# Description
* Primary purpose is to fix an issue with a missing escaped opening
parenthesis in the warning message when running an old `dirs` alias.
This was creating an error condition from improper interpolation.
Also
* Incorporates #13842 feedback from @kubouch by renaming `std/lib` to
`std/util`
* Removes duplication of code in `export-env`
* Renames submodule exports to `std/<submodule>` rather than
`./<submodule>` - No user-facing change other than `view files` appears
"prettier".
* In #13842, I converted the test cases to use `use std/<module>`
syntax. Previously, the tests were (effectively) using `use std *` (due
to pre-existing bugs, now fixed).
So "before", we only had test coverage on `use std *`, and "after" we
only had test coverage on `use std/<module>`. I've started adding test
cases so that we have coverage on *both* scenarios going forward.
For now, `formats` and `util` have been updated with tests for both
scenarios. I'll continue adding the others in future PRs.
# User-Facing Changes
No user-facing changes - Bug fix, refactor, and test cases only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Still working on updating the Doc. I ran into the `dirs` issue while
writing it and rabbit-trailed to fix it in this PR.
# Description
After a `use std *`, the environment variables exported from the
submodules' `export-env` blocks are not available because of #13403.
This causes failures in `log` (currently) and will cause issues in
`dirs` once we stop autoloading it separately.
When the submodules are loaded separately (e.g., `use std/log`),
everything already worked correctly. While this is the preferred way of
doing it, we also want `use std *` to work properly.
This is a workaround for the standard library submodules. It is
definitely not ideal, but it can be removed when and if #13403 is fixed.
For now, we need to duplicate any environment settings in both the
submodules (when loaded with `use std/log`) and in the standard library
itself (when loaded with `use std *`). Again, this should not be
necessary, but currently is because of #13403.
# User-Facing Changes
Bug fix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fxes https://github.com/nushell/nupm/issues/102
Not loading `std` at startup has caused an issue with nupm and std where
the `dirs` module name clashes and nupm won't load. This was technically
a preexisting bug that was previously masked. This could have been fixed
(and also should be) by changing the import statement in nupm, but the
potential for collision would remain in other (user) modules.
This PR explicitly sets the relative path for the import statements in
`std/mod.nu` so that there are no collisions.
# User-Facing Changes
Bugfix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Updated summary for commit
[612e0e2](612e0e2160)
- While folks are welcome to read through the entire comments, the core
information is summarized here.
# Description
This PR drastically improves startup times of Nushell by only parsing a
single submodule of the Standard Library that provides the `banner` and
`pwd` commands. All other Standard Library commands and submodules are
parsed when imported by the user. This cuts startup times by more than
60%.
At the moment, we have stopped adding to `std-lib` because every
addition adds a small amount to the Nushell startup time.
With this change, we should once again be able to allow new
functionality to be added to the Standard Library without it impacting
`nu` startup times.
# User-Facing Changes
* Nushell now starts about 60% faster
* Breaking change: The `dirs` (Shells) aliases will return a warning
message that it will not be auto-loaded in the following release, along
with instructions on how to restore it (and disable the message)
* The `use std <submodule> *` syntax is available for convenience, but
should be avoided in scripts as it parses the entire `std` module and
all other submodules and places it in scope. The correct syntax to
*just* load a submodule is `use std/<submodule> *` (asterisk optional).
The slash is important. This will be documented.
* `use std *` can be used for convenience to load all of the library but
still incurs the full loading-time.
* `std/dirs`: Semi-breaking change. The `dirs` command replaces the
`show` command. This is more in line with the directory-stack
functionality found in other shells. Existing users will not be impacted
by this as the alias (`shells`) remains the same.
* Breaking-change: Technically a breaking change, but probably only
impacts maintainers of `std`. The virtual path for the standard library
has changed. It could previously be imported using its virtual path (and
technically, this would have been the correct way to do it):
```nu
use NU_STDLIB_VIRTUAL_DIR/std
```
The path is now simply `std/`:
```nu
use std
```
All submodules have moved accordingly.
# Timings
Comparisons below were made:
* In a temporary, clean config directory using `$env.XDG_CONFIG_HOME =
(mktemp -d)`.
* `nu` was run with a release build
* `nu` was run one time to generate the default `config.nu` (etc.) files
- Otherwise timings would include the user-prompt
* The shell was exited and then restarted several times to get timing
samples
(Note: Old timings based on 0.97 rather than 0.98, but in the range of
being accurate)
| Scenario | `$nu.startup-time` |
| --- | --- |
| 0.97.2
([aaaab8e](aaaab8e070))
Without this PR | 23ms - 24ms |
| This PR with deprecated commands | 9ms - <11ms |
| This PR after deprecated commands are removed in following release |
8ms - <10ms |
| Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms |
| Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms
|
| Final PR (remove deprecated), using `--no-config-file --no-std-lib` |
1ms - 1.5ms |
*These last two timings point to the opportunity for further
optimization (see comment in thread below (will link once I write it).*
# Implementation details for future maintenance
* `use std banner` is a ridiculously deceptive call. That call parses
and imports *all* of `std` into scope. Simply replacing it with `use
std/core *` is essentially what saves ~14-15ms. This *only* imports the
submodule with the `banner` and `pwd` commands.
* From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was
used as a prefix was so that there wouldn't be an issue if a user had a
`./std/mod.nu` in the current directory. This does **not** appear to be
an issue. After removing the prefix, I tested with both a relative
module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases
the *internal* `std` still took precedence.
* By removing the prefix, users can now `use std` (and variants) without
requiring that it already be parsed and in scope.
* In the next release, we'll stop autoloading the `dirs` (shells)
functionality. While this only costs an additional 1-1.5ms, I think it's
better moved to the `config.nu` where the user can optionally remove it.
The main reason is its use of aliases (which have also caused issues) -
The `n`, `p`, and `g` short-commands are valuable real-estate, and users
may want to map these to something else.
For this release, there's an `deprecated_dirs` module that is still
autoloaded. As with the top-level commands, use of these will give a
deprecation warning with instructions on how to handle going forward.
To help with this, moved the aliases to their own submodule inside the
`dirs` module.
* Also sneaks in a small change where the top-level `dirs` command is
now the replacement for `dirs show`
* Fixed a double-import of `assert` in `dirs.nu`
* The `show_banner` step is replaced with simply `banner` rather than
re-importing it.
* A `virtual_path` may now be referenced with either a forward-slash or
a backward-slash on Windows. This allows `use std/<submodule>` to work
on all platforms.
# Performance side-notes:
* Future parsing and/or IR improvements should improve performance even
further.
* While the existing load time penalty of `std-lib` was not noticeable
on many systems, Nushell runs on a wide-variety of hardware and OS
platforms. Slower platforms will naturally see a bigger jump in
performance here. For users starting multiple Nushell sessions
frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended
to keep total startup time (including user configuration) under ~250ms.
# Tests + Formatting
* All tests are green
* Updated tests:
- Removed the test that confirmed that `std` was loaded (since we
don't).
- Removed the `shells` test since it is not autoloaded. Main `dirs.nu`
functionality is tested through `stdlib-test`.
- Many tests assumed that the library was fully loaded, because it was
(even though we didn't intend for it to be). Fixed those tests.
- Tests now import only the necessary submodules (e.g., `use
std/assert`, rather than `use std assert`)
- Some tests *thought* they were loading `std/log`, but were doing so
improperly. This was masked by the now-fixed "load-everything-into-scope
bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being
inherited from the calling process, but would fail in the "clean" GitHub
CI environment. These tests have also been fixed.
* Added additional tests for the changes
# After Submitting
Will update the Standard Library doc page
# Description
The standard library's `path add` function has some surprising side
effects that I attempt to address in this PR:
1. Paths added, if they are symbolic links, should not be resolved to
their targets. Currently, resolution happens.
Imagine the following:
```nu
# Some time earlier, perhaps even not by the user, a symlink is created
mkdir real-dir
ln -s real-dir link-dir
# Then, step to now, with link-dir that we want in our PATHS variable
use std
path add link-dir
```
In the current implementation of `path add`, it is _not_ `link-dir` that
will be added, as has been stated in the command. It is instead
`real-dir`. This is surprising. Users have the agency to do this
resolution if they wish with `path expand` (sans a `--no-symlink` flag):
for example, `path add (link-dir | path expand)`
In particular, when I was trying to set up
[fnm](https://github.com/Schniz/fnm), a Node.js version manager, I was
bitten by this fact when `fnm` told me that an expected path had not
been added to the PATHS variable. It was looking for the non-resolved
link. The user in [this
comment](https://github.com/Schniz/fnm/issues/463#issuecomment-1710050737)
was likely affected by this too.
Shells, such as nushell, can handle path symlinks just fine. Binary
lookup is unaffected. Let resolution be opt-in.
Lastly, there is some convention already in place for **not** resolving
path symlinks in the [default $env.ENV_CONVERSIONS
table](57452337ff/crates/nu-utils/src/sample_config/default_env.nu (L65)).
2. All existing paths in the path variable should be left untouched.
Currently, they are `path expand`-ed (including symbolic link
resolution).
Path add should mean just that: prepend/append this path.
Instead, it currently means that, _plus mutate all other paths in the
variable_.
Again, users have the agency to do this with something like `$env.PATH =
$env.PATH | split row (char esep) | path expand`.
3. Minorly, I update documentation on running tests in
`crates/nu-std/CONTRIBUTING.md`. The offered command to run the standard
library test suite was no longer functional. Thanks to @weirdan in [this
Discord
conversation](https://discord.com/channels/601130461678272522/614593951969574961/1256029201119576147)
for the context.
# User-Facing Changes
(Written from the perspective of release notes)
- The standard library's `path add` function no longer resolves symlinks
in either the newly added paths, nor the other paths already in the
variable.
# Tests + Formatting
A test for the changes working correctly has been added to
`crates/nu-std/tests/test_std.nu` under the test named
`path_add_expand`.
You can quickly verify this new test and the existing `path add` test
with the following command:
```nu
cargo run -- -c 'use crates/nu-std/testing.nu; NU_LOG_LEVEL=INFO testing run-tests --path crates/nu-std --test path_add'
```
All commands suggested in the issue template have been run and complete
without error.
# After Submitting
I'll add a release note to [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged.
# Description
`help banner` had several issues:
* It used a Markdown link to an Asciinema recording, but Markdown links
aren't rendered as Markdown links by the help system (and can't be,
since (most?) terminals don't support that)
* Minor grammatical issues
* The Asciinema recording is out of date anyway. It still uses `use
stdn.nu banner` which isn't valid syntax any longer.
Since everyone at this point knows exactly what `banner` does 😉, I chose
to simply remove the link to the recording. Also tweaked the text
(initial caps and removed comma).
# User-Facing Changes
Help only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This PR adds min and max to the bench command.
```nushell
❯ use std bench
❯ bench { dply -c 'parquet("./data.parquet") | group_by(year) | summarize(count = n(), sum = sum(geo_count)) | show()' | complete | null } --rounds 100 --verbose
100 / 100
╭───────┬───────────────────╮
│ mean │ 71ms 358µs 850ns │
│ min │ 66ms 457µs 583ns │
│ max │ 120ms 338µs 167ns │
│ std │ 6ms 553µs 949ns │
│ times │ [list 100 items] │
╰───────┴───────────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This is the first PR towards migrating to a new `$env.PWD` API that
returns potentially un-canonicalized paths. Refer to PR #12515 for
motivations.
## New API: `EngineState::cwd()`
The goal of the new API is to cover both parse-time and runtime use
case, and avoid unintentional misuse. It takes an `Option<Stack>` as
argument, which if supplied, will search for `$env.PWD` on the stack in
additional to the engine state. I think with this design, there's less
confusion over parse-time and runtime environments. If you have access
to a stack, just supply it; otherwise supply `None`.
## Deprecation of other PWD-related APIs
Other APIs are re-implemented using `EngineState::cwd()` and properly
documented. They're marked deprecated, but their behavior is unchanged.
Unused APIs are deleted, and code that accesses `$env.PWD` directly
without using an API is rewritten.
Deprecated APIs:
* `EngineState::current_work_dir()`
* `StateWorkingSet::get_cwd()`
* `env::current_dir()`
* `env::current_dir_str()`
* `env::current_dir_const()`
* `env::current_dir_str_const()`
Other changes:
* `EngineState::get_cwd()` (deleted)
* `StateWorkingSet::list_env()` (deleted)
* `repl::do_run_cmd()` (rewritten with `env::current_dir_str()`)
## `cd` and `pwd` now use logical paths by default
This pulls the changes from PR #12515. It's currently somewhat broken
because using non-canonicalized paths exposed a bug in our path
normalization logic (Issue #12602). Once that is fixed, this should
work.
## Future plans
This PR needs some tests. Which test helpers should I use, and where
should I put those tests?
I noticed that unquoted paths are expanded within `eval_filepath()` and
`eval_directory()` before they even reach the `cd` command. This means
every paths is expanded twice. Is this intended?
Once this PR lands, the plan is to review all usages of the deprecated
APIs and migrate them to `EngineState::cwd()`. In the meantime, these
usages are annotated with `#[allow(deprecated)]` to avoid breaking CI.
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
Work for #7149
- **Error `with-env` given uneven count in list form**
- **Fix `with-env` `CantConvert` to record**
- **Error `with-env` when given protected env vars**
- **Deprecate list/table input of vars to `with-env`**
- **Remove examples for deprecated input**
# User-Facing Changes
## Deprecation of the following forms
```
> with-env [MYENV "my env value"] { $env.MYENV }
my env value
> with-env [X Y W Z] { $env.X }
Y
> with-env [[X W]; [Y Z]] { $env.W }
Z
```
## recommended standardized form
```
# Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
╭───┬───╮
│ 0 │ Y │
│ 1 │ Z │
╰───┴───╯
```
## (Side effect) Repeated definitions in an env shorthand are now
disallowed
```
> FOO=bar FOO=baz $env
Error: nu:🐚:column_defined_twice
× Record field or table column used twice: FOO
╭─[entry #1:1:1]
1 │ FOO=bar FOO=baz $env
· ─┬─ ─┬─
· │ ╰── field redefined here
· ╰── field first defined here
╰────
```
# Description
This PR cleans up https://github.com/nushell/nushell/pull/11331. One
line was missed that caused the CI to break.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
should
- close https://github.com/nushell/nushell/issues/11133
# Description
to allow more freedom when writing complex modules, we are disabling the
auto-export of director modules.
the change was as simple as removing the crawling of files and modules
next to any `mod.nu` and update the standard library.
# User-Facing Changes
users will have to explicitely use `export module <mod>` to define
submodules and `export use <mod> <cmd>` to re-export definitions, e.g.
```nushell
# my-module/mod.nu
export module foo.nu # export a submodule
export use bar.nu bar-1 # re-export an internal command
export def top [] {
print "`top` from `mod.nu`"
}
```
```nushell
# my-module/foo.nu
export def "foo-1" [] {
print "`foo-1` from `lib/foo.nu`"
}
export def "foo-2" [] {
print "`foo-2` from `lib/foo.nu`"
}
```
```nushell
# my-module/bar.nu
export def "bar-1" [] {
print "`bar-1` from `lib/bar.nu`"
}
```
# Tests + Formatting
i had to add `export module` calls in the `tests/modules/samples/spam`
directory module and allow the `not_allowed` module to not give an
error, it is just empty, which is fine.
# After Submitting
- mention in the release note
- update the following repos
```
#┬─────name─────┬version┬─type─┬─────────repo─────────
0│nu-git-manager│0.4.0 │module│amtoine/nu-git-manager
1│nu-scripts │0.1.0 │module│amtoine/scripts
2│nu-zellij │0.1.0 │module│amtoine/zellij-layouts
3│nu-scripts │0.1.0 │module│nushell/nu_scripts
4│nupm │0.1.0 │module│nushell/nupm
─┴──────────────┴───────┴──────┴──────────────────────
```
- Replaced `start`/`end` with span.
- Fixed standard library.
- Add `help` option.
- Add a couple more errors for invalid record types.
Resolve#10914
# Description
# User-Facing Changes
- **BREAKING CHANGE:** `error make` now takes in `span` instead of
`start`/`end`:
```Nushell
error make {
msg: "Message"
label: {
text: "Label text"
span: (metadata $var).span
}
}
```
- `error make` now has a `help` argument for custom error help.
related to
-
https://discord.com/channels/601130461678272522/614593951969574961/1162406310155923626
# Description
this PR
- does a bit of minor refactoring
- makes sure the input paths get expanded
- makes sure the input PATH gets split on ":"
- adds a test
- fixes the other tests
# User-Facing Changes
should give a better overall experience with `std path add`
# Tests + Formatting
adds a new test case to the `path_add` test and fixes the others.
# After Submitting
related to
- https://github.com/nushell/nushell/pull/10456
# Description
this PR will fix the public API of the standard library by removing the
type annotations from public boolean switches.
1. the signature before
```nushell
clip [--silent: bool, --no-notify: bool, --no-strip: bool, --expand (-e): bool, --codepage (-c): int]
```
2. the signature after
```nushell
clip [--silent, --no-notify, --no-strip, --expand (-e), --codepage (-c): int]
```
# User-Facing Changes
### before
```nushell
> "foo" | clip
Error: nu:🐚:cant_convert
× Can't convert to bool.
╭─[NU_STDLIB_VIRTUAL_DIR/std/mod.nu:148:1]
148 │ $in
149 │ | if $expand { table --expand } else { table }
· ───┬───
· ╰── can't convert nothing to bool
150 │ | into string
╰────
```
### after
```nushell
> "foo" | clip
foo
saved to clipboard
```
# Tests + Formatting
# After Submitting
# Description
By using a `from: 1` the additional subexpression for `to` becomes
unnecessary.
Saves additional evaluation steps if `std repeat` is frequently used
with low `n`
# User-Facing Changes
None
# Tests + Formatting
(-)
related to
- https://github.com/nushell/nushell/issues/10233
- https://github.com/nushell/nushell/pull/10293
- https://github.com/nushell/nushell/pull/10292
inspired by @kubouch
# Description
this PR adds a `repeat` command to the standard library
# User-Facing Changes
a new `repeat` command in `std`
```nushell
repeat anything a bunch of times, yielding a list of *n* times the input
# Examples
repeat a string
> "foo" | std repeat 3 | str join
"foofoofoo"
Usage:
> repeat <n>
Flags:
-h, --help - Display the help message for this command
Parameters:
n <int>: the number of repetitions, must be positive
Input/output types:
╭───┬───────┬───────────╮
│ # │ input │ output │
├───┼───────┼───────────┤
│ 0 │ any │ list<any> │
╰───┴───────┴───────────╯
```
# Tests + Formatting
a new test called `repeat_things` in `test_std.nu`
# After Submitting
# Description
We keep "into decimal" for a release and warn through a message that it
will be removed in 0.86.
All tests are updated to use `into float`
# User-Facing Changes
`into decimal` raises a deprecation warning, will be removed soon.
Use `into float` as the new functionally identical command instead.
```
~/nushell> 2 | into decimal
Error: × Deprecated command
╭─[entry #1:1:1]
1 │ 2 | into decimal
· ──────┬─────
· ╰── `into decimal` is deprecated and will be removed in 0.86.
╰────
help: Use `into float` instead
2
```
# Tests + Formatting
Updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
related to
-
https://discord.com/channels/601130461678272522/615253963645911060/1142060647358668841
# Description
in order to make the charpage for Windows as general as possible, `chcp`
will only run on Windows when `--charpage` is given an integer.
while i was at it, i fixed the system messages given to
`check-clipboard` because some of the were incorrect => see the second
commit 6865ec9a5
# User-Facing Changes
this is a breaking change as users relying on the fact that `std clip`
changed the page to `65001` by itself is not true anymore => they will
have to add `--charpage 65001`.
# Tests + Formatting
# After Submitting
# Description
For years, Nushell has used `let-env` to set a single environment
variable. As our work on scoping continued, we refined what it meant for
a variable to be in scope using `let` but never updated how `let-env`
would work. Instead, `let-env` confusingly created mutations to the
command's copy of `$env`.
So, to help fix the mental model and point people to the right way of
thinking about what changing the environment means, this PR removes
`let-env` to encourage people to think of it as updating the command's
environment variable via mutation.
Before:
```
let-env FOO = "BAR"
```
Now:
```
$env.FOO = "BAR"
```
It's also a good reminder that the environment owned by the command is
in the `$env` variable rather than global like it is in other shells.
# User-Facing Changes
BREAKING CHANGE BREAKING CHANGE
This completely removes `let-env FOO = "BAR"` so that we can focus on
`$env.FOO = "BAR"`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After / Before Submitting
integration scripts to update:
- ✔️
[starship](https://github.com/starship/starship/blob/master/src/init/starship.nu)
- ✔️
[virtualenv](https://github.com/pypa/virtualenv/blob/main/src/virtualenv/activation/nushell/activate.nu)
- ✔️
[atuin](https://github.com/ellie/atuin/blob/main/atuin/src/shell/atuin.nu)
(PR: https://github.com/ellie/atuin/pull/1080)
- ❌
[zoxide](https://github.com/ajeetdsouza/zoxide/blob/main/templates/nushell.txt)
(PR: https://github.com/ajeetdsouza/zoxide/pull/587)
- ✔️
[oh-my-posh](https://github.com/JanDeDobbeleer/oh-my-posh/blob/main/src/shell/scripts/omp.nu)
(pr: https://github.com/JanDeDobbeleer/oh-my-posh/pull/4011)
# Description
Test runner now performs following actions in order to run tests:
* Module file is opened
* Public function with random name is added to the source code, this
function calls user-specified private function
* Modified module file is saved under random name in $nu.temp-path
* Modified module file is imported in subprocess, injected function is
called by the test runner
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* Test functions no longer need to be exported
* test functions no longer need to reside in separate test_ files
* setup and teardown renamed to before-each and after-each respectively
* before-all and after-all functions added that run before all tests in
given module. This matches the behavior of test runners used by other
languages such as JUnit/TestNG or Mocha
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Kamil <skelly37@protonmail.com>
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
I have (hopefully) simplified the `log.nu` internal structure and added
customizable log format for all `log` commands
# User-Facing Changes
- [x] Replaced constants with env records for:
- ansi (newly added)
- log level
- prefix
- short prefix
- [x] Added `format` argument to all log commands
- [x] Assertions for (not) equality (equal, not equal, greater,
lesser...) now put left and right values inside `'` quotes, so the
assertions for strings are more meaningful
- [x] Documented the %-formatting of log messages
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
related to the namespace bullet point in
- https://github.com/nushell/nushell/issues/8450
# Description
this was the last module of the standard library with a broken
namespace, this PR takes care of this.
- `run-tests` has been moved to `std/mod.nu`
- `std/testing.nu` has been moved to `std/assert.nu`
- the namespace has been fixed
- `assert` is now called `main` and used in all the other `std assert`
commands
- for `std assert length` and `std assert str contains`, in order not to
shadow the built-in `length` and `str contains` commands, i've used
`alias "core ..." = ...` to (1) define `foo` in `assert.nu` and (2)
still use the builtin `foo` with `core foo` (replace `foo` by `length`
or `str contains`)
- tests have been fixed accordingly
# User-Facing Changes
one can not use
```
use std "assert equal"
```
anymore because `assert ...` is not exported from `std`.
`std assert` is now a *real* module.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Notes for reviewers
to test this, i think the easiest is to
- run `toolkit test stdlib` and see all the tests pass
- run `cargo run -- -n` and try `use std assert` => are all the commands
available in scope?
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add "os record" support.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This don't change how path add works but just adds support for "os
records" aka records whose key are at least one of:
- linux
- macos
- windows
Check the
[test](a917f1a924/crates/nu-std/tests/test_std.nu (L31-L32))
if that's not clear enough
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
