Enhance the user experience by enabling authentication to Netbird using Single Sign-On (SSO) with any Identity Provider (IDP) provider. Current client offers this capability through the Device Authorization Flow, however, is not widely supported by many IDPs, and even some that do support it do not provide a complete verification URL.
To address these challenges, this pull request enable Authorization Code Flow with Proof Key for Code Exchange (PKCE) for client logins, which is a more widely adopted and secure approach to facilitate SSO with various IDP providers.
This fixes the test logic creates copy of account with empty id and
re-pointing the indices to it.
Also, adds additional check for empty ID in SaveAccount method of FileStore.
* Optimize rules with All groups
* Use IP sets in ACLs (nftables implementation)
* Fix squash rule when we receive optimized rules list from management
* Check links of groups before delete it
* Add delete group handler test
* Rename dns error msg
* Add delete group test
* Remove rule check
The policy cover this scenario
* Fix test
* Check disabled management grps
* Change error message
* Add new activity for group delete event
* Extend protocol and firewall manager to handle old management
* Send correct empty firewall rules list when delete peer
* Add extra tests for firewall manager and uspfilter
* Work with inconsistent state
* Review note
* Update comment
Add new feature to notify the user when new client route has arrived.
Refactor the initial route handling. I move every route logic into the route
manager package.
* Add notification management for client rules
* Export the route notification for Android
* Compare the notification based on network range instead of id.
* Avoid storing account if no peer meta or expiration change
* remove extra log
* Update management/server/peer.go
Co-authored-by: Misha Bragin <bangvalo@gmail.com>
* Clarify why we need to skip account update
---------
Co-authored-by: Misha Bragin <bangvalo@gmail.com>
The new functionality allows blocking a user in the Management service.
Blocked users lose access to the Dashboard, aren't able to modify the network map,
and all of their connected devices disconnect and are set to the "login expired" state.
Technically all above was achieved with the updated PUT /api/users endpoint,
that was extended with the is_blocked field.
Refactored updateServerStates and calculateState
added some checks to ensure we are not sending connecting on context canceled
removed some state updates from the RunClient function
Some IDP requires different scope requests and
issue access tokens for different purposes
This change allow for remote configurable scopes
and the use of ID token
Some IDP use different audience for different clients.
This update checks HTTP and Device authorization flow audience values.
---------
Co-authored-by: Givi Khojanashvili <gigovich@gmail.com>
Default Rego policy generated from the rules in some cases is broken.
This change fixes the Rego template for rules to generate policies.
Also, file store load constantly regenerates policy objects from rules.
It allows updating/fixing of the default Rego template during releases.
Check SSO support by calling the internal.GetDeviceAuthorizationFlowInfo
Rename LoginSaveConfigIfSSOSupported to SaveConfigIfSSOSupported
Receive device name as input for setup-key login
have a default android name when no context value is provided
log non parsed errors from management registration calls
Fix the status indication in the client service. The status of the
management server and the signal server was incorrect if the network
connection was broken. Basically the status update was not used by
the management and signal library.
Rego policy migration clears the rules property of the file storage, but it does not allow rollback management upgrade, so this changes pre-saves rules in the file store and updates it from the policies.
When peer login expires, all remote peers are updated to exclude the peer from connecting.
Once a peer re-authenticates, the remote peers are not updated.
This peer fixes the behavior.
The peer login expiration ACL check introduced in #714
filters out peers that are expired and agents receive a network map
without that expired peers.
However, the agents should see those peers in status "Disconnected".
This PR extends the Agent <-> Management protocol
by introducing a new field OfflinePeers
that contain expired peers. Agents keep track of those and display
then just in the Status response.
The Management gRPC API has too much business logic
happening while it has to be in the Account manager.
This also needs to make more requests to the store
through the account manager.
Bug 1: When calculating the network map, peers added by a setup key
were falling under expiration logic while they shouldn't.
Bug 2: Peers HTTP API didn't return expired peers for non-admin users
because of the expired peer check in the ACL logic.
The fix applies peer expiration checks outside of the ACL logic.
When we delete a peer from an account, we save the account in the file store.
The file store maintains peerID -> accountID and peerKey -> accountID indices.
Those can't be updated when we delete a peer because the store saves the whole account
without a peer already and has no access to the removed peer.
In this PR, we dynamically check if there are stale indices when GetAccountByPeerPubKey
and GetAccountByPeerID.
Goals:
Enable peer login expiration when adding new peer
Expire peer's login when the time comes
The account manager triggers peer expiration routine in future if the
following conditions are true:
peer expiration is enabled for the account
there is at least one peer that has expiration enabled and is connected
The time of the next expiration check is based on the nearest peer expiration.
Account manager finds a peer with the oldest last login (auth) timestamp and
calculates the time when it has to run the routine as a sum of the configured
peer login expiration duration and the peer's last login time.
When triggered, the expiration routine checks whether there are expired peers.
The management server closes the update channel of these peers and updates
network map of other peers to exclude expired peers so that the expired peers
are not able to connect anywhere.
The account manager can reschedule or cancel peer expiration in the following cases:
when admin changes account setting (peer expiration enable/disable)
when admin updates the expiration duration of the account
when admin updates peer expiration (enable/disable)
when peer connects (Sync)
P.S. The network map calculation was updated to exclude peers that have login expired.
Extend HTTP API with Account endpoints to configure global peer login expiration.
GET /api/accounts
PUT /api/account/{id}/
The GET endpoint returns an array of accounts with
always one account in the list. No exceptions.
The PUT endpoint updates account settings:
PeerLoginExpiration and PeerLoginExpirationEnabled.
PeerLoginExpiration is a duration in seconds after which peers' logins will expire.
This PR adds a peer login expiration logic that requires
peers created by a user to re-authenticate (re-login) after
a certain threshold of time (24h by default).
The Account object now has a PeerLoginExpiration
property that indicates the duration after which a peer's
login will expire and a login will be required. Defaults to 24h.
There are two new properties added to the Peer object:
LastLogin that indicates the last time peer successfully used
the Login gRPC endpoint and LoginExpirationEnabled that
enables/disables peer login expiration.
The login expiration logic applies only to peers that were created
by a user and not those that were added with a setup key.
This feature allows using the custom claim in the JWT token as a user ID.
Refactor claims extractor with options support
Add is_current to the user API response
Replace Peer.Key as internal identifier with a randomly generated Peer.ID
in the Management service.
Every group now references peers by ID instead of a public key.
Every route now references peers by ID instead of a public key.
FileStore does store.json file migration on startup by generating Peer.ID and replacing
all Peer.Key identifier references .
Adding --external-ip-map and --dns-resolver-address to up command and shorthand option to global flags.
Refactor get and read config functions with new ConfigInput type.
updated cobra package to latest release.
This PR adds system activity tracking.
The management service records events like
add/remove peer, group, rule, route, etc.
The activity events are stored in the SQLite event store
and can be queried by the HTTP API.
Updated tests, API, and account manager methods
Sync routes to peers in the distribution groups
Added store upgrade by adding the All group to routes that don't have them
Add a usage_limit parameter to the API.
This limits the number of times a setup key
can be used.
usage_limit == 0 indicates the the usage is inlimited.
Use stdout and stderr log path only if on Linux and attempt to create the path
Update status system with FQDN fields and
status command to display the domain names of remote and local peers
Set some DNS logs to tracing
update readme file
Due to peer reconnects when restarting the Management service,
there are lots of SaveStore operations to update peer status.
Store.SavePeerStatus stores peer status separately and the
FileStore implementation stores it in memory.
Added DNS update protocol message
Added sync to clients
Update nameserver API with new fields
Added default NS groups
Added new dns-name flag for the management service append to peer DNS label
This PR simplifies Store and FileStore
by keeping just the Get and Save account methods.
The AccountManager operates mostly around
a single account, so it makes sense to fetch
the whole account object from the store.
This PR brings open-telemetry metrics to the
Management service.
The Management service exposes new HTTP endpoint
/metrics on 8081 port by default.
The port can be changed by specifying
--metrics-port PORT flag when starting the service.
This will help us understand usage on self-hosted deployments
The collection may be disabled by using the flag --disable-anonymous-metrics or
NETBIRD_DISABLE_ANONYMOUS_METRICS in setup.env
This PR brings user invites logic to the Management service
via HTTP API.
The POST /users/ API endpoint creates a new user in the Idp
and then in the local storage.
Once the invited user signs ups, the account invitation is redeemed.
There are a few limitations.
This works only with an enabled IdP manager.
Users that already have a registered account can't be invited.
Add DNS package and Nameserver group objects
Add CRUD operations for Nameserver Groups to account manager
Add Routes and Nameservers to Account Copy method
Run docker tests with timeout and serial flags
Support Generic OAuth 2.0 Device Authorization Grant
as per RFC specification https://www.rfc-editor.org/rfc/rfc8628.
The previous version supported only Auth0 as an IDP backend.
This implementation enables the Interactive SSO Login feature
for any IDP compatible with the specification, e.g., Keycloak.
When creating TLSConfig from provided certificate file, the HTTP/2 support is not enabled.
It works with Certmanager because it adds h2 support.
We enable it the same way when creating TLSConfig from files.
