# Description
Follow up to #14341. Changes the fields of `Hooks` to `Vec` or `Hashmap`
to match the new config defaults.
# User-Facing Changes
Mostly the same as #14341. `pre_prompt` and `pre_execution` must now be
a list, and `env_change` must be a record.
As I'm working on PWD-per-drive feature. Once the plugin test of env
failed. I checked the log, found sometime Windows can give drive letter
as lowercase, so the test case should be rewrite to check first letter
caseinsensitive equal, and following part normal equal.
```
assert_eq! failed at tests/plugins/env.rs:43:5
left: r"e:\Study\Nushell"
right: r"E:\Study\Nushell"
```
---------
Co-authored-by: Zhenping Zhao <pegasus.cadence@gmail.com>
# Description
As a bit of a follow-on to #13802 and #14249, this (pretty much a
"one-line" change) really does *always* populate the `$env.config`
record with the `nu-protocol::config` defaults during startup. This
means that an `$env.config` record is value (with defaults) even during:
* `nu -n` to suppress loading of config files
* `nu -c <commandstring>`
* `nu <script>`
# User-Facing Changes
There should be no case in which there isn't a valid `$env.config`.
* Before:
```nushell
nu -c "$env.config"
# -> Error
```
* After:
```nushell
nu -c "$env.config"
# -> Default $env.config record
```
Startup time impact is negligible (17.072µs from `perf!` on my system) -
Seems well worth it.
# Tests + Formatting
Added tests for several `-n -c` cases.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Config chapter update still in progress.
# Description
The `.nu-env` file feature was removed some time ago (probably in the
engine-q upgrade?). The tests, however, still remained as dead-code, so
this is just some basic clean-up.
If this feature was ever implemented again, the tests would need to be
rewritten anyway due to the changes in the way config is handled.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
# After Submitting
N/A
# Description
The "append" operator currently serves as both the append operator and
the concatenation operator. This dual role creates ambiguity when
operating on nested lists.
```nu
[1 2] ++ 3 # appends a value to a list [1 2 3]
[1 2] ++ [3 4] # concatenates two lists [1 2 3 4]
[[1 2] [3 4]] ++ [5 6]
# does this give [[1 2] [3 4] [5 6]]
# or [[1 2] [3 4] 5 6]
```
Another problem is that `++=` can change the type of a variable:
```nu
mut str = 'hello '
$str ++= ['world']
($str | describe) == list<string>
```
Note that appending is only relevant for lists, but concatenation is
relevant for lists, strings, and binary values. Additionally, appending
can be expressed in terms of concatenation (see example below). So, this
PR changes the `++` operator to only perform concatenation.
# User-Facing Changes
Using the `++` operator with a list and a non-list value will now be a
compile time or runtime error.
```nu
mut list = []
$list ++= 1 # error
```
Instead, concatenate a list with one element:
```nu
$list ++= [1]
```
Or use `append`:
```nu
$list = $list | append 1
```
# After Submitting
Update book and docs.
---------
Co-authored-by: Douglas <32344964+NotTheDr01ds@users.noreply.github.com>
# User-Facing Changes
- `expected <type>` errors are now propagated from
`Closure | Block | Expression` instead of falling back to
"expected one of..." for the block:
Before:
```nushell
def foo [bar: bool] {}
if true {} else { foo 1 }
────┬────
╰── expected one of a list of accepted shapes: [Block, Expression]
```
After:
```nushell
if true {} else { foo 1 }
┬
╰── expected bool
```
This commit upgrades calamine in order to benefit from recent
developments, e.g. ignore annotations in column headers (see
https://github.com/tafia/calamine/pull/467 for reference).
# Release-Notes Short Description
* Nushell now always loads its internal `default_env.nu` before the user
`env.nu` is loaded, then loads the internal `default_config.nu` before
the user's `config.nu` is loaded. This allows for a simpler
user-configuration experience. The Configuration Chapter of the Book
will be updated soon with the new behavior.
# Description
Implements the main ideas in #13671 and a few more:
* Users can now specify only the environment and config options they
want to override in *their* `env.nu` and `config.nu`and yet still have
access to all of the defaults:
* `default_env.nu` (internally defined) will be loaded whenever (and
before) the user's `env.nu` is loaded.
* `default_config.nu` (internally defined) will be loaded whenever (and
before) the user's `config.nu` is loaded.
* No more 900+ line config out-of-the-box.
* Faster startup (again): ~40-45% improvement in launch time with a
default configuration.
* New keys that are added to the defaults in the future will
automatically be available to all users after updating Nushell. No need
to regenerate config to get the new defaults.
* It is now possible to have different internal defaults (which will be
used with `-c` and scripts) vs. REPL defaults. This would have solved
many of the user complaints about the [`display_errors`
implementation](https://www.nushell.sh/blog/2024-09-17-nushell_0_98_0.html#non-zero-exit-codes-are-now-errors-toc).
* A basic "scaffold" `config.nu` and `env.nu` are created on first
launch (if the config directory isn't present).
* Improved "out-of-the-box" experience (OOBE) - No longer asks to create
the files; the minimal scaffolding will be automatically created. If
deleted, they will not be regenerated. This provides a better
"out-of-the-box" experience for the user as they no longer have to make
this decision (without much info on the pros or cons) when first
launching.
* <s>(New: 2024-11-07) Runs the env_conversions process after the
`default_env.nu` is loaded so that users can treat `Path`/`PATH` as
lists in their own config.</s>
* (New: 2024-11-08) Given the changes in #13802, `default_config.nu`
will be a minimal file to minimize load-times. This shaves another (on
my system) ~3ms off the base launch time.
* Related: Keybindings, menus, and hooks that are already internal
defaults are no longer duplicated in `$env.config`. The documentation
will be updated to cover these scenarios.
* (New: 2024-11-08) Move existing "full" `default_config.nu` to
`sample_config.nu` for short-term "documentation" purposes.
* (New: 2024-11-18) Move the `dark-theme` and `light-theme` to Standard
Library and demonstrate their use - Also improves startup times, but
we're reaching the limit of optimization.
* (New: 2024-11-18) Extensively documented/commented `sample_env.nu` and
`sample_config.nu`. These can be displayed in-shell using (for example)
`config nu --sample | nu-highlight | less -R`. Note: Much of this will
eventually be moved to or (some) duplicated in the Doc. But for now,
this some nice in-shell doc that replaces the older
"commented/documented default".
* (New: 2024-11-20) Runs the `ENV_CONVERSIONS` process (1) after the
`default_env.nu` (allows `PATH` to be used as a list in user's `env.nu`)
and (2) before `default_config.nu` is loaded (allows user's
`ENV_CONVERSIONS` from their `env.nu` to be used in their `config.nu`).
* <s>(New: 2024-11-20) The default `ENV_CONVERSIONS` is now an empty
record. The internal Rust code handles `PATH` (and variants) conversions
regardless of the `ENV_CONVERSIONS` variable. This shaves a *very* small
amount of time off the startup.</s> Reset - Looks like there might be a
bug in `nu-enginer::env::ensure_path()` on Windows that would need to be
fixed in order for this to work.
# User-Facing Changes
By default, you shouldn't see much, if any, change when running this
with your existing configuration.
To see the greatest benefit from these changes, you'll probably want to
start with a "fresh" config. This can be easily tested using something
like:
```nushell
let temp_home = (mktemp -d)
$env.XDG_CONFIG_HOME = $temp_home
$env.XDG_DATA_HOME = $temp_home
./target/release/nu
```
You should see a message where the (mostly empty) `env.nu` and
`config.nu` are created on first start. Defaults should be the same (or
similar to) those before the PR. Please let me know if you notice any
differences.
---
Users should now specify configuration in terms of overrides of each
setting. For instance, rather than modifying `history` settings in the
monolithic `config.nu`, the following is recommended in an updated
`config.nu`:
```nu
$env.config.history = {
file_format: sqlite,
sync_on_enter: true
isolation: true
max_size: 1_000_000
}
```
or even just:
```nu
$env.config.history.file_format = sqlite
$env.config.history.isolation: true
$env.config.history.max_size = 1_000_000
```
Note: It seems many users are already appending a `source my_config.nu`
(or similar pattern) to the end of the existing `config.nu` to make
updates easier. In this case, they will likely want to remove all of the
previous defaults and just move their `my_config.nu` to `config.nu`.
Note: It should be unlikely that there are any breaking changes here,
but there's a slim chance that some code, somewhere, *expects* an
absence of certain config values. Otherwise, all config values are
available before and after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Configuration Chapter (and related) of the doc is currently WIP and will
be finished in time for 0.101 release.
# Release Notes Excerpt
* Hooks now default to an empty value of the proper type (e.g., `[]` or
`{}`) when not otherwise specified
# Description
```nushell
# Start with no config
nu -n
# Populate with defaults
$env.config = {}
$env.config.hooks
```
* Before: All hooks other than `display_output` were set to `null`.
Attempting to append a hook using `++=` would fail unless it had already
been assigned.
* After:
* `pre_prompt`, `pre_execution`, and `command_not_found` are set to
empty lists. This allows the user to simply append new hooks using
`++=`.
* `env_change` is set to an empty record. This allows the user to add
new hooks using `merge`, although a "helper" command would still be
useful (TODO: stdlib).
Also fixed a typo in an error message.
# User-Facing Changes
There shouldn't be any breaking changes since (before) there were no
guarantees of the hook's value/type. Previously, users would have to
check for `null` and `default` to an empty list before appending. Any
user-strategies for dealing with the problem should continue to work
after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Note that, for reasons I cannot ascertain, this PR appears to have
*fixed* the `command_not_found_error_recognizes_non_executable_file`
test that was previously broken by #12953. That PR essentially rewrote
the test to match the new behavior, but it no longer tested what it was
intended to test.
Now, the test is working again as designed (and as it works in the
REPL).
# After Submitting
This will be covered in the Configuration update for #14249. This PR
will simplify several examples in the doc.
# Description
Removes the `NU_DISABLE_IR` option and some code related to evaluating
blocks with the AST
evaluator.
Does not entirely remove the AST evaluator yet. We still have some
dependencies on expression
evaluation in a few minor places which will take a little bit of effort
to fix.
Also changes `debug profile` to always include instructions, because the
output is a little
confusing otherwise, and removes the different options for
instructions/exprs.
# User-Facing Changes
- `NU_DISABLE_IR` no longer has any effect, and is removed. There is no
way to use the AST
evaluator.
- `debug profile` no longer has `--exprs`, `--instructions` options.
- `debug profile` lists `pc` and `instruction` columns by default now.
# Tests + Formatting
Eval tests fixed to only use IR.
# After Submitting
- [ ] release notes
- [ ] finish removing AST evaluator, come up with solutions for the
expression evaluation.
# Description
Fixes#14294 - Turned out to be a whole lot easier than I expected, but
please double-check me on this, since it's an area I haven't been in
before.
# User-Facing Changes
Allow date to be added to a duration type.
# Tests + Formatting
Tests added:
* Duration + Date is allowed
* Duration - Date is not allowed
Fixes#13776
# User-Facing Changes
Arguments to aliased externals no longer include nested import paths:
```diff
module foo { export alias bar = ^echo }
use foo
foo bar baz
-bar baz
+baz
```
# User-Facing Changes
Table literal arguments to list parameters are now correctly parsed:
```diff
def a [l: list<any>] { $l | to nuon }; a [[a]; [2]]
-[[a]]
+[[a]; [2]]
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes: #13362
This PR fixes the `Display` impl for `CellPath`, as laid out in #13362
and #14090:
```nushell
> $.0."0"
$.0."0"
> $."foo.bar".baz
$."foo.bar".baz
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Cell-paths are now printed using the same `$.` notation that is used to
create them, and ambiguous column names are properly quoted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #14202
After looking into the issue, I think #13910 it's not good to cut the
span if it's in external argument.
This pr is somehow revert the change, and fix
https://github.com/nushell/nushell/issues/13431 in another way.
It introduce a new state named `State::BackTickQuote`, so if an external
arg include backtick quote, it enters the state, so backtick quote won't
be the body of a string.
# User-Facing Changes
### Before
```nushell
> ^echo `(echo aa)`
aa
> ^echo `"aa"` # maybe it's not right to remove the inner quote.
aa
```
### After
```nushell
> ^echo `(echo aa)`
(echo aa)
> ^echo `"aa"` # inner quote is keeped if there are backtick quote outside.
"aa"
```
# Tests + Formatting
Added 3 tests.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
This PR is supposed to fix#13582, #11522, as well as related goto
definition/reference issues (wrong position if non ascii characters
ahead).
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
<img width="411" alt="image"
src="https://github.com/user-attachments/assets/9a81953c-81b2-490d-a842-14ccaefd6972">
Changes:
1. span/completion should use byte offset instead of character index
2. lsp Postions related ops in Ropey remain to use character index
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Should be none, tested in neovim with config:
```lua
require("lspconfig").nushell.setup({
cmd = {
"nu",
"-I",
vim.fn.getcwd(),
"--no-config-file",
"--lsp",
},
filetypes = { "nu" },
})
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
tests::complete_command_with_utf_line parameters fixed to align with
true lsp requests (in character index, not byte).
As for the issue_11522.nu, manually tested:
<img width="520" alt="image"
src="https://github.com/user-attachments/assets/45496ba8-5a2d-4998-9190-d7bde31ee72c">
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixes#13757, fixes#9562
# User-Facing Changes
- `unclosed |` is returned for malformed closure parameters:
```
{ |a }
```
- Parameter list closing pipes are highlighted as part of the closure
# Description
This PR changes the range contains logic to take the step into account.
```nushell
# before
2 in 1..3.. # true
# now
2 in 1..3.. # false
```
---
I encountered another issue while adding tests. Due to floating point
precision, `2.1 in 1..1.1..3` will return `false`. The floating point
error is even bigger than `f64::EPSILON` (`0.09999999999999876` vs
`2.220446049250313e-16`). This issue disappears with bigger numbers.
I tried a different algorithm (checking if the estimated number of steps
is close enough to any integer) but the results are still pretty bad:
```rust
let n_steps = (value - self.start) / self.step; // 14.999999999999988
(n_steps - n_steps.round()).abs() < f64::EPSILON // returns false
```
Maybe it can be shipped like this, the REPL already has floating point
errors (`1.1 - 1` returns `0.10000000000000009`). Or maybe there's a way
to fix this that I didn't think of. I'm open to ideas! But in any case
performing this kind of checks on a range of floats seems more niche
than doing it on a range of ints.
# User-Facing Changes
Code that depended on this behavior to check if a number is between
`start` and `end` will potentially return a different value.
# Tests + Formatting
# After Submitting
# Description
Fixes: #13967
The key changes lays in `nu-protocol/src/module.rs`, when resolving
import pattern, nushell only needs to bring `$module` with a record
value if it defines any constants.
# User-Facing Changes
```nushell
module spam {}
use spam
```
Will no longer create a `$spam` variable with an empty record.
# Tests + Formatting
Adjusted some tests and added some tests.
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
# Description
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1292279795035668583)
**This is a breaking change, due to the removal of `is_running`.**
Some users find the `plugin list` command confusing, because it doesn't
show anything different after running `plugin add` or `plugin rm`. This
modifies the `plugin list` command to also look at the plugin registry
file to give some idea of how the plugins in engine state differ from
those in the plugin registry file.
The following values of `status` are now produced instead of
`is_running`:
- `added`: The plugin is present in the plugin registry file, but not in
the engine.
- `loaded`: The plugin is present both in the plugin registry file and
in the engine, but is not running.
- `running`: The plugin is currently running, and the `pid` column
should contain its process ID.
- `modified`: The plugin state present in the plugin registry file is
different from the state in the engine.
- `removed`: The plugin is still loaded in the engine, but is not
present in the plugin registry file.
- `invalid`: The data in the plugin registry file couldn't be
deserialized, and the plugin most likely needs to be added again.
Example (`commands` omitted):
```
╭──────┬─────────────────────┬────────────┬───────────┬──────────┬─────────────────────────────────────────────────────┬─────────╮
│ # │ name │ version │ status │ pid │ filename │ shell │
├──────┼─────────────────────┼────────────┼───────────┼──────────┼─────────────────────────────────────────────────────┼─────────┤
│ 0 │ custom_values │ 0.1.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_custom_values │ │
│ 1 │ dbus │ 0.11.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_dbus │ │
│ 2 │ example │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_example │ │
│ 3 │ explore_ir │ 0.3.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_explore_ir │ │
│ 4 │ formats │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_formats │ │
│ 5 │ gstat │ 0.98.1 │ running │ 236662 │ /home/devyn/.cargo/bin/nu_plugin_gstat │ │
│ 6 │ inc │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_inc │ │
│ 7 │ polars │ 0.98.1 │ added │ │ /home/devyn/.cargo/bin/nu_plugin_polars │ │
│ 8 │ query │ 0.98.1 │ removed │ │ /home/devyn/.cargo/bin/nu_plugin_query │ │
│ 9 │ stress_internals │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_stress_internals │ │
╰──────┴─────────────────────┴────────────┴───────────┴──────────┴─────────────────────────────────────────────────────┴─────────╯
```
# User-Facing Changes
To `plugin list`:
* **Breaking:** The `is_running` column is removed and replaced with
`status`. Use `status == running` to filter equivalently.
* The `--plugin-config` from other plugin management commands is now
supported.
* Added an `--engine` flag which behaves more or less like before, and
doesn't load the plugin registry file at all.
* Added a `--registry` flag which only checks the plugin registry file.
All plugins appear as `added` since there is no state to compare with.
Because the default is to check both, the `plugin list` command might be
a little bit slower. If you don't need to check the plugin registry
file, the `--engine` flag does not load the plugin registry file at all,
so it should be just as fast as before.
# Tests + Formatting
Added tests for `added` and `removed` statuses. `modified` and `invalid`
are a bit more tricky so I didn't try.
# After Submitting
- [ ] update documentation that references the `plugin list` command
- [ ] release notes
# Description
Fixes: #13967
The key changes lays in `nu-protocol/src/module.rs`, when resolving
import pattern, nushell only needs to bring `$module` with a record
value if it defines any constants.
# User-Facing Changes
```nushell
module spam {}
use spam
```
Will no longer create a `$spam` variable with an empty record.
# Tests + Formatting
Adjusted some tests and added some tests.
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
# Description
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1292279795035668583)
**This is a breaking change, due to the removal of `is_running`.**
Some users find the `plugin list` command confusing, because it doesn't
show anything different after running `plugin add` or `plugin rm`. This
modifies the `plugin list` command to also look at the plugin registry
file to give some idea of how the plugins in engine state differ from
those in the plugin registry file.
The following values of `status` are now produced instead of
`is_running`:
- `added`: The plugin is present in the plugin registry file, but not in
the engine.
- `loaded`: The plugin is present both in the plugin registry file and
in the engine, but is not running.
- `running`: The plugin is currently running, and the `pid` column
should contain its process ID.
- `modified`: The plugin state present in the plugin registry file is
different from the state in the engine.
- `removed`: The plugin is still loaded in the engine, but is not
present in the plugin registry file.
- `invalid`: The data in the plugin registry file couldn't be
deserialized, and the plugin most likely needs to be added again.
Example (`commands` omitted):
```
╭──────┬─────────────────────┬────────────┬───────────┬──────────┬─────────────────────────────────────────────────────┬─────────╮
│ # │ name │ version │ status │ pid │ filename │ shell │
├──────┼─────────────────────┼────────────┼───────────┼──────────┼─────────────────────────────────────────────────────┼─────────┤
│ 0 │ custom_values │ 0.1.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_custom_values │ │
│ 1 │ dbus │ 0.11.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_dbus │ │
│ 2 │ example │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_example │ │
│ 3 │ explore_ir │ 0.3.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_explore_ir │ │
│ 4 │ formats │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_formats │ │
│ 5 │ gstat │ 0.98.1 │ running │ 236662 │ /home/devyn/.cargo/bin/nu_plugin_gstat │ │
│ 6 │ inc │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_inc │ │
│ 7 │ polars │ 0.98.1 │ added │ │ /home/devyn/.cargo/bin/nu_plugin_polars │ │
│ 8 │ query │ 0.98.1 │ removed │ │ /home/devyn/.cargo/bin/nu_plugin_query │ │
│ 9 │ stress_internals │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_stress_internals │ │
╰──────┴─────────────────────┴────────────┴───────────┴──────────┴─────────────────────────────────────────────────────┴─────────╯
```
# User-Facing Changes
To `plugin list`:
* **Breaking:** The `is_running` column is removed and replaced with
`status`. Use `status == running` to filter equivalently.
* The `--plugin-config` from other plugin management commands is now
supported.
* Added an `--engine` flag which behaves more or less like before, and
doesn't load the plugin registry file at all.
* Added a `--registry` flag which only checks the plugin registry file.
All plugins appear as `added` since there is no state to compare with.
Because the default is to check both, the `plugin list` command might be
a little bit slower. If you don't need to check the plugin registry
file, the `--engine` flag does not load the plugin registry file at all,
so it should be just as fast as before.
# Tests + Formatting
Added tests for `added` and `removed` statuses. `modified` and `invalid`
are a bit more tricky so I didn't try.
# After Submitting
- [ ] update documentation that references the `plugin list` command
- [ ] release notes
The idea comes from @amtoine, I think it would be good to keey
`display_error.exit_code` same value, if user is using default config or
using no config file at all.
# Description
This PR standardizes updates to the config through a new
`UpdateFromValue` trait. For now, this trait is private in case we need
to make changes to it.
Note that this PR adds some additional `ShellError` cases to create
standard error messages for config errors. A follow-up PR will move
usages of the old error cases to these new ones. This PR also uses
`Type::custom` in lots of places (e.g., for string enums). Not sure if
this is something we want to encourage.
# User-Facing Changes
Should be none.
# Description
Currently there is a bit of chaos regarding construction of history file
paths. Various pieces of code across a number of crates reimplement the
same/similar logic:
- There is `get_history_path`, but it requires a directory parameter (it
really just joins it with a file name).
- Some places use a const for the directory parameter, others use a
string literal - in all cases the value seems to be `"nushell"`.
- Some places assume the `"nushell"` value, other plumb it down from
close to the top of the call stack.
- Some places use a constant for history file names while others assume
it.
This PR tries to make it so that the history/config path format is
defined in a single places and so dependencies on it are easier to
follow:
- It removes `get_history_path` and adds a `file_path` method to
`HistoryConfig` instead (an extra motivation being, this is a convenient
place that can be used from all creates that need a history file path)
- Adds a `nu_config_dir` function that returns the nushell configuration
directory.
- Updates existing code to rely on the above, effectively removing
duplicate uses of `"nushell"` and `NUSHELL_FOLDER` and assumptions about
file names associated with different history formats
# User-Facing Changes
None
# Description
Fixes a small side-issue in #10977 - If a command flag didn't have a
comment/description, it would still show an unnecessary separator at the
end of the line.
This fixes that, plus uses the `: ` (colon) to separate the flag from
the description. This aligns with the way that named parameters are
handled.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Updated summary for commit
[612e0e2](612e0e2160)
- While folks are welcome to read through the entire comments, the core
information is summarized here.
# Description
This PR drastically improves startup times of Nushell by only parsing a
single submodule of the Standard Library that provides the `banner` and
`pwd` commands. All other Standard Library commands and submodules are
parsed when imported by the user. This cuts startup times by more than
60%.
At the moment, we have stopped adding to `std-lib` because every
addition adds a small amount to the Nushell startup time.
With this change, we should once again be able to allow new
functionality to be added to the Standard Library without it impacting
`nu` startup times.
# User-Facing Changes
* Nushell now starts about 60% faster
* Breaking change: The `dirs` (Shells) aliases will return a warning
message that it will not be auto-loaded in the following release, along
with instructions on how to restore it (and disable the message)
* The `use std <submodule> *` syntax is available for convenience, but
should be avoided in scripts as it parses the entire `std` module and
all other submodules and places it in scope. The correct syntax to
*just* load a submodule is `use std/<submodule> *` (asterisk optional).
The slash is important. This will be documented.
* `use std *` can be used for convenience to load all of the library but
still incurs the full loading-time.
* `std/dirs`: Semi-breaking change. The `dirs` command replaces the
`show` command. This is more in line with the directory-stack
functionality found in other shells. Existing users will not be impacted
by this as the alias (`shells`) remains the same.
* Breaking-change: Technically a breaking change, but probably only
impacts maintainers of `std`. The virtual path for the standard library
has changed. It could previously be imported using its virtual path (and
technically, this would have been the correct way to do it):
```nu
use NU_STDLIB_VIRTUAL_DIR/std
```
The path is now simply `std/`:
```nu
use std
```
All submodules have moved accordingly.
# Timings
Comparisons below were made:
* In a temporary, clean config directory using `$env.XDG_CONFIG_HOME =
(mktemp -d)`.
* `nu` was run with a release build
* `nu` was run one time to generate the default `config.nu` (etc.) files
- Otherwise timings would include the user-prompt
* The shell was exited and then restarted several times to get timing
samples
(Note: Old timings based on 0.97 rather than 0.98, but in the range of
being accurate)
| Scenario | `$nu.startup-time` |
| --- | --- |
| 0.97.2
([aaaab8e](aaaab8e070))
Without this PR | 23ms - 24ms |
| This PR with deprecated commands | 9ms - <11ms |
| This PR after deprecated commands are removed in following release |
8ms - <10ms |
| Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms |
| Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms
|
| Final PR (remove deprecated), using `--no-config-file --no-std-lib` |
1ms - 1.5ms |
*These last two timings point to the opportunity for further
optimization (see comment in thread below (will link once I write it).*
# Implementation details for future maintenance
* `use std banner` is a ridiculously deceptive call. That call parses
and imports *all* of `std` into scope. Simply replacing it with `use
std/core *` is essentially what saves ~14-15ms. This *only* imports the
submodule with the `banner` and `pwd` commands.
* From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was
used as a prefix was so that there wouldn't be an issue if a user had a
`./std/mod.nu` in the current directory. This does **not** appear to be
an issue. After removing the prefix, I tested with both a relative
module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases
the *internal* `std` still took precedence.
* By removing the prefix, users can now `use std` (and variants) without
requiring that it already be parsed and in scope.
* In the next release, we'll stop autoloading the `dirs` (shells)
functionality. While this only costs an additional 1-1.5ms, I think it's
better moved to the `config.nu` where the user can optionally remove it.
The main reason is its use of aliases (which have also caused issues) -
The `n`, `p`, and `g` short-commands are valuable real-estate, and users
may want to map these to something else.
For this release, there's an `deprecated_dirs` module that is still
autoloaded. As with the top-level commands, use of these will give a
deprecation warning with instructions on how to handle going forward.
To help with this, moved the aliases to their own submodule inside the
`dirs` module.
* Also sneaks in a small change where the top-level `dirs` command is
now the replacement for `dirs show`
* Fixed a double-import of `assert` in `dirs.nu`
* The `show_banner` step is replaced with simply `banner` rather than
re-importing it.
* A `virtual_path` may now be referenced with either a forward-slash or
a backward-slash on Windows. This allows `use std/<submodule>` to work
on all platforms.
# Performance side-notes:
* Future parsing and/or IR improvements should improve performance even
further.
* While the existing load time penalty of `std-lib` was not noticeable
on many systems, Nushell runs on a wide-variety of hardware and OS
platforms. Slower platforms will naturally see a bigger jump in
performance here. For users starting multiple Nushell sessions
frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended
to keep total startup time (including user configuration) under ~250ms.
# Tests + Formatting
* All tests are green
* Updated tests:
- Removed the test that confirmed that `std` was loaded (since we
don't).
- Removed the `shells` test since it is not autoloaded. Main `dirs.nu`
functionality is tested through `stdlib-test`.
- Many tests assumed that the library was fully loaded, because it was
(even though we didn't intend for it to be). Fixed those tests.
- Tests now import only the necessary submodules (e.g., `use
std/assert`, rather than `use std assert`)
- Some tests *thought* they were loading `std/log`, but were doing so
improperly. This was masked by the now-fixed "load-everything-into-scope
bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being
inherited from the calling process, but would fail in the "clean" GitHub
CI environment. These tests have also been fixed.
* Added additional tests for the changes
# After Submitting
Will update the Standard Library doc page
# Description
Old code was comparing remaining positional arguments with total number
of arguments, where it should've compared remaining positional with
with remaining arguments of any kind. This means that if a function was
given too few arguments, `calculate_end_span` would believe that it
actually had too many arguments, since after parsing the first few
arguments, the number of remaining arguments needed were fewer than the
*total* number of arguments, of which we had used several.
Fixes#9072
Fixes: https://github.com/nushell/nushell/issues/13930
Fixes: https://github.com/nushell/nushell/issues/12069
Fixes: https://github.com/nushell/nushell/issues/8385
Extracted from #10381
## Bonus
It also improves the error handling on missing positional arguments
before keywords (no longer crashing since #9851). Instead of just giving
the keyword to the parser for the missing positional, we give an
explicit error about a missing positional argument. I would like better
descriptions than "missing var_name" though, but I'm not sure if that's
available without
Old error
```
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:1]
1 │ let = if foo
· ┬
· ╰── expected valid variable name
╰────
```
New error
```
Error: nu::parser::missing_positional
× Missing required positional argument.
╭─[entry #18:1:1]
1 │ let = foo
· ┬
· ╰── missing var_name
╰────
help: Usage: let <var_name> = <initial_value>
```
# User-Facing Changes
The program `alias = = =` is no longer accepted by the parser
This PR sets the current working directory to the location of the
Nushell executable at startup, using `std::env::set_current_dir()`. This
is desirable because after PR
https://github.com/nushell/nushell/pull/12922, we no longer change our
current working directory even after `cd` is executed, and some OS might
lock the directory where Nushell started.
The location of the Nushell executable is chosen because it cannot be
removed while Nushell is running anyways, so we don't have to worry
about OS locking it.
This PR has the side effect that it breaks buggy command even harder.
I'll keep this PR as a draft until these commands are fixed, but it
might be helpful to pull this PR if you're working on fixing one of
those bugs.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Fixes a bug with `set_last_error()` introduced by @IanManske not being
called during the jump to an error handler in IR eval. Without this,
`$env.LAST_EXIT_CODE` wasn't getting set in the `catch` block for an
external.
# Tests + Formatting
Added a `tests/eval` test to cover this in both IR and non-IR eval
# Description
This is my first PR, and I'm looking for feedback to help me improve!
This PR fixes#13380 by expanding the path prior to parsing it.
Also I've removed some unused code in
[completion_common.rs](84e92bb02c/crates/nu-cli/src/completions/completion_common.rs
)
# User-Facing Changes
Auto-completion for "cd .../" now works by expanding to "cd ../../".
# Tests + Formatting
Formatted and added 2 tests for triple dots in the middle of a path and
at the end.
Also added a test for the expand_ndots() function.
# Description
This PR makes it so that non-zero exit codes and termination by signal
are treated as a normal `ShellError`. Currently, these are silent
errors. That is, if an external command fails, then it's code block is
aborted, but the parent block can sometimes continue execution. E.g.,
see #8569 and this example:
```nushell
[1 2] | each { ^false }
```
Before this would give:
```
╭───┬──╮
│ 0 │ │
│ 1 │ │
╰───┴──╯
```
Now, this shows an error:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:2]
1 │ [1 2] | each { ^false }
· ┬
· ╰── source value
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #1:1:17]
1 │ [1 2] | each { ^false }
· ──┬──
· ╰── exited with code 1
╰────
```
This PR fixes#12874, fixes#5960, fixes#10856, and fixes#5347. This
PR also partially addresses #10633 and #10624 (only the last command of
a pipeline is currently checked). It looks like #8569 is already fixed,
but this PR will make sure it is definitely fixed (fixes#8569).
# User-Facing Changes
- Non-zero exit codes and termination by signal now cause an error to be
thrown.
- The error record value passed to a `catch` block may now have an
`exit_code` column containing the integer exit code if the error was due
to an external command.
- Adds new config values, `display_errors.exit_code` and
`display_errors.termination_signal`, which determine whether an error
message should be printed in the respective error cases. For
non-interactive sessions, these are set to `true`, and for interactive
sessions `display_errors.exit_code` is false (via the default config).
# Tests
Added a few tests.
# After Submitting
- Update docs and book.
- Future work:
- Error if other external commands besides the last in a pipeline exit
with a non-zero exit code. Then, deprecate `do -c` since this will be
the default behavior everywhere.
- Add a better mechanism for exit codes and deprecate
`$env.LAST_EXIT_CODE` (it's buggy).
Fixesnushell/nushell#13689
# Description
Respect user-defined `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT`
Additionally I fixed `nu_with_std!()` macro (it was not working
correctly)
# User-Facing Changes
Users now may set `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT` in
`env.nu` and it will work even if `use std` is used after that.
# Tests + Formatting
Added a couple of tests for the new functionality.
# After Submitting
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently the parser and the documentation generation use the signature
of the command, which means that it doesn't pick up on the changed name
of the `main` block, and therefore shows the name of the command as
"main" and doesn't find the subcommands. This PR changes the
aforementioned places to use the block signature to fix these issues.
This closes#13397. Incidentally it also causes input/output types to be
shown in the help, which is kinda pointless for scripts since they don't
operate on structured data but maybe not worth the effort to remove.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
```
# example.nu
export def main [] { help main }
export def 'main sub' [] { print 'sub' }
```
Before:
After:
# Tests
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests are still missing for the subcommands and the input/output types
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
`bits rol` and `bits ror` were both undefined for the full byte rotates
and panicked when exceeding the byte rotation range.
`bits ror` further more produced nonsensical results by pulling bits
from the following byte instead of the preceding byte.
Those bugs are now fixed
# User-Facing Changes
Sound Nushell `IncorrectValue` error when exceeding the available bits
# Tests + Formatting
Added the necessary tests
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
Fixes#11267
Shifting by a `shift >= num_bits` is undefined in the underlying
operation. Previously we also had an overflow on negative shifts for the
operators `bit-shl` and `bit-shr`
Furthermore I found a severe bug in the implementation of shifting of
`binary` data with the commands `bits shl` and `bits shr`, this
categorically produced incorrect results with shifts that were not
`shift % 4 == 0`. `bits shr` also was able to produce outputs with
different size to the input if the shift was exceeding the length of the
input data by more than a byte.
# User-Facing Changes
It is now an error trying to shift by more than the available bits with:
- `bit-shl` operator
- `bit-shr` operator
- command `bits shl`
- command `bits shr`
# Tests + Formatting
Added testing for all relevant cases
# Description
Fixes Issue #13477
This adds a check to see if a user is trying to invoke a
(non-executable) file as a command and returns a helpful error if so.
EDIT: this will not work on Windows, and is arguably not relevant there,
because of the different semantics of executables. I think the
equivalent on Windows would be if a user tries to invoke `./foo`, we
should look for `foo.exe` or `foo.bat` in the directory and recommend
that if it exists.
# User-Facing Changes
When a user invokes an unrecognized command that is the path to an
existing file, the error used to say:
`{name} is neither a Nushell built-in or a known external command`
This PR proposes to change the message to:
`{name} refers to a file that is not executable. Did you forget to to
set execute permissions?`
# Tests + Formatting
Ran cargo fmt, clippy and test on the workspace.
EDIT: added test asserting the new behavior
# Description
As per our Wednesday meeting, this adds a parse error when something
that would be parsed as an external call is present at the top level,
unless the head of the external call begins with a caret (to make it
explicit).
I tried to make the error quite descriptive about what should be done.
# User-Facing Changes
These now cause a parse error:
```nushell
$foo = bar
$foo = `bar`
```
These would have been interpreted as strings before this version, but
now they'd be interpreted as external calls. This behavior is consistent
with `let`/`mut` (which is unaffected by this change).
Here is an example of the error:
```
Error: × External command calls must be explicit in assignments
╭─[entry #3:1:8]
1 │ $foo = bar
· ─┬─
· ╰── add a caret (^) before the command name if you intended to run and capture its output
╰────
help: the parsing of assignments was changed in 0.97.0, and this would have previously been treated as a string.
Alternatively, quote the string with single or double quotes to avoid it being interpreted as a command name. This
restriction may be removed in a future release.
```
# Tests + Formatting
Tests added to cover the change. Note made about it being temporary.
# Description
Part 4 of replacing std::path types with nu_path types added in
https://github.com/nushell/nushell/pull/13115. This PR migrates various
tests throughout the code base.
# Description
Part 3 of replacing `std::path` types with `nu_path` types added in
#13115. This PR targets the paths listed in `$nu`. That is, the home,
config, data, and cache directories.
# Description
This makes assignment operations and `const` behave the same way `let`
and `mut` do, absorbing the rest of the pipeline.
Changes the lexer to be able to recognize assignment operators as a
separate token, and then makes the lite parser continue to push spans
into the same command regardless of any redirections or pipes if an
assignment operator is encountered. Because the pipeline is no longer
split up by the lite parser at this point, it's trivial to just parse
the right hand side as if it were a subexpression not contained within
parentheses.
# User-Facing Changes
Big breaking change. These are all now possible:
```nushell
const path = 'a' | path join 'b'
mut x = 2
$x = random int
$x = [1 2 3] | math sum
$env.FOO = random chars
```
In the past, these would have led to (an attempt at) bare word string
parsing. So while `$env.FOO = bar` would have previously set the
environment variable `FOO` to the string `"bar"`, it now tries to run
the command named `bar`, hence the major breaking change.
However, this is desirable because it is very consistent - if you see
the `=`, you can just assume it absorbs everything else to the right of
it.
# Tests + Formatting
Added tests for the new behaviour. Adjusted some existing tests that
depended on the right hand side of assignments being parsed as
barewords.
# After Submitting
- [ ] release notes (breaking change!)
# Description
[Discovered](https://discord.com/channels/601130461678272522/614593951969574961/1266503282554179604)
by `@warp` on Discord.
The IR compiler was not properly setting redirect modes for
subexpressions because `FullCellPath` was always being compiled with
capture-out redirection. This is the correct behavior if there is a tail
to the `FullCellPath`, as we need the value in order to try to extract
anything from it (although this is unlikely to work) - however, the
parser also generates `FullCellPath`s with an empty tail quite often,
including for bare subexpressions.
Because of this, the following did not behave as expected:
```nushell
(docker run -it --rm alpine)
```
Capturing the output meant that `docker` didn't have direct access to
the terminal as a TTY.
As this is a minor bug fix, it should be okay to include in the 0.96.1
patch release.
# User-Facing Changes
- Fixes the bug as described when running with IR evaluation enabled.
# Tests + Formatting
I added a test for this, though we're not currently running all tests
with IR on the CI, but it should ensure this behaviour is consistent.
The equivalent minimum repro I could find was:
```nushell
(nu --testbin cococo); null
```
as this should cause the `cococo` message to appear on stdout, and if
Nushell is capturing the output, it would be discarded instead.
