this closes#10248
@fdncred pointed out the problem and he was correct 😄
I went ahead and made the simple change and the
https://github.com/influxdata/influxdb_iox binary
works like a charm...
@amtoine hopefully there are no issues with this change
I believe its a good one as other rust binaries might take advantage of
this common
environment variable as well...
should close https://github.com/nushell/nushell/issues/10237
# Description
this is @fdncred's findings 😋
i just made the PR 😌
# User-Facing Changes
```nushell
[a b] | where $it == 'c' | last | default 'd'
```
now works and gives `d`
# Tests + Formatting
adds a new `default_after_empty_filter` test.
# After Submitting
# Description
we talked about this before in some meetings so i thought, why not?
the hope is that these constants do not require Rust code to be
implemented and that this move will make the Rust source base a bit
smaller 🤞
# User-Facing Changes
mathematical constants (e, pi, tau, phi and gamma) are now in `std math`
rather than `math`
## what can be done
```nushell
> use std; $std.math
> use std math; $math
> use std *; $math
```
will all give
```
╭───────┬────────────────────╮
│ GAMMA │ 0.5772156649015329 │
│ E │ 2.718281828459045 │
│ PI │ 3.141592653589793 │
│ TAU │ 6.283185307179586 │
│ PHI │ 1.618033988749895 │
╰───────┴────────────────────╯
```
and the following will work too
```nushell
> use std math E; $E
2.718281828459045
```
```nushell
> use std math *; $GAMMA
0.5772156649015329
```
## what can NOT be done
looks like every export works fine now 😌
# Tests + Formatting
# After Submitting
# Description
Closes: #10218
I think this is `sleep`'s specific issue, it's because it always return
a `Value::nothing` where it's interrupted by `ctrl-c`.
To fix the issue, I'd propose to make it returns Err(ShellError)
This is how it behaves:
```nushell
❯ sleep 5sec; echo "hello!"
^CError: nu:🐚:sleep_breaked
× Sleep is breaked.
❯ sleep 5sec; ^echo "hello!"
^CError: nu:🐚:sleep_breaked
× Sleep is breaked.
```
# User-Facing Changes
None
# Tests + Formatting
# After Submitting
# Description
Currently on Android, there are warnings about unused variables. This PR
fixes that with more conditional guards for the unused variables.
Additionally, in #10013, @kubouch gave feedback in [the last
PR](https://github.com/nushell/nushell/pull/10013#pullrequestreview-1596828128)
that it was unwieldy to repeat
```rust
#[cfg(all(
feature = "trash-support",
not(target_os = "android"),
not(target_os = "ios")
))]
```
# Description
* The path to the binaries for tests is slightly incorrect. It is
missing the build target when it is set with the `CARGO_BUILD_TARGET`
environment variable. For example, when `CARGO_BUILD_TARGET` is set to
`aarch64-linux-android`, the path to the `nu` binary is:
`./target/aarch64-linux-android/debug/nu`
rather than
`./target/debug/nu`
This is common on Termux since the default target that rustc detects can
cause problems on some projects, such as [python's `cryptography`
package](https://github.com/pyca/cryptography/issues/7248).
This technically isn't a problem specific to Android, but is more likely
to happen on Android due to the latter.
* Additionally, the existing variable named `NUSHELL_CARGO_TARGET` is in
fact the profile, not the build target, so this was renamed to
`NUSHELL_CARGO_PROFILE`. This change is included because without the
rename, the build system would be using `CARGO_BUILD_TARGET` for the
build target and `NUSHELL_CARGO_TARGET` for the build profile, which is
confusing.
* `std path add` tests were missing `android` test
# User-Facing Changes
For those who would like to build nushell on Termux, the unit tests will
pass now.
# Description
This PR makes `append`/`prepend` more consistent, in particular, it allows you to
work with ranges. Previously, you couldn't append a list by range:
```nu
> 0..1 | append 2..4
╭──────╮
│ 0 │
│ 1 │
│ 2..4 │
╰──────╯
```
Now it works:
```nu
> 0..1 | append 2..4
╭───╮
│ 0 │
│ 1 │
│ 2 │
│ 3 │
│ 4 │
╰───╯
```
# User-Facing Changes
If someone needs the old behavior, then it can be obtained like this:
```nu
> 0..1 | append [2..4]
╭──────╮
│ 0 │
│ 1 │
│ 2..4 │
╰──────╯
```
the example for `history` was out of date, this PR updates it.
## the failing command
```
❯ history | wrap cmd | where cmd =~ cargo
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #23:1:1]
1 │ history | wrap cmd | where cmd =~ cargo
· ───┬─── ─┬ ──┬──
· │ │ ╰── string
· │ ╰── type mismatch for operator
· ╰── record<start_timestamp: string, command: string, cwd: string, duration: duration, exit_status: int>
╰────
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
rustfmt 1.6.0 has added support for formatting [let-else
statements](https://doc.rust-lang.org/rust-by-example/flow_control/let_else.html)
See https://github.com/rust-lang/rustfmt/blob/master/CHANGELOG.md#added
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fix https://github.com/nushell/nushell/issues/10136
# Description
Current nushell only handle path containing '*' as match pattern and
treat '?' as just normal path.
This pr makes path containing '?' is also processed as pattern.
🔴 **Concerns: Need to design/comfirm a consistent rule to handle
dirs/files with '?' in their names.**
Currently:
- if no dir has exactly same name with pattern, it will print the list
of matched directories
- if pattern exactly matches an empty dir's name, it will just print the
empty dir's content ( i.e. `[]`)
- if pattern exactly matches an dir's name, it will perform pattern
match and print all the dir contains
e.g.
```bash
mkdir src
ls s?c
```
| name | type | size | modified |
| ---- | ---- | ------ | --------------------------------------------- |
| src | dir | 1.1 KB | Tue, 29 Aug 2023 07:39:41 +0900 (9 hours ago) |
-----------
```bash
mkdir src
mkdir scc
mkdir scs
ls s?c
```
| name | type | size | modified |
| ---- | ---- | ------ |
------------------------------------------------ |
| scc | dir | 64 B | Tue, 29 Aug 2023 16:55:31 +0900 (14 seconds ago) |
| src | dir | 1.1 KB | Tue, 29 Aug 2023 07:39:41 +0900 (9 hours ago) |
-----------
```bash
mkdir s?c
ls s?c
```
print empty (i.e. ls of dir `s?c`)
-----------
```bash
mkdir -p s?c/test
ls s?c
```
|name|type|size|modified|
|-|-|-|-|
|s?c/test|dir|64 B|Tue, 29 Aug 2023 16:47:53 +0900 (2 minutes ago)|
|src/bytes|dir|480 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
|src/charting|dir|160 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
|src/conversions|dir|160 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
-----------
# User-Facing Changes
User will be able to use '?' to match directory/file.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
None
---------
Co-authored-by: Horasal <horsal@horsal.dev>
# Description
This updates most crates to 0.27 `crossterm`.
To do so we need the most recent `ratatui`
`reedline` can now update as well.
See https://github.com/nushell/reedline/pull/625
Sadly this introduces some crate duplication again as there are some
other dependency updates.
Furthermore we have another crate depending on 0.26.1 crossterm
(`comfy-table` that some how gets pulled in by polars)
# User-Facing Changes
2 additional mouse events detected by `input listen`
# Tests + Formatting
None
should close https://github.com/nushell/nushell/issues/7202
# Description
i have been annoyed enough by this missing feature, so let's add that to
Nushell without requiring any user configuration 😏
# User-Facing Changes
this PR should allow tab completion cycling everytime, without requiring
the user to use the default config files or add the following
keybindings to their config
```nushell
{
name: completion_menu
modifier: none
keycode: tab
mode: [emacs vi_normal vi_insert]
event: {
until: [
{ send: menu name: completion_menu }
{ send: menunext }
{ edit: complete }
]
}
}
```
### 🧪 try it out
from the root of the repo, one can try `<tab>` in each of the following
cases:
- `cargo run -- -n` to load Nushell without any config
- `cargo run -- --config
crates/nu-utils/src/sample_config/default_config.nu --env-config
crates/nu-utils/src/sample_config/default_env.nu` to load the default
configuration
- `cargo run` to load the user configuration
## before
- `<tab>`, `ls <tab>` and `str <tab>` only work with the second `cargo
run`, i.e. when loading the default config files
## after
- `<tab>` should cycle through the available commands
- `ls <tab>` should cycle through the available files and directories
- `str <tab>` should cycle the subcommands of `str`
in all three cases
# Tests + Formatting
# After submitting
# Description
This PR adds the ability to have a `$nu.plugin-path` even when you
plugins are registered and it also should work with `nu -n --no-stdlib`.
### Before
It would give an error
```
│ plugin-path │ IOError("Could not get plugin signature location") │
```
### After
It returns the proper path, like this for me
```
│ plugin-path │ /Users/fdncred/Library/Application Support/nushell/plugin.nu │
```
Closed#10198
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
As part of the refactor to split spans off of Value, this moves to using
helper functions to create values, and using `.span()` instead of
matching span out of Value directly.
Hoping to get a few more helping hands to finish this, as there are a
lot of commands to update :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <windsoilder@outlook.com>
close#8074
I attempted to refactor the "input" command. The reason for this is that
the current implementation of the "input" command lacks consistency for
different options. For instance, some parts use `std::io::stdin` while
others use `crossterm::event::read`.
In this pull request, I have made changes to use crossterm consistently:
- Detection of the -u option is now done using `crossterm`'s
`KeyCode::Char`.
- The current input is displayed when using `crossterm` for input (it
won't be displayed when -s is present).
- Ctrl-C triggers SIGINT.
# User-Facing Changes
Users can interrupt "input" with ctrl-c.
# Description
Changed the default env file so that home is found using `$nu.home-path`
instead to using an if-else statement to find the os then find the
specific environment variable
They relied on the `nu_plugin_inc` but where behind a feature flag that
isn't actually defined anywhere. These tests of `update` or `upsert`
shouldn't really depend on `inc` so I decided to remove them outright as
they haven't been used to exercise the commands under test.
As described in Issue #8670, removed `pipeline()` wherever its argument
contained no line breaks.
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
Same logic as in #9971
Prevents building the heavy polars and arrow dependencies when just
running `cargo test --workspace` or `rust-analyzer`
`polars-io` dependency was introduced in #10019
- this PR should close#10132
# Description
* added a flag to `from csv --ascii` that replaces the given `separator
with the unicode separator x1f https://www.codetable.net/hex/1f (aka
Information Separator One)
# User-Facing Changes
New flags are available for `from csv` ( `--ascii` or short `-a`)
# Tests + Formatting
There are no tests at the moment. Code has been formatted.
- `cargo test --workspace` (breaks with a non related test on my
machine)
# Description
This PR updates one of the query web examples because the wikipedia page
changed. This works again.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This addresses the warnings generated from using DateTime::from_utc.
DateTime::from_utc was deprecated as of chrono 0.4.27
Co-authored-by: Jack Wright <jack.wright@disqo.com>
This pr
- fixes https://github.com/nushell/nushell/issues/10143
- fixes https://github.com/nushell/nushell/issues/5559
# Description
Current `lite_parse` does not handle multiple line comments and eols in
pipeline.
When parsing the following tokens:
| `"abcdefg"` | ` \|` | `# foobar` | ` \n` | `split chars` |
| ------------- | ------------- |------------- |-------------
|------------- |
| [Command] | [Pipe] | [Comment] | [Eol] | [Command] |
| | | Last Token |Current Token | |
`TokenContent::Eol` handler only checks if `last_token` is `Pipe` but it
will be broken if there exist any other thing, e.g. extra `[Comment]` in
this example.
This pr make the following change:
- While parsing `[Eol]`, try to find the last non-comment token as
`last_token`
- Comment is supposed as `[Comment]+` or `([Comment] [Eol])+`
- `[Eol]+` is still parsed just like current nu (i.e. generates
`nothing`).
Notice that this pr is just a quick patch if more comment/eol related
issue occures, `lite_parser` may need a rewrite.
# User-Facing Changes
Now the following pipeline works:
```bash
1 | # comment
each { |it| $it + 2 } | # comment
math sum
```
Comment will not end the pipeline in interactive mode:
```bash
❯ 1 | # comment (now enter multiple line mode instead of end)
▶▶ # foo
▶▶ 2
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
None
---------
Co-authored-by: Horasal <horsal@horsal.dev>
Polars and SQLParser upgrade.
I have exposed features that have been added to polars as command args
where appropriate.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
I moved hook to *nu_cmd_base* instead of *nu_cli* because it will enable
other developers to continue to use hook even if they decide to write
their on cli or NOT depend on nu-cli
Then they will still have the hook functionality because they can
include nu-cmd-base
- fixes#10083
# Description
nushell crashes in the following 2 condition:
- `let a = {}` , then delete `{`
- `let a = | {}`, then delete `{`
When delete `{` the pipeline becomes empty but current `nu-parser`
assume they are non-empty. This pr adds extra empty check to avoid
crash.
Co-authored-by: Horasal <horsal@horsal.dev>
# Description
This PR names the hooks as they're executing so that you can see them
with debug statements. So, at the beginning of `eval_hook()` you could
put a dbg! or eprintln! to see what hook was executing. It also shows up
in View files.
### Before - notice item 14 and 25
### After - The hooks are now named (14 & 25)
Curiosity, on my mac, the display_output hook fires 3 times before
anything else. Also, curious is that the value if the display_output, is
not what I have in my config but what is in the default_config. So,
there may be a bug or some shenanigans going on somewhere with hooks.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- Hopefully closes#10120
# Description
This PR adds a new config item, `error_style`. It will render errors in
a screen reader friendly mode when set to `"simple"`. This is done using
`miette`'s own `NarratableReportHandler`, which seamlessly replaces the
default one when needed.
Before:
```
Error: nu:🐚:external_command
× External command failed
╭─[entry #2:1:1]
1 │ doesnt exist
· ───┬──
· ╰── executable was not found
╰────
help: No such file or directory (os error 2)
```
After:
```
Error: External command failed
Diagnostic severity: error
Begin snippet for entry #4 starting at line 1, column 1
snippet line 1: doesnt exist
label at line 1, columns 1 to 6: executable was not found
diagnostic help: No such file or directory (os error 2)
diagnostic code: nu:🐚:external_command
```
## Things to be determined
- ~Review naming. `errors.style` is not _that_ consistent with the rest
of the code. Menus use a `style` record, but table rendering mode is set
via `mode`.~ As it's a single config, we're using `error_style` for now.
- Should this kind of setting be toggable with one single parameter?
`accessibility.no_decorations` or similar, which would adjust the style
of both errors and tables accordingly.
# User-Facing Changes
No changes by default, errors will be rendered differently if
`error_style` is set to `simple`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
There's a PR updating the docs over here
https://github.com/nushell/nushell.github.io/pull/1026
related to
- https://github.com/nushell/nushell/issues/7819
# Description
this PR does not quite address
https://github.com/nushell/nushell/issues/7819 because it does not
implement configurable keybindings for `explore` but rather only adds
support for Vim-like motions *out of the box*.
# User-Facing Changes
in *view* and *cursor* modes,
- `h`, `j`, `k` and `l` give standard Qwerty-based Vim motions
- `g` and `G` go to the top and the end respectively
- `u` and `d` scroll up and down
> **Note**
> the bindings do not support the use of modifiers for now, so it's not
`c-u` and `c-d` which scroll pages but rather `u` and `d`
# Tests + Formatting
# After Submitting
# Description
This PR tries to remove ~atty~ is-terminal from the entire code base,
since ~[atty is
unmaintained](https://rustsec.org/advisories/RUSTSEC-2021-0145) and~
[`is_terminal` has been
stabilized](https://blog.rust-lang.org/2023/06/01/Rust-1.70.0.html#isterminal)
in rust 1.70.0.
cc @fdncred
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
`chrono` crate enables `oldtime` feature by default, which has a
vulnerability (https://rustsec.org/advisories/RUSTSEC-2020-0071). This
PR tries to remove `time` v0.1.45 completely from nu and add an audit CI
to check for security vulnerabilities.
✋ Wait for the following PRs:
- [x] https://github.com/nushell/reedline/pull/599
- [x] https://github.com/bspeice/dtparse/pull/44
- [x] https://github.com/Byron/trash-rs/pull/75
- [x] https://gitlab.com/imp/chrono-humanize-rs/-/merge_requests/15
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
Allow `decode` command to guess the encoding of input if no encoding
name is given.
# User-Facing Changes
* `decode` now has an optional parameter instead of required one. User
can just run `decode` to let the command automatically detect encoding
and convert it to utf-8.
<img width="575" alt="Example"
src="https://github.com/nushell/nushell/assets/1991933/03a0ba11-910e-4db9-89aa-79cfec06893f">
* Based on the detect result, user may have to give a encoding name
<img width="572" alt="Error Sample1"
src="https://github.com/nushell/nushell/assets/1991933/f21fda85-1f04-4cb3-9feb-cb9fb7dcee07">
or get informed that the input is not supported by `decode`
<img width="568" alt="Error Sample2"
src="https://github.com/nushell/nushell/assets/1991933/dd3cc4c0-f119-493e-8609-d07594fc055a">
# Tests + Formatting
* `cargo fmt --all -- --check` : OK
* `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err`: OK
* `cargo test --workspace` : OK
* `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"`: OK
# After Submitting
[Command document](https://www.nushell.sh/commands/docs/decode.html) is
auto-generated and requires no action.
---------
Co-authored-by: Horasal <horsal@horsal.dev>
# Description
Many systems like Hadoops HDFS store parquet files with the short
variant `.parq`. It is quite annoying to rename these file before
opening them with nushell. This PR lets nushell accept .parq alongside
.parquet file endings.
# User-Facing Changes
Not sure if this is applicable here.
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes) - ✔️
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style - ✔️
- `cargo test --workspace` to check that all tests pass - ❌ (fails on
none related test)
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library -
✔️
# Description
This doesn't really do much that the user could see, but it helps get us
ready to do the steps of the refactor to split the span off of Value, so
that values can be spanless. This allows us to have top-level values
that can hold both a Value and a Span, without requiring that all values
have them.
We expect to see significant memory reduction by removing so many
unnecessary spans from values. For example, a table of 100,000 rows and
5 columns would have a savings of ~8megs in just spans that are almost
always duplicated.
# User-Facing Changes
Nothing yet
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
