# Release-Notes Short Description
* Nushell now always loads its internal `default_env.nu` before the user
`env.nu` is loaded, then loads the internal `default_config.nu` before
the user's `config.nu` is loaded. This allows for a simpler
user-configuration experience. The Configuration Chapter of the Book
will be updated soon with the new behavior.
# Description
Implements the main ideas in #13671 and a few more:
* Users can now specify only the environment and config options they
want to override in *their* `env.nu` and `config.nu`and yet still have
access to all of the defaults:
* `default_env.nu` (internally defined) will be loaded whenever (and
before) the user's `env.nu` is loaded.
* `default_config.nu` (internally defined) will be loaded whenever (and
before) the user's `config.nu` is loaded.
* No more 900+ line config out-of-the-box.
* Faster startup (again): ~40-45% improvement in launch time with a
default configuration.
* New keys that are added to the defaults in the future will
automatically be available to all users after updating Nushell. No need
to regenerate config to get the new defaults.
* It is now possible to have different internal defaults (which will be
used with `-c` and scripts) vs. REPL defaults. This would have solved
many of the user complaints about the [`display_errors`
implementation](https://www.nushell.sh/blog/2024-09-17-nushell_0_98_0.html#non-zero-exit-codes-are-now-errors-toc).
* A basic "scaffold" `config.nu` and `env.nu` are created on first
launch (if the config directory isn't present).
* Improved "out-of-the-box" experience (OOBE) - No longer asks to create
the files; the minimal scaffolding will be automatically created. If
deleted, they will not be regenerated. This provides a better
"out-of-the-box" experience for the user as they no longer have to make
this decision (without much info on the pros or cons) when first
launching.
* <s>(New: 2024-11-07) Runs the env_conversions process after the
`default_env.nu` is loaded so that users can treat `Path`/`PATH` as
lists in their own config.</s>
* (New: 2024-11-08) Given the changes in #13802, `default_config.nu`
will be a minimal file to minimize load-times. This shaves another (on
my system) ~3ms off the base launch time.
* Related: Keybindings, menus, and hooks that are already internal
defaults are no longer duplicated in `$env.config`. The documentation
will be updated to cover these scenarios.
* (New: 2024-11-08) Move existing "full" `default_config.nu` to
`sample_config.nu` for short-term "documentation" purposes.
* (New: 2024-11-18) Move the `dark-theme` and `light-theme` to Standard
Library and demonstrate their use - Also improves startup times, but
we're reaching the limit of optimization.
* (New: 2024-11-18) Extensively documented/commented `sample_env.nu` and
`sample_config.nu`. These can be displayed in-shell using (for example)
`config nu --sample | nu-highlight | less -R`. Note: Much of this will
eventually be moved to or (some) duplicated in the Doc. But for now,
this some nice in-shell doc that replaces the older
"commented/documented default".
* (New: 2024-11-20) Runs the `ENV_CONVERSIONS` process (1) after the
`default_env.nu` (allows `PATH` to be used as a list in user's `env.nu`)
and (2) before `default_config.nu` is loaded (allows user's
`ENV_CONVERSIONS` from their `env.nu` to be used in their `config.nu`).
* <s>(New: 2024-11-20) The default `ENV_CONVERSIONS` is now an empty
record. The internal Rust code handles `PATH` (and variants) conversions
regardless of the `ENV_CONVERSIONS` variable. This shaves a *very* small
amount of time off the startup.</s> Reset - Looks like there might be a
bug in `nu-enginer::env::ensure_path()` on Windows that would need to be
fixed in order for this to work.
# User-Facing Changes
By default, you shouldn't see much, if any, change when running this
with your existing configuration.
To see the greatest benefit from these changes, you'll probably want to
start with a "fresh" config. This can be easily tested using something
like:
```nushell
let temp_home = (mktemp -d)
$env.XDG_CONFIG_HOME = $temp_home
$env.XDG_DATA_HOME = $temp_home
./target/release/nu
```
You should see a message where the (mostly empty) `env.nu` and
`config.nu` are created on first start. Defaults should be the same (or
similar to) those before the PR. Please let me know if you notice any
differences.
---
Users should now specify configuration in terms of overrides of each
setting. For instance, rather than modifying `history` settings in the
monolithic `config.nu`, the following is recommended in an updated
`config.nu`:
```nu
$env.config.history = {
file_format: sqlite,
sync_on_enter: true
isolation: true
max_size: 1_000_000
}
```
or even just:
```nu
$env.config.history.file_format = sqlite
$env.config.history.isolation: true
$env.config.history.max_size = 1_000_000
```
Note: It seems many users are already appending a `source my_config.nu`
(or similar pattern) to the end of the existing `config.nu` to make
updates easier. In this case, they will likely want to remove all of the
previous defaults and just move their `my_config.nu` to `config.nu`.
Note: It should be unlikely that there are any breaking changes here,
but there's a slim chance that some code, somewhere, *expects* an
absence of certain config values. Otherwise, all config values are
available before and after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Configuration Chapter (and related) of the doc is currently WIP and will
be finished in time for 0.101 release.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Bump version to `0.100.0`
# User-Facing Changes
The new release `v0.100.0` is coming...
# Description
Follow-up to #13842. In that commit, using one of the `dirs`/`shells`
aliases would notify the user that it would no longer be autoloaded in
future releases. This is the removal stage.
Side-benefit: Additional 1ms+ load time improvement
# User-Facing Changes
Breaking-change - `dirs` aliases are no longer autoloaded.
Users can either choose to continue using the aliases by adding the
following to the startup:
```nu
use std/dirs shells-aliases *
```
Alternatively, users can use the `dirs` subcommands (rather than the
aliases) with:
```nu
use std/dirs
```
# Description
This PR adds `like` as a synonym for `=~` and `not-like` as a synonym
for `!~`. This is mainly a quality-of-life change to help those people
who think in sql.
closes#13261
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds `like` as a synonym for `=~` and `not-like` as a synonym
for `!~`. This is mainly a quality-of-life change to help those people
who think in sql.
closes#13261
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Uses "normal" module `std/<submodule>/mod.nu` instead of renaming the
files (as requested in #13842).
# User-Facing Changes
No user-facing changes other than in `view files` results. Imports
remain the same after this PR.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Also manually confirmed that it does not interfere with nupm, since we
did have a conflict at one point (and it's not possible to test here).
# Performance Tests
## Linux
### Nushell Startup - No config
```nu
bench --pretty -n 200 { <path_to>/nu -c "exit" }
```
| Release | Startup Time |
| --- | --- |
| 0.98.0 | 22ms 730µs 768ns +/- 1ms 515µs 942ns
| This commit | 9ms 312µs 68ns +/- 709µs 378ns
| Yesterday's nightly | 9ms 230µs 953ns +/- 9ms 67µs 689ns
### Nushell Startup - Load full standard library
Measures relative impact of a full `use std *`, which isn't recommended,
but worth tracking.
```nu
bench --pretty -n 200 { <path_to>/nu -c "use std *; exit" }
```
| Release | Startup Time |
| --- | --- |
| 0.98.0 | 23ms 10µs 636ns +/- 1ms 277µs 854ns
| This commit | 26ms 922µs 769ns +/- 562µs 538ns
| Yesterday's nightly | 28ms 133µs 95ns +/- 761µs 943ns
| `deprecated_dirs` removal PR * | 23ms 610µs 333ns +/- 369µs 436ns
\* Current increase is partially due to double-loading `dirs` with
removal warning in older version.
# After Submitting
Still TODO - Update standard library doc
# Description
* Primary purpose is to fix an issue with a missing escaped opening
parenthesis in the warning message when running an old `dirs` alias.
This was creating an error condition from improper interpolation.
Also
* Incorporates #13842 feedback from @kubouch by renaming `std/lib` to
`std/util`
* Removes duplication of code in `export-env`
* Renames submodule exports to `std/<submodule>` rather than
`./<submodule>` - No user-facing change other than `view files` appears
"prettier".
* In #13842, I converted the test cases to use `use std/<module>`
syntax. Previously, the tests were (effectively) using `use std *` (due
to pre-existing bugs, now fixed).
So "before", we only had test coverage on `use std *`, and "after" we
only had test coverage on `use std/<module>`. I've started adding test
cases so that we have coverage on *both* scenarios going forward.
For now, `formats` and `util` have been updated with tests for both
scenarios. I'll continue adding the others in future PRs.
# User-Facing Changes
No user-facing changes - Bug fix, refactor, and test cases only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Still working on updating the Doc. I ran into the `dirs` issue while
writing it and rabbit-trailed to fix it in this PR.
# Description
After a `use std *`, the environment variables exported from the
submodules' `export-env` blocks are not available because of #13403.
This causes failures in `log` (currently) and will cause issues in
`dirs` once we stop autoloading it separately.
When the submodules are loaded separately (e.g., `use std/log`),
everything already worked correctly. While this is the preferred way of
doing it, we also want `use std *` to work properly.
This is a workaround for the standard library submodules. It is
definitely not ideal, but it can be removed when and if #13403 is fixed.
For now, we need to duplicate any environment settings in both the
submodules (when loaded with `use std/log`) and in the standard library
itself (when loaded with `use std *`). Again, this should not be
necessary, but currently is because of #13403.
# User-Facing Changes
Bug fix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fxes https://github.com/nushell/nupm/issues/102
Not loading `std` at startup has caused an issue with nupm and std where
the `dirs` module name clashes and nupm won't load. This was technically
a preexisting bug that was previously masked. This could have been fixed
(and also should be) by changing the import statement in nupm, but the
potential for collision would remain in other (user) modules.
This PR explicitly sets the relative path for the import statements in
`std/mod.nu` so that there are no collisions.
# User-Facing Changes
Bugfix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
@kubouch noticed that the warning message from #13842 when using a
"Shells" alias mentioned `config.nu`, but he's using it in the prompt
which means loading it in `env.nu`. Updated the warning message to:
> ... feature, and to remove this warning, please add the following
> to your startup configuration (typically env.nu or config.nu):
# User-Facing Changes
No change in functionality - More clear instructions, hopefully.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Doc and release notes still to be updated for #13842
Updated summary for commit
[612e0e2](612e0e2160)
- While folks are welcome to read through the entire comments, the core
information is summarized here.
# Description
This PR drastically improves startup times of Nushell by only parsing a
single submodule of the Standard Library that provides the `banner` and
`pwd` commands. All other Standard Library commands and submodules are
parsed when imported by the user. This cuts startup times by more than
60%.
At the moment, we have stopped adding to `std-lib` because every
addition adds a small amount to the Nushell startup time.
With this change, we should once again be able to allow new
functionality to be added to the Standard Library without it impacting
`nu` startup times.
# User-Facing Changes
* Nushell now starts about 60% faster
* Breaking change: The `dirs` (Shells) aliases will return a warning
message that it will not be auto-loaded in the following release, along
with instructions on how to restore it (and disable the message)
* The `use std <submodule> *` syntax is available for convenience, but
should be avoided in scripts as it parses the entire `std` module and
all other submodules and places it in scope. The correct syntax to
*just* load a submodule is `use std/<submodule> *` (asterisk optional).
The slash is important. This will be documented.
* `use std *` can be used for convenience to load all of the library but
still incurs the full loading-time.
* `std/dirs`: Semi-breaking change. The `dirs` command replaces the
`show` command. This is more in line with the directory-stack
functionality found in other shells. Existing users will not be impacted
by this as the alias (`shells`) remains the same.
* Breaking-change: Technically a breaking change, but probably only
impacts maintainers of `std`. The virtual path for the standard library
has changed. It could previously be imported using its virtual path (and
technically, this would have been the correct way to do it):
```nu
use NU_STDLIB_VIRTUAL_DIR/std
```
The path is now simply `std/`:
```nu
use std
```
All submodules have moved accordingly.
# Timings
Comparisons below were made:
* In a temporary, clean config directory using `$env.XDG_CONFIG_HOME =
(mktemp -d)`.
* `nu` was run with a release build
* `nu` was run one time to generate the default `config.nu` (etc.) files
- Otherwise timings would include the user-prompt
* The shell was exited and then restarted several times to get timing
samples
(Note: Old timings based on 0.97 rather than 0.98, but in the range of
being accurate)
| Scenario | `$nu.startup-time` |
| --- | --- |
| 0.97.2
([aaaab8e](aaaab8e070))
Without this PR | 23ms - 24ms |
| This PR with deprecated commands | 9ms - <11ms |
| This PR after deprecated commands are removed in following release |
8ms - <10ms |
| Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms |
| Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms
|
| Final PR (remove deprecated), using `--no-config-file --no-std-lib` |
1ms - 1.5ms |
*These last two timings point to the opportunity for further
optimization (see comment in thread below (will link once I write it).*
# Implementation details for future maintenance
* `use std banner` is a ridiculously deceptive call. That call parses
and imports *all* of `std` into scope. Simply replacing it with `use
std/core *` is essentially what saves ~14-15ms. This *only* imports the
submodule with the `banner` and `pwd` commands.
* From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was
used as a prefix was so that there wouldn't be an issue if a user had a
`./std/mod.nu` in the current directory. This does **not** appear to be
an issue. After removing the prefix, I tested with both a relative
module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases
the *internal* `std` still took precedence.
* By removing the prefix, users can now `use std` (and variants) without
requiring that it already be parsed and in scope.
* In the next release, we'll stop autoloading the `dirs` (shells)
functionality. While this only costs an additional 1-1.5ms, I think it's
better moved to the `config.nu` where the user can optionally remove it.
The main reason is its use of aliases (which have also caused issues) -
The `n`, `p`, and `g` short-commands are valuable real-estate, and users
may want to map these to something else.
For this release, there's an `deprecated_dirs` module that is still
autoloaded. As with the top-level commands, use of these will give a
deprecation warning with instructions on how to handle going forward.
To help with this, moved the aliases to their own submodule inside the
`dirs` module.
* Also sneaks in a small change where the top-level `dirs` command is
now the replacement for `dirs show`
* Fixed a double-import of `assert` in `dirs.nu`
* The `show_banner` step is replaced with simply `banner` rather than
re-importing it.
* A `virtual_path` may now be referenced with either a forward-slash or
a backward-slash on Windows. This allows `use std/<submodule>` to work
on all platforms.
# Performance side-notes:
* Future parsing and/or IR improvements should improve performance even
further.
* While the existing load time penalty of `std-lib` was not noticeable
on many systems, Nushell runs on a wide-variety of hardware and OS
platforms. Slower platforms will naturally see a bigger jump in
performance here. For users starting multiple Nushell sessions
frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended
to keep total startup time (including user configuration) under ~250ms.
# Tests + Formatting
* All tests are green
* Updated tests:
- Removed the test that confirmed that `std` was loaded (since we
don't).
- Removed the `shells` test since it is not autoloaded. Main `dirs.nu`
functionality is tested through `stdlib-test`.
- Many tests assumed that the library was fully loaded, because it was
(even though we didn't intend for it to be). Fixed those tests.
- Tests now import only the necessary submodules (e.g., `use
std/assert`, rather than `use std assert`)
- Some tests *thought* they were loading `std/log`, but were doing so
improperly. This was masked by the now-fixed "load-everything-into-scope
bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being
inherited from the calling process, but would fail in the "clean" GitHub
CI environment. These tests have also been fixed.
* Added additional tests for the changes
# After Submitting
Will update the Standard Library doc page
This PR sets the current working directory to the location of the
Nushell executable at startup, using `std::env::set_current_dir()`. This
is desirable because after PR
https://github.com/nushell/nushell/pull/12922, we no longer change our
current working directory even after `cd` is executed, and some OS might
lock the directory where Nushell started.
The location of the Nushell executable is chosen because it cannot be
removed while Nushell is running anyways, so we don't have to worry
about OS locking it.
This PR has the side effect that it breaks buggy command even harder.
I'll keep this PR as a draft until these commands are fixed, but it
might be helpful to pull this PR if you're working on fixing one of
those bugs.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR makes it so that non-zero exit codes and termination by signal
are treated as a normal `ShellError`. Currently, these are silent
errors. That is, if an external command fails, then it's code block is
aborted, but the parent block can sometimes continue execution. E.g.,
see #8569 and this example:
```nushell
[1 2] | each { ^false }
```
Before this would give:
```
╭───┬──╮
│ 0 │ │
│ 1 │ │
╰───┴──╯
```
Now, this shows an error:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:2]
1 │ [1 2] | each { ^false }
· ┬
· ╰── source value
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #1:1:17]
1 │ [1 2] | each { ^false }
· ──┬──
· ╰── exited with code 1
╰────
```
This PR fixes#12874, fixes#5960, fixes#10856, and fixes#5347. This
PR also partially addresses #10633 and #10624 (only the last command of
a pipeline is currently checked). It looks like #8569 is already fixed,
but this PR will make sure it is definitely fixed (fixes#8569).
# User-Facing Changes
- Non-zero exit codes and termination by signal now cause an error to be
thrown.
- The error record value passed to a `catch` block may now have an
`exit_code` column containing the integer exit code if the error was due
to an external command.
- Adds new config values, `display_errors.exit_code` and
`display_errors.termination_signal`, which determine whether an error
message should be printed in the respective error cases. For
non-interactive sessions, these are set to `true`, and for interactive
sessions `display_errors.exit_code` is false (via the default config).
# Tests
Added a few tests.
# After Submitting
- Update docs and book.
- Future work:
- Error if other external commands besides the last in a pipeline exit
with a non-zero exit code. Then, deprecate `do -c` since this will be
the default behavior everywhere.
- Add a better mechanism for exit codes and deprecate
`$env.LAST_EXIT_CODE` (it's buggy).
# Description
`cargo` somewhat recently gained the capability to store `lints`
settings for the crate and workspace, that can override the defaults
from `rustc` and `clippy` lints. This means we can enforce some lints
without having to actively pass them to clippy via `cargo clippy -- -W
...`. So users just forking the repo have an easier time to follow
similar requirements like our CI.
## Limitation
An exception that remains is that those lints apply to both the primary
code base and the tests. Thus we can't include e.g. `unwrap_used`
without generating noise in the tests. Here the setup in the CI remains
the most helpful.
## Included lints
- Add `clippy::unchecked_duration_subtraction` (added by #12549)
# User-Facing Changes
Running `cargo clippy --workspace` should be closer to the CI. This has
benefits for editor configured runs of clippy and saves you from having
to use `toolkit` to be close to CI in more cases.
Fixesnushell/nushell#13689
# Description
Respect user-defined `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT`
Additionally I fixed `nu_with_std!()` macro (it was not working
correctly)
# User-Facing Changes
Users now may set `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT` in
`env.nu` and it will work even if `use std` is used after that.
# Tests + Formatting
Added a couple of tests for the new functionality.
# After Submitting
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
The previous behaviour of `into record` on lists was to create a new
record with each list index as the key. This was not very useful for
creating meaningful records, though, and most people would end up using
commands like `headers` or `transpose` to turn a list of keys and values
into a record.
This PR changes that instead to do what I think the most ergonomic thing
is, and instead:
- A list of records is merged into one record.
- A list of pairs (two element lists) is folded into a record with the
first element of each pair being the key, and the second being the
value.
The former is just generally more useful than having to use `reduce`
with `merge` for such a common operation, and the latter is useful
because it means that `$a | zip $b | into record` *just works* in the
way that seems most obvious.
Example:
```nushell
[[foo bar] [baz quux]] | into record # => {foo: bar, baz: quux}
[{foo: bar} {baz: quux}] | into record # => {foo: bar, baz: quux}
[foo baz] | zip [bar quux] | into record # => {foo: bar, baz: quux}
```
The support for range input has been removed, as it would no longer
reflect the treatment of an equivalent list.
The following is equivalent to the old behavior, in case that's desired:
```
0.. | zip [a b c] | into record # => {0: a, 1: b, 2: c}
```
# User-Facing Changes
- `into record` changed as described above (breaking)
- `into record` no longer supports range input (breaking)
# Tests + Formatting
Examples changed to match, everything works. Some usage in stdlib and
`nu_plugin_nu_example` had to be changed.
# After Submitting
- [ ] release notes (commands, breaking change)
# Very briefly
Fixes: #13317
- Ignore ansi coloring on logs if this setting is true.
- Add a reset after the default left prompt (before prompt character)
which fixes all-red text when `use_ansi_coloring` is false.
# Description
## Firstly,
argumentation about the changes to `crates/nu-std/std/log.nu`
Previous behavior colored the output of all log, even when the setting
`use_ansi_coloring` was false.
Current behavior honors the setting.
## Second,
While testing different scenarios, I found out that the default setting
on both (`0.95`, arch linux) and the source (`0.96`) all text was
displayed in red (the color used for the present-working-directory part
of the prompt) after setting `use_ansi_coloring` to `false` ([comment
with picture of the issue and reproduction
steps](https://github.com/nushell/nushell/issues/13317#issuecomment-2247439894)).
To which my response was adding a `(ansi reset)` at the end of the
directory part of the prompt in the default config
(`crates/nu-utils/src/sample_config/default_env.nu`) file. All later
parts follow the `use_ansi_coloring` setting and their assigned colors.
# User-Facing Changes
I would say the color, but don't know if that counts as "user-facing".
# Tests + Formatting
- Formatting was applied as advised.
- 1314 tests passed and 24 ignored, none failed.
- Clippy did not pass due to an error on the following files:
`crates/nu-protocol/src/engine/argument.rs:81:5` and
`crates/nu-protocol/src/engine/error_handler.rs:19:5`
throwing the error `you should consider adding a 'Default'
implementation for 'ErrorHandlerStack'`.
As those files are out of the scope of the current issue, they have
**not** been changed.
# Description
Add `README.md` files to each crate in our workspace (-plugins) and also
include it in the `lib.rs` documentation for <docs.rs> (if there is no
existing `lib.rs` crate documentation)
In all new README I added the defensive comment that the crates are not
considered stable for public consumption. If necessary we can adjust
this if we deem a crate useful for plugin authors.
# Description
Fixes: #13189
The issue is caused `error make` returns a `Value::Errror`, and when
nushell pass it to `table -e` in `std help`, it directly stop and render
the error message.
To solve it, I think it's safe to make these examples return None
directly, it doesn't change the reult of `help error make`.
# User-Facing Changes
## Before
```nushell
~> help "error make"
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[NU_STDLIB_VIRTUAL_DIR/std/help.nu:692:21]
691 │ ] {
692 │ let commands = (scope commands | sort-by name)
· ───────┬──────
· ╰── source value
693 │
╰────
Error: × my custom error message
```
## After
```nushell
Create an error.
Search terms: panic, crash, throw
Category: core
This command:
- does not create a scope.
- is a built-in command.
- is a subcommand.
- is not part of a plugin.
- is not a custom command.
- is not a keyword.
Usage:
> error make {flags} <error_struct>
Flags:
-u, --unspanned - remove the origin label from the error
-h, --help - Display the help message for this command
Signatures:
<nothing> | error make[ <record>] -> <any>
Parameters:
error_struct: <record> The error to create.
Examples:
Create a simple custom error
> error make {msg: "my custom error message"}
Create a more complex custom error
> error make {
msg: "my custom error message"
label: {
text: "my custom label text" # not mandatory unless $.label exists
# optional
span: {
# if $.label.span exists, both start and end must be present
start: 123
end: 456
}
}
help: "A help string, suggesting a fix to the user" # optional
}
Create a custom error for a custom command that shows the span of the argument
> def foo [x] {
error make {
msg: "this is fishy"
label: {
text: "fish right here"
span: (metadata $x).span
}
}
}
```
# Tests + Formatting
Added 1 test
Recommend holding until after #13125 is fully digested and *possibly*
until 0.96.
# Description
Fixes one of the issues described in #13125
The `do` signature included a `SyntaxShape:Any` as one of the possible
first-positional types. This is incorrect. `do` only takes a closure as
a positional. This had the result of:
1. Moving what should have been a parser error to evaluation-time
## Before
```nu
> do 1
Error: nu:🐚:cant_convert
× Can't convert to Closure.
╭─[entry #26:1:4]
1 │ do 1
· ┬
· ╰── can't convert int to Closure
╰────
```
## After
```nu
> do 1
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #5:1:4]
1 │ do 1
· ┬
· ╰── expected block, closure or record
╰────
```
2. Masking a bad test in `std assert`
This is a bit convoluted, but `std assert` tests included testing
`assert error` to make sure it:
* Asserts on bad code
* Doesn't assert on good code
The good-code test was broken, and was essentially bad-code (really
bad-code) that wasn't getting caught due to the bad signature.
Fixing this resulted in *parse time* failures on every call to
`test_asserts` (not something that particular test was designed to
handle.
This PR also fixes the test case to properly evaluate `std assert error`
against a good code path.
# User-Facing Changes
* Error-type returned (possible breaking change?)
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
The standard library's `path add` function has some surprising side
effects that I attempt to address in this PR:
1. Paths added, if they are symbolic links, should not be resolved to
their targets. Currently, resolution happens.
Imagine the following:
```nu
# Some time earlier, perhaps even not by the user, a symlink is created
mkdir real-dir
ln -s real-dir link-dir
# Then, step to now, with link-dir that we want in our PATHS variable
use std
path add link-dir
```
In the current implementation of `path add`, it is _not_ `link-dir` that
will be added, as has been stated in the command. It is instead
`real-dir`. This is surprising. Users have the agency to do this
resolution if they wish with `path expand` (sans a `--no-symlink` flag):
for example, `path add (link-dir | path expand)`
In particular, when I was trying to set up
[fnm](https://github.com/Schniz/fnm), a Node.js version manager, I was
bitten by this fact when `fnm` told me that an expected path had not
been added to the PATHS variable. It was looking for the non-resolved
link. The user in [this
comment](https://github.com/Schniz/fnm/issues/463#issuecomment-1710050737)
was likely affected by this too.
Shells, such as nushell, can handle path symlinks just fine. Binary
lookup is unaffected. Let resolution be opt-in.
Lastly, there is some convention already in place for **not** resolving
path symlinks in the [default $env.ENV_CONVERSIONS
table](57452337ff/crates/nu-utils/src/sample_config/default_env.nu (L65)).
2. All existing paths in the path variable should be left untouched.
Currently, they are `path expand`-ed (including symbolic link
resolution).
Path add should mean just that: prepend/append this path.
Instead, it currently means that, _plus mutate all other paths in the
variable_.
Again, users have the agency to do this with something like `$env.PATH =
$env.PATH | split row (char esep) | path expand`.
3. Minorly, I update documentation on running tests in
`crates/nu-std/CONTRIBUTING.md`. The offered command to run the standard
library test suite was no longer functional. Thanks to @weirdan in [this
Discord
conversation](https://discord.com/channels/601130461678272522/614593951969574961/1256029201119576147)
for the context.
# User-Facing Changes
(Written from the perspective of release notes)
- The standard library's `path add` function no longer resolves symlinks
in either the newly added paths, nor the other paths already in the
variable.
# Tests + Formatting
A test for the changes working correctly has been added to
`crates/nu-std/tests/test_std.nu` under the test named
`path_add_expand`.
You can quickly verify this new test and the existing `path add` test
with the following command:
```nu
cargo run -- -c 'use crates/nu-std/testing.nu; NU_LOG_LEVEL=INFO testing run-tests --path crates/nu-std --test path_add'
```
All commands suggested in the issue template have been run and complete
without error.
# After Submitting
I'll add a release note to [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#13143 by returning an empty list when there are no results found
by `std help --find/-f`
# User-Facing Changes
In addition, prints a message to stderr.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Some command help has example results with nested `table` data which is
displayed as the "non-expanded" form. E.g.:
```nu
╭───┬────────────────╮
│ 0 │ [list 2 items] │
│ 1 │ [list 2 items] │
╰───┴────────────────╯
```
For a good example, see `help zip`.
While we could simply remove the offending Example `result`'s from the
command itself, `std help` is capable of expanding the table properly.
It already formats the output of each example result using `table`, so
simply making it a `table -e` fixes the output.
While I wish we had a way of expanding the tables in the builtin `help`,
that seems to be the same type of problem as in formatting the `cal`
output (see #11954).
I personally think it's better to add this feature to `std help` than to
remove the offending example results, but as long as `std help` is
optional, only a small percentage of users are going to see the
"expected" results.
# User-Facing Changes
Excerpt from `std help zip` before change:
```nu
Zip two lists
> [1 2] | zip [3 4]
╭───┬────────────────╮
│ 0 │ [list 2 items] │
│ 1 │ [list 2 items] │
╰───┴────────────────╯
```
After:
```nu
Zip two lists
> [1 2] | zip [3 4]
╭───┬───────────╮
│ 0 │ ╭───┬───╮ │
│ │ │ 0 │ 1 │ │
│ │ │ 1 │ 3 │ │
│ │ ╰───┴───╯ │
│ 1 │ ╭───┬───╮ │
│ │ │ 0 │ 2 │ │
│ │ │ 1 │ 4 │ │
│ │ ╰───┴───╯ │
╰───┴───────────╯
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`help banner` had several issues:
* It used a Markdown link to an Asciinema recording, but Markdown links
aren't rendered as Markdown links by the help system (and can't be,
since (most?) terminals don't support that)
* Minor grammatical issues
* The Asciinema recording is out of date anyway. It still uses `use
stdn.nu banner` which isn't valid syntax any longer.
Since everyone at this point knows exactly what `banner` does 😉, I chose
to simply remove the link to the recording. Also tweaked the text
(initial caps and removed comma).
# User-Facing Changes
Help only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
i was looking at the website documentation of `std assert` and i noticed
one thing
- the `--error-label` argument of `assert` and `assert not` was just a
`record` -> now it's that complete type `record<text: string, span:
record<start: int, end: int>>`
# Description
Fixes: #12941
~~The issue is cause by some columns(is_builtin, is_plugin, is_custom,
is_keyword) are removed in #10023~~
Edit: I'm wrong
# Tests + Formatting
Added one test for `std help`
As discussed in https://github.com/nushell/nushell/pull/12749, we no
longer need to call `std::env::set_current_dir()` to sync `$env.PWD`
with the actual working directory. This PR removes the call from
`EngineState::merge_env()`.
