nushell/crates/nu-std/tests/test_asserts.nu

82 lines
1.7 KiB
Plaintext
Raw Normal View History

use std *
Improves startup time when using std-lib (#13842) Updated summary for commit [612e0e2](https://github.com/nushell/nushell/pull/13842/commits/612e0e21602f55092bc121bfd07f7c3bf5119e4f) - While folks are welcome to read through the entire comments, the core information is summarized here. # Description This PR drastically improves startup times of Nushell by only parsing a single submodule of the Standard Library that provides the `banner` and `pwd` commands. All other Standard Library commands and submodules are parsed when imported by the user. This cuts startup times by more than 60%. At the moment, we have stopped adding to `std-lib` because every addition adds a small amount to the Nushell startup time. With this change, we should once again be able to allow new functionality to be added to the Standard Library without it impacting `nu` startup times. # User-Facing Changes * Nushell now starts about 60% faster * Breaking change: The `dirs` (Shells) aliases will return a warning message that it will not be auto-loaded in the following release, along with instructions on how to restore it (and disable the message) * The `use std <submodule> *` syntax is available for convenience, but should be avoided in scripts as it parses the entire `std` module and all other submodules and places it in scope. The correct syntax to *just* load a submodule is `use std/<submodule> *` (asterisk optional). The slash is important. This will be documented. * `use std *` can be used for convenience to load all of the library but still incurs the full loading-time. * `std/dirs`: Semi-breaking change. The `dirs` command replaces the `show` command. This is more in line with the directory-stack functionality found in other shells. Existing users will not be impacted by this as the alias (`shells`) remains the same. * Breaking-change: Technically a breaking change, but probably only impacts maintainers of `std`. The virtual path for the standard library has changed. It could previously be imported using its virtual path (and technically, this would have been the correct way to do it): ```nu use NU_STDLIB_VIRTUAL_DIR/std ``` The path is now simply `std/`: ```nu use std ``` All submodules have moved accordingly. # Timings Comparisons below were made: * In a temporary, clean config directory using `$env.XDG_CONFIG_HOME = (mktemp -d)`. * `nu` was run with a release build * `nu` was run one time to generate the default `config.nu` (etc.) files - Otherwise timings would include the user-prompt * The shell was exited and then restarted several times to get timing samples (Note: Old timings based on 0.97 rather than 0.98, but in the range of being accurate) | Scenario | `$nu.startup-time` | | --- | --- | | 0.97.2 ([aaaab8e](https://github.com/nushell/nushell/commit/aaaab8e070c644a87bbd7682099e3fe9e6a4b42a)) Without this PR | 23ms - 24ms | | This PR with deprecated commands | 9ms - <11ms | | This PR after deprecated commands are removed in following release | 8ms - <10ms | | Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms | | Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms | | Final PR (remove deprecated), using `--no-config-file --no-std-lib` | 1ms - 1.5ms | *These last two timings point to the opportunity for further optimization (see comment in thread below (will link once I write it).* # Implementation details for future maintenance * `use std banner` is a ridiculously deceptive call. That call parses and imports *all* of `std` into scope. Simply replacing it with `use std/core *` is essentially what saves ~14-15ms. This *only* imports the submodule with the `banner` and `pwd` commands. * From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was used as a prefix was so that there wouldn't be an issue if a user had a `./std/mod.nu` in the current directory. This does **not** appear to be an issue. After removing the prefix, I tested with both a relative module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases the *internal* `std` still took precedence. * By removing the prefix, users can now `use std` (and variants) without requiring that it already be parsed and in scope. * In the next release, we'll stop autoloading the `dirs` (shells) functionality. While this only costs an additional 1-1.5ms, I think it's better moved to the `config.nu` where the user can optionally remove it. The main reason is its use of aliases (which have also caused issues) - The `n`, `p`, and `g` short-commands are valuable real-estate, and users may want to map these to something else. For this release, there's an `deprecated_dirs` module that is still autoloaded. As with the top-level commands, use of these will give a deprecation warning with instructions on how to handle going forward. To help with this, moved the aliases to their own submodule inside the `dirs` module. * Also sneaks in a small change where the top-level `dirs` command is now the replacement for `dirs show` * Fixed a double-import of `assert` in `dirs.nu` * The `show_banner` step is replaced with simply `banner` rather than re-importing it. * A `virtual_path` may now be referenced with either a forward-slash or a backward-slash on Windows. This allows `use std/<submodule>` to work on all platforms. # Performance side-notes: * Future parsing and/or IR improvements should improve performance even further. * While the existing load time penalty of `std-lib` was not noticeable on many systems, Nushell runs on a wide-variety of hardware and OS platforms. Slower platforms will naturally see a bigger jump in performance here. For users starting multiple Nushell sessions frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended to keep total startup time (including user configuration) under ~250ms. # Tests + Formatting * All tests are green * Updated tests: - Removed the test that confirmed that `std` was loaded (since we don't). - Removed the `shells` test since it is not autoloaded. Main `dirs.nu` functionality is tested through `stdlib-test`. - Many tests assumed that the library was fully loaded, because it was (even though we didn't intend for it to be). Fixed those tests. - Tests now import only the necessary submodules (e.g., `use std/assert`, rather than `use std assert`) - Some tests *thought* they were loading `std/log`, but were doing so improperly. This was masked by the now-fixed "load-everything-into-scope bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being inherited from the calling process, but would fail in the "clean" GitHub CI environment. These tests have also been fixed. * Added additional tests for the changes # After Submitting Will update the Standard Library doc page
2024-10-03 13:28:22 +02:00
use std/assert
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_basic [] {
assert true
assert (1 + 2 == 3)
assert error { assert false }
assert error { assert (1 + 2 == 4) }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_not [] {
assert not false
assert not (1 + 2 == 4)
assert error { assert not true }
assert error { assert not (1 + 2 == 3) }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_equal [] {
assert equal (1 + 2) 3
assert equal (0.1 + 0.2 | into string | into float) 0.3 # 0.30000000000000004 == 0.3
assert error { assert equal 1 "foo" }
assert error { assert equal (1 + 2) 4 }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_not_equal [] {
assert not equal (1 + 2) 4
assert not equal 1 "foo"
assert not equal (1 + 2) "3"
assert error { assert not equal 1 1 }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_error [] {
let failing_code = {|| missing_code_to_run}
assert error $failing_code
let good_code = {|| }
Fix `do` signature (#13216) Recommend holding until after #13125 is fully digested and *possibly* until 0.96. # Description Fixes one of the issues described in #13125 The `do` signature included a `SyntaxShape:Any` as one of the possible first-positional types. This is incorrect. `do` only takes a closure as a positional. This had the result of: 1. Moving what should have been a parser error to evaluation-time ## Before ```nu > do 1 Error: nu::shell::cant_convert × Can't convert to Closure. ╭─[entry #26:1:4] 1 │ do 1 · ┬ · ╰── can't convert int to Closure ╰──── ``` ## After ```nu > do 1 Error: nu::parser::parse_mismatch × Parse mismatch during operation. ╭─[entry #5:1:4] 1 │ do 1 · ┬ · ╰── expected block, closure or record ╰──── ``` 2. Masking a bad test in `std assert` This is a bit convoluted, but `std assert` tests included testing `assert error` to make sure it: * Asserts on bad code * Doesn't assert on good code The good-code test was broken, and was essentially bad-code (really bad-code) that wasn't getting caught due to the bad signature. Fixing this resulted in *parse time* failures on every call to `test_asserts` (not something that particular test was designed to handle. This PR also fixes the test case to properly evaluate `std assert error` against a good code path. # User-Facing Changes * Error-type returned (possible breaking change?) # Tests + Formatting - :green_circle: `toolkit fmt` - :green_circle: `toolkit clippy` - :green_circle: `toolkit test` - :green_circle: `toolkit test stdlib` # After Submitting N/A
2024-06-29 23:17:06 +02:00
let assert_error_raised = (try { assert error $good_code; false } catch { true })
assert $assert_error_raised "The assert error should be false if there is no error in the executed code."
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_less [] {
assert less 1 2
assert error { assert less 1 1 }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_less_or_equal [] {
assert less or equal 1 2
assert less or equal 1 1
assert error { assert less or equal 1 0 }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_greater [] {
assert greater 2 1
assert error { assert greater 2 2 }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_greater_or_equal [] {
assert greater or equal 1 1
assert greater or equal 2 1
assert error { assert greater or equal 0 1 }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[test]
def assert_length [] {
assert length [0, 0, 0] 3
assert error { assert length [0, 0] 3 }
}
Implement annotations support in test runner (#9406) <!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description Test runner now uses annotations instead of magic function names to pick up code to run. Additionally skipping tests is now done on annotation level so skipping and unskipping a test no longer requires changes to the test code In order for a function to be picked up by the test runner it needs to meet following criteria: * Needs to be private (all exported functions are ignored) * Needs to contain one of valid annotations (and only the annotation) directly above the definition, all other comments are ignored Following are considered valid annotations: * \# test * \# test-skip * \# before-all * \# before-each * \# after-each * \# after-all # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass - `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
2023-07-02 10:41:33 +02:00
#[ignore]
def assert_skip [] {
assert true # This test case is skipped on purpose
}