3 Commits

Author	SHA1	Message	Date
Bahex	c4dcfdb77b	feat!: Explicit cell-path case sensitivity syntax (#15692) ... Related: - #15683 - #14551 - #849 - #12701 - #11527 # Description Currently various commands have differing behavior regarding cell-paths ```nushell {a: 1, A: 2} | get a A # => ╭───┬───╮ # => │ 0 │ 2 │ # => │ 1 │ 2 │ # => ╰───┴───╯ {a: 1, A: 2} | select a A # => ╭───┬───╮ # => │ a │ 1 │ # => │ A │ 2 │ # => ╰───┴───╯ {A: 1} | update a 2 # => Error: nu:🐚:column_not_found # => # => × Cannot find column 'a' # => ╭─[entry #62:1:1] # => 1 │ {A: 1} | update a 2 # => · ───┬── ┬ # => · │ ╰── cannot find column 'a' # => · ╰── value originates here # => ╰──── ``` Proposal: making cell-path access case-sensitive by default and adding new syntax for case-insensitive parts, similar to optional (?) parts. ```nushell {FOO: BAR}.foo # => Error: nu:🐚:name_not_found # => # => × Name not found # => ╭─[entry #60:1:21] # => 1 │ {FOO: BAR}.foo # => · ─┬─ # => · ╰── did you mean 'FOO'? # => ╰──── {FOO: BAR}.foo! # => BAR ``` This would solve the problem of case sensitivity for all commands without causing an explosion of flags _and_ make it more granular Assigning to a field using a case-insensitive path is case-preserving. ```nushell mut val = {FOO: "I'm FOO"}; $val # => ╭─────┬─────────╮ # => │ FOO │ I'm FOO │ # => ╰─────┴─────────╯ $val.foo! = "I'm still FOO"; $val # => ╭─────┬───────────────╮ # => │ FOO │ I'm still FOO │ # => ╰─────┴───────────────╯ ``` For `update`, case-insensitive is case-preserving. ```nushell {FOO: 1} | update foo! { $in + 1 } # => ╭─────┬───╮ # => │ FOO │ 2 │ # => ╰─────┴───╯ ``` `insert` can insert values into nested values so accessing into existing columns is case-insensitive, but creating new columns uses the cell-path as it is. So `insert foo! ...` and `insert FOO! ...` would work exactly as they do without `!` ```nushell {FOO: {quox: 0}} # => ╭─────┬──────────────╮ # => │ │ ╭──────┬───╮ │ # => │ FOO │ │ quox │ 0 │ │ # => │ │ ╰──────┴───╯ │ # => ╰─────┴──────────────╯ {FOO: {quox: 0}} | insert foo.bar 1 # => ╭─────┬──────────────╮ # => │ │ ╭──────┬───╮ │ # => │ FOO │ │ quox │ 0 │ │ # => │ │ ╰──────┴───╯ │ # => │ │ ╭─────┬───╮ │ # => │ foo │ │ bar │ 1 │ │ # => │ │ ╰─────┴───╯ │ # => ╰─────┴──────────────╯ {FOO: {quox: 0}} | insert foo!.bar 1 # => ╭─────┬──────────────╮ # => │ │ ╭──────┬───╮ │ # => │ FOO │ │ quox │ 0 │ │ # => │ │ │ bar │ 1 │ │ # => │ │ ╰──────┴───╯ │ # => ╰─────┴──────────────╯ ``` `upsert` is tricky, depending on the input, the data might end up with different column names in rows. We can either forbid case-insensitive cell-paths for `upsert` or trust the user to keep their data in a sensible shape. This would be a breaking change as it would make existing cell-path accesses case-sensitive, however the case-sensitivity is already inconsistent and any attempt at making it consistent would be a breaking change. > What about `$env`? 1. Initially special case it so it keeps its current behavior. 2. Accessing environment variables with non-matching paths gives a deprecation warning urging users to either use exact casing or use the new explicit case-sensitivity syntax 3. Eventuall remove `$env`'s special case, making `$env` accesses case-sensitive by default as well. > `$env.ENV_CONVERSIONS`? In addition to `from_string` and `to_string` add an optional field to opt into case insensitive/preserving behavior. # User-Facing Changes - `get`, `where` and other previously case-insensitive commands are now case-sensitive by default. - `get`'s `--sensitive` flag removed, similar to `--ignore-errors` there is now an `--ignore-case` flag that treats all parts of the cell-path as case-insensitive. - Users can explicitly choose the case case-sensitivity of cell-path accesses or commands. # Tests + Formatting Existing tests required minimal modification. ***However, new tests are not yet added***. - 🟢 toolkit fmt - 🟢 toolkit clippy - 🟢 toolkit test - 🟢 toolkit test stdlib # After Submitting - Update the website to include the new syntax - Update [tree-sitter-nu](https://github.com/nushell/tree-sitter-nu) --------- Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>	2025-05-18 12:19:09 +03:00
Jack Wright	c2ac8f730e	Rust 1.85, edition=2024 (#15741)	2025-05-13 16:49:30 +02:00
132ikl	36c1073441	Rework sorting and add cell path and closure comparators to sort-by (#13154) ... # Description Closes #12535 Implements sort-by functionality of #8322 Fixes sort-by part of #8667 This PR does two main things: add a new cell path and closure parameter to `sort-by`, and attempt to make Nushell's sorting behavior well-defined. ## `sort-by` features The `columns` parameter is replaced with a `comparator` parameter, which can be a cell path or a closure. Examples are from docs PR. 1. Cell paths The basic interactive usage of `sort-by` is the same. For example, `ls | sort-by modified` still works the same as before. It is not quite a drop-in replacement, see [behavior changes](#behavior-changes). Here's an example of how the cell path comparator might be useful: ```nu > let cities = [ {name: 'New York', info: { established: 1624, population: 18_819_000 } } {name: 'Kyoto', info: { established: 794, population: 37_468_000 } } {name: 'São Paulo', info: { established: 1554, population: 21_650_000 } } ] > $cities | sort-by info.established ╭───┬───────────┬────────────────────────────╮ │ # │ name │ info │ ├───┼───────────┼────────────────────────────┤ │ 0 │ Kyoto │ ╭─────────────┬──────────╮ │ │ │ │ │ established │ 794 │ │ │ │ │ │ population │ 37468000 │ │ │ │ │ ╰─────────────┴──────────╯ │ │ 1 │ São Paulo │ ╭─────────────┬──────────╮ │ │ │ │ │ established │ 1554 │ │ │ │ │ │ population │ 21650000 │ │ │ │ │ ╰─────────────┴──────────╯ │ │ 2 │ New York │ ╭─────────────┬──────────╮ │ │ │ │ │ established │ 1624 │ │ │ │ │ │ population │ 18819000 │ │ │ │ │ ╰─────────────┴──────────╯ │ ╰───┴───────────┴────────────────────────────╯ ``` 2. Key closures You can supply a closure which will transform each value into a sorting key (without changing the underlying data). Here's an example of a key closure, where we want to sort a list of assignments by their average grade: ```nu > let assignments = [ {name: 'Homework 1', grades: [97 89 86 92 89] } {name: 'Homework 2', grades: [91 100 60 82 91] } {name: 'Exam 1', grades: [78 88 78 53 90] } {name: 'Project', grades: [92 81 82 84 83] } ] > $assignments | sort-by { get grades | math avg } ╭───┬────────────┬───────────────────────╮ │ # │ name │ grades │ ├───┼────────────┼───────────────────────┤ │ 0 │ Exam 1 │ [78, 88, 78, 53, 90] │ │ 1 │ Project │ [92, 81, 82, 84, 83] │ │ 2 │ Homework 2 │ [91, 100, 60, 82, 91] │ │ 3 │ Homework 1 │ [97, 89, 86, 92, 89] │ ╰───┴────────────┴───────────────────────╯ ``` 3. Custom sort closure The `--custom`, or `-c`, flag will tell `sort-by` to interpret closures as custom sort closures. A custom sort closure has two parameters, and returns a boolean. The closure should return `true` if the first parameter comes _before_ the second parameter in the sort order. For a simple example, we could rewrite a cell path sort as a custom sort (see [here](https://github.com/nushell/nushell.github.io/pull/1568/files#diff-a7a233e66a361d8665caf3887eb71d4288000001f401670c72b95cc23a948e86R231) for a more complex example): ```nu > ls | sort-by -c {|a, b| $a.size < $b.size } ╭───┬─────────────────────┬──────┬──────────┬────────────────╮ │ # │ name │ type │ size │ modified │ ├───┼─────────────────────┼──────┼──────────┼────────────────┤ │ 0 │ my-secret-plans.txt │ file │ 100 B │ 10 minutes ago │ │ 1 │ shopping_list.txt │ file │ 100 B │ 2 months ago │ │ 2 │ myscript.nu │ file │ 1.1 KiB │ 2 weeks ago │ │ 3 │ bigfile.img │ file │ 10.0 MiB │ 3 weeks ago │ ╰───┴─────────────────────┴──────┴──────────┴────────────────╯ ``` ## Making sort more consistent I think it's important for something as essential as `sort` to have well-defined semantics. This PR contains some changes to try to make the behavior of `sort` and `sort-by` consistent. In addition, after working with the internals of sorting code, I have a much deeper understanding of all of the edge cases. Here is my attempt to try to better define some of the semantics of sorting (if you are just interested in changes, skip to "User-Facing changes") - `sort`, `sort -v`, and `sort-by` now all work the same. Each individual sort implementation has been refactored into two functions in `sort_utils.rs`: `sort`, and `sort_by`. These can also be used in other parts of Nushell where values need to be sorted. - `sort` and `sort-by` used to handle `-i` and `-n` differently. - `sort -n` would consider all values which can't be coerced into a string to be equal - `sort-by -i` and `sort-by -n` would only work if all values were strings - In this PR, insensitive sort only affects comparison between strings, and natural sort only applies to numbers and strings (see below). - (not a change) Before and after this PR, `sort` and `sort-by` support sorting mixed types. There was a lot of discussion about potentially making `sort` and `sort-by` only work on lists of homogeneous types, but the general consensus was that `sort` should not error just because its input contains incompatible types. - In order to try to make working with data containing `null` values easier, I changed the PartialOrd order to sort `Nothing` values to the end of a list, regardless of what other types the list contains. Before, `null` would be sorted before `Binary`, `CellPath`, and `Custom` values. - (not a change) When sorted, lists of mixed types will contain sorted values of each type in order, for the most part - (not a change) For example, `[0x[1] (date now) "a" ("yesterday" | into datetime) "b" 0x[0]]` will be sorted as `["a", "b", a day ago, now, [0], [1]]`, where sorted strings appear first, then sorted datetimes, etc. - (not a change) The exception to this is `Int`s and `Float`s, which will intermix, `Strings` and `Glob`s, which will intermix, and `None` as described above. Additionally, natural sort will intermix strings with ints and floats (see below). - Natural sort no longer coerce all inputs to strings. - I did originally make natural only apply to strings, but @fdncred pointed out that the previous behavior also allowed you to sort numeric strings with numbers. This seems like a useful feature if we are trying to support sorting with mixed types, so I settled on coercing only numbers (int, float). This can be reverted if people don't like it. - Here is an example of this behavior in action, which is the same before and after this PR: ```nushell $ [1 "4" 3 "2"] | sort --natural ╭───┬───╮ │ 0 │ 1 │ │ 1 │ 2 │ │ 2 │ 3 │ │ 3 │ 4 │ ╰───┴───╯ ``` # User-Facing Changes ## New features - Replaces the `columns` string parameter of `sort-by` with a cell path or a closure. - The cell path parameter works exactly as you would expect - By default, the `closure` parameter acts as a "key sort"; that is, each element is transformed by the closure into a sorting key - With the `--custom` (`-c`) parameter, you can define a comparison function for completely custom sorting order. ## Behavior changes <details> <summary><code>sort -v</code> does not coerce record values to strings</summary> This was a bit of a surprising behavior, and is now unified with the behavior of `sort` and `sort-by`. Here's an example where you can observe the values being implicitly coerced into strings for sorting, as they are sorted like strings rather than numbers: Old behavior: ```nushell $ {foo: 9 bar: 10} | sort -v ╭─────┬────╮ │ bar │ 10 │ │ foo │ 9 │ ╰─────┴────╯ ``` New behavior: ```nushell $ {foo: 9 bar: 10} | sort -v ╭─────┬────╮ │ foo │ 9 │ │ bar │ 10 │ ╰─────┴────╯ ``` </details> <details> <summary>Changed <code>sort-by</code> parameters from <code>string</code> to <code>cell-path</code> or <code>closure</code>. Typical interactive usage is the same as before, but if passing a variable to <code>sort-by</code> it must be a cell path (or closure), not a string</summary> Old behavior: ```nushell $ let sort = "modified" $ ls | sort-by $sort ╭───┬──────┬──────┬──────┬────────────────╮ │ # │ name │ type │ size │ modified │ ├───┼──────┼──────┼──────┼────────────────┤ │ 0 │ foo │ file │ 0 B │ 10 hours ago │ │ 1 │ bar │ file │ 0 B │ 35 seconds ago │ ╰───┴──────┴──────┴──────┴────────────────╯ ``` New behavior: ```nushell $ let sort = "modified" $ ls | sort-by $sort Error: nu:🐚:type_mismatch × Type mismatch. ╭─[entry #10:1:14] 1 │ ls | sort-by $sort · ──┬── · ╰── Cannot sort using a value which is not a cell path or closure ╰──── $ let sort = $."modified" $ ls | sort-by $sort ╭───┬──────┬──────┬──────┬───────────────╮ │ # │ name │ type │ size │ modified │ ├───┼──────┼──────┼──────┼───────────────┤ │ 0 │ foo │ file │ 0 B │ 10 hours ago │ │ 1 │ bar │ file │ 0 B │ 2 minutes ago │ ╰───┴──────┴──────┴──────┴───────────────╯ ``` </details> <details> <summary>Insensitve and natural sorting behavior reworked</summary> Previously, the `-i` and `-n` worked differently for `sort` and `sort-by` (see "Making sort more consistent"). Here are examples of how these options result in different sorts now: 1. `sort -n` - Old behavior (types other than numbers, strings, dates, and binary sorted incorrectly) ```nushell $ [2sec 1sec] | sort -n ╭───┬──────╮ │ 0 │ 2sec │ │ 1 │ 1sec │ ╰───┴──────╯ ``` - New behavior ```nushell $ [2sec 1sec] | sort -n ╭───┬──────╮ │ 0 │ 1sec │ │ 1 │ 2sec │ ╰───┴──────╯ ``` 2. `sort-by -i` - Old behavior (uppercase words appear before lowercase words as they would in a typical sort, indicating this is not actually an insensitive sort) ```nushell $ ["BAR" "bar" "foo" 2 "FOO" 1] | wrap a | sort-by -i a ╭───┬─────╮ │ # │ a │ ├───┼─────┤ │ 0 │ 1 │ │ 1 │ 2 │ │ 2 │ BAR │ │ 3 │ FOO │ │ 4 │ bar │ │ 5 │ foo │ ╰───┴─────╯ ``` - New behavior (strings are sorted stably, indicating this is an insensitive sort) ```nushell $ ["BAR" "bar" "foo" 2 "FOO" 1] | wrap a | sort-by -i a ╭───┬─────╮ │ # │ a │ ├───┼─────┤ │ 0 │ 1 │ │ 1 │ 2 │ │ 2 │ BAR │ │ 3 │ bar │ │ 4 │ foo │ │ 5 │ FOO │ ╰───┴─────╯ ``` 3. `sort-by -n` - Old behavior (natural sort does not work when data contains non-string values) ```nushell $ ["10" 8 "9"] | wrap a | sort-by -n a ╭───┬────╮ │ # │ a │ ├───┼────┤ │ 0 │ 8 │ │ 1 │ 10 │ │ 2 │ 9 │ ╰───┴────╯ ``` - New behavior ```nushell $ ["10" 8 "9"] | wrap a | sort-by -n a ╭───┬────╮ │ # │ a │ ├───┼────┤ │ 0 │ 8 │ │ 1 │ 9 │ │ 2 │ 10 │ ╰───┴────╯ ``` </details> <details> <summary> Sorting a list of non-record values with a non-existent column/path now errors instead of sorting the values directly (<code>sort</code> should be used for this, not <code>sort-by</code>) </summary> Old behavior: ```nushell $ [2 1] | sort-by foo ╭───┬───╮ │ 0 │ 1 │ │ 1 │ 2 │ ╰───┴───╯ ``` New behavior: ```nushell $ [2 1] | sort-by foo Error: nu:🐚:incompatible_path_access × Data cannot be accessed with a cell path ╭─[entry #29:1:17] 1 │ [2 1] | sort-by foo · ─┬─ · ╰── int doesn't support cell paths ╰──── ``` </details> <details> <summary><code>sort</code> and <code>sort-by</code> output <code>List</code> instead of <code>ListStream</code> </summary> This isn't a meaningful change (unless I misunderstand the purpose of ListStream), since `sort` and `sort-by` both need to collect in order to do the sorting anyway, but is user observable. Old behavior: ```nushell $ ls | sort | describe -d ╭──────────┬───────────────────╮ │ type │ stream │ │ origin │ nushell │ │ subtype │ {record 3 fields} │ │ metadata │ {record 1 field} │ ╰──────────┴───────────────────╯ ``` ```nushell $ ls | sort-by name | describe -d ╭──────────┬───────────────────╮ │ type │ stream │ │ origin │ nushell │ │ subtype │ {record 3 fields} │ │ metadata │ {record 1 field} │ ╰──────────┴───────────────────╯ ``` New behavior: ```nushell ls | sort | describe -d ╭────────┬─────────────────╮ │ type │ list │ │ length │ 22 │ │ values │ [table 22 rows] │ ╰────────┴─────────────────╯ ``` ```nushell $ ls | sort-by name | describe -d ╭────────┬─────────────────╮ │ type │ list │ │ length │ 22 │ │ values │ [table 22 rows] │ ╰────────┴─────────────────╯ ``` </details> - `sort` now errors when nothing is piped in (`sort-by` already did this) # Tests + Formatting I added lots of unit tests on the new sort implementation to enforce new sort behaviors and prevent regressions. # After Submitting See [docs PR](https://github.com/nushell/nushell.github.io/pull/1568), which is ~2/3 finished. --------- Co-authored-by: NotTheDr01ds <32344964+NotTheDr01ds@users.noreply.github.com> Co-authored-by: Ian Manske <ian.manske@pm.me>	2024-10-09 19:18:16 -07:00