#!/bin/bash
set -e

if ! which curl >/dev/null 2>&1; then
  echo "This script uses curl fetch OpenID configuration from IDP."
  echo "Please install curl and re-run the script https://curl.se/"
  echo ""
  exit 1
fi

if ! which jq >/dev/null 2>&1; then
  echo "This script uses jq to load OpenID configuration from IDP."
  echo "Please install jq and re-run the script https://stedolan.github.io/jq/"
  echo ""
  exit 1
fi

source setup.env
source base.setup.env

if ! which envsubst >/dev/null 2>&1; then
  echo "envsubst is needed to run this script"
  if [[ $(uname) == "Darwin" ]]; then
    echo "you can install it with homebrew (https://brew.sh):"
    echo "brew install gettext"
  else
    if which apt-get >/dev/null 2>&1; then
      echo "you can install it by running"
      echo "apt-get update && apt-get install gettext-base"
    else
      echo "you can install it by installing the package gettext with your package manager"
    fi
  fi
  exit 1
fi

if [[ "x-$NETBIRD_DOMAIN" == "x-" ]]; then
  echo NETBIRD_DOMAIN is not set, please update your setup.env file
  echo If you are migrating from old versions, you might need to update your variables prefixes from
  echo WIRETRUSTEE_.. TO NETBIRD_
  exit 1
fi

# local development or tests
if [[ $NETBIRD_DOMAIN == "localhost" || $NETBIRD_DOMAIN == "127.0.0.1" ]]; then
  export NETBIRD_MGMT_SINGLE_ACCOUNT_MODE_DOMAIN="netbird.selfhosted"
  export NETBIRD_MGMT_API_ENDPOINT=http://$NETBIRD_DOMAIN:$NETBIRD_MGMT_API_PORT
  unset NETBIRD_MGMT_API_CERT_FILE
  unset NETBIRD_MGMT_API_CERT_KEY_FILE
fi

# if not provided, we generate a turn password
if [[ "x-$TURN_PASSWORD" == "x-" ]]; then
  export TURN_PASSWORD=$(openssl rand -base64 32 | sed 's/=//g')
fi

MGMT_VOLUMENAME="${VOLUME_PREFIX}${MGMT_VOLUMESUFFIX}"
SIGNAL_VOLUMENAME="${VOLUME_PREFIX}${SIGNAL_VOLUMESUFFIX}"
LETSENCRYPT_VOLUMENAME="${VOLUME_PREFIX}${LETSENCRYPT_VOLUMESUFFIX}"
# if volume with wiretrustee- prefix already exists, use it, else create new with netbird-
OLD_PREFIX='wiretrustee-'
if docker volume ls | grep -q "${OLD_PREFIX}${MGMT_VOLUMESUFFIX}"; then
  MGMT_VOLUMENAME="${OLD_PREFIX}${MGMT_VOLUMESUFFIX}"
fi
if docker volume ls | grep -q "${OLD_PREFIX}${SIGNAL_VOLUMESUFFIX}"; then
  SIGNAL_VOLUMENAME="${OLD_PREFIX}${SIGNAL_VOLUMESUFFIX}"
fi
if docker volume ls | grep -q "${OLD_PREFIX}${LETSENCRYPT_VOLUMESUFFIX}"; then
  LETSENCRYPT_VOLUMENAME="${OLD_PREFIX}${LETSENCRYPT_VOLUMESUFFIX}"
fi

export MGMT_VOLUMENAME
export SIGNAL_VOLUMENAME
export LETSENCRYPT_VOLUMENAME

#backwards compatibility after migrating to generic OIDC with Auth0
if [[ -z "${NETBIRD_AUTH_OIDC_CONFIGURATION_ENDPOINT}" ]]; then

  if [[ -z "${NETBIRD_AUTH0_DOMAIN}" ]]; then
    # not a backward compatible state
    echo "NETBIRD_AUTH_OIDC_CONFIGURATION_ENDPOINT property must be set in the setup.env file"
    exit 1
  fi

  echo "It seems like you provided an old setup.env file."
  echo "Since the release of v0.8.10, we introduced a new set of properties."
  echo "The script is backward compatible and will continue automatically."
  echo "In the future versions it will be deprecated. Please refer to the documentation to learn about the changes http://netbird.io/docs/getting-started/self-hosting"

  export NETBIRD_AUTH_OIDC_CONFIGURATION_ENDPOINT="https://${NETBIRD_AUTH0_DOMAIN}/.well-known/openid-configuration"
  export NETBIRD_USE_AUTH0="true"
  export NETBIRD_AUTH_AUDIENCE=${NETBIRD_AUTH0_AUDIENCE}
  export NETBIRD_AUTH_CLIENT_ID=${NETBIRD_AUTH0_CLIENT_ID}
fi

echo "loading OpenID configuration from ${NETBIRD_AUTH_OIDC_CONFIGURATION_ENDPOINT} to the openid-configuration.json file"
curl "${NETBIRD_AUTH_OIDC_CONFIGURATION_ENDPOINT}" -q -o openid-configuration.json

export NETBIRD_AUTH_AUTHORITY=$(jq -r '.issuer' openid-configuration.json)
export NETBIRD_AUTH_JWT_CERTS=$(jq -r '.jwks_uri' openid-configuration.json)
export NETBIRD_AUTH_TOKEN_ENDPOINT=$(jq -r '.token_endpoint' openid-configuration.json)
export NETBIRD_AUTH_DEVICE_AUTH_ENDPOINT=$(jq -r '.device_authorization_endpoint' openid-configuration.json)
export NETBIRD_AUTH_PKCE_AUTHORIZATION_ENDPOINT=$(jq -r '.authorization_endpoint' openid-configuration.json)

if [[ ! -z "${NETBIRD_AUTH_DEVICE_AUTH_CLIENT_ID}" ]]; then
  # user enabled Device Authorization Grant feature
  export NETBIRD_AUTH_DEVICE_AUTH_PROVIDER="hosted"
fi

if [ "$NETBIRD_TOKEN_SOURCE" = "idToken" ]; then
    export NETBIRD_AUTH_PKCE_USE_ID_TOKEN=true
fi

# Check if letsencrypt was disabled
if [[ "$NETBIRD_DISABLE_LETSENCRYPT" == "true" ]]; then
  export NETBIRD_DASHBOARD_ENDPOINT="https://$NETBIRD_DOMAIN:443"
  export NETBIRD_SIGNAL_ENDPOINT="https://$NETBIRD_DOMAIN:$NETBIRD_SIGNAL_PORT"

  echo "Letsencrypt was disabled, the Https-endpoints cannot be used anymore"
  echo " and a reverse-proxy with Https needs to be placed in front of netbird!"
  echo "The following forwards have to be setup:"
  echo "- $NETBIRD_DASHBOARD_ENDPOINT -http-> dashboard:80"
  echo "- $NETBIRD_MGMT_API_ENDPOINT/api -http-> management:$NETBIRD_MGMT_API_PORT"
  echo "- $NETBIRD_MGMT_API_ENDPOINT/management.ManagementService/ -grpc-> management:$NETBIRD_MGMT_API_PORT"
  echo "- $NETBIRD_SIGNAL_ENDPOINT/signalexchange.SignalExchange/ -grpc-> signal:80"
  echo "You most likely also have to change NETBIRD_MGMT_API_ENDPOINT in base.setup.env and port-mappings in docker-compose.yml.tmpl and rerun this script."
  echo " The target of the forwards depends on your setup. Beware of the gRPC protocol instead of http for management and signal!"
  echo "You are also free to remove any occurrences of the Letsencrypt-volume $LETSENCRYPT_VOLUMENAME"
  echo ""

  export NETBIRD_SIGNAL_PROTOCOL="https"
  unset NETBIRD_LETSENCRYPT_DOMAIN
  unset NETBIRD_MGMT_API_CERT_FILE
  unset NETBIRD_MGMT_API_CERT_KEY_FILE
fi

# Check if management identity provider is set
if [ -n "$NETBIRD_MGMT_IDP" ]; then
  EXTRA_CONFIG={}

  # extract extra config from all env prefixed with NETBIRD_IDP_MGMT_EXTRA_
  for var in ${!NETBIRD_IDP_MGMT_EXTRA_*}; do
    # convert key snake case to camel case
    key=$(
      echo "${var#NETBIRD_IDP_MGMT_EXTRA_}" | awk -F "_" \
        '{for (i=1; i<=NF; i++) {output=output substr($i,1,1) tolower(substr($i,2))} print output}'
    )
    value="${!var}"

   echo "$var"
    EXTRA_CONFIG=$(jq --arg k "$key" --arg v "$value" '.[$k] = $v' <<<"$EXTRA_CONFIG")
  done

  export NETBIRD_MGMT_IDP
  export NETBIRD_IDP_MGMT_CLIENT_ID
  export NETBIRD_IDP_MGMT_CLIENT_SECRET
  export NETBIRD_IDP_MGMT_EXTRA_CONFIG=$EXTRA_CONFIG
else
  export NETBIRD_IDP_MGMT_EXTRA_CONFIG={}
fi

IFS=',' read -r -a REDIRECT_URL_PORTS <<< "$NETBIRD_AUTH_PKCE_REDIRECT_URL_PORTS"
REDIRECT_URLS=""
for port in "${REDIRECT_URL_PORTS[@]}"; do
    REDIRECT_URLS+="\"http://localhost:${port}\","
done

export NETBIRD_AUTH_PKCE_REDIRECT_URLS=${REDIRECT_URLS%,}

# Remove audience for providers that do not support it
if [ "$NETBIRD_DASH_AUTH_USE_AUDIENCE" = "false" ]; then
    export NETBIRD_DASH_AUTH_AUDIENCE=none
    export NETBIRD_AUTH_PKCE_AUDIENCE=
fi

# Read the encryption key
if test -f 'management.json'; then
    encKey=$(jq -r  ".DataStoreEncryptionKey" management.json)
    if [[ "$encKey" != "null" ]]; then
        export NETBIRD_DATASTORE_ENC_KEY=$encKey

    fi
fi

env | grep NETBIRD

bkp_postfix="$(date +%s)"
if test -f 'docker-compose.yml'; then
    cp docker-compose.yml "docker-compose.yml.bkp.${bkp_postfix}"
fi

if test -f 'management.json'; then
    cp management.json "management.json.bkp.${bkp_postfix}"
fi

if test -f 'turnserver.conf'; then
    cp turnserver.conf "turnserver.conf.bpk.${bkp_postfix}"
fi
envsubst <docker-compose.yml.tmpl >docker-compose.yml
envsubst <management.json.tmpl | jq . >management.json
envsubst <turnserver.conf.tmpl >turnserver.conf