity_n > 0 and complexity report is + // requested for the + // family benchmark, then current benchmark will be part of the computation + // and complexity_n will + // represent the length of N. + BENCHMARK_ALWAYS_INLINE + void SetComplexityN(int complexity_n) { complexity_n_ = complexity_n; } + + BENCHMARK_ALWAYS_INLINE + int complexity_length_n() { return complexity_n_; } + + // If this routine is called with items > 0, then an items/s + // label is printed on the benchmark report line for the currently + // executing benchmark. It is typically called at the end of a processing + // benchmark where a processing items/second output is desired. + // + // REQUIRES: a benchmark has exited its KeepRunning loop. + BENCHMARK_ALWAYS_INLINE + void SetItemsProcessed(size_t items) { items_processed_ = items; } + + BENCHMARK_ALWAYS_INLINE + size_t items_processed() const { return items_processed_; } + + // If this routine is called, the specified label is printed at the + // end of the benchmark report line for the currently executing + // benchmark. Example: + // static void BM_Compress(benchmark::State& state) { + // ... + // double compress = input_size / output_size; + // state.SetLabel(StringPrintf("compress:%.1f%%", 100.0*compression)); + // } + // Produces output that looks like: + // BM_Compress 50 50 14115038 compress:27.3% + // + // REQUIRES: a benchmark has exited its KeepRunning loop. + void SetLabel(const char* label); + + void BENCHMARK_ALWAYS_INLINE SetLabel(const std::string& str) { + this->SetLabel(str.c_str()); + } + + // Range arguments for this run. CHECKs if the argument has been set. + BENCHMARK_ALWAYS_INLINE + int range(std::size_t pos = 0) const { + assert(range_.size() > pos); + return range_[pos]; + } + + BENCHMARK_DEPRECATED_MSG("use 'range(0)' instead") + int range_x() const { return range(0); } + + BENCHMARK_DEPRECATED_MSG("use 'range(1)' instead") + int range_y() const { return range(1); } + + BENCHMARK_ALWAYS_INLINE + size_t iterations() const { return total_iterations_; } + + private: + bool started_; + bool finished_; + size_t total_iterations_; + + std::vector range_; + + size_t bytes_processed_; + size_t items_processed_; + + int complexity_n_; + + bool error_occurred_; + + public: + // Container for user-defined counters. + UserCounters counters; + // Index of the executing thread. Values from [0, threads). + const int thread_index; + // Number of threads concurrently executing the benchmark. + const int threads; + const size_t max_iterations; + + // TODO(EricWF) make me private + State(size_t max_iters, const std::vector& ranges, int thread_i, + int n_threads, internal::ThreadTimer* timer, + internal::ThreadManager* manager); + + private: + void StartKeepRunning(); + void FinishKeepRunning(); + internal::ThreadTimer* timer_; + internal::ThreadManager* manager_; + BENCHMARK_DISALLOW_COPY_AND_ASSIGN(State); +}; + +namespace internal { + +typedef void(Function)(State&); + +// ------------------------------------------------------ +// Benchmark registration object. The BENCHMARK() macro expands +// into an internal::Benchmark* object. Various methods can +// be called on this object to change the properties of the benchmark. +// Each method returns "this" so that multiple method calls can +// chained into one expression. +class Benchmark { + public: + virtual ~Benchmark(); + + // Note: the following methods all return "this" so that multiple + // method calls can be chained together in one expression. + + // Run this benchmark once with "x" as the extra argument passed + // to the function. + // REQUIRES: The function passed to the constructor must accept an arg1. + Benchmark* Arg(int x); + + // Run this benchmark with the given time unit for the generated output report + Benchmark* Unit(TimeUnit unit); + + // Run this benchmark once for a number of values picked from the + // range [start..limit]. (start and limit are always picked.) + // REQUIRES: The function passed to the constructor must accept an arg1. + Benchmark* Range(int start, int limit); + + // Run this benchmark once for all values in the range [start..limit] with + // specific step + // REQUIRES: The function passed to the constructor must accept an arg1. + Benchmark* DenseRange(int start, int limit, int step = 1); + + // Run this benchmark once with "args" as the extra arguments passed + // to the function. + // REQUIRES: The function passed to the constructor must accept arg1, arg2 ... + Benchmark* Args(const std::vector& args); + + // Equivalent to Args({x, y}) + // NOTE: This is a legacy C++03 interface provided for compatibility only. + // New code should use 'Args'. + Benchmark* ArgPair(int x, int y) { + std::vector args; + args.push_back(x); + args.push_back(y); + return Args(args); + } + + // Run this benchmark once for a number of values picked from the + // ranges [start..limit]. (starts and limits are always picked.) + // REQUIRES: The function passed to the constructor must accept arg1, arg2 ... + Benchmark* Ranges(const std::vector >& ranges); + + // Equivalent to ArgNames({name}) + Benchmark* ArgName(const std::string& name); + + // Set the argument names to display in the benchmark name. If not called, + // only argument values will be shown. + Benchmark* ArgNames(const std::vector& names); + + // Equivalent to Ranges({{lo1, hi1}, {lo2, hi2}}). + // NOTE: This is a legacy C++03 interface provided for compatibility only. + // New code should use 'Ranges'. + Benchmark* RangePair(int lo1, int hi1, int lo2, int hi2) { + std::vector > ranges; + ranges.push_back(std::make_pair(lo1, hi1)); + ranges.push_back(std::make_pair(lo2, hi2)); + return Ranges(ranges); + } + + // Pass this benchmark object to *func, which can customize + // the benchmark by calling various methods like Arg, Args, + // Threads, etc. + Benchmark* Apply(void (*func)(Benchmark* benchmark)); + + // Set the range multiplier for non-dense range. If not called, the range + // multiplier kRangeMultiplier will be used. + Benchmark* RangeMultiplier(int multiplier); + + // Set the minimum amount of time to use when running this benchmark. This + // option overrides the `benchmark_min_time` flag. + // REQUIRES: `t > 0` and `Iterations` has not been called on this benchmark. + Benchmark* MinTime(double t); + + // Specify the amount of iterations that should be run by this benchmark. + // REQUIRES: 'n > 0' and `MinTime` has not been called on this benchmark. + // + // NOTE: This function should only be used when *exact* iteration control is + // needed and never to control or limit how long a benchmark runs, where + // `--benchmark_min_time=N` or `MinTime(...)` should be used instead. + Benchmark* Iterations(size_t n); + + // Specify the amount of times to repeat this benchmark. This option overrides + // the `benchmark_repetitions` flag. + // REQUIRES: `n > 0` + Benchmark* Repetitions(int n); + + // Specify if each repetition of the benchmark should be reported separately + // or if only the final statistics should be reported. If the benchmark + // is not repeated then the single result is always reported. + Benchmark* ReportAggregatesOnly(bool value = true); + + // If a particular benchmark is I/O bound, runs multiple threads internally or + // if for some reason CPU timings are not representative, call this method. If + // called, the elapsed time will be used to control how many iterations are + // run, and in the printing of items/second or MB/seconds values. If not + // called, the cpu time used by the benchmark will be used. + Benchmark* UseRealTime(); + + // If a benchmark must measure time manually (e.g. if GPU execution time is + // being + // measured), call this method. If called, each benchmark iteration should + // call + // SetIterationTime(seconds) to report the measured time, which will be used + // to control how many iterations are run, and in the printing of items/second + // or MB/second values. + Benchmark* UseManualTime(); + + // Set the asymptotic computational complexity for the benchmark. If called + // the asymptotic computational complexity will be shown on the output. + Benchmark* Complexity(BigO complexity = benchmark::oAuto); + + // Set the asymptotic computational complexity for the benchmark. If called + // the asymptotic computational complexity will be shown on the output. + Benchmark* Complexity(BigOFunc* complexity); + + // Support for running multiple copies of the same benchmark concurrently + // in multiple threads. This may be useful when measuring the scaling + // of some piece of code. + + // Run one instance of this benchmark concurrently in t threads. + Benchmark* Threads(int t); + + // Pick a set of values T from [min_threads,max_threads]. + // min_threads and max_threads are always included in T. Run this + // benchmark once for each value in T. The benchmark run for a + // particular value t consists of t threads running the benchmark + // function concurrently. For example, consider: + // BENCHMARK(Foo)->ThreadRange(1,16); + // This will run the following benchmarks: + // Foo in 1 thread + // Foo in 2 threads + // Foo in 4 threads + // Foo in 8 threads + // Foo in 16 threads + Benchmark* ThreadRange(int min_threads, int max_threads); + + // For each value n in the range, run this benchmark once using n threads. + // min_threads and max_threads are always included in the range. + // stride specifies the increment. E.g. DenseThreadRange(1, 8, 3) starts + // a benchmark with 1, 4, 7 and 8 threads. + Benchmark* DenseThreadRange(int min_threads, int max_threads, int stride = 1); + + // Equivalent to ThreadRange(NumCPUs(), NumCPUs()) + Benchmark* ThreadPerCpu(); + + virtual void Run(State& state) = 0; + + // Used inside the benchmark implementation + struct Instance; + + protected: + explicit Benchmark(const char* name); + Benchmark(Benchmark const&); + void SetName(const char* name); + + int ArgsCnt() const; + + static void AddRange(std::vector* dst, int lo, int hi, int mult); + + private: + friend class BenchmarkFamilies; + + std::string name_; + ReportMode report_mode_; + std::vector arg_names_; // Args for all benchmark runs + std::vector > args_; // Args for all benchmark runs + TimeUnit time_unit_; + int range_multiplier_; + double min_time_; + size_t iterations_; + int repetitions_; + bool use_real_time_; + bool use_manual_time_; + BigO complexity_; + BigOFunc* complexity_lambda_; + std::vector thread_counts_; + + Benchmark& operator=(Benchmark const&); +}; + +} // namespace internal + +// Create and register a benchmark with the specified 'name' that invokes +// the specified functor 'fn'. +// +// RETURNS: A pointer to the registered benchmark. +internal::Benchmark* RegisterBenchmark(const char* name, + internal::Function* fn); + +#if defined(BENCHMARK_HAS_CXX11) +template +internal::Benchmark* RegisterBenchmark(const char* name, Lambda&& fn); +#endif + +// Remove all registered benchmarks. All pointers to previously registered +// benchmarks are invalidated. +void ClearRegisteredBenchmarks(); + +namespace internal { +// The class used to hold all Benchmarks created from static function. +// (ie those created using the BENCHMARK(...) macros. +class FunctionBenchmark : public Benchmark { + public: + FunctionBenchmark(const char* name, Function* func) + : Benchmark(name), func_(func) {} + + virtual void Run(State& st); + + private: + Function* func_; +}; + +#ifdef BENCHMARK_HAS_CXX11 +template +class LambdaBenchmark : public Benchmark { + public: + virtual void Run(State& st) { lambda_(st); } + + private: + template + LambdaBenchmark(const char* name, OLambda&& lam) + : Benchmark(name), lambda_(std::forward(lam)) {} + + LambdaBenchmark(LambdaBenchmark const&) = delete; + + private: + template + friend Benchmark* ::benchmark::RegisterBenchmark(const char*, Lam&&); + + Lambda lambda_; +}; +#endif + +} // namespace internal + +inline internal::Benchmark* RegisterBenchmark(const char* name, + internal::Function* fn) { + return internal::RegisterBenchmarkInternal( + ::new internal::FunctionBenchmark(name, fn)); +} + +#ifdef BENCHMARK_HAS_CXX11 +template +internal::Benchmark* RegisterBenchmark(const char* name, Lambda&& fn) { + using BenchType = + internal::LambdaBenchmark::type>; + return internal::RegisterBenchmarkInternal( + ::new BenchType(name, std::forward(fn))); +} +#endif + +#if defined(BENCHMARK_HAS_CXX11) && \ + (!defined(BENCHMARK_GCC_VERSION) || BENCHMARK_GCC_VERSION >= 409) +template +internal::Benchmark* RegisterBenchmark(const char* name, Lambda&& fn, + Args&&... args) { + return benchmark::RegisterBenchmark( + name, [=](benchmark::State& st) { fn(st, args...); }); +} +#else +#define BENCHMARK_HAS_NO_VARIADIC_REGISTER_BENCHMARK +#endif + +// The base class for all fixture tests. +class Fixture : public internal::Benchmark { + public: + Fixture() : internal::Benchmark("") {} + + virtual void Run(State& st) { + this->SetUp(st); + this->BenchmarkCase(st); + this->TearDown(st); + } + + // These will be deprecated ... + virtual void SetUp(const State&) {} + virtual void TearDown(const State&) {} + // ... In favor of these. + virtual void SetUp(State& st) { SetUp(const_cast(st)); } + virtual void TearDown(State& st) { TearDown(const_cast(st)); } + + protected: + virtual void BenchmarkCase(State&) = 0; +}; + +} // namespace benchmark + +// ------------------------------------------------------ +// Macro to register benchmarks + +// Check that __COUNTER__ is defined and that __COUNTER__ increases by 1 +// every time it is expanded. X + 1 == X + 0 is used in case X is defined to be +// empty. If X is empty the expression becomes (+1 == +0). +#if defined(__COUNTER__) && (__COUNTER__ + 1 == __COUNTER__ + 0) +#define BENCHMARK_PRIVATE_UNIQUE_ID __COUNTER__ +#else +#define BENCHMARK_PRIVATE_UNIQUE_ID __LINE__ +#endif + +// Helpers for generating unique variable names +#define BENCHMARK_PRIVATE_NAME(n) \ + BENCHMARK_PRIVATE_CONCAT(_benchmark_, BENCHMARK_PRIVATE_UNIQUE_ID, n) +#define BENCHMARK_PRIVATE_CONCAT(a, b, c) BENCHMARK_PRIVATE_CONCAT2(a, b, c) +#define BENCHMARK_PRIVATE_CONCAT2(a, b, c) a##b##c + +#define BENCHMARK_PRIVATE_DECLARE(n) \ + static ::benchmark::internal::Benchmark* BENCHMARK_PRIVATE_NAME(n) \ + BENCHMARK_UNUSED + +#define BENCHMARK(n) \ + BENCHMARK_PRIVATE_DECLARE(n) = \ + (::benchmark::internal::RegisterBenchmarkInternal( \ + new ::benchmark::internal::FunctionBenchmark(#n, n))) + +// Old-style macros +#define BENCHMARK_WITH_ARG(n, a) BENCHMARK(n)->Arg((a)) +#define BENCHMARK_WITH_ARG2(n, a1, a2) BENCHMARK(n)->Args({(a1), (a2)}) +#define BENCHMARK_WITH_UNIT(n, t) BENCHMARK(n)->Unit((t)) +#define BENCHMARK_RANGE(n, lo, hi) BENCHMARK(n)->Range((lo), (hi)) +#define BENCHMARK_RANGE2(n, l1, h1, l2, h2) \ + BENCHMARK(n)->RangePair({{(l1), (h1)}, {(l2), (h2)}}) + +#if __cplusplus >= 201103L + +// Register a benchmark which invokes the function specified by `func` +// with the additional arguments specified by `...`. +// +// For example: +// +// template ` +// void BM_takes_args(benchmark::State& state, ExtraArgs&&... extra_args) { +// [...] +//} +// /* Registers a benchmark named "BM_takes_args/int_string_test` */ +// BENCHMARK_CAPTURE(BM_takes_args, int_string_test, 42, std::string("abc")); +#define BENCHMARK_CAPTURE(func, test_case_name, ...) \ + BENCHMARK_PRIVATE_DECLARE(func) = \ + (::benchmark::internal::RegisterBenchmarkInternal( \ + new ::benchmark::internal::FunctionBenchmark( \ + #func "/" #test_case_name, \ + [](::benchmark::State& st) { func(st, __VA_ARGS__); }))) + +#endif // __cplusplus >= 11 + +// This will register a benchmark for a templatized function. For example: +// +// template +// void BM_Foo(int iters); +// +// BENCHMARK_TEMPLATE(BM_Foo, 1); +// +// will register BM_Foo<1> as a benchmark. +#define BENCHMARK_TEMPLATE1(n, a) \ + BENCHMARK_PRIVATE_DECLARE(n) = \ + (::benchmark::internal::RegisterBenchmarkInternal( \ + new ::benchmark::internal::FunctionBenchmark(#n "<" #a ">", n))) + +#define BENCHMARK_TEMPLATE2(n, a, b) \ + BENCHMARK_PRIVATE_DECLARE(n) = \ + (::benchmark::internal::RegisterBenchmarkInternal( \ + new ::benchmark::internal::FunctionBenchmark(#n "<" #a "," #b ">", \ + n))) + +#if __cplusplus >= 201103L +#define BENCHMARK_TEMPLATE(n, ...) \ + BENCHMARK_PRIVATE_DECLARE(n) = \ + (::benchmark::internal::RegisterBenchmarkInternal( \ + new ::benchmark::internal::FunctionBenchmark( \ + #n "<" #__VA_ARGS__ ">", n<__VA_ARGS__>))) +#else +#define BENCHMARK_TEMPLATE(n, a) BENCHMARK_TEMPLATE1(n, a) +#endif + +#define BENCHMARK_PRIVATE_DECLARE_F(BaseClass, Method) \ + class BaseClass##_##Method##_Benchmark : public BaseClass { \ + public: \ + BaseClass##_##Method##_Benchmark() : BaseClass() { \ + this->SetName(#BaseClass "/" #Method); \ + } \ + \ + protected: \ + virtual void BenchmarkCase(::benchmark::State&); \ + }; + +#define BENCHMARK_DEFINE_F(BaseClass, Method) \ + BENCHMARK_PRIVATE_DECLARE_F(BaseClass, Method) \ + void BaseClass##_##Method##_Benchmark::BenchmarkCase + +#define BENCHMARK_REGISTER_F(BaseClass, Method) \ + BENCHMARK_PRIVATE_REGISTER_F(BaseClass##_##Method##_Benchmark) + +#define BENCHMARK_PRIVATE_REGISTER_F(TestName) \ + BENCHMARK_PRIVATE_DECLARE(TestName) = \ + (::benchmark::internal::RegisterBenchmarkInternal(new TestName())) + +// This macro will define and register a benchmark within a fixture class. +#define BENCHMARK_F(BaseClass, Method) \ + BENCHMARK_PRIVATE_DECLARE_F(BaseClass, Method) \ + BENCHMARK_REGISTER_F(BaseClass, Method); \ + void BaseClass##_##Method##_Benchmark::BenchmarkCase + +// Helper macro to create a main routine in a test that runs the benchmarks +#define BENCHMARK_MAIN() \ + int main(int argc, char** argv) { \ + ::benchmark::Initialize(&argc, argv); \ + if (::benchmark::ReportUnrecognizedArguments(argc, argv)) return 1; \ + ::benchmark::RunSpecifiedBenchmarks(); \ + } + + +// ------------------------------------------------------ +// Benchmark Reporters + +namespace benchmark { + +// Interface for custom benchmark result printers. +// By default, benchmark reports are printed to stdout. However an application +// can control the destination of the reports by calling +// RunSpecifiedBenchmarks and passing it a custom reporter object. +// The reporter object must implement the following interface. +class BenchmarkReporter { + public: + struct Context { + int num_cpus; + double mhz_per_cpu; + bool cpu_scaling_enabled; + + // The number of chars in the longest benchmark name. + size_t name_field_width; + }; + + struct Run { + Run() + : error_occurred(false), + iterations(1), + time_unit(kNanosecond), + real_accumulated_time(0), + cpu_accumulated_time(0), + bytes_per_second(0), + items_per_second(0), + max_heapbytes_used(0), + complexity(oNone), + complexity_lambda(), + complexity_n(0), + report_big_o(false), + report_rms(false), + counters() {} + + std::string benchmark_name; + std::string report_label; // Empty if not set by benchmark. + bool error_occurred; + std::string error_message; + + int64_t iterations; + TimeUnit time_unit; + double real_accumulated_time; + double cpu_accumulated_time; + + // Return a value representing the real time per iteration in the unit + // specified by 'time_unit'. + // NOTE: If 'iterations' is zero the returned value represents the + // accumulated time. + double GetAdjustedRealTime() const; + + // Return a value representing the cpu time per iteration in the unit + // specified by 'time_unit'. + // NOTE: If 'iterations' is zero the returned value represents the + // accumulated time. + double GetAdjustedCPUTime() const; + + // Zero if not set by benchmark. + double bytes_per_second; + double items_per_second; + + // This is set to 0.0 if memory tracing is not enabled. + double max_heapbytes_used; + + // Keep track of arguments to compute asymptotic complexity + BigO complexity; + BigOFunc* complexity_lambda; + int complexity_n; + + // Inform print function whether the current run is a complexity report + bool report_big_o; + bool report_rms; + + UserCounters counters; + }; + + // Construct a BenchmarkReporter with the output stream set to 'std::cout' + // and the error stream set to 'std::cerr' + BenchmarkReporter(); + + // Called once for every suite of benchmarks run. + // The parameter "context" contains information that the + // reporter may wish to use when generating its report, for example the + // platform under which the benchmarks are running. The benchmark run is + // never started if this function returns false, allowing the reporter + // to skip runs based on the context information. + virtual bool ReportContext(const Context& context) = 0; + + // Called once for each group of benchmark runs, gives information about + // cpu-time and heap memory usage during the benchmark run. If the group + // of runs contained more than two entries then 'report' contains additional + // elements representing the mean and standard deviation of those runs. + // Additionally if this group of runs was the last in a family of benchmarks + // 'reports' contains additional entries representing the asymptotic + // complexity and RMS of that benchmark family. + virtual void ReportRuns(const std::vector& report) = 0; + + // Called once and only once after ever group of benchmarks is run and + // reported. + virtual void Finalize() {} + + // REQUIRES: The object referenced by 'out' is valid for the lifetime + // of the reporter. + void SetOutputStream(std::ostream* out) { + assert(out); + output_stream_ = out; + } + + // REQUIRES: The object referenced by 'err' is valid for the lifetime + // of the reporter. + void SetErrorStream(std::ostream* err) { + assert(err); + error_stream_ = err; + } + + std::ostream& GetOutputStream() const { return *output_stream_; } + + std::ostream& GetErrorStream() const { return *error_stream_; } + + virtual ~BenchmarkReporter(); + + // Write a human readable string to 'out' representing the specified + // 'context'. + // REQUIRES: 'out' is non-null. + static void PrintBasicContext(std::ostream* out, Context const& context); + + private: + std::ostream* output_stream_; + std::ostream* error_stream_; +}; + +// Simple reporter that outputs benchmark data to the console. This is the +// default reporter used by RunSpecifiedBenchmarks(). +class ConsoleReporter : public BenchmarkReporter { +public: + enum OutputOptions { + OO_None = 0, + OO_Color = 1, + OO_Tabular = 2, + OO_ColorTabular = OO_Color|OO_Tabular, + OO_Defaults = OO_ColorTabular + }; + explicit ConsoleReporter(OutputOptions opts_ = OO_Defaults) + : output_options_(opts_), name_field_width_(0), + prev_counters_(), printed_header_(false) {} + + virtual bool ReportContext(const Context& context); + virtual void ReportRuns(const std::vector& reports); + + protected: + virtual void PrintRunData(const Run& report); + virtual void PrintHeader(const Run& report); + + OutputOptions output_options_; + size_t name_field_width_; + UserCounters prev_counters_; + bool printed_header_; +}; + +class JSONReporter : public BenchmarkReporter { + public: + JSONReporter() : first_report_(true) {} + virtual bool ReportContext(const Context& context); + virtual void ReportRuns(const std::vector& reports); + virtual void Finalize(); + + private: + void PrintRunData(const Run& report); + + bool first_report_; +}; + +class CSVReporter : public BenchmarkReporter { + public: + CSVReporter() : printed_header_(false) {} + virtual bool ReportContext(const Context& context); + virtual void ReportRuns(const std::vector& reports); + + private: + void PrintRunData(const Run& report); + + bool printed_header_; + std::set< std::string > user_counter_names_; +}; + +inline const char* GetTimeUnitString(TimeUnit unit) { + switch (unit) { + case kMillisecond: + return "ms"; + case kMicrosecond: + return "us"; + case kNanosecond: + default: + return "ns"; + } +} + +inline double GetTimeUnitMultiplier(TimeUnit unit) { + switch (unit) { + case kMillisecond: + return 1e3; + case kMicrosecond: + return 1e6; + case kNanosecond: + default: + return 1e9; + } +} + +} // namespace benchmark + +#endif // BENCHMARK_BENCHMARK_H_ diff --git a/include/benchmark/benchmark_api.h b/include/benchmark/benchmark_api.h new file mode 100644 index 0000000..a9ae671 --- /dev/null +++ b/include/benchmark/benchmark_api.h @@ -0,0 +1,27 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +#ifndef BENCHMARK_BENCHMARK_API_H_ +#define BENCHMARK_BENCHMARK_API_H_ + +#ifdef __DEPRECATED +# ifndef BENCHMARK_WARNING_MSG +# warning the benchmark_api.h header has been deprecated and will be removed, please include benchmark.h instead +# else + BENCHMARK_WARNING_MSG("the benchmark_api.h header has been deprecated and will be removed, please include benchmark.h instead") +# endif +#endif + +#include "benchmark.h" // For forward declaration of BenchmarkReporter + +#endif // BENCHMARK_BENCHMARK_API_H_ diff --git a/include/benchmark/reporter.h b/include/benchmark/reporter.h new file mode 100644 index 0000000..5baca1a --- /dev/null +++ b/include/benchmark/reporter.h @@ -0,0 +1,27 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +#ifndef BENCHMARK_REPORTER_H_ +#define BENCHMARK_REPORTER_H_ + +#ifdef __DEPRECATED +# ifndef BENCHMARK_WARNING_MSG +# warning the reporter.h header has been deprecated and will be removed, please include benchmark.h instead +# else + BENCHMARK_WARNING_MSG("the reporter.h header has been deprecated and will be removed, please include benchmark.h instead") +# endif +#endif + +#include "benchmark.h" // For forward declaration of BenchmarkReporter + +#endif // BENCHMARK_REPORTER_H_ diff --git a/mingw.py b/mingw.py new file mode 100644 index 0000000..706ad55 --- /dev/null +++ b/mingw.py @@ -0,0 +1,320 @@ +#! /usr/bin/env python +# encoding: utf-8 + +import argparse +import errno +import logging +import os +import platform +import re +import sys +import subprocess +import tempfile + +try: + import winreg +except ImportError: + import _winreg as winreg +try: + import urllib.request as request +except ImportError: + import urllib as request +try: + import urllib.parse as parse +except ImportError: + import urlparse as parse + +class EmptyLogger(object): + ''' + Provides an implementation that performs no logging + ''' + def debug(self, *k, **kw): + pass + def info(self, *k, **kw): + pass + def warn(self, *k, **kw): + pass + def error(self, *k, **kw): + pass + def critical(self, *k, **kw): + pass + def setLevel(self, *k, **kw): + pass + +urls = ( + 'http://downloads.sourceforge.net/project/mingw-w64/Toolchains%20' + 'targetting%20Win32/Personal%20Builds/mingw-builds/installer/' + 'repository.txt', + 'http://downloads.sourceforge.net/project/mingwbuilds/host-windows/' + 'repository.txt' +) +''' +A list of mingw-build repositories +''' + +def repository(urls = urls, log = EmptyLogger()): + ''' + Downloads and parse mingw-build repository files and parses them + ''' + log.info('getting mingw-builds repository') + versions = {} + re_sourceforge = re.compile(r'http://sourceforge.net/projects/([^/]+)/files') + re_sub = r'http://downloads.sourceforge.net/project/\1' + for url in urls: + log.debug(' - requesting: %s', url) + socket = request.urlopen(url) + repo = socket.read() + if not isinstance(repo, str): + repo = repo.decode(); + socket.close() + for entry in repo.split('\n')[:-1]: + value = entry.split('|') + version = tuple([int(n) for n in value[0].strip().split('.')]) + version = versions.setdefault(version, {}) + arch = value[1].strip() + if arch == 'x32': + arch = 'i686' + elif arch == 'x64': + arch = 'x86_64' + arch = version.setdefault(arch, {}) + threading = arch.setdefault(value[2].strip(), {}) + exceptions = threading.setdefault(value[3].strip(), {}) + revision = exceptions.setdefault(int(value[4].strip()[3:]), + re_sourceforge.sub(re_sub, value[5].strip())) + return versions + +def find_in_path(file, path=None): + ''' + Attempts to find an executable in the path + ''' + if platform.system() == 'Windows': + file += '.exe' + if path is None: + path = os.environ.get('PATH', '') + if type(path) is type(''): + path = path.split(os.pathsep) + return list(filter(os.path.exists, + map(lambda dir, file=file: os.path.join(dir, file), path))) + +def find_7zip(log = EmptyLogger()): + ''' + Attempts to find 7zip for unpacking the mingw-build archives + ''' + log.info('finding 7zip') + path = find_in_path('7z') + if not path: + key = winreg.OpenKey(winreg.HKEY_LOCAL_MACHINE, r'SOFTWARE\7-Zip') + path, _ = winreg.QueryValueEx(key, 'Path') + path = [os.path.join(path, '7z.exe')] + log.debug('found \'%s\'', path[0]) + return path[0] + +find_7zip() + +def unpack(archive, location, log = EmptyLogger()): + ''' + Unpacks a mingw-builds archive + ''' + sevenzip = find_7zip(log) + log.info('unpacking %s', os.path.basename(archive)) + cmd = [sevenzip, 'x', archive, '-o' + location, '-y'] + log.debug(' - %r', cmd) + with open(os.devnull, 'w') as devnull: + subprocess.check_call(cmd, stdout = devnull) + +def download(url, location, log = EmptyLogger()): + ''' + Downloads and unpacks a mingw-builds archive + ''' + log.info('downloading MinGW') + log.debug(' - url: %s', url) + log.debug(' - location: %s', location) + + re_content = re.compile(r'attachment;[ \t]*filename=(")?([^"]*)(")?[\r\n]*') + + stream = request.urlopen(url) + try: + content = stream.getheader('Content-Disposition') or '' + except AttributeError: + content = stream.headers.getheader('Content-Disposition') or '' + matches = re_content.match(content) + if matches: + filename = matches.group(2) + else: + parsed = parse.urlparse(stream.geturl()) + filename = os.path.basename(parsed.path) + + try: + os.makedirs(location) + except OSError as e: + if e.errno == errno.EEXIST and os.path.isdir(location): + pass + else: + raise + + archive = os.path.join(location, filename) + with open(archive, 'wb') as out: + while True: + buf = stream.read(1024) + if not buf: + break + out.write(buf) + unpack(archive, location, log = log) + os.remove(archive) + + possible = os.path.join(location, 'mingw64') + if not os.path.exists(possible): + possible = os.path.join(location, 'mingw32') + if not os.path.exists(possible): + raise ValueError('Failed to find unpacked MinGW: ' + possible) + return possible + +def root(location = None, arch = None, version = None, threading = None, + exceptions = None, revision = None, log = EmptyLogger()): + ''' + Returns the root folder of a specific version of the mingw-builds variant + of gcc. Will download the compiler if needed + ''' + + # Get the repository if we don't have all the information + if not (arch and version and threading and exceptions and revision): + versions = repository(log = log) + + # Determine some defaults + version = version or max(versions.keys()) + if not arch: + arch = platform.machine().lower() + if arch == 'x86': + arch = 'i686' + elif arch == 'amd64': + arch = 'x86_64' + if not threading: + keys = versions[version][arch].keys() + if 'posix' in keys: + threading = 'posix' + elif 'win32' in keys: + threading = 'win32' + else: + threading = keys[0] + if not exceptions: + keys = versions[version][arch][threading].keys() + if 'seh' in keys: + exceptions = 'seh' + elif 'sjlj' in keys: + exceptions = 'sjlj' + else: + exceptions = keys[0] + if revision == None: + revision = max(versions[version][arch][threading][exceptions].keys()) + if not location: + location = os.path.join(tempfile.gettempdir(), 'mingw-builds') + + # Get the download url + url = versions[version][arch][threading][exceptions][revision] + + # Tell the user whatzzup + log.info('finding MinGW %s', '.'.join(str(v) for v in version)) + log.debug(' - arch: %s', arch) + log.debug(' - threading: %s', threading) + log.debug(' - exceptions: %s', exceptions) + log.debug(' - revision: %s', revision) + log.debug(' - url: %s', url) + + # Store each specific revision differently + slug = '{version}-{arch}-{threading}-{exceptions}-rev{revision}' + slug = slug.format( + version = '.'.join(str(v) for v in version), + arch = arch, + threading = threading, + exceptions = exceptions, + revision = revision + ) + if arch == 'x86_64': + root_dir = os.path.join(location, slug, 'mingw64') + elif arch == 'i686': + root_dir = os.path.join(location, slug, 'mingw32') + else: + raise ValueError('Unknown MinGW arch: ' + arch) + + # Download if needed + if not os.path.exists(root_dir): + downloaded = download(url, os.path.join(location, slug), log = log) + if downloaded != root_dir: + raise ValueError('The location of mingw did not match\n%s\n%s' + % (downloaded, root_dir)) + + return root_dir + +def str2ver(string): + ''' + Converts a version string into a tuple + ''' + try: + version = tuple(int(v) for v in string.split('.')) + if len(version) is not 3: + raise ValueError() + except ValueError: + raise argparse.ArgumentTypeError( + 'please provide a three digit version string') + return version + +def main(): + ''' + Invoked when the script is run directly by the python interpreter + ''' + parser = argparse.ArgumentParser( + description = 'Downloads a specific version of MinGW', + formatter_class = argparse.ArgumentDefaultsHelpFormatter + ) + parser.add_argument('--location', + help = 'the location to download the compiler to', + default = os.path.join(tempfile.gettempdir(), 'mingw-builds')) + parser.add_argument('--arch', required = True, choices = ['i686', 'x86_64'], + help = 'the target MinGW architecture string') + parser.add_argument('--version', type = str2ver, + help = 'the version of GCC to download') + parser.add_argument('--threading', choices = ['posix', 'win32'], + help = 'the threading type of the compiler') + parser.add_argument('--exceptions', choices = ['sjlj', 'seh', 'dwarf'], + help = 'the method to throw exceptions') + parser.add_argument('--revision', type=int, + help = 'the revision of the MinGW release') + group = parser.add_mutually_exclusive_group() + group.add_argument('-v', '--verbose', action='store_true', + help='increase the script output verbosity') + group.add_argument('-q', '--quiet', action='store_true', + help='only print errors and warning') + args = parser.parse_args() + + # Create the logger + logger = logging.getLogger('mingw') + handler = logging.StreamHandler() + formatter = logging.Formatter('%(message)s') + handler.setFormatter(formatter) + logger.addHandler(handler) + logger.setLevel(logging.INFO) + if args.quiet: + logger.setLevel(logging.WARN) + if args.verbose: + logger.setLevel(logging.DEBUG) + + # Get MinGW + root_dir = root(location = args.location, arch = args.arch, + version = args.version, threading = args.threading, + exceptions = args.exceptions, revision = args.revision, + log = logger) + + sys.stdout.write('%s\n' % os.path.join(root_dir, 'bin')) + +if __name__ == '__main__': + try: + main() + except IOError as e: + sys.stderr.write('IO error: %s\n' % e) + sys.exit(1) + except OSError as e: + sys.stderr.write('OS error: %s\n' % e) + sys.exit(1) + except KeyboardInterrupt as e: + sys.stderr.write('Killed\n') + sys.exit(1) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt new file mode 100644 index 0000000..244484b --- /dev/null +++ b/src/CMakeLists.txt @@ -0,0 +1,78 @@ +# Allow the source files to find headers in src/ +include_directories(${PROJECT_SOURCE_DIR}/src) + +if (DEFINED BENCHMARK_CXX_LINKER_FLAGS) + list(APPEND CMAKE_SHARED_LINKER_FLAGS ${BENCHMARK_CXX_LINKER_FLAGS}) + list(APPEND CMAKE_MODULE_LINKER_FLAGS ${BENCHMARK_CXX_LINKER_FLAGS}) +endif() + +file(GLOB + SOURCE_FILES + *.cc + ${PROJECT_SOURCE_DIR}/include/benchmark/*.h + ${CMAKE_CURRENT_SOURCE_DIR}/*.h) + +add_library(benchmark ${SOURCE_FILES}) +set_target_properties(benchmark PROPERTIES + OUTPUT_NAME "benchmark" + VERSION ${GENERIC_LIB_VERSION} + SOVERSION ${GENERIC_LIB_SOVERSION} +) +target_include_directories(benchmark PUBLIC + $ + ) + +# Link threads. +target_link_libraries(benchmark ${BENCHMARK_CXX_LIBRARIES} ${CMAKE_THREAD_LIBS_INIT}) +find_library(LIBRT rt) +if(LIBRT) + target_link_libraries(benchmark ${LIBRT}) +endif() + +# We need extra libraries on Windows +if(${CMAKE_SYSTEM_NAME} MATCHES "Windows") + target_link_libraries(benchmark Shlwapi) +endif() + +set(include_install_dir "include") +set(lib_install_dir "lib/") +set(bin_install_dir "bin/") +set(config_install_dir "lib/cmake/${PROJECT_NAME}") + +set(generated_dir "${CMAKE_CURRENT_BINARY_DIR}/generated") + +set(version_config "${generated_dir}/${PROJECT_NAME}ConfigVersion.cmake") +set(project_config "${generated_dir}/${PROJECT_NAME}Config.cmake") +set(targets_export_name "${PROJECT_NAME}Targets") + +set(namespace "${PROJECT_NAME}::") + +include(CMakePackageConfigHelpers) +write_basic_package_version_file( + "${version_config}" VERSION ${GIT_VERSION} COMPATIBILITY SameMajorVersion +) + +configure_file("${PROJECT_SOURCE_DIR}/cmake/Config.cmake.in" "${project_config}" @ONLY) + +# Install target (will install the library to specified CMAKE_INSTALL_PREFIX variable) +install( + TARGETS benchmark + EXPORT ${targets_export_name} + ARCHIVE DESTINATION ${lib_install_dir} + LIBRARY DESTINATION ${lib_install_dir} + RUNTIME DESTINATION ${bin_install_dir} + INCLUDES DESTINATION ${include_install_dir}) + +install( + DIRECTORY "${PROJECT_SOURCE_DIR}/include/benchmark" + DESTINATION ${include_install_dir} + FILES_MATCHING PATTERN "*.*h") + +install( + FILES "${project_config}" "${version_config}" + DESTINATION "${config_install_dir}") + +install( + EXPORT "${targets_export_name}" + NAMESPACE "${namespace}" + DESTINATION "${config_install_dir}") diff --git a/src/arraysize.h b/src/arraysize.h new file mode 100644 index 0000000..51a50f2 --- /dev/null +++ b/src/arraysize.h @@ -0,0 +1,33 @@ +#ifndef BENCHMARK_ARRAYSIZE_H_ +#define BENCHMARK_ARRAYSIZE_H_ + +#include "internal_macros.h" + +namespace benchmark { +namespace internal { +// The arraysize(arr) macro returns the # of elements in an array arr. +// The expression is a compile-time constant, and therefore can be +// used in defining new arrays, for example. If you use arraysize on +// a pointer by mistake, you will get a compile-time error. +// + +// This template function declaration is used in defining arraysize. +// Note that the function doesn't need an implementation, as we only +// use its type. +template +char (&ArraySizeHelper(T (&array)[N]))[N]; + +// That gcc wants both of these prototypes seems mysterious. VC, for +// its part, can't decide which to use (another mystery). Matching of +// template overloads: the final frontier. +#ifndef COMPILER_MSVC +template +char (&ArraySizeHelper(const T (&array)[N]))[N]; +#endif + +#define arraysize(array) (sizeof(::benchmark::internal::ArraySizeHelper(array))) + +} // end namespace internal +} // end namespace benchmark + +#endif // BENCHMARK_ARRAYSIZE_H_ diff --git a/src/benchmark.cc b/src/benchmark.cc new file mode 100644 index 0000000..1ba0a50 --- /dev/null +++ b/src/benchmark.cc @@ -0,0 +1,715 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "benchmark/benchmark.h" +#include "benchmark_api_internal.h" +#include "internal_macros.h" + +#ifndef BENCHMARK_OS_WINDOWS +#include +#include +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "check.h" +#include "colorprint.h" +#include "commandlineflags.h" +#include "complexity.h" +#include "counter.h" +#include "log.h" +#include "mutex.h" +#include "re.h" +#include "stat.h" +#include "string_util.h" +#include "sysinfo.h" +#include "timers.h" + +DEFINE_bool(benchmark_list_tests, false, + "Print a list of benchmarks. This option overrides all other " + "options."); + +DEFINE_string(benchmark_filter, ".", + "A regular expression that specifies the set of benchmarks " + "to execute. If this flag is empty, no benchmarks are run. " + "If this flag is the string \"all\", all benchmarks linked " + "into the process are run."); + +DEFINE_double(benchmark_min_time, 0.5, + "Minimum number of seconds we should run benchmark before " + "results are considered significant. For cpu-time based " + "tests, this is the lower bound on the total cpu time " + "used by all threads that make up the test. For real-time " + "based tests, this is the lower bound on the elapsed time " + "of the benchmark execution, regardless of number of " + "threads."); + +DEFINE_int32(benchmark_repetitions, 1, + "The number of runs of each benchmark. If greater than 1, the " + "mean and standard deviation of the runs will be reported."); + +DEFINE_bool(benchmark_report_aggregates_only, false, + "Report the result of each benchmark repetitions. When 'true' is " + "specified only the mean, standard deviation, and other statistics " + "are reported for repeated benchmarks."); + +DEFINE_string(benchmark_format, "console", + "The format to use for console output. Valid values are " + "'console', 'json', or 'csv'."); + +DEFINE_string(benchmark_out_format, "json", + "The format to use for file output. Valid values are " + "'console', 'json', or 'csv'."); + +DEFINE_string(benchmark_out, "", "The file to write additonal output to"); + +DEFINE_string(benchmark_color, "auto", + "Whether to use colors in the output. Valid values: " + "'true'/'yes'/1, 'false'/'no'/0, and 'auto'. 'auto' means to use " + "colors if the output is being sent to a terminal and the TERM " + "environment variable is set to a terminal type that supports " + "colors."); + +DEFINE_bool(benchmark_counters_tabular, false, + "Whether to use tabular format when printing user counters to " + "the console. Valid values: 'true'/'yes'/1, 'false'/'no'/0." + "Defaults to false."); + +DEFINE_int32(v, 0, "The level of verbose logging to output"); + +namespace benchmark { +namespace internal { + +void UseCharPointer(char const volatile*) {} + +} // end namespace internal + +namespace { + +static const size_t kMaxIterations = 1000000000; + +} // end namespace + +namespace internal { + +class ThreadManager { + public: + ThreadManager(int num_threads) + : alive_threads_(num_threads), start_stop_barrier_(num_threads) {} + + Mutex& GetBenchmarkMutex() const RETURN_CAPABILITY(benchmark_mutex_) { + return benchmark_mutex_; + } + + bool StartStopBarrier() EXCLUDES(end_cond_mutex_) { + return start_stop_barrier_.wait(); + } + + void NotifyThreadComplete() EXCLUDES(end_cond_mutex_) { + start_stop_barrier_.removeThread(); + if (--alive_threads_ == 0) { + MutexLock lock(end_cond_mutex_); + end_condition_.notify_all(); + } + } + + void WaitForAllThreads() EXCLUDES(end_cond_mutex_) { + MutexLock lock(end_cond_mutex_); + end_condition_.wait(lock.native_handle(), + [this]() { return alive_threads_ == 0; }); + } + + public: + struct Result { + double real_time_used = 0; + double cpu_time_used = 0; + double manual_time_used = 0; + int64_t bytes_processed = 0; + int64_t items_processed = 0; + int complexity_n = 0; + std::string report_label_; + std::string error_message_; + bool has_error_ = false; + UserCounters counters; + }; + GUARDED_BY(GetBenchmarkMutex()) Result results; + + private: + mutable Mutex benchmark_mutex_; + std::atomic alive_threads_; + Barrier start_stop_barrier_; + Mutex end_cond_mutex_; + Condition end_condition_; +}; + +// Timer management class +class ThreadTimer { + public: + ThreadTimer() = default; + + // Called by each thread + void StartTimer() { + running_ = true; + start_real_time_ = ChronoClockNow(); + start_cpu_time_ = ThreadCPUUsage(); + } + + // Called by each thread + void StopTimer() { + CHECK(running_); + running_ = false; + real_time_used_ += ChronoClockNow() - start_real_time_; + cpu_time_used_ += ThreadCPUUsage() - start_cpu_time_; + } + + // Called by each thread + void SetIterationTime(double seconds) { manual_time_used_ += seconds; } + + bool running() const { return running_; } + + // REQUIRES: timer is not running + double real_time_used() { + CHECK(!running_); + return real_time_used_; + } + + // REQUIRES: timer is not running + double cpu_time_used() { + CHECK(!running_); + return cpu_time_used_; + } + + // REQUIRES: timer is not running + double manual_time_used() { + CHECK(!running_); + return manual_time_used_; + } + + private: + bool running_ = false; // Is the timer running + double start_real_time_ = 0; // If running_ + double start_cpu_time_ = 0; // If running_ + + // Accumulated time so far (does not contain current slice if running_) + double real_time_used_ = 0; + double cpu_time_used_ = 0; + // Manually set iteration time. User sets this with SetIterationTime(seconds). + double manual_time_used_ = 0; +}; + +namespace { + +BenchmarkReporter::Run CreateRunReport( + const benchmark::internal::Benchmark::Instance& b, + const internal::ThreadManager::Result& results, size_t iters, + double seconds) { + // Create report about this benchmark run. + BenchmarkReporter::Run report; + + report.benchmark_name = b.name; + report.error_occurred = results.has_error_; + report.error_message = results.error_message_; + report.report_label = results.report_label_; + // Report the total iterations across all threads. + report.iterations = static_cast(iters) * b.threads; + report.time_unit = b.time_unit; + + if (!report.error_occurred) { + double bytes_per_second = 0; + if (results.bytes_processed > 0 && seconds > 0.0) { + bytes_per_second = (results.bytes_processed / seconds); + } + double items_per_second = 0; + if (results.items_processed > 0 && seconds > 0.0) { + items_per_second = (results.items_processed / seconds); + } + + if (b.use_manual_time) { + report.real_accumulated_time = results.manual_time_used; + } else { + report.real_accumulated_time = results.real_time_used; + } + report.cpu_accumulated_time = results.cpu_time_used; + report.bytes_per_second = bytes_per_second; + report.items_per_second = items_per_second; + report.complexity_n = results.complexity_n; + report.complexity = b.complexity; + report.complexity_lambda = b.complexity_lambda; + report.counters = results.counters; + internal::Finish(&report.counters, seconds, b.threads); + } + return report; +} + +// Execute one thread of benchmark b for the specified number of iterations. +// Adds the stats collected for the thread into *total. +void RunInThread(const benchmark::internal::Benchmark::Instance* b, + size_t iters, int thread_id, + internal::ThreadManager* manager) { + internal::ThreadTimer timer; + State st(iters, b->arg, thread_id, b->threads, &timer, manager); + b->benchmark->Run(st); + CHECK(st.iterations() == st.max_iterations) + << "Benchmark returned before State::KeepRunning() returned false!"; + { + MutexLock l(manager->GetBenchmarkMutex()); + internal::ThreadManager::Result& results = manager->results; + results.cpu_time_used += timer.cpu_time_used(); + results.real_time_used += timer.real_time_used(); + results.manual_time_used += timer.manual_time_used(); + results.bytes_processed += st.bytes_processed(); + results.items_processed += st.items_processed(); + results.complexity_n += st.complexity_length_n(); + internal::Increment(&results.counters, st.counters); + } + manager->NotifyThreadComplete(); +} + +std::vector RunBenchmark( + const benchmark::internal::Benchmark::Instance& b, + std::vector* complexity_reports) { + std::vector reports; // return value + + const bool has_explicit_iteration_count = b.iterations != 0; + size_t iters = has_explicit_iteration_count ? b.iterations : 1; + std::unique_ptr manager; + std::vector pool(b.threads - 1); + const int repeats = + b.repetitions != 0 ? b.repetitions : FLAGS_benchmark_repetitions; + const bool report_aggregates_only = + repeats != 1 && + (b.report_mode == internal::RM_Unspecified + ? FLAGS_benchmark_report_aggregates_only + : b.report_mode == internal::RM_ReportAggregatesOnly); + for (int repetition_num = 0; repetition_num < repeats; repetition_num++) { + for (;;) { + // Try benchmark + VLOG(2) << "Running " << b.name << " for " << iters << "\n"; + + manager.reset(new internal::ThreadManager(b.threads)); + for (std::size_t ti = 0; ti < pool.size(); ++ti) { + pool[ti] = std::thread(&RunInThread, &b, iters, + static_cast(ti + 1), manager.get()); + } + RunInThread(&b, iters, 0, manager.get()); + manager->WaitForAllThreads(); + for (std::thread& thread : pool) thread.join(); + internal::ThreadManager::Result results; + { + MutexLock l(manager->GetBenchmarkMutex()); + results = manager->results; + } + manager.reset(); + // Adjust real/manual time stats since they were reported per thread. + results.real_time_used /= b.threads; + results.manual_time_used /= b.threads; + + VLOG(2) << "Ran in " << results.cpu_time_used << "/" + << results.real_time_used << "\n"; + + // Base decisions off of real time if requested by this benchmark. + double seconds = results.cpu_time_used; + if (b.use_manual_time) { + seconds = results.manual_time_used; + } else if (b.use_real_time) { + seconds = results.real_time_used; + } + + const double min_time = + !IsZero(b.min_time) ? b.min_time : FLAGS_benchmark_min_time; + + // Determine if this run should be reported; Either it has + // run for a sufficient amount of time or because an error was reported. + const bool should_report = repetition_num > 0 + || has_explicit_iteration_count // An exact iteration count was requested + || results.has_error_ + || iters >= kMaxIterations + || seconds >= min_time // the elapsed time is large enough + // CPU time is specified but the elapsed real time greatly exceeds the + // minimum time. Note that user provided timers are except from this + // sanity check. + || ((results.real_time_used >= 5 * min_time) && !b.use_manual_time); + + if (should_report) { + BenchmarkReporter::Run report = + CreateRunReport(b, results, iters, seconds); + if (!report.error_occurred && b.complexity != oNone) + complexity_reports->push_back(report); + reports.push_back(report); + break; + } + + // See how much iterations should be increased by + // Note: Avoid division by zero with max(seconds, 1ns). + double multiplier = min_time * 1.4 / std::max(seconds, 1e-9); + // If our last run was at least 10% of FLAGS_benchmark_min_time then we + // use the multiplier directly. Otherwise we use at most 10 times + // expansion. + // NOTE: When the last run was at least 10% of the min time the max + // expansion should be 14x. + bool is_significant = (seconds / min_time) > 0.1; + multiplier = is_significant ? multiplier : std::min(10.0, multiplier); + if (multiplier <= 1.0) multiplier = 2.0; + double next_iters = std::max(multiplier * iters, iters + 1.0); + if (next_iters > kMaxIterations) { + next_iters = kMaxIterations; + } + VLOG(3) << "Next iters: " << next_iters << ", " << multiplier << "\n"; + iters = static_cast(next_iters + 0.5); + } + } + // Calculate additional statistics + auto stat_reports = ComputeStats(reports); + if ((b.complexity != oNone) && b.last_benchmark_instance) { + auto additional_run_stats = ComputeBigO(*complexity_reports); + stat_reports.insert(stat_reports.end(), additional_run_stats.begin(), + additional_run_stats.end()); + complexity_reports->clear(); + } + + if (report_aggregates_only) reports.clear(); + reports.insert(reports.end(), stat_reports.begin(), stat_reports.end()); + return reports; +} + +} // namespace +} // namespace internal + +State::State(size_t max_iters, const std::vector& ranges, int thread_i, + int n_threads, internal::ThreadTimer* timer, + internal::ThreadManager* manager) + : started_(false), + finished_(false), + total_iterations_(0), + range_(ranges), + bytes_processed_(0), + items_processed_(0), + complexity_n_(0), + error_occurred_(false), + counters(), + thread_index(thread_i), + threads(n_threads), + max_iterations(max_iters), + timer_(timer), + manager_(manager) { + CHECK(max_iterations != 0) << "At least one iteration must be run"; + CHECK_LT(thread_index, threads) << "thread_index must be less than threads"; +} + +void State::PauseTiming() { + // Add in time accumulated so far + CHECK(started_ && !finished_ && !error_occurred_); + timer_->StopTimer(); +} + +void State::ResumeTiming() { + CHECK(started_ && !finished_ && !error_occurred_); + timer_->StartTimer(); +} + +void State::SkipWithError(const char* msg) { + CHECK(msg); + error_occurred_ = true; + { + MutexLock l(manager_->GetBenchmarkMutex()); + if (manager_->results.has_error_ == false) { + manager_->results.error_message_ = msg; + manager_->results.has_error_ = true; + } + } + total_iterations_ = max_iterations; + if (timer_->running()) timer_->StopTimer(); +} + +void State::SetIterationTime(double seconds) { + timer_->SetIterationTime(seconds); +} + +void State::SetLabel(const char* label) { + MutexLock l(manager_->GetBenchmarkMutex()); + manager_->results.report_label_ = label; +} + +void State::StartKeepRunning() { + CHECK(!started_ && !finished_); + started_ = true; + manager_->StartStopBarrier(); + if (!error_occurred_) ResumeTiming(); +} + +void State::FinishKeepRunning() { + CHECK(started_ && (!finished_ || error_occurred_)); + if (!error_occurred_) { + PauseTiming(); + } + // Total iterations now is one greater than max iterations. Fix this. + total_iterations_ = max_iterations; + finished_ = true; + manager_->StartStopBarrier(); +} + +namespace internal { +namespace { + +void RunBenchmarks(const std::vector& benchmarks, + BenchmarkReporter* console_reporter, + BenchmarkReporter* file_reporter) { + // Note the file_reporter can be null. + CHECK(console_reporter != nullptr); + + // Determine the width of the name field using a minimum width of 10. + bool has_repetitions = FLAGS_benchmark_repetitions > 1; + size_t name_field_width = 10; + for (const Benchmark::Instance& benchmark : benchmarks) { + name_field_width = + std::max(name_field_width, benchmark.name.size()); + has_repetitions |= benchmark.repetitions > 1; + } + if (has_repetitions) name_field_width += std::strlen("_stddev"); + + // Print header here + BenchmarkReporter::Context context; + context.num_cpus = NumCPUs(); + context.mhz_per_cpu = CyclesPerSecond() / 1000000.0f; + + context.cpu_scaling_enabled = CpuScalingEnabled(); + context.name_field_width = name_field_width; + + // Keep track of runing times of all instances of current benchmark + std::vector complexity_reports; + + // We flush streams after invoking reporter methods that write to them. This + // ensures users get timely updates even when streams are not line-buffered. + auto flushStreams = [](BenchmarkReporter* reporter) { + if (!reporter) return; + std::flush(reporter->GetOutputStream()); + std::flush(reporter->GetErrorStream()); + }; + + if (console_reporter->ReportContext(context) && + (!file_reporter || file_reporter->ReportContext(context))) { + flushStreams(console_reporter); + flushStreams(file_reporter); + for (const auto& benchmark : benchmarks) { + std::vector reports = + RunBenchmark(benchmark, &complexity_reports); + console_reporter->ReportRuns(reports); + if (file_reporter) file_reporter->ReportRuns(reports); + flushStreams(console_reporter); + flushStreams(file_reporter); + } + } + console_reporter->Finalize(); + if (file_reporter) file_reporter->Finalize(); + flushStreams(console_reporter); + flushStreams(file_reporter); +} + +std::unique_ptr CreateReporter( + std::string const& name, ConsoleReporter::OutputOptions output_opts) { + typedef std::unique_ptr PtrType; + if (name == "console") { + return PtrType(new ConsoleReporter(output_opts)); + } else if (name == "json") { + return PtrType(new JSONReporter); + } else if (name == "csv") { + return PtrType(new CSVReporter); + } else { + std::cerr << "Unexpected format: '" << name << "'\n"; + std::exit(1); + } +} + +} // end namespace + +bool IsZero(double n) { + return std::abs(n) < std::numeric_limits::epsilon(); +} + +ConsoleReporter::OutputOptions GetOutputOptions(bool force_no_color) { + int output_opts = ConsoleReporter::OO_Defaults; + if ((FLAGS_benchmark_color == "auto" && IsColorTerminal()) || + IsTruthyFlagValue(FLAGS_benchmark_color)) { + output_opts |= ConsoleReporter::OO_Color; + } else { + output_opts &= ~ConsoleReporter::OO_Color; + } + if(force_no_color) { + output_opts &= ~ConsoleReporter::OO_Color; + } + if(FLAGS_benchmark_counters_tabular) { + output_opts |= ConsoleReporter::OO_Tabular; + } else { + output_opts &= ~ConsoleReporter::OO_Tabular; + } + return static_cast< ConsoleReporter::OutputOptions >(output_opts); +} + +} // end namespace internal + +size_t RunSpecifiedBenchmarks() { + return RunSpecifiedBenchmarks(nullptr, nullptr); +} + +size_t RunSpecifiedBenchmarks(BenchmarkReporter* console_reporter) { + return RunSpecifiedBenchmarks(console_reporter, nullptr); +} + +size_t RunSpecifiedBenchmarks(BenchmarkReporter* console_reporter, + BenchmarkReporter* file_reporter) { + std::string spec = FLAGS_benchmark_filter; + if (spec.empty() || spec == "all") + spec = "."; // Regexp that matches all benchmarks + + // Setup the reporters + std::ofstream output_file; + std::unique_ptr default_console_reporter; + std::unique_ptr default_file_reporter; + if (!console_reporter) { + default_console_reporter = internal::CreateReporter( + FLAGS_benchmark_format, internal::GetOutputOptions()); + console_reporter = default_console_reporter.get(); + } + auto& Out = console_reporter->GetOutputStream(); + auto& Err = console_reporter->GetErrorStream(); + + std::string const& fname = FLAGS_benchmark_out; + if (fname.empty() && file_reporter) { + Err << "A custom file reporter was provided but " + "--benchmark_out= was not specified." + << std::endl; + std::exit(1); + } + if (!fname.empty()) { + output_file.open(fname); + if (!output_file.is_open()) { + Err << "invalid file name: '" << fname << std::endl; + std::exit(1); + } + if (!file_reporter) { + default_file_reporter = internal::CreateReporter( + FLAGS_benchmark_out_format, ConsoleReporter::OO_None); + file_reporter = default_file_reporter.get(); + } + file_reporter->SetOutputStream(&output_file); + file_reporter->SetErrorStream(&output_file); + } + + std::vector benchmarks; + if (!FindBenchmarksInternal(spec, &benchmarks, &Err)) return 0; + + if (benchmarks.empty()) { + Err << "Failed to match any benchmarks against regex: " << spec << "\n"; + return 0; + } + + if (FLAGS_benchmark_list_tests) { + for (auto const& benchmark : benchmarks) Out << benchmark.name << "\n"; + } else { + internal::RunBenchmarks(benchmarks, console_reporter, file_reporter); + } + + return benchmarks.size(); +} + +namespace internal { + +void PrintUsageAndExit() { + fprintf(stdout, + "benchmark" + " [--benchmark_list_tests={true|false}]\n" + " [--benchmark_filter=]\n" + " [--benchmark_min_time=]\n" + " [--benchmark_repetitions=]\n" + " [--benchmark_report_aggregates_only={true|false}\n" + " [--benchmark_format=]\n" + " [--benchmark_out=]\n" + " [--benchmark_out_format=]\n" + " [--benchmark_color={auto|true|false}]\n" + " [--benchmark_counters_tabular={true|false}]\n" + " [--v=]\n"); + exit(0); +} + +void ParseCommandLineFlags(int* argc, char** argv) { + using namespace benchmark; + for (int i = 1; i < *argc; ++i) { + if (ParseBoolFlag(argv[i], "benchmark_list_tests", + &FLAGS_benchmark_list_tests) || + ParseStringFlag(argv[i], "benchmark_filter", &FLAGS_benchmark_filter) || + ParseDoubleFlag(argv[i], "benchmark_min_time", + &FLAGS_benchmark_min_time) || + ParseInt32Flag(argv[i], "benchmark_repetitions", + &FLAGS_benchmark_repetitions) || + ParseBoolFlag(argv[i], "benchmark_report_aggregates_only", + &FLAGS_benchmark_report_aggregates_only) || + ParseStringFlag(argv[i], "benchmark_format", &FLAGS_benchmark_format) || + ParseStringFlag(argv[i], "benchmark_out", &FLAGS_benchmark_out) || + ParseStringFlag(argv[i], "benchmark_out_format", + &FLAGS_benchmark_out_format) || + ParseStringFlag(argv[i], "benchmark_color", &FLAGS_benchmark_color) || + // "color_print" is the deprecated name for "benchmark_color". + // TODO: Remove this. + ParseStringFlag(argv[i], "color_print", &FLAGS_benchmark_color) || + ParseBoolFlag(argv[i], "benchmark_counters_tabular", + &FLAGS_benchmark_counters_tabular) || + ParseInt32Flag(argv[i], "v", &FLAGS_v)) { + for (int j = i; j != *argc - 1; ++j) argv[j] = argv[j + 1]; + + --(*argc); + --i; + } else if (IsFlag(argv[i], "help")) { + PrintUsageAndExit(); + } + } + for (auto const* flag : + {&FLAGS_benchmark_format, &FLAGS_benchmark_out_format}) + if (*flag != "console" && *flag != "json" && *flag != "csv") { + PrintUsageAndExit(); + } + if (FLAGS_benchmark_color.empty()) { + PrintUsageAndExit(); + } +} + +int InitializeStreams() { + static std::ios_base::Init init; + return 0; +} + +} // end namespace internal + +void Initialize(int* argc, char** argv) { + internal::ParseCommandLineFlags(argc, argv); + internal::LogLevel() = FLAGS_v; +} + +bool ReportUnrecognizedArguments(int argc, char** argv) { + for (int i = 1; i < argc; ++i) { + fprintf(stderr, "%s: error: unrecognized command-line flag: %s\n", argv[0], argv[i]); + } + return argc > 1; +} + +} // end namespace benchmark diff --git a/src/benchmark_api_internal.h b/src/benchmark_api_internal.h new file mode 100644 index 0000000..36d2340 --- /dev/null +++ b/src/benchmark_api_internal.h @@ -0,0 +1,46 @@ +#ifndef BENCHMARK_API_INTERNAL_H +#define BENCHMARK_API_INTERNAL_H + +#include "benchmark/benchmark.h" + +#include +#include +#include +#include +#include + +namespace benchmark { +namespace internal { + +// Information kept per benchmark we may want to run +struct Benchmark::Instance { + std::string name; + Benchmark* benchmark; + ReportMode report_mode; + std::vector arg; + TimeUnit time_unit; + int range_multiplier; + bool use_real_time; + bool use_manual_time; + BigO complexity; + BigOFunc* complexity_lambda; + UserCounters counters; + bool last_benchmark_instance; + int repetitions; + double min_time; + size_t iterations; + int threads; // Number of concurrent threads to us +}; + +bool FindBenchmarksInternal(const std::string& re, + std::vector* benchmarks, + std::ostream* Err); + +bool IsZero(double n); + +ConsoleReporter::OutputOptions GetOutputOptions(bool force_no_color = false); + +} // end namespace internal +} // end namespace benchmark + +#endif // BENCHMARK_API_INTERNAL_H diff --git a/src/benchmark_register.cc b/src/benchmark_register.cc new file mode 100644 index 0000000..ed70d82 --- /dev/null +++ b/src/benchmark_register.cc @@ -0,0 +1,467 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "benchmark/benchmark.h" +#include "benchmark_api_internal.h" +#include "internal_macros.h" + +#ifndef BENCHMARK_OS_WINDOWS +#include +#include +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "check.h" +#include "commandlineflags.h" +#include "complexity.h" +#include "log.h" +#include "mutex.h" +#include "re.h" +#include "stat.h" +#include "string_util.h" +#include "sysinfo.h" +#include "timers.h" + +namespace benchmark { + +namespace { +// For non-dense Range, intermediate values are powers of kRangeMultiplier. +static const int kRangeMultiplier = 8; +// The size of a benchmark family determines is the number of inputs to repeat +// the benchmark on. If this is "large" then warn the user during configuration. +static const size_t kMaxFamilySize = 100; +} // end namespace + +namespace internal { + +//=============================================================================// +// BenchmarkFamilies +//=============================================================================// + +// Class for managing registered benchmarks. Note that each registered +// benchmark identifies a family of related benchmarks to run. +class BenchmarkFamilies { + public: + static BenchmarkFamilies* GetInstance(); + + // Registers a benchmark family and returns the index assigned to it. + size_t AddBenchmark(std::unique_ptr family); + + // Clear all registered benchmark families. + void ClearBenchmarks(); + + // Extract the list of benchmark instances that match the specified + // regular expression. + bool FindBenchmarks(const std::string& re, + std::vector* benchmarks, + std::ostream* Err); + + private: + BenchmarkFamilies() {} + + std::vector> families_; + Mutex mutex_; +}; + +BenchmarkFamilies* BenchmarkFamilies::GetInstance() { + static BenchmarkFamilies instance; + return &instance; +} + +size_t BenchmarkFamilies::AddBenchmark(std::unique_ptr family) { + MutexLock l(mutex_); + size_t index = families_.size(); + families_.push_back(std::move(family)); + return index; +} + +void BenchmarkFamilies::ClearBenchmarks() { + MutexLock l(mutex_); + families_.clear(); + families_.shrink_to_fit(); +} + +bool BenchmarkFamilies::FindBenchmarks( + const std::string& spec, std::vector* benchmarks, + std::ostream* ErrStream) { + CHECK(ErrStream); + auto& Err = *ErrStream; + // Make regular expression out of command-line flag + std::string error_msg; + Regex re; + if (!re.Init(spec, &error_msg)) { + Err << "Could not compile benchmark re: " << error_msg << std::endl; + return false; + } + + // Special list of thread counts to use when none are specified + const std::vector one_thread = {1}; + + MutexLock l(mutex_); + for (std::unique_ptr& family : families_) { + // Family was deleted or benchmark doesn't match + if (!family) continue; + + if (family->ArgsCnt() == -1) { + family->Args({}); + } + const std::vector* thread_counts = + (family->thread_counts_.empty() + ? &one_thread + : &static_cast&>(family->thread_counts_)); + const size_t family_size = family->args_.size() * thread_counts->size(); + // The benchmark will be run at least 'family_size' different inputs. + // If 'family_size' is very large warn the user. + if (family_size > kMaxFamilySize) { + Err << "The number of inputs is very large. " << family->name_ + << " will be repeated at least " << family_size << " times.\n"; + } + // reserve in the special case the regex ".", since we know the final + // family size. + if (spec == ".") benchmarks->reserve(family_size); + + for (auto const& args : family->args_) { + for (int num_threads : *thread_counts) { + Benchmark::Instance instance; + instance.name = family->name_; + instance.benchmark = family.get(); + instance.report_mode = family->report_mode_; + instance.arg = args; + instance.time_unit = family->time_unit_; + instance.range_multiplier = family->range_multiplier_; + instance.min_time = family->min_time_; + instance.iterations = family->iterations_; + instance.repetitions = family->repetitions_; + instance.use_real_time = family->use_real_time_; + instance.use_manual_time = family->use_manual_time_; + instance.complexity = family->complexity_; + instance.complexity_lambda = family->complexity_lambda_; + instance.threads = num_threads; + + // Add arguments to instance name + size_t arg_i = 0; + for (auto const& arg : args) { + instance.name += "/"; + + if (arg_i < family->arg_names_.size()) { + const auto& arg_name = family->arg_names_[arg_i]; + if (!arg_name.empty()) { + instance.name += + StringPrintF("%s:", family->arg_names_[arg_i].c_str()); + } + } + + instance.name += StringPrintF("%d", arg); + ++arg_i; + } + + if (!IsZero(family->min_time_)) + instance.name += StringPrintF("/min_time:%0.3f", family->min_time_); + if (family->iterations_ != 0) + instance.name += StringPrintF("/iterations:%d", family->iterations_); + if (family->repetitions_ != 0) + instance.name += StringPrintF("/repeats:%d", family->repetitions_); + + if (family->use_manual_time_) { + instance.name += "/manual_time"; + } else if (family->use_real_time_) { + instance.name += "/real_time"; + } + + // Add the number of threads used to the name + if (!family->thread_counts_.empty()) { + instance.name += StringPrintF("/threads:%d", instance.threads); + } + + if (re.Match(instance.name)) { + instance.last_benchmark_instance = (&args == &family->args_.back()); + benchmarks->push_back(std::move(instance)); + } + } + } + } + return true; +} + +Benchmark* RegisterBenchmarkInternal(Benchmark* bench) { + std::unique_ptr bench_ptr(bench); + BenchmarkFamilies* families = BenchmarkFamilies::GetInstance(); + families->AddBenchmark(std::move(bench_ptr)); + return bench; +} + +// FIXME: This function is a hack so that benchmark.cc can access +// `BenchmarkFamilies` +bool FindBenchmarksInternal(const std::string& re, + std::vector* benchmarks, + std::ostream* Err) { + return BenchmarkFamilies::GetInstance()->FindBenchmarks(re, benchmarks, Err); +} + +//=============================================================================// +// Benchmark +//=============================================================================// + +Benchmark::Benchmark(const char* name) + : name_(name), + report_mode_(RM_Unspecified), + time_unit_(kNanosecond), + range_multiplier_(kRangeMultiplier), + min_time_(0), + iterations_(0), + repetitions_(0), + use_real_time_(false), + use_manual_time_(false), + complexity_(oNone), + complexity_lambda_(nullptr) {} + +Benchmark::~Benchmark() {} + +void Benchmark::AddRange(std::vector* dst, int lo, int hi, int mult) { + CHECK_GE(lo, 0); + CHECK_GE(hi, lo); + CHECK_GE(mult, 2); + + // Add "lo" + dst->push_back(lo); + + static const int kint32max = std::numeric_limits::max(); + + // Now space out the benchmarks in multiples of "mult" + for (int32_t i = 1; i < kint32max / mult; i *= mult) { + if (i >= hi) break; + if (i > lo) { + dst->push_back(i); + } + } + // Add "hi" (if different from "lo") + if (hi != lo) { + dst->push_back(hi); + } +} + +Benchmark* Benchmark::Arg(int x) { + CHECK(ArgsCnt() == -1 || ArgsCnt() == 1); + args_.push_back({x}); + return this; +} + +Benchmark* Benchmark::Unit(TimeUnit unit) { + time_unit_ = unit; + return this; +} + +Benchmark* Benchmark::Range(int start, int limit) { + CHECK(ArgsCnt() == -1 || ArgsCnt() == 1); + std::vector arglist; + AddRange(&arglist, start, limit, range_multiplier_); + + for (int i : arglist) { + args_.push_back({i}); + } + return this; +} + +Benchmark* Benchmark::Ranges(const std::vector>& ranges) { + CHECK(ArgsCnt() == -1 || ArgsCnt() == static_cast(ranges.size())); + std::vector> arglists(ranges.size()); + std::size_t total = 1; + for (std::size_t i = 0; i < ranges.size(); i++) { + AddRange(&arglists[i], ranges[i].first, ranges[i].second, + range_multiplier_); + total *= arglists[i].size(); + } + + std::vector ctr(arglists.size(), 0); + + for (std::size_t i = 0; i < total; i++) { + std::vector tmp; + tmp.reserve(arglists.size()); + + for (std::size_t j = 0; j < arglists.size(); j++) { + tmp.push_back(arglists[j].at(ctr[j])); + } + + args_.push_back(std::move(tmp)); + + for (std::size_t j = 0; j < arglists.size(); j++) { + if (ctr[j] + 1 < arglists[j].size()) { + ++ctr[j]; + break; + } + ctr[j] = 0; + } + } + return this; +} + +Benchmark* Benchmark::ArgName(const std::string& name) { + CHECK(ArgsCnt() == -1 || ArgsCnt() == 1); + arg_names_ = {name}; + return this; +} + +Benchmark* Benchmark::ArgNames(const std::vector& names) { + CHECK(ArgsCnt() == -1 || ArgsCnt() == static_cast(names.size())); + arg_names_ = names; + return this; +} + +Benchmark* Benchmark::DenseRange(int start, int limit, int step) { + CHECK(ArgsCnt() == -1 || ArgsCnt() == 1); + CHECK_GE(start, 0); + CHECK_LE(start, limit); + for (int arg = start; arg <= limit; arg += step) { + args_.push_back({arg}); + } + return this; +} + +Benchmark* Benchmark::Args(const std::vector& args) { + CHECK(ArgsCnt() == -1 || ArgsCnt() == static_cast(args.size())); + args_.push_back(args); + return this; +} + +Benchmark* Benchmark::Apply(void (*custom_arguments)(Benchmark* benchmark)) { + custom_arguments(this); + return this; +} + +Benchmark* Benchmark::RangeMultiplier(int multiplier) { + CHECK(multiplier > 1); + range_multiplier_ = multiplier; + return this; +} + + +Benchmark* Benchmark::MinTime(double t) { + CHECK(t > 0.0); + CHECK(iterations_ == 0); + min_time_ = t; + return this; +} + + +Benchmark* Benchmark::Iterations(size_t n) { + CHECK(n > 0); + CHECK(IsZero(min_time_)); + iterations_ = n; + return this; +} + +Benchmark* Benchmark::Repetitions(int n) { + CHECK(n > 0); + repetitions_ = n; + return this; +} + +Benchmark* Benchmark::ReportAggregatesOnly(bool value) { + report_mode_ = value ? RM_ReportAggregatesOnly : RM_Default; + return this; +} + +Benchmark* Benchmark::UseRealTime() { + CHECK(!use_manual_time_) + << "Cannot set UseRealTime and UseManualTime simultaneously."; + use_real_time_ = true; + return this; +} + +Benchmark* Benchmark::UseManualTime() { + CHECK(!use_real_time_) + << "Cannot set UseRealTime and UseManualTime simultaneously."; + use_manual_time_ = true; + return this; +} + +Benchmark* Benchmark::Complexity(BigO complexity) { + complexity_ = complexity; + return this; +} + +Benchmark* Benchmark::Complexity(BigOFunc* complexity) { + complexity_lambda_ = complexity; + complexity_ = oLambda; + return this; +} + +Benchmark* Benchmark::Threads(int t) { + CHECK_GT(t, 0); + thread_counts_.push_back(t); + return this; +} + +Benchmark* Benchmark::ThreadRange(int min_threads, int max_threads) { + CHECK_GT(min_threads, 0); + CHECK_GE(max_threads, min_threads); + + AddRange(&thread_counts_, min_threads, max_threads, 2); + return this; +} + +Benchmark* Benchmark::DenseThreadRange(int min_threads, int max_threads, + int stride) { + CHECK_GT(min_threads, 0); + CHECK_GE(max_threads, min_threads); + CHECK_GE(stride, 1); + + for (auto i = min_threads; i < max_threads; i += stride) { + thread_counts_.push_back(i); + } + thread_counts_.push_back(max_threads); + return this; +} + +Benchmark* Benchmark::ThreadPerCpu() { + static int num_cpus = NumCPUs(); + thread_counts_.push_back(num_cpus); + return this; +} + +void Benchmark::SetName(const char* name) { name_ = name; } + +int Benchmark::ArgsCnt() const { + if (args_.empty()) { + if (arg_names_.empty()) return -1; + return static_cast(arg_names_.size()); + } + return static_cast(args_.front().size()); +} + +//=============================================================================// +// FunctionBenchmark +//=============================================================================// + +void FunctionBenchmark::Run(State& st) { func_(st); } + +} // end namespace internal + +void ClearRegisteredBenchmarks() { + internal::BenchmarkFamilies::GetInstance()->ClearBenchmarks(); +} + +} // end namespace benchmark diff --git a/src/check.h b/src/check.h new file mode 100644 index 0000000..73bead2 --- /dev/null +++ b/src/check.h @@ -0,0 +1,79 @@ +#ifndef CHECK_H_ +#define CHECK_H_ + +#include +#include +#include + +#include "internal_macros.h" +#include "log.h" + +namespace benchmark { +namespace internal { + +typedef void(AbortHandlerT)(); + +inline AbortHandlerT*& GetAbortHandler() { + static AbortHandlerT* handler = &std::abort; + return handler; +} + +BENCHMARK_NORETURN inline void CallAbortHandler() { + GetAbortHandler()(); + std::abort(); // fallback to enforce noreturn +} + +// CheckHandler is the class constructed by failing CHECK macros. CheckHandler +// will log information about the failures and abort when it is destructed. +class CheckHandler { + public: + CheckHandler(const char* check, const char* file, const char* func, int line) + : log_(GetErrorLogInstance()) { + log_ << file << ":" << line << ": " << func << ": Check `" << check + << "' failed. "; + } + + LogType& GetLog() { return log_; } + + BENCHMARK_NORETURN ~CheckHandler() BENCHMARK_NOEXCEPT_OP(false) { + log_ << std::endl; + CallAbortHandler(); + } + + CheckHandler& operator=(const CheckHandler&) = delete; + CheckHandler(const CheckHandler&) = delete; + CheckHandler() = delete; + + private: + LogType& log_; +}; + +} // end namespace internal +} // end namespace benchmark + +// The CHECK macro returns a std::ostream object that can have extra information +// written to it. +#ifndef NDEBUG +#define CHECK(b) \ + (b ? ::benchmark::internal::GetNullLogInstance() \ + : ::benchmark::internal::CheckHandler(#b, __FILE__, __func__, __LINE__) \ + .GetLog()) +#else +#define CHECK(b) ::benchmark::internal::GetNullLogInstance() +#endif + +#define CHECK_EQ(a, b) CHECK((a) == (b)) +#define CHECK_NE(a, b) CHECK((a) != (b)) +#define CHECK_GE(a, b) CHECK((a) >= (b)) +#define CHECK_LE(a, b) CHECK((a) <= (b)) +#define CHECK_GT(a, b) CHECK((a) > (b)) +#define CHECK_LT(a, b) CHECK((a) < (b)) + +#define CHECK_FLOAT_EQ(a, b, eps) CHECK(std::fabs((a) - (b)) < (eps)) +#define CHECK_FLOAT_NE(a, b, eps) CHECK(std::fabs((a) - (b)) >= (eps)) +#define CHECK_FLOAT_GE(a, b, eps) CHECK((a) - (b) > -(eps)) +#define CHECK_FLOAT_LE(a, b, eps) CHECK((b) - (a) > -(eps)) +#define CHECK_FLOAT_GT(a, b, eps) CHECK((a) - (b) > (eps)) +#define CHECK_FLOAT_LT(a, b, eps) CHECK((b) - (a) > (eps)) + +#endif // CHECK_H_ diff --git a/src/colorprint.cc b/src/colorprint.cc new file mode 100644 index 0000000..2dec4a8 --- /dev/null +++ b/src/colorprint.cc @@ -0,0 +1,188 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "colorprint.h" + +#include +#include +#include +#include +#include +#include + +#include "check.h" +#include "internal_macros.h" + +#ifdef BENCHMARK_OS_WINDOWS +#include +#include +#else +#include +#endif // BENCHMARK_OS_WINDOWS + +namespace benchmark { +namespace { +#ifdef BENCHMARK_OS_WINDOWS +typedef WORD PlatformColorCode; +#else +typedef const char* PlatformColorCode; +#endif + +PlatformColorCode GetPlatformColorCode(LogColor color) { +#ifdef BENCHMARK_OS_WINDOWS + switch (color) { + case COLOR_RED: + return FOREGROUND_RED; + case COLOR_GREEN: + return FOREGROUND_GREEN; + case COLOR_YELLOW: + return FOREGROUND_RED | FOREGROUND_GREEN; + case COLOR_BLUE: + return FOREGROUND_BLUE; + case COLOR_MAGENTA: + return FOREGROUND_BLUE | FOREGROUND_RED; + case COLOR_CYAN: + return FOREGROUND_BLUE | FOREGROUND_GREEN; + case COLOR_WHITE: // fall through to default + default: + return 0; + } +#else + switch (color) { + case COLOR_RED: + return "1"; + case COLOR_GREEN: + return "2"; + case COLOR_YELLOW: + return "3"; + case COLOR_BLUE: + return "4"; + case COLOR_MAGENTA: + return "5"; + case COLOR_CYAN: + return "6"; + case COLOR_WHITE: + return "7"; + default: + return nullptr; + }; +#endif +} + +} // end namespace + +std::string FormatString(const char* msg, va_list args) { + // we might need a second shot at this, so pre-emptivly make a copy + va_list args_cp; + va_copy(args_cp, args); + + std::size_t size = 256; + char local_buff[256]; + auto ret = vsnprintf(local_buff, size, msg, args_cp); + + va_end(args_cp); + + // currently there is no error handling for failure, so this is hack. + CHECK(ret >= 0); + + if (ret == 0) // handle empty expansion + return {}; + else if (static_cast(ret) < size) + return local_buff; + else { + // we did not provide a long enough buffer on our first attempt. + size = (size_t)ret + 1; // + 1 for the null byte + std::unique_ptr buff(new char[size]); + ret = vsnprintf(buff.get(), size, msg, args); + CHECK(ret > 0 && ((size_t)ret) < size); + return buff.get(); + } +} + +std::string FormatString(const char* msg, ...) { + va_list args; + va_start(args, msg); + auto tmp = FormatString(msg, args); + va_end(args); + return tmp; +} + +void ColorPrintf(std::ostream& out, LogColor color, const char* fmt, ...) { + va_list args; + va_start(args, fmt); + ColorPrintf(out, color, fmt, args); + va_end(args); +} + +void ColorPrintf(std::ostream& out, LogColor color, const char* fmt, + va_list args) { +#ifdef BENCHMARK_OS_WINDOWS + ((void)out); // suppress unused warning + + const HANDLE stdout_handle = GetStdHandle(STD_OUTPUT_HANDLE); + + // Gets the current text color. + CONSOLE_SCREEN_BUFFER_INFO buffer_info; + GetConsoleScreenBufferInfo(stdout_handle, &buffer_info); + const WORD old_color_attrs = buffer_info.wAttributes; + + // We need to flush the stream buffers into the console before each + // SetConsoleTextAttribute call lest it affect the text that is already + // printed but has not yet reached the console. + fflush(stdout); + SetConsoleTextAttribute(stdout_handle, + GetPlatformColorCode(color) | FOREGROUND_INTENSITY); + vprintf(fmt, args); + + fflush(stdout); + // Restores the text color. + SetConsoleTextAttribute(stdout_handle, old_color_attrs); +#else + const char* color_code = GetPlatformColorCode(color); + if (color_code) out << FormatString("\033[0;3%sm", color_code); + out << FormatString(fmt, args) << "\033[m"; +#endif +} + +bool IsColorTerminal() { +#if BENCHMARK_OS_WINDOWS + // On Windows the TERM variable is usually not set, but the + // console there does support colors. + return 0 != _isatty(_fileno(stdout)); +#else + // On non-Windows platforms, we rely on the TERM variable. This list of + // supported TERM values is copied from Google Test: + // . + const char* const SUPPORTED_TERM_VALUES[] = { + "xterm", "xterm-color", "xterm-256color", + "screen", "screen-256color", "tmux", + "tmux-256color", "rxvt-unicode", "rxvt-unicode-256color", + "linux", "cygwin", + }; + + const char* const term = getenv("TERM"); + + bool term_supports_color = false; + for (const char* candidate : SUPPORTED_TERM_VALUES) { + if (term && 0 == strcmp(term, candidate)) { + term_supports_color = true; + break; + } + } + + return 0 != isatty(fileno(stdout)) && term_supports_color; +#endif // BENCHMARK_OS_WINDOWS +} + +} // end namespace benchmark diff --git a/src/colorprint.h b/src/colorprint.h new file mode 100644 index 0000000..9f6fab9 --- /dev/null +++ b/src/colorprint.h @@ -0,0 +1,33 @@ +#ifndef BENCHMARK_COLORPRINT_H_ +#define BENCHMARK_COLORPRINT_H_ + +#include +#include +#include + +namespace benchmark { +enum LogColor { + COLOR_DEFAULT, + COLOR_RED, + COLOR_GREEN, + COLOR_YELLOW, + COLOR_BLUE, + COLOR_MAGENTA, + COLOR_CYAN, + COLOR_WHITE +}; + +std::string FormatString(const char* msg, va_list args); +std::string FormatString(const char* msg, ...); + +void ColorPrintf(std::ostream& out, LogColor color, const char* fmt, + va_list args); +void ColorPrintf(std::ostream& out, LogColor color, const char* fmt, ...); + +// Returns true if stdout appears to be a terminal that supports colored +// output, false otherwise. +bool IsColorTerminal(); + +} // end namespace benchmark + +#endif // BENCHMARK_COLORPRINT_H_ diff --git a/src/commandlineflags.cc b/src/commandlineflags.cc new file mode 100644 index 0000000..2fc9251 --- /dev/null +++ b/src/commandlineflags.cc @@ -0,0 +1,218 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "commandlineflags.h" + +#include +#include +#include +#include +#include + +namespace benchmark { +// Parses 'str' for a 32-bit signed integer. If successful, writes +// the result to *value and returns true; otherwise leaves *value +// unchanged and returns false. +bool ParseInt32(const std::string& src_text, const char* str, int32_t* value) { + // Parses the environment variable as a decimal integer. + char* end = nullptr; + const long long_value = strtol(str, &end, 10); // NOLINT + + // Has strtol() consumed all characters in the string? + if (*end != '\0') { + // No - an invalid character was encountered. + std::cerr << src_text << " is expected to be a 32-bit integer, " + << "but actually has value \"" << str << "\".\n"; + return false; + } + + // Is the parsed value in the range of an Int32? + const int32_t result = static_cast(long_value); + if (long_value == std::numeric_limits::max() || + long_value == std::numeric_limits::min() || + // The parsed value overflows as a long. (strtol() returns + // LONG_MAX or LONG_MIN when the input overflows.) + result != long_value + // The parsed value overflows as an Int32. + ) { + std::cerr << src_text << " is expected to be a 32-bit integer, " + << "but actually has value \"" << str << "\", " + << "which overflows.\n"; + return false; + } + + *value = result; + return true; +} + +// Parses 'str' for a double. If successful, writes the result to *value and +// returns true; otherwise leaves *value unchanged and returns false. +bool ParseDouble(const std::string& src_text, const char* str, double* value) { + // Parses the environment variable as a decimal integer. + char* end = nullptr; + const double double_value = strtod(str, &end); // NOLINT + + // Has strtol() consumed all characters in the string? + if (*end != '\0') { + // No - an invalid character was encountered. + std::cerr << src_text << " is expected to be a double, " + << "but actually has value \"" << str << "\".\n"; + return false; + } + + *value = double_value; + return true; +} + +// Returns the name of the environment variable corresponding to the +// given flag. For example, FlagToEnvVar("foo") will return +// "BENCHMARK_FOO" in the open-source version. +static std::string FlagToEnvVar(const char* flag) { + const std::string flag_str(flag); + + std::string env_var; + for (size_t i = 0; i != flag_str.length(); ++i) + env_var += static_cast(::toupper(flag_str.c_str()[i])); + + return "BENCHMARK_" + env_var; +} + +// Reads and returns the Boolean environment variable corresponding to +// the given flag; if it's not set, returns default_value. +// +// The value is considered true iff it's not "0". +bool BoolFromEnv(const char* flag, bool default_value) { + const std::string env_var = FlagToEnvVar(flag); + const char* const string_value = getenv(env_var.c_str()); + return string_value == nullptr ? default_value + : strcmp(string_value, "0") != 0; +} + +// Reads and returns a 32-bit integer stored in the environment +// variable corresponding to the given flag; if it isn't set or +// doesn't represent a valid 32-bit integer, returns default_value. +int32_t Int32FromEnv(const char* flag, int32_t default_value) { + const std::string env_var = FlagToEnvVar(flag); + const char* const string_value = getenv(env_var.c_str()); + if (string_value == nullptr) { + // The environment variable is not set. + return default_value; + } + + int32_t result = default_value; + if (!ParseInt32(std::string("Environment variable ") + env_var, string_value, + &result)) { + std::cout << "The default value " << default_value << " is used.\n"; + return default_value; + } + + return result; +} + +// Reads and returns the string environment variable corresponding to +// the given flag; if it's not set, returns default_value. +const char* StringFromEnv(const char* flag, const char* default_value) { + const std::string env_var = FlagToEnvVar(flag); + const char* const value = getenv(env_var.c_str()); + return value == nullptr ? default_value : value; +} + +// Parses a string as a command line flag. The string should have +// the format "--flag=value". When def_optional is true, the "=value" +// part can be omitted. +// +// Returns the value of the flag, or nullptr if the parsing failed. +const char* ParseFlagValue(const char* str, const char* flag, + bool def_optional) { + // str and flag must not be nullptr. + if (str == nullptr || flag == nullptr) return nullptr; + + // The flag must start with "--". + const std::string flag_str = std::string("--") + std::string(flag); + const size_t flag_len = flag_str.length(); + if (strncmp(str, flag_str.c_str(), flag_len) != 0) return nullptr; + + // Skips the flag name. + const char* flag_end = str + flag_len; + + // When def_optional is true, it's OK to not have a "=value" part. + if (def_optional && (flag_end[0] == '\0')) return flag_end; + + // If def_optional is true and there are more characters after the + // flag name, or if def_optional is false, there must be a '=' after + // the flag name. + if (flag_end[0] != '=') return nullptr; + + // Returns the string after "=". + return flag_end + 1; +} + +bool ParseBoolFlag(const char* str, const char* flag, bool* value) { + // Gets the value of the flag as a string. + const char* const value_str = ParseFlagValue(str, flag, true); + + // Aborts if the parsing failed. + if (value_str == nullptr) return false; + + // Converts the string value to a bool. + *value = IsTruthyFlagValue(value_str); + return true; +} + +bool ParseInt32Flag(const char* str, const char* flag, int32_t* value) { + // Gets the value of the flag as a string. + const char* const value_str = ParseFlagValue(str, flag, false); + + // Aborts if the parsing failed. + if (value_str == nullptr) return false; + + // Sets *value to the value of the flag. + return ParseInt32(std::string("The value of flag --") + flag, value_str, + value); +} + +bool ParseDoubleFlag(const char* str, const char* flag, double* value) { + // Gets the value of the flag as a string. + const char* const value_str = ParseFlagValue(str, flag, false); + + // Aborts if the parsing failed. + if (value_str == nullptr) return false; + + // Sets *value to the value of the flag. + return ParseDouble(std::string("The value of flag --") + flag, value_str, + value); +} + +bool ParseStringFlag(const char* str, const char* flag, std::string* value) { + // Gets the value of the flag as a string. + const char* const value_str = ParseFlagValue(str, flag, false); + + // Aborts if the parsing failed. + if (value_str == nullptr) return false; + + *value = value_str; + return true; +} + +bool IsFlag(const char* str, const char* flag) { + return (ParseFlagValue(str, flag, true) != nullptr); +} + +bool IsTruthyFlagValue(const std::string& value) { + if (value.empty()) return true; + char ch = value[0]; + return isalnum(ch) && + !(ch == '0' || ch == 'f' || ch == 'F' || ch == 'n' || ch == 'N'); +} +} // end namespace benchmark diff --git a/src/commandlineflags.h b/src/commandlineflags.h new file mode 100644 index 0000000..945c9a9 --- /dev/null +++ b/src/commandlineflags.h @@ -0,0 +1,79 @@ +#ifndef BENCHMARK_COMMANDLINEFLAGS_H_ +#define BENCHMARK_COMMANDLINEFLAGS_H_ + +#include +#include + +// Macro for referencing flags. +#define FLAG(name) FLAGS_##name + +// Macros for declaring flags. +#define DECLARE_bool(name) extern bool FLAG(name) +#define DECLARE_int32(name) extern int32_t FLAG(name) +#define DECLARE_int64(name) extern int64_t FLAG(name) +#define DECLARE_double(name) extern double FLAG(name) +#define DECLARE_string(name) extern std::string FLAG(name) + +// Macros for defining flags. +#define DEFINE_bool(name, default_val, doc) bool FLAG(name) = (default_val) +#define DEFINE_int32(name, default_val, doc) int32_t FLAG(name) = (default_val) +#define DEFINE_int64(name, default_val, doc) int64_t FLAG(name) = (default_val) +#define DEFINE_double(name, default_val, doc) double FLAG(name) = (default_val) +#define DEFINE_string(name, default_val, doc) \ + std::string FLAG(name) = (default_val) + +namespace benchmark { +// Parses 'str' for a 32-bit signed integer. If successful, writes the result +// to *value and returns true; otherwise leaves *value unchanged and returns +// false. +bool ParseInt32(const std::string& src_text, const char* str, int32_t* value); + +// Parses a bool/Int32/string from the environment variable +// corresponding to the given Google Test flag. +bool BoolFromEnv(const char* flag, bool default_val); +int32_t Int32FromEnv(const char* flag, int32_t default_val); +double DoubleFromEnv(const char* flag, double default_val); +const char* StringFromEnv(const char* flag, const char* default_val); + +// Parses a string for a bool flag, in the form of either +// "--flag=value" or "--flag". +// +// In the former case, the value is taken as true if it passes IsTruthyValue(). +// +// In the latter case, the value is taken as true. +// +// On success, stores the value of the flag in *value, and returns +// true. On failure, returns false without changing *value. +bool ParseBoolFlag(const char* str, const char* flag, bool* value); + +// Parses a string for an Int32 flag, in the form of +// "--flag=value". +// +// On success, stores the value of the flag in *value, and returns +// true. On failure, returns false without changing *value. +bool ParseInt32Flag(const char* str, const char* flag, int32_t* value); + +// Parses a string for a Double flag, in the form of +// "--flag=value". +// +// On success, stores the value of the flag in *value, and returns +// true. On failure, returns false without changing *value. +bool ParseDoubleFlag(const char* str, const char* flag, double* value); + +// Parses a string for a string flag, in the form of +// "--flag=value". +// +// On success, stores the value of the flag in *value, and returns +// true. On failure, returns false without changing *value. +bool ParseStringFlag(const char* str, const char* flag, std::string* value); + +// Returns true if the string matches the flag. +bool IsFlag(const char* str, const char* flag); + +// Returns true unless value starts with one of: '0', 'f', 'F', 'n' or 'N', or +// some non-alphanumeric character. As a special case, also returns true if +// value is the empty string. +bool IsTruthyFlagValue(const std::string& value); +} // end namespace benchmark + +#endif // BENCHMARK_COMMANDLINEFLAGS_H_ diff --git a/src/complexity.cc b/src/complexity.cc new file mode 100644 index 0000000..33975be --- /dev/null +++ b/src/complexity.cc @@ -0,0 +1,324 @@ +// Copyright 2016 Ismael Jimenez Martinez. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +// Source project : https://github.com/ismaelJimenez/cpp.leastsq +// Adapted to be used with google benchmark + +#include "benchmark/benchmark.h" + +#include +#include +#include "check.h" +#include "complexity.h" +#include "stat.h" + +namespace benchmark { + +// Internal function to calculate the different scalability forms +BigOFunc* FittingCurve(BigO complexity) { + switch (complexity) { + case oN: + return [](int n) -> double { return n; }; + case oNSquared: + return [](int n) -> double { return std::pow(n, 2); }; + case oNCubed: + return [](int n) -> double { return std::pow(n, 3); }; + case oLogN: + return [](int n) { return log2(n); }; + case oNLogN: + return [](int n) { return n * log2(n); }; + case o1: + default: + return [](int) { return 1.0; }; + } +} + +// Function to return an string for the calculated complexity +std::string GetBigOString(BigO complexity) { + switch (complexity) { + case oN: + return "N"; + case oNSquared: + return "N^2"; + case oNCubed: + return "N^3"; + case oLogN: + return "lgN"; + case oNLogN: + return "NlgN"; + case o1: + return "(1)"; + default: + return "f(N)"; + } +} + +// Find the coefficient for the high-order term in the running time, by +// minimizing the sum of squares of relative error, for the fitting curve +// given by the lambda expresion. +// - n : Vector containing the size of the benchmark tests. +// - time : Vector containing the times for the benchmark tests. +// - fitting_curve : lambda expresion (e.g. [](int n) {return n; };). + +// For a deeper explanation on the algorithm logic, look the README file at +// http://github.com/ismaelJimenez/Minimal-Cpp-Least-Squared-Fit + +LeastSq MinimalLeastSq(const std::vector& n, + const std::vector& time, + BigOFunc* fitting_curve) { + double sigma_gn = 0.0; + double sigma_gn_squared = 0.0; + double sigma_time = 0.0; + double sigma_time_gn = 0.0; + + // Calculate least square fitting parameter + for (size_t i = 0; i < n.size(); ++i) { + double gn_i = fitting_curve(n[i]); + sigma_gn += gn_i; + sigma_gn_squared += gn_i * gn_i; + sigma_time += time[i]; + sigma_time_gn += time[i] * gn_i; + } + + LeastSq result; + result.complexity = oLambda; + + // Calculate complexity. + result.coef = sigma_time_gn / sigma_gn_squared; + + // Calculate RMS + double rms = 0.0; + for (size_t i = 0; i < n.size(); ++i) { + double fit = result.coef * fitting_curve(n[i]); + rms += pow((time[i] - fit), 2); + } + + // Normalized RMS by the mean of the observed values + double mean = sigma_time / n.size(); + result.rms = sqrt(rms / n.size()) / mean; + + return result; +} + +// Find the coefficient for the high-order term in the running time, by +// minimizing the sum of squares of relative error. +// - n : Vector containing the size of the benchmark tests. +// - time : Vector containing the times for the benchmark tests. +// - complexity : If different than oAuto, the fitting curve will stick to +// this one. If it is oAuto, it will be calculated the best +// fitting curve. +LeastSq MinimalLeastSq(const std::vector& n, + const std::vector& time, const BigO complexity) { + CHECK_EQ(n.size(), time.size()); + CHECK_GE(n.size(), 2); // Do not compute fitting curve is less than two + // benchmark runs are given + CHECK_NE(complexity, oNone); + + LeastSq best_fit; + + if (complexity == oAuto) { + std::vector fit_curves = {oLogN, oN, oNLogN, oNSquared, oNCubed}; + + // Take o1 as default best fitting curve + best_fit = MinimalLeastSq(n, time, FittingCurve(o1)); + best_fit.complexity = o1; + + // Compute all possible fitting curves and stick to the best one + for (const auto& fit : fit_curves) { + LeastSq current_fit = MinimalLeastSq(n, time, FittingCurve(fit)); + if (current_fit.rms < best_fit.rms) { + best_fit = current_fit; + best_fit.complexity = fit; + } + } + } else { + best_fit = MinimalLeastSq(n, time, FittingCurve(complexity)); + best_fit.complexity = complexity; + } + + return best_fit; +} + +std::vector ComputeStats( + const std::vector& reports) { + typedef BenchmarkReporter::Run Run; + std::vector results; + + auto error_count = + std::count_if(reports.begin(), reports.end(), + [](Run const& run) { return run.error_occurred; }); + + if (reports.size() - error_count < 2) { + // We don't report aggregated data if there was a single run. + return results; + } + // Accumulators. + Stat1_d real_accumulated_time_stat; + Stat1_d cpu_accumulated_time_stat; + Stat1_d bytes_per_second_stat; + Stat1_d items_per_second_stat; + // All repetitions should be run with the same number of iterations so we + // can take this information from the first benchmark. + int64_t const run_iterations = reports.front().iterations; + // create stats for user counters + struct CounterStat { + Counter c; + Stat1_d s; + }; + std::map< std::string, CounterStat > counter_stats; + for(Run const& r : reports) { + for(auto const& cnt : r.counters) { + auto it = counter_stats.find(cnt.first); + if(it == counter_stats.end()) { + counter_stats.insert({cnt.first, {cnt.second, Stat1_d{}}}); + } else { + CHECK_EQ(counter_stats[cnt.first].c.flags, cnt.second.flags); + } + } + } + + // Populate the accumulators. + for (Run const& run : reports) { + CHECK_EQ(reports[0].benchmark_name, run.benchmark_name); + CHECK_EQ(run_iterations, run.iterations); + if (run.error_occurred) continue; + real_accumulated_time_stat += + Stat1_d(run.real_accumulated_time / run.iterations); + cpu_accumulated_time_stat += + Stat1_d(run.cpu_accumulated_time / run.iterations); + items_per_second_stat += Stat1_d(run.items_per_second); + bytes_per_second_stat += Stat1_d(run.bytes_per_second); + // user counters + for(auto const& cnt : run.counters) { + auto it = counter_stats.find(cnt.first); + CHECK_NE(it, counter_stats.end()); + it->second.s += Stat1_d(cnt.second); + } + } + + // Get the data from the accumulator to BenchmarkReporter::Run's. + Run mean_data; + mean_data.benchmark_name = reports[0].benchmark_name + "_mean"; + mean_data.iterations = run_iterations; + mean_data.real_accumulated_time = + real_accumulated_time_stat.Mean() * run_iterations; + mean_data.cpu_accumulated_time = + cpu_accumulated_time_stat.Mean() * run_iterations; + mean_data.bytes_per_second = bytes_per_second_stat.Mean(); + mean_data.items_per_second = items_per_second_stat.Mean(); + mean_data.time_unit = reports[0].time_unit; + // user counters + for(auto const& kv : counter_stats) { + auto c = Counter(kv.second.s.Mean(), counter_stats[kv.first].c.flags); + mean_data.counters[kv.first] = c; + } + + // Only add label to mean/stddev if it is same for all runs + mean_data.report_label = reports[0].report_label; + for (std::size_t i = 1; i < reports.size(); i++) { + if (reports[i].report_label != reports[0].report_label) { + mean_data.report_label = ""; + break; + } + } + + Run stddev_data; + stddev_data.benchmark_name = reports[0].benchmark_name + "_stddev"; + stddev_data.report_label = mean_data.report_label; + stddev_data.iterations = 0; + stddev_data.real_accumulated_time = real_accumulated_time_stat.StdDev(); + stddev_data.cpu_accumulated_time = cpu_accumulated_time_stat.StdDev(); + stddev_data.bytes_per_second = bytes_per_second_stat.StdDev(); + stddev_data.items_per_second = items_per_second_stat.StdDev(); + stddev_data.time_unit = reports[0].time_unit; + // user counters + for(auto const& kv : counter_stats) { + auto c = Counter(kv.second.s.StdDev(), counter_stats[kv.first].c.flags); + stddev_data.counters[kv.first] = c; + } + + results.push_back(mean_data); + results.push_back(stddev_data); + return results; +} + +std::vector ComputeBigO( + const std::vector& reports) { + typedef BenchmarkReporter::Run Run; + std::vector results; + + if (reports.size() < 2) return results; + + // Accumulators. + std::vector n; + std::vector real_time; + std::vector cpu_time; + + // Populate the accumulators. + for (const Run& run : reports) { + CHECK_GT(run.complexity_n, 0) << "Did you forget to call SetComplexityN?"; + n.push_back(run.complexity_n); + real_time.push_back(run.real_accumulated_time / run.iterations); + cpu_time.push_back(run.cpu_accumulated_time / run.iterations); + } + + LeastSq result_cpu; + LeastSq result_real; + + if (reports[0].complexity == oLambda) { + result_cpu = MinimalLeastSq(n, cpu_time, reports[0].complexity_lambda); + result_real = MinimalLeastSq(n, real_time, reports[0].complexity_lambda); + } else { + result_cpu = MinimalLeastSq(n, cpu_time, reports[0].complexity); + result_real = MinimalLeastSq(n, real_time, result_cpu.complexity); + } + std::string benchmark_name = + reports[0].benchmark_name.substr(0, reports[0].benchmark_name.find('/')); + + // Get the data from the accumulator to BenchmarkReporter::Run's. + Run big_o; + big_o.benchmark_name = benchmark_name + "_BigO"; + big_o.iterations = 0; + big_o.real_accumulated_time = result_real.coef; + big_o.cpu_accumulated_time = result_cpu.coef; + big_o.report_big_o = true; + big_o.complexity = result_cpu.complexity; + + // All the time results are reported after being multiplied by the + // time unit multiplier. But since RMS is a relative quantity it + // should not be multiplied at all. So, here, we _divide_ it by the + // multiplier so that when it is multiplied later the result is the + // correct one. + double multiplier = GetTimeUnitMultiplier(reports[0].time_unit); + + // Only add label to mean/stddev if it is same for all runs + Run rms; + big_o.report_label = reports[0].report_label; + rms.benchmark_name = benchmark_name + "_RMS"; + rms.report_label = big_o.report_label; + rms.iterations = 0; + rms.real_accumulated_time = result_real.rms / multiplier; + rms.cpu_accumulated_time = result_cpu.rms / multiplier; + rms.report_rms = true; + rms.complexity = result_cpu.complexity; + // don't forget to keep the time unit, or we won't be able to + // recover the correct value. + rms.time_unit = reports[0].time_unit; + + results.push_back(big_o); + results.push_back(rms); + return results; +} + +} // end namespace benchmark diff --git a/src/complexity.h b/src/complexity.h new file mode 100644 index 0000000..c0ca60e --- /dev/null +++ b/src/complexity.h @@ -0,0 +1,60 @@ +// Copyright 2016 Ismael Jimenez Martinez. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +// Source project : https://github.com/ismaelJimenez/cpp.leastsq +// Adapted to be used with google benchmark + +#ifndef COMPLEXITY_H_ +#define COMPLEXITY_H_ + +#include +#include + +#include "benchmark/benchmark.h" + +namespace benchmark { + +// Return a vector containing the mean and standard devation information for +// the specified list of reports. If 'reports' contains less than two +// non-errored runs an empty vector is returned +std::vector ComputeStats( + const std::vector& reports); + +// Return a vector containing the bigO and RMS information for the specified +// list of reports. If 'reports.size() < 2' an empty vector is returned. +std::vector ComputeBigO( + const std::vector& reports); + +// This data structure will contain the result returned by MinimalLeastSq +// - coef : Estimated coeficient for the high-order term as +// interpolated from data. +// - rms : Normalized Root Mean Squared Error. +// - complexity : Scalability form (e.g. oN, oNLogN). In case a scalability +// form has been provided to MinimalLeastSq this will return +// the same value. In case BigO::oAuto has been selected, this +// parameter will return the best fitting curve detected. + +struct LeastSq { + LeastSq() : coef(0.0), rms(0.0), complexity(oNone) {} + + double coef; + double rms; + BigO complexity; +}; + +// Function to return an string for the calculated complexity +std::string GetBigOString(BigO complexity); + +} // end namespace benchmark +#endif // COMPLEXITY_H_ diff --git a/src/console_reporter.cc b/src/console_reporter.cc new file mode 100644 index 0000000..4bb6f71 --- /dev/null +++ b/src/console_reporter.cc @@ -0,0 +1,180 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "benchmark/benchmark.h" +#include "complexity.h" +#include "counter.h" + +#include +#include +#include +#include +#include +#include +#include + +#include "check.h" +#include "colorprint.h" +#include "commandlineflags.h" +#include "internal_macros.h" +#include "string_util.h" +#include "timers.h" + +namespace benchmark { + +bool ConsoleReporter::ReportContext(const Context& context) { + name_field_width_ = context.name_field_width; + printed_header_ = false; + prev_counters_.clear(); + + PrintBasicContext(&GetErrorStream(), context); + +#ifdef BENCHMARK_OS_WINDOWS + if ((output_options_ & OO_Color) && &std::cout != &GetOutputStream()) { + GetErrorStream() + << "Color printing is only supported for stdout on windows." + " Disabling color printing\n"; + output_options_ = static_cast< OutputOptions >(output_options_ & ~OO_Color); + } +#endif + + return true; +} + +void ConsoleReporter::PrintHeader(const Run& run) { + std::string str = FormatString("%-*s %13s %13s %10s", static_cast(name_field_width_), + "Benchmark", "Time", "CPU", "Iterations"); + if(!run.counters.empty()) { + if(output_options_ & OO_Tabular) { + for(auto const& c : run.counters) { + str += FormatString(" %10s", c.first.c_str()); + } + } else { + str += " UserCounters..."; + } + } + str += "\n"; + std::string line = std::string(str.length(), '-'); + GetOutputStream() << line << "\n" << str << line << "\n"; +} + +void ConsoleReporter::ReportRuns(const std::vector& reports) { + for (const auto& run : reports) { + // print the header: + // --- if none was printed yet + bool print_header = !printed_header_; + // --- or if the format is tabular and this run + // has different fields from the prev header + print_header |= (output_options_ & OO_Tabular) && + (!internal::SameNames(run.counters, prev_counters_)); + if (print_header) { + printed_header_ = true; + prev_counters_ = run.counters; + PrintHeader(run); + } + // As an alternative to printing the headers like this, we could sort + // the benchmarks by header and then print. But this would require + // waiting for the full results before printing, or printing twice. + PrintRunData(run); + } +} + +static void IgnoreColorPrint(std::ostream& out, LogColor, const char* fmt, + ...) { + va_list args; + va_start(args, fmt); + out << FormatString(fmt, args); + va_end(args); +} + +void ConsoleReporter::PrintRunData(const Run& result) { + typedef void(PrinterFn)(std::ostream&, LogColor, const char*, ...); + auto& Out = GetOutputStream(); + PrinterFn* printer = (output_options_ & OO_Color) ? + (PrinterFn*)ColorPrintf : IgnoreColorPrint; + auto name_color = + (result.report_big_o || result.report_rms) ? COLOR_BLUE : COLOR_GREEN; + printer(Out, name_color, "%-*s ", name_field_width_, + result.benchmark_name.c_str()); + + if (result.error_occurred) { + printer(Out, COLOR_RED, "ERROR OCCURRED: \'%s\'", + result.error_message.c_str()); + printer(Out, COLOR_DEFAULT, "\n"); + return; + } + // Format bytes per second + std::string rate; + if (result.bytes_per_second > 0) { + rate = StrCat(" ", HumanReadableNumber(result.bytes_per_second), "B/s"); + } + + // Format items per second + std::string items; + if (result.items_per_second > 0) { + items = + StrCat(" ", HumanReadableNumber(result.items_per_second), " items/s"); + } + + const double real_time = result.GetAdjustedRealTime(); + const double cpu_time = result.GetAdjustedCPUTime(); + + if (result.report_big_o) { + std::string big_o = GetBigOString(result.complexity); + printer(Out, COLOR_YELLOW, "%10.2f %s %10.2f %s ", real_time, big_o.c_str(), + cpu_time, big_o.c_str()); + } else if (result.report_rms) { + printer(Out, COLOR_YELLOW, "%10.0f %% %10.0f %% ", real_time * 100, + cpu_time * 100); + } else { + const char* timeLabel = GetTimeUnitString(result.time_unit); + printer(Out, COLOR_YELLOW, "%10.0f %s %10.0f %s ", real_time, timeLabel, + cpu_time, timeLabel); + } + + if (!result.report_big_o && !result.report_rms) { + printer(Out, COLOR_CYAN, "%10lld", result.iterations); + } + + for (auto& c : result.counters) { + auto const& s = HumanReadableNumber(c.second.value); + if (output_options_ & OO_Tabular) { + if (c.second.flags & Counter::kIsRate) { + printer(Out, COLOR_DEFAULT, " %8s/s", s.c_str()); + } else { + printer(Out, COLOR_DEFAULT, " %10s", s.c_str()); + } + } else { + const char* unit = (c.second.flags & Counter::kIsRate) ? "/s" : ""; + printer(Out, COLOR_DEFAULT, " %s=%s%s", c.first.c_str(), s.c_str(), + unit); + } + } + + if (!rate.empty()) { + printer(Out, COLOR_DEFAULT, " %*s", 13, rate.c_str()); + } + + if (!items.empty()) { + printer(Out, COLOR_DEFAULT, " %*s", 18, items.c_str()); + } + + if (!result.report_label.empty()) { + printer(Out, COLOR_DEFAULT, " %s", result.report_label.c_str()); + } + + printer(Out, COLOR_DEFAULT, "\n"); +} + +} // end namespace benchmark diff --git a/src/counter.cc b/src/counter.cc new file mode 100644 index 0000000..ed1aa04 --- /dev/null +++ b/src/counter.cc @@ -0,0 +1,68 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "counter.h" + +namespace benchmark { +namespace internal { + +double Finish(Counter const& c, double cpu_time, double num_threads) { + double v = c.value; + if (c.flags & Counter::kIsRate) { + v /= cpu_time; + } + if (c.flags & Counter::kAvgThreads) { + v /= num_threads; + } + return v; +} + +void Finish(UserCounters *l, double cpu_time, double num_threads) { + for (auto &c : *l) { + c.second.value = Finish(c.second, cpu_time, num_threads); + } +} + +void Increment(UserCounters *l, UserCounters const& r) { + // add counters present in both or just in *l + for (auto &c : *l) { + auto it = r.find(c.first); + if (it != r.end()) { + c.second.value = c.second + it->second; + } + } + // add counters present in r, but not in *l + for (auto const &tc : r) { + auto it = l->find(tc.first); + if (it == l->end()) { + (*l)[tc.first] = tc.second; + } + } +} + +bool SameNames(UserCounters const& l, UserCounters const& r) { + if (&l == &r) return true; + if (l.size() != r.size()) { + return false; + } + for (auto const& c : l) { + if (r.find(c.first) == r.end()) { + return false; + } + } + return true; +} + +} // end namespace internal +} // end namespace benchmark diff --git a/src/counter.h b/src/counter.h new file mode 100644 index 0000000..dd6865a --- /dev/null +++ b/src/counter.h @@ -0,0 +1,26 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "benchmark/benchmark.h" + +namespace benchmark { + +// these counter-related functions are hidden to reduce API surface. +namespace internal { +void Finish(UserCounters *l, double time, double num_threads); +void Increment(UserCounters *l, UserCounters const& r); +bool SameNames(UserCounters const& l, UserCounters const& r); +} // end namespace internal + +} //end namespace benchmark diff --git a/src/csv_reporter.cc b/src/csv_reporter.cc new file mode 100644 index 0000000..3551064 --- /dev/null +++ b/src/csv_reporter.cc @@ -0,0 +1,149 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "benchmark/benchmark.h" +#include "complexity.h" + +#include +#include +#include +#include +#include +#include + +#include "string_util.h" +#include "timers.h" +#include "check.h" + +// File format reference: http://edoceo.com/utilitas/csv-file-format. + +namespace benchmark { + +namespace { +std::vector elements = { + "name", "iterations", "real_time", "cpu_time", + "time_unit", "bytes_per_second", "items_per_second", "label", + "error_occurred", "error_message"}; +} // namespace + +bool CSVReporter::ReportContext(const Context& context) { + PrintBasicContext(&GetErrorStream(), context); + return true; +} + +void CSVReporter::ReportRuns(const std::vector & reports) { + std::ostream& Out = GetOutputStream(); + + if (!printed_header_) { + // save the names of all the user counters + for (const auto& run : reports) { + for (const auto& cnt : run.counters) { + user_counter_names_.insert(cnt.first); + } + } + + // print the header + for (auto B = elements.begin(); B != elements.end();) { + Out << *B++; + if (B != elements.end()) Out << ","; + } + for (auto B = user_counter_names_.begin(); B != user_counter_names_.end();) { + Out << ",\"" << *B++ << "\""; + } + Out << "\n"; + + printed_header_ = true; + } else { + // check that all the current counters are saved in the name set + for (const auto& run : reports) { + for (const auto& cnt : run.counters) { + CHECK(user_counter_names_.find(cnt.first) != user_counter_names_.end()) + << "All counters must be present in each run. " + << "Counter named \"" << cnt.first + << "\" was not in a run after being added to the header"; + } + } + } + + // print results for each run + for (const auto& run : reports) { + PrintRunData(run); + } + +} + +void CSVReporter::PrintRunData(const Run & run) { + std::ostream& Out = GetOutputStream(); + + // Field with embedded double-quote characters must be doubled and the field + // delimited with double-quotes. + std::string name = run.benchmark_name; + ReplaceAll(&name, "\"", "\"\""); + Out << '"' << name << "\","; + if (run.error_occurred) { + Out << std::string(elements.size() - 3, ','); + Out << "true,"; + std::string msg = run.error_message; + ReplaceAll(&msg, "\"", "\"\""); + Out << '"' << msg << "\"\n"; + return; + } + + // Do not print iteration on bigO and RMS report + if (!run.report_big_o && !run.report_rms) { + Out << run.iterations; + } + Out << ","; + + Out << run.GetAdjustedRealTime() << ","; + Out << run.GetAdjustedCPUTime() << ","; + + // Do not print timeLabel on bigO and RMS report + if (run.report_big_o) { + Out << GetBigOString(run.complexity); + } else if (!run.report_rms) { + Out << GetTimeUnitString(run.time_unit); + } + Out << ","; + + if (run.bytes_per_second > 0.0) { + Out << run.bytes_per_second; + } + Out << ","; + if (run.items_per_second > 0.0) { + Out << run.items_per_second; + } + Out << ","; + if (!run.report_label.empty()) { + // Field with embedded double-quote characters must be doubled and the field + // delimited with double-quotes. + std::string label = run.report_label; + ReplaceAll(&label, "\"", "\"\""); + Out << "\"" << label << "\""; + } + Out << ",,"; // for error_occurred and error_message + + // Print user counters + for (const auto &ucn : user_counter_names_) { + auto it = run.counters.find(ucn); + if(it == run.counters.end()) { + Out << ","; + } else { + Out << "," << it->second; + } + } + Out << '\n'; +} + +} // end namespace benchmark diff --git a/src/cycleclock.h b/src/cycleclock.h new file mode 100644 index 0000000..4251fe4 --- /dev/null +++ b/src/cycleclock.h @@ -0,0 +1,172 @@ +// ---------------------------------------------------------------------- +// CycleClock +// A CycleClock tells you the current time in Cycles. The "time" +// is actually time since power-on. This is like time() but doesn't +// involve a system call and is much more precise. +// +// NOTE: Not all cpu/platform/kernel combinations guarantee that this +// clock increments at a constant rate or is synchronized across all logical +// cpus in a system. +// +// If you need the above guarantees, please consider using a different +// API. There are efforts to provide an interface which provides a millisecond +// granularity and implemented as a memory read. A memory read is generally +// cheaper than the CycleClock for many architectures. +// +// Also, in some out of order CPU implementations, the CycleClock is not +// serializing. So if you're trying to count at cycles granularity, your +// data might be inaccurate due to out of order instruction execution. +// ---------------------------------------------------------------------- + +#ifndef BENCHMARK_CYCLECLOCK_H_ +#define BENCHMARK_CYCLECLOCK_H_ + +#include + +#include "benchmark/benchmark.h" +#include "internal_macros.h" + +#if defined(BENCHMARK_OS_MACOSX) +#include +#endif +// For MSVC, we want to use '_asm rdtsc' when possible (since it works +// with even ancient MSVC compilers), and when not possible the +// __rdtsc intrinsic, declared in . Unfortunately, in some +// environments, and have conflicting +// declarations of some other intrinsics, breaking compilation. +// Therefore, we simply declare __rdtsc ourselves. See also +// http://connect.microsoft.com/VisualStudio/feedback/details/262047 +#if defined(COMPILER_MSVC) && !defined(_M_IX86) +extern "C" uint64_t __rdtsc(); +#pragma intrinsic(__rdtsc) +#endif + +#ifndef BENCHMARK_OS_WINDOWS +#include +#include +#endif + +#ifdef BENCHMARK_OS_EMSCRIPTEN +#include +#endif + +namespace benchmark { +// NOTE: only i386 and x86_64 have been well tested. +// PPC, sparc, alpha, and ia64 are based on +// http://peter.kuscsik.com/wordpress/?p=14 +// with modifications by m3b. See also +// https://setisvn.ssl.berkeley.edu/svn/lib/fftw-3.0.1/kernel/cycle.h +namespace cycleclock { +// This should return the number of cycles since power-on. Thread-safe. +inline BENCHMARK_ALWAYS_INLINE int64_t Now() { +#if defined(BENCHMARK_OS_MACOSX) + // this goes at the top because we need ALL Macs, regardless of + // architecture, to return the number of "mach time units" that + // have passed since startup. See sysinfo.cc where + // InitializeSystemInfo() sets the supposed cpu clock frequency of + // macs to the number of mach time units per second, not actual + // CPU clock frequency (which can change in the face of CPU + // frequency scaling). Also note that when the Mac sleeps, this + // counter pauses; it does not continue counting, nor does it + // reset to zero. + return mach_absolute_time(); +#elif defined(BENCHMARK_OS_EMSCRIPTEN) + // this goes above x86-specific code because old versions of Emscripten + // define __x86_64__, although they have nothing to do with it. + return static_cast(emscripten_get_now() * 1e+6); +#elif defined(__i386__) + int64_t ret; + __asm__ volatile("rdtsc" : "=A"(ret)); + return ret; +#elif defined(__x86_64__) || defined(__amd64__) + uint64_t low, high; + __asm__ volatile("rdtsc" : "=a"(low), "=d"(high)); + return (high << 32) | low; +#elif defined(__powerpc__) || defined(__ppc__) + // This returns a time-base, which is not always precisely a cycle-count. + int64_t tbl, tbu0, tbu1; + asm("mftbu %0" : "=r"(tbu0)); + asm("mftb %0" : "=r"(tbl)); + asm("mftbu %0" : "=r"(tbu1)); + tbl &= -static_cast(tbu0 == tbu1); + // high 32 bits in tbu1; low 32 bits in tbl (tbu0 is garbage) + return (tbu1 << 32) | tbl; +#elif defined(__sparc__) + int64_t tick; + asm(".byte 0x83, 0x41, 0x00, 0x00"); + asm("mov %%g1, %0" : "=r"(tick)); + return tick; +#elif defined(__ia64__) + int64_t itc; + asm("mov %0 = ar.itc" : "=r"(itc)); + return itc; +#elif defined(COMPILER_MSVC) && defined(_M_IX86) + // Older MSVC compilers (like 7.x) don't seem to support the + // __rdtsc intrinsic properly, so I prefer to use _asm instead + // when I know it will work. Otherwise, I'll use __rdtsc and hope + // the code is being compiled with a non-ancient compiler. + _asm rdtsc +#elif defined(COMPILER_MSVC) + return __rdtsc(); +#elif defined(BENCHMARK_OS_NACL) + // Native Client validator on x86/x86-64 allows RDTSC instructions, + // and this case is handled above. Native Client validator on ARM + // rejects MRC instructions (used in the ARM-specific sequence below), + // so we handle it here. Portable Native Client compiles to + // architecture-agnostic bytecode, which doesn't provide any + // cycle counter access mnemonics. + + // Native Client does not provide any API to access cycle counter. + // Use clock_gettime(CLOCK_MONOTONIC, ...) instead of gettimeofday + // because is provides nanosecond resolution (which is noticable at + // least for PNaCl modules running on x86 Mac & Linux). + // Initialize to always return 0 if clock_gettime fails. + struct timespec ts = { 0, 0 }; + clock_gettime(CLOCK_MONOTONIC, &ts); + return static_cast(ts.tv_sec) * 1000000000 + ts.tv_nsec; +#elif defined(__aarch64__) + // System timer of ARMv8 runs at a different frequency than the CPU's. + // The frequency is fixed, typically in the range 1-50MHz. It can be + // read at CNTFRQ special register. We assume the OS has set up + // the virtual timer properly. + int64_t virtual_timer_value; + asm volatile("mrs %0, cntvct_el0" : "=r"(virtual_timer_value)); + return virtual_timer_value; +#elif defined(__ARM_ARCH) + // V6 is the earliest arch that has a standard cyclecount + // Native Client validator doesn't allow MRC instructions. +#if (__ARM_ARCH >= 6) + uint32_t pmccntr; + uint32_t pmuseren; + uint32_t pmcntenset; + // Read the user mode perf monitor counter access permissions. + asm volatile("mrc p15, 0, %0, c9, c14, 0" : "=r"(pmuseren)); + if (pmuseren & 1) { // Allows reading perfmon counters for user mode code. + asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r"(pmcntenset)); + if (pmcntenset & 0x80000000ul) { // Is it counting? + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r"(pmccntr)); + // The counter is set up to count every 64th cycle + return static_cast(pmccntr) * 64; // Should optimize to << 6 + } + } +#endif + struct timeval tv; + gettimeofday(&tv, nullptr); + return static_cast(tv.tv_sec) * 1000000 + tv.tv_usec; +#elif defined(__mips__) + // mips apparently only allows rdtsc for superusers, so we fall + // back to gettimeofday. It's possible clock_gettime would be better. + struct timeval tv; + gettimeofday(&tv, nullptr); + return static_cast(tv.tv_sec) * 1000000 + tv.tv_usec; +#else +// The soft failover to a generic implementation is automatic only for ARM. +// For other platforms the developer is expected to make an attempt to create +// a fast implementation and use generic version if nothing better is available. +#error You need to define CycleTimer for your OS and CPU +#endif +} +} // end namespace cycleclock +} // end namespace benchmark + +#endif // BENCHMARK_CYCLECLOCK_H_ diff --git a/src/internal_macros.h b/src/internal_macros.h new file mode 100644 index 0000000..9428874 --- /dev/null +++ b/src/internal_macros.h @@ -0,0 +1,57 @@ +#ifndef BENCHMARK_INTERNAL_MACROS_H_ +#define BENCHMARK_INTERNAL_MACROS_H_ + +#include "benchmark/benchmark.h" + +#ifndef __has_feature +#define __has_feature(x) 0 +#endif + +#if defined(__clang__) +#define COMPILER_CLANG +#elif defined(_MSC_VER) +#define COMPILER_MSVC +#elif defined(__GNUC__) +#define COMPILER_GCC +#endif + +#if __has_feature(cxx_attributes) +#define BENCHMARK_NORETURN [[noreturn]] +#elif defined(__GNUC__) +#define BENCHMARK_NORETURN __attribute__((noreturn)) +#elif defined(COMPILER_MSVC) +#define BENCHMARK_NORETURN __declspec(noreturn) +#else +#define BENCHMARK_NORETURN +#endif + +#if defined(__CYGWIN__) +#define BENCHMARK_OS_CYGWIN 1 +#elif defined(_WIN32) +#define BENCHMARK_OS_WINDOWS 1 +#elif defined(__APPLE__) +#include "TargetConditionals.h" + #if defined(TARGET_OS_MAC) + #define BENCHMARK_OS_MACOSX 1 + #if defined(TARGET_OS_IPHONE) + #define BENCHMARK_OS_IOS 1 + #endif + #endif +#elif defined(__FreeBSD__) +#define BENCHMARK_OS_FREEBSD 1 +#elif defined(__linux__) +#define BENCHMARK_OS_LINUX 1 +#elif defined(__native_client__) +#define BENCHMARK_OS_NACL 1 +#elif defined(EMSCRIPTEN) +#define BENCHMARK_OS_EMSCRIPTEN 1 +#elif defined(__rtems__) +#define BENCHMARK_OS_RTEMS 1 +#endif + +#if !__has_feature(cxx_exceptions) && !defined(__cpp_exceptions) \ + && !defined(__EXCEPTIONS) +#define BENCHMARK_HAS_NO_EXCEPTIONS +#endif + +#endif // BENCHMARK_INTERNAL_MACROS_H_ diff --git a/src/json_reporter.cc b/src/json_reporter.cc new file mode 100644 index 0000000..edf6ecc --- /dev/null +++ b/src/json_reporter.cc @@ -0,0 +1,168 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "benchmark/benchmark.h" +#include "complexity.h" + +#include +#include +#include +#include +#include +#include + +#include "string_util.h" +#include "timers.h" + +namespace benchmark { + +namespace { + +std::string FormatKV(std::string const& key, std::string const& value) { + return StringPrintF("\"%s\": \"%s\"", key.c_str(), value.c_str()); +} + +std::string FormatKV(std::string const& key, const char* value) { + return StringPrintF("\"%s\": \"%s\"", key.c_str(), value); +} + +std::string FormatKV(std::string const& key, bool value) { + return StringPrintF("\"%s\": %s", key.c_str(), value ? "true" : "false"); +} + +std::string FormatKV(std::string const& key, int64_t value) { + std::stringstream ss; + ss << '"' << key << "\": " << value; + return ss.str(); +} + +std::string FormatKV(std::string const& key, double value) { + return StringPrintF("\"%s\": %.2f", key.c_str(), value); +} + +int64_t RoundDouble(double v) { return static_cast(v + 0.5); } + +} // end namespace + +bool JSONReporter::ReportContext(const Context& context) { + std::ostream& out = GetOutputStream(); + + out << "{\n"; + std::string inner_indent(2, ' '); + + // Open context block and print context information. + out << inner_indent << "\"context\": {\n"; + std::string indent(4, ' '); + + std::string walltime_value = LocalDateTimeString(); + out << indent << FormatKV("date", walltime_value) << ",\n"; + + out << indent << FormatKV("num_cpus", static_cast(context.num_cpus)) + << ",\n"; + out << indent << FormatKV("mhz_per_cpu", RoundDouble(context.mhz_per_cpu)) + << ",\n"; + out << indent << FormatKV("cpu_scaling_enabled", context.cpu_scaling_enabled) + << ",\n"; + +#if defined(NDEBUG) + const char build_type[] = "release"; +#else + const char build_type[] = "debug"; +#endif + out << indent << FormatKV("library_build_type", build_type) << "\n"; + // Close context block and open the list of benchmarks. + out << inner_indent << "},\n"; + out << inner_indent << "\"benchmarks\": [\n"; + return true; +} + +void JSONReporter::ReportRuns(std::vector const& reports) { + if (reports.empty()) { + return; + } + std::string indent(4, ' '); + std::ostream& out = GetOutputStream(); + if (!first_report_) { + out << ",\n"; + } + first_report_ = false; + + for (auto it = reports.begin(); it != reports.end(); ++it) { + out << indent << "{\n"; + PrintRunData(*it); + out << indent << '}'; + auto it_cp = it; + if (++it_cp != reports.end()) { + out << ",\n"; + } + } +} + +void JSONReporter::Finalize() { + // Close the list of benchmarks and the top level object. + GetOutputStream() << "\n ]\n}\n"; +} + +void JSONReporter::PrintRunData(Run const& run) { + std::string indent(6, ' '); + std::ostream& out = GetOutputStream(); + out << indent << FormatKV("name", run.benchmark_name) << ",\n"; + if (run.error_occurred) { + out << indent << FormatKV("error_occurred", run.error_occurred) << ",\n"; + out << indent << FormatKV("error_message", run.error_message) << ",\n"; + } + if (!run.report_big_o && !run.report_rms) { + out << indent << FormatKV("iterations", run.iterations) << ",\n"; + out << indent + << FormatKV("real_time", RoundDouble(run.GetAdjustedRealTime())) + << ",\n"; + out << indent + << FormatKV("cpu_time", RoundDouble(run.GetAdjustedCPUTime())); + out << ",\n" + << indent << FormatKV("time_unit", GetTimeUnitString(run.time_unit)); + } else if (run.report_big_o) { + out << indent + << FormatKV("cpu_coefficient", RoundDouble(run.GetAdjustedCPUTime())) + << ",\n"; + out << indent + << FormatKV("real_coefficient", RoundDouble(run.GetAdjustedRealTime())) + << ",\n"; + out << indent << FormatKV("big_o", GetBigOString(run.complexity)) << ",\n"; + out << indent << FormatKV("time_unit", GetTimeUnitString(run.time_unit)); + } else if (run.report_rms) { + out << indent + << FormatKV("rms", run.GetAdjustedCPUTime()); + } + if (run.bytes_per_second > 0.0) { + out << ",\n" + << indent + << FormatKV("bytes_per_second", RoundDouble(run.bytes_per_second)); + } + if (run.items_per_second > 0.0) { + out << ",\n" + << indent + << FormatKV("items_per_second", RoundDouble(run.items_per_second)); + } + for(auto &c : run.counters) { + out << ",\n" + << indent + << FormatKV(c.first, RoundDouble(c.second)); + } + if (!run.report_label.empty()) { + out << ",\n" << indent << FormatKV("label", run.report_label); + } + out << '\n'; +} + +} // end namespace benchmark diff --git a/src/log.h b/src/log.h new file mode 100644 index 0000000..d06e103 --- /dev/null +++ b/src/log.h @@ -0,0 +1,73 @@ +#ifndef BENCHMARK_LOG_H_ +#define BENCHMARK_LOG_H_ + +#include +#include + +#include "benchmark/benchmark.h" + +namespace benchmark { +namespace internal { + +typedef std::basic_ostream&(EndLType)(std::basic_ostream&); + +class LogType { + friend LogType& GetNullLogInstance(); + friend LogType& GetErrorLogInstance(); + + // FIXME: Add locking to output. + template + friend LogType& operator<<(LogType&, Tp const&); + friend LogType& operator<<(LogType&, EndLType*); + + private: + LogType(std::ostream* out) : out_(out) {} + std::ostream* out_; + BENCHMARK_DISALLOW_COPY_AND_ASSIGN(LogType); +}; + +template +LogType& operator<<(LogType& log, Tp const& value) { + if (log.out_) { + *log.out_ << value; + } + return log; +} + +inline LogType& operator<<(LogType& log, EndLType* m) { + if (log.out_) { + *log.out_ << m; + } + return log; +} + +inline int& LogLevel() { + static int log_level = 0; + return log_level; +} + +inline LogType& GetNullLogInstance() { + static LogType log(nullptr); + return log; +} + +inline LogType& GetErrorLogInstance() { + static LogType log(&std::clog); + return log; +} + +inline LogType& GetLogInstanceForLevel(int level) { + if (level <= LogLevel()) { + return GetErrorLogInstance(); + } + return GetNullLogInstance(); +} + +} // end namespace internal +} // end namespace benchmark + +#define VLOG(x) \ + (::benchmark::internal::GetLogInstanceForLevel(x) << "-- LOG(" << x << "):" \ + " ") + +#endif diff --git a/src/mutex.h b/src/mutex.h new file mode 100644 index 0000000..5f461d0 --- /dev/null +++ b/src/mutex.h @@ -0,0 +1,155 @@ +#ifndef BENCHMARK_MUTEX_H_ +#define BENCHMARK_MUTEX_H_ + +#include +#include + +#include "check.h" + +// Enable thread safety attributes only with clang. +// The attributes can be safely erased when compiling with other compilers. +#if defined(HAVE_THREAD_SAFETY_ATTRIBUTES) +#define THREAD_ANNOTATION_ATTRIBUTE__(x) __attribute__((x)) +#else +#define THREAD_ANNOTATION_ATTRIBUTE__(x) // no-op +#endif + +#define CAPABILITY(x) THREAD_ANNOTATION_ATTRIBUTE__(capability(x)) + +#define SCOPED_CAPABILITY THREAD_ANNOTATION_ATTRIBUTE__(scoped_lockable) + +#define GUARDED_BY(x) THREAD_ANNOTATION_ATTRIBUTE__(guarded_by(x)) + +#define PT_GUARDED_BY(x) THREAD_ANNOTATION_ATTRIBUTE__(pt_guarded_by(x)) + +#define ACQUIRED_BEFORE(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(acquired_before(__VA_ARGS__)) + +#define ACQUIRED_AFTER(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(acquired_after(__VA_ARGS__)) + +#define REQUIRES(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(requires_capability(__VA_ARGS__)) + +#define REQUIRES_SHARED(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(requires_shared_capability(__VA_ARGS__)) + +#define ACQUIRE(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(acquire_capability(__VA_ARGS__)) + +#define ACQUIRE_SHARED(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(acquire_shared_capability(__VA_ARGS__)) + +#define RELEASE(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(release_capability(__VA_ARGS__)) + +#define RELEASE_SHARED(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(release_shared_capability(__VA_ARGS__)) + +#define TRY_ACQUIRE(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(try_acquire_capability(__VA_ARGS__)) + +#define TRY_ACQUIRE_SHARED(...) \ + THREAD_ANNOTATION_ATTRIBUTE__(try_acquire_shared_capability(__VA_ARGS__)) + +#define EXCLUDES(...) THREAD_ANNOTATION_ATTRIBUTE__(locks_excluded(__VA_ARGS__)) + +#define ASSERT_CAPABILITY(x) THREAD_ANNOTATION_ATTRIBUTE__(assert_capability(x)) + +#define ASSERT_SHARED_CAPABILITY(x) \ + THREAD_ANNOTATION_ATTRIBUTE__(assert_shared_capability(x)) + +#define RETURN_CAPABILITY(x) THREAD_ANNOTATION_ATTRIBUTE__(lock_returned(x)) + +#define NO_THREAD_SAFETY_ANALYSIS \ + THREAD_ANNOTATION_ATTRIBUTE__(no_thread_safety_analysis) + +namespace benchmark { + +typedef std::condition_variable Condition; + +// NOTE: Wrappers for std::mutex and std::unique_lock are provided so that +// we can annotate them with thread safety attributes and use the +// -Wthread-safety warning with clang. The standard library types cannot be +// used directly because they do not provided the required annotations. +class CAPABILITY("mutex") Mutex { + public: + Mutex() {} + + void lock() ACQUIRE() { mut_.lock(); } + void unlock() RELEASE() { mut_.unlock(); } + std::mutex& native_handle() { return mut_; } + + private: + std::mutex mut_; +}; + +class SCOPED_CAPABILITY MutexLock { + typedef std::unique_lock MutexLockImp; + + public: + MutexLock(Mutex& m) ACQUIRE(m) : ml_(m.native_handle()) {} + ~MutexLock() RELEASE() {} + MutexLockImp& native_handle() { return ml_; } + + private: + MutexLockImp ml_; +}; + +class Barrier { + public: + Barrier(int num_threads) : running_threads_(num_threads) {} + + // Called by each thread + bool wait() EXCLUDES(lock_) { + bool last_thread = false; + { + MutexLock ml(lock_); + last_thread = createBarrier(ml); + } + if (last_thread) phase_condition_.notify_all(); + return last_thread; + } + + void removeThread() EXCLUDES(lock_) { + MutexLock ml(lock_); + --running_threads_; + if (entered_ != 0) phase_condition_.notify_all(); + } + + private: + Mutex lock_; + Condition phase_condition_; + int running_threads_; + + // State for barrier management + int phase_number_ = 0; + int entered_ = 0; // Number of threads that have entered this barrier + + // Enter the barrier and wait until all other threads have also + // entered the barrier. Returns iff this is the last thread to + // enter the barrier. + bool createBarrier(MutexLock& ml) REQUIRES(lock_) { + CHECK_LT(entered_, running_threads_); + entered_++; + if (entered_ < running_threads_) { + // Wait for all threads to enter + int phase_number_cp = phase_number_; + auto cb = [this, phase_number_cp]() { + return this->phase_number_ > phase_number_cp || + entered_ == running_threads_; // A thread has aborted in error + }; + phase_condition_.wait(ml.native_handle(), cb); + if (phase_number_ > phase_number_cp) return false; + // else (running_threads_ == entered_) and we are the last thread. + } + // Last thread has reached the barrier + phase_number_++; + entered_ = 0; + return true; + } +}; + +} // end namespace benchmark + +#endif // BENCHMARK_MUTEX_H_ diff --git a/src/re.h b/src/re.h new file mode 100644 index 0000000..01e9736 --- /dev/null +++ b/src/re.h @@ -0,0 +1,140 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#ifndef BENCHMARK_RE_H_ +#define BENCHMARK_RE_H_ + +#include "internal_macros.h" + +// Prefer C regex libraries when compiling w/o exceptions so that we can +// correctly report errors. +#if defined(BENCHMARK_HAS_NO_EXCEPTIONS) && defined(HAVE_STD_REGEX) && \ + (defined(HAVE_GNU_POSIX_REGEX) || defined(HAVE_POSIX_REGEX)) +#undef HAVE_STD_REGEX +#endif + +#if defined(HAVE_STD_REGEX) +#include +#elif defined(HAVE_GNU_POSIX_REGEX) +#include +#elif defined(HAVE_POSIX_REGEX) +#include +#else +#error No regular expression backend was found! +#endif +#include + +#include "check.h" + +namespace benchmark { + +// A wrapper around the POSIX regular expression API that provides automatic +// cleanup +class Regex { + public: + Regex() : init_(false) {} + + ~Regex(); + + // Compile a regular expression matcher from spec. Returns true on success. + // + // On failure (and if error is not nullptr), error is populated with a human + // readable error message if an error occurs. + bool Init(const std::string& spec, std::string* error); + + // Returns whether str matches the compiled regular expression. + bool Match(const std::string& str); + + private: + bool init_; +// Underlying regular expression object +#if defined(HAVE_STD_REGEX) + std::regex re_; +#elif defined(HAVE_POSIX_REGEX) || defined(HAVE_GNU_POSIX_REGEX) + regex_t re_; +#else +#error No regular expression backend implementation available +#endif +}; + +#if defined(HAVE_STD_REGEX) + +inline bool Regex::Init(const std::string& spec, std::string* error) { +#ifdef BENCHMARK_HAS_NO_EXCEPTIONS + ((void)error); // suppress unused warning +#else + try { +#endif + re_ = std::regex(spec, std::regex_constants::extended); + init_ = true; +#ifndef BENCHMARK_HAS_NO_EXCEPTIONS + } catch (const std::regex_error& e) { + if (error) { + *error = e.what(); + } + } +#endif + return init_; +} + +inline Regex::~Regex() {} + +inline bool Regex::Match(const std::string& str) { + if (!init_) { + return false; + } + return std::regex_search(str, re_); +} + +#else +inline bool Regex::Init(const std::string& spec, std::string* error) { + int ec = regcomp(&re_, spec.c_str(), REG_EXTENDED | REG_NOSUB); + if (ec != 0) { + if (error) { + size_t needed = regerror(ec, &re_, nullptr, 0); + char* errbuf = new char[needed]; + regerror(ec, &re_, errbuf, needed); + + // regerror returns the number of bytes necessary to null terminate + // the string, so we move that when assigning to error. + CHECK_NE(needed, 0); + error->assign(errbuf, needed - 1); + + delete[] errbuf; + } + + return false; + } + + init_ = true; + return true; +} + +inline Regex::~Regex() { + if (init_) { + regfree(&re_); + } +} + +inline bool Regex::Match(const std::string& str) { + if (!init_) { + return false; + } + return regexec(&re_, str.c_str(), 0, nullptr, 0) == 0; +} +#endif + +} // end namespace benchmark + +#endif // BENCHMARK_RE_H_ diff --git a/src/reporter.cc b/src/reporter.cc new file mode 100644 index 0000000..aacd453 --- /dev/null +++ b/src/reporter.cc @@ -0,0 +1,68 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "benchmark/benchmark.h" +#include "timers.h" + +#include + +#include +#include +#include + +#include "check.h" +#include "stat.h" + +namespace benchmark { + +BenchmarkReporter::BenchmarkReporter() + : output_stream_(&std::cout), error_stream_(&std::cerr) {} + +BenchmarkReporter::~BenchmarkReporter() {} + +void BenchmarkReporter::PrintBasicContext(std::ostream *out, + Context const &context) { + CHECK(out) << "cannot be null"; + auto &Out = *out; + + Out << "Run on (" << context.num_cpus << " X " << context.mhz_per_cpu + << " MHz CPU " << ((context.num_cpus > 1) ? "s" : "") << ")\n"; + + Out << LocalDateTimeString() << "\n"; + + if (context.cpu_scaling_enabled) { + Out << "***WARNING*** CPU scaling is enabled, the benchmark " + "real time measurements may be noisy and will incur extra " + "overhead.\n"; + } + +#ifndef NDEBUG + Out << "***WARNING*** Library was built as DEBUG. Timings may be " + "affected.\n"; +#endif +} + +double BenchmarkReporter::Run::GetAdjustedRealTime() const { + double new_time = real_accumulated_time * GetTimeUnitMultiplier(time_unit); + if (iterations != 0) new_time /= static_cast(iterations); + return new_time; +} + +double BenchmarkReporter::Run::GetAdjustedCPUTime() const { + double new_time = cpu_accumulated_time * GetTimeUnitMultiplier(time_unit); + if (iterations != 0) new_time /= static_cast(iterations); + return new_time; +} + +} // end namespace benchmark diff --git a/src/sleep.cc b/src/sleep.cc new file mode 100644 index 0000000..54aa04a --- /dev/null +++ b/src/sleep.cc @@ -0,0 +1,51 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "sleep.h" + +#include +#include +#include + +#include "internal_macros.h" + +#ifdef BENCHMARK_OS_WINDOWS +#include +#endif + +namespace benchmark { +#ifdef BENCHMARK_OS_WINDOWS +// Window's Sleep takes milliseconds argument. +void SleepForMilliseconds(int milliseconds) { Sleep(milliseconds); } +void SleepForSeconds(double seconds) { + SleepForMilliseconds(static_cast(kNumMillisPerSecond * seconds)); +} +#else // BENCHMARK_OS_WINDOWS +void SleepForMicroseconds(int microseconds) { + struct timespec sleep_time; + sleep_time.tv_sec = microseconds / kNumMicrosPerSecond; + sleep_time.tv_nsec = (microseconds % kNumMicrosPerSecond) * kNumNanosPerMicro; + while (nanosleep(&sleep_time, &sleep_time) != 0 && errno == EINTR) + ; // Ignore signals and wait for the full interval to elapse. +} + +void SleepForMilliseconds(int milliseconds) { + SleepForMicroseconds(milliseconds * kNumMicrosPerMilli); +} + +void SleepForSeconds(double seconds) { + SleepForMicroseconds(static_cast(seconds * kNumMicrosPerSecond)); +} +#endif // BENCHMARK_OS_WINDOWS +} // end namespace benchmark diff --git a/src/sleep.h b/src/sleep.h new file mode 100644 index 0000000..f98551a --- /dev/null +++ b/src/sleep.h @@ -0,0 +1,15 @@ +#ifndef BENCHMARK_SLEEP_H_ +#define BENCHMARK_SLEEP_H_ + +namespace benchmark { +const int kNumMillisPerSecond = 1000; +const int kNumMicrosPerMilli = 1000; +const int kNumMicrosPerSecond = kNumMillisPerSecond * 1000; +const int kNumNanosPerMicro = 1000; +const int kNumNanosPerSecond = kNumNanosPerMicro * kNumMicrosPerSecond; + +void SleepForMilliseconds(int milliseconds); +void SleepForSeconds(double seconds); +} // end namespace benchmark + +#endif // BENCHMARK_SLEEP_H_ diff --git a/src/stat.h b/src/stat.h new file mode 100644 index 0000000..d356875 --- /dev/null +++ b/src/stat.h @@ -0,0 +1,310 @@ +#ifndef BENCHMARK_STAT_H_ +#define BENCHMARK_STAT_H_ + +#include +#include +#include +#include + +namespace benchmark { + +template +class Stat1; + +template +class Stat1MinMax; + +typedef Stat1 Stat1_f; +typedef Stat1 Stat1_d; +typedef Stat1MinMax Stat1MinMax_f; +typedef Stat1MinMax Stat1MinMax_d; + +template +class Vector2; +template +class Vector3; +template +class Vector4; + +template +class Stat1 { + public: + typedef Stat1 Self; + + Stat1() { Clear(); } + // Create a sample of value dat and weight 1 + explicit Stat1(const VType &dat) { + sum_ = dat; + sum_squares_ = Sqr(dat); + numsamples_ = 1; + } + // Create statistics for all the samples between begin (included) + // and end(excluded) + explicit Stat1(const VType *begin, const VType *end) { + Clear(); + for (const VType *item = begin; item < end; ++item) { + (*this) += Stat1(*item); + } + } + // Create a sample of value dat and weight w + Stat1(const VType &dat, const NumType &w) { + sum_ = w * dat; + sum_squares_ = w * Sqr(dat); + numsamples_ = w; + } + // Copy operator + Stat1(const Self &stat) { + sum_ = stat.sum_; + sum_squares_ = stat.sum_squares_; + numsamples_ = stat.numsamples_; + } + + void Clear() { + numsamples_ = NumType(); + sum_squares_ = sum_ = VType(); + } + + Self &operator=(const Self &stat) { + sum_ = stat.sum_; + sum_squares_ = stat.sum_squares_; + numsamples_ = stat.numsamples_; + return (*this); + } + // Merge statistics from two sample sets. + Self &operator+=(const Self &stat) { + sum_ += stat.sum_; + sum_squares_ += stat.sum_squares_; + numsamples_ += stat.numsamples_; + return (*this); + } + // The operation opposite to += + Self &operator-=(const Self &stat) { + sum_ -= stat.sum_; + sum_squares_ -= stat.sum_squares_; + numsamples_ -= stat.numsamples_; + return (*this); + } + // Multiply the weight of the set of samples by a factor k + Self &operator*=(const VType &k) { + sum_ *= k; + sum_squares_ *= k; + numsamples_ *= k; + return (*this); + } + + // Merge statistics from two sample sets. + Self operator+(const Self &stat) const { return Self(*this) += stat; } + + // The operation opposite to + + Self operator-(const Self &stat) const { return Self(*this) -= stat; } + + // Multiply the weight of the set of samples by a factor k + Self operator*(const VType &k) const { return Self(*this) *= k; } + + // Return the total weight of this sample set + NumType numSamples() const { return numsamples_; } + + // Return the sum of this sample set + VType Sum() const { return sum_; } + + // Return the mean of this sample set + VType Mean() const { + if (numsamples_ == 0) return VType(); + return sum_ * (1.0 / numsamples_); + } + + // Return the mean of this sample set and compute the standard deviation at + // the same time. + VType Mean(VType *stddev) const { + if (numsamples_ == 0) return VType(); + VType mean = sum_ * (1.0 / numsamples_); + if (stddev) { + // Sample standard deviation is undefined for n = 1 + if (numsamples_ == 1) { + *stddev = VType(); + } else { + VType avg_squares = sum_squares_ * (1.0 / numsamples_); + *stddev = Sqrt(numsamples_ / (numsamples_ - 1.0) * (avg_squares - Sqr(mean))); + } + } + return mean; + } + + // Return the standard deviation of the sample set + VType StdDev() const { + VType stddev = VType(); + Mean(&stddev); + return stddev; + } + + private: + static_assert(std::is_integral::value && + !std::is_same::value, + "NumType must be an integral type that is not bool."); + // Let i be the index of the samples provided (using +=) + // and weight[i],value[i] be the data of sample #i + // then the variables have the following meaning: + NumType numsamples_; // sum of weight[i]; + VType sum_; // sum of weight[i]*value[i]; + VType sum_squares_; // sum of weight[i]*value[i]^2; + + // Template function used to square a number. + // For a vector we square all components + template + static inline SType Sqr(const SType &dat) { + return dat * dat; + } + + template + static inline Vector2 Sqr(const Vector2 &dat) { + return dat.MulComponents(dat); + } + + template + static inline Vector3 Sqr(const Vector3 &dat) { + return dat.MulComponents(dat); + } + + template + static inline Vector4 Sqr(const Vector4 &dat) { + return dat.MulComponents(dat); + } + + // Template function used to take the square root of a number. + // For a vector we square all components + template + static inline SType Sqrt(const SType &dat) { + // Avoid NaN due to imprecision in the calculations + if (dat < 0) return 0; + return sqrt(dat); + } + + template + static inline Vector2 Sqrt(const Vector2 &dat) { + // Avoid NaN due to imprecision in the calculations + return Max(dat, Vector2()).Sqrt(); + } + + template + static inline Vector3 Sqrt(const Vector3 &dat) { + // Avoid NaN due to imprecision in the calculations + return Max(dat, Vector3()).Sqrt(); + } + + template + static inline Vector4 Sqrt(const Vector4 &dat) { + // Avoid NaN due to imprecision in the calculations + return Max(dat, Vector4()).Sqrt(); + } +}; + +// Useful printing function +template +std::ostream &operator<<(std::ostream &out, const Stat1 &s) { + out << "{ avg = " << s.Mean() << " std = " << s.StdDev() + << " nsamples = " << s.NumSamples() << "}"; + return out; +} + +// Stat1MinMax: same as Stat1, but it also +// keeps the Min and Max values; the "-" +// operator is disabled because it cannot be implemented +// efficiently +template +class Stat1MinMax : public Stat1 { + public: + typedef Stat1MinMax Self; + + Stat1MinMax() { Clear(); } + // Create a sample of value dat and weight 1 + explicit Stat1MinMax(const VType &dat) : Stat1(dat) { + max_ = dat; + min_ = dat; + } + // Create statistics for all the samples between begin (included) + // and end(excluded) + explicit Stat1MinMax(const VType *begin, const VType *end) { + Clear(); + for (const VType *item = begin; item < end; ++item) { + (*this) += Stat1MinMax(*item); + } + } + // Create a sample of value dat and weight w + Stat1MinMax(const VType &dat, const NumType &w) + : Stat1(dat, w) { + max_ = dat; + min_ = dat; + } + // Copy operator + Stat1MinMax(const Self &stat) : Stat1(stat) { + max_ = stat.max_; + min_ = stat.min_; + } + + void Clear() { + Stat1::Clear(); + if (std::numeric_limits::has_infinity) { + min_ = std::numeric_limits::infinity(); + max_ = -std::numeric_limits::infinity(); + } else { + min_ = std::numeric_limits::max(); + max_ = std::numeric_limits::min(); + } + } + + Self &operator=(const Self &stat) { + this->Stat1::operator=(stat); + max_ = stat.max_; + min_ = stat.min_; + return (*this); + } + // Merge statistics from two sample sets. + Self &operator+=(const Self &stat) { + this->Stat1::operator+=(stat); + if (stat.max_ > max_) max_ = stat.max_; + if (stat.min_ < min_) min_ = stat.min_; + return (*this); + } + // Multiply the weight of the set of samples by a factor k + Self &operator*=(const VType &stat) { + this->Stat1::operator*=(stat); + return (*this); + } + // Merge statistics from two sample sets. + Self operator+(const Self &stat) const { return Self(*this) += stat; } + // Multiply the weight of the set of samples by a factor k + Self operator*(const VType &k) const { return Self(*this) *= k; } + + // Return the maximal value in this sample set + VType Max() const { return max_; } + // Return the minimal value in this sample set + VType Min() const { return min_; } + + private: + // The - operation makes no sense with Min/Max + // unless we keep the full list of values (but we don't) + // make it private, and let it undefined so nobody can call it + Self &operator-=(const Self &stat); // senseless. let it undefined. + + // The operation opposite to - + Self operator-(const Self &stat) const; // senseless. let it undefined. + + // Let i be the index of the samples provided (using +=) + // and weight[i],value[i] be the data of sample #i + // then the variables have the following meaning: + VType max_; // max of value[i] + VType min_; // min of value[i] +}; + +// Useful printing function +template +std::ostream &operator<<(std::ostream &out, + const Stat1MinMax &s) { + out << "{ avg = " << s.Mean() << " std = " << s.StdDev() + << " nsamples = " << s.NumSamples() << " min = " << s.Min() + << " max = " << s.Max() << "}"; + return out; +} +} // end namespace benchmark + +#endif // BENCHMARK_STAT_H_ diff --git a/src/string_util.cc b/src/string_util.cc new file mode 100644 index 0000000..cd4e7cf --- /dev/null +++ b/src/string_util.cc @@ -0,0 +1,172 @@ +#include "string_util.h" + +#include +#include +#include +#include +#include +#include + +#include "arraysize.h" + +namespace benchmark { +namespace { + +// kilo, Mega, Giga, Tera, Peta, Exa, Zetta, Yotta. +const char kBigSIUnits[] = "kMGTPEZY"; +// Kibi, Mebi, Gibi, Tebi, Pebi, Exbi, Zebi, Yobi. +const char kBigIECUnits[] = "KMGTPEZY"; +// milli, micro, nano, pico, femto, atto, zepto, yocto. +const char kSmallSIUnits[] = "munpfazy"; + +// We require that all three arrays have the same size. +static_assert(arraysize(kBigSIUnits) == arraysize(kBigIECUnits), + "SI and IEC unit arrays must be the same size"); +static_assert(arraysize(kSmallSIUnits) == arraysize(kBigSIUnits), + "Small SI and Big SI unit arrays must be the same size"); + +static const int64_t kUnitsSize = arraysize(kBigSIUnits); + +} // end anonymous namespace + +void ToExponentAndMantissa(double val, double thresh, int precision, + double one_k, std::string* mantissa, + int64_t* exponent) { + std::stringstream mantissa_stream; + + if (val < 0) { + mantissa_stream << "-"; + val = -val; + } + + // Adjust threshold so that it never excludes things which can't be rendered + // in 'precision' digits. + const double adjusted_threshold = + std::max(thresh, 1.0 / std::pow(10.0, precision)); + const double big_threshold = adjusted_threshold * one_k; + const double small_threshold = adjusted_threshold; + // Values in ]simple_threshold,small_threshold[ will be printed as-is + const double simple_threshold = 0.01; + + if (val > big_threshold) { + // Positive powers + double scaled = val; + for (size_t i = 0; i < arraysize(kBigSIUnits); ++i) { + scaled /= one_k; + if (scaled <= big_threshold) { + mantissa_stream << scaled; + *exponent = i + 1; + *mantissa = mantissa_stream.str(); + return; + } + } + mantissa_stream << val; + *exponent = 0; + } else if (val < small_threshold) { + // Negative powers + if (val < simple_threshold) { + double scaled = val; + for (size_t i = 0; i < arraysize(kSmallSIUnits); ++i) { + scaled *= one_k; + if (scaled >= small_threshold) { + mantissa_stream << scaled; + *exponent = -static_cast(i + 1); + *mantissa = mantissa_stream.str(); + return; + } + } + } + mantissa_stream << val; + *exponent = 0; + } else { + mantissa_stream << val; + *exponent = 0; + } + *mantissa = mantissa_stream.str(); +} + +std::string ExponentToPrefix(int64_t exponent, bool iec) { + if (exponent == 0) return ""; + + const int64_t index = (exponent > 0 ? exponent - 1 : -exponent - 1); + if (index >= kUnitsSize) return ""; + + const char* array = + (exponent > 0 ? (iec ? kBigIECUnits : kBigSIUnits) : kSmallSIUnits); + if (iec) + return array[index] + std::string("i"); + else + return std::string(1, array[index]); +} + +std::string ToBinaryStringFullySpecified(double value, double threshold, + int precision) { + std::string mantissa; + int64_t exponent; + ToExponentAndMantissa(value, threshold, precision, 1024.0, &mantissa, + &exponent); + return mantissa + ExponentToPrefix(exponent, false); +} + +void AppendHumanReadable(int n, std::string* str) { + std::stringstream ss; + // Round down to the nearest SI prefix. + ss << ToBinaryStringFullySpecified(n, 1.0, 0); + *str += ss.str(); +} + +std::string HumanReadableNumber(double n) { + // 1.1 means that figures up to 1.1k should be shown with the next unit down; + // this softens edge effects. + // 1 means that we should show one decimal place of precision. + return ToBinaryStringFullySpecified(n, 1.1, 1); +} + +std::string StringPrintFImp(const char* msg, va_list args) { + // we might need a second shot at this, so pre-emptivly make a copy + va_list args_cp; + va_copy(args_cp, args); + + // TODO(ericwf): use std::array for first attempt to avoid one memory + // allocation guess what the size might be + std::array local_buff; + std::size_t size = local_buff.size(); + // 2015-10-08: vsnprintf is used instead of snd::vsnprintf due to a limitation + // in the android-ndk + auto ret = vsnprintf(local_buff.data(), size, msg, args_cp); + + va_end(args_cp); + + // handle empty expansion + if (ret == 0) return std::string{}; + if (static_cast(ret) < size) + return std::string(local_buff.data()); + + // we did not provide a long enough buffer on our first attempt. + // add 1 to size to account for null-byte in size cast to prevent overflow + size = static_cast(ret) + 1; + auto buff_ptr = std::unique_ptr(new char[size]); + // 2015-10-08: vsnprintf is used instead of snd::vsnprintf due to a limitation + // in the android-ndk + ret = vsnprintf(buff_ptr.get(), size, msg, args); + return std::string(buff_ptr.get()); +} + +std::string StringPrintF(const char* format, ...) { + va_list args; + va_start(args, format); + std::string tmp = StringPrintFImp(format, args); + va_end(args); + return tmp; +} + +void ReplaceAll(std::string* str, const std::string& from, + const std::string& to) { + std::size_t start = 0; + while ((start = str->find(from, start)) != std::string::npos) { + str->replace(start, from.length(), to); + start += to.length(); + } +} + +} // end namespace benchmark diff --git a/src/string_util.h b/src/string_util.h new file mode 100644 index 0000000..0b190b9 --- /dev/null +++ b/src/string_util.h @@ -0,0 +1,40 @@ +#ifndef BENCHMARK_STRING_UTIL_H_ +#define BENCHMARK_STRING_UTIL_H_ + +#include +#include +#include +#include "internal_macros.h" + +namespace benchmark { + +void AppendHumanReadable(int n, std::string* str); + +std::string HumanReadableNumber(double n); + +std::string StringPrintF(const char* format, ...); + +inline std::ostream& StringCatImp(std::ostream& out) BENCHMARK_NOEXCEPT { + return out; +} + +template +inline std::ostream& StringCatImp(std::ostream& out, First&& f, + Rest&&... rest) { + out << std::forward(f); + return StringCatImp(out, std::forward(rest)...); +} + +template +inline std::string StrCat(Args&&... args) { + std::ostringstream ss; + StringCatImp(ss, std::forward(args)...); + return ss.str(); +} + +void ReplaceAll(std::string* str, const std::string& from, + const std::string& to); + +} // end namespace benchmark + +#endif // BENCHMARK_STRING_UTIL_H_ diff --git a/src/sysinfo.cc b/src/sysinfo.cc new file mode 100644 index 0000000..7feb79e --- /dev/null +++ b/src/sysinfo.cc @@ -0,0 +1,355 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "sysinfo.h" +#include "internal_macros.h" + +#ifdef BENCHMARK_OS_WINDOWS +#include +#include +#include +#else +#include +#include +#include +#include // this header must be included before 'sys/sysctl.h' to avoid compilation error on FreeBSD +#include +#if defined BENCHMARK_OS_FREEBSD || defined BENCHMARK_OS_MACOSX +#include +#endif +#endif + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arraysize.h" +#include "check.h" +#include "cycleclock.h" +#include "internal_macros.h" +#include "log.h" +#include "sleep.h" +#include "string_util.h" + +namespace benchmark { +namespace { +std::once_flag cpuinfo_init; +double cpuinfo_cycles_per_second = 1.0; +int cpuinfo_num_cpus = 1; // Conservative guess + +#if !defined BENCHMARK_OS_MACOSX +const int64_t estimate_time_ms = 1000; + +// Helper function estimates cycles/sec by observing cycles elapsed during +// sleep(). Using small sleep time decreases accuracy significantly. +int64_t EstimateCyclesPerSecond() { + const int64_t start_ticks = cycleclock::Now(); + SleepForMilliseconds(estimate_time_ms); + return cycleclock::Now() - start_ticks; +} +#endif + +#if defined BENCHMARK_OS_LINUX || defined BENCHMARK_OS_CYGWIN +// Helper function for reading an int from a file. Returns true if successful +// and the memory location pointed to by value is set to the value read. +bool ReadIntFromFile(const char* file, long* value) { + bool ret = false; + int fd = open(file, O_RDONLY); + if (fd != -1) { + char line[1024]; + char* err; + memset(line, '\0', sizeof(line)); + ssize_t read_err = read(fd, line, sizeof(line) - 1); + ((void)read_err); // prevent unused warning + CHECK(read_err >= 0); + const long temp_value = strtol(line, &err, 10); + if (line[0] != '\0' && (*err == '\n' || *err == '\0')) { + *value = temp_value; + ret = true; + } + close(fd); + } + return ret; +} +#endif + +#if defined BENCHMARK_OS_LINUX || defined BENCHMARK_OS_CYGWIN +static std::string convertToLowerCase(std::string s) { + for (auto& ch : s) + ch = std::tolower(ch); + return s; +} +static bool startsWithKey(std::string Value, std::string Key, + bool IgnoreCase = true) { + if (IgnoreCase) { + Key = convertToLowerCase(std::move(Key)); + Value = convertToLowerCase(std::move(Value)); + } + return Value.compare(0, Key.size(), Key) == 0; +} +#endif + +void InitializeSystemInfo() { +#if defined BENCHMARK_OS_LINUX || defined BENCHMARK_OS_CYGWIN + char line[1024]; + char* err; + long freq; + + bool saw_mhz = false; + + // If the kernel is exporting the tsc frequency use that. There are issues + // where cpuinfo_max_freq cannot be relied on because the BIOS may be + // exporintg an invalid p-state (on x86) or p-states may be used to put the + // processor in a new mode (turbo mode). Essentially, those frequencies + // cannot always be relied upon. The same reasons apply to /proc/cpuinfo as + // well. + if (!saw_mhz && + ReadIntFromFile("/sys/devices/system/cpu/cpu0/tsc_freq_khz", &freq)) { + // The value is in kHz (as the file name suggests). For example, on a + // 2GHz warpstation, the file contains the value "2000000". + cpuinfo_cycles_per_second = freq * 1000.0; + saw_mhz = true; + } + + // If CPU scaling is in effect, we want to use the *maximum* frequency, + // not whatever CPU speed some random processor happens to be using now. + if (!saw_mhz && + ReadIntFromFile("/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", + &freq)) { + // The value is in kHz. For example, on a 2GHz warpstation, the file + // contains the value "2000000". + cpuinfo_cycles_per_second = freq * 1000.0; + saw_mhz = true; + } + + // Read /proc/cpuinfo for other values, and if there is no cpuinfo_max_freq. + const char* pname = "/proc/cpuinfo"; + int fd = open(pname, O_RDONLY); + if (fd == -1) { + perror(pname); + if (!saw_mhz) { + cpuinfo_cycles_per_second = + static_cast(EstimateCyclesPerSecond()); + } + return; + } + + double bogo_clock = 1.0; + bool saw_bogo = false; + long max_cpu_id = 0; + int num_cpus = 0; + line[0] = line[1] = '\0'; + size_t chars_read = 0; + do { // we'll exit when the last read didn't read anything + // Move the next line to the beginning of the buffer + const size_t oldlinelen = strlen(line); + if (sizeof(line) == oldlinelen + 1) // oldlinelen took up entire line + line[0] = '\0'; + else // still other lines left to save + memmove(line, line + oldlinelen + 1, sizeof(line) - (oldlinelen + 1)); + // Terminate the new line, reading more if we can't find the newline + char* newline = strchr(line, '\n'); + if (newline == nullptr) { + const size_t linelen = strlen(line); + const size_t bytes_to_read = sizeof(line) - 1 - linelen; + CHECK(bytes_to_read > 0); // because the memmove recovered >=1 bytes + chars_read = read(fd, line + linelen, bytes_to_read); + line[linelen + chars_read] = '\0'; + newline = strchr(line, '\n'); + } + if (newline != nullptr) *newline = '\0'; + + // When parsing the "cpu MHz" and "bogomips" (fallback) entries, we only + // accept postive values. Some environments (virtual machines) report zero, + // which would cause infinite looping in WallTime_Init. + if (!saw_mhz && startsWithKey(line, "cpu MHz")) { + const char* freqstr = strchr(line, ':'); + if (freqstr) { + cpuinfo_cycles_per_second = strtod(freqstr + 1, &err) * 1000000.0; + if (freqstr[1] != '\0' && *err == '\0' && cpuinfo_cycles_per_second > 0) + saw_mhz = true; + } + } else if (startsWithKey(line, "bogomips")) { + const char* freqstr = strchr(line, ':'); + if (freqstr) { + bogo_clock = strtod(freqstr + 1, &err) * 1000000.0; + if (freqstr[1] != '\0' && *err == '\0' && bogo_clock > 0) + saw_bogo = true; + } + } else if (startsWithKey(line, "processor", /*IgnoreCase*/false)) { + // The above comparison is case-sensitive because ARM kernels often + // include a "Processor" line that tells you about the CPU, distinct + // from the usual "processor" lines that give you CPU ids. No current + // Linux architecture is using "Processor" for CPU ids. + num_cpus++; // count up every time we see an "processor :" entry + const char* id_str = strchr(line, ':'); + if (id_str) { + const long cpu_id = strtol(id_str + 1, &err, 10); + if (id_str[1] != '\0' && *err == '\0' && max_cpu_id < cpu_id) + max_cpu_id = cpu_id; + } + } + } while (chars_read > 0); + close(fd); + + if (!saw_mhz) { + if (saw_bogo) { + // If we didn't find anything better, we'll use bogomips, but + // we're not happy about it. + cpuinfo_cycles_per_second = bogo_clock; + } else { + // If we don't even have bogomips, we'll use the slow estimation. + cpuinfo_cycles_per_second = + static_cast(EstimateCyclesPerSecond()); + } + } + if (num_cpus == 0) { + fprintf(stderr, "Failed to read num. CPUs correctly from /proc/cpuinfo\n"); + } else { + if ((max_cpu_id + 1) != num_cpus) { + fprintf(stderr, + "CPU ID assignments in /proc/cpuinfo seem messed up." + " This is usually caused by a bad BIOS.\n"); + } + cpuinfo_num_cpus = num_cpus; + } + +#elif defined BENCHMARK_OS_FREEBSD +// For this sysctl to work, the machine must be configured without +// SMP, APIC, or APM support. hz should be 64-bit in freebsd 7.0 +// and later. Before that, it's a 32-bit quantity (and gives the +// wrong answer on machines faster than 2^32 Hz). See +// http://lists.freebsd.org/pipermail/freebsd-i386/2004-November/001846.html +// But also compare FreeBSD 7.0: +// http://fxr.watson.org/fxr/source/i386/i386/tsc.c?v=RELENG70#L223 +// 231 error = sysctl_handle_quad(oidp, &freq, 0, req); +// To FreeBSD 6.3 (it's the same in 6-STABLE): +// http://fxr.watson.org/fxr/source/i386/i386/tsc.c?v=RELENG6#L131 +// 139 error = sysctl_handle_int(oidp, &freq, sizeof(freq), req); +#if __FreeBSD__ >= 7 + uint64_t hz = 0; +#else + unsigned int hz = 0; +#endif + size_t sz = sizeof(hz); + const char* sysctl_path = "machdep.tsc_freq"; + if (sysctlbyname(sysctl_path, &hz, &sz, nullptr, 0) != 0) { + fprintf(stderr, "Unable to determine clock rate from sysctl: %s: %s\n", + sysctl_path, strerror(errno)); + cpuinfo_cycles_per_second = static_cast(EstimateCyclesPerSecond()); + } else { + cpuinfo_cycles_per_second = hz; + } +// TODO: also figure out cpuinfo_num_cpus + +#elif defined BENCHMARK_OS_WINDOWS + // In NT, read MHz from the registry. If we fail to do so or we're in win9x + // then make a crude estimate. + DWORD data, data_size = sizeof(data); + if (IsWindowsXPOrGreater() && + SUCCEEDED( + SHGetValueA(HKEY_LOCAL_MACHINE, + "HARDWARE\\DESCRIPTION\\System\\CentralProcessor\\0", + "~MHz", nullptr, &data, &data_size))) + cpuinfo_cycles_per_second = + static_cast((int64_t)data * (int64_t)(1000 * 1000)); // was mhz + else + cpuinfo_cycles_per_second = static_cast(EstimateCyclesPerSecond()); + + SYSTEM_INFO sysinfo; + // Use memset as opposed to = {} to avoid GCC missing initializer false + // positives. + std::memset(&sysinfo, 0, sizeof(SYSTEM_INFO)); + GetSystemInfo(&sysinfo); + cpuinfo_num_cpus = sysinfo.dwNumberOfProcessors; // number of logical + // processors in the current + // group + +#elif defined BENCHMARK_OS_MACOSX + int32_t num_cpus = 0; + size_t size = sizeof(num_cpus); + if (::sysctlbyname("hw.ncpu", &num_cpus, &size, nullptr, 0) == 0 && + (size == sizeof(num_cpus))) { + cpuinfo_num_cpus = num_cpus; + } else { + fprintf(stderr, "%s\n", strerror(errno)); + std::exit(EXIT_FAILURE); + } + int64_t cpu_freq = 0; + size = sizeof(cpu_freq); + if (::sysctlbyname("hw.cpufrequency", &cpu_freq, &size, nullptr, 0) == 0 && + (size == sizeof(cpu_freq))) { + cpuinfo_cycles_per_second = cpu_freq; + } else { + #if defined BENCHMARK_OS_IOS + fprintf(stderr, "CPU frequency cannot be detected. \n"); + cpuinfo_cycles_per_second = 0; + #else + fprintf(stderr, "%s\n", strerror(errno)); + std::exit(EXIT_FAILURE); + #endif + } +#else + // Generic cycles per second counter + cpuinfo_cycles_per_second = static_cast(EstimateCyclesPerSecond()); +#endif +} + +} // end namespace + +double CyclesPerSecond(void) { + std::call_once(cpuinfo_init, InitializeSystemInfo); + return cpuinfo_cycles_per_second; +} + +int NumCPUs(void) { + std::call_once(cpuinfo_init, InitializeSystemInfo); + return cpuinfo_num_cpus; +} + +// The ""'s catch people who don't pass in a literal for "str" +#define strliterallen(str) (sizeof("" str "") - 1) + +// Must use a string literal for prefix. +#define memprefix(str, len, prefix) \ + ((((len) >= strliterallen(prefix)) && \ + std::memcmp(str, prefix, strliterallen(prefix)) == 0) \ + ? str + strliterallen(prefix) \ + : nullptr) + +bool CpuScalingEnabled() { +#ifndef BENCHMARK_OS_WINDOWS + // On Linux, the CPUfreq subsystem exposes CPU information as files on the + // local file system. If reading the exported files fails, then we may not be + // running on Linux, so we silently ignore all the read errors. + for (int cpu = 0, num_cpus = NumCPUs(); cpu < num_cpus; ++cpu) { + std::string governor_file = + StrCat("/sys/devices/system/cpu/cpu", cpu, "/cpufreq/scaling_governor"); + FILE* file = fopen(governor_file.c_str(), "r"); + if (!file) break; + char buff[16]; + size_t bytes_read = fread(buff, 1, sizeof(buff), file); + fclose(file); + if (memprefix(buff, bytes_read, "performance") == nullptr) return true; + } +#endif + return false; +} + +} // end namespace benchmark diff --git a/src/sysinfo.h b/src/sysinfo.h new file mode 100644 index 0000000..c5d9916 --- /dev/null +++ b/src/sysinfo.h @@ -0,0 +1,10 @@ +#ifndef BENCHMARK_SYSINFO_H_ +#define BENCHMARK_SYSINFO_H_ + +namespace benchmark { +int NumCPUs(); +double CyclesPerSecond(); +bool CpuScalingEnabled(); +} // end namespace benchmark + +#endif // BENCHMARK_SYSINFO_H_ diff --git a/src/timers.cc b/src/timers.cc new file mode 100644 index 0000000..817272d --- /dev/null +++ b/src/timers.cc @@ -0,0 +1,212 @@ +// Copyright 2015 Google Inc. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "timers.h" +#include "internal_macros.h" + +#ifdef BENCHMARK_OS_WINDOWS +#include +#include +#include +#else +#include +#include +#include +#include // this header must be included before 'sys/sysctl.h' to avoid compilation error on FreeBSD +#include +#if defined BENCHMARK_OS_FREEBSD || defined BENCHMARK_OS_MACOSX +#include +#endif +#if defined(BENCHMARK_OS_MACOSX) +#include +#include +#include +#endif +#endif + +#ifdef BENCHMARK_OS_EMSCRIPTEN +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "check.h" +#include "log.h" +#include "sleep.h" +#include "string_util.h" + +namespace benchmark { + +// Suppress unused warnings on helper functions. +#if defined(__GNUC__) +#pragma GCC diagnostic ignored "-Wunused-function" +#endif + +namespace { +#if defined(BENCHMARK_OS_WINDOWS) +double MakeTime(FILETIME const& kernel_time, FILETIME const& user_time) { + ULARGE_INTEGER kernel; + ULARGE_INTEGER user; + kernel.HighPart = kernel_time.dwHighDateTime; + kernel.LowPart = kernel_time.dwLowDateTime; + user.HighPart = user_time.dwHighDateTime; + user.LowPart = user_time.dwLowDateTime; + return (static_cast(kernel.QuadPart) + + static_cast(user.QuadPart)) * + 1e-7; +} +#else +double MakeTime(struct rusage const& ru) { + return (static_cast(ru.ru_utime.tv_sec) + + static_cast(ru.ru_utime.tv_usec) * 1e-6 + + static_cast(ru.ru_stime.tv_sec) + + static_cast(ru.ru_stime.tv_usec) * 1e-6); +} +#endif +#if defined(BENCHMARK_OS_MACOSX) +double MakeTime(thread_basic_info_data_t const& info) { + return (static_cast(info.user_time.seconds) + + static_cast(info.user_time.microseconds) * 1e-6 + + static_cast(info.system_time.seconds) + + static_cast(info.system_time.microseconds) * 1e-6); +} +#endif +#if defined(CLOCK_PROCESS_CPUTIME_ID) || defined(CLOCK_THREAD_CPUTIME_ID) +double MakeTime(struct timespec const& ts) { + return ts.tv_sec + (static_cast(ts.tv_nsec) * 1e-9); +} +#endif + +BENCHMARK_NORETURN static void DiagnoseAndExit(const char* msg) { + std::cerr << "ERROR: " << msg << std::endl; + std::exit(EXIT_FAILURE); +} + +} // end namespace + +double ProcessCPUUsage() { +#if defined(BENCHMARK_OS_WINDOWS) + HANDLE proc = GetCurrentProcess(); + FILETIME creation_time; + FILETIME exit_time; + FILETIME kernel_time; + FILETIME user_time; + if (GetProcessTimes(proc, &creation_time, &exit_time, &kernel_time, + &user_time)) + return MakeTime(kernel_time, user_time); + DiagnoseAndExit("GetProccessTimes() failed"); +#elif defined(BENCHMARK_OS_EMSCRIPTEN) + // clock_gettime(CLOCK_PROCESS_CPUTIME_ID, ...) returns 0 on Emscripten. + // Use Emscripten-specific API. Reported CPU time would be exactly the + // same as total time, but this is ok because there aren't long-latency + // syncronous system calls in Emscripten. + return emscripten_get_now() * 1e-3; +#elif defined(CLOCK_PROCESS_CPUTIME_ID) && !defined(BENCHMARK_OS_MACOSX) + // FIXME We want to use clock_gettime, but its not available in MacOS 10.11. See + // https://github.com/google/benchmark/pull/292 + struct timespec spec; + if (clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &spec) == 0) + return MakeTime(spec); + DiagnoseAndExit("clock_gettime(CLOCK_PROCESS_CPUTIME_ID, ...) failed"); +#else + struct rusage ru; + if (getrusage(RUSAGE_SELF, &ru) == 0) return MakeTime(ru); + DiagnoseAndExit("getrusage(RUSAGE_SELF, ...) failed"); +#endif +} + +double ThreadCPUUsage() { +#if defined(BENCHMARK_OS_WINDOWS) + HANDLE this_thread = GetCurrentThread(); + FILETIME creation_time; + FILETIME exit_time; + FILETIME kernel_time; + FILETIME user_time; + GetThreadTimes(this_thread, &creation_time, &exit_time, &kernel_time, + &user_time); + return MakeTime(kernel_time, user_time); +#elif defined(BENCHMARK_OS_MACOSX) + // FIXME We want to use clock_gettime, but its not available in MacOS 10.11. See + // https://github.com/google/benchmark/pull/292 + mach_msg_type_number_t count = THREAD_BASIC_INFO_COUNT; + thread_basic_info_data_t info; + mach_port_t thread = pthread_mach_thread_np(pthread_self()); + if (thread_info(thread, THREAD_BASIC_INFO, (thread_info_t)&info, &count) == + KERN_SUCCESS) { + return MakeTime(info); + } + DiagnoseAndExit("ThreadCPUUsage() failed when evaluating thread_info"); +#elif defined(BENCHMARK_OS_EMSCRIPTEN) + // Emscripten doesn't support traditional threads + return ProcessCPUUsage(); +#elif defined(BENCHMARK_OS_RTEMS) + // RTEMS doesn't support CLOCK_THREAD_CPUTIME_ID. See + // https://github.com/RTEMS/rtems/blob/master/cpukit/posix/src/clockgettime.c + return ProcessCPUUsage(); +#elif defined(CLOCK_THREAD_CPUTIME_ID) + struct timespec ts; + if (clock_gettime(CLOCK_THREAD_CPUTIME_ID, &ts) == 0) return MakeTime(ts); + DiagnoseAndExit("clock_gettime(CLOCK_THREAD_CPUTIME_ID, ...) failed"); +#else +#error Per-thread timing is not available on your system. +#endif +} + +namespace { + +std::string DateTimeString(bool local) { + typedef std::chrono::system_clock Clock; + std::time_t now = Clock::to_time_t(Clock::now()); + const std::size_t kStorageSize = 128; + char storage[kStorageSize]; + std::size_t written; + + if (local) { +#if defined(BENCHMARK_OS_WINDOWS) + written = + std::strftime(storage, sizeof(storage), "%x %X", ::localtime(&now)); +#else + std::tm timeinfo; + std::memset(&timeinfo, 0, sizeof(std::tm)); + ::localtime_r(&now, &timeinfo); + written = std::strftime(storage, sizeof(storage), "%F %T", &timeinfo); +#endif + } else { +#if defined(BENCHMARK_OS_WINDOWS) + written = std::strftime(storage, sizeof(storage), "%x %X", ::gmtime(&now)); +#else + std::tm timeinfo; + std::memset(&timeinfo, 0, sizeof(std::tm)); + ::gmtime_r(&now, &timeinfo); + written = std::strftime(storage, sizeof(storage), "%F %T", &timeinfo); +#endif + } + CHECK(written < kStorageSize); + ((void)written); // prevent unused variable in optimized mode. + return std::string(storage); +} + +} // end namespace + +std::string LocalDateTimeString() { return DateTimeString(true); } + +} // end namespace benchmark diff --git a/src/timers.h b/src/timers.h new file mode 100644 index 0000000..65606cc --- /dev/null +++ b/src/timers.h @@ -0,0 +1,48 @@ +#ifndef BENCHMARK_TIMERS_H +#define BENCHMARK_TIMERS_H + +#include +#include + +namespace benchmark { + +// Return the CPU usage of the current process +double ProcessCPUUsage(); + +// Return the CPU usage of the children of the current process +double ChildrenCPUUsage(); + +// Return the CPU usage of the current thread +double ThreadCPUUsage(); + +#if defined(HAVE_STEADY_CLOCK) +template +struct ChooseSteadyClock { + typedef std::chrono::high_resolution_clock type; +}; + +template <> +struct ChooseSteadyClock { + typedef std::chrono::steady_clock type; +}; +#endif + +struct ChooseClockType { +#if defined(HAVE_STEADY_CLOCK) + typedef ChooseSteadyClock<>::type type; +#else + typedef std::chrono::high_resolution_clock type; +#endif +}; + +inline double ChronoClockNow() { + typedef ChooseClockType::type ClockType; + using FpSeconds = std::chrono::duration; + return FpSeconds(ClockType::now().time_since_epoch()).count(); +} + +std::string LocalDateTimeString(); + +} // end namespace benchmark + +#endif // BENCHMARK_TIMERS_H diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt new file mode 100644 index 0000000..b55612b --- /dev/null +++ b/test/CMakeLists.txt @@ -0,0 +1,170 @@ +# Enable the tests + +find_package(Threads REQUIRED) +include(CheckCXXCompilerFlag) + +# NOTE: Some tests use `` to perform the test. Therefore we must +# strip -DNDEBUG from the default CMake flags in DEBUG mode. +string(TOUPPER "${CMAKE_BUILD_TYPE}" uppercase_CMAKE_BUILD_TYPE) +if( NOT uppercase_CMAKE_BUILD_TYPE STREQUAL "DEBUG" ) + add_definitions( -UNDEBUG ) + add_definitions(-DTEST_BENCHMARK_LIBRARY_HAS_NO_ASSERTIONS) + # Also remove /D NDEBUG to avoid MSVC warnings about conflicting defines. + foreach (flags_var_to_scrub + CMAKE_CXX_FLAGS_RELEASE + CMAKE_CXX_FLAGS_RELWITHDEBINFO + CMAKE_CXX_FLAGS_MINSIZEREL + CMAKE_C_FLAGS_RELEASE + CMAKE_C_FLAGS_RELWITHDEBINFO + CMAKE_C_FLAGS_MINSIZEREL) + string (REGEX REPLACE "(^| )[/-]D *NDEBUG($| )" " " + "${flags_var_to_scrub}" "${${flags_var_to_scrub}}") + endforeach() +endif() + +# NOTE: These flags must be added after find_package(Threads REQUIRED) otherwise +# they will break the configuration check. +if (DEFINED BENCHMARK_CXX_LINKER_FLAGS) + list(APPEND CMAKE_EXE_LINKER_FLAGS ${BENCHMARK_CXX_LINKER_FLAGS}) +endif() + +add_library(output_test_helper STATIC output_test_helper.cc output_test.h) + +macro(compile_benchmark_test name) + add_executable(${name} "${name}.cc") + target_link_libraries(${name} benchmark ${CMAKE_THREAD_LIBS_INIT}) +endmacro(compile_benchmark_test) + + +macro(compile_output_test name) + add_executable(${name} "${name}.cc" output_test.h) + target_link_libraries(${name} output_test_helper benchmark + ${BENCHMARK_CXX_LIBRARIES} ${CMAKE_THREAD_LIBS_INIT}) +endmacro(compile_output_test) + + +# Demonstration executable +compile_benchmark_test(benchmark_test) +add_test(benchmark benchmark_test --benchmark_min_time=0.01) + +compile_benchmark_test(filter_test) +macro(add_filter_test name filter expect) + add_test(${name} filter_test --benchmark_min_time=0.01 --benchmark_filter=${filter} ${expect}) + add_test(${name}_list_only filter_test --benchmark_list_tests --benchmark_filter=${filter} ${expect}) +endmacro(add_filter_test) + +add_filter_test(filter_simple "Foo" 3) +add_filter_test(filter_suffix "BM_.*" 4) +add_filter_test(filter_regex_all ".*" 5) +add_filter_test(filter_regex_blank "" 5) +add_filter_test(filter_regex_none "monkey" 0) +add_filter_test(filter_regex_wildcard ".*Foo.*" 3) +add_filter_test(filter_regex_begin "^BM_.*" 4) +add_filter_test(filter_regex_begin2 "^N" 1) +add_filter_test(filter_regex_end ".*Ba$" 1) + +compile_benchmark_test(options_test) +add_test(options_benchmarks options_test --benchmark_min_time=0.01) + +compile_benchmark_test(basic_test) +add_test(basic_benchmark basic_test --benchmark_min_time=0.01) + +compile_benchmark_test(diagnostics_test) +add_test(diagnostics_test diagnostics_test --benchmark_min_time=0.01) + +compile_benchmark_test(skip_with_error_test) +add_test(skip_with_error_test skip_with_error_test --benchmark_min_time=0.01) + +compile_benchmark_test(donotoptimize_test) +# Some of the issues with DoNotOptimize only occur when optimization is enabled +check_cxx_compiler_flag(-O3 BENCHMARK_HAS_O3_FLAG) +if (BENCHMARK_HAS_O3_FLAG) + set_target_properties(donotoptimize_test PROPERTIES COMPILE_FLAGS "-O3") +endif() +add_test(donotoptimize_test donotoptimize_test --benchmark_min_time=0.01) + +compile_benchmark_test(fixture_test) +add_test(fixture_test fixture_test --benchmark_min_time=0.01) + +compile_benchmark_test(register_benchmark_test) +add_test(register_benchmark_test register_benchmark_test --benchmark_min_time=0.01) + +compile_benchmark_test(map_test) +add_test(map_test map_test --benchmark_min_time=0.01) + +compile_benchmark_test(multiple_ranges_test) +add_test(multiple_ranges_test multiple_ranges_test --benchmark_min_time=0.01) + +compile_output_test(reporter_output_test) +add_test(reporter_output_test reporter_output_test --benchmark_min_time=0.01) + +compile_output_test(user_counters_test) +add_test(user_counters_test user_counters_test --benchmark_min_time=0.01) + +compile_output_test(user_counters_tabular_test) +add_test(user_counters_tabular_test user_counters_tabular_test --benchmark_counters_tabular=true --benchmark_min_time=0.01) + +check_cxx_compiler_flag(-std=c++03 BENCHMARK_HAS_CXX03_FLAG) +if (BENCHMARK_HAS_CXX03_FLAG) + set(CXX03_FLAGS "${CMAKE_CXX_FLAGS}") + string(REPLACE "-std=c++11" "-std=c++03" CXX03_FLAGS "${CXX03_FLAGS}") + string(REPLACE "-std=c++0x" "-std=c++03" CXX03_FLAGS "${CXX03_FLAGS}") + + compile_benchmark_test(cxx03_test) + set_target_properties(cxx03_test + PROPERTIES COMPILE_FLAGS "${CXX03_FLAGS}") + add_test(cxx03 cxx03_test --benchmark_min_time=0.01) +endif() + +# Attempt to work around flaky test failures when running on Appveyor servers. +if (DEFINED ENV{APPVEYOR}) + set(COMPLEXITY_MIN_TIME "0.5") +else() + set(COMPLEXITY_MIN_TIME "0.01") +endif() +compile_output_test(complexity_test) +add_test(complexity_benchmark complexity_test --benchmark_min_time=${COMPLEXITY_MIN_TIME}) + +# Add the coverage command(s) +if(CMAKE_BUILD_TYPE) + string(TOLOWER ${CMAKE_BUILD_TYPE} CMAKE_BUILD_TYPE_LOWER) +endif() +if (${CMAKE_BUILD_TYPE_LOWER} MATCHES "coverage") + find_program(GCOV gcov) + find_program(LCOV lcov) + find_program(GENHTML genhtml) + find_program(CTEST ctest) + if (GCOV AND LCOV AND GENHTML AND CTEST AND HAVE_CXX_FLAG_COVERAGE) + add_custom_command( + OUTPUT ${CMAKE_BINARY_DIR}/lcov/index.html + COMMAND ${LCOV} -q -z -d . + COMMAND ${LCOV} -q --no-external -c -b "${CMAKE_SOURCE_DIR}" -d . -o before.lcov -i + COMMAND ${CTEST} --force-new-ctest-process + COMMAND ${LCOV} -q --no-external -c -b "${CMAKE_SOURCE_DIR}" -d . -o after.lcov + COMMAND ${LCOV} -q -a before.lcov -a after.lcov --output-file final.lcov + COMMAND ${LCOV} -q -r final.lcov "'${CMAKE_SOURCE_DIR}/test/*'" -o final.lcov + COMMAND ${GENHTML} final.lcov -o lcov --demangle-cpp --sort -p "${CMAKE_BINARY_DIR}" -t benchmark + DEPENDS filter_test benchmark_test options_test basic_test fixture_test cxx03_test complexity_test + WORKING_DIRECTORY ${CMAKE_BINARY_DIR} + COMMENT "Running LCOV" + ) + add_custom_target(coverage + DEPENDS ${CMAKE_BINARY_DIR}/lcov/index.html + COMMENT "LCOV report at lcov/index.html" + ) + message(STATUS "Coverage command added") + else() + if (HAVE_CXX_FLAG_COVERAGE) + set(CXX_FLAG_COVERAGE_MESSAGE supported) + else() + set(CXX_FLAG_COVERAGE_MESSAGE unavailable) + endif() + message(WARNING + "Coverage not available:\n" + " gcov: ${GCOV}\n" + " lcov: ${LCOV}\n" + " genhtml: ${GENHTML}\n" + " ctest: ${CTEST}\n" + " --coverage flag: ${CXX_FLAG_COVERAGE_MESSAGE}") + endif() +endif() diff --git a/test/basic_test.cc b/test/basic_test.cc new file mode 100644 index 0000000..bc1f96d --- /dev/null +++ b/test/basic_test.cc @@ -0,0 +1,99 @@ + +#include "benchmark/benchmark.h" + +#define BASIC_BENCHMARK_TEST(x) BENCHMARK(x)->Arg(8)->Arg(512)->Arg(8192) + +void BM_empty(benchmark::State& state) { + while (state.KeepRunning()) { + benchmark::DoNotOptimize(state.iterations()); + } +} +BENCHMARK(BM_empty); +BENCHMARK(BM_empty)->ThreadPerCpu(); + +void BM_spin_empty(benchmark::State& state) { + while (state.KeepRunning()) { + for (int x = 0; x < state.range(0); ++x) { + benchmark::DoNotOptimize(x); + } + } +} +BASIC_BENCHMARK_TEST(BM_spin_empty); +BASIC_BENCHMARK_TEST(BM_spin_empty)->ThreadPerCpu(); + +void BM_spin_pause_before(benchmark::State& state) { + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } + while (state.KeepRunning()) { + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } + } +} +BASIC_BENCHMARK_TEST(BM_spin_pause_before); +BASIC_BENCHMARK_TEST(BM_spin_pause_before)->ThreadPerCpu(); + +void BM_spin_pause_during(benchmark::State& state) { + while (state.KeepRunning()) { + state.PauseTiming(); + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } + state.ResumeTiming(); + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } + } +} +BASIC_BENCHMARK_TEST(BM_spin_pause_during); +BASIC_BENCHMARK_TEST(BM_spin_pause_during)->ThreadPerCpu(); + +void BM_pause_during(benchmark::State& state) { + while (state.KeepRunning()) { + state.PauseTiming(); + state.ResumeTiming(); + } +} +BENCHMARK(BM_pause_during); +BENCHMARK(BM_pause_during)->ThreadPerCpu(); +BENCHMARK(BM_pause_during)->UseRealTime(); +BENCHMARK(BM_pause_during)->UseRealTime()->ThreadPerCpu(); + +void BM_spin_pause_after(benchmark::State& state) { + while (state.KeepRunning()) { + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } + } + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } +} +BASIC_BENCHMARK_TEST(BM_spin_pause_after); +BASIC_BENCHMARK_TEST(BM_spin_pause_after)->ThreadPerCpu(); + +void BM_spin_pause_before_and_after(benchmark::State& state) { + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } + while (state.KeepRunning()) { + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } + } + for (int i = 0; i < state.range(0); ++i) { + benchmark::DoNotOptimize(i); + } +} +BASIC_BENCHMARK_TEST(BM_spin_pause_before_and_after); +BASIC_BENCHMARK_TEST(BM_spin_pause_before_and_after)->ThreadPerCpu(); + +void BM_empty_stop_start(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_empty_stop_start); +BENCHMARK(BM_empty_stop_start)->ThreadPerCpu(); + +BENCHMARK_MAIN() diff --git a/test/benchmark_test.cc b/test/benchmark_test.cc new file mode 100644 index 0000000..7a16466 --- /dev/null +++ b/test/benchmark_test.cc @@ -0,0 +1,240 @@ +#include "benchmark/benchmark.h" + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(__GNUC__) +#define BENCHMARK_NOINLINE __attribute__((noinline)) +#else +#define BENCHMARK_NOINLINE +#endif + +namespace { + +int BENCHMARK_NOINLINE Factorial(uint32_t n) { + return (n == 1) ? 1 : n * Factorial(n - 1); +} + +double CalculatePi(int depth) { + double pi = 0.0; + for (int i = 0; i < depth; ++i) { + double numerator = static_cast(((i % 2) * 2) - 1); + double denominator = static_cast((2 * i) - 1); + pi += numerator / denominator; + } + return (pi - 1.0) * 4; +} + +std::set ConstructRandomSet(int size) { + std::set s; + for (int i = 0; i < size; ++i) s.insert(i); + return s; +} + +std::mutex test_vector_mu; +std::vector* test_vector = nullptr; + +} // end namespace + +static void BM_Factorial(benchmark::State& state) { + int fac_42 = 0; + while (state.KeepRunning()) fac_42 = Factorial(8); + // Prevent compiler optimizations + std::stringstream ss; + ss << fac_42; + state.SetLabel(ss.str()); +} +BENCHMARK(BM_Factorial); +BENCHMARK(BM_Factorial)->UseRealTime(); + +static void BM_CalculatePiRange(benchmark::State& state) { + double pi = 0.0; + while (state.KeepRunning()) pi = CalculatePi(state.range(0)); + std::stringstream ss; + ss << pi; + state.SetLabel(ss.str()); +} +BENCHMARK_RANGE(BM_CalculatePiRange, 1, 1024 * 1024); + +static void BM_CalculatePi(benchmark::State& state) { + static const int depth = 1024; + while (state.KeepRunning()) { + benchmark::DoNotOptimize(CalculatePi(depth)); + } +} +BENCHMARK(BM_CalculatePi)->Threads(8); +BENCHMARK(BM_CalculatePi)->ThreadRange(1, 32); +BENCHMARK(BM_CalculatePi)->ThreadPerCpu(); + +static void BM_SetInsert(benchmark::State& state) { + while (state.KeepRunning()) { + state.PauseTiming(); + std::set data = ConstructRandomSet(state.range(0)); + state.ResumeTiming(); + for (int j = 0; j < state.range(1); ++j) data.insert(rand()); + } + state.SetItemsProcessed(state.iterations() * state.range(1)); + state.SetBytesProcessed(state.iterations() * state.range(1) * sizeof(int)); +} +BENCHMARK(BM_SetInsert)->Ranges({{1 << 10, 8 << 10}, {1, 10}}); + +template +static void BM_Sequential(benchmark::State& state) { + ValueType v = 42; + while (state.KeepRunning()) { + Container c; + for (int i = state.range(0); --i;) c.push_back(v); + } + const size_t items_processed = state.iterations() * state.range(0); + state.SetItemsProcessed(items_processed); + state.SetBytesProcessed(items_processed * sizeof(v)); +} +BENCHMARK_TEMPLATE2(BM_Sequential, std::vector, int) + ->Range(1 << 0, 1 << 10); +BENCHMARK_TEMPLATE(BM_Sequential, std::list)->Range(1 << 0, 1 << 10); +// Test the variadic version of BENCHMARK_TEMPLATE in C++11 and beyond. +#if __cplusplus >= 201103L +BENCHMARK_TEMPLATE(BM_Sequential, std::vector, int)->Arg(512); +#endif + +static void BM_StringCompare(benchmark::State& state) { + std::string s1(state.range(0), '-'); + std::string s2(state.range(0), '-'); + while (state.KeepRunning()) benchmark::DoNotOptimize(s1.compare(s2)); +} +BENCHMARK(BM_StringCompare)->Range(1, 1 << 20); + +static void BM_SetupTeardown(benchmark::State& state) { + if (state.thread_index == 0) { + // No need to lock test_vector_mu here as this is running single-threaded. + test_vector = new std::vector(); + } + int i = 0; + while (state.KeepRunning()) { + std::lock_guard l(test_vector_mu); + if (i % 2 == 0) + test_vector->push_back(i); + else + test_vector->pop_back(); + ++i; + } + if (state.thread_index == 0) { + delete test_vector; + } +} +BENCHMARK(BM_SetupTeardown)->ThreadPerCpu(); + +static void BM_LongTest(benchmark::State& state) { + double tracker = 0.0; + while (state.KeepRunning()) { + for (int i = 0; i < state.range(0); ++i) + benchmark::DoNotOptimize(tracker += i); + } +} +BENCHMARK(BM_LongTest)->Range(1 << 16, 1 << 28); + +static void BM_ParallelMemset(benchmark::State& state) { + int size = state.range(0) / static_cast(sizeof(int)); + int thread_size = size / state.threads; + int from = thread_size * state.thread_index; + int to = from + thread_size; + + if (state.thread_index == 0) { + test_vector = new std::vector(size); + } + + while (state.KeepRunning()) { + for (int i = from; i < to; i++) { + // No need to lock test_vector_mu as ranges + // do not overlap between threads. + benchmark::DoNotOptimize(test_vector->at(i) = 1); + } + } + + if (state.thread_index == 0) { + delete test_vector; + } +} +BENCHMARK(BM_ParallelMemset)->Arg(10 << 20)->ThreadRange(1, 4); + +static void BM_ManualTiming(benchmark::State& state) { + size_t slept_for = 0; + int microseconds = state.range(0); + std::chrono::duration sleep_duration{ + static_cast(microseconds)}; + + while (state.KeepRunning()) { + auto start = std::chrono::high_resolution_clock::now(); + // Simulate some useful workload with a sleep + std::this_thread::sleep_for( + std::chrono::duration_cast(sleep_duration)); + auto end = std::chrono::high_resolution_clock::now(); + + auto elapsed = + std::chrono::duration_cast>(end - start); + + state.SetIterationTime(elapsed.count()); + slept_for += microseconds; + } + state.SetItemsProcessed(slept_for); +} +BENCHMARK(BM_ManualTiming)->Range(1, 1 << 14)->UseRealTime(); +BENCHMARK(BM_ManualTiming)->Range(1, 1 << 14)->UseManualTime(); + +#if __cplusplus >= 201103L + +template +void BM_with_args(benchmark::State& state, Args&&...) { + while (state.KeepRunning()) { + } +} +BENCHMARK_CAPTURE(BM_with_args, int_test, 42, 43, 44); +BENCHMARK_CAPTURE(BM_with_args, string_and_pair_test, std::string("abc"), + std::pair(42, 3.8)); + +void BM_non_template_args(benchmark::State& state, int, double) { + while(state.KeepRunning()) {} +} +BENCHMARK_CAPTURE(BM_non_template_args, basic_test, 0, 0); + +#endif // __cplusplus >= 201103L + +static void BM_DenseThreadRanges(benchmark::State& st) { + switch (st.range(0)) { + case 1: + assert(st.threads == 1 || st.threads == 2 || st.threads == 3); + break; + case 2: + assert(st.threads == 1 || st.threads == 3 || st.threads == 4); + break; + case 3: + assert(st.threads == 5 || st.threads == 8 || st.threads == 11 || + st.threads == 14); + break; + default: + assert(false && "Invalid test case number"); + } + while (st.KeepRunning()) { + } +} +BENCHMARK(BM_DenseThreadRanges)->Arg(1)->DenseThreadRange(1, 3); +BENCHMARK(BM_DenseThreadRanges)->Arg(2)->DenseThreadRange(1, 4, 2); +BENCHMARK(BM_DenseThreadRanges)->Arg(3)->DenseThreadRange(5, 14, 3); + +BENCHMARK_MAIN() diff --git a/test/complexity_test.cc b/test/complexity_test.cc new file mode 100644 index 0000000..62d1154 --- /dev/null +++ b/test/complexity_test.cc @@ -0,0 +1,167 @@ +#undef NDEBUG +#include +#include +#include +#include +#include +#include "benchmark/benchmark.h" +#include "output_test.h" + +namespace { + +#define ADD_COMPLEXITY_CASES(...) \ + int CONCAT(dummy, __LINE__) = AddComplexityTest(__VA_ARGS__) + +int AddComplexityTest(std::string big_o_test_name, std::string rms_test_name, + std::string big_o) { + SetSubstitutions({{"%bigo_name", big_o_test_name}, + {"%rms_name", rms_test_name}, + {"%bigo_str", "[ ]* %float " + big_o}, + {"%bigo", big_o}, + {"%rms", "[ ]*[0-9]+ %"}}); + AddCases( + TC_ConsoleOut, + {{"^%bigo_name %bigo_str %bigo_str[ ]*$"}, + {"^%bigo_name", MR_Not}, // Assert we we didn't only matched a name. + {"^%rms_name %rms %rms[ ]*$", MR_Next}}); + AddCases(TC_JSONOut, {{"\"name\": \"%bigo_name\",$"}, + {"\"cpu_coefficient\": [0-9]+,$", MR_Next}, + {"\"real_coefficient\": [0-9]{1,5},$", MR_Next}, + {"\"big_o\": \"%bigo\",$", MR_Next}, + {"\"time_unit\": \"ns\"$", MR_Next}, + {"}", MR_Next}, + {"\"name\": \"%rms_name\",$"}, + {"\"rms\": %float$", MR_Next}, + {"}", MR_Next}}); + AddCases(TC_CSVOut, {{"^\"%bigo_name\",,%float,%float,%bigo,,,,,$"}, + {"^\"%bigo_name\"", MR_Not}, + {"^\"%rms_name\",,%float,%float,,,,,,$", MR_Next}}); + return 0; +} + +} // end namespace + +// ========================================================================= // +// --------------------------- Testing BigO O(1) --------------------------- // +// ========================================================================= // + +void BM_Complexity_O1(benchmark::State& state) { + while (state.KeepRunning()) { + for (int i = 0; i < 1024; ++i) { + benchmark::DoNotOptimize(&i); + } + } + state.SetComplexityN(state.range(0)); +} +BENCHMARK(BM_Complexity_O1)->Range(1, 1 << 18)->Complexity(benchmark::o1); +BENCHMARK(BM_Complexity_O1)->Range(1, 1 << 18)->Complexity(); +BENCHMARK(BM_Complexity_O1)->Range(1, 1 << 18)->Complexity([](int) { + return 1.0; +}); + +const char *big_o_1_test_name = "BM_Complexity_O1_BigO"; +const char *rms_o_1_test_name = "BM_Complexity_O1_RMS"; +const char *enum_big_o_1 = "\\([0-9]+\\)"; +// FIXME: Tolerate both '(1)' and 'lgN' as output when the complexity is auto +// deduced. +// See https://github.com/google/benchmark/issues/272 +const char *auto_big_o_1 = "(\\([0-9]+\\))|(lgN)"; +const char *lambda_big_o_1 = "f\\(N\\)"; + +// Add enum tests +ADD_COMPLEXITY_CASES(big_o_1_test_name, rms_o_1_test_name, enum_big_o_1); + +// Add auto enum tests +ADD_COMPLEXITY_CASES(big_o_1_test_name, rms_o_1_test_name, auto_big_o_1); + +// Add lambda tests +ADD_COMPLEXITY_CASES(big_o_1_test_name, rms_o_1_test_name, lambda_big_o_1); + +// ========================================================================= // +// --------------------------- Testing BigO O(N) --------------------------- // +// ========================================================================= // + +std::vector ConstructRandomVector(int size) { + std::vector v; + v.reserve(size); + for (int i = 0; i < size; ++i) { + v.push_back(std::rand() % size); + } + return v; +} + +void BM_Complexity_O_N(benchmark::State& state) { + auto v = ConstructRandomVector(state.range(0)); + const int item_not_in_vector = + state.range(0) * 2; // Test worst case scenario (item not in vector) + while (state.KeepRunning()) { + benchmark::DoNotOptimize(std::find(v.begin(), v.end(), item_not_in_vector)); + } + state.SetComplexityN(state.range(0)); +} +BENCHMARK(BM_Complexity_O_N) + ->RangeMultiplier(2) + ->Range(1 << 10, 1 << 16) + ->Complexity(benchmark::oN); +BENCHMARK(BM_Complexity_O_N) + ->RangeMultiplier(2) + ->Range(1 << 10, 1 << 16) + ->Complexity([](int n) -> double { return n; }); +BENCHMARK(BM_Complexity_O_N) + ->RangeMultiplier(2) + ->Range(1 << 10, 1 << 16) + ->Complexity(); + +const char *big_o_n_test_name = "BM_Complexity_O_N_BigO"; +const char *rms_o_n_test_name = "BM_Complexity_O_N_RMS"; +const char *enum_auto_big_o_n = "N"; +const char *lambda_big_o_n = "f\\(N\\)"; + +// Add enum tests +ADD_COMPLEXITY_CASES(big_o_n_test_name, rms_o_n_test_name, enum_auto_big_o_n); + +// Add lambda tests +ADD_COMPLEXITY_CASES(big_o_n_test_name, rms_o_n_test_name, lambda_big_o_n); + +// ========================================================================= // +// ------------------------- Testing BigO O(N*lgN) ------------------------- // +// ========================================================================= // + +static void BM_Complexity_O_N_log_N(benchmark::State& state) { + auto v = ConstructRandomVector(state.range(0)); + while (state.KeepRunning()) { + std::sort(v.begin(), v.end()); + } + state.SetComplexityN(state.range(0)); +} +BENCHMARK(BM_Complexity_O_N_log_N) + ->RangeMultiplier(2) + ->Range(1 << 10, 1 << 16) + ->Complexity(benchmark::oNLogN); +BENCHMARK(BM_Complexity_O_N_log_N) + ->RangeMultiplier(2) + ->Range(1 << 10, 1 << 16) + ->Complexity([](int n) { return n * log2(n); }); +BENCHMARK(BM_Complexity_O_N_log_N) + ->RangeMultiplier(2) + ->Range(1 << 10, 1 << 16) + ->Complexity(); + +const char *big_o_n_lg_n_test_name = "BM_Complexity_O_N_log_N_BigO"; +const char *rms_o_n_lg_n_test_name = "BM_Complexity_O_N_log_N_RMS"; +const char *enum_auto_big_o_n_lg_n = "NlgN"; +const char *lambda_big_o_n_lg_n = "f\\(N\\)"; + +// Add enum tests +ADD_COMPLEXITY_CASES(big_o_n_lg_n_test_name, rms_o_n_lg_n_test_name, + enum_auto_big_o_n_lg_n); + +// Add lambda tests +ADD_COMPLEXITY_CASES(big_o_n_lg_n_test_name, rms_o_n_lg_n_test_name, + lambda_big_o_n_lg_n); + +// ========================================================================= // +// --------------------------- TEST CASES END ------------------------------ // +// ========================================================================= // + +int main(int argc, char *argv[]) { RunOutputTests(argc, argv); } diff --git a/test/cxx03_test.cc b/test/cxx03_test.cc new file mode 100644 index 0000000..a79d964 --- /dev/null +++ b/test/cxx03_test.cc @@ -0,0 +1,48 @@ +#undef NDEBUG +#include +#include + +#include "benchmark/benchmark.h" + +#if __cplusplus >= 201103L +#error C++11 or greater detected. Should be C++03. +#endif + +void BM_empty(benchmark::State& state) { + while (state.KeepRunning()) { + volatile std::size_t x = state.iterations(); + ((void)x); + } +} +BENCHMARK(BM_empty); + +// The new C++11 interface for args/ranges requires initializer list support. +// Therefore we provide the old interface to support C++03. +void BM_old_arg_range_interface(benchmark::State& state) { + assert((state.range(0) == 1 && state.range(1) == 2) || + (state.range(0) == 5 && state.range(1) == 6)); + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_old_arg_range_interface)->ArgPair(1, 2)->RangePair(5, 5, 6, 6); + +template +void BM_template2(benchmark::State& state) { + BM_empty(state); +} +BENCHMARK_TEMPLATE2(BM_template2, int, long); + +template +void BM_template1(benchmark::State& state) { + BM_empty(state); +} +BENCHMARK_TEMPLATE(BM_template1, long); +BENCHMARK_TEMPLATE1(BM_template1, int); + +void BM_counters(benchmark::State& state) { + BM_empty(state); + state.counters["Foo"] = 2; +} +BENCHMARK(BM_counters); + +BENCHMARK_MAIN() diff --git a/test/diagnostics_test.cc b/test/diagnostics_test.cc new file mode 100644 index 0000000..7aac806 --- /dev/null +++ b/test/diagnostics_test.cc @@ -0,0 +1,64 @@ +// Testing: +// State::PauseTiming() +// State::ResumeTiming() +// Test that CHECK's within these function diagnose when they are called +// outside of the KeepRunning() loop. +// +// NOTE: Users should NOT include or use src/check.h. This is only done in +// order to test library internals. + +#include +#include + +#include "../src/check.h" +#include "benchmark/benchmark.h" + +#if defined(__GNUC__) && !defined(__EXCEPTIONS) +#define TEST_HAS_NO_EXCEPTIONS +#endif + +void TestHandler() { +#ifndef TEST_HAS_NO_EXCEPTIONS + throw std::logic_error(""); +#else + std::abort(); +#endif +} + +void try_invalid_pause_resume(benchmark::State& state) { +#if !defined(TEST_BENCHMARK_LIBRARY_HAS_NO_ASSERTIONS) && !defined(TEST_HAS_NO_EXCEPTIONS) + try { + state.PauseTiming(); + std::abort(); + } catch (std::logic_error const&) { + } + try { + state.ResumeTiming(); + std::abort(); + } catch (std::logic_error const&) { + } +#else + (void)state; // avoid unused warning +#endif +} + +void BM_diagnostic_test(benchmark::State& state) { + static bool called_once = false; + + if (called_once == false) try_invalid_pause_resume(state); + + while (state.KeepRunning()) { + benchmark::DoNotOptimize(state.iterations()); + } + + if (called_once == false) try_invalid_pause_resume(state); + + called_once = true; +} +BENCHMARK(BM_diagnostic_test); + +int main(int argc, char* argv[]) { + benchmark::internal::GetAbortHandler() = &TestHandler; + benchmark::Initialize(&argc, argv); + benchmark::RunSpecifiedBenchmarks(); +} diff --git a/test/donotoptimize_test.cc b/test/donotoptimize_test.cc new file mode 100644 index 0000000..a705654 --- /dev/null +++ b/test/donotoptimize_test.cc @@ -0,0 +1,52 @@ +#include "benchmark/benchmark.h" + +#include + +namespace { +#if defined(__GNUC__) +std::uint64_t double_up(const std::uint64_t x) __attribute__((const)); +#endif +std::uint64_t double_up(const std::uint64_t x) { return x * 2; } +} + +// Using DoNotOptimize on types like BitRef seem to cause a lot of problems +// with the inline assembly on both GCC and Clang. +struct BitRef { + int index; + unsigned char &byte; + +public: + static BitRef Make() { + static unsigned char arr[2] = {}; + BitRef b(1, arr[0]); + return b; + } +private: + BitRef(int i, unsigned char& b) : index(i), byte(b) {} +}; + +int main(int, char*[]) { + // this test verifies compilation of DoNotOptimize() for some types + + char buffer8[8]; + benchmark::DoNotOptimize(buffer8); + + char buffer20[20]; + benchmark::DoNotOptimize(buffer20); + + char buffer1024[1024]; + benchmark::DoNotOptimize(buffer1024); + benchmark::DoNotOptimize(&buffer1024[0]); + + int x = 123; + benchmark::DoNotOptimize(x); + benchmark::DoNotOptimize(&x); + benchmark::DoNotOptimize(x += 42); + + benchmark::DoNotOptimize(double_up(x)); + + // These tests are to e + benchmark::DoNotOptimize(BitRef::Make()); + BitRef lval = BitRef::Make(); + benchmark::DoNotOptimize(lval); +} diff --git a/test/filter_test.cc b/test/filter_test.cc new file mode 100644 index 0000000..3a20529 --- /dev/null +++ b/test/filter_test.cc @@ -0,0 +1,104 @@ +#include "benchmark/benchmark.h" + +#include +#include +#include +#include + +#include +#include +#include +#include + +namespace { + +class TestReporter : public benchmark::ConsoleReporter { + public: + virtual bool ReportContext(const Context& context) { + return ConsoleReporter::ReportContext(context); + }; + + virtual void ReportRuns(const std::vector& report) { + ++count_; + ConsoleReporter::ReportRuns(report); + }; + + TestReporter() : count_(0) {} + + virtual ~TestReporter() {} + + size_t GetCount() const { return count_; } + + private: + mutable size_t count_; +}; + +} // end namespace + +static void NoPrefix(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(NoPrefix); + +static void BM_Foo(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_Foo); + +static void BM_Bar(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_Bar); + +static void BM_FooBar(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_FooBar); + +static void BM_FooBa(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_FooBa); + +int main(int argc, char **argv) { + bool list_only = false; + for (int i = 0; i < argc; ++i) + list_only |= std::string(argv[i]).find("--benchmark_list_tests") != + std::string::npos; + + benchmark::Initialize(&argc, argv); + + TestReporter test_reporter; + const size_t returned_count = + benchmark::RunSpecifiedBenchmarks(&test_reporter); + + if (argc == 2) { + // Make sure we ran all of the tests + std::stringstream ss(argv[1]); + size_t expected_return; + ss >> expected_return; + + if (returned_count != expected_return) { + std::cerr << "ERROR: Expected " << expected_return + << " tests to match the filter but returned_count = " + << returned_count << std::endl; + return -1; + } + + const size_t expected_reports = list_only ? 0 : expected_return; + const size_t reports_count = test_reporter.GetCount(); + if (reports_count != expected_reports) { + std::cerr << "ERROR: Expected " << expected_reports + << " tests to be run but reported_count = " << reports_count + << std::endl; + return -1; + } + } + + return 0; +} diff --git a/test/fixture_test.cc b/test/fixture_test.cc new file mode 100644 index 0000000..bbc2f95 --- /dev/null +++ b/test/fixture_test.cc @@ -0,0 +1,49 @@ + +#include "benchmark/benchmark.h" + +#include +#include + +class MyFixture : public ::benchmark::Fixture { + public: + void SetUp(const ::benchmark::State& state) { + if (state.thread_index == 0) { + assert(data.get() == nullptr); + data.reset(new int(42)); + } + } + + void TearDown(const ::benchmark::State& state) { + if (state.thread_index == 0) { + assert(data.get() != nullptr); + data.reset(); + } + } + + ~MyFixture() { assert(data == nullptr); } + + std::unique_ptr data; +}; + +BENCHMARK_F(MyFixture, Foo)(benchmark::State &st) { + assert(data.get() != nullptr); + assert(*data == 42); + while (st.KeepRunning()) { + } +} + +BENCHMARK_DEFINE_F(MyFixture, Bar)(benchmark::State& st) { + if (st.thread_index == 0) { + assert(data.get() != nullptr); + assert(*data == 42); + } + while (st.KeepRunning()) { + assert(data.get() != nullptr); + assert(*data == 42); + } + st.SetItemsProcessed(st.range(0)); +} +BENCHMARK_REGISTER_F(MyFixture, Bar)->Arg(42); +BENCHMARK_REGISTER_F(MyFixture, Bar)->Arg(42)->ThreadPerCpu(); + +BENCHMARK_MAIN() diff --git a/test/map_test.cc b/test/map_test.cc new file mode 100644 index 0000000..83457c9 --- /dev/null +++ b/test/map_test.cc @@ -0,0 +1,56 @@ +#include "benchmark/benchmark.h" + +#include +#include + +namespace { + +std::map ConstructRandomMap(int size) { + std::map m; + for (int i = 0; i < size; ++i) { + m.insert(std::make_pair(rand() % size, rand() % size)); + } + return m; +} + +} // namespace + +// Basic version. +static void BM_MapLookup(benchmark::State& state) { + const int size = state.range(0); + while (state.KeepRunning()) { + state.PauseTiming(); + std::map m = ConstructRandomMap(size); + state.ResumeTiming(); + for (int i = 0; i < size; ++i) { + benchmark::DoNotOptimize(m.find(rand() % size)); + } + } + state.SetItemsProcessed(state.iterations() * size); +} +BENCHMARK(BM_MapLookup)->Range(1 << 3, 1 << 12); + +// Using fixtures. +class MapFixture : public ::benchmark::Fixture { + public: + void SetUp(const ::benchmark::State& st) { + m = ConstructRandomMap(st.range(0)); + } + + void TearDown(const ::benchmark::State&) { m.clear(); } + + std::map m; +}; + +BENCHMARK_DEFINE_F(MapFixture, Lookup)(benchmark::State& state) { + const int size = state.range(0); + while (state.KeepRunning()) { + for (int i = 0; i < size; ++i) { + benchmark::DoNotOptimize(m.find(rand() % size)); + } + } + state.SetItemsProcessed(state.iterations() * size); +} +BENCHMARK_REGISTER_F(MapFixture, Lookup)->Range(1 << 3, 1 << 12); + +BENCHMARK_MAIN() diff --git a/test/multiple_ranges_test.cc b/test/multiple_ranges_test.cc new file mode 100644 index 0000000..8e67b3b --- /dev/null +++ b/test/multiple_ranges_test.cc @@ -0,0 +1,74 @@ +#include "benchmark/benchmark.h" + +#include +#include + +class MultipleRangesFixture : public ::benchmark::Fixture { + public: + MultipleRangesFixture() + : expectedValues({{1, 3, 5}, + {1, 3, 8}, + {1, 3, 15}, + {2, 3, 5}, + {2, 3, 8}, + {2, 3, 15}, + {1, 4, 5}, + {1, 4, 8}, + {1, 4, 15}, + {2, 4, 5}, + {2, 4, 8}, + {2, 4, 15}, + {1, 7, 5}, + {1, 7, 8}, + {1, 7, 15}, + {2, 7, 5}, + {2, 7, 8}, + {2, 7, 15}, + {7, 6, 3}}) {} + + void SetUp(const ::benchmark::State& state) { + std::vector ranges = {state.range(0), state.range(1), state.range(2)}; + + assert(expectedValues.find(ranges) != expectedValues.end()); + + actualValues.insert(ranges); + } + + virtual ~MultipleRangesFixture() { + assert(actualValues.size() == expectedValues.size()); + } + + std::set> expectedValues; + std::set> actualValues; +}; + +BENCHMARK_DEFINE_F(MultipleRangesFixture, Empty)(benchmark::State& state) { + while (state.KeepRunning()) { + int product = state.range(0) * state.range(1) * state.range(2); + for (int x = 0; x < product; x++) { + benchmark::DoNotOptimize(x); + } + } +} + +BENCHMARK_REGISTER_F(MultipleRangesFixture, Empty) + ->RangeMultiplier(2) + ->Ranges({{1, 2}, {3, 7}, {5, 15}}) + ->Args({7, 6, 3}); + +void BM_CheckDefaultArgument(benchmark::State& state) { + // Test that the 'range()' without an argument is the same as 'range(0)'. + assert(state.range() == state.range(0)); + assert(state.range() != state.range(1)); + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_CheckDefaultArgument)->Ranges({{1, 5}, {6, 10}}); + +static void BM_MultipleRanges(benchmark::State& st) { + while (st.KeepRunning()) { + } +} +BENCHMARK(BM_MultipleRanges)->Ranges({{5, 5}, {6, 6}}); + +BENCHMARK_MAIN() diff --git a/test/options_test.cc b/test/options_test.cc new file mode 100644 index 0000000..8eac068 --- /dev/null +++ b/test/options_test.cc @@ -0,0 +1,65 @@ +#include "benchmark/benchmark.h" +#include +#include + +#if defined(NDEBUG) +#undef NDEBUG +#endif +#include + +void BM_basic(benchmark::State& state) { + while (state.KeepRunning()) { + } +} + +void BM_basic_slow(benchmark::State& state) { + std::chrono::milliseconds sleep_duration(state.range(0)); + while (state.KeepRunning()) { + std::this_thread::sleep_for( + std::chrono::duration_cast(sleep_duration)); + } +} + +BENCHMARK(BM_basic); +BENCHMARK(BM_basic)->Arg(42); +BENCHMARK(BM_basic_slow)->Arg(10)->Unit(benchmark::kNanosecond); +BENCHMARK(BM_basic_slow)->Arg(100)->Unit(benchmark::kMicrosecond); +BENCHMARK(BM_basic_slow)->Arg(1000)->Unit(benchmark::kMillisecond); +BENCHMARK(BM_basic)->Range(1, 8); +BENCHMARK(BM_basic)->RangeMultiplier(2)->Range(1, 8); +BENCHMARK(BM_basic)->DenseRange(10, 15); +BENCHMARK(BM_basic)->Args({42, 42}); +BENCHMARK(BM_basic)->Ranges({{64, 512}, {64, 512}}); +BENCHMARK(BM_basic)->MinTime(0.7); +BENCHMARK(BM_basic)->UseRealTime(); +BENCHMARK(BM_basic)->ThreadRange(2, 4); +BENCHMARK(BM_basic)->ThreadPerCpu(); +BENCHMARK(BM_basic)->Repetitions(3); + +void CustomArgs(benchmark::internal::Benchmark* b) { + for (int i = 0; i < 10; ++i) { + b->Arg(i); + } +} + +BENCHMARK(BM_basic)->Apply(CustomArgs); + +void BM_explicit_iteration_count(benchmark::State& st) { + // Test that benchmarks specified with an explicit iteration count are + // only run once. + static bool invoked_before = false; + assert(!invoked_before); + invoked_before = true; + + // Test that the requested iteration count is respected. + assert(st.max_iterations == 42); + size_t actual_iterations = 0; + while (st.KeepRunning()) + ++actual_iterations; + assert(st.iterations() == st.max_iterations); + assert(st.iterations() == 42); + +} +BENCHMARK(BM_explicit_iteration_count)->Iterations(42); + +BENCHMARK_MAIN() diff --git a/test/output_test.h b/test/output_test.h new file mode 100644 index 0000000..897a138 --- /dev/null +++ b/test/output_test.h @@ -0,0 +1,201 @@ +#ifndef TEST_OUTPUT_TEST_H +#define TEST_OUTPUT_TEST_H + +#undef NDEBUG +#include +#include +#include +#include +#include +#include +#include + +#include "../src/re.h" +#include "benchmark/benchmark.h" + +#define CONCAT2(x, y) x##y +#define CONCAT(x, y) CONCAT2(x, y) + +#define ADD_CASES(...) int CONCAT(dummy, __LINE__) = ::AddCases(__VA_ARGS__) + +#define SET_SUBSTITUTIONS(...) \ + int CONCAT(dummy, __LINE__) = ::SetSubstitutions(__VA_ARGS__) + +enum MatchRules { + MR_Default, // Skip non-matching lines until a match is found. + MR_Next, // Match must occur on the next line. + MR_Not // No line between the current position and the next match matches + // the regex +}; + +struct TestCase { + TestCase(std::string re, int rule = MR_Default); + + std::string regex_str; + int match_rule; + std::string substituted_regex; + std::shared_ptr regex; +}; + +enum TestCaseID { + TC_ConsoleOut, + TC_ConsoleErr, + TC_JSONOut, + TC_JSONErr, + TC_CSVOut, + TC_CSVErr, + + TC_NumID // PRIVATE +}; + +// Add a list of test cases to be run against the output specified by +// 'ID' +int AddCases(TestCaseID ID, std::initializer_list il); + +// Add or set a list of substitutions to be performed on constructed regex's +// See 'output_test_helper.cc' for a list of default substitutions. +int SetSubstitutions( + std::initializer_list> il); + +// Run all output tests. +void RunOutputTests(int argc, char* argv[]); + +// ========================================================================= // +// ------------------------- Results checking ------------------------------ // +// ========================================================================= // + +// Call this macro to register a benchmark for checking its results. This +// should be all that's needed. It subscribes a function to check the (CSV) +// results of a benchmark. This is done only after verifying that the output +// strings are really as expected. +// bm_name_pattern: a name or a regex pattern which will be matched against +// all the benchmark names. Matching benchmarks +// will be the subject of a call to checker_function +// checker_function: should be of type ResultsCheckFn (see below) +#define CHECK_BENCHMARK_RESULTS(bm_name_pattern, checker_function) \ + size_t CONCAT(dummy, __LINE__) = AddChecker(bm_name_pattern, checker_function) + +struct Results; +typedef std::function< void(Results const&) > ResultsCheckFn; + +size_t AddChecker(const char* bm_name_pattern, ResultsCheckFn fn); + +// Class holding the results of a benchmark. +// It is passed in calls to checker functions. +struct Results { + + // the benchmark name + std::string name; + // the benchmark fields + std::map< std::string, std::string > values; + + Results(const std::string& n) : name(n) {} + + int NumThreads() const; + + typedef enum { kCpuTime, kRealTime } BenchmarkTime; + + // get cpu_time or real_time in seconds + double GetTime(BenchmarkTime which) const; + + // get the real_time duration of the benchmark in seconds. + // it is better to use fuzzy float checks for this, as the float + // ASCII formatting is lossy. + double DurationRealTime() const { + return GetAs< double >("iterations") * GetTime(kRealTime); + } + // get the cpu_time duration of the benchmark in seconds + double DurationCPUTime() const { + return GetAs< double >("iterations") * GetTime(kCpuTime); + } + + // get the string for a result by name, or nullptr if the name + // is not found + const std::string* Get(const char* entry_name) const { + auto it = values.find(entry_name); + if(it == values.end()) return nullptr; + return &it->second; + } + + // get a result by name, parsed as a specific type. + // NOTE: for counters, use GetCounterAs instead. + template + T GetAs(const char* entry_name) const; + + // counters are written as doubles, so they have to be read first + // as a double, and only then converted to the asked type. + template + T GetCounterAs(const char* entry_name) const { + double dval = GetAs< double >(entry_name); + T tval = static_cast< T >(dval); + return tval; + } +}; + +template +T Results::GetAs(const char* entry_name) const { + auto *sv = Get(entry_name); + CHECK(sv != nullptr && !sv->empty()); + std::stringstream ss; + ss << *sv; + T out; + ss >> out; + CHECK(!ss.fail()); + return out; +} + +//---------------------------------- +// Macros to help in result checking. Do not use them with arguments causing +// side-effects. + +#define _CHECK_RESULT_VALUE(entry, getfn, var_type, var_name, relationship, value) \ + CONCAT(CHECK_, relationship) \ + (entry.getfn< var_type >(var_name), (value)) << "\n" \ + << __FILE__ << ":" << __LINE__ << ": " << (entry).name << ":\n" \ + << __FILE__ << ":" << __LINE__ << ": " \ + << "expected (" << #var_type << ")" << (var_name) \ + << "=" << (entry).getfn< var_type >(var_name) \ + << " to be " #relationship " to " << (value) << "\n" + +// check with tolerance. eps_factor is the tolerance window, which is +// interpreted relative to value (eg, 0.1 means 10% of value). +#define _CHECK_FLOAT_RESULT_VALUE(entry, getfn, var_type, var_name, relationship, value, eps_factor) \ + CONCAT(CHECK_FLOAT_, relationship) \ + (entry.getfn< var_type >(var_name), (value), (eps_factor) * (value)) << "\n" \ + << __FILE__ << ":" << __LINE__ << ": " << (entry).name << ":\n" \ + << __FILE__ << ":" << __LINE__ << ": " \ + << "expected (" << #var_type << ")" << (var_name) \ + << "=" << (entry).getfn< var_type >(var_name) \ + << " to be " #relationship " to " << (value) << "\n" \ + << __FILE__ << ":" << __LINE__ << ": " \ + << "with tolerance of " << (eps_factor) * (value) \ + << " (" << (eps_factor)*100. << "%), " \ + << "but delta was " << ((entry).getfn< var_type >(var_name) - (value)) \ + << " (" << (((entry).getfn< var_type >(var_name) - (value)) \ + / \ + ((value) > 1.e-5 || value < -1.e-5 ? value : 1.e-5)*100.) \ + << "%)" + +#define CHECK_RESULT_VALUE(entry, var_type, var_name, relationship, value) \ + _CHECK_RESULT_VALUE(entry, GetAs, var_type, var_name, relationship, value) + +#define CHECK_COUNTER_VALUE(entry, var_type, var_name, relationship, value) \ + _CHECK_RESULT_VALUE(entry, GetCounterAs, var_type, var_name, relationship, value) + +#define CHECK_FLOAT_RESULT_VALUE(entry, var_name, relationship, value, eps_factor) \ + _CHECK_FLOAT_RESULT_VALUE(entry, GetAs, double, var_name, relationship, value, eps_factor) + +#define CHECK_FLOAT_COUNTER_VALUE(entry, var_name, relationship, value, eps_factor) \ + _CHECK_FLOAT_RESULT_VALUE(entry, GetCounterAs, double, var_name, relationship, value, eps_factor) + +// ========================================================================= // +// --------------------------- Misc Utilities ------------------------------ // +// ========================================================================= // + +namespace { + +const char* const dec_re = "[0-9]*[.]?[0-9]+([eE][-+][0-9]+)?"; + +} // end namespace + +#endif // TEST_OUTPUT_TEST_H diff --git a/test/output_test_helper.cc b/test/output_test_helper.cc new file mode 100644 index 0000000..24746f6 --- /dev/null +++ b/test/output_test_helper.cc @@ -0,0 +1,423 @@ +#include +#include +#include +#include +#include + +#include "../src/check.h" // NOTE: check.h is for internal use only! +#include "../src/re.h" // NOTE: re.h is for internal use only +#include "output_test.h" +#include "../src/benchmark_api_internal.h" + +// ========================================================================= // +// ------------------------------ Internals -------------------------------- // +// ========================================================================= // +namespace internal { +namespace { + +using TestCaseList = std::vector; + +// Use a vector because the order elements are added matters during iteration. +// std::map/unordered_map don't guarantee that. +// For example: +// SetSubstitutions({{"%HelloWorld", "Hello"}, {"%Hello", "Hi"}}); +// Substitute("%HelloWorld") // Always expands to Hello. +using SubMap = std::vector>; + +TestCaseList& GetTestCaseList(TestCaseID ID) { + // Uses function-local statics to ensure initialization occurs + // before first use. + static TestCaseList lists[TC_NumID]; + return lists[ID]; +} + +SubMap& GetSubstitutions() { + // Don't use 'dec_re' from header because it may not yet be initialized. + static std::string safe_dec_re = "[0-9]*[.]?[0-9]+([eE][-+][0-9]+)?"; + static SubMap map = { + {"%float", "[0-9]*[.]?[0-9]+([eE][-+][0-9]+)?"}, + // human-readable float + {"%hrfloat", "[0-9]*[.]?[0-9]+([eE][-+][0-9]+)?[kMGTPEZYmunpfazy]?"}, + {"%int", "[ ]*[0-9]+"}, + {" %s ", "[ ]+"}, + {"%time", "[ ]*[0-9]{1,5} ns"}, + {"%console_report", "[ ]*[0-9]{1,5} ns [ ]*[0-9]{1,5} ns [ ]*[0-9]+"}, + {"%console_us_report", "[ ]*[0-9] us [ ]*[0-9] us [ ]*[0-9]+"}, + {"%csv_header", + "name,iterations,real_time,cpu_time,time_unit,bytes_per_second," + "items_per_second,label,error_occurred,error_message"}, + {"%csv_report", "[0-9]+," + safe_dec_re + "," + safe_dec_re + ",ns,,,,,"}, + {"%csv_us_report", "[0-9]+," + safe_dec_re + "," + safe_dec_re + ",us,,,,,"}, + {"%csv_bytes_report", + "[0-9]+," + safe_dec_re + "," + safe_dec_re + ",ns," + safe_dec_re + ",,,,"}, + {"%csv_items_report", + "[0-9]+," + safe_dec_re + "," + safe_dec_re + ",ns,," + safe_dec_re + ",,,"}, + {"%csv_bytes_items_report", + "[0-9]+," + safe_dec_re + "," + safe_dec_re + ",ns," + safe_dec_re + + "," + safe_dec_re + ",,,"}, + {"%csv_label_report_begin", "[0-9]+," + safe_dec_re + "," + safe_dec_re + ",ns,,,"}, + {"%csv_label_report_end", ",,"}}; + return map; +} + +std::string PerformSubstitutions(std::string source) { + SubMap const& subs = GetSubstitutions(); + using SizeT = std::string::size_type; + for (auto const& KV : subs) { + SizeT pos; + SizeT next_start = 0; + while ((pos = source.find(KV.first, next_start)) != std::string::npos) { + next_start = pos + KV.second.size(); + source.replace(pos, KV.first.size(), KV.second); + } + } + return source; +} + +void CheckCase(std::stringstream& remaining_output, TestCase const& TC, + TestCaseList const& not_checks) { + std::string first_line; + bool on_first = true; + std::string line; + while (remaining_output.eof() == false) { + CHECK(remaining_output.good()); + std::getline(remaining_output, line); + if (on_first) { + first_line = line; + on_first = false; + } + for (const auto& NC : not_checks) { + CHECK(!NC.regex->Match(line)) + << "Unexpected match for line \"" << line << "\" for MR_Not regex \"" + << NC.regex_str << "\"" + << "\n actual regex string \"" << TC.substituted_regex << "\"" + << "\n started matching near: " << first_line; + } + if (TC.regex->Match(line)) return; + CHECK(TC.match_rule != MR_Next) + << "Expected line \"" << line << "\" to match regex \"" << TC.regex_str + << "\"" + << "\n actual regex string \"" << TC.substituted_regex << "\"" + << "\n started matching near: " << first_line; + } + CHECK(remaining_output.eof() == false) + << "End of output reached before match for regex \"" << TC.regex_str + << "\" was found" + << "\n actual regex string \"" << TC.substituted_regex << "\"" + << "\n started matching near: " << first_line; +} + +void CheckCases(TestCaseList const& checks, std::stringstream& output) { + std::vector not_checks; + for (size_t i = 0; i < checks.size(); ++i) { + const auto& TC = checks[i]; + if (TC.match_rule == MR_Not) { + not_checks.push_back(TC); + continue; + } + CheckCase(output, TC, not_checks); + not_checks.clear(); + } +} + +class TestReporter : public benchmark::BenchmarkReporter { + public: + TestReporter(std::vector reps) + : reporters_(reps) {} + + virtual bool ReportContext(const Context& context) { + bool last_ret = false; + bool first = true; + for (auto rep : reporters_) { + bool new_ret = rep->ReportContext(context); + CHECK(first || new_ret == last_ret) + << "Reports return different values for ReportContext"; + first = false; + last_ret = new_ret; + } + (void)first; + return last_ret; + } + + void ReportRuns(const std::vector& report) { + for (auto rep : reporters_) rep->ReportRuns(report); + } + void Finalize() { + for (auto rep : reporters_) rep->Finalize(); + } + + private: + std::vector reporters_; +}; +} + +} // end namespace internal + +// ========================================================================= // +// -------------------------- Results checking ----------------------------- // +// ========================================================================= // + +namespace internal { + +// Utility class to manage subscribers for checking benchmark results. +// It works by parsing the CSV output to read the results. +class ResultsChecker { + public: + + struct PatternAndFn : public TestCase { // reusing TestCase for its regexes + PatternAndFn(const std::string& rx, ResultsCheckFn fn_) + : TestCase(rx), fn(fn_) {} + ResultsCheckFn fn; + }; + + std::vector< PatternAndFn > check_patterns; + std::vector< Results > results; + std::vector< std::string > field_names; + + void Add(const std::string& entry_pattern, ResultsCheckFn fn); + + void CheckResults(std::stringstream& output); + + private: + + void SetHeader_(const std::string& csv_header); + void SetValues_(const std::string& entry_csv_line); + + std::vector< std::string > SplitCsv_(const std::string& line); + +}; + +// store the static ResultsChecker in a function to prevent initialization +// order problems +ResultsChecker& GetResultsChecker() { + static ResultsChecker rc; + return rc; +} + +// add a results checker for a benchmark +void ResultsChecker::Add(const std::string& entry_pattern, ResultsCheckFn fn) { + check_patterns.emplace_back(entry_pattern, fn); +} + +// check the results of all subscribed benchmarks +void ResultsChecker::CheckResults(std::stringstream& output) { + // first reset the stream to the start + { + auto start = std::ios::streampos(0); + // clear before calling tellg() + output.clear(); + // seek to zero only when needed + if(output.tellg() > start) output.seekg(start); + // and just in case + output.clear(); + } + // now go over every line and publish it to the ResultsChecker + std::string line; + bool on_first = true; + while (output.eof() == false) { + CHECK(output.good()); + std::getline(output, line); + if (on_first) { + SetHeader_(line); // this is important + on_first = false; + continue; + } + SetValues_(line); + } + // finally we can call the subscribed check functions + for(const auto& p : check_patterns) { + VLOG(2) << "--------------------------------\n"; + VLOG(2) << "checking for benchmarks matching " << p.regex_str << "...\n"; + for(const auto& r : results) { + if(!p.regex->Match(r.name)) { + VLOG(2) << p.regex_str << " is not matched by " << r.name << "\n"; + continue; + } else { + VLOG(2) << p.regex_str << " is matched by " << r.name << "\n"; + } + VLOG(1) << "Checking results of " << r.name << ": ... \n"; + p.fn(r); + VLOG(1) << "Checking results of " << r.name << ": OK.\n"; + } + } +} + +// prepare for the names in this header +void ResultsChecker::SetHeader_(const std::string& csv_header) { + field_names = SplitCsv_(csv_header); +} + +// set the values for a benchmark +void ResultsChecker::SetValues_(const std::string& entry_csv_line) { + if(entry_csv_line.empty()) return; // some lines are empty + CHECK(!field_names.empty()); + auto vals = SplitCsv_(entry_csv_line); + CHECK_EQ(vals.size(), field_names.size()); + results.emplace_back(vals[0]); // vals[0] is the benchmark name + auto &entry = results.back(); + for (size_t i = 1, e = vals.size(); i < e; ++i) { + entry.values[field_names[i]] = vals[i]; + } +} + +// a quick'n'dirty csv splitter (eliminating quotes) +std::vector< std::string > ResultsChecker::SplitCsv_(const std::string& line) { + std::vector< std::string > out; + if(line.empty()) return out; + if(!field_names.empty()) out.reserve(field_names.size()); + size_t prev = 0, pos = line.find_first_of(','), curr = pos; + while(pos != line.npos) { + CHECK(curr > 0); + if(line[prev] == '"') ++prev; + if(line[curr-1] == '"') --curr; + out.push_back(line.substr(prev, curr-prev)); + prev = pos + 1; + pos = line.find_first_of(',', pos + 1); + curr = pos; + } + curr = line.size(); + if(line[prev] == '"') ++prev; + if(line[curr-1] == '"') --curr; + out.push_back(line.substr(prev, curr-prev)); + return out; +} + +} // end namespace internal + +size_t AddChecker(const char* bm_name, ResultsCheckFn fn) +{ + auto &rc = internal::GetResultsChecker(); + rc.Add(bm_name, fn); + return rc.results.size(); +} + +int Results::NumThreads() const { + auto pos = name.find("/threads:"); + if(pos == name.npos) return 1; + auto end = name.find('/', pos + 9); + std::stringstream ss; + ss << name.substr(pos + 9, end); + int num = 1; + ss >> num; + CHECK(!ss.fail()); + return num; +} + +double Results::GetTime(BenchmarkTime which) const { + CHECK(which == kCpuTime || which == kRealTime); + const char *which_str = which == kCpuTime ? "cpu_time" : "real_time"; + double val = GetAs< double >(which_str); + auto unit = Get("time_unit"); + CHECK(unit); + if(*unit == "ns") { + return val * 1.e-9; + } else if(*unit == "us") { + return val * 1.e-6; + } else if(*unit == "ms") { + return val * 1.e-3; + } else if(*unit == "s") { + return val; + } else { + CHECK(1 == 0) << "unknown time unit: " << *unit; + return 0; + } +} + +// ========================================================================= // +// -------------------------- Public API Definitions------------------------ // +// ========================================================================= // + +TestCase::TestCase(std::string re, int rule) + : regex_str(std::move(re)), + match_rule(rule), + substituted_regex(internal::PerformSubstitutions(regex_str)), + regex(std::make_shared()) { + std::string err_str; + regex->Init(substituted_regex,& err_str); + CHECK(err_str.empty()) << "Could not construct regex \"" << substituted_regex + << "\"" + << "\n originally \"" << regex_str << "\"" + << "\n got error: " << err_str; +} + +int AddCases(TestCaseID ID, std::initializer_list il) { + auto& L = internal::GetTestCaseList(ID); + L.insert(L.end(), il); + return 0; +} + +int SetSubstitutions( + std::initializer_list> il) { + auto& subs = internal::GetSubstitutions(); + for (auto KV : il) { + bool exists = false; + KV.second = internal::PerformSubstitutions(KV.second); + for (auto& EKV : subs) { + if (EKV.first == KV.first) { + EKV.second = std::move(KV.second); + exists = true; + break; + } + } + if (!exists) subs.push_back(std::move(KV)); + } + return 0; +} + +void RunOutputTests(int argc, char* argv[]) { + using internal::GetTestCaseList; + benchmark::Initialize(&argc, argv); + auto options = benchmark::internal::GetOutputOptions(/*force_no_color*/true); + benchmark::ConsoleReporter CR(options); + benchmark::JSONReporter JR; + benchmark::CSVReporter CSVR; + struct ReporterTest { + const char* name; + std::vector& output_cases; + std::vector& error_cases; + benchmark::BenchmarkReporter& reporter; + std::stringstream out_stream; + std::stringstream err_stream; + + ReporterTest(const char* n, std::vector& out_tc, + std::vector& err_tc, + benchmark::BenchmarkReporter& br) + : name(n), output_cases(out_tc), error_cases(err_tc), reporter(br) { + reporter.SetOutputStream(&out_stream); + reporter.SetErrorStream(&err_stream); + } + } TestCases[] = { + {"ConsoleReporter", GetTestCaseList(TC_ConsoleOut), + GetTestCaseList(TC_ConsoleErr), CR}, + {"JSONReporter", GetTestCaseList(TC_JSONOut), GetTestCaseList(TC_JSONErr), + JR}, + {"CSVReporter", GetTestCaseList(TC_CSVOut), GetTestCaseList(TC_CSVErr), + CSVR}, + }; + + // Create the test reporter and run the benchmarks. + std::cout << "Running benchmarks...\n"; + internal::TestReporter test_rep({&CR, &JR, &CSVR}); + benchmark::RunSpecifiedBenchmarks(&test_rep); + + for (auto& rep_test : TestCases) { + std::string msg = std::string("\nTesting ") + rep_test.name + " Output\n"; + std::string banner(msg.size() - 1, '-'); + std::cout << banner << msg << banner << "\n"; + + std::cerr << rep_test.err_stream.str(); + std::cout << rep_test.out_stream.str(); + + internal::CheckCases(rep_test.error_cases, rep_test.err_stream); + internal::CheckCases(rep_test.output_cases, rep_test.out_stream); + + std::cout << "\n"; + } + + // now that we know the output is as expected, we can dispatch + // the checks to subscribees. + auto &csv = TestCases[2]; + // would use == but gcc spits a warning + CHECK(std::strcmp(csv.name, "CSVReporter") == 0); + internal::GetResultsChecker().CheckResults(csv.out_stream); +} diff --git a/test/register_benchmark_test.cc b/test/register_benchmark_test.cc new file mode 100644 index 0000000..2769b7a --- /dev/null +++ b/test/register_benchmark_test.cc @@ -0,0 +1,182 @@ + +#undef NDEBUG +#include +#include + +#include "../src/check.h" // NOTE: check.h is for internal use only! +#include "benchmark/benchmark.h" + +namespace { + +class TestReporter : public benchmark::ConsoleReporter { + public: + virtual void ReportRuns(const std::vector& report) { + all_runs_.insert(all_runs_.end(), begin(report), end(report)); + ConsoleReporter::ReportRuns(report); + } + + std::vector all_runs_; +}; + +struct TestCase { + std::string name; + const char* label; + // Note: not explicit as we rely on it being converted through ADD_CASES. + TestCase(const char* xname) : TestCase(xname, nullptr) {} + TestCase(const char* xname, const char* xlabel) + : name(xname), label(xlabel) {} + + typedef benchmark::BenchmarkReporter::Run Run; + + void CheckRun(Run const& run) const { + CHECK(name == run.benchmark_name) << "expected " << name << " got " + << run.benchmark_name; + if (label) { + CHECK(run.report_label == label) << "expected " << label << " got " + << run.report_label; + } else { + CHECK(run.report_label == ""); + } + } +}; + +std::vector ExpectedResults; + +int AddCases(std::initializer_list const& v) { + for (auto N : v) { + ExpectedResults.push_back(N); + } + return 0; +} + +#define CONCAT(x, y) CONCAT2(x, y) +#define CONCAT2(x, y) x##y +#define ADD_CASES(...) int CONCAT(dummy, __LINE__) = AddCases({__VA_ARGS__}) + +} // end namespace + +typedef benchmark::internal::Benchmark* ReturnVal; + +//----------------------------------------------------------------------------// +// Test RegisterBenchmark with no additional arguments +//----------------------------------------------------------------------------// +void BM_function(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_function); +ReturnVal dummy = benchmark::RegisterBenchmark( + "BM_function_manual_registration", BM_function); +ADD_CASES({"BM_function"}, {"BM_function_manual_registration"}); + +//----------------------------------------------------------------------------// +// Test RegisterBenchmark with additional arguments +// Note: GCC <= 4.8 do not support this form of RegisterBenchmark because they +// reject the variadic pack expansion of lambda captures. +//----------------------------------------------------------------------------// +#ifndef BENCHMARK_HAS_NO_VARIADIC_REGISTER_BENCHMARK + +void BM_extra_args(benchmark::State& st, const char* label) { + while (st.KeepRunning()) { + } + st.SetLabel(label); +} +int RegisterFromFunction() { + std::pair cases[] = { + {"test1", "One"}, {"test2", "Two"}, {"test3", "Three"}}; + for (auto const& c : cases) + benchmark::RegisterBenchmark(c.first, &BM_extra_args, c.second); + return 0; +} +int dummy2 = RegisterFromFunction(); +ADD_CASES({"test1", "One"}, {"test2", "Two"}, {"test3", "Three"}); + +#endif // BENCHMARK_HAS_NO_VARIADIC_REGISTER_BENCHMARK + +//----------------------------------------------------------------------------// +// Test RegisterBenchmark with different callable types +//----------------------------------------------------------------------------// + +struct CustomFixture { + void operator()(benchmark::State& st) { + while (st.KeepRunning()) { + } + } +}; + +void TestRegistrationAtRuntime() { +#ifdef BENCHMARK_HAS_CXX11 + { + CustomFixture fx; + benchmark::RegisterBenchmark("custom_fixture", fx); + AddCases({"custom_fixture"}); + } +#endif +#ifndef BENCHMARK_HAS_NO_VARIADIC_REGISTER_BENCHMARK + { + const char* x = "42"; + auto capturing_lam = [=](benchmark::State& st) { + while (st.KeepRunning()) { + } + st.SetLabel(x); + }; + benchmark::RegisterBenchmark("lambda_benchmark", capturing_lam); + AddCases({{"lambda_benchmark", x}}); + } +#endif +} + +// Test that all benchmarks, registered at either during static init or runtime, +// are run and the results are passed to the reported. +void RunTestOne() { + TestRegistrationAtRuntime(); + + TestReporter test_reporter; + benchmark::RunSpecifiedBenchmarks(&test_reporter); + + typedef benchmark::BenchmarkReporter::Run Run; + auto EB = ExpectedResults.begin(); + + for (Run const& run : test_reporter.all_runs_) { + assert(EB != ExpectedResults.end()); + EB->CheckRun(run); + ++EB; + } + assert(EB == ExpectedResults.end()); +} + +// Test that ClearRegisteredBenchmarks() clears all previously registered +// benchmarks. +// Also test that new benchmarks can be registered and ran afterwards. +void RunTestTwo() { + assert(ExpectedResults.size() != 0 && + "must have at least one registered benchmark"); + ExpectedResults.clear(); + benchmark::ClearRegisteredBenchmarks(); + + TestReporter test_reporter; + size_t num_ran = benchmark::RunSpecifiedBenchmarks(&test_reporter); + assert(num_ran == 0); + assert(test_reporter.all_runs_.begin() == test_reporter.all_runs_.end()); + + TestRegistrationAtRuntime(); + num_ran = benchmark::RunSpecifiedBenchmarks(&test_reporter); + assert(num_ran == ExpectedResults.size()); + + typedef benchmark::BenchmarkReporter::Run Run; + auto EB = ExpectedResults.begin(); + + for (Run const& run : test_reporter.all_runs_) { + assert(EB != ExpectedResults.end()); + EB->CheckRun(run); + ++EB; + } + assert(EB == ExpectedResults.end()); +} + +int main(int argc, char* argv[]) { + benchmark::Initialize(&argc, argv); + + RunTestOne(); + RunTestTwo(); +} diff --git a/test/reporter_output_test.cc b/test/reporter_output_test.cc new file mode 100644 index 0000000..4a48143 --- /dev/null +++ b/test/reporter_output_test.cc @@ -0,0 +1,256 @@ + +#undef NDEBUG +#include + +#include "benchmark/benchmark.h" +#include "output_test.h" + +// ========================================================================= // +// ---------------------- Testing Prologue Output -------------------------- // +// ========================================================================= // + +ADD_CASES(TC_ConsoleOut, + {{"^[-]+$", MR_Next}, + {"^Benchmark %s Time %s CPU %s Iterations$", MR_Next}, + {"^[-]+$", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"%csv_header"}}); + +// ========================================================================= // +// ------------------------ Testing Basic Output --------------------------- // +// ========================================================================= // + +void BM_basic(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_basic); + +ADD_CASES(TC_ConsoleOut, {{"^BM_basic %console_report$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_basic\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\"$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_basic\",%csv_report$"}}); + +// ========================================================================= // +// ------------------------ Testing Bytes per Second Output ---------------- // +// ========================================================================= // + +void BM_bytes_per_second(benchmark::State& state) { + while (state.KeepRunning()) { + } + state.SetBytesProcessed(1); +} +BENCHMARK(BM_bytes_per_second); + +ADD_CASES(TC_ConsoleOut, + {{"^BM_bytes_per_second %console_report +%floatB/s$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_bytes_per_second\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"bytes_per_second\": %int$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_bytes_per_second\",%csv_bytes_report$"}}); + +// ========================================================================= // +// ------------------------ Testing Items per Second Output ---------------- // +// ========================================================================= // + +void BM_items_per_second(benchmark::State& state) { + while (state.KeepRunning()) { + } + state.SetItemsProcessed(1); +} +BENCHMARK(BM_items_per_second); + +ADD_CASES(TC_ConsoleOut, + {{"^BM_items_per_second %console_report +%float items/s$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_items_per_second\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"items_per_second\": %int$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_items_per_second\",%csv_items_report$"}}); + +// ========================================================================= // +// ------------------------ Testing Label Output --------------------------- // +// ========================================================================= // + +void BM_label(benchmark::State& state) { + while (state.KeepRunning()) { + } + state.SetLabel("some label"); +} +BENCHMARK(BM_label); + +ADD_CASES(TC_ConsoleOut, {{"^BM_label %console_report some label$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_label\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"label\": \"some label\"$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_label\",%csv_label_report_begin\"some " + "label\"%csv_label_report_end$"}}); + +// ========================================================================= // +// ------------------------ Testing Error Output --------------------------- // +// ========================================================================= // + +void BM_error(benchmark::State& state) { + state.SkipWithError("message"); + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_error); +ADD_CASES(TC_ConsoleOut, {{"^BM_error[ ]+ERROR OCCURRED: 'message'$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_error\",$"}, + {"\"error_occurred\": true,$", MR_Next}, + {"\"error_message\": \"message\",$", MR_Next}}); + +ADD_CASES(TC_CSVOut, {{"^\"BM_error\",,,,,,,,true,\"message\"$"}}); + +// ========================================================================= // +// ------------------------ Testing No Arg Name Output ----------------------- +// // +// ========================================================================= // + +void BM_no_arg_name(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_no_arg_name)->Arg(3); +ADD_CASES(TC_ConsoleOut, {{"^BM_no_arg_name/3 %console_report$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_no_arg_name/3\",$"}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_no_arg_name/3\",%csv_report$"}}); + +// ========================================================================= // +// ------------------------ Testing Arg Name Output ----------------------- // +// ========================================================================= // + +void BM_arg_name(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_arg_name)->ArgName("first")->Arg(3); +ADD_CASES(TC_ConsoleOut, {{"^BM_arg_name/first:3 %console_report$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_arg_name/first:3\",$"}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_arg_name/first:3\",%csv_report$"}}); + +// ========================================================================= // +// ------------------------ Testing Arg Names Output ----------------------- // +// ========================================================================= // + +void BM_arg_names(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_arg_names)->Args({2, 5, 4})->ArgNames({"first", "", "third"}); +ADD_CASES(TC_ConsoleOut, + {{"^BM_arg_names/first:2/5/third:4 %console_report$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_arg_names/first:2/5/third:4\",$"}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_arg_names/first:2/5/third:4\",%csv_report$"}}); + +// ========================================================================= // +// ----------------------- Testing Complexity Output ----------------------- // +// ========================================================================= // + +void BM_Complexity_O1(benchmark::State& state) { + while (state.KeepRunning()) { + } + state.SetComplexityN(state.range(0)); +} +BENCHMARK(BM_Complexity_O1)->Range(1, 1 << 18)->Complexity(benchmark::o1); +SET_SUBSTITUTIONS({{"%bigOStr", "[ ]* %float \\([0-9]+\\)"}, + {"%RMS", "[ ]*[0-9]+ %"}}); +ADD_CASES(TC_ConsoleOut, {{"^BM_Complexity_O1_BigO %bigOStr %bigOStr[ ]*$"}, + {"^BM_Complexity_O1_RMS %RMS %RMS[ ]*$"}}); + +// ========================================================================= // +// ----------------------- Testing Aggregate Output ------------------------ // +// ========================================================================= // + +// Test that non-aggregate data is printed by default +void BM_Repeat(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_Repeat)->Repetitions(3); +ADD_CASES(TC_ConsoleOut, {{"^BM_Repeat/repeats:3 %console_report$"}, + {"^BM_Repeat/repeats:3 %console_report$"}, + {"^BM_Repeat/repeats:3 %console_report$"}, + {"^BM_Repeat/repeats:3_mean %console_report$"}, + {"^BM_Repeat/repeats:3_stddev %console_report$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Repeat/repeats:3\",$"}, + {"\"name\": \"BM_Repeat/repeats:3\",$"}, + {"\"name\": \"BM_Repeat/repeats:3\",$"}, + {"\"name\": \"BM_Repeat/repeats:3_mean\",$"}, + {"\"name\": \"BM_Repeat/repeats:3_stddev\",$"}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Repeat/repeats:3\",%csv_report$"}, + {"^\"BM_Repeat/repeats:3\",%csv_report$"}, + {"^\"BM_Repeat/repeats:3\",%csv_report$"}, + {"^\"BM_Repeat/repeats:3_mean\",%csv_report$"}, + {"^\"BM_Repeat/repeats:3_stddev\",%csv_report$"}}); + +// Test that a non-repeated test still prints non-aggregate results even when +// only-aggregate reports have been requested +void BM_RepeatOnce(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_RepeatOnce)->Repetitions(1)->ReportAggregatesOnly(); +ADD_CASES(TC_ConsoleOut, {{"^BM_RepeatOnce/repeats:1 %console_report$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_RepeatOnce/repeats:1\",$"}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_RepeatOnce/repeats:1\",%csv_report$"}}); + +// Test that non-aggregate data is not reported +void BM_SummaryRepeat(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_SummaryRepeat)->Repetitions(3)->ReportAggregatesOnly(); +ADD_CASES(TC_ConsoleOut, + {{".*BM_SummaryRepeat/repeats:3 ", MR_Not}, + {"^BM_SummaryRepeat/repeats:3_mean %console_report$"}, + {"^BM_SummaryRepeat/repeats:3_stddev %console_report$"}}); +ADD_CASES(TC_JSONOut, {{".*BM_SummaryRepeat/repeats:3 ", MR_Not}, + {"\"name\": \"BM_SummaryRepeat/repeats:3_mean\",$"}, + {"\"name\": \"BM_SummaryRepeat/repeats:3_stddev\",$"}}); +ADD_CASES(TC_CSVOut, {{".*BM_SummaryRepeat/repeats:3 ", MR_Not}, + {"^\"BM_SummaryRepeat/repeats:3_mean\",%csv_report$"}, + {"^\"BM_SummaryRepeat/repeats:3_stddev\",%csv_report$"}}); + +void BM_RepeatTimeUnit(benchmark::State& state) { + while (state.KeepRunning()) { + } +} +BENCHMARK(BM_RepeatTimeUnit) + ->Repetitions(3) + ->ReportAggregatesOnly() + ->Unit(benchmark::kMicrosecond); +ADD_CASES(TC_ConsoleOut, + {{".*BM_RepeatTimeUnit/repeats:3 ", MR_Not}, + {"^BM_RepeatTimeUnit/repeats:3_mean %console_us_report$"}, + {"^BM_RepeatTimeUnit/repeats:3_stddev %console_us_report$"}}); +ADD_CASES(TC_JSONOut, {{".*BM_RepeatTimeUnit/repeats:3 ", MR_Not}, + {"\"name\": \"BM_RepeatTimeUnit/repeats:3_mean\",$"}, + {"\"time_unit\": \"us\",?$"}, + {"\"name\": \"BM_RepeatTimeUnit/repeats:3_stddev\",$"}, + {"\"time_unit\": \"us\",?$"}}); +ADD_CASES(TC_CSVOut, + {{".*BM_RepeatTimeUnit/repeats:3 ", MR_Not}, + {"^\"BM_RepeatTimeUnit/repeats:3_mean\",%csv_us_report$"}, + {"^\"BM_RepeatTimeUnit/repeats:3_stddev\",%csv_us_report$"}}); + +// ========================================================================= // +// --------------------------- TEST CASES END ------------------------------ // +// ========================================================================= // + +int main(int argc, char* argv[]) { RunOutputTests(argc, argv); } diff --git a/test/skip_with_error_test.cc b/test/skip_with_error_test.cc new file mode 100644 index 0000000..b74d33c --- /dev/null +++ b/test/skip_with_error_test.cc @@ -0,0 +1,150 @@ + +#undef NDEBUG +#include +#include + +#include "../src/check.h" // NOTE: check.h is for internal use only! +#include "benchmark/benchmark.h" + +namespace { + +class TestReporter : public benchmark::ConsoleReporter { + public: + virtual bool ReportContext(const Context& context) { + return ConsoleReporter::ReportContext(context); + }; + + virtual void ReportRuns(const std::vector& report) { + all_runs_.insert(all_runs_.end(), begin(report), end(report)); + ConsoleReporter::ReportRuns(report); + } + + TestReporter() {} + virtual ~TestReporter() {} + + mutable std::vector all_runs_; +}; + +struct TestCase { + std::string name; + bool error_occurred; + std::string error_message; + + typedef benchmark::BenchmarkReporter::Run Run; + + void CheckRun(Run const& run) const { + CHECK(name == run.benchmark_name) << "expected " << name << " got " + << run.benchmark_name; + CHECK(error_occurred == run.error_occurred); + CHECK(error_message == run.error_message); + if (error_occurred) { + // CHECK(run.iterations == 0); + } else { + CHECK(run.iterations != 0); + } + } +}; + +std::vector ExpectedResults; + +int AddCases(const char* base_name, std::initializer_list const& v) { + for (auto TC : v) { + TC.name = base_name + TC.name; + ExpectedResults.push_back(std::move(TC)); + } + return 0; +} + +#define CONCAT(x, y) CONCAT2(x, y) +#define CONCAT2(x, y) x##y +#define ADD_CASES(...) int CONCAT(dummy, __LINE__) = AddCases(__VA_ARGS__) + +} // end namespace + +void BM_error_before_running(benchmark::State& state) { + state.SkipWithError("error message"); + while (state.KeepRunning()) { + assert(false); + } +} +BENCHMARK(BM_error_before_running); +ADD_CASES("BM_error_before_running", {{"", true, "error message"}}); + +void BM_error_during_running(benchmark::State& state) { + int first_iter = true; + while (state.KeepRunning()) { + if (state.range(0) == 1 && state.thread_index <= (state.threads / 2)) { + assert(first_iter); + first_iter = false; + state.SkipWithError("error message"); + } else { + state.PauseTiming(); + state.ResumeTiming(); + } + } +} +BENCHMARK(BM_error_during_running)->Arg(1)->Arg(2)->ThreadRange(1, 8); +ADD_CASES("BM_error_during_running", {{"/1/threads:1", true, "error message"}, + {"/1/threads:2", true, "error message"}, + {"/1/threads:4", true, "error message"}, + {"/1/threads:8", true, "error message"}, + {"/2/threads:1", false, ""}, + {"/2/threads:2", false, ""}, + {"/2/threads:4", false, ""}, + {"/2/threads:8", false, ""}}); + +void BM_error_after_running(benchmark::State& state) { + while (state.KeepRunning()) { + benchmark::DoNotOptimize(state.iterations()); + } + if (state.thread_index <= (state.threads / 2)) + state.SkipWithError("error message"); +} +BENCHMARK(BM_error_after_running)->ThreadRange(1, 8); +ADD_CASES("BM_error_after_running", {{"/threads:1", true, "error message"}, + {"/threads:2", true, "error message"}, + {"/threads:4", true, "error message"}, + {"/threads:8", true, "error message"}}); + +void BM_error_while_paused(benchmark::State& state) { + bool first_iter = true; + while (state.KeepRunning()) { + if (state.range(0) == 1 && state.thread_index <= (state.threads / 2)) { + assert(first_iter); + first_iter = false; + state.PauseTiming(); + state.SkipWithError("error message"); + } else { + state.PauseTiming(); + state.ResumeTiming(); + } + } +} +BENCHMARK(BM_error_while_paused)->Arg(1)->Arg(2)->ThreadRange(1, 8); +ADD_CASES("BM_error_while_paused", {{"/1/threads:1", true, "error message"}, + {"/1/threads:2", true, "error message"}, + {"/1/threads:4", true, "error message"}, + {"/1/threads:8", true, "error message"}, + {"/2/threads:1", false, ""}, + {"/2/threads:2", false, ""}, + {"/2/threads:4", false, ""}, + {"/2/threads:8", false, ""}}); + +int main(int argc, char* argv[]) { + benchmark::Initialize(&argc, argv); + + TestReporter test_reporter; + benchmark::RunSpecifiedBenchmarks(&test_reporter); + + typedef benchmark::BenchmarkReporter::Run Run; + auto EB = ExpectedResults.begin(); + + for (Run const& run : test_reporter.all_runs_) { + assert(EB != ExpectedResults.end()); + EB->CheckRun(run); + ++EB; + } + assert(EB == ExpectedResults.end()); + + return 0; +} diff --git a/test/user_counters_tabular_test.cc b/test/user_counters_tabular_test.cc new file mode 100644 index 0000000..5fc5b4d --- /dev/null +++ b/test/user_counters_tabular_test.cc @@ -0,0 +1,250 @@ + +#undef NDEBUG + +#include "benchmark/benchmark.h" +#include "output_test.h" + +// @todo: this checks the full output at once; the rule for +// CounterSet1 was failing because it was not matching "^[-]+$". +// @todo: check that the counters are vertically aligned. +ADD_CASES(TC_ConsoleOut, { +// keeping these lines long improves readability, so: +// clang-format off + {"^[-]+$", MR_Next}, + {"^Benchmark %s Time %s CPU %s Iterations %s Bar %s Bat %s Baz %s Foo %s Frob %s Lob$", MR_Next}, + {"^[-]+$", MR_Next}, + {"^BM_Counters_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_Counters_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_Counters_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_Counters_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_Counters_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterRates_Tabular/threads:%int %console_report [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s$", MR_Next}, + {"^BM_CounterRates_Tabular/threads:%int %console_report [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s$", MR_Next}, + {"^BM_CounterRates_Tabular/threads:%int %console_report [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s$", MR_Next}, + {"^BM_CounterRates_Tabular/threads:%int %console_report [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s$", MR_Next}, + {"^BM_CounterRates_Tabular/threads:%int %console_report [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s [ ]*%hrfloat/s$", MR_Next}, + {"^[-]+$", MR_Next}, + {"^Benchmark %s Time %s CPU %s Iterations %s Bar %s Baz %s Foo$", MR_Next}, + {"^[-]+$", MR_Next}, + {"^BM_CounterSet0_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet0_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet0_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet0_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet0_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet1_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet1_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet1_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet1_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet1_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^[-]+$", MR_Next}, + {"^Benchmark %s Time %s CPU %s Iterations %s Bat %s Baz %s Foo$", MR_Next}, + {"^[-]+$", MR_Next}, + {"^BM_CounterSet2_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet2_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet2_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet2_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$", MR_Next}, + {"^BM_CounterSet2_Tabular/threads:%int %console_report [ ]*%hrfloat [ ]*%hrfloat [ ]*%hrfloat$"}, +// clang-format on +}); +ADD_CASES(TC_CSVOut, {{"%csv_header," + "\"Bar\",\"Bat\",\"Baz\",\"Foo\",\"Frob\",\"Lob\""}}); + +// ========================================================================= // +// ------------------------- Tabular Counters Output ----------------------- // +// ========================================================================= // + +void BM_Counters_Tabular(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters.insert({ + {"Foo", { 1, bm::Counter::kAvgThreads}}, + {"Bar", { 2, bm::Counter::kAvgThreads}}, + {"Baz", { 4, bm::Counter::kAvgThreads}}, + {"Bat", { 8, bm::Counter::kAvgThreads}}, + {"Frob", {16, bm::Counter::kAvgThreads}}, + {"Lob", {32, bm::Counter::kAvgThreads}}, + }); +} +BENCHMARK(BM_Counters_Tabular)->ThreadRange(1, 16); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Counters_Tabular/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"Bar\": %float,$", MR_Next}, + {"\"Bat\": %float,$", MR_Next}, + {"\"Baz\": %float,$", MR_Next}, + {"\"Foo\": %float,$", MR_Next}, + {"\"Frob\": %float,$", MR_Next}, + {"\"Lob\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Counters_Tabular/threads:%int\",%csv_report," + "%float,%float,%float,%float,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckTabular(Results const& e) { + CHECK_COUNTER_VALUE(e, int, "Foo", EQ, 1); + CHECK_COUNTER_VALUE(e, int, "Bar", EQ, 2); + CHECK_COUNTER_VALUE(e, int, "Baz", EQ, 4); + CHECK_COUNTER_VALUE(e, int, "Bat", EQ, 8); + CHECK_COUNTER_VALUE(e, int, "Frob", EQ, 16); + CHECK_COUNTER_VALUE(e, int, "Lob", EQ, 32); +} +CHECK_BENCHMARK_RESULTS("BM_Counters_Tabular/threads:%int", &CheckTabular); + +// ========================================================================= // +// -------------------- Tabular+Rate Counters Output ----------------------- // +// ========================================================================= // + +void BM_CounterRates_Tabular(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters.insert({ + {"Foo", { 1, bm::Counter::kAvgThreadsRate}}, + {"Bar", { 2, bm::Counter::kAvgThreadsRate}}, + {"Baz", { 4, bm::Counter::kAvgThreadsRate}}, + {"Bat", { 8, bm::Counter::kAvgThreadsRate}}, + {"Frob", {16, bm::Counter::kAvgThreadsRate}}, + {"Lob", {32, bm::Counter::kAvgThreadsRate}}, + }); +} +BENCHMARK(BM_CounterRates_Tabular)->ThreadRange(1, 16); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_CounterRates_Tabular/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"Bar\": %float,$", MR_Next}, + {"\"Bat\": %float,$", MR_Next}, + {"\"Baz\": %float,$", MR_Next}, + {"\"Foo\": %float,$", MR_Next}, + {"\"Frob\": %float,$", MR_Next}, + {"\"Lob\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_CounterRates_Tabular/threads:%int\",%csv_report," + "%float,%float,%float,%float,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckTabularRate(Results const& e) { + double t = e.DurationCPUTime(); + CHECK_FLOAT_COUNTER_VALUE(e, "Foo", EQ, 1./t, 0.001); + CHECK_FLOAT_COUNTER_VALUE(e, "Bar", EQ, 2./t, 0.001); + CHECK_FLOAT_COUNTER_VALUE(e, "Baz", EQ, 4./t, 0.001); + CHECK_FLOAT_COUNTER_VALUE(e, "Bat", EQ, 8./t, 0.001); + CHECK_FLOAT_COUNTER_VALUE(e, "Frob", EQ, 16./t, 0.001); + CHECK_FLOAT_COUNTER_VALUE(e, "Lob", EQ, 32./t, 0.001); +} +CHECK_BENCHMARK_RESULTS("BM_CounterRates_Tabular/threads:%int", + &CheckTabularRate); + +// ========================================================================= // +// ------------------------- Tabular Counters Output ----------------------- // +// ========================================================================= // + +// set only some of the counters +void BM_CounterSet0_Tabular(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters.insert({ + {"Foo", {10, bm::Counter::kAvgThreads}}, + {"Bar", {20, bm::Counter::kAvgThreads}}, + {"Baz", {40, bm::Counter::kAvgThreads}}, + }); +} +BENCHMARK(BM_CounterSet0_Tabular)->ThreadRange(1, 16); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_CounterSet0_Tabular/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"Bar\": %float,$", MR_Next}, + {"\"Baz\": %float,$", MR_Next}, + {"\"Foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_CounterSet0_Tabular/threads:%int\",%csv_report," + "%float,,%float,%float,,"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckSet0(Results const& e) { + CHECK_COUNTER_VALUE(e, int, "Foo", EQ, 10); + CHECK_COUNTER_VALUE(e, int, "Bar", EQ, 20); + CHECK_COUNTER_VALUE(e, int, "Baz", EQ, 40); +} +CHECK_BENCHMARK_RESULTS("BM_CounterSet0_Tabular", &CheckSet0); + +// again. +void BM_CounterSet1_Tabular(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters.insert({ + {"Foo", {15, bm::Counter::kAvgThreads}}, + {"Bar", {25, bm::Counter::kAvgThreads}}, + {"Baz", {45, bm::Counter::kAvgThreads}}, + }); +} +BENCHMARK(BM_CounterSet1_Tabular)->ThreadRange(1, 16); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_CounterSet1_Tabular/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"Bar\": %float,$", MR_Next}, + {"\"Baz\": %float,$", MR_Next}, + {"\"Foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_CounterSet1_Tabular/threads:%int\",%csv_report," + "%float,,%float,%float,,"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckSet1(Results const& e) { + CHECK_COUNTER_VALUE(e, int, "Foo", EQ, 15); + CHECK_COUNTER_VALUE(e, int, "Bar", EQ, 25); + CHECK_COUNTER_VALUE(e, int, "Baz", EQ, 45); +} +CHECK_BENCHMARK_RESULTS("BM_CounterSet1_Tabular/threads:%int", &CheckSet1); + +// ========================================================================= // +// ------------------------- Tabular Counters Output ----------------------- // +// ========================================================================= // + +// set only some of the counters, different set now. +void BM_CounterSet2_Tabular(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters.insert({ + {"Foo", {10, bm::Counter::kAvgThreads}}, + {"Bat", {30, bm::Counter::kAvgThreads}}, + {"Baz", {40, bm::Counter::kAvgThreads}}, + }); +} +BENCHMARK(BM_CounterSet2_Tabular)->ThreadRange(1, 16); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_CounterSet2_Tabular/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"Bat\": %float,$", MR_Next}, + {"\"Baz\": %float,$", MR_Next}, + {"\"Foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_CounterSet2_Tabular/threads:%int\",%csv_report," + ",%float,%float,%float,,"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckSet2(Results const& e) { + CHECK_COUNTER_VALUE(e, int, "Foo", EQ, 10); + CHECK_COUNTER_VALUE(e, int, "Bat", EQ, 30); + CHECK_COUNTER_VALUE(e, int, "Baz", EQ, 40); +} +CHECK_BENCHMARK_RESULTS("BM_CounterSet2_Tabular", &CheckSet2); + +// ========================================================================= // +// --------------------------- TEST CASES END ------------------------------ // +// ========================================================================= // + +int main(int argc, char* argv[]) { RunOutputTests(argc, argv); } diff --git a/test/user_counters_test.cc b/test/user_counters_test.cc new file mode 100644 index 0000000..66df48b --- /dev/null +++ b/test/user_counters_test.cc @@ -0,0 +1,217 @@ + +#undef NDEBUG + +#include "benchmark/benchmark.h" +#include "output_test.h" + +// ========================================================================= // +// ---------------------- Testing Prologue Output -------------------------- // +// ========================================================================= // + +ADD_CASES(TC_ConsoleOut, + {{"^[-]+$", MR_Next}, + {"^Benchmark %s Time %s CPU %s Iterations UserCounters...$", MR_Next}, + {"^[-]+$", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"%csv_header,\"bar\",\"foo\""}}); + +// ========================================================================= // +// ------------------------- Simple Counters Output ------------------------ // +// ========================================================================= // + +void BM_Counters_Simple(benchmark::State& state) { + while (state.KeepRunning()) { + } + state.counters["foo"] = 1; + state.counters["bar"] = 2 * (double)state.iterations(); +} +BENCHMARK(BM_Counters_Simple); +ADD_CASES(TC_ConsoleOut, {{"^BM_Counters_Simple %console_report bar=%hrfloat foo=%hrfloat$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Counters_Simple\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"bar\": %float,$", MR_Next}, + {"\"foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Counters_Simple\",%csv_report,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckSimple(Results const& e) { + double its = e.GetAs< double >("iterations"); + CHECK_COUNTER_VALUE(e, int, "foo", EQ, 1); + // check that the value of bar is within 0.1% of the expected value + CHECK_FLOAT_COUNTER_VALUE(e, "bar", EQ, 2.*its, 0.001); +} +CHECK_BENCHMARK_RESULTS("BM_Counters_Simple", &CheckSimple); + +// ========================================================================= // +// --------------------- Counters+Items+Bytes/s Output --------------------- // +// ========================================================================= // + +namespace { int num_calls1 = 0; } +void BM_Counters_WithBytesAndItemsPSec(benchmark::State& state) { + while (state.KeepRunning()) { + } + state.counters["foo"] = 1; + state.counters["bar"] = ++num_calls1; + state.SetBytesProcessed(364); + state.SetItemsProcessed(150); +} +BENCHMARK(BM_Counters_WithBytesAndItemsPSec); +ADD_CASES(TC_ConsoleOut, + {{"^BM_Counters_WithBytesAndItemsPSec %console_report " + "bar=%hrfloat foo=%hrfloat +%hrfloatB/s +%hrfloat items/s$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Counters_WithBytesAndItemsPSec\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"bytes_per_second\": %int,$", MR_Next}, + {"\"items_per_second\": %int,$", MR_Next}, + {"\"bar\": %float,$", MR_Next}, + {"\"foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Counters_WithBytesAndItemsPSec\"," + "%csv_bytes_items_report,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckBytesAndItemsPSec(Results const& e) { + double t = e.DurationCPUTime(); // this (and not real time) is the time used + CHECK_COUNTER_VALUE(e, int, "foo", EQ, 1); + CHECK_COUNTER_VALUE(e, int, "bar", EQ, num_calls1); + // check that the values are within 0.1% of the expected values + CHECK_FLOAT_RESULT_VALUE(e, "bytes_per_second", EQ, 364./t, 0.001); + CHECK_FLOAT_RESULT_VALUE(e, "items_per_second", EQ, 150./t, 0.001); +} +CHECK_BENCHMARK_RESULTS("BM_Counters_WithBytesAndItemsPSec", + &CheckBytesAndItemsPSec); + +// ========================================================================= // +// ------------------------- Rate Counters Output -------------------------- // +// ========================================================================= // + +void BM_Counters_Rate(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters["foo"] = bm::Counter{1, bm::Counter::kIsRate}; + state.counters["bar"] = bm::Counter{2, bm::Counter::kIsRate}; +} +BENCHMARK(BM_Counters_Rate); +ADD_CASES(TC_ConsoleOut, {{"^BM_Counters_Rate %console_report bar=%hrfloat/s foo=%hrfloat/s$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Counters_Rate\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"bar\": %float,$", MR_Next}, + {"\"foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Counters_Rate\",%csv_report,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckRate(Results const& e) { + double t = e.DurationCPUTime(); // this (and not real time) is the time used + // check that the values are within 0.1% of the expected values + CHECK_FLOAT_COUNTER_VALUE(e, "foo", EQ, 1./t, 0.001); + CHECK_FLOAT_COUNTER_VALUE(e, "bar", EQ, 2./t, 0.001); +} +CHECK_BENCHMARK_RESULTS("BM_Counters_Rate", &CheckRate); + +// ========================================================================= // +// ------------------------- Thread Counters Output ------------------------ // +// ========================================================================= // + +void BM_Counters_Threads(benchmark::State& state) { + while (state.KeepRunning()) { + } + state.counters["foo"] = 1; + state.counters["bar"] = 2; +} +BENCHMARK(BM_Counters_Threads)->ThreadRange(1, 8); +ADD_CASES(TC_ConsoleOut, {{"^BM_Counters_Threads/threads:%int %console_report bar=%hrfloat foo=%hrfloat$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Counters_Threads/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"bar\": %float,$", MR_Next}, + {"\"foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Counters_Threads/threads:%int\",%csv_report,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckThreads(Results const& e) { + CHECK_COUNTER_VALUE(e, int, "foo", EQ, e.NumThreads()); + CHECK_COUNTER_VALUE(e, int, "bar", EQ, 2 * e.NumThreads()); +} +CHECK_BENCHMARK_RESULTS("BM_Counters_Threads/threads:%int", &CheckThreads); + +// ========================================================================= // +// ---------------------- ThreadAvg Counters Output ------------------------ // +// ========================================================================= // + +void BM_Counters_AvgThreads(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters["foo"] = bm::Counter{1, bm::Counter::kAvgThreads}; + state.counters["bar"] = bm::Counter{2, bm::Counter::kAvgThreads}; +} +BENCHMARK(BM_Counters_AvgThreads)->ThreadRange(1, 8); +ADD_CASES(TC_ConsoleOut, {{"^BM_Counters_AvgThreads/threads:%int %console_report bar=%hrfloat foo=%hrfloat$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Counters_AvgThreads/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"bar\": %float,$", MR_Next}, + {"\"foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Counters_AvgThreads/threads:%int\",%csv_report,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckAvgThreads(Results const& e) { + CHECK_COUNTER_VALUE(e, int, "foo", EQ, 1); + CHECK_COUNTER_VALUE(e, int, "bar", EQ, 2); +} +CHECK_BENCHMARK_RESULTS("BM_Counters_AvgThreads/threads:%int", + &CheckAvgThreads); + +// ========================================================================= // +// ---------------------- ThreadAvg Counters Output ------------------------ // +// ========================================================================= // + +void BM_Counters_AvgThreadsRate(benchmark::State& state) { + while (state.KeepRunning()) { + } + namespace bm = benchmark; + state.counters["foo"] = bm::Counter{1, bm::Counter::kAvgThreadsRate}; + state.counters["bar"] = bm::Counter{2, bm::Counter::kAvgThreadsRate}; +} +BENCHMARK(BM_Counters_AvgThreadsRate)->ThreadRange(1, 8); +ADD_CASES(TC_ConsoleOut, {{"^BM_Counters_AvgThreadsRate/threads:%int %console_report bar=%hrfloat/s foo=%hrfloat/s$"}}); +ADD_CASES(TC_JSONOut, {{"\"name\": \"BM_Counters_AvgThreadsRate/threads:%int\",$"}, + {"\"iterations\": %int,$", MR_Next}, + {"\"real_time\": %int,$", MR_Next}, + {"\"cpu_time\": %int,$", MR_Next}, + {"\"time_unit\": \"ns\",$", MR_Next}, + {"\"bar\": %float,$", MR_Next}, + {"\"foo\": %float$", MR_Next}, + {"}", MR_Next}}); +ADD_CASES(TC_CSVOut, {{"^\"BM_Counters_AvgThreadsRate/threads:%int\",%csv_report,%float,%float$"}}); +// VS2013 does not allow this function to be passed as a lambda argument +// to CHECK_BENCHMARK_RESULTS() +void CheckAvgThreadsRate(Results const& e) { + CHECK_FLOAT_COUNTER_VALUE(e, "foo", EQ, 1./e.DurationCPUTime(), 0.001); + CHECK_FLOAT_COUNTER_VALUE(e, "bar", EQ, 2./e.DurationCPUTime(), 0.001); +} +CHECK_BENCHMARK_RESULTS("BM_Counters_AvgThreadsRate/threads:%int", + &CheckAvgThreadsRate); + +// ========================================================================= // +// --------------------------- TEST CASES END ------------------------------ // +// ========================================================================= // + +int main(int argc, char* argv[]) { RunOutputTests(argc, argv); } diff --git a/tools/compare_bench.py b/tools/compare_bench.py new file mode 100755 index 0000000..d54baaa --- /dev/null +++ b/tools/compare_bench.py @@ -0,0 +1,68 @@ +#!/usr/bin/env python +""" +compare_bench.py - Compare two benchmarks or their results and report the + difference. +""" +import argparse +from argparse import ArgumentParser +import sys +import gbench +from gbench import util, report +from gbench.util import * + +def check_inputs(in1, in2, flags): + """ + Perform checking on the user provided inputs and diagnose any abnormalities + """ + in1_kind, in1_err = classify_input_file(in1) + in2_kind, in2_err = classify_input_file(in2) + output_file = find_benchmark_flag('--benchmark_out=', flags) + output_type = find_benchmark_flag('--benchmark_out_format=', flags) + if in1_kind == IT_Executable and in2_kind == IT_Executable and output_file: + print(("WARNING: '--benchmark_out=%s' will be passed to both " + "benchmarks causing it to be overwritten") % output_file) + if in1_kind == IT_JSON and in2_kind == IT_JSON and len(flags) > 0: + print("WARNING: passing --benchmark flags has no effect since both " + "inputs are JSON") + if output_type is not None and output_type != 'json': + print(("ERROR: passing '--benchmark_out_format=%s' to 'compare_bench.py`" + " is not supported.") % output_type) + sys.exit(1) + + +def main(): + parser = ArgumentParser( + description='compare the results of two benchmarks') + parser.add_argument( + 'test1', metavar='test1', type=str, nargs=1, + help='A benchmark executable or JSON output file') + parser.add_argument( + 'test2', metavar='test2', type=str, nargs=1, + help='A benchmark executable or JSON output file') + # FIXME this is a dummy argument which will never actually match + # any --benchmark flags but it helps generate a better usage message + parser.add_argument( + 'benchmark_options', metavar='benchmark_option', nargs='*', + help='Arguments to pass when running benchmark executables' + ) + args, unknown_args = parser.parse_known_args() + # Parse the command line flags + test1 = args.test1[0] + test2 = args.test2[0] + if args.benchmark_options: + print("Unrecognized positional argument arguments: '%s'" + % args.benchmark_options) + exit(1) + benchmark_options = unknown_args + check_inputs(test1, test2, benchmark_options) + # Run the benchmarks and report the results + json1 = gbench.util.run_or_load_benchmark(test1, benchmark_options) + json2 = gbench.util.run_or_load_benchmark(test2, benchmark_options) + output_lines = gbench.report.generate_difference_report(json1, json2) + print('Comparing %s to %s' % (test1, test2)) + for ln in output_lines: + print(ln) + + +if __name__ == '__main__': + main() diff --git a/tools/gbench/Inputs/test1_run1.json b/tools/gbench/Inputs/test1_run1.json new file mode 100644 index 0000000..37faed4 --- /dev/null +++ b/tools/gbench/Inputs/test1_run1.json @@ -0,0 +1,60 @@ +{ + "context": { + "date": "2016-08-02 17:44:46", + "num_cpus": 4, + "mhz_per_cpu": 4228, + "cpu_scaling_enabled": false, + "library_build_type": "release" + }, + "benchmarks": [ + { + "name": "BM_SameTimes", + "iterations": 1000, + "real_time": 10, + "cpu_time": 10, + "time_unit": "ns" + }, + { + "name": "BM_2xFaster", + "iterations": 1000, + "real_time": 50, + "cpu_time": 50, + "time_unit": "ns" + }, + { + "name": "BM_2xSlower", + "iterations": 1000, + "real_time": 50, + "cpu_time": 50, + "time_unit": "ns" + }, + { + "name": "BM_10PercentFaster", + "iterations": 1000, + "real_time": 100, + "cpu_time": 100, + "time_unit": "ns" + }, + { + "name": "BM_10PercentSlower", + "iterations": 1000, + "real_time": 100, + "cpu_time": 100, + "time_unit": "ns" + }, + { + "name": "BM_100xSlower", + "iterations": 1000, + "real_time": 100, + "cpu_time": 100, + "time_unit": "ns" + }, + { + "name": "BM_100xFaster", + "iterations": 1000, + "real_time": 10000, + "cpu_time": 10000, + "time_unit": "ns" + } + ] +} \ No newline at end of file diff --git a/tools/gbench/Inputs/test1_run2.json b/tools/gbench/Inputs/test1_run2.json new file mode 100644 index 0000000..aed5151 --- /dev/null +++ b/tools/gbench/Inputs/test1_run2.json @@ -0,0 +1,60 @@ +{ + "context": { + "date": "2016-08-02 17:44:46", + "num_cpus": 4, + "mhz_per_cpu": 4228, + "cpu_scaling_enabled": false, + "library_build_type": "release" + }, + "benchmarks": [ + { + "name": "BM_SameTimes", + "iterations": 1000, + "real_time": 10, + "cpu_time": 10, + "time_unit": "ns" + }, + { + "name": "BM_2xFaster", + "iterations": 1000, + "real_time": 25, + "cpu_time": 25, + "time_unit": "ns" + }, + { + "name": "BM_2xSlower", + "iterations": 20833333, + "real_time": 100, + "cpu_time": 100, + "time_unit": "ns" + }, + { + "name": "BM_10PercentFaster", + "iterations": 1000, + "real_time": 90, + "cpu_time": 90, + "time_unit": "ns" + }, + { + "name": "BM_10PercentSlower", + "iterations": 1000, + "real_time": 110, + "cpu_time": 110, + "time_unit": "ns" + }, + { + "name": "BM_100xSlower", + "iterations": 1000, + "real_time": 10000, + "cpu_time": 10000, + "time_unit": "ns" + }, + { + "name": "BM_100xFaster", + "iterations": 1000, + "real_time": 100, + "cpu_time": 100, + "time_unit": "ns" + } + ] +} \ No newline at end of file diff --git a/tools/gbench/__init__.py b/tools/gbench/__init__.py new file mode 100644 index 0000000..fce1a1a --- /dev/null +++ b/tools/gbench/__init__.py @@ -0,0 +1,8 @@ +"""Google Benchmark tooling""" + +__author__ = 'Eric Fiselier' +__email__ = 'eric@efcs.ca' +__versioninfo__ = (0, 5, 0) +__version__ = '.'.join(str(v) for v in __versioninfo__) + 'dev' + +__all__ = [] diff --git a/tools/gbench/report.py b/tools/gbench/report.py new file mode 100644 index 0000000..015d33d --- /dev/null +++ b/tools/gbench/report.py @@ -0,0 +1,146 @@ +"""report.py - Utilities for reporting statistics about benchmark results +""" +import os + +class BenchmarkColor(object): + def __init__(self, name, code): + self.name = name + self.code = code + + def __repr__(self): + return '%s%r' % (self.__class__.__name__, + (self.name, self.code)) + + def __format__(self, format): + return self.code + +# Benchmark Colors Enumeration +BC_NONE = BenchmarkColor('NONE', '') +BC_MAGENTA = BenchmarkColor('MAGENTA', '\033[95m') +BC_CYAN = BenchmarkColor('CYAN', '\033[96m') +BC_OKBLUE = BenchmarkColor('OKBLUE', '\033[94m') +BC_HEADER = BenchmarkColor('HEADER', '\033[92m') +BC_WARNING = BenchmarkColor('WARNING', '\033[93m') +BC_WHITE = BenchmarkColor('WHITE', '\033[97m') +BC_FAIL = BenchmarkColor('FAIL', '\033[91m') +BC_ENDC = BenchmarkColor('ENDC', '\033[0m') +BC_BOLD = BenchmarkColor('BOLD', '\033[1m') +BC_UNDERLINE = BenchmarkColor('UNDERLINE', '\033[4m') + +def color_format(use_color, fmt_str, *args, **kwargs): + """ + Return the result of 'fmt_str.format(*args, **kwargs)' after transforming + 'args' and 'kwargs' according to the value of 'use_color'. If 'use_color' + is False then all color codes in 'args' and 'kwargs' are replaced with + the empty string. + """ + assert use_color is True or use_color is False + if not use_color: + args = [arg if not isinstance(arg, BenchmarkColor) else BC_NONE + for arg in args] + kwargs = {key: arg if not isinstance(arg, BenchmarkColor) else BC_NONE + for key, arg in kwargs.items()} + return fmt_str.format(*args, **kwargs) + + +def find_longest_name(benchmark_list): + """ + Return the length of the longest benchmark name in a given list of + benchmark JSON objects + """ + longest_name = 1 + for bc in benchmark_list: + if len(bc['name']) > longest_name: + longest_name = len(bc['name']) + return longest_name + + +def calculate_change(old_val, new_val): + """ + Return a float representing the decimal change between old_val and new_val. + """ + if old_val == 0 and new_val == 0: + return 0.0 + if old_val == 0: + return float(new_val - old_val) / (float(old_val + new_val) / 2) + return float(new_val - old_val) / abs(old_val) + + +def generate_difference_report(json1, json2, use_color=True): + """ + Calculate and report the difference between each test of two benchmarks + runs specified as 'json1' and 'json2'. + """ + first_col_width = find_longest_name(json1['benchmarks']) + 5 + def find_test(name): + for b in json2['benchmarks']: + if b['name'] == name: + return b + return None + first_line = "{:<{}s} Time CPU Old New".format( + 'Benchmark', first_col_width) + output_strs = [first_line, '-' * len(first_line)] + + gen = (bn for bn in json1['benchmarks'] if 'real_time' in bn and 'cpu_time' in bn) + for bn in gen: + other_bench = find_test(bn['name']) + if not other_bench: + continue + + def get_color(res): + if res > 0.05: + return BC_FAIL + elif res > -0.07: + return BC_WHITE + else: + return BC_CYAN + fmt_str = "{}{:<{}s}{endc}{}{:+9.2f}{endc}{}{:+14.2f}{endc}{:14d}{:14d}" + tres = calculate_change(bn['real_time'], other_bench['real_time']) + cpures = calculate_change(bn['cpu_time'], other_bench['cpu_time']) + output_strs += [color_format(use_color, fmt_str, + BC_HEADER, bn['name'], first_col_width, + get_color(tres), tres, get_color(cpures), cpures, + bn['cpu_time'], other_bench['cpu_time'], + endc=BC_ENDC)] + return output_strs + +############################################################################### +# Unit tests + +import unittest + +class TestReportDifference(unittest.TestCase): + def load_results(self): + import json + testInputs = os.path.join(os.path.dirname(os.path.realpath(__file__)), 'Inputs') + testOutput1 = os.path.join(testInputs, 'test1_run1.json') + testOutput2 = os.path.join(testInputs, 'test1_run2.json') + with open(testOutput1, 'r') as f: + json1 = json.load(f) + with open(testOutput2, 'r') as f: + json2 = json.load(f) + return json1, json2 + + def test_basic(self): + expect_lines = [ + ['BM_SameTimes', '+0.00', '+0.00', '10', '10'], + ['BM_2xFaster', '-0.50', '-0.50', '50', '25'], + ['BM_2xSlower', '+1.00', '+1.00', '50', '100'], + ['BM_10PercentFaster', '-0.10', '-0.10', '100', '90'], + ['BM_10PercentSlower', '+0.10', '+0.10', '100', '110'], + ['BM_100xSlower', '+99.00', '+99.00', '100', '10000'], + ['BM_100xFaster', '-0.99', '-0.99', '10000', '100'], + ] + json1, json2 = self.load_results() + output_lines_with_header = generate_difference_report(json1, json2, use_color=False) + output_lines = output_lines_with_header[2:] + print("\n".join(output_lines_with_header)) + self.assertEqual(len(output_lines), len(expect_lines)) + for i in xrange(0, len(output_lines)): + parts = [x for x in output_lines[i].split(' ') if x] + self.assertEqual(len(parts), 5) + self.assertEqual(parts, expect_lines[i]) + + +if __name__ == '__main__': + unittest.main() diff --git a/tools/gbench/util.py b/tools/gbench/util.py new file mode 100644 index 0000000..07c2377 --- /dev/null +++ b/tools/gbench/util.py @@ -0,0 +1,159 @@ +"""util.py - General utilities for running, loading, and processing benchmarks +""" +import json +import os +import tempfile +import subprocess +import sys + +# Input file type enumeration +IT_Invalid = 0 +IT_JSON = 1 +IT_Executable = 2 + +_num_magic_bytes = 2 if sys.platform.startswith('win') else 4 +def is_executable_file(filename): + """ + Return 'True' if 'filename' names a valid file which is likely + an executable. A file is considered an executable if it starts with the + magic bytes for a EXE, Mach O, or ELF file. + """ + if not os.path.isfile(filename): + return False + with open(filename, mode='rb') as f: + magic_bytes = f.read(_num_magic_bytes) + if sys.platform == 'darwin': + return magic_bytes in [ + b'\xfe\xed\xfa\xce', # MH_MAGIC + b'\xce\xfa\xed\xfe', # MH_CIGAM + b'\xfe\xed\xfa\xcf', # MH_MAGIC_64 + b'\xcf\xfa\xed\xfe', # MH_CIGAM_64 + b'\xca\xfe\xba\xbe', # FAT_MAGIC + b'\xbe\xba\xfe\xca' # FAT_CIGAM + ] + elif sys.platform.startswith('win'): + return magic_bytes == b'MZ' + else: + return magic_bytes == b'\x7FELF' + + +def is_json_file(filename): + """ + Returns 'True' if 'filename' names a valid JSON output file. + 'False' otherwise. + """ + try: + with open(filename, 'r') as f: + json.load(f) + return True + except: + pass + return False + + +def classify_input_file(filename): + """ + Return a tuple (type, msg) where 'type' specifies the classified type + of 'filename'. If 'type' is 'IT_Invalid' then 'msg' is a human readable + string represeting the error. + """ + ftype = IT_Invalid + err_msg = None + if not os.path.exists(filename): + err_msg = "'%s' does not exist" % filename + elif not os.path.isfile(filename): + err_msg = "'%s' does not name a file" % filename + elif is_executable_file(filename): + ftype = IT_Executable + elif is_json_file(filename): + ftype = IT_JSON + else: + err_msg = "'%s' does not name a valid benchmark executable or JSON file" % filename + return ftype, err_msg + + +def check_input_file(filename): + """ + Classify the file named by 'filename' and return the classification. + If the file is classified as 'IT_Invalid' print an error message and exit + the program. + """ + ftype, msg = classify_input_file(filename) + if ftype == IT_Invalid: + print("Invalid input file: %s" % msg) + sys.exit(1) + return ftype + +def find_benchmark_flag(prefix, benchmark_flags): + """ + Search the specified list of flags for a flag matching `` and + if it is found return the arg it specifies. If specified more than once the + last value is returned. If the flag is not found None is returned. + """ + assert prefix.startswith('--') and prefix.endswith('=') + result = None + for f in benchmark_flags: + if f.startswith(prefix): + result = f[len(prefix):] + return result + +def remove_benchmark_flags(prefix, benchmark_flags): + """ + Return a new list containing the specified benchmark_flags except those + with the specified prefix. + """ + assert prefix.startswith('--') and prefix.endswith('=') + return [f for f in benchmark_flags if not f.startswith(prefix)] + +def load_benchmark_results(fname): + """ + Read benchmark output from a file and return the JSON object. + REQUIRES: 'fname' names a file containing JSON benchmark output. + """ + with open(fname, 'r') as f: + return json.load(f) + + +def run_benchmark(exe_name, benchmark_flags): + """ + Run a benchmark specified by 'exe_name' with the specified + 'benchmark_flags'. The benchmark is run directly as a subprocess to preserve + real time console output. + RETURNS: A JSON object representing the benchmark output + """ + output_name = find_benchmark_flag('--benchmark_out=', + benchmark_flags) + is_temp_output = False + if output_name is None: + is_temp_output = True + thandle, output_name = tempfile.mkstemp() + os.close(thandle) + benchmark_flags = list(benchmark_flags) + \ + ['--benchmark_out=%s' % output_name] + + cmd = [exe_name] + benchmark_flags + print("RUNNING: %s" % ' '.join(cmd)) + exitCode = subprocess.call(cmd) + if exitCode != 0: + print('TEST FAILED...') + sys.exit(exitCode) + json_res = load_benchmark_results(output_name) + if is_temp_output: + os.unlink(output_name) + return json_res + + +def run_or_load_benchmark(filename, benchmark_flags): + """ + Get the results for a specified benchmark. If 'filename' specifies + an executable benchmark then the results are generated by running the + benchmark. Otherwise 'filename' must name a valid JSON output file, + which is loaded and the result returned. + """ + ftype = check_input_file(filename) + if ftype == IT_JSON: + return load_benchmark_results(filename) + elif ftype == IT_Executable: + return run_benchmark(filename, benchmark_flags) + else: + assert False # This branch is unreachable \ No newline at end of file From 8de46c0bd5b46213021fcb573da57b3ac17f6541 Mon Sep 17 00:00:00 2001 From: Valient Gough Date: Sun, 6 Aug 2017 22:36:28 -0400 Subject: [PATCH 09/19] Squashed 'vendor/github.com/google/googletest/' content from commit a3ac2d7f git-subtree-dir: vendor/github.com/google/googletest git-subtree-split: a3ac2d7faa9cc6d38d69321f293925f72edf6727 --- .gitignore | 2 + .travis.yml | 46 + CMakeLists.txt | 16 + README.md | 142 + appveyor.yml | 71 + googlemock/CHANGES | 126 + googlemock/CMakeLists.txt | 202 + googlemock/CONTRIBUTORS | 40 + googlemock/LICENSE | 28 + googlemock/Makefile.am | 224 + googlemock/README.md | 333 + googlemock/build-aux/.keep | 0 googlemock/configure.ac | 146 + googlemock/docs/CheatSheet.md | 562 ++ googlemock/docs/CookBook.md | 3675 ++++++++ googlemock/docs/DesignDoc.md | 280 + googlemock/docs/DevGuide.md | 132 + googlemock/docs/Documentation.md | 12 + googlemock/docs/ForDummies.md | 439 + googlemock/docs/FrequentlyAskedQuestions.md | 628 ++ googlemock/docs/KnownIssues.md | 19 + googlemock/docs/v1_5/CheatSheet.md | 525 ++ googlemock/docs/v1_5/CookBook.md | 3250 +++++++ googlemock/docs/v1_5/Documentation.md | 11 + googlemock/docs/v1_5/ForDummies.md | 439 + .../docs/v1_5/FrequentlyAskedQuestions.md | 624 ++ googlemock/docs/v1_6/CheatSheet.md | 534 ++ googlemock/docs/v1_6/CookBook.md | 3342 +++++++ googlemock/docs/v1_6/Documentation.md | 12 + googlemock/docs/v1_6/ForDummies.md | 439 + .../docs/v1_6/FrequentlyAskedQuestions.md | 628 ++ googlemock/docs/v1_7/CheatSheet.md | 556 ++ googlemock/docs/v1_7/CookBook.md | 3432 ++++++++ googlemock/docs/v1_7/Documentation.md | 12 + googlemock/docs/v1_7/ForDummies.md | 439 + .../docs/v1_7/FrequentlyAskedQuestions.md | 628 ++ googlemock/include/gmock/gmock-actions.h | 1205 +++ .../include/gmock/gmock-cardinalities.h | 147 + .../include/gmock/gmock-generated-actions.h | 2377 +++++ .../gmock/gmock-generated-actions.h.pump | 794 ++ .../gmock/gmock-generated-function-mockers.h | 1095 +++ .../gmock-generated-function-mockers.h.pump | 291 + .../include/gmock/gmock-generated-matchers.h | 2179 +++++ .../gmock/gmock-generated-matchers.h.pump | 672 ++ .../gmock/gmock-generated-nice-strict.h | 397 + .../gmock/gmock-generated-nice-strict.h.pump | 161 + googlemock/include/gmock/gmock-matchers.h | 4399 ++++++++++ googlemock/include/gmock/gmock-more-actions.h | 246 + .../include/gmock/gmock-more-matchers.h | 58 + .../include/gmock/gmock-spec-builders.h | 1847 ++++ googlemock/include/gmock/gmock.h | 94 + .../internal/custom/gmock-generated-actions.h | 8 + .../custom/gmock-generated-actions.h.pump | 10 + .../gmock/internal/custom/gmock-matchers.h | 39 + .../gmock/internal/custom/gmock-port.h | 46 + .../internal/gmock-generated-internal-utils.h | 279 + .../gmock-generated-internal-utils.h.pump | 136 + .../gmock/internal/gmock-internal-utils.h | 511 ++ .../include/gmock/internal/gmock-port.h | 91 + googlemock/make/Makefile | 101 + googlemock/msvc/2005/gmock.sln | 32 + googlemock/msvc/2005/gmock.vcproj | 191 + googlemock/msvc/2005/gmock_config.vsprops | 15 + googlemock/msvc/2005/gmock_main.vcproj | 187 + googlemock/msvc/2005/gmock_test.vcproj | 201 + googlemock/msvc/2010/gmock.sln | 32 + googlemock/msvc/2010/gmock.vcxproj | 82 + googlemock/msvc/2010/gmock_config.props | 19 + googlemock/msvc/2010/gmock_main.vcxproj | 88 + googlemock/msvc/2010/gmock_test.vcxproj | 101 + googlemock/msvc/2015/gmock.sln | 32 + googlemock/msvc/2015/gmock.vcxproj | 84 + googlemock/msvc/2015/gmock_config.props | 19 + googlemock/msvc/2015/gmock_main.vcxproj | 90 + googlemock/msvc/2015/gmock_test.vcxproj | 103 + googlemock/scripts/fuse_gmock_files.py | 240 + googlemock/scripts/generator/LICENSE | 203 + googlemock/scripts/generator/README | 35 + googlemock/scripts/generator/README.cppclean | 115 + googlemock/scripts/generator/cpp/__init__.py | 0 googlemock/scripts/generator/cpp/ast.py | 1733 ++++ .../scripts/generator/cpp/gmock_class.py | 227 + .../scripts/generator/cpp/gmock_class_test.py | 448 + googlemock/scripts/generator/cpp/keywords.py | 59 + googlemock/scripts/generator/cpp/tokenize.py | 287 + googlemock/scripts/generator/cpp/utils.py | 41 + googlemock/scripts/generator/gmock_gen.py | 31 + googlemock/scripts/gmock-config.in | 303 + googlemock/scripts/gmock_doctor.py | 640 ++ googlemock/scripts/upload.py | 1387 +++ googlemock/scripts/upload_gmock.py | 78 + googlemock/src/gmock-all.cc | 47 + googlemock/src/gmock-cardinalities.cc | 156 + googlemock/src/gmock-internal-utils.cc | 174 + googlemock/src/gmock-matchers.cc | 498 ++ googlemock/src/gmock-spec-builders.cc | 823 ++ googlemock/src/gmock.cc | 183 + googlemock/src/gmock_main.cc | 54 + googlemock/test/gmock-actions_test.cc | 1411 +++ googlemock/test/gmock-cardinalities_test.cc | 428 + .../test/gmock-generated-actions_test.cc | 1228 +++ .../gmock-generated-function-mockers_test.cc | 622 ++ .../gmock-generated-internal-utils_test.cc | 127 + .../test/gmock-generated-matchers_test.cc | 1286 +++ googlemock/test/gmock-internal-utils_test.cc | 699 ++ googlemock/test/gmock-matchers_test.cc | 5652 ++++++++++++ googlemock/test/gmock-more-actions_test.cc | 708 ++ googlemock/test/gmock-nice-strict_test.cc | 424 + googlemock/test/gmock-port_test.cc | 43 + googlemock/test/gmock-spec-builders_test.cc | 2644 ++++++ googlemock/test/gmock_all_test.cc | 51 + googlemock/test/gmock_ex_test.cc | 81 + googlemock/test/gmock_leak_test.py | 108 + googlemock/test/gmock_leak_test_.cc | 100 + googlemock/test/gmock_link2_test.cc | 40 + googlemock/test/gmock_link_test.cc | 40 + googlemock/test/gmock_link_test.h | 669 ++ googlemock/test/gmock_output_test.py | 180 + googlemock/test/gmock_output_test_.cc | 291 + googlemock/test/gmock_output_test_golden.txt | 310 + googlemock/test/gmock_stress_test.cc | 322 + googlemock/test/gmock_test.cc | 220 + googlemock/test/gmock_test_utils.py | 112 + googletest/.gitignore | 2 + googletest/CHANGES | 157 + googletest/CMakeLists.txt | 286 + googletest/CONTRIBUTORS | 37 + googletest/LICENSE | 28 + googletest/Makefile.am | 310 + googletest/README.md | 280 + googletest/build-aux/.keep | 0 googletest/cmake/internal_utils.cmake | 254 + googletest/codegear/gtest.cbproj | 138 + googletest/codegear/gtest.groupproj | 54 + googletest/codegear/gtest_all.cc | 38 + googletest/codegear/gtest_link.cc | 40 + googletest/codegear/gtest_main.cbproj | 82 + googletest/codegear/gtest_unittest.cbproj | 88 + googletest/configure.ac | 68 + googletest/docs/AdvancedGuide.md | 2182 +++++ googletest/docs/DevGuide.md | 126 + googletest/docs/Documentation.md | 14 + googletest/docs/FAQ.md | 1087 +++ googletest/docs/Primer.md | 502 ++ googletest/docs/PumpManual.md | 177 + googletest/docs/Samples.md | 14 + googletest/docs/V1_5_AdvancedGuide.md | 2096 +++++ googletest/docs/V1_5_Documentation.md | 12 + googletest/docs/V1_5_FAQ.md | 886 ++ googletest/docs/V1_5_Primer.md | 497 ++ googletest/docs/V1_5_PumpManual.md | 177 + googletest/docs/V1_5_XcodeGuide.md | 93 + googletest/docs/V1_6_AdvancedGuide.md | 2178 +++++ googletest/docs/V1_6_Documentation.md | 14 + googletest/docs/V1_6_FAQ.md | 1038 +++ googletest/docs/V1_6_Primer.md | 501 ++ googletest/docs/V1_6_PumpManual.md | 177 + googletest/docs/V1_6_Samples.md | 14 + googletest/docs/V1_6_XcodeGuide.md | 93 + googletest/docs/V1_7_AdvancedGuide.md | 2181 +++++ googletest/docs/V1_7_Documentation.md | 14 + googletest/docs/V1_7_FAQ.md | 1082 +++ googletest/docs/V1_7_Primer.md | 501 ++ googletest/docs/V1_7_PumpManual.md | 177 + googletest/docs/V1_7_Samples.md | 14 + googletest/docs/V1_7_XcodeGuide.md | 93 + googletest/docs/XcodeGuide.md | 93 + googletest/include/gtest/gtest-death-test.h | 294 + googletest/include/gtest/gtest-message.h | 250 + googletest/include/gtest/gtest-param-test.h | 1444 +++ .../include/gtest/gtest-param-test.h.pump | 510 ++ googletest/include/gtest/gtest-printers.h | 993 +++ googletest/include/gtest/gtest-spi.h | 232 + googletest/include/gtest/gtest-test-part.h | 179 + googletest/include/gtest/gtest-typed-test.h | 263 + googletest/include/gtest/gtest.h | 2236 +++++ googletest/include/gtest/gtest_pred_impl.h | 358 + googletest/include/gtest/gtest_prod.h | 58 + .../gtest/internal/custom/gtest-port.h | 69 + .../gtest/internal/custom/gtest-printers.h | 42 + .../include/gtest/internal/custom/gtest.h | 41 + .../internal/gtest-death-test-internal.h | 319 + .../include/gtest/internal/gtest-filepath.h | 206 + .../include/gtest/internal/gtest-internal.h | 1238 +++ .../include/gtest/internal/gtest-linked_ptr.h | 243 + .../internal/gtest-param-util-generated.h | 5146 +++++++++++ .../gtest-param-util-generated.h.pump | 286 + .../include/gtest/internal/gtest-param-util.h | 731 ++ .../include/gtest/internal/gtest-port-arch.h | 93 + .../include/gtest/internal/gtest-port.h | 2554 ++++++ .../include/gtest/internal/gtest-string.h | 167 + .../include/gtest/internal/gtest-tuple.h | 1020 +++ .../include/gtest/internal/gtest-tuple.h.pump | 347 + .../include/gtest/internal/gtest-type-util.h | 3331 +++++++ .../gtest/internal/gtest-type-util.h.pump | 297 + googletest/m4/acx_pthread.m4 | 363 + googletest/m4/gtest.m4 | 74 + googletest/make/Makefile | 82 + googletest/msvc/gtest-md.sln | 45 + googletest/msvc/gtest-md.vcproj | 126 + googletest/msvc/gtest.sln | 45 + googletest/msvc/gtest.vcproj | 126 + googletest/msvc/gtest_main-md.vcproj | 129 + googletest/msvc/gtest_main.vcproj | 129 + googletest/msvc/gtest_prod_test-md.vcproj | 164 + googletest/msvc/gtest_prod_test.vcproj | 164 + googletest/msvc/gtest_unittest-md.vcproj | 147 + googletest/msvc/gtest_unittest.vcproj | 147 + googletest/samples/prime_tables.h | 123 + googletest/samples/sample1.cc | 68 + googletest/samples/sample1.h | 43 + googletest/samples/sample10_unittest.cc | 144 + googletest/samples/sample1_unittest.cc | 153 + googletest/samples/sample2.cc | 56 + googletest/samples/sample2.h | 85 + googletest/samples/sample2_unittest.cc | 109 + googletest/samples/sample3-inl.h | 172 + googletest/samples/sample3_unittest.cc | 151 + googletest/samples/sample4.cc | 46 + googletest/samples/sample4.h | 53 + googletest/samples/sample4_unittest.cc | 45 + googletest/samples/sample5_unittest.cc | 199 + googletest/samples/sample6_unittest.cc | 224 + googletest/samples/sample7_unittest.cc | 130 + googletest/samples/sample8_unittest.cc | 173 + googletest/samples/sample9_unittest.cc | 160 + googletest/scripts/common.py | 83 + googletest/scripts/fuse_gtest_files.py | 253 + googletest/scripts/gen_gtest_pred_impl.py | 730 ++ googletest/scripts/gtest-config.in | 274 + googletest/scripts/pump.py | 855 ++ googletest/scripts/release_docs.py | 158 + googletest/scripts/test/Makefile | 59 + googletest/scripts/upload.py | 1387 +++ googletest/scripts/upload_gtest.py | 78 + googletest/src/gtest-all.cc | 48 + googletest/src/gtest-death-test.cc | 1342 +++ googletest/src/gtest-filepath.cc | 387 + googletest/src/gtest-internal-inl.h | 1183 +++ googletest/src/gtest-port.cc | 1259 +++ googletest/src/gtest-printers.cc | 373 + googletest/src/gtest-test-part.cc | 110 + googletest/src/gtest-typed-test.cc | 118 + googletest/src/gtest.cc | 5388 ++++++++++++ googletest/src/gtest_main.cc | 38 + googletest/test/gtest-death-test_ex_test.cc | 93 + googletest/test/gtest-death-test_test.cc | 1427 +++ googletest/test/gtest-filepath_test.cc | 662 ++ googletest/test/gtest-linked_ptr_test.cc | 154 + googletest/test/gtest-listener_test.cc | 311 + googletest/test/gtest-message_test.cc | 159 + googletest/test/gtest-options_test.cc | 215 + googletest/test/gtest-param-test2_test.cc | 65 + googletest/test/gtest-param-test_test.cc | 1055 +++ googletest/test/gtest-param-test_test.h | 57 + googletest/test/gtest-port_test.cc | 1304 +++ googletest/test/gtest-printers_test.cc | 1635 ++++ googletest/test/gtest-test-part_test.cc | 208 + googletest/test/gtest-tuple_test.cc | 320 + googletest/test/gtest-typed-test2_test.cc | 45 + googletest/test/gtest-typed-test_test.cc | 380 + googletest/test/gtest-typed-test_test.h | 66 + googletest/test/gtest-unittest-api_test.cc | 341 + googletest/test/gtest_all_test.cc | 47 + .../test/gtest_break_on_failure_unittest.py | 212 + .../test/gtest_break_on_failure_unittest_.cc | 88 + .../test/gtest_catch_exceptions_test.py | 237 + .../test/gtest_catch_exceptions_test_.cc | 311 + googletest/test/gtest_color_test.py | 130 + googletest/test/gtest_color_test_.cc | 71 + googletest/test/gtest_env_var_test.py | 117 + googletest/test/gtest_env_var_test_.cc | 126 + googletest/test/gtest_environment_test.cc | 192 + googletest/test/gtest_filter_unittest.py | 636 ++ googletest/test/gtest_filter_unittest_.cc | 140 + googletest/test/gtest_help_test.py | 172 + googletest/test/gtest_help_test_.cc | 46 + googletest/test/gtest_list_tests_unittest.py | 207 + googletest/test/gtest_list_tests_unittest_.cc | 157 + googletest/test/gtest_main_unittest.cc | 45 + googletest/test/gtest_no_test_unittest.cc | 56 + googletest/test/gtest_output_test.py | 340 + googletest/test/gtest_output_test_.cc | 1062 +++ .../test/gtest_output_test_golden_lin.txt | 743 ++ googletest/test/gtest_pred_impl_unittest.cc | 2427 ++++++ googletest/test/gtest_premature_exit_test.cc | 127 + googletest/test/gtest_prod_test.cc | 57 + googletest/test/gtest_repeat_test.cc | 253 + googletest/test/gtest_shuffle_test.py | 325 + googletest/test/gtest_shuffle_test_.cc | 103 + googletest/test/gtest_sole_header_test.cc | 57 + googletest/test/gtest_stress_test.cc | 256 + googletest/test/gtest_test_utils.py | 320 + .../test/gtest_throw_on_failure_ex_test.cc | 92 + .../test/gtest_throw_on_failure_test.py | 171 + .../test/gtest_throw_on_failure_test_.cc | 72 + googletest/test/gtest_uninitialized_test.py | 70 + googletest/test/gtest_uninitialized_test_.cc | 43 + googletest/test/gtest_unittest.cc | 7706 +++++++++++++++++ googletest/test/gtest_xml_outfile1_test_.cc | 49 + googletest/test/gtest_xml_outfile2_test_.cc | 49 + googletest/test/gtest_xml_outfiles_test.py | 132 + googletest/test/gtest_xml_output_unittest.py | 308 + googletest/test/gtest_xml_output_unittest_.cc | 181 + googletest/test/gtest_xml_test_utils.py | 194 + googletest/test/production.cc | 36 + googletest/test/production.h | 55 + googletest/xcode/Config/DebugProject.xcconfig | 30 + .../xcode/Config/FrameworkTarget.xcconfig | 17 + googletest/xcode/Config/General.xcconfig | 41 + .../xcode/Config/ReleaseProject.xcconfig | 32 + .../xcode/Config/StaticLibraryTarget.xcconfig | 18 + googletest/xcode/Config/TestTarget.xcconfig | 8 + googletest/xcode/Resources/Info.plist | 30 + .../xcode/Samples/FrameworkSample/Info.plist | 28 + .../WidgetFramework.xcodeproj/project.pbxproj | 457 + .../xcode/Samples/FrameworkSample/runtests.sh | 62 + .../xcode/Samples/FrameworkSample/widget.cc | 63 + .../xcode/Samples/FrameworkSample/widget.h | 59 + .../Samples/FrameworkSample/widget_test.cc | 68 + googletest/xcode/Scripts/runtests.sh | 65 + googletest/xcode/Scripts/versiongenerate.py | 100 + .../xcode/gtest.xcodeproj/project.pbxproj | 1135 +++ travis.sh | 15 + 324 files changed, 153794 insertions(+) create mode 100644 .gitignore create mode 100644 .travis.yml create mode 100644 CMakeLists.txt create mode 100644 README.md create mode 100644 appveyor.yml create mode 100644 googlemock/CHANGES create mode 100644 googlemock/CMakeLists.txt create mode 100644 googlemock/CONTRIBUTORS create mode 100644 googlemock/LICENSE create mode 100644 googlemock/Makefile.am create mode 100644 googlemock/README.md create mode 100644 googlemock/build-aux/.keep create mode 100644 googlemock/configure.ac create mode 100644 googlemock/docs/CheatSheet.md create mode 100644 googlemock/docs/CookBook.md create mode 100644 googlemock/docs/DesignDoc.md create mode 100644 googlemock/docs/DevGuide.md create mode 100644 googlemock/docs/Documentation.md create mode 100644 googlemock/docs/ForDummies.md create mode 100644 googlemock/docs/FrequentlyAskedQuestions.md create mode 100644 googlemock/docs/KnownIssues.md create mode 100644 googlemock/docs/v1_5/CheatSheet.md create mode 100644 googlemock/docs/v1_5/CookBook.md create mode 100644 googlemock/docs/v1_5/Documentation.md create mode 100644 googlemock/docs/v1_5/ForDummies.md create mode 100644 googlemock/docs/v1_5/FrequentlyAskedQuestions.md create mode 100644 googlemock/docs/v1_6/CheatSheet.md create mode 100644 googlemock/docs/v1_6/CookBook.md create mode 100644 googlemock/docs/v1_6/Documentation.md create mode 100644 googlemock/docs/v1_6/ForDummies.md create mode 100644 googlemock/docs/v1_6/FrequentlyAskedQuestions.md create mode 100644 googlemock/docs/v1_7/CheatSheet.md create mode 100644 googlemock/docs/v1_7/CookBook.md create mode 100644 googlemock/docs/v1_7/Documentation.md create mode 100644 googlemock/docs/v1_7/ForDummies.md create mode 100644 googlemock/docs/v1_7/FrequentlyAskedQuestions.md create mode 100644 googlemock/include/gmock/gmock-actions.h create mode 100644 googlemock/include/gmock/gmock-cardinalities.h create mode 100644 googlemock/include/gmock/gmock-generated-actions.h create mode 100644 googlemock/include/gmock/gmock-generated-actions.h.pump create mode 100644 googlemock/include/gmock/gmock-generated-function-mockers.h create mode 100644 googlemock/include/gmock/gmock-generated-function-mockers.h.pump create mode 100644 googlemock/include/gmock/gmock-generated-matchers.h create mode 100644 googlemock/include/gmock/gmock-generated-matchers.h.pump create mode 100644 googlemock/include/gmock/gmock-generated-nice-strict.h create mode 100644 googlemock/include/gmock/gmock-generated-nice-strict.h.pump create mode 100644 googlemock/include/gmock/gmock-matchers.h create mode 100644 googlemock/include/gmock/gmock-more-actions.h create mode 100644 googlemock/include/gmock/gmock-more-matchers.h create mode 100644 googlemock/include/gmock/gmock-spec-builders.h create mode 100644 googlemock/include/gmock/gmock.h create mode 100644 googlemock/include/gmock/internal/custom/gmock-generated-actions.h create mode 100644 googlemock/include/gmock/internal/custom/gmock-generated-actions.h.pump create mode 100644 googlemock/include/gmock/internal/custom/gmock-matchers.h create mode 100644 googlemock/include/gmock/internal/custom/gmock-port.h create mode 100644 googlemock/include/gmock/internal/gmock-generated-internal-utils.h create mode 100644 googlemock/include/gmock/internal/gmock-generated-internal-utils.h.pump create mode 100644 googlemock/include/gmock/internal/gmock-internal-utils.h create mode 100644 googlemock/include/gmock/internal/gmock-port.h create mode 100644 googlemock/make/Makefile create mode 100644 googlemock/msvc/2005/gmock.sln create mode 100644 googlemock/msvc/2005/gmock.vcproj create mode 100644 googlemock/msvc/2005/gmock_config.vsprops create mode 100644 googlemock/msvc/2005/gmock_main.vcproj create mode 100644 googlemock/msvc/2005/gmock_test.vcproj create mode 100644 googlemock/msvc/2010/gmock.sln create mode 100644 googlemock/msvc/2010/gmock.vcxproj create mode 100644 googlemock/msvc/2010/gmock_config.props create mode 100644 googlemock/msvc/2010/gmock_main.vcxproj create mode 100644 googlemock/msvc/2010/gmock_test.vcxproj create mode 100644 googlemock/msvc/2015/gmock.sln create mode 100644 googlemock/msvc/2015/gmock.vcxproj create mode 100644 googlemock/msvc/2015/gmock_config.props create mode 100644 googlemock/msvc/2015/gmock_main.vcxproj create mode 100644 googlemock/msvc/2015/gmock_test.vcxproj create mode 100755 googlemock/scripts/fuse_gmock_files.py create mode 100644 googlemock/scripts/generator/LICENSE create mode 100644 googlemock/scripts/generator/README create mode 100644 googlemock/scripts/generator/README.cppclean create mode 100755 googlemock/scripts/generator/cpp/__init__.py create mode 100755 googlemock/scripts/generator/cpp/ast.py create mode 100755 googlemock/scripts/generator/cpp/gmock_class.py create mode 100755 googlemock/scripts/generator/cpp/gmock_class_test.py create mode 100755 googlemock/scripts/generator/cpp/keywords.py create mode 100755 googlemock/scripts/generator/cpp/tokenize.py create mode 100755 googlemock/scripts/generator/cpp/utils.py create mode 100755 googlemock/scripts/generator/gmock_gen.py create mode 100755 googlemock/scripts/gmock-config.in create mode 100755 googlemock/scripts/gmock_doctor.py create mode 100755 googlemock/scripts/upload.py create mode 100755 googlemock/scripts/upload_gmock.py create mode 100644 googlemock/src/gmock-all.cc create mode 100644 googlemock/src/gmock-cardinalities.cc create mode 100644 googlemock/src/gmock-internal-utils.cc create mode 100644 googlemock/src/gmock-matchers.cc create mode 100644 googlemock/src/gmock-spec-builders.cc create mode 100644 googlemock/src/gmock.cc create mode 100644 googlemock/src/gmock_main.cc create mode 100644 googlemock/test/gmock-actions_test.cc create mode 100644 googlemock/test/gmock-cardinalities_test.cc create mode 100644 googlemock/test/gmock-generated-actions_test.cc create mode 100644 googlemock/test/gmock-generated-function-mockers_test.cc create mode 100644 googlemock/test/gmock-generated-internal-utils_test.cc create mode 100644 googlemock/test/gmock-generated-matchers_test.cc create mode 100644 googlemock/test/gmock-internal-utils_test.cc create mode 100644 googlemock/test/gmock-matchers_test.cc create mode 100644 googlemock/test/gmock-more-actions_test.cc create mode 100644 googlemock/test/gmock-nice-strict_test.cc create mode 100644 googlemock/test/gmock-port_test.cc create mode 100644 googlemock/test/gmock-spec-builders_test.cc create mode 100644 googlemock/test/gmock_all_test.cc create mode 100644 googlemock/test/gmock_ex_test.cc create mode 100755 googlemock/test/gmock_leak_test.py create mode 100644 googlemock/test/gmock_leak_test_.cc create mode 100644 googlemock/test/gmock_link2_test.cc create mode 100644 googlemock/test/gmock_link_test.cc create mode 100644 googlemock/test/gmock_link_test.h create mode 100755 googlemock/test/gmock_output_test.py create mode 100644 googlemock/test/gmock_output_test_.cc create mode 100644 googlemock/test/gmock_output_test_golden.txt create mode 100644 googlemock/test/gmock_stress_test.cc create mode 100644 googlemock/test/gmock_test.cc create mode 100755 googlemock/test/gmock_test_utils.py create mode 100644 googletest/.gitignore create mode 100644 googletest/CHANGES create mode 100644 googletest/CMakeLists.txt create mode 100644 googletest/CONTRIBUTORS create mode 100644 googletest/LICENSE create mode 100644 googletest/Makefile.am create mode 100644 googletest/README.md create mode 100644 googletest/build-aux/.keep create mode 100644 googletest/cmake/internal_utils.cmake create mode 100644 googletest/codegear/gtest.cbproj create mode 100644 googletest/codegear/gtest.groupproj create mode 100644 googletest/codegear/gtest_all.cc create mode 100644 googletest/codegear/gtest_link.cc create mode 100644 googletest/codegear/gtest_main.cbproj create mode 100644 googletest/codegear/gtest_unittest.cbproj create mode 100644 googletest/configure.ac create mode 100644 googletest/docs/AdvancedGuide.md create mode 100644 googletest/docs/DevGuide.md create mode 100644 googletest/docs/Documentation.md create mode 100644 googletest/docs/FAQ.md create mode 100644 googletest/docs/Primer.md create mode 100644 googletest/docs/PumpManual.md create mode 100644 googletest/docs/Samples.md create mode 100644 googletest/docs/V1_5_AdvancedGuide.md create mode 100644 googletest/docs/V1_5_Documentation.md create mode 100644 googletest/docs/V1_5_FAQ.md create mode 100644 googletest/docs/V1_5_Primer.md create mode 100644 googletest/docs/V1_5_PumpManual.md create mode 100644 googletest/docs/V1_5_XcodeGuide.md create mode 100644 googletest/docs/V1_6_AdvancedGuide.md create mode 100644 googletest/docs/V1_6_Documentation.md create mode 100644 googletest/docs/V1_6_FAQ.md create mode 100644 googletest/docs/V1_6_Primer.md create mode 100644 googletest/docs/V1_6_PumpManual.md create mode 100644 googletest/docs/V1_6_Samples.md create mode 100644 googletest/docs/V1_6_XcodeGuide.md create mode 100644 googletest/docs/V1_7_AdvancedGuide.md create mode 100644 googletest/docs/V1_7_Documentation.md create mode 100644 googletest/docs/V1_7_FAQ.md create mode 100644 googletest/docs/V1_7_Primer.md create mode 100644 googletest/docs/V1_7_PumpManual.md create mode 100644 googletest/docs/V1_7_Samples.md create mode 100644 googletest/docs/V1_7_XcodeGuide.md create mode 100644 googletest/docs/XcodeGuide.md create mode 100644 googletest/include/gtest/gtest-death-test.h create mode 100644 googletest/include/gtest/gtest-message.h create mode 100644 googletest/include/gtest/gtest-param-test.h create mode 100644 googletest/include/gtest/gtest-param-test.h.pump create mode 100644 googletest/include/gtest/gtest-printers.h create mode 100644 googletest/include/gtest/gtest-spi.h create mode 100644 googletest/include/gtest/gtest-test-part.h create mode 100644 googletest/include/gtest/gtest-typed-test.h create mode 100644 googletest/include/gtest/gtest.h create mode 100644 googletest/include/gtest/gtest_pred_impl.h create mode 100644 googletest/include/gtest/gtest_prod.h create mode 100644 googletest/include/gtest/internal/custom/gtest-port.h create mode 100644 googletest/include/gtest/internal/custom/gtest-printers.h create mode 100644 googletest/include/gtest/internal/custom/gtest.h create mode 100644 googletest/include/gtest/internal/gtest-death-test-internal.h create mode 100644 googletest/include/gtest/internal/gtest-filepath.h create mode 100644 googletest/include/gtest/internal/gtest-internal.h create mode 100644 googletest/include/gtest/internal/gtest-linked_ptr.h create mode 100644 googletest/include/gtest/internal/gtest-param-util-generated.h create mode 100644 googletest/include/gtest/internal/gtest-param-util-generated.h.pump create mode 100644 googletest/include/gtest/internal/gtest-param-util.h create mode 100644 googletest/include/gtest/internal/gtest-port-arch.h create mode 100644 googletest/include/gtest/internal/gtest-port.h create mode 100644 googletest/include/gtest/internal/gtest-string.h create mode 100644 googletest/include/gtest/internal/gtest-tuple.h create mode 100644 googletest/include/gtest/internal/gtest-tuple.h.pump create mode 100644 googletest/include/gtest/internal/gtest-type-util.h create mode 100644 googletest/include/gtest/internal/gtest-type-util.h.pump create mode 100644 googletest/m4/acx_pthread.m4 create mode 100644 googletest/m4/gtest.m4 create mode 100644 googletest/make/Makefile create mode 100644 googletest/msvc/gtest-md.sln create mode 100644 googletest/msvc/gtest-md.vcproj create mode 100644 googletest/msvc/gtest.sln create mode 100644 googletest/msvc/gtest.vcproj create mode 100644 googletest/msvc/gtest_main-md.vcproj create mode 100644 googletest/msvc/gtest_main.vcproj create mode 100644 googletest/msvc/gtest_prod_test-md.vcproj create mode 100644 googletest/msvc/gtest_prod_test.vcproj create mode 100644 googletest/msvc/gtest_unittest-md.vcproj create mode 100644 googletest/msvc/gtest_unittest.vcproj create mode 100644 googletest/samples/prime_tables.h create mode 100644 googletest/samples/sample1.cc create mode 100644 googletest/samples/sample1.h create mode 100644 googletest/samples/sample10_unittest.cc create mode 100644 googletest/samples/sample1_unittest.cc create mode 100644 googletest/samples/sample2.cc create mode 100644 googletest/samples/sample2.h create mode 100644 googletest/samples/sample2_unittest.cc create mode 100644 googletest/samples/sample3-inl.h create mode 100644 googletest/samples/sample3_unittest.cc create mode 100644 googletest/samples/sample4.cc create mode 100644 googletest/samples/sample4.h create mode 100644 googletest/samples/sample4_unittest.cc create mode 100644 googletest/samples/sample5_unittest.cc create mode 100644 googletest/samples/sample6_unittest.cc create mode 100644 googletest/samples/sample7_unittest.cc create mode 100644 googletest/samples/sample8_unittest.cc create mode 100644 googletest/samples/sample9_unittest.cc create mode 100644 googletest/scripts/common.py create mode 100755 googletest/scripts/fuse_gtest_files.py create mode 100755 googletest/scripts/gen_gtest_pred_impl.py create mode 100755 googletest/scripts/gtest-config.in create mode 100755 googletest/scripts/pump.py create mode 100755 googletest/scripts/release_docs.py create mode 100644 googletest/scripts/test/Makefile create mode 100755 googletest/scripts/upload.py create mode 100755 googletest/scripts/upload_gtest.py create mode 100644 googletest/src/gtest-all.cc create mode 100644 googletest/src/gtest-death-test.cc create mode 100644 googletest/src/gtest-filepath.cc create mode 100644 googletest/src/gtest-internal-inl.h create mode 100644 googletest/src/gtest-port.cc create mode 100644 googletest/src/gtest-printers.cc create mode 100644 googletest/src/gtest-test-part.cc create mode 100644 googletest/src/gtest-typed-test.cc create mode 100644 googletest/src/gtest.cc create mode 100644 googletest/src/gtest_main.cc create mode 100644 googletest/test/gtest-death-test_ex_test.cc create mode 100644 googletest/test/gtest-death-test_test.cc create mode 100644 googletest/test/gtest-filepath_test.cc create mode 100644 googletest/test/gtest-linked_ptr_test.cc create mode 100644 googletest/test/gtest-listener_test.cc create mode 100644 googletest/test/gtest-message_test.cc create mode 100644 googletest/test/gtest-options_test.cc create mode 100644 googletest/test/gtest-param-test2_test.cc create mode 100644 googletest/test/gtest-param-test_test.cc create mode 100644 googletest/test/gtest-param-test_test.h create mode 100644 googletest/test/gtest-port_test.cc create mode 100644 googletest/test/gtest-printers_test.cc create mode 100644 googletest/test/gtest-test-part_test.cc create mode 100644 googletest/test/gtest-tuple_test.cc create mode 100644 googletest/test/gtest-typed-test2_test.cc create mode 100644 googletest/test/gtest-typed-test_test.cc create mode 100644 googletest/test/gtest-typed-test_test.h create mode 100644 googletest/test/gtest-unittest-api_test.cc create mode 100644 googletest/test/gtest_all_test.cc create mode 100755 googletest/test/gtest_break_on_failure_unittest.py create mode 100644 googletest/test/gtest_break_on_failure_unittest_.cc create mode 100755 googletest/test/gtest_catch_exceptions_test.py create mode 100644 googletest/test/gtest_catch_exceptions_test_.cc create mode 100755 googletest/test/gtest_color_test.py create mode 100644 googletest/test/gtest_color_test_.cc create mode 100755 googletest/test/gtest_env_var_test.py create mode 100644 googletest/test/gtest_env_var_test_.cc create mode 100644 googletest/test/gtest_environment_test.cc create mode 100755 googletest/test/gtest_filter_unittest.py create mode 100644 googletest/test/gtest_filter_unittest_.cc create mode 100755 googletest/test/gtest_help_test.py create mode 100644 googletest/test/gtest_help_test_.cc create mode 100755 googletest/test/gtest_list_tests_unittest.py create mode 100644 googletest/test/gtest_list_tests_unittest_.cc create mode 100644 googletest/test/gtest_main_unittest.cc create mode 100644 googletest/test/gtest_no_test_unittest.cc create mode 100755 googletest/test/gtest_output_test.py create mode 100644 googletest/test/gtest_output_test_.cc create mode 100644 googletest/test/gtest_output_test_golden_lin.txt create mode 100644 googletest/test/gtest_pred_impl_unittest.cc create mode 100644 googletest/test/gtest_premature_exit_test.cc create mode 100644 googletest/test/gtest_prod_test.cc create mode 100644 googletest/test/gtest_repeat_test.cc create mode 100755 googletest/test/gtest_shuffle_test.py create mode 100644 googletest/test/gtest_shuffle_test_.cc create mode 100644 googletest/test/gtest_sole_header_test.cc create mode 100644 googletest/test/gtest_stress_test.cc create mode 100755 googletest/test/gtest_test_utils.py create mode 100644 googletest/test/gtest_throw_on_failure_ex_test.cc create mode 100755 googletest/test/gtest_throw_on_failure_test.py create mode 100644 googletest/test/gtest_throw_on_failure_test_.cc create mode 100755 googletest/test/gtest_uninitialized_test.py create mode 100644 googletest/test/gtest_uninitialized_test_.cc create mode 100644 googletest/test/gtest_unittest.cc create mode 100644 googletest/test/gtest_xml_outfile1_test_.cc create mode 100644 googletest/test/gtest_xml_outfile2_test_.cc create mode 100755 googletest/test/gtest_xml_outfiles_test.py create mode 100755 googletest/test/gtest_xml_output_unittest.py create mode 100644 googletest/test/gtest_xml_output_unittest_.cc create mode 100755 googletest/test/gtest_xml_test_utils.py create mode 100644 googletest/test/production.cc create mode 100644 googletest/test/production.h create mode 100644 googletest/xcode/Config/DebugProject.xcconfig create mode 100644 googletest/xcode/Config/FrameworkTarget.xcconfig create mode 100644 googletest/xcode/Config/General.xcconfig create mode 100644 googletest/xcode/Config/ReleaseProject.xcconfig create mode 100644 googletest/xcode/Config/StaticLibraryTarget.xcconfig create mode 100644 googletest/xcode/Config/TestTarget.xcconfig create mode 100644 googletest/xcode/Resources/Info.plist create mode 100644 googletest/xcode/Samples/FrameworkSample/Info.plist create mode 100644 googletest/xcode/Samples/FrameworkSample/WidgetFramework.xcodeproj/project.pbxproj create mode 100644 googletest/xcode/Samples/FrameworkSample/runtests.sh create mode 100644 googletest/xcode/Samples/FrameworkSample/widget.cc create mode 100644 googletest/xcode/Samples/FrameworkSample/widget.h create mode 100644 googletest/xcode/Samples/FrameworkSample/widget_test.cc create mode 100644 googletest/xcode/Scripts/runtests.sh create mode 100755 googletest/xcode/Scripts/versiongenerate.py create mode 100644 googletest/xcode/gtest.xcodeproj/project.pbxproj create mode 100755 travis.sh diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..ce310bc --- /dev/null +++ b/.gitignore @@ -0,0 +1,2 @@ +# Ignore CI build directory +build/ diff --git a/.travis.yml b/.travis.yml new file mode 100644 index 0000000..3204dfa --- /dev/null +++ b/.travis.yml @@ -0,0 +1,46 @@ +# Build matrix / environment variable are explained on: +# http://about.travis-ci.org/docs/user/build-configuration/ +# This file can be validated on: +# http://lint.travis-ci.org/ + +install: +# /usr/bin/gcc is 4.6 always, but gcc-X.Y is available. +- if [ "$CXX" = "g++" ]; then export CXX="g++-4.9" CC="gcc-4.9"; fi +# /usr/bin/clang is 3.4, lets override with modern one. +- if [ "$CXX" = "clang++" ] && [ "$TRAVIS_OS_NAME" = "linux" ]; then export CXX="clang++-3.7" CC="clang-3.7"; fi +- echo ${PATH} +- echo ${CXX} +- ${CXX} --version +- ${CXX} -v +addons: + apt: + # List of whitelisted in travis packages for ubuntu-precise can be found here: + # https://github.com/travis-ci/apt-package-whitelist/blob/master/ubuntu-precise + # List of whitelisted in travis apt-sources: + # https://github.com/travis-ci/apt-source-whitelist/blob/master/ubuntu.json + sources: + - ubuntu-toolchain-r-test + - llvm-toolchain-precise-3.7 + packages: + - gcc-4.9 + - g++-4.9 + - clang-3.7 + - valgrind +os: + - linux + - osx +language: cpp +compiler: + - gcc + - clang +script: ./travis.sh +env: + matrix: + - GTEST_TARGET=googletest SHARED_LIB=OFF STATIC_LIB=ON CMAKE_PKG=OFF BUILD_TYPE=debug VERBOSE_MAKE=true VERBOSE + - GTEST_TARGET=googlemock SHARED_LIB=OFF STATIC_LIB=ON CMAKE_PKG=OFF BUILD_TYPE=debug VERBOSE_MAKE=true VERBOSE + - GTEST_TARGET=googlemock SHARED_LIB=OFF STATIC_LIB=ON CMAKE_PKG=OFF BUILD_TYPE=debug CXX_FLAGS=-std=c++11 VERBOSE_MAKE=true VERBOSE +# - GTEST_TARGET=googletest SHARED_LIB=ON STATIC_LIB=ON CMAKE_PKG=ON BUILD_TYPE=release VERBOSE_MAKE=false +# - GTEST_TARGET=googlemock SHARED_LIB=ON STATIC_LIB=ON CMAKE_PKG=ON BUILD_TYPE=release VERBOSE_MAKE=false +notifications: + email: false +sudo: false diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 0000000..8d2b552 --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,16 @@ +cmake_minimum_required(VERSION 2.6.2) + +project( googletest-distribution ) + +enable_testing() + +option(BUILD_GTEST "Builds the googletest subproject" OFF) + +#Note that googlemock target already builds googletest +option(BUILD_GMOCK "Builds the googlemock subproject" ON) + +if(BUILD_GMOCK) + add_subdirectory( googlemock ) +elseif(BUILD_GTEST) + add_subdirectory( googletest ) +endif() diff --git a/README.md b/README.md new file mode 100644 index 0000000..076484e --- /dev/null +++ b/README.md @@ -0,0 +1,142 @@ + +# Google Test # + +[![Build Status](https://travis-ci.org/google/googletest.svg?branch=master)](https://travis-ci.org/google/googletest) +[![Build status](https://ci.appveyor.com/api/projects/status/4o38plt0xbo1ubc8/branch/master?svg=true)](https://ci.appveyor.com/project/BillyDonahue/googletest/branch/master) + +Welcome to **Google Test**, Google's C++ test framework! + +This repository is a merger of the formerly separate GoogleTest and +GoogleMock projects. These were so closely related that it makes sense to +maintain and release them together. + +Please see the project page above for more information as well as the +mailing list for questions, discussions, and development. There is +also an IRC channel on OFTC (irc.oftc.net) #gtest available. Please +join us! + +Getting started information for **Google Test** is available in the +[Google Test Primer](googletest/docs/Primer.md) documentation. + +**Google Mock** is an extension to Google Test for writing and using C++ mock +classes. See the separate [Google Mock documentation](googlemock/README.md). + +More detailed documentation for googletest (including build instructions) are +in its interior [googletest/README.md](googletest/README.md) file. + +## Features ## + + * An [XUnit](https://en.wikipedia.org/wiki/XUnit) test framework. + * Test discovery. + * A rich set of assertions. + * User-defined assertions. + * Death tests. + * Fatal and non-fatal failures. + * Value-parameterized tests. + * Type-parameterized tests. + * Various options for running the tests. + * XML test report generation. + +## Platforms ## + +Google test has been used on a variety of platforms: + + * Linux + * Mac OS X + * Windows + * Cygwin + * MinGW + * Windows Mobile + * Symbian + +## Who Is Using Google Test? ## + +In addition to many internal projects at Google, Google Test is also used by +the following notable projects: + + * The [Chromium projects](http://www.chromium.org/) (behind the Chrome + browser and Chrome OS). + * The [LLVM](http://llvm.org/) compiler. + * [Protocol Buffers](https://github.com/google/protobuf), Google's data + interchange format. + * The [OpenCV](http://opencv.org/) computer vision library. + +## Related Open Source Projects ## + +[Google Test UI](https://github.com/ospector/gtest-gbar) is test runner that runs +your test binary, allows you to track its progress via a progress bar, and +displays a list of test failures. Clicking on one shows failure text. Google +Test UI is written in C#. + +[GTest TAP Listener](https://github.com/kinow/gtest-tap-listener) is an event +listener for Google Test that implements the +[TAP protocol](https://en.wikipedia.org/wiki/Test_Anything_Protocol) for test +result output. If your test runner understands TAP, you may find it useful. + +## Requirements ## + +Google Test is designed to have fairly minimal requirements to build +and use with your projects, but there are some. Currently, we support +Linux, Windows, Mac OS X, and Cygwin. We will also make our best +effort to support other platforms (e.g. Solaris, AIX, and z/OS). +However, since core members of the Google Test project have no access +to these platforms, Google Test may have outstanding issues there. If +you notice any problems on your platform, please notify +. Patches for fixing them are +even more welcome! + +### Linux Requirements ### + +These are the base requirements to build and use Google Test from a source +package (as described below): + + * GNU-compatible Make or gmake + * POSIX-standard shell + * POSIX(-2) Regular Expressions (regex.h) + * A C++98-standard-compliant compiler + +### Windows Requirements ### + + * Microsoft Visual C++ v7.1 or newer + +### Cygwin Requirements ### + + * Cygwin v1.5.25-14 or newer + +### Mac OS X Requirements ### + + * Mac OS X v10.4 Tiger or newer + * Xcode Developer Tools + +### Requirements for Contributors ### + +We welcome patches. If you plan to contribute a patch, you need to +build Google Test and its own tests from a git checkout (described +below), which has further requirements: + + * [Python](https://www.python.org/) v2.3 or newer (for running some of + the tests and re-generating certain source files from templates) + * [CMake](https://cmake.org/) v2.6.4 or newer + +## Regenerating Source Files ## + +Some of Google Test's source files are generated from templates (not +in the C++ sense) using a script. +For example, the +file include/gtest/internal/gtest-type-util.h.pump is used to generate +gtest-type-util.h in the same directory. + +You don't need to worry about regenerating the source files +unless you need to modify them. You would then modify the +corresponding `.pump` files and run the '[pump.py](googletest/scripts/pump.py)' +generator script. See the [Pump Manual](googletest/docs/PumpManual.md). + +### Contributing Code ### + +We welcome patches. Please read the +[Developer's Guide](googletest/docs/DevGuide.md) +for how you can contribute. In particular, make sure you have signed +the Contributor License Agreement, or we won't be able to accept the +patch. + +Happy testing! diff --git a/appveyor.yml b/appveyor.yml new file mode 100644 index 0000000..d613fd6 --- /dev/null +++ b/appveyor.yml @@ -0,0 +1,71 @@ +version: '{build}' + +os: Visual Studio 2015 + +environment: + matrix: + - Toolset: v140 + - Toolset: v120 + - Toolset: v110 + - Toolset: v100 + +platform: + - Win32 + - x64 + +configuration: +# - Release + - Debug + +build: + verbosity: minimal + +artifacts: + - path: '_build/Testing/Temporary/*' + name: test_results + +before_build: +- ps: | + Write-Output "Configuration: $env:CONFIGURATION" + Write-Output "Platform: $env:PLATFORM" + $generator = switch ($env:TOOLSET) + { + "v140" {"Visual Studio 14 2015"} + "v120" {"Visual Studio 12 2013"} + "v110" {"Visual Studio 11 2012"} + "v100" {"Visual Studio 10 2010"} + } + if ($env:PLATFORM -eq "x64") + { + $generator = "$generator Win64" + } + +build_script: +- ps: | + if (($env:TOOLSET -eq "v100") -and ($env:PLATFORM -eq "x64")) + { + return + } + md _build -Force | Out-Null + cd _build + + & cmake -G "$generator" -DCMAKE_CONFIGURATION_TYPES="Debug;Release" -Dgtest_build_tests=ON -Dgtest_build_samples=ON -Dgmock_build_tests=ON .. + if ($LastExitCode -ne 0) { + throw "Exec: $ErrorMessage" + } + & cmake --build . --config $env:CONFIGURATION + if ($LastExitCode -ne 0) { + throw "Exec: $ErrorMessage" + } + +test_script: +- ps: | + if (($env:Toolset -eq "v100") -and ($env:PLATFORM -eq "x64")) + { + return + } + + & ctest -C $env:CONFIGURATION --output-on-failure + if ($LastExitCode -ne 0) { + throw "Exec: $ErrorMessage" + } diff --git a/googlemock/CHANGES b/googlemock/CHANGES new file mode 100644 index 0000000..d6f2f76 --- /dev/null +++ b/googlemock/CHANGES @@ -0,0 +1,126 @@ +Changes for 1.7.0: + +* All new improvements in Google Test 1.7.0. +* New feature: matchers DoubleNear(), FloatNear(), + NanSensitiveDoubleNear(), NanSensitiveFloatNear(), + UnorderedElementsAre(), UnorderedElementsAreArray(), WhenSorted(), + WhenSortedBy(), IsEmpty(), and SizeIs(). +* Improvement: Google Mock can now be built as a DLL. +* Improvement: when compiled by a C++11 compiler, matchers AllOf() + and AnyOf() can accept an arbitrary number of matchers. +* Improvement: when compiled by a C++11 compiler, matchers + ElementsAreArray() can accept an initializer list. +* Improvement: when exceptions are enabled, a mock method with no + default action now throws instead crashing the test. +* Improvement: added class testing::StringMatchResultListener to aid + definition of composite matchers. +* Improvement: function return types used in MOCK_METHOD*() macros can + now contain unprotected commas. +* Improvement (potentially breaking): EXPECT_THAT() and ASSERT_THAT() + are now more strict in ensuring that the value type and the matcher + type are compatible, catching potential bugs in tests. +* Improvement: Pointee() now works on an optional. +* Improvement: the ElementsAreArray() matcher can now take a vector or + iterator range as input, and makes a copy of its input elements + before the conversion to a Matcher. +* Improvement: the Google Mock Generator can now generate mocks for + some class templates. +* Bug fix: mock object destruction triggerred by another mock object's + destruction no longer hangs. +* Improvement: Google Mock Doctor works better with newer Clang and + GCC now. +* Compatibility fixes. +* Bug/warning fixes. + +Changes for 1.6.0: + +* Compilation is much faster and uses much less memory, especially + when the constructor and destructor of a mock class are moved out of + the class body. +* New matchers: Pointwise(), Each(). +* New actions: ReturnPointee() and ReturnRefOfCopy(). +* CMake support. +* Project files for Visual Studio 2010. +* AllOf() and AnyOf() can handle up-to 10 arguments now. +* Google Mock doctor understands Clang error messages now. +* SetArgPointee<> now accepts string literals. +* gmock_gen.py handles storage specifier macros and template return + types now. +* Compatibility fixes. +* Bug fixes and implementation clean-ups. +* Potentially incompatible changes: disables the harmful 'make install' + command in autotools. + +Potentially breaking changes: + +* The description string for MATCHER*() changes from Python-style + interpolation to an ordinary C++ string expression. +* SetArgumentPointee is deprecated in favor of SetArgPointee. +* Some non-essential project files for Visual Studio 2005 are removed. + +Changes for 1.5.0: + + * New feature: Google Mock can be safely used in multi-threaded tests + on platforms having pthreads. + * New feature: function for printing a value of arbitrary type. + * New feature: function ExplainMatchResult() for easy definition of + composite matchers. + * The new matcher API lets user-defined matchers generate custom + explanations more directly and efficiently. + * Better failure messages all around. + * NotNull() and IsNull() now work with smart pointers. + * Field() and Property() now work when the matcher argument is a pointer + passed by reference. + * Regular expression matchers on all platforms. + * Added GCC 4.0 support for Google Mock Doctor. + * Added gmock_all_test.cc for compiling most Google Mock tests + in a single file. + * Significantly cleaned up compiler warnings. + * Bug fixes, better test coverage, and implementation clean-ups. + + Potentially breaking changes: + + * Custom matchers defined using MatcherInterface or MakePolymorphicMatcher() + need to be updated after upgrading to Google Mock 1.5.0; matchers defined + using MATCHER or MATCHER_P* aren't affected. + * Dropped support for 'make install'. + +Changes for 1.4.0 (we skipped 1.2.* and 1.3.* to match the version of +Google Test): + + * Works in more environments: Symbian and minGW, Visual C++ 7.1. + * Lighter weight: comes with our own implementation of TR1 tuple (no + more dependency on Boost!). + * New feature: --gmock_catch_leaked_mocks for detecting leaked mocks. + * New feature: ACTION_TEMPLATE for defining templatized actions. + * New feature: the .After() clause for specifying expectation order. + * New feature: the .With() clause for for specifying inter-argument + constraints. + * New feature: actions ReturnArg(), ReturnNew(...), and + DeleteArg(). + * New feature: matchers Key(), Pair(), Args<...>(), AllArgs(), IsNull(), + and Contains(). + * New feature: utility class MockFunction, useful for checkpoints, etc. + * New feature: functions Value(x, m) and SafeMatcherCast(m). + * New feature: copying a mock object is rejected at compile time. + * New feature: a script for fusing all Google Mock and Google Test + source files for easy deployment. + * Improved the Google Mock doctor to diagnose more diseases. + * Improved the Google Mock generator script. + * Compatibility fixes for Mac OS X and gcc. + * Bug fixes and implementation clean-ups. + +Changes for 1.1.0: + + * New feature: ability to use Google Mock with any testing framework. + * New feature: macros for easily defining new matchers + * New feature: macros for easily defining new actions. + * New feature: more container matchers. + * New feature: actions for accessing function arguments and throwing + exceptions. + * Improved the Google Mock doctor script for diagnosing compiler errors. + * Bug fixes and implementation clean-ups. + +Changes for 1.0.0: + + * Initial Open Source release of Google Mock diff --git a/googlemock/CMakeLists.txt b/googlemock/CMakeLists.txt new file mode 100644 index 0000000..beb259a --- /dev/null +++ b/googlemock/CMakeLists.txt @@ -0,0 +1,202 @@ +######################################################################## +# CMake build script for Google Mock. +# +# To run the tests for Google Mock itself on Linux, use 'make test' or +# ctest. You can select which tests to run using 'ctest -R regex'. +# For more options, run 'ctest --help'. + +# BUILD_SHARED_LIBS is a standard CMake variable, but we declare it here to +# make it prominent in the GUI. +option(BUILD_SHARED_LIBS "Build shared libraries (DLLs)." OFF) + +option(gmock_build_tests "Build all of Google Mock's own tests." OFF) + +# A directory to find Google Test sources. +if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/gtest/CMakeLists.txt") + set(gtest_dir gtest) +else() + set(gtest_dir ../googletest) +endif() + +# Defines pre_project_set_up_hermetic_build() and set_up_hermetic_build(). +include("${gtest_dir}/cmake/hermetic_build.cmake" OPTIONAL) + +if (COMMAND pre_project_set_up_hermetic_build) + # Google Test also calls hermetic setup functions from add_subdirectory, + # although its changes will not affect things at the current scope. + pre_project_set_up_hermetic_build() +endif() + +######################################################################## +# +# Project-wide settings + +# Name of the project. +# +# CMake files in this project can refer to the root source directory +# as ${gmock_SOURCE_DIR} and to the root binary directory as +# ${gmock_BINARY_DIR}. +# Language "C" is required for find_package(Threads). +project(gmock CXX C) +cmake_minimum_required(VERSION 2.6.2) + +if (COMMAND set_up_hermetic_build) + set_up_hermetic_build() +endif() + +# Instructs CMake to process Google Test's CMakeLists.txt and add its +# targets to the current scope. We are placing Google Test's binary +# directory in a subdirectory of our own as VC compilation may break +# if they are the same (the default). +add_subdirectory("${gtest_dir}" "${gmock_BINARY_DIR}/gtest") + +# Although Google Test's CMakeLists.txt calls this function, the +# changes there don't affect the current scope. Therefore we have to +# call it again here. +config_compiler_and_linker() # from ${gtest_dir}/cmake/internal_utils.cmake + +# Adds Google Mock's and Google Test's header directories to the search path. +include_directories("${gmock_SOURCE_DIR}/include" + "${gmock_SOURCE_DIR}" + "${gtest_SOURCE_DIR}/include" + # This directory is needed to build directly from Google + # Test sources. + "${gtest_SOURCE_DIR}") + +# Summary of tuple support for Microsoft Visual Studio: +# Compiler version(MS) version(cmake) Support +# ---------- ----------- -------------- ----------------------------- +# <= VS 2010 <= 10 <= 1600 Use Google Tests's own tuple. +# VS 2012 11 1700 std::tr1::tuple + _VARIADIC_MAX=10 +# VS 2013 12 1800 std::tr1::tuple +if (MSVC AND MSVC_VERSION EQUAL 1700) + add_definitions(/D _VARIADIC_MAX=10) +endif() + +######################################################################## +# +# Defines the gmock & gmock_main libraries. User tests should link +# with one of them. + +# Google Mock libraries. We build them using more strict warnings than what +# are used for other targets, to ensure that Google Mock can be compiled by +# a user aggressive about warnings. +cxx_library(gmock + "${cxx_strict}" + "${gtest_dir}/src/gtest-all.cc" + src/gmock-all.cc) + +cxx_library(gmock_main + "${cxx_strict}" + "${gtest_dir}/src/gtest-all.cc" + src/gmock-all.cc + src/gmock_main.cc) + +# If the CMake version supports it, attach header directory information +# to the targets for when we are part of a parent build (ie being pulled +# in via add_subdirectory() rather than being a standalone build). +if (DEFINED CMAKE_VERSION AND NOT "${CMAKE_VERSION}" VERSION_LESS "2.8.11") + target_include_directories(gmock INTERFACE "${gmock_SOURCE_DIR}/include") + target_include_directories(gmock_main INTERFACE "${gmock_SOURCE_DIR}/include") +endif() + +######################################################################## +# +# Install rules +install(TARGETS gmock gmock_main + DESTINATION lib) +install(DIRECTORY ${gmock_SOURCE_DIR}/include/gmock + DESTINATION include) + +######################################################################## +# +# Google Mock's own tests. +# +# You can skip this section if you aren't interested in testing +# Google Mock itself. +# +# The tests are not built by default. To build them, set the +# gmock_build_tests option to ON. You can do it by running ccmake +# or specifying the -Dgmock_build_tests=ON flag when running cmake. + +if (gmock_build_tests) + # This must be set in the root directory for the tests to be run by + # 'make test' or ctest. + enable_testing() + + ############################################################ + # C++ tests built with standard compiler flags. + + cxx_test(gmock-actions_test gmock_main) + cxx_test(gmock-cardinalities_test gmock_main) + cxx_test(gmock_ex_test gmock_main) + cxx_test(gmock-generated-actions_test gmock_main) + cxx_test(gmock-generated-function-mockers_test gmock_main) + cxx_test(gmock-generated-internal-utils_test gmock_main) + cxx_test(gmock-generated-matchers_test gmock_main) + cxx_test(gmock-internal-utils_test gmock_main) + cxx_test(gmock-matchers_test gmock_main) + cxx_test(gmock-more-actions_test gmock_main) + cxx_test(gmock-nice-strict_test gmock_main) + cxx_test(gmock-port_test gmock_main) + cxx_test(gmock-spec-builders_test gmock_main) + cxx_test(gmock_link_test gmock_main test/gmock_link2_test.cc) + cxx_test(gmock_test gmock_main) + + if (CMAKE_USE_PTHREADS_INIT) + cxx_test(gmock_stress_test gmock) + endif() + + # gmock_all_test is commented to save time building and running tests. + # Uncomment if necessary. + # cxx_test(gmock_all_test gmock_main) + + ############################################################ + # C++ tests built with non-standard compiler flags. + + cxx_library(gmock_main_no_exception "${cxx_no_exception}" + "${gtest_dir}/src/gtest-all.cc" src/gmock-all.cc src/gmock_main.cc) + + cxx_library(gmock_main_no_rtti "${cxx_no_rtti}" + "${gtest_dir}/src/gtest-all.cc" src/gmock-all.cc src/gmock_main.cc) + + if (NOT MSVC OR MSVC_VERSION LESS 1600) # 1600 is Visual Studio 2010. + # Visual Studio 2010, 2012, and 2013 define symbols in std::tr1 that + # conflict with our own definitions. Therefore using our own tuple does not + # work on those compilers. + cxx_library(gmock_main_use_own_tuple "${cxx_use_own_tuple}" + "${gtest_dir}/src/gtest-all.cc" src/gmock-all.cc src/gmock_main.cc) + + cxx_test_with_flags(gmock_use_own_tuple_test "${cxx_use_own_tuple}" + gmock_main_use_own_tuple test/gmock-spec-builders_test.cc) + endif() + + cxx_test_with_flags(gmock-more-actions_no_exception_test "${cxx_no_exception}" + gmock_main_no_exception test/gmock-more-actions_test.cc) + + cxx_test_with_flags(gmock_no_rtti_test "${cxx_no_rtti}" + gmock_main_no_rtti test/gmock-spec-builders_test.cc) + + cxx_shared_library(shared_gmock_main "${cxx_default}" + "${gtest_dir}/src/gtest-all.cc" src/gmock-all.cc src/gmock_main.cc) + + # Tests that a binary can be built with Google Mock as a shared library. On + # some system configurations, it may not possible to run the binary without + # knowing more details about the system configurations. We do not try to run + # this binary. To get a more robust shared library coverage, configure with + # -DBUILD_SHARED_LIBS=ON. + cxx_executable_with_flags(shared_gmock_test_ "${cxx_default}" + shared_gmock_main test/gmock-spec-builders_test.cc) + set_target_properties(shared_gmock_test_ + PROPERTIES + COMPILE_DEFINITIONS "GTEST_LINKED_AS_SHARED_LIBRARY=1") + + ############################################################ + # Python tests. + + cxx_executable(gmock_leak_test_ test gmock_main) + py_test(gmock_leak_test) + + cxx_executable(gmock_output_test_ test gmock) + py_test(gmock_output_test) +endif() diff --git a/googlemock/CONTRIBUTORS b/googlemock/CONTRIBUTORS new file mode 100644 index 0000000..6e9ae36 --- /dev/null +++ b/googlemock/CONTRIBUTORS @@ -0,0 +1,40 @@ +# This file contains a list of people who've made non-trivial +# contribution to the Google C++ Mocking Framework project. People +# who commit code to the project are encouraged to add their names +# here. Please keep the list sorted by first names. + +Benoit Sigoure +Bogdan Piloca +Chandler Carruth +Dave MacLachlan +David Anderson +Dean Sturtevant +Gene Volovich +Hal Burch +Jeffrey Yasskin +Jim Keller +Joe Walnes +Jon Wray +Keir Mierle +Keith Ray +Kostya Serebryany +Lev Makhlis +Manuel Klimek +Mario Tanev +Mark Paskin +Markus Heule +Matthew Simmons +Mike Bland +Neal Norwitz +Nermin Ozkiranartli +Owen Carlsen +Paneendra Ba +Paul Menage +Piotr Kaminski +Russ Rufer +Sverre Sundsdal +Takeshi Yoshino +Vadim Berman +Vlad Losev +Wolfgang Klier +Zhanyong Wan diff --git a/googlemock/LICENSE b/googlemock/LICENSE new file mode 100644 index 0000000..1941a11 --- /dev/null +++ b/googlemock/LICENSE @@ -0,0 +1,28 @@ +Copyright 2008, Google Inc. +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above +copyright notice, this list of conditions and the following disclaimer +in the documentation and/or other materials provided with the +distribution. + * Neither the name of Google Inc. nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/googlemock/Makefile.am b/googlemock/Makefile.am new file mode 100644 index 0000000..9adbc51 --- /dev/null +++ b/googlemock/Makefile.am @@ -0,0 +1,224 @@ +# Automake file + +# Nonstandard package files for distribution. +EXTRA_DIST = LICENSE + +# We may need to build our internally packaged gtest. If so, it will be +# included in the 'subdirs' variable. +SUBDIRS = $(subdirs) + +# This is generated by the configure script, so clean it for distribution. +DISTCLEANFILES = scripts/gmock-config + +# We define the global AM_CPPFLAGS as everything we compile includes from these +# directories. +AM_CPPFLAGS = $(GTEST_CPPFLAGS) -I$(srcdir)/include + +# Modifies compiler and linker flags for pthreads compatibility. +if HAVE_PTHREADS + AM_CXXFLAGS = @PTHREAD_CFLAGS@ -DGTEST_HAS_PTHREAD=1 + AM_LIBS = @PTHREAD_LIBS@ +endif + +# Build rules for libraries. +lib_LTLIBRARIES = lib/libgmock.la lib/libgmock_main.la + +lib_libgmock_la_SOURCES = src/gmock-all.cc + +pkginclude_HEADERS = \ + include/gmock/gmock-actions.h \ + include/gmock/gmock-cardinalities.h \ + include/gmock/gmock-generated-actions.h \ + include/gmock/gmock-generated-function-mockers.h \ + include/gmock/gmock-generated-matchers.h \ + include/gmock/gmock-generated-nice-strict.h \ + include/gmock/gmock-matchers.h \ + include/gmock/gmock-more-actions.h \ + include/gmock/gmock-more-matchers.h \ + include/gmock/gmock-spec-builders.h \ + include/gmock/gmock.h + +pkginclude_internaldir = $(pkgincludedir)/internal +pkginclude_internal_HEADERS = \ + include/gmock/internal/gmock-generated-internal-utils.h \ + include/gmock/internal/gmock-internal-utils.h \ + include/gmock/internal/gmock-port.h \ + include/gmock/internal/custom/gmock-generated-actions.h \ + include/gmock/internal/custom/gmock-matchers.h \ + include/gmock/internal/custom/gmock-port.h + +lib_libgmock_main_la_SOURCES = src/gmock_main.cc +lib_libgmock_main_la_LIBADD = lib/libgmock.la + +# Build rules for tests. Automake's naming for some of these variables isn't +# terribly obvious, so this is a brief reference: +# +# TESTS -- Programs run automatically by "make check" +# check_PROGRAMS -- Programs built by "make check" but not necessarily run + +TESTS= +check_PROGRAMS= +AM_LDFLAGS = $(GTEST_LDFLAGS) + +# This exercises all major components of Google Mock. It also +# verifies that libgmock works. +TESTS += test/gmock-spec-builders_test +check_PROGRAMS += test/gmock-spec-builders_test +test_gmock_spec_builders_test_SOURCES = test/gmock-spec-builders_test.cc +test_gmock_spec_builders_test_LDADD = $(GTEST_LIBS) lib/libgmock.la + +# This tests using Google Mock in multiple translation units. It also +# verifies that libgmock_main and libgmock work. +TESTS += test/gmock_link_test +check_PROGRAMS += test/gmock_link_test +test_gmock_link_test_SOURCES = \ + test/gmock_link2_test.cc \ + test/gmock_link_test.cc \ + test/gmock_link_test.h +test_gmock_link_test_LDADD = $(GTEST_LIBS) lib/libgmock_main.la lib/libgmock.la + +if HAVE_PYTHON + # Tests that fused gmock files compile and work. + TESTS += test/gmock_fused_test + check_PROGRAMS += test/gmock_fused_test + test_gmock_fused_test_SOURCES = \ + fused-src/gmock-gtest-all.cc \ + fused-src/gmock/gmock.h \ + fused-src/gmock_main.cc \ + fused-src/gtest/gtest.h \ + test/gmock_test.cc + test_gmock_fused_test_CPPFLAGS = -I"$(srcdir)/fused-src" +endif + +# Google Mock source files that we don't compile directly. +GMOCK_SOURCE_INGLUDES = \ + src/gmock-cardinalities.cc \ + src/gmock-internal-utils.cc \ + src/gmock-matchers.cc \ + src/gmock-spec-builders.cc \ + src/gmock.cc + +EXTRA_DIST += $(GMOCK_SOURCE_INGLUDES) + +# C++ tests that we don't compile using autotools. +EXTRA_DIST += \ + test/gmock-actions_test.cc \ + test/gmock_all_test.cc \ + test/gmock-cardinalities_test.cc \ + test/gmock_ex_test.cc \ + test/gmock-generated-actions_test.cc \ + test/gmock-generated-function-mockers_test.cc \ + test/gmock-generated-internal-utils_test.cc \ + test/gmock-generated-matchers_test.cc \ + test/gmock-internal-utils_test.cc \ + test/gmock-matchers_test.cc \ + test/gmock-more-actions_test.cc \ + test/gmock-nice-strict_test.cc \ + test/gmock-port_test.cc \ + test/gmock_stress_test.cc + +# Python tests, which we don't run using autotools. +EXTRA_DIST += \ + test/gmock_leak_test.py \ + test/gmock_leak_test_.cc \ + test/gmock_output_test.py \ + test/gmock_output_test_.cc \ + test/gmock_output_test_golden.txt \ + test/gmock_test_utils.py + +# Nonstandard package files for distribution. +EXTRA_DIST += \ + CHANGES \ + CONTRIBUTORS \ + make/Makefile + +# Pump scripts for generating Google Mock headers. +# TODO(chandlerc@google.com): automate the generation of *.h from *.h.pump. +EXTRA_DIST += \ + include/gmock/gmock-generated-actions.h.pump \ + include/gmock/gmock-generated-function-mockers.h.pump \ + include/gmock/gmock-generated-matchers.h.pump \ + include/gmock/gmock-generated-nice-strict.h.pump \ + include/gmock/internal/gmock-generated-internal-utils.h.pump \ + include/gmock/internal/custom/gmock-generated-actions.h.pump + +# Script for fusing Google Mock and Google Test source files. +EXTRA_DIST += scripts/fuse_gmock_files.py + +# The Google Mock Generator tool from the cppclean project. +EXTRA_DIST += \ + scripts/generator/LICENSE \ + scripts/generator/README \ + scripts/generator/README.cppclean \ + scripts/generator/cpp/__init__.py \ + scripts/generator/cpp/ast.py \ + scripts/generator/cpp/gmock_class.py \ + scripts/generator/cpp/keywords.py \ + scripts/generator/cpp/tokenize.py \ + scripts/generator/cpp/utils.py \ + scripts/generator/gmock_gen.py + +# Script for diagnosing compiler errors in programs that use Google +# Mock. +EXTRA_DIST += scripts/gmock_doctor.py + +# CMake scripts. +EXTRA_DIST += \ + CMakeLists.txt + +# Microsoft Visual Studio 2005 projects. +EXTRA_DIST += \ + msvc/2005/gmock.sln \ + msvc/2005/gmock.vcproj \ + msvc/2005/gmock_config.vsprops \ + msvc/2005/gmock_main.vcproj \ + msvc/2005/gmock_test.vcproj + +# Microsoft Visual Studio 2010 projects. +EXTRA_DIST += \ + msvc/2010/gmock.sln \ + msvc/2010/gmock.vcxproj \ + msvc/2010/gmock_config.props \ + msvc/2010/gmock_main.vcxproj \ + msvc/2010/gmock_test.vcxproj + +if HAVE_PYTHON +# gmock_test.cc does not really depend on files generated by the +# fused-gmock-internal rule. However, gmock_test.o does, and it is +# important to include test/gmock_test.cc as part of this rule in order to +# prevent compiling gmock_test.o until all dependent files have been +# generated. +$(test_gmock_fused_test_SOURCES): fused-gmock-internal + +# TODO(vladl@google.com): Find a way to add Google Tests's sources here. +fused-gmock-internal: $(pkginclude_HEADERS) $(pkginclude_internal_HEADERS) \ + $(lib_libgmock_la_SOURCES) $(GMOCK_SOURCE_INGLUDES) \ + $(lib_libgmock_main_la_SOURCES) \ + scripts/fuse_gmock_files.py + mkdir -p "$(srcdir)/fused-src" + chmod -R u+w "$(srcdir)/fused-src" + rm -f "$(srcdir)/fused-src/gtest/gtest.h" + rm -f "$(srcdir)/fused-src/gmock/gmock.h" + rm -f "$(srcdir)/fused-src/gmock-gtest-all.cc" + "$(srcdir)/scripts/fuse_gmock_files.py" "$(srcdir)/fused-src" + cp -f "$(srcdir)/src/gmock_main.cc" "$(srcdir)/fused-src" + +maintainer-clean-local: + rm -rf "$(srcdir)/fused-src" +endif + +# Death tests may produce core dumps in the build directory. In case +# this happens, clean them to keep distcleancheck happy. +CLEANFILES = core + +# Disables 'make install' as installing a compiled version of Google +# Mock can lead to undefined behavior due to violation of the +# One-Definition Rule. + +install-exec-local: + echo "'make install' is dangerous and not supported. Instead, see README for how to integrate Google Mock into your build system." + false + +install-data-local: + echo "'make install' is dangerous and not supported. Instead, see README for how to integrate Google Mock into your build system." + false diff --git a/googlemock/README.md b/googlemock/README.md new file mode 100644 index 0000000..332beab --- /dev/null +++ b/googlemock/README.md @@ -0,0 +1,333 @@ +## Google Mock ## + +The Google C++ mocking framework. + +### Overview ### + +Google's framework for writing and using C++ mock classes. +It can help you derive better designs of your system and write better tests. + +It is inspired by: + + * [jMock](http://www.jmock.org/), + * [EasyMock](http://www.easymock.org/), and + * [Hamcrest](http://code.google.com/p/hamcrest/), + +and designed with C++'s specifics in mind. + +Google mock: + + * lets you create mock classes trivially using simple macros. + * supports a rich set of matchers and actions. + * handles unordered, partially ordered, or completely ordered expectations. + * is extensible by users. + +We hope you find it useful! + +### Features ### + + * Provides a declarative syntax for defining mocks. + * Can easily define partial (hybrid) mocks, which are a cross of real + and mock objects. + * Handles functions of arbitrary types and overloaded functions. + * Comes with a rich set of matchers for validating function arguments. + * Uses an intuitive syntax for controlling the behavior of a mock. + * Does automatic verification of expectations (no record-and-replay needed). + * Allows arbitrary (partial) ordering constraints on + function calls to be expressed,. + * Lets a user extend it by defining new matchers and actions. + * Does not use exceptions. + * Is easy to learn and use. + +Please see the project page above for more information as well as the +mailing list for questions, discussions, and development. There is +also an IRC channel on OFTC (irc.oftc.net) #gtest available. Please +join us! + +Please note that code under [scripts/generator](scripts/generator/) is +from [cppclean](http://code.google.com/p/cppclean/) and released under +the Apache License, which is different from Google Mock's license. + +## Getting Started ## + +If you are new to the project, we suggest that you read the user +documentation in the following order: + + * Learn the [basics](../googletest/docs/Primer.md) of + Google Test, if you choose to use Google Mock with it (recommended). + * Read [Google Mock for Dummies](docs/ForDummies.md). + * Read the instructions below on how to build Google Mock. + +You can also watch Zhanyong's [talk](http://www.youtube.com/watch?v=sYpCyLI47rM) on Google Mock's usage and implementation. + +Once you understand the basics, check out the rest of the docs: + + * [CheatSheet](docs/CheatSheet.md) - all the commonly used stuff + at a glance. + * [CookBook](docs/CookBook.md) - recipes for getting things done, + including advanced techniques. + +If you need help, please check the +[KnownIssues](docs/KnownIssues.md) and +[FrequentlyAskedQuestions](docs/FrequentlyAskedQuestions.md) before +posting a question on the +[discussion group](http://groups.google.com/group/googlemock). + + +### Using Google Mock Without Google Test ### + +Google Mock is not a testing framework itself. Instead, it needs a +testing framework for writing tests. Google Mock works seamlessly +with [Google Test](http://code.google.com/p/googletest/), but +you can also use it with [any C++ testing framework](googlemock/ForDummies.md#Using_Google_Mock_with_Any_Testing_Framework). + +### Requirements for End Users ### + +Google Mock is implemented on top of [Google Test]( +http://github.com/google/googletest/), and depends on it. +You must use the bundled version of Google Test when using Google Mock. + +You can also easily configure Google Mock to work with another testing +framework, although it will still need Google Test. Please read +["Using_Google_Mock_with_Any_Testing_Framework"]( + docs/ForDummies.md#Using_Google_Mock_with_Any_Testing_Framework) +for instructions. + +Google Mock depends on advanced C++ features and thus requires a more +modern compiler. The following are needed to use Google Mock: + +#### Linux Requirements #### + + * GNU-compatible Make or "gmake" + * POSIX-standard shell + * POSIX(-2) Regular Expressions (regex.h) + * C++98-standard-compliant compiler (e.g. GCC 3.4 or newer) + +#### Windows Requirements #### + + * Microsoft Visual C++ 8.0 SP1 or newer + +#### Mac OS X Requirements #### + + * Mac OS X 10.4 Tiger or newer + * Developer Tools Installed + +### Requirements for Contributors ### + +We welcome patches. If you plan to contribute a patch, you need to +build Google Mock and its tests, which has further requirements: + + * Automake version 1.9 or newer + * Autoconf version 2.59 or newer + * Libtool / Libtoolize + * Python version 2.3 or newer (for running some of the tests and + re-generating certain source files from templates) + +### Building Google Mock ### + +#### Preparing to Build (Unix only) #### + +If you are using a Unix system and plan to use the GNU Autotools build +system to build Google Mock (described below), you'll need to +configure it now. + +To prepare the Autotools build system: + + cd googlemock + autoreconf -fvi + +To build Google Mock and your tests that use it, you need to tell your +build system where to find its headers and source files. The exact +way to do it depends on which build system you use, and is usually +straightforward. + +This section shows how you can integrate Google Mock into your +existing build system. + +Suppose you put Google Mock in directory `${GMOCK_DIR}` and Google Test +in `${GTEST_DIR}` (the latter is `${GMOCK_DIR}/gtest` by default). To +build Google Mock, create a library build target (or a project as +called by Visual Studio and Xcode) to compile + + ${GTEST_DIR}/src/gtest-all.cc and ${GMOCK_DIR}/src/gmock-all.cc + +with + + ${GTEST_DIR}/include and ${GMOCK_DIR}/include + +in the system header search path, and + + ${GTEST_DIR} and ${GMOCK_DIR} + +in the normal header search path. Assuming a Linux-like system and gcc, +something like the following will do: + + g++ -isystem ${GTEST_DIR}/include -I${GTEST_DIR} \ + -isystem ${GMOCK_DIR}/include -I${GMOCK_DIR} \ + -pthread -c ${GTEST_DIR}/src/gtest-all.cc + g++ -isystem ${GTEST_DIR}/include -I${GTEST_DIR} \ + -isystem ${GMOCK_DIR}/include -I${GMOCK_DIR} \ + -pthread -c ${GMOCK_DIR}/src/gmock-all.cc + ar -rv libgmock.a gtest-all.o gmock-all.o + +(We need -pthread as Google Test and Google Mock use threads.) + +Next, you should compile your test source file with +${GTEST\_DIR}/include and ${GMOCK\_DIR}/include in the header search +path, and link it with gmock and any other necessary libraries: + + g++ -isystem ${GTEST_DIR}/include -isystem ${GMOCK_DIR}/include \ + -pthread path/to/your_test.cc libgmock.a -o your_test + +As an example, the make/ directory contains a Makefile that you can +use to build Google Mock on systems where GNU make is available +(e.g. Linux, Mac OS X, and Cygwin). It doesn't try to build Google +Mock's own tests. Instead, it just builds the Google Mock library and +a sample test. You can use it as a starting point for your own build +script. + +If the default settings are correct for your environment, the +following commands should succeed: + + cd ${GMOCK_DIR}/make + make + ./gmock_test + +If you see errors, try to tweak the contents of +[make/Makefile](make/Makefile) to make them go away. + +### Windows ### + +The msvc/2005 directory contains VC++ 2005 projects and the msvc/2010 +directory contains VC++ 2010 projects for building Google Mock and +selected tests. + +Change to the appropriate directory and run "msbuild gmock.sln" to +build the library and tests (or open the gmock.sln in the MSVC IDE). +If you want to create your own project to use with Google Mock, you'll +have to configure it to use the `gmock_config` propety sheet. For that: + + * Open the Property Manager window (View | Other Windows | Property Manager) + * Right-click on your project and select "Add Existing Property Sheet..." + * Navigate to `gmock_config.vsprops` or `gmock_config.props` and select it. + * In Project Properties | Configuration Properties | General | Additional + Include Directories, type /include. + +### Tweaking Google Mock ### + +Google Mock can be used in diverse environments. The default +configuration may not work (or may not work well) out of the box in +some environments. However, you can easily tweak Google Mock by +defining control macros on the compiler command line. Generally, +these macros are named like `GTEST_XYZ` and you define them to either 1 +or 0 to enable or disable a certain feature. + +We list the most frequently used macros below. For a complete list, +see file [${GTEST\_DIR}/include/gtest/internal/gtest-port.h]( +../googletest/include/gtest/internal/gtest-port.h). + +### Choosing a TR1 Tuple Library ### + +Google Mock uses the C++ Technical Report 1 (TR1) tuple library +heavily. Unfortunately TR1 tuple is not yet widely available with all +compilers. The good news is that Google Test 1.4.0+ implements a +subset of TR1 tuple that's enough for Google Mock's need. Google Mock +will automatically use that implementation when the compiler doesn't +provide TR1 tuple. + +Usually you don't need to care about which tuple library Google Test +and Google Mock use. However, if your project already uses TR1 tuple, +you need to tell Google Test and Google Mock to use the same TR1 tuple +library the rest of your project uses, or the two tuple +implementations will clash. To do that, add + + -DGTEST_USE_OWN_TR1_TUPLE=0 + +to the compiler flags while compiling Google Test, Google Mock, and +your tests. If you want to force Google Test and Google Mock to use +their own tuple library, just add + + -DGTEST_USE_OWN_TR1_TUPLE=1 + +to the compiler flags instead. + +If you want to use Boost's TR1 tuple library with Google Mock, please +refer to the Boost website (http://www.boost.org/) for how to obtain +it and set it up. + +### As a Shared Library (DLL) ### + +Google Mock is compact, so most users can build and link it as a static +library for the simplicity. Google Mock can be used as a DLL, but the +same DLL must contain Google Test as well. See +[Google Test's README][gtest_readme] +for instructions on how to set up necessary compiler settings. + +### Tweaking Google Mock ### + +Most of Google Test's control macros apply to Google Mock as well. +Please see [Google Test's README][gtest_readme] for how to tweak them. + +### Upgrading from an Earlier Version ### + +We strive to keep Google Mock releases backward compatible. +Sometimes, though, we have to make some breaking changes for the +users' long-term benefits. This section describes what you'll need to +do if you are upgrading from an earlier version of Google Mock. + +#### Upgrading from 1.1.0 or Earlier #### + +You may need to explicitly enable or disable Google Test's own TR1 +tuple library. See the instructions in section "[Choosing a TR1 Tuple +Library](../googletest/#choosing-a-tr1-tuple-library)". + +#### Upgrading from 1.4.0 or Earlier #### + +On platforms where the pthread library is available, Google Test and +Google Mock use it in order to be thread-safe. For this to work, you +may need to tweak your compiler and/or linker flags. Please see the +"[Multi-threaded Tests](../googletest#multi-threaded-tests +)" section in file Google Test's README for what you may need to do. + +If you have custom matchers defined using `MatcherInterface` or +`MakePolymorphicMatcher()`, you'll need to update their definitions to +use the new matcher API ( +[monomorphic](http://code.google.com/p/googlemock/wiki/CookBook#Writing_New_Monomorphic_Matchers), +[polymorphic](http://code.google.com/p/googlemock/wiki/CookBook#Writing_New_Polymorphic_Matchers)). +Matchers defined using `MATCHER()` or `MATCHER_P*()` aren't affected. + +### Developing Google Mock ### + +This section discusses how to make your own changes to Google Mock. + +#### Testing Google Mock Itself #### + +To make sure your changes work as intended and don't break existing +functionality, you'll want to compile and run Google Test's own tests. +For that you'll need Autotools. First, make sure you have followed +the instructions above to configure Google Mock. +Then, create a build output directory and enter it. Next, + + ${GMOCK_DIR}/configure # try --help for more info + +Once you have successfully configured Google Mock, the build steps are +standard for GNU-style OSS packages. + + make # Standard makefile following GNU conventions + make check # Builds and runs all tests - all should pass. + +Note that when building your project against Google Mock, you are building +against Google Test as well. There is no need to configure Google Test +separately. + +#### Contributing a Patch #### + +We welcome patches. +Please read the [Developer's Guide](docs/DevGuide.md) +for how you can contribute. In particular, make sure you have signed +the Contributor License Agreement, or we won't be able to accept the +patch. + +Happy testing! + +[gtest_readme]: ../googletest/README.md "googletest" diff --git a/googlemock/build-aux/.keep b/googlemock/build-aux/.keep new file mode 100644 index 0000000..e69de29 diff --git a/googlemock/configure.ac b/googlemock/configure.ac new file mode 100644 index 0000000..3b740f2 --- /dev/null +++ b/googlemock/configure.ac @@ -0,0 +1,146 @@ +m4_include(../googletest/m4/acx_pthread.m4) + +AC_INIT([Google C++ Mocking Framework], + [1.7.0], + [googlemock@googlegroups.com], + [gmock]) + +# Provide various options to initialize the Autoconf and configure processes. +AC_PREREQ([2.59]) +AC_CONFIG_SRCDIR([./LICENSE]) +AC_CONFIG_AUX_DIR([build-aux]) +AC_CONFIG_HEADERS([build-aux/config.h]) +AC_CONFIG_FILES([Makefile]) +AC_CONFIG_FILES([scripts/gmock-config], [chmod +x scripts/gmock-config]) + +# Initialize Automake with various options. We require at least v1.9, prevent +# pedantic complaints about package files, and enable various distribution +# targets. +AM_INIT_AUTOMAKE([1.9 dist-bzip2 dist-zip foreign subdir-objects]) + +# Check for programs used in building Google Test. +AC_PROG_CC +AC_PROG_CXX +AC_LANG([C++]) +AC_PROG_LIBTOOL + +# TODO(chandlerc@google.com): Currently we aren't running the Python tests +# against the interpreter detected by AM_PATH_PYTHON, and so we condition +# HAVE_PYTHON by requiring "python" to be in the PATH, and that interpreter's +# version to be >= 2.3. This will allow the scripts to use a "/usr/bin/env" +# hashbang. +PYTHON= # We *do not* allow the user to specify a python interpreter +AC_PATH_PROG([PYTHON],[python],[:]) +AS_IF([test "$PYTHON" != ":"], + [AM_PYTHON_CHECK_VERSION([$PYTHON],[2.3],[:],[PYTHON=":"])]) +AM_CONDITIONAL([HAVE_PYTHON],[test "$PYTHON" != ":"]) + +# TODO(chandlerc@google.com) Check for the necessary system headers. + +# Configure pthreads. +AC_ARG_WITH([pthreads], + [AS_HELP_STRING([--with-pthreads], + [use pthreads (default is yes)])], + [with_pthreads=$withval], + [with_pthreads=check]) + +have_pthreads=no +AS_IF([test "x$with_pthreads" != "xno"], + [ACX_PTHREAD( + [], + [AS_IF([test "x$with_pthreads" != "xcheck"], + [AC_MSG_FAILURE( + [--with-pthreads was specified, but unable to be used])])]) + have_pthreads="$acx_pthread_ok"]) +AM_CONDITIONAL([HAVE_PTHREADS],[test "x$have_pthreads" == "xyes"]) +AC_SUBST(PTHREAD_CFLAGS) +AC_SUBST(PTHREAD_LIBS) + +# GoogleMock currently has hard dependencies upon GoogleTest above and beyond +# running its own test suite, so we both provide our own version in +# a subdirectory and provide some logic to use a custom version or a system +# installed version. +AC_ARG_WITH([gtest], + [AS_HELP_STRING([--with-gtest], + [Specifies how to find the gtest package. If no + arguments are given, the default behavior, a + system installed gtest will be used if present, + and an internal version built otherwise. If a + path is provided, the gtest built or installed at + that prefix will be used.])], + [], + [with_gtest=yes]) +AC_ARG_ENABLE([external-gtest], + [AS_HELP_STRING([--disable-external-gtest], + [Disables any detection or use of a system + installed or user provided gtest. Any option to + '--with-gtest' is ignored. (Default is enabled.)]) + ], [], [enable_external_gtest=yes]) +AS_IF([test "x$with_gtest" == "xno"], + [AC_MSG_ERROR([dnl +Support for GoogleTest was explicitly disabled. Currently GoogleMock has a hard +dependency upon GoogleTest to build, please provide a version, or allow +GoogleMock to use any installed version and fall back upon its internal +version.])]) + +# Setup various GTEST variables. TODO(chandlerc@google.com): When these are +# used below, they should be used such that any pre-existing values always +# trump values we set them to, so that they can be used to selectively override +# details of the detection process. +AC_ARG_VAR([GTEST_CONFIG], + [The exact path of Google Test's 'gtest-config' script.]) +AC_ARG_VAR([GTEST_CPPFLAGS], + [C-like preprocessor flags for Google Test.]) +AC_ARG_VAR([GTEST_CXXFLAGS], + [C++ compile flags for Google Test.]) +AC_ARG_VAR([GTEST_LDFLAGS], + [Linker path and option flags for Google Test.]) +AC_ARG_VAR([GTEST_LIBS], + [Library linking flags for Google Test.]) +AC_ARG_VAR([GTEST_VERSION], + [The version of Google Test available.]) +HAVE_BUILT_GTEST="no" + +GTEST_MIN_VERSION="1.7.0" + +AS_IF([test "x${enable_external_gtest}" = "xyes"], + [# Begin filling in variables as we are able. + AS_IF([test "x${with_gtest}" != "xyes"], + [AS_IF([test -x "${with_gtest}/scripts/gtest-config"], + [GTEST_CONFIG="${with_gtest}/scripts/gtest-config"], + [GTEST_CONFIG="${with_gtest}/bin/gtest-config"]) + AS_IF([test -x "${GTEST_CONFIG}"], [], + [AC_MSG_ERROR([dnl +Unable to locate either a built or installed Google Test at '${with_gtest}'.]) + ])]) + + AS_IF([test -x "${GTEST_CONFIG}"], [], + [AC_PATH_PROG([GTEST_CONFIG], [gtest-config])]) + AS_IF([test -x "${GTEST_CONFIG}"], + [AC_MSG_CHECKING([for Google Test version >= ${GTEST_MIN_VERSION}]) + AS_IF([${GTEST_CONFIG} --min-version=${GTEST_MIN_VERSION}], + [AC_MSG_RESULT([yes]) + HAVE_BUILT_GTEST="yes"], + [AC_MSG_RESULT([no])])])]) + +AS_IF([test "x${HAVE_BUILT_GTEST}" = "xyes"], + [GTEST_CPPFLAGS=`${GTEST_CONFIG} --cppflags` + GTEST_CXXFLAGS=`${GTEST_CONFIG} --cxxflags` + GTEST_LDFLAGS=`${GTEST_CONFIG} --ldflags` + GTEST_LIBS=`${GTEST_CONFIG} --libs` + GTEST_VERSION=`${GTEST_CONFIG} --version`], + [AC_CONFIG_SUBDIRS([../googletest]) + # GTEST_CONFIG needs to be executable both in a Makefile environmont and + # in a shell script environment, so resolve an absolute path for it here. + GTEST_CONFIG="`pwd -P`/../googletest/scripts/gtest-config" + GTEST_CPPFLAGS='-I$(top_srcdir)/../googletest/include' + GTEST_CXXFLAGS='-g' + GTEST_LDFLAGS='' + GTEST_LIBS='$(top_builddir)/../googletest/lib/libgtest.la' + GTEST_VERSION="${GTEST_MIN_VERSION}"]) + +# TODO(chandlerc@google.com) Check the types, structures, and other compiler +# and architecture characteristics. + +# Output the generated files. No further autoconf macros may be used. +AC_OUTPUT diff --git a/googlemock/docs/CheatSheet.md b/googlemock/docs/CheatSheet.md new file mode 100644 index 0000000..ef4451b --- /dev/null +++ b/googlemock/docs/CheatSheet.md @@ -0,0 +1,562 @@ + + +# Defining a Mock Class # + +## Mocking a Normal Class ## + +Given +``` +class Foo { + ... + virtual ~Foo(); + virtual int GetSize() const = 0; + virtual string Describe(const char* name) = 0; + virtual string Describe(int type) = 0; + virtual bool Process(Bar elem, int count) = 0; +}; +``` +(note that `~Foo()` **must** be virtual) we can define its mock as +``` +#include "gmock/gmock.h" + +class MockFoo : public Foo { + MOCK_CONST_METHOD0(GetSize, int()); + MOCK_METHOD1(Describe, string(const char* name)); + MOCK_METHOD1(Describe, string(int type)); + MOCK_METHOD2(Process, bool(Bar elem, int count)); +}; +``` + +To create a "nice" mock object which ignores all uninteresting calls, +or a "strict" mock object, which treats them as failures: +``` +NiceMock nice_foo; // The type is a subclass of MockFoo. +StrictMock strict_foo; // The type is a subclass of MockFoo. +``` + +## Mocking a Class Template ## + +To mock +``` +template +class StackInterface { + public: + ... + virtual ~StackInterface(); + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; +``` +(note that `~StackInterface()` **must** be virtual) just append `_T` to the `MOCK_*` macros: +``` +template +class MockStack : public StackInterface { + public: + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Specifying Calling Conventions for Mock Functions ## + +If your mock function doesn't use the default calling convention, you +can specify it by appending `_WITH_CALLTYPE` to any of the macros +described in the previous two sections and supplying the calling +convention as the first argument to the macro. For example, +``` + MOCK_METHOD_1_WITH_CALLTYPE(STDMETHODCALLTYPE, Foo, bool(int n)); + MOCK_CONST_METHOD2_WITH_CALLTYPE(STDMETHODCALLTYPE, Bar, int(double x, double y)); +``` +where `STDMETHODCALLTYPE` is defined by `` on Windows. + +# Using Mocks in Tests # + +The typical flow is: + 1. Import the Google Mock names you need to use. All Google Mock names are in the `testing` namespace unless they are macros or otherwise noted. + 1. Create the mock objects. + 1. Optionally, set the default actions of the mock objects. + 1. Set your expectations on the mock objects (How will they be called? What wil they do?). + 1. Exercise code that uses the mock objects; if necessary, check the result using [Google Test](../../googletest/) assertions. + 1. When a mock objects is destructed, Google Mock automatically verifies that all expectations on it have been satisfied. + +Here is an example: +``` +using ::testing::Return; // #1 + +TEST(BarTest, DoesThis) { + MockFoo foo; // #2 + + ON_CALL(foo, GetSize()) // #3 + .WillByDefault(Return(1)); + // ... other default actions ... + + EXPECT_CALL(foo, Describe(5)) // #4 + .Times(3) + .WillRepeatedly(Return("Category 5")); + // ... other expectations ... + + EXPECT_EQ("good", MyProductionFunction(&foo)); // #5 +} // #6 +``` + +# Setting Default Actions # + +Google Mock has a **built-in default action** for any function that +returns `void`, `bool`, a numeric value, or a pointer. + +To customize the default action for functions with return type `T` globally: +``` +using ::testing::DefaultValue; + +// Sets the default value to be returned. T must be CopyConstructible. +DefaultValue::Set(value); +// Sets a factory. Will be invoked on demand. T must be MoveConstructible. +// T MakeT(); +DefaultValue::SetFactory(&MakeT); +// ... use the mocks ... +// Resets the default value. +DefaultValue::Clear(); +``` + +To customize the default action for a particular method, use `ON_CALL()`: +``` +ON_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .WillByDefault(action); +``` + +# Setting Expectations # + +`EXPECT_CALL()` sets **expectations** on a mock method (How will it be +called? What will it do?): +``` +EXPECT_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .Times(cardinality) ? + .InSequence(sequences) * + .After(expectations) * + .WillOnce(action) * + .WillRepeatedly(action) ? + .RetiresOnSaturation(); ? +``` + +If `Times()` is omitted, the cardinality is assumed to be: + + * `Times(1)` when there is neither `WillOnce()` nor `WillRepeatedly()`; + * `Times(n)` when there are `n WillOnce()`s but no `WillRepeatedly()`, where `n` >= 1; or + * `Times(AtLeast(n))` when there are `n WillOnce()`s and a `WillRepeatedly()`, where `n` >= 0. + +A method with no `EXPECT_CALL()` is free to be invoked _any number of times_, and the default action will be taken each time. + +# Matchers # + +A **matcher** matches a _single_ argument. You can use it inside +`ON_CALL()` or `EXPECT_CALL()`, or use it to validate a value +directly: + +| `EXPECT_THAT(value, matcher)` | Asserts that `value` matches `matcher`. | +|:------------------------------|:----------------------------------------| +| `ASSERT_THAT(value, matcher)` | The same as `EXPECT_THAT(value, matcher)`, except that it generates a **fatal** failure. | + +Built-in matchers (where `argument` is the function argument) are +divided into several categories: + +## Wildcard ## +|`_`|`argument` can be any value of the correct type.| +|:--|:-----------------------------------------------| +|`A()` or `An()`|`argument` can be any value of type `type`. | + +## Generic Comparison ## + +|`Eq(value)` or `value`|`argument == value`| +|:---------------------|:------------------| +|`Ge(value)` |`argument >= value`| +|`Gt(value)` |`argument > value` | +|`Le(value)` |`argument <= value`| +|`Lt(value)` |`argument < value` | +|`Ne(value)` |`argument != value`| +|`IsNull()` |`argument` is a `NULL` pointer (raw or smart).| +|`NotNull()` |`argument` is a non-null pointer (raw or smart).| +|`Ref(variable)` |`argument` is a reference to `variable`.| +|`TypedEq(value)`|`argument` has type `type` and is equal to `value`. You may need to use this instead of `Eq(value)` when the mock function is overloaded.| + +Except `Ref()`, these matchers make a _copy_ of `value` in case it's +modified or destructed later. If the compiler complains that `value` +doesn't have a public copy constructor, try wrap it in `ByRef()`, +e.g. `Eq(ByRef(non_copyable_value))`. If you do that, make sure +`non_copyable_value` is not changed afterwards, or the meaning of your +matcher will be changed. + +## Floating-Point Matchers ## + +|`DoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as unequal.| +|:-------------------|:----------------------------------------------------------------------------------------------| +|`FloatEq(a_float)` |`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as unequal. | +|`NanSensitiveDoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as equal. | +|`NanSensitiveFloatEq(a_float)`|`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as equal. | + +The above matchers use ULP-based comparison (the same as used in +[Google Test](../../googletest/)). They +automatically pick a reasonable error bound based on the absolute +value of the expected value. `DoubleEq()` and `FloatEq()` conform to +the IEEE standard, which requires comparing two NaNs for equality to +return false. The `NanSensitive*` version instead treats two NaNs as +equal, which is often what a user wants. + +|`DoubleNear(a_double, max_abs_error)`|`argument` is a `double` value close to `a_double` (absolute error <= `max_abs_error`), treating two NaNs as unequal.| +|:------------------------------------|:--------------------------------------------------------------------------------------------------------------------| +|`FloatNear(a_float, max_abs_error)` |`argument` is a `float` value close to `a_float` (absolute error <= `max_abs_error`), treating two NaNs as unequal. | +|`NanSensitiveDoubleNear(a_double, max_abs_error)`|`argument` is a `double` value close to `a_double` (absolute error <= `max_abs_error`), treating two NaNs as equal. | +|`NanSensitiveFloatNear(a_float, max_abs_error)`|`argument` is a `float` value close to `a_float` (absolute error <= `max_abs_error`), treating two NaNs as equal. | + +## String Matchers ## + +The `argument` can be either a C string or a C++ string object: + +|`ContainsRegex(string)`|`argument` matches the given regular expression.| +|:----------------------|:-----------------------------------------------| +|`EndsWith(suffix)` |`argument` ends with string `suffix`. | +|`HasSubstr(string)` |`argument` contains `string` as a sub-string. | +|`MatchesRegex(string)` |`argument` matches the given regular expression with the match starting at the first character and ending at the last character.| +|`StartsWith(prefix)` |`argument` starts with string `prefix`. | +|`StrCaseEq(string)` |`argument` is equal to `string`, ignoring case. | +|`StrCaseNe(string)` |`argument` is not equal to `string`, ignoring case.| +|`StrEq(string)` |`argument` is equal to `string`. | +|`StrNe(string)` |`argument` is not equal to `string`. | + +`ContainsRegex()` and `MatchesRegex()` use the regular expression +syntax defined +[here](../../googletest/docs/AdvancedGuide.md#regular-expression-syntax). +`StrCaseEq()`, `StrCaseNe()`, `StrEq()`, and `StrNe()` work for wide +strings as well. + +## Container Matchers ## + +Most STL-style containers support `==`, so you can use +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. If you want to write the elements in-line, +match them more flexibly, or get more informative messages, you can use: + +| `ContainerEq(container)` | The same as `Eq(container)` except that the failure message also includes which elements are in one container but not the other. | +|:-------------------------|:---------------------------------------------------------------------------------------------------------------------------------| +| `Contains(e)` | `argument` contains an element that matches `e`, which can be either a value or a matcher. | +| `Each(e)` | `argument` is a container where _every_ element matches `e`, which can be either a value or a matcher. | +| `ElementsAre(e0, e1, ..., en)` | `argument` has `n + 1` elements, where the i-th element matches `ei`, which can be a value or a matcher. 0 to 10 arguments are allowed. | +| `ElementsAreArray({ e0, e1, ..., en })`, `ElementsAreArray(array)`, or `ElementsAreArray(array, count)` | The same as `ElementsAre()` except that the expected element values/matchers come from an initializer list, STL-style container, or C-style array. | +| `IsEmpty()` | `argument` is an empty container (`container.empty()`). | +| `Pointwise(m, container)` | `argument` contains the same number of elements as in `container`, and for all i, (the i-th element in `argument`, the i-th element in `container`) match `m`, which is a matcher on 2-tuples. E.g. `Pointwise(Le(), upper_bounds)` verifies that each element in `argument` doesn't exceed the corresponding element in `upper_bounds`. See more detail below. | +| `SizeIs(m)` | `argument` is a container whose size matches `m`. E.g. `SizeIs(2)` or `SizeIs(Lt(2))`. | +| `UnorderedElementsAre(e0, e1, ..., en)` | `argument` has `n + 1` elements, and under some permutation each element matches an `ei` (for a different `i`), which can be a value or a matcher. 0 to 10 arguments are allowed. | +| `UnorderedElementsAreArray({ e0, e1, ..., en })`, `UnorderedElementsAreArray(array)`, or `UnorderedElementsAreArray(array, count)` | The same as `UnorderedElementsAre()` except that the expected element values/matchers come from an initializer list, STL-style container, or C-style array. | +| `WhenSorted(m)` | When `argument` is sorted using the `<` operator, it matches container matcher `m`. E.g. `WhenSorted(UnorderedElementsAre(1, 2, 3))` verifies that `argument` contains elements `1`, `2`, and `3`, ignoring order. | +| `WhenSortedBy(comparator, m)` | The same as `WhenSorted(m)`, except that the given comparator instead of `<` is used to sort `argument`. E.g. `WhenSortedBy(std::greater(), ElementsAre(3, 2, 1))`. | + +Notes: + + * These matchers can also match: + 1. a native array passed by reference (e.g. in `Foo(const int (&a)[5])`), and + 1. an array passed as a pointer and a count (e.g. in `Bar(const T* buffer, int len)` -- see [Multi-argument Matchers](#Multiargument_Matchers.md)). + * The array being matched may be multi-dimensional (i.e. its elements can be arrays). + * `m` in `Pointwise(m, ...)` should be a matcher for `::testing::tuple` where `T` and `U` are the element type of the actual container and the expected container, respectively. For example, to compare two `Foo` containers where `Foo` doesn't support `operator==` but has an `Equals()` method, one might write: + +``` +using ::testing::get; +MATCHER(FooEq, "") { + return get<0>(arg).Equals(get<1>(arg)); +} +... +EXPECT_THAT(actual_foos, Pointwise(FooEq(), expected_foos)); +``` + +## Member Matchers ## + +|`Field(&class::field, m)`|`argument.field` (or `argument->field` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| +|:------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------| +|`Key(e)` |`argument.first` matches `e`, which can be either a value or a matcher. E.g. `Contains(Key(Le(5)))` can verify that a `map` contains a key `<= 5`.| +|`Pair(m1, m2)` |`argument` is an `std::pair` whose `first` field matches `m1` and `second` field matches `m2`. | +|`Property(&class::property, m)`|`argument.property()` (or `argument->property()` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| + +## Matching the Result of a Function or Functor ## + +|`ResultOf(f, m)`|`f(argument)` matches matcher `m`, where `f` is a function or functor.| +|:---------------|:---------------------------------------------------------------------| + +## Pointer Matchers ## + +|`Pointee(m)`|`argument` (either a smart pointer or a raw pointer) points to a value that matches matcher `m`.| +|:-----------|:-----------------------------------------------------------------------------------------------| +|`WhenDynamicCastTo(m)`| when `argument` is passed through `dynamic_cast()`, it matches matcher `m`. | + +## Multiargument Matchers ## + +Technically, all matchers match a _single_ value. A "multi-argument" +matcher is just one that matches a _tuple_. The following matchers can +be used to match a tuple `(x, y)`: + +|`Eq()`|`x == y`| +|:-----|:-------| +|`Ge()`|`x >= y`| +|`Gt()`|`x > y` | +|`Le()`|`x <= y`| +|`Lt()`|`x < y` | +|`Ne()`|`x != y`| + +You can use the following selectors to pick a subset of the arguments +(or reorder them) to participate in the matching: + +|`AllArgs(m)`|Equivalent to `m`. Useful as syntactic sugar in `.With(AllArgs(m))`.| +|:-----------|:-------------------------------------------------------------------| +|`Args(m)`|The tuple of the `k` selected (using 0-based indices) arguments matches `m`, e.g. `Args<1, 2>(Eq())`.| + +## Composite Matchers ## + +You can make a matcher from one or more other matchers: + +|`AllOf(m1, m2, ..., mn)`|`argument` matches all of the matchers `m1` to `mn`.| +|:-----------------------|:---------------------------------------------------| +|`AnyOf(m1, m2, ..., mn)`|`argument` matches at least one of the matchers `m1` to `mn`.| +|`Not(m)` |`argument` doesn't match matcher `m`. | + +## Adapters for Matchers ## + +|`MatcherCast(m)`|casts matcher `m` to type `Matcher`.| +|:------------------|:--------------------------------------| +|`SafeMatcherCast(m)`| [safely casts](CookBook.md#casting-matchers) matcher `m` to type `Matcher`. | +|`Truly(predicate)` |`predicate(argument)` returns something considered by C++ to be true, where `predicate` is a function or functor.| + +## Matchers as Predicates ## + +|`Matches(m)(value)`|evaluates to `true` if `value` matches `m`. You can use `Matches(m)` alone as a unary functor.| +|:------------------|:---------------------------------------------------------------------------------------------| +|`ExplainMatchResult(m, value, result_listener)`|evaluates to `true` if `value` matches `m`, explaining the result to `result_listener`. | +|`Value(value, m)` |evaluates to `true` if `value` matches `m`. | + +## Defining Matchers ## + +| `MATCHER(IsEven, "") { return (arg % 2) == 0; }` | Defines a matcher `IsEven()` to match an even number. | +|:-------------------------------------------------|:------------------------------------------------------| +| `MATCHER_P(IsDivisibleBy, n, "") { *result_listener << "where the remainder is " << (arg % n); return (arg % n) == 0; }` | Defines a macher `IsDivisibleBy(n)` to match a number divisible by `n`. | +| `MATCHER_P2(IsBetween, a, b, std::string(negation ? "isn't" : "is") + " between " + PrintToString(a) + " and " + PrintToString(b)) { return a <= arg && arg <= b; }` | Defines a matcher `IsBetween(a, b)` to match a value in the range [`a`, `b`]. | + +**Notes:** + + 1. The `MATCHER*` macros cannot be used inside a function or class. + 1. The matcher body must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). + 1. You can use `PrintToString(x)` to convert a value `x` of any type to a string. + +## Matchers as Test Assertions ## + +|`ASSERT_THAT(expression, m)`|Generates a [fatal failure](../../googletest/docs/Primer.md#assertions) if the value of `expression` doesn't match matcher `m`.| +|:---------------------------|:----------------------------------------------------------------------------------------------------------------------------------------------| +|`EXPECT_THAT(expression, m)`|Generates a non-fatal failure if the value of `expression` doesn't match matcher `m`. | + +# Actions # + +**Actions** specify what a mock function should do when invoked. + +## Returning a Value ## + +|`Return()`|Return from a `void` mock function.| +|:---------|:----------------------------------| +|`Return(value)`|Return `value`. If the type of `value` is different to the mock function's return type, `value` is converted to the latter type at the time the expectation is set, not when the action is executed.| +|`ReturnArg()`|Return the `N`-th (0-based) argument.| +|`ReturnNew(a1, ..., ak)`|Return `new T(a1, ..., ak)`; a different object is created each time.| +|`ReturnNull()`|Return a null pointer. | +|`ReturnPointee(ptr)`|Return the value pointed to by `ptr`.| +|`ReturnRef(variable)`|Return a reference to `variable`. | +|`ReturnRefOfCopy(value)`|Return a reference to a copy of `value`; the copy lives as long as the action.| + +## Side Effects ## + +|`Assign(&variable, value)`|Assign `value` to variable.| +|:-------------------------|:--------------------------| +| `DeleteArg()` | Delete the `N`-th (0-based) argument, which must be a pointer. | +| `SaveArg(pointer)` | Save the `N`-th (0-based) argument to `*pointer`. | +| `SaveArgPointee(pointer)` | Save the value pointed to by the `N`-th (0-based) argument to `*pointer`. | +| `SetArgReferee(value)` | Assign value to the variable referenced by the `N`-th (0-based) argument. | +|`SetArgPointee(value)` |Assign `value` to the variable pointed by the `N`-th (0-based) argument.| +|`SetArgumentPointee(value)`|Same as `SetArgPointee(value)`. Deprecated. Will be removed in v1.7.0.| +|`SetArrayArgument(first, last)`|Copies the elements in source range [`first`, `last`) to the array pointed to by the `N`-th (0-based) argument, which can be either a pointer or an iterator. The action does not take ownership of the elements in the source range.| +|`SetErrnoAndReturn(error, value)`|Set `errno` to `error` and return `value`.| +|`Throw(exception)` |Throws the given exception, which can be any copyable value. Available since v1.1.0.| + +## Using a Function or a Functor as an Action ## + +|`Invoke(f)`|Invoke `f` with the arguments passed to the mock function, where `f` can be a global/static function or a functor.| +|:----------|:-----------------------------------------------------------------------------------------------------------------| +|`Invoke(object_pointer, &class::method)`|Invoke the {method on the object with the arguments passed to the mock function. | +|`InvokeWithoutArgs(f)`|Invoke `f`, which can be a global/static function or a functor. `f` must take no arguments. | +|`InvokeWithoutArgs(object_pointer, &class::method)`|Invoke the method on the object, which takes no arguments. | +|`InvokeArgument(arg1, arg2, ..., argk)`|Invoke the mock function's `N`-th (0-based) argument, which must be a function or a functor, with the `k` arguments.| + +The return value of the invoked function is used as the return value +of the action. + +When defining a function or functor to be used with `Invoke*()`, you can declare any unused parameters as `Unused`: +``` + double Distance(Unused, double x, double y) { return sqrt(x*x + y*y); } + ... + EXPECT_CALL(mock, Foo("Hi", _, _)).WillOnce(Invoke(Distance)); +``` + +In `InvokeArgument(...)`, if an argument needs to be passed by reference, wrap it inside `ByRef()`. For example, +``` + InvokeArgument<2>(5, string("Hi"), ByRef(foo)) +``` +calls the mock function's #2 argument, passing to it `5` and `string("Hi")` by value, and `foo` by reference. + +## Default Action ## + +|`DoDefault()`|Do the default action (specified by `ON_CALL()` or the built-in one).| +|:------------|:--------------------------------------------------------------------| + +**Note:** due to technical reasons, `DoDefault()` cannot be used inside a composite action - trying to do so will result in a run-time error. + +## Composite Actions ## + +|`DoAll(a1, a2, ..., an)`|Do all actions `a1` to `an` and return the result of `an` in each invocation. The first `n - 1` sub-actions must return void. | +|:-----------------------|:-----------------------------------------------------------------------------------------------------------------------------| +|`IgnoreResult(a)` |Perform action `a` and ignore its result. `a` must not return void. | +|`WithArg(a)` |Pass the `N`-th (0-based) argument of the mock function to action `a` and perform it. | +|`WithArgs(a)`|Pass the selected (0-based) arguments of the mock function to action `a` and perform it. | +|`WithoutArgs(a)` |Perform action `a` without any arguments. | + +## Defining Actions ## + +| `ACTION(Sum) { return arg0 + arg1; }` | Defines an action `Sum()` to return the sum of the mock function's argument #0 and #1. | +|:--------------------------------------|:---------------------------------------------------------------------------------------| +| `ACTION_P(Plus, n) { return arg0 + n; }` | Defines an action `Plus(n)` to return the sum of the mock function's argument #0 and `n`. | +| `ACTION_Pk(Foo, p1, ..., pk) { statements; }` | Defines a parameterized action `Foo(p1, ..., pk)` to execute the given `statements`. | + +The `ACTION*` macros cannot be used inside a function or class. + +# Cardinalities # + +These are used in `Times()` to specify how many times a mock function will be called: + +|`AnyNumber()`|The function can be called any number of times.| +|:------------|:----------------------------------------------| +|`AtLeast(n)` |The call is expected at least `n` times. | +|`AtMost(n)` |The call is expected at most `n` times. | +|`Between(m, n)`|The call is expected between `m` and `n` (inclusive) times.| +|`Exactly(n) or n`|The call is expected exactly `n` times. In particular, the call should never happen when `n` is 0.| + +# Expectation Order # + +By default, the expectations can be matched in _any_ order. If some +or all expectations must be matched in a given order, there are two +ways to specify it. They can be used either independently or +together. + +## The After Clause ## + +``` +using ::testing::Expectation; +... +Expectation init_x = EXPECT_CALL(foo, InitX()); +Expectation init_y = EXPECT_CALL(foo, InitY()); +EXPECT_CALL(foo, Bar()) + .After(init_x, init_y); +``` +says that `Bar()` can be called only after both `InitX()` and +`InitY()` have been called. + +If you don't know how many pre-requisites an expectation has when you +write it, you can use an `ExpectationSet` to collect them: + +``` +using ::testing::ExpectationSet; +... +ExpectationSet all_inits; +for (int i = 0; i < element_count; i++) { + all_inits += EXPECT_CALL(foo, InitElement(i)); +} +EXPECT_CALL(foo, Bar()) + .After(all_inits); +``` +says that `Bar()` can be called only after all elements have been +initialized (but we don't care about which elements get initialized +before the others). + +Modifying an `ExpectationSet` after using it in an `.After()` doesn't +affect the meaning of the `.After()`. + +## Sequences ## + +When you have a long chain of sequential expectations, it's easier to +specify the order using **sequences**, which don't require you to given +each expectation in the chain a different name. All expected
+calls in the same sequence must occur in the order they are +specified. + +``` +using ::testing::Sequence; +Sequence s1, s2; +... +EXPECT_CALL(foo, Reset()) + .InSequence(s1, s2) + .WillOnce(Return(true)); +EXPECT_CALL(foo, GetSize()) + .InSequence(s1) + .WillOnce(Return(1)); +EXPECT_CALL(foo, Describe(A())) + .InSequence(s2) + .WillOnce(Return("dummy")); +``` +says that `Reset()` must be called before _both_ `GetSize()` _and_ +`Describe()`, and the latter two can occur in any order. + +To put many expectations in a sequence conveniently: +``` +using ::testing::InSequence; +{ + InSequence dummy; + + EXPECT_CALL(...)...; + EXPECT_CALL(...)...; + ... + EXPECT_CALL(...)...; +} +``` +says that all expected calls in the scope of `dummy` must occur in +strict order. The name `dummy` is irrelevant.) + +# Verifying and Resetting a Mock # + +Google Mock will verify the expectations on a mock object when it is destructed, or you can do it earlier: +``` +using ::testing::Mock; +... +// Verifies and removes the expectations on mock_obj; +// returns true iff successful. +Mock::VerifyAndClearExpectations(&mock_obj); +... +// Verifies and removes the expectations on mock_obj; +// also removes the default actions set by ON_CALL(); +// returns true iff successful. +Mock::VerifyAndClear(&mock_obj); +``` + +You can also tell Google Mock that a mock object can be leaked and doesn't +need to be verified: +``` +Mock::AllowLeak(&mock_obj); +``` + +# Mock Classes # + +Google Mock defines a convenient mock class template +``` +class MockFunction { + public: + MOCK_METHODn(Call, R(A1, ..., An)); +}; +``` +See this [recipe](CookBook.md#using-check-points) for one application of it. + +# Flags # + +| `--gmock_catch_leaked_mocks=0` | Don't report leaked mock objects as failures. | +|:-------------------------------|:----------------------------------------------| +| `--gmock_verbose=LEVEL` | Sets the default verbosity level (`info`, `warning`, or `error`) of Google Mock messages. | diff --git a/googlemock/docs/CookBook.md b/googlemock/docs/CookBook.md new file mode 100644 index 0000000..c52f100 --- /dev/null +++ b/googlemock/docs/CookBook.md @@ -0,0 +1,3675 @@ + + +You can find recipes for using Google Mock here. If you haven't yet, +please read the [ForDummies](ForDummies.md) document first to make sure you understand +the basics. + +**Note:** Google Mock lives in the `testing` name space. For +readability, it is recommended to write `using ::testing::Foo;` once in +your file before using the name `Foo` defined by Google Mock. We omit +such `using` statements in this page for brevity, but you should do it +in your own code. + +# Creating Mock Classes # + +## Mocking Private or Protected Methods ## + +You must always put a mock method definition (`MOCK_METHOD*`) in a +`public:` section of the mock class, regardless of the method being +mocked being `public`, `protected`, or `private` in the base class. +This allows `ON_CALL` and `EXPECT_CALL` to reference the mock function +from outside of the mock class. (Yes, C++ allows a subclass to change +the access level of a virtual function in the base class.) Example: + +``` +class Foo { + public: + ... + virtual bool Transform(Gadget* g) = 0; + + protected: + virtual void Resume(); + + private: + virtual int GetTimeOut(); +}; + +class MockFoo : public Foo { + public: + ... + MOCK_METHOD1(Transform, bool(Gadget* g)); + + // The following must be in the public section, even though the + // methods are protected or private in the base class. + MOCK_METHOD0(Resume, void()); + MOCK_METHOD0(GetTimeOut, int()); +}; +``` + +## Mocking Overloaded Methods ## + +You can mock overloaded functions as usual. No special attention is required: + +``` +class Foo { + ... + + // Must be virtual as we'll inherit from Foo. + virtual ~Foo(); + + // Overloaded on the types and/or numbers of arguments. + virtual int Add(Element x); + virtual int Add(int times, Element x); + + // Overloaded on the const-ness of this object. + virtual Bar& GetBar(); + virtual const Bar& GetBar() const; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Add, int(Element x)); + MOCK_METHOD2(Add, int(int times, Element x); + + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +``` + +**Note:** if you don't mock all versions of the overloaded method, the +compiler will give you a warning about some methods in the base class +being hidden. To fix that, use `using` to bring them in scope: + +``` +class MockFoo : public Foo { + ... + using Foo::Add; + MOCK_METHOD1(Add, int(Element x)); + // We don't want to mock int Add(int times, Element x); + ... +}; +``` + +## Mocking Class Templates ## + +To mock a class template, append `_T` to the `MOCK_*` macros: + +``` +template +class StackInterface { + ... + // Must be virtual as we'll inherit from StackInterface. + virtual ~StackInterface(); + + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; + +template +class MockStack : public StackInterface { + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Mocking Nonvirtual Methods ## + +Google Mock can mock non-virtual functions to be used in what we call _hi-perf +dependency injection_. + +In this case, instead of sharing a common base class with the real +class, your mock class will be _unrelated_ to the real class, but +contain methods with the same signatures. The syntax for mocking +non-virtual methods is the _same_ as mocking virtual methods: + +``` +// A simple packet stream class. None of its members is virtual. +class ConcretePacketStream { + public: + void AppendPacket(Packet* new_packet); + const Packet* GetPacket(size_t packet_number) const; + size_t NumberOfPackets() const; + ... +}; + +// A mock packet stream class. It inherits from no other, but defines +// GetPacket() and NumberOfPackets(). +class MockPacketStream { + public: + MOCK_CONST_METHOD1(GetPacket, const Packet*(size_t packet_number)); + MOCK_CONST_METHOD0(NumberOfPackets, size_t()); + ... +}; +``` + +Note that the mock class doesn't define `AppendPacket()`, unlike the +real class. That's fine as long as the test doesn't need to call it. + +Next, you need a way to say that you want to use +`ConcretePacketStream` in production code, and use `MockPacketStream` +in tests. Since the functions are not virtual and the two classes are +unrelated, you must specify your choice at _compile time_ (as opposed +to run time). + +One way to do it is to templatize your code that needs to use a packet +stream. More specifically, you will give your code a template type +argument for the type of the packet stream. In production, you will +instantiate your template with `ConcretePacketStream` as the type +argument. In tests, you will instantiate the same template with +`MockPacketStream`. For example, you may write: + +``` +template +void CreateConnection(PacketStream* stream) { ... } + +template +class PacketReader { + public: + void ReadPackets(PacketStream* stream, size_t packet_num); +}; +``` + +Then you can use `CreateConnection()` and +`PacketReader` in production code, and use +`CreateConnection()` and +`PacketReader` in tests. + +``` + MockPacketStream mock_stream; + EXPECT_CALL(mock_stream, ...)...; + .. set more expectations on mock_stream ... + PacketReader reader(&mock_stream); + ... exercise reader ... +``` + +## Mocking Free Functions ## + +It's possible to use Google Mock to mock a free function (i.e. a +C-style function or a static method). You just need to rewrite your +code to use an interface (abstract class). + +Instead of calling a free function (say, `OpenFile`) directly, +introduce an interface for it and have a concrete subclass that calls +the free function: + +``` +class FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) = 0; +}; + +class File : public FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) { + return OpenFile(path, mode); + } +}; +``` + +Your code should talk to `FileInterface` to open a file. Now it's +easy to mock out the function. + +This may seem much hassle, but in practice you often have multiple +related functions that you can put in the same interface, so the +per-function syntactic overhead will be much lower. + +If you are concerned about the performance overhead incurred by +virtual functions, and profiling confirms your concern, you can +combine this with the recipe for [mocking non-virtual methods](#Mocking_Nonvirtual_Methods.md). + +## The Nice, the Strict, and the Naggy ## + +If a mock method has no `EXPECT_CALL` spec but is called, Google Mock +will print a warning about the "uninteresting call". The rationale is: + + * New methods may be added to an interface after a test is written. We shouldn't fail a test just because a method it doesn't know about is called. + * However, this may also mean there's a bug in the test, so Google Mock shouldn't be silent either. If the user believes these calls are harmless, he can add an `EXPECT_CALL()` to suppress the warning. + +However, sometimes you may want to suppress all "uninteresting call" +warnings, while sometimes you may want the opposite, i.e. to treat all +of them as errors. Google Mock lets you make the decision on a +per-mock-object basis. + +Suppose your test uses a mock class `MockFoo`: + +``` +TEST(...) { + MockFoo mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +If a method of `mock_foo` other than `DoThis()` is called, it will be +reported by Google Mock as a warning. However, if you rewrite your +test to use `NiceMock` instead, the warning will be gone, +resulting in a cleaner test output: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +`NiceMock` is a subclass of `MockFoo`, so it can be used +wherever `MockFoo` is accepted. + +It also works if `MockFoo`'s constructor takes some arguments, as +`NiceMock` "inherits" `MockFoo`'s constructors: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo(5, "hi"); // Calls MockFoo(5, "hi"). + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +The usage of `StrictMock` is similar, except that it makes all +uninteresting calls failures: + +``` +using ::testing::StrictMock; + +TEST(...) { + StrictMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... + + // The test will fail if a method of mock_foo other than DoThis() + // is called. +} +``` + +There are some caveats though (I don't like them just as much as the +next guy, but sadly they are side effects of C++'s limitations): + + 1. `NiceMock` and `StrictMock` only work for mock methods defined using the `MOCK_METHOD*` family of macros **directly** in the `MockFoo` class. If a mock method is defined in a **base class** of `MockFoo`, the "nice" or "strict" modifier may not affect it, depending on the compiler. In particular, nesting `NiceMock` and `StrictMock` (e.g. `NiceMock >`) is **not** supported. + 1. The constructors of the base mock (`MockFoo`) cannot have arguments passed by non-const reference, which happens to be banned by the [Google C++ style guide](http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml). + 1. During the constructor or destructor of `MockFoo`, the mock object is _not_ nice or strict. This may cause surprises if the constructor or destructor calls a mock method on `this` object. (This behavior, however, is consistent with C++'s general rule: if a constructor or destructor calls a virtual method of `this` object, that method is treated as non-virtual. In other words, to the base class's constructor or destructor, `this` object behaves like an instance of the base class, not the derived class. This rule is required for safety. Otherwise a base constructor may use members of a derived class before they are initialized, or a base destructor may use members of a derived class after they have been destroyed.) + +Finally, you should be **very cautious** about when to use naggy or strict mocks, as they tend to make tests more brittle and harder to maintain. When you refactor your code without changing its externally visible behavior, ideally you should't need to update any tests. If your code interacts with a naggy mock, however, you may start to get spammed with warnings as the result of your change. Worse, if your code interacts with a strict mock, your tests may start to fail and you'll be forced to fix them. Our general recommendation is to use nice mocks (not yet the default) most of the time, use naggy mocks (the current default) when developing or debugging tests, and use strict mocks only as the last resort. + +## Simplifying the Interface without Breaking Existing Code ## + +Sometimes a method has a long list of arguments that is mostly +uninteresting. For example, + +``` +class LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, + const struct tm* tm_time, + const char* message, size_t message_len) = 0; +}; +``` + +This method's argument list is lengthy and hard to work with (let's +say that the `message` argument is not even 0-terminated). If we mock +it as is, using the mock will be awkward. If, however, we try to +simplify this interface, we'll need to fix all clients depending on +it, which is often infeasible. + +The trick is to re-dispatch the method in the mock class: + +``` +class ScopedMockLog : public LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, const tm* tm_time, + const char* message, size_t message_len) { + // We are only interested in the log severity, full file name, and + // log message. + Log(severity, full_filename, std::string(message, message_len)); + } + + // Implements the mock method: + // + // void Log(LogSeverity severity, + // const string& file_path, + // const string& message); + MOCK_METHOD3(Log, void(LogSeverity severity, const string& file_path, + const string& message)); +}; +``` + +By defining a new mock method with a trimmed argument list, we make +the mock class much more user-friendly. + +## Alternative to Mocking Concrete Classes ## + +Often you may find yourself using classes that don't implement +interfaces. In order to test your code that uses such a class (let's +call it `Concrete`), you may be tempted to make the methods of +`Concrete` virtual and then mock it. + +Try not to do that. + +Making a non-virtual function virtual is a big decision. It creates an +extension point where subclasses can tweak your class' behavior. This +weakens your control on the class because now it's harder to maintain +the class' invariants. You should make a function virtual only when +there is a valid reason for a subclass to override it. + +Mocking concrete classes directly is problematic as it creates a tight +coupling between the class and the tests - any small change in the +class may invalidate your tests and make test maintenance a pain. + +To avoid such problems, many programmers have been practicing "coding +to interfaces": instead of talking to the `Concrete` class, your code +would define an interface and talk to it. Then you implement that +interface as an adaptor on top of `Concrete`. In tests, you can easily +mock that interface to observe how your code is doing. + +This technique incurs some overhead: + + * You pay the cost of virtual function calls (usually not a problem). + * There is more abstraction for the programmers to learn. + +However, it can also bring significant benefits in addition to better +testability: + + * `Concrete`'s API may not fit your problem domain very well, as you may not be the only client it tries to serve. By designing your own interface, you have a chance to tailor it to your need - you may add higher-level functionalities, rename stuff, etc instead of just trimming the class. This allows you to write your code (user of the interface) in a more natural way, which means it will be more readable, more maintainable, and you'll be more productive. + * If `Concrete`'s implementation ever has to change, you don't have to rewrite everywhere it is used. Instead, you can absorb the change in your implementation of the interface, and your other code and tests will be insulated from this change. + +Some people worry that if everyone is practicing this technique, they +will end up writing lots of redundant code. This concern is totally +understandable. However, there are two reasons why it may not be the +case: + + * Different projects may need to use `Concrete` in different ways, so the best interfaces for them will be different. Therefore, each of them will have its own domain-specific interface on top of `Concrete`, and they will not be the same code. + * If enough projects want to use the same interface, they can always share it, just like they have been sharing `Concrete`. You can check in the interface and the adaptor somewhere near `Concrete` (perhaps in a `contrib` sub-directory) and let many projects use it. + +You need to weigh the pros and cons carefully for your particular +problem, but I'd like to assure you that the Java community has been +practicing this for a long time and it's a proven effective technique +applicable in a wide variety of situations. :-) + +## Delegating Calls to a Fake ## + +Some times you have a non-trivial fake implementation of an +interface. For example: + +``` +class Foo { + public: + virtual ~Foo() {} + virtual char DoThis(int n) = 0; + virtual void DoThat(const char* s, int* p) = 0; +}; + +class FakeFoo : public Foo { + public: + virtual char DoThis(int n) { + return (n > 0) ? '+' : + (n < 0) ? '-' : '0'; + } + + virtual void DoThat(const char* s, int* p) { + *p = strlen(s); + } +}; +``` + +Now you want to mock this interface such that you can set expectations +on it. However, you also want to use `FakeFoo` for the default +behavior, as duplicating it in the mock object is, well, a lot of +work. + +When you define the mock class using Google Mock, you can have it +delegate its default action to a fake class you already have, using +this pattern: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + // Normal mock method definitions using Google Mock. + MOCK_METHOD1(DoThis, char(int n)); + MOCK_METHOD2(DoThat, void(const char* s, int* p)); + + // Delegates the default actions of the methods to a FakeFoo object. + // This must be called *before* the custom ON_CALL() statements. + void DelegateToFake() { + ON_CALL(*this, DoThis(_)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThis)); + ON_CALL(*this, DoThat(_, _)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThat)); + } + private: + FakeFoo fake_; // Keeps an instance of the fake in the mock. +}; +``` + +With that, you can use `MockFoo` in your tests as usual. Just remember +that if you don't explicitly set an action in an `ON_CALL()` or +`EXPECT_CALL()`, the fake will be called upon to do it: + +``` +using ::testing::_; + +TEST(AbcTest, Xyz) { + MockFoo foo; + foo.DelegateToFake(); // Enables the fake for delegation. + + // Put your ON_CALL(foo, ...)s here, if any. + + // No action specified, meaning to use the default action. + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(foo, DoThat(_, _)); + + int n = 0; + EXPECT_EQ('+', foo.DoThis(5)); // FakeFoo::DoThis() is invoked. + foo.DoThat("Hi", &n); // FakeFoo::DoThat() is invoked. + EXPECT_EQ(2, n); +} +``` + +**Some tips:** + + * If you want, you can still override the default action by providing your own `ON_CALL()` or using `.WillOnce()` / `.WillRepeatedly()` in `EXPECT_CALL()`. + * In `DelegateToFake()`, you only need to delegate the methods whose fake implementation you intend to use. + * The general technique discussed here works for overloaded methods, but you'll need to tell the compiler which version you mean. To disambiguate a mock function (the one you specify inside the parentheses of `ON_CALL()`), see the "Selecting Between Overloaded Functions" section on this page; to disambiguate a fake function (the one you place inside `Invoke()`), use a `static_cast` to specify the function's type. For instance, if class `Foo` has methods `char DoThis(int n)` and `bool DoThis(double x) const`, and you want to invoke the latter, you need to write `Invoke(&fake_, static_cast(&FakeFoo::DoThis))` instead of `Invoke(&fake_, &FakeFoo::DoThis)` (The strange-looking thing inside the angled brackets of `static_cast` is the type of a function pointer to the second `DoThis()` method.). + * Having to mix a mock and a fake is often a sign of something gone wrong. Perhaps you haven't got used to the interaction-based way of testing yet. Or perhaps your interface is taking on too many roles and should be split up. Therefore, **don't abuse this**. We would only recommend to do it as an intermediate step when you are refactoring your code. + +Regarding the tip on mixing a mock and a fake, here's an example on +why it may be a bad sign: Suppose you have a class `System` for +low-level system operations. In particular, it does file and I/O +operations. And suppose you want to test how your code uses `System` +to do I/O, and you just want the file operations to work normally. If +you mock out the entire `System` class, you'll have to provide a fake +implementation for the file operation part, which suggests that +`System` is taking on too many roles. + +Instead, you can define a `FileOps` interface and an `IOOps` interface +and split `System`'s functionalities into the two. Then you can mock +`IOOps` without mocking `FileOps`. + +## Delegating Calls to a Real Object ## + +When using testing doubles (mocks, fakes, stubs, and etc), sometimes +their behaviors will differ from those of the real objects. This +difference could be either intentional (as in simulating an error such +that you can test the error handling code) or unintentional. If your +mocks have different behaviors than the real objects by mistake, you +could end up with code that passes the tests but fails in production. + +You can use the _delegating-to-real_ technique to ensure that your +mock has the same behavior as the real object while retaining the +ability to validate calls. This technique is very similar to the +delegating-to-fake technique, the difference being that we use a real +object instead of a fake. Here's an example: + +``` +using ::testing::_; +using ::testing::AtLeast; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MockFoo() { + // By default, all calls are delegated to the real object. + ON_CALL(*this, DoThis()) + .WillByDefault(Invoke(&real_, &Foo::DoThis)); + ON_CALL(*this, DoThat(_)) + .WillByDefault(Invoke(&real_, &Foo::DoThat)); + ... + } + MOCK_METHOD0(DoThis, ...); + MOCK_METHOD1(DoThat, ...); + ... + private: + Foo real_; +}; +... + + MockFoo mock; + + EXPECT_CALL(mock, DoThis()) + .Times(3); + EXPECT_CALL(mock, DoThat("Hi")) + .Times(AtLeast(1)); + ... use mock in test ... +``` + +With this, Google Mock will verify that your code made the right calls +(with the right arguments, in the right order, called the right number +of times, etc), and a real object will answer the calls (so the +behavior will be the same as in production). This gives you the best +of both worlds. + +## Delegating Calls to a Parent Class ## + +Ideally, you should code to interfaces, whose methods are all pure +virtual. In reality, sometimes you do need to mock a virtual method +that is not pure (i.e, it already has an implementation). For example: + +``` +class Foo { + public: + virtual ~Foo(); + + virtual void Pure(int n) = 0; + virtual int Concrete(const char* str) { ... } +}; + +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); +}; +``` + +Sometimes you may want to call `Foo::Concrete()` instead of +`MockFoo::Concrete()`. Perhaps you want to do it as part of a stub +action, or perhaps your test doesn't need to mock `Concrete()` at all +(but it would be oh-so painful to have to define a new mock class +whenever you don't need to mock one of its methods). + +The trick is to leave a back door in your mock class for accessing the +real methods in the base class: + +``` +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); + + // Use this to call Concrete() defined in Foo. + int FooConcrete(const char* str) { return Foo::Concrete(str); } +}; +``` + +Now, you can call `Foo::Concrete()` inside an action by: + +``` +using ::testing::_; +using ::testing::Invoke; +... + EXPECT_CALL(foo, Concrete(_)) + .WillOnce(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +or tell the mock object that you don't want to mock `Concrete()`: + +``` +using ::testing::Invoke; +... + ON_CALL(foo, Concrete(_)) + .WillByDefault(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +(Why don't we just write `Invoke(&foo, &Foo::Concrete)`? If you do +that, `MockFoo::Concrete()` will be called (and cause an infinite +recursion) since `Foo::Concrete()` is virtual. That's just how C++ +works.) + +# Using Matchers # + +## Matching Argument Values Exactly ## + +You can specify exactly which arguments a mock method is expecting: + +``` +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(5)) + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", bar)); +``` + +## Using Simple Matchers ## + +You can use matchers to match arguments that have a certain property: + +``` +using ::testing::Ge; +using ::testing::NotNull; +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(Ge(5))) // The argument must be >= 5. + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", NotNull())); + // The second argument must not be NULL. +``` + +A frequently used matcher is `_`, which matches anything: + +``` +using ::testing::_; +using ::testing::NotNull; +... + EXPECT_CALL(foo, DoThat(_, NotNull())); +``` + +## Combining Matchers ## + +You can build complex matchers from existing ones using `AllOf()`, +`AnyOf()`, and `Not()`: + +``` +using ::testing::AllOf; +using ::testing::Gt; +using ::testing::HasSubstr; +using ::testing::Ne; +using ::testing::Not; +... + // The argument must be > 5 and != 10. + EXPECT_CALL(foo, DoThis(AllOf(Gt(5), + Ne(10)))); + + // The first argument must not contain sub-string "blah". + EXPECT_CALL(foo, DoThat(Not(HasSubstr("blah")), + NULL)); +``` + +## Casting Matchers ## + +Google Mock matchers are statically typed, meaning that the compiler +can catch your mistake if you use a matcher of the wrong type (for +example, if you use `Eq(5)` to match a `string` argument). Good for +you! + +Sometimes, however, you know what you're doing and want the compiler +to give you some slack. One example is that you have a matcher for +`long` and the argument you want to match is `int`. While the two +types aren't exactly the same, there is nothing really wrong with +using a `Matcher` to match an `int` - after all, we can first +convert the `int` argument to a `long` before giving it to the +matcher. + +To support this need, Google Mock gives you the +`SafeMatcherCast(m)` function. It casts a matcher `m` to type +`Matcher`. To ensure safety, Google Mock checks that (let `U` be the +type `m` accepts): + + 1. Type `T` can be implicitly cast to type `U`; + 1. When both `T` and `U` are built-in arithmetic types (`bool`, integers, and floating-point numbers), the conversion from `T` to `U` is not lossy (in other words, any value representable by `T` can also be represented by `U`); and + 1. When `U` is a reference, `T` must also be a reference (as the underlying matcher may be interested in the address of the `U` value). + +The code won't compile if any of these conditions isn't met. + +Here's one example: + +``` +using ::testing::SafeMatcherCast; + +// A base class and a child class. +class Base { ... }; +class Derived : public Base { ... }; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(DoThis, void(Derived* derived)); +}; +... + + MockFoo foo; + // m is a Matcher we got from somewhere. + EXPECT_CALL(foo, DoThis(SafeMatcherCast(m))); +``` + +If you find `SafeMatcherCast(m)` too limiting, you can use a similar +function `MatcherCast(m)`. The difference is that `MatcherCast` works +as long as you can `static_cast` type `T` to type `U`. + +`MatcherCast` essentially lets you bypass C++'s type system +(`static_cast` isn't always safe as it could throw away information, +for example), so be careful not to misuse/abuse it. + +## Selecting Between Overloaded Functions ## + +If you expect an overloaded function to be called, the compiler may +need some help on which overloaded version it is. + +To disambiguate functions overloaded on the const-ness of this object, +use the `Const()` argument wrapper. + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + ... + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +... + + MockFoo foo; + Bar bar1, bar2; + EXPECT_CALL(foo, GetBar()) // The non-const GetBar(). + .WillOnce(ReturnRef(bar1)); + EXPECT_CALL(Const(foo), GetBar()) // The const GetBar(). + .WillOnce(ReturnRef(bar2)); +``` + +(`Const()` is defined by Google Mock and returns a `const` reference +to its argument.) + +To disambiguate overloaded functions with the same number of arguments +but different argument types, you may need to specify the exact type +of a matcher, either by wrapping your matcher in `Matcher()`, or +using a matcher whose type is fixed (`TypedEq`, `An()`, +etc): + +``` +using ::testing::An; +using ::testing::Lt; +using ::testing::Matcher; +using ::testing::TypedEq; + +class MockPrinter : public Printer { + public: + MOCK_METHOD1(Print, void(int n)); + MOCK_METHOD1(Print, void(char c)); +}; + +TEST(PrinterTest, Print) { + MockPrinter printer; + + EXPECT_CALL(printer, Print(An())); // void Print(int); + EXPECT_CALL(printer, Print(Matcher(Lt(5)))); // void Print(int); + EXPECT_CALL(printer, Print(TypedEq('a'))); // void Print(char); + + printer.Print(3); + printer.Print(6); + printer.Print('a'); +} +``` + +## Performing Different Actions Based on the Arguments ## + +When a mock method is called, the _last_ matching expectation that's +still active will be selected (think "newer overrides older"). So, you +can make a method do different things depending on its argument values +like this: + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Return; +... + // The default case. + EXPECT_CALL(foo, DoThis(_)) + .WillRepeatedly(Return('b')); + + // The more specific case. + EXPECT_CALL(foo, DoThis(Lt(5))) + .WillRepeatedly(Return('a')); +``` + +Now, if `foo.DoThis()` is called with a value less than 5, `'a'` will +be returned; otherwise `'b'` will be returned. + +## Matching Multiple Arguments as a Whole ## + +Sometimes it's not enough to match the arguments individually. For +example, we may want to say that the first argument must be less than +the second argument. The `With()` clause allows us to match +all arguments of a mock function as a whole. For example, + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Ne; +... + EXPECT_CALL(foo, InRange(Ne(0), _)) + .With(Lt()); +``` + +says that the first argument of `InRange()` must not be 0, and must be +less than the second argument. + +The expression inside `With()` must be a matcher of type +`Matcher< ::testing::tuple >`, where `A1`, ..., `An` are the +types of the function arguments. + +You can also write `AllArgs(m)` instead of `m` inside `.With()`. The +two forms are equivalent, but `.With(AllArgs(Lt()))` is more readable +than `.With(Lt())`. + +You can use `Args(m)` to match the `n` selected arguments +(as a tuple) against `m`. For example, + +``` +using ::testing::_; +using ::testing::AllOf; +using ::testing::Args; +using ::testing::Lt; +... + EXPECT_CALL(foo, Blah(_, _, _)) + .With(AllOf(Args<0, 1>(Lt()), Args<1, 2>(Lt()))); +``` + +says that `Blah()` will be called with arguments `x`, `y`, and `z` where +`x < y < z`. + +As a convenience and example, Google Mock provides some matchers for +2-tuples, including the `Lt()` matcher above. See the [CheatSheet](CheatSheet.md) for +the complete list. + +Note that if you want to pass the arguments to a predicate of your own +(e.g. `.With(Args<0, 1>(Truly(&MyPredicate)))`), that predicate MUST be +written to take a `::testing::tuple` as its argument; Google Mock will pass the `n` selected arguments as _one_ single tuple to the predicate. + +## Using Matchers as Predicates ## + +Have you noticed that a matcher is just a fancy predicate that also +knows how to describe itself? Many existing algorithms take predicates +as arguments (e.g. those defined in STL's `` header), and +it would be a shame if Google Mock matchers are not allowed to +participate. + +Luckily, you can use a matcher where a unary predicate functor is +expected by wrapping it inside the `Matches()` function. For example, + +``` +#include +#include + +std::vector v; +... +// How many elements in v are >= 10? +const int count = count_if(v.begin(), v.end(), Matches(Ge(10))); +``` + +Since you can build complex matchers from simpler ones easily using +Google Mock, this gives you a way to conveniently construct composite +predicates (doing the same using STL's `` header is just +painful). For example, here's a predicate that's satisfied by any +number that is >= 0, <= 100, and != 50: + +``` +Matches(AllOf(Ge(0), Le(100), Ne(50))) +``` + +## Using Matchers in Google Test Assertions ## + +Since matchers are basically predicates that also know how to describe +themselves, there is a way to take advantage of them in +[Google Test](../../googletest/) assertions. It's +called `ASSERT_THAT` and `EXPECT_THAT`: + +``` + ASSERT_THAT(value, matcher); // Asserts that value matches matcher. + EXPECT_THAT(value, matcher); // The non-fatal version. +``` + +For example, in a Google Test test you can write: + +``` +#include "gmock/gmock.h" + +using ::testing::AllOf; +using ::testing::Ge; +using ::testing::Le; +using ::testing::MatchesRegex; +using ::testing::StartsWith; +... + + EXPECT_THAT(Foo(), StartsWith("Hello")); + EXPECT_THAT(Bar(), MatchesRegex("Line \\d+")); + ASSERT_THAT(Baz(), AllOf(Ge(5), Le(10))); +``` + +which (as you can probably guess) executes `Foo()`, `Bar()`, and +`Baz()`, and verifies that: + + * `Foo()` returns a string that starts with `"Hello"`. + * `Bar()` returns a string that matches regular expression `"Line \\d+"`. + * `Baz()` returns a number in the range [5, 10]. + +The nice thing about these macros is that _they read like +English_. They generate informative messages too. For example, if the +first `EXPECT_THAT()` above fails, the message will be something like: + +``` +Value of: Foo() + Actual: "Hi, world!" +Expected: starts with "Hello" +``` + +**Credit:** The idea of `(ASSERT|EXPECT)_THAT` was stolen from the +[Hamcrest](https://github.com/hamcrest/) project, which adds +`assertThat()` to JUnit. + +## Using Predicates as Matchers ## + +Google Mock provides a built-in set of matchers. In case you find them +lacking, you can use an arbitray unary predicate function or functor +as a matcher - as long as the predicate accepts a value of the type +you want. You do this by wrapping the predicate inside the `Truly()` +function, for example: + +``` +using ::testing::Truly; + +int IsEven(int n) { return (n % 2) == 0 ? 1 : 0; } +... + + // Bar() must be called with an even number. + EXPECT_CALL(foo, Bar(Truly(IsEven))); +``` + +Note that the predicate function / functor doesn't have to return +`bool`. It works as long as the return value can be used as the +condition in statement `if (condition) ...`. + +## Matching Arguments that Are Not Copyable ## + +When you do an `EXPECT_CALL(mock_obj, Foo(bar))`, Google Mock saves +away a copy of `bar`. When `Foo()` is called later, Google Mock +compares the argument to `Foo()` with the saved copy of `bar`. This +way, you don't need to worry about `bar` being modified or destroyed +after the `EXPECT_CALL()` is executed. The same is true when you use +matchers like `Eq(bar)`, `Le(bar)`, and so on. + +But what if `bar` cannot be copied (i.e. has no copy constructor)? You +could define your own matcher function and use it with `Truly()`, as +the previous couple of recipes have shown. Or, you may be able to get +away from it if you can guarantee that `bar` won't be changed after +the `EXPECT_CALL()` is executed. Just tell Google Mock that it should +save a reference to `bar`, instead of a copy of it. Here's how: + +``` +using ::testing::Eq; +using ::testing::ByRef; +using ::testing::Lt; +... + // Expects that Foo()'s argument == bar. + EXPECT_CALL(mock_obj, Foo(Eq(ByRef(bar)))); + + // Expects that Foo()'s argument < bar. + EXPECT_CALL(mock_obj, Foo(Lt(ByRef(bar)))); +``` + +Remember: if you do this, don't change `bar` after the +`EXPECT_CALL()`, or the result is undefined. + +## Validating a Member of an Object ## + +Often a mock function takes a reference to object as an argument. When +matching the argument, you may not want to compare the entire object +against a fixed object, as that may be over-specification. Instead, +you may need to validate a certain member variable or the result of a +certain getter method of the object. You can do this with `Field()` +and `Property()`. More specifically, + +``` +Field(&Foo::bar, m) +``` + +is a matcher that matches a `Foo` object whose `bar` member variable +satisfies matcher `m`. + +``` +Property(&Foo::baz, m) +``` + +is a matcher that matches a `Foo` object whose `baz()` method returns +a value that satisfies matcher `m`. + +For example: + +> | `Field(&Foo::number, Ge(3))` | Matches `x` where `x.number >= 3`. | +|:-----------------------------|:-----------------------------------| +> | `Property(&Foo::name, StartsWith("John "))` | Matches `x` where `x.name()` starts with `"John "`. | + +Note that in `Property(&Foo::baz, ...)`, method `baz()` must take no +argument and be declared as `const`. + +BTW, `Field()` and `Property()` can also match plain pointers to +objects. For instance, + +``` +Field(&Foo::number, Ge(3)) +``` + +matches a plain pointer `p` where `p->number >= 3`. If `p` is `NULL`, +the match will always fail regardless of the inner matcher. + +What if you want to validate more than one members at the same time? +Remember that there is `AllOf()`. + +## Validating the Value Pointed to by a Pointer Argument ## + +C++ functions often take pointers as arguments. You can use matchers +like `IsNull()`, `NotNull()`, and other comparison matchers to match a +pointer, but what if you want to make sure the value _pointed to_ by +the pointer, instead of the pointer itself, has a certain property? +Well, you can use the `Pointee(m)` matcher. + +`Pointee(m)` matches a pointer iff `m` matches the value the pointer +points to. For example: + +``` +using ::testing::Ge; +using ::testing::Pointee; +... + EXPECT_CALL(foo, Bar(Pointee(Ge(3)))); +``` + +expects `foo.Bar()` to be called with a pointer that points to a value +greater than or equal to 3. + +One nice thing about `Pointee()` is that it treats a `NULL` pointer as +a match failure, so you can write `Pointee(m)` instead of + +``` + AllOf(NotNull(), Pointee(m)) +``` + +without worrying that a `NULL` pointer will crash your test. + +Also, did we tell you that `Pointee()` works with both raw pointers +**and** smart pointers (`linked_ptr`, `shared_ptr`, `scoped_ptr`, and +etc)? + +What if you have a pointer to pointer? You guessed it - you can use +nested `Pointee()` to probe deeper inside the value. For example, +`Pointee(Pointee(Lt(3)))` matches a pointer that points to a pointer +that points to a number less than 3 (what a mouthful...). + +## Testing a Certain Property of an Object ## + +Sometimes you want to specify that an object argument has a certain +property, but there is no existing matcher that does this. If you want +good error messages, you should define a matcher. If you want to do it +quick and dirty, you could get away with writing an ordinary function. + +Let's say you have a mock function that takes an object of type `Foo`, +which has an `int bar()` method and an `int baz()` method, and you +want to constrain that the argument's `bar()` value plus its `baz()` +value is a given number. Here's how you can define a matcher to do it: + +``` +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class BarPlusBazEqMatcher : public MatcherInterface { + public: + explicit BarPlusBazEqMatcher(int expected_sum) + : expected_sum_(expected_sum) {} + + virtual bool MatchAndExplain(const Foo& foo, + MatchResultListener* listener) const { + return (foo.bar() + foo.baz()) == expected_sum_; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "bar() + baz() equals " << expected_sum_; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "bar() + baz() does not equal " << expected_sum_; + } + private: + const int expected_sum_; +}; + +inline Matcher BarPlusBazEq(int expected_sum) { + return MakeMatcher(new BarPlusBazEqMatcher(expected_sum)); +} + +... + + EXPECT_CALL(..., DoThis(BarPlusBazEq(5)))...; +``` + +## Matching Containers ## + +Sometimes an STL container (e.g. list, vector, map, ...) is passed to +a mock function and you may want to validate it. Since most STL +containers support the `==` operator, you can write +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. + +Sometimes, though, you may want to be more flexible (for example, the +first element must be an exact match, but the second element can be +any positive number, and so on). Also, containers used in tests often +have a small number of elements, and having to define the expected +container out-of-line is a bit of a hassle. + +You can use the `ElementsAre()` or `UnorderedElementsAre()` matcher in +such cases: + +``` +using ::testing::_; +using ::testing::ElementsAre; +using ::testing::Gt; +... + + MOCK_METHOD1(Foo, void(const vector& numbers)); +... + + EXPECT_CALL(mock, Foo(ElementsAre(1, Gt(0), _, 5))); +``` + +The above matcher says that the container must have 4 elements, which +must be 1, greater than 0, anything, and 5 respectively. + +If you instead write: + +``` +using ::testing::_; +using ::testing::Gt; +using ::testing::UnorderedElementsAre; +... + + MOCK_METHOD1(Foo, void(const vector& numbers)); +... + + EXPECT_CALL(mock, Foo(UnorderedElementsAre(1, Gt(0), _, 5))); +``` + +It means that the container must have 4 elements, which under some +permutation must be 1, greater than 0, anything, and 5 respectively. + +`ElementsAre()` and `UnorderedElementsAre()` are overloaded to take 0 +to 10 arguments. If more are needed, you can place them in a C-style +array and use `ElementsAreArray()` or `UnorderedElementsAreArray()` +instead: + +``` +using ::testing::ElementsAreArray; +... + + // ElementsAreArray accepts an array of element values. + const int expected_vector1[] = { 1, 5, 2, 4, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector1))); + + // Or, an array of element matchers. + Matcher expected_vector2 = { 1, Gt(2), _, 3, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector2))); +``` + +In case the array needs to be dynamically created (and therefore the +array size cannot be inferred by the compiler), you can give +`ElementsAreArray()` an additional argument to specify the array size: + +``` +using ::testing::ElementsAreArray; +... + int* const expected_vector3 = new int[count]; + ... fill expected_vector3 with values ... + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector3, count))); +``` + +**Tips:** + + * `ElementsAre*()` can be used to match _any_ container that implements the STL iterator pattern (i.e. it has a `const_iterator` type and supports `begin()/end()`), not just the ones defined in STL. It will even work with container types yet to be written - as long as they follows the above pattern. + * You can use nested `ElementsAre*()` to match nested (multi-dimensional) containers. + * If the container is passed by pointer instead of by reference, just write `Pointee(ElementsAre*(...))`. + * The order of elements _matters_ for `ElementsAre*()`. Therefore don't use it with containers whose element order is undefined (e.g. `hash_map`). + +## Sharing Matchers ## + +Under the hood, a Google Mock matcher object consists of a pointer to +a ref-counted implementation object. Copying matchers is allowed and +very efficient, as only the pointer is copied. When the last matcher +that references the implementation object dies, the implementation +object will be deleted. + +Therefore, if you have some complex matcher that you want to use again +and again, there is no need to build it everytime. Just assign it to a +matcher variable and use that variable repeatedly! For example, + +``` + Matcher in_range = AllOf(Gt(5), Le(10)); + ... use in_range as a matcher in multiple EXPECT_CALLs ... +``` + +# Setting Expectations # + +## Knowing When to Expect ## + +`ON_CALL` is likely the single most under-utilized construct in Google Mock. + +There are basically two constructs for defining the behavior of a mock object: `ON_CALL` and `EXPECT_CALL`. The difference? `ON_CALL` defines what happens when a mock method is called, but _doesn't imply any expectation on the method being called._ `EXPECT_CALL` not only defines the behavior, but also sets an expectation that _the method will be called with the given arguments, for the given number of times_ (and _in the given order_ when you specify the order too). + +Since `EXPECT_CALL` does more, isn't it better than `ON_CALL`? Not really. Every `EXPECT_CALL` adds a constraint on the behavior of the code under test. Having more constraints than necessary is _baaad_ - even worse than not having enough constraints. + +This may be counter-intuitive. How could tests that verify more be worse than tests that verify less? Isn't verification the whole point of tests? + +The answer, lies in _what_ a test should verify. **A good test verifies the contract of the code.** If a test over-specifies, it doesn't leave enough freedom to the implementation. As a result, changing the implementation without breaking the contract (e.g. refactoring and optimization), which should be perfectly fine to do, can break such tests. Then you have to spend time fixing them, only to see them broken again the next time the implementation is changed. + +Keep in mind that one doesn't have to verify more than one property in one test. In fact, **it's a good style to verify only one thing in one test.** If you do that, a bug will likely break only one or two tests instead of dozens (which case would you rather debug?). If you are also in the habit of giving tests descriptive names that tell what they verify, you can often easily guess what's wrong just from the test log itself. + +So use `ON_CALL` by default, and only use `EXPECT_CALL` when you actually intend to verify that the call is made. For example, you may have a bunch of `ON_CALL`s in your test fixture to set the common mock behavior shared by all tests in the same group, and write (scarcely) different `EXPECT_CALL`s in different `TEST_F`s to verify different aspects of the code's behavior. Compared with the style where each `TEST` has many `EXPECT_CALL`s, this leads to tests that are more resilient to implementational changes (and thus less likely to require maintenance) and makes the intent of the tests more obvious (so they are easier to maintain when you do need to maintain them). + +If you are bothered by the "Uninteresting mock function call" message printed when a mock method without an `EXPECT_CALL` is called, you may use a `NiceMock` instead to suppress all such messages for the mock object, or suppress the message for specific methods by adding `EXPECT_CALL(...).Times(AnyNumber())`. DO NOT suppress it by blindly adding an `EXPECT_CALL(...)`, or you'll have a test that's a pain to maintain. + +## Ignoring Uninteresting Calls ## + +If you are not interested in how a mock method is called, just don't +say anything about it. In this case, if the method is ever called, +Google Mock will perform its default action to allow the test program +to continue. If you are not happy with the default action taken by +Google Mock, you can override it using `DefaultValue::Set()` +(described later in this document) or `ON_CALL()`. + +Please note that once you expressed interest in a particular mock +method (via `EXPECT_CALL()`), all invocations to it must match some +expectation. If this function is called but the arguments don't match +any `EXPECT_CALL()` statement, it will be an error. + +## Disallowing Unexpected Calls ## + +If a mock method shouldn't be called at all, explicitly say so: + +``` +using ::testing::_; +... + EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +If some calls to the method are allowed, but the rest are not, just +list all the expected calls: + +``` +using ::testing::AnyNumber; +using ::testing::Gt; +... + EXPECT_CALL(foo, Bar(5)); + EXPECT_CALL(foo, Bar(Gt(10))) + .Times(AnyNumber()); +``` + +A call to `foo.Bar()` that doesn't match any of the `EXPECT_CALL()` +statements will be an error. + +## Understanding Uninteresting vs Unexpected Calls ## + +_Uninteresting_ calls and _unexpected_ calls are different concepts in Google Mock. _Very_ different. + +A call `x.Y(...)` is **uninteresting** if there's _not even a single_ `EXPECT_CALL(x, Y(...))` set. In other words, the test isn't interested in the `x.Y()` method at all, as evident in that the test doesn't care to say anything about it. + +A call `x.Y(...)` is **unexpected** if there are some `EXPECT_CALL(x, Y(...))s` set, but none of them matches the call. Put another way, the test is interested in the `x.Y()` method (therefore it _explicitly_ sets some `EXPECT_CALL` to verify how it's called); however, the verification fails as the test doesn't expect this particular call to happen. + +**An unexpected call is always an error,** as the code under test doesn't behave the way the test expects it to behave. + +**By default, an uninteresting call is not an error,** as it violates no constraint specified by the test. (Google Mock's philosophy is that saying nothing means there is no constraint.) However, it leads to a warning, as it _might_ indicate a problem (e.g. the test author might have forgotten to specify a constraint). + +In Google Mock, `NiceMock` and `StrictMock` can be used to make a mock class "nice" or "strict". How does this affect uninteresting calls and unexpected calls? + +A **nice mock** suppresses uninteresting call warnings. It is less chatty than the default mock, but otherwise is the same. If a test fails with a default mock, it will also fail using a nice mock instead. And vice versa. Don't expect making a mock nice to change the test's result. + +A **strict mock** turns uninteresting call warnings into errors. So making a mock strict may change the test's result. + +Let's look at an example: + +``` +TEST(...) { + NiceMock mock_registry; + EXPECT_CALL(mock_registry, GetDomainOwner("google.com")) + .WillRepeatedly(Return("Larry Page")); + + // Use mock_registry in code under test. + ... &mock_registry ... +} +``` + +The sole `EXPECT_CALL` here says that all calls to `GetDomainOwner()` must have `"google.com"` as the argument. If `GetDomainOwner("yahoo.com")` is called, it will be an unexpected call, and thus an error. Having a nice mock doesn't change the severity of an unexpected call. + +So how do we tell Google Mock that `GetDomainOwner()` can be called with some other arguments as well? The standard technique is to add a "catch all" `EXPECT_CALL`: + +``` + EXPECT_CALL(mock_registry, GetDomainOwner(_)) + .Times(AnyNumber()); // catches all other calls to this method. + EXPECT_CALL(mock_registry, GetDomainOwner("google.com")) + .WillRepeatedly(Return("Larry Page")); +``` + +Remember that `_` is the wildcard matcher that matches anything. With this, if `GetDomainOwner("google.com")` is called, it will do what the second `EXPECT_CALL` says; if it is called with a different argument, it will do what the first `EXPECT_CALL` says. + +Note that the order of the two `EXPECT_CALLs` is important, as a newer `EXPECT_CALL` takes precedence over an older one. + +For more on uninteresting calls, nice mocks, and strict mocks, read ["The Nice, the Strict, and the Naggy"](#the-nice-the-strict-and-the-naggy). + +## Expecting Ordered Calls ## + +Although an `EXPECT_CALL()` statement defined earlier takes precedence +when Google Mock tries to match a function call with an expectation, +by default calls don't have to happen in the order `EXPECT_CALL()` +statements are written. For example, if the arguments match the +matchers in the third `EXPECT_CALL()`, but not those in the first two, +then the third expectation will be used. + +If you would rather have all calls occur in the order of the +expectations, put the `EXPECT_CALL()` statements in a block where you +define a variable of type `InSequence`: + +``` + using ::testing::_; + using ::testing::InSequence; + + { + InSequence s; + + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(bar, DoThat(_)) + .Times(2); + EXPECT_CALL(foo, DoThis(6)); + } +``` + +In this example, we expect a call to `foo.DoThis(5)`, followed by two +calls to `bar.DoThat()` where the argument can be anything, which are +in turn followed by a call to `foo.DoThis(6)`. If a call occurred +out-of-order, Google Mock will report an error. + +## Expecting Partially Ordered Calls ## + +Sometimes requiring everything to occur in a predetermined order can +lead to brittle tests. For example, we may care about `A` occurring +before both `B` and `C`, but aren't interested in the relative order +of `B` and `C`. In this case, the test should reflect our real intent, +instead of being overly constraining. + +Google Mock allows you to impose an arbitrary DAG (directed acyclic +graph) on the calls. One way to express the DAG is to use the +[After](CheatSheet.md#the-after-clause) clause of `EXPECT_CALL`. + +Another way is via the `InSequence()` clause (not the same as the +`InSequence` class), which we borrowed from jMock 2. It's less +flexible than `After()`, but more convenient when you have long chains +of sequential calls, as it doesn't require you to come up with +different names for the expectations in the chains. Here's how it +works: + +If we view `EXPECT_CALL()` statements as nodes in a graph, and add an +edge from node A to node B wherever A must occur before B, we can get +a DAG. We use the term "sequence" to mean a directed path in this +DAG. Now, if we decompose the DAG into sequences, we just need to know +which sequences each `EXPECT_CALL()` belongs to in order to be able to +reconstruct the orginal DAG. + +So, to specify the partial order on the expectations we need to do two +things: first to define some `Sequence` objects, and then for each +`EXPECT_CALL()` say which `Sequence` objects it is part +of. Expectations in the same sequence must occur in the order they are +written. For example, + +``` + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(foo, A()) + .InSequence(s1, s2); + EXPECT_CALL(bar, B()) + .InSequence(s1); + EXPECT_CALL(bar, C()) + .InSequence(s2); + EXPECT_CALL(foo, D()) + .InSequence(s2); +``` + +specifies the following DAG (where `s1` is `A -> B`, and `s2` is `A -> +C -> D`): + +``` + +---> B + | + A ---| + | + +---> C ---> D +``` + +This means that A must occur before B and C, and C must occur before +D. There's no restriction about the order other than these. + +## Controlling When an Expectation Retires ## + +When a mock method is called, Google Mock only consider expectations +that are still active. An expectation is active when created, and +becomes inactive (aka _retires_) when a call that has to occur later +has occurred. For example, in + +``` + using ::testing::_; + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #1 + .Times(AnyNumber()) + .InSequence(s1, s2); + EXPECT_CALL(log, Log(WARNING, _, "Data set is empty.")) // #2 + .InSequence(s1); + EXPECT_CALL(log, Log(WARNING, _, "User not found.")) // #3 + .InSequence(s2); +``` + +as soon as either #2 or #3 is matched, #1 will retire. If a warning +`"File too large."` is logged after this, it will be an error. + +Note that an expectation doesn't retire automatically when it's +saturated. For example, + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")); // #2 +``` + +says that there will be exactly one warning with the message `"File +too large."`. If the second warning contains this message too, #2 will +match again and result in an upper-bound-violated error. + +If this is not what you want, you can ask an expectation to retire as +soon as it becomes saturated: + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #2 + .RetiresOnSaturation(); +``` + +Here #2 can be used only once, so if you have two warnings with the +message `"File too large."`, the first will match #2 and the second +will match #1 - there will be no error. + +# Using Actions # + +## Returning References from Mock Methods ## + +If a mock function's return type is a reference, you need to use +`ReturnRef()` instead of `Return()` to return a result: + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + public: + MOCK_METHOD0(GetBar, Bar&()); +}; +... + + MockFoo foo; + Bar bar; + EXPECT_CALL(foo, GetBar()) + .WillOnce(ReturnRef(bar)); +``` + +## Returning Live Values from Mock Methods ## + +The `Return(x)` action saves a copy of `x` when the action is +_created_, and always returns the same value whenever it's +executed. Sometimes you may want to instead return the _live_ value of +`x` (i.e. its value at the time when the action is _executed_.). + +If the mock function's return type is a reference, you can do it using +`ReturnRef(x)`, as shown in the previous recipe ("Returning References +from Mock Methods"). However, Google Mock doesn't let you use +`ReturnRef()` in a mock function whose return type is not a reference, +as doing that usually indicates a user error. So, what shall you do? + +You may be tempted to try `ByRef()`: + +``` +using testing::ByRef; +using testing::Return; + +class MockFoo : public Foo { + public: + MOCK_METHOD0(GetValue, int()); +}; +... + int x = 0; + MockFoo foo; + EXPECT_CALL(foo, GetValue()) + .WillRepeatedly(Return(ByRef(x))); + x = 42; + EXPECT_EQ(42, foo.GetValue()); +``` + +Unfortunately, it doesn't work here. The above code will fail with error: + +``` +Value of: foo.GetValue() + Actual: 0 +Expected: 42 +``` + +The reason is that `Return(value)` converts `value` to the actual +return type of the mock function at the time when the action is +_created_, not when it is _executed_. (This behavior was chosen for +the action to be safe when `value` is a proxy object that references +some temporary objects.) As a result, `ByRef(x)` is converted to an +`int` value (instead of a `const int&`) when the expectation is set, +and `Return(ByRef(x))` will always return 0. + +`ReturnPointee(pointer)` was provided to solve this problem +specifically. It returns the value pointed to by `pointer` at the time +the action is _executed_: + +``` +using testing::ReturnPointee; +... + int x = 0; + MockFoo foo; + EXPECT_CALL(foo, GetValue()) + .WillRepeatedly(ReturnPointee(&x)); // Note the & here. + x = 42; + EXPECT_EQ(42, foo.GetValue()); // This will succeed now. +``` + +## Combining Actions ## + +Want to do more than one thing when a function is called? That's +fine. `DoAll()` allow you to do sequence of actions every time. Only +the return value of the last action in the sequence will be used. + +``` +using ::testing::DoAll; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Bar, bool(int n)); +}; +... + + EXPECT_CALL(foo, Bar(_)) + .WillOnce(DoAll(action_1, + action_2, + ... + action_n)); +``` + +## Mocking Side Effects ## + +Sometimes a method exhibits its effect not via returning a value but +via side effects. For example, it may change some global state or +modify an output argument. To mock side effects, in general you can +define your own action by implementing `::testing::ActionInterface`. + +If all you need to do is to change an output argument, the built-in +`SetArgPointee()` action is convenient: + +``` +using ::testing::SetArgPointee; + +class MockMutator : public Mutator { + public: + MOCK_METHOD2(Mutate, void(bool mutate, int* value)); + ... +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, Mutate(true, _)) + .WillOnce(SetArgPointee<1>(5)); +``` + +In this example, when `mutator.Mutate()` is called, we will assign 5 +to the `int` variable pointed to by argument #1 +(0-based). + +`SetArgPointee()` conveniently makes an internal copy of the +value you pass to it, removing the need to keep the value in scope and +alive. The implication however is that the value must have a copy +constructor and assignment operator. + +If the mock method also needs to return a value as well, you can chain +`SetArgPointee()` with `Return()` using `DoAll()`: + +``` +using ::testing::_; +using ::testing::Return; +using ::testing::SetArgPointee; + +class MockMutator : public Mutator { + public: + ... + MOCK_METHOD1(MutateInt, bool(int* value)); +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, MutateInt(_)) + .WillOnce(DoAll(SetArgPointee<0>(5), + Return(true))); +``` + +If the output argument is an array, use the +`SetArrayArgument(first, last)` action instead. It copies the +elements in source range `[first, last)` to the array pointed to by +the `N`-th (0-based) argument: + +``` +using ::testing::NotNull; +using ::testing::SetArrayArgument; + +class MockArrayMutator : public ArrayMutator { + public: + MOCK_METHOD2(Mutate, void(int* values, int num_values)); + ... +}; +... + + MockArrayMutator mutator; + int values[5] = { 1, 2, 3, 4, 5 }; + EXPECT_CALL(mutator, Mutate(NotNull(), 5)) + .WillOnce(SetArrayArgument<0>(values, values + 5)); +``` + +This also works when the argument is an output iterator: + +``` +using ::testing::_; +using ::testing::SeArrayArgument; + +class MockRolodex : public Rolodex { + public: + MOCK_METHOD1(GetNames, void(std::back_insert_iterator >)); + ... +}; +... + + MockRolodex rolodex; + vector names; + names.push_back("George"); + names.push_back("John"); + names.push_back("Thomas"); + EXPECT_CALL(rolodex, GetNames(_)) + .WillOnce(SetArrayArgument<0>(names.begin(), names.end())); +``` + +## Changing a Mock Object's Behavior Based on the State ## + +If you expect a call to change the behavior of a mock object, you can use `::testing::InSequence` to specify different behaviors before and after the call: + +``` +using ::testing::InSequence; +using ::testing::Return; + +... + { + InSequence seq; + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(true)); + EXPECT_CALL(my_mock, Flush()); + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(false)); + } + my_mock.FlushIfDirty(); +``` + +This makes `my_mock.IsDirty()` return `true` before `my_mock.Flush()` is called and return `false` afterwards. + +If the behavior change is more complex, you can store the effects in a variable and make a mock method get its return value from that variable: + +``` +using ::testing::_; +using ::testing::SaveArg; +using ::testing::Return; + +ACTION_P(ReturnPointee, p) { return *p; } +... + int previous_value = 0; + EXPECT_CALL(my_mock, GetPrevValue()) + .WillRepeatedly(ReturnPointee(&previous_value)); + EXPECT_CALL(my_mock, UpdateValue(_)) + .WillRepeatedly(SaveArg<0>(&previous_value)); + my_mock.DoSomethingToUpdateValue(); +``` + +Here `my_mock.GetPrevValue()` will always return the argument of the last `UpdateValue()` call. + +## Setting the Default Value for a Return Type ## + +If a mock method's return type is a built-in C++ type or pointer, by +default it will return 0 when invoked. Also, in C++ 11 and above, a mock +method whose return type has a default constructor will return a default-constructed +value by default. You only need to specify an +action if this default value doesn't work for you. + +Sometimes, you may want to change this default value, or you may want +to specify a default value for types Google Mock doesn't know +about. You can do this using the `::testing::DefaultValue` class +template: + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD0(CalculateBar, Bar()); +}; +... + + Bar default_bar; + // Sets the default return value for type Bar. + DefaultValue::Set(default_bar); + + MockFoo foo; + + // We don't need to specify an action here, as the default + // return value works for us. + EXPECT_CALL(foo, CalculateBar()); + + foo.CalculateBar(); // This should return default_bar. + + // Unsets the default return value. + DefaultValue::Clear(); +``` + +Please note that changing the default value for a type can make you +tests hard to understand. We recommend you to use this feature +judiciously. For example, you may want to make sure the `Set()` and +`Clear()` calls are right next to the code that uses your mock. + +## Setting the Default Actions for a Mock Method ## + +You've learned how to change the default value of a given +type. However, this may be too coarse for your purpose: perhaps you +have two mock methods with the same return type and you want them to +have different behaviors. The `ON_CALL()` macro allows you to +customize your mock's behavior at the method level: + +``` +using ::testing::_; +using ::testing::AnyNumber; +using ::testing::Gt; +using ::testing::Return; +... + ON_CALL(foo, Sign(_)) + .WillByDefault(Return(-1)); + ON_CALL(foo, Sign(0)) + .WillByDefault(Return(0)); + ON_CALL(foo, Sign(Gt(0))) + .WillByDefault(Return(1)); + + EXPECT_CALL(foo, Sign(_)) + .Times(AnyNumber()); + + foo.Sign(5); // This should return 1. + foo.Sign(-9); // This should return -1. + foo.Sign(0); // This should return 0. +``` + +As you may have guessed, when there are more than one `ON_CALL()` +statements, the news order take precedence over the older ones. In +other words, the **last** one that matches the function arguments will +be used. This matching order allows you to set up the common behavior +in a mock object's constructor or the test fixture's set-up phase and +specialize the mock's behavior later. + +## Using Functions/Methods/Functors as Actions ## + +If the built-in actions don't suit you, you can easily use an existing +function, method, or functor as an action: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(Sum, int(int x, int y)); + MOCK_METHOD1(ComplexJob, bool(int x)); +}; + +int CalculateSum(int x, int y) { return x + y; } + +class Helper { + public: + bool ComplexJob(int x); +}; +... + + MockFoo foo; + Helper helper; + EXPECT_CALL(foo, Sum(_, _)) + .WillOnce(Invoke(CalculateSum)); + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(Invoke(&helper, &Helper::ComplexJob)); + + foo.Sum(5, 6); // Invokes CalculateSum(5, 6). + foo.ComplexJob(10); // Invokes helper.ComplexJob(10); +``` + +The only requirement is that the type of the function, etc must be +_compatible_ with the signature of the mock function, meaning that the +latter's arguments can be implicitly converted to the corresponding +arguments of the former, and the former's return type can be +implicitly converted to that of the latter. So, you can invoke +something whose type is _not_ exactly the same as the mock function, +as long as it's safe to do so - nice, huh? + +## Invoking a Function/Method/Functor Without Arguments ## + +`Invoke()` is very useful for doing actions that are more complex. It +passes the mock function's arguments to the function or functor being +invoked such that the callee has the full context of the call to work +with. If the invoked function is not interested in some or all of the +arguments, it can simply ignore them. + +Yet, a common pattern is that a test author wants to invoke a function +without the arguments of the mock function. `Invoke()` allows her to +do that using a wrapper function that throws away the arguments before +invoking an underlining nullary function. Needless to say, this can be +tedious and obscures the intent of the test. + +`InvokeWithoutArgs()` solves this problem. It's like `Invoke()` except +that it doesn't pass the mock function's arguments to the +callee. Here's an example: + +``` +using ::testing::_; +using ::testing::InvokeWithoutArgs; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(ComplexJob, bool(int n)); +}; + +bool Job1() { ... } +... + + MockFoo foo; + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(InvokeWithoutArgs(Job1)); + + foo.ComplexJob(10); // Invokes Job1(). +``` + +## Invoking an Argument of the Mock Function ## + +Sometimes a mock function will receive a function pointer or a functor +(in other words, a "callable") as an argument, e.g. + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, bool(int n, bool (*fp)(int))); +}; +``` + +and you may want to invoke this callable argument: + +``` +using ::testing::_; +... + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(...); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +Arghh, you need to refer to a mock function argument but C++ has no +lambda (yet), so you have to define your own action. :-( Or do you +really? + +Well, Google Mock has an action to solve _exactly_ this problem: + +``` + InvokeArgument(arg_1, arg_2, ..., arg_m) +``` + +will invoke the `N`-th (0-based) argument the mock function receives, +with `arg_1`, `arg_2`, ..., and `arg_m`. No matter if the argument is +a function pointer or a functor, Google Mock handles them both. + +With that, you could write: + +``` +using ::testing::_; +using ::testing::InvokeArgument; +... + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(InvokeArgument<1>(5)); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +What if the callable takes an argument by reference? No problem - just +wrap it inside `ByRef()`: + +``` +... + MOCK_METHOD1(Bar, bool(bool (*fp)(int, const Helper&))); +... +using ::testing::_; +using ::testing::ByRef; +using ::testing::InvokeArgument; +... + + MockFoo foo; + Helper helper; + ... + EXPECT_CALL(foo, Bar(_)) + .WillOnce(InvokeArgument<0>(5, ByRef(helper))); + // ByRef(helper) guarantees that a reference to helper, not a copy of it, + // will be passed to the callable. +``` + +What if the callable takes an argument by reference and we do **not** +wrap the argument in `ByRef()`? Then `InvokeArgument()` will _make a +copy_ of the argument, and pass a _reference to the copy_, instead of +a reference to the original value, to the callable. This is especially +handy when the argument is a temporary value: + +``` +... + MOCK_METHOD1(DoThat, bool(bool (*f)(const double& x, const string& s))); +... +using ::testing::_; +using ::testing::InvokeArgument; +... + + MockFoo foo; + ... + EXPECT_CALL(foo, DoThat(_)) + .WillOnce(InvokeArgument<0>(5.0, string("Hi"))); + // Will execute (*f)(5.0, string("Hi")), where f is the function pointer + // DoThat() receives. Note that the values 5.0 and string("Hi") are + // temporary and dead once the EXPECT_CALL() statement finishes. Yet + // it's fine to perform this action later, since a copy of the values + // are kept inside the InvokeArgument action. +``` + +## Ignoring an Action's Result ## + +Sometimes you have an action that returns _something_, but you need an +action that returns `void` (perhaps you want to use it in a mock +function that returns `void`, or perhaps it needs to be used in +`DoAll()` and it's not the last in the list). `IgnoreResult()` lets +you do that. For example: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Return; + +int Process(const MyData& data); +string DoSomething(); + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Abc, void(const MyData& data)); + MOCK_METHOD0(Xyz, bool()); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, Abc(_)) + // .WillOnce(Invoke(Process)); + // The above line won't compile as Process() returns int but Abc() needs + // to return void. + .WillOnce(IgnoreResult(Invoke(Process))); + + EXPECT_CALL(foo, Xyz()) + .WillOnce(DoAll(IgnoreResult(Invoke(DoSomething)), + // Ignores the string DoSomething() returns. + Return(true))); +``` + +Note that you **cannot** use `IgnoreResult()` on an action that already +returns `void`. Doing so will lead to ugly compiler errors. + +## Selecting an Action's Arguments ## + +Say you have a mock function `Foo()` that takes seven arguments, and +you have a custom action that you want to invoke when `Foo()` is +called. Trouble is, the custom action only wants three arguments: + +``` +using ::testing::_; +using ::testing::Invoke; +... + MOCK_METHOD7(Foo, bool(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight)); +... + +bool IsVisibleInQuadrant1(bool visible, int x, int y) { + return visible && x >= 0 && y >= 0; +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(IsVisibleInQuadrant1)); // Uh, won't compile. :-( +``` + +To please the compiler God, you can to define an "adaptor" that has +the same signature as `Foo()` and calls the custom action with the +right arguments: + +``` +using ::testing::_; +using ::testing::Invoke; + +bool MyIsVisibleInQuadrant1(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight) { + return IsVisibleInQuadrant1(visible, x, y); +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(MyIsVisibleInQuadrant1)); // Now it works. +``` + +But isn't this awkward? + +Google Mock provides a generic _action adaptor_, so you can spend your +time minding more important business than writing your own +adaptors. Here's the syntax: + +``` + WithArgs(action) +``` + +creates an action that passes the arguments of the mock function at +the given indices (0-based) to the inner `action` and performs +it. Using `WithArgs`, our original example can be written as: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::WithArgs; +... + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(WithArgs<0, 2, 3>(Invoke(IsVisibleInQuadrant1))); + // No need to define your own adaptor. +``` + +For better readability, Google Mock also gives you: + + * `WithoutArgs(action)` when the inner `action` takes _no_ argument, and + * `WithArg(action)` (no `s` after `Arg`) when the inner `action` takes _one_ argument. + +As you may have realized, `InvokeWithoutArgs(...)` is just syntactic +sugar for `WithoutArgs(Invoke(...))`. + +Here are more tips: + + * The inner action used in `WithArgs` and friends does not have to be `Invoke()` -- it can be anything. + * You can repeat an argument in the argument list if necessary, e.g. `WithArgs<2, 3, 3, 5>(...)`. + * You can change the order of the arguments, e.g. `WithArgs<3, 2, 1>(...)`. + * The types of the selected arguments do _not_ have to match the signature of the inner action exactly. It works as long as they can be implicitly converted to the corresponding arguments of the inner action. For example, if the 4-th argument of the mock function is an `int` and `my_action` takes a `double`, `WithArg<4>(my_action)` will work. + +## Ignoring Arguments in Action Functions ## + +The selecting-an-action's-arguments recipe showed us one way to make a +mock function and an action with incompatible argument lists fit +together. The downside is that wrapping the action in +`WithArgs<...>()` can get tedious for people writing the tests. + +If you are defining a function, method, or functor to be used with +`Invoke*()`, and you are not interested in some of its arguments, an +alternative to `WithArgs` is to declare the uninteresting arguments as +`Unused`. This makes the definition less cluttered and less fragile in +case the types of the uninteresting arguments change. It could also +increase the chance the action function can be reused. For example, +given + +``` + MOCK_METHOD3(Foo, double(const string& label, double x, double y)); + MOCK_METHOD3(Bar, double(int index, double x, double y)); +``` + +instead of + +``` +using ::testing::_; +using ::testing::Invoke; + +double DistanceToOriginWithLabel(const string& label, double x, double y) { + return sqrt(x*x + y*y); +} + +double DistanceToOriginWithIndex(int index, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOriginWithLabel)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOriginWithIndex)); +``` + +you could write + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Unused; + +double DistanceToOrigin(Unused, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOrigin)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOrigin)); +``` + +## Sharing Actions ## + +Just like matchers, a Google Mock action object consists of a pointer +to a ref-counted implementation object. Therefore copying actions is +also allowed and very efficient. When the last action that references +the implementation object dies, the implementation object will be +deleted. + +If you have some complex action that you want to use again and again, +you may not have to build it from scratch everytime. If the action +doesn't have an internal state (i.e. if it always does the same thing +no matter how many times it has been called), you can assign it to an +action variable and use that variable repeatedly. For example: + +``` + Action set_flag = DoAll(SetArgPointee<0>(5), + Return(true)); + ... use set_flag in .WillOnce() and .WillRepeatedly() ... +``` + +However, if the action has its own state, you may be surprised if you +share the action object. Suppose you have an action factory +`IncrementCounter(init)` which creates an action that increments and +returns a counter whose initial value is `init`, using two actions +created from the same expression and using a shared action will +exihibit different behaviors. Example: + +``` + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(IncrementCounter(0)); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(IncrementCounter(0)); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 1 - Blah() uses a different + // counter than Bar()'s. +``` + +versus + +``` + Action increment = IncrementCounter(0); + + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(increment); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(increment); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 3 - the counter is shared. +``` + +# Misc Recipes on Using Google Mock # + +## Mocking Methods That Use Move-Only Types ## + +C++11 introduced move-only types. A move-only-typed value can be moved from one object to another, but cannot be copied. `std::unique_ptr` is probably the most commonly used move-only type. + +Mocking a method that takes and/or returns move-only types presents some challenges, but nothing insurmountable. This recipe shows you how you can do it. + +Let’s say we are working on a fictional project that lets one post and share snippets called “buzzes”. Your code uses these types: + +``` +enum class AccessLevel { kInternal, kPublic }; + +class Buzz { + public: + explicit Buzz(AccessLevel access) { … } + ... +}; + +class Buzzer { + public: + virtual ~Buzzer() {} + virtual std::unique_ptr MakeBuzz(const std::string& text) = 0; + virtual bool ShareBuzz(std::unique_ptr buzz, Time timestamp) = 0; + ... +}; +``` + +A `Buzz` object represents a snippet being posted. A class that implements the `Buzzer` interface is capable of creating and sharing `Buzz`. Methods in `Buzzer` may return a `unique_ptr` or take a `unique_ptr`. Now we need to mock `Buzzer` in our tests. + +To mock a method that returns a move-only type, you just use the familiar `MOCK_METHOD` syntax as usual: + +``` +class MockBuzzer : public Buzzer { + public: + MOCK_METHOD1(MakeBuzz, std::unique_ptr(const std::string& text)); + … +}; +``` + +However, if you attempt to use the same `MOCK_METHOD` pattern to mock a method that takes a move-only parameter, you’ll get a compiler error currently: + +``` + // Does NOT compile! + MOCK_METHOD2(ShareBuzz, bool(std::unique_ptr buzz, Time timestamp)); +``` + +While it’s highly desirable to make this syntax just work, it’s not trivial and the work hasn’t been done yet. Fortunately, there is a trick you can apply today to get something that works nearly as well as this. + +The trick, is to delegate the `ShareBuzz()` method to a mock method (let’s call it `DoShareBuzz()`) that does not take move-only parameters: + +``` +class MockBuzzer : public Buzzer { + public: + MOCK_METHOD1(MakeBuzz, std::unique_ptr(const std::string& text)); + MOCK_METHOD2(DoShareBuzz, bool(Buzz* buzz, Time timestamp)); + bool ShareBuzz(std::unique_ptr buzz, Time timestamp) { + return DoShareBuzz(buzz.get(), timestamp); + } +}; +``` + +Note that there's no need to define or declare `DoShareBuzz()` in a base class. You only need to define it as a `MOCK_METHOD` in the mock class. + +Now that we have the mock class defined, we can use it in tests. In the following code examples, we assume that we have defined a `MockBuzzer` object named `mock_buzzer_`: + +``` + MockBuzzer mock_buzzer_; +``` + +First let’s see how we can set expectations on the `MakeBuzz()` method, which returns a `unique_ptr`. + +As usual, if you set an expectation without an action (i.e. the `.WillOnce()` or `.WillRepeated()` clause), when that expectation fires, the default action for that method will be taken. Since `unique_ptr<>` has a default constructor that returns a null `unique_ptr`, that’s what you’ll get if you don’t specify an action: + +``` + // Use the default action. + EXPECT_CALL(mock_buzzer_, MakeBuzz("hello")); + + // Triggers the previous EXPECT_CALL. + EXPECT_EQ(nullptr, mock_buzzer_.MakeBuzz("hello")); +``` + +If you are not happy with the default action, you can tweak it. Depending on what you need, you may either tweak the default action for a specific (mock object, mock method) combination using `ON_CALL()`, or you may tweak the default action for all mock methods that return a specific type. The usage of `ON_CALL()` is similar to `EXPECT_CALL()`, so we’ll skip it and just explain how to do the latter (tweaking the default action for a specific return type). You do this via the `DefaultValue<>::SetFactory()` and `DefaultValue<>::Clear()` API: + +``` + // Sets the default action for return type std::unique_ptr to + // creating a new Buzz every time. + DefaultValue>::SetFactory( + [] { return MakeUnique(AccessLevel::kInternal); }); + + // When this fires, the default action of MakeBuzz() will run, which + // will return a new Buzz object. + EXPECT_CALL(mock_buzzer_, MakeBuzz("hello")).Times(AnyNumber()); + + auto buzz1 = mock_buzzer_.MakeBuzz("hello"); + auto buzz2 = mock_buzzer_.MakeBuzz("hello"); + EXPECT_NE(nullptr, buzz1); + EXPECT_NE(nullptr, buzz2); + EXPECT_NE(buzz1, buzz2); + + // Resets the default action for return type std::unique_ptr, + // to avoid interfere with other tests. + DefaultValue>::Clear(); +``` + +What if you want the method to do something other than the default action? If you just need to return a pre-defined move-only value, you can use the `Return(ByMove(...))` action: + +``` + // When this fires, the unique_ptr<> specified by ByMove(...) will + // be returned. + EXPECT_CALL(mock_buzzer_, MakeBuzz("world")) + .WillOnce(Return(ByMove(MakeUnique(AccessLevel::kInternal)))); + + EXPECT_NE(nullptr, mock_buzzer_.MakeBuzz("world")); +``` + +Note that `ByMove()` is essential here - if you drop it, the code won’t compile. + +Quiz time! What do you think will happen if a `Return(ByMove(...))` action is performed more than once (e.g. you write `….WillRepeatedly(Return(ByMove(...)));`)? Come think of it, after the first time the action runs, the source value will be consumed (since it’s a move-only value), so the next time around, there’s no value to move from -- you’ll get a run-time error that `Return(ByMove(...))` can only be run once. + +If you need your mock method to do more than just moving a pre-defined value, remember that you can always use `Invoke()` to call a lambda or a callable object, which can do pretty much anything you want: + +``` + EXPECT_CALL(mock_buzzer_, MakeBuzz("x")) + .WillRepeatedly(Invoke([](const std::string& text) { + return std::make_unique(AccessLevel::kInternal); + })); + + EXPECT_NE(nullptr, mock_buzzer_.MakeBuzz("x")); + EXPECT_NE(nullptr, mock_buzzer_.MakeBuzz("x")); +``` + +Every time this `EXPECT_CALL` fires, a new `unique_ptr` will be created and returned. You cannot do this with `Return(ByMove(...))`. + +Now there’s one topic we haven’t covered: how do you set expectations on `ShareBuzz()`, which takes a move-only-typed parameter? The answer is you don’t. Instead, you set expectations on the `DoShareBuzz()` mock method (remember that we defined a `MOCK_METHOD` for `DoShareBuzz()`, not `ShareBuzz()`): + +``` + EXPECT_CALL(mock_buzzer_, DoShareBuzz(NotNull(), _)); + + // When one calls ShareBuzz() on the MockBuzzer like this, the call is + // forwarded to DoShareBuzz(), which is mocked. Therefore this statement + // will trigger the above EXPECT_CALL. + mock_buzzer_.ShareBuzz(MakeUnique<Buzz>(AccessLevel::kInternal), + ::base::Now()); +``` + +Some of you may have spotted one problem with this approach: the `DoShareBuzz()` mock method differs from the real `ShareBuzz()` method in that it cannot take ownership of the buzz parameter - `ShareBuzz()` will always delete buzz after `DoShareBuzz()` returns. What if you need to save the buzz object somewhere for later use when `ShareBuzz()` is called? Indeed, you'd be stuck. + +Another problem with the `DoShareBuzz()` we had is that it can surprise people reading or maintaining the test, as one would expect that `DoShareBuzz()` has (logically) the same contract as `ShareBuzz()`. + +Fortunately, these problems can be fixed with a bit more code. Let's try to get it right this time: + +``` +class MockBuzzer : public Buzzer { + public: + MockBuzzer() { + // Since DoShareBuzz(buzz, time) is supposed to take ownership of + // buzz, define a default behavior for DoShareBuzz(buzz, time) to + // delete buzz. + ON_CALL(*this, DoShareBuzz(_, _)) + .WillByDefault(Invoke([](Buzz* buzz, Time timestamp) { + delete buzz; + return true; + })); + } + + MOCK_METHOD1(MakeBuzz, std::unique_ptr(const std::string& text)); + + // Takes ownership of buzz. + MOCK_METHOD2(DoShareBuzz, bool(Buzz* buzz, Time timestamp)); + bool ShareBuzz(std::unique_ptr buzz, Time timestamp) { + return DoShareBuzz(buzz.release(), timestamp); + } +}; +``` + +Now, the mock `DoShareBuzz()` method is free to save the buzz argument for later use if this is what you want: + +``` + std::unique_ptr intercepted_buzz; + EXPECT_CALL(mock_buzzer_, DoShareBuzz(NotNull(), _)) + .WillOnce(Invoke([&intercepted_buzz](Buzz* buzz, Time timestamp) { + // Save buzz in intercepted_buzz for analysis later. + intercepted_buzz.reset(buzz); + return false; + })); + + mock_buzzer_.ShareBuzz(std::make_unique(AccessLevel::kInternal), + Now()); + EXPECT_NE(nullptr, intercepted_buzz); +``` + +Using the tricks covered in this recipe, you are now able to mock methods that take and/or return move-only types. Put your newly-acquired power to good use - when you design a new API, you can now feel comfortable using `unique_ptrs` as appropriate, without fearing that doing so will compromise your tests. + +## Making the Compilation Faster ## + +Believe it or not, the _vast majority_ of the time spent on compiling +a mock class is in generating its constructor and destructor, as they +perform non-trivial tasks (e.g. verification of the +expectations). What's more, mock methods with different signatures +have different types and thus their constructors/destructors need to +be generated by the compiler separately. As a result, if you mock many +different types of methods, compiling your mock class can get really +slow. + +If you are experiencing slow compilation, you can move the definition +of your mock class' constructor and destructor out of the class body +and into a `.cpp` file. This way, even if you `#include` your mock +class in N files, the compiler only needs to generate its constructor +and destructor once, resulting in a much faster compilation. + +Let's illustrate the idea using an example. Here's the definition of a +mock class before applying this recipe: + +``` +// File mock_foo.h. +... +class MockFoo : public Foo { + public: + // Since we don't declare the constructor or the destructor, + // the compiler will generate them in every translation unit + // where this mock class is used. + + MOCK_METHOD0(DoThis, int()); + MOCK_METHOD1(DoThat, bool(const char* str)); + ... more mock methods ... +}; +``` + +After the change, it would look like: + +``` +// File mock_foo.h. +... +class MockFoo : public Foo { + public: + // The constructor and destructor are declared, but not defined, here. + MockFoo(); + virtual ~MockFoo(); + + MOCK_METHOD0(DoThis, int()); + MOCK_METHOD1(DoThat, bool(const char* str)); + ... more mock methods ... +}; +``` +and +``` +// File mock_foo.cpp. +#include "path/to/mock_foo.h" + +// The definitions may appear trivial, but the functions actually do a +// lot of things through the constructors/destructors of the member +// variables used to implement the mock methods. +MockFoo::MockFoo() {} +MockFoo::~MockFoo() {} +``` + +## Forcing a Verification ## + +When it's being destoyed, your friendly mock object will automatically +verify that all expectations on it have been satisfied, and will +generate [Google Test](../../googletest/) failures +if not. This is convenient as it leaves you with one less thing to +worry about. That is, unless you are not sure if your mock object will +be destoyed. + +How could it be that your mock object won't eventually be destroyed? +Well, it might be created on the heap and owned by the code you are +testing. Suppose there's a bug in that code and it doesn't delete the +mock object properly - you could end up with a passing test when +there's actually a bug. + +Using a heap checker is a good idea and can alleviate the concern, but +its implementation may not be 100% reliable. So, sometimes you do want +to _force_ Google Mock to verify a mock object before it is +(hopefully) destructed. You can do this with +`Mock::VerifyAndClearExpectations(&mock_object)`: + +``` +TEST(MyServerTest, ProcessesRequest) { + using ::testing::Mock; + + MockFoo* const foo = new MockFoo; + EXPECT_CALL(*foo, ...)...; + // ... other expectations ... + + // server now owns foo. + MyServer server(foo); + server.ProcessRequest(...); + + // In case that server's destructor will forget to delete foo, + // this will verify the expectations anyway. + Mock::VerifyAndClearExpectations(foo); +} // server is destroyed when it goes out of scope here. +``` + +**Tip:** The `Mock::VerifyAndClearExpectations()` function returns a +`bool` to indicate whether the verification was successful (`true` for +yes), so you can wrap that function call inside a `ASSERT_TRUE()` if +there is no point going further when the verification has failed. + +## Using Check Points ## + +Sometimes you may want to "reset" a mock object at various check +points in your test: at each check point, you verify that all existing +expectations on the mock object have been satisfied, and then you set +some new expectations on it as if it's newly created. This allows you +to work with a mock object in "phases" whose sizes are each +manageable. + +One such scenario is that in your test's `SetUp()` function, you may +want to put the object you are testing into a certain state, with the +help from a mock object. Once in the desired state, you want to clear +all expectations on the mock, such that in the `TEST_F` body you can +set fresh expectations on it. + +As you may have figured out, the `Mock::VerifyAndClearExpectations()` +function we saw in the previous recipe can help you here. Or, if you +are using `ON_CALL()` to set default actions on the mock object and +want to clear the default actions as well, use +`Mock::VerifyAndClear(&mock_object)` instead. This function does what +`Mock::VerifyAndClearExpectations(&mock_object)` does and returns the +same `bool`, **plus** it clears the `ON_CALL()` statements on +`mock_object` too. + +Another trick you can use to achieve the same effect is to put the +expectations in sequences and insert calls to a dummy "check-point" +function at specific places. Then you can verify that the mock +function calls do happen at the right time. For example, if you are +exercising code: + +``` +Foo(1); +Foo(2); +Foo(3); +``` + +and want to verify that `Foo(1)` and `Foo(3)` both invoke +`mock.Bar("a")`, but `Foo(2)` doesn't invoke anything. You can write: + +``` +using ::testing::MockFunction; + +TEST(FooTest, InvokesBarCorrectly) { + MyMock mock; + // Class MockFunction has exactly one mock method. It is named + // Call() and has type F. + MockFunction check; + { + InSequence s; + + EXPECT_CALL(mock, Bar("a")); + EXPECT_CALL(check, Call("1")); + EXPECT_CALL(check, Call("2")); + EXPECT_CALL(mock, Bar("a")); + } + Foo(1); + check.Call("1"); + Foo(2); + check.Call("2"); + Foo(3); +} +``` + +The expectation spec says that the first `Bar("a")` must happen before +check point "1", the second `Bar("a")` must happen after check point "2", +and nothing should happen between the two check points. The explicit +check points make it easy to tell which `Bar("a")` is called by which +call to `Foo()`. + +## Mocking Destructors ## + +Sometimes you want to make sure a mock object is destructed at the +right time, e.g. after `bar->A()` is called but before `bar->B()` is +called. We already know that you can specify constraints on the order +of mock function calls, so all we need to do is to mock the destructor +of the mock function. + +This sounds simple, except for one problem: a destructor is a special +function with special syntax and special semantics, and the +`MOCK_METHOD0` macro doesn't work for it: + +``` + MOCK_METHOD0(~MockFoo, void()); // Won't compile! +``` + +The good news is that you can use a simple pattern to achieve the same +effect. First, add a mock function `Die()` to your mock class and call +it in the destructor, like this: + +``` +class MockFoo : public Foo { + ... + // Add the following two lines to the mock class. + MOCK_METHOD0(Die, void()); + virtual ~MockFoo() { Die(); } +}; +``` + +(If the name `Die()` clashes with an existing symbol, choose another +name.) Now, we have translated the problem of testing when a `MockFoo` +object dies to testing when its `Die()` method is called: + +``` + MockFoo* foo = new MockFoo; + MockBar* bar = new MockBar; + ... + { + InSequence s; + + // Expects *foo to die after bar->A() and before bar->B(). + EXPECT_CALL(*bar, A()); + EXPECT_CALL(*foo, Die()); + EXPECT_CALL(*bar, B()); + } +``` + +And that's that. + +## Using Google Mock and Threads ## + +**IMPORTANT NOTE:** What we describe in this recipe is **ONLY** true on +platforms where Google Mock is thread-safe. Currently these are only +platforms that support the pthreads library (this includes Linux and Mac). +To make it thread-safe on other platforms we only need to implement +some synchronization operations in `"gtest/internal/gtest-port.h"`. + +In a **unit** test, it's best if you could isolate and test a piece of +code in a single-threaded context. That avoids race conditions and +dead locks, and makes debugging your test much easier. + +Yet many programs are multi-threaded, and sometimes to test something +we need to pound on it from more than one thread. Google Mock works +for this purpose too. + +Remember the steps for using a mock: + + 1. Create a mock object `foo`. + 1. Set its default actions and expectations using `ON_CALL()` and `EXPECT_CALL()`. + 1. The code under test calls methods of `foo`. + 1. Optionally, verify and reset the mock. + 1. Destroy the mock yourself, or let the code under test destroy it. The destructor will automatically verify it. + +If you follow the following simple rules, your mocks and threads can +live happily together: + + * Execute your _test code_ (as opposed to the code being tested) in _one_ thread. This makes your test easy to follow. + * Obviously, you can do step #1 without locking. + * When doing step #2 and #5, make sure no other thread is accessing `foo`. Obvious too, huh? + * #3 and #4 can be done either in one thread or in multiple threads - anyway you want. Google Mock takes care of the locking, so you don't have to do any - unless required by your test logic. + +If you violate the rules (for example, if you set expectations on a +mock while another thread is calling its methods), you get undefined +behavior. That's not fun, so don't do it. + +Google Mock guarantees that the action for a mock function is done in +the same thread that called the mock function. For example, in + +``` + EXPECT_CALL(mock, Foo(1)) + .WillOnce(action1); + EXPECT_CALL(mock, Foo(2)) + .WillOnce(action2); +``` + +if `Foo(1)` is called in thread 1 and `Foo(2)` is called in thread 2, +Google Mock will execute `action1` in thread 1 and `action2` in thread +2. + +Google Mock does _not_ impose a sequence on actions performed in +different threads (doing so may create deadlocks as the actions may +need to cooperate). This means that the execution of `action1` and +`action2` in the above example _may_ interleave. If this is a problem, +you should add proper synchronization logic to `action1` and `action2` +to make the test thread-safe. + + +Also, remember that `DefaultValue` is a global resource that +potentially affects _all_ living mock objects in your +program. Naturally, you won't want to mess with it from multiple +threads or when there still are mocks in action. + +## Controlling How Much Information Google Mock Prints ## + +When Google Mock sees something that has the potential of being an +error (e.g. a mock function with no expectation is called, a.k.a. an +uninteresting call, which is allowed but perhaps you forgot to +explicitly ban the call), it prints some warning messages, including +the arguments of the function and the return value. Hopefully this +will remind you to take a look and see if there is indeed a problem. + +Sometimes you are confident that your tests are correct and may not +appreciate such friendly messages. Some other times, you are debugging +your tests or learning about the behavior of the code you are testing, +and wish you could observe every mock call that happens (including +argument values and the return value). Clearly, one size doesn't fit +all. + +You can control how much Google Mock tells you using the +`--gmock_verbose=LEVEL` command-line flag, where `LEVEL` is a string +with three possible values: + + * `info`: Google Mock will print all informational messages, warnings, and errors (most verbose). At this setting, Google Mock will also log any calls to the `ON_CALL/EXPECT_CALL` macros. + * `warning`: Google Mock will print both warnings and errors (less verbose). This is the default. + * `error`: Google Mock will print errors only (least verbose). + +Alternatively, you can adjust the value of that flag from within your +tests like so: + +``` + ::testing::FLAGS_gmock_verbose = "error"; +``` + +Now, judiciously use the right flag to enable Google Mock serve you better! + +## Gaining Super Vision into Mock Calls ## + +You have a test using Google Mock. It fails: Google Mock tells you +that some expectations aren't satisfied. However, you aren't sure why: +Is there a typo somewhere in the matchers? Did you mess up the order +of the `EXPECT_CALL`s? Or is the code under test doing something +wrong? How can you find out the cause? + +Won't it be nice if you have X-ray vision and can actually see the +trace of all `EXPECT_CALL`s and mock method calls as they are made? +For each call, would you like to see its actual argument values and +which `EXPECT_CALL` Google Mock thinks it matches? + +You can unlock this power by running your test with the +`--gmock_verbose=info` flag. For example, given the test program: + +``` +using testing::_; +using testing::HasSubstr; +using testing::Return; + +class MockFoo { + public: + MOCK_METHOD2(F, void(const string& x, const string& y)); +}; + +TEST(Foo, Bar) { + MockFoo mock; + EXPECT_CALL(mock, F(_, _)).WillRepeatedly(Return()); + EXPECT_CALL(mock, F("a", "b")); + EXPECT_CALL(mock, F("c", HasSubstr("d"))); + + mock.F("a", "good"); + mock.F("a", "b"); +} +``` + +if you run it with `--gmock_verbose=info`, you will see this output: + +``` +[ RUN ] Foo.Bar + +foo_test.cc:14: EXPECT_CALL(mock, F(_, _)) invoked +foo_test.cc:15: EXPECT_CALL(mock, F("a", "b")) invoked +foo_test.cc:16: EXPECT_CALL(mock, F("c", HasSubstr("d"))) invoked +foo_test.cc:14: Mock function call matches EXPECT_CALL(mock, F(_, _))... + Function call: F(@0x7fff7c8dad40"a", @0x7fff7c8dad10"good") +foo_test.cc:15: Mock function call matches EXPECT_CALL(mock, F("a", "b"))... + Function call: F(@0x7fff7c8dada0"a", @0x7fff7c8dad70"b") +foo_test.cc:16: Failure +Actual function call count doesn't match EXPECT_CALL(mock, F("c", HasSubstr("d")))... + Expected: to be called once + Actual: never called - unsatisfied and active +[ FAILED ] Foo.Bar +``` + +Suppose the bug is that the `"c"` in the third `EXPECT_CALL` is a typo +and should actually be `"a"`. With the above message, you should see +that the actual `F("a", "good")` call is matched by the first +`EXPECT_CALL`, not the third as you thought. From that it should be +obvious that the third `EXPECT_CALL` is written wrong. Case solved. + +## Running Tests in Emacs ## + +If you build and run your tests in Emacs, the source file locations of +Google Mock and [Google Test](../../googletest/) +errors will be highlighted. Just press `` on one of them and +you'll be taken to the offending line. Or, you can just type `C-x `` +to jump to the next error. + +To make it even easier, you can add the following lines to your +`~/.emacs` file: + +``` +(global-set-key "\M-m" 'compile) ; m is for make +(global-set-key [M-down] 'next-error) +(global-set-key [M-up] '(lambda () (interactive) (next-error -1))) +``` + +Then you can type `M-m` to start a build, or `M-up`/`M-down` to move +back and forth between errors. + +## Fusing Google Mock Source Files ## + +Google Mock's implementation consists of dozens of files (excluding +its own tests). Sometimes you may want them to be packaged up in +fewer files instead, such that you can easily copy them to a new +machine and start hacking there. For this we provide an experimental +Python script `fuse_gmock_files.py` in the `scripts/` directory +(starting with release 1.2.0). Assuming you have Python 2.4 or above +installed on your machine, just go to that directory and run +``` +python fuse_gmock_files.py OUTPUT_DIR +``` + +and you should see an `OUTPUT_DIR` directory being created with files +`gtest/gtest.h`, `gmock/gmock.h`, and `gmock-gtest-all.cc` in it. +These three files contain everything you need to use Google Mock (and +Google Test). Just copy them to anywhere you want and you are ready +to write tests and use mocks. You can use the +[scrpts/test/Makefile](../scripts/test/Makefile) file as an example on how to compile your tests +against them. + +# Extending Google Mock # + +## Writing New Matchers Quickly ## + +The `MATCHER*` family of macros can be used to define custom matchers +easily. The syntax: + +``` +MATCHER(name, description_string_expression) { statements; } +``` + +will define a matcher with the given name that executes the +statements, which must return a `bool` to indicate if the match +succeeds. Inside the statements, you can refer to the value being +matched by `arg`, and refer to its type by `arg_type`. + +The description string is a `string`-typed expression that documents +what the matcher does, and is used to generate the failure message +when the match fails. It can (and should) reference the special +`bool` variable `negation`, and should evaluate to the description of +the matcher when `negation` is `false`, or that of the matcher's +negation when `negation` is `true`. + +For convenience, we allow the description string to be empty (`""`), +in which case Google Mock will use the sequence of words in the +matcher name as the description. + +For example: +``` +MATCHER(IsDivisibleBy7, "") { return (arg % 7) == 0; } +``` +allows you to write +``` + // Expects mock_foo.Bar(n) to be called where n is divisible by 7. + EXPECT_CALL(mock_foo, Bar(IsDivisibleBy7())); +``` +or, +``` +using ::testing::Not; +... + EXPECT_THAT(some_expression, IsDivisibleBy7()); + EXPECT_THAT(some_other_expression, Not(IsDivisibleBy7())); +``` +If the above assertions fail, they will print something like: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 +... + Value of: some_other_expression + Expected: not (is divisible by 7) + Actual: 21 +``` +where the descriptions `"is divisible by 7"` and `"not (is divisible +by 7)"` are automatically calculated from the matcher name +`IsDivisibleBy7`. + +As you may have noticed, the auto-generated descriptions (especially +those for the negation) may not be so great. You can always override +them with a string expression of your own: +``` +MATCHER(IsDivisibleBy7, std::string(negation ? "isn't" : "is") + + " divisible by 7") { + return (arg % 7) == 0; +} +``` + +Optionally, you can stream additional information to a hidden argument +named `result_listener` to explain the match result. For example, a +better definition of `IsDivisibleBy7` is: +``` +MATCHER(IsDivisibleBy7, "") { + if ((arg % 7) == 0) + return true; + + *result_listener << "the remainder is " << (arg % 7); + return false; +} +``` + +With this definition, the above assertion will give a better message: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 (the remainder is 6) +``` + +You should let `MatchAndExplain()` print _any additional information_ +that can help a user understand the match result. Note that it should +explain why the match succeeds in case of a success (unless it's +obvious) - this is useful when the matcher is used inside +`Not()`. There is no need to print the argument value itself, as +Google Mock already prints it for you. + +**Notes:** + + 1. The type of the value being matched (`arg_type`) is determined by the context in which you use the matcher and is supplied to you by the compiler, so you don't need to worry about declaring it (nor can you). This allows the matcher to be polymorphic. For example, `IsDivisibleBy7()` can be used to match any type where the value of `(arg % 7) == 0` can be implicitly converted to a `bool`. In the `Bar(IsDivisibleBy7())` example above, if method `Bar()` takes an `int`, `arg_type` will be `int`; if it takes an `unsigned long`, `arg_type` will be `unsigned long`; and so on. + 1. Google Mock doesn't guarantee when or how many times a matcher will be invoked. Therefore the matcher logic must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). This requirement must be satisfied no matter how you define the matcher (e.g. using one of the methods described in the following recipes). In particular, a matcher can never call a mock function, as that will affect the state of the mock object and Google Mock. + +## Writing New Parameterized Matchers Quickly ## + +Sometimes you'll want to define a matcher that has parameters. For that you +can use the macro: +``` +MATCHER_P(name, param_name, description_string) { statements; } +``` +where the description string can be either `""` or a string expression +that references `negation` and `param_name`. + +For example: +``` +MATCHER_P(HasAbsoluteValue, value, "") { return abs(arg) == value; } +``` +will allow you to write: +``` + EXPECT_THAT(Blah("a"), HasAbsoluteValue(n)); +``` +which may lead to this message (assuming `n` is 10): +``` + Value of: Blah("a") + Expected: has absolute value 10 + Actual: -9 +``` + +Note that both the matcher description and its parameter are +printed, making the message human-friendly. + +In the matcher definition body, you can write `foo_type` to +reference the type of a parameter named `foo`. For example, in the +body of `MATCHER_P(HasAbsoluteValue, value)` above, you can write +`value_type` to refer to the type of `value`. + +Google Mock also provides `MATCHER_P2`, `MATCHER_P3`, ..., up to +`MATCHER_P10` to support multi-parameter matchers: +``` +MATCHER_Pk(name, param_1, ..., param_k, description_string) { statements; } +``` + +Please note that the custom description string is for a particular +**instance** of the matcher, where the parameters have been bound to +actual values. Therefore usually you'll want the parameter values to +be part of the description. Google Mock lets you do that by +referencing the matcher parameters in the description string +expression. + +For example, +``` + using ::testing::PrintToString; + MATCHER_P2(InClosedRange, low, hi, + std::string(negation ? "isn't" : "is") + " in range [" + + PrintToString(low) + ", " + PrintToString(hi) + "]") { + return low <= arg && arg <= hi; + } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the message: +``` + Expected: is in range [4, 6] +``` + +If you specify `""` as the description, the failure message will +contain the sequence of words in the matcher name followed by the +parameter values printed as a tuple. For example, +``` + MATCHER_P2(InClosedRange, low, hi, "") { ... } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the text: +``` + Expected: in closed range (4, 6) +``` + +For the purpose of typing, you can view +``` +MATCHER_Pk(Foo, p1, ..., pk, description_string) { ... } +``` +as shorthand for +``` +template +FooMatcherPk +Foo(p1_type p1, ..., pk_type pk) { ... } +``` + +When you write `Foo(v1, ..., vk)`, the compiler infers the types of +the parameters `v1`, ..., and `vk` for you. If you are not happy with +the result of the type inference, you can specify the types by +explicitly instantiating the template, as in `Foo(5, false)`. +As said earlier, you don't get to (or need to) specify +`arg_type` as that's determined by the context in which the matcher +is used. + +You can assign the result of expression `Foo(p1, ..., pk)` to a +variable of type `FooMatcherPk`. This can be +useful when composing matchers. Matchers that don't have a parameter +or have only one parameter have special types: you can assign `Foo()` +to a `FooMatcher`-typed variable, and assign `Foo(p)` to a +`FooMatcherP`-typed variable. + +While you can instantiate a matcher template with reference types, +passing the parameters by pointer usually makes your code more +readable. If, however, you still want to pass a parameter by +reference, be aware that in the failure message generated by the +matcher you will see the value of the referenced object but not its +address. + +You can overload matchers with different numbers of parameters: +``` +MATCHER_P(Blah, a, description_string_1) { ... } +MATCHER_P2(Blah, a, b, description_string_2) { ... } +``` + +While it's tempting to always use the `MATCHER*` macros when defining +a new matcher, you should also consider implementing +`MatcherInterface` or using `MakePolymorphicMatcher()` instead (see +the recipes that follow), especially if you need to use the matcher a +lot. While these approaches require more work, they give you more +control on the types of the value being matched and the matcher +parameters, which in general leads to better compiler error messages +that pay off in the long run. They also allow overloading matchers +based on parameter types (as opposed to just based on the number of +parameters). + +## Writing New Monomorphic Matchers ## + +A matcher of argument type `T` implements +`::testing::MatcherInterface` and does two things: it tests whether a +value of type `T` matches the matcher, and can describe what kind of +values it matches. The latter ability is used for generating readable +error messages when expectations are violated. + +The interface looks like this: + +``` +class MatchResultListener { + public: + ... + // Streams x to the underlying ostream; does nothing if the ostream + // is NULL. + template + MatchResultListener& operator<<(const T& x); + + // Returns the underlying ostream. + ::std::ostream* stream(); +}; + +template +class MatcherInterface { + public: + virtual ~MatcherInterface(); + + // Returns true iff the matcher matches x; also explains the match + // result to 'listener'. + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const = 0; + + // Describes this matcher to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; + + // Describes the negation of this matcher to an ostream. + virtual void DescribeNegationTo(::std::ostream* os) const; +}; +``` + +If you need a custom matcher but `Truly()` is not a good option (for +example, you may not be happy with the way `Truly(predicate)` +describes itself, or you may want your matcher to be polymorphic as +`Eq(value)` is), you can define a matcher to do whatever you want in +two steps: first implement the matcher interface, and then define a +factory function to create a matcher instance. The second step is not +strictly needed but it makes the syntax of using the matcher nicer. + +For example, you can define a matcher to test whether an `int` is +divisible by 7 and then use it like this: +``` +using ::testing::MakeMatcher; +using ::testing::Matcher; +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, MatchResultListener* listener) const { + return (n % 7) == 0; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "is divisible by 7"; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "is not divisible by 7"; + } +}; + +inline Matcher DivisibleBy7() { + return MakeMatcher(new DivisibleBy7Matcher); +} +... + + EXPECT_CALL(foo, Bar(DivisibleBy7())); +``` + +You may improve the matcher message by streaming additional +information to the `listener` argument in `MatchAndExplain()`: + +``` +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, + MatchResultListener* listener) const { + const int remainder = n % 7; + if (remainder != 0) { + *listener << "the remainder is " << remainder; + } + return remainder == 0; + } + ... +}; +``` + +Then, `EXPECT_THAT(x, DivisibleBy7());` may general a message like this: +``` +Value of: x +Expected: is divisible by 7 + Actual: 23 (the remainder is 2) +``` + +## Writing New Polymorphic Matchers ## + +You've learned how to write your own matchers in the previous +recipe. Just one problem: a matcher created using `MakeMatcher()` only +works for one particular type of arguments. If you want a +_polymorphic_ matcher that works with arguments of several types (for +instance, `Eq(x)` can be used to match a `value` as long as `value` == +`x` compiles -- `value` and `x` don't have to share the same type), +you can learn the trick from `"gmock/gmock-matchers.h"` but it's a bit +involved. + +Fortunately, most of the time you can define a polymorphic matcher +easily with the help of `MakePolymorphicMatcher()`. Here's how you can +define `NotNull()` as an example: + +``` +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +using ::testing::NotNull; +using ::testing::PolymorphicMatcher; + +class NotNullMatcher { + public: + // To implement a polymorphic matcher, first define a COPYABLE class + // that has three members MatchAndExplain(), DescribeTo(), and + // DescribeNegationTo(), like the following. + + // In this example, we want to use NotNull() with any pointer, so + // MatchAndExplain() accepts a pointer of any type as its first argument. + // In general, you can define MatchAndExplain() as an ordinary method or + // a method template, or even overload it. + template + bool MatchAndExplain(T* p, + MatchResultListener* /* listener */) const { + return p != NULL; + } + + // Describes the property of a value matching this matcher. + void DescribeTo(::std::ostream* os) const { *os << "is not NULL"; } + + // Describes the property of a value NOT matching this matcher. + void DescribeNegationTo(::std::ostream* os) const { *os << "is NULL"; } +}; + +// To construct a polymorphic matcher, pass an instance of the class +// to MakePolymorphicMatcher(). Note the return type. +inline PolymorphicMatcher NotNull() { + return MakePolymorphicMatcher(NotNullMatcher()); +} +... + + EXPECT_CALL(foo, Bar(NotNull())); // The argument must be a non-NULL pointer. +``` + +**Note:** Your polymorphic matcher class does **not** need to inherit from +`MatcherInterface` or any other class, and its methods do **not** need +to be virtual. + +Like in a monomorphic matcher, you may explain the match result by +streaming additional information to the `listener` argument in +`MatchAndExplain()`. + +## Writing New Cardinalities ## + +A cardinality is used in `Times()` to tell Google Mock how many times +you expect a call to occur. It doesn't have to be exact. For example, +you can say `AtLeast(5)` or `Between(2, 4)`. + +If the built-in set of cardinalities doesn't suit you, you are free to +define your own by implementing the following interface (in namespace +`testing`): + +``` +class CardinalityInterface { + public: + virtual ~CardinalityInterface(); + + // Returns true iff call_count calls will satisfy this cardinality. + virtual bool IsSatisfiedByCallCount(int call_count) const = 0; + + // Returns true iff call_count calls will saturate this cardinality. + virtual bool IsSaturatedByCallCount(int call_count) const = 0; + + // Describes self to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; +}; +``` + +For example, to specify that a call must occur even number of times, +you can write + +``` +using ::testing::Cardinality; +using ::testing::CardinalityInterface; +using ::testing::MakeCardinality; + +class EvenNumberCardinality : public CardinalityInterface { + public: + virtual bool IsSatisfiedByCallCount(int call_count) const { + return (call_count % 2) == 0; + } + + virtual bool IsSaturatedByCallCount(int call_count) const { + return false; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "called even number of times"; + } +}; + +Cardinality EvenNumber() { + return MakeCardinality(new EvenNumberCardinality); +} +... + + EXPECT_CALL(foo, Bar(3)) + .Times(EvenNumber()); +``` + +## Writing New Actions Quickly ## + +If the built-in actions don't work for you, and you find it +inconvenient to use `Invoke()`, you can use a macro from the `ACTION*` +family to quickly define a new action that can be used in your code as +if it's a built-in action. + +By writing +``` +ACTION(name) { statements; } +``` +in a namespace scope (i.e. not inside a class or function), you will +define an action with the given name that executes the statements. +The value returned by `statements` will be used as the return value of +the action. Inside the statements, you can refer to the K-th +(0-based) argument of the mock function as `argK`. For example: +``` +ACTION(IncrementArg1) { return ++(*arg1); } +``` +allows you to write +``` +... WillOnce(IncrementArg1()); +``` + +Note that you don't need to specify the types of the mock function +arguments. Rest assured that your code is type-safe though: +you'll get a compiler error if `*arg1` doesn't support the `++` +operator, or if the type of `++(*arg1)` isn't compatible with the mock +function's return type. + +Another example: +``` +ACTION(Foo) { + (*arg2)(5); + Blah(); + *arg1 = 0; + return arg0; +} +``` +defines an action `Foo()` that invokes argument #2 (a function pointer) +with 5, calls function `Blah()`, sets the value pointed to by argument +#1 to 0, and returns argument #0. + +For more convenience and flexibility, you can also use the following +pre-defined symbols in the body of `ACTION`: + +| `argK_type` | The type of the K-th (0-based) argument of the mock function | +|:------------|:-------------------------------------------------------------| +| `args` | All arguments of the mock function as a tuple | +| `args_type` | The type of all arguments of the mock function as a tuple | +| `return_type` | The return type of the mock function | +| `function_type` | The type of the mock function | + +For example, when using an `ACTION` as a stub action for mock function: +``` +int DoSomething(bool flag, int* ptr); +``` +we have: +| **Pre-defined Symbol** | **Is Bound To** | +|:-----------------------|:----------------| +| `arg0` | the value of `flag` | +| `arg0_type` | the type `bool` | +| `arg1` | the value of `ptr` | +| `arg1_type` | the type `int*` | +| `args` | the tuple `(flag, ptr)` | +| `args_type` | the type `::testing::tuple` | +| `return_type` | the type `int` | +| `function_type` | the type `int(bool, int*)` | + +## Writing New Parameterized Actions Quickly ## + +Sometimes you'll want to parameterize an action you define. For that +we have another macro +``` +ACTION_P(name, param) { statements; } +``` + +For example, +``` +ACTION_P(Add, n) { return arg0 + n; } +``` +will allow you to write +``` +// Returns argument #0 + 5. +... WillOnce(Add(5)); +``` + +For convenience, we use the term _arguments_ for the values used to +invoke the mock function, and the term _parameters_ for the values +used to instantiate an action. + +Note that you don't need to provide the type of the parameter either. +Suppose the parameter is named `param`, you can also use the +Google-Mock-defined symbol `param_type` to refer to the type of the +parameter as inferred by the compiler. For example, in the body of +`ACTION_P(Add, n)` above, you can write `n_type` for the type of `n`. + +Google Mock also provides `ACTION_P2`, `ACTION_P3`, and etc to support +multi-parameter actions. For example, +``` +ACTION_P2(ReturnDistanceTo, x, y) { + double dx = arg0 - x; + double dy = arg1 - y; + return sqrt(dx*dx + dy*dy); +} +``` +lets you write +``` +... WillOnce(ReturnDistanceTo(5.0, 26.5)); +``` + +You can view `ACTION` as a degenerated parameterized action where the +number of parameters is 0. + +You can also easily define actions overloaded on the number of parameters: +``` +ACTION_P(Plus, a) { ... } +ACTION_P2(Plus, a, b) { ... } +``` + +## Restricting the Type of an Argument or Parameter in an ACTION ## + +For maximum brevity and reusability, the `ACTION*` macros don't ask +you to provide the types of the mock function arguments and the action +parameters. Instead, we let the compiler infer the types for us. + +Sometimes, however, we may want to be more explicit about the types. +There are several tricks to do that. For example: +``` +ACTION(Foo) { + // Makes sure arg0 can be converted to int. + int n = arg0; + ... use n instead of arg0 here ... +} + +ACTION_P(Bar, param) { + // Makes sure the type of arg1 is const char*. + ::testing::StaticAssertTypeEq(); + + // Makes sure param can be converted to bool. + bool flag = param; +} +``` +where `StaticAssertTypeEq` is a compile-time assertion in Google Test +that verifies two types are the same. + +## Writing New Action Templates Quickly ## + +Sometimes you want to give an action explicit template parameters that +cannot be inferred from its value parameters. `ACTION_TEMPLATE()` +supports that and can be viewed as an extension to `ACTION()` and +`ACTION_P*()`. + +The syntax: +``` +ACTION_TEMPLATE(ActionName, + HAS_m_TEMPLATE_PARAMS(kind1, name1, ..., kind_m, name_m), + AND_n_VALUE_PARAMS(p1, ..., p_n)) { statements; } +``` + +defines an action template that takes _m_ explicit template parameters +and _n_ value parameters, where _m_ is between 1 and 10, and _n_ is +between 0 and 10. `name_i` is the name of the i-th template +parameter, and `kind_i` specifies whether it's a `typename`, an +integral constant, or a template. `p_i` is the name of the i-th value +parameter. + +Example: +``` +// DuplicateArg(output) converts the k-th argument of the mock +// function to type T and copies it to *output. +ACTION_TEMPLATE(DuplicateArg, + // Note the comma between int and k: + HAS_2_TEMPLATE_PARAMS(int, k, typename, T), + AND_1_VALUE_PARAMS(output)) { + *output = T(::testing::get(args)); +} +``` + +To create an instance of an action template, write: +``` + ActionName(v1, ..., v_n) +``` +where the `t`s are the template arguments and the +`v`s are the value arguments. The value argument +types are inferred by the compiler. For example: +``` +using ::testing::_; +... + int n; + EXPECT_CALL(mock, Foo(_, _)) + .WillOnce(DuplicateArg<1, unsigned char>(&n)); +``` + +If you want to explicitly specify the value argument types, you can +provide additional template arguments: +``` + ActionName(v1, ..., v_n) +``` +where `u_i` is the desired type of `v_i`. + +`ACTION_TEMPLATE` and `ACTION`/`ACTION_P*` can be overloaded on the +number of value parameters, but not on the number of template +parameters. Without the restriction, the meaning of the following is +unclear: + +``` + OverloadedAction(x); +``` + +Are we using a single-template-parameter action where `bool` refers to +the type of `x`, or a two-template-parameter action where the compiler +is asked to infer the type of `x`? + +## Using the ACTION Object's Type ## + +If you are writing a function that returns an `ACTION` object, you'll +need to know its type. The type depends on the macro used to define +the action and the parameter types. The rule is relatively simple: +| **Given Definition** | **Expression** | **Has Type** | +|:---------------------|:---------------|:-------------| +| `ACTION(Foo)` | `Foo()` | `FooAction` | +| `ACTION_TEMPLATE(Foo, HAS_m_TEMPLATE_PARAMS(...), AND_0_VALUE_PARAMS())` | `Foo()` | `FooAction` | +| `ACTION_P(Bar, param)` | `Bar(int_value)` | `BarActionP` | +| `ACTION_TEMPLATE(Bar, HAS_m_TEMPLATE_PARAMS(...), AND_1_VALUE_PARAMS(p1))` | `Bar(int_value)` | `FooActionP` | +| `ACTION_P2(Baz, p1, p2)` | `Baz(bool_value, int_value)` | `BazActionP2` | +| `ACTION_TEMPLATE(Baz, HAS_m_TEMPLATE_PARAMS(...), AND_2_VALUE_PARAMS(p1, p2))` | `Baz(bool_value, int_value)` | `FooActionP2` | +| ... | ... | ... | + +Note that we have to pick different suffixes (`Action`, `ActionP`, +`ActionP2`, and etc) for actions with different numbers of value +parameters, or the action definitions cannot be overloaded on the +number of them. + +## Writing New Monomorphic Actions ## + +While the `ACTION*` macros are very convenient, sometimes they are +inappropriate. For example, despite the tricks shown in the previous +recipes, they don't let you directly specify the types of the mock +function arguments and the action parameters, which in general leads +to unoptimized compiler error messages that can baffle unfamiliar +users. They also don't allow overloading actions based on parameter +types without jumping through some hoops. + +An alternative to the `ACTION*` macros is to implement +`::testing::ActionInterface`, where `F` is the type of the mock +function in which the action will be used. For example: + +``` +template class ActionInterface { + public: + virtual ~ActionInterface(); + + // Performs the action. Result is the return type of function type + // F, and ArgumentTuple is the tuple of arguments of F. + // + // For example, if F is int(bool, const string&), then Result would + // be int, and ArgumentTuple would be ::testing::tuple. + virtual Result Perform(const ArgumentTuple& args) = 0; +}; + +using ::testing::_; +using ::testing::Action; +using ::testing::ActionInterface; +using ::testing::MakeAction; + +typedef int IncrementMethod(int*); + +class IncrementArgumentAction : public ActionInterface { + public: + virtual int Perform(const ::testing::tuple& args) { + int* p = ::testing::get<0>(args); // Grabs the first argument. + return *p++; + } +}; + +Action IncrementArgument() { + return MakeAction(new IncrementArgumentAction); +} +... + + EXPECT_CALL(foo, Baz(_)) + .WillOnce(IncrementArgument()); + + int n = 5; + foo.Baz(&n); // Should return 5 and change n to 6. +``` + +## Writing New Polymorphic Actions ## + +The previous recipe showed you how to define your own action. This is +all good, except that you need to know the type of the function in +which the action will be used. Sometimes that can be a problem. For +example, if you want to use the action in functions with _different_ +types (e.g. like `Return()` and `SetArgPointee()`). + +If an action can be used in several types of mock functions, we say +it's _polymorphic_. The `MakePolymorphicAction()` function template +makes it easy to define such an action: + +``` +namespace testing { + +template +PolymorphicAction MakePolymorphicAction(const Impl& impl); + +} // namespace testing +``` + +As an example, let's define an action that returns the second argument +in the mock function's argument list. The first step is to define an +implementation class: + +``` +class ReturnSecondArgumentAction { + public: + template + Result Perform(const ArgumentTuple& args) const { + // To get the i-th (0-based) argument, use ::testing::get(args). + return ::testing::get<1>(args); + } +}; +``` + +This implementation class does _not_ need to inherit from any +particular class. What matters is that it must have a `Perform()` +method template. This method template takes the mock function's +arguments as a tuple in a **single** argument, and returns the result of +the action. It can be either `const` or not, but must be invokable +with exactly one template argument, which is the result type. In other +words, you must be able to call `Perform(args)` where `R` is the +mock function's return type and `args` is its arguments in a tuple. + +Next, we use `MakePolymorphicAction()` to turn an instance of the +implementation class into the polymorphic action we need. It will be +convenient to have a wrapper for this: + +``` +using ::testing::MakePolymorphicAction; +using ::testing::PolymorphicAction; + +PolymorphicAction ReturnSecondArgument() { + return MakePolymorphicAction(ReturnSecondArgumentAction()); +} +``` + +Now, you can use this polymorphic action the same way you use the +built-in ones: + +``` +using ::testing::_; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, int(bool flag, int n)); + MOCK_METHOD3(DoThat, string(int x, const char* str1, const char* str2)); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(ReturnSecondArgument()); + EXPECT_CALL(foo, DoThat(_, _, _)) + .WillOnce(ReturnSecondArgument()); + ... + foo.DoThis(true, 5); // Will return 5. + foo.DoThat(1, "Hi", "Bye"); // Will return "Hi". +``` + +## Teaching Google Mock How to Print Your Values ## + +When an uninteresting or unexpected call occurs, Google Mock prints the +argument values and the stack trace to help you debug. Assertion +macros like `EXPECT_THAT` and `EXPECT_EQ` also print the values in +question when the assertion fails. Google Mock and Google Test do this using +Google Test's user-extensible value printer. + +This printer knows how to print built-in C++ types, native arrays, STL +containers, and any type that supports the `<<` operator. For other +types, it prints the raw bytes in the value and hopes that you the +user can figure it out. +[Google Test's advanced guide](../../googletest/docs/AdvancedGuide.md#teaching-google-test-how-to-print-your-values) +explains how to extend the printer to do a better job at +printing your particular type than to dump the bytes. diff --git a/googlemock/docs/DesignDoc.md b/googlemock/docs/DesignDoc.md new file mode 100644 index 0000000..3f515c3 --- /dev/null +++ b/googlemock/docs/DesignDoc.md @@ -0,0 +1,280 @@ +This page discusses the design of new Google Mock features. + + + +# Macros for Defining Actions # + +## Problem ## + +Due to the lack of closures in C++, it currently requires some +non-trivial effort to define a custom action in Google Mock. For +example, suppose you want to "increment the value pointed to by the +second argument of the mock function and return it", you could write: + +``` +int IncrementArg1(Unused, int* p, Unused) { + return ++(*p); +} + +... WillOnce(Invoke(IncrementArg1)); +``` + +There are several things unsatisfactory about this approach: + + * Even though the action only cares about the second argument of the mock function, its definition needs to list other arguments as dummies. This is tedious. + * The defined action is usable only in mock functions that takes exactly 3 arguments - an unnecessary restriction. + * To use the action, one has to say `Invoke(IncrementArg1)`, which isn't as nice as `IncrementArg1()`. + +The latter two problems can be overcome using `MakePolymorphicAction()`, +but it requires much more boilerplate code: + +``` +class IncrementArg1Action { + public: + template + Result Perform(const ArgumentTuple& args) const { + return ++(*tr1::get<1>(args)); + } +}; + +PolymorphicAction IncrementArg1() { + return MakePolymorphicAction(IncrementArg1Action()); +} + +... WillOnce(IncrementArg1()); +``` + +Our goal is to allow defining custom actions with the least amount of +boiler-plate C++ requires. + +## Solution ## + +We propose to introduce a new macro: +``` +ACTION(name) { statements; } +``` + +Using this in a namespace scope will define an action with the given +name that executes the statements. Inside the statements, you can +refer to the K-th (0-based) argument of the mock function as `argK`. +For example: +``` +ACTION(IncrementArg1) { return ++(*arg1); } +``` +allows you to write +``` +... WillOnce(IncrementArg1()); +``` + +Note that you don't need to specify the types of the mock function +arguments, as brevity is a top design goal here. Rest assured that +your code is still type-safe though: you'll get a compiler error if +`*arg1` doesn't support the `++` operator, or if the type of +`++(*arg1)` isn't compatible with the mock function's return type. + +Another example: +``` +ACTION(Foo) { + (*arg2)(5); + Blah(); + *arg1 = 0; + return arg0; +} +``` +defines an action `Foo()` that invokes argument #2 (a function pointer) +with 5, calls function `Blah()`, sets the value pointed to by argument +#1 to 0, and returns argument #0. + +For more convenience and flexibility, you can also use the following +pre-defined symbols in the body of `ACTION`: + +| `argK_type` | The type of the K-th (0-based) argument of the mock function | +|:------------|:-------------------------------------------------------------| +| `args` | All arguments of the mock function as a tuple | +| `args_type` | The type of all arguments of the mock function as a tuple | +| `return_type` | The return type of the mock function | +| `function_type` | The type of the mock function | + +For example, when using an `ACTION` as a stub action for mock function: +``` +int DoSomething(bool flag, int* ptr); +``` +we have: +| **Pre-defined Symbol** | **Is Bound To** | +|:-----------------------|:----------------| +| `arg0` | the value of `flag` | +| `arg0_type` | the type `bool` | +| `arg1` | the value of `ptr` | +| `arg1_type` | the type `int*` | +| `args` | the tuple `(flag, ptr)` | +| `args_type` | the type `std::tr1::tuple` | +| `return_type` | the type `int` | +| `function_type` | the type `int(bool, int*)` | + +## Parameterized actions ## + +Sometimes you'll want to parameterize the action. For that we propose +another macro +``` +ACTION_P(name, param) { statements; } +``` + +For example, +``` +ACTION_P(Add, n) { return arg0 + n; } +``` +will allow you to write +``` +// Returns argument #0 + 5. +... WillOnce(Add(5)); +``` + +For convenience, we use the term _arguments_ for the values used to +invoke the mock function, and the term _parameters_ for the values +used to instantiate an action. + +Note that you don't need to provide the type of the parameter either. +Suppose the parameter is named `param`, you can also use the +Google-Mock-defined symbol `param_type` to refer to the type of the +parameter as inferred by the compiler. + +We will also provide `ACTION_P2`, `ACTION_P3`, and etc to support +multi-parameter actions. For example, +``` +ACTION_P2(ReturnDistanceTo, x, y) { + double dx = arg0 - x; + double dy = arg1 - y; + return sqrt(dx*dx + dy*dy); +} +``` +lets you write +``` +... WillOnce(ReturnDistanceTo(5.0, 26.5)); +``` + +You can view `ACTION` as a degenerated parameterized action where the +number of parameters is 0. + +## Advanced Usages ## + +### Overloading Actions ### + +You can easily define actions overloaded on the number of parameters: +``` +ACTION_P(Plus, a) { ... } +ACTION_P2(Plus, a, b) { ... } +``` + +### Restricting the Type of an Argument or Parameter ### + +For maximum brevity and reusability, the `ACTION*` macros don't let +you specify the types of the mock function arguments and the action +parameters. Instead, we let the compiler infer the types for us. + +Sometimes, however, we may want to be more explicit about the types. +There are several tricks to do that. For example: +``` +ACTION(Foo) { + // Makes sure arg0 can be converted to int. + int n = arg0; + ... use n instead of arg0 here ... +} + +ACTION_P(Bar, param) { + // Makes sure the type of arg1 is const char*. + ::testing::StaticAssertTypeEq(); + + // Makes sure param can be converted to bool. + bool flag = param; +} +``` +where `StaticAssertTypeEq` is a compile-time assertion we plan to add to +Google Test (the name is chosen to match `static_assert` in C++0x). + +### Using the ACTION Object's Type ### + +If you are writing a function that returns an `ACTION` object, you'll +need to know its type. The type depends on the macro used to define +the action and the parameter types. The rule is relatively simple: +| **Given Definition** | **Expression** | **Has Type** | +|:---------------------|:---------------|:-------------| +| `ACTION(Foo)` | `Foo()` | `FooAction` | +| `ACTION_P(Bar, param)` | `Bar(int_value)` | `BarActionP` | +| `ACTION_P2(Baz, p1, p2)` | `Baz(bool_value, int_value)` | `BazActionP2` | +| ... | ... | ... | + +Note that we have to pick different suffixes (`Action`, `ActionP`, +`ActionP2`, and etc) for actions with different numbers of parameters, +or the action definitions cannot be overloaded on the number of +parameters. + +## When to Use ## + +While the new macros are very convenient, please also consider other +means of implementing actions (e.g. via `ActionInterface` or +`MakePolymorphicAction()`), especially if you need to use the defined +action a lot. While the other approaches require more work, they give +you more control on the types of the mock function arguments and the +action parameters, which in general leads to better compiler error +messages that pay off in the long run. They also allow overloading +actions based on parameter types, as opposed to just the number of +parameters. + +## Related Work ## + +As you may have realized, the `ACTION*` macros resemble closures (also +known as lambda expressions or anonymous functions). Indeed, both of +them seek to lower the syntactic overhead for defining a function. + +C++0x will support lambdas, but they are not part of C++ right now. +Some non-standard libraries (most notably BLL or Boost Lambda Library) +try to alleviate this problem. However, they are not a good choice +for defining actions as: + + * They are non-standard and not widely installed. Google Mock only depends on standard libraries and `tr1::tuple`, which is part of the new C++ standard and comes with gcc 4+. We want to keep it that way. + * They are not trivial to learn. + * They will become obsolete when C++0x's lambda feature is widely supported. We don't want to make our users use a dying library. + * Since they are based on operators, they are rather ad hoc: you cannot use statements, and you cannot pass the lambda arguments to a function, for example. + * They have subtle semantics that easily confuses new users. For example, in expression `_1++ + foo++`, `foo` will be incremented only once where the expression is evaluated, while `_1` will be incremented every time the unnamed function is invoked. This is far from intuitive. + +`ACTION*` avoid all these problems. + +## Future Improvements ## + +There may be a need for composing `ACTION*` definitions (i.e. invoking +another `ACTION` inside the definition of one `ACTION*`). We are not +sure we want it yet, as one can get a similar effect by putting +`ACTION` definitions in function templates and composing the function +templates. We'll revisit this based on user feedback. + +The reason we don't allow `ACTION*()` inside a function body is that +the current C++ standard doesn't allow function-local types to be used +to instantiate templates. The upcoming C++0x standard will lift this +restriction. Once this feature is widely supported by compilers, we +can revisit the implementation and add support for using `ACTION*()` +inside a function. + +C++0x will also support lambda expressions. When they become +available, we may want to support using lambdas as actions. + +# Macros for Defining Matchers # + +Once the macros for defining actions are implemented, we plan to do +the same for matchers: + +``` +MATCHER(name) { statements; } +``` + +where you can refer to the value being matched as `arg`. For example, +given: + +``` +MATCHER(IsPositive) { return arg > 0; } +``` + +you can use `IsPositive()` as a matcher that matches a value iff it is +greater than 0. + +We will also add `MATCHER_P`, `MATCHER_P2`, and etc for parameterized +matchers. \ No newline at end of file diff --git a/googlemock/docs/DevGuide.md b/googlemock/docs/DevGuide.md new file mode 100644 index 0000000..f4bab75 --- /dev/null +++ b/googlemock/docs/DevGuide.md @@ -0,0 +1,132 @@ + + +If you are interested in understanding the internals of Google Mock, +building from source, or contributing ideas or modifications to the +project, then this document is for you. + +# Introduction # + +First, let's give you some background of the project. + +## Licensing ## + +All Google Mock source and pre-built packages are provided under the [New BSD License](http://www.opensource.org/licenses/bsd-license.php). + +## The Google Mock Community ## + +The Google Mock community exists primarily through the [discussion group](http://groups.google.com/group/googlemock), the +[issue tracker](https://github.com/google/googletest/issues) and, to a lesser extent, the [source control repository](../). You are definitely encouraged to contribute to the +discussion and you can also help us to keep the effectiveness of the +group high by following and promoting the guidelines listed here. + +### Please Be Friendly ### + +Showing courtesy and respect to others is a vital part of the Google +culture, and we strongly encourage everyone participating in Google +Mock development to join us in accepting nothing less. Of course, +being courteous is not the same as failing to constructively disagree +with each other, but it does mean that we should be respectful of each +other when enumerating the 42 technical reasons that a particular +proposal may not be the best choice. There's never a reason to be +antagonistic or dismissive toward anyone who is sincerely trying to +contribute to a discussion. + +Sure, C++ testing is serious business and all that, but it's also +a lot of fun. Let's keep it that way. Let's strive to be one of the +friendliest communities in all of open source. + +### Where to Discuss Google Mock ### + +As always, discuss Google Mock in the official [Google C++ Mocking Framework discussion group](http://groups.google.com/group/googlemock). You don't have to actually submit +code in order to sign up. Your participation itself is a valuable +contribution. + +# Working with the Code # + +If you want to get your hands dirty with the code inside Google Mock, +this is the section for you. + +## Checking Out the Source from Subversion ## + +Checking out the Google Mock source is most useful if you plan to +tweak it yourself. You check out the source for Google Mock using a +[Subversion](http://subversion.tigris.org/) client as you would for any +other project hosted on Google Code. Please see the instruction on +the [source code access page](../) for how to do it. + +## Compiling from Source ## + +Once you check out the code, you can find instructions on how to +compile it in the [README](../README.md) file. + +## Testing ## + +A mocking framework is of no good if itself is not thoroughly tested. +Tests should be written for any new code, and changes should be +verified to not break existing tests before they are submitted for +review. To perform the tests, follow the instructions in [README](http://code.google.com/p/googlemock/source/browse/trunk/README) and +verify that there are no failures. + +# Contributing Code # + +We are excited that Google Mock is now open source, and hope to get +great patches from the community. Before you fire up your favorite IDE +and begin hammering away at that new feature, though, please take the +time to read this section and understand the process. While it seems +rigorous, we want to keep a high standard of quality in the code +base. + +## Contributor License Agreements ## + +You must sign a Contributor License Agreement (CLA) before we can +accept any code. The CLA protects you and us. + + * If you are an individual writing original source code and you're sure you own the intellectual property, then you'll need to sign an [individual CLA](http://code.google.com/legal/individual-cla-v1.0.html). + * If you work for a company that wants to allow you to contribute your work to Google Mock, then you'll need to sign a [corporate CLA](http://code.google.com/legal/corporate-cla-v1.0.html). + +Follow either of the two links above to access the appropriate CLA and +instructions for how to sign and return it. + +## Coding Style ## + +To keep the source consistent, readable, diffable and easy to merge, +we use a fairly rigid coding style, as defined by the [google-styleguide](https://github.com/google/styleguide) project. All patches will be expected +to conform to the style outlined [here](https://github.com/google/styleguide/blob/gh-pages/cppguide.xml). + +## Submitting Patches ## + +Please do submit code. Here's what you need to do: + + 1. Normally you should make your change against the SVN trunk instead of a branch or a tag, as the latter two are for release control and should be treated mostly as read-only. + 1. Decide which code you want to submit. A submission should be a set of changes that addresses one issue in the [Google Mock issue tracker](http://code.google.com/p/googlemock/issues/list). Please don't mix more than one logical change per submittal, because it makes the history hard to follow. If you want to make a change that doesn't have a corresponding issue in the issue tracker, please create one. + 1. Also, coordinate with team members that are listed on the issue in question. This ensures that work isn't being duplicated and communicating your plan early also generally leads to better patches. + 1. Ensure that your code adheres to the [Google Mock source code style](#Coding_Style.md). + 1. Ensure that there are unit tests for your code. + 1. Sign a Contributor License Agreement. + 1. Create a patch file using `svn diff`. + 1. We use [Rietveld](http://codereview.appspot.com/) to do web-based code reviews. You can read about the tool [here](https://github.com/rietveld-codereview/rietveld/wiki). When you are ready, upload your patch via Rietveld and notify `googlemock@googlegroups.com` to review it. There are several ways to upload the patch. We recommend using the [upload\_gmock.py](../scripts/upload_gmock.py) script, which you can find in the `scripts/` folder in the SVN trunk. + +## Google Mock Committers ## + +The current members of the Google Mock engineering team are the only +committers at present. In the great tradition of eating one's own +dogfood, we will be requiring each new Google Mock engineering team +member to earn the right to become a committer by following the +procedures in this document, writing consistently great code, and +demonstrating repeatedly that he or she truly gets the zen of Google +Mock. + +# Release Process # + +We follow the typical release process for Subversion-based projects: + + 1. A release branch named `release-X.Y` is created. + 1. Bugs are fixed and features are added in trunk; those individual patches are merged into the release branch until it's stable. + 1. An individual point release (the `Z` in `X.Y.Z`) is made by creating a tag from the branch. + 1. Repeat steps 2 and 3 throughout one release cycle (as determined by features or time). + 1. Go back to step 1 to create another release branch and so on. + + +--- + +This page is based on the [Making GWT Better](http://code.google.com/webtoolkit/makinggwtbetter.html) guide from the [Google Web Toolkit](http://code.google.com/webtoolkit/) project. Except as otherwise [noted](http://code.google.com/policies.html#restrictions), the content of this page is licensed under the [Creative Commons Attribution 2.5 License](http://creativecommons.org/licenses/by/2.5/). diff --git a/googlemock/docs/Documentation.md b/googlemock/docs/Documentation.md new file mode 100644 index 0000000..444151e --- /dev/null +++ b/googlemock/docs/Documentation.md @@ -0,0 +1,12 @@ +This page lists all documentation wiki pages for Google Mock **(the SVN trunk version)** +- **if you use a released version of Google Mock, please read the documentation for that specific version instead.** + + * [ForDummies](ForDummies.md) -- start here if you are new to Google Mock. + * [CheatSheet](CheatSheet.md) -- a quick reference. + * [CookBook](CookBook.md) -- recipes for doing various tasks using Google Mock. + * [FrequentlyAskedQuestions](FrequentlyAskedQuestions.md) -- check here before asking a question on the mailing list. + +To contribute code to Google Mock, read: + + * [DevGuide](DevGuide.md) -- read this _before_ writing your first patch. + * [Pump Manual](../googletest/docs/PumpManual.md) -- how we generate some of Google Mock's source files. diff --git a/googlemock/docs/ForDummies.md b/googlemock/docs/ForDummies.md new file mode 100644 index 0000000..0da4cbe --- /dev/null +++ b/googlemock/docs/ForDummies.md @@ -0,0 +1,439 @@ + + +(**Note:** If you get compiler errors that you don't understand, be sure to consult [Google Mock Doctor](FrequentlyAskedQuestions.md#how-am-i-supposed-to-make-sense-of-these-horrible-template-errors).) + +# What Is Google C++ Mocking Framework? # +When you write a prototype or test, often it's not feasible or wise to rely on real objects entirely. A **mock object** implements the same interface as a real object (so it can be used as one), but lets you specify at run time how it will be used and what it should do (which methods will be called? in which order? how many times? with what arguments? what will they return? etc). + +**Note:** It is easy to confuse the term _fake objects_ with mock objects. Fakes and mocks actually mean very different things in the Test-Driven Development (TDD) community: + + * **Fake** objects have working implementations, but usually take some shortcut (perhaps to make the operations less expensive), which makes them not suitable for production. An in-memory file system would be an example of a fake. + * **Mocks** are objects pre-programmed with _expectations_, which form a specification of the calls they are expected to receive. + +If all this seems too abstract for you, don't worry - the most important thing to remember is that a mock allows you to check the _interaction_ between itself and code that uses it. The difference between fakes and mocks will become much clearer once you start to use mocks. + +**Google C++ Mocking Framework** (or **Google Mock** for short) is a library (sometimes we also call it a "framework" to make it sound cool) for creating mock classes and using them. It does to C++ what [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/) do to Java. + +Using Google Mock involves three basic steps: + + 1. Use some simple macros to describe the interface you want to mock, and they will expand to the implementation of your mock class; + 1. Create some mock objects and specify its expectations and behavior using an intuitive syntax; + 1. Exercise code that uses the mock objects. Google Mock will catch any violation of the expectations as soon as it arises. + +# Why Google Mock? # +While mock objects help you remove unnecessary dependencies in tests and make them fast and reliable, using mocks manually in C++ is _hard_: + + * Someone has to implement the mocks. The job is usually tedious and error-prone. No wonder people go great distance to avoid it. + * The quality of those manually written mocks is a bit, uh, unpredictable. You may see some really polished ones, but you may also see some that were hacked up in a hurry and have all sorts of ad hoc restrictions. + * The knowledge you gained from using one mock doesn't transfer to the next. + +In contrast, Java and Python programmers have some fine mock frameworks, which automate the creation of mocks. As a result, mocking is a proven effective technique and widely adopted practice in those communities. Having the right tool absolutely makes the difference. + +Google Mock was built to help C++ programmers. It was inspired by [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/), but designed with C++'s specifics in mind. It is your friend if any of the following problems is bothering you: + + * You are stuck with a sub-optimal design and wish you had done more prototyping before it was too late, but prototyping in C++ is by no means "rapid". + * Your tests are slow as they depend on too many libraries or use expensive resources (e.g. a database). + * Your tests are brittle as some resources they use are unreliable (e.g. the network). + * You want to test how your code handles a failure (e.g. a file checksum error), but it's not easy to cause one. + * You need to make sure that your module interacts with other modules in the right way, but it's hard to observe the interaction; therefore you resort to observing the side effects at the end of the action, which is awkward at best. + * You want to "mock out" your dependencies, except that they don't have mock implementations yet; and, frankly, you aren't thrilled by some of those hand-written mocks. + +We encourage you to use Google Mock as: + + * a _design_ tool, for it lets you experiment with your interface design early and often. More iterations lead to better designs! + * a _testing_ tool to cut your tests' outbound dependencies and probe the interaction between your module and its collaborators. + +# Getting Started # +Using Google Mock is easy! Inside your C++ source file, just `#include` `"gtest/gtest.h"` and `"gmock/gmock.h"`, and you are ready to go. + +# A Case for Mock Turtles # +Let's look at an example. Suppose you are developing a graphics program that relies on a LOGO-like API for drawing. How would you test that it does the right thing? Well, you can run it and compare the screen with a golden screen snapshot, but let's admit it: tests like this are expensive to run and fragile (What if you just upgraded to a shiny new graphics card that has better anti-aliasing? Suddenly you have to update all your golden images.). It would be too painful if all your tests are like this. Fortunately, you learned about Dependency Injection and know the right thing to do: instead of having your application talk to the drawing API directly, wrap the API in an interface (say, `Turtle`) and code to that interface: + +``` +class Turtle { + ... + virtual ~Turtle() {} + virtual void PenUp() = 0; + virtual void PenDown() = 0; + virtual void Forward(int distance) = 0; + virtual void Turn(int degrees) = 0; + virtual void GoTo(int x, int y) = 0; + virtual int GetX() const = 0; + virtual int GetY() const = 0; +}; +``` + +(Note that the destructor of `Turtle` **must** be virtual, as is the case for **all** classes you intend to inherit from - otherwise the destructor of the derived class will not be called when you delete an object through a base pointer, and you'll get corrupted program states like memory leaks.) + +You can control whether the turtle's movement will leave a trace using `PenUp()` and `PenDown()`, and control its movement using `Forward()`, `Turn()`, and `GoTo()`. Finally, `GetX()` and `GetY()` tell you the current position of the turtle. + +Your program will normally use a real implementation of this interface. In tests, you can use a mock implementation instead. This allows you to easily check what drawing primitives your program is calling, with what arguments, and in which order. Tests written this way are much more robust (they won't break because your new machine does anti-aliasing differently), easier to read and maintain (the intent of a test is expressed in the code, not in some binary images), and run _much, much faster_. + +# Writing the Mock Class # +If you are lucky, the mocks you need to use have already been implemented by some nice people. If, however, you find yourself in the position to write a mock class, relax - Google Mock turns this task into a fun game! (Well, almost.) + +## How to Define It ## +Using the `Turtle` interface as example, here are the simple steps you need to follow: + + 1. Derive a class `MockTurtle` from `Turtle`. + 1. Take a _virtual_ function of `Turtle` (while it's possible to [mock non-virtual methods using templates](CookBook.md#mocking-nonvirtual-methods), it's much more involved). Count how many arguments it has. + 1. In the `public:` section of the child class, write `MOCK_METHODn();` (or `MOCK_CONST_METHODn();` if you are mocking a `const` method), where `n` is the number of the arguments; if you counted wrong, shame on you, and a compiler error will tell you so. + 1. Now comes the fun part: you take the function signature, cut-and-paste the _function name_ as the _first_ argument to the macro, and leave what's left as the _second_ argument (in case you're curious, this is the _type of the function_). + 1. Repeat until all virtual functions you want to mock are done. + +After the process, you should have something like: + +``` +#include "gmock/gmock.h" // Brings in Google Mock. +class MockTurtle : public Turtle { + public: + ... + MOCK_METHOD0(PenUp, void()); + MOCK_METHOD0(PenDown, void()); + MOCK_METHOD1(Forward, void(int distance)); + MOCK_METHOD1(Turn, void(int degrees)); + MOCK_METHOD2(GoTo, void(int x, int y)); + MOCK_CONST_METHOD0(GetX, int()); + MOCK_CONST_METHOD0(GetY, int()); +}; +``` + +You don't need to define these mock methods somewhere else - the `MOCK_METHOD*` macros will generate the definitions for you. It's that simple! Once you get the hang of it, you can pump out mock classes faster than your source-control system can handle your check-ins. + +**Tip:** If even this is too much work for you, you'll find the +`gmock_gen.py` tool in Google Mock's `scripts/generator/` directory (courtesy of the [cppclean](http://code.google.com/p/cppclean/) project) useful. This command-line +tool requires that you have Python 2.4 installed. You give it a C++ file and the name of an abstract class defined in it, +and it will print the definition of the mock class for you. Due to the +complexity of the C++ language, this script may not always work, but +it can be quite handy when it does. For more details, read the [user documentation](../scripts/generator/README). + +## Where to Put It ## +When you define a mock class, you need to decide where to put its definition. Some people put it in a `*_test.cc`. This is fine when the interface being mocked (say, `Foo`) is owned by the same person or team. Otherwise, when the owner of `Foo` changes it, your test could break. (You can't really expect `Foo`'s maintainer to fix every test that uses `Foo`, can you?) + +So, the rule of thumb is: if you need to mock `Foo` and it's owned by others, define the mock class in `Foo`'s package (better, in a `testing` sub-package such that you can clearly separate production code and testing utilities), and put it in a `mock_foo.h`. Then everyone can reference `mock_foo.h` from their tests. If `Foo` ever changes, there is only one copy of `MockFoo` to change, and only tests that depend on the changed methods need to be fixed. + +Another way to do it: you can introduce a thin layer `FooAdaptor` on top of `Foo` and code to this new interface. Since you own `FooAdaptor`, you can absorb changes in `Foo` much more easily. While this is more work initially, carefully choosing the adaptor interface can make your code easier to write and more readable (a net win in the long run), as you can choose `FooAdaptor` to fit your specific domain much better than `Foo` does. + +# Using Mocks in Tests # +Once you have a mock class, using it is easy. The typical work flow is: + + 1. Import the Google Mock names from the `testing` namespace such that you can use them unqualified (You only have to do it once per file. Remember that namespaces are a good idea and good for your health.). + 1. Create some mock objects. + 1. Specify your expectations on them (How many times will a method be called? With what arguments? What should it do? etc.). + 1. Exercise some code that uses the mocks; optionally, check the result using Google Test assertions. If a mock method is called more than expected or with wrong arguments, you'll get an error immediately. + 1. When a mock is destructed, Google Mock will automatically check whether all expectations on it have been satisfied. + +Here's an example: + +``` +#include "path/to/mock-turtle.h" +#include "gmock/gmock.h" +#include "gtest/gtest.h" +using ::testing::AtLeast; // #1 + +TEST(PainterTest, CanDrawSomething) { + MockTurtle turtle; // #2 + EXPECT_CALL(turtle, PenDown()) // #3 + .Times(AtLeast(1)); + + Painter painter(&turtle); // #4 + + EXPECT_TRUE(painter.DrawCircle(0, 0, 10)); +} // #5 + +int main(int argc, char** argv) { + // The following line must be executed to initialize Google Mock + // (and Google Test) before running the tests. + ::testing::InitGoogleMock(&argc, argv); + return RUN_ALL_TESTS(); +} +``` + +As you might have guessed, this test checks that `PenDown()` is called at least once. If the `painter` object didn't call this method, your test will fail with a message like this: + +``` +path/to/my_test.cc:119: Failure +Actual function call count doesn't match this expectation: +Actually: never called; +Expected: called at least once. +``` + +**Tip 1:** If you run the test from an Emacs buffer, you can hit `` on the line number displayed in the error message to jump right to the failed expectation. + +**Tip 2:** If your mock objects are never deleted, the final verification won't happen. Therefore it's a good idea to use a heap leak checker in your tests when you allocate mocks on the heap. + +**Important note:** Google Mock requires expectations to be set **before** the mock functions are called, otherwise the behavior is **undefined**. In particular, you mustn't interleave `EXPECT_CALL()`s and calls to the mock functions. + +This means `EXPECT_CALL()` should be read as expecting that a call will occur _in the future_, not that a call has occurred. Why does Google Mock work like that? Well, specifying the expectation beforehand allows Google Mock to report a violation as soon as it arises, when the context (stack trace, etc) is still available. This makes debugging much easier. + +Admittedly, this test is contrived and doesn't do much. You can easily achieve the same effect without using Google Mock. However, as we shall reveal soon, Google Mock allows you to do _much more_ with the mocks. + +## Using Google Mock with Any Testing Framework ## +If you want to use something other than Google Test (e.g. [CppUnit](http://sourceforge.net/projects/cppunit/) or +[CxxTest](http://cxxtest.tigris.org/)) as your testing framework, just change the `main()` function in the previous section to: +``` +int main(int argc, char** argv) { + // The following line causes Google Mock to throw an exception on failure, + // which will be interpreted by your testing framework as a test failure. + ::testing::GTEST_FLAG(throw_on_failure) = true; + ::testing::InitGoogleMock(&argc, argv); + ... whatever your testing framework requires ... +} +``` + +This approach has a catch: it makes Google Mock throw an exception +from a mock object's destructor sometimes. With some compilers, this +sometimes causes the test program to crash. You'll still be able to +notice that the test has failed, but it's not a graceful failure. + +A better solution is to use Google Test's +[event listener API](../../googletest/docs/AdvancedGuide.md#extending-google-test-by-handling-test-events) +to report a test failure to your testing framework properly. You'll need to +implement the `OnTestPartResult()` method of the event listener interface, but it +should be straightforward. + +If this turns out to be too much work, we suggest that you stick with +Google Test, which works with Google Mock seamlessly (in fact, it is +technically part of Google Mock.). If there is a reason that you +cannot use Google Test, please let us know. + +# Setting Expectations # +The key to using a mock object successfully is to set the _right expectations_ on it. If you set the expectations too strict, your test will fail as the result of unrelated changes. If you set them too loose, bugs can slip through. You want to do it just right such that your test can catch exactly the kind of bugs you intend it to catch. Google Mock provides the necessary means for you to do it "just right." + +## General Syntax ## +In Google Mock we use the `EXPECT_CALL()` macro to set an expectation on a mock method. The general syntax is: + +``` +EXPECT_CALL(mock_object, method(matchers)) + .Times(cardinality) + .WillOnce(action) + .WillRepeatedly(action); +``` + +The macro has two arguments: first the mock object, and then the method and its arguments. Note that the two are separated by a comma (`,`), not a period (`.`). (Why using a comma? The answer is that it was necessary for technical reasons.) + +The macro can be followed by some optional _clauses_ that provide more information about the expectation. We'll discuss how each clause works in the coming sections. + +This syntax is designed to make an expectation read like English. For example, you can probably guess that + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .Times(5) + .WillOnce(Return(100)) + .WillOnce(Return(150)) + .WillRepeatedly(Return(200)); +``` + +says that the `turtle` object's `GetX()` method will be called five times, it will return 100 the first time, 150 the second time, and then 200 every time. Some people like to call this style of syntax a Domain-Specific Language (DSL). + +**Note:** Why do we use a macro to do this? It serves two purposes: first it makes expectations easily identifiable (either by `grep` or by a human reader), and second it allows Google Mock to include the source file location of a failed expectation in messages, making debugging easier. + +## Matchers: What Arguments Do We Expect? ## +When a mock function takes arguments, we must specify what arguments we are expecting; for example: + +``` +// Expects the turtle to move forward by 100 units. +EXPECT_CALL(turtle, Forward(100)); +``` + +Sometimes you may not want to be too specific (Remember that talk about tests being too rigid? Over specification leads to brittle tests and obscures the intent of tests. Therefore we encourage you to specify only what's necessary - no more, no less.). If you care to check that `Forward()` will be called but aren't interested in its actual argument, write `_` as the argument, which means "anything goes": + +``` +using ::testing::_; +... +// Expects the turtle to move forward. +EXPECT_CALL(turtle, Forward(_)); +``` + +`_` is an instance of what we call **matchers**. A matcher is like a predicate and can test whether an argument is what we'd expect. You can use a matcher inside `EXPECT_CALL()` wherever a function argument is expected. + +A list of built-in matchers can be found in the [CheatSheet](CheatSheet.md). For example, here's the `Ge` (greater than or equal) matcher: + +``` +using ::testing::Ge;... +EXPECT_CALL(turtle, Forward(Ge(100))); +``` + +This checks that the turtle will be told to go forward by at least 100 units. + +## Cardinalities: How Many Times Will It Be Called? ## +The first clause we can specify following an `EXPECT_CALL()` is `Times()`. We call its argument a **cardinality** as it tells _how many times_ the call should occur. It allows us to repeat an expectation many times without actually writing it as many times. More importantly, a cardinality can be "fuzzy", just like a matcher can be. This allows a user to express the intent of a test exactly. + +An interesting special case is when we say `Times(0)`. You may have guessed - it means that the function shouldn't be called with the given arguments at all, and Google Mock will report a Google Test failure whenever the function is (wrongfully) called. + +We've seen `AtLeast(n)` as an example of fuzzy cardinalities earlier. For the list of built-in cardinalities you can use, see the [CheatSheet](CheatSheet.md). + +The `Times()` clause can be omitted. **If you omit `Times()`, Google Mock will infer the cardinality for you.** The rules are easy to remember: + + * If **neither** `WillOnce()` **nor** `WillRepeatedly()` is in the `EXPECT_CALL()`, the inferred cardinality is `Times(1)`. + * If there are `n WillOnce()`'s but **no** `WillRepeatedly()`, where `n` >= 1, the cardinality is `Times(n)`. + * If there are `n WillOnce()`'s and **one** `WillRepeatedly()`, where `n` >= 0, the cardinality is `Times(AtLeast(n))`. + +**Quick quiz:** what do you think will happen if a function is expected to be called twice but actually called four times? + +## Actions: What Should It Do? ## +Remember that a mock object doesn't really have a working implementation? We as users have to tell it what to do when a method is invoked. This is easy in Google Mock. + +First, if the return type of a mock function is a built-in type or a pointer, the function has a **default action** (a `void` function will just return, a `bool` function will return `false`, and other functions will return 0). In addition, in C++ 11 and above, a mock function whose return type is default-constructible (i.e. has a default constructor) has a default action of returning a default-constructed value. If you don't say anything, this behavior will be used. + +Second, if a mock function doesn't have a default action, or the default action doesn't suit you, you can specify the action to be taken each time the expectation matches using a series of `WillOnce()` clauses followed by an optional `WillRepeatedly()`. For example, + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillOnce(Return(300)); +``` + +This says that `turtle.GetX()` will be called _exactly three times_ (Google Mock inferred this from how many `WillOnce()` clauses we've written, since we didn't explicitly write `Times()`), and will return 100, 200, and 300 respectively. + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillRepeatedly(Return(300)); +``` + +says that `turtle.GetY()` will be called _at least twice_ (Google Mock knows this as we've written two `WillOnce()` clauses and a `WillRepeatedly()` while having no explicit `Times()`), will return 100 the first time, 200 the second time, and 300 from the third time on. + +Of course, if you explicitly write a `Times()`, Google Mock will not try to infer the cardinality itself. What if the number you specified is larger than there are `WillOnce()` clauses? Well, after all `WillOnce()`s are used up, Google Mock will do the _default_ action for the function every time (unless, of course, you have a `WillRepeatedly()`.). + +What can we do inside `WillOnce()` besides `Return()`? You can return a reference using `ReturnRef(variable)`, or invoke a pre-defined function, among [others](CheatSheet.md#actions). + +**Important note:** The `EXPECT_CALL()` statement evaluates the action clause only once, even though the action may be performed many times. Therefore you must be careful about side effects. The following may not do what you want: + +``` +int n = 100; +EXPECT_CALL(turtle, GetX()) +.Times(4) +.WillRepeatedly(Return(n++)); +``` + +Instead of returning 100, 101, 102, ..., consecutively, this mock function will always return 100 as `n++` is only evaluated once. Similarly, `Return(new Foo)` will create a new `Foo` object when the `EXPECT_CALL()` is executed, and will return the same pointer every time. If you want the side effect to happen every time, you need to define a custom action, which we'll teach in the [CookBook](CookBook.md). + +Time for another quiz! What do you think the following means? + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) +.Times(4) +.WillOnce(Return(100)); +``` + +Obviously `turtle.GetY()` is expected to be called four times. But if you think it will return 100 every time, think twice! Remember that one `WillOnce()` clause will be consumed each time the function is invoked and the default action will be taken afterwards. So the right answer is that `turtle.GetY()` will return 100 the first time, but **return 0 from the second time on**, as returning 0 is the default action for `int` functions. + +## Using Multiple Expectations ## +So far we've only shown examples where you have a single expectation. More realistically, you're going to specify expectations on multiple mock methods, which may be from multiple mock objects. + +By default, when a mock method is invoked, Google Mock will search the expectations in the **reverse order** they are defined, and stop when an active expectation that matches the arguments is found (you can think of it as "newer rules override older ones."). If the matching expectation cannot take any more calls, you will get an upper-bound-violated failure. Here's an example: + +``` +using ::testing::_;... +EXPECT_CALL(turtle, Forward(_)); // #1 +EXPECT_CALL(turtle, Forward(10)) // #2 + .Times(2); +``` + +If `Forward(10)` is called three times in a row, the third time it will be an error, as the last matching expectation (#2) has been saturated. If, however, the third `Forward(10)` call is replaced by `Forward(20)`, then it would be OK, as now #1 will be the matching expectation. + +**Side note:** Why does Google Mock search for a match in the _reverse_ order of the expectations? The reason is that this allows a user to set up the default expectations in a mock object's constructor or the test fixture's set-up phase and then customize the mock by writing more specific expectations in the test body. So, if you have two expectations on the same method, you want to put the one with more specific matchers **after** the other, or the more specific rule would be shadowed by the more general one that comes after it. + +## Ordered vs Unordered Calls ## +By default, an expectation can match a call even though an earlier expectation hasn't been satisfied. In other words, the calls don't have to occur in the order the expectations are specified. + +Sometimes, you may want all the expected calls to occur in a strict order. To say this in Google Mock is easy: + +``` +using ::testing::InSequence;... +TEST(FooTest, DrawsLineSegment) { + ... + { + InSequence dummy; + + EXPECT_CALL(turtle, PenDown()); + EXPECT_CALL(turtle, Forward(100)); + EXPECT_CALL(turtle, PenUp()); + } + Foo(); +} +``` + +By creating an object of type `InSequence`, all expectations in its scope are put into a _sequence_ and have to occur _sequentially_. Since we are just relying on the constructor and destructor of this object to do the actual work, its name is really irrelevant. + +In this example, we test that `Foo()` calls the three expected functions in the order as written. If a call is made out-of-order, it will be an error. + +(What if you care about the relative order of some of the calls, but not all of them? Can you specify an arbitrary partial order? The answer is ... yes! If you are impatient, the details can be found in the [CookBook](CookBook#Expecting_Partially_Ordered_Calls.md).) + +## All Expectations Are Sticky (Unless Said Otherwise) ## +Now let's do a quick quiz to see how well you can use this mock stuff already. How would you test that the turtle is asked to go to the origin _exactly twice_ (you want to ignore any other instructions it receives)? + +After you've come up with your answer, take a look at ours and compare notes (solve it yourself first - don't cheat!): + +``` +using ::testing::_;... +EXPECT_CALL(turtle, GoTo(_, _)) // #1 + .Times(AnyNumber()); +EXPECT_CALL(turtle, GoTo(0, 0)) // #2 + .Times(2); +``` + +Suppose `turtle.GoTo(0, 0)` is called three times. In the third time, Google Mock will see that the arguments match expectation #2 (remember that we always pick the last matching expectation). Now, since we said that there should be only two such calls, Google Mock will report an error immediately. This is basically what we've told you in the "Using Multiple Expectations" section above. + +This example shows that **expectations in Google Mock are "sticky" by default**, in the sense that they remain active even after we have reached their invocation upper bounds. This is an important rule to remember, as it affects the meaning of the spec, and is **different** to how it's done in many other mocking frameworks (Why'd we do that? Because we think our rule makes the common cases easier to express and understand.). + +Simple? Let's see if you've really understood it: what does the following code say? + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)); +} +``` + +If you think it says that `turtle.GetX()` will be called `n` times and will return 10, 20, 30, ..., consecutively, think twice! The problem is that, as we said, expectations are sticky. So, the second time `turtle.GetX()` is called, the last (latest) `EXPECT_CALL()` statement will match, and will immediately lead to an "upper bound exceeded" error - this piece of code is not very useful! + +One correct way of saying that `turtle.GetX()` will return 10, 20, 30, ..., is to explicitly say that the expectations are _not_ sticky. In other words, they should _retire_ as soon as they are saturated: + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); +} +``` + +And, there's a better way to do it: in this case, we expect the calls to occur in a specific order, and we line up the actions to match the order. Since the order is important here, we should make it explicit using a sequence: + +``` +using ::testing::InSequence; +using ::testing::Return; +... +{ + InSequence s; + + for (int i = 1; i <= n; i++) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); + } +} +``` + +By the way, the other situation where an expectation may _not_ be sticky is when it's in a sequence - as soon as another expectation that comes after it in the sequence has been used, it automatically retires (and will never be used to match any call). + +## Uninteresting Calls ## +A mock object may have many methods, and not all of them are that interesting. For example, in some tests we may not care about how many times `GetX()` and `GetY()` get called. + +In Google Mock, if you are not interested in a method, just don't say anything about it. If a call to this method occurs, you'll see a warning in the test output, but it won't be a failure. + +# What Now? # +Congratulations! You've learned enough about Google Mock to start using it. Now, you might want to join the [googlemock](http://groups.google.com/group/googlemock) discussion group and actually write some tests using Google Mock - it will be fun. Hey, it may even be addictive - you've been warned. + +Then, if you feel like increasing your mock quotient, you should move on to the [CookBook](CookBook.md). You can learn many advanced features of Google Mock there -- and advance your level of enjoyment and testing bliss. diff --git a/googlemock/docs/FrequentlyAskedQuestions.md b/googlemock/docs/FrequentlyAskedQuestions.md new file mode 100644 index 0000000..5eac83f --- /dev/null +++ b/googlemock/docs/FrequentlyAskedQuestions.md @@ -0,0 +1,628 @@ + + +Please send your questions to the +[googlemock](http://groups.google.com/group/googlemock) discussion +group. If you need help with compiler errors, make sure you have +tried [Google Mock Doctor](#How_am_I_supposed_to_make_sense_of_these_horrible_template_error.md) first. + +## When I call a method on my mock object, the method for the real object is invoked instead. What's the problem? ## + +In order for a method to be mocked, it must be _virtual_, unless you use the [high-perf dependency injection technique](CookBook.md#mocking-nonvirtual-methods). + +## I wrote some matchers. After I upgraded to a new version of Google Mock, they no longer compile. What's going on? ## + +After version 1.4.0 of Google Mock was released, we had an idea on how +to make it easier to write matchers that can generate informative +messages efficiently. We experimented with this idea and liked what +we saw. Therefore we decided to implement it. + +Unfortunately, this means that if you have defined your own matchers +by implementing `MatcherInterface` or using `MakePolymorphicMatcher()`, +your definitions will no longer compile. Matchers defined using the +`MATCHER*` family of macros are not affected. + +Sorry for the hassle if your matchers are affected. We believe it's +in everyone's long-term interest to make this change sooner than +later. Fortunately, it's usually not hard to migrate an existing +matcher to the new API. Here's what you need to do: + +If you wrote your matcher like this: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` + +you'll need to change it to: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` +(i.e. rename `Matches()` to `MatchAndExplain()` and give it a second +argument of type `MatchResultListener*`.) + +If you were also using `ExplainMatchResultTo()` to improve the matcher +message: +``` +// Old matcher definition that doesn't work with the lastest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + + virtual void ExplainMatchResultTo(MyType value, + ::std::ostream* os) const { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Foo property is " << value.GetFoo(); + } + ... +}; +``` + +you should move the logic of `ExplainMatchResultTo()` into +`MatchAndExplain()`, using the `MatchResultListener` argument where +the `::std::ostream` was used: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Foo property is " << value.GetFoo(); + return value.GetFoo() > 5; + } + ... +}; +``` + +If your matcher is defined using `MakePolymorphicMatcher()`: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you should rename the `Matches()` method to `MatchAndExplain()` and +add a `MatchResultListener*` argument (the same as what you need to do +for matchers defined by implementing `MatcherInterface`): +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +If your polymorphic matcher uses `ExplainMatchResultTo()` for better +failure messages: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +void ExplainMatchResultTo(const MyGreatMatcher& matcher, + MyType value, + ::std::ostream* os) { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Bar property is " << value.GetBar(); +} +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you'll need to move the logic inside `ExplainMatchResultTo()` to +`MatchAndExplain()`: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Bar property is " << value.GetBar(); + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +For more information, you can read these +[two](CookBook.md#writing-new-monomorphic-matchers) +[recipes](CookBook.md#writing-new-polymorphic-matchers) +from the cookbook. As always, you +are welcome to post questions on `googlemock@googlegroups.com` if you +need any help. + +## When using Google Mock, do I have to use Google Test as the testing framework? I have my favorite testing framework and don't want to switch. ## + +Google Mock works out of the box with Google Test. However, it's easy +to configure it to work with any testing framework of your choice. +[Here](ForDummies.md#using-google-mock-with-any-testing-framework) is how. + +## How am I supposed to make sense of these horrible template errors? ## + +If you are confused by the compiler errors gcc threw at you, +try consulting the _Google Mock Doctor_ tool first. What it does is to +scan stdin for gcc error messages, and spit out diagnoses on the +problems (we call them diseases) your code has. + +To "install", run command: +``` +alias gmd='/scripts/gmock_doctor.py' +``` + +To use it, do: +``` + 2>&1 | gmd +``` + +For example: +``` +make my_test 2>&1 | gmd +``` + +Or you can run `gmd` and copy-n-paste gcc's error messages to it. + +## Can I mock a variadic function? ## + +You cannot mock a variadic function (i.e. a function taking ellipsis +(`...`) arguments) directly in Google Mock. + +The problem is that in general, there is _no way_ for a mock object to +know how many arguments are passed to the variadic method, and what +the arguments' types are. Only the _author of the base class_ knows +the protocol, and we cannot look into his head. + +Therefore, to mock such a function, the _user_ must teach the mock +object how to figure out the number of arguments and their types. One +way to do it is to provide overloaded versions of the function. + +Ellipsis arguments are inherited from C and not really a C++ feature. +They are unsafe to use and don't work with arguments that have +constructors or destructors. Therefore we recommend to avoid them in +C++ as much as possible. + +## MSVC gives me warning C4301 or C4373 when I define a mock method with a const parameter. Why? ## + +If you compile this using Microsoft Visual C++ 2005 SP1: +``` +class Foo { + ... + virtual void Bar(const int i) = 0; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Bar, void(const int i)); +}; +``` +You may get the following warning: +``` +warning C4301: 'MockFoo::Bar': overriding virtual function only differs from 'Foo::Bar' by const/volatile qualifier +``` + +This is a MSVC bug. The same code compiles fine with gcc ,for +example. If you use Visual C++ 2008 SP1, you would get the warning: +``` +warning C4373: 'MockFoo::Bar': virtual function overrides 'Foo::Bar', previous versions of the compiler did not override when parameters only differed by const/volatile qualifiers +``` + +In C++, if you _declare_ a function with a `const` parameter, the +`const` modifier is _ignored_. Therefore, the `Foo` base class above +is equivalent to: +``` +class Foo { + ... + virtual void Bar(int i) = 0; // int or const int? Makes no difference. +}; +``` + +In fact, you can _declare_ Bar() with an `int` parameter, and _define_ +it with a `const int` parameter. The compiler will still match them +up. + +Since making a parameter `const` is meaningless in the method +_declaration_, we recommend to remove it in both `Foo` and `MockFoo`. +That should workaround the VC bug. + +Note that we are talking about the _top-level_ `const` modifier here. +If the function parameter is passed by pointer or reference, declaring +the _pointee_ or _referee_ as `const` is still meaningful. For +example, the following two declarations are _not_ equivalent: +``` +void Bar(int* p); // Neither p nor *p is const. +void Bar(const int* p); // p is not const, but *p is. +``` + +## I have a huge mock class, and Microsoft Visual C++ runs out of memory when compiling it. What can I do? ## + +We've noticed that when the `/clr` compiler flag is used, Visual C++ +uses 5~6 times as much memory when compiling a mock class. We suggest +to avoid `/clr` when compiling native C++ mocks. + +## I can't figure out why Google Mock thinks my expectations are not satisfied. What should I do? ## + +You might want to run your test with +`--gmock_verbose=info`. This flag lets Google Mock print a trace +of every mock function call it receives. By studying the trace, +you'll gain insights on why the expectations you set are not met. + +## How can I assert that a function is NEVER called? ## + +``` +EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +## I have a failed test where Google Mock tells me TWICE that a particular expectation is not satisfied. Isn't this redundant? ## + +When Google Mock detects a failure, it prints relevant information +(the mock function arguments, the state of relevant expectations, and +etc) to help the user debug. If another failure is detected, Google +Mock will do the same, including printing the state of relevant +expectations. + +Sometimes an expectation's state didn't change between two failures, +and you'll see the same description of the state twice. They are +however _not_ redundant, as they refer to _different points in time_. +The fact they are the same _is_ interesting information. + +## I get a heap check failure when using a mock object, but using a real object is fine. What can be wrong? ## + +Does the class (hopefully a pure interface) you are mocking have a +virtual destructor? + +Whenever you derive from a base class, make sure its destructor is +virtual. Otherwise Bad Things will happen. Consider the following +code: + +``` +class Base { + public: + // Not virtual, but should be. + ~Base() { ... } + ... +}; + +class Derived : public Base { + public: + ... + private: + std::string value_; +}; + +... + Base* p = new Derived; + ... + delete p; // Surprise! ~Base() will be called, but ~Derived() will not + // - value_ is leaked. +``` + +By changing `~Base()` to virtual, `~Derived()` will be correctly +called when `delete p` is executed, and the heap checker +will be happy. + +## The "newer expectations override older ones" rule makes writing expectations awkward. Why does Google Mock do that? ## + +When people complain about this, often they are referring to code like: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. However, I have to write the expectations in the +// reverse order. This sucks big time!!! +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); +``` + +The problem is that they didn't pick the **best** way to express the test's +intent. + +By default, expectations don't have to be matched in _any_ particular +order. If you want them to match in a certain order, you need to be +explicit. This is Google Mock's (and jMock's) fundamental philosophy: it's +easy to accidentally over-specify your tests, and we want to make it +harder to do so. + +There are two better ways to write the test spec. You could either +put the expectations in sequence: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. Using a sequence, we can write the expectations +// in their natural order. +{ + InSequence s; + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +} +``` + +or you can put the sequence of actions in the same expectation: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +``` + +Back to the original questions: why does Google Mock search the +expectations (and `ON_CALL`s) from back to front? Because this +allows a user to set up a mock's behavior for the common case early +(e.g. in the mock's constructor or the test fixture's set-up phase) +and customize it with more specific rules later. If Google Mock +searches from front to back, this very useful pattern won't be +possible. + +## Google Mock prints a warning when a function without EXPECT\_CALL is called, even if I have set its behavior using ON\_CALL. Would it be reasonable not to show the warning in this case? ## + +When choosing between being neat and being safe, we lean toward the +latter. So the answer is that we think it's better to show the +warning. + +Often people write `ON_CALL`s in the mock object's +constructor or `SetUp()`, as the default behavior rarely changes from +test to test. Then in the test body they set the expectations, which +are often different for each test. Having an `ON_CALL` in the set-up +part of a test doesn't mean that the calls are expected. If there's +no `EXPECT_CALL` and the method is called, it's possibly an error. If +we quietly let the call go through without notifying the user, bugs +may creep in unnoticed. + +If, however, you are sure that the calls are OK, you can write + +``` +EXPECT_CALL(foo, Bar(_)) + .WillRepeatedly(...); +``` + +instead of + +``` +ON_CALL(foo, Bar(_)) + .WillByDefault(...); +``` + +This tells Google Mock that you do expect the calls and no warning should be +printed. + +Also, you can control the verbosity using the `--gmock_verbose` flag. +If you find the output too noisy when debugging, just choose a less +verbose level. + +## How can I delete the mock function's argument in an action? ## + +If you find yourself needing to perform some action that's not +supported by Google Mock directly, remember that you can define your own +actions using +[MakeAction()](CookBook.md#writing-new-actions) or +[MakePolymorphicAction()](CookBook.md#writing_new_polymorphic_actions), +or you can write a stub function and invoke it using +[Invoke()](CookBook.md#using-functions_methods_functors). + +## MOCK\_METHODn()'s second argument looks funny. Why don't you use the MOCK\_METHODn(Method, return\_type, arg\_1, ..., arg\_n) syntax? ## + +What?! I think it's beautiful. :-) + +While which syntax looks more natural is a subjective matter to some +extent, Google Mock's syntax was chosen for several practical advantages it +has. + +Try to mock a function that takes a map as an argument: +``` +virtual int GetSize(const map& m); +``` + +Using the proposed syntax, it would be: +``` +MOCK_METHOD1(GetSize, int, const map& m); +``` + +Guess what? You'll get a compiler error as the compiler thinks that +`const map& m` are **two**, not one, arguments. To work +around this you can use `typedef` to give the map type a name, but +that gets in the way of your work. Google Mock's syntax avoids this +problem as the function's argument types are protected inside a pair +of parentheses: +``` +// This compiles fine. +MOCK_METHOD1(GetSize, int(const map& m)); +``` + +You still need a `typedef` if the return type contains an unprotected +comma, but that's much rarer. + +Other advantages include: + 1. `MOCK_METHOD1(Foo, int, bool)` can leave a reader wonder whether the method returns `int` or `bool`, while there won't be such confusion using Google Mock's syntax. + 1. The way Google Mock describes a function type is nothing new, although many people may not be familiar with it. The same syntax was used in C, and the `function` library in `tr1` uses this syntax extensively. Since `tr1` will become a part of the new version of STL, we feel very comfortable to be consistent with it. + 1. The function type syntax is also used in other parts of Google Mock's API (e.g. the action interface) in order to make the implementation tractable. A user needs to learn it anyway in order to utilize Google Mock's more advanced features. We'd as well stick to the same syntax in `MOCK_METHOD*`! + +## My code calls a static/global function. Can I mock it? ## + +You can, but you need to make some changes. + +In general, if you find yourself needing to mock a static function, +it's a sign that your modules are too tightly coupled (and less +flexible, less reusable, less testable, etc). You are probably better +off defining a small interface and call the function through that +interface, which then can be easily mocked. It's a bit of work +initially, but usually pays for itself quickly. + +This Google Testing Blog +[post](http://googletesting.blogspot.com/2008/06/defeat-static-cling.html) +says it excellently. Check it out. + +## My mock object needs to do complex stuff. It's a lot of pain to specify the actions. Google Mock sucks! ## + +I know it's not a question, but you get an answer for free any way. :-) + +With Google Mock, you can create mocks in C++ easily. And people might be +tempted to use them everywhere. Sometimes they work great, and +sometimes you may find them, well, a pain to use. So, what's wrong in +the latter case? + +When you write a test without using mocks, you exercise the code and +assert that it returns the correct value or that the system is in an +expected state. This is sometimes called "state-based testing". + +Mocks are great for what some call "interaction-based" testing: +instead of checking the system state at the very end, mock objects +verify that they are invoked the right way and report an error as soon +as it arises, giving you a handle on the precise context in which the +error was triggered. This is often more effective and economical to +do than state-based testing. + +If you are doing state-based testing and using a test double just to +simulate the real object, you are probably better off using a fake. +Using a mock in this case causes pain, as it's not a strong point for +mocks to perform complex actions. If you experience this and think +that mocks suck, you are just not using the right tool for your +problem. Or, you might be trying to solve the wrong problem. :-) + +## I got a warning "Uninteresting function call encountered - default action taken.." Should I panic? ## + +By all means, NO! It's just an FYI. + +What it means is that you have a mock function, you haven't set any +expectations on it (by Google Mock's rule this means that you are not +interested in calls to this function and therefore it can be called +any number of times), and it is called. That's OK - you didn't say +it's not OK to call the function! + +What if you actually meant to disallow this function to be called, but +forgot to write `EXPECT_CALL(foo, Bar()).Times(0)`? While +one can argue that it's the user's fault, Google Mock tries to be nice and +prints you a note. + +So, when you see the message and believe that there shouldn't be any +uninteresting calls, you should investigate what's going on. To make +your life easier, Google Mock prints the function name and arguments +when an uninteresting call is encountered. + +## I want to define a custom action. Should I use Invoke() or implement the action interface? ## + +Either way is fine - you want to choose the one that's more convenient +for your circumstance. + +Usually, if your action is for a particular function type, defining it +using `Invoke()` should be easier; if your action can be used in +functions of different types (e.g. if you are defining +`Return(value)`), `MakePolymorphicAction()` is +easiest. Sometimes you want precise control on what types of +functions the action can be used in, and implementing +`ActionInterface` is the way to go here. See the implementation of +`Return()` in `include/gmock/gmock-actions.h` for an example. + +## I'm using the set-argument-pointee action, and the compiler complains about "conflicting return type specified". What does it mean? ## + +You got this error as Google Mock has no idea what value it should return +when the mock method is called. `SetArgPointee()` says what the +side effect is, but doesn't say what the return value should be. You +need `DoAll()` to chain a `SetArgPointee()` with a `Return()`. + +See this [recipe](CookBook.md#mocking_side_effects) for more details and an example. + + +## My question is not in your FAQ! ## + +If you cannot find the answer to your question in this FAQ, there are +some other resources you can use: + + 1. read other [documentation](Documentation.md), + 1. search the mailing list [archive](http://groups.google.com/group/googlemock/topics), + 1. ask it on [googlemock@googlegroups.com](mailto:googlemock@googlegroups.com) and someone will answer it (to prevent spam, we require you to join the [discussion group](http://groups.google.com/group/googlemock) before you can post.). + +Please note that creating an issue in the +[issue tracker](https://github.com/google/googletest/issues) is _not_ +a good way to get your answer, as it is monitored infrequently by a +very small number of people. + +When asking a question, it's helpful to provide as much of the +following information as possible (people cannot help you if there's +not enough information in your question): + + * the version (or the revision number if you check out from SVN directly) of Google Mock you use (Google Mock is under active development, so it's possible that your problem has been solved in a later version), + * your operating system, + * the name and version of your compiler, + * the complete command line flags you give to your compiler, + * the complete compiler error messages (if the question is about compilation), + * the _actual_ code (ideally, a minimal but complete program) that has the problem you encounter. diff --git a/googlemock/docs/KnownIssues.md b/googlemock/docs/KnownIssues.md new file mode 100644 index 0000000..adadf51 --- /dev/null +++ b/googlemock/docs/KnownIssues.md @@ -0,0 +1,19 @@ +As any non-trivial software system, Google Mock has some known limitations and problems. We are working on improving it, and welcome your help! The follow is a list of issues we know about. + + + +## README contains outdated information on Google Mock's compatibility with other testing frameworks ## + +The `README` file in release 1.1.0 still says that Google Mock only works with Google Test. Actually, you can configure Google Mock to work with any testing framework you choose. + +## Tests failing on machines using Power PC CPUs (e.g. some Macs) ## + +`gmock_output_test` and `gmock-printers_test` are known to fail with Power PC CPUs. This is due to portability issues with these tests, and is not an indication of problems in Google Mock itself. You can safely ignore them. + +## Failed to resolve libgtest.so.0 in tests when built against installed Google Test ## + +This only applies if you manually built and installed Google Test, and then built a Google Mock against it (either explicitly, or because gtest-config was in your path post-install). In this situation, Libtool has a known issue with certain systems' ldconfig setup: + +http://article.gmane.org/gmane.comp.sysutils.automake.general/9025 + +This requires a manual run of "sudo ldconfig" after the "sudo make install" for Google Test before any binaries which link against it can be executed. This isn't a bug in our install, but we should at least have documented it or hacked a work-around into our install. We should have one of these solutions in our next release. \ No newline at end of file diff --git a/googlemock/docs/v1_5/CheatSheet.md b/googlemock/docs/v1_5/CheatSheet.md new file mode 100644 index 0000000..3c7bed4 --- /dev/null +++ b/googlemock/docs/v1_5/CheatSheet.md @@ -0,0 +1,525 @@ + + +# Defining a Mock Class # + +## Mocking a Normal Class ## + +Given +``` +class Foo { + ... + virtual ~Foo(); + virtual int GetSize() const = 0; + virtual string Describe(const char* name) = 0; + virtual string Describe(int type) = 0; + virtual bool Process(Bar elem, int count) = 0; +}; +``` +(note that `~Foo()` **must** be virtual) we can define its mock as +``` +#include + +class MockFoo : public Foo { + MOCK_CONST_METHOD0(GetSize, int()); + MOCK_METHOD1(Describe, string(const char* name)); + MOCK_METHOD1(Describe, string(int type)); + MOCK_METHOD2(Process, bool(Bar elem, int count)); +}; +``` + +To create a "nice" mock object which ignores all uninteresting calls, +or a "strict" mock object, which treats them as failures: +``` +NiceMock nice_foo; // The type is a subclass of MockFoo. +StrictMock strict_foo; // The type is a subclass of MockFoo. +``` + +## Mocking a Class Template ## + +To mock +``` +template +class StackInterface { + public: + ... + virtual ~StackInterface(); + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; +``` +(note that `~StackInterface()` **must** be virtual) just append `_T` to the `MOCK_*` macros: +``` +template +class MockStack : public StackInterface { + public: + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Specifying Calling Conventions for Mock Functions ## + +If your mock function doesn't use the default calling convention, you +can specify it by appending `_WITH_CALLTYPE` to any of the macros +described in the previous two sections and supplying the calling +convention as the first argument to the macro. For example, +``` + MOCK_METHOD_1_WITH_CALLTYPE(STDMETHODCALLTYPE, Foo, bool(int n)); + MOCK_CONST_METHOD2_WITH_CALLTYPE(STDMETHODCALLTYPE, Bar, int(double x, double y)); +``` +where `STDMETHODCALLTYPE` is defined by `` on Windows. + +# Using Mocks in Tests # + +The typical flow is: + 1. Import the Google Mock names you need to use. All Google Mock names are in the `testing` namespace unless they are macros or otherwise noted. + 1. Create the mock objects. + 1. Optionally, set the default actions of the mock objects. + 1. Set your expectations on the mock objects (How will they be called? What wil they do?). + 1. Exercise code that uses the mock objects; if necessary, check the result using [Google Test](http://code.google.com/p/googletest/) assertions. + 1. When a mock objects is destructed, Google Mock automatically verifies that all expectations on it have been satisfied. + +Here is an example: +``` +using ::testing::Return; // #1 + +TEST(BarTest, DoesThis) { + MockFoo foo; // #2 + + ON_CALL(foo, GetSize()) // #3 + .WillByDefault(Return(1)); + // ... other default actions ... + + EXPECT_CALL(foo, Describe(5)) // #4 + .Times(3) + .WillRepeatedly(Return("Category 5")); + // ... other expectations ... + + EXPECT_EQ("good", MyProductionFunction(&foo)); // #5 +} // #6 +``` + +# Setting Default Actions # + +Google Mock has a **built-in default action** for any function that +returns `void`, `bool`, a numeric value, or a pointer. + +To customize the default action for functions with return type `T` globally: +``` +using ::testing::DefaultValue; + +DefaultValue::Set(value); // Sets the default value to be returned. +// ... use the mocks ... +DefaultValue::Clear(); // Resets the default value. +``` + +To customize the default action for a particular method, use `ON_CALL()`: +``` +ON_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .WillByDefault(action); +``` + +# Setting Expectations # + +`EXPECT_CALL()` sets **expectations** on a mock method (How will it be +called? What will it do?): +``` +EXPECT_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .Times(cardinality) ? + .InSequence(sequences) * + .After(expectations) * + .WillOnce(action) * + .WillRepeatedly(action) ? + .RetiresOnSaturation(); ? +``` + +If `Times()` is omitted, the cardinality is assumed to be: + + * `Times(1)` when there is neither `WillOnce()` nor `WillRepeatedly()`; + * `Times(n)` when there are `n WillOnce()`s but no `WillRepeatedly()`, where `n` >= 1; or + * `Times(AtLeast(n))` when there are `n WillOnce()`s and a `WillRepeatedly()`, where `n` >= 0. + +A method with no `EXPECT_CALL()` is free to be invoked _any number of times_, and the default action will be taken each time. + +# Matchers # + +A **matcher** matches a _single_ argument. You can use it inside +`ON_CALL()` or `EXPECT_CALL()`, or use it to validate a value +directly: + +| `EXPECT_THAT(value, matcher)` | Asserts that `value` matches `matcher`. | +|:------------------------------|:----------------------------------------| +| `ASSERT_THAT(value, matcher)` | The same as `EXPECT_THAT(value, matcher)`, except that it generates a **fatal** failure. | + +Built-in matchers (where `argument` is the function argument) are +divided into several categories: + +## Wildcard ## +|`_`|`argument` can be any value of the correct type.| +|:--|:-----------------------------------------------| +|`A()` or `An()`|`argument` can be any value of type `type`. | + +## Generic Comparison ## + +|`Eq(value)` or `value`|`argument == value`| +|:---------------------|:------------------| +|`Ge(value)` |`argument >= value`| +|`Gt(value)` |`argument > value` | +|`Le(value)` |`argument <= value`| +|`Lt(value)` |`argument < value` | +|`Ne(value)` |`argument != value`| +|`IsNull()` |`argument` is a `NULL` pointer (raw or smart).| +|`NotNull()` |`argument` is a non-null pointer (raw or smart).| +|`Ref(variable)` |`argument` is a reference to `variable`.| +|`TypedEq(value)`|`argument` has type `type` and is equal to `value`. You may need to use this instead of `Eq(value)` when the mock function is overloaded.| + +Except `Ref()`, these matchers make a _copy_ of `value` in case it's +modified or destructed later. If the compiler complains that `value` +doesn't have a public copy constructor, try wrap it in `ByRef()`, +e.g. `Eq(ByRef(non_copyable_value))`. If you do that, make sure +`non_copyable_value` is not changed afterwards, or the meaning of your +matcher will be changed. + +## Floating-Point Matchers ## + +|`DoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as unequal.| +|:-------------------|:----------------------------------------------------------------------------------------------| +|`FloatEq(a_float)` |`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as unequal. | +|`NanSensitiveDoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as equal. | +|`NanSensitiveFloatEq(a_float)`|`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as equal. | + +The above matchers use ULP-based comparison (the same as used in +[Google Test](http://code.google.com/p/googletest/)). They +automatically pick a reasonable error bound based on the absolute +value of the expected value. `DoubleEq()` and `FloatEq()` conform to +the IEEE standard, which requires comparing two NaNs for equality to +return false. The `NanSensitive*` version instead treats two NaNs as +equal, which is often what a user wants. + +## String Matchers ## + +The `argument` can be either a C string or a C++ string object: + +|`ContainsRegex(string)`|`argument` matches the given regular expression.| +|:----------------------|:-----------------------------------------------| +|`EndsWith(suffix)` |`argument` ends with string `suffix`. | +|`HasSubstr(string)` |`argument` contains `string` as a sub-string. | +|`MatchesRegex(string)` |`argument` matches the given regular expression with the match starting at the first character and ending at the last character.| +|`StartsWith(prefix)` |`argument` starts with string `prefix`. | +|`StrCaseEq(string)` |`argument` is equal to `string`, ignoring case. | +|`StrCaseNe(string)` |`argument` is not equal to `string`, ignoring case.| +|`StrEq(string)` |`argument` is equal to `string`. | +|`StrNe(string)` |`argument` is not equal to `string`. | + +`StrCaseEq()`, `StrCaseNe()`, `StrEq()`, and `StrNe()` work for wide +strings as well. + +## Container Matchers ## + +Most STL-style containers support `==`, so you can use +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. If you want to write the elements in-line, +match them more flexibly, or get more informative messages, you can use: + +| `Contains(e)` | `argument` contains an element that matches `e`, which can be either a value or a matcher. | +|:--------------|:-------------------------------------------------------------------------------------------| +|`ElementsAre(e0, e1, ..., en)`|`argument` has `n + 1` elements, where the i-th element matches `ei`, which can be a value or a matcher. 0 to 10 arguments are allowed.| +|`ElementsAreArray(array)` or `ElementsAreArray(array, count)`|The same as `ElementsAre()` except that the expected element values/matchers come from a C-style array.| +| `ContainerEq(container)` | The same as `Eq(container)` except that the failure message also includes which elements are in one container but not the other. | + +These matchers can also match: + + 1. a native array passed by reference (e.g. in `Foo(const int (&a)[5])`), and + 1. an array passed as a pointer and a count (e.g. in `Bar(const T* buffer, int len)` -- see [Multi-argument Matchers](#Multiargument_Matchers.md)). + +where the array may be multi-dimensional (i.e. its elements can be arrays). + +## Member Matchers ## + +|`Field(&class::field, m)`|`argument.field` (or `argument->field` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| +|:------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------| +|`Key(e)` |`argument.first` matches `e`, which can be either a value or a matcher. E.g. `Contains(Key(Le(5)))` can verify that a `map` contains a key `<= 5`.| +|`Pair(m1, m2)` |`argument` is an `std::pair` whose `first` field matches `m1` and `second` field matches `m2`. | +|`Property(&class::property, m)`|`argument.property()` (or `argument->property()` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| + +## Matching the Result of a Function or Functor ## + +|`ResultOf(f, m)`|`f(argument)` matches matcher `m`, where `f` is a function or functor.| +|:---------------|:---------------------------------------------------------------------| + +## Pointer Matchers ## + +|`Pointee(m)`|`argument` (either a smart pointer or a raw pointer) points to a value that matches matcher `m`.| +|:-----------|:-----------------------------------------------------------------------------------------------| + +## Multiargument Matchers ## + +These are matchers on tuple types. They can be used in +`.With()`. The following can be used on functions with two
+arguments `x` and `y`: + +|`Eq()`|`x == y`| +|:-----|:-------| +|`Ge()`|`x >= y`| +|`Gt()`|`x > y` | +|`Le()`|`x <= y`| +|`Lt()`|`x < y` | +|`Ne()`|`x != y`| + +You can use the following selectors to pick a subset of the arguments +(or reorder them) to participate in the matching: + +|`AllArgs(m)`|Equivalent to `m`. Useful as syntactic sugar in `.With(AllArgs(m))`.| +|:-----------|:-------------------------------------------------------------------| +|`Args(m)`|The `k` selected (using 0-based indices) arguments match `m`, e.g. `Args<1, 2>(Contains(5))`.| + +## Composite Matchers ## + +You can make a matcher from one or more other matchers: + +|`AllOf(m1, m2, ..., mn)`|`argument` matches all of the matchers `m1` to `mn`.| +|:-----------------------|:---------------------------------------------------| +|`AnyOf(m1, m2, ..., mn)`|`argument` matches at least one of the matchers `m1` to `mn`.| +|`Not(m)` |`argument` doesn't match matcher `m`. | + +## Adapters for Matchers ## + +|`MatcherCast(m)`|casts matcher `m` to type `Matcher`.| +|:------------------|:--------------------------------------| +|`SafeMatcherCast(m)`| [safely casts](V1_5_CookBook#Casting_Matchers.md) matcher `m` to type `Matcher`. | +|`Truly(predicate)` |`predicate(argument)` returns something considered by C++ to be true, where `predicate` is a function or functor.| + +## Matchers as Predicates ## + +|`Matches(m)`|a unary functor that returns `true` if the argument matches `m`.| +|:-----------|:---------------------------------------------------------------| +|`ExplainMatchResult(m, value, result_listener)`|returns `true` if `value` matches `m`, explaining the result to `result_listener`.| +|`Value(x, m)`|returns `true` if the value of `x` matches `m`. | + +## Defining Matchers ## + +| `MATCHER(IsEven, "") { return (arg % 2) == 0; }` | Defines a matcher `IsEven()` to match an even number. | +|:-------------------------------------------------|:------------------------------------------------------| +| `MATCHER_P(IsDivisibleBy, n, "") { *result_listener << "where the remainder is " << (arg % n); return (arg % n) == 0; }` | Defines a macher `IsDivisibleBy(n)` to match a number divisible by `n`. | +| `MATCHER_P2(IsBetween, a, b, "is between %(a)s and %(b)s") { return a <= arg && arg <= b; }` | Defines a matcher `IsBetween(a, b)` to match a value in the range [`a`, `b`]. | + +**Notes:** + + 1. The `MATCHER*` macros cannot be used inside a function or class. + 1. The matcher body must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). + 1. You can use `PrintToString(x)` to convert a value `x` of any type to a string. + +## Matchers as Test Assertions ## + +|`ASSERT_THAT(expression, m)`|Generates a [fatal failure](http://code.google.com/p/googletest/wiki/GoogleTestPrimer#Assertions) if the value of `expression` doesn't match matcher `m`.| +|:---------------------------|:--------------------------------------------------------------------------------------------------------------------------------------------------------| +|`EXPECT_THAT(expression, m)`|Generates a non-fatal failure if the value of `expression` doesn't match matcher `m`. | + +# Actions # + +**Actions** specify what a mock function should do when invoked. + +## Returning a Value ## + +|`Return()`|Return from a `void` mock function.| +|:---------|:----------------------------------| +|`Return(value)`|Return `value`. | +|`ReturnArg()`|Return the `N`-th (0-based) argument.| +|`ReturnNew(a1, ..., ak)`|Return `new T(a1, ..., ak)`; a different object is created each time.| +|`ReturnNull()`|Return a null pointer. | +|`ReturnRef(variable)`|Return a reference to `variable`. | + +## Side Effects ## + +|`Assign(&variable, value)`|Assign `value` to variable.| +|:-------------------------|:--------------------------| +| `DeleteArg()` | Delete the `N`-th (0-based) argument, which must be a pointer. | +| `SaveArg(pointer)` | Save the `N`-th (0-based) argument to `*pointer`. | +| `SetArgReferee(value)` | Assign value to the variable referenced by the `N`-th (0-based) argument. | +|`SetArgumentPointee(value)`|Assign `value` to the variable pointed by the `N`-th (0-based) argument.| +|`SetArrayArgument(first, last)`|Copies the elements in source range [`first`, `last`) to the array pointed to by the `N`-th (0-based) argument, which can be either a pointer or an iterator. The action does not take ownership of the elements in the source range.| +|`SetErrnoAndReturn(error, value)`|Set `errno` to `error` and return `value`.| +|`Throw(exception)` |Throws the given exception, which can be any copyable value. Available since v1.1.0.| + +## Using a Function or a Functor as an Action ## + +|`Invoke(f)`|Invoke `f` with the arguments passed to the mock function, where `f` can be a global/static function or a functor.| +|:----------|:-----------------------------------------------------------------------------------------------------------------| +|`Invoke(object_pointer, &class::method)`|Invoke the {method on the object with the arguments passed to the mock function. | +|`InvokeWithoutArgs(f)`|Invoke `f`, which can be a global/static function or a functor. `f` must take no arguments. | +|`InvokeWithoutArgs(object_pointer, &class::method)`|Invoke the method on the object, which takes no arguments. | +|`InvokeArgument(arg1, arg2, ..., argk)`|Invoke the mock function's `N`-th (0-based) argument, which must be a function or a functor, with the `k` arguments.| + +The return value of the invoked function is used as the return value +of the action. + +When defining a function or functor to be used with `Invoke*()`, you can declare any unused parameters as `Unused`: +``` + double Distance(Unused, double x, double y) { return sqrt(x*x + y*y); } + ... + EXPECT_CALL(mock, Foo("Hi", _, _)).WillOnce(Invoke(Distance)); +``` + +In `InvokeArgument(...)`, if an argument needs to be passed by reference, wrap it inside `ByRef()`. For example, +``` + InvokeArgument<2>(5, string("Hi"), ByRef(foo)) +``` +calls the mock function's #2 argument, passing to it `5` and `string("Hi")` by value, and `foo` by reference. + +## Default Action ## + +|`DoDefault()`|Do the default action (specified by `ON_CALL()` or the built-in one).| +|:------------|:--------------------------------------------------------------------| + +**Note:** due to technical reasons, `DoDefault()` cannot be used inside a composite action - trying to do so will result in a run-time error. + +## Composite Actions ## + +|`DoAll(a1, a2, ..., an)`|Do all actions `a1` to `an` and return the result of `an` in each invocation. The first `n - 1` sub-actions must return void. | +|:-----------------------|:-----------------------------------------------------------------------------------------------------------------------------| +|`IgnoreResult(a)` |Perform action `a` and ignore its result. `a` must not return void. | +|`WithArg(a)` |Pass the `N`-th (0-based) argument of the mock function to action `a` and perform it. | +|`WithArgs(a)`|Pass the selected (0-based) arguments of the mock function to action `a` and perform it. | +|`WithoutArgs(a)` |Perform action `a` without any arguments. | + +## Defining Actions ## + +| `ACTION(Sum) { return arg0 + arg1; }` | Defines an action `Sum()` to return the sum of the mock function's argument #0 and #1. | +|:--------------------------------------|:---------------------------------------------------------------------------------------| +| `ACTION_P(Plus, n) { return arg0 + n; }` | Defines an action `Plus(n)` to return the sum of the mock function's argument #0 and `n`. | +| `ACTION_Pk(Foo, p1, ..., pk) { statements; }` | Defines a parameterized action `Foo(p1, ..., pk)` to execute the given `statements`. | + +The `ACTION*` macros cannot be used inside a function or class. + +# Cardinalities # + +These are used in `Times()` to specify how many times a mock function will be called: + +|`AnyNumber()`|The function can be called any number of times.| +|:------------|:----------------------------------------------| +|`AtLeast(n)` |The call is expected at least `n` times. | +|`AtMost(n)` |The call is expected at most `n` times. | +|`Between(m, n)`|The call is expected between `m` and `n` (inclusive) times.| +|`Exactly(n) or n`|The call is expected exactly `n` times. In particular, the call should never happen when `n` is 0.| + +# Expectation Order # + +By default, the expectations can be matched in _any_ order. If some +or all expectations must be matched in a given order, there are two +ways to specify it. They can be used either independently or +together. + +## The After Clause ## + +``` +using ::testing::Expectation; +... +Expectation init_x = EXPECT_CALL(foo, InitX()); +Expectation init_y = EXPECT_CALL(foo, InitY()); +EXPECT_CALL(foo, Bar()) + .After(init_x, init_y); +``` +says that `Bar()` can be called only after both `InitX()` and +`InitY()` have been called. + +If you don't know how many pre-requisites an expectation has when you +write it, you can use an `ExpectationSet` to collect them: + +``` +using ::testing::ExpectationSet; +... +ExpectationSet all_inits; +for (int i = 0; i < element_count; i++) { + all_inits += EXPECT_CALL(foo, InitElement(i)); +} +EXPECT_CALL(foo, Bar()) + .After(all_inits); +``` +says that `Bar()` can be called only after all elements have been +initialized (but we don't care about which elements get initialized +before the others). + +Modifying an `ExpectationSet` after using it in an `.After()` doesn't +affect the meaning of the `.After()`. + +## Sequences ## + +When you have a long chain of sequential expectations, it's easier to +specify the order using **sequences**, which don't require you to given +each expectation in the chain a different name. All expected
+calls in the same sequence must occur in the order they are +specified. + +``` +using ::testing::Sequence; +Sequence s1, s2; +... +EXPECT_CALL(foo, Reset()) + .InSequence(s1, s2) + .WillOnce(Return(true)); +EXPECT_CALL(foo, GetSize()) + .InSequence(s1) + .WillOnce(Return(1)); +EXPECT_CALL(foo, Describe(A())) + .InSequence(s2) + .WillOnce(Return("dummy")); +``` +says that `Reset()` must be called before _both_ `GetSize()` _and_ +`Describe()`, and the latter two can occur in any order. + +To put many expectations in a sequence conveniently: +``` +using ::testing::InSequence; +{ + InSequence dummy; + + EXPECT_CALL(...)...; + EXPECT_CALL(...)...; + ... + EXPECT_CALL(...)...; +} +``` +says that all expected calls in the scope of `dummy` must occur in +strict order. The name `dummy` is irrelevant.) + +# Verifying and Resetting a Mock # + +Google Mock will verify the expectations on a mock object when it is destructed, or you can do it earlier: +``` +using ::testing::Mock; +... +// Verifies and removes the expectations on mock_obj; +// returns true iff successful. +Mock::VerifyAndClearExpectations(&mock_obj); +... +// Verifies and removes the expectations on mock_obj; +// also removes the default actions set by ON_CALL(); +// returns true iff successful. +Mock::VerifyAndClear(&mock_obj); +``` + +You can also tell Google Mock that a mock object can be leaked and doesn't +need to be verified: +``` +Mock::AllowLeak(&mock_obj); +``` + +# Mock Classes # + +Google Mock defines a convenient mock class template +``` +class MockFunction { + public: + MOCK_METHODn(Call, R(A1, ..., An)); +}; +``` +See this [recipe](V1_5_CookBook#Using_Check_Points.md) for one application of it. + +# Flags # + +| `--gmock_catch_leaked_mocks=0` | Don't report leaked mock objects as failures. | +|:-------------------------------|:----------------------------------------------| +| `--gmock_verbose=LEVEL` | Sets the default verbosity level (`info`, `warning`, or `error`) of Google Mock messages. | \ No newline at end of file diff --git a/googlemock/docs/v1_5/CookBook.md b/googlemock/docs/v1_5/CookBook.md new file mode 100644 index 0000000..26e153c --- /dev/null +++ b/googlemock/docs/v1_5/CookBook.md @@ -0,0 +1,3250 @@ + + +You can find recipes for using Google Mock here. If you haven't yet, +please read the [ForDummies](V1_5_ForDummies.md) document first to make sure you understand +the basics. + +**Note:** Google Mock lives in the `testing` name space. For +readability, it is recommended to write `using ::testing::Foo;` once in +your file before using the name `Foo` defined by Google Mock. We omit +such `using` statements in this page for brevity, but you should do it +in your own code. + +# Creating Mock Classes # + +## Mocking Private or Protected Methods ## + +You must always put a mock method definition (`MOCK_METHOD*`) in a +`public:` section of the mock class, regardless of the method being +mocked being `public`, `protected`, or `private` in the base class. +This allows `ON_CALL` and `EXPECT_CALL` to reference the mock function +from outside of the mock class. (Yes, C++ allows a subclass to change +the access level of a virtual function in the base class.) Example: + +``` +class Foo { + public: + ... + virtual bool Transform(Gadget* g) = 0; + + protected: + virtual void Resume(); + + private: + virtual int GetTimeOut(); +}; + +class MockFoo : public Foo { + public: + ... + MOCK_METHOD1(Transform, bool(Gadget* g)); + + // The following must be in the public section, even though the + // methods are protected or private in the base class. + MOCK_METHOD0(Resume, void()); + MOCK_METHOD0(GetTimeOut, int()); +}; +``` + +## Mocking Overloaded Methods ## + +You can mock overloaded functions as usual. No special attention is required: + +``` +class Foo { + ... + + // Must be virtual as we'll inherit from Foo. + virtual ~Foo(); + + // Overloaded on the types and/or numbers of arguments. + virtual int Add(Element x); + virtual int Add(int times, Element x); + + // Overloaded on the const-ness of this object. + virtual Bar& GetBar(); + virtual const Bar& GetBar() const; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Add, int(Element x)); + MOCK_METHOD2(Add, int(int times, Element x); + + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +``` + +**Note:** if you don't mock all versions of the overloaded method, the +compiler will give you a warning about some methods in the base class +being hidden. To fix that, use `using` to bring them in scope: + +``` +class MockFoo : public Foo { + ... + using Foo::Add; + MOCK_METHOD1(Add, int(Element x)); + // We don't want to mock int Add(int times, Element x); + ... +}; +``` + +## Mocking Class Templates ## + +To mock a class template, append `_T` to the `MOCK_*` macros: + +``` +template +class StackInterface { + ... + // Must be virtual as we'll inherit from StackInterface. + virtual ~StackInterface(); + + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; + +template +class MockStack : public StackInterface { + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Mocking Nonvirtual Methods ## + +Google Mock can mock non-virtual functions to be used in what we call _hi-perf +dependency injection_. + +In this case, instead of sharing a common base class with the real +class, your mock class will be _unrelated_ to the real class, but +contain methods with the same signatures. The syntax for mocking +non-virtual methods is the _same_ as mocking virtual methods: + +``` +// A simple packet stream class. None of its members is virtual. +class ConcretePacketStream { + public: + void AppendPacket(Packet* new_packet); + const Packet* GetPacket(size_t packet_number) const; + size_t NumberOfPackets() const; + ... +}; + +// A mock packet stream class. It inherits from no other, but defines +// GetPacket() and NumberOfPackets(). +class MockPacketStream { + public: + MOCK_CONST_METHOD1(GetPacket, const Packet*(size_t packet_number)); + MOCK_CONST_METHOD0(NumberOfPackets, size_t()); + ... +}; +``` + +Note that the mock class doesn't define `AppendPacket()`, unlike the +real class. That's fine as long as the test doesn't need to call it. + +Next, you need a way to say that you want to use +`ConcretePacketStream` in production code, and use `MockPacketStream` +in tests. Since the functions are not virtual and the two classes are +unrelated, you must specify your choice at _compile time_ (as opposed +to run time). + +One way to do it is to templatize your code that needs to use a packet +stream. More specifically, you will give your code a template type +argument for the type of the packet stream. In production, you will +instantiate your template with `ConcretePacketStream` as the type +argument. In tests, you will instantiate the same template with +`MockPacketStream`. For example, you may write: + +``` +template +void CreateConnection(PacketStream* stream) { ... } + +template +class PacketReader { + public: + void ReadPackets(PacketStream* stream, size_t packet_num); +}; +``` + +Then you can use `CreateConnection()` and +`PacketReader` in production code, and use +`CreateConnection()` and +`PacketReader` in tests. + +``` + MockPacketStream mock_stream; + EXPECT_CALL(mock_stream, ...)...; + .. set more expectations on mock_stream ... + PacketReader reader(&mock_stream); + ... exercise reader ... +``` + +## Mocking Free Functions ## + +It's possible to use Google Mock to mock a free function (i.e. a +C-style function or a static method). You just need to rewrite your +code to use an interface (abstract class). + +Instead of calling a free function (say, `OpenFile`) directly, +introduce an interface for it and have a concrete subclass that calls +the free function: + +``` +class FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) = 0; +}; + +class File : public FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) { + return OpenFile(path, mode); + } +}; +``` + +Your code should talk to `FileInterface` to open a file. Now it's +easy to mock out the function. + +This may seem much hassle, but in practice you often have multiple +related functions that you can put in the same interface, so the +per-function syntactic overhead will be much lower. + +If you are concerned about the performance overhead incurred by +virtual functions, and profiling confirms your concern, you can +combine this with the recipe for [mocking non-virtual methods](#Mocking_Nonvirtual_Methods.md). + +## Nice Mocks and Strict Mocks ## + +If a mock method has no `EXPECT_CALL` spec but is called, Google Mock +will print a warning about the "uninteresting call". The rationale is: + + * New methods may be added to an interface after a test is written. We shouldn't fail a test just because a method it doesn't know about is called. + * However, this may also mean there's a bug in the test, so Google Mock shouldn't be silent either. If the user believes these calls are harmless, he can add an `EXPECT_CALL()` to suppress the warning. + +However, sometimes you may want to suppress all "uninteresting call" +warnings, while sometimes you may want the opposite, i.e. to treat all +of them as errors. Google Mock lets you make the decision on a +per-mock-object basis. + +Suppose your test uses a mock class `MockFoo`: + +``` +TEST(...) { + MockFoo mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +If a method of `mock_foo` other than `DoThis()` is called, it will be +reported by Google Mock as a warning. However, if you rewrite your +test to use `NiceMock` instead, the warning will be gone, +resulting in a cleaner test output: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +`NiceMock` is a subclass of `MockFoo`, so it can be used +wherever `MockFoo` is accepted. + +It also works if `MockFoo`'s constructor takes some arguments, as +`NiceMock` "inherits" `MockFoo`'s constructors: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo(5, "hi"); // Calls MockFoo(5, "hi"). + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +The usage of `StrictMock` is similar, except that it makes all +uninteresting calls failures: + +``` +using ::testing::StrictMock; + +TEST(...) { + StrictMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... + + // The test will fail if a method of mock_foo other than DoThis() + // is called. +} +``` + +There are some caveats though (I don't like them just as much as the +next guy, but sadly they are side effects of C++'s limitations): + + 1. `NiceMock` and `StrictMock` only work for mock methods defined using the `MOCK_METHOD*` family of macros **directly** in the `MockFoo` class. If a mock method is defined in a **base class** of `MockFoo`, the "nice" or "strict" modifier may not affect it, depending on the compiler. In particular, nesting `NiceMock` and `StrictMock` (e.g. `NiceMock >`) is **not** supported. + 1. The constructors of the base mock (`MockFoo`) cannot have arguments passed by non-const reference, which happens to be banned by the [Google C++ style guide](http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml). + 1. During the constructor or destructor of `MockFoo`, the mock object is _not_ nice or strict. This may cause surprises if the constructor or destructor calls a mock method on `this` object. (This behavior, however, is consistent with C++'s general rule: if a constructor or destructor calls a virtual method of `this` object, that method is treated as non-virtual. In other words, to the base class's constructor or destructor, `this` object behaves like an instance of the base class, not the derived class. This rule is required for safety. Otherwise a base constructor may use members of a derived class before they are initialized, or a base destructor may use members of a derived class after they have been destroyed.) + +Finally, you should be **very cautious** when using this feature, as the +decision you make applies to **all** future changes to the mock +class. If an important change is made in the interface you are mocking +(and thus in the mock class), it could break your tests (if you use +`StrictMock`) or let bugs pass through without a warning (if you use +`NiceMock`). Therefore, try to specify the mock's behavior using +explicit `EXPECT_CALL` first, and only turn to `NiceMock` or +`StrictMock` as the last resort. + +## Simplifying the Interface without Breaking Existing Code ## + +Sometimes a method has a long list of arguments that is mostly +uninteresting. For example, + +``` +class LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, + const struct tm* tm_time, + const char* message, size_t message_len) = 0; +}; +``` + +This method's argument list is lengthy and hard to work with (let's +say that the `message` argument is not even 0-terminated). If we mock +it as is, using the mock will be awkward. If, however, we try to +simplify this interface, we'll need to fix all clients depending on +it, which is often infeasible. + +The trick is to re-dispatch the method in the mock class: + +``` +class ScopedMockLog : public LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, const tm* tm_time, + const char* message, size_t message_len) { + // We are only interested in the log severity, full file name, and + // log message. + Log(severity, full_filename, std::string(message, message_len)); + } + + // Implements the mock method: + // + // void Log(LogSeverity severity, + // const string& file_path, + // const string& message); + MOCK_METHOD3(Log, void(LogSeverity severity, const string& file_path, + const string& message)); +}; +``` + +By defining a new mock method with a trimmed argument list, we make +the mock class much more user-friendly. + +## Alternative to Mocking Concrete Classes ## + +Often you may find yourself using classes that don't implement +interfaces. In order to test your code that uses such a class (let's +call it `Concrete`), you may be tempted to make the methods of +`Concrete` virtual and then mock it. + +Try not to do that. + +Making a non-virtual function virtual is a big decision. It creates an +extension point where subclasses can tweak your class' behavior. This +weakens your control on the class because now it's harder to maintain +the class' invariants. You should make a function virtual only when +there is a valid reason for a subclass to override it. + +Mocking concrete classes directly is problematic as it creates a tight +coupling between the class and the tests - any small change in the +class may invalidate your tests and make test maintenance a pain. + +To avoid such problems, many programmers have been practicing "coding +to interfaces": instead of talking to the `Concrete` class, your code +would define an interface and talk to it. Then you implement that +interface as an adaptor on top of `Concrete`. In tests, you can easily +mock that interface to observe how your code is doing. + +This technique incurs some overhead: + + * You pay the cost of virtual function calls (usually not a problem). + * There is more abstraction for the programmers to learn. + +However, it can also bring significant benefits in addition to better +testability: + + * `Concrete`'s API may not fit your problem domain very well, as you may not be the only client it tries to serve. By designing your own interface, you have a chance to tailor it to your need - you may add higher-level functionalities, rename stuff, etc instead of just trimming the class. This allows you to write your code (user of the interface) in a more natural way, which means it will be more readable, more maintainable, and you'll be more productive. + * If `Concrete`'s implementation ever has to change, you don't have to rewrite everywhere it is used. Instead, you can absorb the change in your implementation of the interface, and your other code and tests will be insulated from this change. + +Some people worry that if everyone is practicing this technique, they +will end up writing lots of redundant code. This concern is totally +understandable. However, there are two reasons why it may not be the +case: + + * Different projects may need to use `Concrete` in different ways, so the best interfaces for them will be different. Therefore, each of them will have its own domain-specific interface on top of `Concrete`, and they will not be the same code. + * If enough projects want to use the same interface, they can always share it, just like they have been sharing `Concrete`. You can check in the interface and the adaptor somewhere near `Concrete` (perhaps in a `contrib` sub-directory) and let many projects use it. + +You need to weigh the pros and cons carefully for your particular +problem, but I'd like to assure you that the Java community has been +practicing this for a long time and it's a proven effective technique +applicable in a wide variety of situations. :-) + +## Delegating Calls to a Fake ## + +Some times you have a non-trivial fake implementation of an +interface. For example: + +``` +class Foo { + public: + virtual ~Foo() {} + virtual char DoThis(int n) = 0; + virtual void DoThat(const char* s, int* p) = 0; +}; + +class FakeFoo : public Foo { + public: + virtual char DoThis(int n) { + return (n > 0) ? '+' : + (n < 0) ? '-' : '0'; + } + + virtual void DoThat(const char* s, int* p) { + *p = strlen(s); + } +}; +``` + +Now you want to mock this interface such that you can set expectations +on it. However, you also want to use `FakeFoo` for the default +behavior, as duplicating it in the mock object is, well, a lot of +work. + +When you define the mock class using Google Mock, you can have it +delegate its default action to a fake class you already have, using +this pattern: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + // Normal mock method definitions using Google Mock. + MOCK_METHOD1(DoThis, char(int n)); + MOCK_METHOD2(DoThat, void(const char* s, int* p)); + + // Delegates the default actions of the methods to a FakeFoo object. + // This must be called *before* the custom ON_CALL() statements. + void DelegateToFake() { + ON_CALL(*this, DoThis(_)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThis)); + ON_CALL(*this, DoThat(_, _)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThat)); + } + private: + FakeFoo fake_; // Keeps an instance of the fake in the mock. +}; +``` + +With that, you can use `MockFoo` in your tests as usual. Just remember +that if you don't explicitly set an action in an `ON_CALL()` or +`EXPECT_CALL()`, the fake will be called upon to do it: + +``` +using ::testing::_; + +TEST(AbcTest, Xyz) { + MockFoo foo; + foo.DelegateToFake(); // Enables the fake for delegation. + + // Put your ON_CALL(foo, ...)s here, if any. + + // No action specified, meaning to use the default action. + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(foo, DoThat(_, _)); + + int n = 0; + EXPECT_EQ('+', foo.DoThis(5)); // FakeFoo::DoThis() is invoked. + foo.DoThat("Hi", &n); // FakeFoo::DoThat() is invoked. + EXPECT_EQ(2, n); +} +``` + +**Some tips:** + + * If you want, you can still override the default action by providing your own `ON_CALL()` or using `.WillOnce()` / `.WillRepeatedly()` in `EXPECT_CALL()`. + * In `DelegateToFake()`, you only need to delegate the methods whose fake implementation you intend to use. + * The general technique discussed here works for overloaded methods, but you'll need to tell the compiler which version you mean. To disambiguate a mock function (the one you specify inside the parentheses of `ON_CALL()`), see the "Selecting Between Overloaded Functions" section on this page; to disambiguate a fake function (the one you place inside `Invoke()`), use a `static_cast` to specify the function's type. + * Having to mix a mock and a fake is often a sign of something gone wrong. Perhaps you haven't got used to the interaction-based way of testing yet. Or perhaps your interface is taking on too many roles and should be split up. Therefore, **don't abuse this**. We would only recommend to do it as an intermediate step when you are refactoring your code. + +Regarding the tip on mixing a mock and a fake, here's an example on +why it may be a bad sign: Suppose you have a class `System` for +low-level system operations. In particular, it does file and I/O +operations. And suppose you want to test how your code uses `System` +to do I/O, and you just want the file operations to work normally. If +you mock out the entire `System` class, you'll have to provide a fake +implementation for the file operation part, which suggests that +`System` is taking on too many roles. + +Instead, you can define a `FileOps` interface and an `IOOps` interface +and split `System`'s functionalities into the two. Then you can mock +`IOOps` without mocking `FileOps`. + +## Delegating Calls to a Real Object ## + +When using testing doubles (mocks, fakes, stubs, and etc), sometimes +their behaviors will differ from those of the real objects. This +difference could be either intentional (as in simulating an error such +that you can test the error handling code) or unintentional. If your +mocks have different behaviors than the real objects by mistake, you +could end up with code that passes the tests but fails in production. + +You can use the _delegating-to-real_ technique to ensure that your +mock has the same behavior as the real object while retaining the +ability to validate calls. This technique is very similar to the +delegating-to-fake technique, the difference being that we use a real +object instead of a fake. Here's an example: + +``` +using ::testing::_; +using ::testing::AtLeast; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MockFoo() { + // By default, all calls are delegated to the real object. + ON_CALL(*this, DoThis()) + .WillByDefault(Invoke(&real_, &Foo::DoThis)); + ON_CALL(*this, DoThat(_)) + .WillByDefault(Invoke(&real_, &Foo::DoThat)); + ... + } + MOCK_METHOD0(DoThis, ...); + MOCK_METHOD1(DoThat, ...); + ... + private: + Foo real_; +}; +... + + MockFoo mock; + + EXPECT_CALL(mock, DoThis()) + .Times(3); + EXPECT_CALL(mock, DoThat("Hi")) + .Times(AtLeast(1)); + ... use mock in test ... +``` + +With this, Google Mock will verify that your code made the right calls +(with the right arguments, in the right order, called the right number +of times, etc), and a real object will answer the calls (so the +behavior will be the same as in production). This gives you the best +of both worlds. + +## Delegating Calls to a Parent Class ## + +Ideally, you should code to interfaces, whose methods are all pure +virtual. In reality, sometimes you do need to mock a virtual method +that is not pure (i.e, it already has an implementation). For example: + +``` +class Foo { + public: + virtual ~Foo(); + + virtual void Pure(int n) = 0; + virtual int Concrete(const char* str) { ... } +}; + +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); +}; +``` + +Sometimes you may want to call `Foo::Concrete()` instead of +`MockFoo::Concrete()`. Perhaps you want to do it as part of a stub +action, or perhaps your test doesn't need to mock `Concrete()` at all +(but it would be oh-so painful to have to define a new mock class +whenever you don't need to mock one of its methods). + +The trick is to leave a back door in your mock class for accessing the +real methods in the base class: + +``` +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); + + // Use this to call Concrete() defined in Foo. + int FooConcrete(const char* str) { return Foo::Concrete(str); } +}; +``` + +Now, you can call `Foo::Concrete()` inside an action by: + +``` +using ::testing::_; +using ::testing::Invoke; +... + EXPECT_CALL(foo, Concrete(_)) + .WillOnce(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +or tell the mock object that you don't want to mock `Concrete()`: + +``` +using ::testing::Invoke; +... + ON_CALL(foo, Concrete(_)) + .WillByDefault(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +(Why don't we just write `Invoke(&foo, &Foo::Concrete)`? If you do +that, `MockFoo::Concrete()` will be called (and cause an infinite +recursion) since `Foo::Concrete()` is virtual. That's just how C++ +works.) + +# Using Matchers # + +## Matching Argument Values Exactly ## + +You can specify exactly which arguments a mock method is expecting: + +``` +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(5)) + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", bar)); +``` + +## Using Simple Matchers ## + +You can use matchers to match arguments that have a certain property: + +``` +using ::testing::Ge; +using ::testing::NotNull; +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(Ge(5))) // The argument must be >= 5. + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", NotNull())); + // The second argument must not be NULL. +``` + +A frequently used matcher is `_`, which matches anything: + +``` +using ::testing::_; +using ::testing::NotNull; +... + EXPECT_CALL(foo, DoThat(_, NotNull())); +``` + +## Combining Matchers ## + +You can build complex matchers from existing ones using `AllOf()`, +`AnyOf()`, and `Not()`: + +``` +using ::testing::AllOf; +using ::testing::Gt; +using ::testing::HasSubstr; +using ::testing::Ne; +using ::testing::Not; +... + // The argument must be > 5 and != 10. + EXPECT_CALL(foo, DoThis(AllOf(Gt(5), + Ne(10)))); + + // The first argument must not contain sub-string "blah". + EXPECT_CALL(foo, DoThat(Not(HasSubstr("blah")), + NULL)); +``` + +## Casting Matchers ## + +Google Mock matchers are statically typed, meaning that the compiler +can catch your mistake if you use a matcher of the wrong type (for +example, if you use `Eq(5)` to match a `string` argument). Good for +you! + +Sometimes, however, you know what you're doing and want the compiler +to give you some slack. One example is that you have a matcher for +`long` and the argument you want to match is `int`. While the two +types aren't exactly the same, there is nothing really wrong with +using a `Matcher` to match an `int` - after all, we can first +convert the `int` argument to a `long` before giving it to the +matcher. + +To support this need, Google Mock gives you the +`SafeMatcherCast(m)` function. It casts a matcher `m` to type +`Matcher`. To ensure safety, Google Mock checks that (let `U` be the +type `m` accepts): + + 1. Type `T` can be implicitly cast to type `U`; + 1. When both `T` and `U` are built-in arithmetic types (`bool`, integers, and floating-point numbers), the conversion from `T` to `U` is not lossy (in other words, any value representable by `T` can also be represented by `U`); and + 1. When `U` is a reference, `T` must also be a reference (as the underlying matcher may be interested in the address of the `U` value). + +The code won't compile if any of these conditions isn't met. + +Here's one example: + +``` +using ::testing::SafeMatcherCast; + +// A base class and a child class. +class Base { ... }; +class Derived : public Base { ... }; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(DoThis, void(Derived* derived)); +}; +... + + MockFoo foo; + // m is a Matcher we got from somewhere. + EXPECT_CALL(foo, DoThis(SafeMatcherCast(m))); +``` + +If you find `SafeMatcherCast(m)` too limiting, you can use a similar +function `MatcherCast(m)`. The difference is that `MatcherCast` works +as long as you can `static_cast` type `T` to type `U`. + +`MatcherCast` essentially lets you bypass C++'s type system +(`static_cast` isn't always safe as it could throw away information, +for example), so be careful not to misuse/abuse it. + +## Selecting Between Overloaded Functions ## + +If you expect an overloaded function to be called, the compiler may +need some help on which overloaded version it is. + +To disambiguate functions overloaded on the const-ness of this object, +use the `Const()` argument wrapper. + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + ... + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +... + + MockFoo foo; + Bar bar1, bar2; + EXPECT_CALL(foo, GetBar()) // The non-const GetBar(). + .WillOnce(ReturnRef(bar1)); + EXPECT_CALL(Const(foo), GetBar()) // The const GetBar(). + .WillOnce(ReturnRef(bar2)); +``` + +(`Const()` is defined by Google Mock and returns a `const` reference +to its argument.) + +To disambiguate overloaded functions with the same number of arguments +but different argument types, you may need to specify the exact type +of a matcher, either by wrapping your matcher in `Matcher()`, or +using a matcher whose type is fixed (`TypedEq`, `An()`, +etc): + +``` +using ::testing::An; +using ::testing::Lt; +using ::testing::Matcher; +using ::testing::TypedEq; + +class MockPrinter : public Printer { + public: + MOCK_METHOD1(Print, void(int n)); + MOCK_METHOD1(Print, void(char c)); +}; + +TEST(PrinterTest, Print) { + MockPrinter printer; + + EXPECT_CALL(printer, Print(An())); // void Print(int); + EXPECT_CALL(printer, Print(Matcher(Lt(5)))); // void Print(int); + EXPECT_CALL(printer, Print(TypedEq('a'))); // void Print(char); + + printer.Print(3); + printer.Print(6); + printer.Print('a'); +} +``` + +## Performing Different Actions Based on the Arguments ## + +When a mock method is called, the _last_ matching expectation that's +still active will be selected (think "newer overrides older"). So, you +can make a method do different things depending on its argument values +like this: + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Return; +... + // The default case. + EXPECT_CALL(foo, DoThis(_)) + .WillRepeatedly(Return('b')); + + // The more specific case. + EXPECT_CALL(foo, DoThis(Lt(5))) + .WillRepeatedly(Return('a')); +``` + +Now, if `foo.DoThis()` is called with a value less than 5, `'a'` will +be returned; otherwise `'b'` will be returned. + +## Matching Multiple Arguments as a Whole ## + +Sometimes it's not enough to match the arguments individually. For +example, we may want to say that the first argument must be less than +the second argument. The `With()` clause allows us to match +all arguments of a mock function as a whole. For example, + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Ne; +... + EXPECT_CALL(foo, InRange(Ne(0), _)) + .With(Lt()); +``` + +says that the first argument of `InRange()` must not be 0, and must be +less than the second argument. + +The expression inside `With()` must be a matcher of type +`Matcher >`, where `A1`, ..., `An` are the +types of the function arguments. + +You can also write `AllArgs(m)` instead of `m` inside `.With()`. The +two forms are equivalent, but `.With(AllArgs(Lt()))` is more readable +than `.With(Lt())`. + +You can use `Args(m)` to match the `n` selected arguments +against `m`. For example, + +``` +using ::testing::_; +using ::testing::AllOf; +using ::testing::Args; +using ::testing::Lt; +... + EXPECT_CALL(foo, Blah(_, _, _)) + .With(AllOf(Args<0, 1>(Lt()), Args<1, 2>(Lt()))); +``` + +says that `Blah()` will be called with arguments `x`, `y`, and `z` where +`x < y < z`. + +As a convenience and example, Google Mock provides some matchers for +2-tuples, including the `Lt()` matcher above. See the [CheatSheet](V1_5_CheatSheet.md) for +the complete list. + +## Using Matchers as Predicates ## + +Have you noticed that a matcher is just a fancy predicate that also +knows how to describe itself? Many existing algorithms take predicates +as arguments (e.g. those defined in STL's `` header), and +it would be a shame if Google Mock matchers are not allowed to +participate. + +Luckily, you can use a matcher where a unary predicate functor is +expected by wrapping it inside the `Matches()` function. For example, + +``` +#include +#include + +std::vector v; +... +// How many elements in v are >= 10? +const int count = count_if(v.begin(), v.end(), Matches(Ge(10))); +``` + +Since you can build complex matchers from simpler ones easily using +Google Mock, this gives you a way to conveniently construct composite +predicates (doing the same using STL's `` header is just +painful). For example, here's a predicate that's satisfied by any +number that is >= 0, <= 100, and != 50: + +``` +Matches(AllOf(Ge(0), Le(100), Ne(50))) +``` + +## Using Matchers in Google Test Assertions ## + +Since matchers are basically predicates that also know how to describe +themselves, there is a way to take advantage of them in +[Google Test](http://code.google.com/p/googletest/) assertions. It's +called `ASSERT_THAT` and `EXPECT_THAT`: + +``` + ASSERT_THAT(value, matcher); // Asserts that value matches matcher. + EXPECT_THAT(value, matcher); // The non-fatal version. +``` + +For example, in a Google Test test you can write: + +``` +#include + +using ::testing::AllOf; +using ::testing::Ge; +using ::testing::Le; +using ::testing::MatchesRegex; +using ::testing::StartsWith; +... + + EXPECT_THAT(Foo(), StartsWith("Hello")); + EXPECT_THAT(Bar(), MatchesRegex("Line \\d+")); + ASSERT_THAT(Baz(), AllOf(Ge(5), Le(10))); +``` + +which (as you can probably guess) executes `Foo()`, `Bar()`, and +`Baz()`, and verifies that: + + * `Foo()` returns a string that starts with `"Hello"`. + * `Bar()` returns a string that matches regular expression `"Line \\d+"`. + * `Baz()` returns a number in the range [5, 10]. + +The nice thing about these macros is that _they read like +English_. They generate informative messages too. For example, if the +first `EXPECT_THAT()` above fails, the message will be something like: + +``` +Value of: Foo() + Actual: "Hi, world!" +Expected: starts with "Hello" +``` + +**Credit:** The idea of `(ASSERT|EXPECT)_THAT` was stolen from the +[Hamcrest](http://code.google.com/p/hamcrest/) project, which adds +`assertThat()` to JUnit. + +## Using Predicates as Matchers ## + +Google Mock provides a built-in set of matchers. In case you find them +lacking, you can use an arbitray unary predicate function or functor +as a matcher - as long as the predicate accepts a value of the type +you want. You do this by wrapping the predicate inside the `Truly()` +function, for example: + +``` +using ::testing::Truly; + +int IsEven(int n) { return (n % 2) == 0 ? 1 : 0; } +... + + // Bar() must be called with an even number. + EXPECT_CALL(foo, Bar(Truly(IsEven))); +``` + +Note that the predicate function / functor doesn't have to return +`bool`. It works as long as the return value can be used as the +condition in statement `if (condition) ...`. + +## Matching Arguments that Are Not Copyable ## + +When you do an `EXPECT_CALL(mock_obj, Foo(bar))`, Google Mock saves +away a copy of `bar`. When `Foo()` is called later, Google Mock +compares the argument to `Foo()` with the saved copy of `bar`. This +way, you don't need to worry about `bar` being modified or destroyed +after the `EXPECT_CALL()` is executed. The same is true when you use +matchers like `Eq(bar)`, `Le(bar)`, and so on. + +But what if `bar` cannot be copied (i.e. has no copy constructor)? You +could define your own matcher function and use it with `Truly()`, as +the previous couple of recipes have shown. Or, you may be able to get +away from it if you can guarantee that `bar` won't be changed after +the `EXPECT_CALL()` is executed. Just tell Google Mock that it should +save a reference to `bar`, instead of a copy of it. Here's how: + +``` +using ::testing::Eq; +using ::testing::ByRef; +using ::testing::Lt; +... + // Expects that Foo()'s argument == bar. + EXPECT_CALL(mock_obj, Foo(Eq(ByRef(bar)))); + + // Expects that Foo()'s argument < bar. + EXPECT_CALL(mock_obj, Foo(Lt(ByRef(bar)))); +``` + +Remember: if you do this, don't change `bar` after the +`EXPECT_CALL()`, or the result is undefined. + +## Validating a Member of an Object ## + +Often a mock function takes a reference to object as an argument. When +matching the argument, you may not want to compare the entire object +against a fixed object, as that may be over-specification. Instead, +you may need to validate a certain member variable or the result of a +certain getter method of the object. You can do this with `Field()` +and `Property()`. More specifically, + +``` +Field(&Foo::bar, m) +``` + +is a matcher that matches a `Foo` object whose `bar` member variable +satisfies matcher `m`. + +``` +Property(&Foo::baz, m) +``` + +is a matcher that matches a `Foo` object whose `baz()` method returns +a value that satisfies matcher `m`. + +For example: + +> | `Field(&Foo::number, Ge(3))` | Matches `x` where `x.number >= 3`. | +|:-----------------------------|:-----------------------------------| +> | `Property(&Foo::name, StartsWith("John "))` | Matches `x` where `x.name()` starts with `"John "`. | + +Note that in `Property(&Foo::baz, ...)`, method `baz()` must take no +argument and be declared as `const`. + +BTW, `Field()` and `Property()` can also match plain pointers to +objects. For instance, + +``` +Field(&Foo::number, Ge(3)) +``` + +matches a plain pointer `p` where `p->number >= 3`. If `p` is `NULL`, +the match will always fail regardless of the inner matcher. + +What if you want to validate more than one members at the same time? +Remember that there is `AllOf()`. + +## Validating the Value Pointed to by a Pointer Argument ## + +C++ functions often take pointers as arguments. You can use matchers +like `NULL`, `NotNull()`, and other comparison matchers to match a +pointer, but what if you want to make sure the value _pointed to_ by +the pointer, instead of the pointer itself, has a certain property? +Well, you can use the `Pointee(m)` matcher. + +`Pointee(m)` matches a pointer iff `m` matches the value the pointer +points to. For example: + +``` +using ::testing::Ge; +using ::testing::Pointee; +... + EXPECT_CALL(foo, Bar(Pointee(Ge(3)))); +``` + +expects `foo.Bar()` to be called with a pointer that points to a value +greater than or equal to 3. + +One nice thing about `Pointee()` is that it treats a `NULL` pointer as +a match failure, so you can write `Pointee(m)` instead of + +``` + AllOf(NotNull(), Pointee(m)) +``` + +without worrying that a `NULL` pointer will crash your test. + +Also, did we tell you that `Pointee()` works with both raw pointers +**and** smart pointers (`linked_ptr`, `shared_ptr`, `scoped_ptr`, and +etc)? + +What if you have a pointer to pointer? You guessed it - you can use +nested `Pointee()` to probe deeper inside the value. For example, +`Pointee(Pointee(Lt(3)))` matches a pointer that points to a pointer +that points to a number less than 3 (what a mouthful...). + +## Testing a Certain Property of an Object ## + +Sometimes you want to specify that an object argument has a certain +property, but there is no existing matcher that does this. If you want +good error messages, you should define a matcher. If you want to do it +quick and dirty, you could get away with writing an ordinary function. + +Let's say you have a mock function that takes an object of type `Foo`, +which has an `int bar()` method and an `int baz()` method, and you +want to constrain that the argument's `bar()` value plus its `baz()` +value is a given number. Here's how you can define a matcher to do it: + +``` +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class BarPlusBazEqMatcher : public MatcherInterface { + public: + explicit BarPlusBazEqMatcher(int expected_sum) + : expected_sum_(expected_sum) {} + + virtual bool MatchAndExplain(const Foo& foo, + MatchResultListener* listener) const { + return (foo.bar() + foo.baz()) == expected_sum_; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "bar() + baz() equals " << expected_sum_; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "bar() + baz() does not equal " << expected_sum_; + } + private: + const int expected_sum_; +}; + +inline Matcher BarPlusBazEq(int expected_sum) { + return MakeMatcher(new BarPlusBazEqMatcher(expected_sum)); +} + +... + + EXPECT_CALL(..., DoThis(BarPlusBazEq(5)))...; +``` + +## Matching Containers ## + +Sometimes an STL container (e.g. list, vector, map, ...) is passed to +a mock function and you may want to validate it. Since most STL +containers support the `==` operator, you can write +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. + +Sometimes, though, you may want to be more flexible (for example, the +first element must be an exact match, but the second element can be +any positive number, and so on). Also, containers used in tests often +have a small number of elements, and having to define the expected +container out-of-line is a bit of a hassle. + +You can use the `ElementsAre()` matcher in such cases: + +``` +using ::testing::_; +using ::testing::ElementsAre; +using ::testing::Gt; +... + + MOCK_METHOD1(Foo, void(const vector& numbers)); +... + + EXPECT_CALL(mock, Foo(ElementsAre(1, Gt(0), _, 5))); +``` + +The above matcher says that the container must have 4 elements, which +must be 1, greater than 0, anything, and 5 respectively. + +`ElementsAre()` is overloaded to take 0 to 10 arguments. If more are +needed, you can place them in a C-style array and use +`ElementsAreArray()` instead: + +``` +using ::testing::ElementsAreArray; +... + + // ElementsAreArray accepts an array of element values. + const int expected_vector1[] = { 1, 5, 2, 4, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector1))); + + // Or, an array of element matchers. + Matcher expected_vector2 = { 1, Gt(2), _, 3, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector2))); +``` + +In case the array needs to be dynamically created (and therefore the +array size cannot be inferred by the compiler), you can give +`ElementsAreArray()` an additional argument to specify the array size: + +``` +using ::testing::ElementsAreArray; +... + int* const expected_vector3 = new int[count]; + ... fill expected_vector3 with values ... + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector3, count))); +``` + +**Tips:** + + * `ElementAre*()` works with _any_ container that implements the STL iterator concept (i.e. it has a `const_iterator` type and supports `begin()/end()`) and supports `size()`, not just the ones defined in STL. It will even work with container types yet to be written - as long as they follows the above pattern. + * You can use nested `ElementAre*()` to match nested (multi-dimensional) containers. + * If the container is passed by pointer instead of by reference, just write `Pointee(ElementsAre*(...))`. + * The order of elements _matters_ for `ElementsAre*()`. Therefore don't use it with containers whose element order is undefined (e.g. `hash_map`). + +## Sharing Matchers ## + +Under the hood, a Google Mock matcher object consists of a pointer to +a ref-counted implementation object. Copying matchers is allowed and +very efficient, as only the pointer is copied. When the last matcher +that references the implementation object dies, the implementation +object will be deleted. + +Therefore, if you have some complex matcher that you want to use again +and again, there is no need to build it everytime. Just assign it to a +matcher variable and use that variable repeatedly! For example, + +``` + Matcher in_range = AllOf(Gt(5), Le(10)); + ... use in_range as a matcher in multiple EXPECT_CALLs ... +``` + +# Setting Expectations # + +## Ignoring Uninteresting Calls ## + +If you are not interested in how a mock method is called, just don't +say anything about it. In this case, if the method is ever called, +Google Mock will perform its default action to allow the test program +to continue. If you are not happy with the default action taken by +Google Mock, you can override it using `DefaultValue::Set()` +(described later in this document) or `ON_CALL()`. + +Please note that once you expressed interest in a particular mock +method (via `EXPECT_CALL()`), all invocations to it must match some +expectation. If this function is called but the arguments don't match +any `EXPECT_CALL()` statement, it will be an error. + +## Disallowing Unexpected Calls ## + +If a mock method shouldn't be called at all, explicitly say so: + +``` +using ::testing::_; +... + EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +If some calls to the method are allowed, but the rest are not, just +list all the expected calls: + +``` +using ::testing::AnyNumber; +using ::testing::Gt; +... + EXPECT_CALL(foo, Bar(5)); + EXPECT_CALL(foo, Bar(Gt(10))) + .Times(AnyNumber()); +``` + +A call to `foo.Bar()` that doesn't match any of the `EXPECT_CALL()` +statements will be an error. + +## Expecting Ordered Calls ## + +Although an `EXPECT_CALL()` statement defined earlier takes precedence +when Google Mock tries to match a function call with an expectation, +by default calls don't have to happen in the order `EXPECT_CALL()` +statements are written. For example, if the arguments match the +matchers in the third `EXPECT_CALL()`, but not those in the first two, +then the third expectation will be used. + +If you would rather have all calls occur in the order of the +expectations, put the `EXPECT_CALL()` statements in a block where you +define a variable of type `InSequence`: + +``` + using ::testing::_; + using ::testing::InSequence; + + { + InSequence s; + + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(bar, DoThat(_)) + .Times(2); + EXPECT_CALL(foo, DoThis(6)); + } +``` + +In this example, we expect a call to `foo.DoThis(5)`, followed by two +calls to `bar.DoThat()` where the argument can be anything, which are +in turn followed by a call to `foo.DoThis(6)`. If a call occurred +out-of-order, Google Mock will report an error. + +## Expecting Partially Ordered Calls ## + +Sometimes requiring everything to occur in a predetermined order can +lead to brittle tests. For example, we may care about `A` occurring +before both `B` and `C`, but aren't interested in the relative order +of `B` and `C`. In this case, the test should reflect our real intent, +instead of being overly constraining. + +Google Mock allows you to impose an arbitrary DAG (directed acyclic +graph) on the calls. One way to express the DAG is to use the +[After](V1_5_CheatSheet#The_After_Clause.md) clause of `EXPECT_CALL`. + +Another way is via the `InSequence()` clause (not the same as the +`InSequence` class), which we borrowed from jMock 2. It's less +flexible than `After()`, but more convenient when you have long chains +of sequential calls, as it doesn't require you to come up with +different names for the expectations in the chains. Here's how it +works: + +If we view `EXPECT_CALL()` statements as nodes in a graph, and add an +edge from node A to node B wherever A must occur before B, we can get +a DAG. We use the term "sequence" to mean a directed path in this +DAG. Now, if we decompose the DAG into sequences, we just need to know +which sequences each `EXPECT_CALL()` belongs to in order to be able to +reconstruct the orginal DAG. + +So, to specify the partial order on the expectations we need to do two +things: first to define some `Sequence` objects, and then for each +`EXPECT_CALL()` say which `Sequence` objects it is part +of. Expectations in the same sequence must occur in the order they are +written. For example, + +``` + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(foo, A()) + .InSequence(s1, s2); + EXPECT_CALL(bar, B()) + .InSequence(s1); + EXPECT_CALL(bar, C()) + .InSequence(s2); + EXPECT_CALL(foo, D()) + .InSequence(s2); +``` + +specifies the following DAG (where `s1` is `A -> B`, and `s2` is `A -> +C -> D`): + +``` + +---> B + | + A ---| + | + +---> C ---> D +``` + +This means that A must occur before B and C, and C must occur before +D. There's no restriction about the order other than these. + +## Controlling When an Expectation Retires ## + +When a mock method is called, Google Mock only consider expectations +that are still active. An expectation is active when created, and +becomes inactive (aka _retires_) when a call that has to occur later +has occurred. For example, in + +``` + using ::testing::_; + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #1 + .Times(AnyNumber()) + .InSequence(s1, s2); + EXPECT_CALL(log, Log(WARNING, _, "Data set is empty.")) // #2 + .InSequence(s1); + EXPECT_CALL(log, Log(WARNING, _, "User not found.")) // #3 + .InSequence(s2); +``` + +as soon as either #2 or #3 is matched, #1 will retire. If a warning +`"File too large."` is logged after this, it will be an error. + +Note that an expectation doesn't retire automatically when it's +saturated. For example, + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")); // #2 +``` + +says that there will be exactly one warning with the message `"File +too large."`. If the second warning contains this message too, #2 will +match again and result in an upper-bound-violated error. + +If this is not what you want, you can ask an expectation to retire as +soon as it becomes saturated: + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #2 + .RetiresOnSaturation(); +``` + +Here #2 can be used only once, so if you have two warnings with the +message `"File too large."`, the first will match #2 and the second +will match #1 - there will be no error. + +# Using Actions # + +## Returning References from Mock Methods ## + +If a mock function's return type is a reference, you need to use +`ReturnRef()` instead of `Return()` to return a result: + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + public: + MOCK_METHOD0(GetBar, Bar&()); +}; +... + + MockFoo foo; + Bar bar; + EXPECT_CALL(foo, GetBar()) + .WillOnce(ReturnRef(bar)); +``` + +## Combining Actions ## + +Want to do more than one thing when a function is called? That's +fine. `DoAll()` allow you to do sequence of actions every time. Only +the return value of the last action in the sequence will be used. + +``` +using ::testing::DoAll; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Bar, bool(int n)); +}; +... + + EXPECT_CALL(foo, Bar(_)) + .WillOnce(DoAll(action_1, + action_2, + ... + action_n)); +``` + +## Mocking Side Effects ## + +Sometimes a method exhibits its effect not via returning a value but +via side effects. For example, it may change some global state or +modify an output argument. To mock side effects, in general you can +define your own action by implementing `::testing::ActionInterface`. + +If all you need to do is to change an output argument, the built-in +`SetArgumentPointee()` action is convenient: + +``` +using ::testing::SetArgumentPointee; + +class MockMutator : public Mutator { + public: + MOCK_METHOD2(Mutate, void(bool mutate, int* value)); + ... +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, Mutate(true, _)) + .WillOnce(SetArgumentPointee<1>(5)); +``` + +In this example, when `mutator.Mutate()` is called, we will assign 5 +to the `int` variable pointed to by argument #1 +(0-based). + +`SetArgumentPointee()` conveniently makes an internal copy of the +value you pass to it, removing the need to keep the value in scope and +alive. The implication however is that the value must have a copy +constructor and assignment operator. + +If the mock method also needs to return a value as well, you can chain +`SetArgumentPointee()` with `Return()` using `DoAll()`: + +``` +using ::testing::_; +using ::testing::Return; +using ::testing::SetArgumentPointee; + +class MockMutator : public Mutator { + public: + ... + MOCK_METHOD1(MutateInt, bool(int* value)); +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, MutateInt(_)) + .WillOnce(DoAll(SetArgumentPointee<0>(5), + Return(true))); +``` + +If the output argument is an array, use the +`SetArrayArgument(first, last)` action instead. It copies the +elements in source range `[first, last)` to the array pointed to by +the `N`-th (0-based) argument: + +``` +using ::testing::NotNull; +using ::testing::SetArrayArgument; + +class MockArrayMutator : public ArrayMutator { + public: + MOCK_METHOD2(Mutate, void(int* values, int num_values)); + ... +}; +... + + MockArrayMutator mutator; + int values[5] = { 1, 2, 3, 4, 5 }; + EXPECT_CALL(mutator, Mutate(NotNull(), 5)) + .WillOnce(SetArrayArgument<0>(values, values + 5)); +``` + +This also works when the argument is an output iterator: + +``` +using ::testing::_; +using ::testing::SeArrayArgument; + +class MockRolodex : public Rolodex { + public: + MOCK_METHOD1(GetNames, void(std::back_insert_iterator >)); + ... +}; +... + + MockRolodex rolodex; + vector names; + names.push_back("George"); + names.push_back("John"); + names.push_back("Thomas"); + EXPECT_CALL(rolodex, GetNames(_)) + .WillOnce(SetArrayArgument<0>(names.begin(), names.end())); +``` + +## Changing a Mock Object's Behavior Based on the State ## + +If you expect a call to change the behavior of a mock object, you can use `::testing::InSequence` to specify different behaviors before and after the call: + +``` +using ::testing::InSequence; +using ::testing::Return; + +... + { + InSequence seq; + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(true)); + EXPECT_CALL(my_mock, Flush()); + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(false)); + } + my_mock.FlushIfDirty(); +``` + +This makes `my_mock.IsDirty()` return `true` before `my_mock.Flush()` is called and return `false` afterwards. + +If the behavior change is more complex, you can store the effects in a variable and make a mock method get its return value from that variable: + +``` +using ::testing::_; +using ::testing::SaveArg; +using ::testing::Return; + +ACTION_P(ReturnPointee, p) { return *p; } +... + int previous_value = 0; + EXPECT_CALL(my_mock, GetPrevValue()) + .WillRepeatedly(ReturnPointee(&previous_value)); + EXPECT_CALL(my_mock, UpdateValue(_)) + .WillRepeatedly(SaveArg<0>(&previous_value)); + my_mock.DoSomethingToUpdateValue(); +``` + +Here `my_mock.GetPrevValue()` will always return the argument of the last `UpdateValue()` call. + +## Setting the Default Value for a Return Type ## + +If a mock method's return type is a built-in C++ type or pointer, by +default it will return 0 when invoked. You only need to specify an +action if this default value doesn't work for you. + +Sometimes, you may want to change this default value, or you may want +to specify a default value for types Google Mock doesn't know +about. You can do this using the `::testing::DefaultValue` class +template: + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD0(CalculateBar, Bar()); +}; +... + + Bar default_bar; + // Sets the default return value for type Bar. + DefaultValue::Set(default_bar); + + MockFoo foo; + + // We don't need to specify an action here, as the default + // return value works for us. + EXPECT_CALL(foo, CalculateBar()); + + foo.CalculateBar(); // This should return default_bar. + + // Unsets the default return value. + DefaultValue::Clear(); +``` + +Please note that changing the default value for a type can make you +tests hard to understand. We recommend you to use this feature +judiciously. For example, you may want to make sure the `Set()` and +`Clear()` calls are right next to the code that uses your mock. + +## Setting the Default Actions for a Mock Method ## + +You've learned how to change the default value of a given +type. However, this may be too coarse for your purpose: perhaps you +have two mock methods with the same return type and you want them to +have different behaviors. The `ON_CALL()` macro allows you to +customize your mock's behavior at the method level: + +``` +using ::testing::_; +using ::testing::AnyNumber; +using ::testing::Gt; +using ::testing::Return; +... + ON_CALL(foo, Sign(_)) + .WillByDefault(Return(-1)); + ON_CALL(foo, Sign(0)) + .WillByDefault(Return(0)); + ON_CALL(foo, Sign(Gt(0))) + .WillByDefault(Return(1)); + + EXPECT_CALL(foo, Sign(_)) + .Times(AnyNumber()); + + foo.Sign(5); // This should return 1. + foo.Sign(-9); // This should return -1. + foo.Sign(0); // This should return 0. +``` + +As you may have guessed, when there are more than one `ON_CALL()` +statements, the news order take precedence over the older ones. In +other words, the **last** one that matches the function arguments will +be used. This matching order allows you to set up the common behavior +in a mock object's constructor or the test fixture's set-up phase and +specialize the mock's behavior later. + +## Using Functions/Methods/Functors as Actions ## + +If the built-in actions don't suit you, you can easily use an existing +function, method, or functor as an action: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(Sum, int(int x, int y)); + MOCK_METHOD1(ComplexJob, bool(int x)); +}; + +int CalculateSum(int x, int y) { return x + y; } + +class Helper { + public: + bool ComplexJob(int x); +}; +... + + MockFoo foo; + Helper helper; + EXPECT_CALL(foo, Sum(_, _)) + .WillOnce(Invoke(CalculateSum)); + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(Invoke(&helper, &Helper::ComplexJob)); + + foo.Sum(5, 6); // Invokes CalculateSum(5, 6). + foo.ComplexJob(10); // Invokes helper.ComplexJob(10); +``` + +The only requirement is that the type of the function, etc must be +_compatible_ with the signature of the mock function, meaning that the +latter's arguments can be implicitly converted to the corresponding +arguments of the former, and the former's return type can be +implicitly converted to that of the latter. So, you can invoke +something whose type is _not_ exactly the same as the mock function, +as long as it's safe to do so - nice, huh? + +## Invoking a Function/Method/Functor Without Arguments ## + +`Invoke()` is very useful for doing actions that are more complex. It +passes the mock function's arguments to the function or functor being +invoked such that the callee has the full context of the call to work +with. If the invoked function is not interested in some or all of the +arguments, it can simply ignore them. + +Yet, a common pattern is that a test author wants to invoke a function +without the arguments of the mock function. `Invoke()` allows her to +do that using a wrapper function that throws away the arguments before +invoking an underlining nullary function. Needless to say, this can be +tedious and obscures the intent of the test. + +`InvokeWithoutArgs()` solves this problem. It's like `Invoke()` except +that it doesn't pass the mock function's arguments to the +callee. Here's an example: + +``` +using ::testing::_; +using ::testing::InvokeWithoutArgs; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(ComplexJob, bool(int n)); +}; + +bool Job1() { ... } +... + + MockFoo foo; + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(InvokeWithoutArgs(Job1)); + + foo.ComplexJob(10); // Invokes Job1(). +``` + +## Invoking an Argument of the Mock Function ## + +Sometimes a mock function will receive a function pointer or a functor +(in other words, a "callable") as an argument, e.g. + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, bool(int n, bool (*fp)(int))); +}; +``` + +and you may want to invoke this callable argument: + +``` +using ::testing::_; +... + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(...); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +Arghh, you need to refer to a mock function argument but C++ has no +lambda (yet), so you have to define your own action. :-( Or do you +really? + +Well, Google Mock has an action to solve _exactly_ this problem: + +``` + InvokeArgument(arg_1, arg_2, ..., arg_m) +``` + +will invoke the `N`-th (0-based) argument the mock function receives, +with `arg_1`, `arg_2`, ..., and `arg_m`. No matter if the argument is +a function pointer or a functor, Google Mock handles them both. + +With that, you could write: + +``` +using ::testing::_; +using ::testing::InvokeArgument; +... + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(InvokeArgument<1>(5)); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +What if the callable takes an argument by reference? No problem - just +wrap it inside `ByRef()`: + +``` +... + MOCK_METHOD1(Bar, bool(bool (*fp)(int, const Helper&))); +... +using ::testing::_; +using ::testing::ByRef; +using ::testing::InvokeArgument; +... + + MockFoo foo; + Helper helper; + ... + EXPECT_CALL(foo, Bar(_)) + .WillOnce(InvokeArgument<0>(5, ByRef(helper))); + // ByRef(helper) guarantees that a reference to helper, not a copy of it, + // will be passed to the callable. +``` + +What if the callable takes an argument by reference and we do **not** +wrap the argument in `ByRef()`? Then `InvokeArgument()` will _make a +copy_ of the argument, and pass a _reference to the copy_, instead of +a reference to the original value, to the callable. This is especially +handy when the argument is a temporary value: + +``` +... + MOCK_METHOD1(DoThat, bool(bool (*f)(const double& x, const string& s))); +... +using ::testing::_; +using ::testing::InvokeArgument; +... + + MockFoo foo; + ... + EXPECT_CALL(foo, DoThat(_)) + .WillOnce(InvokeArgument<0>(5.0, string("Hi"))); + // Will execute (*f)(5.0, string("Hi")), where f is the function pointer + // DoThat() receives. Note that the values 5.0 and string("Hi") are + // temporary and dead once the EXPECT_CALL() statement finishes. Yet + // it's fine to perform this action later, since a copy of the values + // are kept inside the InvokeArgument action. +``` + +## Ignoring an Action's Result ## + +Sometimes you have an action that returns _something_, but you need an +action that returns `void` (perhaps you want to use it in a mock +function that returns `void`, or perhaps it needs to be used in +`DoAll()` and it's not the last in the list). `IgnoreResult()` lets +you do that. For example: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Return; + +int Process(const MyData& data); +string DoSomething(); + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Abc, void(const MyData& data)); + MOCK_METHOD0(Xyz, bool()); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, Abc(_)) + // .WillOnce(Invoke(Process)); + // The above line won't compile as Process() returns int but Abc() needs + // to return void. + .WillOnce(IgnoreResult(Invoke(Process))); + + EXPECT_CALL(foo, Xyz()) + .WillOnce(DoAll(IgnoreResult(Invoke(DoSomething)), + // Ignores the string DoSomething() returns. + Return(true))); +``` + +Note that you **cannot** use `IgnoreResult()` on an action that already +returns `void`. Doing so will lead to ugly compiler errors. + +## Selecting an Action's Arguments ## + +Say you have a mock function `Foo()` that takes seven arguments, and +you have a custom action that you want to invoke when `Foo()` is +called. Trouble is, the custom action only wants three arguments: + +``` +using ::testing::_; +using ::testing::Invoke; +... + MOCK_METHOD7(Foo, bool(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight)); +... + +bool IsVisibleInQuadrant1(bool visible, int x, int y) { + return visible && x >= 0 && y >= 0; +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(IsVisibleInQuadrant1)); // Uh, won't compile. :-( +``` + +To please the compiler God, you can to define an "adaptor" that has +the same signature as `Foo()` and calls the custom action with the +right arguments: + +``` +using ::testing::_; +using ::testing::Invoke; + +bool MyIsVisibleInQuadrant1(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight) { + return IsVisibleInQuadrant1(visible, x, y); +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(MyIsVisibleInQuadrant1)); // Now it works. +``` + +But isn't this awkward? + +Google Mock provides a generic _action adaptor_, so you can spend your +time minding more important business than writing your own +adaptors. Here's the syntax: + +``` + WithArgs(action) +``` + +creates an action that passes the arguments of the mock function at +the given indices (0-based) to the inner `action` and performs +it. Using `WithArgs`, our original example can be written as: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::WithArgs; +... + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(WithArgs<0, 2, 3>(Invoke(IsVisibleInQuadrant1))); + // No need to define your own adaptor. +``` + +For better readability, Google Mock also gives you: + + * `WithoutArgs(action)` when the inner `action` takes _no_ argument, and + * `WithArg(action)` (no `s` after `Arg`) when the inner `action` takes _one_ argument. + +As you may have realized, `InvokeWithoutArgs(...)` is just syntactic +sugar for `WithoutArgs(Inovke(...))`. + +Here are more tips: + + * The inner action used in `WithArgs` and friends does not have to be `Invoke()` -- it can be anything. + * You can repeat an argument in the argument list if necessary, e.g. `WithArgs<2, 3, 3, 5>(...)`. + * You can change the order of the arguments, e.g. `WithArgs<3, 2, 1>(...)`. + * The types of the selected arguments do _not_ have to match the signature of the inner action exactly. It works as long as they can be implicitly converted to the corresponding arguments of the inner action. For example, if the 4-th argument of the mock function is an `int` and `my_action` takes a `double`, `WithArg<4>(my_action)` will work. + +## Ignoring Arguments in Action Functions ## + +The selecting-an-action's-arguments recipe showed us one way to make a +mock function and an action with incompatible argument lists fit +together. The downside is that wrapping the action in +`WithArgs<...>()` can get tedious for people writing the tests. + +If you are defining a function, method, or functor to be used with +`Invoke*()`, and you are not interested in some of its arguments, an +alternative to `WithArgs` is to declare the uninteresting arguments as +`Unused`. This makes the definition less cluttered and less fragile in +case the types of the uninteresting arguments change. It could also +increase the chance the action function can be reused. For example, +given + +``` + MOCK_METHOD3(Foo, double(const string& label, double x, double y)); + MOCK_METHOD3(Bar, double(int index, double x, double y)); +``` + +instead of + +``` +using ::testing::_; +using ::testing::Invoke; + +double DistanceToOriginWithLabel(const string& label, double x, double y) { + return sqrt(x*x + y*y); +} + +double DistanceToOriginWithIndex(int index, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOriginWithLabel)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOriginWithIndex)); +``` + +you could write + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Unused; + +double DistanceToOrigin(Unused, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOrigin)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOrigin)); +``` + +## Sharing Actions ## + +Just like matchers, a Google Mock action object consists of a pointer +to a ref-counted implementation object. Therefore copying actions is +also allowed and very efficient. When the last action that references +the implementation object dies, the implementation object will be +deleted. + +If you have some complex action that you want to use again and again, +you may not have to build it from scratch everytime. If the action +doesn't have an internal state (i.e. if it always does the same thing +no matter how many times it has been called), you can assign it to an +action variable and use that variable repeatedly. For example: + +``` + Action set_flag = DoAll(SetArgumentPointee<0>(5), + Return(true)); + ... use set_flag in .WillOnce() and .WillRepeatedly() ... +``` + +However, if the action has its own state, you may be surprised if you +share the action object. Suppose you have an action factory +`IncrementCounter(init)` which creates an action that increments and +returns a counter whose initial value is `init`, using two actions +created from the same expression and using a shared action will +exihibit different behaviors. Example: + +``` + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(IncrementCounter(0)); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(IncrementCounter(0)); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 1 - Blah() uses a different + // counter than Bar()'s. +``` + +versus + +``` + Action increment = IncrementCounter(0); + + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(increment); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(increment); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 3 - the counter is shared. +``` + +# Misc Recipes on Using Google Mock # + +## Forcing a Verification ## + +When it's being destoyed, your friendly mock object will automatically +verify that all expectations on it have been satisfied, and will +generate [Google Test](http://code.google.com/p/googletest/) failures +if not. This is convenient as it leaves you with one less thing to +worry about. That is, unless you are not sure if your mock object will +be destoyed. + +How could it be that your mock object won't eventually be destroyed? +Well, it might be created on the heap and owned by the code you are +testing. Suppose there's a bug in that code and it doesn't delete the +mock object properly - you could end up with a passing test when +there's actually a bug. + +Using a heap checker is a good idea and can alleviate the concern, but +its implementation may not be 100% reliable. So, sometimes you do want +to _force_ Google Mock to verify a mock object before it is +(hopefully) destructed. You can do this with +`Mock::VerifyAndClearExpectations(&mock_object)`: + +``` +TEST(MyServerTest, ProcessesRequest) { + using ::testing::Mock; + + MockFoo* const foo = new MockFoo; + EXPECT_CALL(*foo, ...)...; + // ... other expectations ... + + // server now owns foo. + MyServer server(foo); + server.ProcessRequest(...); + + // In case that server's destructor will forget to delete foo, + // this will verify the expectations anyway. + Mock::VerifyAndClearExpectations(foo); +} // server is destroyed when it goes out of scope here. +``` + +**Tip:** The `Mock::VerifyAndClearExpectations()` function returns a +`bool` to indicate whether the verification was successful (`true` for +yes), so you can wrap that function call inside a `ASSERT_TRUE()` if +there is no point going further when the verification has failed. + +## Using Check Points ## + +Sometimes you may want to "reset" a mock object at various check +points in your test: at each check point, you verify that all existing +expectations on the mock object have been satisfied, and then you set +some new expectations on it as if it's newly created. This allows you +to work with a mock object in "phases" whose sizes are each +manageable. + +One such scenario is that in your test's `SetUp()` function, you may +want to put the object you are testing into a certain state, with the +help from a mock object. Once in the desired state, you want to clear +all expectations on the mock, such that in the `TEST_F` body you can +set fresh expectations on it. + +As you may have figured out, the `Mock::VerifyAndClearExpectations()` +function we saw in the previous recipe can help you here. Or, if you +are using `ON_CALL()` to set default actions on the mock object and +want to clear the default actions as well, use +`Mock::VerifyAndClear(&mock_object)` instead. This function does what +`Mock::VerifyAndClearExpectations(&mock_object)` does and returns the +same `bool`, **plus** it clears the `ON_CALL()` statements on +`mock_object` too. + +Another trick you can use to achieve the same effect is to put the +expectations in sequences and insert calls to a dummy "check-point" +function at specific places. Then you can verify that the mock +function calls do happen at the right time. For example, if you are +exercising code: + +``` +Foo(1); +Foo(2); +Foo(3); +``` + +and want to verify that `Foo(1)` and `Foo(3)` both invoke +`mock.Bar("a")`, but `Foo(2)` doesn't invoke anything. You can write: + +``` +using ::testing::MockFunction; + +TEST(FooTest, InvokesBarCorrectly) { + MyMock mock; + // Class MockFunction has exactly one mock method. It is named + // Call() and has type F. + MockFunction check; + { + InSequence s; + + EXPECT_CALL(mock, Bar("a")); + EXPECT_CALL(check, Call("1")); + EXPECT_CALL(check, Call("2")); + EXPECT_CALL(mock, Bar("a")); + } + Foo(1); + check.Call("1"); + Foo(2); + check.Call("2"); + Foo(3); +} +``` + +The expectation spec says that the first `Bar("a")` must happen before +check point "1", the second `Bar("a")` must happen after check point "2", +and nothing should happen between the two check points. The explicit +check points make it easy to tell which `Bar("a")` is called by which +call to `Foo()`. + +## Mocking Destructors ## + +Sometimes you want to make sure a mock object is destructed at the +right time, e.g. after `bar->A()` is called but before `bar->B()` is +called. We already know that you can specify constraints on the order +of mock function calls, so all we need to do is to mock the destructor +of the mock function. + +This sounds simple, except for one problem: a destructor is a special +function with special syntax and special semantics, and the +`MOCK_METHOD0` macro doesn't work for it: + +``` + MOCK_METHOD0(~MockFoo, void()); // Won't compile! +``` + +The good news is that you can use a simple pattern to achieve the same +effect. First, add a mock function `Die()` to your mock class and call +it in the destructor, like this: + +``` +class MockFoo : public Foo { + ... + // Add the following two lines to the mock class. + MOCK_METHOD0(Die, void()); + virtual ~MockFoo() { Die(); } +}; +``` + +(If the name `Die()` clashes with an existing symbol, choose another +name.) Now, we have translated the problem of testing when a `MockFoo` +object dies to testing when its `Die()` method is called: + +``` + MockFoo* foo = new MockFoo; + MockBar* bar = new MockBar; + ... + { + InSequence s; + + // Expects *foo to die after bar->A() and before bar->B(). + EXPECT_CALL(*bar, A()); + EXPECT_CALL(*foo, Die()); + EXPECT_CALL(*bar, B()); + } +``` + +And that's that. + +## Using Google Mock and Threads ## + +**IMPORTANT NOTE:** What we describe in this recipe is **NOT** true yet, +as Google Mock is not currently thread-safe. However, all we need to +make it thread-safe is to implement some synchronization operations in +`` - and then the information below will +become true. + +In a **unit** test, it's best if you could isolate and test a piece of +code in a single-threaded context. That avoids race conditions and +dead locks, and makes debugging your test much easier. + +Yet many programs are multi-threaded, and sometimes to test something +we need to pound on it from more than one thread. Google Mock works +for this purpose too. + +Remember the steps for using a mock: + + 1. Create a mock object `foo`. + 1. Set its default actions and expectations using `ON_CALL()` and `EXPECT_CALL()`. + 1. The code under test calls methods of `foo`. + 1. Optionally, verify and reset the mock. + 1. Destroy the mock yourself, or let the code under test destroy it. The destructor will automatically verify it. + +If you follow the following simple rules, your mocks and threads can +live happily togeter: + + * Execute your _test code_ (as opposed to the code being tested) in _one_ thread. This makes your test easy to follow. + * Obviously, you can do step #1 without locking. + * When doing step #2 and #5, make sure no other thread is accessing `foo`. Obvious too, huh? + * #3 and #4 can be done either in one thread or in multiple threads - anyway you want. Google Mock takes care of the locking, so you don't have to do any - unless required by your test logic. + +If you violate the rules (for example, if you set expectations on a +mock while another thread is calling its methods), you get undefined +behavior. That's not fun, so don't do it. + +Google Mock guarantees that the action for a mock function is done in +the same thread that called the mock function. For example, in + +``` + EXPECT_CALL(mock, Foo(1)) + .WillOnce(action1); + EXPECT_CALL(mock, Foo(2)) + .WillOnce(action2); +``` + +if `Foo(1)` is called in thread 1 and `Foo(2)` is called in thread 2, +Google Mock will execute `action1` in thread 1 and `action2` in thread +2. + +Google Mock does _not_ impose a sequence on actions performed in +different threads (doing so may create deadlocks as the actions may +need to cooperate). This means that the execution of `action1` and +`action2` in the above example _may_ interleave. If this is a problem, +you should add proper synchronization logic to `action1` and `action2` +to make the test thread-safe. + + +Also, remember that `DefaultValue` is a global resource that +potentially affects _all_ living mock objects in your +program. Naturally, you won't want to mess with it from multiple +threads or when there still are mocks in action. + +## Controlling How Much Information Google Mock Prints ## + +When Google Mock sees something that has the potential of being an +error (e.g. a mock function with no expectation is called, a.k.a. an +uninteresting call, which is allowed but perhaps you forgot to +explicitly ban the call), it prints some warning messages, including +the arguments of the function and the return value. Hopefully this +will remind you to take a look and see if there is indeed a problem. + +Sometimes you are confident that your tests are correct and may not +appreciate such friendly messages. Some other times, you are debugging +your tests or learning about the behavior of the code you are testing, +and wish you could observe every mock call that happens (including +argument values and the return value). Clearly, one size doesn't fit +all. + +You can control how much Google Mock tells you using the +`--gmock_verbose=LEVEL` command-line flag, where `LEVEL` is a string +with three possible values: + + * `info`: Google Mock will print all informational messages, warnings, and errors (most verbose). At this setting, Google Mock will also log any calls to the `ON_CALL/EXPECT_CALL` macros. + * `warning`: Google Mock will print both warnings and errors (less verbose). This is the default. + * `error`: Google Mock will print errors only (least verbose). + +Alternatively, you can adjust the value of that flag from within your +tests like so: + +``` + ::testing::FLAGS_gmock_verbose = "error"; +``` + +Now, judiciously use the right flag to enable Google Mock serve you better! + +## Running Tests in Emacs ## + +If you build and run your tests in Emacs, the source file locations of +Google Mock and [Google Test](http://code.google.com/p/googletest/) +errors will be highlighted. Just press `` on one of them and +you'll be taken to the offending line. Or, you can just type `C-x `` +to jump to the next error. + +To make it even easier, you can add the following lines to your +`~/.emacs` file: + +``` +(global-set-key "\M-m" 'compile) ; m is for make +(global-set-key [M-down] 'next-error) +(global-set-key [M-up] '(lambda () (interactive) (next-error -1))) +``` + +Then you can type `M-m` to start a build, or `M-up`/`M-down` to move +back and forth between errors. + +## Fusing Google Mock Source Files ## + +Google Mock's implementation consists of dozens of files (excluding +its own tests). Sometimes you may want them to be packaged up in +fewer files instead, such that you can easily copy them to a new +machine and start hacking there. For this we provide an experimental +Python script `fuse_gmock_files.py` in the `scripts/` directory +(starting with release 1.2.0). Assuming you have Python 2.4 or above +installed on your machine, just go to that directory and run +``` +python fuse_gmock_files.py OUTPUT_DIR +``` + +and you should see an `OUTPUT_DIR` directory being created with files +`gtest/gtest.h`, `gmock/gmock.h`, and `gmock-gtest-all.cc` in it. +These three files contain everything you need to use Google Mock (and +Google Test). Just copy them to anywhere you want and you are ready +to write tests and use mocks. You can use the +[scrpts/test/Makefile](http://code.google.com/p/googlemock/source/browse/trunk/scripts/test/Makefile) file as an example on how to compile your tests +against them. + +# Extending Google Mock # + +## Writing New Matchers Quickly ## + +The `MATCHER*` family of macros can be used to define custom matchers +easily. The syntax: + +``` +MATCHER(name, "description string") { statements; } +``` + +will define a matcher with the given name that executes the +statements, which must return a `bool` to indicate if the match +succeeds. Inside the statements, you can refer to the value being +matched by `arg`, and refer to its type by `arg_type`. + +The description string documents what the matcher does, and is used to +generate the failure message when the match fails. Since a +`MATCHER()` is usually defined in a header file shared by multiple C++ +source files, we require the description to be a C-string _literal_ to +avoid possible side effects. It can be empty (`""`), in which case +Google Mock will use the sequence of words in the matcher name as the +description. + +For example: +``` +MATCHER(IsDivisibleBy7, "") { return (arg % 7) == 0; } +``` +allows you to write +``` + // Expects mock_foo.Bar(n) to be called where n is divisible by 7. + EXPECT_CALL(mock_foo, Bar(IsDivisibleBy7())); +``` +or, +``` + // Verifies that the value of some_expression is divisible by 7. + EXPECT_THAT(some_expression, IsDivisibleBy7()); +``` +If the above assertion fails, it will print something like: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 +``` +where the description `"is divisible by 7"` is automatically calculated from the +matcher name `IsDivisibleBy7`. + +Optionally, you can stream additional information to a hidden argument +named `result_listener` to explain the match result. For example, a +better definition of `IsDivisibleBy7` is: +``` +MATCHER(IsDivisibleBy7, "") { + if ((arg % 7) == 0) + return true; + + *result_listener << "the remainder is " << (arg % 7); + return false; +} +``` + +With this definition, the above assertion will give a better message: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 (the remainder is 6) +``` + +You should let `MatchAndExplain()` print _any additional information_ +that can help a user understand the match result. Note that it should +explain why the match succeeds in case of a success (unless it's +obvious) - this is useful when the matcher is used inside +`Not()`. There is no need to print the argument value itself, as +Google Mock already prints it for you. + +**Notes:** + + 1. The type of the value being matched (`arg_type`) is determined by the context in which you use the matcher and is supplied to you by the compiler, so you don't need to worry about declaring it (nor can you). This allows the matcher to be polymorphic. For example, `IsDivisibleBy7()` can be used to match any type where the value of `(arg % 7) == 0` can be implicitly converted to a `bool`. In the `Bar(IsDivisibleBy7())` example above, if method `Bar()` takes an `int`, `arg_type` will be `int`; if it takes an `unsigned long`, `arg_type` will be `unsigned long`; and so on. + 1. Google Mock doesn't guarantee when or how many times a matcher will be invoked. Therefore the matcher logic must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). This requirement must be satisfied no matter how you define the matcher (e.g. using one of the methods described in the following recipes). In particular, a matcher can never call a mock function, as that will affect the state of the mock object and Google Mock. + +## Writing New Parameterized Matchers Quickly ## + +Sometimes you'll want to define a matcher that has parameters. For that you +can use the macro: +``` +MATCHER_P(name, param_name, "description string") { statements; } +``` + +For example: +``` +MATCHER_P(HasAbsoluteValue, value, "") { return abs(arg) == value; } +``` +will allow you to write: +``` + EXPECT_THAT(Blah("a"), HasAbsoluteValue(n)); +``` +which may lead to this message (assuming `n` is 10): +``` + Value of: Blah("a") + Expected: has absolute value 10 + Actual: -9 +``` + +Note that both the matcher description and its parameter are +printed, making the message human-friendly. + +In the matcher definition body, you can write `foo_type` to +reference the type of a parameter named `foo`. For example, in the +body of `MATCHER_P(HasAbsoluteValue, value)` above, you can write +`value_type` to refer to the type of `value`. + +Google Mock also provides `MATCHER_P2`, `MATCHER_P3`, ..., up to +`MATCHER_P10` to support multi-parameter matchers: +``` +MATCHER_Pk(name, param_1, ..., param_k, "description string") { statements; } +``` + +Please note that the custom description string is for a particular +**instance** of the matcher, where the parameters have been bound to +actual values. Therefore usually you'll want the parameter values to +be part of the description. Google Mock lets you do that using +Python-style interpolations. The following syntaxes are supported +currently: + +| `%%` | a single `%` character | +|:-----|:-----------------------| +| `%(*)s` | all parameters of the matcher printed as a tuple | +| `%(foo)s` | value of the matcher parameter named `foo` | + +For example, +``` + MATCHER_P2(InClosedRange, low, hi, "is in range [%(low)s, %(hi)s]") { + return low <= arg && arg <= hi; + } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the message: +``` + Expected: is in range [4, 6] +``` + +If you specify `""` as the description, the failure message will +contain the sequence of words in the matcher name followed by the +parameter values printed as a tuple. For example, +``` + MATCHER_P2(InClosedRange, low, hi, "") { ... } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the text: +``` + Expected: in closed range (4, 6) +``` + +For the purpose of typing, you can view +``` +MATCHER_Pk(Foo, p1, ..., pk, "description string") { ... } +``` +as shorthand for +``` +template +FooMatcherPk +Foo(p1_type p1, ..., pk_type pk) { ... } +``` + +When you write `Foo(v1, ..., vk)`, the compiler infers the types of +the parameters `v1`, ..., and `vk` for you. If you are not happy with +the result of the type inference, you can specify the types by +explicitly instantiating the template, as in `Foo(5, false)`. +As said earlier, you don't get to (or need to) specify +`arg_type` as that's determined by the context in which the matcher +is used. + +You can assign the result of expression `Foo(p1, ..., pk)` to a +variable of type `FooMatcherPk`. This can be +useful when composing matchers. Matchers that don't have a parameter +or have only one parameter have special types: you can assign `Foo()` +to a `FooMatcher`-typed variable, and assign `Foo(p)` to a +`FooMatcherP`-typed variable. + +While you can instantiate a matcher template with reference types, +passing the parameters by pointer usually makes your code more +readable. If, however, you still want to pass a parameter by +reference, be aware that in the failure message generated by the +matcher you will see the value of the referenced object but not its +address. + +You can overload matchers with different numbers of parameters: +``` +MATCHER_P(Blah, a, "description string 1") { ... } +MATCHER_P2(Blah, a, b, "description string 2") { ... } +``` + +While it's tempting to always use the `MATCHER*` macros when defining +a new matcher, you should also consider implementing +`MatcherInterface` or using `MakePolymorphicMatcher()` instead (see +the recipes that follow), especially if you need to use the matcher a +lot. While these approaches require more work, they give you more +control on the types of the value being matched and the matcher +parameters, which in general leads to better compiler error messages +that pay off in the long run. They also allow overloading matchers +based on parameter types (as opposed to just based on the number of +parameters). + +## Writing New Monomorphic Matchers ## + +A matcher of argument type `T` implements +`::testing::MatcherInterface` and does two things: it tests whether a +value of type `T` matches the matcher, and can describe what kind of +values it matches. The latter ability is used for generating readable +error messages when expectations are violated. + +The interface looks like this: + +``` +class MatchResultListener { + public: + ... + // Streams x to the underlying ostream; does nothing if the ostream + // is NULL. + template + MatchResultListener& operator<<(const T& x); + + // Returns the underlying ostream. + ::std::ostream* stream(); +}; + +template +class MatcherInterface { + public: + virtual ~MatcherInterface(); + + // Returns true iff the matcher matches x; also explains the match + // result to 'listener'. + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const = 0; + + // Describes this matcher to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; + + // Describes the negation of this matcher to an ostream. + virtual void DescribeNegationTo(::std::ostream* os) const; +}; +``` + +If you need a custom matcher but `Truly()` is not a good option (for +example, you may not be happy with the way `Truly(predicate)` +describes itself, or you may want your matcher to be polymorphic as +`Eq(value)` is), you can define a matcher to do whatever you want in +two steps: first implement the matcher interface, and then define a +factory function to create a matcher instance. The second step is not +strictly needed but it makes the syntax of using the matcher nicer. + +For example, you can define a matcher to test whether an `int` is +divisible by 7 and then use it like this: +``` +using ::testing::MakeMatcher; +using ::testing::Matcher; +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, MatchResultListener* listener) const { + return (n % 7) == 0; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "is divisible by 7"; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "is not divisible by 7"; + } +}; + +inline Matcher DivisibleBy7() { + return MakeMatcher(new DivisibleBy7Matcher); +} +... + + EXPECT_CALL(foo, Bar(DivisibleBy7())); +``` + +You may improve the matcher message by streaming additional +information to the `listener` argument in `MatchAndExplain()`: + +``` +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, + MatchResultListener* listener) const { + const int remainder = n % 7; + if (remainder != 0) { + *listener << "the remainder is " << remainder; + } + return remainder == 0; + } + ... +}; +``` + +Then, `EXPECT_THAT(x, DivisibleBy7());` may general a message like this: +``` +Value of: x +Expected: is divisible by 7 + Actual: 23 (the remainder is 2) +``` + +## Writing New Polymorphic Matchers ## + +You've learned how to write your own matchers in the previous +recipe. Just one problem: a matcher created using `MakeMatcher()` only +works for one particular type of arguments. If you want a +_polymorphic_ matcher that works with arguments of several types (for +instance, `Eq(x)` can be used to match a `value` as long as `value` == +`x` compiles -- `value` and `x` don't have to share the same type), +you can learn the trick from `` but it's a bit +involved. + +Fortunately, most of the time you can define a polymorphic matcher +easily with the help of `MakePolymorphicMatcher()`. Here's how you can +define `NotNull()` as an example: + +``` +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +using ::testing::NotNull; +using ::testing::PolymorphicMatcher; + +class NotNullMatcher { + public: + // To implement a polymorphic matcher, first define a COPYABLE class + // that has three members MatchAndExplain(), DescribeTo(), and + // DescribeNegationTo(), like the following. + + // In this example, we want to use NotNull() with any pointer, so + // MatchAndExplain() accepts a pointer of any type as its first argument. + // In general, you can define MatchAndExplain() as an ordinary method or + // a method template, or even overload it. + template + bool MatchAndExplain(T* p, + MatchResultListener* /* listener */) const { + return p != NULL; + } + + // Describes the property of a value matching this matcher. + void DescribeTo(::std::ostream* os) const { *os << "is not NULL"; } + + // Describes the property of a value NOT matching this matcher. + void DescribeNegationTo(::std::ostream* os) const { *os << "is NULL"; } +}; + +// To construct a polymorphic matcher, pass an instance of the class +// to MakePolymorphicMatcher(). Note the return type. +inline PolymorphicMatcher NotNull() { + return MakePolymorphicMatcher(NotNullMatcher()); +} +... + + EXPECT_CALL(foo, Bar(NotNull())); // The argument must be a non-NULL pointer. +``` + +**Note:** Your polymorphic matcher class does **not** need to inherit from +`MatcherInterface` or any other class, and its methods do **not** need +to be virtual. + +Like in a monomorphic matcher, you may explain the match result by +streaming additional information to the `listener` argument in +`MatchAndExplain()`. + +## Writing New Cardinalities ## + +A cardinality is used in `Times()` to tell Google Mock how many times +you expect a call to occur. It doesn't have to be exact. For example, +you can say `AtLeast(5)` or `Between(2, 4)`. + +If the built-in set of cardinalities doesn't suit you, you are free to +define your own by implementing the following interface (in namespace +`testing`): + +``` +class CardinalityInterface { + public: + virtual ~CardinalityInterface(); + + // Returns true iff call_count calls will satisfy this cardinality. + virtual bool IsSatisfiedByCallCount(int call_count) const = 0; + + // Returns true iff call_count calls will saturate this cardinality. + virtual bool IsSaturatedByCallCount(int call_count) const = 0; + + // Describes self to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; +}; +``` + +For example, to specify that a call must occur even number of times, +you can write + +``` +using ::testing::Cardinality; +using ::testing::CardinalityInterface; +using ::testing::MakeCardinality; + +class EvenNumberCardinality : public CardinalityInterface { + public: + virtual bool IsSatisfiedByCallCount(int call_count) const { + return (call_count % 2) == 0; + } + + virtual bool IsSaturatedByCallCount(int call_count) const { + return false; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "called even number of times"; + } +}; + +Cardinality EvenNumber() { + return MakeCardinality(new EvenNumberCardinality); +} +... + + EXPECT_CALL(foo, Bar(3)) + .Times(EvenNumber()); +``` + +## Writing New Actions Quickly ## + +If the built-in actions don't work for you, and you find it +inconvenient to use `Invoke()`, you can use a macro from the `ACTION*` +family to quickly define a new action that can be used in your code as +if it's a built-in action. + +By writing +``` +ACTION(name) { statements; } +``` +in a namespace scope (i.e. not inside a class or function), you will +define an action with the given name that executes the statements. +The value returned by `statements` will be used as the return value of +the action. Inside the statements, you can refer to the K-th +(0-based) argument of the mock function as `argK`. For example: +``` +ACTION(IncrementArg1) { return ++(*arg1); } +``` +allows you to write +``` +... WillOnce(IncrementArg1()); +``` + +Note that you don't need to specify the types of the mock function +arguments. Rest assured that your code is type-safe though: +you'll get a compiler error if `*arg1` doesn't support the `++` +operator, or if the type of `++(*arg1)` isn't compatible with the mock +function's return type. + +Another example: +``` +ACTION(Foo) { + (*arg2)(5); + Blah(); + *arg1 = 0; + return arg0; +} +``` +defines an action `Foo()` that invokes argument #2 (a function pointer) +with 5, calls function `Blah()`, sets the value pointed to by argument +#1 to 0, and returns argument #0. + +For more convenience and flexibility, you can also use the following +pre-defined symbols in the body of `ACTION`: + +| `argK_type` | The type of the K-th (0-based) argument of the mock function | +|:------------|:-------------------------------------------------------------| +| `args` | All arguments of the mock function as a tuple | +| `args_type` | The type of all arguments of the mock function as a tuple | +| `return_type` | The return type of the mock function | +| `function_type` | The type of the mock function | + +For example, when using an `ACTION` as a stub action for mock function: +``` +int DoSomething(bool flag, int* ptr); +``` +we have: +| **Pre-defined Symbol** | **Is Bound To** | +|:-----------------------|:----------------| +| `arg0` | the value of `flag` | +| `arg0_type` | the type `bool` | +| `arg1` | the value of `ptr` | +| `arg1_type` | the type `int*` | +| `args` | the tuple `(flag, ptr)` | +| `args_type` | the type `std::tr1::tuple` | +| `return_type` | the type `int` | +| `function_type` | the type `int(bool, int*)` | + +## Writing New Parameterized Actions Quickly ## + +Sometimes you'll want to parameterize an action you define. For that +we have another macro +``` +ACTION_P(name, param) { statements; } +``` + +For example, +``` +ACTION_P(Add, n) { return arg0 + n; } +``` +will allow you to write +``` +// Returns argument #0 + 5. +... WillOnce(Add(5)); +``` + +For convenience, we use the term _arguments_ for the values used to +invoke the mock function, and the term _parameters_ for the values +used to instantiate an action. + +Note that you don't need to provide the type of the parameter either. +Suppose the parameter is named `param`, you can also use the +Google-Mock-defined symbol `param_type` to refer to the type of the +parameter as inferred by the compiler. For example, in the body of +`ACTION_P(Add, n)` above, you can write `n_type` for the type of `n`. + +Google Mock also provides `ACTION_P2`, `ACTION_P3`, and etc to support +multi-parameter actions. For example, +``` +ACTION_P2(ReturnDistanceTo, x, y) { + double dx = arg0 - x; + double dy = arg1 - y; + return sqrt(dx*dx + dy*dy); +} +``` +lets you write +``` +... WillOnce(ReturnDistanceTo(5.0, 26.5)); +``` + +You can view `ACTION` as a degenerated parameterized action where the +number of parameters is 0. + +You can also easily define actions overloaded on the number of parameters: +``` +ACTION_P(Plus, a) { ... } +ACTION_P2(Plus, a, b) { ... } +``` + +## Restricting the Type of an Argument or Parameter in an ACTION ## + +For maximum brevity and reusability, the `ACTION*` macros don't ask +you to provide the types of the mock function arguments and the action +parameters. Instead, we let the compiler infer the types for us. + +Sometimes, however, we may want to be more explicit about the types. +There are several tricks to do that. For example: +``` +ACTION(Foo) { + // Makes sure arg0 can be converted to int. + int n = arg0; + ... use n instead of arg0 here ... +} + +ACTION_P(Bar, param) { + // Makes sure the type of arg1 is const char*. + ::testing::StaticAssertTypeEq(); + + // Makes sure param can be converted to bool. + bool flag = param; +} +``` +where `StaticAssertTypeEq` is a compile-time assertion in Google Test +that verifies two types are the same. + +## Writing New Action Templates Quickly ## + +Sometimes you want to give an action explicit template parameters that +cannot be inferred from its value parameters. `ACTION_TEMPLATE()` +supports that and can be viewed as an extension to `ACTION()` and +`ACTION_P*()`. + +The syntax: +``` +ACTION_TEMPLATE(ActionName, + HAS_m_TEMPLATE_PARAMS(kind1, name1, ..., kind_m, name_m), + AND_n_VALUE_PARAMS(p1, ..., p_n)) { statements; } +``` + +defines an action template that takes _m_ explicit template parameters +and _n_ value parameters, where _m_ is between 1 and 10, and _n_ is +between 0 and 10. `name_i` is the name of the i-th template +parameter, and `kind_i` specifies whether it's a `typename`, an +integral constant, or a template. `p_i` is the name of the i-th value +parameter. + +Example: +``` +// DuplicateArg(output) converts the k-th argument of the mock +// function to type T and copies it to *output. +ACTION_TEMPLATE(DuplicateArg, + // Note the comma between int and k: + HAS_2_TEMPLATE_PARAMS(int, k, typename, T), + AND_1_VALUE_PARAMS(output)) { + *output = T(std::tr1::get(args)); +} +``` + +To create an instance of an action template, write: +``` + ActionName(v1, ..., v_n) +``` +where the `t`s are the template arguments and the +`v`s are the value arguments. The value argument +types are inferred by the compiler. For example: +``` +using ::testing::_; +... + int n; + EXPECT_CALL(mock, Foo(_, _)) + .WillOnce(DuplicateArg<1, unsigned char>(&n)); +``` + +If you want to explicitly specify the value argument types, you can +provide additional template arguments: +``` + ActionName(v1, ..., v_n) +``` +where `u_i` is the desired type of `v_i`. + +`ACTION_TEMPLATE` and `ACTION`/`ACTION_P*` can be overloaded on the +number of value parameters, but not on the number of template +parameters. Without the restriction, the meaning of the following is +unclear: + +``` + OverloadedAction(x); +``` + +Are we using a single-template-parameter action where `bool` refers to +the type of `x`, or a two-template-parameter action where the compiler +is asked to infer the type of `x`? + +## Using the ACTION Object's Type ## + +If you are writing a function that returns an `ACTION` object, you'll +need to know its type. The type depends on the macro used to define +the action and the parameter types. The rule is relatively simple: +| **Given Definition** | **Expression** | **Has Type** | +|:---------------------|:---------------|:-------------| +| `ACTION(Foo)` | `Foo()` | `FooAction` | +| `ACTION_TEMPLATE(Foo, HAS_m_TEMPLATE_PARAMS(...), AND_0_VALUE_PARAMS())` | `Foo()` | `FooAction` | +| `ACTION_P(Bar, param)` | `Bar(int_value)` | `BarActionP` | +| `ACTION_TEMPLATE(Bar, HAS_m_TEMPLATE_PARAMS(...), AND_1_VALUE_PARAMS(p1))` | `Bar(int_value)` | `FooActionP` | +| `ACTION_P2(Baz, p1, p2)` | `Baz(bool_value, int_value)` | `BazActionP2` | +| `ACTION_TEMPLATE(Baz, HAS_m_TEMPLATE_PARAMS(...), AND_2_VALUE_PARAMS(p1, p2))` | `Baz(bool_value, int_value)` | `FooActionP2` | +| ... | ... | ... | + +Note that we have to pick different suffixes (`Action`, `ActionP`, +`ActionP2`, and etc) for actions with different numbers of value +parameters, or the action definitions cannot be overloaded on the +number of them. + +## Writing New Monomorphic Actions ## + +While the `ACTION*` macros are very convenient, sometimes they are +inappropriate. For example, despite the tricks shown in the previous +recipes, they don't let you directly specify the types of the mock +function arguments and the action parameters, which in general leads +to unoptimized compiler error messages that can baffle unfamiliar +users. They also don't allow overloading actions based on parameter +types without jumping through some hoops. + +An alternative to the `ACTION*` macros is to implement +`::testing::ActionInterface`, where `F` is the type of the mock +function in which the action will be used. For example: + +``` +template class ActionInterface { + public: + virtual ~ActionInterface(); + + // Performs the action. Result is the return type of function type + // F, and ArgumentTuple is the tuple of arguments of F. + // + // For example, if F is int(bool, const string&), then Result would + // be int, and ArgumentTuple would be tr1::tuple. + virtual Result Perform(const ArgumentTuple& args) = 0; +}; + +using ::testing::_; +using ::testing::Action; +using ::testing::ActionInterface; +using ::testing::MakeAction; + +typedef int IncrementMethod(int*); + +class IncrementArgumentAction : public ActionInterface { + public: + virtual int Perform(const tr1::tuple& args) { + int* p = tr1::get<0>(args); // Grabs the first argument. + return *p++; + } +}; + +Action IncrementArgument() { + return MakeAction(new IncrementArgumentAction); +} +... + + EXPECT_CALL(foo, Baz(_)) + .WillOnce(IncrementArgument()); + + int n = 5; + foo.Baz(&n); // Should return 5 and change n to 6. +``` + +## Writing New Polymorphic Actions ## + +The previous recipe showed you how to define your own action. This is +all good, except that you need to know the type of the function in +which the action will be used. Sometimes that can be a problem. For +example, if you want to use the action in functions with _different_ +types (e.g. like `Return()` and `SetArgumentPointee()`). + +If an action can be used in several types of mock functions, we say +it's _polymorphic_. The `MakePolymorphicAction()` function template +makes it easy to define such an action: + +``` +namespace testing { + +template +PolymorphicAction MakePolymorphicAction(const Impl& impl); + +} // namespace testing +``` + +As an example, let's define an action that returns the second argument +in the mock function's argument list. The first step is to define an +implementation class: + +``` +class ReturnSecondArgumentAction { + public: + template + Result Perform(const ArgumentTuple& args) const { + // To get the i-th (0-based) argument, use tr1::get(args). + return tr1::get<1>(args); + } +}; +``` + +This implementation class does _not_ need to inherit from any +particular class. What matters is that it must have a `Perform()` +method template. This method template takes the mock function's +arguments as a tuple in a **single** argument, and returns the result of +the action. It can be either `const` or not, but must be invokable +with exactly one template argument, which is the result type. In other +words, you must be able to call `Perform(args)` where `R` is the +mock function's return type and `args` is its arguments in a tuple. + +Next, we use `MakePolymorphicAction()` to turn an instance of the +implementation class into the polymorphic action we need. It will be +convenient to have a wrapper for this: + +``` +using ::testing::MakePolymorphicAction; +using ::testing::PolymorphicAction; + +PolymorphicAction ReturnSecondArgument() { + return MakePolymorphicAction(ReturnSecondArgumentAction()); +} +``` + +Now, you can use this polymorphic action the same way you use the +built-in ones: + +``` +using ::testing::_; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, int(bool flag, int n)); + MOCK_METHOD3(DoThat, string(int x, const char* str1, const char* str2)); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(ReturnSecondArgument()); + EXPECT_CALL(foo, DoThat(_, _, _)) + .WillOnce(ReturnSecondArgument()); + ... + foo.DoThis(true, 5); // Will return 5. + foo.DoThat(1, "Hi", "Bye"); // Will return "Hi". +``` + +## Teaching Google Mock How to Print Your Values ## + +When an uninteresting or unexpected call occurs, Google Mock prints +the argument values to help you debug. The `EXPECT_THAT` and +`ASSERT_THAT` assertions also print the value being validated when the +test fails. Google Mock does this using the user-extensible value +printer defined in ``. + +This printer knows how to print the built-in C++ types, native arrays, +STL containers, and any type that supports the `<<` operator. For +other types, it prints the raw bytes in the value and hope you the +user can figure it out. + +Did I say that the printer is `extensible`? That means you can teach +it to do a better job at printing your particular type than to dump +the bytes. To do that, you just need to define `<<` for your type: + +``` +#include + +namespace foo { + +class Foo { ... }; + +// It's important that the << operator is defined in the SAME +// namespace that defines Foo. C++'s look-up rules rely on that. +::std::ostream& operator<<(::std::ostream& os, const Foo& foo) { + return os << foo.DebugString(); // Whatever needed to print foo to os. +} + +} // namespace foo +``` + +Sometimes, this might not be an option. For example, your team may +consider it dangerous or bad style to have a `<<` operator for `Foo`, +or `Foo` may already have a `<<` operator that doesn't do what you +want (and you cannot change it). Don't despair though - Google Mock +gives you a second chance to get it right. Namely, you can define a +`PrintTo()` function like this: + +``` +#include + +namespace foo { + +class Foo { ... }; + +// It's important that PrintTo() is defined in the SAME +// namespace that defines Foo. C++'s look-up rules rely on that. +void PrintTo(const Foo& foo, ::std::ostream* os) { + *os << foo.DebugString(); // Whatever needed to print foo to os. +} + +} // namespace foo +``` + +What if you have both `<<` and `PrintTo()`? In this case, the latter +will override the former when Google Mock is concerned. This allows +you to customize how the value should appear in Google Mock's output +without affecting code that relies on the behavior of its `<<` +operator. + +**Note:** When printing a pointer of type `T*`, Google Mock calls +`PrintTo(T*, std::ostream* os)` instead of `operator<<(std::ostream&, T*)`. +Therefore the only way to affect how a pointer is printed by Google +Mock is to define `PrintTo()` for it. Also note that `T*` and `const T*` +are different types, so you may need to define `PrintTo()` for both. + +Why does Google Mock treat pointers specially? There are several reasons: + + * We cannot use `operator<<` to print a `signed char*` or `unsigned char*`, since it will print the pointer as a NUL-terminated C string, which likely will cause an access violation. + * We want `NULL` pointers to be printed as `"NULL"`, but `operator<<` prints it as `"0"`, `"nullptr"`, or something else, depending on the compiler. + * With some compilers, printing a `NULL` `char*` using `operator<<` will segfault. + * `operator<<` prints a function pointer as a `bool` (hence it always prints `"1"`), which is not very useful. \ No newline at end of file diff --git a/googlemock/docs/v1_5/Documentation.md b/googlemock/docs/v1_5/Documentation.md new file mode 100644 index 0000000..315b0a2 --- /dev/null +++ b/googlemock/docs/v1_5/Documentation.md @@ -0,0 +1,11 @@ +This page lists all documentation wiki pages for Google Mock **version 1.5.0** -- **if you use a different version of Google Mock, please read the documentation for that specific version instead.** + + * [ForDummies](V1_5_ForDummies.md) -- start here if you are new to Google Mock. + * [CheatSheet](V1_5_CheatSheet.md) -- a quick reference. + * [CookBook](V1_5_CookBook.md) -- recipes for doing various tasks using Google Mock. + * [FrequentlyAskedQuestions](V1_5_FrequentlyAskedQuestions.md) -- check here before asking a question on the mailing list. + +To contribute code to Google Mock, read: + + * DevGuide -- read this _before_ writing your first patch. + * [Pump Manual](http://code.google.com/p/googletest/wiki/PumpManual) -- how we generate some of Google Mock's source files. \ No newline at end of file diff --git a/googlemock/docs/v1_5/ForDummies.md b/googlemock/docs/v1_5/ForDummies.md new file mode 100644 index 0000000..fcc3b56 --- /dev/null +++ b/googlemock/docs/v1_5/ForDummies.md @@ -0,0 +1,439 @@ + + +(**Note:** If you get compiler errors that you don't understand, be sure to consult [Google Mock Doctor](V1_5_FrequentlyAskedQuestions#How_am_I_supposed_to_make_sense_of_these_horrible_template_error.md).) + +# What Is Google C++ Mocking Framework? # +When you write a prototype or test, often it's not feasible or wise to rely on real objects entirely. A **mock object** implements the same interface as a real object (so it can be used as one), but lets you specify at run time how it will be used and what it should do (which methods will be called? in which order? how many times? with what arguments? what will they return? etc). + +**Note:** It is easy to confuse the term _fake objects_ with mock objects. Fakes and mocks actually mean very different things in the Test-Driven Development (TDD) community: + + * **Fake** objects have working implementations, but usually take some shortcut (perhaps to make the operations less expensive), which makes them not suitable for production. An in-memory file system would be an example of a fake. + * **Mocks** are objects pre-programmed with _expectations_, which form a specification of the calls they are expected to receive. + +If all this seems too abstract for you, don't worry - the most important thing to remember is that a mock allows you to check the _interaction_ between itself and code that uses it. The difference between fakes and mocks will become much clearer once you start to use mocks. + +**Google C++ Mocking Framework** (or **Google Mock** for short) is a library (sometimes we also call it a "framework" to make it sound cool) for creating mock classes and using them. It does to C++ what [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/) do to Java. + +Using Google Mock involves three basic steps: + + 1. Use some simple macros to describe the interface you want to mock, and they will expand to the implementation of your mock class; + 1. Create some mock objects and specify its expectations and behavior using an intuitive syntax; + 1. Exercise code that uses the mock objects. Google Mock will catch any violation of the expectations as soon as it arises. + +# Why Google Mock? # +While mock objects help you remove unnecessary dependencies in tests and make them fast and reliable, using mocks manually in C++ is _hard_: + + * Someone has to implement the mocks. The job is usually tedious and error-prone. No wonder people go great distance to avoid it. + * The quality of those manually written mocks is a bit, uh, unpredictable. You may see some really polished ones, but you may also see some that were hacked up in a hurry and have all sorts of ad hoc restrictions. + * The knowledge you gained from using one mock doesn't transfer to the next. + +In contrast, Java and Python programmers have some fine mock frameworks, which automate the creation of mocks. As a result, mocking is a proven effective technique and widely adopted practice in those communities. Having the right tool absolutely makes the difference. + +Google Mock was built to help C++ programmers. It was inspired by [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/), but designed with C++'s specifics in mind. It is your friend if any of the following problems is bothering you: + + * You are stuck with a sub-optimal design and wish you had done more prototyping before it was too late, but prototyping in C++ is by no means "rapid". + * Your tests are slow as they depend on too many libraries or use expensive resources (e.g. a database). + * Your tests are brittle as some resources they use are unreliable (e.g. the network). + * You want to test how your code handles a failure (e.g. a file checksum error), but it's not easy to cause one. + * You need to make sure that your module interacts with other modules in the right way, but it's hard to observe the interaction; therefore you resort to observing the side effects at the end of the action, which is awkward at best. + * You want to "mock out" your dependencies, except that they don't have mock implementations yet; and, frankly, you aren't thrilled by some of those hand-written mocks. + +We encourage you to use Google Mock as: + + * a _design_ tool, for it lets you experiment with your interface design early and often. More iterations lead to better designs! + * a _testing_ tool to cut your tests' outbound dependencies and probe the interaction between your module and its collaborators. + +# Getting Started # +Using Google Mock is easy! Inside your C++ source file, just `#include` `` and ``, and you are ready to go. + +# A Case for Mock Turtles # +Let's look at an example. Suppose you are developing a graphics program that relies on a LOGO-like API for drawing. How would you test that it does the right thing? Well, you can run it and compare the screen with a golden screen snapshot, but let's admit it: tests like this are expensive to run and fragile (What if you just upgraded to a shiny new graphics card that has better anti-aliasing? Suddenly you have to update all your golden images.). It would be too painful if all your tests are like this. Fortunately, you learned about Dependency Injection and know the right thing to do: instead of having your application talk to the drawing API directly, wrap the API in an interface (say, `Turtle`) and code to that interface: + +``` +class Turtle { + ... + virtual ~Turtle() {} + virtual void PenUp() = 0; + virtual void PenDown() = 0; + virtual void Forward(int distance) = 0; + virtual void Turn(int degrees) = 0; + virtual void GoTo(int x, int y) = 0; + virtual int GetX() const = 0; + virtual int GetY() const = 0; +}; +``` + +(Note that the destructor of `Turtle` **must** be virtual, as is the case for **all** classes you intend to inherit from - otherwise the destructor of the derived class will not be called when you delete an object through a base pointer, and you'll get corrupted program states like memory leaks.) + +You can control whether the turtle's movement will leave a trace using `PenUp()` and `PenDown()`, and control its movement using `Forward()`, `Turn()`, and `GoTo()`. Finally, `GetX()` and `GetY()` tell you the current position of the turtle. + +Your program will normally use a real implementation of this interface. In tests, you can use a mock implementation instead. This allows you to easily check what drawing primitives your program is calling, with what arguments, and in which order. Tests written this way are much more robust (they won't break because your new machine does anti-aliasing differently), easier to read and maintain (the intent of a test is expressed in the code, not in some binary images), and run _much, much faster_. + +# Writing the Mock Class # +If you are lucky, the mocks you need to use have already been implemented by some nice people. If, however, you find yourself in the position to write a mock class, relax - Google Mock turns this task into a fun game! (Well, almost.) + +## How to Define It ## +Using the `Turtle` interface as example, here are the simple steps you need to follow: + + 1. Derive a class `MockTurtle` from `Turtle`. + 1. Take a virtual function of `Turtle`. Count how many arguments it has. + 1. In the `public:` section of the child class, write `MOCK_METHODn();` (or `MOCK_CONST_METHODn();` if you are mocking a `const` method), where `n` is the number of the arguments; if you counted wrong, shame on you, and a compiler error will tell you so. + 1. Now comes the fun part: you take the function signature, cut-and-paste the _function name_ as the _first_ argument to the macro, and leave what's left as the _second_ argument (in case you're curious, this is the _type of the function_). + 1. Repeat until all virtual functions you want to mock are done. + +After the process, you should have something like: + +``` +#include // Brings in Google Mock. +class MockTurtle : public Turtle { + public: + ... + MOCK_METHOD0(PenUp, void()); + MOCK_METHOD0(PenDown, void()); + MOCK_METHOD1(Forward, void(int distance)); + MOCK_METHOD1(Turn, void(int degrees)); + MOCK_METHOD2(GoTo, void(int x, int y)); + MOCK_CONST_METHOD0(GetX, int()); + MOCK_CONST_METHOD0(GetY, int()); +}; +``` + +You don't need to define these mock methods somewhere else - the `MOCK_METHOD*` macros will generate the definitions for you. It's that simple! Once you get the hang of it, you can pump out mock classes faster than your source-control system can handle your check-ins. + +**Tip:** If even this is too much work for you, you'll find the +`gmock_gen.py` tool in Google Mock's `scripts/generator/` directory (courtesy of the [cppclean](http://code.google.com/p/cppclean/) project) useful. This command-line +tool requires that you have Python 2.4 installed. You give it a C++ file and the name of an abstract class defined in it, +and it will print the definition of the mock class for you. Due to the +complexity of the C++ language, this script may not always work, but +it can be quite handy when it does. For more details, read the [user documentation](http://code.google.com/p/googlemock/source/browse/trunk/scripts/generator/README). + +## Where to Put It ## +When you define a mock class, you need to decide where to put its definition. Some people put it in a `*_test.cc`. This is fine when the interface being mocked (say, `Foo`) is owned by the same person or team. Otherwise, when the owner of `Foo` changes it, your test could break. (You can't really expect `Foo`'s maintainer to fix every test that uses `Foo`, can you?) + +So, the rule of thumb is: if you need to mock `Foo` and it's owned by others, define the mock class in `Foo`'s package (better, in a `testing` sub-package such that you can clearly separate production code and testing utilities), and put it in a `mock_foo.h`. Then everyone can reference `mock_foo.h` from their tests. If `Foo` ever changes, there is only one copy of `MockFoo` to change, and only tests that depend on the changed methods need to be fixed. + +Another way to do it: you can introduce a thin layer `FooAdaptor` on top of `Foo` and code to this new interface. Since you own `FooAdaptor`, you can absorb changes in `Foo` much more easily. While this is more work initially, carefully choosing the adaptor interface can make your code easier to write and more readable (a net win in the long run), as you can choose `FooAdaptor` to fit your specific domain much better than `Foo` does. + +# Using Mocks in Tests # +Once you have a mock class, using it is easy. The typical work flow is: + + 1. Import the Google Mock names from the `testing` namespace such that you can use them unqualified (You only have to do it once per file. Remember that namespaces are a good idea and good for your health.). + 1. Create some mock objects. + 1. Specify your expectations on them (How many times will a method be called? With what arguments? What should it do? etc.). + 1. Exercise some code that uses the mocks; optionally, check the result using Google Test assertions. If a mock method is called more than expected or with wrong arguments, you'll get an error immediately. + 1. When a mock is destructed, Google Mock will automatically check whether all expectations on it have been satisfied. + +Here's an example: + +``` +#include "path/to/mock-turtle.h" +#include +#include +using ::testing::AtLeast; // #1 + +TEST(PainterTest, CanDrawSomething) { + MockTurtle turtle; // #2 + EXPECT_CALL(turtle, PenDown()) // #3 + .Times(AtLeast(1)); + + Painter painter(&turtle); // #4 + + EXPECT_TRUE(painter.DrawCircle(0, 0, 10)); +} // #5 + +int main(int argc, char** argv) { + // The following line must be executed to initialize Google Mock + // (and Google Test) before running the tests. + ::testing::InitGoogleMock(&argc, argv); + return RUN_ALL_TESTS(); +} +``` + +As you might have guessed, this test checks that `PenDown()` is called at least once. If the `painter` object didn't call this method, your test will fail with a message like this: + +``` +path/to/my_test.cc:119: Failure +Actual function call count doesn't match this expectation: +Actually: never called; +Expected: called at least once. +``` + +**Tip 1:** If you run the test from an Emacs buffer, you can hit `` on the line number displayed in the error message to jump right to the failed expectation. + +**Tip 2:** If your mock objects are never deleted, the final verification won't happen. Therefore it's a good idea to use a heap leak checker in your tests when you allocate mocks on the heap. + +**Important note:** Google Mock requires expectations to be set **before** the mock functions are called, otherwise the behavior is **undefined**. In particular, you mustn't interleave `EXPECT_CALL()`s and calls to the mock functions. + +This means `EXPECT_CALL()` should be read as expecting that a call will occur _in the future_, not that a call has occurred. Why does Google Mock work like that? Well, specifying the expectation beforehand allows Google Mock to report a violation as soon as it arises, when the context (stack trace, etc) is still available. This makes debugging much easier. + +Admittedly, this test is contrived and doesn't do much. You can easily achieve the same effect without using Google Mock. However, as we shall reveal soon, Google Mock allows you to do _much more_ with the mocks. + +## Using Google Mock with Any Testing Framework ## +If you want to use something other than Google Test (e.g. [CppUnit](http://apps.sourceforge.net/mediawiki/cppunit/index.php?title=Main_Page) or +[CxxTest](http://cxxtest.tigris.org/)) as your testing framework, just change the `main()` function in the previous section to: +``` +int main(int argc, char** argv) { + // The following line causes Google Mock to throw an exception on failure, + // which will be interpreted by your testing framework as a test failure. + ::testing::GTEST_FLAG(throw_on_failure) = true; + ::testing::InitGoogleMock(&argc, argv); + ... whatever your testing framework requires ... +} +``` + +This approach has a catch: it makes Google Mock throw an exception +from a mock object's destructor sometimes. With some compilers, this +sometimes causes the test program to crash. You'll still be able to +notice that the test has failed, but it's not a graceful failure. + +A better solution is to use Google Test's +[event listener API](http://code.google.com/p/googletest/wiki/GoogleTestAdvancedGuide#Extending_Google_Test_by_Handling_Test_Events) +to report a test failure to your testing framework properly. You'll need to +implement the `OnTestPartResult()` method of the event listener interface, but it +should be straightforward. + +If this turns out to be too much work, we suggest that you stick with +Google Test, which works with Google Mock seamlessly (in fact, it is +technically part of Google Mock.). If there is a reason that you +cannot use Google Test, please let us know. + +# Setting Expectations # +The key to using a mock object successfully is to set the _right expectations_ on it. If you set the expectations too strict, your test will fail as the result of unrelated changes. If you set them too loose, bugs can slip through. You want to do it just right such that your test can catch exactly the kind of bugs you intend it to catch. Google Mock provides the necessary means for you to do it "just right." + +## General Syntax ## +In Google Mock we use the `EXPECT_CALL()` macro to set an expectation on a mock method. The general syntax is: + +``` +EXPECT_CALL(mock_object, method(matchers)) + .Times(cardinality) + .WillOnce(action) + .WillRepeatedly(action); +``` + +The macro has two arguments: first the mock object, and then the method and its arguments. Note that the two are separated by a comma (`,`), not a period (`.`). (Why using a comma? The answer is that it was necessary for technical reasons.) + +The macro can be followed by some optional _clauses_ that provide more information about the expectation. We'll discuss how each clause works in the coming sections. + +This syntax is designed to make an expectation read like English. For example, you can probably guess that + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .Times(5) + .WillOnce(Return(100)) + .WillOnce(Return(150)) + .WillRepeatedly(Return(200)); +``` + +says that the `turtle` object's `GetX()` method will be called five times, it will return 100 the first time, 150 the second time, and then 200 every time. Some people like to call this style of syntax a Domain-Specific Language (DSL). + +**Note:** Why do we use a macro to do this? It serves two purposes: first it makes expectations easily identifiable (either by `grep` or by a human reader), and second it allows Google Mock to include the source file location of a failed expectation in messages, making debugging easier. + +## Matchers: What Arguments Do We Expect? ## +When a mock function takes arguments, we must specify what arguments we are expecting; for example: + +``` +// Expects the turtle to move forward by 100 units. +EXPECT_CALL(turtle, Forward(100)); +``` + +Sometimes you may not want to be too specific (Remember that talk about tests being too rigid? Over specification leads to brittle tests and obscures the intent of tests. Therefore we encourage you to specify only what's necessary - no more, no less.). If you care to check that `Forward()` will be called but aren't interested in its actual argument, write `_` as the argument, which means "anything goes": + +``` +using ::testing::_; +... +// Expects the turtle to move forward. +EXPECT_CALL(turtle, Forward(_)); +``` + +`_` is an instance of what we call **matchers**. A matcher is like a predicate and can test whether an argument is what we'd expect. You can use a matcher inside `EXPECT_CALL()` wherever a function argument is expected. + +A list of built-in matchers can be found in the [CheatSheet](V1_5_CheatSheet.md). For example, here's the `Ge` (greater than or equal) matcher: + +``` +using ::testing::Ge;... +EXPECT_CALL(turtle, Forward(Ge(100))); +``` + +This checks that the turtle will be told to go forward by at least 100 units. + +## Cardinalities: How Many Times Will It Be Called? ## +The first clause we can specify following an `EXPECT_CALL()` is `Times()`. We call its argument a **cardinality** as it tells _how many times_ the call should occur. It allows us to repeat an expectation many times without actually writing it as many times. More importantly, a cardinality can be "fuzzy", just like a matcher can be. This allows a user to express the intent of a test exactly. + +An interesting special case is when we say `Times(0)`. You may have guessed - it means that the function shouldn't be called with the given arguments at all, and Google Mock will report a Google Test failure whenever the function is (wrongfully) called. + +We've seen `AtLeast(n)` as an example of fuzzy cardinalities earlier. For the list of built-in cardinalities you can use, see the [CheatSheet](V1_5_CheatSheet.md). + +The `Times()` clause can be omitted. **If you omit `Times()`, Google Mock will infer the cardinality for you.** The rules are easy to remember: + + * If **neither** `WillOnce()` **nor** `WillRepeatedly()` is in the `EXPECT_CALL()`, the inferred cardinality is `Times(1)`. + * If there are `n WillOnce()`'s but **no** `WillRepeatedly()`, where `n` >= 1, the cardinality is `Times(n)`. + * If there are `n WillOnce()`'s and **one** `WillRepeatedly()`, where `n` >= 0, the cardinality is `Times(AtLeast(n))`. + +**Quick quiz:** what do you think will happen if a function is expected to be called twice but actually called four times? + +## Actions: What Should It Do? ## +Remember that a mock object doesn't really have a working implementation? We as users have to tell it what to do when a method is invoked. This is easy in Google Mock. + +First, if the return type of a mock function is a built-in type or a pointer, the function has a **default action** (a `void` function will just return, a `bool` function will return `false`, and other functions will return 0). If you don't say anything, this behavior will be used. + +Second, if a mock function doesn't have a default action, or the default action doesn't suit you, you can specify the action to be taken each time the expectation matches using a series of `WillOnce()` clauses followed by an optional `WillRepeatedly()`. For example, + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillOnce(Return(300)); +``` + +This says that `turtle.GetX()` will be called _exactly three times_ (Google Mock inferred this from how many `WillOnce()` clauses we've written, since we didn't explicitly write `Times()`), and will return 100, 200, and 300 respectively. + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillRepeatedly(Return(300)); +``` + +says that `turtle.GetY()` will be called _at least twice_ (Google Mock knows this as we've written two `WillOnce()` clauses and a `WillRepeatedly()` while having no explicit `Times()`), will return 100 the first time, 200 the second time, and 300 from the third time on. + +Of course, if you explicitly write a `Times()`, Google Mock will not try to infer the cardinality itself. What if the number you specified is larger than there are `WillOnce()` clauses? Well, after all `WillOnce()`s are used up, Google Mock will do the _default_ action for the function every time (unless, of course, you have a `WillRepeatedly()`.). + +What can we do inside `WillOnce()` besides `Return()`? You can return a reference using `ReturnRef(variable)`, or invoke a pre-defined function, among [others](V1_5_CheatSheet#Actions.md). + +**Important note:** The `EXPECT_CALL()` statement evaluates the action clause only once, even though the action may be performed many times. Therefore you must be careful about side effects. The following may not do what you want: + +``` +int n = 100; +EXPECT_CALL(turtle, GetX()) +.Times(4) +.WillOnce(Return(n++)); +``` + +Instead of returning 100, 101, 102, ..., consecutively, this mock function will always return 100 as `n++` is only evaluated once. Similarly, `Return(new Foo)` will create a new `Foo` object when the `EXPECT_CALL()` is executed, and will return the same pointer every time. If you want the side effect to happen every time, you need to define a custom action, which we'll teach in the [CookBook](V1_5_CookBook.md). + +Time for another quiz! What do you think the following means? + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) +.Times(4) +.WillOnce(Return(100)); +``` + +Obviously `turtle.GetY()` is expected to be called four times. But if you think it will return 100 every time, think twice! Remember that one `WillOnce()` clause will be consumed each time the function is invoked and the default action will be taken afterwards. So the right answer is that `turtle.GetY()` will return 100 the first time, but **return 0 from the second time on**, as returning 0 is the default action for `int` functions. + +## Using Multiple Expectations ## +So far we've only shown examples where you have a single expectation. More realistically, you're going to specify expectations on multiple mock methods, which may be from multiple mock objects. + +By default, when a mock method is invoked, Google Mock will search the expectations in the **reverse order** they are defined, and stop when an active expectation that matches the arguments is found (you can think of it as "newer rules override older ones."). If the matching expectation cannot take any more calls, you will get an upper-bound-violated failure. Here's an example: + +``` +using ::testing::_;... +EXPECT_CALL(turtle, Forward(_)); // #1 +EXPECT_CALL(turtle, Forward(10)) // #2 + .Times(2); +``` + +If `Forward(10)` is called three times in a row, the third time it will be an error, as the last matching expectation (#2) has been saturated. If, however, the third `Forward(10)` call is replaced by `Forward(20)`, then it would be OK, as now #1 will be the matching expectation. + +**Side note:** Why does Google Mock search for a match in the _reverse_ order of the expectations? The reason is that this allows a user to set up the default expectations in a mock object's constructor or the test fixture's set-up phase and then customize the mock by writing more specific expectations in the test body. So, if you have two expectations on the same method, you want to put the one with more specific matchers **after** the other, or the more specific rule would be shadowed by the more general one that comes after it. + +## Ordered vs Unordered Calls ## +By default, an expectation can match a call even though an earlier expectation hasn't been satisfied. In other words, the calls don't have to occur in the order the expectations are specified. + +Sometimes, you may want all the expected calls to occur in a strict order. To say this in Google Mock is easy: + +``` +using ::testing::InSequence;... +TEST(FooTest, DrawsLineSegment) { + ... + { + InSequence dummy; + + EXPECT_CALL(turtle, PenDown()); + EXPECT_CALL(turtle, Forward(100)); + EXPECT_CALL(turtle, PenUp()); + } + Foo(); +} +``` + +By creating an object of type `InSequence`, all expectations in its scope are put into a _sequence_ and have to occur _sequentially_. Since we are just relying on the constructor and destructor of this object to do the actual work, its name is really irrelevant. + +In this example, we test that `Foo()` calls the three expected functions in the order as written. If a call is made out-of-order, it will be an error. + +(What if you care about the relative order of some of the calls, but not all of them? Can you specify an arbitrary partial order? The answer is ... yes! If you are impatient, the details can be found in the [CookBook](V1_5_CookBook.md).) + +## All Expectations Are Sticky (Unless Said Otherwise) ## +Now let's do a quick quiz to see how well you can use this mock stuff already. How would you test that the turtle is asked to go to the origin _exactly twice_ (you want to ignore any other instructions it receives)? + +After you've come up with your answer, take a look at ours and compare notes (solve it yourself first - don't cheat!): + +``` +using ::testing::_;... +EXPECT_CALL(turtle, GoTo(_, _)) // #1 + .Times(AnyNumber()); +EXPECT_CALL(turtle, GoTo(0, 0)) // #2 + .Times(2); +``` + +Suppose `turtle.GoTo(0, 0)` is called three times. In the third time, Google Mock will see that the arguments match expectation #2 (remember that we always pick the last matching expectation). Now, since we said that there should be only two such calls, Google Mock will report an error immediately. This is basically what we've told you in the "Using Multiple Expectations" section above. + +This example shows that **expectations in Google Mock are "sticky" by default**, in the sense that they remain active even after we have reached their invocation upper bounds. This is an important rule to remember, as it affects the meaning of the spec, and is **different** to how it's done in many other mocking frameworks (Why'd we do that? Because we think our rule makes the common cases easier to express and understand.). + +Simple? Let's see if you've really understood it: what does the following code say? + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)); +} +``` + +If you think it says that `turtle.GetX()` will be called `n` times and will return 10, 20, 30, ..., consecutively, think twice! The problem is that, as we said, expectations are sticky. So, the second time `turtle.GetX()` is called, the last (latest) `EXPECT_CALL()` statement will match, and will immediately lead to an "upper bound exceeded" error - this piece of code is not very useful! + +One correct way of saying that `turtle.GetX()` will return 10, 20, 30, ..., is to explicitly say that the expectations are _not_ sticky. In other words, they should _retire_ as soon as they are saturated: + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); +} +``` + +And, there's a better way to do it: in this case, we expect the calls to occur in a specific order, and we line up the actions to match the order. Since the order is important here, we should make it explicit using a sequence: + +``` +using ::testing::InSequence; +using ::testing::Return; +... +{ + InSequence s; + + for (int i = 1; i <= n; i++) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); + } +} +``` + +By the way, the other situation where an expectation may _not_ be sticky is when it's in a sequence - as soon as another expectation that comes after it in the sequence has been used, it automatically retires (and will never be used to match any call). + +## Uninteresting Calls ## +A mock object may have many methods, and not all of them are that interesting. For example, in some tests we may not care about how many times `GetX()` and `GetY()` get called. + +In Google Mock, if you are not interested in a method, just don't say anything about it. If a call to this method occurs, you'll see a warning in the test output, but it won't be a failure. + +# What Now? # +Congratulations! You've learned enough about Google Mock to start using it. Now, you might want to join the [googlemock](http://groups.google.com/group/googlemock) discussion group and actually write some tests using Google Mock - it will be fun. Hey, it may even be addictive - you've been warned. + +Then, if you feel like increasing your mock quotient, you should move on to the [CookBook](V1_5_CookBook.md). You can learn many advanced features of Google Mock there -- and advance your level of enjoyment and testing bliss. \ No newline at end of file diff --git a/googlemock/docs/v1_5/FrequentlyAskedQuestions.md b/googlemock/docs/v1_5/FrequentlyAskedQuestions.md new file mode 100644 index 0000000..7593243 --- /dev/null +++ b/googlemock/docs/v1_5/FrequentlyAskedQuestions.md @@ -0,0 +1,624 @@ + + +Please send your questions to the +[googlemock](http://groups.google.com/group/googlemock) discussion +group. If you need help with compiler errors, make sure you have +tried [Google Mock Doctor](#How_am_I_supposed_to_make_sense_of_these_horrible_template_error.md) first. + +## I wrote some matchers. After I upgraded to a new version of Google Mock, they no longer compile. What's going on? ## + +After version 1.4.0 of Google Mock was released, we had an idea on how +to make it easier to write matchers that can generate informative +messages efficiently. We experimented with this idea and liked what +we saw. Therefore we decided to implement it. + +Unfortunately, this means that if you have defined your own matchers +by implementing `MatcherInterface` or using `MakePolymorphicMatcher()`, +your definitions will no longer compile. Matchers defined using the +`MATCHER*` family of macros are not affected. + +Sorry for the hassle if your matchers are affected. We believe it's +in everyone's long-term interest to make this change sooner than +later. Fortunately, it's usually not hard to migrate an existing +matcher to the new API. Here's what you need to do: + +If you wrote your matcher like this: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` + +you'll need to change it to: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` +(i.e. rename `Matches()` to `MatchAndExplain()` and give it a second +argument of type `MatchResultListener*`.) + +If you were also using `ExplainMatchResultTo()` to improve the matcher +message: +``` +// Old matcher definition that doesn't work with the lastest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + + virtual void ExplainMatchResultTo(MyType value, + ::std::ostream* os) const { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Foo property is " << value.GetFoo(); + } + ... +}; +``` + +you should move the logic of `ExplainMatchResultTo()` into +`MatchAndExplain()`, using the `MatchResultListener` argument where +the `::std::ostream` was used: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Foo property is " << value.GetFoo(); + return value.GetFoo() > 5; + } + ... +}; +``` + +If your matcher is defined using `MakePolymorphicMatcher()`: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you should rename the `Matches()` method to `MatchAndExplain()` and +add a `MatchResultListener*` argument (the same as what you need to do +for matchers defined by implementing `MatcherInterface`): +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +If your polymorphic matcher uses `ExplainMatchResultTo()` for better +failure messages: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +void ExplainMatchResultTo(const MyGreatMatcher& matcher, + MyType value, + ::std::ostream* os) { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Bar property is " << value.GetBar(); +} +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you'll need to move the logic inside `ExplainMatchResultTo()` to +`MatchAndExplain()`: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Bar property is " << value.GetBar(); + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +For more information, you can read these +[two](V1_5_CookBook#Writing_New_Monomorphic_Matchers.md) +[recipes](V1_5_CookBook#Writing_New_Polymorphic_Matchers.md) +from the cookbook. As always, you +are welcome to post questions on `googlemock@googlegroups.com` if you +need any help. + +## When using Google Mock, do I have to use Google Test as the testing framework? I have my favorite testing framework and don't want to switch. ## + +Google Mock works out of the box with Google Test. However, it's easy +to configure it to work with any testing framework of your choice. +[Here](V1_5_ForDummies#Using_Google_Mock_with_Any_Testing_Framework.md) is how. + +## How am I supposed to make sense of these horrible template errors? ## + +If you are confused by the compiler errors gcc threw at you, +try consulting the _Google Mock Doctor_ tool first. What it does is to +scan stdin for gcc error messages, and spit out diagnoses on the +problems (we call them diseases) your code has. + +To "install", run command: +``` +alias gmd='/scripts/gmock_doctor.py' +``` + +To use it, do: +``` + 2>&1 | gmd +``` + +For example: +``` +make my_test 2>&1 | gmd +``` + +Or you can run `gmd` and copy-n-paste gcc's error messages to it. + +## Can I mock a variadic function? ## + +You cannot mock a variadic function (i.e. a function taking ellipsis +(`...`) arguments) directly in Google Mock. + +The problem is that in general, there is _no way_ for a mock object to +know how many arguments are passed to the variadic method, and what +the arguments' types are. Only the _author of the base class_ knows +the protocol, and we cannot look into his head. + +Therefore, to mock such a function, the _user_ must teach the mock +object how to figure out the number of arguments and their types. One +way to do it is to provide overloaded versions of the function. + +Ellipsis arguments are inherited from C and not really a C++ feature. +They are unsafe to use and don't work with arguments that have +constructors or destructors. Therefore we recommend to avoid them in +C++ as much as possible. + +## MSVC gives me warning C4301 or C4373 when I define a mock method with a const parameter. Why? ## + +If you compile this using Microsoft Visual C++ 2005 SP1: +``` +class Foo { + ... + virtual void Bar(const int i) = 0; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Bar, void(const int i)); +}; +``` +You may get the following warning: +``` +warning C4301: 'MockFoo::Bar': overriding virtual function only differs from 'Foo::Bar' by const/volatile qualifier +``` + +This is a MSVC bug. The same code compiles fine with gcc ,for +example. If you use Visual C++ 2008 SP1, you would get the warning: +``` +warning C4373: 'MockFoo::Bar': virtual function overrides 'Foo::Bar', previous versions of the compiler did not override when parameters only differed by const/volatile qualifiers +``` + +In C++, if you _declare_ a function with a `const` parameter, the +`const` modifier is _ignored_. Therefore, the `Foo` base class above +is equivalent to: +``` +class Foo { + ... + virtual void Bar(int i) = 0; // int or const int? Makes no difference. +}; +``` + +In fact, you can _declare_ Bar() with an `int` parameter, and _define_ +it with a `const int` parameter. The compiler will still match them +up. + +Since making a parameter `const` is meaningless in the method +_declaration_, we recommend to remove it in both `Foo` and `MockFoo`. +That should workaround the VC bug. + +Note that we are talking about the _top-level_ `const` modifier here. +If the function parameter is passed by pointer or reference, declaring +the _pointee_ or _referee_ as `const` is still meaningful. For +example, the following two declarations are _not_ equivalent: +``` +void Bar(int* p); // Neither p nor *p is const. +void Bar(const int* p); // p is not const, but *p is. +``` + +## I have a huge mock class, and Microsoft Visual C++ runs out of memory when compiling it. What can I do? ## + +We've noticed that when the `/clr` compiler flag is used, Visual C++ +uses 5~6 times as much memory when compiling a mock class. We suggest +to avoid `/clr` when compiling native C++ mocks. + +## I can't figure out why Google Mock thinks my expectations are not satisfied. What should I do? ## + +You might want to run your test with +`--gmock_verbose=info`. This flag lets Google Mock print a trace +of every mock function call it receives. By studying the trace, +you'll gain insights on why the expectations you set are not met. + +## How can I assert that a function is NEVER called? ## + +``` +EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +## I have a failed test where Google Mock tells me TWICE that a particular expectation is not satisfied. Isn't this redundant? ## + +When Google Mock detects a failure, it prints relevant information +(the mock function arguments, the state of relevant expectations, and +etc) to help the user debug. If another failure is detected, Google +Mock will do the same, including printing the state of relevant +expectations. + +Sometimes an expectation's state didn't change between two failures, +and you'll see the same description of the state twice. They are +however _not_ redundant, as they refer to _different points in time_. +The fact they are the same _is_ interesting information. + +## I get a heap check failure when using a mock object, but using a real object is fine. What can be wrong? ## + +Does the class (hopefully a pure interface) you are mocking have a +virtual destructor? + +Whenever you derive from a base class, make sure its destructor is +virtual. Otherwise Bad Things will happen. Consider the following +code: + +``` +class Base { + public: + // Not virtual, but should be. + ~Base() { ... } + ... +}; + +class Derived : public Base { + public: + ... + private: + std::string value_; +}; + +... + Base* p = new Derived; + ... + delete p; // Surprise! ~Base() will be called, but ~Derived() will not + // - value_ is leaked. +``` + +By changing `~Base()` to virtual, `~Derived()` will be correctly +called when `delete p` is executed, and the heap checker +will be happy. + +## The "newer expectations override older ones" rule makes writing expectations awkward. Why does Google Mock do that? ## + +When people complain about this, often they are referring to code like: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. However, I have to write the expectations in the +// reverse order. This sucks big time!!! +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); +``` + +The problem is that they didn't pick the **best** way to express the test's +intent. + +By default, expectations don't have to be matched in _any_ particular +order. If you want them to match in a certain order, you need to be +explicit. This is Google Mock's (and jMock's) fundamental philosophy: it's +easy to accidentally over-specify your tests, and we want to make it +harder to do so. + +There are two better ways to write the test spec. You could either +put the expectations in sequence: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. Using a sequence, we can write the expectations +// in their natural order. +{ + InSequence s; + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +} +``` + +or you can put the sequence of actions in the same expectation: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +``` + +Back to the original questions: why does Google Mock search the +expectations (and `ON_CALL`s) from back to front? Because this +allows a user to set up a mock's behavior for the common case early +(e.g. in the mock's constructor or the test fixture's set-up phase) +and customize it with more specific rules later. If Google Mock +searches from front to back, this very useful pattern won't be +possible. + +## Google Mock prints a warning when a function without EXPECT\_CALL is called, even if I have set its behavior using ON\_CALL. Would it be reasonable not to show the warning in this case? ## + +When choosing between being neat and being safe, we lean toward the +latter. So the answer is that we think it's better to show the +warning. + +Often people write `ON_CALL`s in the mock object's +constructor or `SetUp()`, as the default behavior rarely changes from +test to test. Then in the test body they set the expectations, which +are often different for each test. Having an `ON_CALL` in the set-up +part of a test doesn't mean that the calls are expected. If there's +no `EXPECT_CALL` and the method is called, it's possibly an error. If +we quietly let the call go through without notifying the user, bugs +may creep in unnoticed. + +If, however, you are sure that the calls are OK, you can write + +``` +EXPECT_CALL(foo, Bar(_)) + .WillRepeatedly(...); +``` + +instead of + +``` +ON_CALL(foo, Bar(_)) + .WillByDefault(...); +``` + +This tells Google Mock that you do expect the calls and no warning should be +printed. + +Also, you can control the verbosity using the `--gmock_verbose` flag. +If you find the output too noisy when debugging, just choose a less +verbose level. + +## How can I delete the mock function's argument in an action? ## + +If you find yourself needing to perform some action that's not +supported by Google Mock directly, remember that you can define your own +actions using +[MakeAction()](V1_5_CookBook#Writing_New_Actions.md) or +[MakePolymorphicAction()](V1_5_CookBook#Writing_New_Polymorphic_Actions.md), +or you can write a stub function and invoke it using +[Invoke()](V1_5_CookBook#Using_Functions_Methods_Functors.md). + +## MOCK\_METHODn()'s second argument looks funny. Why don't you use the MOCK\_METHODn(Method, return\_type, arg\_1, ..., arg\_n) syntax? ## + +What?! I think it's beautiful. :-) + +While which syntax looks more natural is a subjective matter to some +extent, Google Mock's syntax was chosen for several practical advantages it +has. + +Try to mock a function that takes a map as an argument: +``` +virtual int GetSize(const map& m); +``` + +Using the proposed syntax, it would be: +``` +MOCK_METHOD1(GetSize, int, const map& m); +``` + +Guess what? You'll get a compiler error as the compiler thinks that +`const map& m` are **two**, not one, arguments. To work +around this you can use `typedef` to give the map type a name, but +that gets in the way of your work. Google Mock's syntax avoids this +problem as the function's argument types are protected inside a pair +of parentheses: +``` +// This compiles fine. +MOCK_METHOD1(GetSize, int(const map& m)); +``` + +You still need a `typedef` if the return type contains an unprotected +comma, but that's much rarer. + +Other advantages include: + 1. `MOCK_METHOD1(Foo, int, bool)` can leave a reader wonder whether the method returns `int` or `bool`, while there won't be such confusion using Google Mock's syntax. + 1. The way Google Mock describes a function type is nothing new, although many people may not be familiar with it. The same syntax was used in C, and the `function` library in `tr1` uses this syntax extensively. Since `tr1` will become a part of the new version of STL, we feel very comfortable to be consistent with it. + 1. The function type syntax is also used in other parts of Google Mock's API (e.g. the action interface) in order to make the implementation tractable. A user needs to learn it anyway in order to utilize Google Mock's more advanced features. We'd as well stick to the same syntax in `MOCK_METHOD*`! + +## My code calls a static/global function. Can I mock it? ## + +You can, but you need to make some changes. + +In general, if you find yourself needing to mock a static function, +it's a sign that your modules are too tightly coupled (and less +flexible, less reusable, less testable, etc). You are probably better +off defining a small interface and call the function through that +interface, which then can be easily mocked. It's a bit of work +initially, but usually pays for itself quickly. + +This Google Testing Blog +[post](http://googletesting.blogspot.com/2008/06/defeat-static-cling.html) +says it excellently. Check it out. + +## My mock object needs to do complex stuff. It's a lot of pain to specify the actions. Google Mock sucks! ## + +I know it's not a question, but you get an answer for free any way. :-) + +With Google Mock, you can create mocks in C++ easily. And people might be +tempted to use them everywhere. Sometimes they work great, and +sometimes you may find them, well, a pain to use. So, what's wrong in +the latter case? + +When you write a test without using mocks, you exercise the code and +assert that it returns the correct value or that the system is in an +expected state. This is sometimes called "state-based testing". + +Mocks are great for what some call "interaction-based" testing: +instead of checking the system state at the very end, mock objects +verify that they are invoked the right way and report an error as soon +as it arises, giving you a handle on the precise context in which the +error was triggered. This is often more effective and economical to +do than state-based testing. + +If you are doing state-based testing and using a test double just to +simulate the real object, you are probably better off using a fake. +Using a mock in this case causes pain, as it's not a strong point for +mocks to perform complex actions. If you experience this and think +that mocks suck, you are just not using the right tool for your +problem. Or, you might be trying to solve the wrong problem. :-) + +## I got a warning "Uninteresting function call encountered - default action taken.." Should I panic? ## + +By all means, NO! It's just an FYI. + +What it means is that you have a mock function, you haven't set any +expectations on it (by Google Mock's rule this means that you are not +interested in calls to this function and therefore it can be called +any number of times), and it is called. That's OK - you didn't say +it's not OK to call the function! + +What if you actually meant to disallow this function to be called, but +forgot to write `EXPECT_CALL(foo, Bar()).Times(0)`? While +one can argue that it's the user's fault, Google Mock tries to be nice and +prints you a note. + +So, when you see the message and believe that there shouldn't be any +uninteresting calls, you should investigate what's going on. To make +your life easier, Google Mock prints the function name and arguments +when an uninteresting call is encountered. + +## I want to define a custom action. Should I use Invoke() or implement the action interface? ## + +Either way is fine - you want to choose the one that's more convenient +for your circumstance. + +Usually, if your action is for a particular function type, defining it +using `Invoke()` should be easier; if your action can be used in +functions of different types (e.g. if you are defining +`Return(value)`), `MakePolymorphicAction()` is +easiest. Sometimes you want precise control on what types of +functions the action can be used in, and implementing +`ActionInterface` is the way to go here. See the implementation of +`Return()` in `include/gmock/gmock-actions.h` for an example. + +## I'm using the set-argument-pointee action, and the compiler complains about "conflicting return type specified". What does it mean? ## + +You got this error as Google Mock has no idea what value it should return +when the mock method is called. `SetArgumentPointee()` says what the +side effect is, but doesn't say what the return value should be. You +need `DoAll()` to chain a `SetArgumentPointee()` with a `Return()`. + +See this [recipe](V1_5_CookBook#Mocking_Side_Effects.md) for more details and an example. + + +## My question is not in your FAQ! ## + +If you cannot find the answer to your question in this FAQ, there are +some other resources you can use: + + 1. read other [wiki pages](http://code.google.com/p/googlemock/w/list), + 1. search the mailing list [archive](http://groups.google.com/group/googlemock/topics), + 1. ask it on [googlemock@googlegroups.com](mailto:googlemock@googlegroups.com) and someone will answer it (to prevent spam, we require you to join the [discussion group](http://groups.google.com/group/googlemock) before you can post.). + +Please note that creating an issue in the +[issue tracker](http://code.google.com/p/googlemock/issues/list) is _not_ +a good way to get your answer, as it is monitored infrequently by a +very small number of people. + +When asking a question, it's helpful to provide as much of the +following information as possible (people cannot help you if there's +not enough information in your question): + + * the version (or the revision number if you check out from SVN directly) of Google Mock you use (Google Mock is under active development, so it's possible that your problem has been solved in a later version), + * your operating system, + * the name and version of your compiler, + * the complete command line flags you give to your compiler, + * the complete compiler error messages (if the question is about compilation), + * the _actual_ code (ideally, a minimal but complete program) that has the problem you encounter. \ No newline at end of file diff --git a/googlemock/docs/v1_6/CheatSheet.md b/googlemock/docs/v1_6/CheatSheet.md new file mode 100644 index 0000000..91de1d2 --- /dev/null +++ b/googlemock/docs/v1_6/CheatSheet.md @@ -0,0 +1,534 @@ + + +# Defining a Mock Class # + +## Mocking a Normal Class ## + +Given +``` +class Foo { + ... + virtual ~Foo(); + virtual int GetSize() const = 0; + virtual string Describe(const char* name) = 0; + virtual string Describe(int type) = 0; + virtual bool Process(Bar elem, int count) = 0; +}; +``` +(note that `~Foo()` **must** be virtual) we can define its mock as +``` +#include "gmock/gmock.h" + +class MockFoo : public Foo { + MOCK_CONST_METHOD0(GetSize, int()); + MOCK_METHOD1(Describe, string(const char* name)); + MOCK_METHOD1(Describe, string(int type)); + MOCK_METHOD2(Process, bool(Bar elem, int count)); +}; +``` + +To create a "nice" mock object which ignores all uninteresting calls, +or a "strict" mock object, which treats them as failures: +``` +NiceMock nice_foo; // The type is a subclass of MockFoo. +StrictMock strict_foo; // The type is a subclass of MockFoo. +``` + +## Mocking a Class Template ## + +To mock +``` +template +class StackInterface { + public: + ... + virtual ~StackInterface(); + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; +``` +(note that `~StackInterface()` **must** be virtual) just append `_T` to the `MOCK_*` macros: +``` +template +class MockStack : public StackInterface { + public: + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Specifying Calling Conventions for Mock Functions ## + +If your mock function doesn't use the default calling convention, you +can specify it by appending `_WITH_CALLTYPE` to any of the macros +described in the previous two sections and supplying the calling +convention as the first argument to the macro. For example, +``` + MOCK_METHOD_1_WITH_CALLTYPE(STDMETHODCALLTYPE, Foo, bool(int n)); + MOCK_CONST_METHOD2_WITH_CALLTYPE(STDMETHODCALLTYPE, Bar, int(double x, double y)); +``` +where `STDMETHODCALLTYPE` is defined by `` on Windows. + +# Using Mocks in Tests # + +The typical flow is: + 1. Import the Google Mock names you need to use. All Google Mock names are in the `testing` namespace unless they are macros or otherwise noted. + 1. Create the mock objects. + 1. Optionally, set the default actions of the mock objects. + 1. Set your expectations on the mock objects (How will they be called? What wil they do?). + 1. Exercise code that uses the mock objects; if necessary, check the result using [Google Test](http://code.google.com/p/googletest/) assertions. + 1. When a mock objects is destructed, Google Mock automatically verifies that all expectations on it have been satisfied. + +Here is an example: +``` +using ::testing::Return; // #1 + +TEST(BarTest, DoesThis) { + MockFoo foo; // #2 + + ON_CALL(foo, GetSize()) // #3 + .WillByDefault(Return(1)); + // ... other default actions ... + + EXPECT_CALL(foo, Describe(5)) // #4 + .Times(3) + .WillRepeatedly(Return("Category 5")); + // ... other expectations ... + + EXPECT_EQ("good", MyProductionFunction(&foo)); // #5 +} // #6 +``` + +# Setting Default Actions # + +Google Mock has a **built-in default action** for any function that +returns `void`, `bool`, a numeric value, or a pointer. + +To customize the default action for functions with return type `T` globally: +``` +using ::testing::DefaultValue; + +DefaultValue::Set(value); // Sets the default value to be returned. +// ... use the mocks ... +DefaultValue::Clear(); // Resets the default value. +``` + +To customize the default action for a particular method, use `ON_CALL()`: +``` +ON_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .WillByDefault(action); +``` + +# Setting Expectations # + +`EXPECT_CALL()` sets **expectations** on a mock method (How will it be +called? What will it do?): +``` +EXPECT_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .Times(cardinality) ? + .InSequence(sequences) * + .After(expectations) * + .WillOnce(action) * + .WillRepeatedly(action) ? + .RetiresOnSaturation(); ? +``` + +If `Times()` is omitted, the cardinality is assumed to be: + + * `Times(1)` when there is neither `WillOnce()` nor `WillRepeatedly()`; + * `Times(n)` when there are `n WillOnce()`s but no `WillRepeatedly()`, where `n` >= 1; or + * `Times(AtLeast(n))` when there are `n WillOnce()`s and a `WillRepeatedly()`, where `n` >= 0. + +A method with no `EXPECT_CALL()` is free to be invoked _any number of times_, and the default action will be taken each time. + +# Matchers # + +A **matcher** matches a _single_ argument. You can use it inside +`ON_CALL()` or `EXPECT_CALL()`, or use it to validate a value +directly: + +| `EXPECT_THAT(value, matcher)` | Asserts that `value` matches `matcher`. | +|:------------------------------|:----------------------------------------| +| `ASSERT_THAT(value, matcher)` | The same as `EXPECT_THAT(value, matcher)`, except that it generates a **fatal** failure. | + +Built-in matchers (where `argument` is the function argument) are +divided into several categories: + +## Wildcard ## +|`_`|`argument` can be any value of the correct type.| +|:--|:-----------------------------------------------| +|`A()` or `An()`|`argument` can be any value of type `type`. | + +## Generic Comparison ## + +|`Eq(value)` or `value`|`argument == value`| +|:---------------------|:------------------| +|`Ge(value)` |`argument >= value`| +|`Gt(value)` |`argument > value` | +|`Le(value)` |`argument <= value`| +|`Lt(value)` |`argument < value` | +|`Ne(value)` |`argument != value`| +|`IsNull()` |`argument` is a `NULL` pointer (raw or smart).| +|`NotNull()` |`argument` is a non-null pointer (raw or smart).| +|`Ref(variable)` |`argument` is a reference to `variable`.| +|`TypedEq(value)`|`argument` has type `type` and is equal to `value`. You may need to use this instead of `Eq(value)` when the mock function is overloaded.| + +Except `Ref()`, these matchers make a _copy_ of `value` in case it's +modified or destructed later. If the compiler complains that `value` +doesn't have a public copy constructor, try wrap it in `ByRef()`, +e.g. `Eq(ByRef(non_copyable_value))`. If you do that, make sure +`non_copyable_value` is not changed afterwards, or the meaning of your +matcher will be changed. + +## Floating-Point Matchers ## + +|`DoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as unequal.| +|:-------------------|:----------------------------------------------------------------------------------------------| +|`FloatEq(a_float)` |`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as unequal. | +|`NanSensitiveDoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as equal. | +|`NanSensitiveFloatEq(a_float)`|`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as equal. | + +These matchers use ULP-based comparison (the same as used in +[Google Test](http://code.google.com/p/googletest/)). They +automatically pick a reasonable error bound based on the absolute +value of the expected value. `DoubleEq()` and `FloatEq()` conform to +the IEEE standard, which requires comparing two NaNs for equality to +return false. The `NanSensitive*` version instead treats two NaNs as +equal, which is often what a user wants. + +## String Matchers ## + +The `argument` can be either a C string or a C++ string object: + +|`ContainsRegex(string)`|`argument` matches the given regular expression.| +|:----------------------|:-----------------------------------------------| +|`EndsWith(suffix)` |`argument` ends with string `suffix`. | +|`HasSubstr(string)` |`argument` contains `string` as a sub-string. | +|`MatchesRegex(string)` |`argument` matches the given regular expression with the match starting at the first character and ending at the last character.| +|`StartsWith(prefix)` |`argument` starts with string `prefix`. | +|`StrCaseEq(string)` |`argument` is equal to `string`, ignoring case. | +|`StrCaseNe(string)` |`argument` is not equal to `string`, ignoring case.| +|`StrEq(string)` |`argument` is equal to `string`. | +|`StrNe(string)` |`argument` is not equal to `string`. | + +`ContainsRegex()` and `MatchesRegex()` use the regular expression +syntax defined +[here](http://code.google.com/p/googletest/wiki/V1_6_AdvancedGuide#Regular_Expression_Syntax). +`StrCaseEq()`, `StrCaseNe()`, `StrEq()`, and `StrNe()` work for wide +strings as well. + +## Container Matchers ## + +Most STL-style containers support `==`, so you can use +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. If you want to write the elements in-line, +match them more flexibly, or get more informative messages, you can use: + +| `Contains(e)` | `argument` contains an element that matches `e`, which can be either a value or a matcher. | +|:--------------|:-------------------------------------------------------------------------------------------| +| `Each(e)` | `argument` is a container where _every_ element matches `e`, which can be either a value or a matcher. | +| `ElementsAre(e0, e1, ..., en)` | `argument` has `n + 1` elements, where the i-th element matches `ei`, which can be a value or a matcher. 0 to 10 arguments are allowed. | +| `ElementsAreArray(array)` or `ElementsAreArray(array, count)` | The same as `ElementsAre()` except that the expected element values/matchers come from a C-style array. | +| `ContainerEq(container)` | The same as `Eq(container)` except that the failure message also includes which elements are in one container but not the other. | +| `Pointwise(m, container)` | `argument` contains the same number of elements as in `container`, and for all i, (the i-th element in `argument`, the i-th element in `container`) match `m`, which is a matcher on 2-tuples. E.g. `Pointwise(Le(), upper_bounds)` verifies that each element in `argument` doesn't exceed the corresponding element in `upper_bounds`. | + +These matchers can also match: + + 1. a native array passed by reference (e.g. in `Foo(const int (&a)[5])`), and + 1. an array passed as a pointer and a count (e.g. in `Bar(const T* buffer, int len)` -- see [Multi-argument Matchers](#Multiargument_Matchers.md)). + +where the array may be multi-dimensional (i.e. its elements can be arrays). + +## Member Matchers ## + +|`Field(&class::field, m)`|`argument.field` (or `argument->field` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| +|:------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------| +|`Key(e)` |`argument.first` matches `e`, which can be either a value or a matcher. E.g. `Contains(Key(Le(5)))` can verify that a `map` contains a key `<= 5`.| +|`Pair(m1, m2)` |`argument` is an `std::pair` whose `first` field matches `m1` and `second` field matches `m2`. | +|`Property(&class::property, m)`|`argument.property()` (or `argument->property()` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| + +## Matching the Result of a Function or Functor ## + +|`ResultOf(f, m)`|`f(argument)` matches matcher `m`, where `f` is a function or functor.| +|:---------------|:---------------------------------------------------------------------| + +## Pointer Matchers ## + +|`Pointee(m)`|`argument` (either a smart pointer or a raw pointer) points to a value that matches matcher `m`.| +|:-----------|:-----------------------------------------------------------------------------------------------| + +## Multiargument Matchers ## + +Technically, all matchers match a _single_ value. A "multi-argument" +matcher is just one that matches a _tuple_. The following matchers can +be used to match a tuple `(x, y)`: + +|`Eq()`|`x == y`| +|:-----|:-------| +|`Ge()`|`x >= y`| +|`Gt()`|`x > y` | +|`Le()`|`x <= y`| +|`Lt()`|`x < y` | +|`Ne()`|`x != y`| + +You can use the following selectors to pick a subset of the arguments +(or reorder them) to participate in the matching: + +|`AllArgs(m)`|Equivalent to `m`. Useful as syntactic sugar in `.With(AllArgs(m))`.| +|:-----------|:-------------------------------------------------------------------| +|`Args(m)`|The tuple of the `k` selected (using 0-based indices) arguments matches `m`, e.g. `Args<1, 2>(Eq())`.| + +## Composite Matchers ## + +You can make a matcher from one or more other matchers: + +|`AllOf(m1, m2, ..., mn)`|`argument` matches all of the matchers `m1` to `mn`.| +|:-----------------------|:---------------------------------------------------| +|`AnyOf(m1, m2, ..., mn)`|`argument` matches at least one of the matchers `m1` to `mn`.| +|`Not(m)` |`argument` doesn't match matcher `m`. | + +## Adapters for Matchers ## + +|`MatcherCast(m)`|casts matcher `m` to type `Matcher`.| +|:------------------|:--------------------------------------| +|`SafeMatcherCast(m)`| [safely casts](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Casting_Matchers) matcher `m` to type `Matcher`. | +|`Truly(predicate)` |`predicate(argument)` returns something considered by C++ to be true, where `predicate` is a function or functor.| + +## Matchers as Predicates ## + +|`Matches(m)(value)`|evaluates to `true` if `value` matches `m`. You can use `Matches(m)` alone as a unary functor.| +|:------------------|:---------------------------------------------------------------------------------------------| +|`ExplainMatchResult(m, value, result_listener)`|evaluates to `true` if `value` matches `m`, explaining the result to `result_listener`. | +|`Value(value, m)` |evaluates to `true` if `value` matches `m`. | + +## Defining Matchers ## + +| `MATCHER(IsEven, "") { return (arg % 2) == 0; }` | Defines a matcher `IsEven()` to match an even number. | +|:-------------------------------------------------|:------------------------------------------------------| +| `MATCHER_P(IsDivisibleBy, n, "") { *result_listener << "where the remainder is " << (arg % n); return (arg % n) == 0; }` | Defines a macher `IsDivisibleBy(n)` to match a number divisible by `n`. | +| `MATCHER_P2(IsBetween, a, b, std::string(negation ? "isn't" : "is") + " between " + PrintToString(a) + " and " + PrintToString(b)) { return a <= arg && arg <= b; }` | Defines a matcher `IsBetween(a, b)` to match a value in the range [`a`, `b`]. | + +**Notes:** + + 1. The `MATCHER*` macros cannot be used inside a function or class. + 1. The matcher body must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). + 1. You can use `PrintToString(x)` to convert a value `x` of any type to a string. + +## Matchers as Test Assertions ## + +|`ASSERT_THAT(expression, m)`|Generates a [fatal failure](http://code.google.com/p/googletest/wiki/V1_6_Primer#Assertions) if the value of `expression` doesn't match matcher `m`.| +|:---------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------------| +|`EXPECT_THAT(expression, m)`|Generates a non-fatal failure if the value of `expression` doesn't match matcher `m`. | + +# Actions # + +**Actions** specify what a mock function should do when invoked. + +## Returning a Value ## + +|`Return()`|Return from a `void` mock function.| +|:---------|:----------------------------------| +|`Return(value)`|Return `value`. If the type of `value` is different to the mock function's return type, `value` is converted to the latter type at the time the expectation is set, not when the action is executed.| +|`ReturnArg()`|Return the `N`-th (0-based) argument.| +|`ReturnNew(a1, ..., ak)`|Return `new T(a1, ..., ak)`; a different object is created each time.| +|`ReturnNull()`|Return a null pointer. | +|`ReturnPointee(ptr)`|Return the value pointed to by `ptr`.| +|`ReturnRef(variable)`|Return a reference to `variable`. | +|`ReturnRefOfCopy(value)`|Return a reference to a copy of `value`; the copy lives as long as the action.| + +## Side Effects ## + +|`Assign(&variable, value)`|Assign `value` to variable.| +|:-------------------------|:--------------------------| +| `DeleteArg()` | Delete the `N`-th (0-based) argument, which must be a pointer. | +| `SaveArg(pointer)` | Save the `N`-th (0-based) argument to `*pointer`. | +| `SaveArgPointee(pointer)` | Save the value pointed to by the `N`-th (0-based) argument to `*pointer`. | +| `SetArgReferee(value)` | Assign value to the variable referenced by the `N`-th (0-based) argument. | +|`SetArgPointee(value)` |Assign `value` to the variable pointed by the `N`-th (0-based) argument.| +|`SetArgumentPointee(value)`|Same as `SetArgPointee(value)`. Deprecated. Will be removed in v1.7.0.| +|`SetArrayArgument(first, last)`|Copies the elements in source range [`first`, `last`) to the array pointed to by the `N`-th (0-based) argument, which can be either a pointer or an iterator. The action does not take ownership of the elements in the source range.| +|`SetErrnoAndReturn(error, value)`|Set `errno` to `error` and return `value`.| +|`Throw(exception)` |Throws the given exception, which can be any copyable value. Available since v1.1.0.| + +## Using a Function or a Functor as an Action ## + +|`Invoke(f)`|Invoke `f` with the arguments passed to the mock function, where `f` can be a global/static function or a functor.| +|:----------|:-----------------------------------------------------------------------------------------------------------------| +|`Invoke(object_pointer, &class::method)`|Invoke the {method on the object with the arguments passed to the mock function. | +|`InvokeWithoutArgs(f)`|Invoke `f`, which can be a global/static function or a functor. `f` must take no arguments. | +|`InvokeWithoutArgs(object_pointer, &class::method)`|Invoke the method on the object, which takes no arguments. | +|`InvokeArgument(arg1, arg2, ..., argk)`|Invoke the mock function's `N`-th (0-based) argument, which must be a function or a functor, with the `k` arguments.| + +The return value of the invoked function is used as the return value +of the action. + +When defining a function or functor to be used with `Invoke*()`, you can declare any unused parameters as `Unused`: +``` + double Distance(Unused, double x, double y) { return sqrt(x*x + y*y); } + ... + EXPECT_CALL(mock, Foo("Hi", _, _)).WillOnce(Invoke(Distance)); +``` + +In `InvokeArgument(...)`, if an argument needs to be passed by reference, wrap it inside `ByRef()`. For example, +``` + InvokeArgument<2>(5, string("Hi"), ByRef(foo)) +``` +calls the mock function's #2 argument, passing to it `5` and `string("Hi")` by value, and `foo` by reference. + +## Default Action ## + +|`DoDefault()`|Do the default action (specified by `ON_CALL()` or the built-in one).| +|:------------|:--------------------------------------------------------------------| + +**Note:** due to technical reasons, `DoDefault()` cannot be used inside a composite action - trying to do so will result in a run-time error. + +## Composite Actions ## + +|`DoAll(a1, a2, ..., an)`|Do all actions `a1` to `an` and return the result of `an` in each invocation. The first `n - 1` sub-actions must return void. | +|:-----------------------|:-----------------------------------------------------------------------------------------------------------------------------| +|`IgnoreResult(a)` |Perform action `a` and ignore its result. `a` must not return void. | +|`WithArg(a)` |Pass the `N`-th (0-based) argument of the mock function to action `a` and perform it. | +|`WithArgs(a)`|Pass the selected (0-based) arguments of the mock function to action `a` and perform it. | +|`WithoutArgs(a)` |Perform action `a` without any arguments. | + +## Defining Actions ## + +| `ACTION(Sum) { return arg0 + arg1; }` | Defines an action `Sum()` to return the sum of the mock function's argument #0 and #1. | +|:--------------------------------------|:---------------------------------------------------------------------------------------| +| `ACTION_P(Plus, n) { return arg0 + n; }` | Defines an action `Plus(n)` to return the sum of the mock function's argument #0 and `n`. | +| `ACTION_Pk(Foo, p1, ..., pk) { statements; }` | Defines a parameterized action `Foo(p1, ..., pk)` to execute the given `statements`. | + +The `ACTION*` macros cannot be used inside a function or class. + +# Cardinalities # + +These are used in `Times()` to specify how many times a mock function will be called: + +|`AnyNumber()`|The function can be called any number of times.| +|:------------|:----------------------------------------------| +|`AtLeast(n)` |The call is expected at least `n` times. | +|`AtMost(n)` |The call is expected at most `n` times. | +|`Between(m, n)`|The call is expected between `m` and `n` (inclusive) times.| +|`Exactly(n) or n`|The call is expected exactly `n` times. In particular, the call should never happen when `n` is 0.| + +# Expectation Order # + +By default, the expectations can be matched in _any_ order. If some +or all expectations must be matched in a given order, there are two +ways to specify it. They can be used either independently or +together. + +## The After Clause ## + +``` +using ::testing::Expectation; +... +Expectation init_x = EXPECT_CALL(foo, InitX()); +Expectation init_y = EXPECT_CALL(foo, InitY()); +EXPECT_CALL(foo, Bar()) + .After(init_x, init_y); +``` +says that `Bar()` can be called only after both `InitX()` and +`InitY()` have been called. + +If you don't know how many pre-requisites an expectation has when you +write it, you can use an `ExpectationSet` to collect them: + +``` +using ::testing::ExpectationSet; +... +ExpectationSet all_inits; +for (int i = 0; i < element_count; i++) { + all_inits += EXPECT_CALL(foo, InitElement(i)); +} +EXPECT_CALL(foo, Bar()) + .After(all_inits); +``` +says that `Bar()` can be called only after all elements have been +initialized (but we don't care about which elements get initialized +before the others). + +Modifying an `ExpectationSet` after using it in an `.After()` doesn't +affect the meaning of the `.After()`. + +## Sequences ## + +When you have a long chain of sequential expectations, it's easier to +specify the order using **sequences**, which don't require you to given +each expectation in the chain a different name. All expected
+calls in the same sequence must occur in the order they are +specified. + +``` +using ::testing::Sequence; +Sequence s1, s2; +... +EXPECT_CALL(foo, Reset()) + .InSequence(s1, s2) + .WillOnce(Return(true)); +EXPECT_CALL(foo, GetSize()) + .InSequence(s1) + .WillOnce(Return(1)); +EXPECT_CALL(foo, Describe(A())) + .InSequence(s2) + .WillOnce(Return("dummy")); +``` +says that `Reset()` must be called before _both_ `GetSize()` _and_ +`Describe()`, and the latter two can occur in any order. + +To put many expectations in a sequence conveniently: +``` +using ::testing::InSequence; +{ + InSequence dummy; + + EXPECT_CALL(...)...; + EXPECT_CALL(...)...; + ... + EXPECT_CALL(...)...; +} +``` +says that all expected calls in the scope of `dummy` must occur in +strict order. The name `dummy` is irrelevant.) + +# Verifying and Resetting a Mock # + +Google Mock will verify the expectations on a mock object when it is destructed, or you can do it earlier: +``` +using ::testing::Mock; +... +// Verifies and removes the expectations on mock_obj; +// returns true iff successful. +Mock::VerifyAndClearExpectations(&mock_obj); +... +// Verifies and removes the expectations on mock_obj; +// also removes the default actions set by ON_CALL(); +// returns true iff successful. +Mock::VerifyAndClear(&mock_obj); +``` + +You can also tell Google Mock that a mock object can be leaked and doesn't +need to be verified: +``` +Mock::AllowLeak(&mock_obj); +``` + +# Mock Classes # + +Google Mock defines a convenient mock class template +``` +class MockFunction { + public: + MOCK_METHODn(Call, R(A1, ..., An)); +}; +``` +See this [recipe](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Using_Check_Points) for one application of it. + +# Flags # + +| `--gmock_catch_leaked_mocks=0` | Don't report leaked mock objects as failures. | +|:-------------------------------|:----------------------------------------------| +| `--gmock_verbose=LEVEL` | Sets the default verbosity level (`info`, `warning`, or `error`) of Google Mock messages. | \ No newline at end of file diff --git a/googlemock/docs/v1_6/CookBook.md b/googlemock/docs/v1_6/CookBook.md new file mode 100644 index 0000000..f5975a0 --- /dev/null +++ b/googlemock/docs/v1_6/CookBook.md @@ -0,0 +1,3342 @@ + + +You can find recipes for using Google Mock here. If you haven't yet, +please read the [ForDummies](V1_6_ForDummies.md) document first to make sure you understand +the basics. + +**Note:** Google Mock lives in the `testing` name space. For +readability, it is recommended to write `using ::testing::Foo;` once in +your file before using the name `Foo` defined by Google Mock. We omit +such `using` statements in this page for brevity, but you should do it +in your own code. + +# Creating Mock Classes # + +## Mocking Private or Protected Methods ## + +You must always put a mock method definition (`MOCK_METHOD*`) in a +`public:` section of the mock class, regardless of the method being +mocked being `public`, `protected`, or `private` in the base class. +This allows `ON_CALL` and `EXPECT_CALL` to reference the mock function +from outside of the mock class. (Yes, C++ allows a subclass to change +the access level of a virtual function in the base class.) Example: + +``` +class Foo { + public: + ... + virtual bool Transform(Gadget* g) = 0; + + protected: + virtual void Resume(); + + private: + virtual int GetTimeOut(); +}; + +class MockFoo : public Foo { + public: + ... + MOCK_METHOD1(Transform, bool(Gadget* g)); + + // The following must be in the public section, even though the + // methods are protected or private in the base class. + MOCK_METHOD0(Resume, void()); + MOCK_METHOD0(GetTimeOut, int()); +}; +``` + +## Mocking Overloaded Methods ## + +You can mock overloaded functions as usual. No special attention is required: + +``` +class Foo { + ... + + // Must be virtual as we'll inherit from Foo. + virtual ~Foo(); + + // Overloaded on the types and/or numbers of arguments. + virtual int Add(Element x); + virtual int Add(int times, Element x); + + // Overloaded on the const-ness of this object. + virtual Bar& GetBar(); + virtual const Bar& GetBar() const; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Add, int(Element x)); + MOCK_METHOD2(Add, int(int times, Element x); + + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +``` + +**Note:** if you don't mock all versions of the overloaded method, the +compiler will give you a warning about some methods in the base class +being hidden. To fix that, use `using` to bring them in scope: + +``` +class MockFoo : public Foo { + ... + using Foo::Add; + MOCK_METHOD1(Add, int(Element x)); + // We don't want to mock int Add(int times, Element x); + ... +}; +``` + +## Mocking Class Templates ## + +To mock a class template, append `_T` to the `MOCK_*` macros: + +``` +template +class StackInterface { + ... + // Must be virtual as we'll inherit from StackInterface. + virtual ~StackInterface(); + + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; + +template +class MockStack : public StackInterface { + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Mocking Nonvirtual Methods ## + +Google Mock can mock non-virtual functions to be used in what we call _hi-perf +dependency injection_. + +In this case, instead of sharing a common base class with the real +class, your mock class will be _unrelated_ to the real class, but +contain methods with the same signatures. The syntax for mocking +non-virtual methods is the _same_ as mocking virtual methods: + +``` +// A simple packet stream class. None of its members is virtual. +class ConcretePacketStream { + public: + void AppendPacket(Packet* new_packet); + const Packet* GetPacket(size_t packet_number) const; + size_t NumberOfPackets() const; + ... +}; + +// A mock packet stream class. It inherits from no other, but defines +// GetPacket() and NumberOfPackets(). +class MockPacketStream { + public: + MOCK_CONST_METHOD1(GetPacket, const Packet*(size_t packet_number)); + MOCK_CONST_METHOD0(NumberOfPackets, size_t()); + ... +}; +``` + +Note that the mock class doesn't define `AppendPacket()`, unlike the +real class. That's fine as long as the test doesn't need to call it. + +Next, you need a way to say that you want to use +`ConcretePacketStream` in production code, and use `MockPacketStream` +in tests. Since the functions are not virtual and the two classes are +unrelated, you must specify your choice at _compile time_ (as opposed +to run time). + +One way to do it is to templatize your code that needs to use a packet +stream. More specifically, you will give your code a template type +argument for the type of the packet stream. In production, you will +instantiate your template with `ConcretePacketStream` as the type +argument. In tests, you will instantiate the same template with +`MockPacketStream`. For example, you may write: + +``` +template +void CreateConnection(PacketStream* stream) { ... } + +template +class PacketReader { + public: + void ReadPackets(PacketStream* stream, size_t packet_num); +}; +``` + +Then you can use `CreateConnection()` and +`PacketReader` in production code, and use +`CreateConnection()` and +`PacketReader` in tests. + +``` + MockPacketStream mock_stream; + EXPECT_CALL(mock_stream, ...)...; + .. set more expectations on mock_stream ... + PacketReader reader(&mock_stream); + ... exercise reader ... +``` + +## Mocking Free Functions ## + +It's possible to use Google Mock to mock a free function (i.e. a +C-style function or a static method). You just need to rewrite your +code to use an interface (abstract class). + +Instead of calling a free function (say, `OpenFile`) directly, +introduce an interface for it and have a concrete subclass that calls +the free function: + +``` +class FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) = 0; +}; + +class File : public FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) { + return OpenFile(path, mode); + } +}; +``` + +Your code should talk to `FileInterface` to open a file. Now it's +easy to mock out the function. + +This may seem much hassle, but in practice you often have multiple +related functions that you can put in the same interface, so the +per-function syntactic overhead will be much lower. + +If you are concerned about the performance overhead incurred by +virtual functions, and profiling confirms your concern, you can +combine this with the recipe for [mocking non-virtual methods](#Mocking_Nonvirtual_Methods.md). + +## Nice Mocks and Strict Mocks ## + +If a mock method has no `EXPECT_CALL` spec but is called, Google Mock +will print a warning about the "uninteresting call". The rationale is: + + * New methods may be added to an interface after a test is written. We shouldn't fail a test just because a method it doesn't know about is called. + * However, this may also mean there's a bug in the test, so Google Mock shouldn't be silent either. If the user believes these calls are harmless, he can add an `EXPECT_CALL()` to suppress the warning. + +However, sometimes you may want to suppress all "uninteresting call" +warnings, while sometimes you may want the opposite, i.e. to treat all +of them as errors. Google Mock lets you make the decision on a +per-mock-object basis. + +Suppose your test uses a mock class `MockFoo`: + +``` +TEST(...) { + MockFoo mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +If a method of `mock_foo` other than `DoThis()` is called, it will be +reported by Google Mock as a warning. However, if you rewrite your +test to use `NiceMock` instead, the warning will be gone, +resulting in a cleaner test output: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +`NiceMock` is a subclass of `MockFoo`, so it can be used +wherever `MockFoo` is accepted. + +It also works if `MockFoo`'s constructor takes some arguments, as +`NiceMock` "inherits" `MockFoo`'s constructors: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo(5, "hi"); // Calls MockFoo(5, "hi"). + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +The usage of `StrictMock` is similar, except that it makes all +uninteresting calls failures: + +``` +using ::testing::StrictMock; + +TEST(...) { + StrictMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... + + // The test will fail if a method of mock_foo other than DoThis() + // is called. +} +``` + +There are some caveats though (I don't like them just as much as the +next guy, but sadly they are side effects of C++'s limitations): + + 1. `NiceMock` and `StrictMock` only work for mock methods defined using the `MOCK_METHOD*` family of macros **directly** in the `MockFoo` class. If a mock method is defined in a **base class** of `MockFoo`, the "nice" or "strict" modifier may not affect it, depending on the compiler. In particular, nesting `NiceMock` and `StrictMock` (e.g. `NiceMock >`) is **not** supported. + 1. The constructors of the base mock (`MockFoo`) cannot have arguments passed by non-const reference, which happens to be banned by the [Google C++ style guide](http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml). + 1. During the constructor or destructor of `MockFoo`, the mock object is _not_ nice or strict. This may cause surprises if the constructor or destructor calls a mock method on `this` object. (This behavior, however, is consistent with C++'s general rule: if a constructor or destructor calls a virtual method of `this` object, that method is treated as non-virtual. In other words, to the base class's constructor or destructor, `this` object behaves like an instance of the base class, not the derived class. This rule is required for safety. Otherwise a base constructor may use members of a derived class before they are initialized, or a base destructor may use members of a derived class after they have been destroyed.) + +Finally, you should be **very cautious** when using this feature, as the +decision you make applies to **all** future changes to the mock +class. If an important change is made in the interface you are mocking +(and thus in the mock class), it could break your tests (if you use +`StrictMock`) or let bugs pass through without a warning (if you use +`NiceMock`). Therefore, try to specify the mock's behavior using +explicit `EXPECT_CALL` first, and only turn to `NiceMock` or +`StrictMock` as the last resort. + +## Simplifying the Interface without Breaking Existing Code ## + +Sometimes a method has a long list of arguments that is mostly +uninteresting. For example, + +``` +class LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, + const struct tm* tm_time, + const char* message, size_t message_len) = 0; +}; +``` + +This method's argument list is lengthy and hard to work with (let's +say that the `message` argument is not even 0-terminated). If we mock +it as is, using the mock will be awkward. If, however, we try to +simplify this interface, we'll need to fix all clients depending on +it, which is often infeasible. + +The trick is to re-dispatch the method in the mock class: + +``` +class ScopedMockLog : public LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, const tm* tm_time, + const char* message, size_t message_len) { + // We are only interested in the log severity, full file name, and + // log message. + Log(severity, full_filename, std::string(message, message_len)); + } + + // Implements the mock method: + // + // void Log(LogSeverity severity, + // const string& file_path, + // const string& message); + MOCK_METHOD3(Log, void(LogSeverity severity, const string& file_path, + const string& message)); +}; +``` + +By defining a new mock method with a trimmed argument list, we make +the mock class much more user-friendly. + +## Alternative to Mocking Concrete Classes ## + +Often you may find yourself using classes that don't implement +interfaces. In order to test your code that uses such a class (let's +call it `Concrete`), you may be tempted to make the methods of +`Concrete` virtual and then mock it. + +Try not to do that. + +Making a non-virtual function virtual is a big decision. It creates an +extension point where subclasses can tweak your class' behavior. This +weakens your control on the class because now it's harder to maintain +the class' invariants. You should make a function virtual only when +there is a valid reason for a subclass to override it. + +Mocking concrete classes directly is problematic as it creates a tight +coupling between the class and the tests - any small change in the +class may invalidate your tests and make test maintenance a pain. + +To avoid such problems, many programmers have been practicing "coding +to interfaces": instead of talking to the `Concrete` class, your code +would define an interface and talk to it. Then you implement that +interface as an adaptor on top of `Concrete`. In tests, you can easily +mock that interface to observe how your code is doing. + +This technique incurs some overhead: + + * You pay the cost of virtual function calls (usually not a problem). + * There is more abstraction for the programmers to learn. + +However, it can also bring significant benefits in addition to better +testability: + + * `Concrete`'s API may not fit your problem domain very well, as you may not be the only client it tries to serve. By designing your own interface, you have a chance to tailor it to your need - you may add higher-level functionalities, rename stuff, etc instead of just trimming the class. This allows you to write your code (user of the interface) in a more natural way, which means it will be more readable, more maintainable, and you'll be more productive. + * If `Concrete`'s implementation ever has to change, you don't have to rewrite everywhere it is used. Instead, you can absorb the change in your implementation of the interface, and your other code and tests will be insulated from this change. + +Some people worry that if everyone is practicing this technique, they +will end up writing lots of redundant code. This concern is totally +understandable. However, there are two reasons why it may not be the +case: + + * Different projects may need to use `Concrete` in different ways, so the best interfaces for them will be different. Therefore, each of them will have its own domain-specific interface on top of `Concrete`, and they will not be the same code. + * If enough projects want to use the same interface, they can always share it, just like they have been sharing `Concrete`. You can check in the interface and the adaptor somewhere near `Concrete` (perhaps in a `contrib` sub-directory) and let many projects use it. + +You need to weigh the pros and cons carefully for your particular +problem, but I'd like to assure you that the Java community has been +practicing this for a long time and it's a proven effective technique +applicable in a wide variety of situations. :-) + +## Delegating Calls to a Fake ## + +Some times you have a non-trivial fake implementation of an +interface. For example: + +``` +class Foo { + public: + virtual ~Foo() {} + virtual char DoThis(int n) = 0; + virtual void DoThat(const char* s, int* p) = 0; +}; + +class FakeFoo : public Foo { + public: + virtual char DoThis(int n) { + return (n > 0) ? '+' : + (n < 0) ? '-' : '0'; + } + + virtual void DoThat(const char* s, int* p) { + *p = strlen(s); + } +}; +``` + +Now you want to mock this interface such that you can set expectations +on it. However, you also want to use `FakeFoo` for the default +behavior, as duplicating it in the mock object is, well, a lot of +work. + +When you define the mock class using Google Mock, you can have it +delegate its default action to a fake class you already have, using +this pattern: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + // Normal mock method definitions using Google Mock. + MOCK_METHOD1(DoThis, char(int n)); + MOCK_METHOD2(DoThat, void(const char* s, int* p)); + + // Delegates the default actions of the methods to a FakeFoo object. + // This must be called *before* the custom ON_CALL() statements. + void DelegateToFake() { + ON_CALL(*this, DoThis(_)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThis)); + ON_CALL(*this, DoThat(_, _)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThat)); + } + private: + FakeFoo fake_; // Keeps an instance of the fake in the mock. +}; +``` + +With that, you can use `MockFoo` in your tests as usual. Just remember +that if you don't explicitly set an action in an `ON_CALL()` or +`EXPECT_CALL()`, the fake will be called upon to do it: + +``` +using ::testing::_; + +TEST(AbcTest, Xyz) { + MockFoo foo; + foo.DelegateToFake(); // Enables the fake for delegation. + + // Put your ON_CALL(foo, ...)s here, if any. + + // No action specified, meaning to use the default action. + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(foo, DoThat(_, _)); + + int n = 0; + EXPECT_EQ('+', foo.DoThis(5)); // FakeFoo::DoThis() is invoked. + foo.DoThat("Hi", &n); // FakeFoo::DoThat() is invoked. + EXPECT_EQ(2, n); +} +``` + +**Some tips:** + + * If you want, you can still override the default action by providing your own `ON_CALL()` or using `.WillOnce()` / `.WillRepeatedly()` in `EXPECT_CALL()`. + * In `DelegateToFake()`, you only need to delegate the methods whose fake implementation you intend to use. + * The general technique discussed here works for overloaded methods, but you'll need to tell the compiler which version you mean. To disambiguate a mock function (the one you specify inside the parentheses of `ON_CALL()`), see the "Selecting Between Overloaded Functions" section on this page; to disambiguate a fake function (the one you place inside `Invoke()`), use a `static_cast` to specify the function's type. + * Having to mix a mock and a fake is often a sign of something gone wrong. Perhaps you haven't got used to the interaction-based way of testing yet. Or perhaps your interface is taking on too many roles and should be split up. Therefore, **don't abuse this**. We would only recommend to do it as an intermediate step when you are refactoring your code. + +Regarding the tip on mixing a mock and a fake, here's an example on +why it may be a bad sign: Suppose you have a class `System` for +low-level system operations. In particular, it does file and I/O +operations. And suppose you want to test how your code uses `System` +to do I/O, and you just want the file operations to work normally. If +you mock out the entire `System` class, you'll have to provide a fake +implementation for the file operation part, which suggests that +`System` is taking on too many roles. + +Instead, you can define a `FileOps` interface and an `IOOps` interface +and split `System`'s functionalities into the two. Then you can mock +`IOOps` without mocking `FileOps`. + +## Delegating Calls to a Real Object ## + +When using testing doubles (mocks, fakes, stubs, and etc), sometimes +their behaviors will differ from those of the real objects. This +difference could be either intentional (as in simulating an error such +that you can test the error handling code) or unintentional. If your +mocks have different behaviors than the real objects by mistake, you +could end up with code that passes the tests but fails in production. + +You can use the _delegating-to-real_ technique to ensure that your +mock has the same behavior as the real object while retaining the +ability to validate calls. This technique is very similar to the +delegating-to-fake technique, the difference being that we use a real +object instead of a fake. Here's an example: + +``` +using ::testing::_; +using ::testing::AtLeast; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MockFoo() { + // By default, all calls are delegated to the real object. + ON_CALL(*this, DoThis()) + .WillByDefault(Invoke(&real_, &Foo::DoThis)); + ON_CALL(*this, DoThat(_)) + .WillByDefault(Invoke(&real_, &Foo::DoThat)); + ... + } + MOCK_METHOD0(DoThis, ...); + MOCK_METHOD1(DoThat, ...); + ... + private: + Foo real_; +}; +... + + MockFoo mock; + + EXPECT_CALL(mock, DoThis()) + .Times(3); + EXPECT_CALL(mock, DoThat("Hi")) + .Times(AtLeast(1)); + ... use mock in test ... +``` + +With this, Google Mock will verify that your code made the right calls +(with the right arguments, in the right order, called the right number +of times, etc), and a real object will answer the calls (so the +behavior will be the same as in production). This gives you the best +of both worlds. + +## Delegating Calls to a Parent Class ## + +Ideally, you should code to interfaces, whose methods are all pure +virtual. In reality, sometimes you do need to mock a virtual method +that is not pure (i.e, it already has an implementation). For example: + +``` +class Foo { + public: + virtual ~Foo(); + + virtual void Pure(int n) = 0; + virtual int Concrete(const char* str) { ... } +}; + +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); +}; +``` + +Sometimes you may want to call `Foo::Concrete()` instead of +`MockFoo::Concrete()`. Perhaps you want to do it as part of a stub +action, or perhaps your test doesn't need to mock `Concrete()` at all +(but it would be oh-so painful to have to define a new mock class +whenever you don't need to mock one of its methods). + +The trick is to leave a back door in your mock class for accessing the +real methods in the base class: + +``` +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); + + // Use this to call Concrete() defined in Foo. + int FooConcrete(const char* str) { return Foo::Concrete(str); } +}; +``` + +Now, you can call `Foo::Concrete()` inside an action by: + +``` +using ::testing::_; +using ::testing::Invoke; +... + EXPECT_CALL(foo, Concrete(_)) + .WillOnce(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +or tell the mock object that you don't want to mock `Concrete()`: + +``` +using ::testing::Invoke; +... + ON_CALL(foo, Concrete(_)) + .WillByDefault(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +(Why don't we just write `Invoke(&foo, &Foo::Concrete)`? If you do +that, `MockFoo::Concrete()` will be called (and cause an infinite +recursion) since `Foo::Concrete()` is virtual. That's just how C++ +works.) + +# Using Matchers # + +## Matching Argument Values Exactly ## + +You can specify exactly which arguments a mock method is expecting: + +``` +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(5)) + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", bar)); +``` + +## Using Simple Matchers ## + +You can use matchers to match arguments that have a certain property: + +``` +using ::testing::Ge; +using ::testing::NotNull; +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(Ge(5))) // The argument must be >= 5. + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", NotNull())); + // The second argument must not be NULL. +``` + +A frequently used matcher is `_`, which matches anything: + +``` +using ::testing::_; +using ::testing::NotNull; +... + EXPECT_CALL(foo, DoThat(_, NotNull())); +``` + +## Combining Matchers ## + +You can build complex matchers from existing ones using `AllOf()`, +`AnyOf()`, and `Not()`: + +``` +using ::testing::AllOf; +using ::testing::Gt; +using ::testing::HasSubstr; +using ::testing::Ne; +using ::testing::Not; +... + // The argument must be > 5 and != 10. + EXPECT_CALL(foo, DoThis(AllOf(Gt(5), + Ne(10)))); + + // The first argument must not contain sub-string "blah". + EXPECT_CALL(foo, DoThat(Not(HasSubstr("blah")), + NULL)); +``` + +## Casting Matchers ## + +Google Mock matchers are statically typed, meaning that the compiler +can catch your mistake if you use a matcher of the wrong type (for +example, if you use `Eq(5)` to match a `string` argument). Good for +you! + +Sometimes, however, you know what you're doing and want the compiler +to give you some slack. One example is that you have a matcher for +`long` and the argument you want to match is `int`. While the two +types aren't exactly the same, there is nothing really wrong with +using a `Matcher` to match an `int` - after all, we can first +convert the `int` argument to a `long` before giving it to the +matcher. + +To support this need, Google Mock gives you the +`SafeMatcherCast(m)` function. It casts a matcher `m` to type +`Matcher`. To ensure safety, Google Mock checks that (let `U` be the +type `m` accepts): + + 1. Type `T` can be implicitly cast to type `U`; + 1. When both `T` and `U` are built-in arithmetic types (`bool`, integers, and floating-point numbers), the conversion from `T` to `U` is not lossy (in other words, any value representable by `T` can also be represented by `U`); and + 1. When `U` is a reference, `T` must also be a reference (as the underlying matcher may be interested in the address of the `U` value). + +The code won't compile if any of these conditions isn't met. + +Here's one example: + +``` +using ::testing::SafeMatcherCast; + +// A base class and a child class. +class Base { ... }; +class Derived : public Base { ... }; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(DoThis, void(Derived* derived)); +}; +... + + MockFoo foo; + // m is a Matcher we got from somewhere. + EXPECT_CALL(foo, DoThis(SafeMatcherCast(m))); +``` + +If you find `SafeMatcherCast(m)` too limiting, you can use a similar +function `MatcherCast(m)`. The difference is that `MatcherCast` works +as long as you can `static_cast` type `T` to type `U`. + +`MatcherCast` essentially lets you bypass C++'s type system +(`static_cast` isn't always safe as it could throw away information, +for example), so be careful not to misuse/abuse it. + +## Selecting Between Overloaded Functions ## + +If you expect an overloaded function to be called, the compiler may +need some help on which overloaded version it is. + +To disambiguate functions overloaded on the const-ness of this object, +use the `Const()` argument wrapper. + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + ... + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +... + + MockFoo foo; + Bar bar1, bar2; + EXPECT_CALL(foo, GetBar()) // The non-const GetBar(). + .WillOnce(ReturnRef(bar1)); + EXPECT_CALL(Const(foo), GetBar()) // The const GetBar(). + .WillOnce(ReturnRef(bar2)); +``` + +(`Const()` is defined by Google Mock and returns a `const` reference +to its argument.) + +To disambiguate overloaded functions with the same number of arguments +but different argument types, you may need to specify the exact type +of a matcher, either by wrapping your matcher in `Matcher()`, or +using a matcher whose type is fixed (`TypedEq`, `An()`, +etc): + +``` +using ::testing::An; +using ::testing::Lt; +using ::testing::Matcher; +using ::testing::TypedEq; + +class MockPrinter : public Printer { + public: + MOCK_METHOD1(Print, void(int n)); + MOCK_METHOD1(Print, void(char c)); +}; + +TEST(PrinterTest, Print) { + MockPrinter printer; + + EXPECT_CALL(printer, Print(An())); // void Print(int); + EXPECT_CALL(printer, Print(Matcher(Lt(5)))); // void Print(int); + EXPECT_CALL(printer, Print(TypedEq('a'))); // void Print(char); + + printer.Print(3); + printer.Print(6); + printer.Print('a'); +} +``` + +## Performing Different Actions Based on the Arguments ## + +When a mock method is called, the _last_ matching expectation that's +still active will be selected (think "newer overrides older"). So, you +can make a method do different things depending on its argument values +like this: + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Return; +... + // The default case. + EXPECT_CALL(foo, DoThis(_)) + .WillRepeatedly(Return('b')); + + // The more specific case. + EXPECT_CALL(foo, DoThis(Lt(5))) + .WillRepeatedly(Return('a')); +``` + +Now, if `foo.DoThis()` is called with a value less than 5, `'a'` will +be returned; otherwise `'b'` will be returned. + +## Matching Multiple Arguments as a Whole ## + +Sometimes it's not enough to match the arguments individually. For +example, we may want to say that the first argument must be less than +the second argument. The `With()` clause allows us to match +all arguments of a mock function as a whole. For example, + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Ne; +... + EXPECT_CALL(foo, InRange(Ne(0), _)) + .With(Lt()); +``` + +says that the first argument of `InRange()` must not be 0, and must be +less than the second argument. + +The expression inside `With()` must be a matcher of type +`Matcher >`, where `A1`, ..., `An` are the +types of the function arguments. + +You can also write `AllArgs(m)` instead of `m` inside `.With()`. The +two forms are equivalent, but `.With(AllArgs(Lt()))` is more readable +than `.With(Lt())`. + +You can use `Args(m)` to match the `n` selected arguments +(as a tuple) against `m`. For example, + +``` +using ::testing::_; +using ::testing::AllOf; +using ::testing::Args; +using ::testing::Lt; +... + EXPECT_CALL(foo, Blah(_, _, _)) + .With(AllOf(Args<0, 1>(Lt()), Args<1, 2>(Lt()))); +``` + +says that `Blah()` will be called with arguments `x`, `y`, and `z` where +`x < y < z`. + +As a convenience and example, Google Mock provides some matchers for +2-tuples, including the `Lt()` matcher above. See the [CheatSheet](V1_6_CheatSheet.md) for +the complete list. + +Note that if you want to pass the arguments to a predicate of your own +(e.g. `.With(Args<0, 1>(Truly(&MyPredicate)))`), that predicate MUST be +written to take a `tr1::tuple` as its argument; Google Mock will pass the `n` +selected arguments as _one_ single tuple to the predicate. + +## Using Matchers as Predicates ## + +Have you noticed that a matcher is just a fancy predicate that also +knows how to describe itself? Many existing algorithms take predicates +as arguments (e.g. those defined in STL's `` header), and +it would be a shame if Google Mock matchers are not allowed to +participate. + +Luckily, you can use a matcher where a unary predicate functor is +expected by wrapping it inside the `Matches()` function. For example, + +``` +#include +#include + +std::vector v; +... +// How many elements in v are >= 10? +const int count = count_if(v.begin(), v.end(), Matches(Ge(10))); +``` + +Since you can build complex matchers from simpler ones easily using +Google Mock, this gives you a way to conveniently construct composite +predicates (doing the same using STL's `` header is just +painful). For example, here's a predicate that's satisfied by any +number that is >= 0, <= 100, and != 50: + +``` +Matches(AllOf(Ge(0), Le(100), Ne(50))) +``` + +## Using Matchers in Google Test Assertions ## + +Since matchers are basically predicates that also know how to describe +themselves, there is a way to take advantage of them in +[Google Test](http://code.google.com/p/googletest/) assertions. It's +called `ASSERT_THAT` and `EXPECT_THAT`: + +``` + ASSERT_THAT(value, matcher); // Asserts that value matches matcher. + EXPECT_THAT(value, matcher); // The non-fatal version. +``` + +For example, in a Google Test test you can write: + +``` +#include "gmock/gmock.h" + +using ::testing::AllOf; +using ::testing::Ge; +using ::testing::Le; +using ::testing::MatchesRegex; +using ::testing::StartsWith; +... + + EXPECT_THAT(Foo(), StartsWith("Hello")); + EXPECT_THAT(Bar(), MatchesRegex("Line \\d+")); + ASSERT_THAT(Baz(), AllOf(Ge(5), Le(10))); +``` + +which (as you can probably guess) executes `Foo()`, `Bar()`, and +`Baz()`, and verifies that: + + * `Foo()` returns a string that starts with `"Hello"`. + * `Bar()` returns a string that matches regular expression `"Line \\d+"`. + * `Baz()` returns a number in the range [5, 10]. + +The nice thing about these macros is that _they read like +English_. They generate informative messages too. For example, if the +first `EXPECT_THAT()` above fails, the message will be something like: + +``` +Value of: Foo() + Actual: "Hi, world!" +Expected: starts with "Hello" +``` + +**Credit:** The idea of `(ASSERT|EXPECT)_THAT` was stolen from the +[Hamcrest](http://code.google.com/p/hamcrest/) project, which adds +`assertThat()` to JUnit. + +## Using Predicates as Matchers ## + +Google Mock provides a built-in set of matchers. In case you find them +lacking, you can use an arbitray unary predicate function or functor +as a matcher - as long as the predicate accepts a value of the type +you want. You do this by wrapping the predicate inside the `Truly()` +function, for example: + +``` +using ::testing::Truly; + +int IsEven(int n) { return (n % 2) == 0 ? 1 : 0; } +... + + // Bar() must be called with an even number. + EXPECT_CALL(foo, Bar(Truly(IsEven))); +``` + +Note that the predicate function / functor doesn't have to return +`bool`. It works as long as the return value can be used as the +condition in statement `if (condition) ...`. + +## Matching Arguments that Are Not Copyable ## + +When you do an `EXPECT_CALL(mock_obj, Foo(bar))`, Google Mock saves +away a copy of `bar`. When `Foo()` is called later, Google Mock +compares the argument to `Foo()` with the saved copy of `bar`. This +way, you don't need to worry about `bar` being modified or destroyed +after the `EXPECT_CALL()` is executed. The same is true when you use +matchers like `Eq(bar)`, `Le(bar)`, and so on. + +But what if `bar` cannot be copied (i.e. has no copy constructor)? You +could define your own matcher function and use it with `Truly()`, as +the previous couple of recipes have shown. Or, you may be able to get +away from it if you can guarantee that `bar` won't be changed after +the `EXPECT_CALL()` is executed. Just tell Google Mock that it should +save a reference to `bar`, instead of a copy of it. Here's how: + +``` +using ::testing::Eq; +using ::testing::ByRef; +using ::testing::Lt; +... + // Expects that Foo()'s argument == bar. + EXPECT_CALL(mock_obj, Foo(Eq(ByRef(bar)))); + + // Expects that Foo()'s argument < bar. + EXPECT_CALL(mock_obj, Foo(Lt(ByRef(bar)))); +``` + +Remember: if you do this, don't change `bar` after the +`EXPECT_CALL()`, or the result is undefined. + +## Validating a Member of an Object ## + +Often a mock function takes a reference to object as an argument. When +matching the argument, you may not want to compare the entire object +against a fixed object, as that may be over-specification. Instead, +you may need to validate a certain member variable or the result of a +certain getter method of the object. You can do this with `Field()` +and `Property()`. More specifically, + +``` +Field(&Foo::bar, m) +``` + +is a matcher that matches a `Foo` object whose `bar` member variable +satisfies matcher `m`. + +``` +Property(&Foo::baz, m) +``` + +is a matcher that matches a `Foo` object whose `baz()` method returns +a value that satisfies matcher `m`. + +For example: + +> | `Field(&Foo::number, Ge(3))` | Matches `x` where `x.number >= 3`. | +|:-----------------------------|:-----------------------------------| +> | `Property(&Foo::name, StartsWith("John "))` | Matches `x` where `x.name()` starts with `"John "`. | + +Note that in `Property(&Foo::baz, ...)`, method `baz()` must take no +argument and be declared as `const`. + +BTW, `Field()` and `Property()` can also match plain pointers to +objects. For instance, + +``` +Field(&Foo::number, Ge(3)) +``` + +matches a plain pointer `p` where `p->number >= 3`. If `p` is `NULL`, +the match will always fail regardless of the inner matcher. + +What if you want to validate more than one members at the same time? +Remember that there is `AllOf()`. + +## Validating the Value Pointed to by a Pointer Argument ## + +C++ functions often take pointers as arguments. You can use matchers +like `NULL`, `NotNull()`, and other comparison matchers to match a +pointer, but what if you want to make sure the value _pointed to_ by +the pointer, instead of the pointer itself, has a certain property? +Well, you can use the `Pointee(m)` matcher. + +`Pointee(m)` matches a pointer iff `m` matches the value the pointer +points to. For example: + +``` +using ::testing::Ge; +using ::testing::Pointee; +... + EXPECT_CALL(foo, Bar(Pointee(Ge(3)))); +``` + +expects `foo.Bar()` to be called with a pointer that points to a value +greater than or equal to 3. + +One nice thing about `Pointee()` is that it treats a `NULL` pointer as +a match failure, so you can write `Pointee(m)` instead of + +``` + AllOf(NotNull(), Pointee(m)) +``` + +without worrying that a `NULL` pointer will crash your test. + +Also, did we tell you that `Pointee()` works with both raw pointers +**and** smart pointers (`linked_ptr`, `shared_ptr`, `scoped_ptr`, and +etc)? + +What if you have a pointer to pointer? You guessed it - you can use +nested `Pointee()` to probe deeper inside the value. For example, +`Pointee(Pointee(Lt(3)))` matches a pointer that points to a pointer +that points to a number less than 3 (what a mouthful...). + +## Testing a Certain Property of an Object ## + +Sometimes you want to specify that an object argument has a certain +property, but there is no existing matcher that does this. If you want +good error messages, you should define a matcher. If you want to do it +quick and dirty, you could get away with writing an ordinary function. + +Let's say you have a mock function that takes an object of type `Foo`, +which has an `int bar()` method and an `int baz()` method, and you +want to constrain that the argument's `bar()` value plus its `baz()` +value is a given number. Here's how you can define a matcher to do it: + +``` +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class BarPlusBazEqMatcher : public MatcherInterface { + public: + explicit BarPlusBazEqMatcher(int expected_sum) + : expected_sum_(expected_sum) {} + + virtual bool MatchAndExplain(const Foo& foo, + MatchResultListener* listener) const { + return (foo.bar() + foo.baz()) == expected_sum_; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "bar() + baz() equals " << expected_sum_; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "bar() + baz() does not equal " << expected_sum_; + } + private: + const int expected_sum_; +}; + +inline Matcher BarPlusBazEq(int expected_sum) { + return MakeMatcher(new BarPlusBazEqMatcher(expected_sum)); +} + +... + + EXPECT_CALL(..., DoThis(BarPlusBazEq(5)))...; +``` + +## Matching Containers ## + +Sometimes an STL container (e.g. list, vector, map, ...) is passed to +a mock function and you may want to validate it. Since most STL +containers support the `==` operator, you can write +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. + +Sometimes, though, you may want to be more flexible (for example, the +first element must be an exact match, but the second element can be +any positive number, and so on). Also, containers used in tests often +have a small number of elements, and having to define the expected +container out-of-line is a bit of a hassle. + +You can use the `ElementsAre()` matcher in such cases: + +``` +using ::testing::_; +using ::testing::ElementsAre; +using ::testing::Gt; +... + + MOCK_METHOD1(Foo, void(const vector& numbers)); +... + + EXPECT_CALL(mock, Foo(ElementsAre(1, Gt(0), _, 5))); +``` + +The above matcher says that the container must have 4 elements, which +must be 1, greater than 0, anything, and 5 respectively. + +`ElementsAre()` is overloaded to take 0 to 10 arguments. If more are +needed, you can place them in a C-style array and use +`ElementsAreArray()` instead: + +``` +using ::testing::ElementsAreArray; +... + + // ElementsAreArray accepts an array of element values. + const int expected_vector1[] = { 1, 5, 2, 4, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector1))); + + // Or, an array of element matchers. + Matcher expected_vector2 = { 1, Gt(2), _, 3, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector2))); +``` + +In case the array needs to be dynamically created (and therefore the +array size cannot be inferred by the compiler), you can give +`ElementsAreArray()` an additional argument to specify the array size: + +``` +using ::testing::ElementsAreArray; +... + int* const expected_vector3 = new int[count]; + ... fill expected_vector3 with values ... + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector3, count))); +``` + +**Tips:** + + * `ElementAre*()` works with _any_ container that implements the STL iterator concept (i.e. it has a `const_iterator` type and supports `begin()/end()`) and supports `size()`, not just the ones defined in STL. It will even work with container types yet to be written - as long as they follows the above pattern. + * You can use nested `ElementAre*()` to match nested (multi-dimensional) containers. + * If the container is passed by pointer instead of by reference, just write `Pointee(ElementsAre*(...))`. + * The order of elements _matters_ for `ElementsAre*()`. Therefore don't use it with containers whose element order is undefined (e.g. `hash_map`). + +## Sharing Matchers ## + +Under the hood, a Google Mock matcher object consists of a pointer to +a ref-counted implementation object. Copying matchers is allowed and +very efficient, as only the pointer is copied. When the last matcher +that references the implementation object dies, the implementation +object will be deleted. + +Therefore, if you have some complex matcher that you want to use again +and again, there is no need to build it everytime. Just assign it to a +matcher variable and use that variable repeatedly! For example, + +``` + Matcher in_range = AllOf(Gt(5), Le(10)); + ... use in_range as a matcher in multiple EXPECT_CALLs ... +``` + +# Setting Expectations # + +## Ignoring Uninteresting Calls ## + +If you are not interested in how a mock method is called, just don't +say anything about it. In this case, if the method is ever called, +Google Mock will perform its default action to allow the test program +to continue. If you are not happy with the default action taken by +Google Mock, you can override it using `DefaultValue::Set()` +(described later in this document) or `ON_CALL()`. + +Please note that once you expressed interest in a particular mock +method (via `EXPECT_CALL()`), all invocations to it must match some +expectation. If this function is called but the arguments don't match +any `EXPECT_CALL()` statement, it will be an error. + +## Disallowing Unexpected Calls ## + +If a mock method shouldn't be called at all, explicitly say so: + +``` +using ::testing::_; +... + EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +If some calls to the method are allowed, but the rest are not, just +list all the expected calls: + +``` +using ::testing::AnyNumber; +using ::testing::Gt; +... + EXPECT_CALL(foo, Bar(5)); + EXPECT_CALL(foo, Bar(Gt(10))) + .Times(AnyNumber()); +``` + +A call to `foo.Bar()` that doesn't match any of the `EXPECT_CALL()` +statements will be an error. + +## Expecting Ordered Calls ## + +Although an `EXPECT_CALL()` statement defined earlier takes precedence +when Google Mock tries to match a function call with an expectation, +by default calls don't have to happen in the order `EXPECT_CALL()` +statements are written. For example, if the arguments match the +matchers in the third `EXPECT_CALL()`, but not those in the first two, +then the third expectation will be used. + +If you would rather have all calls occur in the order of the +expectations, put the `EXPECT_CALL()` statements in a block where you +define a variable of type `InSequence`: + +``` + using ::testing::_; + using ::testing::InSequence; + + { + InSequence s; + + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(bar, DoThat(_)) + .Times(2); + EXPECT_CALL(foo, DoThis(6)); + } +``` + +In this example, we expect a call to `foo.DoThis(5)`, followed by two +calls to `bar.DoThat()` where the argument can be anything, which are +in turn followed by a call to `foo.DoThis(6)`. If a call occurred +out-of-order, Google Mock will report an error. + +## Expecting Partially Ordered Calls ## + +Sometimes requiring everything to occur in a predetermined order can +lead to brittle tests. For example, we may care about `A` occurring +before both `B` and `C`, but aren't interested in the relative order +of `B` and `C`. In this case, the test should reflect our real intent, +instead of being overly constraining. + +Google Mock allows you to impose an arbitrary DAG (directed acyclic +graph) on the calls. One way to express the DAG is to use the +[After](http://code.google.com/p/googlemock/wiki/V1_6_CheatSheet#The_After_Clause) clause of `EXPECT_CALL`. + +Another way is via the `InSequence()` clause (not the same as the +`InSequence` class), which we borrowed from jMock 2. It's less +flexible than `After()`, but more convenient when you have long chains +of sequential calls, as it doesn't require you to come up with +different names for the expectations in the chains. Here's how it +works: + +If we view `EXPECT_CALL()` statements as nodes in a graph, and add an +edge from node A to node B wherever A must occur before B, we can get +a DAG. We use the term "sequence" to mean a directed path in this +DAG. Now, if we decompose the DAG into sequences, we just need to know +which sequences each `EXPECT_CALL()` belongs to in order to be able to +reconstruct the orginal DAG. + +So, to specify the partial order on the expectations we need to do two +things: first to define some `Sequence` objects, and then for each +`EXPECT_CALL()` say which `Sequence` objects it is part +of. Expectations in the same sequence must occur in the order they are +written. For example, + +``` + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(foo, A()) + .InSequence(s1, s2); + EXPECT_CALL(bar, B()) + .InSequence(s1); + EXPECT_CALL(bar, C()) + .InSequence(s2); + EXPECT_CALL(foo, D()) + .InSequence(s2); +``` + +specifies the following DAG (where `s1` is `A -> B`, and `s2` is `A -> +C -> D`): + +``` + +---> B + | + A ---| + | + +---> C ---> D +``` + +This means that A must occur before B and C, and C must occur before +D. There's no restriction about the order other than these. + +## Controlling When an Expectation Retires ## + +When a mock method is called, Google Mock only consider expectations +that are still active. An expectation is active when created, and +becomes inactive (aka _retires_) when a call that has to occur later +has occurred. For example, in + +``` + using ::testing::_; + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #1 + .Times(AnyNumber()) + .InSequence(s1, s2); + EXPECT_CALL(log, Log(WARNING, _, "Data set is empty.")) // #2 + .InSequence(s1); + EXPECT_CALL(log, Log(WARNING, _, "User not found.")) // #3 + .InSequence(s2); +``` + +as soon as either #2 or #3 is matched, #1 will retire. If a warning +`"File too large."` is logged after this, it will be an error. + +Note that an expectation doesn't retire automatically when it's +saturated. For example, + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")); // #2 +``` + +says that there will be exactly one warning with the message `"File +too large."`. If the second warning contains this message too, #2 will +match again and result in an upper-bound-violated error. + +If this is not what you want, you can ask an expectation to retire as +soon as it becomes saturated: + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #2 + .RetiresOnSaturation(); +``` + +Here #2 can be used only once, so if you have two warnings with the +message `"File too large."`, the first will match #2 and the second +will match #1 - there will be no error. + +# Using Actions # + +## Returning References from Mock Methods ## + +If a mock function's return type is a reference, you need to use +`ReturnRef()` instead of `Return()` to return a result: + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + public: + MOCK_METHOD0(GetBar, Bar&()); +}; +... + + MockFoo foo; + Bar bar; + EXPECT_CALL(foo, GetBar()) + .WillOnce(ReturnRef(bar)); +``` + +## Returning Live Values from Mock Methods ## + +The `Return(x)` action saves a copy of `x` when the action is +_created_, and always returns the same value whenever it's +executed. Sometimes you may want to instead return the _live_ value of +`x` (i.e. its value at the time when the action is _executed_.). + +If the mock function's return type is a reference, you can do it using +`ReturnRef(x)`, as shown in the previous recipe ("Returning References +from Mock Methods"). However, Google Mock doesn't let you use +`ReturnRef()` in a mock function whose return type is not a reference, +as doing that usually indicates a user error. So, what shall you do? + +You may be tempted to try `ByRef()`: + +``` +using testing::ByRef; +using testing::Return; + +class MockFoo : public Foo { + public: + MOCK_METHOD0(GetValue, int()); +}; +... + int x = 0; + MockFoo foo; + EXPECT_CALL(foo, GetValue()) + .WillRepeatedly(Return(ByRef(x))); + x = 42; + EXPECT_EQ(42, foo.GetValue()); +``` + +Unfortunately, it doesn't work here. The above code will fail with error: + +``` +Value of: foo.GetValue() + Actual: 0 +Expected: 42 +``` + +The reason is that `Return(value)` converts `value` to the actual +return type of the mock function at the time when the action is +_created_, not when it is _executed_. (This behavior was chosen for +the action to be safe when `value` is a proxy object that references +some temporary objects.) As a result, `ByRef(x)` is converted to an +`int` value (instead of a `const int&`) when the expectation is set, +and `Return(ByRef(x))` will always return 0. + +`ReturnPointee(pointer)` was provided to solve this problem +specifically. It returns the value pointed to by `pointer` at the time +the action is _executed_: + +``` +using testing::ReturnPointee; +... + int x = 0; + MockFoo foo; + EXPECT_CALL(foo, GetValue()) + .WillRepeatedly(ReturnPointee(&x)); // Note the & here. + x = 42; + EXPECT_EQ(42, foo.GetValue()); // This will succeed now. +``` + +## Combining Actions ## + +Want to do more than one thing when a function is called? That's +fine. `DoAll()` allow you to do sequence of actions every time. Only +the return value of the last action in the sequence will be used. + +``` +using ::testing::DoAll; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Bar, bool(int n)); +}; +... + + EXPECT_CALL(foo, Bar(_)) + .WillOnce(DoAll(action_1, + action_2, + ... + action_n)); +``` + +## Mocking Side Effects ## + +Sometimes a method exhibits its effect not via returning a value but +via side effects. For example, it may change some global state or +modify an output argument. To mock side effects, in general you can +define your own action by implementing `::testing::ActionInterface`. + +If all you need to do is to change an output argument, the built-in +`SetArgPointee()` action is convenient: + +``` +using ::testing::SetArgPointee; + +class MockMutator : public Mutator { + public: + MOCK_METHOD2(Mutate, void(bool mutate, int* value)); + ... +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, Mutate(true, _)) + .WillOnce(SetArgPointee<1>(5)); +``` + +In this example, when `mutator.Mutate()` is called, we will assign 5 +to the `int` variable pointed to by argument #1 +(0-based). + +`SetArgPointee()` conveniently makes an internal copy of the +value you pass to it, removing the need to keep the value in scope and +alive. The implication however is that the value must have a copy +constructor and assignment operator. + +If the mock method also needs to return a value as well, you can chain +`SetArgPointee()` with `Return()` using `DoAll()`: + +``` +using ::testing::_; +using ::testing::Return; +using ::testing::SetArgPointee; + +class MockMutator : public Mutator { + public: + ... + MOCK_METHOD1(MutateInt, bool(int* value)); +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, MutateInt(_)) + .WillOnce(DoAll(SetArgPointee<0>(5), + Return(true))); +``` + +If the output argument is an array, use the +`SetArrayArgument(first, last)` action instead. It copies the +elements in source range `[first, last)` to the array pointed to by +the `N`-th (0-based) argument: + +``` +using ::testing::NotNull; +using ::testing::SetArrayArgument; + +class MockArrayMutator : public ArrayMutator { + public: + MOCK_METHOD2(Mutate, void(int* values, int num_values)); + ... +}; +... + + MockArrayMutator mutator; + int values[5] = { 1, 2, 3, 4, 5 }; + EXPECT_CALL(mutator, Mutate(NotNull(), 5)) + .WillOnce(SetArrayArgument<0>(values, values + 5)); +``` + +This also works when the argument is an output iterator: + +``` +using ::testing::_; +using ::testing::SeArrayArgument; + +class MockRolodex : public Rolodex { + public: + MOCK_METHOD1(GetNames, void(std::back_insert_iterator >)); + ... +}; +... + + MockRolodex rolodex; + vector names; + names.push_back("George"); + names.push_back("John"); + names.push_back("Thomas"); + EXPECT_CALL(rolodex, GetNames(_)) + .WillOnce(SetArrayArgument<0>(names.begin(), names.end())); +``` + +## Changing a Mock Object's Behavior Based on the State ## + +If you expect a call to change the behavior of a mock object, you can use `::testing::InSequence` to specify different behaviors before and after the call: + +``` +using ::testing::InSequence; +using ::testing::Return; + +... + { + InSequence seq; + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(true)); + EXPECT_CALL(my_mock, Flush()); + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(false)); + } + my_mock.FlushIfDirty(); +``` + +This makes `my_mock.IsDirty()` return `true` before `my_mock.Flush()` is called and return `false` afterwards. + +If the behavior change is more complex, you can store the effects in a variable and make a mock method get its return value from that variable: + +``` +using ::testing::_; +using ::testing::SaveArg; +using ::testing::Return; + +ACTION_P(ReturnPointee, p) { return *p; } +... + int previous_value = 0; + EXPECT_CALL(my_mock, GetPrevValue()) + .WillRepeatedly(ReturnPointee(&previous_value)); + EXPECT_CALL(my_mock, UpdateValue(_)) + .WillRepeatedly(SaveArg<0>(&previous_value)); + my_mock.DoSomethingToUpdateValue(); +``` + +Here `my_mock.GetPrevValue()` will always return the argument of the last `UpdateValue()` call. + +## Setting the Default Value for a Return Type ## + +If a mock method's return type is a built-in C++ type or pointer, by +default it will return 0 when invoked. You only need to specify an +action if this default value doesn't work for you. + +Sometimes, you may want to change this default value, or you may want +to specify a default value for types Google Mock doesn't know +about. You can do this using the `::testing::DefaultValue` class +template: + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD0(CalculateBar, Bar()); +}; +... + + Bar default_bar; + // Sets the default return value for type Bar. + DefaultValue::Set(default_bar); + + MockFoo foo; + + // We don't need to specify an action here, as the default + // return value works for us. + EXPECT_CALL(foo, CalculateBar()); + + foo.CalculateBar(); // This should return default_bar. + + // Unsets the default return value. + DefaultValue::Clear(); +``` + +Please note that changing the default value for a type can make you +tests hard to understand. We recommend you to use this feature +judiciously. For example, you may want to make sure the `Set()` and +`Clear()` calls are right next to the code that uses your mock. + +## Setting the Default Actions for a Mock Method ## + +You've learned how to change the default value of a given +type. However, this may be too coarse for your purpose: perhaps you +have two mock methods with the same return type and you want them to +have different behaviors. The `ON_CALL()` macro allows you to +customize your mock's behavior at the method level: + +``` +using ::testing::_; +using ::testing::AnyNumber; +using ::testing::Gt; +using ::testing::Return; +... + ON_CALL(foo, Sign(_)) + .WillByDefault(Return(-1)); + ON_CALL(foo, Sign(0)) + .WillByDefault(Return(0)); + ON_CALL(foo, Sign(Gt(0))) + .WillByDefault(Return(1)); + + EXPECT_CALL(foo, Sign(_)) + .Times(AnyNumber()); + + foo.Sign(5); // This should return 1. + foo.Sign(-9); // This should return -1. + foo.Sign(0); // This should return 0. +``` + +As you may have guessed, when there are more than one `ON_CALL()` +statements, the news order take precedence over the older ones. In +other words, the **last** one that matches the function arguments will +be used. This matching order allows you to set up the common behavior +in a mock object's constructor or the test fixture's set-up phase and +specialize the mock's behavior later. + +## Using Functions/Methods/Functors as Actions ## + +If the built-in actions don't suit you, you can easily use an existing +function, method, or functor as an action: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(Sum, int(int x, int y)); + MOCK_METHOD1(ComplexJob, bool(int x)); +}; + +int CalculateSum(int x, int y) { return x + y; } + +class Helper { + public: + bool ComplexJob(int x); +}; +... + + MockFoo foo; + Helper helper; + EXPECT_CALL(foo, Sum(_, _)) + .WillOnce(Invoke(CalculateSum)); + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(Invoke(&helper, &Helper::ComplexJob)); + + foo.Sum(5, 6); // Invokes CalculateSum(5, 6). + foo.ComplexJob(10); // Invokes helper.ComplexJob(10); +``` + +The only requirement is that the type of the function, etc must be +_compatible_ with the signature of the mock function, meaning that the +latter's arguments can be implicitly converted to the corresponding +arguments of the former, and the former's return type can be +implicitly converted to that of the latter. So, you can invoke +something whose type is _not_ exactly the same as the mock function, +as long as it's safe to do so - nice, huh? + +## Invoking a Function/Method/Functor Without Arguments ## + +`Invoke()` is very useful for doing actions that are more complex. It +passes the mock function's arguments to the function or functor being +invoked such that the callee has the full context of the call to work +with. If the invoked function is not interested in some or all of the +arguments, it can simply ignore them. + +Yet, a common pattern is that a test author wants to invoke a function +without the arguments of the mock function. `Invoke()` allows her to +do that using a wrapper function that throws away the arguments before +invoking an underlining nullary function. Needless to say, this can be +tedious and obscures the intent of the test. + +`InvokeWithoutArgs()` solves this problem. It's like `Invoke()` except +that it doesn't pass the mock function's arguments to the +callee. Here's an example: + +``` +using ::testing::_; +using ::testing::InvokeWithoutArgs; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(ComplexJob, bool(int n)); +}; + +bool Job1() { ... } +... + + MockFoo foo; + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(InvokeWithoutArgs(Job1)); + + foo.ComplexJob(10); // Invokes Job1(). +``` + +## Invoking an Argument of the Mock Function ## + +Sometimes a mock function will receive a function pointer or a functor +(in other words, a "callable") as an argument, e.g. + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, bool(int n, bool (*fp)(int))); +}; +``` + +and you may want to invoke this callable argument: + +``` +using ::testing::_; +... + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(...); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +Arghh, you need to refer to a mock function argument but C++ has no +lambda (yet), so you have to define your own action. :-( Or do you +really? + +Well, Google Mock has an action to solve _exactly_ this problem: + +``` + InvokeArgument(arg_1, arg_2, ..., arg_m) +``` + +will invoke the `N`-th (0-based) argument the mock function receives, +with `arg_1`, `arg_2`, ..., and `arg_m`. No matter if the argument is +a function pointer or a functor, Google Mock handles them both. + +With that, you could write: + +``` +using ::testing::_; +using ::testing::InvokeArgument; +... + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(InvokeArgument<1>(5)); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +What if the callable takes an argument by reference? No problem - just +wrap it inside `ByRef()`: + +``` +... + MOCK_METHOD1(Bar, bool(bool (*fp)(int, const Helper&))); +... +using ::testing::_; +using ::testing::ByRef; +using ::testing::InvokeArgument; +... + + MockFoo foo; + Helper helper; + ... + EXPECT_CALL(foo, Bar(_)) + .WillOnce(InvokeArgument<0>(5, ByRef(helper))); + // ByRef(helper) guarantees that a reference to helper, not a copy of it, + // will be passed to the callable. +``` + +What if the callable takes an argument by reference and we do **not** +wrap the argument in `ByRef()`? Then `InvokeArgument()` will _make a +copy_ of the argument, and pass a _reference to the copy_, instead of +a reference to the original value, to the callable. This is especially +handy when the argument is a temporary value: + +``` +... + MOCK_METHOD1(DoThat, bool(bool (*f)(const double& x, const string& s))); +... +using ::testing::_; +using ::testing::InvokeArgument; +... + + MockFoo foo; + ... + EXPECT_CALL(foo, DoThat(_)) + .WillOnce(InvokeArgument<0>(5.0, string("Hi"))); + // Will execute (*f)(5.0, string("Hi")), where f is the function pointer + // DoThat() receives. Note that the values 5.0 and string("Hi") are + // temporary and dead once the EXPECT_CALL() statement finishes. Yet + // it's fine to perform this action later, since a copy of the values + // are kept inside the InvokeArgument action. +``` + +## Ignoring an Action's Result ## + +Sometimes you have an action that returns _something_, but you need an +action that returns `void` (perhaps you want to use it in a mock +function that returns `void`, or perhaps it needs to be used in +`DoAll()` and it's not the last in the list). `IgnoreResult()` lets +you do that. For example: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Return; + +int Process(const MyData& data); +string DoSomething(); + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Abc, void(const MyData& data)); + MOCK_METHOD0(Xyz, bool()); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, Abc(_)) + // .WillOnce(Invoke(Process)); + // The above line won't compile as Process() returns int but Abc() needs + // to return void. + .WillOnce(IgnoreResult(Invoke(Process))); + + EXPECT_CALL(foo, Xyz()) + .WillOnce(DoAll(IgnoreResult(Invoke(DoSomething)), + // Ignores the string DoSomething() returns. + Return(true))); +``` + +Note that you **cannot** use `IgnoreResult()` on an action that already +returns `void`. Doing so will lead to ugly compiler errors. + +## Selecting an Action's Arguments ## + +Say you have a mock function `Foo()` that takes seven arguments, and +you have a custom action that you want to invoke when `Foo()` is +called. Trouble is, the custom action only wants three arguments: + +``` +using ::testing::_; +using ::testing::Invoke; +... + MOCK_METHOD7(Foo, bool(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight)); +... + +bool IsVisibleInQuadrant1(bool visible, int x, int y) { + return visible && x >= 0 && y >= 0; +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(IsVisibleInQuadrant1)); // Uh, won't compile. :-( +``` + +To please the compiler God, you can to define an "adaptor" that has +the same signature as `Foo()` and calls the custom action with the +right arguments: + +``` +using ::testing::_; +using ::testing::Invoke; + +bool MyIsVisibleInQuadrant1(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight) { + return IsVisibleInQuadrant1(visible, x, y); +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(MyIsVisibleInQuadrant1)); // Now it works. +``` + +But isn't this awkward? + +Google Mock provides a generic _action adaptor_, so you can spend your +time minding more important business than writing your own +adaptors. Here's the syntax: + +``` + WithArgs(action) +``` + +creates an action that passes the arguments of the mock function at +the given indices (0-based) to the inner `action` and performs +it. Using `WithArgs`, our original example can be written as: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::WithArgs; +... + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(WithArgs<0, 2, 3>(Invoke(IsVisibleInQuadrant1))); + // No need to define your own adaptor. +``` + +For better readability, Google Mock also gives you: + + * `WithoutArgs(action)` when the inner `action` takes _no_ argument, and + * `WithArg(action)` (no `s` after `Arg`) when the inner `action` takes _one_ argument. + +As you may have realized, `InvokeWithoutArgs(...)` is just syntactic +sugar for `WithoutArgs(Inovke(...))`. + +Here are more tips: + + * The inner action used in `WithArgs` and friends does not have to be `Invoke()` -- it can be anything. + * You can repeat an argument in the argument list if necessary, e.g. `WithArgs<2, 3, 3, 5>(...)`. + * You can change the order of the arguments, e.g. `WithArgs<3, 2, 1>(...)`. + * The types of the selected arguments do _not_ have to match the signature of the inner action exactly. It works as long as they can be implicitly converted to the corresponding arguments of the inner action. For example, if the 4-th argument of the mock function is an `int` and `my_action` takes a `double`, `WithArg<4>(my_action)` will work. + +## Ignoring Arguments in Action Functions ## + +The selecting-an-action's-arguments recipe showed us one way to make a +mock function and an action with incompatible argument lists fit +together. The downside is that wrapping the action in +`WithArgs<...>()` can get tedious for people writing the tests. + +If you are defining a function, method, or functor to be used with +`Invoke*()`, and you are not interested in some of its arguments, an +alternative to `WithArgs` is to declare the uninteresting arguments as +`Unused`. This makes the definition less cluttered and less fragile in +case the types of the uninteresting arguments change. It could also +increase the chance the action function can be reused. For example, +given + +``` + MOCK_METHOD3(Foo, double(const string& label, double x, double y)); + MOCK_METHOD3(Bar, double(int index, double x, double y)); +``` + +instead of + +``` +using ::testing::_; +using ::testing::Invoke; + +double DistanceToOriginWithLabel(const string& label, double x, double y) { + return sqrt(x*x + y*y); +} + +double DistanceToOriginWithIndex(int index, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOriginWithLabel)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOriginWithIndex)); +``` + +you could write + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Unused; + +double DistanceToOrigin(Unused, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOrigin)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOrigin)); +``` + +## Sharing Actions ## + +Just like matchers, a Google Mock action object consists of a pointer +to a ref-counted implementation object. Therefore copying actions is +also allowed and very efficient. When the last action that references +the implementation object dies, the implementation object will be +deleted. + +If you have some complex action that you want to use again and again, +you may not have to build it from scratch everytime. If the action +doesn't have an internal state (i.e. if it always does the same thing +no matter how many times it has been called), you can assign it to an +action variable and use that variable repeatedly. For example: + +``` + Action set_flag = DoAll(SetArgPointee<0>(5), + Return(true)); + ... use set_flag in .WillOnce() and .WillRepeatedly() ... +``` + +However, if the action has its own state, you may be surprised if you +share the action object. Suppose you have an action factory +`IncrementCounter(init)` which creates an action that increments and +returns a counter whose initial value is `init`, using two actions +created from the same expression and using a shared action will +exihibit different behaviors. Example: + +``` + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(IncrementCounter(0)); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(IncrementCounter(0)); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 1 - Blah() uses a different + // counter than Bar()'s. +``` + +versus + +``` + Action increment = IncrementCounter(0); + + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(increment); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(increment); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 3 - the counter is shared. +``` + +# Misc Recipes on Using Google Mock # + +## Making the Compilation Faster ## + +Believe it or not, the _vast majority_ of the time spent on compiling +a mock class is in generating its constructor and destructor, as they +perform non-trivial tasks (e.g. verification of the +expectations). What's more, mock methods with different signatures +have different types and thus their constructors/destructors need to +be generated by the compiler separately. As a result, if you mock many +different types of methods, compiling your mock class can get really +slow. + +If you are experiencing slow compilation, you can move the definition +of your mock class' constructor and destructor out of the class body +and into a `.cpp` file. This way, even if you `#include` your mock +class in N files, the compiler only needs to generate its constructor +and destructor once, resulting in a much faster compilation. + +Let's illustrate the idea using an example. Here's the definition of a +mock class before applying this recipe: + +``` +// File mock_foo.h. +... +class MockFoo : public Foo { + public: + // Since we don't declare the constructor or the destructor, + // the compiler will generate them in every translation unit + // where this mock class is used. + + MOCK_METHOD0(DoThis, int()); + MOCK_METHOD1(DoThat, bool(const char* str)); + ... more mock methods ... +}; +``` + +After the change, it would look like: + +``` +// File mock_foo.h. +... +class MockFoo : public Foo { + public: + // The constructor and destructor are declared, but not defined, here. + MockFoo(); + virtual ~MockFoo(); + + MOCK_METHOD0(DoThis, int()); + MOCK_METHOD1(DoThat, bool(const char* str)); + ... more mock methods ... +}; +``` +and +``` +// File mock_foo.cpp. +#include "path/to/mock_foo.h" + +// The definitions may appear trivial, but the functions actually do a +// lot of things through the constructors/destructors of the member +// variables used to implement the mock methods. +MockFoo::MockFoo() {} +MockFoo::~MockFoo() {} +``` + +## Forcing a Verification ## + +When it's being destoyed, your friendly mock object will automatically +verify that all expectations on it have been satisfied, and will +generate [Google Test](http://code.google.com/p/googletest/) failures +if not. This is convenient as it leaves you with one less thing to +worry about. That is, unless you are not sure if your mock object will +be destoyed. + +How could it be that your mock object won't eventually be destroyed? +Well, it might be created on the heap and owned by the code you are +testing. Suppose there's a bug in that code and it doesn't delete the +mock object properly - you could end up with a passing test when +there's actually a bug. + +Using a heap checker is a good idea and can alleviate the concern, but +its implementation may not be 100% reliable. So, sometimes you do want +to _force_ Google Mock to verify a mock object before it is +(hopefully) destructed. You can do this with +`Mock::VerifyAndClearExpectations(&mock_object)`: + +``` +TEST(MyServerTest, ProcessesRequest) { + using ::testing::Mock; + + MockFoo* const foo = new MockFoo; + EXPECT_CALL(*foo, ...)...; + // ... other expectations ... + + // server now owns foo. + MyServer server(foo); + server.ProcessRequest(...); + + // In case that server's destructor will forget to delete foo, + // this will verify the expectations anyway. + Mock::VerifyAndClearExpectations(foo); +} // server is destroyed when it goes out of scope here. +``` + +**Tip:** The `Mock::VerifyAndClearExpectations()` function returns a +`bool` to indicate whether the verification was successful (`true` for +yes), so you can wrap that function call inside a `ASSERT_TRUE()` if +there is no point going further when the verification has failed. + +## Using Check Points ## + +Sometimes you may want to "reset" a mock object at various check +points in your test: at each check point, you verify that all existing +expectations on the mock object have been satisfied, and then you set +some new expectations on it as if it's newly created. This allows you +to work with a mock object in "phases" whose sizes are each +manageable. + +One such scenario is that in your test's `SetUp()` function, you may +want to put the object you are testing into a certain state, with the +help from a mock object. Once in the desired state, you want to clear +all expectations on the mock, such that in the `TEST_F` body you can +set fresh expectations on it. + +As you may have figured out, the `Mock::VerifyAndClearExpectations()` +function we saw in the previous recipe can help you here. Or, if you +are using `ON_CALL()` to set default actions on the mock object and +want to clear the default actions as well, use +`Mock::VerifyAndClear(&mock_object)` instead. This function does what +`Mock::VerifyAndClearExpectations(&mock_object)` does and returns the +same `bool`, **plus** it clears the `ON_CALL()` statements on +`mock_object` too. + +Another trick you can use to achieve the same effect is to put the +expectations in sequences and insert calls to a dummy "check-point" +function at specific places. Then you can verify that the mock +function calls do happen at the right time. For example, if you are +exercising code: + +``` +Foo(1); +Foo(2); +Foo(3); +``` + +and want to verify that `Foo(1)` and `Foo(3)` both invoke +`mock.Bar("a")`, but `Foo(2)` doesn't invoke anything. You can write: + +``` +using ::testing::MockFunction; + +TEST(FooTest, InvokesBarCorrectly) { + MyMock mock; + // Class MockFunction has exactly one mock method. It is named + // Call() and has type F. + MockFunction check; + { + InSequence s; + + EXPECT_CALL(mock, Bar("a")); + EXPECT_CALL(check, Call("1")); + EXPECT_CALL(check, Call("2")); + EXPECT_CALL(mock, Bar("a")); + } + Foo(1); + check.Call("1"); + Foo(2); + check.Call("2"); + Foo(3); +} +``` + +The expectation spec says that the first `Bar("a")` must happen before +check point "1", the second `Bar("a")` must happen after check point "2", +and nothing should happen between the two check points. The explicit +check points make it easy to tell which `Bar("a")` is called by which +call to `Foo()`. + +## Mocking Destructors ## + +Sometimes you want to make sure a mock object is destructed at the +right time, e.g. after `bar->A()` is called but before `bar->B()` is +called. We already know that you can specify constraints on the order +of mock function calls, so all we need to do is to mock the destructor +of the mock function. + +This sounds simple, except for one problem: a destructor is a special +function with special syntax and special semantics, and the +`MOCK_METHOD0` macro doesn't work for it: + +``` + MOCK_METHOD0(~MockFoo, void()); // Won't compile! +``` + +The good news is that you can use a simple pattern to achieve the same +effect. First, add a mock function `Die()` to your mock class and call +it in the destructor, like this: + +``` +class MockFoo : public Foo { + ... + // Add the following two lines to the mock class. + MOCK_METHOD0(Die, void()); + virtual ~MockFoo() { Die(); } +}; +``` + +(If the name `Die()` clashes with an existing symbol, choose another +name.) Now, we have translated the problem of testing when a `MockFoo` +object dies to testing when its `Die()` method is called: + +``` + MockFoo* foo = new MockFoo; + MockBar* bar = new MockBar; + ... + { + InSequence s; + + // Expects *foo to die after bar->A() and before bar->B(). + EXPECT_CALL(*bar, A()); + EXPECT_CALL(*foo, Die()); + EXPECT_CALL(*bar, B()); + } +``` + +And that's that. + +## Using Google Mock and Threads ## + +**IMPORTANT NOTE:** What we describe in this recipe is **ONLY** true on +platforms where Google Mock is thread-safe. Currently these are only +platforms that support the pthreads library (this includes Linux and Mac). +To make it thread-safe on other platforms we only need to implement +some synchronization operations in `"gtest/internal/gtest-port.h"`. + +In a **unit** test, it's best if you could isolate and test a piece of +code in a single-threaded context. That avoids race conditions and +dead locks, and makes debugging your test much easier. + +Yet many programs are multi-threaded, and sometimes to test something +we need to pound on it from more than one thread. Google Mock works +for this purpose too. + +Remember the steps for using a mock: + + 1. Create a mock object `foo`. + 1. Set its default actions and expectations using `ON_CALL()` and `EXPECT_CALL()`. + 1. The code under test calls methods of `foo`. + 1. Optionally, verify and reset the mock. + 1. Destroy the mock yourself, or let the code under test destroy it. The destructor will automatically verify it. + +If you follow the following simple rules, your mocks and threads can +live happily togeter: + + * Execute your _test code_ (as opposed to the code being tested) in _one_ thread. This makes your test easy to follow. + * Obviously, you can do step #1 without locking. + * When doing step #2 and #5, make sure no other thread is accessing `foo`. Obvious too, huh? + * #3 and #4 can be done either in one thread or in multiple threads - anyway you want. Google Mock takes care of the locking, so you don't have to do any - unless required by your test logic. + +If you violate the rules (for example, if you set expectations on a +mock while another thread is calling its methods), you get undefined +behavior. That's not fun, so don't do it. + +Google Mock guarantees that the action for a mock function is done in +the same thread that called the mock function. For example, in + +``` + EXPECT_CALL(mock, Foo(1)) + .WillOnce(action1); + EXPECT_CALL(mock, Foo(2)) + .WillOnce(action2); +``` + +if `Foo(1)` is called in thread 1 and `Foo(2)` is called in thread 2, +Google Mock will execute `action1` in thread 1 and `action2` in thread +2. + +Google Mock does _not_ impose a sequence on actions performed in +different threads (doing so may create deadlocks as the actions may +need to cooperate). This means that the execution of `action1` and +`action2` in the above example _may_ interleave. If this is a problem, +you should add proper synchronization logic to `action1` and `action2` +to make the test thread-safe. + + +Also, remember that `DefaultValue` is a global resource that +potentially affects _all_ living mock objects in your +program. Naturally, you won't want to mess with it from multiple +threads or when there still are mocks in action. + +## Controlling How Much Information Google Mock Prints ## + +When Google Mock sees something that has the potential of being an +error (e.g. a mock function with no expectation is called, a.k.a. an +uninteresting call, which is allowed but perhaps you forgot to +explicitly ban the call), it prints some warning messages, including +the arguments of the function and the return value. Hopefully this +will remind you to take a look and see if there is indeed a problem. + +Sometimes you are confident that your tests are correct and may not +appreciate such friendly messages. Some other times, you are debugging +your tests or learning about the behavior of the code you are testing, +and wish you could observe every mock call that happens (including +argument values and the return value). Clearly, one size doesn't fit +all. + +You can control how much Google Mock tells you using the +`--gmock_verbose=LEVEL` command-line flag, where `LEVEL` is a string +with three possible values: + + * `info`: Google Mock will print all informational messages, warnings, and errors (most verbose). At this setting, Google Mock will also log any calls to the `ON_CALL/EXPECT_CALL` macros. + * `warning`: Google Mock will print both warnings and errors (less verbose). This is the default. + * `error`: Google Mock will print errors only (least verbose). + +Alternatively, you can adjust the value of that flag from within your +tests like so: + +``` + ::testing::FLAGS_gmock_verbose = "error"; +``` + +Now, judiciously use the right flag to enable Google Mock serve you better! + +## Running Tests in Emacs ## + +If you build and run your tests in Emacs, the source file locations of +Google Mock and [Google Test](http://code.google.com/p/googletest/) +errors will be highlighted. Just press `` on one of them and +you'll be taken to the offending line. Or, you can just type `C-x `` +to jump to the next error. + +To make it even easier, you can add the following lines to your +`~/.emacs` file: + +``` +(global-set-key "\M-m" 'compile) ; m is for make +(global-set-key [M-down] 'next-error) +(global-set-key [M-up] '(lambda () (interactive) (next-error -1))) +``` + +Then you can type `M-m` to start a build, or `M-up`/`M-down` to move +back and forth between errors. + +## Fusing Google Mock Source Files ## + +Google Mock's implementation consists of dozens of files (excluding +its own tests). Sometimes you may want them to be packaged up in +fewer files instead, such that you can easily copy them to a new +machine and start hacking there. For this we provide an experimental +Python script `fuse_gmock_files.py` in the `scripts/` directory +(starting with release 1.2.0). Assuming you have Python 2.4 or above +installed on your machine, just go to that directory and run +``` +python fuse_gmock_files.py OUTPUT_DIR +``` + +and you should see an `OUTPUT_DIR` directory being created with files +`gtest/gtest.h`, `gmock/gmock.h`, and `gmock-gtest-all.cc` in it. +These three files contain everything you need to use Google Mock (and +Google Test). Just copy them to anywhere you want and you are ready +to write tests and use mocks. You can use the +[scrpts/test/Makefile](http://code.google.com/p/googlemock/source/browse/trunk/scripts/test/Makefile) file as an example on how to compile your tests +against them. + +# Extending Google Mock # + +## Writing New Matchers Quickly ## + +The `MATCHER*` family of macros can be used to define custom matchers +easily. The syntax: + +``` +MATCHER(name, description_string_expression) { statements; } +``` + +will define a matcher with the given name that executes the +statements, which must return a `bool` to indicate if the match +succeeds. Inside the statements, you can refer to the value being +matched by `arg`, and refer to its type by `arg_type`. + +The description string is a `string`-typed expression that documents +what the matcher does, and is used to generate the failure message +when the match fails. It can (and should) reference the special +`bool` variable `negation`, and should evaluate to the description of +the matcher when `negation` is `false`, or that of the matcher's +negation when `negation` is `true`. + +For convenience, we allow the description string to be empty (`""`), +in which case Google Mock will use the sequence of words in the +matcher name as the description. + +For example: +``` +MATCHER(IsDivisibleBy7, "") { return (arg % 7) == 0; } +``` +allows you to write +``` + // Expects mock_foo.Bar(n) to be called where n is divisible by 7. + EXPECT_CALL(mock_foo, Bar(IsDivisibleBy7())); +``` +or, +``` +using ::testing::Not; +... + EXPECT_THAT(some_expression, IsDivisibleBy7()); + EXPECT_THAT(some_other_expression, Not(IsDivisibleBy7())); +``` +If the above assertions fail, they will print something like: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 +... + Value of: some_other_expression + Expected: not (is divisible by 7) + Actual: 21 +``` +where the descriptions `"is divisible by 7"` and `"not (is divisible +by 7)"` are automatically calculated from the matcher name +`IsDivisibleBy7`. + +As you may have noticed, the auto-generated descriptions (especially +those for the negation) may not be so great. You can always override +them with a string expression of your own: +``` +MATCHER(IsDivisibleBy7, std::string(negation ? "isn't" : "is") + + " divisible by 7") { + return (arg % 7) == 0; +} +``` + +Optionally, you can stream additional information to a hidden argument +named `result_listener` to explain the match result. For example, a +better definition of `IsDivisibleBy7` is: +``` +MATCHER(IsDivisibleBy7, "") { + if ((arg % 7) == 0) + return true; + + *result_listener << "the remainder is " << (arg % 7); + return false; +} +``` + +With this definition, the above assertion will give a better message: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 (the remainder is 6) +``` + +You should let `MatchAndExplain()` print _any additional information_ +that can help a user understand the match result. Note that it should +explain why the match succeeds in case of a success (unless it's +obvious) - this is useful when the matcher is used inside +`Not()`. There is no need to print the argument value itself, as +Google Mock already prints it for you. + +**Notes:** + + 1. The type of the value being matched (`arg_type`) is determined by the context in which you use the matcher and is supplied to you by the compiler, so you don't need to worry about declaring it (nor can you). This allows the matcher to be polymorphic. For example, `IsDivisibleBy7()` can be used to match any type where the value of `(arg % 7) == 0` can be implicitly converted to a `bool`. In the `Bar(IsDivisibleBy7())` example above, if method `Bar()` takes an `int`, `arg_type` will be `int`; if it takes an `unsigned long`, `arg_type` will be `unsigned long`; and so on. + 1. Google Mock doesn't guarantee when or how many times a matcher will be invoked. Therefore the matcher logic must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). This requirement must be satisfied no matter how you define the matcher (e.g. using one of the methods described in the following recipes). In particular, a matcher can never call a mock function, as that will affect the state of the mock object and Google Mock. + +## Writing New Parameterized Matchers Quickly ## + +Sometimes you'll want to define a matcher that has parameters. For that you +can use the macro: +``` +MATCHER_P(name, param_name, description_string) { statements; } +``` +where the description string can be either `""` or a string expression +that references `negation` and `param_name`. + +For example: +``` +MATCHER_P(HasAbsoluteValue, value, "") { return abs(arg) == value; } +``` +will allow you to write: +``` + EXPECT_THAT(Blah("a"), HasAbsoluteValue(n)); +``` +which may lead to this message (assuming `n` is 10): +``` + Value of: Blah("a") + Expected: has absolute value 10 + Actual: -9 +``` + +Note that both the matcher description and its parameter are +printed, making the message human-friendly. + +In the matcher definition body, you can write `foo_type` to +reference the type of a parameter named `foo`. For example, in the +body of `MATCHER_P(HasAbsoluteValue, value)` above, you can write +`value_type` to refer to the type of `value`. + +Google Mock also provides `MATCHER_P2`, `MATCHER_P3`, ..., up to +`MATCHER_P10` to support multi-parameter matchers: +``` +MATCHER_Pk(name, param_1, ..., param_k, description_string) { statements; } +``` + +Please note that the custom description string is for a particular +**instance** of the matcher, where the parameters have been bound to +actual values. Therefore usually you'll want the parameter values to +be part of the description. Google Mock lets you do that by +referencing the matcher parameters in the description string +expression. + +For example, +``` + using ::testing::PrintToString; + MATCHER_P2(InClosedRange, low, hi, + std::string(negation ? "isn't" : "is") + " in range [" + + PrintToString(low) + ", " + PrintToString(hi) + "]") { + return low <= arg && arg <= hi; + } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the message: +``` + Expected: is in range [4, 6] +``` + +If you specify `""` as the description, the failure message will +contain the sequence of words in the matcher name followed by the +parameter values printed as a tuple. For example, +``` + MATCHER_P2(InClosedRange, low, hi, "") { ... } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the text: +``` + Expected: in closed range (4, 6) +``` + +For the purpose of typing, you can view +``` +MATCHER_Pk(Foo, p1, ..., pk, description_string) { ... } +``` +as shorthand for +``` +template +FooMatcherPk +Foo(p1_type p1, ..., pk_type pk) { ... } +``` + +When you write `Foo(v1, ..., vk)`, the compiler infers the types of +the parameters `v1`, ..., and `vk` for you. If you are not happy with +the result of the type inference, you can specify the types by +explicitly instantiating the template, as in `Foo(5, false)`. +As said earlier, you don't get to (or need to) specify +`arg_type` as that's determined by the context in which the matcher +is used. + +You can assign the result of expression `Foo(p1, ..., pk)` to a +variable of type `FooMatcherPk`. This can be +useful when composing matchers. Matchers that don't have a parameter +or have only one parameter have special types: you can assign `Foo()` +to a `FooMatcher`-typed variable, and assign `Foo(p)` to a +`FooMatcherP`-typed variable. + +While you can instantiate a matcher template with reference types, +passing the parameters by pointer usually makes your code more +readable. If, however, you still want to pass a parameter by +reference, be aware that in the failure message generated by the +matcher you will see the value of the referenced object but not its +address. + +You can overload matchers with different numbers of parameters: +``` +MATCHER_P(Blah, a, description_string_1) { ... } +MATCHER_P2(Blah, a, b, description_string_2) { ... } +``` + +While it's tempting to always use the `MATCHER*` macros when defining +a new matcher, you should also consider implementing +`MatcherInterface` or using `MakePolymorphicMatcher()` instead (see +the recipes that follow), especially if you need to use the matcher a +lot. While these approaches require more work, they give you more +control on the types of the value being matched and the matcher +parameters, which in general leads to better compiler error messages +that pay off in the long run. They also allow overloading matchers +based on parameter types (as opposed to just based on the number of +parameters). + +## Writing New Monomorphic Matchers ## + +A matcher of argument type `T` implements +`::testing::MatcherInterface` and does two things: it tests whether a +value of type `T` matches the matcher, and can describe what kind of +values it matches. The latter ability is used for generating readable +error messages when expectations are violated. + +The interface looks like this: + +``` +class MatchResultListener { + public: + ... + // Streams x to the underlying ostream; does nothing if the ostream + // is NULL. + template + MatchResultListener& operator<<(const T& x); + + // Returns the underlying ostream. + ::std::ostream* stream(); +}; + +template +class MatcherInterface { + public: + virtual ~MatcherInterface(); + + // Returns true iff the matcher matches x; also explains the match + // result to 'listener'. + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const = 0; + + // Describes this matcher to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; + + // Describes the negation of this matcher to an ostream. + virtual void DescribeNegationTo(::std::ostream* os) const; +}; +``` + +If you need a custom matcher but `Truly()` is not a good option (for +example, you may not be happy with the way `Truly(predicate)` +describes itself, or you may want your matcher to be polymorphic as +`Eq(value)` is), you can define a matcher to do whatever you want in +two steps: first implement the matcher interface, and then define a +factory function to create a matcher instance. The second step is not +strictly needed but it makes the syntax of using the matcher nicer. + +For example, you can define a matcher to test whether an `int` is +divisible by 7 and then use it like this: +``` +using ::testing::MakeMatcher; +using ::testing::Matcher; +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, MatchResultListener* listener) const { + return (n % 7) == 0; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "is divisible by 7"; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "is not divisible by 7"; + } +}; + +inline Matcher DivisibleBy7() { + return MakeMatcher(new DivisibleBy7Matcher); +} +... + + EXPECT_CALL(foo, Bar(DivisibleBy7())); +``` + +You may improve the matcher message by streaming additional +information to the `listener` argument in `MatchAndExplain()`: + +``` +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, + MatchResultListener* listener) const { + const int remainder = n % 7; + if (remainder != 0) { + *listener << "the remainder is " << remainder; + } + return remainder == 0; + } + ... +}; +``` + +Then, `EXPECT_THAT(x, DivisibleBy7());` may general a message like this: +``` +Value of: x +Expected: is divisible by 7 + Actual: 23 (the remainder is 2) +``` + +## Writing New Polymorphic Matchers ## + +You've learned how to write your own matchers in the previous +recipe. Just one problem: a matcher created using `MakeMatcher()` only +works for one particular type of arguments. If you want a +_polymorphic_ matcher that works with arguments of several types (for +instance, `Eq(x)` can be used to match a `value` as long as `value` == +`x` compiles -- `value` and `x` don't have to share the same type), +you can learn the trick from `"gmock/gmock-matchers.h"` but it's a bit +involved. + +Fortunately, most of the time you can define a polymorphic matcher +easily with the help of `MakePolymorphicMatcher()`. Here's how you can +define `NotNull()` as an example: + +``` +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +using ::testing::NotNull; +using ::testing::PolymorphicMatcher; + +class NotNullMatcher { + public: + // To implement a polymorphic matcher, first define a COPYABLE class + // that has three members MatchAndExplain(), DescribeTo(), and + // DescribeNegationTo(), like the following. + + // In this example, we want to use NotNull() with any pointer, so + // MatchAndExplain() accepts a pointer of any type as its first argument. + // In general, you can define MatchAndExplain() as an ordinary method or + // a method template, or even overload it. + template + bool MatchAndExplain(T* p, + MatchResultListener* /* listener */) const { + return p != NULL; + } + + // Describes the property of a value matching this matcher. + void DescribeTo(::std::ostream* os) const { *os << "is not NULL"; } + + // Describes the property of a value NOT matching this matcher. + void DescribeNegationTo(::std::ostream* os) const { *os << "is NULL"; } +}; + +// To construct a polymorphic matcher, pass an instance of the class +// to MakePolymorphicMatcher(). Note the return type. +inline PolymorphicMatcher NotNull() { + return MakePolymorphicMatcher(NotNullMatcher()); +} +... + + EXPECT_CALL(foo, Bar(NotNull())); // The argument must be a non-NULL pointer. +``` + +**Note:** Your polymorphic matcher class does **not** need to inherit from +`MatcherInterface` or any other class, and its methods do **not** need +to be virtual. + +Like in a monomorphic matcher, you may explain the match result by +streaming additional information to the `listener` argument in +`MatchAndExplain()`. + +## Writing New Cardinalities ## + +A cardinality is used in `Times()` to tell Google Mock how many times +you expect a call to occur. It doesn't have to be exact. For example, +you can say `AtLeast(5)` or `Between(2, 4)`. + +If the built-in set of cardinalities doesn't suit you, you are free to +define your own by implementing the following interface (in namespace +`testing`): + +``` +class CardinalityInterface { + public: + virtual ~CardinalityInterface(); + + // Returns true iff call_count calls will satisfy this cardinality. + virtual bool IsSatisfiedByCallCount(int call_count) const = 0; + + // Returns true iff call_count calls will saturate this cardinality. + virtual bool IsSaturatedByCallCount(int call_count) const = 0; + + // Describes self to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; +}; +``` + +For example, to specify that a call must occur even number of times, +you can write + +``` +using ::testing::Cardinality; +using ::testing::CardinalityInterface; +using ::testing::MakeCardinality; + +class EvenNumberCardinality : public CardinalityInterface { + public: + virtual bool IsSatisfiedByCallCount(int call_count) const { + return (call_count % 2) == 0; + } + + virtual bool IsSaturatedByCallCount(int call_count) const { + return false; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "called even number of times"; + } +}; + +Cardinality EvenNumber() { + return MakeCardinality(new EvenNumberCardinality); +} +... + + EXPECT_CALL(foo, Bar(3)) + .Times(EvenNumber()); +``` + +## Writing New Actions Quickly ## + +If the built-in actions don't work for you, and you find it +inconvenient to use `Invoke()`, you can use a macro from the `ACTION*` +family to quickly define a new action that can be used in your code as +if it's a built-in action. + +By writing +``` +ACTION(name) { statements; } +``` +in a namespace scope (i.e. not inside a class or function), you will +define an action with the given name that executes the statements. +The value returned by `statements` will be used as the return value of +the action. Inside the statements, you can refer to the K-th +(0-based) argument of the mock function as `argK`. For example: +``` +ACTION(IncrementArg1) { return ++(*arg1); } +``` +allows you to write +``` +... WillOnce(IncrementArg1()); +``` + +Note that you don't need to specify the types of the mock function +arguments. Rest assured that your code is type-safe though: +you'll get a compiler error if `*arg1` doesn't support the `++` +operator, or if the type of `++(*arg1)` isn't compatible with the mock +function's return type. + +Another example: +``` +ACTION(Foo) { + (*arg2)(5); + Blah(); + *arg1 = 0; + return arg0; +} +``` +defines an action `Foo()` that invokes argument #2 (a function pointer) +with 5, calls function `Blah()`, sets the value pointed to by argument +#1 to 0, and returns argument #0. + +For more convenience and flexibility, you can also use the following +pre-defined symbols in the body of `ACTION`: + +| `argK_type` | The type of the K-th (0-based) argument of the mock function | +|:------------|:-------------------------------------------------------------| +| `args` | All arguments of the mock function as a tuple | +| `args_type` | The type of all arguments of the mock function as a tuple | +| `return_type` | The return type of the mock function | +| `function_type` | The type of the mock function | + +For example, when using an `ACTION` as a stub action for mock function: +``` +int DoSomething(bool flag, int* ptr); +``` +we have: +| **Pre-defined Symbol** | **Is Bound To** | +|:-----------------------|:----------------| +| `arg0` | the value of `flag` | +| `arg0_type` | the type `bool` | +| `arg1` | the value of `ptr` | +| `arg1_type` | the type `int*` | +| `args` | the tuple `(flag, ptr)` | +| `args_type` | the type `std::tr1::tuple` | +| `return_type` | the type `int` | +| `function_type` | the type `int(bool, int*)` | + +## Writing New Parameterized Actions Quickly ## + +Sometimes you'll want to parameterize an action you define. For that +we have another macro +``` +ACTION_P(name, param) { statements; } +``` + +For example, +``` +ACTION_P(Add, n) { return arg0 + n; } +``` +will allow you to write +``` +// Returns argument #0 + 5. +... WillOnce(Add(5)); +``` + +For convenience, we use the term _arguments_ for the values used to +invoke the mock function, and the term _parameters_ for the values +used to instantiate an action. + +Note that you don't need to provide the type of the parameter either. +Suppose the parameter is named `param`, you can also use the +Google-Mock-defined symbol `param_type` to refer to the type of the +parameter as inferred by the compiler. For example, in the body of +`ACTION_P(Add, n)` above, you can write `n_type` for the type of `n`. + +Google Mock also provides `ACTION_P2`, `ACTION_P3`, and etc to support +multi-parameter actions. For example, +``` +ACTION_P2(ReturnDistanceTo, x, y) { + double dx = arg0 - x; + double dy = arg1 - y; + return sqrt(dx*dx + dy*dy); +} +``` +lets you write +``` +... WillOnce(ReturnDistanceTo(5.0, 26.5)); +``` + +You can view `ACTION` as a degenerated parameterized action where the +number of parameters is 0. + +You can also easily define actions overloaded on the number of parameters: +``` +ACTION_P(Plus, a) { ... } +ACTION_P2(Plus, a, b) { ... } +``` + +## Restricting the Type of an Argument or Parameter in an ACTION ## + +For maximum brevity and reusability, the `ACTION*` macros don't ask +you to provide the types of the mock function arguments and the action +parameters. Instead, we let the compiler infer the types for us. + +Sometimes, however, we may want to be more explicit about the types. +There are several tricks to do that. For example: +``` +ACTION(Foo) { + // Makes sure arg0 can be converted to int. + int n = arg0; + ... use n instead of arg0 here ... +} + +ACTION_P(Bar, param) { + // Makes sure the type of arg1 is const char*. + ::testing::StaticAssertTypeEq(); + + // Makes sure param can be converted to bool. + bool flag = param; +} +``` +where `StaticAssertTypeEq` is a compile-time assertion in Google Test +that verifies two types are the same. + +## Writing New Action Templates Quickly ## + +Sometimes you want to give an action explicit template parameters that +cannot be inferred from its value parameters. `ACTION_TEMPLATE()` +supports that and can be viewed as an extension to `ACTION()` and +`ACTION_P*()`. + +The syntax: +``` +ACTION_TEMPLATE(ActionName, + HAS_m_TEMPLATE_PARAMS(kind1, name1, ..., kind_m, name_m), + AND_n_VALUE_PARAMS(p1, ..., p_n)) { statements; } +``` + +defines an action template that takes _m_ explicit template parameters +and _n_ value parameters, where _m_ is between 1 and 10, and _n_ is +between 0 and 10. `name_i` is the name of the i-th template +parameter, and `kind_i` specifies whether it's a `typename`, an +integral constant, or a template. `p_i` is the name of the i-th value +parameter. + +Example: +``` +// DuplicateArg(output) converts the k-th argument of the mock +// function to type T and copies it to *output. +ACTION_TEMPLATE(DuplicateArg, + // Note the comma between int and k: + HAS_2_TEMPLATE_PARAMS(int, k, typename, T), + AND_1_VALUE_PARAMS(output)) { + *output = T(std::tr1::get(args)); +} +``` + +To create an instance of an action template, write: +``` + ActionName(v1, ..., v_n) +``` +where the `t`s are the template arguments and the +`v`s are the value arguments. The value argument +types are inferred by the compiler. For example: +``` +using ::testing::_; +... + int n; + EXPECT_CALL(mock, Foo(_, _)) + .WillOnce(DuplicateArg<1, unsigned char>(&n)); +``` + +If you want to explicitly specify the value argument types, you can +provide additional template arguments: +``` + ActionName(v1, ..., v_n) +``` +where `u_i` is the desired type of `v_i`. + +`ACTION_TEMPLATE` and `ACTION`/`ACTION_P*` can be overloaded on the +number of value parameters, but not on the number of template +parameters. Without the restriction, the meaning of the following is +unclear: + +``` + OverloadedAction(x); +``` + +Are we using a single-template-parameter action where `bool` refers to +the type of `x`, or a two-template-parameter action where the compiler +is asked to infer the type of `x`? + +## Using the ACTION Object's Type ## + +If you are writing a function that returns an `ACTION` object, you'll +need to know its type. The type depends on the macro used to define +the action and the parameter types. The rule is relatively simple: +| **Given Definition** | **Expression** | **Has Type** | +|:---------------------|:---------------|:-------------| +| `ACTION(Foo)` | `Foo()` | `FooAction` | +| `ACTION_TEMPLATE(Foo, HAS_m_TEMPLATE_PARAMS(...), AND_0_VALUE_PARAMS())` | `Foo()` | `FooAction` | +| `ACTION_P(Bar, param)` | `Bar(int_value)` | `BarActionP` | +| `ACTION_TEMPLATE(Bar, HAS_m_TEMPLATE_PARAMS(...), AND_1_VALUE_PARAMS(p1))` | `Bar(int_value)` | `FooActionP` | +| `ACTION_P2(Baz, p1, p2)` | `Baz(bool_value, int_value)` | `BazActionP2` | +| `ACTION_TEMPLATE(Baz, HAS_m_TEMPLATE_PARAMS(...), AND_2_VALUE_PARAMS(p1, p2))` | `Baz(bool_value, int_value)` | `FooActionP2` | +| ... | ... | ... | + +Note that we have to pick different suffixes (`Action`, `ActionP`, +`ActionP2`, and etc) for actions with different numbers of value +parameters, or the action definitions cannot be overloaded on the +number of them. + +## Writing New Monomorphic Actions ## + +While the `ACTION*` macros are very convenient, sometimes they are +inappropriate. For example, despite the tricks shown in the previous +recipes, they don't let you directly specify the types of the mock +function arguments and the action parameters, which in general leads +to unoptimized compiler error messages that can baffle unfamiliar +users. They also don't allow overloading actions based on parameter +types without jumping through some hoops. + +An alternative to the `ACTION*` macros is to implement +`::testing::ActionInterface`, where `F` is the type of the mock +function in which the action will be used. For example: + +``` +template class ActionInterface { + public: + virtual ~ActionInterface(); + + // Performs the action. Result is the return type of function type + // F, and ArgumentTuple is the tuple of arguments of F. + // + // For example, if F is int(bool, const string&), then Result would + // be int, and ArgumentTuple would be tr1::tuple. + virtual Result Perform(const ArgumentTuple& args) = 0; +}; + +using ::testing::_; +using ::testing::Action; +using ::testing::ActionInterface; +using ::testing::MakeAction; + +typedef int IncrementMethod(int*); + +class IncrementArgumentAction : public ActionInterface { + public: + virtual int Perform(const tr1::tuple& args) { + int* p = tr1::get<0>(args); // Grabs the first argument. + return *p++; + } +}; + +Action IncrementArgument() { + return MakeAction(new IncrementArgumentAction); +} +... + + EXPECT_CALL(foo, Baz(_)) + .WillOnce(IncrementArgument()); + + int n = 5; + foo.Baz(&n); // Should return 5 and change n to 6. +``` + +## Writing New Polymorphic Actions ## + +The previous recipe showed you how to define your own action. This is +all good, except that you need to know the type of the function in +which the action will be used. Sometimes that can be a problem. For +example, if you want to use the action in functions with _different_ +types (e.g. like `Return()` and `SetArgPointee()`). + +If an action can be used in several types of mock functions, we say +it's _polymorphic_. The `MakePolymorphicAction()` function template +makes it easy to define such an action: + +``` +namespace testing { + +template +PolymorphicAction MakePolymorphicAction(const Impl& impl); + +} // namespace testing +``` + +As an example, let's define an action that returns the second argument +in the mock function's argument list. The first step is to define an +implementation class: + +``` +class ReturnSecondArgumentAction { + public: + template + Result Perform(const ArgumentTuple& args) const { + // To get the i-th (0-based) argument, use tr1::get(args). + return tr1::get<1>(args); + } +}; +``` + +This implementation class does _not_ need to inherit from any +particular class. What matters is that it must have a `Perform()` +method template. This method template takes the mock function's +arguments as a tuple in a **single** argument, and returns the result of +the action. It can be either `const` or not, but must be invokable +with exactly one template argument, which is the result type. In other +words, you must be able to call `Perform(args)` where `R` is the +mock function's return type and `args` is its arguments in a tuple. + +Next, we use `MakePolymorphicAction()` to turn an instance of the +implementation class into the polymorphic action we need. It will be +convenient to have a wrapper for this: + +``` +using ::testing::MakePolymorphicAction; +using ::testing::PolymorphicAction; + +PolymorphicAction ReturnSecondArgument() { + return MakePolymorphicAction(ReturnSecondArgumentAction()); +} +``` + +Now, you can use this polymorphic action the same way you use the +built-in ones: + +``` +using ::testing::_; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, int(bool flag, int n)); + MOCK_METHOD3(DoThat, string(int x, const char* str1, const char* str2)); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(ReturnSecondArgument()); + EXPECT_CALL(foo, DoThat(_, _, _)) + .WillOnce(ReturnSecondArgument()); + ... + foo.DoThis(true, 5); // Will return 5. + foo.DoThat(1, "Hi", "Bye"); // Will return "Hi". +``` + +## Teaching Google Mock How to Print Your Values ## + +When an uninteresting or unexpected call occurs, Google Mock prints the +argument values and the stack trace to help you debug. Assertion +macros like `EXPECT_THAT` and `EXPECT_EQ` also print the values in +question when the assertion fails. Google Mock and Google Test do this using +Google Test's user-extensible value printer. + +This printer knows how to print built-in C++ types, native arrays, STL +containers, and any type that supports the `<<` operator. For other +types, it prints the raw bytes in the value and hopes that you the +user can figure it out. +[Google Test's advanced guide](http://code.google.com/p/googletest/wiki/V1_6_AdvancedGuide#Teaching_Google_Test_How_to_Print_Your_Values) +explains how to extend the printer to do a better job at +printing your particular type than to dump the bytes. \ No newline at end of file diff --git a/googlemock/docs/v1_6/Documentation.md b/googlemock/docs/v1_6/Documentation.md new file mode 100644 index 0000000..dcc9156 --- /dev/null +++ b/googlemock/docs/v1_6/Documentation.md @@ -0,0 +1,12 @@ +This page lists all documentation wiki pages for Google Mock **1.6** +- **if you use a released version of Google Mock, please read the documentation for that specific version instead.** + + * [ForDummies](V1_6_ForDummies.md) -- start here if you are new to Google Mock. + * [CheatSheet](V1_6_CheatSheet.md) -- a quick reference. + * [CookBook](V1_6_CookBook.md) -- recipes for doing various tasks using Google Mock. + * [FrequentlyAskedQuestions](V1_6_FrequentlyAskedQuestions.md) -- check here before asking a question on the mailing list. + +To contribute code to Google Mock, read: + + * [DevGuide](DevGuide.md) -- read this _before_ writing your first patch. + * [Pump Manual](http://code.google.com/p/googletest/wiki/V1_6_PumpManual) -- how we generate some of Google Mock's source files. \ No newline at end of file diff --git a/googlemock/docs/v1_6/ForDummies.md b/googlemock/docs/v1_6/ForDummies.md new file mode 100644 index 0000000..19ee63a --- /dev/null +++ b/googlemock/docs/v1_6/ForDummies.md @@ -0,0 +1,439 @@ + + +(**Note:** If you get compiler errors that you don't understand, be sure to consult [Google Mock Doctor](http://code.google.com/p/googlemock/wiki/V1_6_FrequentlyAskedQuestions#How_am_I_supposed_to_make_sense_of_these_horrible_template_error).) + +# What Is Google C++ Mocking Framework? # +When you write a prototype or test, often it's not feasible or wise to rely on real objects entirely. A **mock object** implements the same interface as a real object (so it can be used as one), but lets you specify at run time how it will be used and what it should do (which methods will be called? in which order? how many times? with what arguments? what will they return? etc). + +**Note:** It is easy to confuse the term _fake objects_ with mock objects. Fakes and mocks actually mean very different things in the Test-Driven Development (TDD) community: + + * **Fake** objects have working implementations, but usually take some shortcut (perhaps to make the operations less expensive), which makes them not suitable for production. An in-memory file system would be an example of a fake. + * **Mocks** are objects pre-programmed with _expectations_, which form a specification of the calls they are expected to receive. + +If all this seems too abstract for you, don't worry - the most important thing to remember is that a mock allows you to check the _interaction_ between itself and code that uses it. The difference between fakes and mocks will become much clearer once you start to use mocks. + +**Google C++ Mocking Framework** (or **Google Mock** for short) is a library (sometimes we also call it a "framework" to make it sound cool) for creating mock classes and using them. It does to C++ what [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/) do to Java. + +Using Google Mock involves three basic steps: + + 1. Use some simple macros to describe the interface you want to mock, and they will expand to the implementation of your mock class; + 1. Create some mock objects and specify its expectations and behavior using an intuitive syntax; + 1. Exercise code that uses the mock objects. Google Mock will catch any violation of the expectations as soon as it arises. + +# Why Google Mock? # +While mock objects help you remove unnecessary dependencies in tests and make them fast and reliable, using mocks manually in C++ is _hard_: + + * Someone has to implement the mocks. The job is usually tedious and error-prone. No wonder people go great distance to avoid it. + * The quality of those manually written mocks is a bit, uh, unpredictable. You may see some really polished ones, but you may also see some that were hacked up in a hurry and have all sorts of ad hoc restrictions. + * The knowledge you gained from using one mock doesn't transfer to the next. + +In contrast, Java and Python programmers have some fine mock frameworks, which automate the creation of mocks. As a result, mocking is a proven effective technique and widely adopted practice in those communities. Having the right tool absolutely makes the difference. + +Google Mock was built to help C++ programmers. It was inspired by [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/), but designed with C++'s specifics in mind. It is your friend if any of the following problems is bothering you: + + * You are stuck with a sub-optimal design and wish you had done more prototyping before it was too late, but prototyping in C++ is by no means "rapid". + * Your tests are slow as they depend on too many libraries or use expensive resources (e.g. a database). + * Your tests are brittle as some resources they use are unreliable (e.g. the network). + * You want to test how your code handles a failure (e.g. a file checksum error), but it's not easy to cause one. + * You need to make sure that your module interacts with other modules in the right way, but it's hard to observe the interaction; therefore you resort to observing the side effects at the end of the action, which is awkward at best. + * You want to "mock out" your dependencies, except that they don't have mock implementations yet; and, frankly, you aren't thrilled by some of those hand-written mocks. + +We encourage you to use Google Mock as: + + * a _design_ tool, for it lets you experiment with your interface design early and often. More iterations lead to better designs! + * a _testing_ tool to cut your tests' outbound dependencies and probe the interaction between your module and its collaborators. + +# Getting Started # +Using Google Mock is easy! Inside your C++ source file, just `#include` `"gtest/gtest.h"` and `"gmock/gmock.h"`, and you are ready to go. + +# A Case for Mock Turtles # +Let's look at an example. Suppose you are developing a graphics program that relies on a LOGO-like API for drawing. How would you test that it does the right thing? Well, you can run it and compare the screen with a golden screen snapshot, but let's admit it: tests like this are expensive to run and fragile (What if you just upgraded to a shiny new graphics card that has better anti-aliasing? Suddenly you have to update all your golden images.). It would be too painful if all your tests are like this. Fortunately, you learned about Dependency Injection and know the right thing to do: instead of having your application talk to the drawing API directly, wrap the API in an interface (say, `Turtle`) and code to that interface: + +``` +class Turtle { + ... + virtual ~Turtle() {} + virtual void PenUp() = 0; + virtual void PenDown() = 0; + virtual void Forward(int distance) = 0; + virtual void Turn(int degrees) = 0; + virtual void GoTo(int x, int y) = 0; + virtual int GetX() const = 0; + virtual int GetY() const = 0; +}; +``` + +(Note that the destructor of `Turtle` **must** be virtual, as is the case for **all** classes you intend to inherit from - otherwise the destructor of the derived class will not be called when you delete an object through a base pointer, and you'll get corrupted program states like memory leaks.) + +You can control whether the turtle's movement will leave a trace using `PenUp()` and `PenDown()`, and control its movement using `Forward()`, `Turn()`, and `GoTo()`. Finally, `GetX()` and `GetY()` tell you the current position of the turtle. + +Your program will normally use a real implementation of this interface. In tests, you can use a mock implementation instead. This allows you to easily check what drawing primitives your program is calling, with what arguments, and in which order. Tests written this way are much more robust (they won't break because your new machine does anti-aliasing differently), easier to read and maintain (the intent of a test is expressed in the code, not in some binary images), and run _much, much faster_. + +# Writing the Mock Class # +If you are lucky, the mocks you need to use have already been implemented by some nice people. If, however, you find yourself in the position to write a mock class, relax - Google Mock turns this task into a fun game! (Well, almost.) + +## How to Define It ## +Using the `Turtle` interface as example, here are the simple steps you need to follow: + + 1. Derive a class `MockTurtle` from `Turtle`. + 1. Take a _virtual_ function of `Turtle` (while it's possible to [mock non-virtual methods using templates](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Mocking_Nonvirtual_Methods), it's much more involved). Count how many arguments it has. + 1. In the `public:` section of the child class, write `MOCK_METHODn();` (or `MOCK_CONST_METHODn();` if you are mocking a `const` method), where `n` is the number of the arguments; if you counted wrong, shame on you, and a compiler error will tell you so. + 1. Now comes the fun part: you take the function signature, cut-and-paste the _function name_ as the _first_ argument to the macro, and leave what's left as the _second_ argument (in case you're curious, this is the _type of the function_). + 1. Repeat until all virtual functions you want to mock are done. + +After the process, you should have something like: + +``` +#include "gmock/gmock.h" // Brings in Google Mock. +class MockTurtle : public Turtle { + public: + ... + MOCK_METHOD0(PenUp, void()); + MOCK_METHOD0(PenDown, void()); + MOCK_METHOD1(Forward, void(int distance)); + MOCK_METHOD1(Turn, void(int degrees)); + MOCK_METHOD2(GoTo, void(int x, int y)); + MOCK_CONST_METHOD0(GetX, int()); + MOCK_CONST_METHOD0(GetY, int()); +}; +``` + +You don't need to define these mock methods somewhere else - the `MOCK_METHOD*` macros will generate the definitions for you. It's that simple! Once you get the hang of it, you can pump out mock classes faster than your source-control system can handle your check-ins. + +**Tip:** If even this is too much work for you, you'll find the +`gmock_gen.py` tool in Google Mock's `scripts/generator/` directory (courtesy of the [cppclean](http://code.google.com/p/cppclean/) project) useful. This command-line +tool requires that you have Python 2.4 installed. You give it a C++ file and the name of an abstract class defined in it, +and it will print the definition of the mock class for you. Due to the +complexity of the C++ language, this script may not always work, but +it can be quite handy when it does. For more details, read the [user documentation](http://code.google.com/p/googlemock/source/browse/trunk/scripts/generator/README). + +## Where to Put It ## +When you define a mock class, you need to decide where to put its definition. Some people put it in a `*_test.cc`. This is fine when the interface being mocked (say, `Foo`) is owned by the same person or team. Otherwise, when the owner of `Foo` changes it, your test could break. (You can't really expect `Foo`'s maintainer to fix every test that uses `Foo`, can you?) + +So, the rule of thumb is: if you need to mock `Foo` and it's owned by others, define the mock class in `Foo`'s package (better, in a `testing` sub-package such that you can clearly separate production code and testing utilities), and put it in a `mock_foo.h`. Then everyone can reference `mock_foo.h` from their tests. If `Foo` ever changes, there is only one copy of `MockFoo` to change, and only tests that depend on the changed methods need to be fixed. + +Another way to do it: you can introduce a thin layer `FooAdaptor` on top of `Foo` and code to this new interface. Since you own `FooAdaptor`, you can absorb changes in `Foo` much more easily. While this is more work initially, carefully choosing the adaptor interface can make your code easier to write and more readable (a net win in the long run), as you can choose `FooAdaptor` to fit your specific domain much better than `Foo` does. + +# Using Mocks in Tests # +Once you have a mock class, using it is easy. The typical work flow is: + + 1. Import the Google Mock names from the `testing` namespace such that you can use them unqualified (You only have to do it once per file. Remember that namespaces are a good idea and good for your health.). + 1. Create some mock objects. + 1. Specify your expectations on them (How many times will a method be called? With what arguments? What should it do? etc.). + 1. Exercise some code that uses the mocks; optionally, check the result using Google Test assertions. If a mock method is called more than expected or with wrong arguments, you'll get an error immediately. + 1. When a mock is destructed, Google Mock will automatically check whether all expectations on it have been satisfied. + +Here's an example: + +``` +#include "path/to/mock-turtle.h" +#include "gmock/gmock.h" +#include "gtest/gtest.h" +using ::testing::AtLeast; // #1 + +TEST(PainterTest, CanDrawSomething) { + MockTurtle turtle; // #2 + EXPECT_CALL(turtle, PenDown()) // #3 + .Times(AtLeast(1)); + + Painter painter(&turtle); // #4 + + EXPECT_TRUE(painter.DrawCircle(0, 0, 10)); +} // #5 + +int main(int argc, char** argv) { + // The following line must be executed to initialize Google Mock + // (and Google Test) before running the tests. + ::testing::InitGoogleMock(&argc, argv); + return RUN_ALL_TESTS(); +} +``` + +As you might have guessed, this test checks that `PenDown()` is called at least once. If the `painter` object didn't call this method, your test will fail with a message like this: + +``` +path/to/my_test.cc:119: Failure +Actual function call count doesn't match this expectation: +Actually: never called; +Expected: called at least once. +``` + +**Tip 1:** If you run the test from an Emacs buffer, you can hit `` on the line number displayed in the error message to jump right to the failed expectation. + +**Tip 2:** If your mock objects are never deleted, the final verification won't happen. Therefore it's a good idea to use a heap leak checker in your tests when you allocate mocks on the heap. + +**Important note:** Google Mock requires expectations to be set **before** the mock functions are called, otherwise the behavior is **undefined**. In particular, you mustn't interleave `EXPECT_CALL()`s and calls to the mock functions. + +This means `EXPECT_CALL()` should be read as expecting that a call will occur _in the future_, not that a call has occurred. Why does Google Mock work like that? Well, specifying the expectation beforehand allows Google Mock to report a violation as soon as it arises, when the context (stack trace, etc) is still available. This makes debugging much easier. + +Admittedly, this test is contrived and doesn't do much. You can easily achieve the same effect without using Google Mock. However, as we shall reveal soon, Google Mock allows you to do _much more_ with the mocks. + +## Using Google Mock with Any Testing Framework ## +If you want to use something other than Google Test (e.g. [CppUnit](http://apps.sourceforge.net/mediawiki/cppunit/index.php?title=Main_Page) or +[CxxTest](http://cxxtest.tigris.org/)) as your testing framework, just change the `main()` function in the previous section to: +``` +int main(int argc, char** argv) { + // The following line causes Google Mock to throw an exception on failure, + // which will be interpreted by your testing framework as a test failure. + ::testing::GTEST_FLAG(throw_on_failure) = true; + ::testing::InitGoogleMock(&argc, argv); + ... whatever your testing framework requires ... +} +``` + +This approach has a catch: it makes Google Mock throw an exception +from a mock object's destructor sometimes. With some compilers, this +sometimes causes the test program to crash. You'll still be able to +notice that the test has failed, but it's not a graceful failure. + +A better solution is to use Google Test's +[event listener API](http://code.google.com/p/googletest/wiki/V1_6_AdvancedGuide#Extending_Google_Test_by_Handling_Test_Events) +to report a test failure to your testing framework properly. You'll need to +implement the `OnTestPartResult()` method of the event listener interface, but it +should be straightforward. + +If this turns out to be too much work, we suggest that you stick with +Google Test, which works with Google Mock seamlessly (in fact, it is +technically part of Google Mock.). If there is a reason that you +cannot use Google Test, please let us know. + +# Setting Expectations # +The key to using a mock object successfully is to set the _right expectations_ on it. If you set the expectations too strict, your test will fail as the result of unrelated changes. If you set them too loose, bugs can slip through. You want to do it just right such that your test can catch exactly the kind of bugs you intend it to catch. Google Mock provides the necessary means for you to do it "just right." + +## General Syntax ## +In Google Mock we use the `EXPECT_CALL()` macro to set an expectation on a mock method. The general syntax is: + +``` +EXPECT_CALL(mock_object, method(matchers)) + .Times(cardinality) + .WillOnce(action) + .WillRepeatedly(action); +``` + +The macro has two arguments: first the mock object, and then the method and its arguments. Note that the two are separated by a comma (`,`), not a period (`.`). (Why using a comma? The answer is that it was necessary for technical reasons.) + +The macro can be followed by some optional _clauses_ that provide more information about the expectation. We'll discuss how each clause works in the coming sections. + +This syntax is designed to make an expectation read like English. For example, you can probably guess that + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .Times(5) + .WillOnce(Return(100)) + .WillOnce(Return(150)) + .WillRepeatedly(Return(200)); +``` + +says that the `turtle` object's `GetX()` method will be called five times, it will return 100 the first time, 150 the second time, and then 200 every time. Some people like to call this style of syntax a Domain-Specific Language (DSL). + +**Note:** Why do we use a macro to do this? It serves two purposes: first it makes expectations easily identifiable (either by `grep` or by a human reader), and second it allows Google Mock to include the source file location of a failed expectation in messages, making debugging easier. + +## Matchers: What Arguments Do We Expect? ## +When a mock function takes arguments, we must specify what arguments we are expecting; for example: + +``` +// Expects the turtle to move forward by 100 units. +EXPECT_CALL(turtle, Forward(100)); +``` + +Sometimes you may not want to be too specific (Remember that talk about tests being too rigid? Over specification leads to brittle tests and obscures the intent of tests. Therefore we encourage you to specify only what's necessary - no more, no less.). If you care to check that `Forward()` will be called but aren't interested in its actual argument, write `_` as the argument, which means "anything goes": + +``` +using ::testing::_; +... +// Expects the turtle to move forward. +EXPECT_CALL(turtle, Forward(_)); +``` + +`_` is an instance of what we call **matchers**. A matcher is like a predicate and can test whether an argument is what we'd expect. You can use a matcher inside `EXPECT_CALL()` wherever a function argument is expected. + +A list of built-in matchers can be found in the [CheatSheet](V1_6_CheatSheet.md). For example, here's the `Ge` (greater than or equal) matcher: + +``` +using ::testing::Ge;... +EXPECT_CALL(turtle, Forward(Ge(100))); +``` + +This checks that the turtle will be told to go forward by at least 100 units. + +## Cardinalities: How Many Times Will It Be Called? ## +The first clause we can specify following an `EXPECT_CALL()` is `Times()`. We call its argument a **cardinality** as it tells _how many times_ the call should occur. It allows us to repeat an expectation many times without actually writing it as many times. More importantly, a cardinality can be "fuzzy", just like a matcher can be. This allows a user to express the intent of a test exactly. + +An interesting special case is when we say `Times(0)`. You may have guessed - it means that the function shouldn't be called with the given arguments at all, and Google Mock will report a Google Test failure whenever the function is (wrongfully) called. + +We've seen `AtLeast(n)` as an example of fuzzy cardinalities earlier. For the list of built-in cardinalities you can use, see the [CheatSheet](V1_6_CheatSheet.md). + +The `Times()` clause can be omitted. **If you omit `Times()`, Google Mock will infer the cardinality for you.** The rules are easy to remember: + + * If **neither** `WillOnce()` **nor** `WillRepeatedly()` is in the `EXPECT_CALL()`, the inferred cardinality is `Times(1)`. + * If there are `n WillOnce()`'s but **no** `WillRepeatedly()`, where `n` >= 1, the cardinality is `Times(n)`. + * If there are `n WillOnce()`'s and **one** `WillRepeatedly()`, where `n` >= 0, the cardinality is `Times(AtLeast(n))`. + +**Quick quiz:** what do you think will happen if a function is expected to be called twice but actually called four times? + +## Actions: What Should It Do? ## +Remember that a mock object doesn't really have a working implementation? We as users have to tell it what to do when a method is invoked. This is easy in Google Mock. + +First, if the return type of a mock function is a built-in type or a pointer, the function has a **default action** (a `void` function will just return, a `bool` function will return `false`, and other functions will return 0). If you don't say anything, this behavior will be used. + +Second, if a mock function doesn't have a default action, or the default action doesn't suit you, you can specify the action to be taken each time the expectation matches using a series of `WillOnce()` clauses followed by an optional `WillRepeatedly()`. For example, + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillOnce(Return(300)); +``` + +This says that `turtle.GetX()` will be called _exactly three times_ (Google Mock inferred this from how many `WillOnce()` clauses we've written, since we didn't explicitly write `Times()`), and will return 100, 200, and 300 respectively. + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillRepeatedly(Return(300)); +``` + +says that `turtle.GetY()` will be called _at least twice_ (Google Mock knows this as we've written two `WillOnce()` clauses and a `WillRepeatedly()` while having no explicit `Times()`), will return 100 the first time, 200 the second time, and 300 from the third time on. + +Of course, if you explicitly write a `Times()`, Google Mock will not try to infer the cardinality itself. What if the number you specified is larger than there are `WillOnce()` clauses? Well, after all `WillOnce()`s are used up, Google Mock will do the _default_ action for the function every time (unless, of course, you have a `WillRepeatedly()`.). + +What can we do inside `WillOnce()` besides `Return()`? You can return a reference using `ReturnRef(variable)`, or invoke a pre-defined function, among [others](http://code.google.com/p/googlemock/wiki/V1_6_CheatSheet#Actions). + +**Important note:** The `EXPECT_CALL()` statement evaluates the action clause only once, even though the action may be performed many times. Therefore you must be careful about side effects. The following may not do what you want: + +``` +int n = 100; +EXPECT_CALL(turtle, GetX()) +.Times(4) +.WillRepeatedly(Return(n++)); +``` + +Instead of returning 100, 101, 102, ..., consecutively, this mock function will always return 100 as `n++` is only evaluated once. Similarly, `Return(new Foo)` will create a new `Foo` object when the `EXPECT_CALL()` is executed, and will return the same pointer every time. If you want the side effect to happen every time, you need to define a custom action, which we'll teach in the [CookBook](V1_6_CookBook.md). + +Time for another quiz! What do you think the following means? + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) +.Times(4) +.WillOnce(Return(100)); +``` + +Obviously `turtle.GetY()` is expected to be called four times. But if you think it will return 100 every time, think twice! Remember that one `WillOnce()` clause will be consumed each time the function is invoked and the default action will be taken afterwards. So the right answer is that `turtle.GetY()` will return 100 the first time, but **return 0 from the second time on**, as returning 0 is the default action for `int` functions. + +## Using Multiple Expectations ## +So far we've only shown examples where you have a single expectation. More realistically, you're going to specify expectations on multiple mock methods, which may be from multiple mock objects. + +By default, when a mock method is invoked, Google Mock will search the expectations in the **reverse order** they are defined, and stop when an active expectation that matches the arguments is found (you can think of it as "newer rules override older ones."). If the matching expectation cannot take any more calls, you will get an upper-bound-violated failure. Here's an example: + +``` +using ::testing::_;... +EXPECT_CALL(turtle, Forward(_)); // #1 +EXPECT_CALL(turtle, Forward(10)) // #2 + .Times(2); +``` + +If `Forward(10)` is called three times in a row, the third time it will be an error, as the last matching expectation (#2) has been saturated. If, however, the third `Forward(10)` call is replaced by `Forward(20)`, then it would be OK, as now #1 will be the matching expectation. + +**Side note:** Why does Google Mock search for a match in the _reverse_ order of the expectations? The reason is that this allows a user to set up the default expectations in a mock object's constructor or the test fixture's set-up phase and then customize the mock by writing more specific expectations in the test body. So, if you have two expectations on the same method, you want to put the one with more specific matchers **after** the other, or the more specific rule would be shadowed by the more general one that comes after it. + +## Ordered vs Unordered Calls ## +By default, an expectation can match a call even though an earlier expectation hasn't been satisfied. In other words, the calls don't have to occur in the order the expectations are specified. + +Sometimes, you may want all the expected calls to occur in a strict order. To say this in Google Mock is easy: + +``` +using ::testing::InSequence;... +TEST(FooTest, DrawsLineSegment) { + ... + { + InSequence dummy; + + EXPECT_CALL(turtle, PenDown()); + EXPECT_CALL(turtle, Forward(100)); + EXPECT_CALL(turtle, PenUp()); + } + Foo(); +} +``` + +By creating an object of type `InSequence`, all expectations in its scope are put into a _sequence_ and have to occur _sequentially_. Since we are just relying on the constructor and destructor of this object to do the actual work, its name is really irrelevant. + +In this example, we test that `Foo()` calls the three expected functions in the order as written. If a call is made out-of-order, it will be an error. + +(What if you care about the relative order of some of the calls, but not all of them? Can you specify an arbitrary partial order? The answer is ... yes! If you are impatient, the details can be found in the [CookBook](V1_6_CookBook.md).) + +## All Expectations Are Sticky (Unless Said Otherwise) ## +Now let's do a quick quiz to see how well you can use this mock stuff already. How would you test that the turtle is asked to go to the origin _exactly twice_ (you want to ignore any other instructions it receives)? + +After you've come up with your answer, take a look at ours and compare notes (solve it yourself first - don't cheat!): + +``` +using ::testing::_;... +EXPECT_CALL(turtle, GoTo(_, _)) // #1 + .Times(AnyNumber()); +EXPECT_CALL(turtle, GoTo(0, 0)) // #2 + .Times(2); +``` + +Suppose `turtle.GoTo(0, 0)` is called three times. In the third time, Google Mock will see that the arguments match expectation #2 (remember that we always pick the last matching expectation). Now, since we said that there should be only two such calls, Google Mock will report an error immediately. This is basically what we've told you in the "Using Multiple Expectations" section above. + +This example shows that **expectations in Google Mock are "sticky" by default**, in the sense that they remain active even after we have reached their invocation upper bounds. This is an important rule to remember, as it affects the meaning of the spec, and is **different** to how it's done in many other mocking frameworks (Why'd we do that? Because we think our rule makes the common cases easier to express and understand.). + +Simple? Let's see if you've really understood it: what does the following code say? + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)); +} +``` + +If you think it says that `turtle.GetX()` will be called `n` times and will return 10, 20, 30, ..., consecutively, think twice! The problem is that, as we said, expectations are sticky. So, the second time `turtle.GetX()` is called, the last (latest) `EXPECT_CALL()` statement will match, and will immediately lead to an "upper bound exceeded" error - this piece of code is not very useful! + +One correct way of saying that `turtle.GetX()` will return 10, 20, 30, ..., is to explicitly say that the expectations are _not_ sticky. In other words, they should _retire_ as soon as they are saturated: + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); +} +``` + +And, there's a better way to do it: in this case, we expect the calls to occur in a specific order, and we line up the actions to match the order. Since the order is important here, we should make it explicit using a sequence: + +``` +using ::testing::InSequence; +using ::testing::Return; +... +{ + InSequence s; + + for (int i = 1; i <= n; i++) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); + } +} +``` + +By the way, the other situation where an expectation may _not_ be sticky is when it's in a sequence - as soon as another expectation that comes after it in the sequence has been used, it automatically retires (and will never be used to match any call). + +## Uninteresting Calls ## +A mock object may have many methods, and not all of them are that interesting. For example, in some tests we may not care about how many times `GetX()` and `GetY()` get called. + +In Google Mock, if you are not interested in a method, just don't say anything about it. If a call to this method occurs, you'll see a warning in the test output, but it won't be a failure. + +# What Now? # +Congratulations! You've learned enough about Google Mock to start using it. Now, you might want to join the [googlemock](http://groups.google.com/group/googlemock) discussion group and actually write some tests using Google Mock - it will be fun. Hey, it may even be addictive - you've been warned. + +Then, if you feel like increasing your mock quotient, you should move on to the [CookBook](V1_6_CookBook.md). You can learn many advanced features of Google Mock there -- and advance your level of enjoyment and testing bliss. \ No newline at end of file diff --git a/googlemock/docs/v1_6/FrequentlyAskedQuestions.md b/googlemock/docs/v1_6/FrequentlyAskedQuestions.md new file mode 100644 index 0000000..f74715d --- /dev/null +++ b/googlemock/docs/v1_6/FrequentlyAskedQuestions.md @@ -0,0 +1,628 @@ + + +Please send your questions to the +[googlemock](http://groups.google.com/group/googlemock) discussion +group. If you need help with compiler errors, make sure you have +tried [Google Mock Doctor](#How_am_I_supposed_to_make_sense_of_these_horrible_template_error.md) first. + +## When I call a method on my mock object, the method for the real object is invoked instead. What's the problem? ## + +In order for a method to be mocked, it must be _virtual_, unless you use the [high-perf dependency injection technique](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Mocking_Nonvirtual_Methods). + +## I wrote some matchers. After I upgraded to a new version of Google Mock, they no longer compile. What's going on? ## + +After version 1.4.0 of Google Mock was released, we had an idea on how +to make it easier to write matchers that can generate informative +messages efficiently. We experimented with this idea and liked what +we saw. Therefore we decided to implement it. + +Unfortunately, this means that if you have defined your own matchers +by implementing `MatcherInterface` or using `MakePolymorphicMatcher()`, +your definitions will no longer compile. Matchers defined using the +`MATCHER*` family of macros are not affected. + +Sorry for the hassle if your matchers are affected. We believe it's +in everyone's long-term interest to make this change sooner than +later. Fortunately, it's usually not hard to migrate an existing +matcher to the new API. Here's what you need to do: + +If you wrote your matcher like this: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` + +you'll need to change it to: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` +(i.e. rename `Matches()` to `MatchAndExplain()` and give it a second +argument of type `MatchResultListener*`.) + +If you were also using `ExplainMatchResultTo()` to improve the matcher +message: +``` +// Old matcher definition that doesn't work with the lastest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + + virtual void ExplainMatchResultTo(MyType value, + ::std::ostream* os) const { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Foo property is " << value.GetFoo(); + } + ... +}; +``` + +you should move the logic of `ExplainMatchResultTo()` into +`MatchAndExplain()`, using the `MatchResultListener` argument where +the `::std::ostream` was used: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Foo property is " << value.GetFoo(); + return value.GetFoo() > 5; + } + ... +}; +``` + +If your matcher is defined using `MakePolymorphicMatcher()`: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you should rename the `Matches()` method to `MatchAndExplain()` and +add a `MatchResultListener*` argument (the same as what you need to do +for matchers defined by implementing `MatcherInterface`): +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +If your polymorphic matcher uses `ExplainMatchResultTo()` for better +failure messages: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +void ExplainMatchResultTo(const MyGreatMatcher& matcher, + MyType value, + ::std::ostream* os) { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Bar property is " << value.GetBar(); +} +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you'll need to move the logic inside `ExplainMatchResultTo()` to +`MatchAndExplain()`: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Bar property is " << value.GetBar(); + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +For more information, you can read these +[two](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Writing_New_Monomorphic_Matchers) +[recipes](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Writing_New_Polymorphic_Matchers) +from the cookbook. As always, you +are welcome to post questions on `googlemock@googlegroups.com` if you +need any help. + +## When using Google Mock, do I have to use Google Test as the testing framework? I have my favorite testing framework and don't want to switch. ## + +Google Mock works out of the box with Google Test. However, it's easy +to configure it to work with any testing framework of your choice. +[Here](http://code.google.com/p/googlemock/wiki/V1_6_ForDummies#Using_Google_Mock_with_Any_Testing_Framework) is how. + +## How am I supposed to make sense of these horrible template errors? ## + +If you are confused by the compiler errors gcc threw at you, +try consulting the _Google Mock Doctor_ tool first. What it does is to +scan stdin for gcc error messages, and spit out diagnoses on the +problems (we call them diseases) your code has. + +To "install", run command: +``` +alias gmd='/scripts/gmock_doctor.py' +``` + +To use it, do: +``` + 2>&1 | gmd +``` + +For example: +``` +make my_test 2>&1 | gmd +``` + +Or you can run `gmd` and copy-n-paste gcc's error messages to it. + +## Can I mock a variadic function? ## + +You cannot mock a variadic function (i.e. a function taking ellipsis +(`...`) arguments) directly in Google Mock. + +The problem is that in general, there is _no way_ for a mock object to +know how many arguments are passed to the variadic method, and what +the arguments' types are. Only the _author of the base class_ knows +the protocol, and we cannot look into his head. + +Therefore, to mock such a function, the _user_ must teach the mock +object how to figure out the number of arguments and their types. One +way to do it is to provide overloaded versions of the function. + +Ellipsis arguments are inherited from C and not really a C++ feature. +They are unsafe to use and don't work with arguments that have +constructors or destructors. Therefore we recommend to avoid them in +C++ as much as possible. + +## MSVC gives me warning C4301 or C4373 when I define a mock method with a const parameter. Why? ## + +If you compile this using Microsoft Visual C++ 2005 SP1: +``` +class Foo { + ... + virtual void Bar(const int i) = 0; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Bar, void(const int i)); +}; +``` +You may get the following warning: +``` +warning C4301: 'MockFoo::Bar': overriding virtual function only differs from 'Foo::Bar' by const/volatile qualifier +``` + +This is a MSVC bug. The same code compiles fine with gcc ,for +example. If you use Visual C++ 2008 SP1, you would get the warning: +``` +warning C4373: 'MockFoo::Bar': virtual function overrides 'Foo::Bar', previous versions of the compiler did not override when parameters only differed by const/volatile qualifiers +``` + +In C++, if you _declare_ a function with a `const` parameter, the +`const` modifier is _ignored_. Therefore, the `Foo` base class above +is equivalent to: +``` +class Foo { + ... + virtual void Bar(int i) = 0; // int or const int? Makes no difference. +}; +``` + +In fact, you can _declare_ Bar() with an `int` parameter, and _define_ +it with a `const int` parameter. The compiler will still match them +up. + +Since making a parameter `const` is meaningless in the method +_declaration_, we recommend to remove it in both `Foo` and `MockFoo`. +That should workaround the VC bug. + +Note that we are talking about the _top-level_ `const` modifier here. +If the function parameter is passed by pointer or reference, declaring +the _pointee_ or _referee_ as `const` is still meaningful. For +example, the following two declarations are _not_ equivalent: +``` +void Bar(int* p); // Neither p nor *p is const. +void Bar(const int* p); // p is not const, but *p is. +``` + +## I have a huge mock class, and Microsoft Visual C++ runs out of memory when compiling it. What can I do? ## + +We've noticed that when the `/clr` compiler flag is used, Visual C++ +uses 5~6 times as much memory when compiling a mock class. We suggest +to avoid `/clr` when compiling native C++ mocks. + +## I can't figure out why Google Mock thinks my expectations are not satisfied. What should I do? ## + +You might want to run your test with +`--gmock_verbose=info`. This flag lets Google Mock print a trace +of every mock function call it receives. By studying the trace, +you'll gain insights on why the expectations you set are not met. + +## How can I assert that a function is NEVER called? ## + +``` +EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +## I have a failed test where Google Mock tells me TWICE that a particular expectation is not satisfied. Isn't this redundant? ## + +When Google Mock detects a failure, it prints relevant information +(the mock function arguments, the state of relevant expectations, and +etc) to help the user debug. If another failure is detected, Google +Mock will do the same, including printing the state of relevant +expectations. + +Sometimes an expectation's state didn't change between two failures, +and you'll see the same description of the state twice. They are +however _not_ redundant, as they refer to _different points in time_. +The fact they are the same _is_ interesting information. + +## I get a heap check failure when using a mock object, but using a real object is fine. What can be wrong? ## + +Does the class (hopefully a pure interface) you are mocking have a +virtual destructor? + +Whenever you derive from a base class, make sure its destructor is +virtual. Otherwise Bad Things will happen. Consider the following +code: + +``` +class Base { + public: + // Not virtual, but should be. + ~Base() { ... } + ... +}; + +class Derived : public Base { + public: + ... + private: + std::string value_; +}; + +... + Base* p = new Derived; + ... + delete p; // Surprise! ~Base() will be called, but ~Derived() will not + // - value_ is leaked. +``` + +By changing `~Base()` to virtual, `~Derived()` will be correctly +called when `delete p` is executed, and the heap checker +will be happy. + +## The "newer expectations override older ones" rule makes writing expectations awkward. Why does Google Mock do that? ## + +When people complain about this, often they are referring to code like: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. However, I have to write the expectations in the +// reverse order. This sucks big time!!! +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); +``` + +The problem is that they didn't pick the **best** way to express the test's +intent. + +By default, expectations don't have to be matched in _any_ particular +order. If you want them to match in a certain order, you need to be +explicit. This is Google Mock's (and jMock's) fundamental philosophy: it's +easy to accidentally over-specify your tests, and we want to make it +harder to do so. + +There are two better ways to write the test spec. You could either +put the expectations in sequence: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. Using a sequence, we can write the expectations +// in their natural order. +{ + InSequence s; + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +} +``` + +or you can put the sequence of actions in the same expectation: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +``` + +Back to the original questions: why does Google Mock search the +expectations (and `ON_CALL`s) from back to front? Because this +allows a user to set up a mock's behavior for the common case early +(e.g. in the mock's constructor or the test fixture's set-up phase) +and customize it with more specific rules later. If Google Mock +searches from front to back, this very useful pattern won't be +possible. + +## Google Mock prints a warning when a function without EXPECT\_CALL is called, even if I have set its behavior using ON\_CALL. Would it be reasonable not to show the warning in this case? ## + +When choosing between being neat and being safe, we lean toward the +latter. So the answer is that we think it's better to show the +warning. + +Often people write `ON_CALL`s in the mock object's +constructor or `SetUp()`, as the default behavior rarely changes from +test to test. Then in the test body they set the expectations, which +are often different for each test. Having an `ON_CALL` in the set-up +part of a test doesn't mean that the calls are expected. If there's +no `EXPECT_CALL` and the method is called, it's possibly an error. If +we quietly let the call go through without notifying the user, bugs +may creep in unnoticed. + +If, however, you are sure that the calls are OK, you can write + +``` +EXPECT_CALL(foo, Bar(_)) + .WillRepeatedly(...); +``` + +instead of + +``` +ON_CALL(foo, Bar(_)) + .WillByDefault(...); +``` + +This tells Google Mock that you do expect the calls and no warning should be +printed. + +Also, you can control the verbosity using the `--gmock_verbose` flag. +If you find the output too noisy when debugging, just choose a less +verbose level. + +## How can I delete the mock function's argument in an action? ## + +If you find yourself needing to perform some action that's not +supported by Google Mock directly, remember that you can define your own +actions using +[MakeAction()](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Writing_New_Actions) or +[MakePolymorphicAction()](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Writing_New_Polymorphic_Actions), +or you can write a stub function and invoke it using +[Invoke()](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Using_Functions_Methods_Functors). + +## MOCK\_METHODn()'s second argument looks funny. Why don't you use the MOCK\_METHODn(Method, return\_type, arg\_1, ..., arg\_n) syntax? ## + +What?! I think it's beautiful. :-) + +While which syntax looks more natural is a subjective matter to some +extent, Google Mock's syntax was chosen for several practical advantages it +has. + +Try to mock a function that takes a map as an argument: +``` +virtual int GetSize(const map& m); +``` + +Using the proposed syntax, it would be: +``` +MOCK_METHOD1(GetSize, int, const map& m); +``` + +Guess what? You'll get a compiler error as the compiler thinks that +`const map& m` are **two**, not one, arguments. To work +around this you can use `typedef` to give the map type a name, but +that gets in the way of your work. Google Mock's syntax avoids this +problem as the function's argument types are protected inside a pair +of parentheses: +``` +// This compiles fine. +MOCK_METHOD1(GetSize, int(const map& m)); +``` + +You still need a `typedef` if the return type contains an unprotected +comma, but that's much rarer. + +Other advantages include: + 1. `MOCK_METHOD1(Foo, int, bool)` can leave a reader wonder whether the method returns `int` or `bool`, while there won't be such confusion using Google Mock's syntax. + 1. The way Google Mock describes a function type is nothing new, although many people may not be familiar with it. The same syntax was used in C, and the `function` library in `tr1` uses this syntax extensively. Since `tr1` will become a part of the new version of STL, we feel very comfortable to be consistent with it. + 1. The function type syntax is also used in other parts of Google Mock's API (e.g. the action interface) in order to make the implementation tractable. A user needs to learn it anyway in order to utilize Google Mock's more advanced features. We'd as well stick to the same syntax in `MOCK_METHOD*`! + +## My code calls a static/global function. Can I mock it? ## + +You can, but you need to make some changes. + +In general, if you find yourself needing to mock a static function, +it's a sign that your modules are too tightly coupled (and less +flexible, less reusable, less testable, etc). You are probably better +off defining a small interface and call the function through that +interface, which then can be easily mocked. It's a bit of work +initially, but usually pays for itself quickly. + +This Google Testing Blog +[post](http://googletesting.blogspot.com/2008/06/defeat-static-cling.html) +says it excellently. Check it out. + +## My mock object needs to do complex stuff. It's a lot of pain to specify the actions. Google Mock sucks! ## + +I know it's not a question, but you get an answer for free any way. :-) + +With Google Mock, you can create mocks in C++ easily. And people might be +tempted to use them everywhere. Sometimes they work great, and +sometimes you may find them, well, a pain to use. So, what's wrong in +the latter case? + +When you write a test without using mocks, you exercise the code and +assert that it returns the correct value or that the system is in an +expected state. This is sometimes called "state-based testing". + +Mocks are great for what some call "interaction-based" testing: +instead of checking the system state at the very end, mock objects +verify that they are invoked the right way and report an error as soon +as it arises, giving you a handle on the precise context in which the +error was triggered. This is often more effective and economical to +do than state-based testing. + +If you are doing state-based testing and using a test double just to +simulate the real object, you are probably better off using a fake. +Using a mock in this case causes pain, as it's not a strong point for +mocks to perform complex actions. If you experience this and think +that mocks suck, you are just not using the right tool for your +problem. Or, you might be trying to solve the wrong problem. :-) + +## I got a warning "Uninteresting function call encountered - default action taken.." Should I panic? ## + +By all means, NO! It's just an FYI. + +What it means is that you have a mock function, you haven't set any +expectations on it (by Google Mock's rule this means that you are not +interested in calls to this function and therefore it can be called +any number of times), and it is called. That's OK - you didn't say +it's not OK to call the function! + +What if you actually meant to disallow this function to be called, but +forgot to write `EXPECT_CALL(foo, Bar()).Times(0)`? While +one can argue that it's the user's fault, Google Mock tries to be nice and +prints you a note. + +So, when you see the message and believe that there shouldn't be any +uninteresting calls, you should investigate what's going on. To make +your life easier, Google Mock prints the function name and arguments +when an uninteresting call is encountered. + +## I want to define a custom action. Should I use Invoke() or implement the action interface? ## + +Either way is fine - you want to choose the one that's more convenient +for your circumstance. + +Usually, if your action is for a particular function type, defining it +using `Invoke()` should be easier; if your action can be used in +functions of different types (e.g. if you are defining +`Return(value)`), `MakePolymorphicAction()` is +easiest. Sometimes you want precise control on what types of +functions the action can be used in, and implementing +`ActionInterface` is the way to go here. See the implementation of +`Return()` in `include/gmock/gmock-actions.h` for an example. + +## I'm using the set-argument-pointee action, and the compiler complains about "conflicting return type specified". What does it mean? ## + +You got this error as Google Mock has no idea what value it should return +when the mock method is called. `SetArgPointee()` says what the +side effect is, but doesn't say what the return value should be. You +need `DoAll()` to chain a `SetArgPointee()` with a `Return()`. + +See this [recipe](http://code.google.com/p/googlemock/wiki/V1_6_CookBook#Mocking_Side_Effects) for more details and an example. + + +## My question is not in your FAQ! ## + +If you cannot find the answer to your question in this FAQ, there are +some other resources you can use: + + 1. read other [wiki pages](http://code.google.com/p/googlemock/w/list), + 1. search the mailing list [archive](http://groups.google.com/group/googlemock/topics), + 1. ask it on [googlemock@googlegroups.com](mailto:googlemock@googlegroups.com) and someone will answer it (to prevent spam, we require you to join the [discussion group](http://groups.google.com/group/googlemock) before you can post.). + +Please note that creating an issue in the +[issue tracker](http://code.google.com/p/googlemock/issues/list) is _not_ +a good way to get your answer, as it is monitored infrequently by a +very small number of people. + +When asking a question, it's helpful to provide as much of the +following information as possible (people cannot help you if there's +not enough information in your question): + + * the version (or the revision number if you check out from SVN directly) of Google Mock you use (Google Mock is under active development, so it's possible that your problem has been solved in a later version), + * your operating system, + * the name and version of your compiler, + * the complete command line flags you give to your compiler, + * the complete compiler error messages (if the question is about compilation), + * the _actual_ code (ideally, a minimal but complete program) that has the problem you encounter. \ No newline at end of file diff --git a/googlemock/docs/v1_7/CheatSheet.md b/googlemock/docs/v1_7/CheatSheet.md new file mode 100644 index 0000000..db421e5 --- /dev/null +++ b/googlemock/docs/v1_7/CheatSheet.md @@ -0,0 +1,556 @@ + + +# Defining a Mock Class # + +## Mocking a Normal Class ## + +Given +``` +class Foo { + ... + virtual ~Foo(); + virtual int GetSize() const = 0; + virtual string Describe(const char* name) = 0; + virtual string Describe(int type) = 0; + virtual bool Process(Bar elem, int count) = 0; +}; +``` +(note that `~Foo()` **must** be virtual) we can define its mock as +``` +#include "gmock/gmock.h" + +class MockFoo : public Foo { + MOCK_CONST_METHOD0(GetSize, int()); + MOCK_METHOD1(Describe, string(const char* name)); + MOCK_METHOD1(Describe, string(int type)); + MOCK_METHOD2(Process, bool(Bar elem, int count)); +}; +``` + +To create a "nice" mock object which ignores all uninteresting calls, +or a "strict" mock object, which treats them as failures: +``` +NiceMock nice_foo; // The type is a subclass of MockFoo. +StrictMock strict_foo; // The type is a subclass of MockFoo. +``` + +## Mocking a Class Template ## + +To mock +``` +template +class StackInterface { + public: + ... + virtual ~StackInterface(); + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; +``` +(note that `~StackInterface()` **must** be virtual) just append `_T` to the `MOCK_*` macros: +``` +template +class MockStack : public StackInterface { + public: + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Specifying Calling Conventions for Mock Functions ## + +If your mock function doesn't use the default calling convention, you +can specify it by appending `_WITH_CALLTYPE` to any of the macros +described in the previous two sections and supplying the calling +convention as the first argument to the macro. For example, +``` + MOCK_METHOD_1_WITH_CALLTYPE(STDMETHODCALLTYPE, Foo, bool(int n)); + MOCK_CONST_METHOD2_WITH_CALLTYPE(STDMETHODCALLTYPE, Bar, int(double x, double y)); +``` +where `STDMETHODCALLTYPE` is defined by `` on Windows. + +# Using Mocks in Tests # + +The typical flow is: + 1. Import the Google Mock names you need to use. All Google Mock names are in the `testing` namespace unless they are macros or otherwise noted. + 1. Create the mock objects. + 1. Optionally, set the default actions of the mock objects. + 1. Set your expectations on the mock objects (How will they be called? What wil they do?). + 1. Exercise code that uses the mock objects; if necessary, check the result using [Google Test](http://code.google.com/p/googletest/) assertions. + 1. When a mock objects is destructed, Google Mock automatically verifies that all expectations on it have been satisfied. + +Here is an example: +``` +using ::testing::Return; // #1 + +TEST(BarTest, DoesThis) { + MockFoo foo; // #2 + + ON_CALL(foo, GetSize()) // #3 + .WillByDefault(Return(1)); + // ... other default actions ... + + EXPECT_CALL(foo, Describe(5)) // #4 + .Times(3) + .WillRepeatedly(Return("Category 5")); + // ... other expectations ... + + EXPECT_EQ("good", MyProductionFunction(&foo)); // #5 +} // #6 +``` + +# Setting Default Actions # + +Google Mock has a **built-in default action** for any function that +returns `void`, `bool`, a numeric value, or a pointer. + +To customize the default action for functions with return type `T` globally: +``` +using ::testing::DefaultValue; + +DefaultValue::Set(value); // Sets the default value to be returned. +// ... use the mocks ... +DefaultValue::Clear(); // Resets the default value. +``` + +To customize the default action for a particular method, use `ON_CALL()`: +``` +ON_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .WillByDefault(action); +``` + +# Setting Expectations # + +`EXPECT_CALL()` sets **expectations** on a mock method (How will it be +called? What will it do?): +``` +EXPECT_CALL(mock_object, method(matchers)) + .With(multi_argument_matcher) ? + .Times(cardinality) ? + .InSequence(sequences) * + .After(expectations) * + .WillOnce(action) * + .WillRepeatedly(action) ? + .RetiresOnSaturation(); ? +``` + +If `Times()` is omitted, the cardinality is assumed to be: + + * `Times(1)` when there is neither `WillOnce()` nor `WillRepeatedly()`; + * `Times(n)` when there are `n WillOnce()`s but no `WillRepeatedly()`, where `n` >= 1; or + * `Times(AtLeast(n))` when there are `n WillOnce()`s and a `WillRepeatedly()`, where `n` >= 0. + +A method with no `EXPECT_CALL()` is free to be invoked _any number of times_, and the default action will be taken each time. + +# Matchers # + +A **matcher** matches a _single_ argument. You can use it inside +`ON_CALL()` or `EXPECT_CALL()`, or use it to validate a value +directly: + +| `EXPECT_THAT(value, matcher)` | Asserts that `value` matches `matcher`. | +|:------------------------------|:----------------------------------------| +| `ASSERT_THAT(value, matcher)` | The same as `EXPECT_THAT(value, matcher)`, except that it generates a **fatal** failure. | + +Built-in matchers (where `argument` is the function argument) are +divided into several categories: + +## Wildcard ## +|`_`|`argument` can be any value of the correct type.| +|:--|:-----------------------------------------------| +|`A()` or `An()`|`argument` can be any value of type `type`. | + +## Generic Comparison ## + +|`Eq(value)` or `value`|`argument == value`| +|:---------------------|:------------------| +|`Ge(value)` |`argument >= value`| +|`Gt(value)` |`argument > value` | +|`Le(value)` |`argument <= value`| +|`Lt(value)` |`argument < value` | +|`Ne(value)` |`argument != value`| +|`IsNull()` |`argument` is a `NULL` pointer (raw or smart).| +|`NotNull()` |`argument` is a non-null pointer (raw or smart).| +|`Ref(variable)` |`argument` is a reference to `variable`.| +|`TypedEq(value)`|`argument` has type `type` and is equal to `value`. You may need to use this instead of `Eq(value)` when the mock function is overloaded.| + +Except `Ref()`, these matchers make a _copy_ of `value` in case it's +modified or destructed later. If the compiler complains that `value` +doesn't have a public copy constructor, try wrap it in `ByRef()`, +e.g. `Eq(ByRef(non_copyable_value))`. If you do that, make sure +`non_copyable_value` is not changed afterwards, or the meaning of your +matcher will be changed. + +## Floating-Point Matchers ## + +|`DoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as unequal.| +|:-------------------|:----------------------------------------------------------------------------------------------| +|`FloatEq(a_float)` |`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as unequal. | +|`NanSensitiveDoubleEq(a_double)`|`argument` is a `double` value approximately equal to `a_double`, treating two NaNs as equal. | +|`NanSensitiveFloatEq(a_float)`|`argument` is a `float` value approximately equal to `a_float`, treating two NaNs as equal. | + +The above matchers use ULP-based comparison (the same as used in +[Google Test](http://code.google.com/p/googletest/)). They +automatically pick a reasonable error bound based on the absolute +value of the expected value. `DoubleEq()` and `FloatEq()` conform to +the IEEE standard, which requires comparing two NaNs for equality to +return false. The `NanSensitive*` version instead treats two NaNs as +equal, which is often what a user wants. + +|`DoubleNear(a_double, max_abs_error)`|`argument` is a `double` value close to `a_double` (absolute error <= `max_abs_error`), treating two NaNs as unequal.| +|:------------------------------------|:--------------------------------------------------------------------------------------------------------------------| +|`FloatNear(a_float, max_abs_error)` |`argument` is a `float` value close to `a_float` (absolute error <= `max_abs_error`), treating two NaNs as unequal. | +|`NanSensitiveDoubleNear(a_double, max_abs_error)`|`argument` is a `double` value close to `a_double` (absolute error <= `max_abs_error`), treating two NaNs as equal. | +|`NanSensitiveFloatNear(a_float, max_abs_error)`|`argument` is a `float` value close to `a_float` (absolute error <= `max_abs_error`), treating two NaNs as equal. | + +## String Matchers ## + +The `argument` can be either a C string or a C++ string object: + +|`ContainsRegex(string)`|`argument` matches the given regular expression.| +|:----------------------|:-----------------------------------------------| +|`EndsWith(suffix)` |`argument` ends with string `suffix`. | +|`HasSubstr(string)` |`argument` contains `string` as a sub-string. | +|`MatchesRegex(string)` |`argument` matches the given regular expression with the match starting at the first character and ending at the last character.| +|`StartsWith(prefix)` |`argument` starts with string `prefix`. | +|`StrCaseEq(string)` |`argument` is equal to `string`, ignoring case. | +|`StrCaseNe(string)` |`argument` is not equal to `string`, ignoring case.| +|`StrEq(string)` |`argument` is equal to `string`. | +|`StrNe(string)` |`argument` is not equal to `string`. | + +`ContainsRegex()` and `MatchesRegex()` use the regular expression +syntax defined +[here](http://code.google.com/p/googletest/wiki/AdvancedGuide#Regular_Expression_Syntax). +`StrCaseEq()`, `StrCaseNe()`, `StrEq()`, and `StrNe()` work for wide +strings as well. + +## Container Matchers ## + +Most STL-style containers support `==`, so you can use +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. If you want to write the elements in-line, +match them more flexibly, or get more informative messages, you can use: + +| `ContainerEq(container)` | The same as `Eq(container)` except that the failure message also includes which elements are in one container but not the other. | +|:-------------------------|:---------------------------------------------------------------------------------------------------------------------------------| +| `Contains(e)` | `argument` contains an element that matches `e`, which can be either a value or a matcher. | +| `Each(e)` | `argument` is a container where _every_ element matches `e`, which can be either a value or a matcher. | +| `ElementsAre(e0, e1, ..., en)` | `argument` has `n + 1` elements, where the i-th element matches `ei`, which can be a value or a matcher. 0 to 10 arguments are allowed. | +| `ElementsAreArray({ e0, e1, ..., en })`, `ElementsAreArray(array)`, or `ElementsAreArray(array, count)` | The same as `ElementsAre()` except that the expected element values/matchers come from an initializer list, vector, or C-style array. | +| `IsEmpty()` | `argument` is an empty container (`container.empty()`). | +| `Pointwise(m, container)` | `argument` contains the same number of elements as in `container`, and for all i, (the i-th element in `argument`, the i-th element in `container`) match `m`, which is a matcher on 2-tuples. E.g. `Pointwise(Le(), upper_bounds)` verifies that each element in `argument` doesn't exceed the corresponding element in `upper_bounds`. See more detail below. | +| `SizeIs(m)` | `argument` is a container whose size matches `m`. E.g. `SizeIs(2)` or `SizeIs(Lt(2))`. | +| `UnorderedElementsAre(e0, e1, ..., en)` | `argument` has `n + 1` elements, and under some permutation each element matches an `ei` (for a different `i`), which can be a value or a matcher. 0 to 10 arguments are allowed. | +| `UnorderedElementsAreArray({ e0, e1, ..., en })`, `UnorderedElementsAreArray(array)`, or `UnorderedElementsAreArray(array, count)` | The same as `UnorderedElementsAre()` except that the expected element values/matchers come from an initializer list, vector, or C-style array. | +| `WhenSorted(m)` | When `argument` is sorted using the `<` operator, it matches container matcher `m`. E.g. `WhenSorted(UnorderedElementsAre(1, 2, 3))` verifies that `argument` contains elements `1`, `2`, and `3`, ignoring order. | +| `WhenSortedBy(comparator, m)` | The same as `WhenSorted(m)`, except that the given comparator instead of `<` is used to sort `argument`. E.g. `WhenSortedBy(std::greater(), ElementsAre(3, 2, 1))`. | + +Notes: + + * These matchers can also match: + 1. a native array passed by reference (e.g. in `Foo(const int (&a)[5])`), and + 1. an array passed as a pointer and a count (e.g. in `Bar(const T* buffer, int len)` -- see [Multi-argument Matchers](#Multiargument_Matchers.md)). + * The array being matched may be multi-dimensional (i.e. its elements can be arrays). + * `m` in `Pointwise(m, ...)` should be a matcher for `std::tr1::tuple` where `T` and `U` are the element type of the actual container and the expected container, respectively. For example, to compare two `Foo` containers where `Foo` doesn't support `operator==` but has an `Equals()` method, one might write: + +``` +using ::std::tr1::get; +MATCHER(FooEq, "") { + return get<0>(arg).Equals(get<1>(arg)); +} +... +EXPECT_THAT(actual_foos, Pointwise(FooEq(), expected_foos)); +``` + +## Member Matchers ## + +|`Field(&class::field, m)`|`argument.field` (or `argument->field` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| +|:------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------| +|`Key(e)` |`argument.first` matches `e`, which can be either a value or a matcher. E.g. `Contains(Key(Le(5)))` can verify that a `map` contains a key `<= 5`.| +|`Pair(m1, m2)` |`argument` is an `std::pair` whose `first` field matches `m1` and `second` field matches `m2`. | +|`Property(&class::property, m)`|`argument.property()` (or `argument->property()` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_.| + +## Matching the Result of a Function or Functor ## + +|`ResultOf(f, m)`|`f(argument)` matches matcher `m`, where `f` is a function or functor.| +|:---------------|:---------------------------------------------------------------------| + +## Pointer Matchers ## + +|`Pointee(m)`|`argument` (either a smart pointer or a raw pointer) points to a value that matches matcher `m`.| +|:-----------|:-----------------------------------------------------------------------------------------------| + +## Multiargument Matchers ## + +Technically, all matchers match a _single_ value. A "multi-argument" +matcher is just one that matches a _tuple_. The following matchers can +be used to match a tuple `(x, y)`: + +|`Eq()`|`x == y`| +|:-----|:-------| +|`Ge()`|`x >= y`| +|`Gt()`|`x > y` | +|`Le()`|`x <= y`| +|`Lt()`|`x < y` | +|`Ne()`|`x != y`| + +You can use the following selectors to pick a subset of the arguments +(or reorder them) to participate in the matching: + +|`AllArgs(m)`|Equivalent to `m`. Useful as syntactic sugar in `.With(AllArgs(m))`.| +|:-----------|:-------------------------------------------------------------------| +|`Args(m)`|The tuple of the `k` selected (using 0-based indices) arguments matches `m`, e.g. `Args<1, 2>(Eq())`.| + +## Composite Matchers ## + +You can make a matcher from one or more other matchers: + +|`AllOf(m1, m2, ..., mn)`|`argument` matches all of the matchers `m1` to `mn`.| +|:-----------------------|:---------------------------------------------------| +|`AnyOf(m1, m2, ..., mn)`|`argument` matches at least one of the matchers `m1` to `mn`.| +|`Not(m)` |`argument` doesn't match matcher `m`. | + +## Adapters for Matchers ## + +|`MatcherCast(m)`|casts matcher `m` to type `Matcher`.| +|:------------------|:--------------------------------------| +|`SafeMatcherCast(m)`| [safely casts](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Casting_Matchers) matcher `m` to type `Matcher`. | +|`Truly(predicate)` |`predicate(argument)` returns something considered by C++ to be true, where `predicate` is a function or functor.| + +## Matchers as Predicates ## + +|`Matches(m)(value)`|evaluates to `true` if `value` matches `m`. You can use `Matches(m)` alone as a unary functor.| +|:------------------|:---------------------------------------------------------------------------------------------| +|`ExplainMatchResult(m, value, result_listener)`|evaluates to `true` if `value` matches `m`, explaining the result to `result_listener`. | +|`Value(value, m)` |evaluates to `true` if `value` matches `m`. | + +## Defining Matchers ## + +| `MATCHER(IsEven, "") { return (arg % 2) == 0; }` | Defines a matcher `IsEven()` to match an even number. | +|:-------------------------------------------------|:------------------------------------------------------| +| `MATCHER_P(IsDivisibleBy, n, "") { *result_listener << "where the remainder is " << (arg % n); return (arg % n) == 0; }` | Defines a macher `IsDivisibleBy(n)` to match a number divisible by `n`. | +| `MATCHER_P2(IsBetween, a, b, std::string(negation ? "isn't" : "is") + " between " + PrintToString(a) + " and " + PrintToString(b)) { return a <= arg && arg <= b; }` | Defines a matcher `IsBetween(a, b)` to match a value in the range [`a`, `b`]. | + +**Notes:** + + 1. The `MATCHER*` macros cannot be used inside a function or class. + 1. The matcher body must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). + 1. You can use `PrintToString(x)` to convert a value `x` of any type to a string. + +## Matchers as Test Assertions ## + +|`ASSERT_THAT(expression, m)`|Generates a [fatal failure](http://code.google.com/p/googletest/wiki/Primer#Assertions) if the value of `expression` doesn't match matcher `m`.| +|:---------------------------|:----------------------------------------------------------------------------------------------------------------------------------------------| +|`EXPECT_THAT(expression, m)`|Generates a non-fatal failure if the value of `expression` doesn't match matcher `m`. | + +# Actions # + +**Actions** specify what a mock function should do when invoked. + +## Returning a Value ## + +|`Return()`|Return from a `void` mock function.| +|:---------|:----------------------------------| +|`Return(value)`|Return `value`. If the type of `value` is different to the mock function's return type, `value` is converted to the latter type at the time the expectation is set, not when the action is executed.| +|`ReturnArg()`|Return the `N`-th (0-based) argument.| +|`ReturnNew(a1, ..., ak)`|Return `new T(a1, ..., ak)`; a different object is created each time.| +|`ReturnNull()`|Return a null pointer. | +|`ReturnPointee(ptr)`|Return the value pointed to by `ptr`.| +|`ReturnRef(variable)`|Return a reference to `variable`. | +|`ReturnRefOfCopy(value)`|Return a reference to a copy of `value`; the copy lives as long as the action.| + +## Side Effects ## + +|`Assign(&variable, value)`|Assign `value` to variable.| +|:-------------------------|:--------------------------| +| `DeleteArg()` | Delete the `N`-th (0-based) argument, which must be a pointer. | +| `SaveArg(pointer)` | Save the `N`-th (0-based) argument to `*pointer`. | +| `SaveArgPointee(pointer)` | Save the value pointed to by the `N`-th (0-based) argument to `*pointer`. | +| `SetArgReferee(value)` | Assign value to the variable referenced by the `N`-th (0-based) argument. | +|`SetArgPointee(value)` |Assign `value` to the variable pointed by the `N`-th (0-based) argument.| +|`SetArgumentPointee(value)`|Same as `SetArgPointee(value)`. Deprecated. Will be removed in v1.7.0.| +|`SetArrayArgument(first, last)`|Copies the elements in source range [`first`, `last`) to the array pointed to by the `N`-th (0-based) argument, which can be either a pointer or an iterator. The action does not take ownership of the elements in the source range.| +|`SetErrnoAndReturn(error, value)`|Set `errno` to `error` and return `value`.| +|`Throw(exception)` |Throws the given exception, which can be any copyable value. Available since v1.1.0.| + +## Using a Function or a Functor as an Action ## + +|`Invoke(f)`|Invoke `f` with the arguments passed to the mock function, where `f` can be a global/static function or a functor.| +|:----------|:-----------------------------------------------------------------------------------------------------------------| +|`Invoke(object_pointer, &class::method)`|Invoke the {method on the object with the arguments passed to the mock function. | +|`InvokeWithoutArgs(f)`|Invoke `f`, which can be a global/static function or a functor. `f` must take no arguments. | +|`InvokeWithoutArgs(object_pointer, &class::method)`|Invoke the method on the object, which takes no arguments. | +|`InvokeArgument(arg1, arg2, ..., argk)`|Invoke the mock function's `N`-th (0-based) argument, which must be a function or a functor, with the `k` arguments.| + +The return value of the invoked function is used as the return value +of the action. + +When defining a function or functor to be used with `Invoke*()`, you can declare any unused parameters as `Unused`: +``` + double Distance(Unused, double x, double y) { return sqrt(x*x + y*y); } + ... + EXPECT_CALL(mock, Foo("Hi", _, _)).WillOnce(Invoke(Distance)); +``` + +In `InvokeArgument(...)`, if an argument needs to be passed by reference, wrap it inside `ByRef()`. For example, +``` + InvokeArgument<2>(5, string("Hi"), ByRef(foo)) +``` +calls the mock function's #2 argument, passing to it `5` and `string("Hi")` by value, and `foo` by reference. + +## Default Action ## + +|`DoDefault()`|Do the default action (specified by `ON_CALL()` or the built-in one).| +|:------------|:--------------------------------------------------------------------| + +**Note:** due to technical reasons, `DoDefault()` cannot be used inside a composite action - trying to do so will result in a run-time error. + +## Composite Actions ## + +|`DoAll(a1, a2, ..., an)`|Do all actions `a1` to `an` and return the result of `an` in each invocation. The first `n - 1` sub-actions must return void. | +|:-----------------------|:-----------------------------------------------------------------------------------------------------------------------------| +|`IgnoreResult(a)` |Perform action `a` and ignore its result. `a` must not return void. | +|`WithArg(a)` |Pass the `N`-th (0-based) argument of the mock function to action `a` and perform it. | +|`WithArgs(a)`|Pass the selected (0-based) arguments of the mock function to action `a` and perform it. | +|`WithoutArgs(a)` |Perform action `a` without any arguments. | + +## Defining Actions ## + +| `ACTION(Sum) { return arg0 + arg1; }` | Defines an action `Sum()` to return the sum of the mock function's argument #0 and #1. | +|:--------------------------------------|:---------------------------------------------------------------------------------------| +| `ACTION_P(Plus, n) { return arg0 + n; }` | Defines an action `Plus(n)` to return the sum of the mock function's argument #0 and `n`. | +| `ACTION_Pk(Foo, p1, ..., pk) { statements; }` | Defines a parameterized action `Foo(p1, ..., pk)` to execute the given `statements`. | + +The `ACTION*` macros cannot be used inside a function or class. + +# Cardinalities # + +These are used in `Times()` to specify how many times a mock function will be called: + +|`AnyNumber()`|The function can be called any number of times.| +|:------------|:----------------------------------------------| +|`AtLeast(n)` |The call is expected at least `n` times. | +|`AtMost(n)` |The call is expected at most `n` times. | +|`Between(m, n)`|The call is expected between `m` and `n` (inclusive) times.| +|`Exactly(n) or n`|The call is expected exactly `n` times. In particular, the call should never happen when `n` is 0.| + +# Expectation Order # + +By default, the expectations can be matched in _any_ order. If some +or all expectations must be matched in a given order, there are two +ways to specify it. They can be used either independently or +together. + +## The After Clause ## + +``` +using ::testing::Expectation; +... +Expectation init_x = EXPECT_CALL(foo, InitX()); +Expectation init_y = EXPECT_CALL(foo, InitY()); +EXPECT_CALL(foo, Bar()) + .After(init_x, init_y); +``` +says that `Bar()` can be called only after both `InitX()` and +`InitY()` have been called. + +If you don't know how many pre-requisites an expectation has when you +write it, you can use an `ExpectationSet` to collect them: + +``` +using ::testing::ExpectationSet; +... +ExpectationSet all_inits; +for (int i = 0; i < element_count; i++) { + all_inits += EXPECT_CALL(foo, InitElement(i)); +} +EXPECT_CALL(foo, Bar()) + .After(all_inits); +``` +says that `Bar()` can be called only after all elements have been +initialized (but we don't care about which elements get initialized +before the others). + +Modifying an `ExpectationSet` after using it in an `.After()` doesn't +affect the meaning of the `.After()`. + +## Sequences ## + +When you have a long chain of sequential expectations, it's easier to +specify the order using **sequences**, which don't require you to given +each expectation in the chain a different name. All expected
+calls in the same sequence must occur in the order they are +specified. + +``` +using ::testing::Sequence; +Sequence s1, s2; +... +EXPECT_CALL(foo, Reset()) + .InSequence(s1, s2) + .WillOnce(Return(true)); +EXPECT_CALL(foo, GetSize()) + .InSequence(s1) + .WillOnce(Return(1)); +EXPECT_CALL(foo, Describe(A())) + .InSequence(s2) + .WillOnce(Return("dummy")); +``` +says that `Reset()` must be called before _both_ `GetSize()` _and_ +`Describe()`, and the latter two can occur in any order. + +To put many expectations in a sequence conveniently: +``` +using ::testing::InSequence; +{ + InSequence dummy; + + EXPECT_CALL(...)...; + EXPECT_CALL(...)...; + ... + EXPECT_CALL(...)...; +} +``` +says that all expected calls in the scope of `dummy` must occur in +strict order. The name `dummy` is irrelevant.) + +# Verifying and Resetting a Mock # + +Google Mock will verify the expectations on a mock object when it is destructed, or you can do it earlier: +``` +using ::testing::Mock; +... +// Verifies and removes the expectations on mock_obj; +// returns true iff successful. +Mock::VerifyAndClearExpectations(&mock_obj); +... +// Verifies and removes the expectations on mock_obj; +// also removes the default actions set by ON_CALL(); +// returns true iff successful. +Mock::VerifyAndClear(&mock_obj); +``` + +You can also tell Google Mock that a mock object can be leaked and doesn't +need to be verified: +``` +Mock::AllowLeak(&mock_obj); +``` + +# Mock Classes # + +Google Mock defines a convenient mock class template +``` +class MockFunction { + public: + MOCK_METHODn(Call, R(A1, ..., An)); +}; +``` +See this [recipe](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Using_Check_Points) for one application of it. + +# Flags # + +| `--gmock_catch_leaked_mocks=0` | Don't report leaked mock objects as failures. | +|:-------------------------------|:----------------------------------------------| +| `--gmock_verbose=LEVEL` | Sets the default verbosity level (`info`, `warning`, or `error`) of Google Mock messages. | \ No newline at end of file diff --git a/googlemock/docs/v1_7/CookBook.md b/googlemock/docs/v1_7/CookBook.md new file mode 100644 index 0000000..419a001 --- /dev/null +++ b/googlemock/docs/v1_7/CookBook.md @@ -0,0 +1,3432 @@ + + +You can find recipes for using Google Mock here. If you haven't yet, +please read the [ForDummies](V1_7_ForDummies.md) document first to make sure you understand +the basics. + +**Note:** Google Mock lives in the `testing` name space. For +readability, it is recommended to write `using ::testing::Foo;` once in +your file before using the name `Foo` defined by Google Mock. We omit +such `using` statements in this page for brevity, but you should do it +in your own code. + +# Creating Mock Classes # + +## Mocking Private or Protected Methods ## + +You must always put a mock method definition (`MOCK_METHOD*`) in a +`public:` section of the mock class, regardless of the method being +mocked being `public`, `protected`, or `private` in the base class. +This allows `ON_CALL` and `EXPECT_CALL` to reference the mock function +from outside of the mock class. (Yes, C++ allows a subclass to change +the access level of a virtual function in the base class.) Example: + +``` +class Foo { + public: + ... + virtual bool Transform(Gadget* g) = 0; + + protected: + virtual void Resume(); + + private: + virtual int GetTimeOut(); +}; + +class MockFoo : public Foo { + public: + ... + MOCK_METHOD1(Transform, bool(Gadget* g)); + + // The following must be in the public section, even though the + // methods are protected or private in the base class. + MOCK_METHOD0(Resume, void()); + MOCK_METHOD0(GetTimeOut, int()); +}; +``` + +## Mocking Overloaded Methods ## + +You can mock overloaded functions as usual. No special attention is required: + +``` +class Foo { + ... + + // Must be virtual as we'll inherit from Foo. + virtual ~Foo(); + + // Overloaded on the types and/or numbers of arguments. + virtual int Add(Element x); + virtual int Add(int times, Element x); + + // Overloaded on the const-ness of this object. + virtual Bar& GetBar(); + virtual const Bar& GetBar() const; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Add, int(Element x)); + MOCK_METHOD2(Add, int(int times, Element x); + + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +``` + +**Note:** if you don't mock all versions of the overloaded method, the +compiler will give you a warning about some methods in the base class +being hidden. To fix that, use `using` to bring them in scope: + +``` +class MockFoo : public Foo { + ... + using Foo::Add; + MOCK_METHOD1(Add, int(Element x)); + // We don't want to mock int Add(int times, Element x); + ... +}; +``` + +## Mocking Class Templates ## + +To mock a class template, append `_T` to the `MOCK_*` macros: + +``` +template +class StackInterface { + ... + // Must be virtual as we'll inherit from StackInterface. + virtual ~StackInterface(); + + virtual int GetSize() const = 0; + virtual void Push(const Elem& x) = 0; +}; + +template +class MockStack : public StackInterface { + ... + MOCK_CONST_METHOD0_T(GetSize, int()); + MOCK_METHOD1_T(Push, void(const Elem& x)); +}; +``` + +## Mocking Nonvirtual Methods ## + +Google Mock can mock non-virtual functions to be used in what we call _hi-perf +dependency injection_. + +In this case, instead of sharing a common base class with the real +class, your mock class will be _unrelated_ to the real class, but +contain methods with the same signatures. The syntax for mocking +non-virtual methods is the _same_ as mocking virtual methods: + +``` +// A simple packet stream class. None of its members is virtual. +class ConcretePacketStream { + public: + void AppendPacket(Packet* new_packet); + const Packet* GetPacket(size_t packet_number) const; + size_t NumberOfPackets() const; + ... +}; + +// A mock packet stream class. It inherits from no other, but defines +// GetPacket() and NumberOfPackets(). +class MockPacketStream { + public: + MOCK_CONST_METHOD1(GetPacket, const Packet*(size_t packet_number)); + MOCK_CONST_METHOD0(NumberOfPackets, size_t()); + ... +}; +``` + +Note that the mock class doesn't define `AppendPacket()`, unlike the +real class. That's fine as long as the test doesn't need to call it. + +Next, you need a way to say that you want to use +`ConcretePacketStream` in production code, and use `MockPacketStream` +in tests. Since the functions are not virtual and the two classes are +unrelated, you must specify your choice at _compile time_ (as opposed +to run time). + +One way to do it is to templatize your code that needs to use a packet +stream. More specifically, you will give your code a template type +argument for the type of the packet stream. In production, you will +instantiate your template with `ConcretePacketStream` as the type +argument. In tests, you will instantiate the same template with +`MockPacketStream`. For example, you may write: + +``` +template +void CreateConnection(PacketStream* stream) { ... } + +template +class PacketReader { + public: + void ReadPackets(PacketStream* stream, size_t packet_num); +}; +``` + +Then you can use `CreateConnection()` and +`PacketReader` in production code, and use +`CreateConnection()` and +`PacketReader` in tests. + +``` + MockPacketStream mock_stream; + EXPECT_CALL(mock_stream, ...)...; + .. set more expectations on mock_stream ... + PacketReader reader(&mock_stream); + ... exercise reader ... +``` + +## Mocking Free Functions ## + +It's possible to use Google Mock to mock a free function (i.e. a +C-style function or a static method). You just need to rewrite your +code to use an interface (abstract class). + +Instead of calling a free function (say, `OpenFile`) directly, +introduce an interface for it and have a concrete subclass that calls +the free function: + +``` +class FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) = 0; +}; + +class File : public FileInterface { + public: + ... + virtual bool Open(const char* path, const char* mode) { + return OpenFile(path, mode); + } +}; +``` + +Your code should talk to `FileInterface` to open a file. Now it's +easy to mock out the function. + +This may seem much hassle, but in practice you often have multiple +related functions that you can put in the same interface, so the +per-function syntactic overhead will be much lower. + +If you are concerned about the performance overhead incurred by +virtual functions, and profiling confirms your concern, you can +combine this with the recipe for [mocking non-virtual methods](#Mocking_Nonvirtual_Methods.md). + +## The Nice, the Strict, and the Naggy ## + +If a mock method has no `EXPECT_CALL` spec but is called, Google Mock +will print a warning about the "uninteresting call". The rationale is: + + * New methods may be added to an interface after a test is written. We shouldn't fail a test just because a method it doesn't know about is called. + * However, this may also mean there's a bug in the test, so Google Mock shouldn't be silent either. If the user believes these calls are harmless, he can add an `EXPECT_CALL()` to suppress the warning. + +However, sometimes you may want to suppress all "uninteresting call" +warnings, while sometimes you may want the opposite, i.e. to treat all +of them as errors. Google Mock lets you make the decision on a +per-mock-object basis. + +Suppose your test uses a mock class `MockFoo`: + +``` +TEST(...) { + MockFoo mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +If a method of `mock_foo` other than `DoThis()` is called, it will be +reported by Google Mock as a warning. However, if you rewrite your +test to use `NiceMock` instead, the warning will be gone, +resulting in a cleaner test output: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +`NiceMock` is a subclass of `MockFoo`, so it can be used +wherever `MockFoo` is accepted. + +It also works if `MockFoo`'s constructor takes some arguments, as +`NiceMock` "inherits" `MockFoo`'s constructors: + +``` +using ::testing::NiceMock; + +TEST(...) { + NiceMock mock_foo(5, "hi"); // Calls MockFoo(5, "hi"). + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... +} +``` + +The usage of `StrictMock` is similar, except that it makes all +uninteresting calls failures: + +``` +using ::testing::StrictMock; + +TEST(...) { + StrictMock mock_foo; + EXPECT_CALL(mock_foo, DoThis()); + ... code that uses mock_foo ... + + // The test will fail if a method of mock_foo other than DoThis() + // is called. +} +``` + +There are some caveats though (I don't like them just as much as the +next guy, but sadly they are side effects of C++'s limitations): + + 1. `NiceMock` and `StrictMock` only work for mock methods defined using the `MOCK_METHOD*` family of macros **directly** in the `MockFoo` class. If a mock method is defined in a **base class** of `MockFoo`, the "nice" or "strict" modifier may not affect it, depending on the compiler. In particular, nesting `NiceMock` and `StrictMock` (e.g. `NiceMock >`) is **not** supported. + 1. The constructors of the base mock (`MockFoo`) cannot have arguments passed by non-const reference, which happens to be banned by the [Google C++ style guide](http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml). + 1. During the constructor or destructor of `MockFoo`, the mock object is _not_ nice or strict. This may cause surprises if the constructor or destructor calls a mock method on `this` object. (This behavior, however, is consistent with C++'s general rule: if a constructor or destructor calls a virtual method of `this` object, that method is treated as non-virtual. In other words, to the base class's constructor or destructor, `this` object behaves like an instance of the base class, not the derived class. This rule is required for safety. Otherwise a base constructor may use members of a derived class before they are initialized, or a base destructor may use members of a derived class after they have been destroyed.) + +Finally, you should be **very cautious** about when to use naggy or strict mocks, as they tend to make tests more brittle and harder to maintain. When you refactor your code without changing its externally visible behavior, ideally you should't need to update any tests. If your code interacts with a naggy mock, however, you may start to get spammed with warnings as the result of your change. Worse, if your code interacts with a strict mock, your tests may start to fail and you'll be forced to fix them. Our general recommendation is to use nice mocks (not yet the default) most of the time, use naggy mocks (the current default) when developing or debugging tests, and use strict mocks only as the last resort. + +## Simplifying the Interface without Breaking Existing Code ## + +Sometimes a method has a long list of arguments that is mostly +uninteresting. For example, + +``` +class LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, + const struct tm* tm_time, + const char* message, size_t message_len) = 0; +}; +``` + +This method's argument list is lengthy and hard to work with (let's +say that the `message` argument is not even 0-terminated). If we mock +it as is, using the mock will be awkward. If, however, we try to +simplify this interface, we'll need to fix all clients depending on +it, which is often infeasible. + +The trick is to re-dispatch the method in the mock class: + +``` +class ScopedMockLog : public LogSink { + public: + ... + virtual void send(LogSeverity severity, const char* full_filename, + const char* base_filename, int line, const tm* tm_time, + const char* message, size_t message_len) { + // We are only interested in the log severity, full file name, and + // log message. + Log(severity, full_filename, std::string(message, message_len)); + } + + // Implements the mock method: + // + // void Log(LogSeverity severity, + // const string& file_path, + // const string& message); + MOCK_METHOD3(Log, void(LogSeverity severity, const string& file_path, + const string& message)); +}; +``` + +By defining a new mock method with a trimmed argument list, we make +the mock class much more user-friendly. + +## Alternative to Mocking Concrete Classes ## + +Often you may find yourself using classes that don't implement +interfaces. In order to test your code that uses such a class (let's +call it `Concrete`), you may be tempted to make the methods of +`Concrete` virtual and then mock it. + +Try not to do that. + +Making a non-virtual function virtual is a big decision. It creates an +extension point where subclasses can tweak your class' behavior. This +weakens your control on the class because now it's harder to maintain +the class' invariants. You should make a function virtual only when +there is a valid reason for a subclass to override it. + +Mocking concrete classes directly is problematic as it creates a tight +coupling between the class and the tests - any small change in the +class may invalidate your tests and make test maintenance a pain. + +To avoid such problems, many programmers have been practicing "coding +to interfaces": instead of talking to the `Concrete` class, your code +would define an interface and talk to it. Then you implement that +interface as an adaptor on top of `Concrete`. In tests, you can easily +mock that interface to observe how your code is doing. + +This technique incurs some overhead: + + * You pay the cost of virtual function calls (usually not a problem). + * There is more abstraction for the programmers to learn. + +However, it can also bring significant benefits in addition to better +testability: + + * `Concrete`'s API may not fit your problem domain very well, as you may not be the only client it tries to serve. By designing your own interface, you have a chance to tailor it to your need - you may add higher-level functionalities, rename stuff, etc instead of just trimming the class. This allows you to write your code (user of the interface) in a more natural way, which means it will be more readable, more maintainable, and you'll be more productive. + * If `Concrete`'s implementation ever has to change, you don't have to rewrite everywhere it is used. Instead, you can absorb the change in your implementation of the interface, and your other code and tests will be insulated from this change. + +Some people worry that if everyone is practicing this technique, they +will end up writing lots of redundant code. This concern is totally +understandable. However, there are two reasons why it may not be the +case: + + * Different projects may need to use `Concrete` in different ways, so the best interfaces for them will be different. Therefore, each of them will have its own domain-specific interface on top of `Concrete`, and they will not be the same code. + * If enough projects want to use the same interface, they can always share it, just like they have been sharing `Concrete`. You can check in the interface and the adaptor somewhere near `Concrete` (perhaps in a `contrib` sub-directory) and let many projects use it. + +You need to weigh the pros and cons carefully for your particular +problem, but I'd like to assure you that the Java community has been +practicing this for a long time and it's a proven effective technique +applicable in a wide variety of situations. :-) + +## Delegating Calls to a Fake ## + +Some times you have a non-trivial fake implementation of an +interface. For example: + +``` +class Foo { + public: + virtual ~Foo() {} + virtual char DoThis(int n) = 0; + virtual void DoThat(const char* s, int* p) = 0; +}; + +class FakeFoo : public Foo { + public: + virtual char DoThis(int n) { + return (n > 0) ? '+' : + (n < 0) ? '-' : '0'; + } + + virtual void DoThat(const char* s, int* p) { + *p = strlen(s); + } +}; +``` + +Now you want to mock this interface such that you can set expectations +on it. However, you also want to use `FakeFoo` for the default +behavior, as duplicating it in the mock object is, well, a lot of +work. + +When you define the mock class using Google Mock, you can have it +delegate its default action to a fake class you already have, using +this pattern: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + // Normal mock method definitions using Google Mock. + MOCK_METHOD1(DoThis, char(int n)); + MOCK_METHOD2(DoThat, void(const char* s, int* p)); + + // Delegates the default actions of the methods to a FakeFoo object. + // This must be called *before* the custom ON_CALL() statements. + void DelegateToFake() { + ON_CALL(*this, DoThis(_)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThis)); + ON_CALL(*this, DoThat(_, _)) + .WillByDefault(Invoke(&fake_, &FakeFoo::DoThat)); + } + private: + FakeFoo fake_; // Keeps an instance of the fake in the mock. +}; +``` + +With that, you can use `MockFoo` in your tests as usual. Just remember +that if you don't explicitly set an action in an `ON_CALL()` or +`EXPECT_CALL()`, the fake will be called upon to do it: + +``` +using ::testing::_; + +TEST(AbcTest, Xyz) { + MockFoo foo; + foo.DelegateToFake(); // Enables the fake for delegation. + + // Put your ON_CALL(foo, ...)s here, if any. + + // No action specified, meaning to use the default action. + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(foo, DoThat(_, _)); + + int n = 0; + EXPECT_EQ('+', foo.DoThis(5)); // FakeFoo::DoThis() is invoked. + foo.DoThat("Hi", &n); // FakeFoo::DoThat() is invoked. + EXPECT_EQ(2, n); +} +``` + +**Some tips:** + + * If you want, you can still override the default action by providing your own `ON_CALL()` or using `.WillOnce()` / `.WillRepeatedly()` in `EXPECT_CALL()`. + * In `DelegateToFake()`, you only need to delegate the methods whose fake implementation you intend to use. + * The general technique discussed here works for overloaded methods, but you'll need to tell the compiler which version you mean. To disambiguate a mock function (the one you specify inside the parentheses of `ON_CALL()`), see the "Selecting Between Overloaded Functions" section on this page; to disambiguate a fake function (the one you place inside `Invoke()`), use a `static_cast` to specify the function's type. For instance, if class `Foo` has methods `char DoThis(int n)` and `bool DoThis(double x) const`, and you want to invoke the latter, you need to write `Invoke(&fake_, static_cast(&FakeFoo::DoThis))` instead of `Invoke(&fake_, &FakeFoo::DoThis)` (The strange-looking thing inside the angled brackets of `static_cast` is the type of a function pointer to the second `DoThis()` method.). + * Having to mix a mock and a fake is often a sign of something gone wrong. Perhaps you haven't got used to the interaction-based way of testing yet. Or perhaps your interface is taking on too many roles and should be split up. Therefore, **don't abuse this**. We would only recommend to do it as an intermediate step when you are refactoring your code. + +Regarding the tip on mixing a mock and a fake, here's an example on +why it may be a bad sign: Suppose you have a class `System` for +low-level system operations. In particular, it does file and I/O +operations. And suppose you want to test how your code uses `System` +to do I/O, and you just want the file operations to work normally. If +you mock out the entire `System` class, you'll have to provide a fake +implementation for the file operation part, which suggests that +`System` is taking on too many roles. + +Instead, you can define a `FileOps` interface and an `IOOps` interface +and split `System`'s functionalities into the two. Then you can mock +`IOOps` without mocking `FileOps`. + +## Delegating Calls to a Real Object ## + +When using testing doubles (mocks, fakes, stubs, and etc), sometimes +their behaviors will differ from those of the real objects. This +difference could be either intentional (as in simulating an error such +that you can test the error handling code) or unintentional. If your +mocks have different behaviors than the real objects by mistake, you +could end up with code that passes the tests but fails in production. + +You can use the _delegating-to-real_ technique to ensure that your +mock has the same behavior as the real object while retaining the +ability to validate calls. This technique is very similar to the +delegating-to-fake technique, the difference being that we use a real +object instead of a fake. Here's an example: + +``` +using ::testing::_; +using ::testing::AtLeast; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MockFoo() { + // By default, all calls are delegated to the real object. + ON_CALL(*this, DoThis()) + .WillByDefault(Invoke(&real_, &Foo::DoThis)); + ON_CALL(*this, DoThat(_)) + .WillByDefault(Invoke(&real_, &Foo::DoThat)); + ... + } + MOCK_METHOD0(DoThis, ...); + MOCK_METHOD1(DoThat, ...); + ... + private: + Foo real_; +}; +... + + MockFoo mock; + + EXPECT_CALL(mock, DoThis()) + .Times(3); + EXPECT_CALL(mock, DoThat("Hi")) + .Times(AtLeast(1)); + ... use mock in test ... +``` + +With this, Google Mock will verify that your code made the right calls +(with the right arguments, in the right order, called the right number +of times, etc), and a real object will answer the calls (so the +behavior will be the same as in production). This gives you the best +of both worlds. + +## Delegating Calls to a Parent Class ## + +Ideally, you should code to interfaces, whose methods are all pure +virtual. In reality, sometimes you do need to mock a virtual method +that is not pure (i.e, it already has an implementation). For example: + +``` +class Foo { + public: + virtual ~Foo(); + + virtual void Pure(int n) = 0; + virtual int Concrete(const char* str) { ... } +}; + +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); +}; +``` + +Sometimes you may want to call `Foo::Concrete()` instead of +`MockFoo::Concrete()`. Perhaps you want to do it as part of a stub +action, or perhaps your test doesn't need to mock `Concrete()` at all +(but it would be oh-so painful to have to define a new mock class +whenever you don't need to mock one of its methods). + +The trick is to leave a back door in your mock class for accessing the +real methods in the base class: + +``` +class MockFoo : public Foo { + public: + // Mocking a pure method. + MOCK_METHOD1(Pure, void(int n)); + // Mocking a concrete method. Foo::Concrete() is shadowed. + MOCK_METHOD1(Concrete, int(const char* str)); + + // Use this to call Concrete() defined in Foo. + int FooConcrete(const char* str) { return Foo::Concrete(str); } +}; +``` + +Now, you can call `Foo::Concrete()` inside an action by: + +``` +using ::testing::_; +using ::testing::Invoke; +... + EXPECT_CALL(foo, Concrete(_)) + .WillOnce(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +or tell the mock object that you don't want to mock `Concrete()`: + +``` +using ::testing::Invoke; +... + ON_CALL(foo, Concrete(_)) + .WillByDefault(Invoke(&foo, &MockFoo::FooConcrete)); +``` + +(Why don't we just write `Invoke(&foo, &Foo::Concrete)`? If you do +that, `MockFoo::Concrete()` will be called (and cause an infinite +recursion) since `Foo::Concrete()` is virtual. That's just how C++ +works.) + +# Using Matchers # + +## Matching Argument Values Exactly ## + +You can specify exactly which arguments a mock method is expecting: + +``` +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(5)) + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", bar)); +``` + +## Using Simple Matchers ## + +You can use matchers to match arguments that have a certain property: + +``` +using ::testing::Ge; +using ::testing::NotNull; +using ::testing::Return; +... + EXPECT_CALL(foo, DoThis(Ge(5))) // The argument must be >= 5. + .WillOnce(Return('a')); + EXPECT_CALL(foo, DoThat("Hello", NotNull())); + // The second argument must not be NULL. +``` + +A frequently used matcher is `_`, which matches anything: + +``` +using ::testing::_; +using ::testing::NotNull; +... + EXPECT_CALL(foo, DoThat(_, NotNull())); +``` + +## Combining Matchers ## + +You can build complex matchers from existing ones using `AllOf()`, +`AnyOf()`, and `Not()`: + +``` +using ::testing::AllOf; +using ::testing::Gt; +using ::testing::HasSubstr; +using ::testing::Ne; +using ::testing::Not; +... + // The argument must be > 5 and != 10. + EXPECT_CALL(foo, DoThis(AllOf(Gt(5), + Ne(10)))); + + // The first argument must not contain sub-string "blah". + EXPECT_CALL(foo, DoThat(Not(HasSubstr("blah")), + NULL)); +``` + +## Casting Matchers ## + +Google Mock matchers are statically typed, meaning that the compiler +can catch your mistake if you use a matcher of the wrong type (for +example, if you use `Eq(5)` to match a `string` argument). Good for +you! + +Sometimes, however, you know what you're doing and want the compiler +to give you some slack. One example is that you have a matcher for +`long` and the argument you want to match is `int`. While the two +types aren't exactly the same, there is nothing really wrong with +using a `Matcher` to match an `int` - after all, we can first +convert the `int` argument to a `long` before giving it to the +matcher. + +To support this need, Google Mock gives you the +`SafeMatcherCast(m)` function. It casts a matcher `m` to type +`Matcher`. To ensure safety, Google Mock checks that (let `U` be the +type `m` accepts): + + 1. Type `T` can be implicitly cast to type `U`; + 1. When both `T` and `U` are built-in arithmetic types (`bool`, integers, and floating-point numbers), the conversion from `T` to `U` is not lossy (in other words, any value representable by `T` can also be represented by `U`); and + 1. When `U` is a reference, `T` must also be a reference (as the underlying matcher may be interested in the address of the `U` value). + +The code won't compile if any of these conditions isn't met. + +Here's one example: + +``` +using ::testing::SafeMatcherCast; + +// A base class and a child class. +class Base { ... }; +class Derived : public Base { ... }; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(DoThis, void(Derived* derived)); +}; +... + + MockFoo foo; + // m is a Matcher we got from somewhere. + EXPECT_CALL(foo, DoThis(SafeMatcherCast(m))); +``` + +If you find `SafeMatcherCast(m)` too limiting, you can use a similar +function `MatcherCast(m)`. The difference is that `MatcherCast` works +as long as you can `static_cast` type `T` to type `U`. + +`MatcherCast` essentially lets you bypass C++'s type system +(`static_cast` isn't always safe as it could throw away information, +for example), so be careful not to misuse/abuse it. + +## Selecting Between Overloaded Functions ## + +If you expect an overloaded function to be called, the compiler may +need some help on which overloaded version it is. + +To disambiguate functions overloaded on the const-ness of this object, +use the `Const()` argument wrapper. + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + ... + MOCK_METHOD0(GetBar, Bar&()); + MOCK_CONST_METHOD0(GetBar, const Bar&()); +}; +... + + MockFoo foo; + Bar bar1, bar2; + EXPECT_CALL(foo, GetBar()) // The non-const GetBar(). + .WillOnce(ReturnRef(bar1)); + EXPECT_CALL(Const(foo), GetBar()) // The const GetBar(). + .WillOnce(ReturnRef(bar2)); +``` + +(`Const()` is defined by Google Mock and returns a `const` reference +to its argument.) + +To disambiguate overloaded functions with the same number of arguments +but different argument types, you may need to specify the exact type +of a matcher, either by wrapping your matcher in `Matcher()`, or +using a matcher whose type is fixed (`TypedEq`, `An()`, +etc): + +``` +using ::testing::An; +using ::testing::Lt; +using ::testing::Matcher; +using ::testing::TypedEq; + +class MockPrinter : public Printer { + public: + MOCK_METHOD1(Print, void(int n)); + MOCK_METHOD1(Print, void(char c)); +}; + +TEST(PrinterTest, Print) { + MockPrinter printer; + + EXPECT_CALL(printer, Print(An())); // void Print(int); + EXPECT_CALL(printer, Print(Matcher(Lt(5)))); // void Print(int); + EXPECT_CALL(printer, Print(TypedEq('a'))); // void Print(char); + + printer.Print(3); + printer.Print(6); + printer.Print('a'); +} +``` + +## Performing Different Actions Based on the Arguments ## + +When a mock method is called, the _last_ matching expectation that's +still active will be selected (think "newer overrides older"). So, you +can make a method do different things depending on its argument values +like this: + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Return; +... + // The default case. + EXPECT_CALL(foo, DoThis(_)) + .WillRepeatedly(Return('b')); + + // The more specific case. + EXPECT_CALL(foo, DoThis(Lt(5))) + .WillRepeatedly(Return('a')); +``` + +Now, if `foo.DoThis()` is called with a value less than 5, `'a'` will +be returned; otherwise `'b'` will be returned. + +## Matching Multiple Arguments as a Whole ## + +Sometimes it's not enough to match the arguments individually. For +example, we may want to say that the first argument must be less than +the second argument. The `With()` clause allows us to match +all arguments of a mock function as a whole. For example, + +``` +using ::testing::_; +using ::testing::Lt; +using ::testing::Ne; +... + EXPECT_CALL(foo, InRange(Ne(0), _)) + .With(Lt()); +``` + +says that the first argument of `InRange()` must not be 0, and must be +less than the second argument. + +The expression inside `With()` must be a matcher of type +`Matcher >`, where `A1`, ..., `An` are the +types of the function arguments. + +You can also write `AllArgs(m)` instead of `m` inside `.With()`. The +two forms are equivalent, but `.With(AllArgs(Lt()))` is more readable +than `.With(Lt())`. + +You can use `Args(m)` to match the `n` selected arguments +(as a tuple) against `m`. For example, + +``` +using ::testing::_; +using ::testing::AllOf; +using ::testing::Args; +using ::testing::Lt; +... + EXPECT_CALL(foo, Blah(_, _, _)) + .With(AllOf(Args<0, 1>(Lt()), Args<1, 2>(Lt()))); +``` + +says that `Blah()` will be called with arguments `x`, `y`, and `z` where +`x < y < z`. + +As a convenience and example, Google Mock provides some matchers for +2-tuples, including the `Lt()` matcher above. See the [CheatSheet](V1_7_CheatSheet.md) for +the complete list. + +Note that if you want to pass the arguments to a predicate of your own +(e.g. `.With(Args<0, 1>(Truly(&MyPredicate)))`), that predicate MUST be +written to take a `tr1::tuple` as its argument; Google Mock will pass the `n` +selected arguments as _one_ single tuple to the predicate. + +## Using Matchers as Predicates ## + +Have you noticed that a matcher is just a fancy predicate that also +knows how to describe itself? Many existing algorithms take predicates +as arguments (e.g. those defined in STL's `` header), and +it would be a shame if Google Mock matchers are not allowed to +participate. + +Luckily, you can use a matcher where a unary predicate functor is +expected by wrapping it inside the `Matches()` function. For example, + +``` +#include +#include + +std::vector v; +... +// How many elements in v are >= 10? +const int count = count_if(v.begin(), v.end(), Matches(Ge(10))); +``` + +Since you can build complex matchers from simpler ones easily using +Google Mock, this gives you a way to conveniently construct composite +predicates (doing the same using STL's `` header is just +painful). For example, here's a predicate that's satisfied by any +number that is >= 0, <= 100, and != 50: + +``` +Matches(AllOf(Ge(0), Le(100), Ne(50))) +``` + +## Using Matchers in Google Test Assertions ## + +Since matchers are basically predicates that also know how to describe +themselves, there is a way to take advantage of them in +[Google Test](http://code.google.com/p/googletest/) assertions. It's +called `ASSERT_THAT` and `EXPECT_THAT`: + +``` + ASSERT_THAT(value, matcher); // Asserts that value matches matcher. + EXPECT_THAT(value, matcher); // The non-fatal version. +``` + +For example, in a Google Test test you can write: + +``` +#include "gmock/gmock.h" + +using ::testing::AllOf; +using ::testing::Ge; +using ::testing::Le; +using ::testing::MatchesRegex; +using ::testing::StartsWith; +... + + EXPECT_THAT(Foo(), StartsWith("Hello")); + EXPECT_THAT(Bar(), MatchesRegex("Line \\d+")); + ASSERT_THAT(Baz(), AllOf(Ge(5), Le(10))); +``` + +which (as you can probably guess) executes `Foo()`, `Bar()`, and +`Baz()`, and verifies that: + + * `Foo()` returns a string that starts with `"Hello"`. + * `Bar()` returns a string that matches regular expression `"Line \\d+"`. + * `Baz()` returns a number in the range [5, 10]. + +The nice thing about these macros is that _they read like +English_. They generate informative messages too. For example, if the +first `EXPECT_THAT()` above fails, the message will be something like: + +``` +Value of: Foo() + Actual: "Hi, world!" +Expected: starts with "Hello" +``` + +**Credit:** The idea of `(ASSERT|EXPECT)_THAT` was stolen from the +[Hamcrest](http://code.google.com/p/hamcrest/) project, which adds +`assertThat()` to JUnit. + +## Using Predicates as Matchers ## + +Google Mock provides a built-in set of matchers. In case you find them +lacking, you can use an arbitray unary predicate function or functor +as a matcher - as long as the predicate accepts a value of the type +you want. You do this by wrapping the predicate inside the `Truly()` +function, for example: + +``` +using ::testing::Truly; + +int IsEven(int n) { return (n % 2) == 0 ? 1 : 0; } +... + + // Bar() must be called with an even number. + EXPECT_CALL(foo, Bar(Truly(IsEven))); +``` + +Note that the predicate function / functor doesn't have to return +`bool`. It works as long as the return value can be used as the +condition in statement `if (condition) ...`. + +## Matching Arguments that Are Not Copyable ## + +When you do an `EXPECT_CALL(mock_obj, Foo(bar))`, Google Mock saves +away a copy of `bar`. When `Foo()` is called later, Google Mock +compares the argument to `Foo()` with the saved copy of `bar`. This +way, you don't need to worry about `bar` being modified or destroyed +after the `EXPECT_CALL()` is executed. The same is true when you use +matchers like `Eq(bar)`, `Le(bar)`, and so on. + +But what if `bar` cannot be copied (i.e. has no copy constructor)? You +could define your own matcher function and use it with `Truly()`, as +the previous couple of recipes have shown. Or, you may be able to get +away from it if you can guarantee that `bar` won't be changed after +the `EXPECT_CALL()` is executed. Just tell Google Mock that it should +save a reference to `bar`, instead of a copy of it. Here's how: + +``` +using ::testing::Eq; +using ::testing::ByRef; +using ::testing::Lt; +... + // Expects that Foo()'s argument == bar. + EXPECT_CALL(mock_obj, Foo(Eq(ByRef(bar)))); + + // Expects that Foo()'s argument < bar. + EXPECT_CALL(mock_obj, Foo(Lt(ByRef(bar)))); +``` + +Remember: if you do this, don't change `bar` after the +`EXPECT_CALL()`, or the result is undefined. + +## Validating a Member of an Object ## + +Often a mock function takes a reference to object as an argument. When +matching the argument, you may not want to compare the entire object +against a fixed object, as that may be over-specification. Instead, +you may need to validate a certain member variable or the result of a +certain getter method of the object. You can do this with `Field()` +and `Property()`. More specifically, + +``` +Field(&Foo::bar, m) +``` + +is a matcher that matches a `Foo` object whose `bar` member variable +satisfies matcher `m`. + +``` +Property(&Foo::baz, m) +``` + +is a matcher that matches a `Foo` object whose `baz()` method returns +a value that satisfies matcher `m`. + +For example: + +> | `Field(&Foo::number, Ge(3))` | Matches `x` where `x.number >= 3`. | +|:-----------------------------|:-----------------------------------| +> | `Property(&Foo::name, StartsWith("John "))` | Matches `x` where `x.name()` starts with `"John "`. | + +Note that in `Property(&Foo::baz, ...)`, method `baz()` must take no +argument and be declared as `const`. + +BTW, `Field()` and `Property()` can also match plain pointers to +objects. For instance, + +``` +Field(&Foo::number, Ge(3)) +``` + +matches a plain pointer `p` where `p->number >= 3`. If `p` is `NULL`, +the match will always fail regardless of the inner matcher. + +What if you want to validate more than one members at the same time? +Remember that there is `AllOf()`. + +## Validating the Value Pointed to by a Pointer Argument ## + +C++ functions often take pointers as arguments. You can use matchers +like `IsNull()`, `NotNull()`, and other comparison matchers to match a +pointer, but what if you want to make sure the value _pointed to_ by +the pointer, instead of the pointer itself, has a certain property? +Well, you can use the `Pointee(m)` matcher. + +`Pointee(m)` matches a pointer iff `m` matches the value the pointer +points to. For example: + +``` +using ::testing::Ge; +using ::testing::Pointee; +... + EXPECT_CALL(foo, Bar(Pointee(Ge(3)))); +``` + +expects `foo.Bar()` to be called with a pointer that points to a value +greater than or equal to 3. + +One nice thing about `Pointee()` is that it treats a `NULL` pointer as +a match failure, so you can write `Pointee(m)` instead of + +``` + AllOf(NotNull(), Pointee(m)) +``` + +without worrying that a `NULL` pointer will crash your test. + +Also, did we tell you that `Pointee()` works with both raw pointers +**and** smart pointers (`linked_ptr`, `shared_ptr`, `scoped_ptr`, and +etc)? + +What if you have a pointer to pointer? You guessed it - you can use +nested `Pointee()` to probe deeper inside the value. For example, +`Pointee(Pointee(Lt(3)))` matches a pointer that points to a pointer +that points to a number less than 3 (what a mouthful...). + +## Testing a Certain Property of an Object ## + +Sometimes you want to specify that an object argument has a certain +property, but there is no existing matcher that does this. If you want +good error messages, you should define a matcher. If you want to do it +quick and dirty, you could get away with writing an ordinary function. + +Let's say you have a mock function that takes an object of type `Foo`, +which has an `int bar()` method and an `int baz()` method, and you +want to constrain that the argument's `bar()` value plus its `baz()` +value is a given number. Here's how you can define a matcher to do it: + +``` +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class BarPlusBazEqMatcher : public MatcherInterface { + public: + explicit BarPlusBazEqMatcher(int expected_sum) + : expected_sum_(expected_sum) {} + + virtual bool MatchAndExplain(const Foo& foo, + MatchResultListener* listener) const { + return (foo.bar() + foo.baz()) == expected_sum_; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "bar() + baz() equals " << expected_sum_; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "bar() + baz() does not equal " << expected_sum_; + } + private: + const int expected_sum_; +}; + +inline Matcher BarPlusBazEq(int expected_sum) { + return MakeMatcher(new BarPlusBazEqMatcher(expected_sum)); +} + +... + + EXPECT_CALL(..., DoThis(BarPlusBazEq(5)))...; +``` + +## Matching Containers ## + +Sometimes an STL container (e.g. list, vector, map, ...) is passed to +a mock function and you may want to validate it. Since most STL +containers support the `==` operator, you can write +`Eq(expected_container)` or simply `expected_container` to match a +container exactly. + +Sometimes, though, you may want to be more flexible (for example, the +first element must be an exact match, but the second element can be +any positive number, and so on). Also, containers used in tests often +have a small number of elements, and having to define the expected +container out-of-line is a bit of a hassle. + +You can use the `ElementsAre()` or `UnorderedElementsAre()` matcher in +such cases: + +``` +using ::testing::_; +using ::testing::ElementsAre; +using ::testing::Gt; +... + + MOCK_METHOD1(Foo, void(const vector& numbers)); +... + + EXPECT_CALL(mock, Foo(ElementsAre(1, Gt(0), _, 5))); +``` + +The above matcher says that the container must have 4 elements, which +must be 1, greater than 0, anything, and 5 respectively. + +If you instead write: + +``` +using ::testing::_; +using ::testing::Gt; +using ::testing::UnorderedElementsAre; +... + + MOCK_METHOD1(Foo, void(const vector& numbers)); +... + + EXPECT_CALL(mock, Foo(UnorderedElementsAre(1, Gt(0), _, 5))); +``` + +It means that the container must have 4 elements, which under some +permutation must be 1, greater than 0, anything, and 5 respectively. + +`ElementsAre()` and `UnorderedElementsAre()` are overloaded to take 0 +to 10 arguments. If more are needed, you can place them in a C-style +array and use `ElementsAreArray()` or `UnorderedElementsAreArray()` +instead: + +``` +using ::testing::ElementsAreArray; +... + + // ElementsAreArray accepts an array of element values. + const int expected_vector1[] = { 1, 5, 2, 4, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector1))); + + // Or, an array of element matchers. + Matcher expected_vector2 = { 1, Gt(2), _, 3, ... }; + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector2))); +``` + +In case the array needs to be dynamically created (and therefore the +array size cannot be inferred by the compiler), you can give +`ElementsAreArray()` an additional argument to specify the array size: + +``` +using ::testing::ElementsAreArray; +... + int* const expected_vector3 = new int[count]; + ... fill expected_vector3 with values ... + EXPECT_CALL(mock, Foo(ElementsAreArray(expected_vector3, count))); +``` + +**Tips:** + + * `ElementsAre*()` can be used to match _any_ container that implements the STL iterator pattern (i.e. it has a `const_iterator` type and supports `begin()/end()`), not just the ones defined in STL. It will even work with container types yet to be written - as long as they follows the above pattern. + * You can use nested `ElementsAre*()` to match nested (multi-dimensional) containers. + * If the container is passed by pointer instead of by reference, just write `Pointee(ElementsAre*(...))`. + * The order of elements _matters_ for `ElementsAre*()`. Therefore don't use it with containers whose element order is undefined (e.g. `hash_map`). + +## Sharing Matchers ## + +Under the hood, a Google Mock matcher object consists of a pointer to +a ref-counted implementation object. Copying matchers is allowed and +very efficient, as only the pointer is copied. When the last matcher +that references the implementation object dies, the implementation +object will be deleted. + +Therefore, if you have some complex matcher that you want to use again +and again, there is no need to build it everytime. Just assign it to a +matcher variable and use that variable repeatedly! For example, + +``` + Matcher in_range = AllOf(Gt(5), Le(10)); + ... use in_range as a matcher in multiple EXPECT_CALLs ... +``` + +# Setting Expectations # + +## Knowing When to Expect ## + +`ON_CALL` is likely the single most under-utilized construct in Google Mock. + +There are basically two constructs for defining the behavior of a mock object: `ON_CALL` and `EXPECT_CALL`. The difference? `ON_CALL` defines what happens when a mock method is called, but _doesn't imply any expectation on the method being called._ `EXPECT_CALL` not only defines the behavior, but also sets an expectation that _the method will be called with the given arguments, for the given number of times_ (and _in the given order_ when you specify the order too). + +Since `EXPECT_CALL` does more, isn't it better than `ON_CALL`? Not really. Every `EXPECT_CALL` adds a constraint on the behavior of the code under test. Having more constraints than necessary is _baaad_ - even worse than not having enough constraints. + +This may be counter-intuitive. How could tests that verify more be worse than tests that verify less? Isn't verification the whole point of tests? + +The answer, lies in _what_ a test should verify. **A good test verifies the contract of the code.** If a test over-specifies, it doesn't leave enough freedom to the implementation. As a result, changing the implementation without breaking the contract (e.g. refactoring and optimization), which should be perfectly fine to do, can break such tests. Then you have to spend time fixing them, only to see them broken again the next time the implementation is changed. + +Keep in mind that one doesn't have to verify more than one property in one test. In fact, **it's a good style to verify only one thing in one test.** If you do that, a bug will likely break only one or two tests instead of dozens (which case would you rather debug?). If you are also in the habit of giving tests descriptive names that tell what they verify, you can often easily guess what's wrong just from the test log itself. + +So use `ON_CALL` by default, and only use `EXPECT_CALL` when you actually intend to verify that the call is made. For example, you may have a bunch of `ON_CALL`s in your test fixture to set the common mock behavior shared by all tests in the same group, and write (scarcely) different `EXPECT_CALL`s in different `TEST_F`s to verify different aspects of the code's behavior. Compared with the style where each `TEST` has many `EXPECT_CALL`s, this leads to tests that are more resilient to implementational changes (and thus less likely to require maintenance) and makes the intent of the tests more obvious (so they are easier to maintain when you do need to maintain them). + +## Ignoring Uninteresting Calls ## + +If you are not interested in how a mock method is called, just don't +say anything about it. In this case, if the method is ever called, +Google Mock will perform its default action to allow the test program +to continue. If you are not happy with the default action taken by +Google Mock, you can override it using `DefaultValue::Set()` +(described later in this document) or `ON_CALL()`. + +Please note that once you expressed interest in a particular mock +method (via `EXPECT_CALL()`), all invocations to it must match some +expectation. If this function is called but the arguments don't match +any `EXPECT_CALL()` statement, it will be an error. + +## Disallowing Unexpected Calls ## + +If a mock method shouldn't be called at all, explicitly say so: + +``` +using ::testing::_; +... + EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +If some calls to the method are allowed, but the rest are not, just +list all the expected calls: + +``` +using ::testing::AnyNumber; +using ::testing::Gt; +... + EXPECT_CALL(foo, Bar(5)); + EXPECT_CALL(foo, Bar(Gt(10))) + .Times(AnyNumber()); +``` + +A call to `foo.Bar()` that doesn't match any of the `EXPECT_CALL()` +statements will be an error. + +## Expecting Ordered Calls ## + +Although an `EXPECT_CALL()` statement defined earlier takes precedence +when Google Mock tries to match a function call with an expectation, +by default calls don't have to happen in the order `EXPECT_CALL()` +statements are written. For example, if the arguments match the +matchers in the third `EXPECT_CALL()`, but not those in the first two, +then the third expectation will be used. + +If you would rather have all calls occur in the order of the +expectations, put the `EXPECT_CALL()` statements in a block where you +define a variable of type `InSequence`: + +``` + using ::testing::_; + using ::testing::InSequence; + + { + InSequence s; + + EXPECT_CALL(foo, DoThis(5)); + EXPECT_CALL(bar, DoThat(_)) + .Times(2); + EXPECT_CALL(foo, DoThis(6)); + } +``` + +In this example, we expect a call to `foo.DoThis(5)`, followed by two +calls to `bar.DoThat()` where the argument can be anything, which are +in turn followed by a call to `foo.DoThis(6)`. If a call occurred +out-of-order, Google Mock will report an error. + +## Expecting Partially Ordered Calls ## + +Sometimes requiring everything to occur in a predetermined order can +lead to brittle tests. For example, we may care about `A` occurring +before both `B` and `C`, but aren't interested in the relative order +of `B` and `C`. In this case, the test should reflect our real intent, +instead of being overly constraining. + +Google Mock allows you to impose an arbitrary DAG (directed acyclic +graph) on the calls. One way to express the DAG is to use the +[After](http://code.google.com/p/googlemock/wiki/V1_7_CheatSheet#The_After_Clause) clause of `EXPECT_CALL`. + +Another way is via the `InSequence()` clause (not the same as the +`InSequence` class), which we borrowed from jMock 2. It's less +flexible than `After()`, but more convenient when you have long chains +of sequential calls, as it doesn't require you to come up with +different names for the expectations in the chains. Here's how it +works: + +If we view `EXPECT_CALL()` statements as nodes in a graph, and add an +edge from node A to node B wherever A must occur before B, we can get +a DAG. We use the term "sequence" to mean a directed path in this +DAG. Now, if we decompose the DAG into sequences, we just need to know +which sequences each `EXPECT_CALL()` belongs to in order to be able to +reconstruct the orginal DAG. + +So, to specify the partial order on the expectations we need to do two +things: first to define some `Sequence` objects, and then for each +`EXPECT_CALL()` say which `Sequence` objects it is part +of. Expectations in the same sequence must occur in the order they are +written. For example, + +``` + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(foo, A()) + .InSequence(s1, s2); + EXPECT_CALL(bar, B()) + .InSequence(s1); + EXPECT_CALL(bar, C()) + .InSequence(s2); + EXPECT_CALL(foo, D()) + .InSequence(s2); +``` + +specifies the following DAG (where `s1` is `A -> B`, and `s2` is `A -> +C -> D`): + +``` + +---> B + | + A ---| + | + +---> C ---> D +``` + +This means that A must occur before B and C, and C must occur before +D. There's no restriction about the order other than these. + +## Controlling When an Expectation Retires ## + +When a mock method is called, Google Mock only consider expectations +that are still active. An expectation is active when created, and +becomes inactive (aka _retires_) when a call that has to occur later +has occurred. For example, in + +``` + using ::testing::_; + using ::testing::Sequence; + + Sequence s1, s2; + + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #1 + .Times(AnyNumber()) + .InSequence(s1, s2); + EXPECT_CALL(log, Log(WARNING, _, "Data set is empty.")) // #2 + .InSequence(s1); + EXPECT_CALL(log, Log(WARNING, _, "User not found.")) // #3 + .InSequence(s2); +``` + +as soon as either #2 or #3 is matched, #1 will retire. If a warning +`"File too large."` is logged after this, it will be an error. + +Note that an expectation doesn't retire automatically when it's +saturated. For example, + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")); // #2 +``` + +says that there will be exactly one warning with the message `"File +too large."`. If the second warning contains this message too, #2 will +match again and result in an upper-bound-violated error. + +If this is not what you want, you can ask an expectation to retire as +soon as it becomes saturated: + +``` +using ::testing::_; +... + EXPECT_CALL(log, Log(WARNING, _, _)); // #1 + EXPECT_CALL(log, Log(WARNING, _, "File too large.")) // #2 + .RetiresOnSaturation(); +``` + +Here #2 can be used only once, so if you have two warnings with the +message `"File too large."`, the first will match #2 and the second +will match #1 - there will be no error. + +# Using Actions # + +## Returning References from Mock Methods ## + +If a mock function's return type is a reference, you need to use +`ReturnRef()` instead of `Return()` to return a result: + +``` +using ::testing::ReturnRef; + +class MockFoo : public Foo { + public: + MOCK_METHOD0(GetBar, Bar&()); +}; +... + + MockFoo foo; + Bar bar; + EXPECT_CALL(foo, GetBar()) + .WillOnce(ReturnRef(bar)); +``` + +## Returning Live Values from Mock Methods ## + +The `Return(x)` action saves a copy of `x` when the action is +_created_, and always returns the same value whenever it's +executed. Sometimes you may want to instead return the _live_ value of +`x` (i.e. its value at the time when the action is _executed_.). + +If the mock function's return type is a reference, you can do it using +`ReturnRef(x)`, as shown in the previous recipe ("Returning References +from Mock Methods"). However, Google Mock doesn't let you use +`ReturnRef()` in a mock function whose return type is not a reference, +as doing that usually indicates a user error. So, what shall you do? + +You may be tempted to try `ByRef()`: + +``` +using testing::ByRef; +using testing::Return; + +class MockFoo : public Foo { + public: + MOCK_METHOD0(GetValue, int()); +}; +... + int x = 0; + MockFoo foo; + EXPECT_CALL(foo, GetValue()) + .WillRepeatedly(Return(ByRef(x))); + x = 42; + EXPECT_EQ(42, foo.GetValue()); +``` + +Unfortunately, it doesn't work here. The above code will fail with error: + +``` +Value of: foo.GetValue() + Actual: 0 +Expected: 42 +``` + +The reason is that `Return(value)` converts `value` to the actual +return type of the mock function at the time when the action is +_created_, not when it is _executed_. (This behavior was chosen for +the action to be safe when `value` is a proxy object that references +some temporary objects.) As a result, `ByRef(x)` is converted to an +`int` value (instead of a `const int&`) when the expectation is set, +and `Return(ByRef(x))` will always return 0. + +`ReturnPointee(pointer)` was provided to solve this problem +specifically. It returns the value pointed to by `pointer` at the time +the action is _executed_: + +``` +using testing::ReturnPointee; +... + int x = 0; + MockFoo foo; + EXPECT_CALL(foo, GetValue()) + .WillRepeatedly(ReturnPointee(&x)); // Note the & here. + x = 42; + EXPECT_EQ(42, foo.GetValue()); // This will succeed now. +``` + +## Combining Actions ## + +Want to do more than one thing when a function is called? That's +fine. `DoAll()` allow you to do sequence of actions every time. Only +the return value of the last action in the sequence will be used. + +``` +using ::testing::DoAll; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Bar, bool(int n)); +}; +... + + EXPECT_CALL(foo, Bar(_)) + .WillOnce(DoAll(action_1, + action_2, + ... + action_n)); +``` + +## Mocking Side Effects ## + +Sometimes a method exhibits its effect not via returning a value but +via side effects. For example, it may change some global state or +modify an output argument. To mock side effects, in general you can +define your own action by implementing `::testing::ActionInterface`. + +If all you need to do is to change an output argument, the built-in +`SetArgPointee()` action is convenient: + +``` +using ::testing::SetArgPointee; + +class MockMutator : public Mutator { + public: + MOCK_METHOD2(Mutate, void(bool mutate, int* value)); + ... +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, Mutate(true, _)) + .WillOnce(SetArgPointee<1>(5)); +``` + +In this example, when `mutator.Mutate()` is called, we will assign 5 +to the `int` variable pointed to by argument #1 +(0-based). + +`SetArgPointee()` conveniently makes an internal copy of the +value you pass to it, removing the need to keep the value in scope and +alive. The implication however is that the value must have a copy +constructor and assignment operator. + +If the mock method also needs to return a value as well, you can chain +`SetArgPointee()` with `Return()` using `DoAll()`: + +``` +using ::testing::_; +using ::testing::Return; +using ::testing::SetArgPointee; + +class MockMutator : public Mutator { + public: + ... + MOCK_METHOD1(MutateInt, bool(int* value)); +}; +... + + MockMutator mutator; + EXPECT_CALL(mutator, MutateInt(_)) + .WillOnce(DoAll(SetArgPointee<0>(5), + Return(true))); +``` + +If the output argument is an array, use the +`SetArrayArgument(first, last)` action instead. It copies the +elements in source range `[first, last)` to the array pointed to by +the `N`-th (0-based) argument: + +``` +using ::testing::NotNull; +using ::testing::SetArrayArgument; + +class MockArrayMutator : public ArrayMutator { + public: + MOCK_METHOD2(Mutate, void(int* values, int num_values)); + ... +}; +... + + MockArrayMutator mutator; + int values[5] = { 1, 2, 3, 4, 5 }; + EXPECT_CALL(mutator, Mutate(NotNull(), 5)) + .WillOnce(SetArrayArgument<0>(values, values + 5)); +``` + +This also works when the argument is an output iterator: + +``` +using ::testing::_; +using ::testing::SeArrayArgument; + +class MockRolodex : public Rolodex { + public: + MOCK_METHOD1(GetNames, void(std::back_insert_iterator >)); + ... +}; +... + + MockRolodex rolodex; + vector names; + names.push_back("George"); + names.push_back("John"); + names.push_back("Thomas"); + EXPECT_CALL(rolodex, GetNames(_)) + .WillOnce(SetArrayArgument<0>(names.begin(), names.end())); +``` + +## Changing a Mock Object's Behavior Based on the State ## + +If you expect a call to change the behavior of a mock object, you can use `::testing::InSequence` to specify different behaviors before and after the call: + +``` +using ::testing::InSequence; +using ::testing::Return; + +... + { + InSequence seq; + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(true)); + EXPECT_CALL(my_mock, Flush()); + EXPECT_CALL(my_mock, IsDirty()) + .WillRepeatedly(Return(false)); + } + my_mock.FlushIfDirty(); +``` + +This makes `my_mock.IsDirty()` return `true` before `my_mock.Flush()` is called and return `false` afterwards. + +If the behavior change is more complex, you can store the effects in a variable and make a mock method get its return value from that variable: + +``` +using ::testing::_; +using ::testing::SaveArg; +using ::testing::Return; + +ACTION_P(ReturnPointee, p) { return *p; } +... + int previous_value = 0; + EXPECT_CALL(my_mock, GetPrevValue()) + .WillRepeatedly(ReturnPointee(&previous_value)); + EXPECT_CALL(my_mock, UpdateValue(_)) + .WillRepeatedly(SaveArg<0>(&previous_value)); + my_mock.DoSomethingToUpdateValue(); +``` + +Here `my_mock.GetPrevValue()` will always return the argument of the last `UpdateValue()` call. + +## Setting the Default Value for a Return Type ## + +If a mock method's return type is a built-in C++ type or pointer, by +default it will return 0 when invoked. You only need to specify an +action if this default value doesn't work for you. + +Sometimes, you may want to change this default value, or you may want +to specify a default value for types Google Mock doesn't know +about. You can do this using the `::testing::DefaultValue` class +template: + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD0(CalculateBar, Bar()); +}; +... + + Bar default_bar; + // Sets the default return value for type Bar. + DefaultValue::Set(default_bar); + + MockFoo foo; + + // We don't need to specify an action here, as the default + // return value works for us. + EXPECT_CALL(foo, CalculateBar()); + + foo.CalculateBar(); // This should return default_bar. + + // Unsets the default return value. + DefaultValue::Clear(); +``` + +Please note that changing the default value for a type can make you +tests hard to understand. We recommend you to use this feature +judiciously. For example, you may want to make sure the `Set()` and +`Clear()` calls are right next to the code that uses your mock. + +## Setting the Default Actions for a Mock Method ## + +You've learned how to change the default value of a given +type. However, this may be too coarse for your purpose: perhaps you +have two mock methods with the same return type and you want them to +have different behaviors. The `ON_CALL()` macro allows you to +customize your mock's behavior at the method level: + +``` +using ::testing::_; +using ::testing::AnyNumber; +using ::testing::Gt; +using ::testing::Return; +... + ON_CALL(foo, Sign(_)) + .WillByDefault(Return(-1)); + ON_CALL(foo, Sign(0)) + .WillByDefault(Return(0)); + ON_CALL(foo, Sign(Gt(0))) + .WillByDefault(Return(1)); + + EXPECT_CALL(foo, Sign(_)) + .Times(AnyNumber()); + + foo.Sign(5); // This should return 1. + foo.Sign(-9); // This should return -1. + foo.Sign(0); // This should return 0. +``` + +As you may have guessed, when there are more than one `ON_CALL()` +statements, the news order take precedence over the older ones. In +other words, the **last** one that matches the function arguments will +be used. This matching order allows you to set up the common behavior +in a mock object's constructor or the test fixture's set-up phase and +specialize the mock's behavior later. + +## Using Functions/Methods/Functors as Actions ## + +If the built-in actions don't suit you, you can easily use an existing +function, method, or functor as an action: + +``` +using ::testing::_; +using ::testing::Invoke; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(Sum, int(int x, int y)); + MOCK_METHOD1(ComplexJob, bool(int x)); +}; + +int CalculateSum(int x, int y) { return x + y; } + +class Helper { + public: + bool ComplexJob(int x); +}; +... + + MockFoo foo; + Helper helper; + EXPECT_CALL(foo, Sum(_, _)) + .WillOnce(Invoke(CalculateSum)); + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(Invoke(&helper, &Helper::ComplexJob)); + + foo.Sum(5, 6); // Invokes CalculateSum(5, 6). + foo.ComplexJob(10); // Invokes helper.ComplexJob(10); +``` + +The only requirement is that the type of the function, etc must be +_compatible_ with the signature of the mock function, meaning that the +latter's arguments can be implicitly converted to the corresponding +arguments of the former, and the former's return type can be +implicitly converted to that of the latter. So, you can invoke +something whose type is _not_ exactly the same as the mock function, +as long as it's safe to do so - nice, huh? + +## Invoking a Function/Method/Functor Without Arguments ## + +`Invoke()` is very useful for doing actions that are more complex. It +passes the mock function's arguments to the function or functor being +invoked such that the callee has the full context of the call to work +with. If the invoked function is not interested in some or all of the +arguments, it can simply ignore them. + +Yet, a common pattern is that a test author wants to invoke a function +without the arguments of the mock function. `Invoke()` allows her to +do that using a wrapper function that throws away the arguments before +invoking an underlining nullary function. Needless to say, this can be +tedious and obscures the intent of the test. + +`InvokeWithoutArgs()` solves this problem. It's like `Invoke()` except +that it doesn't pass the mock function's arguments to the +callee. Here's an example: + +``` +using ::testing::_; +using ::testing::InvokeWithoutArgs; + +class MockFoo : public Foo { + public: + MOCK_METHOD1(ComplexJob, bool(int n)); +}; + +bool Job1() { ... } +... + + MockFoo foo; + EXPECT_CALL(foo, ComplexJob(_)) + .WillOnce(InvokeWithoutArgs(Job1)); + + foo.ComplexJob(10); // Invokes Job1(). +``` + +## Invoking an Argument of the Mock Function ## + +Sometimes a mock function will receive a function pointer or a functor +(in other words, a "callable") as an argument, e.g. + +``` +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, bool(int n, bool (*fp)(int))); +}; +``` + +and you may want to invoke this callable argument: + +``` +using ::testing::_; +... + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(...); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +Arghh, you need to refer to a mock function argument but C++ has no +lambda (yet), so you have to define your own action. :-( Or do you +really? + +Well, Google Mock has an action to solve _exactly_ this problem: + +``` + InvokeArgument(arg_1, arg_2, ..., arg_m) +``` + +will invoke the `N`-th (0-based) argument the mock function receives, +with `arg_1`, `arg_2`, ..., and `arg_m`. No matter if the argument is +a function pointer or a functor, Google Mock handles them both. + +With that, you could write: + +``` +using ::testing::_; +using ::testing::InvokeArgument; +... + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(InvokeArgument<1>(5)); + // Will execute (*fp)(5), where fp is the + // second argument DoThis() receives. +``` + +What if the callable takes an argument by reference? No problem - just +wrap it inside `ByRef()`: + +``` +... + MOCK_METHOD1(Bar, bool(bool (*fp)(int, const Helper&))); +... +using ::testing::_; +using ::testing::ByRef; +using ::testing::InvokeArgument; +... + + MockFoo foo; + Helper helper; + ... + EXPECT_CALL(foo, Bar(_)) + .WillOnce(InvokeArgument<0>(5, ByRef(helper))); + // ByRef(helper) guarantees that a reference to helper, not a copy of it, + // will be passed to the callable. +``` + +What if the callable takes an argument by reference and we do **not** +wrap the argument in `ByRef()`? Then `InvokeArgument()` will _make a +copy_ of the argument, and pass a _reference to the copy_, instead of +a reference to the original value, to the callable. This is especially +handy when the argument is a temporary value: + +``` +... + MOCK_METHOD1(DoThat, bool(bool (*f)(const double& x, const string& s))); +... +using ::testing::_; +using ::testing::InvokeArgument; +... + + MockFoo foo; + ... + EXPECT_CALL(foo, DoThat(_)) + .WillOnce(InvokeArgument<0>(5.0, string("Hi"))); + // Will execute (*f)(5.0, string("Hi")), where f is the function pointer + // DoThat() receives. Note that the values 5.0 and string("Hi") are + // temporary and dead once the EXPECT_CALL() statement finishes. Yet + // it's fine to perform this action later, since a copy of the values + // are kept inside the InvokeArgument action. +``` + +## Ignoring an Action's Result ## + +Sometimes you have an action that returns _something_, but you need an +action that returns `void` (perhaps you want to use it in a mock +function that returns `void`, or perhaps it needs to be used in +`DoAll()` and it's not the last in the list). `IgnoreResult()` lets +you do that. For example: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Return; + +int Process(const MyData& data); +string DoSomething(); + +class MockFoo : public Foo { + public: + MOCK_METHOD1(Abc, void(const MyData& data)); + MOCK_METHOD0(Xyz, bool()); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, Abc(_)) + // .WillOnce(Invoke(Process)); + // The above line won't compile as Process() returns int but Abc() needs + // to return void. + .WillOnce(IgnoreResult(Invoke(Process))); + + EXPECT_CALL(foo, Xyz()) + .WillOnce(DoAll(IgnoreResult(Invoke(DoSomething)), + // Ignores the string DoSomething() returns. + Return(true))); +``` + +Note that you **cannot** use `IgnoreResult()` on an action that already +returns `void`. Doing so will lead to ugly compiler errors. + +## Selecting an Action's Arguments ## + +Say you have a mock function `Foo()` that takes seven arguments, and +you have a custom action that you want to invoke when `Foo()` is +called. Trouble is, the custom action only wants three arguments: + +``` +using ::testing::_; +using ::testing::Invoke; +... + MOCK_METHOD7(Foo, bool(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight)); +... + +bool IsVisibleInQuadrant1(bool visible, int x, int y) { + return visible && x >= 0 && y >= 0; +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(IsVisibleInQuadrant1)); // Uh, won't compile. :-( +``` + +To please the compiler God, you can to define an "adaptor" that has +the same signature as `Foo()` and calls the custom action with the +right arguments: + +``` +using ::testing::_; +using ::testing::Invoke; + +bool MyIsVisibleInQuadrant1(bool visible, const string& name, int x, int y, + const map, double>& weight, + double min_weight, double max_wight) { + return IsVisibleInQuadrant1(visible, x, y); +} +... + + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(Invoke(MyIsVisibleInQuadrant1)); // Now it works. +``` + +But isn't this awkward? + +Google Mock provides a generic _action adaptor_, so you can spend your +time minding more important business than writing your own +adaptors. Here's the syntax: + +``` + WithArgs(action) +``` + +creates an action that passes the arguments of the mock function at +the given indices (0-based) to the inner `action` and performs +it. Using `WithArgs`, our original example can be written as: + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::WithArgs; +... + EXPECT_CALL(mock, Foo(_, _, _, _, _, _, _)) + .WillOnce(WithArgs<0, 2, 3>(Invoke(IsVisibleInQuadrant1))); + // No need to define your own adaptor. +``` + +For better readability, Google Mock also gives you: + + * `WithoutArgs(action)` when the inner `action` takes _no_ argument, and + * `WithArg(action)` (no `s` after `Arg`) when the inner `action` takes _one_ argument. + +As you may have realized, `InvokeWithoutArgs(...)` is just syntactic +sugar for `WithoutArgs(Inovke(...))`. + +Here are more tips: + + * The inner action used in `WithArgs` and friends does not have to be `Invoke()` -- it can be anything. + * You can repeat an argument in the argument list if necessary, e.g. `WithArgs<2, 3, 3, 5>(...)`. + * You can change the order of the arguments, e.g. `WithArgs<3, 2, 1>(...)`. + * The types of the selected arguments do _not_ have to match the signature of the inner action exactly. It works as long as they can be implicitly converted to the corresponding arguments of the inner action. For example, if the 4-th argument of the mock function is an `int` and `my_action` takes a `double`, `WithArg<4>(my_action)` will work. + +## Ignoring Arguments in Action Functions ## + +The selecting-an-action's-arguments recipe showed us one way to make a +mock function and an action with incompatible argument lists fit +together. The downside is that wrapping the action in +`WithArgs<...>()` can get tedious for people writing the tests. + +If you are defining a function, method, or functor to be used with +`Invoke*()`, and you are not interested in some of its arguments, an +alternative to `WithArgs` is to declare the uninteresting arguments as +`Unused`. This makes the definition less cluttered and less fragile in +case the types of the uninteresting arguments change. It could also +increase the chance the action function can be reused. For example, +given + +``` + MOCK_METHOD3(Foo, double(const string& label, double x, double y)); + MOCK_METHOD3(Bar, double(int index, double x, double y)); +``` + +instead of + +``` +using ::testing::_; +using ::testing::Invoke; + +double DistanceToOriginWithLabel(const string& label, double x, double y) { + return sqrt(x*x + y*y); +} + +double DistanceToOriginWithIndex(int index, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOriginWithLabel)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOriginWithIndex)); +``` + +you could write + +``` +using ::testing::_; +using ::testing::Invoke; +using ::testing::Unused; + +double DistanceToOrigin(Unused, double x, double y) { + return sqrt(x*x + y*y); +} +... + + EXEPCT_CALL(mock, Foo("abc", _, _)) + .WillOnce(Invoke(DistanceToOrigin)); + EXEPCT_CALL(mock, Bar(5, _, _)) + .WillOnce(Invoke(DistanceToOrigin)); +``` + +## Sharing Actions ## + +Just like matchers, a Google Mock action object consists of a pointer +to a ref-counted implementation object. Therefore copying actions is +also allowed and very efficient. When the last action that references +the implementation object dies, the implementation object will be +deleted. + +If you have some complex action that you want to use again and again, +you may not have to build it from scratch everytime. If the action +doesn't have an internal state (i.e. if it always does the same thing +no matter how many times it has been called), you can assign it to an +action variable and use that variable repeatedly. For example: + +``` + Action set_flag = DoAll(SetArgPointee<0>(5), + Return(true)); + ... use set_flag in .WillOnce() and .WillRepeatedly() ... +``` + +However, if the action has its own state, you may be surprised if you +share the action object. Suppose you have an action factory +`IncrementCounter(init)` which creates an action that increments and +returns a counter whose initial value is `init`, using two actions +created from the same expression and using a shared action will +exihibit different behaviors. Example: + +``` + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(IncrementCounter(0)); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(IncrementCounter(0)); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 1 - Blah() uses a different + // counter than Bar()'s. +``` + +versus + +``` + Action increment = IncrementCounter(0); + + EXPECT_CALL(foo, DoThis()) + .WillRepeatedly(increment); + EXPECT_CALL(foo, DoThat()) + .WillRepeatedly(increment); + foo.DoThis(); // Returns 1. + foo.DoThis(); // Returns 2. + foo.DoThat(); // Returns 3 - the counter is shared. +``` + +# Misc Recipes on Using Google Mock # + +## Making the Compilation Faster ## + +Believe it or not, the _vast majority_ of the time spent on compiling +a mock class is in generating its constructor and destructor, as they +perform non-trivial tasks (e.g. verification of the +expectations). What's more, mock methods with different signatures +have different types and thus their constructors/destructors need to +be generated by the compiler separately. As a result, if you mock many +different types of methods, compiling your mock class can get really +slow. + +If you are experiencing slow compilation, you can move the definition +of your mock class' constructor and destructor out of the class body +and into a `.cpp` file. This way, even if you `#include` your mock +class in N files, the compiler only needs to generate its constructor +and destructor once, resulting in a much faster compilation. + +Let's illustrate the idea using an example. Here's the definition of a +mock class before applying this recipe: + +``` +// File mock_foo.h. +... +class MockFoo : public Foo { + public: + // Since we don't declare the constructor or the destructor, + // the compiler will generate them in every translation unit + // where this mock class is used. + + MOCK_METHOD0(DoThis, int()); + MOCK_METHOD1(DoThat, bool(const char* str)); + ... more mock methods ... +}; +``` + +After the change, it would look like: + +``` +// File mock_foo.h. +... +class MockFoo : public Foo { + public: + // The constructor and destructor are declared, but not defined, here. + MockFoo(); + virtual ~MockFoo(); + + MOCK_METHOD0(DoThis, int()); + MOCK_METHOD1(DoThat, bool(const char* str)); + ... more mock methods ... +}; +``` +and +``` +// File mock_foo.cpp. +#include "path/to/mock_foo.h" + +// The definitions may appear trivial, but the functions actually do a +// lot of things through the constructors/destructors of the member +// variables used to implement the mock methods. +MockFoo::MockFoo() {} +MockFoo::~MockFoo() {} +``` + +## Forcing a Verification ## + +When it's being destoyed, your friendly mock object will automatically +verify that all expectations on it have been satisfied, and will +generate [Google Test](http://code.google.com/p/googletest/) failures +if not. This is convenient as it leaves you with one less thing to +worry about. That is, unless you are not sure if your mock object will +be destoyed. + +How could it be that your mock object won't eventually be destroyed? +Well, it might be created on the heap and owned by the code you are +testing. Suppose there's a bug in that code and it doesn't delete the +mock object properly - you could end up with a passing test when +there's actually a bug. + +Using a heap checker is a good idea and can alleviate the concern, but +its implementation may not be 100% reliable. So, sometimes you do want +to _force_ Google Mock to verify a mock object before it is +(hopefully) destructed. You can do this with +`Mock::VerifyAndClearExpectations(&mock_object)`: + +``` +TEST(MyServerTest, ProcessesRequest) { + using ::testing::Mock; + + MockFoo* const foo = new MockFoo; + EXPECT_CALL(*foo, ...)...; + // ... other expectations ... + + // server now owns foo. + MyServer server(foo); + server.ProcessRequest(...); + + // In case that server's destructor will forget to delete foo, + // this will verify the expectations anyway. + Mock::VerifyAndClearExpectations(foo); +} // server is destroyed when it goes out of scope here. +``` + +**Tip:** The `Mock::VerifyAndClearExpectations()` function returns a +`bool` to indicate whether the verification was successful (`true` for +yes), so you can wrap that function call inside a `ASSERT_TRUE()` if +there is no point going further when the verification has failed. + +## Using Check Points ## + +Sometimes you may want to "reset" a mock object at various check +points in your test: at each check point, you verify that all existing +expectations on the mock object have been satisfied, and then you set +some new expectations on it as if it's newly created. This allows you +to work with a mock object in "phases" whose sizes are each +manageable. + +One such scenario is that in your test's `SetUp()` function, you may +want to put the object you are testing into a certain state, with the +help from a mock object. Once in the desired state, you want to clear +all expectations on the mock, such that in the `TEST_F` body you can +set fresh expectations on it. + +As you may have figured out, the `Mock::VerifyAndClearExpectations()` +function we saw in the previous recipe can help you here. Or, if you +are using `ON_CALL()` to set default actions on the mock object and +want to clear the default actions as well, use +`Mock::VerifyAndClear(&mock_object)` instead. This function does what +`Mock::VerifyAndClearExpectations(&mock_object)` does and returns the +same `bool`, **plus** it clears the `ON_CALL()` statements on +`mock_object` too. + +Another trick you can use to achieve the same effect is to put the +expectations in sequences and insert calls to a dummy "check-point" +function at specific places. Then you can verify that the mock +function calls do happen at the right time. For example, if you are +exercising code: + +``` +Foo(1); +Foo(2); +Foo(3); +``` + +and want to verify that `Foo(1)` and `Foo(3)` both invoke +`mock.Bar("a")`, but `Foo(2)` doesn't invoke anything. You can write: + +``` +using ::testing::MockFunction; + +TEST(FooTest, InvokesBarCorrectly) { + MyMock mock; + // Class MockFunction has exactly one mock method. It is named + // Call() and has type F. + MockFunction check; + { + InSequence s; + + EXPECT_CALL(mock, Bar("a")); + EXPECT_CALL(check, Call("1")); + EXPECT_CALL(check, Call("2")); + EXPECT_CALL(mock, Bar("a")); + } + Foo(1); + check.Call("1"); + Foo(2); + check.Call("2"); + Foo(3); +} +``` + +The expectation spec says that the first `Bar("a")` must happen before +check point "1", the second `Bar("a")` must happen after check point "2", +and nothing should happen between the two check points. The explicit +check points make it easy to tell which `Bar("a")` is called by which +call to `Foo()`. + +## Mocking Destructors ## + +Sometimes you want to make sure a mock object is destructed at the +right time, e.g. after `bar->A()` is called but before `bar->B()` is +called. We already know that you can specify constraints on the order +of mock function calls, so all we need to do is to mock the destructor +of the mock function. + +This sounds simple, except for one problem: a destructor is a special +function with special syntax and special semantics, and the +`MOCK_METHOD0` macro doesn't work for it: + +``` + MOCK_METHOD0(~MockFoo, void()); // Won't compile! +``` + +The good news is that you can use a simple pattern to achieve the same +effect. First, add a mock function `Die()` to your mock class and call +it in the destructor, like this: + +``` +class MockFoo : public Foo { + ... + // Add the following two lines to the mock class. + MOCK_METHOD0(Die, void()); + virtual ~MockFoo() { Die(); } +}; +``` + +(If the name `Die()` clashes with an existing symbol, choose another +name.) Now, we have translated the problem of testing when a `MockFoo` +object dies to testing when its `Die()` method is called: + +``` + MockFoo* foo = new MockFoo; + MockBar* bar = new MockBar; + ... + { + InSequence s; + + // Expects *foo to die after bar->A() and before bar->B(). + EXPECT_CALL(*bar, A()); + EXPECT_CALL(*foo, Die()); + EXPECT_CALL(*bar, B()); + } +``` + +And that's that. + +## Using Google Mock and Threads ## + +**IMPORTANT NOTE:** What we describe in this recipe is **ONLY** true on +platforms where Google Mock is thread-safe. Currently these are only +platforms that support the pthreads library (this includes Linux and Mac). +To make it thread-safe on other platforms we only need to implement +some synchronization operations in `"gtest/internal/gtest-port.h"`. + +In a **unit** test, it's best if you could isolate and test a piece of +code in a single-threaded context. That avoids race conditions and +dead locks, and makes debugging your test much easier. + +Yet many programs are multi-threaded, and sometimes to test something +we need to pound on it from more than one thread. Google Mock works +for this purpose too. + +Remember the steps for using a mock: + + 1. Create a mock object `foo`. + 1. Set its default actions and expectations using `ON_CALL()` and `EXPECT_CALL()`. + 1. The code under test calls methods of `foo`. + 1. Optionally, verify and reset the mock. + 1. Destroy the mock yourself, or let the code under test destroy it. The destructor will automatically verify it. + +If you follow the following simple rules, your mocks and threads can +live happily togeter: + + * Execute your _test code_ (as opposed to the code being tested) in _one_ thread. This makes your test easy to follow. + * Obviously, you can do step #1 without locking. + * When doing step #2 and #5, make sure no other thread is accessing `foo`. Obvious too, huh? + * #3 and #4 can be done either in one thread or in multiple threads - anyway you want. Google Mock takes care of the locking, so you don't have to do any - unless required by your test logic. + +If you violate the rules (for example, if you set expectations on a +mock while another thread is calling its methods), you get undefined +behavior. That's not fun, so don't do it. + +Google Mock guarantees that the action for a mock function is done in +the same thread that called the mock function. For example, in + +``` + EXPECT_CALL(mock, Foo(1)) + .WillOnce(action1); + EXPECT_CALL(mock, Foo(2)) + .WillOnce(action2); +``` + +if `Foo(1)` is called in thread 1 and `Foo(2)` is called in thread 2, +Google Mock will execute `action1` in thread 1 and `action2` in thread +2. + +Google Mock does _not_ impose a sequence on actions performed in +different threads (doing so may create deadlocks as the actions may +need to cooperate). This means that the execution of `action1` and +`action2` in the above example _may_ interleave. If this is a problem, +you should add proper synchronization logic to `action1` and `action2` +to make the test thread-safe. + + +Also, remember that `DefaultValue` is a global resource that +potentially affects _all_ living mock objects in your +program. Naturally, you won't want to mess with it from multiple +threads or when there still are mocks in action. + +## Controlling How Much Information Google Mock Prints ## + +When Google Mock sees something that has the potential of being an +error (e.g. a mock function with no expectation is called, a.k.a. an +uninteresting call, which is allowed but perhaps you forgot to +explicitly ban the call), it prints some warning messages, including +the arguments of the function and the return value. Hopefully this +will remind you to take a look and see if there is indeed a problem. + +Sometimes you are confident that your tests are correct and may not +appreciate such friendly messages. Some other times, you are debugging +your tests or learning about the behavior of the code you are testing, +and wish you could observe every mock call that happens (including +argument values and the return value). Clearly, one size doesn't fit +all. + +You can control how much Google Mock tells you using the +`--gmock_verbose=LEVEL` command-line flag, where `LEVEL` is a string +with three possible values: + + * `info`: Google Mock will print all informational messages, warnings, and errors (most verbose). At this setting, Google Mock will also log any calls to the `ON_CALL/EXPECT_CALL` macros. + * `warning`: Google Mock will print both warnings and errors (less verbose). This is the default. + * `error`: Google Mock will print errors only (least verbose). + +Alternatively, you can adjust the value of that flag from within your +tests like so: + +``` + ::testing::FLAGS_gmock_verbose = "error"; +``` + +Now, judiciously use the right flag to enable Google Mock serve you better! + +## Gaining Super Vision into Mock Calls ## + +You have a test using Google Mock. It fails: Google Mock tells you +that some expectations aren't satisfied. However, you aren't sure why: +Is there a typo somewhere in the matchers? Did you mess up the order +of the `EXPECT_CALL`s? Or is the code under test doing something +wrong? How can you find out the cause? + +Won't it be nice if you have X-ray vision and can actually see the +trace of all `EXPECT_CALL`s and mock method calls as they are made? +For each call, would you like to see its actual argument values and +which `EXPECT_CALL` Google Mock thinks it matches? + +You can unlock this power by running your test with the +`--gmock_verbose=info` flag. For example, given the test program: + +``` +using testing::_; +using testing::HasSubstr; +using testing::Return; + +class MockFoo { + public: + MOCK_METHOD2(F, void(const string& x, const string& y)); +}; + +TEST(Foo, Bar) { + MockFoo mock; + EXPECT_CALL(mock, F(_, _)).WillRepeatedly(Return()); + EXPECT_CALL(mock, F("a", "b")); + EXPECT_CALL(mock, F("c", HasSubstr("d"))); + + mock.F("a", "good"); + mock.F("a", "b"); +} +``` + +if you run it with `--gmock_verbose=info`, you will see this output: + +``` +[ RUN ] Foo.Bar + +foo_test.cc:14: EXPECT_CALL(mock, F(_, _)) invoked +foo_test.cc:15: EXPECT_CALL(mock, F("a", "b")) invoked +foo_test.cc:16: EXPECT_CALL(mock, F("c", HasSubstr("d"))) invoked +foo_test.cc:14: Mock function call matches EXPECT_CALL(mock, F(_, _))... + Function call: F(@0x7fff7c8dad40"a", @0x7fff7c8dad10"good") +foo_test.cc:15: Mock function call matches EXPECT_CALL(mock, F("a", "b"))... + Function call: F(@0x7fff7c8dada0"a", @0x7fff7c8dad70"b") +foo_test.cc:16: Failure +Actual function call count doesn't match EXPECT_CALL(mock, F("c", HasSubstr("d")))... + Expected: to be called once + Actual: never called - unsatisfied and active +[ FAILED ] Foo.Bar +``` + +Suppose the bug is that the `"c"` in the third `EXPECT_CALL` is a typo +and should actually be `"a"`. With the above message, you should see +that the actual `F("a", "good")` call is matched by the first +`EXPECT_CALL`, not the third as you thought. From that it should be +obvious that the third `EXPECT_CALL` is written wrong. Case solved. + +## Running Tests in Emacs ## + +If you build and run your tests in Emacs, the source file locations of +Google Mock and [Google Test](http://code.google.com/p/googletest/) +errors will be highlighted. Just press `` on one of them and +you'll be taken to the offending line. Or, you can just type `C-x `` +to jump to the next error. + +To make it even easier, you can add the following lines to your +`~/.emacs` file: + +``` +(global-set-key "\M-m" 'compile) ; m is for make +(global-set-key [M-down] 'next-error) +(global-set-key [M-up] '(lambda () (interactive) (next-error -1))) +``` + +Then you can type `M-m` to start a build, or `M-up`/`M-down` to move +back and forth between errors. + +## Fusing Google Mock Source Files ## + +Google Mock's implementation consists of dozens of files (excluding +its own tests). Sometimes you may want them to be packaged up in +fewer files instead, such that you can easily copy them to a new +machine and start hacking there. For this we provide an experimental +Python script `fuse_gmock_files.py` in the `scripts/` directory +(starting with release 1.2.0). Assuming you have Python 2.4 or above +installed on your machine, just go to that directory and run +``` +python fuse_gmock_files.py OUTPUT_DIR +``` + +and you should see an `OUTPUT_DIR` directory being created with files +`gtest/gtest.h`, `gmock/gmock.h`, and `gmock-gtest-all.cc` in it. +These three files contain everything you need to use Google Mock (and +Google Test). Just copy them to anywhere you want and you are ready +to write tests and use mocks. You can use the +[scrpts/test/Makefile](http://code.google.com/p/googlemock/source/browse/trunk/scripts/test/Makefile) file as an example on how to compile your tests +against them. + +# Extending Google Mock # + +## Writing New Matchers Quickly ## + +The `MATCHER*` family of macros can be used to define custom matchers +easily. The syntax: + +``` +MATCHER(name, description_string_expression) { statements; } +``` + +will define a matcher with the given name that executes the +statements, which must return a `bool` to indicate if the match +succeeds. Inside the statements, you can refer to the value being +matched by `arg`, and refer to its type by `arg_type`. + +The description string is a `string`-typed expression that documents +what the matcher does, and is used to generate the failure message +when the match fails. It can (and should) reference the special +`bool` variable `negation`, and should evaluate to the description of +the matcher when `negation` is `false`, or that of the matcher's +negation when `negation` is `true`. + +For convenience, we allow the description string to be empty (`""`), +in which case Google Mock will use the sequence of words in the +matcher name as the description. + +For example: +``` +MATCHER(IsDivisibleBy7, "") { return (arg % 7) == 0; } +``` +allows you to write +``` + // Expects mock_foo.Bar(n) to be called where n is divisible by 7. + EXPECT_CALL(mock_foo, Bar(IsDivisibleBy7())); +``` +or, +``` +using ::testing::Not; +... + EXPECT_THAT(some_expression, IsDivisibleBy7()); + EXPECT_THAT(some_other_expression, Not(IsDivisibleBy7())); +``` +If the above assertions fail, they will print something like: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 +... + Value of: some_other_expression + Expected: not (is divisible by 7) + Actual: 21 +``` +where the descriptions `"is divisible by 7"` and `"not (is divisible +by 7)"` are automatically calculated from the matcher name +`IsDivisibleBy7`. + +As you may have noticed, the auto-generated descriptions (especially +those for the negation) may not be so great. You can always override +them with a string expression of your own: +``` +MATCHER(IsDivisibleBy7, std::string(negation ? "isn't" : "is") + + " divisible by 7") { + return (arg % 7) == 0; +} +``` + +Optionally, you can stream additional information to a hidden argument +named `result_listener` to explain the match result. For example, a +better definition of `IsDivisibleBy7` is: +``` +MATCHER(IsDivisibleBy7, "") { + if ((arg % 7) == 0) + return true; + + *result_listener << "the remainder is " << (arg % 7); + return false; +} +``` + +With this definition, the above assertion will give a better message: +``` + Value of: some_expression + Expected: is divisible by 7 + Actual: 27 (the remainder is 6) +``` + +You should let `MatchAndExplain()` print _any additional information_ +that can help a user understand the match result. Note that it should +explain why the match succeeds in case of a success (unless it's +obvious) - this is useful when the matcher is used inside +`Not()`. There is no need to print the argument value itself, as +Google Mock already prints it for you. + +**Notes:** + + 1. The type of the value being matched (`arg_type`) is determined by the context in which you use the matcher and is supplied to you by the compiler, so you don't need to worry about declaring it (nor can you). This allows the matcher to be polymorphic. For example, `IsDivisibleBy7()` can be used to match any type where the value of `(arg % 7) == 0` can be implicitly converted to a `bool`. In the `Bar(IsDivisibleBy7())` example above, if method `Bar()` takes an `int`, `arg_type` will be `int`; if it takes an `unsigned long`, `arg_type` will be `unsigned long`; and so on. + 1. Google Mock doesn't guarantee when or how many times a matcher will be invoked. Therefore the matcher logic must be _purely functional_ (i.e. it cannot have any side effect, and the result must not depend on anything other than the value being matched and the matcher parameters). This requirement must be satisfied no matter how you define the matcher (e.g. using one of the methods described in the following recipes). In particular, a matcher can never call a mock function, as that will affect the state of the mock object and Google Mock. + +## Writing New Parameterized Matchers Quickly ## + +Sometimes you'll want to define a matcher that has parameters. For that you +can use the macro: +``` +MATCHER_P(name, param_name, description_string) { statements; } +``` +where the description string can be either `""` or a string expression +that references `negation` and `param_name`. + +For example: +``` +MATCHER_P(HasAbsoluteValue, value, "") { return abs(arg) == value; } +``` +will allow you to write: +``` + EXPECT_THAT(Blah("a"), HasAbsoluteValue(n)); +``` +which may lead to this message (assuming `n` is 10): +``` + Value of: Blah("a") + Expected: has absolute value 10 + Actual: -9 +``` + +Note that both the matcher description and its parameter are +printed, making the message human-friendly. + +In the matcher definition body, you can write `foo_type` to +reference the type of a parameter named `foo`. For example, in the +body of `MATCHER_P(HasAbsoluteValue, value)` above, you can write +`value_type` to refer to the type of `value`. + +Google Mock also provides `MATCHER_P2`, `MATCHER_P3`, ..., up to +`MATCHER_P10` to support multi-parameter matchers: +``` +MATCHER_Pk(name, param_1, ..., param_k, description_string) { statements; } +``` + +Please note that the custom description string is for a particular +**instance** of the matcher, where the parameters have been bound to +actual values. Therefore usually you'll want the parameter values to +be part of the description. Google Mock lets you do that by +referencing the matcher parameters in the description string +expression. + +For example, +``` + using ::testing::PrintToString; + MATCHER_P2(InClosedRange, low, hi, + std::string(negation ? "isn't" : "is") + " in range [" + + PrintToString(low) + ", " + PrintToString(hi) + "]") { + return low <= arg && arg <= hi; + } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the message: +``` + Expected: is in range [4, 6] +``` + +If you specify `""` as the description, the failure message will +contain the sequence of words in the matcher name followed by the +parameter values printed as a tuple. For example, +``` + MATCHER_P2(InClosedRange, low, hi, "") { ... } + ... + EXPECT_THAT(3, InClosedRange(4, 6)); +``` +would generate a failure that contains the text: +``` + Expected: in closed range (4, 6) +``` + +For the purpose of typing, you can view +``` +MATCHER_Pk(Foo, p1, ..., pk, description_string) { ... } +``` +as shorthand for +``` +template +FooMatcherPk +Foo(p1_type p1, ..., pk_type pk) { ... } +``` + +When you write `Foo(v1, ..., vk)`, the compiler infers the types of +the parameters `v1`, ..., and `vk` for you. If you are not happy with +the result of the type inference, you can specify the types by +explicitly instantiating the template, as in `Foo(5, false)`. +As said earlier, you don't get to (or need to) specify +`arg_type` as that's determined by the context in which the matcher +is used. + +You can assign the result of expression `Foo(p1, ..., pk)` to a +variable of type `FooMatcherPk`. This can be +useful when composing matchers. Matchers that don't have a parameter +or have only one parameter have special types: you can assign `Foo()` +to a `FooMatcher`-typed variable, and assign `Foo(p)` to a +`FooMatcherP`-typed variable. + +While you can instantiate a matcher template with reference types, +passing the parameters by pointer usually makes your code more +readable. If, however, you still want to pass a parameter by +reference, be aware that in the failure message generated by the +matcher you will see the value of the referenced object but not its +address. + +You can overload matchers with different numbers of parameters: +``` +MATCHER_P(Blah, a, description_string_1) { ... } +MATCHER_P2(Blah, a, b, description_string_2) { ... } +``` + +While it's tempting to always use the `MATCHER*` macros when defining +a new matcher, you should also consider implementing +`MatcherInterface` or using `MakePolymorphicMatcher()` instead (see +the recipes that follow), especially if you need to use the matcher a +lot. While these approaches require more work, they give you more +control on the types of the value being matched and the matcher +parameters, which in general leads to better compiler error messages +that pay off in the long run. They also allow overloading matchers +based on parameter types (as opposed to just based on the number of +parameters). + +## Writing New Monomorphic Matchers ## + +A matcher of argument type `T` implements +`::testing::MatcherInterface` and does two things: it tests whether a +value of type `T` matches the matcher, and can describe what kind of +values it matches. The latter ability is used for generating readable +error messages when expectations are violated. + +The interface looks like this: + +``` +class MatchResultListener { + public: + ... + // Streams x to the underlying ostream; does nothing if the ostream + // is NULL. + template + MatchResultListener& operator<<(const T& x); + + // Returns the underlying ostream. + ::std::ostream* stream(); +}; + +template +class MatcherInterface { + public: + virtual ~MatcherInterface(); + + // Returns true iff the matcher matches x; also explains the match + // result to 'listener'. + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const = 0; + + // Describes this matcher to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; + + // Describes the negation of this matcher to an ostream. + virtual void DescribeNegationTo(::std::ostream* os) const; +}; +``` + +If you need a custom matcher but `Truly()` is not a good option (for +example, you may not be happy with the way `Truly(predicate)` +describes itself, or you may want your matcher to be polymorphic as +`Eq(value)` is), you can define a matcher to do whatever you want in +two steps: first implement the matcher interface, and then define a +factory function to create a matcher instance. The second step is not +strictly needed but it makes the syntax of using the matcher nicer. + +For example, you can define a matcher to test whether an `int` is +divisible by 7 and then use it like this: +``` +using ::testing::MakeMatcher; +using ::testing::Matcher; +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; + +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, MatchResultListener* listener) const { + return (n % 7) == 0; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "is divisible by 7"; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "is not divisible by 7"; + } +}; + +inline Matcher DivisibleBy7() { + return MakeMatcher(new DivisibleBy7Matcher); +} +... + + EXPECT_CALL(foo, Bar(DivisibleBy7())); +``` + +You may improve the matcher message by streaming additional +information to the `listener` argument in `MatchAndExplain()`: + +``` +class DivisibleBy7Matcher : public MatcherInterface { + public: + virtual bool MatchAndExplain(int n, + MatchResultListener* listener) const { + const int remainder = n % 7; + if (remainder != 0) { + *listener << "the remainder is " << remainder; + } + return remainder == 0; + } + ... +}; +``` + +Then, `EXPECT_THAT(x, DivisibleBy7());` may general a message like this: +``` +Value of: x +Expected: is divisible by 7 + Actual: 23 (the remainder is 2) +``` + +## Writing New Polymorphic Matchers ## + +You've learned how to write your own matchers in the previous +recipe. Just one problem: a matcher created using `MakeMatcher()` only +works for one particular type of arguments. If you want a +_polymorphic_ matcher that works with arguments of several types (for +instance, `Eq(x)` can be used to match a `value` as long as `value` == +`x` compiles -- `value` and `x` don't have to share the same type), +you can learn the trick from `"gmock/gmock-matchers.h"` but it's a bit +involved. + +Fortunately, most of the time you can define a polymorphic matcher +easily with the help of `MakePolymorphicMatcher()`. Here's how you can +define `NotNull()` as an example: + +``` +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +using ::testing::NotNull; +using ::testing::PolymorphicMatcher; + +class NotNullMatcher { + public: + // To implement a polymorphic matcher, first define a COPYABLE class + // that has three members MatchAndExplain(), DescribeTo(), and + // DescribeNegationTo(), like the following. + + // In this example, we want to use NotNull() with any pointer, so + // MatchAndExplain() accepts a pointer of any type as its first argument. + // In general, you can define MatchAndExplain() as an ordinary method or + // a method template, or even overload it. + template + bool MatchAndExplain(T* p, + MatchResultListener* /* listener */) const { + return p != NULL; + } + + // Describes the property of a value matching this matcher. + void DescribeTo(::std::ostream* os) const { *os << "is not NULL"; } + + // Describes the property of a value NOT matching this matcher. + void DescribeNegationTo(::std::ostream* os) const { *os << "is NULL"; } +}; + +// To construct a polymorphic matcher, pass an instance of the class +// to MakePolymorphicMatcher(). Note the return type. +inline PolymorphicMatcher NotNull() { + return MakePolymorphicMatcher(NotNullMatcher()); +} +... + + EXPECT_CALL(foo, Bar(NotNull())); // The argument must be a non-NULL pointer. +``` + +**Note:** Your polymorphic matcher class does **not** need to inherit from +`MatcherInterface` or any other class, and its methods do **not** need +to be virtual. + +Like in a monomorphic matcher, you may explain the match result by +streaming additional information to the `listener` argument in +`MatchAndExplain()`. + +## Writing New Cardinalities ## + +A cardinality is used in `Times()` to tell Google Mock how many times +you expect a call to occur. It doesn't have to be exact. For example, +you can say `AtLeast(5)` or `Between(2, 4)`. + +If the built-in set of cardinalities doesn't suit you, you are free to +define your own by implementing the following interface (in namespace +`testing`): + +``` +class CardinalityInterface { + public: + virtual ~CardinalityInterface(); + + // Returns true iff call_count calls will satisfy this cardinality. + virtual bool IsSatisfiedByCallCount(int call_count) const = 0; + + // Returns true iff call_count calls will saturate this cardinality. + virtual bool IsSaturatedByCallCount(int call_count) const = 0; + + // Describes self to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; +}; +``` + +For example, to specify that a call must occur even number of times, +you can write + +``` +using ::testing::Cardinality; +using ::testing::CardinalityInterface; +using ::testing::MakeCardinality; + +class EvenNumberCardinality : public CardinalityInterface { + public: + virtual bool IsSatisfiedByCallCount(int call_count) const { + return (call_count % 2) == 0; + } + + virtual bool IsSaturatedByCallCount(int call_count) const { + return false; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "called even number of times"; + } +}; + +Cardinality EvenNumber() { + return MakeCardinality(new EvenNumberCardinality); +} +... + + EXPECT_CALL(foo, Bar(3)) + .Times(EvenNumber()); +``` + +## Writing New Actions Quickly ## + +If the built-in actions don't work for you, and you find it +inconvenient to use `Invoke()`, you can use a macro from the `ACTION*` +family to quickly define a new action that can be used in your code as +if it's a built-in action. + +By writing +``` +ACTION(name) { statements; } +``` +in a namespace scope (i.e. not inside a class or function), you will +define an action with the given name that executes the statements. +The value returned by `statements` will be used as the return value of +the action. Inside the statements, you can refer to the K-th +(0-based) argument of the mock function as `argK`. For example: +``` +ACTION(IncrementArg1) { return ++(*arg1); } +``` +allows you to write +``` +... WillOnce(IncrementArg1()); +``` + +Note that you don't need to specify the types of the mock function +arguments. Rest assured that your code is type-safe though: +you'll get a compiler error if `*arg1` doesn't support the `++` +operator, or if the type of `++(*arg1)` isn't compatible with the mock +function's return type. + +Another example: +``` +ACTION(Foo) { + (*arg2)(5); + Blah(); + *arg1 = 0; + return arg0; +} +``` +defines an action `Foo()` that invokes argument #2 (a function pointer) +with 5, calls function `Blah()`, sets the value pointed to by argument +#1 to 0, and returns argument #0. + +For more convenience and flexibility, you can also use the following +pre-defined symbols in the body of `ACTION`: + +| `argK_type` | The type of the K-th (0-based) argument of the mock function | +|:------------|:-------------------------------------------------------------| +| `args` | All arguments of the mock function as a tuple | +| `args_type` | The type of all arguments of the mock function as a tuple | +| `return_type` | The return type of the mock function | +| `function_type` | The type of the mock function | + +For example, when using an `ACTION` as a stub action for mock function: +``` +int DoSomething(bool flag, int* ptr); +``` +we have: +| **Pre-defined Symbol** | **Is Bound To** | +|:-----------------------|:----------------| +| `arg0` | the value of `flag` | +| `arg0_type` | the type `bool` | +| `arg1` | the value of `ptr` | +| `arg1_type` | the type `int*` | +| `args` | the tuple `(flag, ptr)` | +| `args_type` | the type `std::tr1::tuple` | +| `return_type` | the type `int` | +| `function_type` | the type `int(bool, int*)` | + +## Writing New Parameterized Actions Quickly ## + +Sometimes you'll want to parameterize an action you define. For that +we have another macro +``` +ACTION_P(name, param) { statements; } +``` + +For example, +``` +ACTION_P(Add, n) { return arg0 + n; } +``` +will allow you to write +``` +// Returns argument #0 + 5. +... WillOnce(Add(5)); +``` + +For convenience, we use the term _arguments_ for the values used to +invoke the mock function, and the term _parameters_ for the values +used to instantiate an action. + +Note that you don't need to provide the type of the parameter either. +Suppose the parameter is named `param`, you can also use the +Google-Mock-defined symbol `param_type` to refer to the type of the +parameter as inferred by the compiler. For example, in the body of +`ACTION_P(Add, n)` above, you can write `n_type` for the type of `n`. + +Google Mock also provides `ACTION_P2`, `ACTION_P3`, and etc to support +multi-parameter actions. For example, +``` +ACTION_P2(ReturnDistanceTo, x, y) { + double dx = arg0 - x; + double dy = arg1 - y; + return sqrt(dx*dx + dy*dy); +} +``` +lets you write +``` +... WillOnce(ReturnDistanceTo(5.0, 26.5)); +``` + +You can view `ACTION` as a degenerated parameterized action where the +number of parameters is 0. + +You can also easily define actions overloaded on the number of parameters: +``` +ACTION_P(Plus, a) { ... } +ACTION_P2(Plus, a, b) { ... } +``` + +## Restricting the Type of an Argument or Parameter in an ACTION ## + +For maximum brevity and reusability, the `ACTION*` macros don't ask +you to provide the types of the mock function arguments and the action +parameters. Instead, we let the compiler infer the types for us. + +Sometimes, however, we may want to be more explicit about the types. +There are several tricks to do that. For example: +``` +ACTION(Foo) { + // Makes sure arg0 can be converted to int. + int n = arg0; + ... use n instead of arg0 here ... +} + +ACTION_P(Bar, param) { + // Makes sure the type of arg1 is const char*. + ::testing::StaticAssertTypeEq(); + + // Makes sure param can be converted to bool. + bool flag = param; +} +``` +where `StaticAssertTypeEq` is a compile-time assertion in Google Test +that verifies two types are the same. + +## Writing New Action Templates Quickly ## + +Sometimes you want to give an action explicit template parameters that +cannot be inferred from its value parameters. `ACTION_TEMPLATE()` +supports that and can be viewed as an extension to `ACTION()` and +`ACTION_P*()`. + +The syntax: +``` +ACTION_TEMPLATE(ActionName, + HAS_m_TEMPLATE_PARAMS(kind1, name1, ..., kind_m, name_m), + AND_n_VALUE_PARAMS(p1, ..., p_n)) { statements; } +``` + +defines an action template that takes _m_ explicit template parameters +and _n_ value parameters, where _m_ is between 1 and 10, and _n_ is +between 0 and 10. `name_i` is the name of the i-th template +parameter, and `kind_i` specifies whether it's a `typename`, an +integral constant, or a template. `p_i` is the name of the i-th value +parameter. + +Example: +``` +// DuplicateArg(output) converts the k-th argument of the mock +// function to type T and copies it to *output. +ACTION_TEMPLATE(DuplicateArg, + // Note the comma between int and k: + HAS_2_TEMPLATE_PARAMS(int, k, typename, T), + AND_1_VALUE_PARAMS(output)) { + *output = T(std::tr1::get(args)); +} +``` + +To create an instance of an action template, write: +``` + ActionName(v1, ..., v_n) +``` +where the `t`s are the template arguments and the +`v`s are the value arguments. The value argument +types are inferred by the compiler. For example: +``` +using ::testing::_; +... + int n; + EXPECT_CALL(mock, Foo(_, _)) + .WillOnce(DuplicateArg<1, unsigned char>(&n)); +``` + +If you want to explicitly specify the value argument types, you can +provide additional template arguments: +``` + ActionName(v1, ..., v_n) +``` +where `u_i` is the desired type of `v_i`. + +`ACTION_TEMPLATE` and `ACTION`/`ACTION_P*` can be overloaded on the +number of value parameters, but not on the number of template +parameters. Without the restriction, the meaning of the following is +unclear: + +``` + OverloadedAction(x); +``` + +Are we using a single-template-parameter action where `bool` refers to +the type of `x`, or a two-template-parameter action where the compiler +is asked to infer the type of `x`? + +## Using the ACTION Object's Type ## + +If you are writing a function that returns an `ACTION` object, you'll +need to know its type. The type depends on the macro used to define +the action and the parameter types. The rule is relatively simple: +| **Given Definition** | **Expression** | **Has Type** | +|:---------------------|:---------------|:-------------| +| `ACTION(Foo)` | `Foo()` | `FooAction` | +| `ACTION_TEMPLATE(Foo, HAS_m_TEMPLATE_PARAMS(...), AND_0_VALUE_PARAMS())` | `Foo()` | `FooAction` | +| `ACTION_P(Bar, param)` | `Bar(int_value)` | `BarActionP` | +| `ACTION_TEMPLATE(Bar, HAS_m_TEMPLATE_PARAMS(...), AND_1_VALUE_PARAMS(p1))` | `Bar(int_value)` | `FooActionP` | +| `ACTION_P2(Baz, p1, p2)` | `Baz(bool_value, int_value)` | `BazActionP2` | +| `ACTION_TEMPLATE(Baz, HAS_m_TEMPLATE_PARAMS(...), AND_2_VALUE_PARAMS(p1, p2))` | `Baz(bool_value, int_value)` | `FooActionP2` | +| ... | ... | ... | + +Note that we have to pick different suffixes (`Action`, `ActionP`, +`ActionP2`, and etc) for actions with different numbers of value +parameters, or the action definitions cannot be overloaded on the +number of them. + +## Writing New Monomorphic Actions ## + +While the `ACTION*` macros are very convenient, sometimes they are +inappropriate. For example, despite the tricks shown in the previous +recipes, they don't let you directly specify the types of the mock +function arguments and the action parameters, which in general leads +to unoptimized compiler error messages that can baffle unfamiliar +users. They also don't allow overloading actions based on parameter +types without jumping through some hoops. + +An alternative to the `ACTION*` macros is to implement +`::testing::ActionInterface`, where `F` is the type of the mock +function in which the action will be used. For example: + +``` +template class ActionInterface { + public: + virtual ~ActionInterface(); + + // Performs the action. Result is the return type of function type + // F, and ArgumentTuple is the tuple of arguments of F. + // + // For example, if F is int(bool, const string&), then Result would + // be int, and ArgumentTuple would be tr1::tuple. + virtual Result Perform(const ArgumentTuple& args) = 0; +}; + +using ::testing::_; +using ::testing::Action; +using ::testing::ActionInterface; +using ::testing::MakeAction; + +typedef int IncrementMethod(int*); + +class IncrementArgumentAction : public ActionInterface { + public: + virtual int Perform(const tr1::tuple& args) { + int* p = tr1::get<0>(args); // Grabs the first argument. + return *p++; + } +}; + +Action IncrementArgument() { + return MakeAction(new IncrementArgumentAction); +} +... + + EXPECT_CALL(foo, Baz(_)) + .WillOnce(IncrementArgument()); + + int n = 5; + foo.Baz(&n); // Should return 5 and change n to 6. +``` + +## Writing New Polymorphic Actions ## + +The previous recipe showed you how to define your own action. This is +all good, except that you need to know the type of the function in +which the action will be used. Sometimes that can be a problem. For +example, if you want to use the action in functions with _different_ +types (e.g. like `Return()` and `SetArgPointee()`). + +If an action can be used in several types of mock functions, we say +it's _polymorphic_. The `MakePolymorphicAction()` function template +makes it easy to define such an action: + +``` +namespace testing { + +template +PolymorphicAction MakePolymorphicAction(const Impl& impl); + +} // namespace testing +``` + +As an example, let's define an action that returns the second argument +in the mock function's argument list. The first step is to define an +implementation class: + +``` +class ReturnSecondArgumentAction { + public: + template + Result Perform(const ArgumentTuple& args) const { + // To get the i-th (0-based) argument, use tr1::get(args). + return tr1::get<1>(args); + } +}; +``` + +This implementation class does _not_ need to inherit from any +particular class. What matters is that it must have a `Perform()` +method template. This method template takes the mock function's +arguments as a tuple in a **single** argument, and returns the result of +the action. It can be either `const` or not, but must be invokable +with exactly one template argument, which is the result type. In other +words, you must be able to call `Perform(args)` where `R` is the +mock function's return type and `args` is its arguments in a tuple. + +Next, we use `MakePolymorphicAction()` to turn an instance of the +implementation class into the polymorphic action we need. It will be +convenient to have a wrapper for this: + +``` +using ::testing::MakePolymorphicAction; +using ::testing::PolymorphicAction; + +PolymorphicAction ReturnSecondArgument() { + return MakePolymorphicAction(ReturnSecondArgumentAction()); +} +``` + +Now, you can use this polymorphic action the same way you use the +built-in ones: + +``` +using ::testing::_; + +class MockFoo : public Foo { + public: + MOCK_METHOD2(DoThis, int(bool flag, int n)); + MOCK_METHOD3(DoThat, string(int x, const char* str1, const char* str2)); +}; +... + + MockFoo foo; + EXPECT_CALL(foo, DoThis(_, _)) + .WillOnce(ReturnSecondArgument()); + EXPECT_CALL(foo, DoThat(_, _, _)) + .WillOnce(ReturnSecondArgument()); + ... + foo.DoThis(true, 5); // Will return 5. + foo.DoThat(1, "Hi", "Bye"); // Will return "Hi". +``` + +## Teaching Google Mock How to Print Your Values ## + +When an uninteresting or unexpected call occurs, Google Mock prints the +argument values and the stack trace to help you debug. Assertion +macros like `EXPECT_THAT` and `EXPECT_EQ` also print the values in +question when the assertion fails. Google Mock and Google Test do this using +Google Test's user-extensible value printer. + +This printer knows how to print built-in C++ types, native arrays, STL +containers, and any type that supports the `<<` operator. For other +types, it prints the raw bytes in the value and hopes that you the +user can figure it out. +[Google Test's advanced guide](http://code.google.com/p/googletest/wiki/AdvancedGuide#Teaching_Google_Test_How_to_Print_Your_Values) +explains how to extend the printer to do a better job at +printing your particular type than to dump the bytes. \ No newline at end of file diff --git a/googlemock/docs/v1_7/Documentation.md b/googlemock/docs/v1_7/Documentation.md new file mode 100644 index 0000000..d9181f2 --- /dev/null +++ b/googlemock/docs/v1_7/Documentation.md @@ -0,0 +1,12 @@ +This page lists all documentation wiki pages for Google Mock **(the SVN trunk version)** +- **if you use a released version of Google Mock, please read the documentation for that specific version instead.** + + * [ForDummies](V1_7_ForDummies.md) -- start here if you are new to Google Mock. + * [CheatSheet](V1_7_CheatSheet.md) -- a quick reference. + * [CookBook](V1_7_CookBook.md) -- recipes for doing various tasks using Google Mock. + * [FrequentlyAskedQuestions](V1_7_FrequentlyAskedQuestions.md) -- check here before asking a question on the mailing list. + +To contribute code to Google Mock, read: + + * [DevGuide](DevGuide.md) -- read this _before_ writing your first patch. + * [Pump Manual](http://code.google.com/p/googletest/wiki/PumpManual) -- how we generate some of Google Mock's source files. \ No newline at end of file diff --git a/googlemock/docs/v1_7/ForDummies.md b/googlemock/docs/v1_7/ForDummies.md new file mode 100644 index 0000000..ee03c5b --- /dev/null +++ b/googlemock/docs/v1_7/ForDummies.md @@ -0,0 +1,439 @@ + + +(**Note:** If you get compiler errors that you don't understand, be sure to consult [Google Mock Doctor](http://code.google.com/p/googlemock/wiki/V1_7_FrequentlyAskedQuestions#How_am_I_supposed_to_make_sense_of_these_horrible_template_error).) + +# What Is Google C++ Mocking Framework? # +When you write a prototype or test, often it's not feasible or wise to rely on real objects entirely. A **mock object** implements the same interface as a real object (so it can be used as one), but lets you specify at run time how it will be used and what it should do (which methods will be called? in which order? how many times? with what arguments? what will they return? etc). + +**Note:** It is easy to confuse the term _fake objects_ with mock objects. Fakes and mocks actually mean very different things in the Test-Driven Development (TDD) community: + + * **Fake** objects have working implementations, but usually take some shortcut (perhaps to make the operations less expensive), which makes them not suitable for production. An in-memory file system would be an example of a fake. + * **Mocks** are objects pre-programmed with _expectations_, which form a specification of the calls they are expected to receive. + +If all this seems too abstract for you, don't worry - the most important thing to remember is that a mock allows you to check the _interaction_ between itself and code that uses it. The difference between fakes and mocks will become much clearer once you start to use mocks. + +**Google C++ Mocking Framework** (or **Google Mock** for short) is a library (sometimes we also call it a "framework" to make it sound cool) for creating mock classes and using them. It does to C++ what [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/) do to Java. + +Using Google Mock involves three basic steps: + + 1. Use some simple macros to describe the interface you want to mock, and they will expand to the implementation of your mock class; + 1. Create some mock objects and specify its expectations and behavior using an intuitive syntax; + 1. Exercise code that uses the mock objects. Google Mock will catch any violation of the expectations as soon as it arises. + +# Why Google Mock? # +While mock objects help you remove unnecessary dependencies in tests and make them fast and reliable, using mocks manually in C++ is _hard_: + + * Someone has to implement the mocks. The job is usually tedious and error-prone. No wonder people go great distance to avoid it. + * The quality of those manually written mocks is a bit, uh, unpredictable. You may see some really polished ones, but you may also see some that were hacked up in a hurry and have all sorts of ad hoc restrictions. + * The knowledge you gained from using one mock doesn't transfer to the next. + +In contrast, Java and Python programmers have some fine mock frameworks, which automate the creation of mocks. As a result, mocking is a proven effective technique and widely adopted practice in those communities. Having the right tool absolutely makes the difference. + +Google Mock was built to help C++ programmers. It was inspired by [jMock](http://www.jmock.org/) and [EasyMock](http://www.easymock.org/), but designed with C++'s specifics in mind. It is your friend if any of the following problems is bothering you: + + * You are stuck with a sub-optimal design and wish you had done more prototyping before it was too late, but prototyping in C++ is by no means "rapid". + * Your tests are slow as they depend on too many libraries or use expensive resources (e.g. a database). + * Your tests are brittle as some resources they use are unreliable (e.g. the network). + * You want to test how your code handles a failure (e.g. a file checksum error), but it's not easy to cause one. + * You need to make sure that your module interacts with other modules in the right way, but it's hard to observe the interaction; therefore you resort to observing the side effects at the end of the action, which is awkward at best. + * You want to "mock out" your dependencies, except that they don't have mock implementations yet; and, frankly, you aren't thrilled by some of those hand-written mocks. + +We encourage you to use Google Mock as: + + * a _design_ tool, for it lets you experiment with your interface design early and often. More iterations lead to better designs! + * a _testing_ tool to cut your tests' outbound dependencies and probe the interaction between your module and its collaborators. + +# Getting Started # +Using Google Mock is easy! Inside your C++ source file, just `#include` `"gtest/gtest.h"` and `"gmock/gmock.h"`, and you are ready to go. + +# A Case for Mock Turtles # +Let's look at an example. Suppose you are developing a graphics program that relies on a LOGO-like API for drawing. How would you test that it does the right thing? Well, you can run it and compare the screen with a golden screen snapshot, but let's admit it: tests like this are expensive to run and fragile (What if you just upgraded to a shiny new graphics card that has better anti-aliasing? Suddenly you have to update all your golden images.). It would be too painful if all your tests are like this. Fortunately, you learned about Dependency Injection and know the right thing to do: instead of having your application talk to the drawing API directly, wrap the API in an interface (say, `Turtle`) and code to that interface: + +``` +class Turtle { + ... + virtual ~Turtle() {} + virtual void PenUp() = 0; + virtual void PenDown() = 0; + virtual void Forward(int distance) = 0; + virtual void Turn(int degrees) = 0; + virtual void GoTo(int x, int y) = 0; + virtual int GetX() const = 0; + virtual int GetY() const = 0; +}; +``` + +(Note that the destructor of `Turtle` **must** be virtual, as is the case for **all** classes you intend to inherit from - otherwise the destructor of the derived class will not be called when you delete an object through a base pointer, and you'll get corrupted program states like memory leaks.) + +You can control whether the turtle's movement will leave a trace using `PenUp()` and `PenDown()`, and control its movement using `Forward()`, `Turn()`, and `GoTo()`. Finally, `GetX()` and `GetY()` tell you the current position of the turtle. + +Your program will normally use a real implementation of this interface. In tests, you can use a mock implementation instead. This allows you to easily check what drawing primitives your program is calling, with what arguments, and in which order. Tests written this way are much more robust (they won't break because your new machine does anti-aliasing differently), easier to read and maintain (the intent of a test is expressed in the code, not in some binary images), and run _much, much faster_. + +# Writing the Mock Class # +If you are lucky, the mocks you need to use have already been implemented by some nice people. If, however, you find yourself in the position to write a mock class, relax - Google Mock turns this task into a fun game! (Well, almost.) + +## How to Define It ## +Using the `Turtle` interface as example, here are the simple steps you need to follow: + + 1. Derive a class `MockTurtle` from `Turtle`. + 1. Take a _virtual_ function of `Turtle` (while it's possible to [mock non-virtual methods using templates](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Mocking_Nonvirtual_Methods), it's much more involved). Count how many arguments it has. + 1. In the `public:` section of the child class, write `MOCK_METHODn();` (or `MOCK_CONST_METHODn();` if you are mocking a `const` method), where `n` is the number of the arguments; if you counted wrong, shame on you, and a compiler error will tell you so. + 1. Now comes the fun part: you take the function signature, cut-and-paste the _function name_ as the _first_ argument to the macro, and leave what's left as the _second_ argument (in case you're curious, this is the _type of the function_). + 1. Repeat until all virtual functions you want to mock are done. + +After the process, you should have something like: + +``` +#include "gmock/gmock.h" // Brings in Google Mock. +class MockTurtle : public Turtle { + public: + ... + MOCK_METHOD0(PenUp, void()); + MOCK_METHOD0(PenDown, void()); + MOCK_METHOD1(Forward, void(int distance)); + MOCK_METHOD1(Turn, void(int degrees)); + MOCK_METHOD2(GoTo, void(int x, int y)); + MOCK_CONST_METHOD0(GetX, int()); + MOCK_CONST_METHOD0(GetY, int()); +}; +``` + +You don't need to define these mock methods somewhere else - the `MOCK_METHOD*` macros will generate the definitions for you. It's that simple! Once you get the hang of it, you can pump out mock classes faster than your source-control system can handle your check-ins. + +**Tip:** If even this is too much work for you, you'll find the +`gmock_gen.py` tool in Google Mock's `scripts/generator/` directory (courtesy of the [cppclean](http://code.google.com/p/cppclean/) project) useful. This command-line +tool requires that you have Python 2.4 installed. You give it a C++ file and the name of an abstract class defined in it, +and it will print the definition of the mock class for you. Due to the +complexity of the C++ language, this script may not always work, but +it can be quite handy when it does. For more details, read the [user documentation](http://code.google.com/p/googlemock/source/browse/trunk/scripts/generator/README). + +## Where to Put It ## +When you define a mock class, you need to decide where to put its definition. Some people put it in a `*_test.cc`. This is fine when the interface being mocked (say, `Foo`) is owned by the same person or team. Otherwise, when the owner of `Foo` changes it, your test could break. (You can't really expect `Foo`'s maintainer to fix every test that uses `Foo`, can you?) + +So, the rule of thumb is: if you need to mock `Foo` and it's owned by others, define the mock class in `Foo`'s package (better, in a `testing` sub-package such that you can clearly separate production code and testing utilities), and put it in a `mock_foo.h`. Then everyone can reference `mock_foo.h` from their tests. If `Foo` ever changes, there is only one copy of `MockFoo` to change, and only tests that depend on the changed methods need to be fixed. + +Another way to do it: you can introduce a thin layer `FooAdaptor` on top of `Foo` and code to this new interface. Since you own `FooAdaptor`, you can absorb changes in `Foo` much more easily. While this is more work initially, carefully choosing the adaptor interface can make your code easier to write and more readable (a net win in the long run), as you can choose `FooAdaptor` to fit your specific domain much better than `Foo` does. + +# Using Mocks in Tests # +Once you have a mock class, using it is easy. The typical work flow is: + + 1. Import the Google Mock names from the `testing` namespace such that you can use them unqualified (You only have to do it once per file. Remember that namespaces are a good idea and good for your health.). + 1. Create some mock objects. + 1. Specify your expectations on them (How many times will a method be called? With what arguments? What should it do? etc.). + 1. Exercise some code that uses the mocks; optionally, check the result using Google Test assertions. If a mock method is called more than expected or with wrong arguments, you'll get an error immediately. + 1. When a mock is destructed, Google Mock will automatically check whether all expectations on it have been satisfied. + +Here's an example: + +``` +#include "path/to/mock-turtle.h" +#include "gmock/gmock.h" +#include "gtest/gtest.h" +using ::testing::AtLeast; // #1 + +TEST(PainterTest, CanDrawSomething) { + MockTurtle turtle; // #2 + EXPECT_CALL(turtle, PenDown()) // #3 + .Times(AtLeast(1)); + + Painter painter(&turtle); // #4 + + EXPECT_TRUE(painter.DrawCircle(0, 0, 10)); +} // #5 + +int main(int argc, char** argv) { + // The following line must be executed to initialize Google Mock + // (and Google Test) before running the tests. + ::testing::InitGoogleMock(&argc, argv); + return RUN_ALL_TESTS(); +} +``` + +As you might have guessed, this test checks that `PenDown()` is called at least once. If the `painter` object didn't call this method, your test will fail with a message like this: + +``` +path/to/my_test.cc:119: Failure +Actual function call count doesn't match this expectation: +Actually: never called; +Expected: called at least once. +``` + +**Tip 1:** If you run the test from an Emacs buffer, you can hit `` on the line number displayed in the error message to jump right to the failed expectation. + +**Tip 2:** If your mock objects are never deleted, the final verification won't happen. Therefore it's a good idea to use a heap leak checker in your tests when you allocate mocks on the heap. + +**Important note:** Google Mock requires expectations to be set **before** the mock functions are called, otherwise the behavior is **undefined**. In particular, you mustn't interleave `EXPECT_CALL()`s and calls to the mock functions. + +This means `EXPECT_CALL()` should be read as expecting that a call will occur _in the future_, not that a call has occurred. Why does Google Mock work like that? Well, specifying the expectation beforehand allows Google Mock to report a violation as soon as it arises, when the context (stack trace, etc) is still available. This makes debugging much easier. + +Admittedly, this test is contrived and doesn't do much. You can easily achieve the same effect without using Google Mock. However, as we shall reveal soon, Google Mock allows you to do _much more_ with the mocks. + +## Using Google Mock with Any Testing Framework ## +If you want to use something other than Google Test (e.g. [CppUnit](http://apps.sourceforge.net/mediawiki/cppunit/index.php?title=Main_Page) or +[CxxTest](http://cxxtest.tigris.org/)) as your testing framework, just change the `main()` function in the previous section to: +``` +int main(int argc, char** argv) { + // The following line causes Google Mock to throw an exception on failure, + // which will be interpreted by your testing framework as a test failure. + ::testing::GTEST_FLAG(throw_on_failure) = true; + ::testing::InitGoogleMock(&argc, argv); + ... whatever your testing framework requires ... +} +``` + +This approach has a catch: it makes Google Mock throw an exception +from a mock object's destructor sometimes. With some compilers, this +sometimes causes the test program to crash. You'll still be able to +notice that the test has failed, but it's not a graceful failure. + +A better solution is to use Google Test's +[event listener API](http://code.google.com/p/googletest/wiki/AdvancedGuide#Extending_Google_Test_by_Handling_Test_Events) +to report a test failure to your testing framework properly. You'll need to +implement the `OnTestPartResult()` method of the event listener interface, but it +should be straightforward. + +If this turns out to be too much work, we suggest that you stick with +Google Test, which works with Google Mock seamlessly (in fact, it is +technically part of Google Mock.). If there is a reason that you +cannot use Google Test, please let us know. + +# Setting Expectations # +The key to using a mock object successfully is to set the _right expectations_ on it. If you set the expectations too strict, your test will fail as the result of unrelated changes. If you set them too loose, bugs can slip through. You want to do it just right such that your test can catch exactly the kind of bugs you intend it to catch. Google Mock provides the necessary means for you to do it "just right." + +## General Syntax ## +In Google Mock we use the `EXPECT_CALL()` macro to set an expectation on a mock method. The general syntax is: + +``` +EXPECT_CALL(mock_object, method(matchers)) + .Times(cardinality) + .WillOnce(action) + .WillRepeatedly(action); +``` + +The macro has two arguments: first the mock object, and then the method and its arguments. Note that the two are separated by a comma (`,`), not a period (`.`). (Why using a comma? The answer is that it was necessary for technical reasons.) + +The macro can be followed by some optional _clauses_ that provide more information about the expectation. We'll discuss how each clause works in the coming sections. + +This syntax is designed to make an expectation read like English. For example, you can probably guess that + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .Times(5) + .WillOnce(Return(100)) + .WillOnce(Return(150)) + .WillRepeatedly(Return(200)); +``` + +says that the `turtle` object's `GetX()` method will be called five times, it will return 100 the first time, 150 the second time, and then 200 every time. Some people like to call this style of syntax a Domain-Specific Language (DSL). + +**Note:** Why do we use a macro to do this? It serves two purposes: first it makes expectations easily identifiable (either by `grep` or by a human reader), and second it allows Google Mock to include the source file location of a failed expectation in messages, making debugging easier. + +## Matchers: What Arguments Do We Expect? ## +When a mock function takes arguments, we must specify what arguments we are expecting; for example: + +``` +// Expects the turtle to move forward by 100 units. +EXPECT_CALL(turtle, Forward(100)); +``` + +Sometimes you may not want to be too specific (Remember that talk about tests being too rigid? Over specification leads to brittle tests and obscures the intent of tests. Therefore we encourage you to specify only what's necessary - no more, no less.). If you care to check that `Forward()` will be called but aren't interested in its actual argument, write `_` as the argument, which means "anything goes": + +``` +using ::testing::_; +... +// Expects the turtle to move forward. +EXPECT_CALL(turtle, Forward(_)); +``` + +`_` is an instance of what we call **matchers**. A matcher is like a predicate and can test whether an argument is what we'd expect. You can use a matcher inside `EXPECT_CALL()` wherever a function argument is expected. + +A list of built-in matchers can be found in the [CheatSheet](V1_7_CheatSheet.md). For example, here's the `Ge` (greater than or equal) matcher: + +``` +using ::testing::Ge;... +EXPECT_CALL(turtle, Forward(Ge(100))); +``` + +This checks that the turtle will be told to go forward by at least 100 units. + +## Cardinalities: How Many Times Will It Be Called? ## +The first clause we can specify following an `EXPECT_CALL()` is `Times()`. We call its argument a **cardinality** as it tells _how many times_ the call should occur. It allows us to repeat an expectation many times without actually writing it as many times. More importantly, a cardinality can be "fuzzy", just like a matcher can be. This allows a user to express the intent of a test exactly. + +An interesting special case is when we say `Times(0)`. You may have guessed - it means that the function shouldn't be called with the given arguments at all, and Google Mock will report a Google Test failure whenever the function is (wrongfully) called. + +We've seen `AtLeast(n)` as an example of fuzzy cardinalities earlier. For the list of built-in cardinalities you can use, see the [CheatSheet](V1_7_CheatSheet.md). + +The `Times()` clause can be omitted. **If you omit `Times()`, Google Mock will infer the cardinality for you.** The rules are easy to remember: + + * If **neither** `WillOnce()` **nor** `WillRepeatedly()` is in the `EXPECT_CALL()`, the inferred cardinality is `Times(1)`. + * If there are `n WillOnce()`'s but **no** `WillRepeatedly()`, where `n` >= 1, the cardinality is `Times(n)`. + * If there are `n WillOnce()`'s and **one** `WillRepeatedly()`, where `n` >= 0, the cardinality is `Times(AtLeast(n))`. + +**Quick quiz:** what do you think will happen if a function is expected to be called twice but actually called four times? + +## Actions: What Should It Do? ## +Remember that a mock object doesn't really have a working implementation? We as users have to tell it what to do when a method is invoked. This is easy in Google Mock. + +First, if the return type of a mock function is a built-in type or a pointer, the function has a **default action** (a `void` function will just return, a `bool` function will return `false`, and other functions will return 0). If you don't say anything, this behavior will be used. + +Second, if a mock function doesn't have a default action, or the default action doesn't suit you, you can specify the action to be taken each time the expectation matches using a series of `WillOnce()` clauses followed by an optional `WillRepeatedly()`. For example, + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillOnce(Return(300)); +``` + +This says that `turtle.GetX()` will be called _exactly three times_ (Google Mock inferred this from how many `WillOnce()` clauses we've written, since we didn't explicitly write `Times()`), and will return 100, 200, and 300 respectively. + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) + .WillOnce(Return(100)) + .WillOnce(Return(200)) + .WillRepeatedly(Return(300)); +``` + +says that `turtle.GetY()` will be called _at least twice_ (Google Mock knows this as we've written two `WillOnce()` clauses and a `WillRepeatedly()` while having no explicit `Times()`), will return 100 the first time, 200 the second time, and 300 from the third time on. + +Of course, if you explicitly write a `Times()`, Google Mock will not try to infer the cardinality itself. What if the number you specified is larger than there are `WillOnce()` clauses? Well, after all `WillOnce()`s are used up, Google Mock will do the _default_ action for the function every time (unless, of course, you have a `WillRepeatedly()`.). + +What can we do inside `WillOnce()` besides `Return()`? You can return a reference using `ReturnRef(variable)`, or invoke a pre-defined function, among [others](http://code.google.com/p/googlemock/wiki/V1_7_CheatSheet#Actions). + +**Important note:** The `EXPECT_CALL()` statement evaluates the action clause only once, even though the action may be performed many times. Therefore you must be careful about side effects. The following may not do what you want: + +``` +int n = 100; +EXPECT_CALL(turtle, GetX()) +.Times(4) +.WillRepeatedly(Return(n++)); +``` + +Instead of returning 100, 101, 102, ..., consecutively, this mock function will always return 100 as `n++` is only evaluated once. Similarly, `Return(new Foo)` will create a new `Foo` object when the `EXPECT_CALL()` is executed, and will return the same pointer every time. If you want the side effect to happen every time, you need to define a custom action, which we'll teach in the [CookBook](V1_7_CookBook.md). + +Time for another quiz! What do you think the following means? + +``` +using ::testing::Return;... +EXPECT_CALL(turtle, GetY()) +.Times(4) +.WillOnce(Return(100)); +``` + +Obviously `turtle.GetY()` is expected to be called four times. But if you think it will return 100 every time, think twice! Remember that one `WillOnce()` clause will be consumed each time the function is invoked and the default action will be taken afterwards. So the right answer is that `turtle.GetY()` will return 100 the first time, but **return 0 from the second time on**, as returning 0 is the default action for `int` functions. + +## Using Multiple Expectations ## +So far we've only shown examples where you have a single expectation. More realistically, you're going to specify expectations on multiple mock methods, which may be from multiple mock objects. + +By default, when a mock method is invoked, Google Mock will search the expectations in the **reverse order** they are defined, and stop when an active expectation that matches the arguments is found (you can think of it as "newer rules override older ones."). If the matching expectation cannot take any more calls, you will get an upper-bound-violated failure. Here's an example: + +``` +using ::testing::_;... +EXPECT_CALL(turtle, Forward(_)); // #1 +EXPECT_CALL(turtle, Forward(10)) // #2 + .Times(2); +``` + +If `Forward(10)` is called three times in a row, the third time it will be an error, as the last matching expectation (#2) has been saturated. If, however, the third `Forward(10)` call is replaced by `Forward(20)`, then it would be OK, as now #1 will be the matching expectation. + +**Side note:** Why does Google Mock search for a match in the _reverse_ order of the expectations? The reason is that this allows a user to set up the default expectations in a mock object's constructor or the test fixture's set-up phase and then customize the mock by writing more specific expectations in the test body. So, if you have two expectations on the same method, you want to put the one with more specific matchers **after** the other, or the more specific rule would be shadowed by the more general one that comes after it. + +## Ordered vs Unordered Calls ## +By default, an expectation can match a call even though an earlier expectation hasn't been satisfied. In other words, the calls don't have to occur in the order the expectations are specified. + +Sometimes, you may want all the expected calls to occur in a strict order. To say this in Google Mock is easy: + +``` +using ::testing::InSequence;... +TEST(FooTest, DrawsLineSegment) { + ... + { + InSequence dummy; + + EXPECT_CALL(turtle, PenDown()); + EXPECT_CALL(turtle, Forward(100)); + EXPECT_CALL(turtle, PenUp()); + } + Foo(); +} +``` + +By creating an object of type `InSequence`, all expectations in its scope are put into a _sequence_ and have to occur _sequentially_. Since we are just relying on the constructor and destructor of this object to do the actual work, its name is really irrelevant. + +In this example, we test that `Foo()` calls the three expected functions in the order as written. If a call is made out-of-order, it will be an error. + +(What if you care about the relative order of some of the calls, but not all of them? Can you specify an arbitrary partial order? The answer is ... yes! If you are impatient, the details can be found in the [CookBook](V1_7_CookBook#Expecting_Partially_Ordered_Calls.md).) + +## All Expectations Are Sticky (Unless Said Otherwise) ## +Now let's do a quick quiz to see how well you can use this mock stuff already. How would you test that the turtle is asked to go to the origin _exactly twice_ (you want to ignore any other instructions it receives)? + +After you've come up with your answer, take a look at ours and compare notes (solve it yourself first - don't cheat!): + +``` +using ::testing::_;... +EXPECT_CALL(turtle, GoTo(_, _)) // #1 + .Times(AnyNumber()); +EXPECT_CALL(turtle, GoTo(0, 0)) // #2 + .Times(2); +``` + +Suppose `turtle.GoTo(0, 0)` is called three times. In the third time, Google Mock will see that the arguments match expectation #2 (remember that we always pick the last matching expectation). Now, since we said that there should be only two such calls, Google Mock will report an error immediately. This is basically what we've told you in the "Using Multiple Expectations" section above. + +This example shows that **expectations in Google Mock are "sticky" by default**, in the sense that they remain active even after we have reached their invocation upper bounds. This is an important rule to remember, as it affects the meaning of the spec, and is **different** to how it's done in many other mocking frameworks (Why'd we do that? Because we think our rule makes the common cases easier to express and understand.). + +Simple? Let's see if you've really understood it: what does the following code say? + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)); +} +``` + +If you think it says that `turtle.GetX()` will be called `n` times and will return 10, 20, 30, ..., consecutively, think twice! The problem is that, as we said, expectations are sticky. So, the second time `turtle.GetX()` is called, the last (latest) `EXPECT_CALL()` statement will match, and will immediately lead to an "upper bound exceeded" error - this piece of code is not very useful! + +One correct way of saying that `turtle.GetX()` will return 10, 20, 30, ..., is to explicitly say that the expectations are _not_ sticky. In other words, they should _retire_ as soon as they are saturated: + +``` +using ::testing::Return; +... +for (int i = n; i > 0; i--) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); +} +``` + +And, there's a better way to do it: in this case, we expect the calls to occur in a specific order, and we line up the actions to match the order. Since the order is important here, we should make it explicit using a sequence: + +``` +using ::testing::InSequence; +using ::testing::Return; +... +{ + InSequence s; + + for (int i = 1; i <= n; i++) { + EXPECT_CALL(turtle, GetX()) + .WillOnce(Return(10*i)) + .RetiresOnSaturation(); + } +} +``` + +By the way, the other situation where an expectation may _not_ be sticky is when it's in a sequence - as soon as another expectation that comes after it in the sequence has been used, it automatically retires (and will never be used to match any call). + +## Uninteresting Calls ## +A mock object may have many methods, and not all of them are that interesting. For example, in some tests we may not care about how many times `GetX()` and `GetY()` get called. + +In Google Mock, if you are not interested in a method, just don't say anything about it. If a call to this method occurs, you'll see a warning in the test output, but it won't be a failure. + +# What Now? # +Congratulations! You've learned enough about Google Mock to start using it. Now, you might want to join the [googlemock](http://groups.google.com/group/googlemock) discussion group and actually write some tests using Google Mock - it will be fun. Hey, it may even be addictive - you've been warned. + +Then, if you feel like increasing your mock quotient, you should move on to the [CookBook](V1_7_CookBook.md). You can learn many advanced features of Google Mock there -- and advance your level of enjoyment and testing bliss. \ No newline at end of file diff --git a/googlemock/docs/v1_7/FrequentlyAskedQuestions.md b/googlemock/docs/v1_7/FrequentlyAskedQuestions.md new file mode 100644 index 0000000..fa21233 --- /dev/null +++ b/googlemock/docs/v1_7/FrequentlyAskedQuestions.md @@ -0,0 +1,628 @@ + + +Please send your questions to the +[googlemock](http://groups.google.com/group/googlemock) discussion +group. If you need help with compiler errors, make sure you have +tried [Google Mock Doctor](#How_am_I_supposed_to_make_sense_of_these_horrible_template_error.md) first. + +## When I call a method on my mock object, the method for the real object is invoked instead. What's the problem? ## + +In order for a method to be mocked, it must be _virtual_, unless you use the [high-perf dependency injection technique](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Mocking_Nonvirtual_Methods). + +## I wrote some matchers. After I upgraded to a new version of Google Mock, they no longer compile. What's going on? ## + +After version 1.4.0 of Google Mock was released, we had an idea on how +to make it easier to write matchers that can generate informative +messages efficiently. We experimented with this idea and liked what +we saw. Therefore we decided to implement it. + +Unfortunately, this means that if you have defined your own matchers +by implementing `MatcherInterface` or using `MakePolymorphicMatcher()`, +your definitions will no longer compile. Matchers defined using the +`MATCHER*` family of macros are not affected. + +Sorry for the hassle if your matchers are affected. We believe it's +in everyone's long-term interest to make this change sooner than +later. Fortunately, it's usually not hard to migrate an existing +matcher to the new API. Here's what you need to do: + +If you wrote your matcher like this: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` + +you'll need to change it to: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + ... +}; +``` +(i.e. rename `Matches()` to `MatchAndExplain()` and give it a second +argument of type `MatchResultListener*`.) + +If you were also using `ExplainMatchResultTo()` to improve the matcher +message: +``` +// Old matcher definition that doesn't work with the lastest +// Google Mock. +using ::testing::MatcherInterface; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetFoo() > 5; + } + + virtual void ExplainMatchResultTo(MyType value, + ::std::ostream* os) const { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Foo property is " << value.GetFoo(); + } + ... +}; +``` + +you should move the logic of `ExplainMatchResultTo()` into +`MatchAndExplain()`, using the `MatchResultListener` argument where +the `::std::ostream` was used: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MatcherInterface; +using ::testing::MatchResultListener; +... +class MyWonderfulMatcher : public MatcherInterface { + public: + ... + virtual bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Foo property is " << value.GetFoo(); + return value.GetFoo() > 5; + } + ... +}; +``` + +If your matcher is defined using `MakePolymorphicMatcher()`: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you should rename the `Matches()` method to `MatchAndExplain()` and +add a `MatchResultListener*` argument (the same as what you need to do +for matchers defined by implementing `MatcherInterface`): +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +If your polymorphic matcher uses `ExplainMatchResultTo()` for better +failure messages: +``` +// Old matcher definition that doesn't work with the latest +// Google Mock. +using ::testing::MakePolymorphicMatcher; +... +class MyGreatMatcher { + public: + ... + bool Matches(MyType value) const { + // Returns true if value matches. + return value.GetBar() < 42; + } + ... +}; +void ExplainMatchResultTo(const MyGreatMatcher& matcher, + MyType value, + ::std::ostream* os) { + // Prints some helpful information to os to help + // a user understand why value matches (or doesn't match). + *os << "the Bar property is " << value.GetBar(); +} +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +you'll need to move the logic inside `ExplainMatchResultTo()` to +`MatchAndExplain()`: +``` +// New matcher definition that works with the latest Google Mock. +using ::testing::MakePolymorphicMatcher; +using ::testing::MatchResultListener; +... +class MyGreatMatcher { + public: + ... + bool MatchAndExplain(MyType value, + MatchResultListener* listener) const { + // Returns true if value matches. + *listener << "the Bar property is " << value.GetBar(); + return value.GetBar() < 42; + } + ... +}; +... MakePolymorphicMatcher(MyGreatMatcher()) ... +``` + +For more information, you can read these +[two](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Writing_New_Monomorphic_Matchers) +[recipes](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Writing_New_Polymorphic_Matchers) +from the cookbook. As always, you +are welcome to post questions on `googlemock@googlegroups.com` if you +need any help. + +## When using Google Mock, do I have to use Google Test as the testing framework? I have my favorite testing framework and don't want to switch. ## + +Google Mock works out of the box with Google Test. However, it's easy +to configure it to work with any testing framework of your choice. +[Here](http://code.google.com/p/googlemock/wiki/V1_7_ForDummies#Using_Google_Mock_with_Any_Testing_Framework) is how. + +## How am I supposed to make sense of these horrible template errors? ## + +If you are confused by the compiler errors gcc threw at you, +try consulting the _Google Mock Doctor_ tool first. What it does is to +scan stdin for gcc error messages, and spit out diagnoses on the +problems (we call them diseases) your code has. + +To "install", run command: +``` +alias gmd='/scripts/gmock_doctor.py' +``` + +To use it, do: +``` + 2>&1 | gmd +``` + +For example: +``` +make my_test 2>&1 | gmd +``` + +Or you can run `gmd` and copy-n-paste gcc's error messages to it. + +## Can I mock a variadic function? ## + +You cannot mock a variadic function (i.e. a function taking ellipsis +(`...`) arguments) directly in Google Mock. + +The problem is that in general, there is _no way_ for a mock object to +know how many arguments are passed to the variadic method, and what +the arguments' types are. Only the _author of the base class_ knows +the protocol, and we cannot look into his head. + +Therefore, to mock such a function, the _user_ must teach the mock +object how to figure out the number of arguments and their types. One +way to do it is to provide overloaded versions of the function. + +Ellipsis arguments are inherited from C and not really a C++ feature. +They are unsafe to use and don't work with arguments that have +constructors or destructors. Therefore we recommend to avoid them in +C++ as much as possible. + +## MSVC gives me warning C4301 or C4373 when I define a mock method with a const parameter. Why? ## + +If you compile this using Microsoft Visual C++ 2005 SP1: +``` +class Foo { + ... + virtual void Bar(const int i) = 0; +}; + +class MockFoo : public Foo { + ... + MOCK_METHOD1(Bar, void(const int i)); +}; +``` +You may get the following warning: +``` +warning C4301: 'MockFoo::Bar': overriding virtual function only differs from 'Foo::Bar' by const/volatile qualifier +``` + +This is a MSVC bug. The same code compiles fine with gcc ,for +example. If you use Visual C++ 2008 SP1, you would get the warning: +``` +warning C4373: 'MockFoo::Bar': virtual function overrides 'Foo::Bar', previous versions of the compiler did not override when parameters only differed by const/volatile qualifiers +``` + +In C++, if you _declare_ a function with a `const` parameter, the +`const` modifier is _ignored_. Therefore, the `Foo` base class above +is equivalent to: +``` +class Foo { + ... + virtual void Bar(int i) = 0; // int or const int? Makes no difference. +}; +``` + +In fact, you can _declare_ Bar() with an `int` parameter, and _define_ +it with a `const int` parameter. The compiler will still match them +up. + +Since making a parameter `const` is meaningless in the method +_declaration_, we recommend to remove it in both `Foo` and `MockFoo`. +That should workaround the VC bug. + +Note that we are talking about the _top-level_ `const` modifier here. +If the function parameter is passed by pointer or reference, declaring +the _pointee_ or _referee_ as `const` is still meaningful. For +example, the following two declarations are _not_ equivalent: +``` +void Bar(int* p); // Neither p nor *p is const. +void Bar(const int* p); // p is not const, but *p is. +``` + +## I have a huge mock class, and Microsoft Visual C++ runs out of memory when compiling it. What can I do? ## + +We've noticed that when the `/clr` compiler flag is used, Visual C++ +uses 5~6 times as much memory when compiling a mock class. We suggest +to avoid `/clr` when compiling native C++ mocks. + +## I can't figure out why Google Mock thinks my expectations are not satisfied. What should I do? ## + +You might want to run your test with +`--gmock_verbose=info`. This flag lets Google Mock print a trace +of every mock function call it receives. By studying the trace, +you'll gain insights on why the expectations you set are not met. + +## How can I assert that a function is NEVER called? ## + +``` +EXPECT_CALL(foo, Bar(_)) + .Times(0); +``` + +## I have a failed test where Google Mock tells me TWICE that a particular expectation is not satisfied. Isn't this redundant? ## + +When Google Mock detects a failure, it prints relevant information +(the mock function arguments, the state of relevant expectations, and +etc) to help the user debug. If another failure is detected, Google +Mock will do the same, including printing the state of relevant +expectations. + +Sometimes an expectation's state didn't change between two failures, +and you'll see the same description of the state twice. They are +however _not_ redundant, as they refer to _different points in time_. +The fact they are the same _is_ interesting information. + +## I get a heap check failure when using a mock object, but using a real object is fine. What can be wrong? ## + +Does the class (hopefully a pure interface) you are mocking have a +virtual destructor? + +Whenever you derive from a base class, make sure its destructor is +virtual. Otherwise Bad Things will happen. Consider the following +code: + +``` +class Base { + public: + // Not virtual, but should be. + ~Base() { ... } + ... +}; + +class Derived : public Base { + public: + ... + private: + std::string value_; +}; + +... + Base* p = new Derived; + ... + delete p; // Surprise! ~Base() will be called, but ~Derived() will not + // - value_ is leaked. +``` + +By changing `~Base()` to virtual, `~Derived()` will be correctly +called when `delete p` is executed, and the heap checker +will be happy. + +## The "newer expectations override older ones" rule makes writing expectations awkward. Why does Google Mock do that? ## + +When people complain about this, often they are referring to code like: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. However, I have to write the expectations in the +// reverse order. This sucks big time!!! +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); +``` + +The problem is that they didn't pick the **best** way to express the test's +intent. + +By default, expectations don't have to be matched in _any_ particular +order. If you want them to match in a certain order, you need to be +explicit. This is Google Mock's (and jMock's) fundamental philosophy: it's +easy to accidentally over-specify your tests, and we want to make it +harder to do so. + +There are two better ways to write the test spec. You could either +put the expectations in sequence: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. Using a sequence, we can write the expectations +// in their natural order. +{ + InSequence s; + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .RetiresOnSaturation(); + EXPECT_CALL(foo, Bar()) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +} +``` + +or you can put the sequence of actions in the same expectation: + +``` +// foo.Bar() should be called twice, return 1 the first time, and return +// 2 the second time. +EXPECT_CALL(foo, Bar()) + .WillOnce(Return(1)) + .WillOnce(Return(2)) + .RetiresOnSaturation(); +``` + +Back to the original questions: why does Google Mock search the +expectations (and `ON_CALL`s) from back to front? Because this +allows a user to set up a mock's behavior for the common case early +(e.g. in the mock's constructor or the test fixture's set-up phase) +and customize it with more specific rules later. If Google Mock +searches from front to back, this very useful pattern won't be +possible. + +## Google Mock prints a warning when a function without EXPECT\_CALL is called, even if I have set its behavior using ON\_CALL. Would it be reasonable not to show the warning in this case? ## + +When choosing between being neat and being safe, we lean toward the +latter. So the answer is that we think it's better to show the +warning. + +Often people write `ON_CALL`s in the mock object's +constructor or `SetUp()`, as the default behavior rarely changes from +test to test. Then in the test body they set the expectations, which +are often different for each test. Having an `ON_CALL` in the set-up +part of a test doesn't mean that the calls are expected. If there's +no `EXPECT_CALL` and the method is called, it's possibly an error. If +we quietly let the call go through without notifying the user, bugs +may creep in unnoticed. + +If, however, you are sure that the calls are OK, you can write + +``` +EXPECT_CALL(foo, Bar(_)) + .WillRepeatedly(...); +``` + +instead of + +``` +ON_CALL(foo, Bar(_)) + .WillByDefault(...); +``` + +This tells Google Mock that you do expect the calls and no warning should be +printed. + +Also, you can control the verbosity using the `--gmock_verbose` flag. +If you find the output too noisy when debugging, just choose a less +verbose level. + +## How can I delete the mock function's argument in an action? ## + +If you find yourself needing to perform some action that's not +supported by Google Mock directly, remember that you can define your own +actions using +[MakeAction()](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Writing_New_Actions) or +[MakePolymorphicAction()](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Writing_New_Polymorphic_Actions), +or you can write a stub function and invoke it using +[Invoke()](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Using_Functions_Methods_Functors). + +## MOCK\_METHODn()'s second argument looks funny. Why don't you use the MOCK\_METHODn(Method, return\_type, arg\_1, ..., arg\_n) syntax? ## + +What?! I think it's beautiful. :-) + +While which syntax looks more natural is a subjective matter to some +extent, Google Mock's syntax was chosen for several practical advantages it +has. + +Try to mock a function that takes a map as an argument: +``` +virtual int GetSize(const map& m); +``` + +Using the proposed syntax, it would be: +``` +MOCK_METHOD1(GetSize, int, const map& m); +``` + +Guess what? You'll get a compiler error as the compiler thinks that +`const map& m` are **two**, not one, arguments. To work +around this you can use `typedef` to give the map type a name, but +that gets in the way of your work. Google Mock's syntax avoids this +problem as the function's argument types are protected inside a pair +of parentheses: +``` +// This compiles fine. +MOCK_METHOD1(GetSize, int(const map& m)); +``` + +You still need a `typedef` if the return type contains an unprotected +comma, but that's much rarer. + +Other advantages include: + 1. `MOCK_METHOD1(Foo, int, bool)` can leave a reader wonder whether the method returns `int` or `bool`, while there won't be such confusion using Google Mock's syntax. + 1. The way Google Mock describes a function type is nothing new, although many people may not be familiar with it. The same syntax was used in C, and the `function` library in `tr1` uses this syntax extensively. Since `tr1` will become a part of the new version of STL, we feel very comfortable to be consistent with it. + 1. The function type syntax is also used in other parts of Google Mock's API (e.g. the action interface) in order to make the implementation tractable. A user needs to learn it anyway in order to utilize Google Mock's more advanced features. We'd as well stick to the same syntax in `MOCK_METHOD*`! + +## My code calls a static/global function. Can I mock it? ## + +You can, but you need to make some changes. + +In general, if you find yourself needing to mock a static function, +it's a sign that your modules are too tightly coupled (and less +flexible, less reusable, less testable, etc). You are probably better +off defining a small interface and call the function through that +interface, which then can be easily mocked. It's a bit of work +initially, but usually pays for itself quickly. + +This Google Testing Blog +[post](http://googletesting.blogspot.com/2008/06/defeat-static-cling.html) +says it excellently. Check it out. + +## My mock object needs to do complex stuff. It's a lot of pain to specify the actions. Google Mock sucks! ## + +I know it's not a question, but you get an answer for free any way. :-) + +With Google Mock, you can create mocks in C++ easily. And people might be +tempted to use them everywhere. Sometimes they work great, and +sometimes you may find them, well, a pain to use. So, what's wrong in +the latter case? + +When you write a test without using mocks, you exercise the code and +assert that it returns the correct value or that the system is in an +expected state. This is sometimes called "state-based testing". + +Mocks are great for what some call "interaction-based" testing: +instead of checking the system state at the very end, mock objects +verify that they are invoked the right way and report an error as soon +as it arises, giving you a handle on the precise context in which the +error was triggered. This is often more effective and economical to +do than state-based testing. + +If you are doing state-based testing and using a test double just to +simulate the real object, you are probably better off using a fake. +Using a mock in this case causes pain, as it's not a strong point for +mocks to perform complex actions. If you experience this and think +that mocks suck, you are just not using the right tool for your +problem. Or, you might be trying to solve the wrong problem. :-) + +## I got a warning "Uninteresting function call encountered - default action taken.." Should I panic? ## + +By all means, NO! It's just an FYI. + +What it means is that you have a mock function, you haven't set any +expectations on it (by Google Mock's rule this means that you are not +interested in calls to this function and therefore it can be called +any number of times), and it is called. That's OK - you didn't say +it's not OK to call the function! + +What if you actually meant to disallow this function to be called, but +forgot to write `EXPECT_CALL(foo, Bar()).Times(0)`? While +one can argue that it's the user's fault, Google Mock tries to be nice and +prints you a note. + +So, when you see the message and believe that there shouldn't be any +uninteresting calls, you should investigate what's going on. To make +your life easier, Google Mock prints the function name and arguments +when an uninteresting call is encountered. + +## I want to define a custom action. Should I use Invoke() or implement the action interface? ## + +Either way is fine - you want to choose the one that's more convenient +for your circumstance. + +Usually, if your action is for a particular function type, defining it +using `Invoke()` should be easier; if your action can be used in +functions of different types (e.g. if you are defining +`Return(value)`), `MakePolymorphicAction()` is +easiest. Sometimes you want precise control on what types of +functions the action can be used in, and implementing +`ActionInterface` is the way to go here. See the implementation of +`Return()` in `include/gmock/gmock-actions.h` for an example. + +## I'm using the set-argument-pointee action, and the compiler complains about "conflicting return type specified". What does it mean? ## + +You got this error as Google Mock has no idea what value it should return +when the mock method is called. `SetArgPointee()` says what the +side effect is, but doesn't say what the return value should be. You +need `DoAll()` to chain a `SetArgPointee()` with a `Return()`. + +See this [recipe](http://code.google.com/p/googlemock/wiki/V1_7_CookBook#Mocking_Side_Effects) for more details and an example. + + +## My question is not in your FAQ! ## + +If you cannot find the answer to your question in this FAQ, there are +some other resources you can use: + + 1. read other [wiki pages](http://code.google.com/p/googlemock/w/list), + 1. search the mailing list [archive](http://groups.google.com/group/googlemock/topics), + 1. ask it on [googlemock@googlegroups.com](mailto:googlemock@googlegroups.com) and someone will answer it (to prevent spam, we require you to join the [discussion group](http://groups.google.com/group/googlemock) before you can post.). + +Please note that creating an issue in the +[issue tracker](http://code.google.com/p/googlemock/issues/list) is _not_ +a good way to get your answer, as it is monitored infrequently by a +very small number of people. + +When asking a question, it's helpful to provide as much of the +following information as possible (people cannot help you if there's +not enough information in your question): + + * the version (or the revision number if you check out from SVN directly) of Google Mock you use (Google Mock is under active development, so it's possible that your problem has been solved in a later version), + * your operating system, + * the name and version of your compiler, + * the complete command line flags you give to your compiler, + * the complete compiler error messages (if the question is about compilation), + * the _actual_ code (ideally, a minimal but complete program) that has the problem you encounter. \ No newline at end of file diff --git a/googlemock/include/gmock/gmock-actions.h b/googlemock/include/gmock/gmock-actions.h new file mode 100644 index 0000000..b3f654a --- /dev/null +++ b/googlemock/include/gmock/gmock-actions.h @@ -0,0 +1,1205 @@ +// Copyright 2007, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements some commonly used actions. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_ACTIONS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_ACTIONS_H_ + +#ifndef _WIN32_WCE +# include +#endif + +#include +#include + +#include "gmock/internal/gmock-internal-utils.h" +#include "gmock/internal/gmock-port.h" + +#if GTEST_HAS_STD_TYPE_TRAITS_ // Defined by gtest-port.h via gmock-port.h. +#include +#endif + +namespace testing { + +// To implement an action Foo, define: +// 1. a class FooAction that implements the ActionInterface interface, and +// 2. a factory function that creates an Action object from a +// const FooAction*. +// +// The two-level delegation design follows that of Matcher, providing +// consistency for extension developers. It also eases ownership +// management as Action objects can now be copied like plain values. + +namespace internal { + +template +class ActionAdaptor; + +// BuiltInDefaultValueGetter::Get() returns a +// default-constructed T value. BuiltInDefaultValueGetter::Get() crashes with an error. +// +// This primary template is used when kDefaultConstructible is true. +template +struct BuiltInDefaultValueGetter { + static T Get() { return T(); } +}; +template +struct BuiltInDefaultValueGetter { + static T Get() { + Assert(false, __FILE__, __LINE__, + "Default action undefined for the function return type."); + return internal::Invalid(); + // The above statement will never be reached, but is required in + // order for this function to compile. + } +}; + +// BuiltInDefaultValue::Get() returns the "built-in" default value +// for type T, which is NULL when T is a raw pointer type, 0 when T is +// a numeric type, false when T is bool, or "" when T is string or +// std::string. In addition, in C++11 and above, it turns a +// default-constructed T value if T is default constructible. For any +// other type T, the built-in default T value is undefined, and the +// function will abort the process. +template +class BuiltInDefaultValue { + public: +#if GTEST_HAS_STD_TYPE_TRAITS_ + // This function returns true iff type T has a built-in default value. + static bool Exists() { + return ::std::is_default_constructible::value; + } + + static T Get() { + return BuiltInDefaultValueGetter< + T, ::std::is_default_constructible::value>::Get(); + } + +#else // GTEST_HAS_STD_TYPE_TRAITS_ + // This function returns true iff type T has a built-in default value. + static bool Exists() { + return false; + } + + static T Get() { + return BuiltInDefaultValueGetter::Get(); + } + +#endif // GTEST_HAS_STD_TYPE_TRAITS_ +}; + +// This partial specialization says that we use the same built-in +// default value for T and const T. +template +class BuiltInDefaultValue { + public: + static bool Exists() { return BuiltInDefaultValue::Exists(); } + static T Get() { return BuiltInDefaultValue::Get(); } +}; + +// This partial specialization defines the default values for pointer +// types. +template +class BuiltInDefaultValue { + public: + static bool Exists() { return true; } + static T* Get() { return NULL; } +}; + +// The following specializations define the default values for +// specific types we care about. +#define GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(type, value) \ + template <> \ + class BuiltInDefaultValue { \ + public: \ + static bool Exists() { return true; } \ + static type Get() { return value; } \ + } + +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(void, ); // NOLINT +#if GTEST_HAS_GLOBAL_STRING +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(::string, ""); +#endif // GTEST_HAS_GLOBAL_STRING +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(::std::string, ""); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(bool, false); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(unsigned char, '\0'); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(signed char, '\0'); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(char, '\0'); + +// There's no need for a default action for signed wchar_t, as that +// type is the same as wchar_t for gcc, and invalid for MSVC. +// +// There's also no need for a default action for unsigned wchar_t, as +// that type is the same as unsigned int for gcc, and invalid for +// MSVC. +#if GMOCK_WCHAR_T_IS_NATIVE_ +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(wchar_t, 0U); // NOLINT +#endif + +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(unsigned short, 0U); // NOLINT +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(signed short, 0); // NOLINT +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(unsigned int, 0U); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(signed int, 0); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(unsigned long, 0UL); // NOLINT +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(signed long, 0L); // NOLINT +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(UInt64, 0); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(Int64, 0); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(float, 0); +GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_(double, 0); + +#undef GMOCK_DEFINE_DEFAULT_ACTION_FOR_RETURN_TYPE_ + +} // namespace internal + +// When an unexpected function call is encountered, Google Mock will +// let it return a default value if the user has specified one for its +// return type, or if the return type has a built-in default value; +// otherwise Google Mock won't know what value to return and will have +// to abort the process. +// +// The DefaultValue class allows a user to specify the +// default value for a type T that is both copyable and publicly +// destructible (i.e. anything that can be used as a function return +// type). The usage is: +// +// // Sets the default value for type T to be foo. +// DefaultValue::Set(foo); +template +class DefaultValue { + public: + // Sets the default value for type T; requires T to be + // copy-constructable and have a public destructor. + static void Set(T x) { + delete producer_; + producer_ = new FixedValueProducer(x); + } + + // Provides a factory function to be called to generate the default value. + // This method can be used even if T is only move-constructible, but it is not + // limited to that case. + typedef T (*FactoryFunction)(); + static void SetFactory(FactoryFunction factory) { + delete producer_; + producer_ = new FactoryValueProducer(factory); + } + + // Unsets the default value for type T. + static void Clear() { + delete producer_; + producer_ = NULL; + } + + // Returns true iff the user has set the default value for type T. + static bool IsSet() { return producer_ != NULL; } + + // Returns true if T has a default return value set by the user or there + // exists a built-in default value. + static bool Exists() { + return IsSet() || internal::BuiltInDefaultValue::Exists(); + } + + // Returns the default value for type T if the user has set one; + // otherwise returns the built-in default value. Requires that Exists() + // is true, which ensures that the return value is well-defined. + static T Get() { + return producer_ == NULL ? + internal::BuiltInDefaultValue::Get() : producer_->Produce(); + } + + private: + class ValueProducer { + public: + virtual ~ValueProducer() {} + virtual T Produce() = 0; + }; + + class FixedValueProducer : public ValueProducer { + public: + explicit FixedValueProducer(T value) : value_(value) {} + virtual T Produce() { return value_; } + + private: + const T value_; + GTEST_DISALLOW_COPY_AND_ASSIGN_(FixedValueProducer); + }; + + class FactoryValueProducer : public ValueProducer { + public: + explicit FactoryValueProducer(FactoryFunction factory) + : factory_(factory) {} + virtual T Produce() { return factory_(); } + + private: + const FactoryFunction factory_; + GTEST_DISALLOW_COPY_AND_ASSIGN_(FactoryValueProducer); + }; + + static ValueProducer* producer_; +}; + +// This partial specialization allows a user to set default values for +// reference types. +template +class DefaultValue { + public: + // Sets the default value for type T&. + static void Set(T& x) { // NOLINT + address_ = &x; + } + + // Unsets the default value for type T&. + static void Clear() { + address_ = NULL; + } + + // Returns true iff the user has set the default value for type T&. + static bool IsSet() { return address_ != NULL; } + + // Returns true if T has a default return value set by the user or there + // exists a built-in default value. + static bool Exists() { + return IsSet() || internal::BuiltInDefaultValue::Exists(); + } + + // Returns the default value for type T& if the user has set one; + // otherwise returns the built-in default value if there is one; + // otherwise aborts the process. + static T& Get() { + return address_ == NULL ? + internal::BuiltInDefaultValue::Get() : *address_; + } + + private: + static T* address_; +}; + +// This specialization allows DefaultValue::Get() to +// compile. +template <> +class DefaultValue { + public: + static bool Exists() { return true; } + static void Get() {} +}; + +// Points to the user-set default value for type T. +template +typename DefaultValue::ValueProducer* DefaultValue::producer_ = NULL; + +// Points to the user-set default value for type T&. +template +T* DefaultValue::address_ = NULL; + +// Implement this interface to define an action for function type F. +template +class ActionInterface { + public: + typedef typename internal::Function::Result Result; + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + ActionInterface() {} + virtual ~ActionInterface() {} + + // Performs the action. This method is not const, as in general an + // action can have side effects and be stateful. For example, a + // get-the-next-element-from-the-collection action will need to + // remember the current element. + virtual Result Perform(const ArgumentTuple& args) = 0; + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(ActionInterface); +}; + +// An Action is a copyable and IMMUTABLE (except by assignment) +// object that represents an action to be taken when a mock function +// of type F is called. The implementation of Action is just a +// linked_ptr to const ActionInterface, so copying is fairly cheap. +// Don't inherit from Action! +// +// You can view an object implementing ActionInterface as a +// concrete action (including its current state), and an Action +// object as a handle to it. +template +class Action { + public: + typedef typename internal::Function::Result Result; + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + // Constructs a null Action. Needed for storing Action objects in + // STL containers. + Action() : impl_(NULL) {} + + // Constructs an Action from its implementation. A NULL impl is + // used to represent the "do-default" action. + explicit Action(ActionInterface* impl) : impl_(impl) {} + + // Copy constructor. + Action(const Action& action) : impl_(action.impl_) {} + + // This constructor allows us to turn an Action object into an + // Action, as long as F's arguments can be implicitly converted + // to Func's and Func's return type can be implicitly converted to + // F's. + template + explicit Action(const Action& action); + + // Returns true iff this is the DoDefault() action. + bool IsDoDefault() const { return impl_.get() == NULL; } + + // Performs the action. Note that this method is const even though + // the corresponding method in ActionInterface is not. The reason + // is that a const Action means that it cannot be re-bound to + // another concrete action, not that the concrete action it binds to + // cannot change state. (Think of the difference between a const + // pointer and a pointer to const.) + Result Perform(const ArgumentTuple& args) const { + internal::Assert( + !IsDoDefault(), __FILE__, __LINE__, + "You are using DoDefault() inside a composite action like " + "DoAll() or WithArgs(). This is not supported for technical " + "reasons. Please instead spell out the default action, or " + "assign the default action to an Action variable and use " + "the variable in various places."); + return impl_->Perform(args); + } + + private: + template + friend class internal::ActionAdaptor; + + internal::linked_ptr > impl_; +}; + +// The PolymorphicAction class template makes it easy to implement a +// polymorphic action (i.e. an action that can be used in mock +// functions of than one type, e.g. Return()). +// +// To define a polymorphic action, a user first provides a COPYABLE +// implementation class that has a Perform() method template: +// +// class FooAction { +// public: +// template +// Result Perform(const ArgumentTuple& args) const { +// // Processes the arguments and returns a result, using +// // tr1::get(args) to get the N-th (0-based) argument in the tuple. +// } +// ... +// }; +// +// Then the user creates the polymorphic action using +// MakePolymorphicAction(object) where object has type FooAction. See +// the definition of Return(void) and SetArgumentPointee(value) for +// complete examples. +template +class PolymorphicAction { + public: + explicit PolymorphicAction(const Impl& impl) : impl_(impl) {} + + template + operator Action() const { + return Action(new MonomorphicImpl(impl_)); + } + + private: + template + class MonomorphicImpl : public ActionInterface { + public: + typedef typename internal::Function::Result Result; + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + explicit MonomorphicImpl(const Impl& impl) : impl_(impl) {} + + virtual Result Perform(const ArgumentTuple& args) { + return impl_.template Perform(args); + } + + private: + Impl impl_; + + GTEST_DISALLOW_ASSIGN_(MonomorphicImpl); + }; + + Impl impl_; + + GTEST_DISALLOW_ASSIGN_(PolymorphicAction); +}; + +// Creates an Action from its implementation and returns it. The +// created Action object owns the implementation. +template +Action MakeAction(ActionInterface* impl) { + return Action(impl); +} + +// Creates a polymorphic action from its implementation. This is +// easier to use than the PolymorphicAction constructor as it +// doesn't require you to explicitly write the template argument, e.g. +// +// MakePolymorphicAction(foo); +// vs +// PolymorphicAction(foo); +template +inline PolymorphicAction MakePolymorphicAction(const Impl& impl) { + return PolymorphicAction(impl); +} + +namespace internal { + +// Allows an Action object to pose as an Action, as long as F2 +// and F1 are compatible. +template +class ActionAdaptor : public ActionInterface { + public: + typedef typename internal::Function::Result Result; + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + explicit ActionAdaptor(const Action& from) : impl_(from.impl_) {} + + virtual Result Perform(const ArgumentTuple& args) { + return impl_->Perform(args); + } + + private: + const internal::linked_ptr > impl_; + + GTEST_DISALLOW_ASSIGN_(ActionAdaptor); +}; + +// Helper struct to specialize ReturnAction to execute a move instead of a copy +// on return. Useful for move-only types, but could be used on any type. +template +struct ByMoveWrapper { + explicit ByMoveWrapper(T value) : payload(internal::move(value)) {} + T payload; +}; + +// Implements the polymorphic Return(x) action, which can be used in +// any function that returns the type of x, regardless of the argument +// types. +// +// Note: The value passed into Return must be converted into +// Function::Result when this action is cast to Action rather than +// when that action is performed. This is important in scenarios like +// +// MOCK_METHOD1(Method, T(U)); +// ... +// { +// Foo foo; +// X x(&foo); +// EXPECT_CALL(mock, Method(_)).WillOnce(Return(x)); +// } +// +// In the example above the variable x holds reference to foo which leaves +// scope and gets destroyed. If copying X just copies a reference to foo, +// that copy will be left with a hanging reference. If conversion to T +// makes a copy of foo, the above code is safe. To support that scenario, we +// need to make sure that the type conversion happens inside the EXPECT_CALL +// statement, and conversion of the result of Return to Action is a +// good place for that. +// +template +class ReturnAction { + public: + // Constructs a ReturnAction object from the value to be returned. + // 'value' is passed by value instead of by const reference in order + // to allow Return("string literal") to compile. + explicit ReturnAction(R value) : value_(new R(internal::move(value))) {} + + // This template type conversion operator allows Return(x) to be + // used in ANY function that returns x's type. + template + operator Action() const { + // Assert statement belongs here because this is the best place to verify + // conditions on F. It produces the clearest error messages + // in most compilers. + // Impl really belongs in this scope as a local class but can't + // because MSVC produces duplicate symbols in different translation units + // in this case. Until MS fixes that bug we put Impl into the class scope + // and put the typedef both here (for use in assert statement) and + // in the Impl class. But both definitions must be the same. + typedef typename Function::Result Result; + GTEST_COMPILE_ASSERT_( + !is_reference::value, + use_ReturnRef_instead_of_Return_to_return_a_reference); + return Action(new Impl(value_)); + } + + private: + // Implements the Return(x) action for a particular function type F. + template + class Impl : public ActionInterface { + public: + typedef typename Function::Result Result; + typedef typename Function::ArgumentTuple ArgumentTuple; + + // The implicit cast is necessary when Result has more than one + // single-argument constructor (e.g. Result is std::vector) and R + // has a type conversion operator template. In that case, value_(value) + // won't compile as the compiler doesn't known which constructor of + // Result to call. ImplicitCast_ forces the compiler to convert R to + // Result without considering explicit constructors, thus resolving the + // ambiguity. value_ is then initialized using its copy constructor. + explicit Impl(const linked_ptr& value) + : value_before_cast_(*value), + value_(ImplicitCast_(value_before_cast_)) {} + + virtual Result Perform(const ArgumentTuple&) { return value_; } + + private: + GTEST_COMPILE_ASSERT_(!is_reference::value, + Result_cannot_be_a_reference_type); + // We save the value before casting just in case it is being cast to a + // wrapper type. + R value_before_cast_; + Result value_; + + GTEST_DISALLOW_COPY_AND_ASSIGN_(Impl); + }; + + // Partially specialize for ByMoveWrapper. This version of ReturnAction will + // move its contents instead. + template + class Impl, F> : public ActionInterface { + public: + typedef typename Function::Result Result; + typedef typename Function::ArgumentTuple ArgumentTuple; + + explicit Impl(const linked_ptr& wrapper) + : performed_(false), wrapper_(wrapper) {} + + virtual Result Perform(const ArgumentTuple&) { + GTEST_CHECK_(!performed_) + << "A ByMove() action should only be performed once."; + performed_ = true; + return internal::move(wrapper_->payload); + } + + private: + bool performed_; + const linked_ptr wrapper_; + + GTEST_DISALLOW_ASSIGN_(Impl); + }; + + const linked_ptr value_; + + GTEST_DISALLOW_ASSIGN_(ReturnAction); +}; + +// Implements the ReturnNull() action. +class ReturnNullAction { + public: + // Allows ReturnNull() to be used in any pointer-returning function. In C++11 + // this is enforced by returning nullptr, and in non-C++11 by asserting a + // pointer type on compile time. + template + static Result Perform(const ArgumentTuple&) { +#if GTEST_LANG_CXX11 + return nullptr; +#else + GTEST_COMPILE_ASSERT_(internal::is_pointer::value, + ReturnNull_can_be_used_to_return_a_pointer_only); + return NULL; +#endif // GTEST_LANG_CXX11 + } +}; + +// Implements the Return() action. +class ReturnVoidAction { + public: + // Allows Return() to be used in any void-returning function. + template + static void Perform(const ArgumentTuple&) { + CompileAssertTypesEqual(); + } +}; + +// Implements the polymorphic ReturnRef(x) action, which can be used +// in any function that returns a reference to the type of x, +// regardless of the argument types. +template +class ReturnRefAction { + public: + // Constructs a ReturnRefAction object from the reference to be returned. + explicit ReturnRefAction(T& ref) : ref_(ref) {} // NOLINT + + // This template type conversion operator allows ReturnRef(x) to be + // used in ANY function that returns a reference to x's type. + template + operator Action() const { + typedef typename Function::Result Result; + // Asserts that the function return type is a reference. This + // catches the user error of using ReturnRef(x) when Return(x) + // should be used, and generates some helpful error message. + GTEST_COMPILE_ASSERT_(internal::is_reference::value, + use_Return_instead_of_ReturnRef_to_return_a_value); + return Action(new Impl(ref_)); + } + + private: + // Implements the ReturnRef(x) action for a particular function type F. + template + class Impl : public ActionInterface { + public: + typedef typename Function::Result Result; + typedef typename Function::ArgumentTuple ArgumentTuple; + + explicit Impl(T& ref) : ref_(ref) {} // NOLINT + + virtual Result Perform(const ArgumentTuple&) { + return ref_; + } + + private: + T& ref_; + + GTEST_DISALLOW_ASSIGN_(Impl); + }; + + T& ref_; + + GTEST_DISALLOW_ASSIGN_(ReturnRefAction); +}; + +// Implements the polymorphic ReturnRefOfCopy(x) action, which can be +// used in any function that returns a reference to the type of x, +// regardless of the argument types. +template +class ReturnRefOfCopyAction { + public: + // Constructs a ReturnRefOfCopyAction object from the reference to + // be returned. + explicit ReturnRefOfCopyAction(const T& value) : value_(value) {} // NOLINT + + // This template type conversion operator allows ReturnRefOfCopy(x) to be + // used in ANY function that returns a reference to x's type. + template + operator Action() const { + typedef typename Function::Result Result; + // Asserts that the function return type is a reference. This + // catches the user error of using ReturnRefOfCopy(x) when Return(x) + // should be used, and generates some helpful error message. + GTEST_COMPILE_ASSERT_( + internal::is_reference::value, + use_Return_instead_of_ReturnRefOfCopy_to_return_a_value); + return Action(new Impl(value_)); + } + + private: + // Implements the ReturnRefOfCopy(x) action for a particular function type F. + template + class Impl : public ActionInterface { + public: + typedef typename Function::Result Result; + typedef typename Function::ArgumentTuple ArgumentTuple; + + explicit Impl(const T& value) : value_(value) {} // NOLINT + + virtual Result Perform(const ArgumentTuple&) { + return value_; + } + + private: + T value_; + + GTEST_DISALLOW_ASSIGN_(Impl); + }; + + const T value_; + + GTEST_DISALLOW_ASSIGN_(ReturnRefOfCopyAction); +}; + +// Implements the polymorphic DoDefault() action. +class DoDefaultAction { + public: + // This template type conversion operator allows DoDefault() to be + // used in any function. + template + operator Action() const { return Action(NULL); } +}; + +// Implements the Assign action to set a given pointer referent to a +// particular value. +template +class AssignAction { + public: + AssignAction(T1* ptr, T2 value) : ptr_(ptr), value_(value) {} + + template + void Perform(const ArgumentTuple& /* args */) const { + *ptr_ = value_; + } + + private: + T1* const ptr_; + const T2 value_; + + GTEST_DISALLOW_ASSIGN_(AssignAction); +}; + +#if !GTEST_OS_WINDOWS_MOBILE + +// Implements the SetErrnoAndReturn action to simulate return from +// various system calls and libc functions. +template +class SetErrnoAndReturnAction { + public: + SetErrnoAndReturnAction(int errno_value, T result) + : errno_(errno_value), + result_(result) {} + template + Result Perform(const ArgumentTuple& /* args */) const { + errno = errno_; + return result_; + } + + private: + const int errno_; + const T result_; + + GTEST_DISALLOW_ASSIGN_(SetErrnoAndReturnAction); +}; + +#endif // !GTEST_OS_WINDOWS_MOBILE + +// Implements the SetArgumentPointee(x) action for any function +// whose N-th argument (0-based) is a pointer to x's type. The +// template parameter kIsProto is true iff type A is ProtocolMessage, +// proto2::Message, or a sub-class of those. +template +class SetArgumentPointeeAction { + public: + // Constructs an action that sets the variable pointed to by the + // N-th function argument to 'value'. + explicit SetArgumentPointeeAction(const A& value) : value_(value) {} + + template + void Perform(const ArgumentTuple& args) const { + CompileAssertTypesEqual(); + *::testing::get(args) = value_; + } + + private: + const A value_; + + GTEST_DISALLOW_ASSIGN_(SetArgumentPointeeAction); +}; + +template +class SetArgumentPointeeAction { + public: + // Constructs an action that sets the variable pointed to by the + // N-th function argument to 'proto'. Both ProtocolMessage and + // proto2::Message have the CopyFrom() method, so the same + // implementation works for both. + explicit SetArgumentPointeeAction(const Proto& proto) : proto_(new Proto) { + proto_->CopyFrom(proto); + } + + template + void Perform(const ArgumentTuple& args) const { + CompileAssertTypesEqual(); + ::testing::get(args)->CopyFrom(*proto_); + } + + private: + const internal::linked_ptr proto_; + + GTEST_DISALLOW_ASSIGN_(SetArgumentPointeeAction); +}; + +// Implements the InvokeWithoutArgs(f) action. The template argument +// FunctionImpl is the implementation type of f, which can be either a +// function pointer or a functor. InvokeWithoutArgs(f) can be used as an +// Action as long as f's type is compatible with F (i.e. f can be +// assigned to a tr1::function). +template +class InvokeWithoutArgsAction { + public: + // The c'tor makes a copy of function_impl (either a function + // pointer or a functor). + explicit InvokeWithoutArgsAction(FunctionImpl function_impl) + : function_impl_(function_impl) {} + + // Allows InvokeWithoutArgs(f) to be used as any action whose type is + // compatible with f. + template + Result Perform(const ArgumentTuple&) { return function_impl_(); } + + private: + FunctionImpl function_impl_; + + GTEST_DISALLOW_ASSIGN_(InvokeWithoutArgsAction); +}; + +// Implements the InvokeWithoutArgs(object_ptr, &Class::Method) action. +template +class InvokeMethodWithoutArgsAction { + public: + InvokeMethodWithoutArgsAction(Class* obj_ptr, MethodPtr method_ptr) + : obj_ptr_(obj_ptr), method_ptr_(method_ptr) {} + + template + Result Perform(const ArgumentTuple&) const { + return (obj_ptr_->*method_ptr_)(); + } + + private: + Class* const obj_ptr_; + const MethodPtr method_ptr_; + + GTEST_DISALLOW_ASSIGN_(InvokeMethodWithoutArgsAction); +}; + +// Implements the IgnoreResult(action) action. +template +class IgnoreResultAction { + public: + explicit IgnoreResultAction(const A& action) : action_(action) {} + + template + operator Action() const { + // Assert statement belongs here because this is the best place to verify + // conditions on F. It produces the clearest error messages + // in most compilers. + // Impl really belongs in this scope as a local class but can't + // because MSVC produces duplicate symbols in different translation units + // in this case. Until MS fixes that bug we put Impl into the class scope + // and put the typedef both here (for use in assert statement) and + // in the Impl class. But both definitions must be the same. + typedef typename internal::Function::Result Result; + + // Asserts at compile time that F returns void. + CompileAssertTypesEqual(); + + return Action(new Impl(action_)); + } + + private: + template + class Impl : public ActionInterface { + public: + typedef typename internal::Function::Result Result; + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + explicit Impl(const A& action) : action_(action) {} + + virtual void Perform(const ArgumentTuple& args) { + // Performs the action and ignores its result. + action_.Perform(args); + } + + private: + // Type OriginalFunction is the same as F except that its return + // type is IgnoredValue. + typedef typename internal::Function::MakeResultIgnoredValue + OriginalFunction; + + const Action action_; + + GTEST_DISALLOW_ASSIGN_(Impl); + }; + + const A action_; + + GTEST_DISALLOW_ASSIGN_(IgnoreResultAction); +}; + +// A ReferenceWrapper object represents a reference to type T, +// which can be either const or not. It can be explicitly converted +// from, and implicitly converted to, a T&. Unlike a reference, +// ReferenceWrapper can be copied and can survive template type +// inference. This is used to support by-reference arguments in the +// InvokeArgument(...) action. The idea was from "reference +// wrappers" in tr1, which we don't have in our source tree yet. +template +class ReferenceWrapper { + public: + // Constructs a ReferenceWrapper object from a T&. + explicit ReferenceWrapper(T& l_value) : pointer_(&l_value) {} // NOLINT + + // Allows a ReferenceWrapper object to be implicitly converted to + // a T&. + operator T&() const { return *pointer_; } + private: + T* pointer_; +}; + +// Allows the expression ByRef(x) to be printed as a reference to x. +template +void PrintTo(const ReferenceWrapper& ref, ::std::ostream* os) { + T& value = ref; + UniversalPrinter::Print(value, os); +} + +// Does two actions sequentially. Used for implementing the DoAll(a1, +// a2, ...) action. +template +class DoBothAction { + public: + DoBothAction(Action1 action1, Action2 action2) + : action1_(action1), action2_(action2) {} + + // This template type conversion operator allows DoAll(a1, ..., a_n) + // to be used in ANY function of compatible type. + template + operator Action() const { + return Action(new Impl(action1_, action2_)); + } + + private: + // Implements the DoAll(...) action for a particular function type F. + template + class Impl : public ActionInterface { + public: + typedef typename Function::Result Result; + typedef typename Function::ArgumentTuple ArgumentTuple; + typedef typename Function::MakeResultVoid VoidResult; + + Impl(const Action& action1, const Action& action2) + : action1_(action1), action2_(action2) {} + + virtual Result Perform(const ArgumentTuple& args) { + action1_.Perform(args); + return action2_.Perform(args); + } + + private: + const Action action1_; + const Action action2_; + + GTEST_DISALLOW_ASSIGN_(Impl); + }; + + Action1 action1_; + Action2 action2_; + + GTEST_DISALLOW_ASSIGN_(DoBothAction); +}; + +} // namespace internal + +// An Unused object can be implicitly constructed from ANY value. +// This is handy when defining actions that ignore some or all of the +// mock function arguments. For example, given +// +// MOCK_METHOD3(Foo, double(const string& label, double x, double y)); +// MOCK_METHOD3(Bar, double(int index, double x, double y)); +// +// instead of +// +// double DistanceToOriginWithLabel(const string& label, double x, double y) { +// return sqrt(x*x + y*y); +// } +// double DistanceToOriginWithIndex(int index, double x, double y) { +// return sqrt(x*x + y*y); +// } +// ... +// EXEPCT_CALL(mock, Foo("abc", _, _)) +// .WillOnce(Invoke(DistanceToOriginWithLabel)); +// EXEPCT_CALL(mock, Bar(5, _, _)) +// .WillOnce(Invoke(DistanceToOriginWithIndex)); +// +// you could write +// +// // We can declare any uninteresting argument as Unused. +// double DistanceToOrigin(Unused, double x, double y) { +// return sqrt(x*x + y*y); +// } +// ... +// EXEPCT_CALL(mock, Foo("abc", _, _)).WillOnce(Invoke(DistanceToOrigin)); +// EXEPCT_CALL(mock, Bar(5, _, _)).WillOnce(Invoke(DistanceToOrigin)); +typedef internal::IgnoredValue Unused; + +// This constructor allows us to turn an Action object into an +// Action, as long as To's arguments can be implicitly converted +// to From's and From's return type cann be implicitly converted to +// To's. +template +template +Action::Action(const Action& from) + : impl_(new internal::ActionAdaptor(from)) {} + +// Creates an action that returns 'value'. 'value' is passed by value +// instead of const reference - otherwise Return("string literal") +// will trigger a compiler error about using array as initializer. +template +internal::ReturnAction Return(R value) { + return internal::ReturnAction(internal::move(value)); +} + +// Creates an action that returns NULL. +inline PolymorphicAction ReturnNull() { + return MakePolymorphicAction(internal::ReturnNullAction()); +} + +// Creates an action that returns from a void function. +inline PolymorphicAction Return() { + return MakePolymorphicAction(internal::ReturnVoidAction()); +} + +// Creates an action that returns the reference to a variable. +template +inline internal::ReturnRefAction ReturnRef(R& x) { // NOLINT + return internal::ReturnRefAction(x); +} + +// Creates an action that returns the reference to a copy of the +// argument. The copy is created when the action is constructed and +// lives as long as the action. +template +inline internal::ReturnRefOfCopyAction ReturnRefOfCopy(const R& x) { + return internal::ReturnRefOfCopyAction(x); +} + +// Modifies the parent action (a Return() action) to perform a move of the +// argument instead of a copy. +// Return(ByMove()) actions can only be executed once and will assert this +// invariant. +template +internal::ByMoveWrapper ByMove(R x) { + return internal::ByMoveWrapper(internal::move(x)); +} + +// Creates an action that does the default action for the give mock function. +inline internal::DoDefaultAction DoDefault() { + return internal::DoDefaultAction(); +} + +// Creates an action that sets the variable pointed by the N-th +// (0-based) function argument to 'value'. +template +PolymorphicAction< + internal::SetArgumentPointeeAction< + N, T, internal::IsAProtocolMessage::value> > +SetArgPointee(const T& x) { + return MakePolymorphicAction(internal::SetArgumentPointeeAction< + N, T, internal::IsAProtocolMessage::value>(x)); +} + +#if !((GTEST_GCC_VER_ && GTEST_GCC_VER_ < 40000) || GTEST_OS_SYMBIAN) +// This overload allows SetArgPointee() to accept a string literal. +// GCC prior to the version 4.0 and Symbian C++ compiler cannot distinguish +// this overload from the templated version and emit a compile error. +template +PolymorphicAction< + internal::SetArgumentPointeeAction > +SetArgPointee(const char* p) { + return MakePolymorphicAction(internal::SetArgumentPointeeAction< + N, const char*, false>(p)); +} + +template +PolymorphicAction< + internal::SetArgumentPointeeAction > +SetArgPointee(const wchar_t* p) { + return MakePolymorphicAction(internal::SetArgumentPointeeAction< + N, const wchar_t*, false>(p)); +} +#endif + +// The following version is DEPRECATED. +template +PolymorphicAction< + internal::SetArgumentPointeeAction< + N, T, internal::IsAProtocolMessage::value> > +SetArgumentPointee(const T& x) { + return MakePolymorphicAction(internal::SetArgumentPointeeAction< + N, T, internal::IsAProtocolMessage::value>(x)); +} + +// Creates an action that sets a pointer referent to a given value. +template +PolymorphicAction > Assign(T1* ptr, T2 val) { + return MakePolymorphicAction(internal::AssignAction(ptr, val)); +} + +#if !GTEST_OS_WINDOWS_MOBILE + +// Creates an action that sets errno and returns the appropriate error. +template +PolymorphicAction > +SetErrnoAndReturn(int errval, T result) { + return MakePolymorphicAction( + internal::SetErrnoAndReturnAction(errval, result)); +} + +#endif // !GTEST_OS_WINDOWS_MOBILE + +// Various overloads for InvokeWithoutArgs(). + +// Creates an action that invokes 'function_impl' with no argument. +template +PolymorphicAction > +InvokeWithoutArgs(FunctionImpl function_impl) { + return MakePolymorphicAction( + internal::InvokeWithoutArgsAction(function_impl)); +} + +// Creates an action that invokes the given method on the given object +// with no argument. +template +PolymorphicAction > +InvokeWithoutArgs(Class* obj_ptr, MethodPtr method_ptr) { + return MakePolymorphicAction( + internal::InvokeMethodWithoutArgsAction( + obj_ptr, method_ptr)); +} + +// Creates an action that performs an_action and throws away its +// result. In other words, it changes the return type of an_action to +// void. an_action MUST NOT return void, or the code won't compile. +template +inline internal::IgnoreResultAction IgnoreResult(const A& an_action) { + return internal::IgnoreResultAction(an_action); +} + +// Creates a reference wrapper for the given L-value. If necessary, +// you can explicitly specify the type of the reference. For example, +// suppose 'derived' is an object of type Derived, ByRef(derived) +// would wrap a Derived&. If you want to wrap a const Base& instead, +// where Base is a base class of Derived, just write: +// +// ByRef(derived) +template +inline internal::ReferenceWrapper ByRef(T& l_value) { // NOLINT + return internal::ReferenceWrapper(l_value); +} + +} // namespace testing + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_ACTIONS_H_ diff --git a/googlemock/include/gmock/gmock-cardinalities.h b/googlemock/include/gmock/gmock-cardinalities.h new file mode 100644 index 0000000..fc315f9 --- /dev/null +++ b/googlemock/include/gmock/gmock-cardinalities.h @@ -0,0 +1,147 @@ +// Copyright 2007, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements some commonly used cardinalities. More +// cardinalities can be defined by the user implementing the +// CardinalityInterface interface if necessary. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_CARDINALITIES_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_CARDINALITIES_H_ + +#include +#include // NOLINT +#include "gmock/internal/gmock-port.h" +#include "gtest/gtest.h" + +namespace testing { + +// To implement a cardinality Foo, define: +// 1. a class FooCardinality that implements the +// CardinalityInterface interface, and +// 2. a factory function that creates a Cardinality object from a +// const FooCardinality*. +// +// The two-level delegation design follows that of Matcher, providing +// consistency for extension developers. It also eases ownership +// management as Cardinality objects can now be copied like plain values. + +// The implementation of a cardinality. +class CardinalityInterface { + public: + virtual ~CardinalityInterface() {} + + // Conservative estimate on the lower/upper bound of the number of + // calls allowed. + virtual int ConservativeLowerBound() const { return 0; } + virtual int ConservativeUpperBound() const { return INT_MAX; } + + // Returns true iff call_count calls will satisfy this cardinality. + virtual bool IsSatisfiedByCallCount(int call_count) const = 0; + + // Returns true iff call_count calls will saturate this cardinality. + virtual bool IsSaturatedByCallCount(int call_count) const = 0; + + // Describes self to an ostream. + virtual void DescribeTo(::std::ostream* os) const = 0; +}; + +// A Cardinality is a copyable and IMMUTABLE (except by assignment) +// object that specifies how many times a mock function is expected to +// be called. The implementation of Cardinality is just a linked_ptr +// to const CardinalityInterface, so copying is fairly cheap. +// Don't inherit from Cardinality! +class GTEST_API_ Cardinality { + public: + // Constructs a null cardinality. Needed for storing Cardinality + // objects in STL containers. + Cardinality() {} + + // Constructs a Cardinality from its implementation. + explicit Cardinality(const CardinalityInterface* impl) : impl_(impl) {} + + // Conservative estimate on the lower/upper bound of the number of + // calls allowed. + int ConservativeLowerBound() const { return impl_->ConservativeLowerBound(); } + int ConservativeUpperBound() const { return impl_->ConservativeUpperBound(); } + + // Returns true iff call_count calls will satisfy this cardinality. + bool IsSatisfiedByCallCount(int call_count) const { + return impl_->IsSatisfiedByCallCount(call_count); + } + + // Returns true iff call_count calls will saturate this cardinality. + bool IsSaturatedByCallCount(int call_count) const { + return impl_->IsSaturatedByCallCount(call_count); + } + + // Returns true iff call_count calls will over-saturate this + // cardinality, i.e. exceed the maximum number of allowed calls. + bool IsOverSaturatedByCallCount(int call_count) const { + return impl_->IsSaturatedByCallCount(call_count) && + !impl_->IsSatisfiedByCallCount(call_count); + } + + // Describes self to an ostream + void DescribeTo(::std::ostream* os) const { impl_->DescribeTo(os); } + + // Describes the given actual call count to an ostream. + static void DescribeActualCallCountTo(int actual_call_count, + ::std::ostream* os); + + private: + internal::linked_ptr impl_; +}; + +// Creates a cardinality that allows at least n calls. +GTEST_API_ Cardinality AtLeast(int n); + +// Creates a cardinality that allows at most n calls. +GTEST_API_ Cardinality AtMost(int n); + +// Creates a cardinality that allows any number of calls. +GTEST_API_ Cardinality AnyNumber(); + +// Creates a cardinality that allows between min and max calls. +GTEST_API_ Cardinality Between(int min, int max); + +// Creates a cardinality that allows exactly n calls. +GTEST_API_ Cardinality Exactly(int n); + +// Creates a cardinality from its implementation. +inline Cardinality MakeCardinality(const CardinalityInterface* c) { + return Cardinality(c); +} + +} // namespace testing + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_CARDINALITIES_H_ diff --git a/googlemock/include/gmock/gmock-generated-actions.h b/googlemock/include/gmock/gmock-generated-actions.h new file mode 100644 index 0000000..b5a889c --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-actions.h @@ -0,0 +1,2377 @@ +// This file was GENERATED by a script. DO NOT EDIT BY HAND!!! + +// Copyright 2007, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements some commonly used variadic actions. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_ + +#include "gmock/gmock-actions.h" +#include "gmock/internal/gmock-port.h" + +namespace testing { +namespace internal { + +// InvokeHelper knows how to unpack an N-tuple and invoke an N-ary +// function or method with the unpacked values, where F is a function +// type that takes N arguments. +template +class InvokeHelper; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple<>&) { + return function(); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple<>&) { + return (obj_ptr->*method_ptr)(); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args), + get<3>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args), get<3>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args), + get<3>(args), get<4>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args), get<3>(args), get<4>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args), + get<3>(args), get<4>(args), get<5>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args), get<3>(args), get<4>(args), get<5>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args), + get<3>(args), get<4>(args), get<5>(args), get<6>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args), get<3>(args), get<4>(args), get<5>(args), + get<6>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args), + get<3>(args), get<4>(args), get<5>(args), get<6>(args), + get<7>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args), get<3>(args), get<4>(args), get<5>(args), + get<6>(args), get<7>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args), + get<3>(args), get<4>(args), get<5>(args), get<6>(args), + get<7>(args), get<8>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args), get<3>(args), get<4>(args), get<5>(args), + get<6>(args), get<7>(args), get<8>(args)); + } +}; + +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple& args) { + return function(get<0>(args), get<1>(args), get<2>(args), + get<3>(args), get<4>(args), get<5>(args), get<6>(args), + get<7>(args), get<8>(args), get<9>(args)); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple& args) { + return (obj_ptr->*method_ptr)(get<0>(args), get<1>(args), + get<2>(args), get<3>(args), get<4>(args), get<5>(args), + get<6>(args), get<7>(args), get<8>(args), get<9>(args)); + } +}; + +// An INTERNAL macro for extracting the type of a tuple field. It's +// subject to change without notice - DO NOT USE IN USER CODE! +#define GMOCK_FIELD_(Tuple, N) \ + typename ::testing::tuple_element::type + +// SelectArgs::type is the +// type of an n-ary function whose i-th (1-based) argument type is the +// k{i}-th (0-based) field of ArgumentTuple, which must be a tuple +// type, and whose return type is Result. For example, +// SelectArgs, 0, 3>::type +// is int(bool, long). +// +// SelectArgs::Select(args) +// returns the selected fields (k1, k2, ..., k_n) of args as a tuple. +// For example, +// SelectArgs, 2, 0>::Select( +// ::testing::make_tuple(true, 'a', 2.5)) +// returns tuple (2.5, true). +// +// The numbers in list k1, k2, ..., k_n must be >= 0, where n can be +// in the range [0, 10]. Duplicates are allowed and they don't have +// to be in an ascending or descending order. + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3), + GMOCK_FIELD_(ArgumentTuple, k4), GMOCK_FIELD_(ArgumentTuple, k5), + GMOCK_FIELD_(ArgumentTuple, k6), GMOCK_FIELD_(ArgumentTuple, k7), + GMOCK_FIELD_(ArgumentTuple, k8), GMOCK_FIELD_(ArgumentTuple, k9), + GMOCK_FIELD_(ArgumentTuple, k10)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args), + get(args), get(args), get(args), get(args), + get(args), get(args), get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& /* args */) { + return SelectedArgs(); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3), + GMOCK_FIELD_(ArgumentTuple, k4)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args), + get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3), + GMOCK_FIELD_(ArgumentTuple, k4), GMOCK_FIELD_(ArgumentTuple, k5)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args), + get(args), get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3), + GMOCK_FIELD_(ArgumentTuple, k4), GMOCK_FIELD_(ArgumentTuple, k5), + GMOCK_FIELD_(ArgumentTuple, k6)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args), + get(args), get(args), get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3), + GMOCK_FIELD_(ArgumentTuple, k4), GMOCK_FIELD_(ArgumentTuple, k5), + GMOCK_FIELD_(ArgumentTuple, k6), GMOCK_FIELD_(ArgumentTuple, k7)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args), + get(args), get(args), get(args), get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3), + GMOCK_FIELD_(ArgumentTuple, k4), GMOCK_FIELD_(ArgumentTuple, k5), + GMOCK_FIELD_(ArgumentTuple, k6), GMOCK_FIELD_(ArgumentTuple, k7), + GMOCK_FIELD_(ArgumentTuple, k8)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args), + get(args), get(args), get(args), get(args), + get(args)); + } +}; + +template +class SelectArgs { + public: + typedef Result type(GMOCK_FIELD_(ArgumentTuple, k1), + GMOCK_FIELD_(ArgumentTuple, k2), GMOCK_FIELD_(ArgumentTuple, k3), + GMOCK_FIELD_(ArgumentTuple, k4), GMOCK_FIELD_(ArgumentTuple, k5), + GMOCK_FIELD_(ArgumentTuple, k6), GMOCK_FIELD_(ArgumentTuple, k7), + GMOCK_FIELD_(ArgumentTuple, k8), GMOCK_FIELD_(ArgumentTuple, k9)); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs(get(args), get(args), get(args), + get(args), get(args), get(args), get(args), + get(args), get(args)); + } +}; + +#undef GMOCK_FIELD_ + +// Implements the WithArgs action. +template +class WithArgsAction { + public: + explicit WithArgsAction(const InnerAction& action) : action_(action) {} + + template + operator Action() const { return MakeAction(new Impl(action_)); } + + private: + template + class Impl : public ActionInterface { + public: + typedef typename Function::Result Result; + typedef typename Function::ArgumentTuple ArgumentTuple; + + explicit Impl(const InnerAction& action) : action_(action) {} + + virtual Result Perform(const ArgumentTuple& args) { + return action_.Perform(SelectArgs::Select(args)); + } + + private: + typedef typename SelectArgs::type InnerFunctionType; + + Action action_; + }; + + const InnerAction action_; + + GTEST_DISALLOW_ASSIGN_(WithArgsAction); +}; + +// A macro from the ACTION* family (defined later in this file) +// defines an action that can be used in a mock function. Typically, +// these actions only care about a subset of the arguments of the mock +// function. For example, if such an action only uses the second +// argument, it can be used in any mock function that takes >= 2 +// arguments where the type of the second argument is compatible. +// +// Therefore, the action implementation must be prepared to take more +// arguments than it needs. The ExcessiveArg type is used to +// represent those excessive arguments. In order to keep the compiler +// error messages tractable, we define it in the testing namespace +// instead of testing::internal. However, this is an INTERNAL TYPE +// and subject to change without notice, so a user MUST NOT USE THIS +// TYPE DIRECTLY. +struct ExcessiveArg {}; + +// A helper class needed for implementing the ACTION* macros. +template +class ActionHelper { + public: + static Result Perform(Impl* impl, const ::testing::tuple<>& args) { + return impl->template gmock_PerformImpl<>(args, ExcessiveArg(), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, get<0>(args), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, get<0>(args), + get<1>(args), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, get<0>(args), + get<1>(args), get<2>(args), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, get<0>(args), + get<1>(args), get<2>(args), get<3>(args), ExcessiveArg(), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, + get<0>(args), get<1>(args), get<2>(args), get<3>(args), get<4>(args), + ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, + get<0>(args), get<1>(args), get<2>(args), get<3>(args), get<4>(args), + get<5>(args), ExcessiveArg(), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, + get<0>(args), get<1>(args), get<2>(args), get<3>(args), get<4>(args), + get<5>(args), get<6>(args), ExcessiveArg(), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, get<0>(args), get<1>(args), get<2>(args), get<3>(args), + get<4>(args), get<5>(args), get<6>(args), get<7>(args), ExcessiveArg(), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, get<0>(args), get<1>(args), get<2>(args), get<3>(args), + get<4>(args), get<5>(args), get<6>(args), get<7>(args), get<8>(args), + ExcessiveArg()); + } + + template + static Result Perform(Impl* impl, const ::testing::tuple& args) { + return impl->template gmock_PerformImpl(args, get<0>(args), get<1>(args), get<2>(args), get<3>(args), + get<4>(args), get<5>(args), get<6>(args), get<7>(args), get<8>(args), + get<9>(args)); + } +}; + +} // namespace internal + +// Various overloads for Invoke(). + +// WithArgs(an_action) creates an action that passes +// the selected arguments of the mock function to an_action and +// performs it. It serves as an adaptor between actions with +// different argument lists. C++ doesn't support default arguments for +// function templates, so we have to overload it. +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +template +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + +// Creates an action that does actions a1, a2, ..., sequentially in +// each invocation. +template +inline internal::DoBothAction +DoAll(Action1 a1, Action2 a2) { + return internal::DoBothAction(a1, a2); +} + +template +inline internal::DoBothAction > +DoAll(Action1 a1, Action2 a2, Action3 a3) { + return DoAll(a1, DoAll(a2, a3)); +} + +template +inline internal::DoBothAction > > +DoAll(Action1 a1, Action2 a2, Action3 a3, Action4 a4) { + return DoAll(a1, DoAll(a2, a3, a4)); +} + +template +inline internal::DoBothAction > > > +DoAll(Action1 a1, Action2 a2, Action3 a3, Action4 a4, Action5 a5) { + return DoAll(a1, DoAll(a2, a3, a4, a5)); +} + +template +inline internal::DoBothAction > > > > +DoAll(Action1 a1, Action2 a2, Action3 a3, Action4 a4, Action5 a5, Action6 a6) { + return DoAll(a1, DoAll(a2, a3, a4, a5, a6)); +} + +template +inline internal::DoBothAction > > > > > +DoAll(Action1 a1, Action2 a2, Action3 a3, Action4 a4, Action5 a5, Action6 a6, + Action7 a7) { + return DoAll(a1, DoAll(a2, a3, a4, a5, a6, a7)); +} + +template +inline internal::DoBothAction > > > > > > +DoAll(Action1 a1, Action2 a2, Action3 a3, Action4 a4, Action5 a5, Action6 a6, + Action7 a7, Action8 a8) { + return DoAll(a1, DoAll(a2, a3, a4, a5, a6, a7, a8)); +} + +template +inline internal::DoBothAction > > > > > > > +DoAll(Action1 a1, Action2 a2, Action3 a3, Action4 a4, Action5 a5, Action6 a6, + Action7 a7, Action8 a8, Action9 a9) { + return DoAll(a1, DoAll(a2, a3, a4, a5, a6, a7, a8, a9)); +} + +template +inline internal::DoBothAction > > > > > > > > +DoAll(Action1 a1, Action2 a2, Action3 a3, Action4 a4, Action5 a5, Action6 a6, + Action7 a7, Action8 a8, Action9 a9, Action10 a10) { + return DoAll(a1, DoAll(a2, a3, a4, a5, a6, a7, a8, a9, a10)); +} + +} // namespace testing + +// The ACTION* family of macros can be used in a namespace scope to +// define custom actions easily. The syntax: +// +// ACTION(name) { statements; } +// +// will define an action with the given name that executes the +// statements. The value returned by the statements will be used as +// the return value of the action. Inside the statements, you can +// refer to the K-th (0-based) argument of the mock function by +// 'argK', and refer to its type by 'argK_type'. For example: +// +// ACTION(IncrementArg1) { +// arg1_type temp = arg1; +// return ++(*temp); +// } +// +// allows you to write +// +// ...WillOnce(IncrementArg1()); +// +// You can also refer to the entire argument tuple and its type by +// 'args' and 'args_type', and refer to the mock function type and its +// return type by 'function_type' and 'return_type'. +// +// Note that you don't need to specify the types of the mock function +// arguments. However rest assured that your code is still type-safe: +// you'll get a compiler error if *arg1 doesn't support the ++ +// operator, or if the type of ++(*arg1) isn't compatible with the +// mock function's return type, for example. +// +// Sometimes you'll want to parameterize the action. For that you can use +// another macro: +// +// ACTION_P(name, param_name) { statements; } +// +// For example: +// +// ACTION_P(Add, n) { return arg0 + n; } +// +// will allow you to write: +// +// ...WillOnce(Add(5)); +// +// Note that you don't need to provide the type of the parameter +// either. If you need to reference the type of a parameter named +// 'foo', you can write 'foo_type'. For example, in the body of +// ACTION_P(Add, n) above, you can write 'n_type' to refer to the type +// of 'n'. +// +// We also provide ACTION_P2, ACTION_P3, ..., up to ACTION_P10 to support +// multi-parameter actions. +// +// For the purpose of typing, you can view +// +// ACTION_Pk(Foo, p1, ..., pk) { ... } +// +// as shorthand for +// +// template +// FooActionPk Foo(p1_type p1, ..., pk_type pk) { ... } +// +// In particular, you can provide the template type arguments +// explicitly when invoking Foo(), as in Foo(5, false); +// although usually you can rely on the compiler to infer the types +// for you automatically. You can assign the result of expression +// Foo(p1, ..., pk) to a variable of type FooActionPk. This can be useful when composing actions. +// +// You can also overload actions with different numbers of parameters: +// +// ACTION_P(Plus, a) { ... } +// ACTION_P2(Plus, a, b) { ... } +// +// While it's tempting to always use the ACTION* macros when defining +// a new action, you should also consider implementing ActionInterface +// or using MakePolymorphicAction() instead, especially if you need to +// use the action a lot. While these approaches require more work, +// they give you more control on the types of the mock function +// arguments and the action parameters, which in general leads to +// better compiler error messages that pay off in the long run. They +// also allow overloading actions based on parameter types (as opposed +// to just based on the number of parameters). +// +// CAVEAT: +// +// ACTION*() can only be used in a namespace scope. The reason is +// that C++ doesn't yet allow function-local types to be used to +// instantiate templates. The up-coming C++0x standard will fix this. +// Once that's done, we'll consider supporting using ACTION*() inside +// a function. +// +// MORE INFORMATION: +// +// To learn more about using these macros, please search for 'ACTION' +// on http://code.google.com/p/googlemock/wiki/CookBook. + +// An internal macro needed for implementing ACTION*(). +#define GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_\ + const args_type& args GTEST_ATTRIBUTE_UNUSED_, \ + arg0_type arg0 GTEST_ATTRIBUTE_UNUSED_, \ + arg1_type arg1 GTEST_ATTRIBUTE_UNUSED_, \ + arg2_type arg2 GTEST_ATTRIBUTE_UNUSED_, \ + arg3_type arg3 GTEST_ATTRIBUTE_UNUSED_, \ + arg4_type arg4 GTEST_ATTRIBUTE_UNUSED_, \ + arg5_type arg5 GTEST_ATTRIBUTE_UNUSED_, \ + arg6_type arg6 GTEST_ATTRIBUTE_UNUSED_, \ + arg7_type arg7 GTEST_ATTRIBUTE_UNUSED_, \ + arg8_type arg8 GTEST_ATTRIBUTE_UNUSED_, \ + arg9_type arg9 GTEST_ATTRIBUTE_UNUSED_ + +// Sometimes you want to give an action explicit template parameters +// that cannot be inferred from its value parameters. ACTION() and +// ACTION_P*() don't support that. ACTION_TEMPLATE() remedies that +// and can be viewed as an extension to ACTION() and ACTION_P*(). +// +// The syntax: +// +// ACTION_TEMPLATE(ActionName, +// HAS_m_TEMPLATE_PARAMS(kind1, name1, ..., kind_m, name_m), +// AND_n_VALUE_PARAMS(p1, ..., p_n)) { statements; } +// +// defines an action template that takes m explicit template +// parameters and n value parameters. name_i is the name of the i-th +// template parameter, and kind_i specifies whether it's a typename, +// an integral constant, or a template. p_i is the name of the i-th +// value parameter. +// +// Example: +// +// // DuplicateArg(output) converts the k-th argument of the mock +// // function to type T and copies it to *output. +// ACTION_TEMPLATE(DuplicateArg, +// HAS_2_TEMPLATE_PARAMS(int, k, typename, T), +// AND_1_VALUE_PARAMS(output)) { +// *output = T(::testing::get(args)); +// } +// ... +// int n; +// EXPECT_CALL(mock, Foo(_, _)) +// .WillOnce(DuplicateArg<1, unsigned char>(&n)); +// +// To create an instance of an action template, write: +// +// ActionName(v1, ..., v_n) +// +// where the ts are the template arguments and the vs are the value +// arguments. The value argument types are inferred by the compiler. +// If you want to explicitly specify the value argument types, you can +// provide additional template arguments: +// +// ActionName(v1, ..., v_n) +// +// where u_i is the desired type of v_i. +// +// ACTION_TEMPLATE and ACTION/ACTION_P* can be overloaded on the +// number of value parameters, but not on the number of template +// parameters. Without the restriction, the meaning of the following +// is unclear: +// +// OverloadedAction(x); +// +// Are we using a single-template-parameter action where 'bool' refers +// to the type of x, or are we using a two-template-parameter action +// where the compiler is asked to infer the type of x? +// +// Implementation notes: +// +// GMOCK_INTERNAL_*_HAS_m_TEMPLATE_PARAMS and +// GMOCK_INTERNAL_*_AND_n_VALUE_PARAMS are internal macros for +// implementing ACTION_TEMPLATE. The main trick we use is to create +// new macro invocations when expanding a macro. For example, we have +// +// #define ACTION_TEMPLATE(name, template_params, value_params) +// ... GMOCK_INTERNAL_DECL_##template_params ... +// +// which causes ACTION_TEMPLATE(..., HAS_1_TEMPLATE_PARAMS(typename, T), ...) +// to expand to +// +// ... GMOCK_INTERNAL_DECL_HAS_1_TEMPLATE_PARAMS(typename, T) ... +// +// Since GMOCK_INTERNAL_DECL_HAS_1_TEMPLATE_PARAMS is a macro, the +// preprocessor will continue to expand it to +// +// ... typename T ... +// +// This technique conforms to the C++ standard and is portable. It +// allows us to implement action templates using O(N) code, where N is +// the maximum number of template/value parameters supported. Without +// using it, we'd have to devote O(N^2) amount of code to implement all +// combinations of m and n. + +// Declares the template parameters. +#define GMOCK_INTERNAL_DECL_HAS_1_TEMPLATE_PARAMS(kind0, name0) kind0 name0 +#define GMOCK_INTERNAL_DECL_HAS_2_TEMPLATE_PARAMS(kind0, name0, kind1, \ + name1) kind0 name0, kind1 name1 +#define GMOCK_INTERNAL_DECL_HAS_3_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2) kind0 name0, kind1 name1, kind2 name2 +#define GMOCK_INTERNAL_DECL_HAS_4_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3) kind0 name0, kind1 name1, kind2 name2, \ + kind3 name3 +#define GMOCK_INTERNAL_DECL_HAS_5_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4) kind0 name0, kind1 name1, \ + kind2 name2, kind3 name3, kind4 name4 +#define GMOCK_INTERNAL_DECL_HAS_6_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5) kind0 name0, \ + kind1 name1, kind2 name2, kind3 name3, kind4 name4, kind5 name5 +#define GMOCK_INTERNAL_DECL_HAS_7_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, \ + name6) kind0 name0, kind1 name1, kind2 name2, kind3 name3, kind4 name4, \ + kind5 name5, kind6 name6 +#define GMOCK_INTERNAL_DECL_HAS_8_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, name6, \ + kind7, name7) kind0 name0, kind1 name1, kind2 name2, kind3 name3, \ + kind4 name4, kind5 name5, kind6 name6, kind7 name7 +#define GMOCK_INTERNAL_DECL_HAS_9_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, name6, \ + kind7, name7, kind8, name8) kind0 name0, kind1 name1, kind2 name2, \ + kind3 name3, kind4 name4, kind5 name5, kind6 name6, kind7 name7, \ + kind8 name8 +#define GMOCK_INTERNAL_DECL_HAS_10_TEMPLATE_PARAMS(kind0, name0, kind1, \ + name1, kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, \ + name6, kind7, name7, kind8, name8, kind9, name9) kind0 name0, \ + kind1 name1, kind2 name2, kind3 name3, kind4 name4, kind5 name5, \ + kind6 name6, kind7 name7, kind8 name8, kind9 name9 + +// Lists the template parameters. +#define GMOCK_INTERNAL_LIST_HAS_1_TEMPLATE_PARAMS(kind0, name0) name0 +#define GMOCK_INTERNAL_LIST_HAS_2_TEMPLATE_PARAMS(kind0, name0, kind1, \ + name1) name0, name1 +#define GMOCK_INTERNAL_LIST_HAS_3_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2) name0, name1, name2 +#define GMOCK_INTERNAL_LIST_HAS_4_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3) name0, name1, name2, name3 +#define GMOCK_INTERNAL_LIST_HAS_5_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4) name0, name1, name2, name3, \ + name4 +#define GMOCK_INTERNAL_LIST_HAS_6_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5) name0, name1, \ + name2, name3, name4, name5 +#define GMOCK_INTERNAL_LIST_HAS_7_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, \ + name6) name0, name1, name2, name3, name4, name5, name6 +#define GMOCK_INTERNAL_LIST_HAS_8_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, name6, \ + kind7, name7) name0, name1, name2, name3, name4, name5, name6, name7 +#define GMOCK_INTERNAL_LIST_HAS_9_TEMPLATE_PARAMS(kind0, name0, kind1, name1, \ + kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, name6, \ + kind7, name7, kind8, name8) name0, name1, name2, name3, name4, name5, \ + name6, name7, name8 +#define GMOCK_INTERNAL_LIST_HAS_10_TEMPLATE_PARAMS(kind0, name0, kind1, \ + name1, kind2, name2, kind3, name3, kind4, name4, kind5, name5, kind6, \ + name6, kind7, name7, kind8, name8, kind9, name9) name0, name1, name2, \ + name3, name4, name5, name6, name7, name8, name9 + +// Declares the types of value parameters. +#define GMOCK_INTERNAL_DECL_TYPE_AND_0_VALUE_PARAMS() +#define GMOCK_INTERNAL_DECL_TYPE_AND_1_VALUE_PARAMS(p0) , typename p0##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_2_VALUE_PARAMS(p0, p1) , \ + typename p0##_type, typename p1##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_3_VALUE_PARAMS(p0, p1, p2) , \ + typename p0##_type, typename p1##_type, typename p2##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_4_VALUE_PARAMS(p0, p1, p2, p3) , \ + typename p0##_type, typename p1##_type, typename p2##_type, \ + typename p3##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_5_VALUE_PARAMS(p0, p1, p2, p3, p4) , \ + typename p0##_type, typename p1##_type, typename p2##_type, \ + typename p3##_type, typename p4##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, p5) , \ + typename p0##_type, typename p1##_type, typename p2##_type, \ + typename p3##_type, typename p4##_type, typename p5##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6) , typename p0##_type, typename p1##_type, typename p2##_type, \ + typename p3##_type, typename p4##_type, typename p5##_type, \ + typename p6##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6, p7) , typename p0##_type, typename p1##_type, typename p2##_type, \ + typename p3##_type, typename p4##_type, typename p5##_type, \ + typename p6##_type, typename p7##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6, p7, p8) , typename p0##_type, typename p1##_type, typename p2##_type, \ + typename p3##_type, typename p4##_type, typename p5##_type, \ + typename p6##_type, typename p7##_type, typename p8##_type +#define GMOCK_INTERNAL_DECL_TYPE_AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6, p7, p8, p9) , typename p0##_type, typename p1##_type, \ + typename p2##_type, typename p3##_type, typename p4##_type, \ + typename p5##_type, typename p6##_type, typename p7##_type, \ + typename p8##_type, typename p9##_type + +// Initializes the value parameters. +#define GMOCK_INTERNAL_INIT_AND_0_VALUE_PARAMS()\ + () +#define GMOCK_INTERNAL_INIT_AND_1_VALUE_PARAMS(p0)\ + (p0##_type gmock_p0) : p0(gmock_p0) +#define GMOCK_INTERNAL_INIT_AND_2_VALUE_PARAMS(p0, p1)\ + (p0##_type gmock_p0, p1##_type gmock_p1) : p0(gmock_p0), p1(gmock_p1) +#define GMOCK_INTERNAL_INIT_AND_3_VALUE_PARAMS(p0, p1, p2)\ + (p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2) +#define GMOCK_INTERNAL_INIT_AND_4_VALUE_PARAMS(p0, p1, p2, p3)\ + (p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3) +#define GMOCK_INTERNAL_INIT_AND_5_VALUE_PARAMS(p0, p1, p2, p3, p4)\ + (p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3), p4(gmock_p4) +#define GMOCK_INTERNAL_INIT_AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, p5)\ + (p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5) +#define GMOCK_INTERNAL_INIT_AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6)\ + (p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6) +#define GMOCK_INTERNAL_INIT_AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, p7)\ + (p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), \ + p7(gmock_p7) +#define GMOCK_INTERNAL_INIT_AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8)\ + (p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7, \ + p8##_type gmock_p8) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), p7(gmock_p7), \ + p8(gmock_p8) +#define GMOCK_INTERNAL_INIT_AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8, p9)\ + (p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7, p8##_type gmock_p8, \ + p9##_type gmock_p9) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), p7(gmock_p7), \ + p8(gmock_p8), p9(gmock_p9) + +// Declares the fields for storing the value parameters. +#define GMOCK_INTERNAL_DEFN_AND_0_VALUE_PARAMS() +#define GMOCK_INTERNAL_DEFN_AND_1_VALUE_PARAMS(p0) p0##_type p0; +#define GMOCK_INTERNAL_DEFN_AND_2_VALUE_PARAMS(p0, p1) p0##_type p0; \ + p1##_type p1; +#define GMOCK_INTERNAL_DEFN_AND_3_VALUE_PARAMS(p0, p1, p2) p0##_type p0; \ + p1##_type p1; p2##_type p2; +#define GMOCK_INTERNAL_DEFN_AND_4_VALUE_PARAMS(p0, p1, p2, p3) p0##_type p0; \ + p1##_type p1; p2##_type p2; p3##_type p3; +#define GMOCK_INTERNAL_DEFN_AND_5_VALUE_PARAMS(p0, p1, p2, p3, \ + p4) p0##_type p0; p1##_type p1; p2##_type p2; p3##_type p3; p4##_type p4; +#define GMOCK_INTERNAL_DEFN_AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, \ + p5) p0##_type p0; p1##_type p1; p2##_type p2; p3##_type p3; p4##_type p4; \ + p5##_type p5; +#define GMOCK_INTERNAL_DEFN_AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6) p0##_type p0; p1##_type p1; p2##_type p2; p3##_type p3; p4##_type p4; \ + p5##_type p5; p6##_type p6; +#define GMOCK_INTERNAL_DEFN_AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7) p0##_type p0; p1##_type p1; p2##_type p2; p3##_type p3; p4##_type p4; \ + p5##_type p5; p6##_type p6; p7##_type p7; +#define GMOCK_INTERNAL_DEFN_AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8) p0##_type p0; p1##_type p1; p2##_type p2; p3##_type p3; \ + p4##_type p4; p5##_type p5; p6##_type p6; p7##_type p7; p8##_type p8; +#define GMOCK_INTERNAL_DEFN_AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8, p9) p0##_type p0; p1##_type p1; p2##_type p2; p3##_type p3; \ + p4##_type p4; p5##_type p5; p6##_type p6; p7##_type p7; p8##_type p8; \ + p9##_type p9; + +// Lists the value parameters. +#define GMOCK_INTERNAL_LIST_AND_0_VALUE_PARAMS() +#define GMOCK_INTERNAL_LIST_AND_1_VALUE_PARAMS(p0) p0 +#define GMOCK_INTERNAL_LIST_AND_2_VALUE_PARAMS(p0, p1) p0, p1 +#define GMOCK_INTERNAL_LIST_AND_3_VALUE_PARAMS(p0, p1, p2) p0, p1, p2 +#define GMOCK_INTERNAL_LIST_AND_4_VALUE_PARAMS(p0, p1, p2, p3) p0, p1, p2, p3 +#define GMOCK_INTERNAL_LIST_AND_5_VALUE_PARAMS(p0, p1, p2, p3, p4) p0, p1, \ + p2, p3, p4 +#define GMOCK_INTERNAL_LIST_AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, p5) p0, \ + p1, p2, p3, p4, p5 +#define GMOCK_INTERNAL_LIST_AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6) p0, p1, p2, p3, p4, p5, p6 +#define GMOCK_INTERNAL_LIST_AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7) p0, p1, p2, p3, p4, p5, p6, p7 +#define GMOCK_INTERNAL_LIST_AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8) p0, p1, p2, p3, p4, p5, p6, p7, p8 +#define GMOCK_INTERNAL_LIST_AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8, p9) p0, p1, p2, p3, p4, p5, p6, p7, p8, p9 + +// Lists the value parameter types. +#define GMOCK_INTERNAL_LIST_TYPE_AND_0_VALUE_PARAMS() +#define GMOCK_INTERNAL_LIST_TYPE_AND_1_VALUE_PARAMS(p0) , p0##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_2_VALUE_PARAMS(p0, p1) , p0##_type, \ + p1##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_3_VALUE_PARAMS(p0, p1, p2) , p0##_type, \ + p1##_type, p2##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_4_VALUE_PARAMS(p0, p1, p2, p3) , \ + p0##_type, p1##_type, p2##_type, p3##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_5_VALUE_PARAMS(p0, p1, p2, p3, p4) , \ + p0##_type, p1##_type, p2##_type, p3##_type, p4##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, p5) , \ + p0##_type, p1##_type, p2##_type, p3##_type, p4##_type, p5##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6) , p0##_type, p1##_type, p2##_type, p3##_type, p4##_type, p5##_type, \ + p6##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6, p7) , p0##_type, p1##_type, p2##_type, p3##_type, p4##_type, \ + p5##_type, p6##_type, p7##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6, p7, p8) , p0##_type, p1##_type, p2##_type, p3##_type, p4##_type, \ + p5##_type, p6##_type, p7##_type, p8##_type +#define GMOCK_INTERNAL_LIST_TYPE_AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6, p7, p8, p9) , p0##_type, p1##_type, p2##_type, p3##_type, p4##_type, \ + p5##_type, p6##_type, p7##_type, p8##_type, p9##_type + +// Declares the value parameters. +#define GMOCK_INTERNAL_DECL_AND_0_VALUE_PARAMS() +#define GMOCK_INTERNAL_DECL_AND_1_VALUE_PARAMS(p0) p0##_type p0 +#define GMOCK_INTERNAL_DECL_AND_2_VALUE_PARAMS(p0, p1) p0##_type p0, \ + p1##_type p1 +#define GMOCK_INTERNAL_DECL_AND_3_VALUE_PARAMS(p0, p1, p2) p0##_type p0, \ + p1##_type p1, p2##_type p2 +#define GMOCK_INTERNAL_DECL_AND_4_VALUE_PARAMS(p0, p1, p2, p3) p0##_type p0, \ + p1##_type p1, p2##_type p2, p3##_type p3 +#define GMOCK_INTERNAL_DECL_AND_5_VALUE_PARAMS(p0, p1, p2, p3, \ + p4) p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, p4##_type p4 +#define GMOCK_INTERNAL_DECL_AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, \ + p5) p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, p4##_type p4, \ + p5##_type p5 +#define GMOCK_INTERNAL_DECL_AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, \ + p6) p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, p4##_type p4, \ + p5##_type p5, p6##_type p6 +#define GMOCK_INTERNAL_DECL_AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7) p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, p4##_type p4, \ + p5##_type p5, p6##_type p6, p7##_type p7 +#define GMOCK_INTERNAL_DECL_AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8) p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4, p5##_type p5, p6##_type p6, p7##_type p7, p8##_type p8 +#define GMOCK_INTERNAL_DECL_AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8, p9) p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4, p5##_type p5, p6##_type p6, p7##_type p7, p8##_type p8, \ + p9##_type p9 + +// The suffix of the class template implementing the action template. +#define GMOCK_INTERNAL_COUNT_AND_0_VALUE_PARAMS() +#define GMOCK_INTERNAL_COUNT_AND_1_VALUE_PARAMS(p0) P +#define GMOCK_INTERNAL_COUNT_AND_2_VALUE_PARAMS(p0, p1) P2 +#define GMOCK_INTERNAL_COUNT_AND_3_VALUE_PARAMS(p0, p1, p2) P3 +#define GMOCK_INTERNAL_COUNT_AND_4_VALUE_PARAMS(p0, p1, p2, p3) P4 +#define GMOCK_INTERNAL_COUNT_AND_5_VALUE_PARAMS(p0, p1, p2, p3, p4) P5 +#define GMOCK_INTERNAL_COUNT_AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, p5) P6 +#define GMOCK_INTERNAL_COUNT_AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6) P7 +#define GMOCK_INTERNAL_COUNT_AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7) P8 +#define GMOCK_INTERNAL_COUNT_AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8) P9 +#define GMOCK_INTERNAL_COUNT_AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, \ + p7, p8, p9) P10 + +// The name of the class template implementing the action template. +#define GMOCK_ACTION_CLASS_(name, value_params)\ + GTEST_CONCAT_TOKEN_(name##Action, GMOCK_INTERNAL_COUNT_##value_params) + +#define ACTION_TEMPLATE(name, template_params, value_params)\ + template \ + class GMOCK_ACTION_CLASS_(name, value_params) {\ + public:\ + explicit GMOCK_ACTION_CLASS_(name, value_params)\ + GMOCK_INTERNAL_INIT_##value_params {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + explicit gmock_Impl GMOCK_INTERNAL_INIT_##value_params {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + GMOCK_INTERNAL_DEFN_##value_params\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(\ + new gmock_Impl(GMOCK_INTERNAL_LIST_##value_params));\ + }\ + GMOCK_INTERNAL_DEFN_##value_params\ + private:\ + GTEST_DISALLOW_ASSIGN_(GMOCK_ACTION_CLASS_(name, value_params));\ + };\ + template \ + inline GMOCK_ACTION_CLASS_(name, value_params)<\ + GMOCK_INTERNAL_LIST_##template_params\ + GMOCK_INTERNAL_LIST_TYPE_##value_params> name(\ + GMOCK_INTERNAL_DECL_##value_params) {\ + return GMOCK_ACTION_CLASS_(name, value_params)<\ + GMOCK_INTERNAL_LIST_##template_params\ + GMOCK_INTERNAL_LIST_TYPE_##value_params>(\ + GMOCK_INTERNAL_LIST_##value_params);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + GMOCK_ACTION_CLASS_(name, value_params)<\ + GMOCK_INTERNAL_LIST_##template_params\ + GMOCK_INTERNAL_LIST_TYPE_##value_params>::gmock_Impl::\ + gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION(name)\ + class name##Action {\ + public:\ + name##Action() {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl() {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl());\ + }\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##Action);\ + };\ + inline name##Action name() {\ + return name##Action();\ + }\ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##Action::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P(name, p0)\ + template \ + class name##ActionP {\ + public:\ + explicit name##ActionP(p0##_type gmock_p0) : p0(gmock_p0) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + explicit gmock_Impl(p0##_type gmock_p0) : p0(gmock_p0) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0));\ + }\ + p0##_type p0;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP);\ + };\ + template \ + inline name##ActionP name(p0##_type p0) {\ + return name##ActionP(p0);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P2(name, p0, p1)\ + template \ + class name##ActionP2 {\ + public:\ + name##ActionP2(p0##_type gmock_p0, p1##_type gmock_p1) : p0(gmock_p0), \ + p1(gmock_p1) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1) : p0(gmock_p0), \ + p1(gmock_p1) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP2);\ + };\ + template \ + inline name##ActionP2 name(p0##_type p0, \ + p1##_type p1) {\ + return name##ActionP2(p0, p1);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP2::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P3(name, p0, p1, p2)\ + template \ + class name##ActionP3 {\ + public:\ + name##ActionP3(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP3);\ + };\ + template \ + inline name##ActionP3 name(p0##_type p0, \ + p1##_type p1, p2##_type p2) {\ + return name##ActionP3(p0, p1, p2);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP3::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P4(name, p0, p1, p2, p3)\ + template \ + class name##ActionP4 {\ + public:\ + name##ActionP4(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2, p3));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP4);\ + };\ + template \ + inline name##ActionP4 name(p0##_type p0, p1##_type p1, p2##_type p2, \ + p3##_type p3) {\ + return name##ActionP4(p0, p1, \ + p2, p3);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP4::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P5(name, p0, p1, p2, p3, p4)\ + template \ + class name##ActionP5 {\ + public:\ + name##ActionP5(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, \ + p4##_type gmock_p4) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4) : p0(gmock_p0), \ + p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), p4(gmock_p4) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2, p3, p4));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP5);\ + };\ + template \ + inline name##ActionP5 name(p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4) {\ + return name##ActionP5(p0, p1, p2, p3, p4);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP5::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P6(name, p0, p1, p2, p3, p4, p5)\ + template \ + class name##ActionP6 {\ + public:\ + name##ActionP6(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2, p3, p4, p5));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP6);\ + };\ + template \ + inline name##ActionP6 name(p0##_type p0, p1##_type p1, p2##_type p2, \ + p3##_type p3, p4##_type p4, p5##_type p5) {\ + return name##ActionP6(p0, p1, p2, p3, p4, p5);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP6::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P7(name, p0, p1, p2, p3, p4, p5, p6)\ + template \ + class name##ActionP7 {\ + public:\ + name##ActionP7(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), \ + p6(gmock_p6) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2, p3, p4, p5, \ + p6));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP7);\ + };\ + template \ + inline name##ActionP7 name(p0##_type p0, p1##_type p1, \ + p2##_type p2, p3##_type p3, p4##_type p4, p5##_type p5, \ + p6##_type p6) {\ + return name##ActionP7(p0, p1, p2, p3, p4, p5, p6);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP7::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P8(name, p0, p1, p2, p3, p4, p5, p6, p7)\ + template \ + class name##ActionP8 {\ + public:\ + name##ActionP8(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6, \ + p7##_type gmock_p7) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), \ + p7(gmock_p7) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7) : p0(gmock_p0), \ + p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), p4(gmock_p4), \ + p5(gmock_p5), p6(gmock_p6), p7(gmock_p7) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2, p3, p4, p5, \ + p6, p7));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP8);\ + };\ + template \ + inline name##ActionP8 name(p0##_type p0, \ + p1##_type p1, p2##_type p2, p3##_type p3, p4##_type p4, p5##_type p5, \ + p6##_type p6, p7##_type p7) {\ + return name##ActionP8(p0, p1, p2, p3, p4, p5, \ + p6, p7);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP8::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P9(name, p0, p1, p2, p3, p4, p5, p6, p7, p8)\ + template \ + class name##ActionP9 {\ + public:\ + name##ActionP9(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6, p7##_type gmock_p7, \ + p8##_type gmock_p8) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), p7(gmock_p7), \ + p8(gmock_p8) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7, \ + p8##_type gmock_p8) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), \ + p7(gmock_p7), p8(gmock_p8) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2, p3, p4, p5, \ + p6, p7, p8));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP9);\ + };\ + template \ + inline name##ActionP9 name(p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4, p5##_type p5, p6##_type p6, p7##_type p7, \ + p8##_type p8) {\ + return name##ActionP9(p0, p1, p2, \ + p3, p4, p5, p6, p7, p8);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP9::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +#define ACTION_P10(name, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9)\ + template \ + class name##ActionP10 {\ + public:\ + name##ActionP10(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6, p7##_type gmock_p7, \ + p8##_type gmock_p8, p9##_type gmock_p9) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), \ + p7(gmock_p7), p8(gmock_p8), p9(gmock_p9) {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7, p8##_type gmock_p8, \ + p9##_type gmock_p9) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), \ + p7(gmock_p7), p8(gmock_p8), p9(gmock_p9) {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template \ + return_type gmock_PerformImpl(const args_type& args, arg0_type arg0, \ + arg1_type arg1, arg2_type arg2, arg3_type arg3, arg4_type arg4, \ + arg5_type arg5, arg6_type arg6, arg7_type arg7, arg8_type arg8, \ + arg9_type arg9) const;\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + p9##_type p9;\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl(p0, p1, p2, p3, p4, p5, \ + p6, p7, p8, p9));\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + p9##_type p9;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##ActionP10);\ + };\ + template \ + inline name##ActionP10 name(p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4, p5##_type p5, p6##_type p6, p7##_type p7, p8##_type p8, \ + p9##_type p9) {\ + return name##ActionP10(p0, \ + p1, p2, p3, p4, p5, p6, p7, p8, p9);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + name##ActionP10::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +namespace testing { + + +// The ACTION*() macros trigger warning C4100 (unreferenced formal +// parameter) in MSVC with -W4. Unfortunately they cannot be fixed in +// the macro definition, as the warnings are generated when the macro +// is expanded and macro expansion cannot contain #pragma. Therefore +// we suppress them here. +#ifdef _MSC_VER +# pragma warning(push) +# pragma warning(disable:4100) +#endif + +// Various overloads for InvokeArgument(). +// +// The InvokeArgument(a1, a2, ..., a_k) action invokes the N-th +// (0-based) argument, which must be a k-ary callable, of the mock +// function, with arguments a1, a2, ..., a_k. +// +// Notes: +// +// 1. The arguments are passed by value by default. If you need to +// pass an argument by reference, wrap it inside ByRef(). For +// example, +// +// InvokeArgument<1>(5, string("Hello"), ByRef(foo)) +// +// passes 5 and string("Hello") by value, and passes foo by +// reference. +// +// 2. If the callable takes an argument by reference but ByRef() is +// not used, it will receive the reference to a copy of the value, +// instead of the original value. For example, when the 0-th +// argument of the mock function takes a const string&, the action +// +// InvokeArgument<0>(string("Hello")) +// +// makes a copy of the temporary string("Hello") object and passes a +// reference of the copy, instead of the original temporary object, +// to the callable. This makes it easy for a user to define an +// InvokeArgument action from temporary values and have it performed +// later. + +namespace internal { +namespace invoke_argument { + +// Appears in InvokeArgumentAdl's argument list to help avoid +// accidental calls to user functions of the same name. +struct AdlTag {}; + +// InvokeArgumentAdl - a helper for InvokeArgument. +// The basic overloads are provided here for generic functors. +// Overloads for other custom-callables are provided in the +// internal/custom/callback-actions.h header. + +template +R InvokeArgumentAdl(AdlTag, F f) { + return f(); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1) { + return f(a1); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2) { + return f(a1, a2); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3) { + return f(a1, a2, a3); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3, A4 a4) { + return f(a1, a2, a3, a4); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5) { + return f(a1, a2, a3, a4, a5); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6) { + return f(a1, a2, a3, a4, a5, a6); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, + A7 a7) { + return f(a1, a2, a3, a4, a5, a6, a7); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, + A7 a7, A8 a8) { + return f(a1, a2, a3, a4, a5, a6, a7, a8); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, + A7 a7, A8 a8, A9 a9) { + return f(a1, a2, a3, a4, a5, a6, a7, a8, a9); +} +template +R InvokeArgumentAdl(AdlTag, F f, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, + A7 a7, A8 a8, A9 a9, A10 a10) { + return f(a1, a2, a3, a4, a5, a6, a7, a8, a9, a10); +} +} // namespace invoke_argument +} // namespace internal + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_0_VALUE_PARAMS()) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args)); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_1_VALUE_PARAMS(p0)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_2_VALUE_PARAMS(p0, p1)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_3_VALUE_PARAMS(p0, p1, p2)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_4_VALUE_PARAMS(p0, p1, p2, p3)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2, p3); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_5_VALUE_PARAMS(p0, p1, p2, p3, p4)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2, p3, p4); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, p5)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2, p3, p4, p5); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2, p3, p4, p5, p6); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, p7)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2, p3, p4, p5, p6, p7); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, p7, p8)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2, p3, p4, p5, p6, p7, p8); +} + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9)) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args), p0, p1, p2, p3, p4, p5, p6, p7, p8, p9); +} + +// Various overloads for ReturnNew(). +// +// The ReturnNew(a1, a2, ..., a_k) action returns a pointer to a new +// instance of type T, constructed on the heap with constructor arguments +// a1, a2, ..., and a_k. The caller assumes ownership of the returned value. +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_0_VALUE_PARAMS()) { + return new T(); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_1_VALUE_PARAMS(p0)) { + return new T(p0); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_2_VALUE_PARAMS(p0, p1)) { + return new T(p0, p1); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_3_VALUE_PARAMS(p0, p1, p2)) { + return new T(p0, p1, p2); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_4_VALUE_PARAMS(p0, p1, p2, p3)) { + return new T(p0, p1, p2, p3); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_5_VALUE_PARAMS(p0, p1, p2, p3, p4)) { + return new T(p0, p1, p2, p3, p4); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_6_VALUE_PARAMS(p0, p1, p2, p3, p4, p5)) { + return new T(p0, p1, p2, p3, p4, p5); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_7_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6)) { + return new T(p0, p1, p2, p3, p4, p5, p6); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_8_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, p7)) { + return new T(p0, p1, p2, p3, p4, p5, p6, p7); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_9_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, p7, p8)) { + return new T(p0, p1, p2, p3, p4, p5, p6, p7, p8); +} + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_10_VALUE_PARAMS(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9)) { + return new T(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9); +} + +#ifdef _MSC_VER +# pragma warning(pop) +#endif + +} // namespace testing + +// Include any custom actions added by the local installation. +// We must include this header at the end to make sure it can use the +// declarations from this file. +#include "gmock/internal/custom/gmock-generated-actions.h" + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_ diff --git a/googlemock/include/gmock/gmock-generated-actions.h.pump b/googlemock/include/gmock/gmock-generated-actions.h.pump new file mode 100644 index 0000000..66d9f9d --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-actions.h.pump @@ -0,0 +1,794 @@ +$$ -*- mode: c++; -*- +$$ This is a Pump source file. Please use Pump to convert it to +$$ gmock-generated-actions.h. +$$ +$var n = 10 $$ The maximum arity we support. +$$}} This meta comment fixes auto-indentation in editors. +// Copyright 2007, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements some commonly used variadic actions. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_ + +#include "gmock/gmock-actions.h" +#include "gmock/internal/gmock-port.h" + +namespace testing { +namespace internal { + +// InvokeHelper knows how to unpack an N-tuple and invoke an N-ary +// function or method with the unpacked values, where F is a function +// type that takes N arguments. +template +class InvokeHelper; + + +$range i 0..n +$for i [[ +$range j 1..i +$var types = [[$for j [[, typename A$j]]]] +$var as = [[$for j, [[A$j]]]] +$var args = [[$if i==0 [[]] $else [[ args]]]] +$var gets = [[$for j, [[get<$(j - 1)>(args)]]]] +template +class InvokeHelper > { + public: + template + static R Invoke(Function function, const ::testing::tuple<$as>&$args) { + return function($gets); + } + + template + static R InvokeMethod(Class* obj_ptr, + MethodPtr method_ptr, + const ::testing::tuple<$as>&$args) { + return (obj_ptr->*method_ptr)($gets); + } +}; + + +]] +// An INTERNAL macro for extracting the type of a tuple field. It's +// subject to change without notice - DO NOT USE IN USER CODE! +#define GMOCK_FIELD_(Tuple, N) \ + typename ::testing::tuple_element::type + +$range i 1..n + +// SelectArgs::type is the +// type of an n-ary function whose i-th (1-based) argument type is the +// k{i}-th (0-based) field of ArgumentTuple, which must be a tuple +// type, and whose return type is Result. For example, +// SelectArgs, 0, 3>::type +// is int(bool, long). +// +// SelectArgs::Select(args) +// returns the selected fields (k1, k2, ..., k_n) of args as a tuple. +// For example, +// SelectArgs, 2, 0>::Select( +// ::testing::make_tuple(true, 'a', 2.5)) +// returns tuple (2.5, true). +// +// The numbers in list k1, k2, ..., k_n must be >= 0, where n can be +// in the range [0, $n]. Duplicates are allowed and they don't have +// to be in an ascending or descending order. + +template +class SelectArgs { + public: + typedef Result type($for i, [[GMOCK_FIELD_(ArgumentTuple, k$i)]]); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& args) { + return SelectedArgs($for i, [[get(args)]]); + } +}; + + +$for i [[ +$range j 1..n +$range j1 1..i-1 +template +class SelectArgs { + public: + typedef Result type($for j1, [[GMOCK_FIELD_(ArgumentTuple, k$j1)]]); + typedef typename Function::ArgumentTuple SelectedArgs; + static SelectedArgs Select(const ArgumentTuple& [[]] +$if i == 1 [[/* args */]] $else [[args]]) { + return SelectedArgs($for j1, [[get(args)]]); + } +}; + + +]] +#undef GMOCK_FIELD_ + +$var ks = [[$for i, [[k$i]]]] + +// Implements the WithArgs action. +template +class WithArgsAction { + public: + explicit WithArgsAction(const InnerAction& action) : action_(action) {} + + template + operator Action() const { return MakeAction(new Impl(action_)); } + + private: + template + class Impl : public ActionInterface { + public: + typedef typename Function::Result Result; + typedef typename Function::ArgumentTuple ArgumentTuple; + + explicit Impl(const InnerAction& action) : action_(action) {} + + virtual Result Perform(const ArgumentTuple& args) { + return action_.Perform(SelectArgs::Select(args)); + } + + private: + typedef typename SelectArgs::type InnerFunctionType; + + Action action_; + }; + + const InnerAction action_; + + GTEST_DISALLOW_ASSIGN_(WithArgsAction); +}; + +// A macro from the ACTION* family (defined later in this file) +// defines an action that can be used in a mock function. Typically, +// these actions only care about a subset of the arguments of the mock +// function. For example, if such an action only uses the second +// argument, it can be used in any mock function that takes >= 2 +// arguments where the type of the second argument is compatible. +// +// Therefore, the action implementation must be prepared to take more +// arguments than it needs. The ExcessiveArg type is used to +// represent those excessive arguments. In order to keep the compiler +// error messages tractable, we define it in the testing namespace +// instead of testing::internal. However, this is an INTERNAL TYPE +// and subject to change without notice, so a user MUST NOT USE THIS +// TYPE DIRECTLY. +struct ExcessiveArg {}; + +// A helper class needed for implementing the ACTION* macros. +template +class ActionHelper { + public: +$range i 0..n +$for i + +[[ +$var template = [[$if i==0 [[]] $else [[ +$range j 0..i-1 + template <$for j, [[typename A$j]]> +]]]] +$range j 0..i-1 +$var As = [[$for j, [[A$j]]]] +$var as = [[$for j, [[get<$j>(args)]]]] +$range k 1..n-i +$var eas = [[$for k, [[ExcessiveArg()]]]] +$var arg_list = [[$if (i==0) | (i==n) [[$as$eas]] $else [[$as, $eas]]]] +$template + static Result Perform(Impl* impl, const ::testing::tuple<$As>& args) { + return impl->template gmock_PerformImpl<$As>(args, $arg_list); + } + +]] +}; + +} // namespace internal + +// Various overloads for Invoke(). + +// WithArgs(an_action) creates an action that passes +// the selected arguments of the mock function to an_action and +// performs it. It serves as an adaptor between actions with +// different argument lists. C++ doesn't support default arguments for +// function templates, so we have to overload it. + +$range i 1..n +$for i [[ +$range j 1..i +template <$for j [[int k$j, ]]typename InnerAction> +inline internal::WithArgsAction +WithArgs(const InnerAction& action) { + return internal::WithArgsAction(action); +} + + +]] +// Creates an action that does actions a1, a2, ..., sequentially in +// each invocation. +$range i 2..n +$for i [[ +$range j 2..i +$var types = [[$for j, [[typename Action$j]]]] +$var Aas = [[$for j [[, Action$j a$j]]]] + +template +$range k 1..i-1 + +inline $for k [[internal::DoBothAction]] + +DoAll(Action1 a1$Aas) { +$if i==2 [[ + + return internal::DoBothAction(a1, a2); +]] $else [[ +$range j2 2..i + + return DoAll(a1, DoAll($for j2, [[a$j2]])); +]] + +} + +]] + +} // namespace testing + +// The ACTION* family of macros can be used in a namespace scope to +// define custom actions easily. The syntax: +// +// ACTION(name) { statements; } +// +// will define an action with the given name that executes the +// statements. The value returned by the statements will be used as +// the return value of the action. Inside the statements, you can +// refer to the K-th (0-based) argument of the mock function by +// 'argK', and refer to its type by 'argK_type'. For example: +// +// ACTION(IncrementArg1) { +// arg1_type temp = arg1; +// return ++(*temp); +// } +// +// allows you to write +// +// ...WillOnce(IncrementArg1()); +// +// You can also refer to the entire argument tuple and its type by +// 'args' and 'args_type', and refer to the mock function type and its +// return type by 'function_type' and 'return_type'. +// +// Note that you don't need to specify the types of the mock function +// arguments. However rest assured that your code is still type-safe: +// you'll get a compiler error if *arg1 doesn't support the ++ +// operator, or if the type of ++(*arg1) isn't compatible with the +// mock function's return type, for example. +// +// Sometimes you'll want to parameterize the action. For that you can use +// another macro: +// +// ACTION_P(name, param_name) { statements; } +// +// For example: +// +// ACTION_P(Add, n) { return arg0 + n; } +// +// will allow you to write: +// +// ...WillOnce(Add(5)); +// +// Note that you don't need to provide the type of the parameter +// either. If you need to reference the type of a parameter named +// 'foo', you can write 'foo_type'. For example, in the body of +// ACTION_P(Add, n) above, you can write 'n_type' to refer to the type +// of 'n'. +// +// We also provide ACTION_P2, ACTION_P3, ..., up to ACTION_P$n to support +// multi-parameter actions. +// +// For the purpose of typing, you can view +// +// ACTION_Pk(Foo, p1, ..., pk) { ... } +// +// as shorthand for +// +// template +// FooActionPk Foo(p1_type p1, ..., pk_type pk) { ... } +// +// In particular, you can provide the template type arguments +// explicitly when invoking Foo(), as in Foo(5, false); +// although usually you can rely on the compiler to infer the types +// for you automatically. You can assign the result of expression +// Foo(p1, ..., pk) to a variable of type FooActionPk. This can be useful when composing actions. +// +// You can also overload actions with different numbers of parameters: +// +// ACTION_P(Plus, a) { ... } +// ACTION_P2(Plus, a, b) { ... } +// +// While it's tempting to always use the ACTION* macros when defining +// a new action, you should also consider implementing ActionInterface +// or using MakePolymorphicAction() instead, especially if you need to +// use the action a lot. While these approaches require more work, +// they give you more control on the types of the mock function +// arguments and the action parameters, which in general leads to +// better compiler error messages that pay off in the long run. They +// also allow overloading actions based on parameter types (as opposed +// to just based on the number of parameters). +// +// CAVEAT: +// +// ACTION*() can only be used in a namespace scope. The reason is +// that C++ doesn't yet allow function-local types to be used to +// instantiate templates. The up-coming C++0x standard will fix this. +// Once that's done, we'll consider supporting using ACTION*() inside +// a function. +// +// MORE INFORMATION: +// +// To learn more about using these macros, please search for 'ACTION' +// on http://code.google.com/p/googlemock/wiki/CookBook. + +$range i 0..n +$range k 0..n-1 + +// An internal macro needed for implementing ACTION*(). +#define GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_\ + const args_type& args GTEST_ATTRIBUTE_UNUSED_ +$for k [[, \ + arg$k[[]]_type arg$k GTEST_ATTRIBUTE_UNUSED_]] + + +// Sometimes you want to give an action explicit template parameters +// that cannot be inferred from its value parameters. ACTION() and +// ACTION_P*() don't support that. ACTION_TEMPLATE() remedies that +// and can be viewed as an extension to ACTION() and ACTION_P*(). +// +// The syntax: +// +// ACTION_TEMPLATE(ActionName, +// HAS_m_TEMPLATE_PARAMS(kind1, name1, ..., kind_m, name_m), +// AND_n_VALUE_PARAMS(p1, ..., p_n)) { statements; } +// +// defines an action template that takes m explicit template +// parameters and n value parameters. name_i is the name of the i-th +// template parameter, and kind_i specifies whether it's a typename, +// an integral constant, or a template. p_i is the name of the i-th +// value parameter. +// +// Example: +// +// // DuplicateArg(output) converts the k-th argument of the mock +// // function to type T and copies it to *output. +// ACTION_TEMPLATE(DuplicateArg, +// HAS_2_TEMPLATE_PARAMS(int, k, typename, T), +// AND_1_VALUE_PARAMS(output)) { +// *output = T(::testing::get(args)); +// } +// ... +// int n; +// EXPECT_CALL(mock, Foo(_, _)) +// .WillOnce(DuplicateArg<1, unsigned char>(&n)); +// +// To create an instance of an action template, write: +// +// ActionName(v1, ..., v_n) +// +// where the ts are the template arguments and the vs are the value +// arguments. The value argument types are inferred by the compiler. +// If you want to explicitly specify the value argument types, you can +// provide additional template arguments: +// +// ActionName(v1, ..., v_n) +// +// where u_i is the desired type of v_i. +// +// ACTION_TEMPLATE and ACTION/ACTION_P* can be overloaded on the +// number of value parameters, but not on the number of template +// parameters. Without the restriction, the meaning of the following +// is unclear: +// +// OverloadedAction(x); +// +// Are we using a single-template-parameter action where 'bool' refers +// to the type of x, or are we using a two-template-parameter action +// where the compiler is asked to infer the type of x? +// +// Implementation notes: +// +// GMOCK_INTERNAL_*_HAS_m_TEMPLATE_PARAMS and +// GMOCK_INTERNAL_*_AND_n_VALUE_PARAMS are internal macros for +// implementing ACTION_TEMPLATE. The main trick we use is to create +// new macro invocations when expanding a macro. For example, we have +// +// #define ACTION_TEMPLATE(name, template_params, value_params) +// ... GMOCK_INTERNAL_DECL_##template_params ... +// +// which causes ACTION_TEMPLATE(..., HAS_1_TEMPLATE_PARAMS(typename, T), ...) +// to expand to +// +// ... GMOCK_INTERNAL_DECL_HAS_1_TEMPLATE_PARAMS(typename, T) ... +// +// Since GMOCK_INTERNAL_DECL_HAS_1_TEMPLATE_PARAMS is a macro, the +// preprocessor will continue to expand it to +// +// ... typename T ... +// +// This technique conforms to the C++ standard and is portable. It +// allows us to implement action templates using O(N) code, where N is +// the maximum number of template/value parameters supported. Without +// using it, we'd have to devote O(N^2) amount of code to implement all +// combinations of m and n. + +// Declares the template parameters. + +$range j 1..n +$for j [[ +$range m 0..j-1 +#define GMOCK_INTERNAL_DECL_HAS_$j[[]] +_TEMPLATE_PARAMS($for m, [[kind$m, name$m]]) $for m, [[kind$m name$m]] + + +]] + +// Lists the template parameters. + +$for j [[ +$range m 0..j-1 +#define GMOCK_INTERNAL_LIST_HAS_$j[[]] +_TEMPLATE_PARAMS($for m, [[kind$m, name$m]]) $for m, [[name$m]] + + +]] + +// Declares the types of value parameters. + +$for i [[ +$range j 0..i-1 +#define GMOCK_INTERNAL_DECL_TYPE_AND_$i[[]] +_VALUE_PARAMS($for j, [[p$j]]) $for j [[, typename p$j##_type]] + + +]] + +// Initializes the value parameters. + +$for i [[ +$range j 0..i-1 +#define GMOCK_INTERNAL_INIT_AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]])\ + ($for j, [[p$j##_type gmock_p$j]])$if i>0 [[ : ]]$for j, [[p$j(gmock_p$j)]] + + +]] + +// Declares the fields for storing the value parameters. + +$for i [[ +$range j 0..i-1 +#define GMOCK_INTERNAL_DEFN_AND_$i[[]] +_VALUE_PARAMS($for j, [[p$j]]) $for j [[p$j##_type p$j; ]] + + +]] + +// Lists the value parameters. + +$for i [[ +$range j 0..i-1 +#define GMOCK_INTERNAL_LIST_AND_$i[[]] +_VALUE_PARAMS($for j, [[p$j]]) $for j, [[p$j]] + + +]] + +// Lists the value parameter types. + +$for i [[ +$range j 0..i-1 +#define GMOCK_INTERNAL_LIST_TYPE_AND_$i[[]] +_VALUE_PARAMS($for j, [[p$j]]) $for j [[, p$j##_type]] + + +]] + +// Declares the value parameters. + +$for i [[ +$range j 0..i-1 +#define GMOCK_INTERNAL_DECL_AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]]) [[]] +$for j, [[p$j##_type p$j]] + + +]] + +// The suffix of the class template implementing the action template. +$for i [[ + + +$range j 0..i-1 +#define GMOCK_INTERNAL_COUNT_AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]]) [[]] +$if i==1 [[P]] $elif i>=2 [[P$i]] +]] + + +// The name of the class template implementing the action template. +#define GMOCK_ACTION_CLASS_(name, value_params)\ + GTEST_CONCAT_TOKEN_(name##Action, GMOCK_INTERNAL_COUNT_##value_params) + +$range k 0..n-1 + +#define ACTION_TEMPLATE(name, template_params, value_params)\ + template \ + class GMOCK_ACTION_CLASS_(name, value_params) {\ + public:\ + explicit GMOCK_ACTION_CLASS_(name, value_params)\ + GMOCK_INTERNAL_INIT_##value_params {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + explicit gmock_Impl GMOCK_INTERNAL_INIT_##value_params {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template <$for k, [[typename arg$k[[]]_type]]>\ + return_type gmock_PerformImpl(const args_type& args[[]] +$for k [[, arg$k[[]]_type arg$k]]) const;\ + GMOCK_INTERNAL_DEFN_##value_params\ + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(\ + new gmock_Impl(GMOCK_INTERNAL_LIST_##value_params));\ + }\ + GMOCK_INTERNAL_DEFN_##value_params\ + private:\ + GTEST_DISALLOW_ASSIGN_(GMOCK_ACTION_CLASS_(name, value_params));\ + };\ + template \ + inline GMOCK_ACTION_CLASS_(name, value_params)<\ + GMOCK_INTERNAL_LIST_##template_params\ + GMOCK_INTERNAL_LIST_TYPE_##value_params> name(\ + GMOCK_INTERNAL_DECL_##value_params) {\ + return GMOCK_ACTION_CLASS_(name, value_params)<\ + GMOCK_INTERNAL_LIST_##template_params\ + GMOCK_INTERNAL_LIST_TYPE_##value_params>(\ + GMOCK_INTERNAL_LIST_##value_params);\ + }\ + template \ + template \ + template \ + typename ::testing::internal::Function::Result\ + GMOCK_ACTION_CLASS_(name, value_params)<\ + GMOCK_INTERNAL_LIST_##template_params\ + GMOCK_INTERNAL_LIST_TYPE_##value_params>::gmock_Impl::\ + gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const + +$for i + +[[ +$var template = [[$if i==0 [[]] $else [[ +$range j 0..i-1 + + template <$for j, [[typename p$j##_type]]>\ +]]]] +$var class_name = [[name##Action[[$if i==0 [[]] $elif i==1 [[P]] + $else [[P$i]]]]]] +$range j 0..i-1 +$var ctor_param_list = [[$for j, [[p$j##_type gmock_p$j]]]] +$var param_types_and_names = [[$for j, [[p$j##_type p$j]]]] +$var inits = [[$if i==0 [[]] $else [[ : $for j, [[p$j(gmock_p$j)]]]]]] +$var param_field_decls = [[$for j +[[ + + p$j##_type p$j;\ +]]]] +$var param_field_decls2 = [[$for j +[[ + + p$j##_type p$j;\ +]]]] +$var params = [[$for j, [[p$j]]]] +$var param_types = [[$if i==0 [[]] $else [[<$for j, [[p$j##_type]]>]]]] +$var typename_arg_types = [[$for k, [[typename arg$k[[]]_type]]]] +$var arg_types_and_names = [[$for k, [[arg$k[[]]_type arg$k]]]] +$var macro_name = [[$if i==0 [[ACTION]] $elif i==1 [[ACTION_P]] + $else [[ACTION_P$i]]]] + +#define $macro_name(name$for j [[, p$j]])\$template + class $class_name {\ + public:\ + [[$if i==1 [[explicit ]]]]$class_name($ctor_param_list)$inits {}\ + template \ + class gmock_Impl : public ::testing::ActionInterface {\ + public:\ + typedef F function_type;\ + typedef typename ::testing::internal::Function::Result return_type;\ + typedef typename ::testing::internal::Function::ArgumentTuple\ + args_type;\ + [[$if i==1 [[explicit ]]]]gmock_Impl($ctor_param_list)$inits {}\ + virtual return_type Perform(const args_type& args) {\ + return ::testing::internal::ActionHelper::\ + Perform(this, args);\ + }\ + template <$typename_arg_types>\ + return_type gmock_PerformImpl(const args_type& args, [[]] +$arg_types_and_names) const;\$param_field_decls + private:\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template operator ::testing::Action() const {\ + return ::testing::Action(new gmock_Impl($params));\ + }\$param_field_decls2 + private:\ + GTEST_DISALLOW_ASSIGN_($class_name);\ + };\$template + inline $class_name$param_types name($param_types_and_names) {\ + return $class_name$param_types($params);\ + }\$template + template \ + template <$typename_arg_types>\ + typename ::testing::internal::Function::Result\ + $class_name$param_types::gmock_Impl::gmock_PerformImpl(\ + GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const +]] +$$ } // This meta comment fixes auto-indentation in Emacs. It won't +$$ // show up in the generated code. + + +namespace testing { + + +// The ACTION*() macros trigger warning C4100 (unreferenced formal +// parameter) in MSVC with -W4. Unfortunately they cannot be fixed in +// the macro definition, as the warnings are generated when the macro +// is expanded and macro expansion cannot contain #pragma. Therefore +// we suppress them here. +#ifdef _MSC_VER +# pragma warning(push) +# pragma warning(disable:4100) +#endif + +// Various overloads for InvokeArgument(). +// +// The InvokeArgument(a1, a2, ..., a_k) action invokes the N-th +// (0-based) argument, which must be a k-ary callable, of the mock +// function, with arguments a1, a2, ..., a_k. +// +// Notes: +// +// 1. The arguments are passed by value by default. If you need to +// pass an argument by reference, wrap it inside ByRef(). For +// example, +// +// InvokeArgument<1>(5, string("Hello"), ByRef(foo)) +// +// passes 5 and string("Hello") by value, and passes foo by +// reference. +// +// 2. If the callable takes an argument by reference but ByRef() is +// not used, it will receive the reference to a copy of the value, +// instead of the original value. For example, when the 0-th +// argument of the mock function takes a const string&, the action +// +// InvokeArgument<0>(string("Hello")) +// +// makes a copy of the temporary string("Hello") object and passes a +// reference of the copy, instead of the original temporary object, +// to the callable. This makes it easy for a user to define an +// InvokeArgument action from temporary values and have it performed +// later. + +namespace internal { +namespace invoke_argument { + +// Appears in InvokeArgumentAdl's argument list to help avoid +// accidental calls to user functions of the same name. +struct AdlTag {}; + +// InvokeArgumentAdl - a helper for InvokeArgument. +// The basic overloads are provided here for generic functors. +// Overloads for other custom-callables are provided in the +// internal/custom/callback-actions.h header. + +$range i 0..n +$for i +[[ +$range j 1..i + +template +R InvokeArgumentAdl(AdlTag, F f[[$for j [[, A$j a$j]]]]) { + return f([[$for j, [[a$j]]]]); +} +]] + +} // namespace invoke_argument +} // namespace internal + +$range i 0..n +$for i [[ +$range j 0..i-1 + +ACTION_TEMPLATE(InvokeArgument, + HAS_1_TEMPLATE_PARAMS(int, k), + AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]])) { + using internal::invoke_argument::InvokeArgumentAdl; + return InvokeArgumentAdl( + internal::invoke_argument::AdlTag(), + ::testing::get(args)$for j [[, p$j]]); +} + +]] + +// Various overloads for ReturnNew(). +// +// The ReturnNew(a1, a2, ..., a_k) action returns a pointer to a new +// instance of type T, constructed on the heap with constructor arguments +// a1, a2, ..., and a_k. The caller assumes ownership of the returned value. +$range i 0..n +$for i [[ +$range j 0..i-1 +$var ps = [[$for j, [[p$j]]]] + +ACTION_TEMPLATE(ReturnNew, + HAS_1_TEMPLATE_PARAMS(typename, T), + AND_$i[[]]_VALUE_PARAMS($ps)) { + return new T($ps); +} + +]] + +#ifdef _MSC_VER +# pragma warning(pop) +#endif + +} // namespace testing + +// Include any custom callback actions added by the local installation. +// We must include this header at the end to make sure it can use the +// declarations from this file. +#include "gmock/internal/custom/gmock-generated-actions.h" + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_ diff --git a/googlemock/include/gmock/gmock-generated-function-mockers.h b/googlemock/include/gmock/gmock-generated-function-mockers.h new file mode 100644 index 0000000..4fa5ca9 --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-function-mockers.h @@ -0,0 +1,1095 @@ +// This file was GENERATED by command: +// pump.py gmock-generated-function-mockers.h.pump +// DO NOT EDIT BY HAND!!! + +// Copyright 2007, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements function mockers of various arities. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_ + +#include "gmock/gmock-spec-builders.h" +#include "gmock/internal/gmock-internal-utils.h" + +#if GTEST_HAS_STD_FUNCTION_ +# include +#endif + +namespace testing { +namespace internal { + +template +class FunctionMockerBase; + +// Note: class FunctionMocker really belongs to the ::testing +// namespace. However if we define it in ::testing, MSVC will +// complain when classes in ::testing::internal declare it as a +// friend class template. To workaround this compiler bug, we define +// FunctionMocker in ::testing::internal and import it into ::testing. +template +class FunctionMocker; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With() { + return this->current_spec(); + } + + R Invoke() { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple()); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1) { + this->current_spec().SetMatchers(::testing::make_tuple(m1)); + return this->current_spec(); + } + + R Invoke(A1 a1) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3, A4); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3, const Matcher& m4) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3, m4)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3, A4 a4) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3, a4)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3, A4, A5); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3, const Matcher& m4, const Matcher& m5) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3, m4, m5)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3, A4 a4, A5 a5) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3, a4, a5)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3, A4, A5, A6); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3, const Matcher& m4, const Matcher& m5, + const Matcher& m6) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3, m4, m5, + m6)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3, a4, a5, a6)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3, A4, A5, A6, A7); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3, const Matcher& m4, const Matcher& m5, + const Matcher& m6, const Matcher& m7) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3, m4, m5, + m6, m7)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, A7 a7) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3, a4, a5, a6, a7)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3, A4, A5, A6, A7, A8); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3, const Matcher& m4, const Matcher& m5, + const Matcher& m6, const Matcher& m7, const Matcher& m8) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3, m4, m5, + m6, m7, m8)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, A7 a7, A8 a8) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3, a4, a5, a6, a7, a8)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3, A4, A5, A6, A7, A8, A9); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3, const Matcher& m4, const Matcher& m5, + const Matcher& m6, const Matcher& m7, const Matcher& m8, + const Matcher& m9) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3, m4, m5, + m6, m7, m8, m9)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, A7 a7, A8 a8, A9 a9) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3, a4, a5, a6, a7, a8, a9)); + } +}; + +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F(A1, A2, A3, A4, A5, A6, A7, A8, A9, A10); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With(const Matcher& m1, const Matcher& m2, + const Matcher& m3, const Matcher& m4, const Matcher& m5, + const Matcher& m6, const Matcher& m7, const Matcher& m8, + const Matcher& m9, const Matcher& m10) { + this->current_spec().SetMatchers(::testing::make_tuple(m1, m2, m3, m4, m5, + m6, m7, m8, m9, m10)); + return this->current_spec(); + } + + R Invoke(A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, A7 a7, A8 a8, A9 a9, + A10 a10) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple(a1, a2, a3, a4, a5, a6, a7, a8, a9, + a10)); + } +}; + +} // namespace internal + +// The style guide prohibits "using" statements in a namespace scope +// inside a header file. However, the FunctionMocker class template +// is meant to be defined in the ::testing namespace. The following +// line is just a trick for working around a bug in MSVC 8.0, which +// cannot handle it if we define FunctionMocker in ::testing. +using internal::FunctionMocker; + +// GMOCK_RESULT_(tn, F) expands to the result type of function type F. +// We define this as a variadic macro in case F contains unprotected +// commas (the same reason that we use variadic macros in other places +// in this file). +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_RESULT_(tn, ...) \ + tn ::testing::internal::Function<__VA_ARGS__>::Result + +// The type of argument N of the given function type. +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_ARG_(tn, N, ...) \ + tn ::testing::internal::Function<__VA_ARGS__>::Argument##N + +// The matcher type for argument N of the given function type. +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_MATCHER_(tn, N, ...) \ + const ::testing::Matcher& + +// The variable for mocking the given method. +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_MOCKER_(arity, constness, Method) \ + GTEST_CONCAT_TOKEN_(gmock##constness##arity##_##Method##_, __LINE__) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD0_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + ) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 0), \ + this_method_does_not_take_0_arguments); \ + GMOCK_MOCKER_(0, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(0, constness, Method).Invoke(); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method() constness { \ + GMOCK_MOCKER_(0, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(0, constness, Method).With(); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(0, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD1_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 1), \ + this_method_does_not_take_1_argument); \ + GMOCK_MOCKER_(1, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(1, constness, Method).Invoke(gmock_a1); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1) constness { \ + GMOCK_MOCKER_(1, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(1, constness, Method).With(gmock_a1); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(1, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD2_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 2), \ + this_method_does_not_take_2_arguments); \ + GMOCK_MOCKER_(2, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(2, constness, Method).Invoke(gmock_a1, gmock_a2); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2) constness { \ + GMOCK_MOCKER_(2, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(2, constness, Method).With(gmock_a1, gmock_a2); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(2, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD3_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 3), \ + this_method_does_not_take_3_arguments); \ + GMOCK_MOCKER_(3, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(3, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3) constness { \ + GMOCK_MOCKER_(3, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(3, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(3, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD4_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 4), \ + this_method_does_not_take_4_arguments); \ + GMOCK_MOCKER_(4, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(4, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4) constness { \ + GMOCK_MOCKER_(4, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(4, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(4, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD5_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_ARG_(tn, 5, __VA_ARGS__) gmock_a5) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 5), \ + this_method_does_not_take_5_arguments); \ + GMOCK_MOCKER_(5, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(5, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5) constness { \ + GMOCK_MOCKER_(5, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(5, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(5, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD6_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_ARG_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 6), \ + this_method_does_not_take_6_arguments); \ + GMOCK_MOCKER_(6, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(6, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6) constness { \ + GMOCK_MOCKER_(6, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(6, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(6, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD7_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_ARG_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 7), \ + this_method_does_not_take_7_arguments); \ + GMOCK_MOCKER_(7, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(7, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7) constness { \ + GMOCK_MOCKER_(7, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(7, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(7, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD8_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_ARG_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7, \ + GMOCK_ARG_(tn, 8, __VA_ARGS__) gmock_a8) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 8), \ + this_method_does_not_take_8_arguments); \ + GMOCK_MOCKER_(8, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(8, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7, \ + GMOCK_MATCHER_(tn, 8, __VA_ARGS__) gmock_a8) constness { \ + GMOCK_MOCKER_(8, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(8, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(8, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD9_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_ARG_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7, \ + GMOCK_ARG_(tn, 8, __VA_ARGS__) gmock_a8, \ + GMOCK_ARG_(tn, 9, __VA_ARGS__) gmock_a9) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 9), \ + this_method_does_not_take_9_arguments); \ + GMOCK_MOCKER_(9, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(9, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8, \ + gmock_a9); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7, \ + GMOCK_MATCHER_(tn, 8, __VA_ARGS__) gmock_a8, \ + GMOCK_MATCHER_(tn, 9, __VA_ARGS__) gmock_a9) constness { \ + GMOCK_MOCKER_(9, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(9, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8, \ + gmock_a9); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(9, constness, \ + Method) + +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD10_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_ARG_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_ARG_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7, \ + GMOCK_ARG_(tn, 8, __VA_ARGS__) gmock_a8, \ + GMOCK_ARG_(tn, 9, __VA_ARGS__) gmock_a9, \ + GMOCK_ARG_(tn, 10, __VA_ARGS__) gmock_a10) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value \ + == 10), \ + this_method_does_not_take_10_arguments); \ + GMOCK_MOCKER_(10, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_(10, constness, Method).Invoke(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8, gmock_a9, \ + gmock_a10); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \ + GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \ + GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \ + GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \ + GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \ + GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \ + GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7, \ + GMOCK_MATCHER_(tn, 8, __VA_ARGS__) gmock_a8, \ + GMOCK_MATCHER_(tn, 9, __VA_ARGS__) gmock_a9, \ + GMOCK_MATCHER_(tn, 10, \ + __VA_ARGS__) gmock_a10) constness { \ + GMOCK_MOCKER_(10, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_(10, constness, Method).With(gmock_a1, gmock_a2, \ + gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8, gmock_a9, \ + gmock_a10); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(10, constness, \ + Method) + +#define MOCK_METHOD0(m, ...) GMOCK_METHOD0_(, , , m, __VA_ARGS__) +#define MOCK_METHOD1(m, ...) GMOCK_METHOD1_(, , , m, __VA_ARGS__) +#define MOCK_METHOD2(m, ...) GMOCK_METHOD2_(, , , m, __VA_ARGS__) +#define MOCK_METHOD3(m, ...) GMOCK_METHOD3_(, , , m, __VA_ARGS__) +#define MOCK_METHOD4(m, ...) GMOCK_METHOD4_(, , , m, __VA_ARGS__) +#define MOCK_METHOD5(m, ...) GMOCK_METHOD5_(, , , m, __VA_ARGS__) +#define MOCK_METHOD6(m, ...) GMOCK_METHOD6_(, , , m, __VA_ARGS__) +#define MOCK_METHOD7(m, ...) GMOCK_METHOD7_(, , , m, __VA_ARGS__) +#define MOCK_METHOD8(m, ...) GMOCK_METHOD8_(, , , m, __VA_ARGS__) +#define MOCK_METHOD9(m, ...) GMOCK_METHOD9_(, , , m, __VA_ARGS__) +#define MOCK_METHOD10(m, ...) GMOCK_METHOD10_(, , , m, __VA_ARGS__) + +#define MOCK_CONST_METHOD0(m, ...) GMOCK_METHOD0_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD1(m, ...) GMOCK_METHOD1_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD2(m, ...) GMOCK_METHOD2_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD3(m, ...) GMOCK_METHOD3_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD4(m, ...) GMOCK_METHOD4_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD5(m, ...) GMOCK_METHOD5_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD6(m, ...) GMOCK_METHOD6_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD7(m, ...) GMOCK_METHOD7_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD8(m, ...) GMOCK_METHOD8_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD9(m, ...) GMOCK_METHOD9_(, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD10(m, ...) GMOCK_METHOD10_(, const, , m, __VA_ARGS__) + +#define MOCK_METHOD0_T(m, ...) GMOCK_METHOD0_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD1_T(m, ...) GMOCK_METHOD1_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD2_T(m, ...) GMOCK_METHOD2_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD3_T(m, ...) GMOCK_METHOD3_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD4_T(m, ...) GMOCK_METHOD4_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD5_T(m, ...) GMOCK_METHOD5_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD6_T(m, ...) GMOCK_METHOD6_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD7_T(m, ...) GMOCK_METHOD7_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD8_T(m, ...) GMOCK_METHOD8_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD9_T(m, ...) GMOCK_METHOD9_(typename, , , m, __VA_ARGS__) +#define MOCK_METHOD10_T(m, ...) GMOCK_METHOD10_(typename, , , m, __VA_ARGS__) + +#define MOCK_CONST_METHOD0_T(m, ...) \ + GMOCK_METHOD0_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD1_T(m, ...) \ + GMOCK_METHOD1_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD2_T(m, ...) \ + GMOCK_METHOD2_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD3_T(m, ...) \ + GMOCK_METHOD3_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD4_T(m, ...) \ + GMOCK_METHOD4_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD5_T(m, ...) \ + GMOCK_METHOD5_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD6_T(m, ...) \ + GMOCK_METHOD6_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD7_T(m, ...) \ + GMOCK_METHOD7_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD8_T(m, ...) \ + GMOCK_METHOD8_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD9_T(m, ...) \ + GMOCK_METHOD9_(typename, const, , m, __VA_ARGS__) +#define MOCK_CONST_METHOD10_T(m, ...) \ + GMOCK_METHOD10_(typename, const, , m, __VA_ARGS__) + +#define MOCK_METHOD0_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD0_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD1_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD1_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD2_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD2_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD3_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD3_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD4_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD4_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD5_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD5_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD6_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD6_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD7_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD7_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD8_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD8_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD9_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD9_(, , ct, m, __VA_ARGS__) +#define MOCK_METHOD10_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD10_(, , ct, m, __VA_ARGS__) + +#define MOCK_CONST_METHOD0_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD0_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD1_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD1_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD2_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD2_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD3_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD3_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD4_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD4_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD5_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD5_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD6_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD6_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD7_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD7_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD8_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD8_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD9_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD9_(, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD10_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD10_(, const, ct, m, __VA_ARGS__) + +#define MOCK_METHOD0_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD0_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD1_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD1_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD2_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD2_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD3_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD3_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD4_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD4_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD5_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD5_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD6_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD6_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD7_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD7_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD8_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD8_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD9_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD9_(typename, , ct, m, __VA_ARGS__) +#define MOCK_METHOD10_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD10_(typename, , ct, m, __VA_ARGS__) + +#define MOCK_CONST_METHOD0_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD0_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD1_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD1_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD2_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD2_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD3_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD3_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD4_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD4_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD5_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD5_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD6_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD6_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD7_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD7_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD8_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD8_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD9_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD9_(typename, const, ct, m, __VA_ARGS__) +#define MOCK_CONST_METHOD10_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD10_(typename, const, ct, m, __VA_ARGS__) + +// A MockFunction class has one mock method whose type is F. It is +// useful when you just want your test code to emit some messages and +// have Google Mock verify the right messages are sent (and perhaps at +// the right times). For example, if you are exercising code: +// +// Foo(1); +// Foo(2); +// Foo(3); +// +// and want to verify that Foo(1) and Foo(3) both invoke +// mock.Bar("a"), but Foo(2) doesn't invoke anything, you can write: +// +// TEST(FooTest, InvokesBarCorrectly) { +// MyMock mock; +// MockFunction check; +// { +// InSequence s; +// +// EXPECT_CALL(mock, Bar("a")); +// EXPECT_CALL(check, Call("1")); +// EXPECT_CALL(check, Call("2")); +// EXPECT_CALL(mock, Bar("a")); +// } +// Foo(1); +// check.Call("1"); +// Foo(2); +// check.Call("2"); +// Foo(3); +// } +// +// The expectation spec says that the first Bar("a") must happen +// before check point "1", the second Bar("a") must happen after check +// point "2", and nothing should happen between the two check +// points. The explicit check points make it easy to tell which +// Bar("a") is called by which call to Foo(). +// +// MockFunction can also be used to exercise code that accepts +// std::function callbacks. To do so, use AsStdFunction() method +// to create std::function proxy forwarding to original object's Call. +// Example: +// +// TEST(FooTest, RunsCallbackWithBarArgument) { +// MockFunction callback; +// EXPECT_CALL(callback, Call("bar")).WillOnce(Return(1)); +// Foo(callback.AsStdFunction()); +// } +template +class MockFunction; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD0_T(Call, R()); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this]() -> R { + return this->Call(); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD1_T(Call, R(A0)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0) -> R { + return this->Call(a0); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD2_T(Call, R(A0, A1)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1) -> R { + return this->Call(a0, a1); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD3_T(Call, R(A0, A1, A2)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2) -> R { + return this->Call(a0, a1, a2); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD4_T(Call, R(A0, A1, A2, A3)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2, A3 a3) -> R { + return this->Call(a0, a1, a2, a3); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD5_T(Call, R(A0, A1, A2, A3, A4)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) -> R { + return this->Call(a0, a1, a2, a3, a4); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD6_T(Call, R(A0, A1, A2, A3, A4, A5)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5) -> R { + return this->Call(a0, a1, a2, a3, a4, a5); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD7_T(Call, R(A0, A1, A2, A3, A4, A5, A6)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6) -> R { + return this->Call(a0, a1, a2, a3, a4, a5, a6); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD8_T(Call, R(A0, A1, A2, A3, A4, A5, A6, A7)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, A7 a7) -> R { + return this->Call(a0, a1, a2, a3, a4, a5, a6, a7); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD9_T(Call, R(A0, A1, A2, A3, A4, A5, A6, A7, A8)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, A7 a7, + A8 a8) -> R { + return this->Call(a0, a1, a2, a3, a4, a5, a6, a7, a8); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD10_T(Call, R(A0, A1, A2, A3, A4, A5, A6, A7, A8, A9)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this](A0 a0, A1 a1, A2 a2, A3 a3, A4 a4, A5 a5, A6 a6, A7 a7, + A8 a8, A9 a9) -> R { + return this->Call(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + +} // namespace testing + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_ diff --git a/googlemock/include/gmock/gmock-generated-function-mockers.h.pump b/googlemock/include/gmock/gmock-generated-function-mockers.h.pump new file mode 100644 index 0000000..811502d --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-function-mockers.h.pump @@ -0,0 +1,291 @@ +$$ -*- mode: c++; -*- +$$ This is a Pump source file. Please use Pump to convert it to +$$ gmock-generated-function-mockers.h. +$$ +$var n = 10 $$ The maximum arity we support. +// Copyright 2007, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements function mockers of various arities. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_ + +#include "gmock/gmock-spec-builders.h" +#include "gmock/internal/gmock-internal-utils.h" + +#if GTEST_HAS_STD_FUNCTION_ +# include +#endif + +namespace testing { +namespace internal { + +template +class FunctionMockerBase; + +// Note: class FunctionMocker really belongs to the ::testing +// namespace. However if we define it in ::testing, MSVC will +// complain when classes in ::testing::internal declare it as a +// friend class template. To workaround this compiler bug, we define +// FunctionMocker in ::testing::internal and import it into ::testing. +template +class FunctionMocker; + + +$range i 0..n +$for i [[ +$range j 1..i +$var typename_As = [[$for j [[, typename A$j]]]] +$var As = [[$for j, [[A$j]]]] +$var as = [[$for j, [[a$j]]]] +$var Aas = [[$for j, [[A$j a$j]]]] +$var ms = [[$for j, [[m$j]]]] +$var matchers = [[$for j, [[const Matcher& m$j]]]] +template +class FunctionMocker : public + internal::FunctionMockerBase { + public: + typedef R F($As); + typedef typename internal::Function::ArgumentTuple ArgumentTuple; + + MockSpec& With($matchers) { + +$if i >= 1 [[ + this->current_spec().SetMatchers(::testing::make_tuple($ms)); + +]] + return this->current_spec(); + } + + R Invoke($Aas) { + // Even though gcc and MSVC don't enforce it, 'this->' is required + // by the C++ standard [14.6.4] here, as the base class type is + // dependent on the template argument (and thus shouldn't be + // looked into when resolving InvokeWith). + return this->InvokeWith(ArgumentTuple($as)); + } +}; + + +]] +} // namespace internal + +// The style guide prohibits "using" statements in a namespace scope +// inside a header file. However, the FunctionMocker class template +// is meant to be defined in the ::testing namespace. The following +// line is just a trick for working around a bug in MSVC 8.0, which +// cannot handle it if we define FunctionMocker in ::testing. +using internal::FunctionMocker; + +// GMOCK_RESULT_(tn, F) expands to the result type of function type F. +// We define this as a variadic macro in case F contains unprotected +// commas (the same reason that we use variadic macros in other places +// in this file). +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_RESULT_(tn, ...) \ + tn ::testing::internal::Function<__VA_ARGS__>::Result + +// The type of argument N of the given function type. +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_ARG_(tn, N, ...) \ + tn ::testing::internal::Function<__VA_ARGS__>::Argument##N + +// The matcher type for argument N of the given function type. +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_MATCHER_(tn, N, ...) \ + const ::testing::Matcher& + +// The variable for mocking the given method. +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_MOCKER_(arity, constness, Method) \ + GTEST_CONCAT_TOKEN_(gmock##constness##arity##_##Method##_, __LINE__) + + +$for i [[ +$range j 1..i +$var arg_as = [[$for j, \ + [[GMOCK_ARG_(tn, $j, __VA_ARGS__) gmock_a$j]]]] +$var as = [[$for j, [[gmock_a$j]]]] +$var matcher_as = [[$for j, \ + [[GMOCK_MATCHER_(tn, $j, __VA_ARGS__) gmock_a$j]]]] +// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!! +#define GMOCK_METHOD$i[[]]_(tn, constness, ct, Method, ...) \ + GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \ + $arg_as) constness { \ + GTEST_COMPILE_ASSERT_((::testing::tuple_size< \ + tn ::testing::internal::Function<__VA_ARGS__>::ArgumentTuple>::value == $i), \ + this_method_does_not_take_$i[[]]_argument[[$if i != 1 [[s]]]]); \ + GMOCK_MOCKER_($i, constness, Method).SetOwnerAndName(this, #Method); \ + return GMOCK_MOCKER_($i, constness, Method).Invoke($as); \ + } \ + ::testing::MockSpec<__VA_ARGS__>& \ + gmock_##Method($matcher_as) constness { \ + GMOCK_MOCKER_($i, constness, Method).RegisterOwner(this); \ + return GMOCK_MOCKER_($i, constness, Method).With($as); \ + } \ + mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_($i, constness, Method) + + +]] +$for i [[ +#define MOCK_METHOD$i(m, ...) GMOCK_METHOD$i[[]]_(, , , m, __VA_ARGS__) + +]] + + +$for i [[ +#define MOCK_CONST_METHOD$i(m, ...) GMOCK_METHOD$i[[]]_(, const, , m, __VA_ARGS__) + +]] + + +$for i [[ +#define MOCK_METHOD$i[[]]_T(m, ...) GMOCK_METHOD$i[[]]_(typename, , , m, __VA_ARGS__) + +]] + + +$for i [[ +#define MOCK_CONST_METHOD$i[[]]_T(m, ...) \ + GMOCK_METHOD$i[[]]_(typename, const, , m, __VA_ARGS__) + +]] + + +$for i [[ +#define MOCK_METHOD$i[[]]_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD$i[[]]_(, , ct, m, __VA_ARGS__) + +]] + + +$for i [[ +#define MOCK_CONST_METHOD$i[[]]_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD$i[[]]_(, const, ct, m, __VA_ARGS__) + +]] + + +$for i [[ +#define MOCK_METHOD$i[[]]_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD$i[[]]_(typename, , ct, m, __VA_ARGS__) + +]] + + +$for i [[ +#define MOCK_CONST_METHOD$i[[]]_T_WITH_CALLTYPE(ct, m, ...) \ + GMOCK_METHOD$i[[]]_(typename, const, ct, m, __VA_ARGS__) + +]] + +// A MockFunction class has one mock method whose type is F. It is +// useful when you just want your test code to emit some messages and +// have Google Mock verify the right messages are sent (and perhaps at +// the right times). For example, if you are exercising code: +// +// Foo(1); +// Foo(2); +// Foo(3); +// +// and want to verify that Foo(1) and Foo(3) both invoke +// mock.Bar("a"), but Foo(2) doesn't invoke anything, you can write: +// +// TEST(FooTest, InvokesBarCorrectly) { +// MyMock mock; +// MockFunction check; +// { +// InSequence s; +// +// EXPECT_CALL(mock, Bar("a")); +// EXPECT_CALL(check, Call("1")); +// EXPECT_CALL(check, Call("2")); +// EXPECT_CALL(mock, Bar("a")); +// } +// Foo(1); +// check.Call("1"); +// Foo(2); +// check.Call("2"); +// Foo(3); +// } +// +// The expectation spec says that the first Bar("a") must happen +// before check point "1", the second Bar("a") must happen after check +// point "2", and nothing should happen between the two check +// points. The explicit check points make it easy to tell which +// Bar("a") is called by which call to Foo(). +// +// MockFunction can also be used to exercise code that accepts +// std::function callbacks. To do so, use AsStdFunction() method +// to create std::function proxy forwarding to original object's Call. +// Example: +// +// TEST(FooTest, RunsCallbackWithBarArgument) { +// MockFunction callback; +// EXPECT_CALL(callback, Call("bar")).WillOnce(Return(1)); +// Foo(callback.AsStdFunction()); +// } +template +class MockFunction; + + +$for i [[ +$range j 0..i-1 +$var ArgTypes = [[$for j, [[A$j]]]] +$var ArgNames = [[$for j, [[a$j]]]] +$var ArgDecls = [[$for j, [[A$j a$j]]]] +template +class MockFunction { + public: + MockFunction() {} + + MOCK_METHOD$i[[]]_T(Call, R($ArgTypes)); + +#if GTEST_HAS_STD_FUNCTION_ + std::function AsStdFunction() { + return [this]($ArgDecls) -> R { + return this->Call($ArgNames); + }; + } +#endif // GTEST_HAS_STD_FUNCTION_ + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(MockFunction); +}; + + +]] +} // namespace testing + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_ diff --git a/googlemock/include/gmock/gmock-generated-matchers.h b/googlemock/include/gmock/gmock-generated-matchers.h new file mode 100644 index 0000000..57056fd --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-matchers.h @@ -0,0 +1,2179 @@ +// This file was GENERATED by command: +// pump.py gmock-generated-matchers.h.pump +// DO NOT EDIT BY HAND!!! + +// Copyright 2008, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements some commonly used variadic matchers. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_ + +#include +#include +#include +#include +#include "gmock/gmock-matchers.h" + +namespace testing { +namespace internal { + +// The type of the i-th (0-based) field of Tuple. +#define GMOCK_FIELD_TYPE_(Tuple, i) \ + typename ::testing::tuple_element::type + +// TupleFields is for selecting fields from a +// tuple of type Tuple. It has two members: +// +// type: a tuple type whose i-th field is the ki-th field of Tuple. +// GetSelectedFields(t): returns fields k0, ..., and kn of t as a tuple. +// +// For example, in class TupleFields, 2, 0>, we have: +// +// type is tuple, and +// GetSelectedFields(make_tuple(true, 'a', 42)) is (42, true). + +template +class TupleFields; + +// This generic version is used when there are 10 selectors. +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t), get(t), get(t), + get(t), get(t), get(t), get(t), get(t)); + } +}; + +// The following specialization is used for 0 ~ 9 selectors. + +template +class TupleFields { + public: + typedef ::testing::tuple<> type; + static type GetSelectedFields(const Tuple& /* t */) { + return type(); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t), get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t), get(t), get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t), get(t), get(t), + get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t), get(t), get(t), + get(t), get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t), get(t), get(t), + get(t), get(t), get(t)); + } +}; + +template +class TupleFields { + public: + typedef ::testing::tuple type; + static type GetSelectedFields(const Tuple& t) { + return type(get(t), get(t), get(t), get(t), get(t), + get(t), get(t), get(t), get(t)); + } +}; + +#undef GMOCK_FIELD_TYPE_ + +// Implements the Args() matcher. +template +class ArgsMatcherImpl : public MatcherInterface { + public: + // ArgsTuple may have top-level const or reference modifiers. + typedef GTEST_REMOVE_REFERENCE_AND_CONST_(ArgsTuple) RawArgsTuple; + typedef typename internal::TupleFields::type SelectedArgs; + typedef Matcher MonomorphicInnerMatcher; + + template + explicit ArgsMatcherImpl(const InnerMatcher& inner_matcher) + : inner_matcher_(SafeMatcherCast(inner_matcher)) {} + + virtual bool MatchAndExplain(ArgsTuple args, + MatchResultListener* listener) const { + const SelectedArgs& selected_args = GetSelectedArgs(args); + if (!listener->IsInterested()) + return inner_matcher_.Matches(selected_args); + + PrintIndices(listener->stream()); + *listener << "are " << PrintToString(selected_args); + + StringMatchResultListener inner_listener; + const bool match = inner_matcher_.MatchAndExplain(selected_args, + &inner_listener); + PrintIfNotEmpty(inner_listener.str(), listener->stream()); + return match; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "are a tuple "; + PrintIndices(os); + inner_matcher_.DescribeTo(os); + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "are a tuple "; + PrintIndices(os); + inner_matcher_.DescribeNegationTo(os); + } + + private: + static SelectedArgs GetSelectedArgs(ArgsTuple args) { + return TupleFields::GetSelectedFields(args); + } + + // Prints the indices of the selected fields. + static void PrintIndices(::std::ostream* os) { + *os << "whose fields ("; + const int indices[10] = { k0, k1, k2, k3, k4, k5, k6, k7, k8, k9 }; + for (int i = 0; i < 10; i++) { + if (indices[i] < 0) + break; + + if (i >= 1) + *os << ", "; + + *os << "#" << indices[i]; + } + *os << ") "; + } + + const MonomorphicInnerMatcher inner_matcher_; + + GTEST_DISALLOW_ASSIGN_(ArgsMatcherImpl); +}; + +template +class ArgsMatcher { + public: + explicit ArgsMatcher(const InnerMatcher& inner_matcher) + : inner_matcher_(inner_matcher) {} + + template + operator Matcher() const { + return MakeMatcher(new ArgsMatcherImpl(inner_matcher_)); + } + + private: + const InnerMatcher inner_matcher_; + + GTEST_DISALLOW_ASSIGN_(ArgsMatcher); +}; + +// A set of metafunctions for computing the result type of AllOf. +// AllOf(m1, ..., mN) returns +// AllOfResultN::type. + +// Although AllOf isn't defined for one argument, AllOfResult1 is defined +// to simplify the implementation. +template +struct AllOfResult1 { + typedef M1 type; +}; + +template +struct AllOfResult2 { + typedef BothOfMatcher< + typename AllOfResult1::type, + typename AllOfResult1::type + > type; +}; + +template +struct AllOfResult3 { + typedef BothOfMatcher< + typename AllOfResult1::type, + typename AllOfResult2::type + > type; +}; + +template +struct AllOfResult4 { + typedef BothOfMatcher< + typename AllOfResult2::type, + typename AllOfResult2::type + > type; +}; + +template +struct AllOfResult5 { + typedef BothOfMatcher< + typename AllOfResult2::type, + typename AllOfResult3::type + > type; +}; + +template +struct AllOfResult6 { + typedef BothOfMatcher< + typename AllOfResult3::type, + typename AllOfResult3::type + > type; +}; + +template +struct AllOfResult7 { + typedef BothOfMatcher< + typename AllOfResult3::type, + typename AllOfResult4::type + > type; +}; + +template +struct AllOfResult8 { + typedef BothOfMatcher< + typename AllOfResult4::type, + typename AllOfResult4::type + > type; +}; + +template +struct AllOfResult9 { + typedef BothOfMatcher< + typename AllOfResult4::type, + typename AllOfResult5::type + > type; +}; + +template +struct AllOfResult10 { + typedef BothOfMatcher< + typename AllOfResult5::type, + typename AllOfResult5::type + > type; +}; + +// A set of metafunctions for computing the result type of AnyOf. +// AnyOf(m1, ..., mN) returns +// AnyOfResultN::type. + +// Although AnyOf isn't defined for one argument, AnyOfResult1 is defined +// to simplify the implementation. +template +struct AnyOfResult1 { + typedef M1 type; +}; + +template +struct AnyOfResult2 { + typedef EitherOfMatcher< + typename AnyOfResult1::type, + typename AnyOfResult1::type + > type; +}; + +template +struct AnyOfResult3 { + typedef EitherOfMatcher< + typename AnyOfResult1::type, + typename AnyOfResult2::type + > type; +}; + +template +struct AnyOfResult4 { + typedef EitherOfMatcher< + typename AnyOfResult2::type, + typename AnyOfResult2::type + > type; +}; + +template +struct AnyOfResult5 { + typedef EitherOfMatcher< + typename AnyOfResult2::type, + typename AnyOfResult3::type + > type; +}; + +template +struct AnyOfResult6 { + typedef EitherOfMatcher< + typename AnyOfResult3::type, + typename AnyOfResult3::type + > type; +}; + +template +struct AnyOfResult7 { + typedef EitherOfMatcher< + typename AnyOfResult3::type, + typename AnyOfResult4::type + > type; +}; + +template +struct AnyOfResult8 { + typedef EitherOfMatcher< + typename AnyOfResult4::type, + typename AnyOfResult4::type + > type; +}; + +template +struct AnyOfResult9 { + typedef EitherOfMatcher< + typename AnyOfResult4::type, + typename AnyOfResult5::type + > type; +}; + +template +struct AnyOfResult10 { + typedef EitherOfMatcher< + typename AnyOfResult5::type, + typename AnyOfResult5::type + > type; +}; + +} // namespace internal + +// Args(a_matcher) matches a tuple if the selected +// fields of it matches a_matcher. C++ doesn't support default +// arguments for function templates, so we have to overload it. +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +template +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + +// ElementsAre(e_1, e_2, ... e_n) matches an STL-style container with +// n elements, where the i-th element in the container must +// match the i-th argument in the list. Each argument of +// ElementsAre() can be either a value or a matcher. We support up to +// 10 arguments. +// +// The use of DecayArray in the implementation allows ElementsAre() +// to accept string literals, whose type is const char[N], but we +// want to treat them as const char*. +// +// NOTE: Since ElementsAre() cares about the order of the elements, it +// must not be used with containers whose elements's order is +// undefined (e.g. hash_map). + +inline internal::ElementsAreMatcher< + ::testing::tuple<> > +ElementsAre() { + typedef ::testing::tuple<> Args; + return internal::ElementsAreMatcher(Args()); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type> > +ElementsAre(const T1& e1) { + typedef ::testing::tuple< + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3, e4)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3, e4, e5)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3, e4, e5, e6)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3, e4, e5, e6, e7)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7, const T8& e8) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3, e4, e5, e6, e7, + e8)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7, const T8& e8, const T9& e9) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3, e4, e5, e6, e7, + e8, e9)); +} + +template +inline internal::ElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +ElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7, const T8& e8, const T9& e9, + const T10& e10) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::ElementsAreMatcher(Args(e1, e2, e3, e4, e5, e6, e7, + e8, e9, e10)); +} + +// UnorderedElementsAre(e_1, e_2, ..., e_n) is an ElementsAre extension +// that matches n elements in any order. We support up to n=10 arguments. + +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple<> > +UnorderedElementsAre() { + typedef ::testing::tuple<> Args; + return internal::UnorderedElementsAreMatcher(Args()); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1) { + typedef ::testing::tuple< + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3, e4)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3, e4, e5)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3, e4, e5, + e6)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3, e4, e5, + e6, e7)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7, const T8& e8) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3, e4, e5, + e6, e7, e8)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7, const T8& e8, const T9& e9) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3, e4, e5, + e6, e7, e8, e9)); +} + +template +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> > +UnorderedElementsAre(const T1& e1, const T2& e2, const T3& e3, const T4& e4, + const T5& e5, const T6& e6, const T7& e7, const T8& e8, const T9& e9, + const T10& e10) { + typedef ::testing::tuple< + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type, + typename internal::DecayArray::type> Args; + return internal::UnorderedElementsAreMatcher(Args(e1, e2, e3, e4, e5, + e6, e7, e8, e9, e10)); +} + +// AllOf(m1, m2, ..., mk) matches any value that matches all of the given +// sub-matchers. AllOf is called fully qualified to prevent ADL from firing. + +template +inline typename internal::AllOfResult2::type +AllOf(M1 m1, M2 m2) { + return typename internal::AllOfResult2::type( + m1, + m2); +} + +template +inline typename internal::AllOfResult3::type +AllOf(M1 m1, M2 m2, M3 m3) { + return typename internal::AllOfResult3::type( + m1, + ::testing::AllOf(m2, m3)); +} + +template +inline typename internal::AllOfResult4::type +AllOf(M1 m1, M2 m2, M3 m3, M4 m4) { + return typename internal::AllOfResult4::type( + ::testing::AllOf(m1, m2), + ::testing::AllOf(m3, m4)); +} + +template +inline typename internal::AllOfResult5::type +AllOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5) { + return typename internal::AllOfResult5::type( + ::testing::AllOf(m1, m2), + ::testing::AllOf(m3, m4, m5)); +} + +template +inline typename internal::AllOfResult6::type +AllOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6) { + return typename internal::AllOfResult6::type( + ::testing::AllOf(m1, m2, m3), + ::testing::AllOf(m4, m5, m6)); +} + +template +inline typename internal::AllOfResult7::type +AllOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7) { + return typename internal::AllOfResult7::type( + ::testing::AllOf(m1, m2, m3), + ::testing::AllOf(m4, m5, m6, m7)); +} + +template +inline typename internal::AllOfResult8::type +AllOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7, M8 m8) { + return typename internal::AllOfResult8::type( + ::testing::AllOf(m1, m2, m3, m4), + ::testing::AllOf(m5, m6, m7, m8)); +} + +template +inline typename internal::AllOfResult9::type +AllOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7, M8 m8, M9 m9) { + return typename internal::AllOfResult9::type( + ::testing::AllOf(m1, m2, m3, m4), + ::testing::AllOf(m5, m6, m7, m8, m9)); +} + +template +inline typename internal::AllOfResult10::type +AllOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7, M8 m8, M9 m9, M10 m10) { + return typename internal::AllOfResult10::type( + ::testing::AllOf(m1, m2, m3, m4, m5), + ::testing::AllOf(m6, m7, m8, m9, m10)); +} + +// AnyOf(m1, m2, ..., mk) matches any value that matches any of the given +// sub-matchers. AnyOf is called fully qualified to prevent ADL from firing. + +template +inline typename internal::AnyOfResult2::type +AnyOf(M1 m1, M2 m2) { + return typename internal::AnyOfResult2::type( + m1, + m2); +} + +template +inline typename internal::AnyOfResult3::type +AnyOf(M1 m1, M2 m2, M3 m3) { + return typename internal::AnyOfResult3::type( + m1, + ::testing::AnyOf(m2, m3)); +} + +template +inline typename internal::AnyOfResult4::type +AnyOf(M1 m1, M2 m2, M3 m3, M4 m4) { + return typename internal::AnyOfResult4::type( + ::testing::AnyOf(m1, m2), + ::testing::AnyOf(m3, m4)); +} + +template +inline typename internal::AnyOfResult5::type +AnyOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5) { + return typename internal::AnyOfResult5::type( + ::testing::AnyOf(m1, m2), + ::testing::AnyOf(m3, m4, m5)); +} + +template +inline typename internal::AnyOfResult6::type +AnyOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6) { + return typename internal::AnyOfResult6::type( + ::testing::AnyOf(m1, m2, m3), + ::testing::AnyOf(m4, m5, m6)); +} + +template +inline typename internal::AnyOfResult7::type +AnyOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7) { + return typename internal::AnyOfResult7::type( + ::testing::AnyOf(m1, m2, m3), + ::testing::AnyOf(m4, m5, m6, m7)); +} + +template +inline typename internal::AnyOfResult8::type +AnyOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7, M8 m8) { + return typename internal::AnyOfResult8::type( + ::testing::AnyOf(m1, m2, m3, m4), + ::testing::AnyOf(m5, m6, m7, m8)); +} + +template +inline typename internal::AnyOfResult9::type +AnyOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7, M8 m8, M9 m9) { + return typename internal::AnyOfResult9::type( + ::testing::AnyOf(m1, m2, m3, m4), + ::testing::AnyOf(m5, m6, m7, m8, m9)); +} + +template +inline typename internal::AnyOfResult10::type +AnyOf(M1 m1, M2 m2, M3 m3, M4 m4, M5 m5, M6 m6, M7 m7, M8 m8, M9 m9, M10 m10) { + return typename internal::AnyOfResult10::type( + ::testing::AnyOf(m1, m2, m3, m4, m5), + ::testing::AnyOf(m6, m7, m8, m9, m10)); +} + +} // namespace testing + + +// The MATCHER* family of macros can be used in a namespace scope to +// define custom matchers easily. +// +// Basic Usage +// =========== +// +// The syntax +// +// MATCHER(name, description_string) { statements; } +// +// defines a matcher with the given name that executes the statements, +// which must return a bool to indicate if the match succeeds. Inside +// the statements, you can refer to the value being matched by 'arg', +// and refer to its type by 'arg_type'. +// +// The description string documents what the matcher does, and is used +// to generate the failure message when the match fails. Since a +// MATCHER() is usually defined in a header file shared by multiple +// C++ source files, we require the description to be a C-string +// literal to avoid possible side effects. It can be empty, in which +// case we'll use the sequence of words in the matcher name as the +// description. +// +// For example: +// +// MATCHER(IsEven, "") { return (arg % 2) == 0; } +// +// allows you to write +// +// // Expects mock_foo.Bar(n) to be called where n is even. +// EXPECT_CALL(mock_foo, Bar(IsEven())); +// +// or, +// +// // Verifies that the value of some_expression is even. +// EXPECT_THAT(some_expression, IsEven()); +// +// If the above assertion fails, it will print something like: +// +// Value of: some_expression +// Expected: is even +// Actual: 7 +// +// where the description "is even" is automatically calculated from the +// matcher name IsEven. +// +// Argument Type +// ============= +// +// Note that the type of the value being matched (arg_type) is +// determined by the context in which you use the matcher and is +// supplied to you by the compiler, so you don't need to worry about +// declaring it (nor can you). This allows the matcher to be +// polymorphic. For example, IsEven() can be used to match any type +// where the value of "(arg % 2) == 0" can be implicitly converted to +// a bool. In the "Bar(IsEven())" example above, if method Bar() +// takes an int, 'arg_type' will be int; if it takes an unsigned long, +// 'arg_type' will be unsigned long; and so on. +// +// Parameterizing Matchers +// ======================= +// +// Sometimes you'll want to parameterize the matcher. For that you +// can use another macro: +// +// MATCHER_P(name, param_name, description_string) { statements; } +// +// For example: +// +// MATCHER_P(HasAbsoluteValue, value, "") { return abs(arg) == value; } +// +// will allow you to write: +// +// EXPECT_THAT(Blah("a"), HasAbsoluteValue(n)); +// +// which may lead to this message (assuming n is 10): +// +// Value of: Blah("a") +// Expected: has absolute value 10 +// Actual: -9 +// +// Note that both the matcher description and its parameter are +// printed, making the message human-friendly. +// +// In the matcher definition body, you can write 'foo_type' to +// reference the type of a parameter named 'foo'. For example, in the +// body of MATCHER_P(HasAbsoluteValue, value) above, you can write +// 'value_type' to refer to the type of 'value'. +// +// We also provide MATCHER_P2, MATCHER_P3, ..., up to MATCHER_P10 to +// support multi-parameter matchers. +// +// Describing Parameterized Matchers +// ================================= +// +// The last argument to MATCHER*() is a string-typed expression. The +// expression can reference all of the matcher's parameters and a +// special bool-typed variable named 'negation'. When 'negation' is +// false, the expression should evaluate to the matcher's description; +// otherwise it should evaluate to the description of the negation of +// the matcher. For example, +// +// using testing::PrintToString; +// +// MATCHER_P2(InClosedRange, low, hi, +// string(negation ? "is not" : "is") + " in range [" + +// PrintToString(low) + ", " + PrintToString(hi) + "]") { +// return low <= arg && arg <= hi; +// } +// ... +// EXPECT_THAT(3, InClosedRange(4, 6)); +// EXPECT_THAT(3, Not(InClosedRange(2, 4))); +// +// would generate two failures that contain the text: +// +// Expected: is in range [4, 6] +// ... +// Expected: is not in range [2, 4] +// +// If you specify "" as the description, the failure message will +// contain the sequence of words in the matcher name followed by the +// parameter values printed as a tuple. For example, +// +// MATCHER_P2(InClosedRange, low, hi, "") { ... } +// ... +// EXPECT_THAT(3, InClosedRange(4, 6)); +// EXPECT_THAT(3, Not(InClosedRange(2, 4))); +// +// would generate two failures that contain the text: +// +// Expected: in closed range (4, 6) +// ... +// Expected: not (in closed range (2, 4)) +// +// Types of Matcher Parameters +// =========================== +// +// For the purpose of typing, you can view +// +// MATCHER_Pk(Foo, p1, ..., pk, description_string) { ... } +// +// as shorthand for +// +// template +// FooMatcherPk +// Foo(p1_type p1, ..., pk_type pk) { ... } +// +// When you write Foo(v1, ..., vk), the compiler infers the types of +// the parameters v1, ..., and vk for you. If you are not happy with +// the result of the type inference, you can specify the types by +// explicitly instantiating the template, as in Foo(5, +// false). As said earlier, you don't get to (or need to) specify +// 'arg_type' as that's determined by the context in which the matcher +// is used. You can assign the result of expression Foo(p1, ..., pk) +// to a variable of type FooMatcherPk. This +// can be useful when composing matchers. +// +// While you can instantiate a matcher template with reference types, +// passing the parameters by pointer usually makes your code more +// readable. If, however, you still want to pass a parameter by +// reference, be aware that in the failure message generated by the +// matcher you will see the value of the referenced object but not its +// address. +// +// Explaining Match Results +// ======================== +// +// Sometimes the matcher description alone isn't enough to explain why +// the match has failed or succeeded. For example, when expecting a +// long string, it can be very helpful to also print the diff between +// the expected string and the actual one. To achieve that, you can +// optionally stream additional information to a special variable +// named result_listener, whose type is a pointer to class +// MatchResultListener: +// +// MATCHER_P(EqualsLongString, str, "") { +// if (arg == str) return true; +// +// *result_listener << "the difference: " +/// << DiffStrings(str, arg); +// return false; +// } +// +// Overloading Matchers +// ==================== +// +// You can overload matchers with different numbers of parameters: +// +// MATCHER_P(Blah, a, description_string1) { ... } +// MATCHER_P2(Blah, a, b, description_string2) { ... } +// +// Caveats +// ======= +// +// When defining a new matcher, you should also consider implementing +// MatcherInterface or using MakePolymorphicMatcher(). These +// approaches require more work than the MATCHER* macros, but also +// give you more control on the types of the value being matched and +// the matcher parameters, which may leads to better compiler error +// messages when the matcher is used wrong. They also allow +// overloading matchers based on parameter types (as opposed to just +// based on the number of parameters). +// +// MATCHER*() can only be used in a namespace scope. The reason is +// that C++ doesn't yet allow function-local types to be used to +// instantiate templates. The up-coming C++0x standard will fix this. +// Once that's done, we'll consider supporting using MATCHER*() inside +// a function. +// +// More Information +// ================ +// +// To learn more about using these macros, please search for 'MATCHER' +// on http://code.google.com/p/googlemock/wiki/CookBook. + +#define MATCHER(name, description)\ + class name##Matcher {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl()\ + {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple<>()));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl());\ + }\ + name##Matcher() {\ + }\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##Matcher);\ + };\ + inline name##Matcher name() {\ + return name##Matcher();\ + }\ + template \ + bool name##Matcher::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P(name, p0, description)\ + template \ + class name##MatcherP {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + explicit gmock_Impl(p0##_type gmock_p0)\ + : p0(gmock_p0) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0));\ + }\ + explicit name##MatcherP(p0##_type gmock_p0) : p0(gmock_p0) {\ + }\ + p0##_type p0;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP);\ + };\ + template \ + inline name##MatcherP name(p0##_type p0) {\ + return name##MatcherP(p0);\ + }\ + template \ + template \ + bool name##MatcherP::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P2(name, p0, p1, description)\ + template \ + class name##MatcherP2 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1)\ + : p0(gmock_p0), p1(gmock_p1) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1));\ + }\ + name##MatcherP2(p0##_type gmock_p0, p1##_type gmock_p1) : p0(gmock_p0), \ + p1(gmock_p1) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP2);\ + };\ + template \ + inline name##MatcherP2 name(p0##_type p0, \ + p1##_type p1) {\ + return name##MatcherP2(p0, p1);\ + }\ + template \ + template \ + bool name##MatcherP2::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P3(name, p0, p1, p2, description)\ + template \ + class name##MatcherP3 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, \ + p2)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2));\ + }\ + name##MatcherP3(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP3);\ + };\ + template \ + inline name##MatcherP3 name(p0##_type p0, \ + p1##_type p1, p2##_type p2) {\ + return name##MatcherP3(p0, p1, p2);\ + }\ + template \ + template \ + bool name##MatcherP3::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P4(name, p0, p1, p2, p3, description)\ + template \ + class name##MatcherP4 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), p3(gmock_p3) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, p2, p3)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2, p3));\ + }\ + name##MatcherP4(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP4);\ + };\ + template \ + inline name##MatcherP4 name(p0##_type p0, p1##_type p1, p2##_type p2, \ + p3##_type p3) {\ + return name##MatcherP4(p0, \ + p1, p2, p3);\ + }\ + template \ + template \ + bool name##MatcherP4::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P5(name, p0, p1, p2, p3, p4, description)\ + template \ + class name##MatcherP5 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), \ + p4(gmock_p4) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, p2, p3, p4)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2, p3, p4));\ + }\ + name##MatcherP5(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, \ + p4##_type gmock_p4) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP5);\ + };\ + template \ + inline name##MatcherP5 name(p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4) {\ + return name##MatcherP5(p0, p1, p2, p3, p4);\ + }\ + template \ + template \ + bool name##MatcherP5::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P6(name, p0, p1, p2, p3, p4, p5, description)\ + template \ + class name##MatcherP6 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), \ + p4(gmock_p4), p5(gmock_p5) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, p2, p3, p4, p5)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2, p3, p4, p5));\ + }\ + name##MatcherP6(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP6);\ + };\ + template \ + inline name##MatcherP6 name(p0##_type p0, p1##_type p1, p2##_type p2, \ + p3##_type p3, p4##_type p4, p5##_type p5) {\ + return name##MatcherP6(p0, p1, p2, p3, p4, p5);\ + }\ + template \ + template \ + bool name##MatcherP6::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P7(name, p0, p1, p2, p3, p4, p5, p6, description)\ + template \ + class name##MatcherP7 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), \ + p4(gmock_p4), p5(gmock_p5), p6(gmock_p6) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, p2, p3, p4, p5, \ + p6)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2, p3, p4, p5, p6));\ + }\ + name##MatcherP7(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), \ + p6(gmock_p6) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP7);\ + };\ + template \ + inline name##MatcherP7 name(p0##_type p0, p1##_type p1, \ + p2##_type p2, p3##_type p3, p4##_type p4, p5##_type p5, \ + p6##_type p6) {\ + return name##MatcherP7(p0, p1, p2, p3, p4, p5, p6);\ + }\ + template \ + template \ + bool name##MatcherP7::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P8(name, p0, p1, p2, p3, p4, p5, p6, p7, description)\ + template \ + class name##MatcherP8 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), \ + p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), p7(gmock_p7) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, p2, \ + p3, p4, p5, p6, p7)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2, p3, p4, p5, p6, p7));\ + }\ + name##MatcherP8(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6, \ + p7##_type gmock_p7) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), \ + p7(gmock_p7) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP8);\ + };\ + template \ + inline name##MatcherP8 name(p0##_type p0, \ + p1##_type p1, p2##_type p2, p3##_type p3, p4##_type p4, p5##_type p5, \ + p6##_type p6, p7##_type p7) {\ + return name##MatcherP8(p0, p1, p2, p3, p4, p5, \ + p6, p7);\ + }\ + template \ + template \ + bool name##MatcherP8::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P9(name, p0, p1, p2, p3, p4, p5, p6, p7, p8, description)\ + template \ + class name##MatcherP9 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7, p8##_type gmock_p8)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), \ + p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), p7(gmock_p7), \ + p8(gmock_p8) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, p2, p3, p4, p5, p6, p7, p8)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2, p3, p4, p5, p6, p7, p8));\ + }\ + name##MatcherP9(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6, p7##_type gmock_p7, \ + p8##_type gmock_p8) : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), \ + p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), p7(gmock_p7), \ + p8(gmock_p8) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP9);\ + };\ + template \ + inline name##MatcherP9 name(p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4, p5##_type p5, p6##_type p6, p7##_type p7, \ + p8##_type p8) {\ + return name##MatcherP9(p0, p1, p2, \ + p3, p4, p5, p6, p7, p8);\ + }\ + template \ + template \ + bool name##MatcherP9::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#define MATCHER_P10(name, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, description)\ + template \ + class name##MatcherP10 {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + gmock_Impl(p0##_type gmock_p0, p1##_type gmock_p1, p2##_type gmock_p2, \ + p3##_type gmock_p3, p4##_type gmock_p4, p5##_type gmock_p5, \ + p6##_type gmock_p6, p7##_type gmock_p7, p8##_type gmock_p8, \ + p9##_type gmock_p9)\ + : p0(gmock_p0), p1(gmock_p1), p2(gmock_p2), p3(gmock_p3), \ + p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), p7(gmock_p7), \ + p8(gmock_p8), p9(gmock_p9) {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + p9##_type p9;\ + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9)));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9));\ + }\ + name##MatcherP10(p0##_type gmock_p0, p1##_type gmock_p1, \ + p2##_type gmock_p2, p3##_type gmock_p3, p4##_type gmock_p4, \ + p5##_type gmock_p5, p6##_type gmock_p6, p7##_type gmock_p7, \ + p8##_type gmock_p8, p9##_type gmock_p9) : p0(gmock_p0), p1(gmock_p1), \ + p2(gmock_p2), p3(gmock_p3), p4(gmock_p4), p5(gmock_p5), p6(gmock_p6), \ + p7(gmock_p7), p8(gmock_p8), p9(gmock_p9) {\ + }\ + p0##_type p0;\ + p1##_type p1;\ + p2##_type p2;\ + p3##_type p3;\ + p4##_type p4;\ + p5##_type p5;\ + p6##_type p6;\ + p7##_type p7;\ + p8##_type p8;\ + p9##_type p9;\ + private:\ + GTEST_DISALLOW_ASSIGN_(name##MatcherP10);\ + };\ + template \ + inline name##MatcherP10 name(p0##_type p0, p1##_type p1, p2##_type p2, p3##_type p3, \ + p4##_type p4, p5##_type p5, p6##_type p6, p7##_type p7, p8##_type p8, \ + p9##_type p9) {\ + return name##MatcherP10(p0, \ + p1, p2, p3, p4, p5, p6, p7, p8, p9);\ + }\ + template \ + template \ + bool name##MatcherP10::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_ diff --git a/googlemock/include/gmock/gmock-generated-matchers.h.pump b/googlemock/include/gmock/gmock-generated-matchers.h.pump new file mode 100644 index 0000000..de30c2c --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-matchers.h.pump @@ -0,0 +1,672 @@ +$$ -*- mode: c++; -*- +$$ This is a Pump source file. Please use Pump to convert it to +$$ gmock-generated-actions.h. +$$ +$var n = 10 $$ The maximum arity we support. +$$ }} This line fixes auto-indentation of the following code in Emacs. +// Copyright 2008, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements some commonly used variadic matchers. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_ + +#include +#include +#include +#include +#include "gmock/gmock-matchers.h" + +namespace testing { +namespace internal { + +$range i 0..n-1 + +// The type of the i-th (0-based) field of Tuple. +#define GMOCK_FIELD_TYPE_(Tuple, i) \ + typename ::testing::tuple_element::type + +// TupleFields is for selecting fields from a +// tuple of type Tuple. It has two members: +// +// type: a tuple type whose i-th field is the ki-th field of Tuple. +// GetSelectedFields(t): returns fields k0, ..., and kn of t as a tuple. +// +// For example, in class TupleFields, 2, 0>, we have: +// +// type is tuple, and +// GetSelectedFields(make_tuple(true, 'a', 42)) is (42, true). + +template +class TupleFields; + +// This generic version is used when there are $n selectors. +template +class TupleFields { + public: + typedef ::testing::tuple<$for i, [[GMOCK_FIELD_TYPE_(Tuple, k$i)]]> type; + static type GetSelectedFields(const Tuple& t) { + return type($for i, [[get(t)]]); + } +}; + +// The following specialization is used for 0 ~ $(n-1) selectors. + +$for i [[ +$$ }}} +$range j 0..i-1 +$range k 0..n-1 + +template +class TupleFields { + public: + typedef ::testing::tuple<$for j, [[GMOCK_FIELD_TYPE_(Tuple, k$j)]]> type; + static type GetSelectedFields(const Tuple& $if i==0 [[/* t */]] $else [[t]]) { + return type($for j, [[get(t)]]); + } +}; + +]] + +#undef GMOCK_FIELD_TYPE_ + +// Implements the Args() matcher. + +$var ks = [[$for i, [[k$i]]]] +template +class ArgsMatcherImpl : public MatcherInterface { + public: + // ArgsTuple may have top-level const or reference modifiers. + typedef GTEST_REMOVE_REFERENCE_AND_CONST_(ArgsTuple) RawArgsTuple; + typedef typename internal::TupleFields::type SelectedArgs; + typedef Matcher MonomorphicInnerMatcher; + + template + explicit ArgsMatcherImpl(const InnerMatcher& inner_matcher) + : inner_matcher_(SafeMatcherCast(inner_matcher)) {} + + virtual bool MatchAndExplain(ArgsTuple args, + MatchResultListener* listener) const { + const SelectedArgs& selected_args = GetSelectedArgs(args); + if (!listener->IsInterested()) + return inner_matcher_.Matches(selected_args); + + PrintIndices(listener->stream()); + *listener << "are " << PrintToString(selected_args); + + StringMatchResultListener inner_listener; + const bool match = inner_matcher_.MatchAndExplain(selected_args, + &inner_listener); + PrintIfNotEmpty(inner_listener.str(), listener->stream()); + return match; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "are a tuple "; + PrintIndices(os); + inner_matcher_.DescribeTo(os); + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "are a tuple "; + PrintIndices(os); + inner_matcher_.DescribeNegationTo(os); + } + + private: + static SelectedArgs GetSelectedArgs(ArgsTuple args) { + return TupleFields::GetSelectedFields(args); + } + + // Prints the indices of the selected fields. + static void PrintIndices(::std::ostream* os) { + *os << "whose fields ("; + const int indices[$n] = { $ks }; + for (int i = 0; i < $n; i++) { + if (indices[i] < 0) + break; + + if (i >= 1) + *os << ", "; + + *os << "#" << indices[i]; + } + *os << ") "; + } + + const MonomorphicInnerMatcher inner_matcher_; + + GTEST_DISALLOW_ASSIGN_(ArgsMatcherImpl); +}; + +template +class ArgsMatcher { + public: + explicit ArgsMatcher(const InnerMatcher& inner_matcher) + : inner_matcher_(inner_matcher) {} + + template + operator Matcher() const { + return MakeMatcher(new ArgsMatcherImpl(inner_matcher_)); + } + + private: + const InnerMatcher inner_matcher_; + + GTEST_DISALLOW_ASSIGN_(ArgsMatcher); +}; + +// A set of metafunctions for computing the result type of AllOf. +// AllOf(m1, ..., mN) returns +// AllOfResultN::type. + +// Although AllOf isn't defined for one argument, AllOfResult1 is defined +// to simplify the implementation. +template +struct AllOfResult1 { + typedef M1 type; +}; + +$range i 1..n + +$range i 2..n +$for i [[ +$range j 2..i +$var m = i/2 +$range k 1..m +$range t m+1..i + +template +struct AllOfResult$i { + typedef BothOfMatcher< + typename AllOfResult$m<$for k, [[M$k]]>::type, + typename AllOfResult$(i-m)<$for t, [[M$t]]>::type + > type; +}; + +]] + +// A set of metafunctions for computing the result type of AnyOf. +// AnyOf(m1, ..., mN) returns +// AnyOfResultN::type. + +// Although AnyOf isn't defined for one argument, AnyOfResult1 is defined +// to simplify the implementation. +template +struct AnyOfResult1 { + typedef M1 type; +}; + +$range i 1..n + +$range i 2..n +$for i [[ +$range j 2..i +$var m = i/2 +$range k 1..m +$range t m+1..i + +template +struct AnyOfResult$i { + typedef EitherOfMatcher< + typename AnyOfResult$m<$for k, [[M$k]]>::type, + typename AnyOfResult$(i-m)<$for t, [[M$t]]>::type + > type; +}; + +]] + +} // namespace internal + +// Args(a_matcher) matches a tuple if the selected +// fields of it matches a_matcher. C++ doesn't support default +// arguments for function templates, so we have to overload it. + +$range i 0..n +$for i [[ +$range j 1..i +template <$for j [[int k$j, ]]typename InnerMatcher> +inline internal::ArgsMatcher +Args(const InnerMatcher& matcher) { + return internal::ArgsMatcher(matcher); +} + + +]] +// ElementsAre(e_1, e_2, ... e_n) matches an STL-style container with +// n elements, where the i-th element in the container must +// match the i-th argument in the list. Each argument of +// ElementsAre() can be either a value or a matcher. We support up to +// $n arguments. +// +// The use of DecayArray in the implementation allows ElementsAre() +// to accept string literals, whose type is const char[N], but we +// want to treat them as const char*. +// +// NOTE: Since ElementsAre() cares about the order of the elements, it +// must not be used with containers whose elements's order is +// undefined (e.g. hash_map). + +$range i 0..n +$for i [[ + +$range j 1..i + +$if i>0 [[ + +template <$for j, [[typename T$j]]> +]] + +inline internal::ElementsAreMatcher< + ::testing::tuple< +$for j, [[ + + typename internal::DecayArray::type]]> > +ElementsAre($for j, [[const T$j& e$j]]) { + typedef ::testing::tuple< +$for j, [[ + + typename internal::DecayArray::type]]> Args; + return internal::ElementsAreMatcher(Args($for j, [[e$j]])); +} + +]] + +// UnorderedElementsAre(e_1, e_2, ..., e_n) is an ElementsAre extension +// that matches n elements in any order. We support up to n=$n arguments. + +$range i 0..n +$for i [[ + +$range j 1..i + +$if i>0 [[ + +template <$for j, [[typename T$j]]> +]] + +inline internal::UnorderedElementsAreMatcher< + ::testing::tuple< +$for j, [[ + + typename internal::DecayArray::type]]> > +UnorderedElementsAre($for j, [[const T$j& e$j]]) { + typedef ::testing::tuple< +$for j, [[ + + typename internal::DecayArray::type]]> Args; + return internal::UnorderedElementsAreMatcher(Args($for j, [[e$j]])); +} + +]] + +// AllOf(m1, m2, ..., mk) matches any value that matches all of the given +// sub-matchers. AllOf is called fully qualified to prevent ADL from firing. + +$range i 2..n +$for i [[ +$range j 1..i +$var m = i/2 +$range k 1..m +$range t m+1..i + +template <$for j, [[typename M$j]]> +inline typename internal::AllOfResult$i<$for j, [[M$j]]>::type +AllOf($for j, [[M$j m$j]]) { + return typename internal::AllOfResult$i<$for j, [[M$j]]>::type( + $if m == 1 [[m1]] $else [[::testing::AllOf($for k, [[m$k]])]], + $if m+1 == i [[m$i]] $else [[::testing::AllOf($for t, [[m$t]])]]); +} + +]] + +// AnyOf(m1, m2, ..., mk) matches any value that matches any of the given +// sub-matchers. AnyOf is called fully qualified to prevent ADL from firing. + +$range i 2..n +$for i [[ +$range j 1..i +$var m = i/2 +$range k 1..m +$range t m+1..i + +template <$for j, [[typename M$j]]> +inline typename internal::AnyOfResult$i<$for j, [[M$j]]>::type +AnyOf($for j, [[M$j m$j]]) { + return typename internal::AnyOfResult$i<$for j, [[M$j]]>::type( + $if m == 1 [[m1]] $else [[::testing::AnyOf($for k, [[m$k]])]], + $if m+1 == i [[m$i]] $else [[::testing::AnyOf($for t, [[m$t]])]]); +} + +]] + +} // namespace testing +$$ } // This Pump meta comment fixes auto-indentation in Emacs. It will not +$$ // show up in the generated code. + + +// The MATCHER* family of macros can be used in a namespace scope to +// define custom matchers easily. +// +// Basic Usage +// =========== +// +// The syntax +// +// MATCHER(name, description_string) { statements; } +// +// defines a matcher with the given name that executes the statements, +// which must return a bool to indicate if the match succeeds. Inside +// the statements, you can refer to the value being matched by 'arg', +// and refer to its type by 'arg_type'. +// +// The description string documents what the matcher does, and is used +// to generate the failure message when the match fails. Since a +// MATCHER() is usually defined in a header file shared by multiple +// C++ source files, we require the description to be a C-string +// literal to avoid possible side effects. It can be empty, in which +// case we'll use the sequence of words in the matcher name as the +// description. +// +// For example: +// +// MATCHER(IsEven, "") { return (arg % 2) == 0; } +// +// allows you to write +// +// // Expects mock_foo.Bar(n) to be called where n is even. +// EXPECT_CALL(mock_foo, Bar(IsEven())); +// +// or, +// +// // Verifies that the value of some_expression is even. +// EXPECT_THAT(some_expression, IsEven()); +// +// If the above assertion fails, it will print something like: +// +// Value of: some_expression +// Expected: is even +// Actual: 7 +// +// where the description "is even" is automatically calculated from the +// matcher name IsEven. +// +// Argument Type +// ============= +// +// Note that the type of the value being matched (arg_type) is +// determined by the context in which you use the matcher and is +// supplied to you by the compiler, so you don't need to worry about +// declaring it (nor can you). This allows the matcher to be +// polymorphic. For example, IsEven() can be used to match any type +// where the value of "(arg % 2) == 0" can be implicitly converted to +// a bool. In the "Bar(IsEven())" example above, if method Bar() +// takes an int, 'arg_type' will be int; if it takes an unsigned long, +// 'arg_type' will be unsigned long; and so on. +// +// Parameterizing Matchers +// ======================= +// +// Sometimes you'll want to parameterize the matcher. For that you +// can use another macro: +// +// MATCHER_P(name, param_name, description_string) { statements; } +// +// For example: +// +// MATCHER_P(HasAbsoluteValue, value, "") { return abs(arg) == value; } +// +// will allow you to write: +// +// EXPECT_THAT(Blah("a"), HasAbsoluteValue(n)); +// +// which may lead to this message (assuming n is 10): +// +// Value of: Blah("a") +// Expected: has absolute value 10 +// Actual: -9 +// +// Note that both the matcher description and its parameter are +// printed, making the message human-friendly. +// +// In the matcher definition body, you can write 'foo_type' to +// reference the type of a parameter named 'foo'. For example, in the +// body of MATCHER_P(HasAbsoluteValue, value) above, you can write +// 'value_type' to refer to the type of 'value'. +// +// We also provide MATCHER_P2, MATCHER_P3, ..., up to MATCHER_P$n to +// support multi-parameter matchers. +// +// Describing Parameterized Matchers +// ================================= +// +// The last argument to MATCHER*() is a string-typed expression. The +// expression can reference all of the matcher's parameters and a +// special bool-typed variable named 'negation'. When 'negation' is +// false, the expression should evaluate to the matcher's description; +// otherwise it should evaluate to the description of the negation of +// the matcher. For example, +// +// using testing::PrintToString; +// +// MATCHER_P2(InClosedRange, low, hi, +// string(negation ? "is not" : "is") + " in range [" + +// PrintToString(low) + ", " + PrintToString(hi) + "]") { +// return low <= arg && arg <= hi; +// } +// ... +// EXPECT_THAT(3, InClosedRange(4, 6)); +// EXPECT_THAT(3, Not(InClosedRange(2, 4))); +// +// would generate two failures that contain the text: +// +// Expected: is in range [4, 6] +// ... +// Expected: is not in range [2, 4] +// +// If you specify "" as the description, the failure message will +// contain the sequence of words in the matcher name followed by the +// parameter values printed as a tuple. For example, +// +// MATCHER_P2(InClosedRange, low, hi, "") { ... } +// ... +// EXPECT_THAT(3, InClosedRange(4, 6)); +// EXPECT_THAT(3, Not(InClosedRange(2, 4))); +// +// would generate two failures that contain the text: +// +// Expected: in closed range (4, 6) +// ... +// Expected: not (in closed range (2, 4)) +// +// Types of Matcher Parameters +// =========================== +// +// For the purpose of typing, you can view +// +// MATCHER_Pk(Foo, p1, ..., pk, description_string) { ... } +// +// as shorthand for +// +// template +// FooMatcherPk +// Foo(p1_type p1, ..., pk_type pk) { ... } +// +// When you write Foo(v1, ..., vk), the compiler infers the types of +// the parameters v1, ..., and vk for you. If you are not happy with +// the result of the type inference, you can specify the types by +// explicitly instantiating the template, as in Foo(5, +// false). As said earlier, you don't get to (or need to) specify +// 'arg_type' as that's determined by the context in which the matcher +// is used. You can assign the result of expression Foo(p1, ..., pk) +// to a variable of type FooMatcherPk. This +// can be useful when composing matchers. +// +// While you can instantiate a matcher template with reference types, +// passing the parameters by pointer usually makes your code more +// readable. If, however, you still want to pass a parameter by +// reference, be aware that in the failure message generated by the +// matcher you will see the value of the referenced object but not its +// address. +// +// Explaining Match Results +// ======================== +// +// Sometimes the matcher description alone isn't enough to explain why +// the match has failed or succeeded. For example, when expecting a +// long string, it can be very helpful to also print the diff between +// the expected string and the actual one. To achieve that, you can +// optionally stream additional information to a special variable +// named result_listener, whose type is a pointer to class +// MatchResultListener: +// +// MATCHER_P(EqualsLongString, str, "") { +// if (arg == str) return true; +// +// *result_listener << "the difference: " +/// << DiffStrings(str, arg); +// return false; +// } +// +// Overloading Matchers +// ==================== +// +// You can overload matchers with different numbers of parameters: +// +// MATCHER_P(Blah, a, description_string1) { ... } +// MATCHER_P2(Blah, a, b, description_string2) { ... } +// +// Caveats +// ======= +// +// When defining a new matcher, you should also consider implementing +// MatcherInterface or using MakePolymorphicMatcher(). These +// approaches require more work than the MATCHER* macros, but also +// give you more control on the types of the value being matched and +// the matcher parameters, which may leads to better compiler error +// messages when the matcher is used wrong. They also allow +// overloading matchers based on parameter types (as opposed to just +// based on the number of parameters). +// +// MATCHER*() can only be used in a namespace scope. The reason is +// that C++ doesn't yet allow function-local types to be used to +// instantiate templates. The up-coming C++0x standard will fix this. +// Once that's done, we'll consider supporting using MATCHER*() inside +// a function. +// +// More Information +// ================ +// +// To learn more about using these macros, please search for 'MATCHER' +// on http://code.google.com/p/googlemock/wiki/CookBook. + +$range i 0..n +$for i + +[[ +$var macro_name = [[$if i==0 [[MATCHER]] $elif i==1 [[MATCHER_P]] + $else [[MATCHER_P$i]]]] +$var class_name = [[name##Matcher[[$if i==0 [[]] $elif i==1 [[P]] + $else [[P$i]]]]]] +$range j 0..i-1 +$var template = [[$if i==0 [[]] $else [[ + + template <$for j, [[typename p$j##_type]]>\ +]]]] +$var ctor_param_list = [[$for j, [[p$j##_type gmock_p$j]]]] +$var impl_ctor_param_list = [[$for j, [[p$j##_type gmock_p$j]]]] +$var impl_inits = [[$if i==0 [[]] $else [[ : $for j, [[p$j(gmock_p$j)]]]]]] +$var inits = [[$if i==0 [[]] $else [[ : $for j, [[p$j(gmock_p$j)]]]]]] +$var params = [[$for j, [[p$j]]]] +$var param_types = [[$if i==0 [[]] $else [[<$for j, [[p$j##_type]]>]]]] +$var param_types_and_names = [[$for j, [[p$j##_type p$j]]]] +$var param_field_decls = [[$for j +[[ + + p$j##_type p$j;\ +]]]] +$var param_field_decls2 = [[$for j +[[ + + p$j##_type p$j;\ +]]]] + +#define $macro_name(name$for j [[, p$j]], description)\$template + class $class_name {\ + public:\ + template \ + class gmock_Impl : public ::testing::MatcherInterface {\ + public:\ + [[$if i==1 [[explicit ]]]]gmock_Impl($impl_ctor_param_list)\ + $impl_inits {}\ + virtual bool MatchAndExplain(\ + arg_type arg, ::testing::MatchResultListener* result_listener) const;\ + virtual void DescribeTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(false);\ + }\ + virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\ + *gmock_os << FormatDescription(true);\ + }\$param_field_decls + private:\ + ::testing::internal::string FormatDescription(bool negation) const {\ + const ::testing::internal::string gmock_description = (description);\ + if (!gmock_description.empty())\ + return gmock_description;\ + return ::testing::internal::FormatMatcherDescription(\ + negation, #name, \ + ::testing::internal::UniversalTersePrintTupleFieldsToStrings(\ + ::testing::tuple<$for j, [[p$j##_type]]>($for j, [[p$j]])));\ + }\ + GTEST_DISALLOW_ASSIGN_(gmock_Impl);\ + };\ + template \ + operator ::testing::Matcher() const {\ + return ::testing::Matcher(\ + new gmock_Impl($params));\ + }\ + [[$if i==1 [[explicit ]]]]$class_name($ctor_param_list)$inits {\ + }\$param_field_decls2 + private:\ + GTEST_DISALLOW_ASSIGN_($class_name);\ + };\$template + inline $class_name$param_types name($param_types_and_names) {\ + return $class_name$param_types($params);\ + }\$template + template \ + bool $class_name$param_types::gmock_Impl::MatchAndExplain(\ + arg_type arg, \ + ::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\ + const +]] + + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_ diff --git a/googlemock/include/gmock/gmock-generated-nice-strict.h b/googlemock/include/gmock/gmock-generated-nice-strict.h new file mode 100644 index 0000000..4095f4d --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-nice-strict.h @@ -0,0 +1,397 @@ +// This file was GENERATED by command: +// pump.py gmock-generated-nice-strict.h.pump +// DO NOT EDIT BY HAND!!! + +// Copyright 2008, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Implements class templates NiceMock, NaggyMock, and StrictMock. +// +// Given a mock class MockFoo that is created using Google Mock, +// NiceMock is a subclass of MockFoo that allows +// uninteresting calls (i.e. calls to mock methods that have no +// EXPECT_CALL specs), NaggyMock is a subclass of MockFoo +// that prints a warning when an uninteresting call occurs, and +// StrictMock is a subclass of MockFoo that treats all +// uninteresting calls as errors. +// +// Currently a mock is naggy by default, so MockFoo and +// NaggyMock behave like the same. However, we will soon +// switch the default behavior of mocks to be nice, as that in general +// leads to more maintainable tests. When that happens, MockFoo will +// stop behaving like NaggyMock and start behaving like +// NiceMock. +// +// NiceMock, NaggyMock, and StrictMock "inherit" the constructors of +// their respective base class, with up-to 10 arguments. Therefore +// you can write NiceMock(5, "a") to construct a nice mock +// where MockFoo has a constructor that accepts (int, const char*), +// for example. +// +// A known limitation is that NiceMock, NaggyMock, +// and StrictMock only works for mock methods defined using +// the MOCK_METHOD* family of macros DIRECTLY in the MockFoo class. +// If a mock method is defined in a base class of MockFoo, the "nice" +// or "strict" modifier may not affect it, depending on the compiler. +// In particular, nesting NiceMock, NaggyMock, and StrictMock is NOT +// supported. +// +// Another known limitation is that the constructors of the base mock +// cannot have arguments passed by non-const reference, which are +// banned by the Google C++ style guide anyway. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_NICE_STRICT_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_NICE_STRICT_H_ + +#include "gmock/gmock-spec-builders.h" +#include "gmock/internal/gmock-port.h" + +namespace testing { + +template +class NiceMock : public MockClass { + public: + // We don't factor out the constructor body to a common method, as + // we have to avoid a possible clash with members of MockClass. + NiceMock() { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + // C++ doesn't (yet) allow inheritance of constructors, so we have + // to define it for each arity. + template + explicit NiceMock(const A1& a1) : MockClass(a1) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + template + NiceMock(const A1& a1, const A2& a2) : MockClass(a1, a2) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3) : MockClass(a1, a2, a3) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3, + const A4& a4) : MockClass(a1, a2, a3, a4) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5) : MockClass(a1, a2, a3, a4, a5) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6) : MockClass(a1, a2, a3, a4, a5, a6) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7) : MockClass(a1, a2, a3, a4, a5, + a6, a7) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8) : MockClass(a1, + a2, a3, a4, a5, a6, a7, a8) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8, + const A9& a9) : MockClass(a1, a2, a3, a4, a5, a6, a7, a8, a9) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NiceMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8, const A9& a9, + const A10& a10) : MockClass(a1, a2, a3, a4, a5, a6, a7, a8, a9, a10) { + ::testing::Mock::AllowUninterestingCalls( + internal::ImplicitCast_(this)); + } + + virtual ~NiceMock() { + ::testing::Mock::UnregisterCallReaction( + internal::ImplicitCast_(this)); + } + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(NiceMock); +}; + +template +class NaggyMock : public MockClass { + public: + // We don't factor out the constructor body to a common method, as + // we have to avoid a possible clash with members of MockClass. + NaggyMock() { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + // C++ doesn't (yet) allow inheritance of constructors, so we have + // to define it for each arity. + template + explicit NaggyMock(const A1& a1) : MockClass(a1) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + template + NaggyMock(const A1& a1, const A2& a2) : MockClass(a1, a2) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3) : MockClass(a1, a2, a3) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3, + const A4& a4) : MockClass(a1, a2, a3, a4) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5) : MockClass(a1, a2, a3, a4, a5) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6) : MockClass(a1, a2, a3, a4, a5, a6) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7) : MockClass(a1, a2, a3, a4, a5, + a6, a7) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8) : MockClass(a1, + a2, a3, a4, a5, a6, a7, a8) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8, + const A9& a9) : MockClass(a1, a2, a3, a4, a5, a6, a7, a8, a9) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + NaggyMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8, const A9& a9, + const A10& a10) : MockClass(a1, a2, a3, a4, a5, a6, a7, a8, a9, a10) { + ::testing::Mock::WarnUninterestingCalls( + internal::ImplicitCast_(this)); + } + + virtual ~NaggyMock() { + ::testing::Mock::UnregisterCallReaction( + internal::ImplicitCast_(this)); + } + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(NaggyMock); +}; + +template +class StrictMock : public MockClass { + public: + // We don't factor out the constructor body to a common method, as + // we have to avoid a possible clash with members of MockClass. + StrictMock() { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + // C++ doesn't (yet) allow inheritance of constructors, so we have + // to define it for each arity. + template + explicit StrictMock(const A1& a1) : MockClass(a1) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + template + StrictMock(const A1& a1, const A2& a2) : MockClass(a1, a2) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3) : MockClass(a1, a2, a3) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3, + const A4& a4) : MockClass(a1, a2, a3, a4) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5) : MockClass(a1, a2, a3, a4, a5) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6) : MockClass(a1, a2, a3, a4, a5, a6) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7) : MockClass(a1, a2, a3, a4, a5, + a6, a7) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8) : MockClass(a1, + a2, a3, a4, a5, a6, a7, a8) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8, + const A9& a9) : MockClass(a1, a2, a3, a4, a5, a6, a7, a8, a9) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + template + StrictMock(const A1& a1, const A2& a2, const A3& a3, const A4& a4, + const A5& a5, const A6& a6, const A7& a7, const A8& a8, const A9& a9, + const A10& a10) : MockClass(a1, a2, a3, a4, a5, a6, a7, a8, a9, a10) { + ::testing::Mock::FailUninterestingCalls( + internal::ImplicitCast_(this)); + } + + virtual ~StrictMock() { + ::testing::Mock::UnregisterCallReaction( + internal::ImplicitCast_(this)); + } + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(StrictMock); +}; + +// The following specializations catch some (relatively more common) +// user errors of nesting nice and strict mocks. They do NOT catch +// all possible errors. + +// These specializations are declared but not defined, as NiceMock, +// NaggyMock, and StrictMock cannot be nested. + +template +class NiceMock >; +template +class NiceMock >; +template +class NiceMock >; + +template +class NaggyMock >; +template +class NaggyMock >; +template +class NaggyMock >; + +template +class StrictMock >; +template +class StrictMock >; +template +class StrictMock >; + +} // namespace testing + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_NICE_STRICT_H_ diff --git a/googlemock/include/gmock/gmock-generated-nice-strict.h.pump b/googlemock/include/gmock/gmock-generated-nice-strict.h.pump new file mode 100644 index 0000000..3ee1ce7 --- /dev/null +++ b/googlemock/include/gmock/gmock-generated-nice-strict.h.pump @@ -0,0 +1,161 @@ +$$ -*- mode: c++; -*- +$$ This is a Pump source file. Please use Pump to convert it to +$$ gmock-generated-nice-strict.h. +$$ +$var n = 10 $$ The maximum arity we support. +// Copyright 2008, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Implements class templates NiceMock, NaggyMock, and StrictMock. +// +// Given a mock class MockFoo that is created using Google Mock, +// NiceMock is a subclass of MockFoo that allows +// uninteresting calls (i.e. calls to mock methods that have no +// EXPECT_CALL specs), NaggyMock is a subclass of MockFoo +// that prints a warning when an uninteresting call occurs, and +// StrictMock is a subclass of MockFoo that treats all +// uninteresting calls as errors. +// +// Currently a mock is naggy by default, so MockFoo and +// NaggyMock behave like the same. However, we will soon +// switch the default behavior of mocks to be nice, as that in general +// leads to more maintainable tests. When that happens, MockFoo will +// stop behaving like NaggyMock and start behaving like +// NiceMock. +// +// NiceMock, NaggyMock, and StrictMock "inherit" the constructors of +// their respective base class, with up-to $n arguments. Therefore +// you can write NiceMock(5, "a") to construct a nice mock +// where MockFoo has a constructor that accepts (int, const char*), +// for example. +// +// A known limitation is that NiceMock, NaggyMock, +// and StrictMock only works for mock methods defined using +// the MOCK_METHOD* family of macros DIRECTLY in the MockFoo class. +// If a mock method is defined in a base class of MockFoo, the "nice" +// or "strict" modifier may not affect it, depending on the compiler. +// In particular, nesting NiceMock, NaggyMock, and StrictMock is NOT +// supported. +// +// Another known limitation is that the constructors of the base mock +// cannot have arguments passed by non-const reference, which are +// banned by the Google C++ style guide anyway. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_NICE_STRICT_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_NICE_STRICT_H_ + +#include "gmock/gmock-spec-builders.h" +#include "gmock/internal/gmock-port.h" + +namespace testing { + +$range kind 0..2 +$for kind [[ + +$var clazz=[[$if kind==0 [[NiceMock]] + $elif kind==1 [[NaggyMock]] + $else [[StrictMock]]]] + +$var method=[[$if kind==0 [[AllowUninterestingCalls]] + $elif kind==1 [[WarnUninterestingCalls]] + $else [[FailUninterestingCalls]]]] + +template +class $clazz : public MockClass { + public: + // We don't factor out the constructor body to a common method, as + // we have to avoid a possible clash with members of MockClass. + $clazz() { + ::testing::Mock::$method( + internal::ImplicitCast_(this)); + } + + // C++ doesn't (yet) allow inheritance of constructors, so we have + // to define it for each arity. + template + explicit $clazz(const A1& a1) : MockClass(a1) { + ::testing::Mock::$method( + internal::ImplicitCast_(this)); + } + +$range i 2..n +$for i [[ +$range j 1..i + template <$for j, [[typename A$j]]> + $clazz($for j, [[const A$j& a$j]]) : MockClass($for j, [[a$j]]) { + ::testing::Mock::$method( + internal::ImplicitCast_(this)); + } + + +]] + virtual ~$clazz() { + ::testing::Mock::UnregisterCallReaction( + internal::ImplicitCast_(this)); + } + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_($clazz); +}; + +]] + +// The following specializations catch some (relatively more common) +// user errors of nesting nice and strict mocks. They do NOT catch +// all possible errors. + +// These specializations are declared but not defined, as NiceMock, +// NaggyMock, and StrictMock cannot be nested. + +template +class NiceMock >; +template +class NiceMock >; +template +class NiceMock >; + +template +class NaggyMock >; +template +class NaggyMock >; +template +class NaggyMock >; + +template +class StrictMock >; +template +class StrictMock >; +template +class StrictMock >; + +} // namespace testing + +#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_NICE_STRICT_H_ diff --git a/googlemock/include/gmock/gmock-matchers.h b/googlemock/include/gmock/gmock-matchers.h new file mode 100644 index 0000000..33b37a7 --- /dev/null +++ b/googlemock/include/gmock/gmock-matchers.h @@ -0,0 +1,4399 @@ +// Copyright 2007, Google Inc. +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Author: wan@google.com (Zhanyong Wan) + +// Google Mock - a framework for writing C++ mock classes. +// +// This file implements some commonly used argument matchers. More +// matchers can be defined by the user implementing the +// MatcherInterface interface if necessary. + +#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_MATCHERS_H_ +#define GMOCK_INCLUDE_GMOCK_GMOCK_MATCHERS_H_ + +#include +#include +#include +#include +#include // NOLINT +#include +#include +#include +#include + +#include "gmock/internal/gmock-internal-utils.h" +#include "gmock/internal/gmock-port.h" +#include "gtest/gtest.h" + +#if GTEST_HAS_STD_INITIALIZER_LIST_ +# include // NOLINT -- must be after gtest.h +#endif + +namespace testing { + +// To implement a matcher Foo for type T, define: +// 1. a class FooMatcherImpl that implements the +// MatcherInterface interface, and +// 2. a factory function that creates a Matcher object from a +// FooMatcherImpl*. +// +// The two-level delegation design makes it possible to allow a user +// to write "v" instead of "Eq(v)" where a Matcher is expected, which +// is impossible if we pass matchers by pointers. It also eases +// ownership management as Matcher objects can now be copied like +// plain values. + +// MatchResultListener is an abstract class. Its << operator can be +// used by a matcher to explain why a value matches or doesn't match. +// +// TODO(wan@google.com): add method +// bool InterestedInWhy(bool result) const; +// to indicate whether the listener is interested in why the match +// result is 'result'. +class MatchResultListener { + public: + // Creates a listener object with the given underlying ostream. The + // listener does not own the ostream, and does not dereference it + // in the constructor or destructor. + explicit MatchResultListener(::std::ostream* os) : stream_(os) {} + virtual ~MatchResultListener() = 0; // Makes this class abstract. + + // Streams x to the underlying ostream; does nothing if the ostream + // is NULL. + template + MatchResultListener& operator<<(const T& x) { + if (stream_ != NULL) + *stream_ << x; + return *this; + } + + // Returns the underlying ostream. + ::std::ostream* stream() { return stream_; } + + // Returns true iff the listener is interested in an explanation of + // the match result. A matcher's MatchAndExplain() method can use + // this information to avoid generating the explanation when no one + // intends to hear it. + bool IsInterested() const { return stream_ != NULL; } + + private: + ::std::ostream* const stream_; + + GTEST_DISALLOW_COPY_AND_ASSIGN_(MatchResultListener); +}; + +inline MatchResultListener::~MatchResultListener() { +} + +// An instance of a subclass of this knows how to describe itself as a +// matcher. +class MatcherDescriberInterface { + public: + virtual ~MatcherDescriberInterface() {} + + // Describes this matcher to an ostream. The function should print + // a verb phrase that describes the property a value matching this + // matcher should have. The subject of the verb phrase is the value + // being matched. For example, the DescribeTo() method of the Gt(7) + // matcher prints "is greater than 7". + virtual void DescribeTo(::std::ostream* os) const = 0; + + // Describes the negation of this matcher to an ostream. For + // example, if the description of this matcher is "is greater than + // 7", the negated description could be "is not greater than 7". + // You are not required to override this when implementing + // MatcherInterface, but it is highly advised so that your matcher + // can produce good error messages. + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "not ("; + DescribeTo(os); + *os << ")"; + } +}; + +// The implementation of a matcher. +template +class MatcherInterface : public MatcherDescriberInterface { + public: + // Returns true iff the matcher matches x; also explains the match + // result to 'listener' if necessary (see the next paragraph), in + // the form of a non-restrictive relative clause ("which ...", + // "whose ...", etc) that describes x. For example, the + // MatchAndExplain() method of the Pointee(...) matcher should + // generate an explanation like "which points to ...". + // + // Implementations of MatchAndExplain() should add an explanation of + // the match result *if and only if* they can provide additional + // information that's not already present (or not obvious) in the + // print-out of x and the matcher's description. Whether the match + // succeeds is not a factor in deciding whether an explanation is + // needed, as sometimes the caller needs to print a failure message + // when the match succeeds (e.g. when the matcher is used inside + // Not()). + // + // For example, a "has at least 10 elements" matcher should explain + // what the actual element count is, regardless of the match result, + // as it is useful information to the reader; on the other hand, an + // "is empty" matcher probably only needs to explain what the actual + // size is when the match fails, as it's redundant to say that the + // size is 0 when the value is already known to be empty. + // + // You should override this method when defining a new matcher. + // + // It's the responsibility of the caller (Google Mock) to guarantee + // that 'listener' is not NULL. This helps to simplify a matcher's + // implementation when it doesn't care about the performance, as it + // can talk to 'listener' without checking its validity first. + // However, in order to implement dummy listeners efficiently, + // listener->stream() may be NULL. + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const = 0; + + // Inherits these methods from MatcherDescriberInterface: + // virtual void DescribeTo(::std::ostream* os) const = 0; + // virtual void DescribeNegationTo(::std::ostream* os) const; +}; + +// A match result listener that stores the explanation in a string. +class StringMatchResultListener : public MatchResultListener { + public: + StringMatchResultListener() : MatchResultListener(&ss_) {} + + // Returns the explanation accumulated so far. + internal::string str() const { return ss_.str(); } + + // Clears the explanation accumulated so far. + void Clear() { ss_.str(""); } + + private: + ::std::stringstream ss_; + + GTEST_DISALLOW_COPY_AND_ASSIGN_(StringMatchResultListener); +}; + +namespace internal { + +struct AnyEq { + template + bool operator()(const A& a, const B& b) const { return a == b; } +}; +struct AnyNe { + template + bool operator()(const A& a, const B& b) const { return a != b; } +}; +struct AnyLt { + template + bool operator()(const A& a, const B& b) const { return a < b; } +}; +struct AnyGt { + template + bool operator()(const A& a, const B& b) const { return a > b; } +}; +struct AnyLe { + template + bool operator()(const A& a, const B& b) const { return a <= b; } +}; +struct AnyGe { + template + bool operator()(const A& a, const B& b) const { return a >= b; } +}; + +// A match result listener that ignores the explanation. +class DummyMatchResultListener : public MatchResultListener { + public: + DummyMatchResultListener() : MatchResultListener(NULL) {} + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(DummyMatchResultListener); +}; + +// A match result listener that forwards the explanation to a given +// ostream. The difference between this and MatchResultListener is +// that the former is concrete. +class StreamMatchResultListener : public MatchResultListener { + public: + explicit StreamMatchResultListener(::std::ostream* os) + : MatchResultListener(os) {} + + private: + GTEST_DISALLOW_COPY_AND_ASSIGN_(StreamMatchResultListener); +}; + +// An internal class for implementing Matcher, which will derive +// from it. We put functionalities common to all Matcher +// specializations here to avoid code duplication. +template +class MatcherBase { + public: + // Returns true iff the matcher matches x; also explains the match + // result to 'listener'. + bool MatchAndExplain(T x, MatchResultListener* listener) const { + return impl_->MatchAndExplain(x, listener); + } + + // Returns true iff this matcher matches x. + bool Matches(T x) const { + DummyMatchResultListener dummy; + return MatchAndExplain(x, &dummy); + } + + // Describes this matcher to an ostream. + void DescribeTo(::std::ostream* os) const { impl_->DescribeTo(os); } + + // Describes the negation of this matcher to an ostream. + void DescribeNegationTo(::std::ostream* os) const { + impl_->DescribeNegationTo(os); + } + + // Explains why x matches, or doesn't match, the matcher. + void ExplainMatchResultTo(T x, ::std::ostream* os) const { + StreamMatchResultListener listener(os); + MatchAndExplain(x, &listener); + } + + // Returns the describer for this matcher object; retains ownership + // of the describer, which is only guaranteed to be alive when + // this matcher object is alive. + const MatcherDescriberInterface* GetDescriber() const { + return impl_.get(); + } + + protected: + MatcherBase() {} + + // Constructs a matcher from its implementation. + explicit MatcherBase(const MatcherInterface* impl) + : impl_(impl) {} + + virtual ~MatcherBase() {} + + private: + // shared_ptr (util/gtl/shared_ptr.h) and linked_ptr have similar + // interfaces. The former dynamically allocates a chunk of memory + // to hold the reference count, while the latter tracks all + // references using a circular linked list without allocating + // memory. It has been observed that linked_ptr performs better in + // typical scenarios. However, shared_ptr can out-perform + // linked_ptr when there are many more uses of the copy constructor + // than the default constructor. + // + // If performance becomes a problem, we should see if using + // shared_ptr helps. + ::testing::internal::linked_ptr > impl_; +}; + +} // namespace internal + +// A Matcher is a copyable and IMMUTABLE (except by assignment) +// object that can check whether a value of type T matches. The +// implementation of Matcher is just a linked_ptr to const +// MatcherInterface, so copying is fairly cheap. Don't inherit +// from Matcher! +template +class Matcher : public internal::MatcherBase { + public: + // Constructs a null matcher. Needed for storing Matcher objects in STL + // containers. A default-constructed matcher is not yet initialized. You + // cannot use it until a valid value has been assigned to it. + explicit Matcher() {} // NOLINT + + // Constructs a matcher from its implementation. + explicit Matcher(const MatcherInterface* impl) + : internal::MatcherBase(impl) {} + + // Implicit constructor here allows people to write + // EXPECT_CALL(foo, Bar(5)) instead of EXPECT_CALL(foo, Bar(Eq(5))) sometimes + Matcher(T value); // NOLINT +}; + +// The following two specializations allow the user to write str +// instead of Eq(str) and "foo" instead of Eq("foo") when a string +// matcher is expected. +template <> +class GTEST_API_ Matcher + : public internal::MatcherBase { + public: + Matcher() {} + + explicit Matcher(const MatcherInterface* impl) + : internal::MatcherBase(impl) {} + + // Allows the user to write str instead of Eq(str) sometimes, where + // str is a string object. + Matcher(const internal::string& s); // NOLINT + + // Allows the user to write "foo" instead of Eq("foo") sometimes. + Matcher(const char* s); // NOLINT +}; + +template <> +class GTEST_API_ Matcher + : public internal::MatcherBase { + public: + Matcher() {} + + explicit Matcher(const MatcherInterface* impl) + : internal::MatcherBase(impl) {} + + // Allows the user to write str instead of Eq(str) sometimes, where + // str is a string object. + Matcher(const internal::string& s); // NOLINT + + // Allows the user to write "foo" instead of Eq("foo") sometimes. + Matcher(const char* s); // NOLINT +}; + +#if GTEST_HAS_STRING_PIECE_ +// The following two specializations allow the user to write str +// instead of Eq(str) and "foo" instead of Eq("foo") when a StringPiece +// matcher is expected. +template <> +class GTEST_API_ Matcher + : public internal::MatcherBase { + public: + Matcher() {} + + explicit Matcher(const MatcherInterface* impl) + : internal::MatcherBase(impl) {} + + // Allows the user to write str instead of Eq(str) sometimes, where + // str is a string object. + Matcher(const internal::string& s); // NOLINT + + // Allows the user to write "foo" instead of Eq("foo") sometimes. + Matcher(const char* s); // NOLINT + + // Allows the user to pass StringPieces directly. + Matcher(StringPiece s); // NOLINT +}; + +template <> +class GTEST_API_ Matcher + : public internal::MatcherBase { + public: + Matcher() {} + + explicit Matcher(const MatcherInterface* impl) + : internal::MatcherBase(impl) {} + + // Allows the user to write str instead of Eq(str) sometimes, where + // str is a string object. + Matcher(const internal::string& s); // NOLINT + + // Allows the user to write "foo" instead of Eq("foo") sometimes. + Matcher(const char* s); // NOLINT + + // Allows the user to pass StringPieces directly. + Matcher(StringPiece s); // NOLINT +}; +#endif // GTEST_HAS_STRING_PIECE_ + +// The PolymorphicMatcher class template makes it easy to implement a +// polymorphic matcher (i.e. a matcher that can match values of more +// than one type, e.g. Eq(n) and NotNull()). +// +// To define a polymorphic matcher, a user should provide an Impl +// class that has a DescribeTo() method and a DescribeNegationTo() +// method, and define a member function (or member function template) +// +// bool MatchAndExplain(const Value& value, +// MatchResultListener* listener) const; +// +// See the definition of NotNull() for a complete example. +template +class PolymorphicMatcher { + public: + explicit PolymorphicMatcher(const Impl& an_impl) : impl_(an_impl) {} + + // Returns a mutable reference to the underlying matcher + // implementation object. + Impl& mutable_impl() { return impl_; } + + // Returns an immutable reference to the underlying matcher + // implementation object. + const Impl& impl() const { return impl_; } + + template + operator Matcher() const { + return Matcher(new MonomorphicImpl(impl_)); + } + + private: + template + class MonomorphicImpl : public MatcherInterface { + public: + explicit MonomorphicImpl(const Impl& impl) : impl_(impl) {} + + virtual void DescribeTo(::std::ostream* os) const { + impl_.DescribeTo(os); + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + impl_.DescribeNegationTo(os); + } + + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const { + return impl_.MatchAndExplain(x, listener); + } + + private: + const Impl impl_; + + GTEST_DISALLOW_ASSIGN_(MonomorphicImpl); + }; + + Impl impl_; + + GTEST_DISALLOW_ASSIGN_(PolymorphicMatcher); +}; + +// Creates a matcher from its implementation. This is easier to use +// than the Matcher constructor as it doesn't require you to +// explicitly write the template argument, e.g. +// +// MakeMatcher(foo); +// vs +// Matcher(foo); +template +inline Matcher MakeMatcher(const MatcherInterface* impl) { + return Matcher(impl); +} + +// Creates a polymorphic matcher from its implementation. This is +// easier to use than the PolymorphicMatcher constructor as it +// doesn't require you to explicitly write the template argument, e.g. +// +// MakePolymorphicMatcher(foo); +// vs +// PolymorphicMatcher(foo); +template +inline PolymorphicMatcher MakePolymorphicMatcher(const Impl& impl) { + return PolymorphicMatcher(impl); +} + +// Anything inside the 'internal' namespace IS INTERNAL IMPLEMENTATION +// and MUST NOT BE USED IN USER CODE!!! +namespace internal { + +// The MatcherCastImpl class template is a helper for implementing +// MatcherCast(). We need this helper in order to partially +// specialize the implementation of MatcherCast() (C++ allows +// class/struct templates to be partially specialized, but not +// function templates.). + +// This general version is used when MatcherCast()'s argument is a +// polymorphic matcher (i.e. something that can be converted to a +// Matcher but is not one yet; for example, Eq(value)) or a value (for +// example, "hello"). +template +class MatcherCastImpl { + public: + static Matcher Cast(const M& polymorphic_matcher_or_value) { + // M can be a polymorhic matcher, in which case we want to use + // its conversion operator to create Matcher. Or it can be a value + // that should be passed to the Matcher's constructor. + // + // We can't call Matcher(polymorphic_matcher_or_value) when M is a + // polymorphic matcher because it'll be ambiguous if T has an implicit + // constructor from M (this usually happens when T has an implicit + // constructor from any type). + // + // It won't work to unconditionally implict_cast + // polymorphic_matcher_or_value to Matcher because it won't trigger + // a user-defined conversion from M to T if one exists (assuming M is + // a value). + return CastImpl( + polymorphic_matcher_or_value, + BooleanConstant< + internal::ImplicitlyConvertible >::value>()); + } + + private: + static Matcher CastImpl(const M& value, BooleanConstant) { + // M can't be implicitly converted to Matcher, so M isn't a polymorphic + // matcher. It must be a value then. Use direct initialization to create + // a matcher. + return Matcher(ImplicitCast_(value)); + } + + static Matcher CastImpl(const M& polymorphic_matcher_or_value, + BooleanConstant) { + // M is implicitly convertible to Matcher, which means that either + // M is a polymorhpic matcher or Matcher has an implicit constructor + // from M. In both cases using the implicit conversion will produce a + // matcher. + // + // Even if T has an implicit constructor from M, it won't be called because + // creating Matcher would require a chain of two user-defined conversions + // (first to create T from M and then to create Matcher from T). + return polymorphic_matcher_or_value; + } +}; + +// This more specialized version is used when MatcherCast()'s argument +// is already a Matcher. This only compiles when type T can be +// statically converted to type U. +template +class MatcherCastImpl > { + public: + static Matcher Cast(const Matcher& source_matcher) { + return Matcher(new Impl(source_matcher)); + } + + private: + class Impl : public MatcherInterface { + public: + explicit Impl(const Matcher& source_matcher) + : source_matcher_(source_matcher) {} + + // We delegate the matching logic to the source matcher. + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const { + return source_matcher_.MatchAndExplain(static_cast(x), listener); + } + + virtual void DescribeTo(::std::ostream* os) const { + source_matcher_.DescribeTo(os); + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + source_matcher_.DescribeNegationTo(os); + } + + private: + const Matcher source_matcher_; + + GTEST_DISALLOW_ASSIGN_(Impl); + }; +}; + +// This even more specialized version is used for efficiently casting +// a matcher to its own type. +template +class MatcherCastImpl > { + public: + static Matcher Cast(const Matcher& matcher) { return matcher; } +}; + +} // namespace internal + +// In order to be safe and clear, casting between different matcher +// types is done explicitly via MatcherCast(m), which takes a +// matcher m and returns a Matcher. It compiles only when T can be +// statically converted to the argument type of m. +template +inline Matcher MatcherCast(const M& matcher) { + return internal::MatcherCastImpl::Cast(matcher); +} + +// Implements SafeMatcherCast(). +// +// We use an intermediate class to do the actual safe casting as Nokia's +// Symbian compiler cannot decide between +// template ... (M) and +// template ... (const Matcher&) +// for function templates but can for member function templates. +template +class SafeMatcherCastImpl { + public: + // This overload handles polymorphic matchers and values only since + // monomorphic matchers are handled by the next one. + template + static inline Matcher Cast(const M& polymorphic_matcher_or_value) { + return internal::MatcherCastImpl::Cast(polymorphic_matcher_or_value); + } + + // This overload handles monomorphic matchers. + // + // In general, if type T can be implicitly converted to type U, we can + // safely convert a Matcher to a Matcher (i.e. Matcher is + // contravariant): just keep a copy of the original Matcher, convert the + // argument from type T to U, and then pass it to the underlying Matcher. + // The only exception is when U is a reference and T is not, as the + // underlying Matcher may be interested in the argument's address, which + // is not preserved in the conversion from T to U. + template + static inline Matcher Cast(const Matcher& matcher) { + // Enforce that T can be implicitly converted to U. + GTEST_COMPILE_ASSERT_((internal::ImplicitlyConvertible::value), + T_must_be_implicitly_convertible_to_U); + // Enforce that we are not converting a non-reference type T to a reference + // type U. + GTEST_COMPILE_ASSERT_( + internal::is_reference::value || !internal::is_reference::value, + cannot_convert_non_referentce_arg_to_reference); + // In case both T and U are arithmetic types, enforce that the + // conversion is not lossy. + typedef GTEST_REMOVE_REFERENCE_AND_CONST_(T) RawT; + typedef GTEST_REMOVE_REFERENCE_AND_CONST_(U) RawU; + const bool kTIsOther = GMOCK_KIND_OF_(RawT) == internal::kOther; + const bool kUIsOther = GMOCK_KIND_OF_(RawU) == internal::kOther; + GTEST_COMPILE_ASSERT_( + kTIsOther || kUIsOther || + (internal::LosslessArithmeticConvertible::value), + conversion_of_arithmetic_types_must_be_lossless); + return MatcherCast(matcher); + } +}; + +template +inline Matcher SafeMatcherCast(const M& polymorphic_matcher) { + return SafeMatcherCastImpl::Cast(polymorphic_matcher); +} + +// A() returns a matcher that matches any value of type T. +template +Matcher A(); + +// Anything inside the 'internal' namespace IS INTERNAL IMPLEMENTATION +// and MUST NOT BE USED IN USER CODE!!! +namespace internal { + +// If the explanation is not empty, prints it to the ostream. +inline void PrintIfNotEmpty(const internal::string& explanation, + ::std::ostream* os) { + if (explanation != "" && os != NULL) { + *os << ", " << explanation; + } +} + +// Returns true if the given type name is easy to read by a human. +// This is used to decide whether printing the type of a value might +// be helpful. +inline bool IsReadableTypeName(const string& type_name) { + // We consider a type name readable if it's short or doesn't contain + // a template or function type. + return (type_name.length() <= 20 || + type_name.find_first_of("<(") == string::npos); +} + +// Matches the value against the given matcher, prints the value and explains +// the match result to the listener. Returns the match result. +// 'listener' must not be NULL. +// Value cannot be passed by const reference, because some matchers take a +// non-const argument. +template +bool MatchPrintAndExplain(Value& value, const Matcher& matcher, + MatchResultListener* listener) { + if (!listener->IsInterested()) { + // If the listener is not interested, we do not need to construct the + // inner explanation. + return matcher.Matches(value); + } + + StringMatchResultListener inner_listener; + const bool match = matcher.MatchAndExplain(value, &inner_listener); + + UniversalPrint(value, listener->stream()); +#if GTEST_HAS_RTTI + const string& type_name = GetTypeName(); + if (IsReadableTypeName(type_name)) + *listener->stream() << " (of type " << type_name << ")"; +#endif + PrintIfNotEmpty(inner_listener.str(), listener->stream()); + + return match; +} + +// An internal helper class for doing compile-time loop on a tuple's +// fields. +template +class TuplePrefix { + public: + // TuplePrefix::Matches(matcher_tuple, value_tuple) returns true + // iff the first N fields of matcher_tuple matches the first N + // fields of value_tuple, respectively. + template + static bool Matches(const MatcherTuple& matcher_tuple, + const ValueTuple& value_tuple) { + return TuplePrefix::Matches(matcher_tuple, value_tuple) + && get(matcher_tuple).Matches(get(value_tuple)); + } + + // TuplePrefix::ExplainMatchFailuresTo(matchers, values, os) + // describes failures in matching the first N fields of matchers + // against the first N fields of values. If there is no failure, + // nothing will be streamed to os. + template + static void ExplainMatchFailuresTo(const MatcherTuple& matchers, + const ValueTuple& values, + ::std::ostream* os) { + // First, describes failures in the first N - 1 fields. + TuplePrefix::ExplainMatchFailuresTo(matchers, values, os); + + // Then describes the failure (if any) in the (N - 1)-th (0-based) + // field. + typename tuple_element::type matcher = + get(matchers); + typedef typename tuple_element::type Value; + Value value = get(values); + StringMatchResultListener listener; + if (!matcher.MatchAndExplain(value, &listener)) { + // TODO(wan): include in the message the name of the parameter + // as used in MOCK_METHOD*() when possible. + *os << " Expected arg #" << N - 1 << ": "; + get(matchers).DescribeTo(os); + *os << "\n Actual: "; + // We remove the reference in type Value to prevent the + // universal printer from printing the address of value, which + // isn't interesting to the user most of the time. The + // matcher's MatchAndExplain() method handles the case when + // the address is interesting. + internal::UniversalPrint(value, os); + PrintIfNotEmpty(listener.str(), os); + *os << "\n"; + } + } +}; + +// The base case. +template <> +class TuplePrefix<0> { + public: + template + static bool Matches(const MatcherTuple& /* matcher_tuple */, + const ValueTuple& /* value_tuple */) { + return true; + } + + template + static void ExplainMatchFailuresTo(const MatcherTuple& /* matchers */, + const ValueTuple& /* values */, + ::std::ostream* /* os */) {} +}; + +// TupleMatches(matcher_tuple, value_tuple) returns true iff all +// matchers in matcher_tuple match the corresponding fields in +// value_tuple. It is a compiler error if matcher_tuple and +// value_tuple have different number of fields or incompatible field +// types. +template +bool TupleMatches(const MatcherTuple& matcher_tuple, + const ValueTuple& value_tuple) { + // Makes sure that matcher_tuple and value_tuple have the same + // number of fields. + GTEST_COMPILE_ASSERT_(tuple_size::value == + tuple_size::value, + matcher_and_value_have_different_numbers_of_fields); + return TuplePrefix::value>:: + Matches(matcher_tuple, value_tuple); +} + +// Describes failures in matching matchers against values. If there +// is no failure, nothing will be streamed to os. +template +void ExplainMatchFailureTupleTo(const MatcherTuple& matchers, + const ValueTuple& values, + ::std::ostream* os) { + TuplePrefix::value>::ExplainMatchFailuresTo( + matchers, values, os); +} + +// TransformTupleValues and its helper. +// +// TransformTupleValuesHelper hides the internal machinery that +// TransformTupleValues uses to implement a tuple traversal. +template +class TransformTupleValuesHelper { + private: + typedef ::testing::tuple_size TupleSize; + + public: + // For each member of tuple 't', taken in order, evaluates '*out++ = f(t)'. + // Returns the final value of 'out' in case the caller needs it. + static OutIter Run(Func f, const Tuple& t, OutIter out) { + return IterateOverTuple()(f, t, out); + } + + private: + template + struct IterateOverTuple { + OutIter operator() (Func f, const Tup& t, OutIter out) const { + *out++ = f(::testing::get(t)); + return IterateOverTuple()(f, t, out); + } + }; + template + struct IterateOverTuple { + OutIter operator() (Func /* f */, const Tup& /* t */, OutIter out) const { + return out; + } + }; +}; + +// Successively invokes 'f(element)' on each element of the tuple 't', +// appending each result to the 'out' iterator. Returns the final value +// of 'out'. +template +OutIter TransformTupleValues(Func f, const Tuple& t, OutIter out) { + return TransformTupleValuesHelper::Run(f, t, out); +} + +// Implements A(). +template +class AnyMatcherImpl : public MatcherInterface { + public: + virtual bool MatchAndExplain( + T /* x */, MatchResultListener* /* listener */) const { return true; } + virtual void DescribeTo(::std::ostream* os) const { *os << "is anything"; } + virtual void DescribeNegationTo(::std::ostream* os) const { + // This is mostly for completeness' safe, as it's not very useful + // to write Not(A()). However we cannot completely rule out + // such a possibility, and it doesn't hurt to be prepared. + *os << "never matches"; + } +}; + +// Implements _, a matcher that matches any value of any +// type. This is a polymorphic matcher, so we need a template type +// conversion operator to make it appearing as a Matcher for any +// type T. +class AnythingMatcher { + public: + template + operator Matcher() const { return A(); } +}; + +// Implements a matcher that compares a given value with a +// pre-supplied value using one of the ==, <=, <, etc, operators. The +// two values being compared don't have to have the same type. +// +// The matcher defined here is polymorphic (for example, Eq(5) can be +// used to match an int, a short, a double, etc). Therefore we use +// a template type conversion operator in the implementation. +// +// The following template definition assumes that the Rhs parameter is +// a "bare" type (i.e. neither 'const T' nor 'T&'). +template +class ComparisonBase { + public: + explicit ComparisonBase(const Rhs& rhs) : rhs_(rhs) {} + template + operator Matcher() const { + return MakeMatcher(new Impl(rhs_)); + } + + private: + template + class Impl : public MatcherInterface { + public: + explicit Impl(const Rhs& rhs) : rhs_(rhs) {} + virtual bool MatchAndExplain( + Lhs lhs, MatchResultListener* /* listener */) const { + return Op()(lhs, rhs_); + } + virtual void DescribeTo(::std::ostream* os) const { + *os << D::Desc() << " "; + UniversalPrint(rhs_, os); + } + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << D::NegatedDesc() << " "; + UniversalPrint(rhs_, os); + } + private: + Rhs rhs_; + GTEST_DISALLOW_ASSIGN_(Impl); + }; + Rhs rhs_; + GTEST_DISALLOW_ASSIGN_(ComparisonBase); +}; + +template +class EqMatcher : public ComparisonBase, Rhs, AnyEq> { + public: + explicit EqMatcher(const Rhs& rhs) + : ComparisonBase, Rhs, AnyEq>(rhs) { } + static const char* Desc() { return "is equal to"; } + static const char* NegatedDesc() { return "isn't equal to"; } +}; +template +class NeMatcher : public ComparisonBase, Rhs, AnyNe> { + public: + explicit NeMatcher(const Rhs& rhs) + : ComparisonBase, Rhs, AnyNe>(rhs) { } + static const char* Desc() { return "isn't equal to"; } + static const char* NegatedDesc() { return "is equal to"; } +}; +template +class LtMatcher : public ComparisonBase, Rhs, AnyLt> { + public: + explicit LtMatcher(const Rhs& rhs) + : ComparisonBase, Rhs, AnyLt>(rhs) { } + static const char* Desc() { return "is <"; } + static const char* NegatedDesc() { return "isn't <"; } +}; +template +class GtMatcher : public ComparisonBase, Rhs, AnyGt> { + public: + explicit GtMatcher(const Rhs& rhs) + : ComparisonBase, Rhs, AnyGt>(rhs) { } + static const char* Desc() { return "is >"; } + static const char* NegatedDesc() { return "isn't >"; } +}; +template +class LeMatcher : public ComparisonBase, Rhs, AnyLe> { + public: + explicit LeMatcher(const Rhs& rhs) + : ComparisonBase, Rhs, AnyLe>(rhs) { } + static const char* Desc() { return "is <="; } + static const char* NegatedDesc() { return "isn't <="; } +}; +template +class GeMatcher : public ComparisonBase, Rhs, AnyGe> { + public: + explicit GeMatcher(const Rhs& rhs) + : ComparisonBase, Rhs, AnyGe>(rhs) { } + static const char* Desc() { return "is >="; } + static const char* NegatedDesc() { return "isn't >="; } +}; + +// Implements the polymorphic IsNull() matcher, which matches any raw or smart +// pointer that is NULL. +class IsNullMatcher { + public: + template + bool MatchAndExplain(const Pointer& p, + MatchResultListener* /* listener */) const { +#if GTEST_LANG_CXX11 + return p == nullptr; +#else // GTEST_LANG_CXX11 + return GetRawPointer(p) == NULL; +#endif // GTEST_LANG_CXX11 + } + + void DescribeTo(::std::ostream* os) const { *os << "is NULL"; } + void DescribeNegationTo(::std::ostream* os) const { + *os << "isn't NULL"; + } +}; + +// Implements the polymorphic NotNull() matcher, which matches any raw or smart +// pointer that is not NULL. +class NotNullMatcher { + public: + template + bool MatchAndExplain(const Pointer& p, + MatchResultListener* /* listener */) const { +#if GTEST_LANG_CXX11 + return p != nullptr; +#else // GTEST_LANG_CXX11 + return GetRawPointer(p) != NULL; +#endif // GTEST_LANG_CXX11 + } + + void DescribeTo(::std::ostream* os) const { *os << "isn't NULL"; } + void DescribeNegationTo(::std::ostream* os) const { + *os << "is NULL"; + } +}; + +// Ref(variable) matches any argument that is a reference to +// 'variable'. This matcher is polymorphic as it can match any +// super type of the type of 'variable'. +// +// The RefMatcher template class implements Ref(variable). It can +// only be instantiated with a reference type. This prevents a user +// from mistakenly using Ref(x) to match a non-reference function +// argument. For example, the following will righteously cause a +// compiler error: +// +// int n; +// Matcher m1 = Ref(n); // This won't compile. +// Matcher m2 = Ref(n); // This will compile. +template +class RefMatcher; + +template +class RefMatcher { + // Google Mock is a generic framework and thus needs to support + // mocking any function types, including those that take non-const + // reference arguments. Therefore the template parameter T (and + // Super below) can be instantiated to either a const type or a + // non-const type. + public: + // RefMatcher() takes a T& instead of const T&, as we want the + // compiler to catch using Ref(const_value) as a matcher for a + // non-const reference. + explicit RefMatcher(T& x) : object_(x) {} // NOLINT + + template + operator Matcher() const { + // By passing object_ (type T&) to Impl(), which expects a Super&, + // we make sure that Super is a super type of T. In particular, + // this catches using Ref(const_value) as a matcher for a + // non-const reference, as you cannot implicitly convert a const + // reference to a non-const reference. + return MakeMatcher(new Impl(object_)); + } + + private: + template + class Impl : public MatcherInterface { + public: + explicit Impl(Super& x) : object_(x) {} // NOLINT + + // MatchAndExplain() takes a Super& (as opposed to const Super&) + // in order to match the interface MatcherInterface. + virtual bool MatchAndExplain( + Super& x, MatchResultListener* listener) const { + *listener << "which is located @" << static_cast(&x); + return &x == &object_; + } + + virtual void DescribeTo(::std::ostream* os) const { + *os << "references the variable "; + UniversalPrinter::Print(object_, os); + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "does not reference the variable "; + UniversalPrinter::Print(object_, os); + } + + private: + const Super& object_; + + GTEST_DISALLOW_ASSIGN_(Impl); + }; + + T& object_; + + GTEST_DISALLOW_ASSIGN_(RefMatcher); +}; + +// Polymorphic helper functions for narrow and wide string matchers. +inline bool CaseInsensitiveCStringEquals(const char* lhs, const char* rhs) { + return String::CaseInsensitiveCStringEquals(lhs, rhs); +} + +inline bool CaseInsensitiveCStringEquals(const wchar_t* lhs, + const wchar_t* rhs) { + return String::CaseInsensitiveWideCStringEquals(lhs, rhs); +} + +// String comparison for narrow or wide strings that can have embedded NUL +// characters. +template +bool CaseInsensitiveStringEquals(const StringType& s1, + const StringType& s2) { + // Are the heads equal? + if (!CaseInsensitiveCStringEquals(s1.c_str(), s2.c_str())) { + return false; + } + + // Skip the equal heads. + const typename StringType::value_type nul = 0; + const size_t i1 = s1.find(nul), i2 = s2.find(nul); + + // Are we at the end of either s1 or s2? + if (i1 == StringType::npos || i2 == StringType::npos) { + return i1 == i2; + } + + // Are the tails equal? + return CaseInsensitiveStringEquals(s1.substr(i1 + 1), s2.substr(i2 + 1)); +} + +// String matchers. + +// Implements equality-based string matchers like StrEq, StrCaseNe, and etc. +template +class StrEqualityMatcher { + public: + StrEqualityMatcher(const StringType& str, bool expect_eq, + bool case_sensitive) + : string_(str), expect_eq_(expect_eq), case_sensitive_(case_sensitive) {} + + // Accepts pointer types, particularly: + // const char* + // char* + // const wchar_t* + // wchar_t* + template + bool MatchAndExplain(CharType* s, MatchResultListener* listener) const { + if (s == NULL) { + return !expect_eq_; + } + return MatchAndExplain(StringType(s), listener); + } + + // Matches anything that can convert to StringType. + // + // This is a template, not just a plain function with const StringType&, + // because StringPiece has some interfering non-explicit constructors. + template + bool MatchAndExplain(const MatcheeStringType& s, + MatchResultListener* /* listener */) const { + const StringType& s2(s); + const bool eq = case_sensitive_ ? s2 == string_ : + CaseInsensitiveStringEquals(s2, string_); + return expect_eq_ == eq; + } + + void DescribeTo(::std::ostream* os) const { + DescribeToHelper(expect_eq_, os); + } + + void DescribeNegationTo(::std::ostream* os) const { + DescribeToHelper(!expect_eq_, os); + } + + private: + void DescribeToHelper(bool expect_eq, ::std::ostream* os) const { + *os << (expect_eq ? "is " : "isn't "); + *os << "equal to "; + if (!case_sensitive_) { + *os << "(ignoring case) "; + } + UniversalPrint(string_, os); + } + + const StringType string_; + const bool expect_eq_; + const bool case_sensitive_; + + GTEST_DISALLOW_ASSIGN_(StrEqualityMatcher); +}; + +// Implements the polymorphic HasSubstr(substring) matcher, which +// can be used as a Matcher as long as T can be converted to a +// string. +template +class HasSubstrMatcher { + public: + explicit HasSubstrMatcher(const StringType& substring) + : substring_(substring) {} + + // Accepts pointer types, particularly: + // const char* + // char* + // const wchar_t* + // wchar_t* + template + bool MatchAndExplain(CharType* s, MatchResultListener* listener) const { + return s != NULL && MatchAndExplain(StringType(s), listener); + } + + // Matches anything that can convert to StringType. + // + // This is a template, not just a plain function with const StringType&, + // because StringPiece has some interfering non-explicit constructors. + template + bool MatchAndExplain(const MatcheeStringType& s, + MatchResultListener* /* listener */) const { + const StringType& s2(s); + return s2.find(substring_) != StringType::npos; + } + + // Describes what this matcher matches. + void DescribeTo(::std::ostream* os) const { + *os << "has substring "; + UniversalPrint(substring_, os); + } + + void DescribeNegationTo(::std::ostream* os) const { + *os << "has no substring "; + UniversalPrint(substring_, os); + } + + private: + const StringType substring_; + + GTEST_DISALLOW_ASSIGN_(HasSubstrMatcher); +}; + +// Implements the polymorphic StartsWith(substring) matcher, which +// can be used as a Matcher as long as T can be converted to a +// string. +template +class StartsWithMatcher { + public: + explicit StartsWithMatcher(const StringType& prefix) : prefix_(prefix) { + } + + // Accepts pointer types, particularly: + // const char* + // char* + // const wchar_t* + // wchar_t* + template + bool MatchAndExplain(CharType* s, MatchResultListener* listener) const { + return s != NULL && MatchAndExplain(StringType(s), listener); + } + + // Matches anything that can convert to StringType. + // + // This is a template, not just a plain function with const StringType&, + // because StringPiece has some interfering non-explicit constructors. + template + bool MatchAndExplain(const MatcheeStringType& s, + MatchResultListener* /* listener */) const { + const StringType& s2(s); + return s2.length() >= prefix_.length() && + s2.substr(0, prefix_.length()) == prefix_; + } + + void DescribeTo(::std::ostream* os) const { + *os << "starts with "; + UniversalPrint(prefix_, os); + } + + void DescribeNegationTo(::std::ostream* os) const { + *os << "doesn't start with "; + UniversalPrint(prefix_, os); + } + + private: + const StringType prefix_; + + GTEST_DISALLOW_ASSIGN_(StartsWithMatcher); +}; + +// Implements the polymorphic EndsWith(substring) matcher, which +// can be used as a Matcher as long as T can be converted to a +// string. +template +class EndsWithMatcher { + public: + explicit EndsWithMatcher(const StringType& suffix) : suffix_(suffix) {} + + // Accepts pointer types, particularly: + // const char* + // char* + // const wchar_t* + // wchar_t* + template + bool MatchAndExplain(CharType* s, MatchResultListener* listener) const { + return s != NULL && MatchAndExplain(StringType(s), listener); + } + + // Matches anything that can convert to StringType. + // + // This is a template, not just a plain function with const StringType&, + // because StringPiece has some interfering non-explicit constructors. + template + bool MatchAndExplain(const MatcheeStringType& s, + MatchResultListener* /* listener */) const { + const StringType& s2(s); + return s2.length() >= suffix_.length() && + s2.substr(s2.length() - suffix_.length()) == suffix_; + } + + void DescribeTo(::std::ostream* os) const { + *os << "ends with "; + UniversalPrint(suffix_, os); + } + + void DescribeNegationTo(::std::ostream* os) const { + *os << "doesn't end with "; + UniversalPrint(suffix_, os); + } + + private: + const StringType suffix_; + + GTEST_DISALLOW_ASSIGN_(EndsWithMatcher); +}; + +// Implements polymorphic matchers MatchesRegex(regex) and +// ContainsRegex(regex), which can be used as a Matcher as long as +// T can be converted to a string. +class MatchesRegexMatcher { + public: + MatchesRegexMatcher(const RE* regex, bool full_match) + : regex_(regex), full_match_(full_match) {} + + // Accepts pointer types, particularly: + // const char* + // char* + // const wchar_t* + // wchar_t* + template + bool MatchAndExplain(CharType* s, MatchResultListener* listener) const { + return s != NULL && MatchAndExplain(internal::string(s), listener); + } + + // Matches anything that can convert to internal::string. + // + // This is a template, not just a plain function with const internal::string&, + // because StringPiece has some interfering non-explicit constructors. + template + bool MatchAndExplain(const MatcheeStringType& s, + MatchResultListener* /* listener */) const { + const internal::string& s2(s); + return full_match_ ? RE::FullMatch(s2, *regex_) : + RE::PartialMatch(s2, *regex_); + } + + void DescribeTo(::std::ostream* os) const { + *os << (full_match_ ? "matches" : "contains") + << " regular expression "; + UniversalPrinter::Print(regex_->pattern(), os); + } + + void DescribeNegationTo(::std::ostream* os) const { + *os << "doesn't " << (full_match_ ? "match" : "contain") + << " regular expression "; + UniversalPrinter::Print(regex_->pattern(), os); + } + + private: + const internal::linked_ptr regex_; + const bool full_match_; + + GTEST_DISALLOW_ASSIGN_(MatchesRegexMatcher); +}; + +// Implements a matcher that compares the two fields of a 2-tuple +// using one of the ==, <=, <, etc, operators. The two fields being +// compared don't have to have the same type. +// +// The matcher defined here is polymorphic (for example, Eq() can be +// used to match a tuple, a tuple, +// etc). Therefore we use a template type conversion operator in the +// implementation. +template +class PairMatchBase { + public: + template + operator Matcher< ::testing::tuple >() const { + return MakeMatcher(new Impl< ::testing::tuple >); + } + template + operator Matcher&>() const { + return MakeMatcher(new Impl&>); + } + + private: + static ::std::ostream& GetDesc(::std::ostream& os) { // NOLINT + return os << D::Desc(); + } + + template + class Impl : public MatcherInterface { + public: + virtual bool MatchAndExplain( + Tuple args, + MatchResultListener* /* listener */) const { + return Op()(::testing::get<0>(args), ::testing::get<1>(args)); + } + virtual void DescribeTo(::std::ostream* os) const { + *os << "are " << GetDesc; + } + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "aren't " << GetDesc; + } + }; +}; + +class Eq2Matcher : public PairMatchBase { + public: + static const char* Desc() { return "an equal pair"; } +}; +class Ne2Matcher : public PairMatchBase { + public: + static const char* Desc() { return "an unequal pair"; } +}; +class Lt2Matcher : public PairMatchBase { + public: + static const char* Desc() { return "a pair where the first < the second"; } +}; +class Gt2Matcher : public PairMatchBase { + public: + static const char* Desc() { return "a pair where the first > the second"; } +}; +class Le2Matcher : public PairMatchBase { + public: + static const char* Desc() { return "a pair where the first <= the second"; } +}; +class Ge2Matcher : public PairMatchBase { + public: + static const char* Desc() { return "a pair where the first >= the second"; } +}; + +// Implements the Not(...) matcher for a particular argument type T. +// We do not nest it inside the NotMatcher class template, as that +// will prevent different instantiations of NotMatcher from sharing +// the same NotMatcherImpl class. +template +class NotMatcherImpl : public MatcherInterface { + public: + explicit NotMatcherImpl(const Matcher& matcher) + : matcher_(matcher) {} + + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const { + return !matcher_.MatchAndExplain(x, listener); + } + + virtual void DescribeTo(::std::ostream* os) const { + matcher_.DescribeNegationTo(os); + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + matcher_.DescribeTo(os); + } + + private: + const Matcher matcher_; + + GTEST_DISALLOW_ASSIGN_(NotMatcherImpl); +}; + +// Implements the Not(m) matcher, which matches a value that doesn't +// match matcher m. +template +class NotMatcher { + public: + explicit NotMatcher(InnerMatcher matcher) : matcher_(matcher) {} + + // This template type conversion operator allows Not(m) to be used + // to match any type m can match. + template + operator Matcher() const { + return Matcher(new NotMatcherImpl(SafeMatcherCast(matcher_))); + } + + private: + InnerMatcher matcher_; + + GTEST_DISALLOW_ASSIGN_(NotMatcher); +}; + +// Implements the AllOf(m1, m2) matcher for a particular argument type +// T. We do not nest it inside the BothOfMatcher class template, as +// that will prevent different instantiations of BothOfMatcher from +// sharing the same BothOfMatcherImpl class. +template +class BothOfMatcherImpl : public MatcherInterface { + public: + BothOfMatcherImpl(const Matcher& matcher1, const Matcher& matcher2) + : matcher1_(matcher1), matcher2_(matcher2) {} + + virtual void DescribeTo(::std::ostream* os) const { + *os << "("; + matcher1_.DescribeTo(os); + *os << ") and ("; + matcher2_.DescribeTo(os); + *os << ")"; + } + + virtual void DescribeNegationTo(::std::ostream* os) const { + *os << "("; + matcher1_.DescribeNegationTo(os); + *os << ") or ("; + matcher2_.DescribeNegationTo(os); + *os << ")"; + } + + virtual bool MatchAndExplain(T x, MatchResultListener* listener) const { + // If either matcher1_ or matcher2_ doesn't match x, we only need + // to explain why one of them fails. + StringMatchResultListener listener1; + if (!matcher1_.MatchAndExplain(x, &listener1)) { + *listener << listener1.str(); + return false; + } + + StringMatchResultListener listener2; + if (!matcher2_.MatchAndExplain(x, &listener2)) { + *listener << listener2.str(); + return false; + } + + // Otherwise we need to explain why *both* of them match. + const internal::string s1 = listener1.str(); + const internal::string s2 = listener2.str(); + + if (s1 == "") { + *listener << s2; + } else { + *listener << s1; + if (s2 != "") { + *listener << ", and " << s2; + } + } + return true; + } + + private: + const Matcher matcher1_; + const Matcher matcher2_; + + GTEST_DISALLOW_ASSIGN_(BothOfMatcherImpl); +}; + +#if GTEST_LANG_CXX11 +// MatcherList provides mechanisms for storing a variable number of matchers in +// a list structure (ListType) and creating a combining matcher from such a +// list. +// The template is defined recursively using the following template paramters: +// * kSize is the length of the MatcherList. +// * Head is the type of the first matcher of the list. +// * Tail denotes the types of the remaining matchers of the list. +template +struct MatcherList { + typedef MatcherList MatcherListTail; + typedef ::std::pair ListType; + + // BuildList stores variadic type values in a nested pair structure. + // Example: + // MatcherList<3, int, string, float>::BuildList(5, "foo", 2.0) will return + // the corresponding result of type pair>. + static ListType BuildList(const Head& matcher, const Tail&... tail) { + return ListType(matcher, MatcherListTail::BuildList(tail...)); + } + + // CreateMatcher creates a Matcher from a given list of matchers (built + // by BuildList()). CombiningMatcher is used to combine the matchers of the + // list. CombiningMatcher must implement MatcherInterface and have a + // constructor taking two Matchers as input. + template class CombiningMatcher> + static Matcher CreateMatcher(const ListType& matchers) { + return Matcher(new CombiningMatcher( + SafeMatcherCast(matchers.first), + MatcherListTail::template CreateMatcher( + matchers.second))); + } +}; + +// The following defines the base case for the recursive definition of +// MatcherList. +template +struct MatcherList<2, Matcher1, Matcher2> { + typedef ::std::pair ListType; + + static ListType BuildList(const Matcher1& matcher1, + const Matcher2& matcher2) { + return ::std::pair(matcher1, matcher2); + } + + template class CombiningMatcher> + static Matcher CreateMatcher(const ListType& matchers) { + return Matcher(new CombiningMatcher( + SafeMatcherCast(matchers.first), + SafeMatcherCast(matchers.second))); + } +}; + +// VariadicMatcher is used for the variadic implementation of +// AllOf(m_1, m_2, ...) and AnyOf(m_1, m_2, ...). +// CombiningMatcher is used to recursively combine the provided matchers +// (of type Args...). +template