netbird/client/internal/engine.go

1512 lines
41 KiB
Go
Raw Normal View History

package internal
2021-05-01 12:45:37 +02:00
import (
"context"
"errors"
2021-05-01 12:45:37 +02:00
"fmt"
"maps"
"math/rand"
"net"
"net/netip"
"reflect"
"runtime"
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
"slices"
"strings"
"sync"
"time"
"github.com/pion/ice/v3"
"github.com/pion/stun/v2"
log "github.com/sirupsen/logrus"
"golang.zx2c4.com/wireguard/wgctrl/wgtypes"
"github.com/netbirdio/netbird/client/firewall"
"github.com/netbirdio/netbird/client/firewall/manager"
"github.com/netbirdio/netbird/client/internal/acl"
"github.com/netbirdio/netbird/client/internal/dns"
"github.com/netbirdio/netbird/client/internal/networkmonitor"
"github.com/netbirdio/netbird/client/internal/peer"
"github.com/netbirdio/netbird/client/internal/relay"
"github.com/netbirdio/netbird/client/internal/rosenpass"
"github.com/netbirdio/netbird/client/internal/routemanager"
2024-06-19 12:12:11 +02:00
"github.com/netbirdio/netbird/client/internal/routemanager/systemops"
"github.com/netbirdio/netbird/client/internal/wgproxy"
nbssh "github.com/netbirdio/netbird/client/ssh"
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
"github.com/netbirdio/netbird/client/system"
nbdns "github.com/netbirdio/netbird/dns"
"github.com/netbirdio/netbird/iface"
"github.com/netbirdio/netbird/iface/bind"
mgm "github.com/netbirdio/netbird/management/client"
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
"github.com/netbirdio/netbird/management/domain"
mgmProto "github.com/netbirdio/netbird/management/proto"
"github.com/netbirdio/netbird/route"
signal "github.com/netbirdio/netbird/signal/client"
sProto "github.com/netbirdio/netbird/signal/proto"
"github.com/netbirdio/netbird/util"
nbnet "github.com/netbirdio/netbird/util/net"
2021-05-01 12:45:37 +02:00
)
// PeerConnectionTimeoutMax is a timeout of an initial connection attempt to a remote peer.
// E.g. this peer will wait PeerConnectionTimeoutMax for the remote peer to respond,
// if not successful then it will retry the connection attempt.
Refactor Interface package and update windows driver (#192) * script to generate syso files * test wireguard-windows driver package * set int log * add windows test * add windows test * verbose bash * use cd * move checkout * exit 0 * removed tty flag * artifact path * fix tags and add cache * fix cache * fix cache * test dir * restore artifacts in the root * try dll file * try dll file * copy dll * typo in copy dll * compile test * checkout first * updated cicd * fix add address issue and gen GUID * psexec typo * accept eula * mod tidy before tests * regular test exec and verbose test with psexec * test all * return WGInterface Interface * use WgIfaceName and timeout after 30 seconds * different ports and validate connect 2 peers * Use time.After for timeout and close interface * Use time.After for testing connect peers * WG Interface struct * Update engine and parse address * refactor Linux create and assignAddress * NewWGIface and configuration methods * Update proxy with interface methods * update up command test * resolve lint warnings * remove psexec test * close copied files * add goos before build * run tests on mac,windows and linux * cache by testing os * run on push * fix indentation * adjust test timeouts * remove parallel flag * mod tidy before test * ignore syso files * removed functions and renamed vars * different IPs for connect peers test * Generate syso with DLL * Single Close method * use port from test constant * test: remove wireguard interfaces after finishing engine test * use load_wgnt_from_rsrc Co-authored-by: braginini <bangvalo@gmail.com>
2022-01-17 14:01:58 +01:00
// Todo pass timeout at EnginConfig
const (
PeerConnectionTimeoutMax = 45000 // ms
PeerConnectionTimeoutMin = 30000 // ms
)
var ErrResetConnection = fmt.Errorf("reset connection")
// EngineConfig is a config for the Engine
type EngineConfig struct {
Refactor Interface package and update windows driver (#192) * script to generate syso files * test wireguard-windows driver package * set int log * add windows test * add windows test * verbose bash * use cd * move checkout * exit 0 * removed tty flag * artifact path * fix tags and add cache * fix cache * fix cache * test dir * restore artifacts in the root * try dll file * try dll file * copy dll * typo in copy dll * compile test * checkout first * updated cicd * fix add address issue and gen GUID * psexec typo * accept eula * mod tidy before tests * regular test exec and verbose test with psexec * test all * return WGInterface Interface * use WgIfaceName and timeout after 30 seconds * different ports and validate connect 2 peers * Use time.After for timeout and close interface * Use time.After for testing connect peers * WG Interface struct * Update engine and parse address * refactor Linux create and assignAddress * NewWGIface and configuration methods * Update proxy with interface methods * update up command test * resolve lint warnings * remove psexec test * close copied files * add goos before build * run tests on mac,windows and linux * cache by testing os * run on push * fix indentation * adjust test timeouts * remove parallel flag * mod tidy before test * ignore syso files * removed functions and renamed vars * different IPs for connect peers test * Generate syso with DLL * Single Close method * use port from test constant * test: remove wireguard interfaces after finishing engine test * use load_wgnt_from_rsrc Co-authored-by: braginini <bangvalo@gmail.com>
2022-01-17 14:01:58 +01:00
WgPort int
WgIfaceName string
// WgAddr is a Wireguard local address (Netbird Network IP)
WgAddr string
// WgPrivateKey is a Wireguard private key of our peer (it MUST never leave the machine)
WgPrivateKey wgtypes.Key
// NetworkMonitor is a flag to enable network monitoring
NetworkMonitor bool
// IFaceBlackList is a list of network interfaces to ignore when discovering connection candidates (ICE related)
IFaceBlackList []string
DisableIPv6Discovery bool
PreSharedKey *wgtypes.Key
// UDPMuxPort default value 0 - the system will pick an available port
UDPMuxPort int
// UDPMuxSrflxPort default value 0 - the system will pick an available port
UDPMuxSrflxPort int
// SSHKey is a private SSH key in a PEM format
SSHKey []byte
NATExternalIPs []string
CustomDNSAddress string
RosenpassEnabled bool
RosenpassPermissive bool
ServerSSHAllowed bool
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
DNSRouteInterval time.Duration
}
// Engine is a mechanism responsible for reacting on Signal and Management stream events and managing connections to the remote peers.
2021-05-01 12:45:37 +02:00
type Engine struct {
// signal is a Signal Service client
signal signal.Client
// mgmClient is a Management Service client
mgmClient mgm.Client
// peerConns is a map that holds all the peers that are known to this peer
peerConns map[string]*peer.Conn
beforePeerHook nbnet.AddHookFunc
afterPeerHook nbnet.RemoveHookFunc
// rpManager is a Rosenpass manager
rpManager *rosenpass.Manager
// syncMsgMux is used to guarantee sequential Management Service message processing
syncMsgMux *sync.Mutex
config *EngineConfig
mobileDep MobileDependency
// STUNs is a list of STUN servers used by ICE
STUNs []*stun.URI
// TURNs is a list of STUN servers used by ICE
TURNs []*stun.URI
// clientRoutes is the most recent list of clientRoutes received from the Management Service
clientRoutes route.HAMap
clientRoutesMu sync.RWMutex
clientCtx context.Context
clientCancel context.CancelFunc
ctx context.Context
cancel context.CancelFunc
Refactor Interface package and update windows driver (#192) * script to generate syso files * test wireguard-windows driver package * set int log * add windows test * add windows test * verbose bash * use cd * move checkout * exit 0 * removed tty flag * artifact path * fix tags and add cache * fix cache * fix cache * test dir * restore artifacts in the root * try dll file * try dll file * copy dll * typo in copy dll * compile test * checkout first * updated cicd * fix add address issue and gen GUID * psexec typo * accept eula * mod tidy before tests * regular test exec and verbose test with psexec * test all * return WGInterface Interface * use WgIfaceName and timeout after 30 seconds * different ports and validate connect 2 peers * Use time.After for timeout and close interface * Use time.After for testing connect peers * WG Interface struct * Update engine and parse address * refactor Linux create and assignAddress * NewWGIface and configuration methods * Update proxy with interface methods * update up command test * resolve lint warnings * remove psexec test * close copied files * add goos before build * run tests on mac,windows and linux * cache by testing os * run on push * fix indentation * adjust test timeouts * remove parallel flag * mod tidy before test * ignore syso files * removed functions and renamed vars * different IPs for connect peers test * Generate syso with DLL * Single Close method * use port from test constant * test: remove wireguard interfaces after finishing engine test * use load_wgnt_from_rsrc Co-authored-by: braginini <bangvalo@gmail.com>
2022-01-17 14:01:58 +01:00
wgInterface *iface.WGIface
wgProxyFactory *wgproxy.Factory
udpMux *bind.UniversalUDPMuxDefault
// networkSerial is the latest CurrentSerial (state ID) of the network sent by the Management service
networkSerial uint64
networkMonitor *networkmonitor.NetworkMonitor
sshServerFunc func(hostKeyPEM []byte, addr string) (nbssh.Server, error)
sshServer nbssh.Server
2022-07-02 12:02:17 +02:00
statusRecorder *peer.Status
firewall manager.Manager
routeManager routemanager.Manager
acl acl.Manager
dnsServer dns.Server
mgmProbe *Probe
signalProbe *Probe
relayProbe *Probe
wgProbe *Probe
wgConnWorker sync.WaitGroup
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
// checks are the client-applied posture checks that need to be evaluated on the client
checks []*mgmProto.Checks
2021-05-01 12:45:37 +02:00
}
// Peer is an instance of the Connection Peer
2021-05-01 12:45:37 +02:00
type Peer struct {
WgPubKey string
WgAllowedIps string
}
// NewEngine creates a new Connection Engine
func NewEngine(
clientCtx context.Context,
clientCancel context.CancelFunc,
signalClient signal.Client,
mgmClient mgm.Client,
config *EngineConfig,
mobileDep MobileDependency,
statusRecorder *peer.Status,
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
checks []*mgmProto.Checks,
) *Engine {
return NewEngineWithProbes(
clientCtx,
clientCancel,
signalClient,
mgmClient,
config,
mobileDep,
statusRecorder,
nil,
nil,
nil,
nil,
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
checks,
)
}
// NewEngineWithProbes creates a new Connection Engine with probes attached
func NewEngineWithProbes(
clientCtx context.Context,
clientCancel context.CancelFunc,
signalClient signal.Client,
mgmClient mgm.Client,
config *EngineConfig,
mobileDep MobileDependency,
statusRecorder *peer.Status,
mgmProbe *Probe,
signalProbe *Probe,
relayProbe *Probe,
wgProbe *Probe,
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
checks []*mgmProto.Checks,
) *Engine {
2021-05-01 12:45:37 +02:00
return &Engine{
clientCtx: clientCtx,
clientCancel: clientCancel,
2022-07-02 12:02:17 +02:00
signal: signalClient,
mgmClient: mgmClient,
peerConns: make(map[string]*peer.Conn),
2022-07-02 12:02:17 +02:00
syncMsgMux: &sync.Mutex{},
config: config,
mobileDep: mobileDep,
STUNs: []*stun.URI{},
TURNs: []*stun.URI{},
2022-07-02 12:02:17 +02:00
networkSerial: 0,
sshServerFunc: nbssh.DefaultSSHServer,
statusRecorder: statusRecorder,
mgmProbe: mgmProbe,
signalProbe: signalProbe,
relayProbe: relayProbe,
wgProbe: wgProbe,
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
checks: checks,
}
}
func (e *Engine) Stop() error {
e.syncMsgMux.Lock()
defer e.syncMsgMux.Unlock()
if e.cancel != nil {
e.cancel()
}
// stopping network monitor first to avoid starting the engine again
if e.networkMonitor != nil {
e.networkMonitor.Stop()
}
log.Info("Network monitor: stopped")
err := e.removeAllPeers()
if err != nil {
return err
}
e.clientRoutesMu.Lock()
e.clientRoutes = nil
e.clientRoutesMu.Unlock()
// very ugly but we want to remove peers from the WireGuard interface first before removing interface.
// Removing peers happens in the conn.Close() asynchronously
time.Sleep(500 * time.Millisecond)
e.close()
e.wgConnWorker.Wait()
log.Infof("stopped Netbird Engine")
return nil
2021-05-01 12:45:37 +02:00
}
// Start creates a new WireGuard tunnel interface and listens to events from Signal and Management services
// Connections to remote peers are not established here.
// However, they will be established once an event with a list of peers to connect to will be received from Management Service
func (e *Engine) Start() error {
e.syncMsgMux.Lock()
defer e.syncMsgMux.Unlock()
if e.cancel != nil {
e.cancel()
}
e.ctx, e.cancel = context.WithCancel(e.clientCtx)
wgIface, err := e.newWgIface()
if err != nil {
log.Errorf("failed creating wireguard interface instance %s: [%s]", e.config.WgIfaceName, err)
return fmt.Errorf("new wg interface: %w", err)
}
e.wgInterface = wgIface
userspace := e.wgInterface.IsUserspaceBind()
e.wgProxyFactory = wgproxy.NewFactory(e.ctx, userspace, e.config.WgPort)
if e.config.RosenpassEnabled {
log.Infof("rosenpass is enabled")
if e.config.RosenpassPermissive {
log.Infof("running rosenpass in permissive mode")
} else {
log.Infof("running rosenpass in strict mode")
}
e.rpManager, err = rosenpass.NewManager(e.config.PreSharedKey, e.config.WgIfaceName)
if err != nil {
return fmt.Errorf("create rosenpass manager: %w", err)
}
err := e.rpManager.Run()
if err != nil {
return fmt.Errorf("run rosenpass manager: %w", err)
}
}
initialRoutes, dnsServer, err := e.newDnsServer()
if err != nil {
e.close()
return fmt.Errorf("create dns server: %w", err)
}
e.dnsServer = dnsServer
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
e.routeManager = routemanager.NewManager(e.ctx, e.config.WgPrivateKey.PublicKey().String(), e.config.DNSRouteInterval, e.wgInterface, e.statusRecorder, initialRoutes)
beforePeerHook, afterPeerHook, err := e.routeManager.Init()
if err != nil {
log.Errorf("Failed to initialize route manager: %s", err)
} else {
e.beforePeerHook = beforePeerHook
e.afterPeerHook = afterPeerHook
}
e.routeManager.SetRouteChangeListener(e.mobileDep.NetworkChangeListener)
err = e.wgInterfaceCreate()
2021-05-01 12:45:37 +02:00
if err != nil {
log.Errorf("failed creating tunnel interface %s: [%s]", e.config.WgIfaceName, err.Error())
e.close()
return fmt.Errorf("create wg interface: %w", err)
2021-05-01 12:45:37 +02:00
}
e.firewall, err = firewall.NewFirewall(e.ctx, e.wgInterface)
if err != nil {
log.Errorf("failed creating firewall manager: %s", err)
}
if e.firewall != nil && e.firewall.IsServerRouteSupported() {
err = e.routeManager.EnableServerRouter(e.firewall)
if err != nil {
e.close()
return fmt.Errorf("enable server router: %w", err)
}
}
e.udpMux, err = e.wgInterface.Up()
2021-05-01 12:45:37 +02:00
if err != nil {
log.Errorf("failed to pull up wgInterface [%s]: %s", e.wgInterface.Name(), err.Error())
e.close()
return fmt.Errorf("up wg interface: %w", err)
2021-05-01 12:45:37 +02:00
}
if e.firewall != nil {
e.acl = acl.NewDefaultManager(e.firewall)
}
err = e.dnsServer.Initialize()
if err != nil {
e.close()
return fmt.Errorf("initialize dns server: %w", err)
}
e.receiveSignalEvents()
e.receiveManagementEvents()
e.receiveProbeEvents()
2021-05-01 12:45:37 +02:00
// starting network monitor at the very last to avoid disruptions
e.startNetworkMonitor()
2021-05-01 12:45:37 +02:00
return nil
}
// modifyPeers updates peers that have been modified (e.g. IP address has been changed).
// It closes the existing connection, removes it from the peerConns map, and creates a new one.
func (e *Engine) modifyPeers(peersUpdate []*mgmProto.RemotePeerConfig) error {
// first, check if peers have been modified
var modified []*mgmProto.RemotePeerConfig
for _, p := range peersUpdate {
peerPubKey := p.GetWgPubKey()
if peerConn, ok := e.peerConns[peerPubKey]; ok {
if peerConn.WgConfig().AllowedIps != strings.Join(p.AllowedIps, ",") {
modified = append(modified, p)
continue
}
err := e.statusRecorder.UpdatePeerFQDN(peerPubKey, p.GetFqdn())
if err != nil {
log.Warnf("error updating peer's %s fqdn in the status recorder, got error: %v", peerPubKey, err)
}
}
}
// second, close all modified connections and remove them from the state map
for _, p := range modified {
err := e.removePeer(p.GetWgPubKey())
if err != nil {
return err
}
}
// third, add the peer connections again
for _, p := range modified {
err := e.addNewPeer(p)
if err != nil {
return err
}
}
return nil
}
// removePeers finds and removes peers that do not exist anymore in the network map received from the Management Service.
// It also removes peers that have been modified (e.g. change of IP address). They will be added again in addPeers method.
func (e *Engine) removePeers(peersUpdate []*mgmProto.RemotePeerConfig) error {
currentPeers := make([]string, 0, len(e.peerConns))
for p := range e.peerConns {
currentPeers = append(currentPeers, p)
}
newPeers := make([]string, 0, len(peersUpdate))
for _, p := range peersUpdate {
newPeers = append(newPeers, p.GetWgPubKey())
}
toRemove := util.SliceDiff(currentPeers, newPeers)
for _, p := range toRemove {
err := e.removePeer(p)
if err != nil {
return err
}
log.Infof("removed peer %s", p)
}
return nil
}
func (e *Engine) removeAllPeers() error {
log.Debugf("removing all peer connections")
for p := range e.peerConns {
err := e.removePeer(p)
if err != nil {
return err
}
}
return nil
}
// removePeer closes an existing peer connection, removes a peer, and clears authorized key of the SSH server
func (e *Engine) removePeer(peerKey string) error {
log.Debugf("removing peer from engine %s", peerKey)
if !isNil(e.sshServer) {
e.sshServer.RemoveAuthorizedKey(peerKey)
}
defer func() {
2022-07-02 12:02:17 +02:00
err := e.statusRecorder.RemovePeer(peerKey)
if err != nil {
log.Warnf("received error when removing peer %s from status recorder: %v", peerKey, err)
2022-07-02 12:02:17 +02:00
}
}()
2022-07-02 12:02:17 +02:00
conn, exists := e.peerConns[peerKey]
if exists {
delete(e.peerConns, peerKey)
err := conn.Close()
if err != nil {
switch err.(type) {
case *peer.ConnectionAlreadyClosedError:
return nil
default:
return err
}
}
feature: Support live peer list update (#51) * created InitializePeer and ClosePeerConnection functions * feature: simplify peer stopping * chore: remove unused code * feature: basic management service implementation (#44) * feat: basic management service implementation [FAILING TESTS] * test: fix healthcheck test * test: #39 add peer registration endpoint test * feat: #39 add setup key handling * feat: #39 add peer management store persistence * refactor: extract config read/write to the utility package * refactor: move file contents copy to the utility package * refactor: use Accounts instead of Users in the Store * feature: add management server Docker file * refactor: introduce datadir instead of config * chore: use filepath.Join to concat filepaths instead of string concat * refactor: move stop channel to the root * refactor: move stop channel to the root * review: fix PR review notes Co-authored-by: braginini <hello@wiretrustee.com> * Handle read config file errors * feature: add letsencrypt support to the management service * fix: lint warnings * chore: change default datadir * refactor: set default flags in code not Dockerfile * chore: remove unused code * Added RemovePeer and centralized configureDevice code * remove peer from the wg interface when closing proxy * remove config file * add iface tests * fix tests, validate if file exists before removing it * removed unused functions UpdateListenPort and ConfigureWithKeyGen * Ensure we don't wait for timeout when closing * Rename ClosePeerConnection to RemovePeerConnection * Avoid returning on uapi Accept failures * Added engine tests * Remove extra add address code * Adding iface.Close * Ensure Close the interface and disable parallel test execution * check err var when listing interfaces * chore: add synchronisation to peer management * chore: add connection status to track peer connection * refactor: remove unused code Co-authored-by: braginini <hello@wiretrustee.com> Co-authored-by: Mikhail Bragin <bangvalo@gmail.com>
2021-07-19 15:02:11 +02:00
}
return nil
}
func signalCandidate(candidate ice.Candidate, myKey wgtypes.Key, remoteKey wgtypes.Key, s signal.Client) error {
2021-05-01 12:45:37 +02:00
err := s.Send(&sProto.Message{
Key: myKey.PublicKey().String(),
RemoteKey: remoteKey.String(),
Body: &sProto.Body{
Type: sProto.Body_CANDIDATE,
Payload: candidate.Marshal(),
},
2021-05-01 12:45:37 +02:00
})
if err != nil {
return err
}
return nil
}
func sendSignal(message *sProto.Message, s signal.Client) error {
return s.Send(message)
}
// SignalOfferAnswer signals either an offer or an answer to remote peer
func SignalOfferAnswer(offerAnswer peer.OfferAnswer, myKey wgtypes.Key, remoteKey wgtypes.Key, s signal.Client,
isAnswer bool) error {
var t sProto.Body_Type
2021-05-01 12:45:37 +02:00
if isAnswer {
t = sProto.Body_ANSWER
2021-05-01 12:45:37 +02:00
} else {
t = sProto.Body_OFFER
2021-05-01 12:45:37 +02:00
}
msg, err := signal.MarshalCredential(myKey, offerAnswer.WgListenPort, remoteKey, &signal.Credential{
UFrag: offerAnswer.IceCredentials.UFrag,
Pwd: offerAnswer.IceCredentials.Pwd,
}, t, offerAnswer.RosenpassPubKey, offerAnswer.RosenpassAddr)
if err != nil {
return err
}
err = s.Send(msg)
2021-05-01 12:45:37 +02:00
if err != nil {
return err
}
return nil
}
func (e *Engine) handleSync(update *mgmProto.SyncResponse) error {
e.syncMsgMux.Lock()
defer e.syncMsgMux.Unlock()
if update.GetWiretrusteeConfig() != nil {
err := e.updateTURNs(update.GetWiretrusteeConfig().GetTurns())
if err != nil {
return err
}
err = e.updateSTUNs(update.GetWiretrusteeConfig().GetStuns())
if err != nil {
return err
}
// todo update signal
}
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
if err := e.updateChecksIfNew(update.Checks); err != nil {
return err
}
if update.GetNetworkMap() != nil {
// only apply new changes and ignore old ones
err := e.updateNetworkMap(update.GetNetworkMap())
if err != nil {
return err
}
}
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
return nil
}
// updateChecksIfNew updates checks if there are changes and sync new meta with management
func (e *Engine) updateChecksIfNew(checks []*mgmProto.Checks) error {
// if checks are equal, we skip the update
if isChecksEqual(e.checks, checks) {
return nil
}
e.checks = checks
info, err := system.GetInfoWithChecks(e.ctx, checks)
if err != nil {
log.Warnf("failed to get system info with checks: %v", err)
info = system.GetInfo(e.ctx)
}
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
if err := e.mgmClient.SyncMeta(info); err != nil {
log.Errorf("could not sync meta: error %s", err)
return err
}
return nil
}
func isNil(server nbssh.Server) bool {
return server == nil || reflect.ValueOf(server).IsNil()
}
func (e *Engine) updateSSH(sshConf *mgmProto.SSHConfig) error {
if !e.config.ServerSSHAllowed {
log.Warnf("running SSH server is not permitted")
return nil
} else {
if sshConf.GetSshEnabled() {
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
if runtime.GOOS == "windows" || runtime.GOOS == "freebsd" {
log.Warnf("running SSH server on %s is not supported", runtime.GOOS)
return nil
}
// start SSH server if it wasn't running
if isNil(e.sshServer) {
// nil sshServer means it has not yet been started
var err error
e.sshServer, err = e.sshServerFunc(e.config.SSHKey,
fmt.Sprintf("%s:%d", e.wgInterface.Address().IP.String(), nbssh.DefaultSSHPort))
if err != nil {
return err
}
go func() {
// blocking
err = e.sshServer.Start()
if err != nil {
// will throw error when we stop it even if it is a graceful stop
log.Debugf("stopped SSH server with error %v", err)
}
e.syncMsgMux.Lock()
defer e.syncMsgMux.Unlock()
e.sshServer = nil
log.Infof("stopped SSH server")
}()
} else {
log.Debugf("SSH server is already running")
}
} else if !isNil(e.sshServer) {
// Disable SSH server request, so stop it if it was running
err := e.sshServer.Stop()
if err != nil {
log.Warnf("failed to stop SSH server %v", err)
}
e.sshServer = nil
}
return nil
}
}
func (e *Engine) updateConfig(conf *mgmProto.PeerConfig) error {
if e.wgInterface.Address().String() != conf.Address {
oldAddr := e.wgInterface.Address().String()
log.Debugf("updating peer address from %s to %s", oldAddr, conf.Address)
err := e.wgInterface.UpdateAddr(conf.Address)
if err != nil {
return err
}
e.config.WgAddr = conf.Address
log.Infof("updated peer address from %s to %s", oldAddr, conf.Address)
}
if conf.GetSshConfig() != nil {
err := e.updateSSH(conf.GetSshConfig())
if err != nil {
log.Warnf("failed handling SSH server setup %v", err)
}
}
e.statusRecorder.UpdateLocalPeerState(peer.LocalPeerState{
IP: e.config.WgAddr,
PubKey: e.config.WgPrivateKey.PublicKey().String(),
KernelInterface: iface.WireGuardModuleIsLoaded(),
FQDN: conf.GetFqdn(),
})
return nil
}
// receiveManagementEvents connects to the Management Service event stream to receive updates from the management service
// E.g. when a new peer has been registered and we are allowed to connect to it.
func (e *Engine) receiveManagementEvents() {
go func() {
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
info, err := system.GetInfoWithChecks(e.ctx, e.checks)
if err != nil {
log.Warnf("failed to get system info with checks: %v", err)
info = system.GetInfo(e.ctx)
}
// err = e.mgmClient.Sync(info, e.handleSync)
err = e.mgmClient.Sync(e.ctx, info, e.handleSync)
if err != nil {
// happens if management is unavailable for a long time.
// We want to cancel the operation of the whole client
_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
e.clientCancel()
return
}
log.Debugf("stopped receiving updates from Management Service")
}()
log.Debugf("connecting to Management Service updates stream")
}
func (e *Engine) updateSTUNs(stuns []*mgmProto.HostConfig) error {
if len(stuns) == 0 {
return nil
}
var newSTUNs []*stun.URI
log.Debugf("got STUNs update from Management Service, updating")
for _, s := range stuns {
url, err := stun.ParseURI(s.Uri)
if err != nil {
return err
}
newSTUNs = append(newSTUNs, url)
}
e.STUNs = newSTUNs
return nil
}
func (e *Engine) updateTURNs(turns []*mgmProto.ProtectedHostConfig) error {
if len(turns) == 0 {
return nil
}
var newTURNs []*stun.URI
log.Debugf("got TURNs update from Management Service, updating")
for _, turn := range turns {
url, err := stun.ParseURI(turn.HostConfig.Uri)
if err != nil {
return err
}
url.Username = turn.User
url.Password = turn.Password
newTURNs = append(newTURNs, url)
}
e.TURNs = newTURNs
return nil
}
func (e *Engine) updateNetworkMap(networkMap *mgmProto.NetworkMap) error {
// intentionally leave it before checking serial because for now it can happen that peer IP changed but serial didn't
if networkMap.GetPeerConfig() != nil {
err := e.updateConfig(networkMap.GetPeerConfig())
if err != nil {
return err
}
}
serial := networkMap.GetSerial()
if e.networkSerial > serial {
log.Debugf("received outdated NetworkMap with serial %d, ignoring", serial)
return nil
}
2024-06-19 12:12:11 +02:00
protoRoutes := networkMap.GetRoutes()
if protoRoutes == nil {
protoRoutes = []*mgmProto.Route{}
}
_, clientRoutes, err := e.routeManager.UpdateRoutes(serial, toRoutes(protoRoutes))
if err != nil {
log.Errorf("failed to update clientRoutes, err: %v", err)
}
e.clientRoutesMu.Lock()
e.clientRoutes = clientRoutes
e.clientRoutesMu.Unlock()
log.Debugf("got peers update from Management Service, total peers to connect to = %d", len(networkMap.GetRemotePeers()))
e.updateOfflinePeers(networkMap.GetOfflinePeers())
// cleanup request, most likely our peer has been deleted
if networkMap.GetRemotePeersIsEmpty() {
err := e.removeAllPeers()
e.statusRecorder.FinishPeerListModifications()
if err != nil {
return err
}
} else {
err := e.removePeers(networkMap.GetRemotePeers())
if err != nil {
return err
}
err = e.modifyPeers(networkMap.GetRemotePeers())
if err != nil {
return err
}
err = e.addNewPeers(networkMap.GetRemotePeers())
if err != nil {
return err
}
e.statusRecorder.FinishPeerListModifications()
// update SSHServer by adding remote peer SSH keys
if !isNil(e.sshServer) {
for _, config := range networkMap.GetRemotePeers() {
if config.GetSshConfig() != nil && config.GetSshConfig().GetSshPubKey() != nil {
err := e.sshServer.AddAuthorizedKey(config.WgPubKey, string(config.GetSshConfig().GetSshPubKey()))
if err != nil {
log.Warnf("failed adding authorized key to SSH DefaultServer %v", err)
}
}
}
}
}
protoDNSConfig := networkMap.GetDNSConfig()
if protoDNSConfig == nil {
protoDNSConfig = &mgmProto.DNSConfig{}
}
err = e.dnsServer.UpdateDNSServer(serial, toDNSConfig(protoDNSConfig))
if err != nil {
log.Errorf("failed to update dns server, err: %v", err)
}
if e.acl != nil {
e.acl.ApplyFiltering(networkMap)
}
e.networkSerial = serial
// Test received (upstream) servers for availability right away instead of upon usage.
// If no server of a server group responds this will disable the respective handler and retry later.
e.dnsServer.ProbeAvailability()
return nil
}
func toRoutes(protoRoutes []*mgmProto.Route) []*route.Route {
routes := make([]*route.Route, 0)
for _, protoRoute := range protoRoutes {
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
var prefix netip.Prefix
if len(protoRoute.Domains) == 0 {
var err error
if prefix, err = netip.ParsePrefix(protoRoute.Network); err != nil {
log.Errorf("Failed to parse prefix %s: %v", protoRoute.Network, err)
continue
}
}
convertedRoute := &route.Route{
2024-05-06 14:47:49 +02:00
ID: route.ID(protoRoute.ID),
Network: prefix,
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
Domains: domain.FromPunycodeList(protoRoute.Domains),
2024-05-06 14:47:49 +02:00
NetID: route.NetID(protoRoute.NetID),
NetworkType: route.NetworkType(protoRoute.NetworkType),
Peer: protoRoute.Peer,
Metric: int(protoRoute.Metric),
Masquerade: protoRoute.Masquerade,
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
KeepRoute: protoRoute.KeepRoute,
}
routes = append(routes, convertedRoute)
}
return routes
}
func toDNSConfig(protoDNSConfig *mgmProto.DNSConfig) nbdns.Config {
dnsUpdate := nbdns.Config{
ServiceEnable: protoDNSConfig.GetServiceEnable(),
CustomZones: make([]nbdns.CustomZone, 0),
NameServerGroups: make([]*nbdns.NameServerGroup, 0),
}
for _, zone := range protoDNSConfig.GetCustomZones() {
dnsZone := nbdns.CustomZone{
Domain: zone.GetDomain(),
}
for _, record := range zone.Records {
dnsRecord := nbdns.SimpleRecord{
Name: record.GetName(),
Type: int(record.GetType()),
Class: record.GetClass(),
TTL: int(record.GetTTL()),
RData: record.GetRData(),
}
dnsZone.Records = append(dnsZone.Records, dnsRecord)
}
dnsUpdate.CustomZones = append(dnsUpdate.CustomZones, dnsZone)
}
for _, nsGroup := range protoDNSConfig.GetNameServerGroups() {
dnsNSGroup := &nbdns.NameServerGroup{
Primary: nsGroup.GetPrimary(),
Domains: nsGroup.GetDomains(),
SearchDomainsEnabled: nsGroup.GetSearchDomainsEnabled(),
}
for _, ns := range nsGroup.GetNameServers() {
dnsNS := nbdns.NameServer{
IP: netip.MustParseAddr(ns.GetIP()),
NSType: nbdns.NameServerType(ns.GetNSType()),
Port: int(ns.GetPort()),
}
dnsNSGroup.NameServers = append(dnsNSGroup.NameServers, dnsNS)
}
dnsUpdate.NameServerGroups = append(dnsUpdate.NameServerGroups, dnsNSGroup)
}
return dnsUpdate
}
func (e *Engine) updateOfflinePeers(offlinePeers []*mgmProto.RemotePeerConfig) {
replacement := make([]peer.State, len(offlinePeers))
for i, offlinePeer := range offlinePeers {
log.Debugf("added offline peer %s", offlinePeer.Fqdn)
replacement[i] = peer.State{
IP: strings.Join(offlinePeer.GetAllowedIps(), ","),
PubKey: offlinePeer.GetWgPubKey(),
FQDN: offlinePeer.GetFqdn(),
ConnStatus: peer.StatusDisconnected,
ConnStatusUpdate: time.Now(),
Mux: new(sync.RWMutex),
}
}
e.statusRecorder.ReplaceOfflinePeers(replacement)
}
// addNewPeers adds peers that were not know before but arrived from the Management service with the update
func (e *Engine) addNewPeers(peersUpdate []*mgmProto.RemotePeerConfig) error {
for _, p := range peersUpdate {
err := e.addNewPeer(p)
if err != nil {
return err
}
}
return nil
}
// addNewPeer add peer if connection doesn't exist
func (e *Engine) addNewPeer(peerConfig *mgmProto.RemotePeerConfig) error {
peerKey := peerConfig.GetWgPubKey()
peerIPs := peerConfig.GetAllowedIps()
if _, ok := e.peerConns[peerKey]; !ok {
conn, err := e.createPeerConn(peerKey, strings.Join(peerIPs, ","))
if err != nil {
return fmt.Errorf("create peer connection: %w", err)
}
e.peerConns[peerKey] = conn
if e.beforePeerHook != nil && e.afterPeerHook != nil {
conn.AddBeforeAddPeerHook(e.beforePeerHook)
conn.AddAfterRemovePeerHook(e.afterPeerHook)
}
err = e.statusRecorder.AddPeer(peerKey, peerConfig.Fqdn)
2022-07-02 12:02:17 +02:00
if err != nil {
log.Warnf("error adding peer %s to status recorder, got error: %v", peerKey, err)
}
e.wgConnWorker.Add(1)
go e.connWorker(conn, peerKey)
}
return nil
}
func (e *Engine) connWorker(conn *peer.Conn, peerKey string) {
defer e.wgConnWorker.Done()
for {
// randomize starting time a bit
min := 500
max := 2000
duration := time.Duration(rand.Intn(max-min)+min) * time.Millisecond
select {
case <-e.ctx.Done():
return
case <-time.After(duration):
}
// if peer has been removed -> give up
if !e.peerExists(peerKey) {
log.Debugf("peer %s doesn't exist anymore, won't retry connection", peerKey)
return
}
if !e.signal.Ready() {
log.Infof("signal client isn't ready, skipping connection attempt %s", peerKey)
continue
}
// we might have received new STUN and TURN servers meanwhile, so update them
e.syncMsgMux.Lock()
conn.UpdateStunTurn(append(e.STUNs, e.TURNs...))
e.syncMsgMux.Unlock()
err := conn.Open(e.ctx)
if err != nil {
log.Debugf("connection to peer %s failed: %v", peerKey, err)
var connectionClosedError *peer.ConnectionClosedError
switch {
case errors.As(err, &connectionClosedError):
// conn has been forced to close, so we exit the loop
return
default:
}
}
}
}
func (e *Engine) peerExists(peerKey string) bool {
e.syncMsgMux.Lock()
defer e.syncMsgMux.Unlock()
_, ok := e.peerConns[peerKey]
return ok
}
func (e *Engine) createPeerConn(pubKey string, allowedIPs string) (*peer.Conn, error) {
log.Debugf("creating peer connection %s", pubKey)
var stunTurn []*stun.URI
stunTurn = append(stunTurn, e.STUNs...)
stunTurn = append(stunTurn, e.TURNs...)
wgConfig := peer.WgConfig{
RemoteKey: pubKey,
WgListenPort: e.config.WgPort,
Refactor Interface package and update windows driver (#192) * script to generate syso files * test wireguard-windows driver package * set int log * add windows test * add windows test * verbose bash * use cd * move checkout * exit 0 * removed tty flag * artifact path * fix tags and add cache * fix cache * fix cache * test dir * restore artifacts in the root * try dll file * try dll file * copy dll * typo in copy dll * compile test * checkout first * updated cicd * fix add address issue and gen GUID * psexec typo * accept eula * mod tidy before tests * regular test exec and verbose test with psexec * test all * return WGInterface Interface * use WgIfaceName and timeout after 30 seconds * different ports and validate connect 2 peers * Use time.After for timeout and close interface * Use time.After for testing connect peers * WG Interface struct * Update engine and parse address * refactor Linux create and assignAddress * NewWGIface and configuration methods * Update proxy with interface methods * update up command test * resolve lint warnings * remove psexec test * close copied files * add goos before build * run tests on mac,windows and linux * cache by testing os * run on push * fix indentation * adjust test timeouts * remove parallel flag * mod tidy before test * ignore syso files * removed functions and renamed vars * different IPs for connect peers test * Generate syso with DLL * Single Close method * use port from test constant * test: remove wireguard interfaces after finishing engine test * use load_wgnt_from_rsrc Co-authored-by: braginini <bangvalo@gmail.com>
2022-01-17 14:01:58 +01:00
WgInterface: e.wgInterface,
AllowedIps: allowedIPs,
PreSharedKey: e.config.PreSharedKey,
}
if e.config.RosenpassEnabled && !e.config.RosenpassPermissive {
lk := []byte(e.config.WgPrivateKey.PublicKey().String())
rk := []byte(wgConfig.RemoteKey)
var keyInput []byte
if string(lk) > string(rk) {
//nolint:gocritic
keyInput = append(lk[:16], rk[:16]...)
} else {
//nolint:gocritic
keyInput = append(rk[:16], lk[:16]...)
}
key, err := wgtypes.NewKey(keyInput)
if err != nil {
return nil, err
}
wgConfig.PreSharedKey = &key
}
// randomize connection timeout
timeout := time.Duration(rand.Intn(PeerConnectionTimeoutMax-PeerConnectionTimeoutMin)+PeerConnectionTimeoutMin) * time.Millisecond
config := peer.ConnConfig{
Key: pubKey,
LocalKey: e.config.WgPrivateKey.PublicKey().String(),
StunTurn: stunTurn,
InterfaceBlackList: e.config.IFaceBlackList,
DisableIPv6Discovery: e.config.DisableIPv6Discovery,
Timeout: timeout,
UDPMux: e.udpMux.UDPMuxDefault,
UDPMuxSrflx: e.udpMux,
WgConfig: wgConfig,
LocalWgPort: e.config.WgPort,
NATExternalIPs: e.parseNATExternalIPMappings(),
RosenpassPubKey: e.getRosenpassPubKey(),
RosenpassAddr: e.getRosenpassAddr(),
}
peerConn, err := peer.NewConn(config, e.statusRecorder, e.wgProxyFactory, e.mobileDep.TunAdapter, e.mobileDep.IFaceDiscover)
if err != nil {
return nil, err
}
wgPubKey, err := wgtypes.ParseKey(pubKey)
if err != nil {
return nil, err
}
signalOffer := func(offerAnswer peer.OfferAnswer) error {
return SignalOfferAnswer(offerAnswer, e.config.WgPrivateKey, wgPubKey, e.signal, false)
}
signalCandidate := func(candidate ice.Candidate) error {
return signalCandidate(candidate, e.config.WgPrivateKey, wgPubKey, e.signal)
}
signalAnswer := func(offerAnswer peer.OfferAnswer) error {
return SignalOfferAnswer(offerAnswer, e.config.WgPrivateKey, wgPubKey, e.signal, true)
}
peerConn.SetSignalCandidate(signalCandidate)
peerConn.SetSignalOffer(signalOffer)
peerConn.SetSignalAnswer(signalAnswer)
peerConn.SetSendSignalMessage(func(message *sProto.Message) error {
return sendSignal(message, e.signal)
})
if e.rpManager != nil {
peerConn.SetOnConnected(e.rpManager.OnConnected)
peerConn.SetOnDisconnected(e.rpManager.OnDisconnected)
}
return peerConn, nil
}
// receiveSignalEvents connects to the Signal Service event stream to negotiate connection with remote peers
func (e *Engine) receiveSignalEvents() {
go func() {
// connect to a stream of messages coming from the signal server
err := e.signal.Receive(e.ctx, func(msg *sProto.Message) error {
e.syncMsgMux.Lock()
defer e.syncMsgMux.Unlock()
2021-05-01 12:45:37 +02:00
conn := e.peerConns[msg.Key]
if conn == nil {
return fmt.Errorf("wrongly addressed message %s", msg.Key)
2021-05-01 12:45:37 +02:00
}
switch msg.GetBody().Type {
case sProto.Body_OFFER:
remoteCred, err := signal.UnMarshalCredential(msg)
if err != nil {
return err
}
var rosenpassPubKey []byte
rosenpassAddr := ""
if msg.GetBody().GetRosenpassConfig() != nil {
rosenpassPubKey = msg.GetBody().GetRosenpassConfig().GetRosenpassPubKey()
rosenpassAddr = msg.GetBody().GetRosenpassConfig().GetRosenpassServerAddr()
}
conn.OnRemoteOffer(peer.OfferAnswer{
IceCredentials: peer.IceCredentials{
UFrag: remoteCred.UFrag,
Pwd: remoteCred.Pwd,
},
WgListenPort: int(msg.GetBody().GetWgListenPort()),
Version: msg.GetBody().GetNetBirdVersion(),
RosenpassPubKey: rosenpassPubKey,
RosenpassAddr: rosenpassAddr,
})
case sProto.Body_ANSWER:
remoteCred, err := signal.UnMarshalCredential(msg)
if err != nil {
return err
}
var rosenpassPubKey []byte
rosenpassAddr := ""
if msg.GetBody().GetRosenpassConfig() != nil {
rosenpassPubKey = msg.GetBody().GetRosenpassConfig().GetRosenpassPubKey()
rosenpassAddr = msg.GetBody().GetRosenpassConfig().GetRosenpassServerAddr()
}
conn.OnRemoteAnswer(peer.OfferAnswer{
IceCredentials: peer.IceCredentials{
UFrag: remoteCred.UFrag,
Pwd: remoteCred.Pwd,
},
WgListenPort: int(msg.GetBody().GetWgListenPort()),
Version: msg.GetBody().GetNetBirdVersion(),
RosenpassPubKey: rosenpassPubKey,
RosenpassAddr: rosenpassAddr,
})
case sProto.Body_CANDIDATE:
candidate, err := ice.UnmarshalCandidate(msg.GetBody().Payload)
if err != nil {
log.Errorf("failed on parsing remote candidate %s -> %s", candidate, err)
return err
}
conn.OnRemoteCandidate(candidate, e.GetClientRoutes())
case sProto.Body_MODE:
2021-05-01 12:45:37 +02:00
}
return nil
})
if err != nil {
// happens if signal is unavailable for a long time.
// We want to cancel the operation of the whole client
_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
e.clientCancel()
return
}
}()
2021-05-01 12:45:37 +02:00
e.signal.WaitStreamConnected()
2021-05-01 12:45:37 +02:00
}
func (e *Engine) parseNATExternalIPMappings() []string {
var mappedIPs []string
var ignoredIFaces = make(map[string]interface{})
for _, iFace := range e.config.IFaceBlackList {
ignoredIFaces[iFace] = nil
}
for _, mapping := range e.config.NATExternalIPs {
var external, internal string
var externalIP, internalIP net.IP
var err error
split := strings.Split(mapping, "/")
if len(split) > 2 {
log.Warnf("ignoring invalid external mapping '%s', too many delimiters", mapping)
break
}
if len(split) > 1 {
internal = split[1]
internalIP = net.ParseIP(internal)
if internalIP == nil {
// not a properly formatted IP address, maybe it's interface name?
if _, present := ignoredIFaces[internal]; present {
log.Warnf("internal interface '%s' in blacklist, ignoring external mapping '%s'", internal, mapping)
break
}
internalIP, err = findIPFromInterfaceName(internal)
if err != nil {
log.Warnf("error finding interface IP for interface '%s', ignoring external mapping '%s': %v", internal, mapping, err)
break
}
}
}
external = split[0]
externalIP = net.ParseIP(external)
if externalIP == nil {
log.Warnf("invalid external IP, %s, ignoring external IP mapping '%s'", external, mapping)
break
}
mappedIP := externalIP.String()
if internalIP != nil {
mappedIP = mappedIP + "/" + internalIP.String()
}
mappedIPs = append(mappedIPs, mappedIP)
log.Infof("parsed external IP mapping of '%s' as '%s'", mapping, mappedIP)
}
if len(mappedIPs) != len(e.config.NATExternalIPs) {
log.Warnf("one or more external IP mappings failed to parse, ignoring all mappings")
return nil
}
return mappedIPs
}
func (e *Engine) close() {
if e.wgProxyFactory != nil {
if err := e.wgProxyFactory.Free(); err != nil {
log.Errorf("failed closing ebpf proxy: %s", err)
}
}
// stop/restore DNS first so dbus and friends don't complain because of a missing interface
if e.dnsServer != nil {
e.dnsServer.Stop()
e.dnsServer = nil
}
if e.routeManager != nil {
e.routeManager.Stop()
}
log.Debugf("removing Netbird interface %s", e.config.WgIfaceName)
if e.wgInterface != nil {
if err := e.wgInterface.Close(); err != nil {
log.Errorf("failed closing Netbird interface %s %v", e.config.WgIfaceName, err)
}
}
if !isNil(e.sshServer) {
err := e.sshServer.Stop()
if err != nil {
log.Warnf("failed stopping the SSH server: %v", err)
}
}
if e.firewall != nil {
err := e.firewall.Reset()
if err != nil {
log.Warnf("failed to reset firewall: %s", err)
}
}
if e.rpManager != nil {
_ = e.rpManager.Close()
}
}
func (e *Engine) readInitialSettings() ([]*route.Route, *nbdns.Config, error) {
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
info := system.GetInfo(e.ctx)
netMap, err := e.mgmClient.GetNetworkMap(info)
if err != nil {
return nil, nil, err
}
routes := toRoutes(netMap.GetRoutes())
dnsCfg := toDNSConfig(netMap.GetDNSConfig())
return routes, &dnsCfg, nil
}
func (e *Engine) newWgIface() (*iface.WGIface, error) {
transportNet, err := e.newStdNet()
if err != nil {
log.Errorf("failed to create pion's stdnet: %s", err)
}
var mArgs *iface.MobileIFaceArguments
switch runtime.GOOS {
case "android":
mArgs = &iface.MobileIFaceArguments{
TunAdapter: e.mobileDep.TunAdapter,
TunFd: int(e.mobileDep.FileDescriptor),
}
case "ios":
mArgs = &iface.MobileIFaceArguments{
TunFd: int(e.mobileDep.FileDescriptor),
}
default:
}
2024-06-19 12:12:11 +02:00
return iface.NewWGIFace(e.config.WgIfaceName, e.config.WgAddr, e.config.WgPort, e.config.WgPrivateKey.String(), iface.DefaultMTU, transportNet, mArgs, e.addrViaRoutes)
}
func (e *Engine) wgInterfaceCreate() (err error) {
switch runtime.GOOS {
case "android":
err = e.wgInterface.CreateOnAndroid(e.routeManager.InitialRouteRange(), e.dnsServer.DnsIP(), e.dnsServer.SearchDomains())
case "ios":
e.mobileDep.NetworkChangeListener.SetInterfaceIP(e.config.WgAddr)
err = e.wgInterface.Create()
default:
err = e.wgInterface.Create()
}
return err
}
func (e *Engine) newDnsServer() ([]*route.Route, dns.Server, error) {
// due to tests where we are using a mocked version of the DNS server
if e.dnsServer != nil {
return nil, e.dnsServer, nil
}
switch runtime.GOOS {
case "android":
routes, dnsConfig, err := e.readInitialSettings()
if err != nil {
return nil, nil, err
}
dnsServer := dns.NewDefaultServerPermanentUpstream(
e.ctx,
e.wgInterface,
e.mobileDep.HostDNSAddresses,
*dnsConfig,
e.mobileDep.NetworkChangeListener,
e.statusRecorder,
)
go e.mobileDep.DnsReadyListener.OnReady()
return routes, dnsServer, nil
case "ios":
dnsServer := dns.NewDefaultServerIos(e.ctx, e.wgInterface, e.mobileDep.DnsManager, e.statusRecorder)
return nil, dnsServer, nil
default:
dnsServer, err := dns.NewDefaultServer(e.ctx, e.wgInterface, e.config.CustomDNSAddress, e.statusRecorder)
if err != nil {
return nil, nil, err
}
return nil, dnsServer, nil
}
}
// GetClientRoutes returns the current routes from the route map
2024-05-06 14:47:49 +02:00
func (e *Engine) GetClientRoutes() route.HAMap {
e.clientRoutesMu.RLock()
defer e.clientRoutesMu.RUnlock()
return maps.Clone(e.clientRoutes)
}
// GetClientRoutesWithNetID returns the current routes from the route map, but the keys consist of the network ID only
2024-05-06 14:47:49 +02:00
func (e *Engine) GetClientRoutesWithNetID() map[route.NetID][]*route.Route {
e.clientRoutesMu.RLock()
defer e.clientRoutesMu.RUnlock()
2024-05-06 14:47:49 +02:00
routes := make(map[route.NetID][]*route.Route, len(e.clientRoutes))
for id, v := range e.clientRoutes {
2024-05-06 14:47:49 +02:00
routes[id.NetID()] = v
}
return routes
}
// GetRouteManager returns the route manager
func (e *Engine) GetRouteManager() routemanager.Manager {
return e.routeManager
}
func findIPFromInterfaceName(ifaceName string) (net.IP, error) {
iface, err := net.InterfaceByName(ifaceName)
if err != nil {
return nil, err
}
return findIPFromInterface(iface)
}
func findIPFromInterface(iface *net.Interface) (net.IP, error) {
ifaceAddrs, err := iface.Addrs()
if err != nil {
return nil, err
}
for _, addr := range ifaceAddrs {
if ipv4Addr := addr.(*net.IPNet).IP.To4(); ipv4Addr != nil {
return ipv4Addr, nil
}
}
return nil, fmt.Errorf("interface %s don't have an ipv4 address", iface.Name)
}
func (e *Engine) getRosenpassPubKey() []byte {
if e.rpManager != nil {
return e.rpManager.GetPubKey()
}
return nil
}
func (e *Engine) getRosenpassAddr() string {
if e.rpManager != nil {
return e.rpManager.GetAddress().String()
}
return ""
}
func (e *Engine) receiveProbeEvents() {
if e.signalProbe != nil {
go e.signalProbe.Receive(e.ctx, func() bool {
healthy := e.signal.IsHealthy()
log.Debugf("received signal probe request, healthy: %t", healthy)
return healthy
})
}
if e.mgmProbe != nil {
go e.mgmProbe.Receive(e.ctx, func() bool {
healthy := e.mgmClient.IsHealthy()
log.Debugf("received management probe request, healthy: %t", healthy)
return healthy
})
}
if e.relayProbe != nil {
go e.relayProbe.Receive(e.ctx, func() bool {
healthy := true
results := append(e.probeSTUNs(), e.probeTURNs()...)
e.statusRecorder.UpdateRelayStates(results)
// A single failed server will result in a "failed" probe
for _, res := range results {
if res.Err != nil {
healthy = false
break
}
}
log.Debugf("received relay probe request, healthy: %t", healthy)
return healthy
})
}
if e.wgProbe != nil {
go e.wgProbe.Receive(e.ctx, func() bool {
log.Debug("received wg probe request")
for _, peer := range e.peerConns {
key := peer.GetKey()
wgStats, err := peer.GetConf().WgConfig.WgInterface.GetStats(key)
if err != nil {
log.Debugf("failed to get wg stats for peer %s: %s", key, err)
}
// wgStats could be zero value, in which case we just reset the stats
if err := e.statusRecorder.UpdateWireGuardPeerState(key, wgStats); err != nil {
log.Debugf("failed to update wg stats for peer %s: %s", key, err)
}
}
return true
})
}
}
func (e *Engine) probeSTUNs() []relay.ProbeResult {
return relay.ProbeAll(e.ctx, relay.ProbeSTUN, e.STUNs)
}
func (e *Engine) probeTURNs() []relay.ProbeResult {
return relay.ProbeAll(e.ctx, relay.ProbeTURN, e.TURNs)
}
func (e *Engine) startNetworkMonitor() {
if !e.config.NetworkMonitor {
log.Infof("Network monitor is disabled, not starting")
return
}
e.networkMonitor = networkmonitor.New()
go func() {
err := e.networkMonitor.Start(e.ctx, func() {
log.Infof("Network monitor detected network change, restarting engine")
if err := e.Stop(); err != nil {
log.Errorf("Failed to stop engine: %v", err)
}
if err := e.Start(); err != nil {
log.Errorf("Failed to start engine: %v", err)
}
})
if err != nil && !errors.Is(err, networkmonitor.ErrStopped) {
log.Errorf("Network monitor: %v", err)
}
}()
}
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
2024-06-19 12:12:11 +02:00
func (e *Engine) addrViaRoutes(addr netip.Addr) (bool, netip.Prefix, error) {
var vpnRoutes []netip.Prefix
for _, routes := range e.GetClientRoutes() {
if len(routes) > 0 && routes[0] != nil {
vpnRoutes = append(vpnRoutes, routes[0].Network)
}
}
if isVpn, prefix := systemops.IsAddrRouted(addr, vpnRoutes); isVpn {
return true, prefix, nil
}
return false, netip.Prefix{}, nil
}
Release 0.28.0 (#2092) * compile client under freebsd (#1620) Compile netbird client under freebsd and now support netstack and userspace modes. Refactoring linux specific code to share same code with FreeBSD, move to *_unix.go files. Not implemented yet: Kernel mode not supported DNS probably does not work yet Routing also probably does not work yet SSH support did not tested yet Lack of test environment for freebsd (dedicated VM for github runners under FreeBSD required) Lack of tests for freebsd specific code info reporting need to review and also implement, for example OS reported as GENERIC instead of FreeBSD (lack of FreeBSD icon in management interface) Lack of proper client setup under FreeBSD Lack of FreeBSD port/package * Add DNS routes (#1943) Given domains are resolved periodically and resolved IPs are replaced with the new ones. Unless the flag keep_route is set to true, then only new ones are added. This option is helpful if there are long-running connections that might still point to old IP addresses from changed DNS records. * Add process posture check (#1693) Introduces a process posture check to validate the existence and active status of specific binaries on peer systems. The check ensures that files are present at specified paths, and that corresponding processes are running. This check supports Linux, Windows, and macOS systems. Co-authored-by: Evgenii <mail@skillcoder.com> Co-authored-by: Pascal Fischer <pascal@netbird.io> Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com> Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com> Co-authored-by: Bethuel Mmbaga <bethuelmbaga12@gmail.com>
2024-06-13 13:24:24 +02:00
// isChecksEqual checks if two slices of checks are equal.
func isChecksEqual(checks []*mgmProto.Checks, oChecks []*mgmProto.Checks) bool {
return slices.EqualFunc(checks, oChecks, func(checks, oChecks *mgmProto.Checks) bool {
return slices.Equal(checks.Files, oChecks.Files)
})
}