I've been working on streaming and pipeline interruption lately. It was
bothering me that checking ctrl+c (something we want to do often) always
requires a bunch of boilerplate like:
```rust
use std::sync::atomic::Ordering;
if let Some(ctrlc) = &engine_state.ctrlc {
if ctrlc.load(Ordering::SeqCst) {
...
```
I added a helper method to cut that down to:
```rust
if nu_utils::ctrl_c::was_pressed(&engine_state.ctrlc) {
...
```
Fixes#7342. `0..1000 | table` before this change:
`0..1000 | table` after this change:
When piping data to `table`, pages were not getting a newline at the
end[^1]. This problem was uncovered and exacerbated by the new
`display_output` hook which implicitly piped _everything_ to `table`.
## The Fix
`PagingTableCreator` now adds a newline to each page instead of relying
on later code to do it.
## Tests
I spent a while trying to write a regression test for this behaviour but
I couldn't get the test to fail before my fix! I think the test
infrastructure does something special with newlines when it's checking
command output. I eventually ran out of steam trying to investigate
that, sorry.
[^1]: unless the pipe to table was the implicit one that's done when
there is no `display_output` hook set. That situation was still working
OK.
# Description
While perusing Value.rs, I noticed the `Value::int()`, `Value::float()`,
`Value::boolean()` and `Value::string()` constructors, which seem
designed to make it easier to construct various Values, but which aren't
used often at all in the codebase. So, using a few find-replaces
regexes, I increased their usage. This reduces overall LOC because
structures like this:
```
Value::Int {
val: a,
span: head
}
```
are changed into
```
Value::int(a, head)
```
and are respected as such by the project's formatter.
There are little readability concerns because the second argument to all
of these is `span`, and it's almost always extremely obvious which is
the span at every callsite.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.
This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This change makes SQLite queries (`open foo.db`, `open foo.db | query db
"select ..."`) cancellable using `ctrl+c`. Previously they were not
cancellable, which made it unpleasant to accidentally open a very large
database or run an unexpectedly slow query!
UX-wise there's not too much to show:
## Notes
I was hoping to make SQLite queries streamable as part of this work, but
I ran into 2 problems:
1. `rusqlite` lifetimes are nightmarishly complex and they make it hard
to create a `ListStream` iterator
2. The functions on Nu's `CustomValue` trait return `Value` not
`PipelineData` and so `CustomValue` implementations can't stream data
AFAICT.
# Description
* Various help messages were edited for clarity/grammar/etc.
* Some examples were made more interesting or relevant
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* `$env.config.explore_config` renamed to `$env.config.explore`. This
follows the principle that config subrecords relating to single commands
(as this relates to `explore`) should be exactly named after the command
(see `ls`, `rm`, `table` etc.)
* In `into_config()`, moved the match arm relating to
`$env.config.explore` out of the "legacy options" section (which is
slated for removal in a later version).
# User-Facing Changes
`explore` is not in any public releases yet, so this has no end-user
impact.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fixes the compilation problems with `aarch64-apple-darwin` on rust
1.64 as well as the `zstd` problems. We recently found out that `zstd`
pinned to 1.65.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
rust 1.65.0 has been released for a while, this pr applies lint
suggestions from rust 1.65.0.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when execute external sub command, auto-trimming end
new-lines, like how fish shell does.
And if the command is executed directly like: `cat tmp`, the result
won't change.
Fixes: #6816Fixes: #3980
Note that although nushell works correctly by directly replace output of
external command to variable(or other places like string interpolation),
it's not friendly to user, and users almost want to use `str trim` to
trim trailing newline, I think that's why fish shell do this
automatically.
If the pr is ok, as a result, no more `str trim -r` is required when
user is writing scripts which using external commands.
# User-Facing Changes
Before:
<img width="523" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468810-86b04dbb-c147-459a-96a5-e0095eeaab3d.png">
After:
<img width="505" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468599-7b537488-3d6b-458e-9d75-d85780826db0.png">
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
* Add failing test that list of ints and floats is List<Number>
* Start defining subtype relation
* Make it possible to declare input and output types for commands
- Enforce them in tests
* Declare input and output types of commands
* Add formatted signatures to `help commands` table
* Revert SyntaxShape::Table -> Type::Table change
* Revert unnecessary derive(Hash) on SyntaxShape
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Allows use of slightly optimized variants that check if they have to use
the heavier vte parser. Tries to avoid unnnecessary allocations. Initial
performance characteristics proven out in #4378.
Also reduces boilerplate with right-ward drift.
* Remove unnecessary `#[allow]` annots
Reduce the number of lint exceptions that are not necessary with the
current state of the code (or more recent toolchain)
* Remove dead code from `FileStructure` in nu-command
* Replace `allow(unused)` with relevant feature switch
* Deal with `needless_collect` with annotations
* Change hack for needless_collect in `from json`
This change obviates the need for `allow(needless_collect)`
Removes a pessimistic allocation for empty strings, but increases
allocation size to `Value`
Probably not really worth it.
* Revert "Deal with `needless_collect` with annotations"
This reverts commit 05aca98445.
The previous state seems to better from a performance perspective as a
`Vec<String>` is lighter weight than `Vec<Value>`
* Disable clickable links when we can't get metadata of files
Fixes#6498
* Refactor path name rendering related code
* Make clickable links smarter
* Remove unneeded clone
* Return early if `use_ls_colors` is disabled
* Ignore `cargo tarpaulin` output files
* Add expected result for `columns` example
Examples without provided expected output will never be tested.
The subset of commands available in `test_examples()` is limited thus
excluding the tests depending on other commands
* Add example test harness to `reject`
* Test and fix `wrap` example
* Test and fix `drop column` example
* Update `from ods` examples
* Update `from xlsx` examples
* Run `to nuon` examples
* Run `hash base64` examples
* Add example output to `path parse`
* Test and fix the `grid` examples
* Do not pass non-string env vars to externals
Also misc cleanup
* Add note to default config
* Add a test
* Ensure PATH/Path conversion list <-> string
At the moment `crossterm` apparently has a regression decoding certain important key combinations on Windows.
Thus reedline reverted to the previous version.
Some changes are necessary to remove the need for `crossterm` in the use of `lscolors`.
Introduces two local conversion traits.
Additionally update the `Highlighter` API to support the cursor
position.
This will enable brace/statement match highlighting.
Same rationale as in #4378
Also accelerate `grid`
before:
```
Command being timed: "./eager_nu -c for i in 0..100000 { echo whatever } | grid"
User time (seconds): 0.21
System time (seconds): 0.05
Percent of CPU this job got: 36%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.71
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 48112
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 0
Minor (reclaiming a frame) page faults: 10580
Voluntary context switches: 266
Involuntary context switches: 2595
Swaps: 0
File system inputs: 0
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
```
after:
```
Command being timed: "./lazy_nu -c for i in 0..100000 { echo whatever } | grid"
User time (seconds): 0.14
System time (seconds): 0.05
Percent of CPU this job got: 33%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.60
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 48272
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 1
Minor (reclaiming a frame) page faults: 10582
Voluntary context switches: 286
Involuntary context switches: 831
Swaps: 0
File system inputs: 56
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
```
* Use only $nu.env.PWD for getting current directory
Because setting and reading to/from std::env changes the global state
shich is problematic if we call `cd` from multiple threads (e.g., in a
`par-each` block).
With this change, when engine-q starts, it will either inherit existing
PWD env var, or create a new one from `std::env::current_dir()`.
Otherwise, everything that needs the current directory will get it from
`$nu.env.PWD`. Each spawned external command will get its current
directory per-process which should be thread-safe.
One thing left to do is to patch nu-path for this as well since it uses
`std::env::current_dir()` in its expansions.
* Rename nu-path functions
*_with is not *_relative which should be more descriptive and frees
"with" for use in a followup commit.
* Clone stack every each iter; Fix some commands
Cloning the stack each iteration of `each` makes sure we're not reusing
PWD between iterations.
Some fixes in commands to make them use the new PWD.
* Post-rebase cleanup, fmt, clippy
* Change back _relative to _with in nu-path funcs
Didn't use the idea I had for the new "_with".
* Remove leftover current_dir from rebase
* Add cwd sync at merge_delta()
This makes sure the parser and completer always have up-to-date cwd.
* Always pass absolute path to glob in ls
* Do not allow PWD a relative path; Allow recovery
Makes it possible to recover PWD by proceeding with the REPL cycle.
* Clone stack in each also for byte/string stream
* (WIP) Start moving env variables to engine state
* (WIP) Move env vars to engine state (ugly)
Quick and dirty code.
* (WIP) Remove unused mut and args; Fmt
* (WIP) Fix dataframe tests
* (WIP) Fix missing args after rebase
* (WIP) Clone only env vars, not the whole stack
* (WIP) Add env var clone to `for` loop as well
* Minor edits
* Refactor merge_delta() to include stack merging.
Less error-prone than doing it manually.
* Clone env for each `update` command iteration
* Mark env var hidden only when found in eng. state
* Fix clippt warnings
* Add TODO about env var reading
* Do not clone empty environment in loops
* Remove extra cwd collection
* Split current_dir() into str and path; Fix autocd
* Make completions respect PWD env var
* get_columns is working in the columns command
* the new location of the get_columns method is nu-protocol/src/column.rs
* reference the new location of the get_columns method
* move get_columns to nu-engine
* Proof of concept treating env vars as Values
* Refactor env var collection and method name
* Remove unnecessary pub
* Move env translations into a new file
* Fix LS_COLORS to support any Value
* Fix spans during env var translation
* Add span to env var in cd
* Improve error diagnostics
* Fix non-string env vars failing string conversion
* Make PROMPT_COMMAND a Block instead of String
* Record host env vars to a fake file
This will give spans to env vars that would otherwise be without one.
Makes errors less confusing.
* Add 'env' command to list env vars
It will list also their values translated to strings
* Sort env command by name; Add env var type
* Remove obsolete test
* add icons to grid output. still needs cleanup
* working but adds a dependency on ansi_term - need to fix that
* update styling, added lots of green code to icons
* clippy
* add config point for grid icons
* option to replace command same name
* moved order of custom value declarations
* arranged dataframe folders and objects
* sort help commands by name
* added dtypes function for debugging
* corrected name for dataframe commands
* command names using function
* custom value trait
* functions for custom value trait
* custom trait behind flag
* open dataframe command
* command to-df for basic types
* follow path for dataframe
* dataframe operations
* dataframe not default feature
* custom as default feature
* corrected examples in command
