Commit Graph

383 Commits

Author SHA1 Message Date
Maycon Santos
ed1872560f
Use the client network for log errors (#455) 2022-09-07 18:26:59 +02:00
Maycon Santos
b63ec71aed
Check if login stream was canceled before printing warn (#451) 2022-09-05 17:44:26 +02:00
Maycon Santos
1012172f04
Add routing peer support (#441)
Handle routes updates from management

Manage routing firewall rules

Manage peer RIB table

Add get peer and get notification channel from the status recorder

Update interface peers allowed IPs
2022-09-05 09:06:35 +02:00
Maycon Santos
4e5ee70b3d
Load WgPort from config file and exchange via signal (#449)
Added additional common blacklisted interfaces

Updated the signal protocol to pass the peer port and netbird version

Co-authored-by: braginini <bangvalo@gmail.com>
2022-09-02 19:33:35 +02:00
Misha Bragin
553a13588b
Free up gRPC client resources on errors (#448) 2022-09-01 18:28:45 +02:00
szakharchenko
e3657610bc
Avoid pulling in management code in client (#437)
Avoid management code import for the legacy port value, hardcoding it
instead (it's literally spelled out in a comment below as well).
2022-08-24 16:30:40 +02:00
Misha Bragin
3def84b111
Support Generic OAuth 2.0 Device Authorization Grant (#433)
Support Generic OAuth 2.0 Device Authorization Grant
as per RFC specification https://www.rfc-editor.org/rfc/rfc8628.
The previous version supported only Auth0 as an IDP backend.
This implementation enables the Interactive SSO Login feature 
for any IDP compatible with the specification, e.g., Keycloak.
2022-08-23 15:46:12 +02:00
Misha Bragin
762a26dcea
Fix Register/Deregister race on Signal (#431)
This PR fixes a race condition that happens
when agents connect to a Signal stream, multiple
times within a short amount of time. Common on
slow and unstable internet connections.
Every time an agent establishes a new connection
to Signal, Signal creates a Stream and writes an entry
to the registry of connected peers storing the stream.
Every time an agent disconnects, Signal removes the
stream from the registry.
Due to unstable connections, the agent could detect
a broken connection, and attempt to reconnect to Signal.
Signal will override the stream, but it might detect
the old broken connection later, causing peer deregistration.
It will deregister the peer leaving the client thinking
it is still connected, rejecting any messages.
2022-08-22 12:21:19 +02:00
Maycon Santos
4b34a6d6df
Add routing support to management service (#424)
Management will receive and store routes that are associated with a peer ID.
The routes are distributed to peers according to their ACLs.
2022-08-18 18:22:15 +02:00
Misha Bragin
1be8c16e34
Decrease log level on peer status remove (#410) 2022-08-01 17:52:22 +02:00
Misha Bragin
851de3fd4e
Output NetBird daemon and CLI versions on status command (#408) 2022-08-01 12:42:45 +02:00
Misha Bragin
e34e0ccd12
Check and update Agent's Management URL if is legacy (#406)
All the existing agents by default connect to port 33073 of the
Management service. This value is also stored in the local config.
All the agents won't switch to the new port 443
unless explicitly specified in the config.
We want the transition to be smooth for our users, therefore
this PR adds logic to check whether the old port 33073 can be
changed to 443 and updates the config automatically.
2022-07-30 19:17:18 +02:00
Maycon Santos
d1c2b3d703
Use unix.Uname to get Darwin system info (#404)
This prevents the client from needing to use command line tools
2022-07-30 11:31:27 +02:00
Misha Bragin
966661fe91
Serve Management gRPC and HTTP on a single 80/443 port (#400)
This PR is a part of an effort to use standard ports (443 or 80) that are usually allowed by default in most of the environments.

Right now Management Service runs the Let'sEncrypt manager on port 443, HTTP API server on port 33071,
and a gRPC server on port 33073. There are three separate listeners.
This PR combines these listeners into one.
With this change, the HTTP and gRPC server runs on either 443 with TLS or 80 without TLS
by default (no --port specified).
Let's Encrypt manager always runs on port 443 if enabled.
The backward compatibility server runs on port 33073 (with TLS or without).
HTTP port 33071 is obsolete and not used anymore.

Newly installed agents will connect to port 443 by default instead of port 33073 if not specified otherwise.
2022-07-29 20:37:09 +02:00
Maycon Santos
2555a6c3e8
Use proxy when any candidate is relay (#398)
We should use relayed port when remote or local
candidate is of the relay type
2022-07-27 18:12:39 +02:00
Misha Bragin
275d364df6
Fix TURN credentials renewal (#394)
Update conn config with new TURN credentials

Updated Signal connection timeout to 5s
2022-07-21 22:07:38 +02:00
Maycon Santos
a3c5fa1307
Add PATH to client Dockerfile (#389)
Useful when SSH to client containers
2022-07-12 15:35:51 +02:00
Maycon Santos
75a69ca26b
Write the Admin URL when creating new config (#388) 2022-07-12 15:02:51 +02:00
Misha Bragin
ae8e3ad6fe
Enable SSH Login for docker (#385) 2022-07-07 16:33:16 +02:00
Maycon Santos
ff729f6755
Use id command for user lookup on MacOS (#384)
When building client without CGO, user.Lookup
attempts to get user from /etc/passwd
Which doesn't have the user as MacOS uses
opendirectoryd as user directory
2022-07-07 16:13:46 +02:00
Maycon Santos
7e1b20da5d
Always initialize status recorder (#383)
Always initialize the status recorder

Utilize proto methods to get pbFullStatus values.
2022-07-07 13:54:47 +02:00
Misha Bragin
d4a3ee9d87
Load user profile when SSH (#380)
This PR fixes issues with the terminal when
running netbird ssh to a remote agent.
Every session looks up a user and loads its
profile. If no user is found, the connection is rejected.
The default user is root.
2022-07-07 11:24:38 +02:00
Maycon Santos
49e9113e0f
Enhance status command (#382)
Print peer status from the package

Added --detail flag for detailed status output
2022-07-05 19:47:50 +02:00
Misha Bragin
3bdfa3cc8e
Introduce larger retries for the agent (#379)
The Management client will try reconnecting in case.
of network issues or non-permanent errors.
If the device was off-boarded, then the client will stop retrying.
2022-07-02 20:38:16 +02:00
Maycon Santos
8c953c5a2c
Add client status collection (#368) 2022-07-02 12:02:17 +02:00
Maycon Santos
e95f0f7acb
Support 32 bit (#374)
Add build for 32 bits linux

improved windows test time
2022-07-01 10:42:38 +02:00
Misha Bragin
fa7b413fe7
Fix SSH command on Docker (#377) 2022-06-29 14:03:30 +02:00
Misha Bragin
06860c4c10
NetBird SSH (#361)
This PR adds support for SSH access through the NetBird network
without managing SSH skeys.
NetBird client app has an embedded SSH server (Linux/Mac only) 
and a netbird ssh command.
2022-06-23 17:04:53 +02:00
Maycon Santos
f810feafdf
Expire device flow info on success (#359)
We should expire the device flow
info soon as we get a token with success.
2022-06-09 02:14:31 +02:00
Misha Bragin
e7b43253b0
Fix interface ignore list (#352) 2022-06-05 14:43:13 +02:00
Misha Bragin
fa0399d975
Add more interfaces to ignore (#351) 2022-06-04 20:15:41 +02:00
Misha Bragin
e6e9f0322f
Handle peer interface config change (#348)
Before this change, NetBird Agent wasn't handling
peer interface configuration changes dynamically.
Also, remote peer configuration changes have
not been applied (e.g. AllowedIPs changed).
Not a very common cause, but still it should be handled.
Now, Agent reacts to PeerConfig changes sent from the
management service and restarts remote connections
if AllowedIps have been changed.
2022-06-04 19:41:01 +02:00
Misha Bragin
87631cbc8b
Replace IP allocation logic (#342)
The peer IP allocation logic was allocating sequential peer IP from the 100.64.0.0/10 
address block.
Each account is created with a random subnet from 100.64.0.0/10.
The total amount of potential subnets is 64.
The new logic allocates random peer IP
from the account subnet.
This gives us flexibility to add support for
multi subnet accounts without overlapping IPs.
2022-05-29 22:43:39 +02:00
Maycon Santos
c86bacb5c3
Unblock menu when login (#340)
* GetClientID method and increase interval on slow_down err

* Reuse existing authentication flow if is not expired

Created a new struct to hold additional info
 about the flow

 If there is a waiting sso running, we cancel its context

* Run the up command on a goroutine

* Use time.Until

* Use proper ctx and consistently use goroutine for up/down
2022-05-28 18:37:08 +02:00
Maycon Santos
258cb3d43b
Fix UP calls when state is idle (#338)
* Fix UP calls when state is idle

When we want to login we can call server.Login
It already checks the login status of the peer

* Remove unused status

* Defer close daemon client conn

Co-authored-by: braginini <bangvalo@gmail.com>
2022-05-27 19:16:58 +02:00
Misha Bragin
4088aaf6fe
Pass engine context to management and signal clients (#337) 2022-05-27 15:54:51 +02:00
Maycon Santos
594da0a6b8
Display client's version on UI (#335) 2022-05-27 13:56:12 +02:00
Misha Bragin
889fa646fc
Fix duplicate output of interactive login (#334) 2022-05-27 13:55:24 +02:00
Maycon Santos
3e4b779d7b
Added Netbird as dependency and renamed linux shortcut name (#330) 2022-05-26 15:29:55 +02:00
Misha Bragin
98c764c095
Output message and SSO login URL when netbird up (#331) 2022-05-26 15:26:14 +02:00
Misha Bragin
2c087cd254
Rename Wiretrustee in logs and be log output friendly on startup (#327) 2022-05-26 10:09:11 +02:00
shatoboar
94fbfcdb85
Versioning of UI and grpc-agent for passing version (#324)
Send Desktop UI client version as user-agent to daemon

This is sent on every login request to the management

Parse the GRPC context on the system package and 
retrieves the user-agent

Management receives the new UIVersion field and 
store in the Peer's system meta
2022-05-25 23:25:02 +02:00
Maycon Santos
5e3eceb0d6
Update MacOS and Windows installers (#325)
Updated windows installer package generation with

launch UI after install
remove older version
remove wiretrustee
added install and uninstall scripts
Updated brew cask:

run installer script to start daemon
Daemon conflicts with wiretrustee on brew

Removed migrate check on non-root commands like status

CLI CMD is now going to stdout
2022-05-25 19:41:03 +02:00
Misha Bragin
abe78666d4
Store updated system info on Login to Management (#323) 2022-05-23 13:03:57 +02:00
Maycon Santos
5cbfa4bb9e
Rebrand client cli (#320) 2022-05-22 18:53:47 +02:00
Maycon Santos
e334e8db53
Renaming project builds and including new Icons (#318)
Added MacOS icons, plist, and cask template file

Adjusted goreleaser with the new name for all builds

Added Icon and update windows-ui build to include it and avoid console

migrated Docker builds to new namespace netbirdio
2022-05-21 18:42:56 +02:00
Givi Khojanashvili
3ce3ccc39a
Add rules for ACL (#306)
Add rules HTTP endpoint for frontend - CRUD operations.
Add Default rule - allow all.
Send network map to peers based on rules.
2022-05-21 15:21:39 +02:00
Maycon Santos
001cf98dce
Update daemon server adminURL and managementURL fields (#314)
Removed the UP call in the login function

Attempt login on change to get status
2022-05-18 00:22:47 +02:00
Misha Bragin
b623c255b6
Improve output of a status command (#312) 2022-05-12 21:57:31 +02:00
Maycon Santos
e5c52efb4c
Client Login via device authorization flow (#309)
UI and CLI Clients are now able to use SSO login by default

we will check if the management has configured or supports SSO providers

daemon will handle fetching and waiting for an access token

Oauth package was moved to internal to avoid one extra package at this stage

Secrets were removed from OAuth

CLI clients have less and better output

2 new status were introduced, NeedsLogin and FailedLogin for better messaging

With NeedsLogin we no longer have endless login attempts
2022-05-12 11:17:24 +02:00
Maycon Santos
fec3132585
Adding peer registration support to JWT (#305)
The management will validate the JWT as it does in the API
 and will register the Peer to the user's account.

New fields were added to grpc messages in management
 and client daemon and its clients were updated

Peer has one new field, UserID, 
that will hold the id of the user that registered it

JWT middleware CheckJWT got a splitter 
and renamed to support validation for non HTTP requests

Added test for adding new Peer with UserID

Lots of tests update because of a new field
2022-05-05 20:02:15 +02:00
Givi Khojanashvili
fbf778a221
fix(client): add checking on empty config in the gRPC handler (#307) 2022-05-05 20:00:28 +02:00
Misha Bragin
70ffc9d625
Make systray connected/disconnected icon switch faster (#299) 2022-04-18 09:43:37 +02:00
Givi Khojanashvili
951e011a9c
Add Settings window to Agent UI
Agent systray UI has been extended with
a setting window that allows configuring 
management URL, admin URL and 
supports pre-shared key.
While for the Netbird managed version 
the Settings are not necessary, it helps
to properly configure the self-hosted version.
2022-04-15 17:30:12 +02:00
Maycon Santos
c3bc85e22d
Rename module to netbirdio/netbird (#288)
rename the go module to netbirdio/netbird 
as part of our rebranding.
2022-03-26 12:08:54 +01:00
braginini
a0d5a8fb9c Rename systray menu items and add new logo 2022-03-25 15:28:51 +01:00
Givi Khojanashvili
2aaeeac7f6
Fix stop not cleaning up WireGuard interface (#286) 2022-03-25 13:21:04 +01:00
Givi Khojanashvili
a15d52b263
Add UI binary to windows installer (#285)
This PR adds Desktop UI to Windows installer
2022-03-23 18:24:25 +01:00
Maycon Santos
a2fc4ec221
Rotate Access token with refresh token (#280)
Add method for rotating access token with refresh tokens
This will be useful for catching expired sessions and
offboarding users

Also added functions to handle secrets. They have to be revisited
as some tests didn't run on CI as they waited some user input, like password
2022-03-22 13:12:11 +01:00
Givi Khojanashvili
4ef3c7a637
Add basic desktop UI - systray
This PR adds a basic UI for desktop
applications that support Linux, Max
and Windows.
2022-03-20 17:36:35 +01:00
Maycon Santos
bd61be24be
Add OAuth Package and Auth0 Client (#273)
Adding package for retrieving an access 
token with a device login flow

For now, we got Auth0 as a client but the 
Interface Client is ready
2022-03-20 08:29:18 +01:00
Maycon Santos
1cd1e84290
Run tests in serial and update multi-peer test (#269)
Updates test workflows with serial execution to avoid collision 
of ports and resource names.

Also, used -exec sudo flag for UNIX tests and removed not-needed
 limits configuration on Linux and added a 5 minutes timeout.

Updated the multi-peer tests in the client/internal/engine_test.go
 to provide proper validation when creating or starting 
a peer engine instance fails.

As some operations of the tests running on windows
 are slow, we will experiment with disabling the Defender before 
restoring cache and checkout a repository, then we reenable 
it to run the tests.

disabled extra logs for windows interface
2022-03-16 11:02:06 +01:00
Mikhail Bragin
957474817f
Remove up_test (#268)
up_test is redundant because it is tested in
up_daemon_test

Co-authored-by: mlsmaycon <mlsmaycon@gmail.com>
2022-03-14 17:33:15 +01:00
Mikhail Bragin
1660a915e2
Fix goreleaser version to 1.6.3 (#266)
As status command relies on log,
we should always use console as output

Co-authored-by: mlsmaycon <mlsmaycon@gmail.com>
2022-03-14 13:16:16 +01:00
Mikhail Bragin
e3b809a1d4
Update ManagementURL in Config (#262)
If ManagementURL is present in the config file
and cmd (e.g. up or login) specifies a new one,
then update config file with a new ManagementURL
2022-03-13 15:17:18 +01:00
Mikhail Bragin
b2f4322a31
Set local unix socket permissions to rw (#263) 2022-03-13 15:16:35 +01:00
Mikhail Bragin
d7b69b91b9
Fix error when removing peer conn (#264)
When stopping engine, all peer conns have to be closed
and for each peer WireGuard iface is called
to remove WireGuard peer.
This operation happens in a goroutine causing
Engine to remove the whole WireGuard interface before.
Therefore consequent calls to RemovePeer are unsuccessful.
This fix just adds a small delay before removing interface.
2022-03-13 15:16:16 +01:00
Mikhail Bragin
a3a6283ac6
Update windows installer and docs
Update binary installation docs
Add service start in Windows installer
2022-03-11 14:05:44 +01:00
Mikhail Bragin
be0c5c887c
Persist Network Serial to Store to avoid outdated netmap sent (#260)
Fix outdated update coming from management
even when it is actually not outdated.
2022-03-10 18:18:38 +01:00
Mikhail Bragin
8cc93e0dbe
Init logger for every cmd (#259) 2022-03-10 18:14:07 +01:00
Maycon Santos
612ef98f03
Call start services function for tests (#257)
* Call start services function for tests

when testing CMDs we were using some global
variables which got replaced by parallel test

Now we will call a single function independently
for each test
2022-03-10 11:53:09 +01:00
braginini
347a668bd5 Fix UP cmd to pass managementURL to daemon 2022-03-08 16:10:44 +01:00
Givi Khojanashvili
ef47385e38
Split client app into cmd and daemon service (#239) 2022-03-08 14:47:55 +01:00
Mikhail Bragin
430e0415df
Remove Wireguard peer in no-proxy mode on Close (#247)
When connection is closed the wireguard peer should be gone.
It wasn't happening until this fix.
2022-03-02 14:50:22 +01:00
Mikhail Bragin
5d4c2643a3
Support no-proxy mode connection mode (#245)
When one of the peers has a static public host IP
or both peers are in the same local network
we establish a direct Wireguard connection
bypassing proxy usage.
This helps reduce FD usage and improves
performance.
2022-03-01 14:07:33 +01:00
Maycon Santos
5546eba36a
Write to temp file before saving data (#238)
* Create temp file before saving data

On the event of full disk, we may encounter the case where the
destination file get replaced by an empty file as the
ioutil.WriteFile truncates the destination before write.

* Close the tempFile instance before moving it

* Blacklist Wireguard interfaces for ICE checks
2022-02-20 19:03:16 +01:00
braginini
1c2c1a876b chore: fix selected candidate pair logging 2022-02-17 08:36:37 +01:00
Mikhail Bragin
e5dcd4753e
single socket ice (#232)
Enables single socket for HOST and SRFLX candidates by utilizing pion.ice UDPMux
2022-02-16 20:00:21 +01:00
shatoboar
b59fd50226
Add client version to the client app and send it to the management service (#222)
* test: WIP mocking the grpc server for testing the sending of the client information

* WIP: Test_SystemMetaDataFromClient with mocks, todo:

* fix: failing meta data test

* test: add system meta expectation in management client test

* fix: removing deprecated register function, replacing with new one

* fix: removing deprecated register function from mockclient interface impl

* fix: fixing interface declaration

* chore: remove unused commented code

Co-authored-by: braginini <bangvalo@gmail.com>
2022-02-08 18:03:27 +01:00
Mikhail Bragin
3c959bb178
Login exits on a single attempt to connect to management (#220)
* fix: login exits on a single attempt to connect to management

* chore: add log verbosity for Login operation
2022-02-06 18:56:00 +01:00
shatoboar
efbb5acf63
Add client version to the client app and send it to the management service (#218)
* moved wiretrustee version from main to system.info

* added wiretrustee version for all supported platforms

* typo corrected

* refactor: use single WiretrusteeVersion() func to get version of the client

Co-authored-by: braginini <bangvalo@gmail.com>
2022-02-03 18:35:54 +01:00
Maycon Santos
98dc5824ce
Rollback stopping management client within engine stop (#204)
* start close handler when using console

* don't close management client within engine stop
2022-01-25 11:18:01 +01:00
Maycon Santos
0739038d51
Fix unstable parallel tests (#202)
* update interface tests and configuration messages

* little debug

* little debug on both errors

* print all devs

* list of devices

* debug func

* handle interface close

* debug socks

* debug socks

* if ports match

* use random assigned ports

* remove unused const

* close management client connection when stopping engine

* GracefulStop when management clients are closed

* enable workflows on PRs too

* remove iface_test debug code
2022-01-25 09:40:28 +01:00
Maycon Santos
fd7282d3cf
Link account id with the external user store (#184)
* get account id from access token claim

* use GetOrCreateAccountByUser and add test

* correct account id claim

* remove unused account

* Idp manager interface

* auth0 idp manager

* use if instead of switch case

* remove unnecessary lock

* NewAuth0Manager

* move idpmanager to its own package

* update metadata when accountId is not supplied

* update tests with idpmanager field

* format

* new idp manager and config support

* validate if we fetch the interface before converting to string

* split getJWTToken

* improve tests

* proper json fields and handle defer body close

* fix ci lint notes

* documentation and proper defer position

* UpdateUserAppMetadata tests

* update documentation

* ManagerCredentials interface

* Marshal and Unmarshal functions

* fix tests

* ManagerHelper and ManagerHTTPClient

* further tests with mocking

* rename package and custom http client

* sync local packages

* remove idp suffix
2022-01-24 11:21:30 +01:00
Mikhail Bragin
2ad899b066
Test conn (#199)
* test: add conn tests

* test: add ConnStatus tests

* test: add error test

* test: add more conn tests
2022-01-21 13:52:19 +01:00
Mikhail Bragin
23f028e65d
test: improve engine test (#198) 2022-01-18 17:52:55 +01:00
Mikhail Bragin
5db130a12e
Support new Management service protocol (NetworkMap) (#193)
* feature: support new management service protocol

* chore: add more logging to track networkmap serial

* refactor: organize peer update code in engine

* chore: fix lint issues

* refactor: extract Signal client interface

* test: add signal client mock

* refactor: introduce Management Service client interface

* chore: place management and signal clients mocks to respective packages

* test: add Serial test to the engine

* fix: lint issues

* test: unit tests for a networkMapUpdate

* test: unit tests Sync update
2022-01-18 16:44:58 +01:00
Maycon Santos
0f7ab4354b
Fix cicd testing issue (#197)
* sync module

* cache per test os

* different port for tests

* wireguard packages versions
2022-01-17 15:10:18 +01:00
Maycon Santos
64f2d295a8
Refactor Interface package and update windows driver (#192)
* script to generate syso files

* test wireguard-windows driver package

* set int log

* add windows test

* add windows test

* verbose bash

* use cd

* move checkout

* exit 0

* removed tty flag

* artifact path

* fix tags and add cache

* fix cache

* fix cache

* test dir

* restore artifacts in the root

* try dll file

* try dll file

* copy dll

* typo in copy dll

* compile test

* checkout first

* updated cicd

* fix add address issue and gen GUID

* psexec typo

* accept eula

* mod tidy before tests

* regular test exec and verbose test with psexec

* test all

* return WGInterface Interface

* use WgIfaceName and timeout after 30 seconds

* different ports and validate connect 2 peers

* Use time.After for timeout and close interface

* Use time.After for testing connect peers

* WG Interface struct

* Update engine and parse address

* refactor Linux create and assignAddress

* NewWGIface and configuration methods

* Update proxy with interface methods

* update up command test

* resolve lint warnings

* remove psexec test

* close copied files

* add goos before build

* run tests on mac,windows and linux

* cache by testing os

* run on push

* fix indentation

* adjust test timeouts

* remove parallel flag

* mod tidy before test

* ignore syso files

* removed functions and renamed vars

* different IPs for connect peers test

* Generate syso with DLL

* Single Close method

* use port from test constant

* test: remove wireguard interfaces after finishing engine test

* use load_wgnt_from_rsrc

Co-authored-by: braginini <bangvalo@gmail.com>
2022-01-17 14:01:58 +01:00
Mikhail Bragin
afb302d5e7
Change Management Sync protocol to support incremental (serial) network changes (#191)
* feature: introduce NetworkMap to the management protocol with a Serial ID

* test: add Management Sync method protocol test

* test: add Management Sync method NetworkMap field check [FAILING]

* test: add Management Sync method NetworkMap field check [FAILING]

* feature: fill NetworkMap property to when Deleting peer

* feature: fill NetworkMap in the Sync protocol

* test: code review mentions - GeneratePrivateKey() in the test

* fix: wiretrustee client use wireguard GeneratePrivateKey() instead of GenerateKey()

* test: add NetworkMap test

* fix: management_proto test remove store.json on test finish
2022-01-16 17:10:36 +01:00
Mikhail Bragin
319632ffe8
Fix concurrency on the client (#183)
* reworked peer connection establishment logic eliminating race conditions and deadlocks while running many peers
2022-01-10 18:43:13 +01:00
braginini
828410b34c chore: [client] - add some randomization to peer conn timeout 2022-01-01 14:03:03 +01:00
Mikhail Bragin
a67b9a16af
fix peer update concurrency on the client side (#177)
* fix: gRpc Signal and Management connections deadlock on IDLE state

* fix: client peer update concurrency issues
2021-12-31 18:11:33 +01:00
Mikhail Bragin
6b7d4cf644
feature: add Wireguard preshared-key support (#160) 2021-11-21 17:47:19 +01:00
Maycon Santos
7bf9793f85
Support environment vars (#155)
* updage flag values from environment variables

* add log and removing unused constants

* removing unused code

* Docker build client

* fix indentation

* Documentation with docker command

* use docker volume
2021-11-15 09:11:50 +01:00
Maycon Santos
fcbf980588
Stop service before uninstall (#158) 2021-11-14 21:30:18 +01:00
Mikhail Bragin
d08e5efbce
fix: too many open files caused by agent not being closed (#154)
* fix: too many open files caused by agent not being closed after unsuccessful attempts to start a peer connection (happens when no network available)

* fix: minor refactor to consider signal status
2021-11-14 19:41:17 +01:00
Mikhail Bragin
ed1e4dfc51
refactor signal client sync func (#147)
* refactor: move goroutine that runs Signal Client Receive to the engine for better control

* chore: fix comments typo

* test: fix golint

* chore: comments update

* chore: consider connection state=READY in signal and management clients

* chore: fix typos

* test: fix signal ping-pong test

* chore: add wait condition to signal client

* refactor: add stream status to the Signal client

* refactor: defer mutex unlock
2021-11-06 15:00:13 +01:00
braginini
4d34fb4e64 chore: decrease backoff maxinterval to avoid long connection waiting times on the client app 2021-11-02 14:51:29 +01:00
Mikhail Bragin
d040cfed7e
fix: client app retry logic (#144)
* fix: retry logic
2021-11-01 09:34:06 +01:00
braginini
2d39f6ccae fix: remove ICE port limits 2021-10-27 10:49:03 +02:00
Mikhail Bragin
0b2c26847b
fix: return ctx error when UP command exists (#140) 2021-10-26 21:49:05 +02:00
braginini
595ea0d4f8 chore: decrease log verbosity 2021-10-26 10:08:28 +02:00
Mikhail Bragin
74485d3b13
fix: service hanging when error on startup has been encountered (#135) 2021-10-18 13:29:26 +02:00
Mikhail Bragin
bef3b3392b
fix: graceful shutdown (#134)
* fix: graceful shutdown

* fix: windows graceful shutdown
2021-10-17 22:15:38 +02:00
Maycon Santos
fcea3c99d4
Enhance up command (#133)
* move setup-key to root command

* up will check login and start service

* update tests to reflect new UP capabilities

* display client IP

* removed unused argument

* install service if not installed

* update post-install and add pre remove script

* improve log messages

* handle service status failures and install service when needed

* removing unused files

* update documentation and description

* add version command

* update service lib version

* using lib constant for not installed services

* match version from goreleaser

* fix: graceful shutdown

* stop only if service is running

* add logs initialization to service controller commands

Co-authored-by: braginini <bangvalo@gmail.com>
2021-10-17 21:34:07 +02:00
braginini
528a26ea3e chore: simplify direct connection logic 2021-09-09 16:43:52 +02:00
Mikhail Bragin
13288374f1
test: fix peer reflexive connectivity (#116) 2021-09-09 10:45:04 +02:00
Mikhail Bragin
ec759bc461
Delete peer (#114)
* feature: add peer deletion

* feature: add peer deletion [CLIENT]

* fix: lint error

* test: fix sync block

* test: fix management test

* feature: add client stop after was deleted

* chore: remove permission denied cancellation

* chore: add larger signal backoff

* feature: notify deleted peer of removal

* fix: lint issue

* chore: add 2nd default key - one off

* test: fix account key check
2021-09-07 18:36:46 +02:00
braginini
081162864d fix: management config 2021-09-07 10:35:33 +02:00
Mikhail Bragin
13b4be31df
feature: add logging to a file (#112)
* feature: add logging to a file

* refactor: move InitLog to util lib

* docs: update signal and management docs

* chore: update docker compose

* set --log-file to console

* chore: comment out log volume in docker compose

Co-authored-by: mlsmaycon <mlsmaycon@gmail.com>
2021-09-07 09:53:18 +02:00
braginini
a56aba8b06 chore: init STUNs and TURNs as empty arrays 2021-09-06 14:23:03 +02:00
Maycon Santos
6c233fcc3f
Add windows installer (#109)
* windows installer

* unpack function in local dir

* working-directory client

* using env var plugin

* test tag and publishing

* getting version from tag

* using version number

* remove unnecessary commands and add description

* using long version outputs

* uncomment docker steps
2021-09-06 10:20:26 +02:00
Mikhail Bragin
a4db0b4e94
client update of TURNs and STUNs (#106)
* feature: update STUNs and TURNs in engine

* fix: setup TURN credentials request only when refresh enabled

* feature: update TURNs and STUNs in teh client app on Management update

* chore: disable peer reflexive candidates in ICE

* chore: relocate management.json

* chore: make TURN secret and pwd plain text in config
2021-09-03 17:47:40 +02:00
Mikhail Bragin
b17424d630
Turn credentials generation (#102)
* abstract peer channel

* remove wip code

* refactor NewServer with Peer updates channel

* feature: add TURN credentials manager

* hmac logic

* example test function

* test: add TimeBasedAuthSecretsManager_GenerateCredentials  test

* test: make tests for now with hardcoded secret

* test: add TimeBasedAuthSecretsManager_SetupRefresh test

* test: add TimeBasedAuthSecretsManager_SetupRefresh test

* test: add TimeBasedAuthSecretsManager_CancelRefresh test

* feature: extract TURNConfig to the management config

* feature: return hash based TURN credentials only on initial sync

* feature: make TURN time based secret credentials optional

Co-authored-by: mlsmaycon <mlsmaycon@gmail.com>
2021-09-02 14:41:54 +02:00
Maycon Santos
a31cbb1f5b
abstract peer channel (#101)
* abstract peer channel

* remove wip code

* refactor NewServer with Peer updates channel

* add PeersUpdateManager tests

* adding documentation

* using older version of linter

* verbose lint

* skip cache

* setup go version

* extra output

* configure fetch-depth

* exit 0

* skip-build-cache: true

* disabling failure for lint for now

* fix: darwin issue

* enable lint failure

* remove sock file for macOS

* refactor: remove tests interdependence

* fixed linux native iface

Co-authored-by: braginini <bangvalo@gmail.com>
2021-08-29 17:48:31 +02:00
braginini
a78e518327 feature: detect peers in local network 2021-08-29 16:12:39 +02:00
braginini
2c1d7c0fd4 fix: rename info package 2021-08-29 13:34:17 +02:00
braginini
593c66fea6 fix: darwin issue 2021-08-29 13:30:34 +02:00
braginini
5f8211773d fix: lint error 2021-08-29 13:23:58 +02:00
braginini
64ca05c8e7 fix: lint error 2021-08-29 13:22:52 +02:00
braginini
5c7260298f chore: adjust system info discovery methods 2021-08-27 11:45:46 +02:00
braginini
695148410f test: increase client interface up timout 2021-08-20 15:55:28 +02:00
braginini
3a41014adb Merge branch 'main' into setup-key-http-api 2021-08-20 14:18:25 +02:00
braginini
708835afa8 test: change test data to support new setup key fields 2021-08-20 13:40:07 +02:00
braginini
0017360b8d fix: up test 2021-08-20 13:29:29 +02:00
braginini
34cffb3bf0 fix: login test 2021-08-19 21:17:39 +02:00
Mikhail Bragin
1dfa99d07c
add wiretrustee LOGIN command (#90)
* feature: add wiretrustee LOGIN command

* chore: add management initial connection timeout

* test: add login cmd test

* test: validate generated config in login cmd

* test: add up command test

* chore: add timeout to signal client creation method

* test: close wireguard interface once test finished
2021-08-18 13:35:42 +02:00
braginini
f7e51e7453 refactor: use logrus in service_controller 2021-08-17 09:14:21 +02:00
braginini
2c6748610c fix: service command not running up 2021-08-17 09:13:25 +02:00
Mikhail Bragin
e8ca289f4a
test: add management client tests (#89)
* test: add management client tests

* test: add management client Sync test

* fix: engine test

* test: remove engine tests

* test: return engine tests [check]

* test: remove engine tests [check]
2021-08-16 23:30:51 +02:00
braginini
2a97053cae fix: windows build 2021-08-16 15:23:09 +02:00
Mikhail Bragin
877ad97a96
Peer management login (#83)
* feature: replace RegisterPeer with Login method that does both - registration and login

* test: add management login test

* feature: add WiretrusteeConfig to the Login response to configure peer global config

* feature: add client peer login support

* fix: missing parts

* chore: update go deps

* feature: support Management Service gRPC endpoints [CLIENT]

* feature: finalize client sync with management

* fix: management store peer key lower case restore

* fix: management returns peer ip without a mask

* refactor: remove cmd pkg

* fix: invalid tun interface name on mac

* fix: timeout when calling management client

* fix: tests and lint errors

* fix: golang-test workflow

* fix: client service tests

* fix: iface build

* feature: detect management scheme on startup

* chore: better logs for management

* fix: goreleaser

* fix: lint errors

* fix: signal TLS

* fix: direct Wireguard connection

* chore: verbose logging on direct connection
2021-08-15 16:56:26 +02:00