nushell/crates/nu-std/tests/logger_tests/test_logger_env.nu

45 lines
1.2 KiB
Plaintext
Raw Normal View History

Improves startup time when using std-lib (#13842) Updated summary for commit [612e0e2](https://github.com/nushell/nushell/pull/13842/commits/612e0e21602f55092bc121bfd07f7c3bf5119e4f) - While folks are welcome to read through the entire comments, the core information is summarized here. # Description This PR drastically improves startup times of Nushell by only parsing a single submodule of the Standard Library that provides the `banner` and `pwd` commands. All other Standard Library commands and submodules are parsed when imported by the user. This cuts startup times by more than 60%. At the moment, we have stopped adding to `std-lib` because every addition adds a small amount to the Nushell startup time. With this change, we should once again be able to allow new functionality to be added to the Standard Library without it impacting `nu` startup times. # User-Facing Changes * Nushell now starts about 60% faster * Breaking change: The `dirs` (Shells) aliases will return a warning message that it will not be auto-loaded in the following release, along with instructions on how to restore it (and disable the message) * The `use std <submodule> *` syntax is available for convenience, but should be avoided in scripts as it parses the entire `std` module and all other submodules and places it in scope. The correct syntax to *just* load a submodule is `use std/<submodule> *` (asterisk optional). The slash is important. This will be documented. * `use std *` can be used for convenience to load all of the library but still incurs the full loading-time. * `std/dirs`: Semi-breaking change. The `dirs` command replaces the `show` command. This is more in line with the directory-stack functionality found in other shells. Existing users will not be impacted by this as the alias (`shells`) remains the same. * Breaking-change: Technically a breaking change, but probably only impacts maintainers of `std`. The virtual path for the standard library has changed. It could previously be imported using its virtual path (and technically, this would have been the correct way to do it): ```nu use NU_STDLIB_VIRTUAL_DIR/std ``` The path is now simply `std/`: ```nu use std ``` All submodules have moved accordingly. # Timings Comparisons below were made: * In a temporary, clean config directory using `$env.XDG_CONFIG_HOME = (mktemp -d)`. * `nu` was run with a release build * `nu` was run one time to generate the default `config.nu` (etc.) files - Otherwise timings would include the user-prompt * The shell was exited and then restarted several times to get timing samples (Note: Old timings based on 0.97 rather than 0.98, but in the range of being accurate) | Scenario | `$nu.startup-time` | | --- | --- | | 0.97.2 ([aaaab8e](https://github.com/nushell/nushell/commit/aaaab8e070c644a87bbd7682099e3fe9e6a4b42a)) Without this PR | 23ms - 24ms | | This PR with deprecated commands | 9ms - <11ms | | This PR after deprecated commands are removed in following release | 8ms - <10ms | | Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms | | Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms | | Final PR (remove deprecated), using `--no-config-file --no-std-lib` | 1ms - 1.5ms | *These last two timings point to the opportunity for further optimization (see comment in thread below (will link once I write it).* # Implementation details for future maintenance * `use std banner` is a ridiculously deceptive call. That call parses and imports *all* of `std` into scope. Simply replacing it with `use std/core *` is essentially what saves ~14-15ms. This *only* imports the submodule with the `banner` and `pwd` commands. * From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was used as a prefix was so that there wouldn't be an issue if a user had a `./std/mod.nu` in the current directory. This does **not** appear to be an issue. After removing the prefix, I tested with both a relative module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases the *internal* `std` still took precedence. * By removing the prefix, users can now `use std` (and variants) without requiring that it already be parsed and in scope. * In the next release, we'll stop autoloading the `dirs` (shells) functionality. While this only costs an additional 1-1.5ms, I think it's better moved to the `config.nu` where the user can optionally remove it. The main reason is its use of aliases (which have also caused issues) - The `n`, `p`, and `g` short-commands are valuable real-estate, and users may want to map these to something else. For this release, there's an `deprecated_dirs` module that is still autoloaded. As with the top-level commands, use of these will give a deprecation warning with instructions on how to handle going forward. To help with this, moved the aliases to their own submodule inside the `dirs` module. * Also sneaks in a small change where the top-level `dirs` command is now the replacement for `dirs show` * Fixed a double-import of `assert` in `dirs.nu` * The `show_banner` step is replaced with simply `banner` rather than re-importing it. * A `virtual_path` may now be referenced with either a forward-slash or a backward-slash on Windows. This allows `use std/<submodule>` to work on all platforms. # Performance side-notes: * Future parsing and/or IR improvements should improve performance even further. * While the existing load time penalty of `std-lib` was not noticeable on many systems, Nushell runs on a wide-variety of hardware and OS platforms. Slower platforms will naturally see a bigger jump in performance here. For users starting multiple Nushell sessions frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended to keep total startup time (including user configuration) under ~250ms. # Tests + Formatting * All tests are green * Updated tests: - Removed the test that confirmed that `std` was loaded (since we don't). - Removed the `shells` test since it is not autoloaded. Main `dirs.nu` functionality is tested through `stdlib-test`. - Many tests assumed that the library was fully loaded, because it was (even though we didn't intend for it to be). Fixed those tests. - Tests now import only the necessary submodules (e.g., `use std/assert`, rather than `use std assert`) - Some tests *thought* they were loading `std/log`, but were doing so improperly. This was masked by the now-fixed "load-everything-into-scope bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being inherited from the calling process, but would fail in the "clean" GitHub CI environment. These tests have also been fixed. * Added additional tests for the changes # After Submitting Will update the Standard Library doc page
2024-10-03 13:28:22 +02:00
use std/assert
use std/log
use std/log *
Logger constants refactored, `format` argument added, better formatting of failed (non) equality assertions (#9315) # Description I have (hopefully) simplified the `log.nu` internal structure and added customizable log format for all `log` commands # User-Facing Changes - [x] Replaced constants with env records for: - ansi (newly added) - log level - prefix - short prefix - [x] Added `format` argument to all log commands - [x] Assertions for (not) equality (equal, not equal, greater, lesser...) now put left and right values inside `'` quotes, so the assertions for strings are more meaningful - [x] Documented the %-formatting of log messages # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> --------- Co-authored-by: amtoine <stevan.antoine@gmail.com>
2023-06-04 10:43:40 +02:00
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
remove stdlib logging env variables (#12196) # Description This PR removes the environment variables associated with stdlib logging. We need not pollute the environment since it contains a finite amount of space. This PR changes the env vars to exported custom commands.   # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use std testing; testing run-tests --path crates/nu-std"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2024-03-14 12:28:13 +01:00
def env_log-ansi [] {
assert equal (log-ansi).CRITICAL (ansi red_bold)
assert equal (log-ansi).ERROR (ansi red)
assert equal (log-ansi).WARNING (ansi yellow)
assert equal (log-ansi).INFO (ansi default)
assert equal (log-ansi).DEBUG (ansi default_dimmed)
Logger constants refactored, `format` argument added, better formatting of failed (non) equality assertions (#9315) # Description I have (hopefully) simplified the `log.nu` internal structure and added customizable log format for all `log` commands # User-Facing Changes - [x] Replaced constants with env records for: - ansi (newly added) - log level - prefix - short prefix - [x] Added `format` argument to all log commands - [x] Assertions for (not) equality (equal, not equal, greater, lesser...) now put left and right values inside `'` quotes, so the assertions for strings are more meaningful - [x] Documented the %-formatting of log messages # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> --------- Co-authored-by: amtoine <stevan.antoine@gmail.com>
2023-06-04 10:43:40 +02:00
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
remove stdlib logging env variables (#12196) # Description This PR removes the environment variables associated with stdlib logging. We need not pollute the environment since it contains a finite amount of space. This PR changes the env vars to exported custom commands.   # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use std testing; testing run-tests --path crates/nu-std"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2024-03-14 12:28:13 +01:00
def env_log-level [] {
assert equal (log-level).CRITICAL 50
assert equal (log-level).ERROR 40
assert equal (log-level).WARNING 30
assert equal (log-level).INFO 20
assert equal (log-level).DEBUG 10
Logger constants refactored, `format` argument added, better formatting of failed (non) equality assertions (#9315) # Description I have (hopefully) simplified the `log.nu` internal structure and added customizable log format for all `log` commands # User-Facing Changes - [x] Replaced constants with env records for: - ansi (newly added) - log level - prefix - short prefix - [x] Added `format` argument to all log commands - [x] Assertions for (not) equality (equal, not equal, greater, lesser...) now put left and right values inside `'` quotes, so the assertions for strings are more meaningful - [x] Documented the %-formatting of log messages # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> --------- Co-authored-by: amtoine <stevan.antoine@gmail.com>
2023-06-04 10:43:40 +02:00
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
remove stdlib logging env variables (#12196) # Description This PR removes the environment variables associated with stdlib logging. We need not pollute the environment since it contains a finite amount of space. This PR changes the env vars to exported custom commands.   # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use std testing; testing run-tests --path crates/nu-std"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2024-03-14 12:28:13 +01:00
def env_log-prefix [] {
assert equal (log-prefix).CRITICAL "CRT"
assert equal (log-prefix).ERROR "ERR"
assert equal (log-prefix).WARNING "WRN"
assert equal (log-prefix).INFO "INF"
assert equal (log-prefix).DEBUG "DBG"
Logger constants refactored, `format` argument added, better formatting of failed (non) equality assertions (#9315) # Description I have (hopefully) simplified the `log.nu` internal structure and added customizable log format for all `log` commands # User-Facing Changes - [x] Replaced constants with env records for: - ansi (newly added) - log level - prefix - short prefix - [x] Added `format` argument to all log commands - [x] Assertions for (not) equality (equal, not equal, greater, lesser...) now put left and right values inside `'` quotes, so the assertions for strings are more meaningful - [x] Documented the %-formatting of log messages # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> --------- Co-authored-by: amtoine <stevan.antoine@gmail.com>
2023-06-04 10:43:40 +02:00
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
remove stdlib logging env variables (#12196) # Description This PR removes the environment variables associated with stdlib logging. We need not pollute the environment since it contains a finite amount of space. This PR changes the env vars to exported custom commands.   # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use std testing; testing run-tests --path crates/nu-std"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2024-03-14 12:28:13 +01:00
def env_log-short-prefix [] {
assert equal (log-short-prefix).CRITICAL "C"
assert equal (log-short-prefix).ERROR "E"
assert equal (log-short-prefix).WARNING "W"
assert equal (log-short-prefix).INFO "I"
assert equal (log-short-prefix).DEBUG "D"
Logger constants refactored, `format` argument added, better formatting of failed (non) equality assertions (#9315) # Description I have (hopefully) simplified the `log.nu` internal structure and added customizable log format for all `log` commands # User-Facing Changes - [x] Replaced constants with env records for: - ansi (newly added) - log level - prefix - short prefix - [x] Added `format` argument to all log commands - [x] Assertions for (not) equality (equal, not equal, greater, lesser...) now put left and right values inside `'` quotes, so the assertions for strings are more meaningful - [x] Documented the %-formatting of log messages # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> --------- Co-authored-by: amtoine <stevan.antoine@gmail.com>
2023-06-04 10:43:40 +02:00
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def env_log_format [] {
remove underline from std NU_LOG_FORMAT (#10604) # Description This PR removes the underline from the log format. It's been messing things up for me since there is no ansi reset in the log format and therefore everything after it is underlined. This PR should end things like this. ![image](https://github.com/nushell/nushell/assets/343840/17e6dc87-11ba-4395-aac3-f70872b9182a) # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use std testing; testing run-tests --path crates/nu-std"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-10-04 20:30:49 +02:00
assert equal $env.NU_LOG_FORMAT $"%ANSI_START%%DATE%|%LEVEL%|%MSG%%ANSI_STOP%"
}