# Description
Closes#10537. Basically error message was unhelpful, and this temporary
measure adds back the nice previous nushell error message. Ideally, we
would like to add a more permanent solution mentioned in the issue
[comments](https://github.com/nushell/nushell/issues/10537#issuecomment-1743686122),
but since we want to have `ucp` as `cp` on new release, this is hackier
but way simpler so this fix should do it.
Only downside is that now behavior differs from `uutils` in the sense
that:
```
uutils:
> cp a foo/ bar
ls bar
# foo/a
nushell:
>ucp a foo/ bar
# directory error (not copied) ....
```
So, since its non fatal error, uutils copies a, but nushell errors out
with nothing copied. If we go to option 3 mentioned above, then we can
decide what we want to do, and perhaps continue on a non fatal error.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
Implemented URL decoding as a url subcommand, created corresponding unit
tests. The logic, examples and descriptions were based on the existing
`url encode` command.
Resolves#10563
# Description
Added a new `url decode` command to compliment the existing `url
encode`, as proposed by myself in #10563.
It takes a string, list of strings or cell path and produces the
corresponding decoded strings.
# User-Facing Changes
New url subcommand `url decode`, as described above.
# Tests + Formatting
I've added unit tests for the new subcommand and ensured all actions
outlined below showed no issues.
- [x] `cargo fmt --all -- --check`
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
- [x] `cargo test --workspace`
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"`
Reverts nushell/nushell#10596
Using the long option in examples is going to be confusing as it makes
the reader think the long option is required. It also isn't idiomatic
Nushell.
The examples should be copy-paste-able as idiomatic Nushell, so as such
we shouldn't expand them to the long flag name.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Long options are preferable over short ones for documentation.
This PR ports some command examples to exclusively use long options.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
✅
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
When referring to the type use `int` consistently. Only when referring
to the concept of integer numbers use `integer`.
- Fix `random integer` to `random int` tests
- Forgot in #10520
- Use int instead of integer in error messages
- Use int type name in bits commands
- Fix messages in `for` examples
- Use int typename in `into` commands
- Use int typename in rest of commands
- Report errors in `nu-protocol` with int typename
Work for #10332
# User-Facing Changes
User errorrs should now use `int` so you can easily find the necessary
commands or type annotations.
# Tests + Formatting
Only two tests found that needed updating
# Description
This removes the old style "cd with abbreviations" that would attempt to
guess what directory you wanted to `cd` to. This would sometimes have
false positives, so we left it off by default in the config.
In the current main, we have much-improved path completions
(https://github.com/nushell/nushell/pull/10543) so you can now do `cd
a/b<tab>` and get a much better experience (because you can see the
directory you're about to cd to). This removes the need for the previous
abbreviation system.
# User-Facing Changes
This does remove the old abbreviation system. It will likely mean that
old config files that have settings for abbreviations will now get
errors.
update: here's an example of the error you'll see:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds a few more grid icons and updates some existing ones.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds warning to `url join` when input key is not supported as suggested
by @amtoine in #10506.
It just adds a `println!` statement but it seems like that is all that
is done for other warnings, e.g.,
20aaaaf90c/crates/nu-glob/src/lib.rs (L434)
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All pass.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
> [!NOTE]
> This PR description originally used examples where the `generator`
closure returned a list. It has since been updated to use records
instead.
The `unfold` command allows users to dynamically generate streams of
data. The stream is generated by repeatedly invoking a `generator`
closure. The `generator` closure accepts a single argument and returns a
record containing two optional keys: 'out' and 'next'. Each invocation,
the 'out' value, if present, is added to the stream. If a 'next' key is
present, it is used as the next argument to the closure, otherwise
generation stops.
The name "unfold" is borrowed from other functional-programming
languages. Whereas `fold` (or `reduce`) takes a stream of values and
outputs a single value, `unfold` takes a single value and outputs a
stream of values.
### Examples
A common example of using `unfold` is to generate a fibbonacci sequence.
See
[here](6ffdac103c/src/sources.rs (L65))
for an example of this in rust's `itertools`.
```nushell
> unfold [0, 1] {|fib| {out: $fib.0, next: [$fib.1, ($fib.0 + $fib.1)]} } | first 10
───┬────
0 │ 0
1 │ 1
2 │ 1
3 │ 2
4 │ 3
5 │ 5
6 │ 8
7 │ 13
8 │ 21
9 │ 34
───┴────
```
This command is particularly useful when consuming paginated APIs, like
Github's. Previously, nushell users might use a loop and buffer
responses into a list, before returning all responses at once. However,
this behavior is not desirable if the result result is very large. Using
`unfold` avoids buffering and allows subsequent pipeline stages to use
the data concurrently, as it's being fetched.
#### Before
```nushell
mut pages = []
for page in 1.. {
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
$pages = ($pages | append $resp)
if ($resp | length) < $PAGE_SIZE {
break
}
}
$pages
```
#### After
```nu
unfold 1 {|page|
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
if ($resp | length) < $PAGE_SIZE {
{out: $resp}
} else {
{out: $resp, next: ($page + 1)}
}
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- An `unfold` generator is added to the default context.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Given the complexity of the `generator` closure's return value, it would
be good to document the semantics of `unfold` and provide some in-depth
examples showcasing what it can accomplish.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
resolves#4869
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds a `help escape` command that can be used to display a table of
string escape sequences and their outputs.
```nu
help escapes
```
```nu
help escapes -h
```
The command should also appear in the list displayed when tab
autocompleting on `help`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users can now use a new `help escapes` command to output a table of
string escape sequences and their outputs.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Need to update docs to reflect existence of the new `help escapes`
command.
# Description
Fixes: #7085
Also closes: #7526
# User-Facing Changes
After this change, we need to use `-c` flag like this:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham }
```
But we can rename many columns easily, here is another example:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham, b: ham2 }
```
# Description
Closes#10441
Uses `String::to_lowercase()` when the file's extension `ext` is parsed
to allow `from_decl(format!("from {ext}"))` to return the desired output
regardless of extension case.
It doesn't work with sqlite files since those are handled earlier in the
parsing but I think is good- since there's no standard file extension
used by sqlite so a user will likely want case sensitivity in that case.
This also has the (possibly undesired) effect of making `open`
completely case insensitive, e.g. `open foo.JSON` will work on a file
named `foo.json` and vice versa. This is good on Windows as it treats
`foo.json` and `foo.JSON` as the same file, but may not be the desired
behaviour on Unix.
If this behaviour is undesired I assume it would be fixed with a
`#[cfg(not(unix))]` attribute on the `to_lowercase()` operation but that
produces slightly "uglier" code that I didn't wish to submit unless
necessary.
old behaviour:
new behaviour:
# User-Facing Changes
`open` will now present a table when `open`-ing files with captitalized
extensions rather than the file's raw data
# Tests + Formatting
new test: `parses_file_with_uppercase_extension` which tests the desired
behaviour
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
This merges @horasal 's changes from #10246 and #10269Closes#10205Closes#8714
Fixes the bug that editor paths with spaces are unusable
Closes#10210Closes#10269
# User-Facing Changes
You can now either pass a string with the name of the executable or a
list with the executable and any flags to
`$env.config.buffer_editor`/`$env.EDITOR`/`$env.VISUAL`
Both the external buffer editor of reedline (by default bound to
`Ctrl-o`) and the commands `config nu` and `config env` will respect
those variables in the following order:
1. `$env.config.buffer_editor`
2. `$env.EDITOR`
3. `$env.VISUAL`
Example:
```
$env.EDITOR = "nvim" # The system-wide EDITOR is neovim
$env.config.buffer_editor = ["vim" "-p2"] # Force vim to open two tabs (not particularly useful)
$env.config.buffer_editor = null # Unset `buffer_editor` -> Uses `$env.EDITOR` ergo nvim
```
# Tests + Formatting
None
---------
Co-authored-by: Horasal <1991933+horasal@users.noreply.github.com>
Fixes#10503
Also improves link to metacharacter help;
# Description
`glob` code was using pattern as provided by user. If that had leading
`..\`, `wax::Glob` is documented to treat them as literal chars to be
matched.
Fix is to use `wax::Glob.partition()` to split such invariant prefixes
off the pattern and tack them onto the working directory computed
separately.
Before
```
> ls ..
╭───┬───────┬──────┬──────┬───────────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼───────────────┤
│ 0 │ ../r1 │ dir │ 7 B │ 3 hours ago │
│ 1 │ ../r2 │ dir │ 3 B │ a day ago │
│ 2 │ ../r3 │ dir │ 13 B │ 4 minutes ago │
╰───┴───────┴──────┴──────┴───────────────╯
> glob ../r*
╭────────────╮
│ empty list │
╰────────────╯
```
After
```
> glob ../r*
╭───┬──────────────────────────────╮
│ 0 │ /home/bobhy/src/rust/work/r2 │
│ 1 │ /home/bobhy/src/rust/work/r1 │
│ 2 │ /home/bobhy/src/rust/work/r3 │
╰───┴──────────────────────────────╯
```
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Consistently use `int` for types and commands
h/t @1kinoti
Work for #10332
# User-Facing Changes
Deprecate `random integer` in the next release
New command `random int`
# Tests + Formatting
(-)
Closes https://github.com/nushell/nushell/issues/8847
# Description
If the `HTTP_PROXY` variable is found, use its value to setup ureq
proxy. I haven't implemented `NO_PROXY` at the moment.
# User-Facing Changes
No breaking change for the user, the network commands simply use an
environment variable.
# Tests + Formatting
The existing tests seem to run fine, although I can't think of a new
test to add.
related to
- https://github.com/nushell/nushell/pull/9973
- https://github.com/nushell/nushell/pull/9918
thanks to @jntrnr and their super useful tips on this PR, i learned
about the parser + evaluation, so 🙏
# Description
because we already have `null` as the value of the type `nothing` and as
a followup to the two other attempts of mine, i propose to remove the
redundant `$nothing` built-in variable 😋
this PR is the first step, deprecating `$nothing`.
a followup PR will remove it altogether and wait for 0.87 👍⚙️ **details**: a new `NOTHING_VARIABLE_ID = 3` has been added,
parsing `$nothing` will create it, finally a `Value::Nothing` will be
produced and a warning will be reported.
this PR already fixes the `toolkit.nu` module so that it does not throw
a bunch of warnings each time 👌
# User-Facing Changes
`$nothing` is now deprecated and will be removed in 0.87
```nushell
> $nothing
Error: × Deprecated variable
╭─[entry #1:1:1]
1 │ $nothing
· ────┬───
· ╰── `$nothing` is deprecated and will be removed in 0.87.
╰────
help: Use `null` instead
```
# Tests + Formatting
tests have been updated, especially
- `nothing_fails_string`
- `nothing_fails_int`
which use a variable called `nil` now to make sure `nothing` does not
support cell paths 👍
# After Submitting
classic deprecation mention 👍
should close https://github.com/nushell/nushell/issues/10406
# Description
when writing a script, with variables you try to `ls` or `open`, you
will get a "directory not found" error but the variable won't be
expanded and you won't be able to see which one of the variable was the
issue...
this PR adds this information to the error.
# User-Facing Changes
let's define a variable
```nushell
let does_not_exist = "i_do_not_exist_in_the_current_directory"
```
### before
```nushell
> open $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #7:1:1]
1 │ open $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
```
```nushell
> ls $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #8:1:1]
1 │ ls $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
```
### after
```nushell
> open $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #3:1:1]
1 │ open $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
help: /home/amtoine/documents/repos/github.com/amtoine/nushell/i_do_not_exist_in_the_current_directory does not exist
```
```nushell
> ls $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #4:1:1]
1 │ ls $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
help: /home/amtoine/documents/repos/github.com/amtoine/nushell/i_do_not_exist_in_the_current_directory does not exist
```
# Tests + Formatting
shouldn't harm anything 🤞
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Closes#5436
When I opened this issue more than a year ago, I mainly wanted the
following capacity: easily access the full env and have the hability to
update it when a new version of `nushell` comes out.
With this PR I can now do the following:
```nu
source-env ~/.config/nushell/defaults/env.nu
source ~/.config/nushell/defaults/config.nu
# Update nushell default config & env file (run this after a version update)
def update-defaults [] {
config env --default | save -f ~/.config/nushell/defaults/env.nu
config nu --default | save -f ~/.config/nushell/defaults/config.nu
}
```
Which is more than enough for me. Along with `nushell` respecting the
XDG spec on macOS (`dirs-next` should be banned for CLI tools on macOS),
this should be one of the last hurdle before fully switching for me!
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Two new switches to existing commands:
```nu
config env --default # Print the default env embedded at compile time in the binary
config nu --default # Print the default config embedded at compile time in the binary
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- Added a test for the output of `config env --default`
- Added a test for the output of `config nu --default`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Are the docs for commands generated automatically or do I need to make a
PR there too ? It's no problem if so, just point me at instructions if
there are any :)
# Description
Magenta wasn't being interpreted correctly. note that `bg:
magenta_reverse attr: b` showed up as white. This was because it was
missing from the lookup and it was defaulting to white.
fixes#10490
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #10450
This pr differentiating between `--x: bool` and `--x`
Here are examples which demostrate difference between them:
```nushell
def a [--x: bool] { $x };
a --x # not allowed, you need to parse a value to the flag.
a # it's allowed, and the value of `$x` is false, which behaves the same to `def a [--x] { $x }; a`
```
For boolean flag with default value, it works a little bit different to
#10450 mentioned:
```nushell
def foo [--option: bool = false] { $option }
foo # output false
foo --option # not allowed, you need to parse a value to the flag.
foo --option true # output true
```
# User-Facing Changes
After the pr, the following code is not allowed:
```nushell
def a [--x: bool] { $x }; a --x
```
Instead, you have to pass a value to flag `--x` like `a --x false`. But
bare flag works in the same way as before.
## Update: one more breaking change to help on #7260
```
def foo [--option: bool] { $option == null }
foo
```
After the pr, if we don't use a boolean flag, the value will be `null`
instead of `true`. Because here `--option: bool` is treated as a flag
rather than a switch
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
While reviewing #10350 I noticed that a `HashSet<usize>` was used to
deduplicate the incoming rows, which are then sorted after cloning to a
separate `Vec`. This sounds like a candidate for a `BTreeSet` which
guarantees the ordering.
In the process I removed some dead code.
- Use `BTreeSet` instead of `HashSet`
- Remove dead `skip` logic
- Use `BTreeSet` directly in `NthIterator`
- Consume `BTreeSet` through `Peekable<IntoIter>`
# Description
This PR should close#10085
Maps `DirectoryNotFound` errors to `FileNotFound`. All other errors are
left unchanged.
# User-Facing Changes
This means a user will see `FileNotFound` instead of `DirectoryNotFound`
which is more meaning full to the user.
# Description
This new command `into value` is a command that tries to infer the type
of data you have in a table. It converts each cell to a string and then
runs a set of regular expressions on that string. This was mostly
cobbled together after looking at how polars does similar things. The
regular expressions were taken straight form polars and tweaked.
### Before
```nushell
❯ [[col1 col2 col3 col4 col5 col6]; ["1" "two" "3.4" "true" "2023-08-10 14:07:17.922050800 -05:00" "2023-09-19"]] |
update col1 {|r| $r.col1 | into int } |
update col3 {|r| $r.col3 | into float } |
update col4 {|r| $r.col4 | into bool } |
update col5 {|r| $r.col5 | into datetime } |
update col6 {|r| $r.col6 | into datetime }
╭#┬col1┬col2┬col3┬col4┬───col5────┬───col6────╮
│0│ 1│two │3.40│true│a month ago│8 hours ago│
╰─┴────┴────┴────┴────┴───────────┴───────────╯
```
or
```nushell
❯ [[col1 col2 col3 col4 col5 col6]; ["1" "two" "3.4" "true" "2023-08-10 14:07:17.922050800 -05:00" "2023-09-19"]] |
into int col1 |
into float col3 |
into bool col4 |
into datetime col5 col6
╭#┬col1┬col2┬col3┬col4┬───col5────┬───col6────╮
│0│ 1│two │3.40│true│a month ago│8 hours ago│
╰─┴────┴────┴────┴────┴───────────┴───────────╯
```
### After
```nushell
❯ [[col1 col2 col3 col4 col5 col6]; ["1" "two" "3.4" "true" "2023-08-10 14:07:17.922050800 -05:00" "2023-09-19"]] | into value
╭#┬col1┬col2┬col3┬col4┬───col5────┬───col6────╮
│0│ 1│two │3.40│true│a month ago│8 hours ago│
╰─┴────┴────┴────┴────┴───────────┴───────────╯
```
It's definitely not perfect. There are ways it will fail because on
regular expressions not working on all formats. My hope is that people
will pick this up and add more regular expressions and if there are
problems with the existing ones, change them. This is meant as a
"starter command" with easy entry for newcomers that are looking to chip
in and help out.
Also, some tests probably need to be added to ensure what we have now
doesn't break with updates.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR allows the `values` command to support lazy records.
closes https://github.com/nushell/nushell/issues/10417
### Before
```nushell
sys | values
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #1:1:1]
1 │ sys | values
· ─┬─ ───┬──
· │ ╰── only record or table input data is supported
· ╰── input type: record<host: record<name: string, os_version: string, long_os_version: string, kernel_version: string, hostname: string, uptime: duration, boot_time: string, sessions: list<any>>, cpu: table<name: string, brand: string, freq: int, cpu_usage: float, load_average: string, vendor_id: string>, disks: table<device: string, type: string, mount: string, total: filesize, free: filesize, removable: bool, kind: string>, mem: record<total: filesize, free: filesize, used: filesize, available: filesize, swap total: filesize, swap free: filesize, swap used: filesize>, temp: list<any>, net: table<name: string, sent: filesize, recv: filesize>>
╰────
```
### After
```nushell
❯ sys | values
╭─┬─────────────────╮
│0│{record 8 fields}│
│1│[table 16 rows] │
│2│[table 1 row] │
│3│{record 7 fields}│
│4│[list 0 items] │
│5│[table 5 rows] │
╰─┴─────────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #10410
So the following script is possible:
```nushell
def a [b: any = null] { let b = ($b | default "default_b"); }
a "given_b"
```
## About the change
When parsing signature, and nushell meets something like `a: any`, it
force the parser to treat `a` as `any` type. This is what
`arg_explicit_type` means, it's only set when we goes into
`ParseMode::TypeMode`, and it will be reset to `false` if the token goes
to next argument.
so, when we have something like this: `def a [b: any = null] { $b }`,
the type of `$b` won't be overwritten.
But if we have something like this: `def a [b = null] { $b }`, the type
of `$b` is not annotated, so we make it to be `nothing`(which is the
type of null)
related to
- https://github.com/nushell/nushell/pull/10038
# Description
`str replace --string` has been deprecated in
https://github.com/nushell/nushell/pull/10038 and should be removed
before 0.85.
this PR removes the `--string` option from `str replace` completely.
# User-Facing Changes
`str replace --string` will no longer work and will give an error
instead of a warning.
Bumps [toml](https://github.com/toml-rs/toml) from 0.7.6 to 0.8.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="310f6ee9c5"><code>310f6ee</code></a>
chore: Release</li>
<li><a
href="90da8bc425"><code>90da8bc</code></a>
docs: Update changelog</li>
<li><a
href="f3e120f1a0"><code>f3e120f</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/608">#608</a> from
epage/enum</li>
<li><a
href="58a7101f68"><code>58a7101</code></a>
fix(serde): Support struct variants as table of a table</li>
<li><a
href="88a4dba312"><code>88a4dba</code></a>
fix(serde): Support tuple variants as table of an array</li>
<li><a
href="cf06b83424"><code>cf06b83</code></a>
test(serde): Verify both Table and Value serializers</li>
<li><a
href="4ffa44ec16"><code>4ffa44e</code></a>
test(serde): Make parameter order more consistent</li>
<li><a
href="2b7c34c900"><code>2b7c34c</code></a>
test(serde): Focus on string serialization first</li>
<li><a
href="e2a6a1cece"><code>e2a6a1c</code></a>
test(serde): Verify existing variant behavior</li>
<li><a
href="3f3e8329bb"><code>3f3e832</code></a>
chore: Release</li>
<li>Additional commits viewable in <a
href="https://github.com/toml-rs/toml/compare/toml-v0.7.6...toml-v0.8.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [terminal_size](https://github.com/eminence/terminal-size) from
0.2.6 to 0.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/eminence/terminal-size/releases">terminal_size's
releases</a>.</em></p>
<blockquote>
<h2>v0.3.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Check all streams (out/err/in) to find one that has a tty and size
by <a href="https://github.com/eminence"><code>@eminence</code></a> in
<a
href="https://redirect.github.com/eminence/terminal-size/pull/58">eminence/terminal-size#58</a>
<ul>
<li>Note that this is a subtle change in behavior, since the
<code>terminal_size()</code> function will now return success in cases
more cases than before</li>
</ul>
</li>
<li>Update to rustix 0.38 by <a
href="https://github.com/chenx97"><code>@chenx97</code></a> in <a
href="https://redirect.github.com/eminence/terminal-size/pull/57">eminence/terminal-size#57</a>
<ul>
<li>This change bumps the MSRV from 1.48.0 to 1.63.0</li>
</ul>
</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/eminence/terminal-size/compare/v0.2.6...v0.3.0">https://github.com/eminence/terminal-size/compare/v0.2.6...v0.3.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="2983b7bf18"><code>2983b7b</code></a>
Release v0.3.0</li>
<li><a
href="27a4459b22"><code>27a4459</code></a>
Merge pull request <a
href="https://redirect.github.com/eminence/terminal-size/issues/57">#57</a>
from chenx97/rustix-0.38</li>
<li><a
href="c24c1c34e5"><code>c24c1c3</code></a>
Bump MSRV to 1.63.0</li>
<li><a
href="78e13c77d7"><code>78e13c7</code></a>
Update to rustix 0.38</li>
<li><a
href="18c58b1ed5"><code>18c58b1</code></a>
Merge pull request <a
href="https://redirect.github.com/eminence/terminal-size/issues/58">#58</a>
from eminence/check_all_streams</li>
<li><a
href="08f0e73926"><code>08f0e73</code></a>
Check all streams (out/err/in) to find one that has a tty and size</li>
<li>See full diff in <a
href="https://github.com/eminence/terminal-size/compare/v0.2.6...v0.3.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [mockito](https://github.com/lipanski/mockito) from 1.1.0 to
1.2.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lipanski/mockito/releases">mockito's
releases</a>.</em></p>
<blockquote>
<h2>1.2.0</h2>
<ul>
<li><strong>[Breaking]</strong> The minimum supported Rust version was
bumped to 1.68.0</li>
<li>The server pool was limited to 20 servers for <code>mac_os</code>
targets to prevent hitting the file descriptor limit</li>
</ul>
<p>Thanks to <a
href="https://github.com/kornelski"><code>@kornelski</code></a></p>
<h2>1.1.1</h2>
<ul>
<li><a
href="https://redirect.github.com/lipanski/mockito/pull/176">Ensure</a>
<code>with_chunked_body</code> supports streaming responses (as opposed
to writing the entire buffer in one go)</li>
</ul>
<p>Thanks to <a
href="https://github.com/kornelski"><code>@kornelski</code></a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7514e38524"><code>7514e38</code></a>
Bump to 1.2.0</li>
<li><a
href="be00de417e"><code>be00de4</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/177">#177</a>
from kornelski/pool</li>
<li><a
href="6b4073e911"><code>6b4073e</code></a>
MSRV</li>
<li><a
href="9faa825110"><code>9faa825</code></a>
Test exhausting server pool</li>
<li><a
href="3099e94471"><code>3099e94</code></a>
Simplify server pool</li>
<li><a
href="99735e7c41"><code>99735e7</code></a>
Bump to 1.1.1</li>
<li><a
href="3b63970619"><code>3b63970</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/176">#176</a>
from kornelski/stream</li>
<li><a
href="339bffc983"><code>339bffc</code></a>
Support streaming body</li>
<li><a
href="8b7575cd38"><code>8b7575c</code></a>
Simplify server pool test</li>
<li>See full diff in <a
href="https://github.com/lipanski/mockito/compare/1.1.0...1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR cleans up some warnings on the latest chrono dependency.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- this PR should close#10197
# Description
`input --bytes-until` takes a string but used to only terminate on the
first byte of that string. Now it checks for each byte in the string.
# User-Facing Changes
all of the above. No change in documentation needed. New behavior
arguably fits better.
# Tests + Formatting
don't know how to test input
# Description
Fixes a bug in `let` where the pipeline wasn't being properly
redirected.
fixes#9767
# User-Facing Changes
Shouldn't have any breaking changes, as this should be better for
expected use cases.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
We made the decision that our floating point type should be referred to
as `float` over `decimal`.
Commands were updated by #9979 and #10320
Now make the internal codebase consistent in referring to this data type
as `float`.
Work for #10332
# User-Facing Changes
`decimal` has been removed as a type name/symbol.
Instead of
```nushell
def foo [bar: decimal] decimal -> decimal {}
```
use
```nushell
def foo [bar: float] float -> float {}
```
Potential effect of `SyntaxShape`'s `Display` implementation now also
referring to `float` instead of `decimal`
# Details
- Rename `SyntaxShape::Decimal` to `Float`
- Update `Display for SyntaxShape` to `float`
- Update error message + fn name in dataframe code
- Fix docs in command examples
- Rename tests that are float specific
- Update doccomment on `SyntaxShape`
- Update comment in script
# Tests + Formatting
Updates the names of some tests
# Description
this commit adds the handling of Value::List when BodyType is Json
it also adds the corresponding test (trying to send a list)
Fixes#10319
# User-Facing Changes
Added the ability to send a json list in the POST message
# Tests + Formatting
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
Also ran `nc -l -p 8080` in other terminal and `http post -fe -t
application/json http://localhost:8080 [{ field: true }]` I see the
following appear in the output of nc:
```
POST / HTTP/1.1
Host: localhost:8080
User-Agent: nushell
Accept: */*
Content-Type: application/json
accept-encoding: gzip
Content-Length: 16
[{"field":true}]%
```
```nu
$env.config.color_config.leading_trailing_space_bg = { bg: 'white' }; [[a b, 'c ']; [' 1 ' ' 2' '3 '] [' 4 ' "hello \n world " [' 1 ' 2 [1 ' 2 ' 3]]]] | table --expand
```
ref: #2794close: #10317
note: test are not actually make scenes cause `nu!` strips colors.
(Ideally it would need a flag to not do so)
note: It does does does ... slower down quite a bit rendering... (
PS: Maybe it's better being a flag to `table` rather then a
configuration option?
PS: I am not sure why the logic was removed in a first place
This PR is in reference to #10215.
This PR changes `select` to work even if multiple equal items were
provided.
This would previously error, but now works
```nushell
let arg = [ 1 a ]
[[a b c]; [1 2 3] [4 5 6] [7 8 9]]
| select $arg
```
# User-Facing Changes
Nothing too radical, just experience improvements. Users won't need to
pass the values through `unique` beforehand.
# Description
Currently we support "multiplication" of strings, resulting in a terse
way to repeat a particular string.
This can have unintended side effects when dealing with mixed data (e.g.
after parsing data that is not all numbers).
Furthermore as we frequently fall-back to strings while parsing source
code, this introduced a runaway edge case in const evaluation (#10212)
Work for #10233
## Details
- Remove python-like string multiplication.
- Workaround for indentation
- This should probably be addressed with a purpose built command
- Remove special const-eval error test
# User-Facing Changes
**Major breaking change!**
`"string" * 42` will stop working. (This was used for example in the
stdlib)
We should bless a good alternative before landing this
---------
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Elide the reference for `Copy` type (`usize`)
Use the canonical deref where possible.
* `&Box` -> `&`
* `&String` -> `&str`
* `&PathBuf` -> `&Path`
Skips the ctrl-C handler for now.
# Description
The pythonism that multiplying a scalar integer with a list results in a
repeated concatenation of the list, is ambiguous with other possible
interpretations and thus actively harmful to clear semantics in nushell.
Another possible reading of this scalar/vector product would be trying
to perform elementwise multiplication with the scalar.
Before we bless this alternative as a more reasonable design the best
course of action is to remove this pythonism.
Work related to #10233
# User-Facing Changes
Breaking change as this turns `int * list` or `list * int` into hard
errors.
# Tests + Formatting
Remove the associated test
# Description
This PR tried to add a few more columns to the Linux `ps -l` command.
Those columns are:
* start_time
* user_id
* priority
* process_threads
There are a few that I left commented out that could be added but the
screen was beginning to look crowded. So, I left out:
* group_id
* session_id
* tgp_id (which could be helpful for eventual job control)
And there's like 100 more things that could be added that didn't seem
especially useful right now.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This changes `echo` to work more closely to what users of other shells
would expect:
* when redirected, `echo` works as before and sends values through the
pipeline
* when not redirected, `echo` will print values to the screen/terminal
# User-Facing Changes
A standalone `echo` now will print to the terminal, if not redirected.
The `echo` command is no longer const eval-able, as it will now print to
the terminal in some cases.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
fixes#8551
# Description
Use `open::commands` function to get list of command available for
starting given path. run commands directly, providing environment, until
one of them is successful.
example of output if start was not successful:
```
~\code\nushell> start ..\nustart\a.myext 09/12/2023 01:37:55 PM
Error: nu:🐚:external_command
× External command failed
╭─[entry #1:1:1]
1 │ start ..\nustart\a.myext
· ─────────┬────────
· ╰── No command found to start with this path
╰────
help: Try different path or install appropriate command
Command `cmd /c start "" "..\nustart\a.myext"` failed with exit code: 1
```
# User-Facing Changes
`start` command now provides environment to the external command. This
is how it worked in `nu 0.72`, see linked issue.
# Tests + Formatting
`start` command didn't have any tests and this PR does not add any.
Integration-level tests will require setup specific to OS and
potentially change global environment on testing machine. For unit-level
test it is possible to test `try_commands` function. But is still runs
external commands, and robust test will require apriori knowledge which
commands are necessary successful to run and which are not.
# Description
Similar to #9979
# User-Facing Changes
`random decimal` will now raise a warning and can be removed in an
upcoming release.
New command is named `random float`
# Tests + Formatting
Tests updated and improved.
# Description
We keep "into decimal" for a release and warn through a message that it
will be removed in 0.86.
All tests are updated to use `into float`
# User-Facing Changes
`into decimal` raises a deprecation warning, will be removed soon.
Use `into float` as the new functionally identical command instead.
```
~/nushell> 2 | into decimal
Error: × Deprecated command
╭─[entry #1:1:1]
1 │ 2 | into decimal
· ──────┬─────
· ╰── `into decimal` is deprecated and will be removed in 0.86.
╰────
help: Use `into float` instead
2
```
# Tests + Formatting
Updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This generally makes for nicer APIs, as you are not forced to use an
existing allocation covering the full `String`.
Some exceptions remain where the underlying type requirements favor it.
# User-Facing Changes
None
# Description
This removes pipeline element profiling. This could be a useful feature,
but pipeline elements are going to be the most sensitive to in terms of
performance, as `eval_block` and how pipelines are built is one of the
hot loops inside of the eval engine.
# User-Facing Changes
Removes pipeline element profiling.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds new flag `--keep-order/-k` for the `par_each` filter. This
flag keeps sequence of output same as the order of input.
Output without the flag:
```nu
> 1..6 | par-each {|n| $n * 2 }
╭────╮
│ 4 │
│ 10 │
│ 2 │
│ 8 │
│ 12 │
│ 6 │
╰────╯
```
Output with the `--keep-order` flag:
```nu
> 1..6 | par-each --keep-order {|n| $n * 2 }
╭────╮
│ 2 │
│ 4 │
│ 6 │
│ 8 │
│ 10 │
│ 12 │
╰────╯
```
I think the presence of this flag is justified, since:
- Much easier to use than `.. | enumerate | par-each {|p| update item
..} | sort-by index | get item`
- Faster, as it uses internally parallel sorting in the same thread pool
A note about naming: it may conflict with `--keep-empty/-k` flag of the
`each` filter if the same feature will be used in `par-each`, so maybe
it needs some other name.
Upgrade calamine to 0.22
Reduces one potential dependency duplication
Supersedes #10305
Includes fixes for clippy lints as API changed to return owned data.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Fixes#10300 , where using variables didnt work with `ucp` as it was
only expecting a `Expr::FilePath`.
Before: (from the issue)
```
❯ ucp -r $var $folder
Error: × Missing file operand
╭─[entry #40:1:1]
1 │ ucp -r $var $folder
· ─┬─
· ╰── Missing file operand
╰────
help: Please provide source and destination paths
```
Now:
```
`ucp -r $var $folder`
# success
```
Also added the test to ensure its working:) . Oh, and I tweaked again
slightly the messages on two tests because now the whole `path` is
printed rather than `a`. Say:
```
#before
`cp a a` --> 'a' and 'a' are the same file
# now
`cp a a` --> /home/current/location/a and /home/current/location/a are the same file
```
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
<!--
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
-
https://discord.com/channels/601130461678272522/614593951969574961/1150395064292495400
# Description
two cool things about the `where` command
- it's versatile enough to allow creating a case-insensitive version of
itself
- it does not require the explicit use of a closure
this PR adds an example showing how to filter with `where` but
case-insensitively and without an explicite closure.
# User-Facing Changes
new example to `where`:
```nushell
Find case-insensitively files called "readme", without an explicit closure
> ls | where ($it.name | str downcase) =~ readme
```
# Tests + Formatting
the new example test above.
# After Submitting
# Description
This PR fixes some ucp warnings.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR is in relation to #10215
# Description
This PR introduces `reject` to receive list of columns or rows as
argument.
This change is similar to change of `select` and the code used is
similar.
# User-Facing Changes
The user will be able to pass a list as rejection arguments.
```nushell
let arg = [ type size ]
[[name type size]; [ cargo.toml file 20mb ] [ Cargo.lock file 20mb] [src dir 100mb]] | reject $arg
```
# Description
This PR fixes `reject` failing when providing row items in ascending
order.
# User-Facing Changes
users can now `reject` multiple rows independently of each other.
```nushell
let foo = [[a b]; [ 1 2] [3 4] [ 5 6]]
# this will work independant of the order
print ($foo | reject 2 1)
print ($foo | reject 1 2)
```
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
related to
-
https://discord.com/channels/601130461678272522/615329862395101194/1149717458786197524
# Description
because `1_234 | into datetime` takes an integer number of `ns` and
`1_234 | into filesize` takes an integer amount of bytes, i think `1_234
| into duration` should also be valid and see `1_234` as an integer
amount of `ns` 😋
# User-Facing Changes
## before
either
```nushell
1234 | into string | $in ++ "ns" | into duration
```
```nushell
1234 | $"($in)ns" | into duration
```
or
```nushell
1234 * 1ns
```
and
```nushell
> 1_234 | into duration
Error: nu::parser::input_type_mismatch
× Command does not support int input.
╭─[entry #2:1:1]
1 │ 1_234 | into duration
· ──────┬──────
· ╰── command doesn't support int input
╰────
```
## after
```nushell
> 1_234 | into duration
1µs 234ns
```
# Tests + Formatting
new example test
```rust
Example {
description: "Convert a number of ns to duration",
example: "1_234_567 | into duration",
result: Some(Value::duration(1_234_567, span)),
}
```
# After Submitting
# Description
This PR is an attempt to fix the `update` command so that it passes
along metadata. I'm not really sure I did this right, so please feel
free to point out where it's wrong.
The point is to be able to do something like this and have it respect
your LS_COLORS.
```
ls | update modified { format date }
```
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Supercedes https://github.com/nushell/nushell/pull/10196
# Description
After reading
https://github.com/nushell/nushell/pull/10196#issuecomment-1703986359 I
added a signpost from `keybindings listen` to `input listen`
When I initially tried `input listen` it always immediately returned
with:
```
╭───────┬────────╮
│ type │ focus │
│ event │ gained │
╰───────┴────────╯
```
I added an example to `input listen --help` to suggest only listening to
key events
Initially I also included a `result` but it prints as:
```
╭───────────┬───────────────╮
│ type │ key │
│ key_type │ char │
│ code │ c │
│ modifiers │ [list 1 item] │
╰───────────┴───────────────╯
```
rather than:
```
╭───────────┬───────────────────────────────╮
│ type │ key │
│ key_type │ char │
│ code │ c │
│ │ ╭───┬───────────────────────╮ │
│ modifiers │ │ 0 │ keymodifiers(control) │ │
│ │ ╰───┴───────────────────────╯ │
╰───────────┴───────────────────────────────╯
```
so I removed it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* Example describing how to use `input list --types [key]` to listen for
keybindings.
* Signpost pointing at `use std input; input list --types [key]` from
`keybindings list`.
## After merging
It is probably worth:
a) signposting to the keybindings section of the book from both of these
subcommands (like I did in
https://github.com/nushell/nushell/pull/10193),
b) giving an example in the book of how to take the output from `input
listen --types [key]` and format it for including in `config nu`
c) there are not currently any examples in
crates/nu-utils/src/sample_config/default_config.nu for keybindings with
multiple modifiers. Should I add alt+backspace-in-macos-vscode as an
example (gets translated to `{ modifier: control_alt keycode: char_h }`
for historical reasons)?
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Hi. Basically, this is a continuation of the work that @fdncred started.
Given some nice discussions on #9463 , and [merged uutils
PR](https://github.com/uutils/coreutils/pull/5152) from @tertsdiepraam
we have decided to give the `cp` command the `crawl` stage as it was
named.
> [!NOTE]
Given that the `uutils` crate has not made the release for the merged
PR, just make sure you checkout latest and put it in the required place
to make this PR work.
The aim of this PR is for is to see how to move forward using `uutils`
crate. In order to getting this started, I have made the current
`nushell cp tests` pass along with some extra ones I copied over from
the `uutils` repo.
With all of that being said, things that would be nice to decide, and
keep working on:
Crawl:
- Handling of certain `named` flags, with their long and short
forms(e.g. --update, --reflink, --preserve, etc), and using default
values. Maybe `-u` can already have a `default_missing_value`.
- Should we maybe just support one single option `switch` flags (see
`--backup` in code) as a contrast to the other named args.
- Complete test coverage from `uutils`. They had > 100 tests, and I
could only port like 12 as they are a bit time consuming given they
cannot be straight up copy pasted. Maybe we do not need all >100, but
maybe the more relevant to what we want.
- Refactor this code
Walk:
- Non fatal errors on `copy` from `utils`. Currently it just sends it to
stdout but errors have no span
- Better integration
An added possibility is the addition of `SyntaxShape::OneOf()` for
`Named` arguments which was briefly mentioned in the discord server, but
that is still to be decided. This could greatly improve some of the
integration. This would enable something like `cp --preserve [all
timestamp]` or `cp --preserve all` to both work.
I did not want to keep holding on this, and wait till I was happy with
the code because I think its nice if everyone can start up and suggest
refactors, but the main important part now was getting it out the door,
as if I take my sweet time this will take way longer 😛
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [X] cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- [X] cargo test --workspace` to check that all tests pass
- [X] cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR adds a few more columns to `ps -l` on Windows. It would be good
to add these changes cross-platform in separate PRs. This PR also fixes
a bug where start time was calculated wrong.
I've added:
start_time
user
user_sid
priority
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Apparently some strftime formats are already localized and when you
"double localize" them, they don't work. This PR fixes that so that %x
%X %r %c don't go through the localization step.
Example: %x %X
### Before
```nushell
❯ date now | format date "%x %X %p"
09/08/2023 08 AM
```
### After
```nushell
❯ date now | format date "%x %X %p"
09/08/23 08:09:14 AM
```
I started to make one format_datetime to rule them all but one returns a
string and one returns a value. If we convert to the string, we lose the
nice error messages. If we change to value, more code has to be changed
elsewhere. So, I decided to just leave two functions.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
before this PR,
```nushell
> $.a.b | describe
cell path
```
which feels inconsistent with the `cell-path` type annotation, like in
```nushell
> def foo [x: cell-path] { $x | describe }; foo $.a.b
cell path
```
this PR changes the name of the "cell path" type from `cell path` to
`cell-path`
# User-Facing Changes
`cell path` is now `cell-path` in the output of `describe`.
this might be a breaking change in some scripts.
same goes with
- `list stream` -> `list-stream`
- `match pattern` -> `match-pattern`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
this PR adds a new `cell_path_type` test to make sure it stays equal to
`cell-path` in the future.
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Related to https://github.com/nushell/nushell.github.io/pull/1048
Include this information in the command help.
# User-Facing Changes
As soon as this information is documented people are much more likely to
depend on it so we need to be careful in the future if this design
sparks joy or not.
should close https://github.com/nushell/nushell/issues/10237
# Description
this is @fdncred's findings 😋
i just made the PR 😌
# User-Facing Changes
```nushell
[a b] | where $it == 'c' | last | default 'd'
```
now works and gives `d`
# Tests + Formatting
adds a new `default_after_empty_filter` test.
# After Submitting
# Description
Closes: #10218
I think this is `sleep`'s specific issue, it's because it always return
a `Value::nothing` where it's interrupted by `ctrl-c`.
To fix the issue, I'd propose to make it returns Err(ShellError)
This is how it behaves:
```nushell
❯ sleep 5sec; echo "hello!"
^CError: nu:🐚:sleep_breaked
× Sleep is breaked.
❯ sleep 5sec; ^echo "hello!"
^CError: nu:🐚:sleep_breaked
× Sleep is breaked.
```
# User-Facing Changes
None
# Tests + Formatting
# After Submitting
# Description
Currently on Android, there are warnings about unused variables. This PR
fixes that with more conditional guards for the unused variables.
Additionally, in #10013, @kubouch gave feedback in [the last
PR](https://github.com/nushell/nushell/pull/10013#pullrequestreview-1596828128)
that it was unwieldy to repeat
```rust
#[cfg(all(
feature = "trash-support",
not(target_os = "android"),
not(target_os = "ios")
))]
```
# Description
This PR makes `append`/`prepend` more consistent, in particular, it allows you to
work with ranges. Previously, you couldn't append a list by range:
```nu
> 0..1 | append 2..4
╭──────╮
│ 0 │
│ 1 │
│ 2..4 │
╰──────╯
```
Now it works:
```nu
> 0..1 | append 2..4
╭───╮
│ 0 │
│ 1 │
│ 2 │
│ 3 │
│ 4 │
╰───╯
```
# User-Facing Changes
If someone needs the old behavior, then it can be obtained like this:
```nu
> 0..1 | append [2..4]
╭──────╮
│ 0 │
│ 1 │
│ 2..4 │
╰──────╯
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
rustfmt 1.6.0 has added support for formatting [let-else
statements](https://doc.rust-lang.org/rust-by-example/flow_control/let_else.html)
See https://github.com/rust-lang/rustfmt/blob/master/CHANGELOG.md#added
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fix https://github.com/nushell/nushell/issues/10136
# Description
Current nushell only handle path containing '*' as match pattern and
treat '?' as just normal path.
This pr makes path containing '?' is also processed as pattern.
🔴 **Concerns: Need to design/comfirm a consistent rule to handle
dirs/files with '?' in their names.**
Currently:
- if no dir has exactly same name with pattern, it will print the list
of matched directories
- if pattern exactly matches an empty dir's name, it will just print the
empty dir's content ( i.e. `[]`)
- if pattern exactly matches an dir's name, it will perform pattern
match and print all the dir contains
e.g.
```bash
mkdir src
ls s?c
```
| name | type | size | modified |
| ---- | ---- | ------ | --------------------------------------------- |
| src | dir | 1.1 KB | Tue, 29 Aug 2023 07:39:41 +0900 (9 hours ago) |
-----------
```bash
mkdir src
mkdir scc
mkdir scs
ls s?c
```
| name | type | size | modified |
| ---- | ---- | ------ |
------------------------------------------------ |
| scc | dir | 64 B | Tue, 29 Aug 2023 16:55:31 +0900 (14 seconds ago) |
| src | dir | 1.1 KB | Tue, 29 Aug 2023 07:39:41 +0900 (9 hours ago) |
-----------
```bash
mkdir s?c
ls s?c
```
print empty (i.e. ls of dir `s?c`)
-----------
```bash
mkdir -p s?c/test
ls s?c
```
|name|type|size|modified|
|-|-|-|-|
|s?c/test|dir|64 B|Tue, 29 Aug 2023 16:47:53 +0900 (2 minutes ago)|
|src/bytes|dir|480 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
|src/charting|dir|160 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
|src/conversions|dir|160 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
-----------
# User-Facing Changes
User will be able to use '?' to match directory/file.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
None
---------
Co-authored-by: Horasal <horsal@horsal.dev>
# Description
This updates most crates to 0.27 `crossterm`.
To do so we need the most recent `ratatui`
`reedline` can now update as well.
See https://github.com/nushell/reedline/pull/625
Sadly this introduces some crate duplication again as there are some
other dependency updates.
Furthermore we have another crate depending on 0.26.1 crossterm
(`comfy-table` that some how gets pulled in by polars)
# User-Facing Changes
2 additional mouse events detected by `input listen`
# Tests + Formatting
None
# Description
As part of the refactor to split spans off of Value, this moves to using
helper functions to create values, and using `.span()` instead of
matching span out of Value directly.
Hoping to get a few more helping hands to finish this, as there are a
lot of commands to update :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <windsoilder@outlook.com>
close#8074
I attempted to refactor the "input" command. The reason for this is that
the current implementation of the "input" command lacks consistency for
different options. For instance, some parts use `std::io::stdin` while
others use `crossterm::event::read`.
In this pull request, I have made changes to use crossterm consistently:
- Detection of the -u option is now done using `crossterm`'s
`KeyCode::Char`.
- The current input is displayed when using `crossterm` for input (it
won't be displayed when -s is present).
- Ctrl-C triggers SIGINT.
# User-Facing Changes
Users can interrupt "input" with ctrl-c.
They relied on the `nu_plugin_inc` but where behind a feature flag that
isn't actually defined anywhere. These tests of `update` or `upsert`
shouldn't really depend on `inc` so I decided to remove them outright as
they haven't been used to exercise the commands under test.
As described in Issue #8670, removed `pipeline()` wherever its argument
contained no line breaks.
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
- this PR should close#10132
# Description
* added a flag to `from csv --ascii` that replaces the given `separator
with the unicode separator x1f https://www.codetable.net/hex/1f (aka
Information Separator One)
# User-Facing Changes
New flags are available for `from csv` ( `--ascii` or short `-a`)
# Tests + Formatting
There are no tests at the moment. Code has been formatted.
- `cargo test --workspace` (breaks with a non related test on my
machine)
Polars and SQLParser upgrade.
I have exposed features that have been added to polars as command args
where appropriate.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
I moved hook to *nu_cmd_base* instead of *nu_cli* because it will enable
other developers to continue to use hook even if they decide to write
their on cli or NOT depend on nu-cli
Then they will still have the hook functionality because they can
include nu-cmd-base
# Description
This PR names the hooks as they're executing so that you can see them
with debug statements. So, at the beginning of `eval_hook()` you could
put a dbg! or eprintln! to see what hook was executing. It also shows up
in View files.
### Before - notice item 14 and 25
### After - The hooks are now named (14 & 25)
Curiosity, on my mac, the display_output hook fires 3 times before
anything else. Also, curious is that the value if the display_output, is
not what I have in my config but what is in the default_config. So,
there may be a bug or some shenanigans going on somewhere with hooks.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to remove ~atty~ is-terminal from the entire code base,
since ~[atty is
unmaintained](https://rustsec.org/advisories/RUSTSEC-2021-0145) and~
[`is_terminal` has been
stabilized](https://blog.rust-lang.org/2023/06/01/Rust-1.70.0.html#isterminal)
in rust 1.70.0.
cc @fdncred
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
`chrono` crate enables `oldtime` feature by default, which has a
vulnerability (https://rustsec.org/advisories/RUSTSEC-2020-0071). This
PR tries to remove `time` v0.1.45 completely from nu and add an audit CI
to check for security vulnerabilities.
✋ Wait for the following PRs:
- [x] https://github.com/nushell/reedline/pull/599
- [x] https://github.com/bspeice/dtparse/pull/44
- [x] https://github.com/Byron/trash-rs/pull/75
- [x] https://gitlab.com/imp/chrono-humanize-rs/-/merge_requests/15
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
Allow `decode` command to guess the encoding of input if no encoding
name is given.
# User-Facing Changes
* `decode` now has an optional parameter instead of required one. User
can just run `decode` to let the command automatically detect encoding
and convert it to utf-8.
<img width="575" alt="Example"
src="https://github.com/nushell/nushell/assets/1991933/03a0ba11-910e-4db9-89aa-79cfec06893f">
* Based on the detect result, user may have to give a encoding name
<img width="572" alt="Error Sample1"
src="https://github.com/nushell/nushell/assets/1991933/f21fda85-1f04-4cb3-9feb-cb9fb7dcee07">
or get informed that the input is not supported by `decode`
<img width="568" alt="Error Sample2"
src="https://github.com/nushell/nushell/assets/1991933/dd3cc4c0-f119-493e-8609-d07594fc055a">
# Tests + Formatting
* `cargo fmt --all -- --check` : OK
* `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err`: OK
* `cargo test --workspace` : OK
* `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"`: OK
# After Submitting
[Command document](https://www.nushell.sh/commands/docs/decode.html) is
auto-generated and requires no action.
---------
Co-authored-by: Horasal <horsal@horsal.dev>
# Description
This doesn't really do much that the user could see, but it helps get us
ready to do the steps of the refactor to split the span off of Value, so
that values can be spanless. This allows us to have top-level values
that can hold both a Value and a Span, without requiring that all values
have them.
We expect to see significant memory reduction by removing so many
unnecessary spans from values. For example, a table of 100,000 rows and
5 columns would have a savings of ~8megs in just spans that are almost
always duplicated.
# User-Facing Changes
Nothing yet
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR creates a new `Record` type to reduce duplicate code and
possibly bugs as well. (This is an edited version of #9648.)
- `Record` implements `FromIterator` and `IntoIterator` and so can be
iterated over or collected into. For example, this helps with
conversions to and from (hash)maps. (Also, no more
`cols.iter().zip(vals)`!)
- `Record` has a `push(col, val)` function to help insure that the
number of columns is equal to the number of values. I caught a few
potential bugs thanks to this (e.g. in the `ls` command).
- Finally, this PR also adds a `record!` macro that helps simplify
record creation. It is used like so:
```rust
record! {
"key1" => some_value,
"key2" => Value::string("text", span),
"key3" => Value::int(optional_int.unwrap_or(0), span),
"key4" => Value::bool(config.setting, span),
}
```
Since macros hinder formatting, etc., the right hand side values should
be relatively short and sweet like the examples above.
Where possible, prefer `record!` or `.collect()` on an iterator instead
of multiple `Record::push`s, since the first two automatically set the
record capacity and do less work overall.
# User-Facing Changes
Besides the changes in `nu-protocol` the only other breaking changes are
to `nu-table::{ExpandedTable::build_map, JustTable::kv_table}`.
- fixed#9156
# Description
I'm trying to fix the problems mentioned in the issue. It's my first
attempt in Rust. Please let me know if there are any problems.
# User-Facing Changes
- The `--little-endian` option dropped, replaced with `--endian`.
- Add the `--compact` option to the `into binary` command.
- `into int` accepts binary input
Closes#9910 FOR REAL this time.
I had fixed the issue on Linux but not Windows. Context:
https://github.com/nushell/nushell/issues/9910#issuecomment-1689308886
I've tested this PR successfully on Windows, Linux, and macOS by running
`watch . {|a,b| print $a; print $b}` and confirming that it prints once
when I change a file in the current directory.
# Description
This PR removes `record` processing from the `length` command. It just
doesn't make sense to try and get the length of a record. This PR also
removes the `--column` parameter. If you want to list or count columns,
you could use `$table | columns` or `$table | columns | length`.
close#10074
### Before
### After
Catches records two different ways now.
with the `input_output_types` checker
and with additional logic in the command for cases like `echo`
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR bumps nushell from release version 0.84.0 to dev version 0.84.1.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes the signature of the `help` command so that it can
return a `Type::Table`.
closes#10077
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
https://github.com/nushell/nushell/pull/9773 introduced constants to
modules and allowed to export them, but only within one level. This PR:
* allows recursive exporting of constants from all submodules
* fixes submodule imports in a list import pattern
* makes sure exported constants are actual constants
Should unblock https://github.com/nushell/nushell/pull/9678
### Example:
```nushell
module spam {
export module eggs {
export module bacon {
export const viking = 'eats'
}
}
}
use spam
print $spam.eggs.bacon.viking # prints 'eats'
use spam [eggs]
print $eggs.bacon.viking # prints 'eats'
use spam eggs bacon viking
print $viking # prints 'eats'
```
### Limitation 1:
Considering the above `spam` module, attempting to get `eggs bacon` from
`spam` module doesn't work directly:
```nushell
use spam [ eggs bacon ] # attempts to load `eggs`, then `bacon`
use spam [ "eggs bacon" ] # obviously wrong name for a constant, but doesn't work also for commands
```
Workaround (for example):
```nushell
use spam eggs
use eggs [ bacon ]
print $bacon.viking # prints 'eats'
```
I'm thinking I'll just leave it in, as you can easily work around this.
It is also a limitation of the import pattern in general, not just
constants.
### Limitation 2:
`overlay use` successfully imports the constants, but `overlay hide`
does not hide them, even though it seems to hide normal variables
successfully. This needs more investigation.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Allows recursive constant exports from submodules.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to fix `into datetime`. The problem was that it didn't
support many input formats and the `--format` was clunky. `--format` is
still a bit clunky but can work. The big change here is that it first
tries to use `dtparse` to convert text into datetime.
### Before
```nushell
❯ '20220604' | into datetime
Thu, 01 Jan 1970 00:00:00 +0000 (53 years ago)
```
### After
```nushell
❯ '20220604' | into datetime
Sat, 04 Jun 2022 00:00:00 -0500 (a year ago)
```
## Supported Input Formats
`dtparse` should support all these formats. Taken from their
[repo](https://github.com/bspeice/dtparse/blob/master/build_pycompat.py).
```python
'test_parse_default': [
"Thu Sep 25 10:36:28",
"Sep 10:36:28", "10:36:28", "10:36", "Sep 2003", "Sep", "2003",
"10h36m28.5s", "10h36m28s", "10h36m", "10h", "10 h 36", "10 h 36.5",
"36 m 5", "36 m 5 s", "36 m 05", "36 m 05 s", "10h am", "10h pm",
"10am", "10pm", "10:00 am", "10:00 pm", "10:00am", "10:00pm",
"10:00a.m", "10:00p.m", "10:00a.m.", "10:00p.m.",
"October", "31-Dec-00", "0:01:02", "12h 01m02s am", "12:08 PM",
"01h02m03", "01h02", "01h02s", "01m02", "01m02h", "2004 10 Apr 11h30m",
# testPertain
'Sep 03', 'Sep of 03',
# test_hmBY - Note: This appears to be Python 3 only, no idea why
'02:17NOV2017',
# Weekdays
"Thu Sep 10:36:28", "Thu 10:36:28", "Wed", "Wednesday"
],
'test_parse_simple': [
"Thu Sep 25 10:36:28 2003", "Thu Sep 25 2003", "2003-09-25T10:49:41",
"2003-09-25T10:49", "2003-09-25T10", "2003-09-25", "20030925T104941",
"20030925T1049", "20030925T10", "20030925", "2003-09-25 10:49:41,502",
"199709020908", "19970902090807", "2003-09-25", "09-25-2003",
"25-09-2003", "10-09-2003", "10-09-03", "2003.09.25", "09.25.2003",
"25.09.2003", "10.09.2003", "10.09.03", "2003/09/25", "09/25/2003",
"25/09/2003", "10/09/2003", "10/09/03", "2003 09 25", "09 25 2003",
"25 09 2003", "10 09 2003", "10 09 03", "25 09 03", "03 25 Sep",
"25 03 Sep", " July 4 , 1976 12:01:02 am ",
"Wed, July 10, '96", "1996.July.10 AD 12:08 PM", "July 4, 1976",
"7 4 1976", "4 jul 1976", "7-4-76", "19760704",
"0:01:02 on July 4, 1976", "0:01:02 on July 4, 1976",
"July 4, 1976 12:01:02 am", "Mon Jan 2 04:24:27 1995",
"04.04.95 00:22", "Jan 1 1999 11:23:34.578", "950404 122212",
"3rd of May 2001", "5th of March 2001", "1st of May 2003",
'0099-01-01T00:00:00', '0031-01-01T00:00:00',
"20080227T21:26:01.123456789", '13NOV2017', '0003-03-04',
'December.0031.30',
# testNoYearFirstNoDayFirst
'090107',
# test_mstridx
'2015-15-May',
],
'test_parse_tzinfo': [
'Thu Sep 25 10:36:28 BRST 2003', '2003 10:36:28 BRST 25 Sep Thu',
],
'test_parse_offset': [
'Thu, 25 Sep 2003 10:49:41 -0300', '2003-09-25T10:49:41.5-03:00',
'2003-09-25T10:49:41-03:00', '20030925T104941.5-0300',
'20030925T104941-0300',
# dtparse-specific
"2018-08-10 10:00:00 UTC+3", "2018-08-10 03:36:47 PM GMT-4", "2018-08-10 04:15:00 AM Z-02:00"
],
'test_parse_dayfirst': [
'10-09-2003', '10.09.2003', '10/09/2003', '10 09 2003',
# testDayFirst
'090107',
# testUnambiguousDayFirst
'2015 09 25'
],
'test_parse_yearfirst': [
'10-09-03', '10.09.03', '10/09/03', '10 09 03',
# testYearFirst
'090107',
# testUnambiguousYearFirst
'2015 09 25'
],
'test_parse_dfyf': [
# testDayFirstYearFirst
'090107',
# testUnambiguousDayFirstYearFirst
'2015 09 25'
],
'test_unspecified_fallback': [
'April 2009', 'Feb 2007', 'Feb 2008'
],
'test_parse_ignoretz': [
'Thu Sep 25 10:36:28 BRST 2003', '1996.07.10 AD at 15:08:56 PDT',
'Tuesday, April 12, 1952 AD 3:30:42pm PST',
'November 5, 1994, 8:15:30 am EST', '1994-11-05T08:15:30-05:00',
'1994-11-05T08:15:30Z', '1976-07-04T00:01:02Z', '1986-07-05T08:15:30z',
'Tue Apr 4 00:22:12 PDT 1995'
],
'test_fuzzy_tzinfo': [
'Today is 25 of September of 2003, exactly at 10:49:41 with timezone -03:00.'
],
'test_fuzzy_tokens_tzinfo': [
'Today is 25 of September of 2003, exactly at 10:49:41 with timezone -03:00.'
],
'test_fuzzy_simple': [
'I have a meeting on March 1, 1974', # testFuzzyAMPMProblem
'On June 8th, 2020, I am going to be the first man on Mars', # testFuzzyAMPMProblem
'Meet me at the AM/PM on Sunset at 3:00 AM on December 3rd, 2003', # testFuzzyAMPMProblem
'Meet me at 3:00 AM on December 3rd, 2003 at the AM/PM on Sunset', # testFuzzyAMPMProblem
'Jan 29, 1945 14:45 AM I going to see you there?', # testFuzzyIgnoreAMPM
'2017-07-17 06:15:', # test_idx_check
],
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Context: https://github.com/serde-rs/serde/issues/2538
As other projects are investigating, this should pin serde to the last
stable release before binary requirements were introduced.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates some `Example` tests so that they work again. The only
one I couldn't figure out is the one in the `filter` command. It should
work but does not. However, I left the test in because it's valuable, it
just has a `None` result. I'd like to fix this but I'm not sure how.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Description
This PR allows ints to be used as cell paths.
### Before
```nushell
❯ let index = 0
❯ locations | select $index
Error: nu:🐚:cant_convert
× Can't convert to cell path.
╭─[entry #26:1:1]
1 │ locations | select $index
· ───┬──
· ╰── can't convert int to cell path
╰────
```
### After
```nushell
❯ let index = 0
❯ locations | select $index
╭#┬───────location────────┬city_column┬state_column┬country_column┬lat_column┬lon_column╮
│0│http://ip-api.com/json/│city │region │countryCode │lat │lon │
╰─┴───────────────────────┴───────────┴────────────┴──────────────┴──────────┴──────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
-
https://discord.com/channels/601130461678272522/614593951969574961/1141009665266831470
# Description
this PR
- prints a colorful warning when a user uses either `--format` or
`--list` on `into datetime`
- does NOT remove the features for now, i.e. the two options still work
- redirect to the `format date` command instead
i propose to
- land this now
- prepare a removal PR right after this
- land the removal PR in between 0.84 and 0.85
# User-Facing Changes
`into datetime --format` and `into datetime --list` will be deprecated
in 0.85.
## how it looks
- `into datetime --list` in the REPL
```nushell
> into datetime --list | first
Error: × Deprecated option
╭─[entry #1:1:1]
1 │ into datetime --list | first
· ──────┬──────
· ╰── `into datetime --list` is deprecated and will be removed in 0.85
╰────
help: see `format datetime --list` instead
╭───────────────┬────────────────────────────────────────────╮
│ Specification │ %Y │
│ Example │ 2023 │
│ Description │ The full proleptic Gregorian year, │
│ │ zero-padded to 4 digits. │
╰───────────────┴────────────────────────────────────────────╯
```
- `into datetime --list` in a script
```nushell
> nu /tmp/foo.nu
Error: × Deprecated option
╭─[/tmp/foo.nu:4:1]
4 │ #
5 │ into datetime --list | first
· ──────┬──────
· ╰── `into datetime --list` is deprecated and will be removed in 0.85
╰────
help: see `format datetime --list` instead
╭───────────────┬────────────────────────────────────────────╮
│ Specification │ %Y │
│ Example │ 2023 │
│ Description │ The full proleptic Gregorian year, │
│ │ zero-padded to 4 digits. │
╰───────────────┴────────────────────────────────────────────╯
```
- `help into datetime`
# Tests + Formatting
# After Submitting
# Description
As described in https://github.com/nushell/nushell/issues/9912, the
`http` command could display the request headers with the `--full` flag,
which could help in debugging the requests. This PR adds such
functionality.
# User-Facing Changes
If `http get` or other `http` command which supports the `--full` flag
is invoked with the flag, it used to display the `headers` key which
contained an table of response headers. Now this key contains two nested
keys: `response` and `request`, each of them being a table of the
response and request headers accordingly.
# Description
This PR enables `select` to take a constructed list of columns as a
variable.
```nushell
> let cols = [name type];[[name type size]; [Cargo.toml toml 1kb] [Cargo.lock toml 2kb]] | select $cols
╭#┬───name───┬type╮
│0│Cargo.toml│toml│
│1│Cargo.lock│toml│
╰─┴──────────┴────╯
```
and rows
```nushell
> let rows = [0 2];[[name type size]; [Cargo.toml toml 1kb] [Cargo.lock toml 2kb] [file.json json 3kb]] | select $rows
╭#┬───name───┬type┬size╮
│0│Cargo.toml│toml│1kb │
│1│file.json │json│3kb │
╰─┴──────────┴────┴────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
In the past we named the process of completely removing a command and
providing a basic error message pointing to the new alternative
"deprecation".
But this doesn't match the expectation of most users that have seen
deprecation _warnings_ that alert to either impending removal or
discouraged use after a stability promise.
# User-Facing Changes
Command category changed from `deprecated` to `removed`
# Description
- Add identity cast to `into decimal` (float->float)
- Correct `into decimal` output to concrete float
# User-Facing Changes
`1.23 | into decimal` will now work.
By fixing the output type it can now be used in conjunction with
commands that expect `float`/`list<float>`
# Tests + Formatting
Adapts example to do identity cast and heterogeneous cast
# Description
This may be easy to find/confuse with `drop`
# User-Facing Changes
Users coming from SQL will be happier when using `help -f` or `F1`
# Tests + Formatting
None
Closes https://github.com/nushell/nushell/issues/9910
I noticed that`watch` was not catching all filesystem changes, because
some are reported as `ModifyKind::Data(DataChange::Any)` and we were
only handling `ModifyKind::Data(DataChange::Content)`. Easy fix.
This was happening on Ubuntu 23.04, ext4.
# Description
This PR does three related changes:
* Keeps the originally declared name in help outputs.
* Updates the name of the commands called `main` in the user script to
the name of the script.
* Fixes the source of signature information in multiple places. This
allows scripts to have more complete help output.
Combined, the above allow the user to see the script name in the help
output of scripts, like so:
NOTE: You still declare and call the definition `main`, so from inside
the script `main` is still the correct name. But multiple folks agreed
that seeing `main` in the script help was confusing, so this PR changes
that.
# User-Facing Changes
One potential minor breaking change is that module renames will be shown
as their originally defined name rather than the renamed name. I believe
this to be a better default.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Those two commands are very complementary to `into duration` and `into
filesize` when you want to coerce a particular string output.
This keeps the old `format` command with its separate formatting syntax
still in `nu-cmd-extra`.
# User-Facing Changes
`format filesize` is back accessible with the default build. The new
`format duration` command is also available to everybody
# Tests + Formatting
# Description
in its documentation, `input list` says it only accepts the following
signatures
- `list<any> -> list<any>`
- `list<string> -> string`
however this is incorrect as the following is allowed and even in the
help page
```nushell
[1 2 3] | input list # -> returns an `int`
```
this PR fixes the signature of `input list`.
- with no option or `--fuzzy`, `input list` takes a `list<any>` and
outputs a single `any`
- with `--multi`, `input list` takes a `list<any>` and outputs a
`list<any>`
# User-Facing Changes
the input output signature of `input list` is now
```
╭───┬───────────┬───────────╮
│ # │ input │ output │
├───┼───────────┼───────────┤
│ 0 │ list<any> │ list<any> │
│ 1 │ list<any> │ any │
╰───┴───────────┴───────────╯
```
# Tests + Formatting
this shouldn't change anything as `[1 2 3] | input list` already works.
# After Submitting
should close https://github.com/nushell/nushell/issues/9965
# Description
this PR implements the `todo!()` left in `lines`.
# User-Facing Changes
### before
```nushell
> open . | lines
thread 'main' panicked at 'not yet implemented', crates/nu-command/src/filters/lines.rs:248:35
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
### after
```nushell
> open . | lines
Error: nu:🐚:io_error
× I/O error
help: Is a directory (os error 21)
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
this PR adds the `lines_on_error` test to make sure this does not happen
again 😌
# After Submitting
related to
- https://github.com/nushell/nushell/pull/9935
# Description
this PR just adds a test to make sure type annotations in `def`s show as
`nothing` in the help pages of commands.
# User-Facing Changes
# Tests + Formatting
adds a new test `nothing_type_annotation`.
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
-->
# Description
This PR implements the workaround discussed in #9795, i.e. having
`parse` collect an external stream before operating on it with a regex.
- Should close#9795
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- `parse` will give the correct output for external streams
- increased memory and time overhead due to collecting the entire stream
(no short-circuiting)
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- formatting is checked
- clippy is happy
- no tests that weren't already broken fail
- added test case
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
This PR should close#8036, #9028 (in the negative) and #9118.
Fix for #9118 is a bit pedantic. As reported, the issue is:
```
> 2023-05-07T04:08:45+12:00 - 2019-05-10T09:59:12+12:00
3yr 12month 2day 18hr 9min 33sec
```
with this PR, you now get:
```
> 2023-05-07T04:08:45+12:00 - 2019-05-10T09:59:12+12:00
208wk 1day 18hr 9min 33sec
```
Which is strictly correct, but could still fairly be called "weird date
arithmetic".
# Description
* [x] Abide by constraint that Value::Duration remains a number of
nanoseconds with no additional fields.
* [x] `to_string()` only displays weeks .. nanoseconds. Duration doesn't
have base date to compute months or years from.
* [x] `duration | into record` likewise only has fields for weeks ..
nanoseconds.
* [x] `string | into duration` now accepts compound form of duration
to_string() (e.g '2day 3hr`, not just '2day')
* [x] `duration | into string` now works (and produces the same
representation as to_string(), which may be compound).
# User-Facing Changes
## duration -> string -> duration
Now you can "round trip" an arbitrary duration value: convert it to a
string that may include multiple time units (a "compound" value), then
convert that string back into a duration. This required changes to
`string | into duration` and the addition of `duration | into string'.
```
> 2day + 3hr
2day 3hr # the "to_string()" representation (in this case, a compound value)
> 2day + 3hr | into string
2day 3hr # string value
> 2day + 3hr | into string | into duration
2day 3hr # round-trip duration -> string -> duration
```
Note that `to nuon` and `from nuon` already round-tripped durations, but
use a different string representation.
## potentially breaking changes
* string rendering of a duration no longer has 'yr' or 'month' phrases.
* record from `duration | into record` no longer has 'year' or 'month'
fields.
The excess duration is all lumped into the `week` field, which is the
largest time unit you can
convert to without knowing the datetime from which the duration was
calculated.
Scripts that depended on month or year time units on output will need to
be changed.
### Examples
```
> 365day
52wk 1day
## Used to be:
## 1yr
> 365day | into record
╭──────┬────╮
│ week │ 52 │
│ day │ 1 │
│ sign │ + │
╰──────┴────╯
## used to be:
##╭──────┬───╮
##│ year │ 1 │
##│ sign │ + │
##╰──────┴───╯
> (365day + 4wk + 5day + 6hr + 7min + 8sec + 9ms + 10us + 11ns)
56wk 6day 6hr 7min 8sec 9ms 10µs 11ns
## used to be:
## 1yr 1month 3day 6hr 7min 8sec 9ms 10µs 11ns
## which looks reasonable, but was actually only correct in 75% of the years and 25% of the months in the last 4 years.
> (365day + 4wk + 5day + 6hr + 7min + 8sec + 9ms + 10us + 11ns) | into record
╭─────────────┬────╮
│ week │ 56 │
│ day │ 6 │
│ hour │ 6 │
│ minute │ 7 │
│ second │ 8 │
│ millisecond │ 9 │
│ microsecond │ 10 │
│ nanosecond │ 11 │
│ sign │ + │
╰─────────────┴────╯
```
Strictly speaking, these changes could break an existing user script.
Losing years and months as time units is arguably a regression in
behavior.
Also, the corrected duration calculation could break an existing script
that was calibrated using the old algorithm.
# Tests + Formatting
```
> toolkit check pr
```
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Bob Hyman <bobhy@localhost.localdomain>
# Description
This PR adds back the functionality to auto-expand tables based on the
terminal width, using the logic that if the terminal is over 100 columns
to expand.
This sets the default config value in both the Rust and the default
nushell config.
To do so, it also adds back the ability for hooks to be strings of code
and not just code blocks.
Fixed a couple tests: two which assumed that the builtin display hook
didn't use a table -e, and one that assumed a hook couldn't be a string.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Signatures in `help commands` will now have more structure for params
and input/output pairs.
Example:
Improved params
Improved input/output pairs
# User-Facing Changes
This is technically a breaking change if previous code assumed the shape
of things in `help commands`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes `Value::columns` to return a slice of columns instead of
cloning said columns. If the caller needs an owned copy, they can use
`slice::to_vec` or the like. This eliminates unnecessary Vec clones
(e.g., in `update cells`).
# User-Facing Changes
Breaking change for `nu_protocol` API.
* histogram to chart
* version to core
This completes moving commands out of the *Default* category...
When you run
```rust
nu -n --no-std-lib
```
```rust
help commands | where category == "default"
```
You now get an *Empty List* 😄
The following *Filters* commands were incorrectly in the category
*Default*
* group-by
* join
* reduce
* split-by
* transpose
This continues the effort of moving commands out of default and into
their proper category...
@jntrnr and I discussed the fact that we can now *graduate* nuon to be a
first class citizen...
This PR moves
* from nuon
* to nuon
out of the *experimental* stage and into *formats*
In an effort to go through and review all of the remaining commands to
find anything else that could possibly
be moved to *nu-cmd-extra*
I noticed that there are still some commands that have not been
categorized...
I am going to *Categorize* the remaining commands that still *do not
have Category homes*
In PR land I will call this *Categorification* as a play off of
*Cratification*
* str substring
* str trim
* str upcase
were in the *default* category because for some reason they had not yet
been categorized.
I went ahead and moved them to the
```rust
.category(Category::Strings)
```
I am moving the following str case commands to nu-cmd-extra (as
discussed in the core team meeting the other day)
* camel-case
* kebab-case
* pascal-case
* screaming-snake-case
* snake-case
* title-case
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #issue
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently `parse` acts like a `.filter` over an iterator, except that it
emits `None` for elements that can't be parsed. This causes consumers of
the adapted iterator to stop iterating too early. The correct behaviour
is to keep pulling the inner iterator until either the end of it is
reached or an element can be parsed.
- this PR should close#9906
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
List streams won't be truncated anymore after the first parse failure.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- [-] `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass
- 11 tests fail, but the same 11 tests fail on main as well
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Currently, foreground process management is disabled for macOS, since
the original code had issues (see #7068).
This PR re-enables process management on macOS in combination with the
changes from #9693.
# User-Facing Changes
Fixes hang on exit for nested nushells on macOS (issue #9859). Nushell
should now manage processes in the same way on macOS and other unix
systems.
# Description
This PR changes the signature of the deprecated command `let-env` so
that it does not mislead people when invoking it without parameters.
### Before
```nushell
> let-env
Error: nu::parser::missing_positional
× Missing required positional argument.
╭─[entry #2:1:1]
1 │ let-env
╰────
help: Usage: let-env <var_name> = <initial_value>
```
### After
```nushell
❯ let-env
Error: nu:🐚:deprecated_command
× Deprecated command let-env
╭─[entry #1:1:1]
1 │ let-env
· ───┬───
· ╰── 'let-env' is deprecated. Please use '$env.<environment variable> = ...' instead.
╰────
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
fix#9796
Sorry that you've had the issues.
I've actually encountered them yesterday too (seems like they have
appeared after some refactoring in the middle) but was not able to fix
that rapid.
Created a bunch of tests.
cc: @fdncred
Note:
This option will be certainly slower then a default ones. (could be
fixed but ... maybe later).
Maybe it shall be cited somewhere.
PS: Haven't tested on a wrapped/expanded tables.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Reverts nushell/nushell#9796
This is just draft since we're seeing some issues with the latest fixes
to table drawing that just landed with #9796. We're hoping to get these
fixed, but if we're not able to fix them before the next release, we'll
need to revert (hence this PR, just in case we need it).
A patch to play with.
Need to make a few tests after all.
The question is what shall be done with `table.mode = none`, as it has
no borders.
```nu
$env.config.table.move_header = true
```
cc: @fdncred
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Closes: #9891
I also think it's good to keep command name consistency.
And moving `date format` to deprecated.
# User-Facing Changes
Running `date format` will lead to deprecate message:
```nushell
❯ "2021-10-22 20:00:12 +01:00" | date format
Error: nu:🐚:deprecated_command
× Deprecated command date format
╭─[entry #28:1:1]
1 │ "2021-10-22 20:00:12 +01:00" | date format
· ─────┬─────
· ╰── 'date format' is deprecated. Please use 'format date' instead.
╰────
```
# Description
This PR updates the signature of `format` to allow records to be passed
in.
Closes#9897
### Before
```nushell
{name: Downloads} | format "{name}"
× Command does not support record<name: string> input.
╭─[entry #12:1:1]
1 │ {name: Downloads} | format "{name}"
· ───┬──
· ╰── command doesn't support record<name: string> input
╰────
```
### After
```nushell
{name: Downloads} | format "{name}"
Downloads
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the `items` command to allow `any` output. items takes a
closure so theoretically, any value type of output could be valid.
### Before
```nushell
{a: 1 b: 2} | items {|k,v| {key: $k value: $v}} | transpose
Error: nu::parser::input_type_mismatch
× Command does not support list<string> input.
╭─[entry #2:1:1]
1 │ {a: 1 b: 2} | items {|k,v| {key: $k value: $v}} | transpose
· ────┬────
· ╰── command doesn't support list<string> input
╰────
```
### After
```nushell
❯ {a: 1 b: 2} | items {|k,v| {key: $k value: $v}} | transpose
╭───┬─────────┬─────────┬─────────╮
│ # │ column0 │ column1 │ column2 │
├───┼─────────┼─────────┼─────────┤
│ 0 │ key │ a │ b │
│ 1 │ value │ 1 │ 2 │
╰───┴─────────┴─────────┴─────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the `char` command to allow `Table` output due to the
`--list` parameter.
### Before
```nushell
char --list | transpose
Error: nu::parser::input_type_mismatch
× Command does not support string input.
╭─[entry #6:1:1]
1 │ char --list | transpose
· ────┬────
· ╰── command doesn't support string input
╰────
```
### After
```nushell
❯ char --list | transpose
╭───┬───────────┬─────────┬─────────┬─────────┬───────────┬─────────┬─────────────┬─────────┬─────────┬─────────┬──────────┬──────────┬──────────┬────────────┬──────────┬─────────────┬──────────┬────────────┬──────────┬──────────┬─────╮
│ # │ column0 │ column1 │ column2 │ column3 │ column4 │ column5 │ column6 │ column7 │ column8 │ column9 │ column10 │ column11 │ column12 │ column13 │ column14 │ column15 │ column16 │ column17 │ column18 │ column19 │ ... │
├───┼───────────┼─────────┼─────────┼─────────┼───────────┼─────────┼─────────────┼─────────┼─────────┼─────────┼──────────┼──────────┼──────────┼────────────┼──────────┼─────────────┼──────────┼────────────┼──────────┼──────────┼─────┤
│ 0 │ name │ newline │ enter │ nl │ line_feed │ lf │ carriage_re │ cr │ crlf │ tab │ sp │ space │ pipe │ left_brace │ lbrace │ right_brace │ rbrace │ left_paren │ lp │ lparen │ ... │
│ │ │ │ │ │ │ │ turn │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
│ 1 │ character │ │ │ │ │ │ │ │ │ │ │ │ | │ { │ { │ } │ } │ ( │ ( │ ( │ ... │
│ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
│ 2 │ unicode │ a │ a │ a │ a │ a │ d │ d │ d a │ 9 │ 20 │ 20 │ 7c │ 7b │ 7b │ 7d │ 7d │ 28 │ 28 │ 28 │ ... │
╰───┴───────────┴─────────┴─────────┴─────────┴───────────┴─────────┴─────────────┴─────────┴─────────┴─────────┴──────────┴──────────┴──────────┴────────────┴──────────┴─────────────┴──────────┴────────────┴──────────┴──────────┴─────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This reverts #9693 as it lead to CPU hangs. (btw, did the revert by hand
as it couldn't be done automatically. Hopefully I didn't miss anything 😅
)
Fixes#9859
cc @IanManske
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`Span` is `Copy`, so we probably should not be passing references of
`Span` around. This PR replaces all instances of `&Span` with `Span`,
copying spans where necessary.
# User-Facing Changes
This alters some public functions to take `Span` instead of `&Span` as
input. Namely, `EngineState::get_span_contents`,
`nu_protocol::extract_value`, a bunch of the math commands, and
`Gstat::gstat`.
# Description
See also: #9743
Before:
`http <subcommand> -H` took a list in the form:
```nushell
[my-header-key-A my-header-value-A my-header-key-B my-header-value-B]
```
Now:
In addition to the old format, Records can be passed, For example,
```nushell
> let reqHeaders = {
Cookie: "acc=barfoo",
User-Agent: "Mozilla/7.0 (Windows NT 33.0; Win64; x64) AppleWebKit/1038.90 (KHTML, like Gecko)"
}
> http get -H $reqHeaders https://example.com
```
is now equivalent to
```nushell
http get -H [Cookie "acc=barfoo" User-Agent "Mozilla/7.0 (Windows NT 33.0; Win64; x64) AppleWebKit/1038.90 (KHTML, like Gecko)"] https://example.com
```
# User-Facing Changes
No breaking changes, but Records can now also be passed to `http
<subcommand> -H`.
# Tests + Formatting
# After Submitting
# Description
Add `format duration` cmd to choose output unit.
This takes the previous `into duration --convert ...` behavior which
returned a string into its own `format duration` command.
This was suprising and not fitting with the general type signature for
the `into ...` commands.
This command for now lives in the `nu-cmd-extra` nursery.
# User-Facing Changes
## Breaking change
Removes formatting behavior from `into duration`
Now use `format duration` instead of `into duration --convert`
## Usage:
```
1sec | format duration us # Output data in microseconds
"2ms" | into duration | format duration sec # go from string to string
```
# Tests + Formatting
Basic example testing (including basic broadcast)
This command will always return a list, either because there are
multiple entries with the same frequency or just one.
It's implementation doesn't care about the composition of types as long
as they are number like, can be heterogeneous, will report
independently.
Work for #9812
Still support forming the median over homogeneous lists of `Duration` or
`Filesize`. Don't advertise `list<any>` as this can become funky when
given an even number of elements...
Work for #9812
# Description
Under the hood those are just `Value::partial_cmp` and this is defined
for all values and defines a partial order over `any`
Should address part of https://github.com/nushell/nushell/issues/9813
# User-Facing Changes
Reenable all behavior before `0.83`
# Tests + Formatting
Added an example to `math min` showing this cursedness
# Description
As the typechecker doesn't currently support having the same input type
but two different output types, collapse the `transpose` input/output
signatures for now so that we don't mistakenly think that when given a
`table` a `table is always returned.
fixes https://github.com/nushell/nushell/issues/9710
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
More narrow attempt than #9740
This doesn't cause issues with the current `test_examples`
infrastructure.
But allows the output of those clearly integer producing commands to be
used with functions declaring `list<int>` or `int`
# User-Facing Changes
see above
# Tests + Formatting
None
related to
https://discord.com/channels/601130461678272522/1134054657086464072
# Description
the `enumerate` command always returns a table but its signature is `any
-> any` which can be confusing 😕
this PR changes the signature to `any -> table`
i've double checked and the source of `enumerate` returns a list of
records, a.k.a. a table 👌
# User-Facing Changes
this shouldn't change anything apart from the help page of `enumerate`
showing now
```
Input/output types:
╭───┬───────┬────────╮
│ # │ input │ output │
├───┼───────┼────────┤
│ 0 │ any │ table │
╰───┴───────┴────────╯
```
instead of
```
Input/output types:
╭───┬───────┬────────╮
│ # │ input │ output │
├───┼───────┼────────┤
│ 0 │ any │ any │
╰───┴───────┴────────╯
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
# Description
This command also flat-maps and doesn't create a table like `split
column`
We should probably reconsider the flatmap behavior like in #9739
but for the #9812 hotfix this is an unwelcome breaking change.
# User-Facing Changes
None
# Tests + Formatting
- Fix signature of `split row`
- Add test for output signature
# Description
This PR does two (somewhat related) things:
* Fixes the `prepend` signature in the same way we fixed `append`
* Fixes a few typos in the examples of `prepend` and `append`
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes this not working `ansi --list | columns`. I originally
thought that this was a problem with `columns` but it turned out to be a
problem with the input output type of `ansi`. Since `ansi` was only
allowed to return strings, `columns` thought it was getting a string,
but it was a table.
closes#9808
tracking #9812
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
With the current typechecking logic this property has no effect.
It was only used in the example testing, and provided some indication of
this vectorizing property.
With #9742 all commands that previously declared it have explicit list
signatures. If we want to get it back in the future we can reconstruct
it from the signature.
Simplifies the example testing a bit.
# User-Facing Changes
Causes a breaking change for plugins that previously declared it. While
this causes a compile fail, this was already broken by our more
stringent type checking.
This will be a good reminder for plugin authors to update their
signature as well to reflect the more stringent type checking.
# Description
The same procedure as for #9778 repeated for records.
# User-Facing Changes
Commands that directly supported applying their work directly to record
fields via cell paths, that worked before #9680 will now work again
# Tests + Formatting
Tried to limit the need to add new `.allow_variants_without_examples()`
by adjusting or adding tests to also use some records with access.
# Description
This bumps nushell to the dev version of 0.83.1 and updates the default
config files with the proper version.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Bump 0.83
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Reallow the commands that take cellpaths as rest parameters to operate
on table input data.
Went through all commands returned by
```
scope commands |
filter { |cmd| $cmd.signatures |
values |
any {|sig| $sig |
any {|$sig| $sig.parameter_type == rest and $sig.syntax_shape ==
cellpath }
}
} | get name
```
Only exception to that was `is-empty` that returns a bool.
# User-Facing Changes
Same table operations as in `0.82` should still be possible
Mitigates effects of #9680
# Description
Those two commands did *not* vectorize over the input in the pure sense
as they performed a flat map. Now they return a list for each string
that gets split by them.
```
["foo" "bar"] | split chars
```
## Before
```
╭───┬───╮
│ 0 │ f │
│ 1 │ o │
│ 2 │ o │
│ 3 │ b │
│ 4 │ a │
│ 5 │ r │
╰───┴───╯
```
## After
```
╭───┬───────────╮
│ 0 │ ╭───┬───╮ │
│ │ │ 0 │ f │ │
│ │ │ 1 │ o │ │
│ │ │ 2 │ o │ │
│ │ ╰───┴───╯ │
│ 1 │ ╭───┬───╮ │
│ │ │ 0 │ b │ │
│ │ │ 1 │ a │ │
│ │ │ 2 │ r │ │
│ │ ╰───┴───╯ │
╰───┴───────────╯
```
# Description
All commands that declared `.vectorizes_over_list(true)` now also
explicitly declare the list form of their scalar types.
- Explicit in/out list signatures for nu-command
- Explicit in/out list signatures for nu-cmd-extra
- Add comments about cellpath behavior that is still unresolved
# User-Facing Changes
Our type signatures will now be more explicit about which commands
support vectorization over lists.
On the downside this is a bit more verbose and less systematic.
# Description
Don't just use `List<Any>`, be precise for the vectorized form as well.
# User-Facing Changes
More explicit albeit verbose type information in the signature
should close https://github.com/nushell/nushell/issues/9774
# Description
given the help page of `into datetime`,
```
Parameters:
...rest <cellpath>: for a data structure input, convert data at the given cell paths
```
it looks like `into datetime` should accept tables as input 🤔
this PR
- adds the `table -> table` signature to `into datetime`
- adds a test to make sure the behaviour stays there
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR is related to **Tests: clean up unnecessary use of cwd,
pipeline(), etc.
[#8670](https://github.com/nushell/nushell/issues/8670)**
- Removed the `r#"..."#` raw string literal syntax, which is unnecessary
when there are no special characters that need quoting from the tests
that use the `nu!` macro.
- `cwd:` and `pipeline()` has not changed
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
fix `detect columns` with flag `-c, --combine-columns` run failed when
using some range
- fixes#9653fix#9653 the cmd detect columns with the flag -c, --combine-columns run
failed when using some range.
add unit test for the command `detect columns`
```text
Attempt to automatically split text into multiple columns.
Usage:
> detect columns {flags}
Flags:
-h, --help - Display the help message for this command
-s, --skip <Int> - number of rows to skip before detecting
-n, --no-headers - don't detect headers
-c, --combine-columns <Range> - columns to be combined; listed as a range
Signatures:
<string> | detect columns -> <table>
Examples:
Splits string across multiple columns
> 'a b c' | detect columns -n
╭───┬─────────┬─────────┬─────────╮
│ # │ column0 │ column1 │ column2 │
├───┼─────────┼─────────┼─────────┤
│ 0 │ a │ b │ c │
╰───┴─────────┴─────────┴─────────╯
Splits a multi-line string into columns with headers detected
> $'c1 c2 c3 c4 c5(char nl)a b c d e' | detect columns
╭───┬────┬────┬────┬────┬────╮
│ # │ c1 │ c2 │ c3 │ c4 │ c5 │
├───┼────┼────┼────┼────┼────┤
│ 0 │ a │ b │ c │ d │ e │
╰───┴────┴────┴────┴────┴────╯
> $'c1 c2 c3 c4 c5(char nl)a b c d e' | detect columns -c 0..1
╭───┬─────┬────┬────┬────╮
│ # │ c1 │ c3 │ c4 │ c5 │
├───┼─────┼────┼────┼────┤
│ 0 │ a b │ c │ d │ e │
╰───┴─────┴────┴────┴────╯
Splits a multi-line string into columns with headers detected
> $'c1 c2 c3 c4 c5(char nl)a b c d e' | detect columns -c -2..-1
╭───┬────┬────┬────┬─────╮
│ # │ c1 │ c2 │ c3 │ c4 │
├───┼────┼────┼────┼─────┤
│ 0 │ a │ b │ c │ d e │
╰───┴────┴────┴────┴─────╯
Splits a multi-line string into columns with headers detected
> $'c1 c2 c3 c4 c5(char nl)a b c d e' | detect columns -c 2..
╭───┬────┬────┬───────╮
│ # │ c1 │ c2 │ c3 │
├───┼────┼────┼───────┤
│ 0 │ a │ b │ c d e │
╰───┴────┴────┴───────╯
Parse external ls command and combine columns for datetime
> ^ls -lh | detect columns --no-headers --skip 1 --combine-columns 5..7
```
# Description
This PR ensures functions exist to extract and create each and every
`Value` case. It also renames `Value::boolean` to `Value::bool` to match
`Value::test_bool`, `Value::as_bool`, and `Value::Bool`. Similarly,
`Value::as_integer` was renamed to `Value::as_int` to be consistent with
`Value::int`, `Value::test_int`, and `Value::Int`. These two renames can
be undone if necessary.
# User-Facing Changes
No user facing changes, but two public functions were renamed which may
affect downstream dependents.
I added a new capability to `bracoxide` which is for `brace expansion`
(it's almost like bash brace expressions).
Anyway, this change adds this capability:
`A{,B,C} | str expand`, returns:
```md
- A
- AB
- AC
```
`A{B,,C} | str expand`, returns:
```md
- AB
- A
- AC
```
`A{B,C,} | str expand`, returns:
```md
- AB
- AC
- A
```
Updated examples, according to the new feature.
# Description
in the help page of `metadata`, there is the following example
```nushell
ls | metadata
```
which gives the following error
```
Error: nu::parser::input_type_mismatch
× Command does not support table input.
╭─[entry #2:1:1]
1 │ ls | metadata
· ────┬───
· ╰── command doesn't support table input
╰────
```
this PR adds `any -> record` to the signatures of `metadata` to allow
the use of that kind of example.
# User-Facing Changes
`ls | metadata` will work again
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
this PR should close#9624
# Description
Fixes the `rm` command assuming that a symlink is a directory and trying
to delete the directory as opposed to unlinking the symlink.
Should probably be tested on linux before merge.
Added tests for deleting symlinks
# Description
This PR helps the sqlite handling better by surrounding table names with
brackets. This makes it easier to have table names with spaces like
`Basin / profile`.
Closes#9751
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #8517Fixes: #9246Fixes: #9709
Relative: #9723
## About the change
Before the pr, nushell only parse redirection target as a string(through
`parse_string` call).
In the pr, I'm trying to make the value more generic(using `parse_value`
with `SyntaxShape::Any`)
And during eval stage, we guard it to only eval `String`,
`StringInterpolation`, `FullCellPath`, `FilePath`, so other type of
redirection target like `1ms` won't be permitted.
# User-Facing Changes
After the pr: redirection support something like the following:
1. `let a = "x"; cat toolkit.nu o> $a`
2. `let a = "x"; cat toolkit.nu o> $"($a).txt"`
3. `cat toolkit.nu out> ("~/a.txt" | path expand)`
# Description
Thie PR adds `Type::Range` input to `par-each` to allow `1..3 | do
something` again.
closes#9748
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related PRs and issues
- supersedes https://github.com/nushell/nushell/pull/9633
- should close https://github.com/nushell/nushell/issues/9630
# Description
this PR updates the `default_config.nu` config file and the `config.rs`
module in `nu_protocol` so that the default behaviour of Nushell,
without any config, and the one with `default_config.nu` and
`default_env.nu` are the same.
## changelog
- 3e2bfc9bb: copy the structure of `default_config.nu` inside the
implementation of `Default` in the `config.rs` module for easier check
of the default values
- e25e5ccd6: sync all the *simple* config fields, i.e. the
non-structured ones
- ae7e8111c: set the `display_output` hook to always run `table`
- a09a1c564: leave only the default menus => i've removed
`commands_menu`, `vars_menu` and `commands_with_description`
## todo
- [x] ~~check the defaults in `$env.config.explore`~~ done in 173bdbba5
and b9622084c
- [x] ~~check the defaults in `$env.config.color_config`~~ done in
c411d781d => the theme is now `{}` by default so that it's the same as
the default one with `--no-config`
- [x] ~~check the defaults `$env.config.keybindings`~~ done in 715a69797
- already available with the selected mode: `completion_previous`,
`next_page`, `undo_or_previous_page`, `yank`, `unix-line-discard` and
`kill-line`, e.g. in *vi* mode, `unlix-line-discard` is done in NORMAL
mode with either `d0` from the end of the line or `dd` from anywhere in
the line and `kill-line` is done in NORMAL mode with `shift + d`. these
bindings are available by default in *emacs* mode as well.
- previously with removed custom menus: `commands_menu`, `vars_menu` and
`commands_with_description`
- [x] ~~check `$env.config.datetime_format`~~ done in 0ced6b8ec => as
there is no *human* format for datetimes, i've commented out both
`$env.config.datetime_format` fields
- [x] ~~fix `default_env.nu`~~ done in 67c215011
# User-Facing Changes
this should not change anything, just make sure the default behaviour of
Nushell and the `default_config.nu` are in sync.
# Tests + Formatting
# After Submitting
# Description
This PR tries to remove `is-root` crate.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Fixes a regression from #9681 where nushell will attempt to place itself
into the background or take control of the terminal even in
non-interactive mode.
Using the same
[reference](https://www.gnu.org/software/libc/manual/html_node/Initializing-the-Shell.html)
from #6584:
>A subshell that runs *interactively* has to ensure that it has been
placed in the foreground...
>A subshell that runs *non-interactively* cannot and should not support
job control.
`fish`
[code](54fa1ad6ec/src/reader.cpp (L4862))
also seems to follow this.
This *partially* fixes
[9026](https://github.com/nushell/nushell/issues/9026). That is, nushell
will no longer set the foreground process group in non-interactive mode.
# Description
The working directory doesn't have to be set for those tests (or would
be the default anyways). When appropriate also remove calls to the
`pipeline()` function. In most places kept the diff minimal and only
removed the superfluous part to not pollute the blame view. With simpler
tests also simplified things to make them more readable overall (this
included removal of the raw string literal).
Work for #8670
# Description
This PR allows `Type::Range` on the `filter` command so you can do
things like this:
```nushell
❯ 9..17 | filter {|el| $el mod 2 != 0}
╭───┬────╮
│ 0 │ 9 │
│ 1 │ 11 │
│ 2 │ 13 │
│ 3 │ 15 │
│ 4 │ 17 │
╰───┴────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
i have the following command that should give a table of all the mounted
devices with information about their sizes, etc, etc... a glorified
output for the `df -h` command:
```nushell
def disk [] {
df -h
| str replace "Mounted on" "Mountpoint"
| detect columns
| rename filesystem size used avail used% mountpoint
| into filesize size used avail
| upsert used% {|it| 100 * (1 - $it.avail / $it.size)}
}
```
this should work given the first example of `into filesize`
```nushell
Convert string to filesize in table
> [[bytes]; ['5'] [3.2] [4] [2kb]] | into filesize bytes
```
## before this PR
it does not even parse
```nushell
Error: nu::parser::input_type_mismatch
× Command does not support table input.
╭─[entry #1:5:1]
5 │ | rename filesystem size used avail used% mountpoint
6 │ | into filesize size used avail
· ──────┬──────
· ╰── command doesn't support table input
7 │ | upsert used% {|it| 100 * (1 - $it.avail / $it.size)}
╰────
```
> **Note**
> this was working before the recent input / output type changes
## with this PR
it parses again and gives
```nushell
> disk | where mountpoint == "/" | into record
╭────────────┬───────────────────╮
│ filesystem │ /dev/sda2 │
│ size │ 217.9 GiB │
│ used │ 158.3 GiB │
│ avail │ 48.4 GiB │
│ used% │ 77.77777777777779 │
│ mountpoint │ / │
╰────────────┴───────────────────╯
```
> **Note**
> the two following commands also work now and did not before the PR
> ```nushell
> ls | insert name_size {|it| $it.name | str length} | into filesize
name_size
> ```
> ```nushell
> [[device size]; ["/dev/sda1" 200] ["/dev/loop0" 50]] | into filesize
size
> ```
# User-Facing Changes
`into filesize` works back with tables and this effectively fixes the
doc.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
this PR gives a `result` back to the first table example to make sure it
works fine.
# After Submitting
## description
this pr adds [match
guards](https://doc.rust-lang.org/reference/expressions/match-expr.html#match-guards)
to match patterns
```nushell
match $x {
_ if $x starts-with 'nu' => {},
$x => {}
}
```
these work pretty much like rust's match guards, with few limitations:
1. multiple matches using the `|` are not (yet?) supported
```nushell
match $num {
0 | _ if (is-odd $num) => {},
_ => {}
}
```
2. blocks cannot be used as guards, (yet?)
```nushell
match $num {
$x if { $x ** $x == inf } => {},
_ => {}
}
```
## checklist
- [x] syntax
- [x] syntax highlighting[^1]
- [x] semantics
- [x] tests
- [x] clean up
[^1]: defered for another pr
# Description
This adds input/output types to custom commands. These are input/output
pairs that related an input type to an output type.
For example (a single int-to-int input/output pair):
```
def foo []: int -> int { ... }
```
You can also have multiple input/output pairs:
```
def bar []: [int -> string, string -> list<string>] { ... }
```
These types are checked during definition time in the parser. If the
block does not match the type, the user will get a parser error.
This `:` to begin the input/output signatures should immediately follow
the argument signature as shown above.
The PR also improves type parsing by re-using the shape parser. The
shape parser is now the canonical way to parse types/shapes in user
code.
This PR also splits `extern` into `extern`/`extern-wrapped` because of
the parser limitation that a multi-span argument (which Signature now
is) can't precede an optional argument. `extern-wrapped` now takes the
required block that was previously optional.
# User-Facing Changes
The change to `extern` to split into `extern` and `extern-wrapped` is a
breaking change.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Updates `help` to more clearly show input/output types.
Before:
After:
# User-Facing Changes
See above
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes some problems I found in scripts by adding some additional
input_output_types.
Here's a list of nushell scripts that it fixed. Look for `# broke here:`
below.
This PR fixes 3, 4, 6, 7 by adding additional input_output_types. 1 was
fixed by changing the script. 2. just doesn't work anymore because mkdir
return type has changed. 5, is a problem with the script, the datatype
for `...rest` needed to be removed.
```nushell
# 1.
def terminal-size [] {
let sz = (input (ansi size) --bytes-until 'R')
# $sz should look like this
# Length: 9 (0x9) bytes | printable whitespace ascii_other non_ascii
# 00000000: 1b 5b 33 38 3b 31 35 30 52 •[38;150R
let sz_len = ($sz | bytes length)
# let's skip the esc[ and R
let r = ($sz | bytes at 2..($sz_len - 2) | into string)
# $r should look like 38;150
# broke here: because $r needed to be a string for split row
let size = ($r | split row ';')
# output in record syntax
{
rows: ($size | get 0)
columns: ($size | get 1)
}
}
# 2.
# make and cd to a folder
def-env mkcd [name: path] {
# broke here: but apparently doesn't work anymore
# It looks like mkdir returns nothing where it used to return a value
cd (mkdir $name -v | first)
}
# 3.
# changed 'into datetime'
def get-monday [] {
(seq date -r --days 7 |
# broke here: because into datetime didn't support list input
into datetime |
where { |e|
($e | date format %u) == "1" }).0 |
date format "%Y-%m-%d"
}
# 4.
# Delete all branches that are not in the excepts list
# Usage: del-branches [main]
def del-branches [
excepts:list # don't delete branch in the list
--dry-run(-d) # do a dry-run
] {
let branches = (git branch | lines | str trim)
# broke here: because str replace didn't support list<string>
let remote_branches = (git branch -r | lines | str replace '^.+?/' '' | uniq)
if $dry_run {
print "Starting Dry-Run"
} else {
print "Deleting for real"
}
$branches | each {|it|
if ($it not-in $excepts) and ($it not-in $remote_branches) and (not ($it | str starts-with "*")) {
# git branch -D $it
if $dry_run {
print $"git branch -D ($it)"
} else {
print $"Deleting ($it) for real"
#git branch -D $it
}
}
}
}
# 5.
# zoxide script
def-env __zoxide_z [...rest] {
# `z -` does not work yet, see https://github.com/nushell/nushell/issues/4769
# broke here: 'append doesn't support string input'
let arg0 = ($rest | append '~').0
# broke here: 'length doesn't support string input' so change `...rest:string` to `...rest`
let path = if (($rest | length) <= 1) and ($arg0 == '-' or ($arg0 | path expand | path type) == dir) {
$arg0
} else {
(zoxide query --exclude $env.PWD -- $rest | str trim -r -c "\n")
}
cd $path
}
# 6.
def a [] {
let x = (commandline)
if ($x | is-empty) { return }
# broke here: because commandline was previously only returning Type::Nothing
if not ($x | str starts-with "aaa") { print "bbb" }
}
# 7.
# repeat a string x amount of times
def repeat [arg: string, dupe: int] {
# broke here: 'command does not support range input'
0..<$dupe | reduce -f '' {|i acc| $acc + $arg}
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tights input/output type-checking a bit more. There are a lot of
commands that don't have correct input/output types, so part of the
effort is updating them.
This PR now contains updates to commands that had wrong input/output
signatures. It doesn't add examples for these new signatures, but that
can be follow-up work.
# User-Facing Changes
BREAKING CHANGE BREAKING CHANGE
This work enforces many more checks on pipeline type correctness than
previous nushell versions. This strictness may uncover incompatibilities
in existing scripts or shortcomings in the type information for internal
commands.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
The following math commands are being moved to nu-cmd-extra
* e (euler)
* exp
* ln
This should conclude moving the extra math commands as discussed in
yesterday's
core team meeting...
The remaining math commands will stay in nu-command (for now)....
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes: https://github.com/nushell/nushell/issues/9595
So we can do the following in nushell:
```nushell
mut a = 3
$a = if 4 == 3 { 10 } else {20}
```
or
```nushell
$env.BUILD_EXT = match 3 { 1 => { 'yes!' }, _ => { 'no!' } }
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: WindSoilder <windsoilder@DESKTOP-R8GRJ1D.localdomain>
# Description
Until we bump our minimal Rust version to `1.70.0` we can't use
`std::io::IsTerminal`. The crate `is-terminal` (depending on `rustix` or
`windows-sys`) can provide the same.
Get's rid of the dependency on the outdated `atty` crate.
We already transitively depend on it (e.g. through `miette`)
As soon as we reach the new Rust version we can supersede this with
@nibon7's #9550
Co-authored-by: nibon7 <nibon7@163.com>
# Description
- A new one is the removal of unnecessary `#` in raw strings without `"`
inside.
-
https://rust-lang.github.io/rust-clippy/master/index.html#/needless_raw_string_hashes
- The automatically applied removal of `.into_iter()` touched several
places where #9648 will change to the use of the record API. If
necessary I can remove them @IanManske to avoid churn with this PR.
- Manually applied `.try_fold` in two places
- Removed a dead `if`
- Manual: Combat rightward-drift with early return
# Description
This extends the syntax fix for `let` (#9589) to `mut` as well.
Example: `mut x = "hello world" | str length; print $x`
closes#9634
# User-Facing Changes
`mut` now joins `let` in being able to be assigned from a pipeline
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
The following math commands are being moved to nu-cmd-extra
* cos
* cosh
* egamma
* phi
* pi
* sin
* sinh
* tan
* tanh
* tau
For now I think we have most of the obvious commands moved over based on
@sholderbach this should cover moving the "high school" commands..
>>Yeah I think this rough separation into "high school" math in extra
and "middle school"/"programmer" math in the core makes a ton of sense.
And to reference the @fdncred list from
https://github.com/nushell/nushell/pull/9647#issuecomment-1629498812
* arccos
* arccosh
* arcsin
* arcsinh
* arctan
* arctanh
The above commands are being ported over to nu-cmd-extra
I initially moved all of the math commands over but there are some
issues with the tests...
So we will move them over slowly --- and actually I kind of like this
idea better...
Because some of the math commands we might want to leave in the core
nushell...
Stay tuned...
For more details 👍
Read this document:
https://github.com/stormasm/nutmp/blob/main/commands/math.md
# Description
Apart from `polars` (only used with `--features dataframe`) and the
dev-dependencies our deps use `indexmap 2.0`.
Thus the default or `extra` `cargo build` will reduce deps.
This also will help deduplicating `hashbrown` and `ahash`.
For #8060
- Bump `indexmap` to 2.0
- Remove unneeded `serde` feature from `indexmap`
# User-Facing Changes
None
# Description
follow up to #8529 and #8914
this works very similarly to record annotations, only difference being
that
```sh
table<name: string>
^^^^ ^^^^^^
| |
| represents the type of the items in that column
|
represents the column name
```
more info on the syntax can be found
[here](https://github.com/nushell/nushell/pull/8914#issue-1672113520)
# User-Facing Changes
**[BREAKING CHANGE]**
this change adds a field to `SyntaxShape::Table` so any plugins that
used it will have to update and include the field. though if you are
unsure of the type the table expects, `SyntaxShape::Table(vec![])` will
suffice
# Description
This fixes the `headers` command handling of missing values (issue
#9602). Previously, each row in the table would have its columns set to
be exactly equal to the first row even if it had less columns than the
first row. This would cause to values magically change their column or
cause panics in other commands if rows ended up having more columns than
values.
# Tests
Added a missing values test for the `headers` command
requires
- https://github.com/nushell/nushell/pull/9455
# ⚙️ Description
in this PR i move the commands we've all agreed, in the core team, to
move out of the core Nushell to the `extra` feature.
> **Warning**
> in the first commits here, i've
> - moved the implementations to `nu-cmd-extra`
> - removed the declaration of all the commands below from `nu-command`
> - made sure the commands were not available anymore with `cargo run --
-n`
## the list of commands to move
with the current command table downloaded as `commands.csv`, i've run
```bash
let commands = (
open commands.csv
| where is_plugin == "FALSE" and category != "deprecated"
| select name category "approv. %"
| rename name category approval
| insert treated {|it| (
($it.approval == 100) or # all the core team agreed on them
($it.name | str starts-with "bits") or # see https://github.com/nushell/nushell/pull/9241
($it.name | str starts-with "dfr") # see https://github.com/nushell/nushell/pull/9327
)}
)
```
to preprocess them and then
```bash
$commands | where {|it| (not $it.treated) and ($it.approval == 0)}
```
to get all untreated commands with no approval, which gives
```
╭────┬───────────────┬─────────┬─────────────┬──────────╮
│ # │ name │ treated │ category │ approval │
├────┼───────────────┼─────────┼─────────────┼──────────┤
│ 0 │ fmt │ false │ conversions │ 0 │
│ 1 │ each while │ false │ filters │ 0 │
│ 2 │ roll │ false │ filters │ 0 │
│ 3 │ roll down │ false │ filters │ 0 │
│ 4 │ roll left │ false │ filters │ 0 │
│ 5 │ roll right │ false │ filters │ 0 │
│ 6 │ roll up │ false │ filters │ 0 │
│ 7 │ rotate │ false │ filters │ 0 │
│ 8 │ update cells │ false │ filters │ 0 │
│ 9 │ decode hex │ false │ formats │ 0 │
│ 10 │ encode hex │ false │ formats │ 0 │
│ 11 │ from url │ false │ formats │ 0 │
│ 12 │ to html │ false │ formats │ 0 │
│ 13 │ ansi gradient │ false │ platform │ 0 │
│ 14 │ ansi link │ false │ platform │ 0 │
│ 15 │ format │ false │ strings │ 0 │
╰────┴───────────────┴─────────┴─────────────┴──────────╯
```
# 🖌️ User-Facing Changes
```
$nothing
```
# 🧪 Tests + Formatting
- ⚫ `toolkit fmt`
- ⚫ `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# 📖 After Submitting
```
$nothing
```
# 🔍 For reviewers
```bash
$commands | where {|it| (not $it.treated) and ($it.approval == 0)} | each {|command|
try {
help $command.name | ignore
} catch {|e|
$"($command.name): ($e.msg)"
}
}
```
should give no output in `cargo run --features extra -- -n` and a table
with 16 lines in `cargo run -- -n`
# Description
The `users` crate hasn't been updated for a long time, this PR tries to
replace `users` with `nix`.
See [advisory
page](https://rustsec.org/advisories/RUSTSEC-2023-0040.html) for
additional details.
# Description
in most of the tests for `last` and `first`, we do not need to
- give `cwd` to `nu!`
- use pipeline as the tests are all short pipes
- use `r#" ... "#` as the pipes never contain quotes
this PR removes all these points from the tests for the `last` and
`first` commands.
# Description
Add a `keybindings get` command to listen and get individual "keyboard"
events. This includes different keyboard keys (see example of use) on
seemingly all terminals and mouse, resize, focus and paste events on
some special once. The record returned by this command is similar to
crossterm event structure and is documented in help message. For ease of
use, option `--types` can get a list of event types to filter only
desired events automatically. Additionally `--raw` options displays raw
code of char keys and numeric format of modifier flags.
Example of use, moving a character around a grid with arrow keys:
```nu
def test [] {
mut x = 0
mut y = 0
loop {
clear
$x = ([([$x 4] | math min) 0] | math max)
$y = ([([$y 4] | math min) 0] | math max)
for i in 0..4 {
for j in 0..4 {
if $j == $x and $i == $y {
print -n "*"
} else {
print -n "."
}
}
print ""
}
let inp = (input listen-t [ key ])
match $inp.key {
{type: other key: enter} => (break)
{type: other key: up} => ($y = $y - 1)
{type: other key: down} => ($y = $y + 1)
{type: other key: left} => ($x = $x - 1)
{type: other key: right} => ($x = $x + 1)
_ => ()
}
}
}
```
# User-Facing Changes
- New `keybindngs get` command
- `keybindings listen` is left as is
- New `input display` command in std, mirroring functionality of
`keybindings listen`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Hi nushell!
Thanks so much for [adding http headers][headers]! I've been waiting for
this feature for a long time and it's great. However, I found that
`Record` as a return type and using `ureq`'s `response.header` api
results in missing header values when there are multiple with the same
name, as can occur with `set-cookie` and others.
This issue with http has been discussed at length [on
stackoverflow][stackoverflow] and in [`ureq` itself][ureq]. It seems
like concatenating header values with `,` is a common solution, but
tricky especially with `set-cookie` which may contain `,` in the
`Expires` field, as discussed in the former post.
I propose changing the return type to a `List` of `Record` so we can get
all of the header values without relying on ad-hoc mutation. This
solution does not return the headers in the same order as they appear in
the `Response` due to `ureq`'s `Response.all` API, but it's better than
dropping values imo.
This is a **breaking change**. I'm sure `ureq`'s
[`CookieStore`][cookiestore] is a better long-term solution for
returning cookies as a separate record on `http <method>`, but other
headers can be set multiple times as well.
# User-Facing Changes
- Changes the return type of an `http <method>` `header` field from
`Record` to `List` (Table with columns `name` and `value`)
- Returns all values of a header set multiple times instead of just the
first one duplicated
# Implementation
Quick note that running `header_names.dedup()` does not resolve the
necessity to iterate through the previously parsed headers since `dedup`
only removes identical values when they are next to each other in the
`Vec`. You could do a `sort` first, but header ordering can be important
in some cases, so I tried to avoid messing with that more than is
already the case with `Response.all`. Would love to see a better way of
doing this though!
# Tests + Formatting
No tests broke implementing this change. Not sure what endpoint to hit
or mock server to use to verify this in tests. I have some screenshots
to illustrate what I'm talking about.
Before:
> `set-cookie` has the same value for every record field.
> Even if it did not I'm not sure how you would access the different
values since they all have the same key.
After:
> Actual values from the response returned for the same name
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass
- [x] `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library <-- Note: I did not see a `crates/nu-std/test/run.nu`
file so I ran the snippet below which returned without error
```nushell
for $i in (ls crates/nu-std/tests/*.nu) {
cargo run -- $i.name
}
```
# Code of Conduct
Apologies for not opening an issue first. Just did this fix for myself
because it seemed simple enough before deciding to open this PR.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- [ ] update docs
[stackoverflow]:
https://stackoverflow.com/questions/3241326/set-more-than-one-http-header-with-the-same-name
[headers]: https://github.com/nushell/nushell/pull/8571
[ureq]: https://github.com/algesten/ureq/issues/95
[cookiestore]:
https://docs.rs/cookie_store/latest/cookie_store/struct.CookieStore.html
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
- fixes#9567
I have fixed everything mentioned in the issue, and made their help
messages more similar.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Previously, `last` on binary data returned an integer. Now it returns
a binary
- Now, `[] | last` and `[] | first` are both errors.
- Now, `ls | table | first` and `ls | table | last` are both errors.
