Changes to reedline since `v0.4.0`:
- vi normal mode `I` for inserting at line beginning
- `InsertNewline` edit command that can be bound to `Alt-Enter` if
desired to have line breaks without relying on the `Validator`
- `ClearScreen` will directly clear the visible screen. `Signal::CtrlL` has been
removed.
- `ClearScrollback` will clear the screen and scrollback. Can be used to
mimic macOS `Cmd-K` screen clearing. Helps with #5089
* nu-cli: added tests for file completions
* test adding extra sort
* Feature/refactor completion options (#5228)
* Copy completion filter to custom completions
* Remove filter function from completer
This function was a no-op for FileCompletion and CommandCompletion.
Flag- and VariableCompletion just filters with `starts_with` which
happens in both completers anyway and should therefore also be a no-op.
The remaining use case in CustomCompletion was moved into the
CustomCompletion source file.
Filtering should probably happen immediately while fetching completions
to avoid unnecessary memory allocations.
* Add get_sort_by() to Completer trait
* Remove CompletionOptions from Completer::fetch()
* Fix clippy lints
* Apply Completer changes to DotNuCompletion
* add os to $nu based on rust's understanding (#5243)
* add os to $nu based on rust's understanding
* add a few more constants
Co-authored-by: Richard <Tropid@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Copy completion filter to custom completions
* Remove filter function from completer
This function was a no-op for FileCompletion and CommandCompletion.
Flag- and VariableCompletion just filters with `starts_with` which
happens in both completers anyway and should therefore also be a no-op.
The remaining use case in CustomCompletion was moved into the
CustomCompletion source file.
Filtering should probably happen immediately while fetching completions
to avoid unnecessary memory allocations.
* Add get_sort_by() to Completer trait
* Remove CompletionOptions from Completer::fetch()
* Fix clippy lints
* Apply Completer changes to DotNuCompletion
Prior to this change we would recover the names for known
externals by looking up the span in the engine state. This would fail
when using an alias for two reasons:
1. In cases where we don't have a subcommand, like this:
```
>>> extern bat [filename: string]
>>> alias b = bat
>>> bat some_file
'b' is not recognized as an internal or external command,
operable program or batch file.
```
The problem is that after alias expansion, we replace the span of the
expanded name with the original alias (this is done to alleviate
non-related issues). The span contents we look up therefore contain `b`,
the alias, instead of the expanded command name.
2. In cases where there's a subcommand:
```
>>> alias g = git
>>> g push
thread 'main' panicked at 'internal error: span missing in file contents cache', crates\nu-protocol\src\engine\engine_state.rs:474:9
note: run with `RUST_BACKTRACE=1` environment variable to display a
backtrace
```
In this case, the span in call starts where the expansion for the `g`
alias is defined and end after `push` on the last command entered. This
is not a proper span and causes a panic when we try to look it up. Note
that this is the case for all expanded aliases that involve a
subcommand, but we never actually try to retrieve the contents for that
span in other cases.
Anyway, the new way of looking up the name is arguably cleaner
regardless of the issues mentioned above. But it's nice that it fixes
them too.
Co-authored-by: Hristo Filaretov <h.filaretov@protonmail.com>
This commit renders ANSI chars in order to provide shell integrations
such Kitty's opening feature that captures the output of the last
command in a pager such as less.
Fixes#5138
- With a change to reedline hints can now be hidden. This is useful when
no ANSI coloring is available as hints become indistinguishable from the
actual buffer
- remove commented out code
- order the logging calls according to the implementation
I don't personally agree with this; I'd prefer less magic,
and not expanding _anything_ except `~` as an initial path element
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
To remove a default keybinding for a particular edit mode, set the `event: null`:
e.g. to disable screen clearing with Ctrl-L
```
let $config = {keybindings: [{
modifier: control
keycode: char_l
mode: [emacs, vi_normal, vi_insert]
event: null
} ]}
```
* Remove unused packages from base Cargo.toml
* Remove unused crossterm_winapi from nu-cli
* Remove unused dependencies from nu-system
* Remove unused dependencies from nu-test-support
* Initial implementation of ordered call args
* Run cargo fmt
* Fix some clippy lints
* Add positional len and nth
* Cargo fmt
* Remove more old nth calls
* Good ole rustfmt
* Add named len
Co-authored-by: Hristo Filaretov <h.filaretov@protonmail.com>
* Include license text in all crates
Three crates already have license texts, so I'm keeping them, but
symlinking the `LICENSE` from the top level to the rest of the crate
directories. This works as long as `cargo publish` is done on a Unix-y
system and not Windows.
Also bump the copyright year to end in 2022.
Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org>
* Replace symlinks
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* Add timestamp flag to `touch` command
* Add modify flag to `touch` command
* Add date flag to `touch` command
* Remove unnecessary `touch` test and fix tests setups
* Change `touch` flags descriptions
* Update `touch` example
* Add reference flag to `touch` command
* Add access flag to `touch` command
* Add no-create flag to `touch` command
* Replace `unwrap` with `expect`
* updated to reedline generic menus
* help menu with examples
* generic menus in the engine
* description menu template
* list of menus in config
* default value for menu
* menu from block
* generic menus examples
* change to reedline git path
* cargo fmt
* menu name typo
* remove commas from default file
* added error message
* Remove panic from BlockCommands run function
Instead of panicing, the run method now returns an error to prevent
nushell from unexpected termination.
* Add ability to open command to run with blocks
The open command tries to parse the content of the file
if there is a command called 'from (file ending)'. This works
fine if the command was 'built in' because the run method doesn't
fail in this case. It did fail on a BlockCommand, though.
This change will first probe if the command contains a block and
evaluate it, if this is the case. If there is no block, it will run
the command the same way as before.
* Add test open files with BlockCommands
* Update open.rs
* Adjust file type on open with BlockCommand parser
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Enables the use of some features on reedline
- Keeping the line when clearing the screen with `Ctrl-L`
- Using the internal cut buffer between lines
- Submitting external commands via keybinding and keeping the line
Additional effect:
Keep the history around and do basic syncs (performance improvement
minimal as session changes have to be read and written)
Additional change:
Give the option to defer writing/rereading the history file to the
closing of the session ($config.sync_history_on_enter)
* fix(filters): pass metadata for select
* fix(filters): pass metadata for group, window
* fix(filters): pass metadata for each, every
* fix(filters): pass metadata for collect, compact, flatten
* fix(filters): pass metadata for get
* fix: get rid of necessary `.clone()``
* style: rename closure call to be consistent w/ others
* fix(filters): pass metadata for par-each, prepend
* fix(filters): pass metadata for range
* fix(filters): pass metadata for reject
* fix(filters): pass metadata for more commands
* style: run cargo fmt
* Add search terms to command
* Rename Signature desc to usage
To be named uniformly with extra_usage
* Throw in foldl search term for reduce
* Add missing usage to post
* Add search terms to signature
* Try to add capnp Signature serialization
* nu-completer with suggestions
* help menu with scrolling
* updates description rows based on space
* configuration for help menu
* update nu-ansi-term
* corrected test for update cells
* changed keybinding
* Add streaming support to save for ExternalStream data
Prior to this change, save would collect data from an ExternalStream (data
originating from externals) consuming memory for the full amount of data piped
to it,
This change adds streaming support for ExternalStream allowing saving of
arbitrarily large files and bounding memory usage.
* Remove broken save test
This test passes but not for the right reasons, since this test was
written filename has become a required parameter. The parser outputs
an error but the test still passes as is checking the original un-mutated
file assuming save has re-written the contents.
This change removes the test.
```
running 1 test
=== stderr
Error: nu::parser::missing_positional (https://docs.rs/nu-parser/0.60.0/nu-parser/enum.ParseError.html#variant.MissingPositional)
× Missing required positional argument.
╭─[source:1:1]
1 │ open save_test_1/cargo_sample.toml | save
· ▲
· ╰── missing filename
╰────
help: Usage: save {flags} <filename>
test commands::save::figures_out_intelligently_where_to_write_out_with_metadata ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 515 filtered out; finished in 0.10s
```
* Add test for passing binary data through externals
This change adds an ignored test to confirm that binary data is passed
correctly between externals to be enabled in a later commit along with
the fix.
To assist in platform agnostic testing of binary data a couple of
additional testbins were added to allow testing on `Value::Binary` inside
`ExternalStream`.
* Support binary data to stdin of run-external
Prior to this change, any pipeline producing binary data (not detected
as string) then feed into an external would be ignored due to
run-external only supporting `Value::String` on stdin.
This change adds binary stdin support for externals allowing something
like this for example:
〉^cat /dev/urandom | ^head -c 1MiB | ^pv -b | ignore
1.00MiB
This would previously output `0.00 B [0.00 B/s]` due to the data not
being pushed to stdin at each stage.
Prior to this change, a pipeline of externals would result in high memory
usage if any of the producers in the chain, produced data faster than
the consumers.
For example a pipeline:
> fast-producer | slow-consumer
Would cause a build up of `Value::{String,Binary}`'s in the mpsc channels
between each command as values are added to the channels faster than they
are consumed, eventually OOM'ing depnding on system resources, the volume
of data and speed diff. between fast v's slow.
This change replaces the unbounded channels with bounded channels
to limit the number of values that can build up and providing
back-pressure to limit ram usage.
* Add android as target os for procfs-based ps
* Turn off code for dealing with trash on platforms which are known to not support a standard trash protocol
* Update lib.rs
* Update lib.rs
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Fix path when expanding tilde
Expanding tilde with no other relative paths would result in:
`$HOME/` instead of `$HOME`. This occurs when users run `cd` with
no extra arguments. In that case, the user's PWD would include the
trailing separator. This does not happen when explicitly passing
a value, such as `cd ~`, because in that case, the path would be
canonicalized.
This happens because std::path::PathBuf::push always adds a separator,
even if adding an empty path, which is what happens when `cd` is
invoked.
* Add test
* Fix test on Windows
Co-authored-by: Hristo Filaretov <h.filaretov@protonmail.com>
* Fix alias import
Alias importing was registering the alias id as a decl instead of alias.
This caused issues when hiding and then reimporting the alias.
* Clippy format
Co-authored-by: Hristo Filaretov <h.filaretov@protonmail.com>
