* Updated nu_with_plugins to handle new nushell
- Now it requires the plugin format and name to be passed in, because
we can't really guess the format
- It calls `register` with format and plugin path
- It creates a temporary folder and in it an empty temporary plugin.nu
so that the tests don't conflict with each other or with local copy of
plugin.nu
- Instead of passing the commands via stdin it passes them via the new
--commands command line argument
* Rename path to command for clarity
* Enable core_inc tests
Remove deprecated inc feature and replace with new plugin feature
* Update core_inc tests for new nu_with_plugins syntax
* Rework core_inc::can_only_apply_one
The new inc plugin doesn't error if passed more than one but instead
chooses the highest increment
* Gate all plugin tests behind feature = "plugin" instead of one by one
* Remove format!-like behavior from nu_with_plugins
nu_with_plugins had format!-like behavior where it would allow calls
such as this:
```rs
nu_with_plugins!(
cwd: "dir/",
"open {} | get {}",
"Cargo.toml",
"package.version"
)
```
And although nifty it seems to have never been used before and the same
can be achieved with a format! like so:
```rs
nu_with_plugins!(
cwd: "dir/",
format!("open {} | get {}", "Cargo.toml", "package.version")
)
```
So I am removing it to keep the complexity of the macro in check
* Add multi-plugin support to nu_with_plugins
Useful for testing interactions between plugins
* Alternative 1: run `cargo build` inside of tests
* Handle Windows by canonicalizing paths and add .exe
One VM install later and lots of learning about how command line
arguments work and here we are
* cp with no dangling link
* add -p to not follow symbolic link
* change comment
* add one more test case to check symblink body after copied
* better help message
* Try removing debuginfo for ci builds
* oops, wrong inherits
* extra flag
* nextest doesn't support --profile in the same way
* try to allow for a ci-specific target
* Oops, run more tests
* nu-cli: added tests for file completions
* test adding extra sort
* Feature/refactor completion options (#5228)
* Copy completion filter to custom completions
* Remove filter function from completer
This function was a no-op for FileCompletion and CommandCompletion.
Flag- and VariableCompletion just filters with `starts_with` which
happens in both completers anyway and should therefore also be a no-op.
The remaining use case in CustomCompletion was moved into the
CustomCompletion source file.
Filtering should probably happen immediately while fetching completions
to avoid unnecessary memory allocations.
* Add get_sort_by() to Completer trait
* Remove CompletionOptions from Completer::fetch()
* Fix clippy lints
* Apply Completer changes to DotNuCompletion
* add os to $nu based on rust's understanding (#5243)
* add os to $nu based on rust's understanding
* add a few more constants
Co-authored-by: Richard <Tropid@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Fix failing pipeline()
The `skip(1)` was there likely to remove the welcome message.
* Fix typo
* Fix nu! test macro to enter cwd correctly
Nushell's current working directory is determined primarily by the PWD
environment variable.
* Resolve rebase artifacts
* Remove leftover dependencies on removed feature
* Remove unnecessary 'pub'
* Start taking notes and fooling around
* Split canonicalize to two versions; Add TODOs
One that takes `relative_to` and one that doesn't.
More TODO notes.
* Merge absolutize to and rename resolve_dots
* Add custom absolutize fn and use it in path expand
* Convert a couple of dunce::canonicalize to ours
* Update nu-path description
* Replace all canonicalize with nu-path version
* Remove leftover dunce dependencies
* Fix broken autocd with trailing slash
Trailing slash is preserved *only* in paths that do not contain "." or
"..". This should be fixed in the future to cover all paths but for now
it at least covers basic cases.
* Use dunce::canonicalize for canonicalizing
* Alow cd recovery from non-existent cwd
* Disable removed canonicalize functionality tests
Remove unused import
* Break down nu-path into separate modules
* Remove unused public imports
* Remove abundant cow mapping
* Fix clippy warning
* Reformulate old canonicalize tests to expand_path
They wouldn't work with the new canonicalize.
* Canonicalize also ~ and ndots; Unify path joining
Also, add doc comments in nu_path::expansions.
* Add comment
* Avoid expanding ndots if path is not valid UTF-8
With this change, no lossy path->string conversion should happen in the
nu-path crate.
* Fmt
* Slight expand_tilde refactor; Add doc comments
* Start nu-path integration tests
* Add tests TODO
* Fix docstring typo
* Fix some doc strings
* Add README for nu-path crate
* Add a couple of canonicalize tests
* Add nu-path integration tests
* Add trim trailing slashes tests
* Update nu-path dependency
* Remove unused import
* Regenerate lockfile
* Fix swapped PATH env var separators
* Support pathvar to manipulate other vars than PATH
* Add tests for pathvar and its subcommands
* Fix PATH env name for Windows
Seems like Windows uses PATH as well.
Co-authored-by: Jakub Žádník <jakub.zadnik@tuni.fi>
* Use ctx.configs in all config commands
* Remove all setting/accessing of vars.("config-path")
* Add tests
* Add comment
* Reload cfg on remove
* Hypocratic ws change
* Use history_path in hist_or_default
* Make clippy happy
* Fix rebase stuff
* Fix clippy lint
Improvements overall to Nu. Also among the changes here, we can also be more confident towards incorporating `3041`. End to end tests for checking envs properly exported to externals is not added here (since it's in the other PR)
A few things added in this PR (probably forgetting some too)
* no writes happen to history during test runs.
* environment syncing end to end coverage added.
* clean up / refactorings few areas.
* testing API for finer control (can write tests passing more than one pipeline)
* can pass environment variables in tests that nu will inherit when running.
* No longer needed.
* no longer under a module. No need to use super.
* Playground infraestructure (tests, etc) additions.
A few things to note:
* Nu can be started with a custom configuration file (`nu --config-file /path/to/sample_config.toml`). Useful for mocking the configuration on test runs.
* When given a custom configuration file Nu will save any changes to the file supplied appropiately.
* The `$nu.config-path` variable either shows the default configuration file (or the custom one, if given)
* We can now run end to end tests with finer grained control (currently, since this is baseline work, standard out) This will allow to check things like exit status, assert the contents with a format, etc)
* Remove (for another PR)
The autoenv logic mutates environment variables in the running session as
it operates and decides what to do for trusted directories containing `.nu-env`
files. Few of the ways to interact with it were all in a single test function.
We separate out all the ways that were done in the single test function to document
it better. This will greatly help once we start refactoring our way out from setting
environment variables this way to just setting them to `Scope`.
This is part of an on-going effort to keep variables (`PATH` and `ENV`)
in our `Scope` and rely on it for everything related to variables.
We expect to move away from setting (`std::*`) envrironment variables in the current
running process. This is non-trivial since we need to handle cases from vars
coming in from the outside world, prioritize, and also compare to the ones
we have both stored in memory and in configuration files.
Also to send out our in-memory (in `Scope`) variables properly to external
programs once we no longer rely on `std::env` vars from the running process.
* updated & added date related commands based on the new design
* added proper error handling when date format string is invalid
* fixed format issue
* fixed an issue caused due to the change in primitive Date type
* added `date list-timezone` command to list all supported time zones and updated `date to-timezone` accordingly
Continuing on anchoring and improvements on Nu's overall internal commands (#2635).
`move column` sub command has been turned into the command `move` since
we use it to move exclusively columns. Examples added as well.
Fixed it to carry along any anchor locations that might be in place if
table to be moved originates from other sources.
Nu has many commands that allow the nuño to customize behavior such
as UI and behavior. Today, coloring can be customized, the line editor,
and other things. The more options there are, the higher the complexity
in managing them.
To mitigate this Nu can store configuration options as nested properties.
But to add and edit them can be taxing. With column path support we can
work with them easier.
We introduce the `plugin` nu sub command (`nu plugin`) with basic plugin
loading support. We can choose to load plugins from a directory. Originally
introduced to make integration tests faster (by not loading any plugins on startup at all)
but `nu plugin --load some_path ; test_pipeline_that_uses_plugins_just_loaded` does not see it.
Therefore, a `nu_with_plugins!` macro for tests was introduced on top of nu`s `--skip-plugins`
switch executable which is set to true when running the integration tests that use the `nu!` macro now..
* Working towards a PoC for wasm
* Move bson and sqlite to plugins
* proof of concept now working
* tests are green
* Add CI test for --no-default-features
* Fix some tests
* Fix clippy and windows build
* More fixes
* Fix the windows build
* Fix the windows test
* fix: absolutize path against its parent if it was a symlink.
On Linux this happens because Rust calls readlink but doesn't canonicalize the resultant path.
* feat: playground function to create symlinks
* fix: use playground dirs
* feat: test for #1631, shift tests names
