# Description
After PR https://github.com/nushell/nushell/pull/12953, LS_COLORS
coloring broke in the `grid` and `ls` commands because the full path to
the files were not available. This PR restores the coloring.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR sets the current working directory to the location of the
Nushell executable at startup, using `std::env::set_current_dir()`. This
is desirable because after PR
https://github.com/nushell/nushell/pull/12922, we no longer change our
current working directory even after `cd` is executed, and some OS might
lock the directory where Nushell started.
The location of the Nushell executable is chosen because it cannot be
removed while Nushell is running anyways, so we don't have to worry
about OS locking it.
This PR has the side effect that it breaks buggy command even harder.
I'll keep this PR as a draft until these commands are fixed, but it
might be helpful to pull this PR if you're working on fixing one of
those bugs.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Fixesnushell/nushell#13891
# Description
`input listen` now respects `$env.config.use_kitty_protocol`
This is essentially a copy-paste from `keybindings listen` where it was
already implemented.
# User-Facing Changes
`input listen` now respects `$env.config.use_kitty_protocol`
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR updates the `folder_depth` algorithm in order to make `glob` a
bit faster. The algorithm works like this. Since `folder_depth` is
always used we need to set it to a value. If the glob pattern contains
`**` then make `folder_depth` `usize::MAX`. If `--depth` is not
provided, make it 1, otherwise use the provided value.
closes#13914
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes a couple panics:
```
> {} | inspect
Error: x Main thread panicked.
|-> at crates/nu-command/src/debug/inspect_table.rs:87:15
`-> attempt to divide by zero
```
```
> {} | explore
# see an empty column, press Down
Error: x Main thread panicked.
|-> at crates/nu-explore/src/views/cursor/mod.rs:39:9
`-> attempt to subtract with overflow
```
# User-Facing Changes
`{} | inspect` now outputs an empty table:
```
╭─────────────┬────────╮
│ description │ record │
├─────────────┴────────┤
│ │
├──────────────────────┤
```
`{} | explore` opens the help menu.
Both match the empty list behavior.
# Tests
I'm not sure how to test `explore`, as it waits for interaction.
# Description
This PR tries to allow the `ls` command to use multiple threads if so
specified. The reason why you'd want to use threads is if you notice
`ls` taking a long time. The one place I see that happening is from WSL.
I'm not sure how real-world this test is but you can see that this
simple `ls` of a folder with length takes a while 9366 ms. I've run this
test many times and it ranges from about 15 seconds to about 10 seconds.
But with the `--threads` parameter, it takes less time, 2744ms in this
screenshot.
The only way forward I could find was to _always_ use threading and
adjust the number of threads based on if the user provides a flag. That
seemed the easiest way to do it after applying @devyn's interleave
advice.
No feelings hurt if this doesn't land. It's more of an experiment but I
think it has potential.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
From [Discord
today](https://discord.com/channels/601130461678272522/729071784321876040/1286904159047778316),
`into value` isn't classified with `conversions` like the other `into
...` subcommands. I think this is correct, since it's a `table->table`
operation, so it's a filter that has the side effect of (potentially)
converting (via inference) cell values.
But we should at least have some search terms that help here, so this PR
adds *"conversion"* and *"convert"* to the command.
# User-Facing Changes
`help -f conversion` will return `into value`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Partialy addresses #13868. `try` does not catch non-zero exit code
errors from the last command in a pipeline if the result is assigned to
a variable using `let` (or `mut`).
This was fixed by adding a new `OutDest::Value` case. This is used when
the pipeline is in a "value" position. I.e., it will be collected into a
value. This ended up replacing most of the usages of `OutDest::Capture`.
So, this PR also renames `OutDest::Capture` to `OutDest::PipeSeparate`
to better fit the few remaining use cases for it.
# User-Facing Changes
Bug fix.
# Tests + Formatting
Added two tests.
# Description
Add content type metadata to the output of `view source`.
I've gone along with the mime type used [here][xdg], but this shouldn't
be merged until there is consensus #13858.
`to nuon`'s output has content type `application/x-nuon`
[xdg]:
https://gitlab.freedesktop.org/xdg/shared-mime-info/-/merge_requests/231
# User-Facing Changes
Combined with `metadata access`, allows richer display_output hooks.
Might be useful with other commands that make use of content_type like
the `http` commands.
# Description
Similar to #13870 (thanks @WindSoilder), this PR adds a boolean which
determines whether to ignore any errors from an external command. This
is in order to fix#13876. I.e., `do -p` does not wait for externals to
complete before continuing.
# User-Facing Changes
Bug fix.
# Tests + Formatting
Added a test.
# Description
Makes IR the default evaluator, in preparation to remove the non-IR
evaluator in a future release.
# User-Facing Changes
* Remove `NU_USE_IR` option
* Add `NU_DISABLE_IR` option
* IR is enabled unless `NU_DISABLE_IR` is set
# After Submitting
- [ ] release notes
# Description
This PR allows the tab character to be retained when using `find`.
### Before
### After
closes#13846
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This allows parsing of data (e.g. key-value pairs) where the last column
may contain the delimiter.
- this PR should close#13742
# Description
Adds a `--number (-n)` flag to `split column`, analogous to `split row
--number`.
```
~> ['author: Salina Yoon' r#'title: Where's Ellie?: A Hide-and-Seek Book'#] | split column --number 2 ': ' key value
╭───┬────────┬──────────────────────────────────────╮
│ # │ key │ value │
├───┼────────┼──────────────────────────────────────┤
│ 0 │ author │ Salina Yoon │
│ 1 │ title │ Where's Ellie?: A Hide-and-Seek Book │
╰───┴────────┴──────────────────────────────────────╯
```
# User-Facing Changes
* `split column` gains a `--number` option
# Tests + Formatting
Tests included in strings::split::column::test::test_examples and
commands::split_column::to_column.
# After Submitting
Reference documentation is auto-generated from code. No other
documentation updates necessary.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Related to #11693. It looks like there is no reason for Nu shell's
`clear` to behave differently than other shells' `clear`. To improve the
UX and fulfill the user expectations, the default has been adjusted to
work the same as in other shells by clearing the scrollback buffer. For
edge cases where someone depends on the current behavior of keeping the
scrollback, a `-k` option has been added.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Improve the UX of `clear` by changing the default behavior to the same
as other popular shells, i.e clear scrollback by default.
- Remove `-a --all` flag, make it the default behavior to clear the
scrollback
- Add `-k --keep-scrollback` flag for backward compat to keep the
scrollback buffer
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
This is a simple change flipping the flag and default behavior, no tests
should be needed.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- [ ] update the `clear` command docs
---------
Co-authored-by: Douglas <32344964+NotTheDr01ds@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Fixes: #13460
The issue is caused by `try_exists` method on path, it will return
`Err(NotADirectory)` if user tried to check for a path under a regular
file.
To fix it, I think it's ok to use `exists` rather than `try_exists`,
although
[Path::exists()](https://doc.rust-lang.org/std/path/struct.Path.html#method.exists)
only checks whether or not a path was both found and readable. I think
it's ok, and we can add this information under `extra_description`.
# User-Facing Changes
The following code will no longer raise error:
```
touch a; 'a/b' | path exists
```
# Tests + Formatting
Added 1 test.
# Description
Add `metadata access`, which allows accessing/inspecting the metadata of
a stream in a closure.
```nu
ls | metadata access {|meta|
...
}
```
- The metadata is provided as an argument to the closure, identical to
the record obtained with `metadata` command.
- `metadata access` passes its input stream into the closure as it is.
- Within the closure, both the metadata and the stream are available.
The closure may modify, collect or pass the stream as it is.
# Motivation
- Without this command, nu code can't act on metadata without losing the
stream, use cases requiring both the stream and metadata must be
implemented either as a built-in or a plugin.
- This command allows users to enhance presentation of data, similar to
`table` coloring the output of `ls`.
# Description
Fixes a bug in the IR for `try` to match that of the regular evaluator
(continuing from #13515):
```nushell
# without IR:
try { ^false } catch { 'caught' } # == 'caught'
# with IR:
try { ^false } catch { 'caught' } # error, non-zero exit code
```
In this PR, both now evaluate to `caught`. For the implementation, I had
to add another instruction, and feel free to suggest better
alternatives. In the future, it might be possible to get rid of this
extra instruction.
# User-Facing Changes
Bug fix, `try { ^false } catch { 'caught' }` now works in IR.
# Description
This PR makes it so that non-zero exit codes and termination by signal
are treated as a normal `ShellError`. Currently, these are silent
errors. That is, if an external command fails, then it's code block is
aborted, but the parent block can sometimes continue execution. E.g.,
see #8569 and this example:
```nushell
[1 2] | each { ^false }
```
Before this would give:
```
╭───┬──╮
│ 0 │ │
│ 1 │ │
╰───┴──╯
```
Now, this shows an error:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:2]
1 │ [1 2] | each { ^false }
· ┬
· ╰── source value
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #1:1:17]
1 │ [1 2] | each { ^false }
· ──┬──
· ╰── exited with code 1
╰────
```
This PR fixes#12874, fixes#5960, fixes#10856, and fixes#5347. This
PR also partially addresses #10633 and #10624 (only the last command of
a pipeline is currently checked). It looks like #8569 is already fixed,
but this PR will make sure it is definitely fixed (fixes#8569).
# User-Facing Changes
- Non-zero exit codes and termination by signal now cause an error to be
thrown.
- The error record value passed to a `catch` block may now have an
`exit_code` column containing the integer exit code if the error was due
to an external command.
- Adds new config values, `display_errors.exit_code` and
`display_errors.termination_signal`, which determine whether an error
message should be printed in the respective error cases. For
non-interactive sessions, these are set to `true`, and for interactive
sessions `display_errors.exit_code` is false (via the default config).
# Tests
Added a few tests.
# After Submitting
- Update docs and book.
- Future work:
- Error if other external commands besides the last in a pipeline exit
with a non-zero exit code. Then, deprecate `do -c` since this will be
the default behavior everywhere.
- Add a better mechanism for exit codes and deprecate
`$env.LAST_EXIT_CODE` (it's buggy).
# Description
The content-type was not being handled appropriately when sending
requests with a string value.
# User-Facing Changes
- Passing a string value through a pipeline with a content-type set as
metadata is handled correctly
- Passing a string value as a parameter with a content-type set as a
flag is handled correctly.
# Description
After looking at #13751 I noticed that the config setting
`use_grid_icons` seems out of place. So, I removed it from the config
and made it a parameter to the `grid` command.
# Description
The existing code uses exact matches on content type. This can caused
things like "application/json; charset=utf-8" that contain a charset not
using send_json method.
NOTE: The charset portion in the above example would still be ignored as
we rely on serde and the client library to control the encoding, it is
still better to catch the json case.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
Cleans up and refactors the config code using the `IntoValue` macro.
Shoutout to @cptpiepmatz for making the macro!
# User-Facing Changes
Should be none.
# After Submitting
Somehow refactor the reverse transformation.
Closes#13687Closes#13686
# Description
Light refactoring of `send_request `in `client.rs`. In the end there are
more lines but now the logic is more concise and facilitates adding new
conditions in the future. Unit tests ran fine and I tested a few cases
manually.
Cool project btw, I'll be using nushell from now on.
# Description
This pr addresses the comment:
https://github.com/nushell/nushell/issues/11791#issuecomment-2308384155
It's caused by if the last row have a very different format to the first
row, the value of `end_char` will exceed the `line_char_boundaries`.
Adding a guard for it should avoid such panic.
# User-Facing Changes
The following code should no longer panic:
```shell
"nu_plugin_highlight = '1.2.2+0.97.1' # A nushell plugin for syntax highlighting
trace_nu_plugin = '0.3.1' # A wrapper to trace Nu plugins
nu_plugin_bash_env = '0.13.0' # Nu plugin bash-env
nu_plugin_from_sse = '0.4.0' # Nushell plugin to convert a HTTP server sent event stream to structured data
... and 90 crates more (use --limit N to see more)" | detect columns -n --guess
```
# Tests + Formatting
Added 1 test.
# Description
This changes the behavior of `tee` to be more transparent when given a
value that isn't a list or range. Previously, anything that wasn't a
byte stream would converted to a list stream using the iterator
implementation, which led to some surprising results. Instead, now, if
the value is a string or binary, it will be treated the same way a byte
stream is, and the output of `tee` is a byte stream instead of the
original value. This is done so that we can synchronize with the other
thread on collect, and potentially capture any error produced by the
closure.
For values that can't be converted to streams, the closure is just run
with a clone of the value instead on another thread. Because we can't
wait for the other thread, there is no way to send an error back to the
original thread, so instead it's just written to stderr using
`report_error_new()`.
There are a couple of follow up edge cases I see where byte streams
aren't necessarily treated exactly the same way strings are, but this
should mostly be a good experience.
Fixes#13489.
# User-Facing Changes
Breaking change.
- `tee` now outputs and sends string/binary stream for string/binary
input.
- `tee` now outputs and sends the original value for any other input
other than lists/ranges.
# Tests + Formatting
Added for new behavior.
# After Submitting
- [ ] release notes: breaking change, command change
# Description
`cargo` somewhat recently gained the capability to store `lints`
settings for the crate and workspace, that can override the defaults
from `rustc` and `clippy` lints. This means we can enforce some lints
without having to actively pass them to clippy via `cargo clippy -- -W
...`. So users just forking the repo have an easier time to follow
similar requirements like our CI.
## Limitation
An exception that remains is that those lints apply to both the primary
code base and the tests. Thus we can't include e.g. `unwrap_used`
without generating noise in the tests. Here the setup in the CI remains
the most helpful.
## Included lints
- Add `clippy::unchecked_duration_subtraction` (added by #12549)
# User-Facing Changes
Running `cargo clippy --workspace` should be closer to the CI. This has
benefits for editor configured runs of clippy and saves you from having
to use `toolkit` to be close to CI in more cases.
this PR should close#12168
# Description
Add `split cell-path`, inverse of `into cell-path`.
# User-Facing Changes
Currently there is no way to make use of cell-path values as a user,
other than passing them to builtin commands. This PR makes more use
cases possible.
# Description
Closes#13677
Remove the command `str deunicode`, as it has a narrow application, is
loosely defined by the data provided by the `deunicode` crate and thus a
stabilization liability post-1.0.
Furthermore the data to perform the look-up is quite substantial.
Removing the command and the `deunicode` dependency saves 0.9 MB of
binary data in release mode (~ 2% of total)
(checked via `cargo bloat --release` for a linux x86 build)
# User-Facing Changes
The `str deunicode` command recently added in #13270 is gone
Mistakes have been made. I forgot about a bunch of `todo`s in the helper
functions. So, this PR replaces them with proper errors. It also adds
tests for parse-time evaluation, because one `todo` I missed was in a
`run_const` function.
Hi there
Here I am using latest tabled.
My tests shows it does fixes panics, but I am wanna be sure.
@fdncred could you verify that it does fixes those panics/errors?
Closes#13405Closes#12786
Based on the discussion in #13419.
## Description
Reworks the `decode`/`encode` commands by adding/changing the following
bases:
- `base32`
- `base32hex`
- `hex`
- `new-base64`
The `hex` base is compatible with the previous version of `hex` out of
the box (it only adds more flags). `base64` isn't, so the PR adds a new
version and deprecates the old one.
All commands have `string -> binary` signature for decoding and `string
| binary -> string` signature for encoding. A few `base64` encodings,
which are not a part of the
[RFC4648](https://datatracker.ietf.org/doc/html/rfc4648#section-6), have
been dropped.
## Example usage
```Nushell
~/fork/nushell> "string" | encode base32 | decode base32 | decode
string
```
```Nushell
~/fork/nushell> "ORSXG5A=" | decode base32
# `decode` always returns a binary value
Length: 4 (0x4) bytes | printable whitespace ascii_other non_ascii
00000000: 74 65 73 74 test
```
## User-Facing Changes
- New commands: `encode/decode base32/base32hex`.
- `encode hex` gets a `--lower` flag.
- `encode/decode base64` deprecated in favor of `encode/decode
new-base64`.
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
The previous behaviour of `into record` on lists was to create a new
record with each list index as the key. This was not very useful for
creating meaningful records, though, and most people would end up using
commands like `headers` or `transpose` to turn a list of keys and values
into a record.
This PR changes that instead to do what I think the most ergonomic thing
is, and instead:
- A list of records is merged into one record.
- A list of pairs (two element lists) is folded into a record with the
first element of each pair being the key, and the second being the
value.
The former is just generally more useful than having to use `reduce`
with `merge` for such a common operation, and the latter is useful
because it means that `$a | zip $b | into record` *just works* in the
way that seems most obvious.
Example:
```nushell
[[foo bar] [baz quux]] | into record # => {foo: bar, baz: quux}
[{foo: bar} {baz: quux}] | into record # => {foo: bar, baz: quux}
[foo baz] | zip [bar quux] | into record # => {foo: bar, baz: quux}
```
The support for range input has been removed, as it would no longer
reflect the treatment of an equivalent list.
The following is equivalent to the old behavior, in case that's desired:
```
0.. | zip [a b c] | into record # => {0: a, 1: b, 2: c}
```
# User-Facing Changes
- `into record` changed as described above (breaking)
- `into record` no longer supports range input (breaking)
# Tests + Formatting
Examples changed to match, everything works. Some usage in stdlib and
`nu_plugin_nu_example` had to be changed.
# After Submitting
- [ ] release notes (commands, breaking change)
Fixesnushell/nushell#8723
# Description
The example was showing the flag that no longer exists.
# User-Facing Changes
Help no longer shows the example with `-d` flag.
# Tests + Formatting
I trust in CI.
# After Submitting
Nothing.
Fixesnushell/nushell#7995
# Description
This dependency is no longer used by nushell itself.
# User-Facing Changes
None.
# Tests + Formatting
Pased.
# After Submitting
None.
# Description
Prefer process name over executable path. This in practice causes the
`name` column to use just the base executable name.
Also set start_time to nothing on error, because why not.
# User-Facing Changes
Before:
> /opt/google/chrome/chrome
After:
> chrome
Also picks up changes due to `echo test-proc > /proc/$$/comm`.
# Tests + Formatting
No new coverage.
