1.88.0 was released today, clippy now lints (machine-applicable)
against:
- format strings with empty braces that could be inlined
- easy win
- `manual_abs_diff`
- returning of a stored result of the last expression.
- this can be somewhat contentious but touched only a few places
- improves rounding error reported in #15851
- my ~~discussion~~ monologue on how filesizes are parsed currently:
#15944
# Description
The issue linked above reported rounding errors when converting MiB to
GiB, which is mainly caused by parsing of the literal.
Nushell tries to convert all filesize values to bytes, but currently
does so in 2 steps:
- first converting it to the next smaller unit in `nu-parser` (so `MiB`
to `KiB`, in this case), and truncating to an `i64` here
- then converting that to bytes in `nu-engine`, again truncating to
`i64`
In the specific example above (`95307.27MiB`), this causes 419 bytes of
rounding error. By instead directly converting to bytes while parsing,
the value is accurate (truncating those 0.52 bytes, or 4.12 bits).
Rounding error in the conversion to GiB is also multiple magnitudes
lower.
(Note that I haven't thoroughly tested this, so I can't say with
confidence that all values would be parsed accurate to the byte.)
# User-Facing Changes
More accurate filesize values, and lower accumulated rounding error in
calculations.
# Tests + Formatting
new test: `parse_filesize` in `nu-parser` - verifies that `95307.27MiB`
is parsed correctly as `99_936_915_947B`
# After Submitting
# Description
Bump nushell to development version.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Hello!
This is my 1st contribution and an attempt at fixing #15417.
# Description
When parsing a brace expression, check if the shape is a block or match
block before attempting to parse it as a closure.
Results:
- `if true {|| print hi}` now produces a `nu::parser` error instead of
executing and outputting `hi`. The `nu::parser` error is the same one
produced by running `|| print hi` (`nu::parser::shell_oror`)
- `match true {|| print hi}` now fails with a `nu::parser` error instead
of passing parsing and failing with `nu::compile::invalid_keyword_call`
My understanding reading the code/docs is that the shape is a contextual
constraint that needs to be satisfied for parsing to succeed, in this
case the `if` placing a `Block` shape constraint on next tokens. So it
would need to be checked in priority (if not `Any`) to understand how
the next tokens should be parsed. Is that correct? Or is there a reason
I'm not aware of to ignore the shape and attempt to parse as closure
like it's currently the case when the parser sees `|` or `||` as next
tokens?
# User-Facing Changes
No change in behaviour, but this PR fixes parsing to fail on some
incorrect syntax which could be considered a breaking change.
# Tests + Formatting
- Added corresponding tests
- `toolkit check pr` passed
# Description
Fixes: https://github.com/nushell/nushell/issues/15749
When sourcing a file, the ir block might be empty because it has been
used before, this pr is going to make sure that the ir block is
compiled.
# User-Facing Changes
```
touch aaa.nu
use aaa.nu
source aaa.nu
```
Will no longer raise an error.
# Tests + Formatting
Added 1 test
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Bump dev version to 0.104.2
Related:
- #15683
- #14551
- #849
- #12701
- #11527
# Description
Currently various commands have differing behavior regarding cell-paths
```nushell
{a: 1, A: 2} | get a A
# => ╭───┬───╮
# => │ 0 │ 2 │
# => │ 1 │ 2 │
# => ╰───┴───╯
{a: 1, A: 2} | select a A
# => ╭───┬───╮
# => │ a │ 1 │
# => │ A │ 2 │
# => ╰───┴───╯
{A: 1} | update a 2
# => Error: nu:🐚:column_not_found
# =>
# => × Cannot find column 'a'
# => ╭─[entry #62:1:1]
# => 1 │ {A: 1} | update a 2
# => · ───┬── ┬
# => · │ ╰── cannot find column 'a'
# => · ╰── value originates here
# => ╰────
```
Proposal: making cell-path access case-sensitive by default and adding
new syntax for case-insensitive parts, similar to optional (?) parts.
```nushell
{FOO: BAR}.foo
# => Error: nu:🐚:name_not_found
# =>
# => × Name not found
# => ╭─[entry #60:1:21]
# => 1 │ {FOO: BAR}.foo
# => · ─┬─
# => · ╰── did you mean 'FOO'?
# => ╰────
{FOO: BAR}.foo!
# => BAR
```
This would solve the problem of case sensitivity for all commands
without causing an explosion of flags _and_ make it more granular
Assigning to a field using a case-insensitive path is case-preserving.
```nushell
mut val = {FOO: "I'm FOO"}; $val
# => ╭─────┬─────────╮
# => │ FOO │ I'm FOO │
# => ╰─────┴─────────╯
$val.foo! = "I'm still FOO"; $val
# => ╭─────┬───────────────╮
# => │ FOO │ I'm still FOO │
# => ╰─────┴───────────────╯
```
For `update`, case-insensitive is case-preserving.
```nushell
{FOO: 1} | update foo! { $in + 1 }
# => ╭─────┬───╮
# => │ FOO │ 2 │
# => ╰─────┴───╯
```
`insert` can insert values into nested values so accessing into existing
columns is case-insensitive, but creating new columns uses the cell-path
as it is.
So `insert foo! ...` and `insert FOO! ...` would work exactly as they do
without `!`
```nushell
{FOO: {quox: 0}}
# => ╭─────┬──────────────╮
# => │ │ ╭──────┬───╮ │
# => │ FOO │ │ quox │ 0 │ │
# => │ │ ╰──────┴───╯ │
# => ╰─────┴──────────────╯
{FOO: {quox: 0}} | insert foo.bar 1
# => ╭─────┬──────────────╮
# => │ │ ╭──────┬───╮ │
# => │ FOO │ │ quox │ 0 │ │
# => │ │ ╰──────┴───╯ │
# => │ │ ╭─────┬───╮ │
# => │ foo │ │ bar │ 1 │ │
# => │ │ ╰─────┴───╯ │
# => ╰─────┴──────────────╯
{FOO: {quox: 0}} | insert foo!.bar 1
# => ╭─────┬──────────────╮
# => │ │ ╭──────┬───╮ │
# => │ FOO │ │ quox │ 0 │ │
# => │ │ │ bar │ 1 │ │
# => │ │ ╰──────┴───╯ │
# => ╰─────┴──────────────╯
```
`upsert` is tricky, depending on the input, the data might end up with
different column names in rows. We can either forbid case-insensitive
cell-paths for `upsert` or trust the user to keep their data in a
sensible shape.
This would be a breaking change as it would make existing cell-path
accesses case-sensitive, however the case-sensitivity is already
inconsistent and any attempt at making it consistent would be a breaking
change.
> What about `$env`?
1. Initially special case it so it keeps its current behavior.
2. Accessing environment variables with non-matching paths gives a
deprecation warning urging users to either use exact casing or use the
new explicit case-sensitivity syntax
3. Eventuall remove `$env`'s special case, making `$env` accesses
case-sensitive by default as well.
> `$env.ENV_CONVERSIONS`?
In addition to `from_string` and `to_string` add an optional field to
opt into case insensitive/preserving behavior.
# User-Facing Changes
- `get`, `where` and other previously case-insensitive commands are now
case-sensitive by default.
- `get`'s `--sensitive` flag removed, similar to `--ignore-errors` there
is now an `--ignore-case` flag that treats all parts of the cell-path as
case-insensitive.
- Users can explicitly choose the case case-sensitivity of cell-path
accesses or commands.
# Tests + Formatting
Existing tests required minimal modification. ***However, new tests are
not yet added***.
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
- Update the website to include the new syntax
- Update [tree-sitter-nu](https://github.com/nushell/tree-sitter-nu)
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
- fixes#15731
# Description
Existing bare word string interpolation only works if the string doesn't
start with a subxpression.
```nushell
echo fork(2)
# => fork2
echo (2)fork
# => Error: nu::parser::unclosed_delimiter
# =>
# => × Unclosed delimiter.
# => ╭─[entry #25:1:13]
# => 1 │ echo (2)fork
# => ╰────
```
This PR lifts that restriction.
```nushell
echo fork(2)
# => fork2
echo (2)fork
# => 2fork
```
This was first brought to my attention on discord with the following
command failing to parse.
```nushell
docker run -u (id -u):(id -g)
```
It now works.
# User-Facing Changes
# Tests + Formatting
No existing test broke or required tweaking. Additional tests covering
this case was added.
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
# Description
See [this
discussion](https://discord.com/channels/601130461678272522/1353434388938883143/1360664695962341647)
on discord
Goal: as the AST evaluator isn't supported anymore, I removed the body
of the "run" methods of some commands that were actually never run
because the IR is used instead.
Note: the code inside the "run_const" methods seems to be run, so I left
it.
Cc @132ikl
# User-Facing Changes
None
# Tests + Formatting
I didn't do any manual testing, I just ran the tests
# After Submitting
Nothing required I think
Closes#12858
# Description
As explained in the ticket, easy to reproduce. Example: 1.07 minute is
1.07*60=64.2 secondes
```nushell
# before - wrong
> 1.07min
1min 4sec
# now - right
> 1.07min
1min 4sec 200ms
```
# User-Facing Changes
Bug is fixed when using ``into duration``.
# Tests + Formatting
Added a test for ``into duration``
Fixed ``parse_long_duration`` test: we gained precision 😄
# After Submitting
Release notes? Or blog is enough? Let me know
Closes#15502
# Description
The parsing of Exbibytes used the wrong base unit before converting.
# User-Facing Changes
`1EiB` etc. will now be parsed correctly
# Tests + Formatting
(-)
# Description
There are some clippy(version 0.1.86) errors on nushell repo. This pr is
trying to fix it.
# User-Facing Changes
Hopefully none.
# Tests + Formatting
NaN
# After Submitting
NaN
Fixes#14972#15321#14706
# Description
Early returns `NotAConstant` if parsing errors exist in the
subexpression.
I'm not sure when the span of a block will be None, and whether there're
better ways to handle none block spans, like a more suitable ShellError
type.
# User-Facing Changes
# Tests + Formatting
+1, but possibly not the easiest way to do it.
# After Submitting
Closes#15305
# Description
Basically turns off `skip_comments` of the lex function for right hand
side expressions of `let`/`mut`, just as in `parse_const`.
# User-Facing Changes
Should be none.
# Tests + Formatting
+1
# After Submitting
Closes#15373
# Description
Now `ast -f "{||}"` will return
```
╭─content─┬─────shape─────┬─────span──────╮
│ {||} │ shape_closure │ ╭───────┬───╮ │
│ │ │ │ start │ 0 │ │
│ │ │ │ end │ 4 │ │
│ │ │ ╰───────┴───╯ │
╰─────────┴───────────────┴───────────────╯
```
Similar to those of `ast -f "[]"`/`ast -f "{}"`
# User-Facing Changes
# Tests + Formatting
I didn't find the right place to do the test, except for the examples of
`ast` command.
# After Submitting
Fixes#15243
# Description
As noted in #15243, a record with more characters after it (e.g.,
`{a:b}/`) will cause an OOM due to an infinite loop, introduced by
#15023. This happens because the entire string `{a:b}/` is lexed as one
token and passed to `parse_record`, where it repeatedly lexes until it
hits the closing `}`. This PR detects such extra characters and reports
an error.
# User-Facing Changes
`{a:b}/` and other such constructions will no longer cause infinite
loops. Before #15023, you would've seen an "Unclosed delimiter" error
message, but this PR changes that to "Invalid characters."
```
Error: nu::parser::extra_token_after_closing_delimiter
× Invalid characters after closing delimiter
╭─[entry #5:1:7]
1 │ {a:b}/
· ┬
· ╰── invalid characters
╰────
help: Try removing them.
```
# Tests + Formatting
# After Submitting
Fixes#14971, fixes#15229
# User-Facing Changes
Fixes a panic when variable data is accessed after invalid usage of the
`|` separator, which made it impossible to type certain match arms:
```nushell
> match $in { 1 |
Error: x Main thread panicked.
|-> at crates/nu-protocol/src/engine/state_delta.rs💯14
`-> internal error: missing required scope frame
```
# Description
Removes duplicative calls to `exit_scope` from an inner loop when `|`
parse errors are encountered. The outer loop creates and exits scopes
for each match arm.
# Description
This PR adds the `@category` attribute to nushell for use with custom
commands.
### Example Code
```nushell
# Some example with category
@category "math"
@search-terms "addition"
@example "add two numbers together" {
blah 5 6
} --result 11
def blah [
a: int # First number to add
b: int # Second number to add
] {
$a + $b
}
```
#### Source & Help
```nushell
❯ source blah.nu
❯ help blah
Some example with category
Search terms: addition
Usage:
> blah <a> <b>
Flags:
-h, --help: Display the help message for this command
Parameters:
a <int>: First number to add
b <int>: Second number to add
Input/output types:
╭─#─┬─input─┬─output─╮
│ 0 │ any │ any │
╰───┴───────┴────────╯
Examples:
add two numbers together
> blah 5 6
11
```
#### Show the category
```nushell
❯ help commands | where name == blah
╭─#─┬─name─┬─category─┬─command_type─┬────────description─────────┬─────params─────┬──input_output──┬─search_terms─┬─is_const─╮
│ 0 │ blah │ math │ custom │ Some example with category │ [table 3 rows] │ [list 0 items] │ addition │ false │
╰───┴──────┴──────────┴──────────────┴────────────────────────────┴────────────────┴────────────────┴──────────────┴──────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
/cc @Bahex
# Description
`overlay use` now imports constants exported from modules, just like
`use`.
```nushell
# foo.nu
export const a = 1
export const b = 2
```
- `overlay use foo.nu` being equivalent to `use foo.nu *` and exposing
constants `$a = 1` and `$b = 2`
- `overlay use foo.nu -p` being equivalent to `use foo.nu` and exposing
the constant `$foo = {a: 1, b: 2}`
# User-Facing Changes
`overlay use` now imports constants just like `use`.
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
# Description
This PR adds two new `ParseError` and `ShellError` cases for type errors
relating to operators.
- `OperatorUnsupportedType` is used when a type is not supported by an
operator in any way, shape, or form. E.g., `+` does not support `bool`.
- `OperatorIncompatibleTypes` is used when a operator is used with types
it supports, but the combination of types provided cannot be used
together. E.g., `filesize + duration` is not a valid combination.
The other preexisting error cases related to operators have been removed
and replaced with the new ones above. Namely:
- `ShellError::OperatorMismatch`
- `ShellError::UnsupportedOperator`
- `ParseError::UnsupportedOperationLHS`
- `ParseError::UnsupportedOperationRHS`
- `ParseError::UnsupportedOperationTernary`
# User-Facing Changes
- `help operators` now lists the precedence of `not` as 55 instead of 0
(above the other boolean operators). Fixes#13675.
- `math median` and `math mode` now ignore NaN values so that `[NaN NaN]
| math median` and `[NaN NaN] | math mode` no longer trigger a type
error. Instead, it's now an empty input error. Fixing this in earnest
can be left for a future PR.
- Comparisons with `nan` now return false instead of causing an error.
E.g., `1 == nan` is now `false`.
- All the operator type errors have been standardized and reworked. In
particular, they can now have a help message, which is currently used
for types errors relating to `++`.
```nu
[1] ++ 2
```
```
Error: nu::parser::operator_unsupported_type
× The '++' operator does not work on values of type 'int'.
╭─[entry #1:1:5]
1 │ [1] ++ 2
· ─┬ ┬
· │ ╰── int
· ╰── does not support 'int'
╰────
help: if you meant to append a value to a list or a record to a table, use the `append` command or wrap the value in a list. For example: `$list ++ $value` should be
`$list ++ [$value]` or `$list | append $value`.
```
# Description
Zyphys found that when parsing `{...{}, ...{}, a: 1}`, the `a:` would be
considered one token, leading to a parse error ([Discord
message](https://discord.com/channels/601130461678272522/614593951969574961/1336762075535511573)).
This PR fixes that.
What would happen is that while getting tokens, the following would
happen in a loop:
1. Get the next two tokens while treating `:` as a special character (so
we get the next field key and a colon token)
2. Get the next token while not treating `:` as a special character (so
we get the next value)
I didn't update this when I added the spread operator. With `{...{},
...{}, a: 1}`, the first two tokens would be `...{}` and `...{}`, and
the next token would be `a:`. This PR changes this loop to first get a
single token, check if it's spreading a record, and move on if so.
Alternatives considered:
- Treat `:` as a special character when getting the value too. This
would simplify the loop greatly, but would mean you can't use colons in
values.
- Merge the loop for getting tokens and the loop for parsing those
tokens. I tried this, but it complicates things if you run into a syntax
error and want to create a garbage span going to the end of the record.
# User-Facing Changes
Nothing new
# Description
Add custom command attributes.
- Attributes are placed before a command definition and start with a `@`
character.
- Attribute invocations consist of const command call. The command's
name must start with "attr ", but this prefix is not used in the
invocation.
- A command named `attr example` is invoked as an attribute as
`@example`
- Several built-in attribute commands are provided as part of this PR
- `attr example`: Attaches an example to the commands help text
```nushell
# Double numbers
@example "double an int" { 5 | double } --result 10
@example "double a float" { 0.5 | double } --result 1.0
def double []: [number -> number] {
$in * 2
}
```
- `attr search-terms`: Adds search terms to a command
- ~`attr env`: Equivalent to using `def --env`~
- ~`attr wrapped`: Equivalent to using `def --wrapped`~ shelved for
later discussion
- several testing related attributes in `std/testing`
- If an attribute has no internal/special purpose, it's stored as
command metadata that can be obtained with `scope commands`.
- This allows having attributes like `@test` which can be used by test
runners.
- Used the `@example` attribute for `std` examples.
- Updated the std tests and test runner to use `@test` attributes
- Added completions for attributes
# User-Facing Changes
Users can add examples to their own command definitions, and add other
arbitrary attributes.
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
- Add documentation about the attribute syntax and built-in attributes
- `help attributes`
---------
Co-authored-by: 132ikl <132@ikl.sh>
# Description
Fixes: #15049
The error occurs when using an alias with a module prefix, it can
initially pass through alias checking, but if the alias leads to
commands which have side effects, it doesn't call these functions to
apply side effects.
This pr ensure that in such cases, nushell still calls
`parse_overlay_xxx` functions to apply the side effects.
I want to make my test easier to write, so this pr depends on
https://github.com/nushell/nushell/pull/15054.
# User-Facing Changes
The following code will no longer raise an error:
```
module inner {}
module spam { export alias b = overlay use inner }
use spam
spam b
```
# Tests + Formatting
Added 2 tests.
# After Submitting
NaN
# Description
Fixes: #15048
The issue is happened while `parse_export_in_block`, it makes a call to
`parse_internal_call`, which may be an error.
But in reality, these errors are not useful, all useful errors will be
generated by `parse_xxx` at the end of the function.
# User-Facing Changes
The following code should no longer raise error:
```
export alias a = overlay use
```
# Tests + Formatting
Added 1 test.
# After Submitting
NaN
# Description
The parsing logic for several of our keywords is conditional on the
particular commands for those keywords being in scope:
942030199d/crates/nu-parser/src/parse_keywords.rs (L272-L279)
Thus the following involved parsing logic was not fuzzed by the existing
`parse` fuzz target so far.
This adds an additional fuzz target `parse_with_keywords` that loads the
commands from `nu-cmd-lang`. Those are primarily the keyword
implementations, thus the relevant code paths in the parser that depend
on those `DeclId`s and the potential const eval of `if` etc. get
unlocked.
The existing `parse` target is preserved if you have concerns about the
fuzzing breaking containment in some form due to those commands.
# Tests + Formatting
Found https://github.com/nushell/nushell/issues/14972 with this target
# Description
- Remove redundant fields from KnownExternal
- Command::extra_description and Command::search_terms using the
signature field
# User-Facing Changes
`extern` commands extra description is now shown in help text.
# Tests + Formatting
# After Submitting
# Description
This PR fixes#14784.
<img width="384" alt="image"
src="https://github.com/user-attachments/assets/aac063a0-645d-4adb-a399-525bdb004999"
/>
Also fixes the related behavior of lsp:
completion won't work in match/else blocks, because:
1. truncation in completion causes unmatched `{`, thus a parse error.
2. the parse error further leads to a state where the whole block
expression marked as garbage
<img width="453" alt="image"
src="https://github.com/user-attachments/assets/aaf86ccc-646e-4b91-bb27-4b1737100ff2"
/>
Related PR: #14856, @tmillr
I don't have any background knowledge of those `propagate_error`,
@sgvictorino you may want to review this.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
This PR fixes#14816 , so that expression-contains-position check won't
need special treatment for keyword expressions.
e.g.
```nushell
overlay use foo as bar
# |_______ cursor here
if true { } else { }
# |_______ here
```
as mentioned in #14924
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
This PR replaces most of the constants in `ResolvedImportPattern` from
values to VarIds, this has benefits of:
1. less duplicated variables in state
2. precise span of variable, for example when calling `goto def` on a
const imported by the `use` command, this allows it to find the original
definition, instead of where the `use` command is.
Note that the logic is different here for nested submodules, not all
values are flattened and propagated to the outmost record variable, but
I didn't find any differences in real world usage.
I noticed that it was changed from `VarId` to `Value` in #10049.
Maybe @kubouch can find some edge cases where this PR fails to work as
expected.
In my view, the record constants for `ResolvedImportPattern` should even
reduced to single entry, if not able to get rid of.
# User-Facing Changes
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
A simple method found by @tmillr to solve [this
issue](https://github.com/nushell/nushell/discussions/14854)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I didn't find a suitable place in `nu-parser` to add the test case,
placed in `nu-lsp` instead.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #14844
The issue occurs when nushell is parsing a value with
`SyntaxShape::Any`, it checks `Duration` and `Filesize` first, then
`Range`. Nushell raises errors too early while parsing
`Duration/Filesize`.
This pr changes the order of parsing to fix the issue.
# User-Facing Changes
The following code should be able to run after this pr
```nushell
let runs = 10;
1..$runs
```
# Tests + Formatting
Added 2 tests, one for filesize, one for duration.
# After Submitting
NaN
# Description
This PR add 2 new operators, `has` and `not-has`. They are basically
`in` and `not-in` with the order of operands swapped.
Motivation for this was the awkward way of searching for rows that
contain an item using `where`
```nushell
[[name, children]; [foo, [a, b, c]], [bar [d, e, f]]]
| where ("e" in $it.children)
```
vs
```nushell
[[name, children]; [foo, [a, b, c]], [bar [d, e, f]]]
| where children has "e"
```
# User-Facing Changes
Added `has` and `not-has` operators, mirroring `in` and `not-in`.
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Follow-up PR of #14789
The span of `$it/$in` is set to a 0-width one with start/end pointing to
the start of its scope, mainly for error messages positioning.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR addresses the issue of inconsistent spans of special variables
of `$in/$in`, as discussed in
https://github.com/nushell/nushell/pull/14770#discussion_r1908729364.
Instead of making the `declaration_span` to be Option, which will cause
too many changes that we may want to avoid, this PR set the spans to be
`unknown`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
