We have three different `rustix` minor versions. For two of them with
their previous patch versions a security advisory has been released:
https://github.com/advisories/GHSA-c827-hfw6-qwvm
Bump the patch versions, to resolve the potential vulnerability.
At the moment we haven't assessed the potential impact on nushell,
whether we are exposed to the underlying issue.
The `color-backtrace` crate does not seem to either handle the terminal
modes well or operate in a way that the unwinding has not yet succeeded
to reach the backup disablement of the terminal raw mode in
`reedline::Reedline`'s `Drop` implementation.
This reverts commit d838871063.
Fixes#11029
Provides support for reading Polars structs. This allows opening of
supported files (jsonl, parquet, etc) that contain rows with structured
data.
The following attached json lines
file([receipts.jsonl.gz](https://github.com/nushell/nushell/files/13311476/receipts.jsonl.gz))
contains a customer column with structured data. This json lines file
can now be loaded via `dfr open` and will render as follows:
<img width="525" alt="Screenshot 2023-11-09 at 10 09 18"
src="https://github.com/nushell/nushell/assets/56345/4b26ccdc-c230-43ae-a8d5-8af88a1b72de">
This also addresses some cleanup of date handling and utilizing
timezones where provided.
This pull request only addresses reading data from polars structs. I
will address converting nushell data to polars structs in a future
request as this change is large enough as it is.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Add an extension trait `IgnoreCaseExt` to nu_utils which adds some case
insensitivity helpers, and use them throughout nu to improve the
handling of case insensitivity. Proper case folding is done via unicase,
which is already a dependency via mime_guess from nu-command.
In actuality a lot of code still does `to_lowercase`, because unicase
only provides immediate comparison and doesn't expose a `to_folded_case`
yet. And since we do a lot of `contains`/`starts_with`/`ends_with`, it's
not sufficient to just have `eq_ignore_case`. But if we get access in
the future, this makes us ready to use it with a change in one place.
Plus, it's clearer what the purpose is at the call site to call
`to_folded_case` instead of `to_lowercase` if it's exclusively for the
purpose of case insensitive comparison, even if it just does
`to_lowercase` still.
# User-Facing Changes
- Some commands that were supposed to be case insensitive remained only
insensitive to ASCII case (a-z), and now are case insensitive w.r.t.
non-ASCII characters as well.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Just throwing up this PR because color-backtrace seemed to produce more
useful backtraces. Just curious what others think.
Did this:
1. RUST_BACKTRACE=full cargo r
2. ❯ def test01 [] {
let sorted = [storm]
$sorted | range 1.. | zip ($sorted | range ..(-2))
}
3. test01
I like how it shows the code snippet.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the trash dependency from 3.1.0 to 3.1.2 for better
support on FreeBSD.
closes#10961
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Implements `whoami` using the `whoami` command from uutils as backend.
This is a draft because it depends on
https://github.com/uutils/coreutils/pull/5310 and a new release of
uutils needs to be made (and the paths in `Cargo.toml` should be
updated). At this point, this is more of a proof of concept 😄
Additionally, this implements a (simple and naive) conversion from the
uutils `UResult` to the nushell `ShellError`, which should help with the
integration of other utils, too. I can split that off into a separate PR
if desired.
I put this command in the "platform" category. If it should go somewhere
else, let me know!
The tests will currently fail, because I've used a local path to uutils.
Once the PR on the uutils side is merged, I'll update it to a git path
so that it can be tested and runs on more machines than just mine.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New `whoami` command. This might break some users who expect the system
`whoami` command. However, the result of this new command should be very
close, just with a nicer help message, at least for Linux users. The
default `whoami` on Windows is quite different from this implementation:
https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/whoami
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Reverts nushell/nushell#10812
This goes back to a version of `regex` and its dependencies that is
shared with a lot of our other dependencies. Before this we did not
duplicate big dependencies of `regex` that affect binary size and
compile time.
As there is no known bug or security problem we suffer from, we can wait
on receiving the performance improvements to `regex` with the rest of
our `regex` dependents.
This commit uses the new `CwdAwareHinter` in reedline. Closes#8883.
# Description
Currently, the history based hints show results from all directories,
while most commands make sense only in the directory they were run in.
This PR makes hints take the current directory into account.
# User-Facing Changes
Described above.
I haven't yet added a config option for this, because I personally
believe folks won't be against it once they try it out. We can add it if
people complain, there's some time before the next release.
Fish has this without a config option too.
# Tests + Formatting
If tests are needed, I'll need help as I'm not well versed with the
codebase.
(squashed version of #10557, clean commit history and review thread)
Fixes#10571, also potentially: #10364, #10211, #9558, #9310,
# Description
Changes processing of arguments to filesystem commands that are source
paths or globs.
Applies to `cp, cp-old, mv, rm, du` but not `ls` (because it uses a
different globbing interface) or `glob` (because it uses a different
globbing library).
The core of the change is to lookup the argument first as a file and
only glob if it is not. That way,
a path containing glob metacharacters can be referenced without glob
quoting, though it will have to be single quoted to avoid nushell
parsing.
Before: A file path that looks like a glob is not matched by the glob
specified as a (source) argument and takes some thinking about to
access. You might say the glob pattern shadows a file with the same
spelling.
```
> ls a*
╭───┬────────┬──────┬──────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼────────┼──────┼──────┼────────────────┤
│ 0 │ a[bc]d │ file │ 0 B │ 34 seconds ago │
│ 1 │ abd │ file │ 0 B │ now │
│ 2 │ acd │ file │ 0 B │ now │
╰───┴────────┴──────┴──────┴────────────────╯
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
> ## Note -- a[bc]d *not* copied, and seemingly hard to access.
> cp --verbose 'a\[bc\]d' dest
Error: × No matches found
╭─[entry #33:1:1]
1 │ cp --verbose 'a\[bc\]d' dest
· ─────┬────
· ╰── no matches found
╰────
> #.. but is accessible with enough glob quoting.
> cp --verbose 'a[[]bc[]]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
```
Before_2: if file has glob metachars but isn't a valid pattern, user
gets a confusing error:
```
> touch 'a[b'
> cp 'a[b' dest
Error: × Pattern syntax error near position 30: invalid range pattern
╭─[entry #13:1:1]
1 │ cp 'a[b' dest
· ──┬──
· ╰── invalid pattern
╰────
```
After: Args to cp, mv, etc. are tried first as literal files, and only
as globs if not found to be files.
```
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
> cp --verbose '[a][bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
```
After_2: file with glob metachars but invalid pattern just works.
(though Windows does not allow file name to contain `*`.).
```
> cp --verbose 'a[b' dest
copied /home/bobhy/src/rust/work/r4/a[b to /home/bobhy/src/rust/work/r4/dest/a[b
```
So, with this fix, a file shadows a glob pattern with the same spelling.
If you have such a file and really want to use the glob pattern, you
will have to glob quote some of the characters in the pattern. I think
that's less confusing to the user: if ls shows a file with a weird name,
s/he'll still be able to copy, rename or delete it.
# User-Facing Changes
Could break some existing scripts. If user happened to have a file with
a globbish name but was using a glob pattern with the same spelling, the
new version will process the file and not expand the glob.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Re-fixes #3674, if that is seen as desirable to do.
# Description
This PR changes the implementation of the `--features=extra` string
casing commands from Inflector to `heck`, as in PR #4081. This PR landed
a long time ago, but somewhere along the way (i can't find it) the
implementation ended up being switched back to Inflector.
# User-Facing Changes
Inflector and `heck` implement casing differently, so all of the
commands have different behavior around edge cases (consecutive
capitals, interspersed numbers and letters, etc)
### Before
```nu
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str camel-case
╭───┬───────────╮
│ 0 │ userID │
│ 1 │ abcdefGHI │
│ 2 │ foo123Bar │
╰───┴───────────╯
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str snake-case
╭───┬─────────────╮
│ 0 │ user_id │
│ 1 │ ab_cdef_ghi │
│ 2 │ foo_12_3bar │
╰───┴─────────────╯
```
### After
```nu
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str camel-case
╭───┬───────────╮
│ 0 │ userId │
│ 1 │ abCdefGhi │
│ 2 │ foo123bar │
╰───┴───────────╯
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str snake-case
╭───┬─────────────╮
│ 0 │ user_id │
│ 1 │ ab_cdef_ghi │
│ 2 │ foo123bar │
╰───┴─────────────╯
```
# Tests + Formatting
The existing string casing tests pass... because none of them relied on
any of these edge cases
# Description
Open question:
Undocumented behavior for the new argument `ambiguous` to the
`as_datetime`
methods. I cheated by passing a default (assuming empty string).
This appears like an API primarily serving the python impl:
https://pola-rs.github.io/polars/py-polars/html/reference/expressions/api/polars.Expr.str.to_datetime.html#polars-expr-str-to-datetime
# User-Facing Changes
Only dependent on breaking changes to the behavior of polars.
# Tests + Formatting
No observed changes to tests
Manually checked `dfr as-datetime`, doesn't seem to panic.
# Description
This PR renames nushell's `cp` command to `cp-old` to make room for
`ucp` to be renamed to `cp`, making the coreutils version of `cp` the
default for nushell. After some period of time, we should remove
`cp-old` entirely.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I haven't tested cause can't reproduce, but the issue very likely was
related to a emojies. (I mean I probably could but ....)
Could you try it @fdncred?
fix#10560
# Description
This removes the old style "cd with abbreviations" that would attempt to
guess what directory you wanted to `cd` to. This would sometimes have
false positives, so we left it off by default in the config.
In the current main, we have much-improved path completions
(https://github.com/nushell/nushell/pull/10543) so you can now do `cd
a/b<tab>` and get a much better experience (because you can see the
directory you're about to cd to). This removes the need for the previous
abbreviation system.
# User-Facing Changes
This does remove the old abbreviation system. It will likely mean that
old config files that have settings for abbreviations will now get
errors.
update: here's an example of the error you'll see:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close#5683
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR allows tab completion for nested directories while only
specifying a part of the directory names. To illustrate this, if I type
`tar/de/inc` and hit tab, it autocompletes to
`./target/debug/incremental`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Nested paths can be tab completed by typing lesser characters.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests cases are added.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This merges @horasal 's changes from #10246 and #10269Closes#10205Closes#8714
Fixes the bug that editor paths with spaces are unusable
Closes#10210Closes#10269
# User-Facing Changes
You can now either pass a string with the name of the executable or a
list with the executable and any flags to
`$env.config.buffer_editor`/`$env.EDITOR`/`$env.VISUAL`
Both the external buffer editor of reedline (by default bound to
`Ctrl-o`) and the commands `config nu` and `config env` will respect
those variables in the following order:
1. `$env.config.buffer_editor`
2. `$env.EDITOR`
3. `$env.VISUAL`
Example:
```
$env.EDITOR = "nvim" # The system-wide EDITOR is neovim
$env.config.buffer_editor = ["vim" "-p2"] # Force vim to open two tabs (not particularly useful)
$env.config.buffer_editor = null # Unset `buffer_editor` -> Uses `$env.EDITOR` ergo nvim
```
# Tests + Formatting
None
---------
Co-authored-by: Horasal <1991933+horasal@users.noreply.github.com>
# Description
This new command `into value` is a command that tries to infer the type
of data you have in a table. It converts each cell to a string and then
runs a set of regular expressions on that string. This was mostly
cobbled together after looking at how polars does similar things. The
regular expressions were taken straight form polars and tweaked.
### Before
```nushell
❯ [[col1 col2 col3 col4 col5 col6]; ["1" "two" "3.4" "true" "2023-08-10 14:07:17.922050800 -05:00" "2023-09-19"]] |
update col1 {|r| $r.col1 | into int } |
update col3 {|r| $r.col3 | into float } |
update col4 {|r| $r.col4 | into bool } |
update col5 {|r| $r.col5 | into datetime } |
update col6 {|r| $r.col6 | into datetime }
╭#┬col1┬col2┬col3┬col4┬───col5────┬───col6────╮
│0│ 1│two │3.40│true│a month ago│8 hours ago│
╰─┴────┴────┴────┴────┴───────────┴───────────╯
```
or
```nushell
❯ [[col1 col2 col3 col4 col5 col6]; ["1" "two" "3.4" "true" "2023-08-10 14:07:17.922050800 -05:00" "2023-09-19"]] |
into int col1 |
into float col3 |
into bool col4 |
into datetime col5 col6
╭#┬col1┬col2┬col3┬col4┬───col5────┬───col6────╮
│0│ 1│two │3.40│true│a month ago│8 hours ago│
╰─┴────┴────┴────┴────┴───────────┴───────────╯
```
### After
```nushell
❯ [[col1 col2 col3 col4 col5 col6]; ["1" "two" "3.4" "true" "2023-08-10 14:07:17.922050800 -05:00" "2023-09-19"]] | into value
╭#┬col1┬col2┬col3┬col4┬───col5────┬───col6────╮
│0│ 1│two │3.40│true│a month ago│8 hours ago│
╰─┴────┴────┴────┴────┴───────────┴───────────╯
```
It's definitely not perfect. There are ways it will fail because on
regular expressions not working on all formats. My hope is that people
will pick this up and add more regular expressions and if there are
problems with the existing ones, change them. This is meant as a
"starter command" with easy entry for newcomers that are looking to chip
in and help out.
Also, some tests probably need to be added to ensure what we have now
doesn't break with updates.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [toml](https://github.com/toml-rs/toml) from 0.7.6 to 0.8.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="310f6ee9c5"><code>310f6ee</code></a>
chore: Release</li>
<li><a
href="90da8bc425"><code>90da8bc</code></a>
docs: Update changelog</li>
<li><a
href="f3e120f1a0"><code>f3e120f</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/608">#608</a> from
epage/enum</li>
<li><a
href="58a7101f68"><code>58a7101</code></a>
fix(serde): Support struct variants as table of a table</li>
<li><a
href="88a4dba312"><code>88a4dba</code></a>
fix(serde): Support tuple variants as table of an array</li>
<li><a
href="cf06b83424"><code>cf06b83</code></a>
test(serde): Verify both Table and Value serializers</li>
<li><a
href="4ffa44ec16"><code>4ffa44e</code></a>
test(serde): Make parameter order more consistent</li>
<li><a
href="2b7c34c900"><code>2b7c34c</code></a>
test(serde): Focus on string serialization first</li>
<li><a
href="e2a6a1cece"><code>e2a6a1c</code></a>
test(serde): Verify existing variant behavior</li>
<li><a
href="3f3e8329bb"><code>3f3e832</code></a>
chore: Release</li>
<li>Additional commits viewable in <a
href="https://github.com/toml-rs/toml/compare/toml-v0.7.6...toml-v0.8.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [terminal_size](https://github.com/eminence/terminal-size) from
0.2.6 to 0.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/eminence/terminal-size/releases">terminal_size's
releases</a>.</em></p>
<blockquote>
<h2>v0.3.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Check all streams (out/err/in) to find one that has a tty and size
by <a href="https://github.com/eminence"><code>@eminence</code></a> in
<a
href="https://redirect.github.com/eminence/terminal-size/pull/58">eminence/terminal-size#58</a>
<ul>
<li>Note that this is a subtle change in behavior, since the
<code>terminal_size()</code> function will now return success in cases
more cases than before</li>
</ul>
</li>
<li>Update to rustix 0.38 by <a
href="https://github.com/chenx97"><code>@chenx97</code></a> in <a
href="https://redirect.github.com/eminence/terminal-size/pull/57">eminence/terminal-size#57</a>
<ul>
<li>This change bumps the MSRV from 1.48.0 to 1.63.0</li>
</ul>
</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/eminence/terminal-size/compare/v0.2.6...v0.3.0">https://github.com/eminence/terminal-size/compare/v0.2.6...v0.3.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="2983b7bf18"><code>2983b7b</code></a>
Release v0.3.0</li>
<li><a
href="27a4459b22"><code>27a4459</code></a>
Merge pull request <a
href="https://redirect.github.com/eminence/terminal-size/issues/57">#57</a>
from chenx97/rustix-0.38</li>
<li><a
href="c24c1c34e5"><code>c24c1c3</code></a>
Bump MSRV to 1.63.0</li>
<li><a
href="78e13c77d7"><code>78e13c7</code></a>
Update to rustix 0.38</li>
<li><a
href="18c58b1ed5"><code>18c58b1</code></a>
Merge pull request <a
href="https://redirect.github.com/eminence/terminal-size/issues/58">#58</a>
from eminence/check_all_streams</li>
<li><a
href="08f0e73926"><code>08f0e73</code></a>
Check all streams (out/err/in) to find one that has a tty and size</li>
<li>See full diff in <a
href="https://github.com/eminence/terminal-size/compare/v0.2.6...v0.3.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [mockito](https://github.com/lipanski/mockito) from 1.1.0 to
1.2.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lipanski/mockito/releases">mockito's
releases</a>.</em></p>
<blockquote>
<h2>1.2.0</h2>
<ul>
<li><strong>[Breaking]</strong> The minimum supported Rust version was
bumped to 1.68.0</li>
<li>The server pool was limited to 20 servers for <code>mac_os</code>
targets to prevent hitting the file descriptor limit</li>
</ul>
<p>Thanks to <a
href="https://github.com/kornelski"><code>@kornelski</code></a></p>
<h2>1.1.1</h2>
<ul>
<li><a
href="https://redirect.github.com/lipanski/mockito/pull/176">Ensure</a>
<code>with_chunked_body</code> supports streaming responses (as opposed
to writing the entire buffer in one go)</li>
</ul>
<p>Thanks to <a
href="https://github.com/kornelski"><code>@kornelski</code></a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7514e38524"><code>7514e38</code></a>
Bump to 1.2.0</li>
<li><a
href="be00de417e"><code>be00de4</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/177">#177</a>
from kornelski/pool</li>
<li><a
href="6b4073e911"><code>6b4073e</code></a>
MSRV</li>
<li><a
href="9faa825110"><code>9faa825</code></a>
Test exhausting server pool</li>
<li><a
href="3099e94471"><code>3099e94</code></a>
Simplify server pool</li>
<li><a
href="99735e7c41"><code>99735e7</code></a>
Bump to 1.1.1</li>
<li><a
href="3b63970619"><code>3b63970</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/176">#176</a>
from kornelski/stream</li>
<li><a
href="339bffc983"><code>339bffc</code></a>
Support streaming body</li>
<li><a
href="8b7575cd38"><code>8b7575c</code></a>
Simplify server pool test</li>
<li>See full diff in <a
href="https://github.com/lipanski/mockito/compare/1.1.0...1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR cleans up some warnings on the latest chrono dependency.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
```nu
$env.config.color_config.leading_trailing_space_bg = { bg: 'white' }; [[a b, 'c ']; [' 1 ' ' 2' '3 '] [' 4 ' "hello \n world " [' 1 ' 2 [1 ' 2 ' 3]]]] | table --expand
```
ref: #2794close: #10317
note: test are not actually make scenes cause `nu!` strips colors.
(Ideally it would need a flag to not do so)
note: It does does does ... slower down quite a bit rendering... (
PS: Maybe it's better being a flag to `table` rather then a
configuration option?
PS: I am not sure why the logic was removed in a first place
Upgrade calamine to 0.22
Reduces one potential dependency duplication
Supersedes #10305
Includes fixes for clippy lints as API changed to return owned data.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Hi. Basically, this is a continuation of the work that @fdncred started.
Given some nice discussions on #9463 , and [merged uutils
PR](https://github.com/uutils/coreutils/pull/5152) from @tertsdiepraam
we have decided to give the `cp` command the `crawl` stage as it was
named.
> [!NOTE]
Given that the `uutils` crate has not made the release for the merged
PR, just make sure you checkout latest and put it in the required place
to make this PR work.
The aim of this PR is for is to see how to move forward using `uutils`
crate. In order to getting this started, I have made the current
`nushell cp tests` pass along with some extra ones I copied over from
the `uutils` repo.
With all of that being said, things that would be nice to decide, and
keep working on:
Crawl:
- Handling of certain `named` flags, with their long and short
forms(e.g. --update, --reflink, --preserve, etc), and using default
values. Maybe `-u` can already have a `default_missing_value`.
- Should we maybe just support one single option `switch` flags (see
`--backup` in code) as a contrast to the other named args.
- Complete test coverage from `uutils`. They had > 100 tests, and I
could only port like 12 as they are a bit time consuming given they
cannot be straight up copy pasted. Maybe we do not need all >100, but
maybe the more relevant to what we want.
- Refactor this code
Walk:
- Non fatal errors on `copy` from `utils`. Currently it just sends it to
stdout but errors have no span
- Better integration
An added possibility is the addition of `SyntaxShape::OneOf()` for
`Named` arguments which was briefly mentioned in the discord server, but
that is still to be decided. This could greatly improve some of the
integration. This would enable something like `cp --preserve [all
timestamp]` or `cp --preserve all` to both work.
I did not want to keep holding on this, and wait till I was happy with
the code because I think its nice if everyone can start up and suggest
refactors, but the main important part now was getting it out the door,
as if I take my sweet time this will take way longer 😛
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [X] cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- [X] cargo test --workspace` to check that all tests pass
- [X] cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This updates most crates to 0.27 `crossterm`.
To do so we need the most recent `ratatui`
`reedline` can now update as well.
See https://github.com/nushell/reedline/pull/625
Sadly this introduces some crate duplication again as there are some
other dependency updates.
Furthermore we have another crate depending on 0.26.1 crossterm
(`comfy-table` that some how gets pulled in by polars)
# User-Facing Changes
2 additional mouse events detected by `input listen`
# Tests + Formatting
None
This addresses the warnings generated from using DateTime::from_utc.
DateTime::from_utc was deprecated as of chrono 0.4.27
Co-authored-by: Jack Wright <jack.wright@disqo.com>
Polars and SQLParser upgrade.
I have exposed features that have been added to polars as command args
where appropriate.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
I moved hook to *nu_cmd_base* instead of *nu_cli* because it will enable
other developers to continue to use hook even if they decide to write
their on cli or NOT depend on nu-cli
Then they will still have the hook functionality because they can
include nu-cmd-base
# Description
This PR tries to remove ~atty~ is-terminal from the entire code base,
since ~[atty is
unmaintained](https://rustsec.org/advisories/RUSTSEC-2021-0145) and~
[`is_terminal` has been
stabilized](https://blog.rust-lang.org/2023/06/01/Rust-1.70.0.html#isterminal)
in rust 1.70.0.
cc @fdncred
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
`chrono` crate enables `oldtime` feature by default, which has a
vulnerability (https://rustsec.org/advisories/RUSTSEC-2020-0071). This
PR tries to remove `time` v0.1.45 completely from nu and add an audit CI
to check for security vulnerabilities.
✋ Wait for the following PRs:
- [x] https://github.com/nushell/reedline/pull/599
- [x] https://github.com/bspeice/dtparse/pull/44
- [x] https://github.com/Byron/trash-rs/pull/75
- [x] https://gitlab.com/imp/chrono-humanize-rs/-/merge_requests/15
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
Allow `decode` command to guess the encoding of input if no encoding
name is given.
# User-Facing Changes
* `decode` now has an optional parameter instead of required one. User
can just run `decode` to let the command automatically detect encoding
and convert it to utf-8.
<img width="575" alt="Example"
src="https://github.com/nushell/nushell/assets/1991933/03a0ba11-910e-4db9-89aa-79cfec06893f">
* Based on the detect result, user may have to give a encoding name
<img width="572" alt="Error Sample1"
src="https://github.com/nushell/nushell/assets/1991933/f21fda85-1f04-4cb3-9feb-cb9fb7dcee07">
or get informed that the input is not supported by `decode`
<img width="568" alt="Error Sample2"
src="https://github.com/nushell/nushell/assets/1991933/dd3cc4c0-f119-493e-8609-d07594fc055a">
# Tests + Formatting
* `cargo fmt --all -- --check` : OK
* `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err`: OK
* `cargo test --workspace` : OK
* `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"`: OK
# After Submitting
[Command document](https://www.nushell.sh/commands/docs/decode.html) is
auto-generated and requires no action.
---------
Co-authored-by: Horasal <horsal@horsal.dev>
# Description
This PR bumps nushell from release version 0.84.0 to dev version 0.84.1.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes the semver issues with `strip-ansi-escapes` and updates it
to 0.2.0 as well as updating to the latest reedline which just landed an
identical patch.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates `strip-ansi-escapes` to support their new API. This also
updates nushell to the latest reedline after the same fix
https://github.com/nushell/reedline/pull/617closes#9957
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
This PR should close#8036, #9028 (in the negative) and #9118.
Fix for #9118 is a bit pedantic. As reported, the issue is:
```
> 2023-05-07T04:08:45+12:00 - 2019-05-10T09:59:12+12:00
3yr 12month 2day 18hr 9min 33sec
```
with this PR, you now get:
```
> 2023-05-07T04:08:45+12:00 - 2019-05-10T09:59:12+12:00
208wk 1day 18hr 9min 33sec
```
Which is strictly correct, but could still fairly be called "weird date
arithmetic".
# Description
* [x] Abide by constraint that Value::Duration remains a number of
nanoseconds with no additional fields.
* [x] `to_string()` only displays weeks .. nanoseconds. Duration doesn't
have base date to compute months or years from.
* [x] `duration | into record` likewise only has fields for weeks ..
nanoseconds.
* [x] `string | into duration` now accepts compound form of duration
to_string() (e.g '2day 3hr`, not just '2day')
* [x] `duration | into string` now works (and produces the same
representation as to_string(), which may be compound).
# User-Facing Changes
## duration -> string -> duration
Now you can "round trip" an arbitrary duration value: convert it to a
string that may include multiple time units (a "compound" value), then
convert that string back into a duration. This required changes to
`string | into duration` and the addition of `duration | into string'.
```
> 2day + 3hr
2day 3hr # the "to_string()" representation (in this case, a compound value)
> 2day + 3hr | into string
2day 3hr # string value
> 2day + 3hr | into string | into duration
2day 3hr # round-trip duration -> string -> duration
```
Note that `to nuon` and `from nuon` already round-tripped durations, but
use a different string representation.
## potentially breaking changes
* string rendering of a duration no longer has 'yr' or 'month' phrases.
* record from `duration | into record` no longer has 'year' or 'month'
fields.
The excess duration is all lumped into the `week` field, which is the
largest time unit you can
convert to without knowing the datetime from which the duration was
calculated.
Scripts that depended on month or year time units on output will need to
be changed.
### Examples
```
> 365day
52wk 1day
## Used to be:
## 1yr
> 365day | into record
╭──────┬────╮
│ week │ 52 │
│ day │ 1 │
│ sign │ + │
╰──────┴────╯
## used to be:
##╭──────┬───╮
##│ year │ 1 │
##│ sign │ + │
##╰──────┴───╯
> (365day + 4wk + 5day + 6hr + 7min + 8sec + 9ms + 10us + 11ns)
56wk 6day 6hr 7min 8sec 9ms 10µs 11ns
## used to be:
## 1yr 1month 3day 6hr 7min 8sec 9ms 10µs 11ns
## which looks reasonable, but was actually only correct in 75% of the years and 25% of the months in the last 4 years.
> (365day + 4wk + 5day + 6hr + 7min + 8sec + 9ms + 10us + 11ns) | into record
╭─────────────┬────╮
│ week │ 56 │
│ day │ 6 │
│ hour │ 6 │
│ minute │ 7 │
│ second │ 8 │
│ millisecond │ 9 │
│ microsecond │ 10 │
│ nanosecond │ 11 │
│ sign │ + │
╰─────────────┴────╯
```
Strictly speaking, these changes could break an existing user script.
Losing years and months as time units is arguably a regression in
behavior.
Also, the corrected duration calculation could break an existing script
that was calibrated using the old algorithm.
# Tests + Formatting
```
> toolkit check pr
```
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Bob Hyman <bobhy@localhost.localdomain>
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I am moving the following str case commands to nu-cmd-extra (as
discussed in the core team meeting the other day)
* camel-case
* kebab-case
* pascal-case
* screaming-snake-case
* snake-case
* title-case
fix#9796
Sorry that you've had the issues.
I've actually encountered them yesterday too (seems like they have
appeared after some refactoring in the middle) but was not able to fix
that rapid.
Created a bunch of tests.
cc: @fdncred
Note:
This option will be certainly slower then a default ones. (could be
fixed but ... maybe later).
Maybe it shall be cited somewhere.
PS: Haven't tested on a wrapped/expanded tables.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Reverts nushell/nushell#9796
This is just draft since we're seeing some issues with the latest fixes
to table drawing that just landed with #9796. We're hoping to get these
fixed, but if we're not able to fix them before the next release, we'll
need to revert (hence this PR, just in case we need it).
A patch to play with.
Need to make a few tests after all.
The question is what shall be done with `table.mode = none`, as it has
no borders.
```nu
$env.config.table.move_header = true
```
cc: @fdncred
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
This PR updates nushell to use the latest reedline. I swear that was the
only change I made. The other reordering stuff is by my vscode extension
I guess.
closes https://github.com/nushell/nushell/issues/9123
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This deduplicates `ahash` as it was previously an outdated
build-dependency of `unicode-linebreak`
Should provide a small benefit to initial from scratch compile.
# User-Facing Changes
None
# Description
This bumps nushell to the dev version of 0.83.1 and updates the default
config files with the proper version.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Bump 0.83
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I added a new capability to `bracoxide` which is for `brace expansion`
(it's almost like bash brace expressions).
Anyway, this change adds this capability:
`A{,B,C} | str expand`, returns:
```md
- A
- AB
- AC
```
`A{B,,C} | str expand`, returns:
```md
- AB
- A
- AC
```
`A{B,C,} | str expand`, returns:
```md
- AB
- AC
- A
```
Updated examples, according to the new feature.
# Description
We only used this procmacro crate in one place to generate two trivial
getters. Straightforward to replace. Should reduce test-compilation
requirements a bit.
# User-Facing Changes
None
# Description
This PR tries to remove `is-root` crate.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Until we bump our minimal Rust version to `1.70.0` we can't use
`std::io::IsTerminal`. The crate `is-terminal` (depending on `rustix` or
`windows-sys`) can provide the same.
Get's rid of the dependency on the outdated `atty` crate.
We already transitively depend on it (e.g. through `miette`)
As soon as we reach the new Rust version we can supersede this with
@nibon7's #9550
Co-authored-by: nibon7 <nibon7@163.com>
# Description
Update `lru` to `0.11`: `cargo build` will now not need `hashbrown 0.13`
Update `dashmap`: upgrades `hashbrown` for dev-dependency
-1 dependency in the `cargo install` path
- See nushell/reedline#600
- updates to `strum 0.25` which uses the newer more widespread `syn 2.0`
- this deduplicates `syn` for a default build.
- Unlocks #9639
# Description
Apart from `polars` (only used with `--features dataframe`) and the
dev-dependencies our deps use `indexmap 2.0`.
Thus the default or `extra` `cargo build` will reduce deps.
This also will help deduplicating `hashbrown` and `ahash`.
For #8060
- Bump `indexmap` to 2.0
- Remove unneeded `serde` feature from `indexmap`
# User-Facing Changes
None
# Description
`tabled`/`papergrid` already use `ansi-str 0.8` while `nu-explore`
itself was still depending on `0.7`. Single fix necessary to adapt to
the new API.
cc @zhiburt
# User-Facing Changes
None
requires
- https://github.com/nushell/nushell/pull/9455
# ⚙️ Description
in this PR i move the commands we've all agreed, in the core team, to
move out of the core Nushell to the `extra` feature.
> **Warning**
> in the first commits here, i've
> - moved the implementations to `nu-cmd-extra`
> - removed the declaration of all the commands below from `nu-command`
> - made sure the commands were not available anymore with `cargo run --
-n`
## the list of commands to move
with the current command table downloaded as `commands.csv`, i've run
```bash
let commands = (
open commands.csv
| where is_plugin == "FALSE" and category != "deprecated"
| select name category "approv. %"
| rename name category approval
| insert treated {|it| (
($it.approval == 100) or # all the core team agreed on them
($it.name | str starts-with "bits") or # see https://github.com/nushell/nushell/pull/9241
($it.name | str starts-with "dfr") # see https://github.com/nushell/nushell/pull/9327
)}
)
```
to preprocess them and then
```bash
$commands | where {|it| (not $it.treated) and ($it.approval == 0)}
```
to get all untreated commands with no approval, which gives
```
╭────┬───────────────┬─────────┬─────────────┬──────────╮
│ # │ name │ treated │ category │ approval │
├────┼───────────────┼─────────┼─────────────┼──────────┤
│ 0 │ fmt │ false │ conversions │ 0 │
│ 1 │ each while │ false │ filters │ 0 │
│ 2 │ roll │ false │ filters │ 0 │
│ 3 │ roll down │ false │ filters │ 0 │
│ 4 │ roll left │ false │ filters │ 0 │
│ 5 │ roll right │ false │ filters │ 0 │
│ 6 │ roll up │ false │ filters │ 0 │
│ 7 │ rotate │ false │ filters │ 0 │
│ 8 │ update cells │ false │ filters │ 0 │
│ 9 │ decode hex │ false │ formats │ 0 │
│ 10 │ encode hex │ false │ formats │ 0 │
│ 11 │ from url │ false │ formats │ 0 │
│ 12 │ to html │ false │ formats │ 0 │
│ 13 │ ansi gradient │ false │ platform │ 0 │
│ 14 │ ansi link │ false │ platform │ 0 │
│ 15 │ format │ false │ strings │ 0 │
╰────┴───────────────┴─────────┴─────────────┴──────────╯
```
# 🖌️ User-Facing Changes
```
$nothing
```
# 🧪 Tests + Formatting
- ⚫ `toolkit fmt`
- ⚫ `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# 📖 After Submitting
```
$nothing
```
# 🔍 For reviewers
```bash
$commands | where {|it| (not $it.treated) and ($it.approval == 0)} | each {|command|
try {
help $command.name | ignore
} catch {|e|
$"($command.name): ($e.msg)"
}
}
```
should give no output in `cargo run --features extra -- -n` and a table
with 16 lines in `cargo run -- -n`
# Description
The `users` crate hasn't been updated for a long time, this PR tries to
replace `users` with `nix`.
See [advisory
page](https://rustsec.org/advisories/RUSTSEC-2023-0040.html) for
additional details.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This pr is a completion of https://github.com/nushell/reedline/pull/598
After that pr is merged, we no longer need to disable bracketed mode in
nushell
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Description can be found [here:
https://github.com/nushell/nushell/discussions/9277#discussioncomment-5997793](https://github.com/nushell/nushell/discussions/9277#discussioncomment-5997793)
# User-Facing Changes
Again, examples can be found in the discussion #9277
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
I've written tests that cover the changes I've made.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR updates the sqlparser dep to 0.34.0.
closes#9525
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Checklist
- `nu-ansi-term` remains the same
- [x] `reedline` is released and updated
- [x] release scripts are updated for `nu-cmd-base`
- [x] info blog post is online
- [ ] release notes are ready
related to
- https://github.com/nushell/nushell/pull/9404
# Description
to support our cratification effort and moving non-1.0 commands outside
of the main focus, this PR
- creates a new `nu-cmd-base` crate to hold the common structs, traits
and functions used by all command-related crates
- to start the transition, moves the `input_handler` module from
`nu-command` to `nu-cmd-base`
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
This PR reverts https://github.com/nushell/nushell/pull/9391
We try not to revert PRs like this, though after discussion with the
Nushell team, we decided to revert this one.
The main reason is that Nushell, as a codebase, isn't ready for these
kinds of optimisations. It's in the part of the development cycle where
our main focus should be on improving the algorithms inside of Nushell
itself. Once we have matured our algorithms, then we can look for
opportunities to switch out technologies we're using for alternate
forms.
Much of Nushell still has lots of opportunities for tuning the codebase,
paying down technical debt, and making the codebase generally cleaner
and more robust. This should be the focus. Performance improvements
should flow out of that work.
Said another, optimisation that isn't part of tuning the codebase is
premature at this stage. We need to focus on doing the hard work of
making the engine, parser, etc better.
# User-Facing Changes
Reverts the HashMap -> ahash change.
cc @FilipAndersson245
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
this PR makes nushell use mimalloc as the default allocator, this has
the benefit of reducing startup time on my machine. `17%` on linux and
`22%` on windows, when testing using hyperfine.
the overhead to compile seem to be quite small, aswell as the increase
of binary size quite small
on linux the binary went from `33.1mb` to `33.2mb`
linux
windows
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Make sure that our different crates that contain commands can be
compiled in parallel.
This can under certain circumstances accelerate the compilation with
sufficient multithreading available.
## Details
- Move `help` commands from `nu-cmd-lang` back to `nu-command`
- This also makes sense as the commands are implemented in an
ANSI-terminal specific way
- Make `nu-cmd-lang` only a dev dependency for `nu-command`
- Change context creation helpers for `nu-cmd-extra` and
`nu-cmd-dataframe` to have a consistent api used in
`src/main.rs`:`get_engine_state()`
- `nu-command` now indepedent from `nu-cmd-extra` and `nu-cmd-dataframe`
that are now dependencies of `nu` directly. (change to internal
features)
- Fix tests that previously used `nu-command::create_default_context()`
with replacement functions
## From scratch compilation times:
just debug (dev) build and default features
```
cargo clean --profile dev && cargo build --timings
```
### before
### after
# User-Facing Changes
None direct, only change to compilation on multithreaded jobs expected.
# Tests + Formatting
Tests that previously chose to use `nu-command` for their scope will
still use `nu-cmd-lang` + `nu-command` (command list in the granularity
at the time)
# Description
This PR updates the ini dependency.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Update the polars dependency for dataframes to stay on-version.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
close#9335
I am not sure whether the fix was better to be delived as a minor bump
but it is what is is.
Could you @fdncred test it somehow?
I did it by checking out back the the original commit before the PR
refered in the issue.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
see https://github.com/nushell/nushell/issues/9390
using `ahash` instead of the default hasher. this will not affect
compile time as we where already building `ahash`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9218
When user execute some commands involve user input, currently if we
enable `bracketed_paste`, it will results strange behavior (Pasting `0~`
and `1~` around texts, e.g: `aaa` -> `0~aaa1~`) And this is why `gpg`
with paste failed.
Sorry that it's hard to make relative testing...
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I wanted to get the infrastructure in place for starters for our
*nu-cmd-extra* crate...
The plan is to put inside here the following commands...
* bits
* bytes
* math
I thought it would be easier to do one at a time as well as get the
nu-cmd-extra crate out there on crates.io
for this upcoming release...
Once this lands the infrastructure will be in place to move over the
other noted commands for now...
And then add other stuff we do NOT want to be in 1.0.
# Description
This PR updates most dependencies and tries to get in sync with
reedline.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Moves us over to dogfooding the git version of reedline ahead of the
next release.
# User-Facing Changes
With luck, you should see fewer bugs :D
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
All of the dataframe commands ported over with no issues...
### 11 tests are commented out (for now)
So 100 of the original 111 tests are passing with only 11 tests being
ignored for now..
As per our conversation in the core team meeting on Wednesday
I took @jntrnr suggestion and just commented out the tests dealing
with
[IntoDatetime](https://github.com/nushell/nushell/blob/main/crates/nu-command/src/conversions/into/mod.rs)
Later on we can move this functionality out of nu-command if we decide
it makes sense...
### The following tests were ignored...
```rust
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_day.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_hour.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_minute.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_month.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_nanosecond.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_ordinal.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_second.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_week.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_weekday.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_year.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/string/strftime.rs
```
# Description
This is a test PR to see if we can remove dependencies. The crates to
remove was generated from cargo machete. If ci works, I'll update the PR
to remove deps instead of comment them out.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Missed adding this with the 0.80.1 change.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This does part of the work of porting to polars 0.29.
However, I am not familiar enough with this part of the codebase to
finish it.
Things to be done:
- We match two times over `polars::Expr` but `Expr::Cache` isn't
handled. I don't know what should be done here
- `ArgExpr:::List` was renamed to `ArgExpr::Implode`. Does that mean
that `dfr list` should be renamed to `dfr implode`?
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Update polars to 0.28.
Luckily, it didn't require major changes.
# User-Facing Changes
None.
(Apart from the fact that certain error messages will stop breaking
table formatting)
# Description
Add option that combines both output streams to the `run-external`
command.
This allows you to do something like this:
```nushell
let res = do -i { run-external --redirect-combine <command that prints to stdout and stderr> } | complete
if $res.exit_code != 0 {
# Only print output when command has failed.
print "The command has failed, these are the logs:"
print $res.stdout
}
```
# User-Facing Changes
No breaking changes, just an extra option.
# Tests + Formatting
Added a test that checks the new option
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Co-authored-by: Jelle Besseling <jelle@bigbridge.nl>
close? #8060
Quite a bit of refactoring took place.
I believe a few improvements to collapse/expand were made.
I've tried to track any performance regressions and seems like it is
fine.
I've noticed something different now with default configuration path or
something in this regard?
So I might missed something while testing because of this.
Requires some oversight.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
This PR changes the `ast` command to be able to output `--json` as well
as `nuon` (default) with "pretty" and "minified" output. I'm hoping this
functionality will be usable in the vscode extension for semantic
tokenization and highlighting.
# User-Facing Changes
There's a new `--json`/`-j` option. Prior version output of nuon is
maintained as default.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This MR closes#8986; big thanks to @WindSoilder for investigating this
and making the MR very easy.
I did manual testing to confirm that the icon etc. are still being set
correctly after this change. Also skimmed the `winresource` code, no
issues jumped out at me.
# Description
This PR fixes the breaking changes to the reedline API due to
https://github.com/nushell/reedline/pull/562. It does not implement any
new features but just gets nushell back to compiling again.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Part of the larger cratification effort.
Moves all `reedline` or shell line editor specific commands to `nu-cli`.
## From `nu-cmd-lang`:
- `commandline`
- This shouldn't have moved there. Doesn't directly depend on reedline
but assumes parts in the engine state that are specific to the use of
reedline or a REPL
## From `nu-command`:
- `keybindings` and subcommands
- `keybindings default`
- `keybindings list`
- `keybindings listen`
- very `reedline` specific
- `history`
- needs `reedline`
- `history session`
## internal use
Instead of having a separate `create_default_context()` that calls
`nu-command`'s `create_default_context()`, I added a `add_cli_context()`
that updates an `EngineState`
# User-Facing Changes
None
## Build time comparison
`cargo build --timings` from a `cargo clean --profile dev`
### total
main: 64 secs
this: 59 secs
### `nu-command` build time
branch | total| codegen | fraction
---|---|---|---
main | 14.0s | 6.2s | (44%)
this | 12.5s | 5.5s | (44%)
`nu-cli` depends on `nu-command` at the moment.
Thus it is built during the code-gen phase of `nu-command` (on 16
virtual cores)
# Tests + Formatting
I removed the `test_example()` facilities for now as we had not run any
of the commands in an `Example` test and importing the right context for
those tests seemed more of a hassle than the duplicated
`test_examples()` implementations in `nu-cmd-lang` and `nu-command`
now nu_std only depends on nu_parser, nu_protocol and miette
and removes the nu_cli dependency
this enables developers moving forward to come along and implement their
own CLI's without having to pull in a redundant nu-cli which will not be
needed for them.
I did this by moving report_error into nu_protocol
which nu_std already has a dependency on anyway....
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# Description
as we now have a prelude thanks to #8627, i'd like to work on the
structure of the library 😋
and i think the first step is to make it a true standalone crate 😏
this PR
- moves all the library from `crates/nu-utils/standard_library/` to
`crates/nu-std/`
- moves the `rust` loading code from `src/run.rs` to
`crates/nu-std/src/lib.rs`
# Description
A compromise fix for #8162. Nushell range operator now accepts `..=` to
mean the range includes the top value, so you can use your Rust habits.
But the unadorned `..` range operator also includes the value, so you
can also use your Nushell habits.
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
```nushell
〉1..5
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
│ 4 │ 5 │
╰───┴───╯
-------------------------------------------- /home/bobhy/src/rust/nushell --------------------------------------------
〉1..=5
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
│ 4 │ 5 │
╰───┴───╯
-------------------------------------------- /home/bobhy/src/rust/nushell --------------------------------------------
〉1..<5
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
╰───┴───╯
```
# User-Facing Changes
Existing scripts with range operator will continue to operate as
heretofore.
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
Will update the book to include new syntax.
Bumps [tempfile](https://github.com/Stebalien/tempfile) from 3.4.0 to
3.5.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Stebalien/tempfile/blob/master/NEWS">tempfile's
changelog</a>.</em></p>
<blockquote>
<h1>3.5.0</h1>
<ul>
<li>Update rustix from 0.36 to 0.37.1. This makes wasi work on rust
stable</li>
<li>Update <code>windows-sys</code>, <code>redox_syscall</code></li>
<li>BREAKING: Remove the implementation of <code>Write for
&NamedTempFile<F> where &F: Write</code>. Unfortunately,
this can cause compile issues in unrelated code (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/224">Stebalien/tempfile#224</a>).</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/Stebalien/tempfile/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This adds a set of new flags on the `nu` binary intended for use in
IDEs. Here is the set of supported functionality so far:
* goto-def - go to the definition of a variable or custom command
* type hints - see the inferred type of variables
* check - see the errors in the document (currently only one error is
supported)
* hover - get information about the variable or custom command
* complete - get a completion list at the current position
# User-Facing Changes
No changes to the REPL experience. This only impacts the IDE scenario.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Bumps [spin](https://github.com/mvdnes/spin-rs) from 0.9.5 to 0.9.8.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/mvdnes/spin-rs/blob/master/CHANGELOG.md">spin's
changelog</a>.</em></p>
<blockquote>
<h1>[0.9.8] - 2023-04-03</h1>
<h3>Fixed</h3>
<ul>
<li>Unsoundness in <code>Once::try_call_once</code> caused by an
<code>Err(_)</code> result</li>
</ul>
<h1>[0.9.7] - 2023-03-27</h1>
<h3>Fixed</h3>
<ul>
<li>Relaxed accidentally restricted <code>Send</code>/<code>Sync</code>
bounds for <code>Mutex</code> guards</li>
</ul>
<h1>[0.9.6] - 2023-03-13</h1>
<h3>Fixed</h3>
<ul>
<li>Relaxed accidentally restricted <code>Send</code>/<code>Sync</code>
bounds for <code>RwLock</code> guards</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/mvdnes/spin-rs/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/nushell/nushell/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Version bump for the `0.78.0`
Start to include the version with our `default_config.nu` and
`default_env.nu`
# Checklist
- [x] reedline
- [ ] release notes
# Description
The two tests `to_nuon_from_nuon` and `to_nuon_from_nuon_string` were
taking multiple seconds and have since been superseded by more explicit
unit tests. Compared to the time cost for devs and CI they seldomly
returned explicit problems. One failure only popped up after months, as
a sampled failure (https://github.com/nushell/nushell/pull/7564).
# User-Facing Changes
none
# Tests + Formatting
Fuzzing should move to a separate worker and be removed from the main
test suite.
See #8575 for experimentation around the impact on our test coverage.
Bumps [miette](https://github.com/zkat/miette) from 5.5.0 to 5.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/zkat/miette/blob/main/CHANGELOG.md">miette's
changelog</a>.</em></p>
<blockquote>
<h2>5.6.0 (2023-03-14)</h2>
<h3>Bug Fixes</h3>
<ul>
<li><strong>ci:</strong> configure clippy-specific MSRV (<a
href="b658fc020b">b658fc02</a>)</li>
<li><strong>graphical:</strong> Fix wrong severity of related errors (<a
href="https://redirect.github.com/zkat/miette/issues/234">#234</a>) (<a
href="3497508aa9">3497508a</a>)</li>
<li><strong>atty:</strong> Switch out <code>atty</code> for
<code>is-terminal</code> (<a
href="https://redirect.github.com/zkat/miette/issues/229">#229</a>) (<a
href="443d240f49">443d240f</a>)</li>
</ul>
<h3>Features</h3>
<ul>
<li><strong>protocol:</strong> implement <code>Ord</code> for
<code>Severity</code> (<a
href="https://redirect.github.com/zkat/miette/issues/240">#240</a>) (<a
href="ed486c959d">ed486c95</a>)</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="78fe18e699"><code>78fe18e</code></a>
chore: Release</li>
<li><a
href="2335b25ee7"><code>2335b25</code></a>
docs: update changelog</li>
<li><a
href="443d240f49"><code>443d240</code></a>
fix(atty): Switch out <code>atty</code> for <code>is-terminal</code> (<a
href="https://redirect.github.com/zkat/miette/issues/229">#229</a>)</li>
<li><a
href="ed486c959d"><code>ed486c9</code></a>
feat(protocol): implement <code>Ord</code> for <code>Severity</code> (<a
href="https://redirect.github.com/zkat/miette/issues/240">#240</a>)</li>
<li><a
href="3497508aa9"><code>3497508</code></a>
fix(graphical): Fix wrong severity of related errors (<a
href="https://redirect.github.com/zkat/miette/issues/234">#234</a>)</li>
<li><a
href="b658fc020b"><code>b658fc0</code></a>
fix(ci): configure clippy-specific MSRV</li>
<li><a
href="ebc61b5cf8"><code>ebc61b5</code></a>
docs: Mention miette::miette! macro under "... in application
code" (<a
href="https://redirect.github.com/zkat/miette/issues/233">#233</a>)</li>
<li><a
href="14f952dc91"><code>14f952d</code></a>
(cargo-release) start next development iteration 5.5.1-alpha.0</li>
<li><a
href="128c0a1fae"><code>128c0a1</code></a>
(cargo-release) start next development iteration 5.5.1-alpha.0</li>
<li>See full diff in <a
href="https://github.com/zkat/miette/compare/miette-derive-v5.5.0...miette-derive-v5.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR forces nushell to use the reedline main branch instead of the
published crate so that we can test the changes in the latest reedline
main branch.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
I was looking where we could remove the usage of once-cell dependency.
As for now, I only found one place. Not a terrible improvement, but at
least, it removes a dependency nu-test-support crate.
Relies on `Mutex::new` constified in Rust 1.63.0
# Description
Add a `command_not_found` function to `$env.config.hooks`. If this
function outputs a string, then it's included in the `help`.
An example hook on *Arch Linux*, to find packages that contain the
binary, looks like:
```nushell
let-env config = {
# ...
hooks: {
command_not_found: {
|cmd_name| (
try {
let pkgs = (pkgfile --binaries --verbose $cmd_name)
(
$"(ansi $env.config.color_config.shape_external)($cmd_name)(ansi reset) " +
$"may be found in the following packages:\n($pkgs)"
)
} catch {
null
}
)
}
# ...
```
# User-Facing Changes
- Add a `command_not_found` function to `$env.config.hooks`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fixes the `commandline` command when it's run with no arguments, so
it outputs the command being run. New line characters are included.
This allows for:
- [A way to get current command inside pre_execution hook · Issue #6264
· nushell/nushell](https://github.com/nushell/nushell/issues/6264)
- The possibility of *Atuin* to work work *Nushell*. *Atuin* hooks need
to know the current repl input before it is run.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
