gatus/vendor/github.com/TwiN/g8

g8

g8, pronounced gate, is a simple Go library for protecting HTTP handlers.

Tired of constantly re-implementing a security layer for each application? Me too, that's why I made g8.

Installation

go get -u github.com/TwiN/g8

Usage

Because the entire purpose of g8 is to NOT waste time configuring the layer of security, the primary emphasis is to keep it as simple as possible.

Simple

Just want a simple layer of security without the need for advanced permissions? This configuration is what you're looking for.

authorizationService := g8.NewAuthorizationService().WithToken("mytoken")
gate := g8.New().WithAuthorizationService(authorizationService)

router := http.NewServeMux()
router.Handle("/unprotected", yourHandler)
router.Handle("/protected", gate.Protect(yourHandler))

http.ListenAndServe(":8080", router)

The endpoint /protected is now only accessible if you pass the header Authorization: Bearer mytoken.

If you use http.HandleFunc instead of http.Handle, you may use gate.ProtectFunc(yourHandler) instead.

If you're not using the Authorization header, you can specify a custom token extractor. This enables use cases like Protecting a handler using session cookie

Advanced permissions

If you have tokens with more permissions than others, g8's permission system will make managing authorization a breeze.

Rather than registering tokens, think of it as registering clients, the only difference being that clients may be configured with permissions while tokens cannot.

authorizationService := g8.NewAuthorizationService().WithClient(g8.NewClient("mytoken").WithPermission("admin"))
gate := g8.New().WithAuthorizationService(authorizationService)

router := http.NewServeMux()
router.Handle("/unprotected", yourHandler)
router.Handle("/protected-with-admin", gate.ProtectWithPermissions(yourHandler, []string{"admin"}))

http.ListenAndServe(":8080", router)

The endpoint /protected-with-admin is now only accessible if you pass the header Authorization: Bearer mytoken, because the client with the token mytoken has the permission admin. Note that the following handler would also be accessible with that token:

router.Handle("/protected", gate.Protect(yourHandler))

To clarify, both clients and tokens have access to handlers that aren't protected with extra permissions, and essentially, tokens are registered as clients with no extra permissions in the background.

Creating a token like so:

authorizationService := g8.NewAuthorizationService().WithToken("mytoken")

is the equivalent of creating the following client:

authorizationService := g8.NewAuthorizationService().WithClient(g8.NewClient("mytoken"))

With client provider

A client provider's task is to retrieve a Client from an external source (e.g. a database) when provided with a token. You should use a client provider when you have a lot of tokens and it wouldn't make sense to register all of them using AuthorizationService's WithToken/WithTokens/WithClient/WithClients.

Note that the provider is used as a fallback source. As such, if a token is explicitly registered using one of the 4 aforementioned functions, the client provider will not be used.

clientProvider := g8.NewClientProvider(func(token string) *g8.Client {
    // We'll assume that the following function calls your database and returns a struct "User" that 
    // has the user's token as well as the permissions granted to said user
    user := database.GetUserByToken(token)
    if user != nil {
        return g8.NewClient(user.Token).WithPermissions(user.Permissions)
    }
    return nil
})
authorizationService := g8.NewAuthorizationService().WithClientProvider(clientProvider)
gate := g8.New().WithAuthorizationService(authorizationService)

You can also configure the client provider to cache the output of the function you provide to retrieve clients by token:

clientProvider := g8.NewClientProvider(...).WithCache(ttl, maxSize)

Since g8 leverages TwiN/gocache, you can also use gocache's constants for configuring the TTL and the maximum size:

• Setting the TTL to gocache.NoExpiration (-1) will disable the TTL.
• Setting the maximum size to gocache.NoMaxSize (0) will disable the maximum cache size

If you're using a TTL and have a lot of tokens (100k+), you may want to use clientProvider.StartJanitor() to allow the cache to passively delete expired entries. If you have to re-initialize the client provider after the janitor has been started, make sure to stop the janitor first (clientProvider.StopJanitor()). This is because the janitor runs on a separate goroutine, thus, if you were to re-create a client provider and re-assign it, the old client provider would still exist in memory with the old cache. I'm only specifying this for completeness, because for the overwhelming majority of people, the gate will be created on application start and never modified again until the application shuts down, in which case, you don't even need to worry about stopping the janitor.

To avoid any misunderstandings, using a client provider is not mandatory. If you only have a few tokens and you can load them on application start, you can just leverage AuthorizationService's WithToken/WithTokens/WithClient/WithClients.

AuthorizationService

As the previous examples may have hinted, there are several ways to create clients. The one thing they have in common is that they all go through AuthorizationService, which is in charge of both managing clients and determining whether a request should be blocked or allowed through.

Function	Description
WithToken	Creates a single static client with no extra permissions
WithTokens	Creates a slice of static clients with no extra permissions
WithClient	Creates a single static client
WithClients	Creates a slice of static clients
WithClientProvider	Creates a client provider which will allow a fallback to a dynamic source (e.g. to a database) when a static client is not found

Except for WithClientProvider, every functions listed above can be called more than once. As a result, you may safely perform actions like this:

authorizationService := g8.NewAuthorizationService().
    WithToken("123").
    WithToken("456").
    WithClient(g8.NewClient("789").WithPermission("admin"))
gate := g8.New().WithAuthorizationService(authorizationService)

Be aware that g8.Client supports a list of permissions as well. You may call WithPermission several times, or call WithPermissions with a slice of permissions instead.

Permissions

Unlike client permissions, handler permissions are requirements.

A client may have as many permissions as you want, but for said client to have access to a handler protected by permissions, the client must have all permissions defined by said handler in order to have access to it.

In other words, a client with the permissions create, read, update and delete would have access to all of these handlers:

gate := g8.New().WithAuthorizationService(g8.NewAuthorizationService().WithClient(g8.NewClient("mytoken").WithPermissions([]string{"create", "read", "update", "delete"})))
router := http.NewServeMux()
router.Handle("/", gate.Protect(homeHandler)) // equivalent of gate.ProtectWithPermissions(homeHandler, []string{})
router.Handle("/create", gate.ProtectWithPermissions(createHandler, []string{"create"}))
router.Handle("/read", gate.ProtectWithPermissions(readHandler, []string{"read"}))
router.Handle("/update", gate.ProtectWithPermissions(updateHandler, []string{"update"}))
router.Handle("/delete", gate.ProtectWithPermissions(deleteHandler, []string{"delete"}))
router.Handle("/crud", gate.ProtectWithPermissions(crudHandler, []string{"create", "read", "update", "delete"}))

But it would not have access to the following handler, because while mytoken has the read permission, it does not have the backup permission:

router.Handle("/backup", gate.ProtectWithPermissions(&testHandler{}, []string{"read", "backup"}))

Rate limiting

To add a rate limit of 100 requests per second:

gate := g8.New().WithRateLimit(100)

Special use cases

Protecting a handler using session cookie

If you want to only allow authenticated users to access a handler, you can use a custom token extractor function combined with a client provider.

First, we'll create a function to extract the session ID from the session cookie. While a session ID does not theoretically refer to a token, g8 uses the term token as a blanket term to refer to any string that can be used to identify a client.

customTokenExtractorFunc := func(request *http.Request) string {
    sessionCookie, err := request.Cookie("session")
    if err != nil {
        return ""
    }
    return sessionCookie.Value
}

Next, we need to create a client provider that will validate our token, which refers to the session ID in this case.

clientProvider := g8.NewClientProvider(func(token string) *g8.Client {
    // We'll assume that the following function calls your database and validates whether the session is valid.
    isSessionValid := database.CheckIfSessionIsValid(token)
    if !isSessionValid {
        return nil // Returning nil will cause the gate to return a 401 Unauthorized.
    }
    // You could also retrieve the user and their permissions if you wanted instead, but for this example,
    // all we care about is confirming whether the session is valid or not.
    return g8.NewClient(token)
})

Keep in mind that you can get really creative with the client provider above. For instance, you could refresh the session's expiration time, which will allow the user to stay logged in for as long as they're active.

You're also not limited to using something stateful like the example above. You could use a JWT and have your client provider validate said JWT.

Finally, we can create the authorization service and the gate:

authorizationService := g8.NewAuthorizationService().WithClientProvider(clientProvider)
gate := g8.New().WithAuthorizationService(authorizationService).WithCustomTokenExtractor(customTokenExtractorFunc)

If you need to access the token (session ID in this case) from the protected handlers, you can retrieve it from the request context by using the key g8.TokenContextKey:

http.Handle("/handle", gate.ProtectFunc(func(w http.ResponseWriter, r *http.Request) {
    sessionID, _ := r.Context().Value(g8.TokenContextKey).(string)
    // ...
}))