in some cases an IDP device flow expiration time might be shorter than 90s
we should check if the cancel context was set before using it
We will need a follow-up to identify and document the IDP with lower defaults.
fixes#890
Adds functionality to support Identity Provider (IdP) managers
that do not support a complete verification URI in the
device authentication flow.
In cases where the verification_uri_complete field is empty,
the user will be prompted with their user_code,
and the verification_uri field will be used as a fallback
This PR brings support of a shared port between stun (ICE agent) and
the kernel WireGuard
It implements a single port mode for execution with kernel WireGuard
interface using a raw socket listener.
BPF filters ensure that only STUN packets hit the NetBird userspace app
Removed a lot of the proxy logic and direct mode exchange.
Now we are doing an extra hole punch to the remote WireGuard
port for best-effort cases and support to old client's direct mode.
This PR adds supports for the WireGuard userspace implementation
using Bind interface from wireguard-go.
The newly introduced ICEBind struct implements Bind with UDPMux-based
structs from pion/ice to handle hole punching using ICE.
The core implementation was taken from StdBind of wireguard-go.
The result is a single WireGuard port that is used for host and server reflexive candidates.
Relay candidates are still handled separately and will be integrated in the following PRs.
ICEBind checks the incoming packets for being STUN or WireGuard ones
and routes them to UDPMux (to handle hole punching) or to WireGuard respectively.
Refactored updateServerStates and calculateState
added some checks to ensure we are not sending connecting on context canceled
removed some state updates from the RunClient function
Some IDP requires different scope requests and
issue access tokens for different purposes
This change allow for remote configurable scopes
and the use of ID token
On Android, because of the hard SELinux policies can not list the
interfaces of the ICE package. Without it can not generate a host type
candidate. In this pull request, the list of interfaces comes via the Java
interface.
Check SSO support by calling the internal.GetDeviceAuthorizationFlowInfo
Rename LoginSaveConfigIfSSOSupported to SaveConfigIfSSOSupported
Receive device name as input for setup-key login
have a default android name when no context value is provided
log non parsed errors from management registration calls
Fix the status indication in the client service. The status of the
management server and the signal server was incorrect if the network
connection was broken. Basically the status update was not used by
the management and signal library.
Before defining if we will use direct or proxy connection we will exchange a
message with the other peer if the modes match we keep the decision
from the shouldUseProxy function otherwise we skip using direct connection.
Added a feature support message to the signal protocol
The peer login expiration ACL check introduced in #714
filters out peers that are expired and agents receive a network map
without that expired peers.
However, the agents should see those peers in status "Disconnected".
This PR extends the Agent <-> Management protocol
by introducing a new field OfflinePeers
that contain expired peers. Agents keep track of those and display
then just in the Status response.
The ConnStatus is a custom type based on iota
like an enum. The problem was nowhere used to the
benefits of this implementation. All ConnStatus
instances has been compared with strings. I
suppose the reason to do it to avoid a circle
dependency. In this commit the separated status
package has been moved to peer package.
Remove unused, exported functions from engine
Code cleaning in the config.go of the client. This change keep the
logic in original state. The name of the exported function was not
covered well the internal workflow. Without read the comment was not
understandable what is the difference between the GetConfig and
ReadConfig. By the way both of them doing write operation.
Small code cleaning in the iface package. These changes necessary to
get a clean code in case if we involve more platforms. The OS related
functions has been distributed into separate files and it has been
mixed with not OS related logic. The goal is to get a clear picture
of the layer between WireGuard and business logic.
* Disable upstream DNS resolver after several tries and fails
* Add tests for upstream fails
* Use an extra flag to disable domains in DNS upstreams
* Fix hashing IPs of nameservers for updates.
avoid sending admin or management URLs on service start
as it doesn't have an input
Parse management and admin URL when needed
Pass empty admin url on commands to prevent default overwrite
Adding --external-ip-map and --dns-resolver-address to up command and shorthand option to global flags.
Refactor get and read config functions with new ConfigInput type.
updated cobra package to latest release.
This PR adds system activity tracking.
The management service records events like
add/remove peer, group, rule, route, etc.
The activity events are stored in the SQLite event store
and can be queried by the HTTP API.
If peer is deleted in the console,
we set its state as needs login
On Down command we clean any previous state errors
this prevents need for daemon restart
Removed state error wrapping when engine exits, log is enough
Use stdout and stderr log path only if on Linux and attempt to create the path
Update status system with FQDN fields and
status command to display the domain names of remote and local peers
Set some DNS logs to tracing
update readme file
Added host configurators for Linux, Windows, and macOS.
The host configurator will update the peer system configuration
directing DNS queries according to its capabilities.
Some Linux distributions don't support split (match) DNS or custom ports,
and that will be reported to our management system in another PR
Due to peer reconnects when restarting the Management service,
there are lots of SaveStore operations to update peer status.
Store.SavePeerStatus stores peer status separately and the
FileStore implementation stores it in memory.
Added DNS update protocol message
Added sync to clients
Update nameserver API with new fields
Added default NS groups
Added new dns-name flag for the management service append to peer DNS label
If the gateway address would be nil which is
the case on macOS, we return the preferredSrc
added tests for getExistingRIBRouteGateway function
update log message
* Seticon only when status changes
This prevents a memory leak with the systray lib
when setting the icon every 2 seconds causes a large memory consumption
see https://github.com/getlantern/systray/issues/135
* Use fork with permanent fix
* Add additional check for needed kernel modules
* Check if wireguard and tun modules are loaded
If modules are loaded return true, otherwise attempt to load them
* fix state check
* Add module function tests
* Add test execution in container
* run client package tests on docker
* add package comment to new file
* force entrypoint
* add --privileged flag
* clean only if tables where created
* run from within the directories
Handle routes updates from management
Manage routing firewall rules
Manage peer RIB table
Add get peer and get notification channel from the status recorder
Update interface peers allowed IPs
Added additional common blacklisted interfaces
Updated the signal protocol to pass the peer port and netbird version
Co-authored-by: braginini <bangvalo@gmail.com>
Support Generic OAuth 2.0 Device Authorization Grant
as per RFC specification https://www.rfc-editor.org/rfc/rfc8628.
The previous version supported only Auth0 as an IDP backend.
This implementation enables the Interactive SSO Login feature
for any IDP compatible with the specification, e.g., Keycloak.
This PR fixes a race condition that happens
when agents connect to a Signal stream, multiple
times within a short amount of time. Common on
slow and unstable internet connections.
Every time an agent establishes a new connection
to Signal, Signal creates a Stream and writes an entry
to the registry of connected peers storing the stream.
Every time an agent disconnects, Signal removes the
stream from the registry.
Due to unstable connections, the agent could detect
a broken connection, and attempt to reconnect to Signal.
Signal will override the stream, but it might detect
the old broken connection later, causing peer deregistration.
It will deregister the peer leaving the client thinking
it is still connected, rejecting any messages.
All the existing agents by default connect to port 33073 of the
Management service. This value is also stored in the local config.
All the agents won't switch to the new port 443
unless explicitly specified in the config.
We want the transition to be smooth for our users, therefore
this PR adds logic to check whether the old port 33073 can be
changed to 443 and updates the config automatically.
This PR is a part of an effort to use standard ports (443 or 80) that are usually allowed by default in most of the environments.
Right now Management Service runs the Let'sEncrypt manager on port 443, HTTP API server on port 33071,
and a gRPC server on port 33073. There are three separate listeners.
This PR combines these listeners into one.
With this change, the HTTP and gRPC server runs on either 443 with TLS or 80 without TLS
by default (no --port specified).
Let's Encrypt manager always runs on port 443 if enabled.
The backward compatibility server runs on port 33073 (with TLS or without).
HTTP port 33071 is obsolete and not used anymore.
Newly installed agents will connect to port 443 by default instead of port 33073 if not specified otherwise.
When building client without CGO, user.Lookup
attempts to get user from /etc/passwd
Which doesn't have the user as MacOS uses
opendirectoryd as user directory
This PR fixes issues with the terminal when
running netbird ssh to a remote agent.
Every session looks up a user and loads its
profile. If no user is found, the connection is rejected.
The default user is root.
The Management client will try reconnecting in case.
of network issues or non-permanent errors.
If the device was off-boarded, then the client will stop retrying.
This PR adds support for SSH access through the NetBird network
without managing SSH skeys.
NetBird client app has an embedded SSH server (Linux/Mac only)
and a netbird ssh command.
Before this change, NetBird Agent wasn't handling
peer interface configuration changes dynamically.
Also, remote peer configuration changes have
not been applied (e.g. AllowedIPs changed).
Not a very common cause, but still it should be handled.
Now, Agent reacts to PeerConfig changes sent from the
management service and restarts remote connections
if AllowedIps have been changed.
The peer IP allocation logic was allocating sequential peer IP from the 100.64.0.0/10
address block.
Each account is created with a random subnet from 100.64.0.0/10.
The total amount of potential subnets is 64.
The new logic allocates random peer IP
from the account subnet.
This gives us flexibility to add support for
multi subnet accounts without overlapping IPs.
* GetClientID method and increase interval on slow_down err
* Reuse existing authentication flow if is not expired
Created a new struct to hold additional info
about the flow
If there is a waiting sso running, we cancel its context
* Run the up command on a goroutine
* Use time.Until
* Use proper ctx and consistently use goroutine for up/down
* Fix UP calls when state is idle
When we want to login we can call server.Login
It already checks the login status of the peer
* Remove unused status
* Defer close daemon client conn
Co-authored-by: braginini <bangvalo@gmail.com>
Send Desktop UI client version as user-agent to daemon
This is sent on every login request to the management
Parse the GRPC context on the system package and
retrieves the user-agent
Management receives the new UIVersion field and
store in the Peer's system meta
Updated windows installer package generation with
launch UI after install
remove older version
remove wiretrustee
added install and uninstall scripts
Updated brew cask:
run installer script to start daemon
Daemon conflicts with wiretrustee on brew
Removed migrate check on non-root commands like status
CLI CMD is now going to stdout
Added MacOS icons, plist, and cask template file
Adjusted goreleaser with the new name for all builds
Added Icon and update windows-ui build to include it and avoid console
migrated Docker builds to new namespace netbirdio
UI and CLI Clients are now able to use SSO login by default
we will check if the management has configured or supports SSO providers
daemon will handle fetching and waiting for an access token
Oauth package was moved to internal to avoid one extra package at this stage
Secrets were removed from OAuth
CLI clients have less and better output
2 new status were introduced, NeedsLogin and FailedLogin for better messaging
With NeedsLogin we no longer have endless login attempts
The management will validate the JWT as it does in the API
and will register the Peer to the user's account.
New fields were added to grpc messages in management
and client daemon and its clients were updated
Peer has one new field, UserID,
that will hold the id of the user that registered it
JWT middleware CheckJWT got a splitter
and renamed to support validation for non HTTP requests
Added test for adding new Peer with UserID
Lots of tests update because of a new field
Agent systray UI has been extended with
a setting window that allows configuring
management URL, admin URL and
supports pre-shared key.
While for the Netbird managed version
the Settings are not necessary, it helps
to properly configure the self-hosted version.
