diff --git a/scripts/005-bootstrap b/scripts/005-bootstrap
deleted file mode 100644
index 5333c2a0..00000000
--- a/scripts/005-bootstrap
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/bin/sh
-#
-# The bootstrap script is meant to be ran on a local user account after
-# everything core system related is set up.
-
-set -xe
-
-# Change the working directory to the location of this script
-# Then, move up to the root directory of the git repo
-cd "$(dirname "$0")"
-cd ..
-
-# Raise an error if either distro or environment is not present
-if [ "$#" -ne 2 ]; then
-    echo 'Usage:   sh ./path/to/bootstrap <distro> <environment>'
-    echo 'Example: sh ./scripts/bootstrap arch bspwm'
-    exit 1
-fi
-
-# Raise an error if the distro isn't either arch or fedora
-if ! [ "$1" == "arch" ] && ! [ "$1" == "fedora" ]; then
-    echo 'Error: distro must either be "arch" or "fedora"'
-    exit 1
-fi
-
-# Install common packages if tig isn't found (one of the common packages)
-if ! hash tig 2>/dev/null; then
-    echo 'Installing common packages...'
-    if [ "$1" == "arch" ];    then sudo pacman -Syu --needed --noconfirm - < ./packages/arch/common;  fi
-    if [ "$1" == "fedora" ];  then sudo dnf install $(cat ./packages/fedora/common) --assumeyes;      fi
-
-    echo 'Stowing common dotfiles...'
-    stow -S common --dir=dots --target="$HOME" --no-folding --verbose=2
-
-    echo 'Configuring common packages...'
-    sh ./scripts/006-common
-fi
-
-# If Arch Linux
-if [ "$1" == "arch" ]; then
-    # Raise an error if given an invalid environment
-    if ! [ "$2" == "plasma" ] && ! [ "$2" == "bspwm" ]; then
-        echo 'Invalid environment specified. Must be either "plasma" or "bspwm"'
-        exit 1
-    fi
-
-    # Install yay if it isn't found (needed for AUR and bspwm)
-    if ! hash yay 2>/dev/null; then
-        echo 'Installing yay...'
-        git clone https://aur.archlinux.org/yay-bin.git
-        cd yay-bin
-        makepkg -si
-        cd ..
-        rm -r yay-bin
-    fi
-
-    # Install plasma
-    if [ "$2" == "plasma" ]; then
-        echo 'Installing plasma packages...'
-        sudo pacman -Syu --needed --noconfirm --ignore discover - < ./packages/arch/plasma
-
-        echo 'Plasma packages installed. Now configure it.'
-    fi
-
-    # Install bspwm
-    if [ "$2" == "bspwm" ]; then
-        echo 'Installing bspwm packages...'
-        sudo pacman -Syu --needed --noconfirm - < ./packages/arch/bspwm
-
-        echo 'Installing bspwm packages from AUR...'
-        yay -S polybar rtv shotgun launch-cmd
-
-        echo 'Stowing bspwm dotfiles...'
-        stow -S bspwm --dir=dots --target="$HOME" --no-folding --verbose=2
-
-        echo 'Bspwm installed and configured. Now startx.'
-    fi
-fi
-
-# If Fedora
-if [ "$1" == "fedora" ]; then
-    # Raise an error if given an invalid environment
-    if ! [ "$2" == "gnome" ] && ! [ "$2" == "xfce" ]; then
-        echo 'Invalid environment specified. Must be either "gnome" or "xfce"'
-        exit 1
-    fi
-
-    # Install gnome packages if requested
-    if [ "$2" == "gnome" ]; then
-        echo 'Installing gnome packages...'
-        sudo dnf install $(cat ./packages/fedora/gnome) --assumeyes
-
-        echo 'Now that the gnome packages are installed, you must set it up manually.'
-    fi
-
-    # Install xfce packages if requested
-    if [ "$2" == "xfce" ]; then
-        echo 'Installing xfce packages...'
-        sudo dnf install $(cat ./packages/fedora/xfce) --assumeyes
-
-        echo 'Now that the xfce packages are installed, you must set it up manually.'
-    fi
-fi
diff --git a/scripts/006-common b/scripts/006-common
deleted file mode 100644
index d1a8fd04..00000000
--- a/scripts/006-common
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-#
-# Common commands used to configure installed software.
-
-set -xe
-
-# Configure yarn
-if hash yarn 2>/dev/null; then
-    echo 'Found yarn. Configuring it...'
-    yarn config set prefix /usr/local
-    yarn config set -- --emoji true
-fi
-
-# Set up a rust toolchain
-if hash rustup 2>/dev/null; then
-    echo 'Found rust. Configuring the default toolchain...'
-    rustup install stable
-    rustup default stable
-fi
-
-# Start and enable docker
-if hash docker 2>/dev/null; then
-    echo 'Found docker. Requesting administrative rights to configure the service...'
-    sudo systemctl start docker.service
-    sudo systemctl enable docker.service
-fi
-
-# Install vim plugins and make the undo directory
-if hash vim 2>/dev/null; then
-    echo 'Found vim. Making directory for global undo and installing plugins...'
-    mkdir -p ~/.vim/undo
-    curl -fLo ~/.vim/autoload/plug.vim --create-dirs \
-        https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
-    # TODO: Prompt for confirmation before running this script
-    vim +PlugInstall +qall
-fi
-
-# https://github.com/masterkorp/openvpn-update-resolv-conf
-# Note that openresolv should already be installed by netctl.
-if hash openvpn 2>/dev/null; then
-    echo 'Found openvpn. Downloading open-resolv-conf.sh...'
-    sudo curl -fLo /etc/openvpn/update-resolv-conf.sh --create-dirs \
-        https://raw.githubusercontent.com/masterkorp/openvpn-update-resolv-conf/master/update-resolv-conf.sh
-    # TODO: Prompt for confirmation that the script is valid
-fi
-
-# Add user dirs if they don't exist yet (Desktop, Downloads, etc.)
-if hash xdg-user-dirs-update 2>/dev/null; then
-    echo 'Found xdg-user-dirs. Attempting to create directories...'
-    xdg-user-dirs-update
-fi
diff --git a/scripts/arch/001-preinstall b/scripts/arch/001-preinstall
deleted file mode 100644
index aaec1d6a..00000000
--- a/scripts/arch/001-preinstall
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# This script assumes you already have an active internet connection
-# (preferably through Ethernet).
-#
-# https://wiki.archlinux.org/index.php/Installation_guide
-
-set -xe
-
-# Sync the time with one online before doing anything
-timedatectl set-ntp true
-
-# Make a DOS partition table with one primary ext4 partition and
-# enable boot for it. Then, create a primary swap partition with
-# the remaining disk space.
-parted /dev/sda mklabel msdos
-
-parted /dev/sda mkpart primary ext4 1MiB 60GiB
-
-parted /dev/sda set 1 boot on
-
-parted /dev/sda mkpart primary linux-swap 60GiB 100%
-
-# Format sda1 with ext4 and sda2 with swap
-mkfs -t ext4 /dev/sda1
-
-mkswap /dev/sda2
-
-# Enable the swap partition
-swapon /dev/sda2
-
-# Mount the newly created file system (/dev/sda1) to /mnt.
-mount /dev/sda1 /mnt
diff --git a/scripts/arch/002-install b/scripts/arch/002-install
deleted file mode 100644
index 4a6cfe43..00000000
--- a/scripts/arch/002-install
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-#
-# Install the base packages to the mounted partition (the newly
-# created filesystem).
-#
-# We also install grub and fish since grub is the boot loader
-# and fish is the preferred shell.
-#
-# https://wiki.archlinux.org/index.php/Installation_guide
-
-set -xe
-
-pacstrap /mnt base base-devel grub fish
diff --git a/scripts/arch/003-configure b/scripts/arch/003-configure
deleted file mode 100644
index aedaec68..00000000
--- a/scripts/arch/003-configure
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/sh
-#
-# Once this script finishes, change the root password with passwd,
-# then unmount /mnt (with umount) and restart the system.
-#
-# https://wiki.archlinux.org/index.php/Installation_guide
-
-set -xe
-
-echo -n "Enter a hostname for this machine: "
-read HOSTNAME
-
-# Generate the fstab file (so the filesystem is mounted on boot)
-genfstab -U /mnt > /mnt/etc/fstab
-
-# Set the timezone
-arch-chroot /mnt ln -sf /usr/share/zoneinfo/America/New_York /etc/localtime
-
-# Generate /etc/adjtime
-arch-chroot /mnt hwclock --systohc
-
-# Set the hostname
-echo "$HOSTNAME" > /mnt/etc/hostname
-
-# Configure the hosts file (if your system has a permanent IP address, use that instead of 127.0.1.1)
-echo "127.0.0.1 localhost"                          >> /mnt/etc/hosts
-echo "::1       localhost"                          >> /mnt/etc/hosts
-echo "127.0.1.1 $HOSTNAME.localdomain $HOSTNAME"    >> /mnt/etc/hosts
-
-# Set the language to English and use the en_US.UTF-8 locale.
-echo "LANG=en_US.UTF-8"  > /mnt/etc/locale.conf
-echo "en_US.UTF-8 UTF-8" > /mnt/etc/locale.gen
-
-# Generate the locale.
-arch-chroot /mnt locale-gen
-
-# Explicitly set the keymap to US.
-echo "KEYMAP=us" > /mnt/etc/vconsole.conf
-
-# Change the terminal font to a larger one (`latarcyrheb-sun32` is also an option)
-echo "FONT=ter-132n" >> /mnt/etc/vconsole.conf
-
-# Install grub to the primary partition.
-arch-chroot /mnt grub-install /dev/sda
-
-# Prevent the GRUB window from showing at boot, ideal for single OS machines (undo with chroot and mkconfig)
-sed -i '/GRUB_TIMEOUT/c\GRUB_TIMEOUT=0' /mnt/etc/default/grub
-
-# This should make the startup process not output anything (not tested)
-sed -i '/GRUB_CMDLINE_LINUX_DEFAULT/c\GRUB_CMDLINE_LINUX_DEFAULT="quiet show_status=0 rd.udev.log-priority=3 loglevel=3"' /mnt/etc/default/grub
-
-# Make the configuration file for grub.
-arch-chroot /mnt grub-mkconfig -o /boot/grub/grub.cfg
-
-# Change the shell of the root account to fish.
-arch-chroot /mnt chsh -s /usr/bin/fish
-
-# Save our hardware information with mkinitcpio. This creates
-# an initial ramdisk environment that allows us to boot the
-# Linux kernel.
-arch-chroot /mnt mkinitcpio -p linux
diff --git a/scripts/arch/004-postinstall b/scripts/arch/004-postinstall
deleted file mode 100644
index e0446874..00000000
--- a/scripts/arch/004-postinstall
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# Common post-install system configuration that doesn't involve any
-# external packages (besides fish)
-#
-# https://wiki.archlinux.org/index.php/General_recommendations
-
-set -xe
-
-echo -n "Enter a username for the local account with administrative rights: "
-read USERNAME
-
-# Start and enable the DHCP client daemon service
-systemctl start dhcpcd.service
-systemctl enable dhcpcd.service
-
-# Set the timezone with systemd, and sync it periodically with a remote server
-timedatectl set-timezone America/New_York
-timedatectl set-ntp true
-
-# Font settings (https://old.reddit.com/r/archlinux/comments/5r5ep8)
-ln -s /etc/fonts/conf.avail/70-no-bitmaps.conf          /etc/fonts/conf.d   # Disable embedded bitmaps for all fonts
-ln -s /etc/fonts/conf.avail/10-sub-pixel-rgb.conf       /etc/fonts/conf.d   # Enable sub-pixel RGB rendering
-ln -s /etc/fonts/conf.avail/11-lcdfilter-default.conf   /etc/fonts/conf.d   # Enable the LCD filter (reduces color fringing)
-
-# Change the systemd wait time from 90s to 30s, mitigating a potential hang at shutdown
-echo "DefaultTimeoutStartSec=30s" >> /etc/systemd/system.conf
-echo "DefaultTimeoutStopSec=30s"  >> /etc/systemd/system.conf
-
-# Enable colors in pacman by uncommenting the Color line.
-sed -i '/Color/s/^#//g' /etc/pacman.conf
-
-# Give users in the wheel group permission to use sudo
-echo "%wheel ALL=(ALL) ALL" >> /etc/sudoers
-
-# Create a new user account with sudo privileges and the fish shell.
-arch-chroot /mnt useradd -m -g users -G wheel -s /usr/bin/fish "$USERNAME"
-
-# Then, set the password equal to the username (change this later).
-echo "$USERNAME:$USERNAME" | chpasswd