# Description
This PR introduces [workspaces
dependencies](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-dependencies-table).
The advantages are:
- a single place where dependency versions are declared
- reduces the number of files to change when upgrading a dependency
- reduces the risk of accidentally depending on 2 different versions of
the same dependency
I've only done a few so far. If this PR is accepted, I might continue
and progressively do the rest.
# User-Facing Changes
N/A
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
- Fixes issue #11982
# Description
Expressions with unbalanced parenthesis [excess closing ')' parenthesis]
will throw an error instead of interpreting ')' as a string.
Solved he same way as closing braces '}' are handled.
# User-Facing Changes
- Trailing closing parentheses ')' which do not match the number of
opening parentheses '(' will lead to a parse error.
- From what I have found in the documentation this is the intended
behavior, thus no documentation has been updated on my part
# Tests + Formatting
- Two tests added in src/tests/test_parser.rs
- All previous tests are still passing
- cargo fmt, clippy and test have been run
Unable to get the following command run
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
---------
Co-authored-by: Noak Jönsson <noakj@kth.se>
# Description
Converts help example results `to text` in `build-command-page`. This
prevents an `item_not_found` error when attempting to `help <command>`
on many legitimate commands.
Fixes#12073
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [open](https://github.com/Byron/open-rs) from 5.0.1 to 5.1.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/open-rs/releases">open's
releases</a>.</em></p>
<blockquote>
<h2>v5.1.1</h2>
<h3>Bug Fixes</h3>
<ul>
<li>add <code>shellexecute-on-windows</code> feature.
That way, it's possible to toggle on a feature that might
cause issues in some dependency trees that contain <code>flate2</code>
with <code>zlib-ng</code> backend.</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge branch 'validate-linkage' (59886df)</li>
<li>Add <code>shellexecute-on-windows</code> feature. (74fd8ec)</li>
<li>Try to validate linkage on all platforms (8f26da4)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>v5.1.0</h2>
<h3>New Features</h3>
<ul>
<li>use <code>ShellExecuteW</code> for detached spawning on Windows</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/91">#91</a> from
amrbashir/feat/windows/detachded-using-shellexecutew (b268647)</li>
<li>Split into two functions for better readability (4506b2f)</li>
<li>Use <code>ShellExecuteW</code> for detached spawning on Windows
(191cb0e)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/open-rs/blob/main/changelog.md">open's
changelog</a>.</em></p>
<blockquote>
<h2>5.1.1 (2024-03-03)</h2>
<h3>Bug Fixes</h3>
<ul>
<li><!-- raw HTML omitted --> add <code>shellexecute-on-windows</code>
feature.
That way, it's possible to toggle on a feature that might
cause issues in some dependency trees that contain <code>flate2</code>
with <code>zlib-ng</code> backend.</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge branch 'validate-linkage' (<a
href="59886df5db"><code>59886df</code></a>)</li>
<li>Add <code>shellexecute-on-windows</code> feature. (<a
href="74fd8ec005"><code>74fd8ec</code></a>)</li>
<li>Try to validate linkage on all platforms (<a
href="8f26da4ff1"><code>8f26da4</code></a>)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>5.1.0 (2024-03-01)</h2>
<h3>New Features</h3>
<ul>
<li><!-- raw HTML omitted --> use <code>ShellExecuteW</code> for
detached spawning on Windows</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>4 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="0c916aefe1"><code>0c916ae</code></a>
Release open v5.1.1</li>
<li><a
href="59886df5db"><code>59886df</code></a>
Merge branch 'validate-linkage'</li>
<li><a
href="74fd8ec005"><code>74fd8ec</code></a>
fix: add <code>shellexecute-on-windows</code> feature.</li>
<li><a
href="8f26da4ff1"><code>8f26da4</code></a>
try to validate linkage on all platforms</li>
<li><a
href="21a73ee19d"><code>21a73ee</code></a>
Release open v5.1.0</li>
<li><a
href="b268647bd2"><code>b268647</code></a>
Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/91">#91</a> from
amrbashir/feat/windows/detachded-using-shellexecutew</li>
<li><a
href="4506b2f8ac"><code>4506b2f</code></a>
split into two functions for better readability</li>
<li><a
href="191cb0e220"><code>191cb0e</code></a>
feat: use <code>ShellExecuteW</code> for detached spawning on
Windows</li>
<li><a
href="f4ef7c9de9"><code>f4ef7c9</code></a>
Release open v5.0.2</li>
<li><a
href="0a25651fa0"><code>0a25651</code></a>
Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/89">#89</a> from
jackpot51/patch-1</li>
<li>Additional commits viewable in <a
href="https://github.com/Byron/open-rs/compare/v5.0.1...v5.1.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR fixes a globbing bug in the `du` command. The problem was that
`--exclude` needed to be a `NuGlob` instead of a `String`. A variety of
ways were tried to fix this, including spread operators and `into glob`
but none of them worked. Here's the [Discord
Conversation](https://discord.com/channels/601130461678272522/1214950311207243796/1214950311207243796)
that documents the attempts.
### Before
```nushell
❯ du $env.PWD -x crates/**
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:16]
1 │ du $env.PWD -x crates/**
· ────┬────
· ╰── can't convert glob to string
╰────
```
### After
```nushell
❯ du $env.PWD -x crates/**
╭─#─┬────path────┬apparent─┬physical─┬───directories───┬files╮
│ 0 │ D:\nushell │ 55.6 MB │ 55.6 MB │ [table 17 rows] │ │
╰───┴────────────┴─────────┴─────────┴─────────────────┴─────╯
```
# Description
This PR fixes the typo in the parameter `--table-name` instead of
`--table_name` in the `into sqlite` command.
fixes#12067
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Hello! This is my first PR to nushell, as I was looking at things for
#5066. The usage text for the date commands seemed fine to me, so this
is just a bit of a tidy up of the examples, mostly the description text.
# Description
- Remove two incorrect examples for `date to-record` and `date to-table`
where nothing was piped in (which causes an error in actual use).
- Fix misleading descriptions in `date to-timezone` which erroneously
referred to Hawaii's time zone.
- Standardise on "time zone" in written descriptions.
- Generally tidy up example descriptions and improve consistency.
# User-Facing Changes
Only in related help text showing examples.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix typos in comments
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Signed-off-by: geekvest <cuimoman@sohu.com>
# Description
This improves the resolution of the sleep commands by simply not
clamping to the default 100ms ctrl+c signal checking loop if the
passed-in duration is shorter.
# User-Facing Changes
You can use smaller values in sleep.
```
# Before
timeit { 0..100 | each { |row| print $row; sleep 10ms; } } # +10sec
# After
timeit { 0..100 | each { |row| print $row; sleep 10ms; } } # +1sec
```
It still depends on the internal behavior of thread::sleep and the OS
timers. In windows it doesn't seem to go much lower than 15 or 10ms, or
0 if you asked for that.
# After Submitting
Sleep didn't have anything documenting its minimum value, so this should
be more in line with its standard procedure. It will still never sleep
for less time than allocated.
Did you know `sleep` can take multiple durations, and it'll add them up?
I didn't
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes sure `$nu.default-config-dir` and `$nu.plugin-path` are
canonicalized.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`$nu.default-config-dir` (and `$nu.plugin-path`) will now give canonical
paths, with symlinks and whatnot resolved.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I've added a couple of tests to check that even if the config folder
and/or any of the config files within are symlinks, the `$nu.*`
variables are properly canonicalized. These tests unfortunately only run
on Linux and MacOS, because I couldn't figure out how to change the
config directory on Windows. Also, given that they involve creating
files, I'm not sure if they're excessive, so I could remove one or two
of them.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Show an example of loading from a custom file, and an example of adding
multiple entry to PATH. Loading from a custom file will hopefully allow
for greater modularity of configuration files out of the box for new
users. Adding multiple paths to PATH is very common, and will help new
users to.
Adds this:
```
# To add multiple paths to PATH this may be simpler:
# use std "path add"
# $env.PATH = ($env.PATH | split row (char esep))
# path add /some/path
# path add ($env.CARGO_HOME | path join "bin")
# path add ($env.HOME | path join ".local" "bin")
# $env.PATH = ($env.PATH | uniq)
# To load from a custom file you can use:
# source ($nu.default-config-dir | path join 'custom.nu')
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Replace panics with errors in thread spawning.
Also adds `IntoSpanned` trait for easily constructing `Spanned`, and an
implementation of `From<Spanned<std::io::Error>>` for `ShellError`,
which is used to provide context for the error wherever there was a span
conveniently available. In general this should make it more convenient
to do the right thing with `std::io::Error` and always add a span to it
when it's possible to do so.
# User-Facing Changes
Fewer panics!
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This PR allows `view source` to view aliases again. It looks like it's
been half broken for a while now.
fixes#12044
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This command mixes input from multiple sources and sends items to the
final stream as soon as they're available. It can be called as part of a
pipeline with input, or it can take multiple closures and mix them that
way.
See `crates/nu-command/tests/commands/interleave.rs` for a practical
example. I imagine this will be most often used to run multiple commands
in parallel and print their outputs line-by-line. A stdlib command could
potentially use `interleave` to make this particular use case easier.
It's quite common to wish that nushell had a command for running things
in the background, and instead of providing job control, this provides
an alternative to some use cases for that by just allowing multiple
commands to run simultaneously and direct their output to the same
place.
This enables certain things that are not possible with `par-each` - for
example, you may wish to run `make` across several projects in parallel:
```nushell
(ls projects).name | par-each { |project| cd $project; make }
```
This works well enough, but the output will only be available after each
`make` command finishes. `interleave` allows you to get each line:
```nushell
interleave ...(
(ls projects).name | each { |project|
{
cd $project
make | lines | each { |line| {project: $project, out: $line} }
}
}
)
```
The result of this is a stream that you could process further - for
example, by saving to a text file.
Note that the closures themselves are not run in parallel. The initial
execution happens serially, and then the streams are consumed in
parallel.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Adds a new command.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes#12020
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Based off of #11760 to be mergable without conflicts.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix for #11757.
The main issue in #11757 is I tried to copy the timestamp from one
directory to another only to realize that did not work whereas the
coreutils `^touch` had no problems. I thought `--reference` just did not
work, but apparently the whole `touch` command could not work on
directories because
`OpenOptions::new().write(true).create(true).open(&item)` tries to
create `touch`'s target in advance and then modify its timestamps. But
if the target is a directory that already exists then this would fail
even though the crate used for working with timestamps, `filetime`,
already works on directories.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
I don't believe this should change any existing valid behaviors. It just
changes a non-working behavior.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
~~I only could not run `cargo test` because I get compilation errors on
the latest main branch~~
All tests pass with `cargo test --features=sqlite`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- Fixes#11997
# Description
Fixes the issue that comments are not ignored in SSV formatted data.
# User-Facing Changes
If you have a comment in the beginning of SSV formatted data it is now
not included in the SSV table.
# Tests + Formatting
The PR adds one test in the ssv.rs file. All previous test-cases are
still passing. Clippy and Fmt have been ran.
# Description
This PR removes our old nushell `mv` command in favor of the
uutils/coreutils `uu_mv` crate's `mv` command which we integrated in
0.90.1.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
This patches `StreamReader`'s iterator implementation to not return any
values after an I/O error has been encountered.
Without this, it's possible for a protocol error to cause the channel to
disconnect, in which case every call to `recv()` returns an error, which
causes the iterator to produce error values infinitely. There are some
commands that don't immediately stop after receiving an error so it's
possible that they just get stuck in an infinite error. This fixes that
so the error is only produced once, and then the stream ends
artificially.
# Description
After some iteration on globbing rules, I don't think `str escape-glob`
is needed
# User-Facing Changes
```nushell
❯ let f = "[ab]*.nu"
❯ $f | str escape-glob
Error: × str escape-glob is deprecated
╭─[entry #1:1:6]
1 │ $f | str escape-glob
· ───────┬───────
· ╰── if you are trying to escape a variable, you don't need to do it now
╰────
help: Remove `str escape-glob` call
[[]ab[]][*].nu
```
# Tests + Formatting
NaN
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
fixes#12006
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Process empty headers as well in `to md` command.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This fixes a race condition where all interfaces to a plugin might have
been dropped, but both sides are still expecting input, and the
`PluginInterfaceManager` doesn't get a chance to see that the interfaces
have been dropped and stop trying to consume input.
As the manager needs to hold on to a writer, we can't automatically
close the stream, but we also can't interrupt it if it's in a waiting to
read. So the best solution is to send a message to the plugin that we
are no longer going to be sending it any plugin calls, so that it knows
that it can exit when it's done.
This race condition is a little bit tricky to trigger as-is, but can be
more noticeable when running plugins in a tight loop. If too many plugin
processes are spawned at one time, Nushell can start to encounter "too
many open files" errors, and not be very useful.
# User-Facing Changes
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
I will need to add `Goodbye` to the protocol docs
# Description
This PR adds `is-not-empty` as a counterpart to `is-empty`. It's the
same code but negates the results. This command has been asked for many
times. So, I thought it would be nice for our community to add it just
as a quality-of-life improvement. This allows people to stop writing
their `def is-not-empty [] { not ($in | is-empty) }` custom commands.
I'm sure there will be some who disagree with adding this, I just think
it's like we have `in` and `not-in` and helps fill out the language and
makes it a little easier to use.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
[Related conversation on
Discord](https://discord.com/channels/601130461678272522/615329862395101194/1209951539901366292)
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is inspired by the Unix tee command, but significantly more
powerful. Rather than just writing to a file, you can do any kind of
stream operation that Nushell supports within the closure.
The equivalent of Unix `tee -a file.txt` would be, for example, `command
| tee { save -a file.txt }` - but of course this is Nushell, and you can
do the same with structured data to JSON objects, or even just run any
other command on the system with it.
A `--stderr` flag is provided for operating on the stderr stream from
external programs. This may produce unexpected results if the stderr
stream is not then also printed by something else - nushell currently
doesn't. See #11929 for the fix for that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
If someone was using the system `tee` command, they might be surprised
to find that it's different.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
As title, currently on latest main, nushell confused user if it allows
implicit casting between glob and string:
```nushell
let x = "*.txt"
def glob-test [g: glob] { open $g }
glob-test $x
```
It always expand the glob although `$x` is defined as a string.
This pr implements a solution from @kubouch :
> We could make it really strict and disallow all autocasting between
globs and strings because that's what's causing the "magic" confusion.
Then, modify all builtins that accept globs to accept oneof(glob,
string) and the rules would be that globs always expand and strings
never expand
# User-Facing Changes
After this pr, user needs to use `into glob` to invoke `glob-test`, if
user pass a string variable:
```nushell
let x = "*.txt"
def glob-test [g: glob] { open $g }
glob-test ($x | into glob)
```
Or else nushell will return an error.
```
3 │ glob-test $x
· ─┬
· ╰── can't convert string to glob
```
# Tests + Formatting
Done
# After Submitting
Nan
# Description
Fixes: #11912
# User-Facing Changes
After this change:
```
let x = '*.nu'; ^echo $x
```
will no longer expand glob.
If users still want to expand glob, there are also 3 ways to do this:
```
# 1. use spread operation with `glob` command
let x = '*.nu'; ^echo ...(glob $x)
```
# Tests + Formatting
Done
# After Submitting
NaN
This PR should close#11693.
# Description
This PR just adds a '--all' flag to the `clear` command in order to
clear the terminal and its history.
By default, the `clear` command only scrolls down.
In some cases, clearing the history as well can be useful.
Default behavior does not change.
Even if the `clear` command can be extended form within nushell, having
it in out of the box would allow to use it raw, without any
customization required.
Last but not least, it is pretty easy to implement as it is already
supported by the crate which is used to clear the terminal
(`crossterm`).
Providing relevant screenshot is pretty difficult because the result is
the same.
In the `clear --all` case, you just cannot scroll back anymore.
# User-Facing Changes
`clear` just scrolls down as usual without wiping the history of the
terminal.
` clear --all` scrolls down and wipe the terminal's history which means
scrolling back is no more possible.
# Tests + Formatting
General formatting and tests pass and have been executed on Linux only.
I don't have any way to test it on other systems.
There are no specific tests for the `clear` command so I didn't add any
(and I am not sure how to do if I had to).
Clear command is just a wrapper of the `crossterm` crate Clear command.
I would be more than happy if someone else was able to test it in other
context (even if it may be good as we rely on the crossterm crate).
# After Submitting
PR for documentation has been drafted:
https://github.com/nushell/nushell.github.io/pull/1266.
I'll update it with version if this PR is merged.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
- enables `bits` commands to operate on binary data, where both inputs
are binary and can vary in length
- adds an `--endian` flag to `bits and`, `or`, `xor` for specifying
endianness (for binary values of different lengths)
# User-Facing Changes
- `bits` commands will no longer error for non-int inputs
- the default for `--number-bytes` is now `auto` (infer int size;
changed from 8)
# Tests + Formatting
> addendum: first PR, please inform if any changes are needed
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`umkdir` was added in #10785, I think it's time to replace the default
one.
# After Submitting
Remove the old `mkdir` command and making coreutils' `umkdir` as the
default
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
- adds a `--signed` flag to `into int` to allow parsing binary values as
signed integers, the integer size depends on the length of the binary
value
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- attempting to convert binary values larger than 8 bytes into integers
now throws an error, with or without `--signed`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- wrote 3 tests and 1 example for `into int --signed` usage
- added an example for unsigned binary `into int`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- will add examples from this PR to `into int` documentation
# Description
Attempting to complete a directory with hidden files could cause a
variety of issues. When Rust parses the partial path to be completed
into components, it removes the trailing `.` since it interprets this to
mean "the current directory", but in the case of the completer we
actually want to treat the trailling `.` as a literal `.`. This PR fixes
this by adding a `.` back into the Path components if the last character
of the path is a `.` AND the path is longer than 1 character (eg., not
just a ".", since that correctly gets interpreted as Component::CurDir).
Here are some things this fixes:
- Panic when tab completing for hidden files in a directory with hidden
files (ex. `ls test/.`)
- Panic when tab completing a directory with only hidden files (since
the common prefix ends with a `.`, causing the previous issue)
- Mishandling of tab completing hidden files in directory (ex. `ls
~/.<TAB>` lists all files instead of just hidden files)
- Trailing `.` being inexplicably removed when tab completing a
directory without hidden files
While testing for this PR I also noticed there is a similar issue when
completing with `..` (ex. `ls ~/test/..<TAB>`) which is not fixed by
this PR (edit: see #11922).
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a hidden-files-within-directories test to the `file_completions`
test.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tweaks the built-in `cal` command so that it's still nushell-y
but looks closer to the "expected" cal by abbreviating the name of the
days. I also added the ability to color the current day with the current
"header" color.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, there's multiple places that look for a config directory, and
each of them has different error messages when it can't be found. This
PR makes a `ConfigDirNotFound` error to standardize the error message
for all of these cases.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Previously, the errors in `create_nu_constant()` would say which config
file Nushell was trying to get when it couldn't find the config
directory. Now it doesn't. However, I think that's fine, given that it
doesn't matter whether it couldn't find the config directory while
looking for `login.nu` or `env.nu`, it only matters that it couldn't
find it.
This is what the error looks like:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
Bumps [mockito](https://github.com/lipanski/mockito) from 1.2.0 to
1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lipanski/mockito/releases">mockito's
releases</a>.</em></p>
<blockquote>
<h2>1.3.0</h2>
<ul>
<li><a
href="3e2d4662eb">Introduced</a>
<code>Server::new_with_opts</code>,
<code>Server::new_with_opts_async</code> and the <code>ServerOpts</code>
struct to allow configuring the server host, port and enabling
auto-asserts (see next item)</li>
<li><a
href="3e2d4662eb">Added</a>
the <code>assert_on_drop</code> server option that allows you to
automatically call <code>assert()</code> whenever your mocks go out of
scope (defaults to false)</li>
<li><a
href="2ed230b5e9">Expose</a>
<code>Server::socket_address()</code> to return the raw server
<code>SocketAddr</code></li>
<li><a
href="efc7da13c5">Use</a>
only required features for dependencies</li>
<li><a
href="bcdcb2a154">Accept</a>
<code>hyper::header::HeaderValue</code> as a <code>match_header()</code>
value</li>
</ul>
<p>Thanks to <a
href="https://github.com/andrewtoth"><code>@andrewtoth</code></a> <a
href="https://github.com/alexander-jackson"><code>@alexander-jackson</code></a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a09f1f0009"><code>a09f1f0</code></a>
Bump to 1.3.0</li>
<li><a
href="0be6d7a184"><code>0be6d7a</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/191">#191</a>
from lipanski/server-opts</li>
<li><a
href="3e2d4662eb"><code>3e2d466</code></a>
Allow configuring the mock server (host, port, assert_on_drop)</li>
<li><a
href="12cb5d0786"><code>12cb5d0</code></a>
Add sponsor button</li>
<li><a
href="3cce903c0f"><code>3cce903</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/186">#186</a>
from alexander-jackson/feat/return-raw-socket-address</li>
<li><a
href="2ed230b5e9"><code>2ed230b</code></a>
feat: return raw socket address</li>
<li><a
href="496f26da87"><code>496f26d</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/185">#185</a>
from andrewtoth/less-deps</li>
<li><a
href="40138fe979"><code>40138fe</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/184">#184</a>
from andrewtoth/into-headername</li>
<li><a
href="efc7da13c5"><code>efc7da1</code></a>
Use only required features for dependencies</li>
<li><a
href="10d1081d80"><code>10d1081</code></a>
Add impl IntoHeaderName for &HeaderName</li>
<li>Additional commits viewable in <a
href="https://github.com/lipanski/mockito/compare/1.2.0...1.3.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [tempfile](https://github.com/Stebalien/tempfile) from 3.9.0 to
3.10.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Stebalien/tempfile/blob/master/CHANGELOG.md">tempfile's
changelog</a>.</em></p>
<blockquote>
<h2>3.10.0</h2>
<ul>
<li>Drop <code>redox_syscall</code> dependency, we now use
<code>rustix</code> for Redox.</li>
<li>Add <code>Builder::permissions</code> for setting the permissions on
temporary files and directories (thanks to <a
href="https://github.com/Byron"><code>@Byron</code></a>).</li>
<li>Update rustix to 0.38.31.</li>
<li>Update fastrand to 2.0.1.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="61531eae61"><code>61531ea</code></a>
chore: release v3.10.0</li>
<li><a
href="e246c4a004"><code>e246c4a</code></a>
chore: update deps (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/275">#275</a>)</li>
<li><a
href="4a05e47d3b"><code>4a05e47</code></a>
feat: Add <code>Builder::permissions()</code> method. (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/273">#273</a>)</li>
<li><a
href="184ab8f5ca"><code>184ab8f</code></a>
fix: drop redox_syscall dependency (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/272">#272</a>)</li>
<li>See full diff in <a
href="https://github.com/Stebalien/tempfile/compare/v3.9.0...v3.10.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [strum_macros](https://github.com/Peternator7/strum) from 0.25.3
to 0.26.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/Peternator7/strum/releases">strum_macros's
releases</a>.</em></p>
<blockquote>
<h2>v0.26.1</h2>
<h2>0.26.1</h2>
<ul>
<li><a
href="https://redirect.github.com/Peternator7/strum/pull/325">#325</a>:
use <code>core</code> instead of <code>std</code> in VariantArray.</li>
</ul>
<h2>0.26.0</h2>
<h3>Breaking Changes</h3>
<ul>
<li>The <code>EnumVariantNames</code> macro has been renamed
<code>VariantNames</code>. The deprecation warning should steer you in
the right direction for fixing the warning.</li>
<li>The Iterator struct generated by EnumIter now has new bounds on it.
This shouldn't break code unless you manually
added the implementation in your code.</li>
<li><code>Display</code> now supports format strings using named fields
in the enum variant. This should be a no-op for most code.
However, if you were outputting a string like <code>"Hello
{field}"</code>, this will now be interpretted as a format
string.</li>
<li>EnumDiscriminant now inherits the repr and discriminant values from
your main enum. This makes the discriminant type
closer to a mirror of the original and that's always the goal.</li>
</ul>
<h3>New features</h3>
<ul>
<li>
<p>The <code>VariantArray</code> macro has been added. This macro adds
an associated constant <code>VARIANTS</code> to your enum. The constant
is a <code>&'static [Self]</code> slice so that you can access all
the variants of your enum. This only works on enums that only
have unit variants.</p>
<pre lang="rust"><code>use strum::VariantArray;
<p>#[derive(Debug, VariantArray)]
enum Color {
Red,
Blue,
Green,
}</p>
<p>fn main() {
println!("{:?}", Color::VARIANTS); // prints:
["Red", "Blue", "Green"]
}
</code></pre></p>
</li>
<li>
<p>The <code>EnumTable</code> macro has been <em>experimentally</em>
added. This macro adds a new type that stores an item for each variant
of the enum. This is useful for storing a value for each variant of an
enum. This is an experimental feature because
I'm not convinced the current api surface area is correct.</p>
<pre lang="rust"><code>use strum::EnumTable;
<p>#[derive(Copy, Clone, Debug, EnumTable)]
enum Color {
Red,
Blue,
</code></pre></p>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Peternator7/strum/blob/master/CHANGELOG.md">strum_macros's
changelog</a>.</em></p>
<blockquote>
<h2>0.26.1</h2>
<ul>
<li><a
href="https://redirect.github.com/Peternator7/strum/pull/325">#325</a>:
use <code>core</code> instead of <code>std</code> in VariantArray.</li>
</ul>
<h2>0.26.0</h2>
<h3>Breaking Changes</h3>
<ul>
<li>The <code>EnumVariantNames</code> macro has been renamed
<code>VariantNames</code>. The deprecation warning should steer you in
the right direction for fixing the warning.</li>
<li>The Iterator struct generated by EnumIter now has new bounds on it.
This shouldn't break code unless you manually
added the implementation in your code.</li>
<li><code>Display</code> now supports format strings using named fields
in the enum variant. This should be a no-op for most code.
However, if you were outputting a string like <code>"Hello
{field}"</code>, this will now be interpretted as a format
string.</li>
<li>EnumDiscriminant now inherits the repr and discriminant values from
your main enum. This makes the discriminant type
closer to a mirror of the original and that's always the goal.</li>
</ul>
<h3>New features</h3>
<ul>
<li>
<p>The <code>VariantArray</code> macro has been added. This macro adds
an associated constant <code>VARIANTS</code> to your enum. The constant
is a <code>&'static [Self]</code> slice so that you can access all
the variants of your enum. This only works on enums that only
have unit variants.</p>
<pre lang="rust"><code>use strum::VariantArray;
<p>#[derive(Debug, VariantArray)]
enum Color {
Red,
Blue,
Green,
}</p>
<p>fn main() {
println!("{:?}", Color::VARIANTS); // prints:
["Red", "Blue", "Green"]
}
</code></pre></p>
</li>
<li>
<p>The <code>EnumTable</code> macro has been <em>experimentally</em>
added. This macro adds a new type that stores an item for each variant
of the enum. This is useful for storing a value for each variant of an
enum. This is an experimental feature because
I'm not convinced the current api surface area is correct.</p>
<pre lang="rust"><code>use strum::EnumTable;
<p>#[derive(Copy, Clone, Debug, EnumTable)]
enum Color {
Red,
Blue,
Green,
</code></pre></p>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/Peternator7/strum/commits/v0.26.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
