393 Commits

Author	SHA1	Message	Date
Stefan Holderbach	a1b7261121	Bump version for 0.79.0 release (#8980)	2023-04-25 23:06:17 +03:00
Reilly Wood	4ecec59224	Upgrade open crate to fix WSL bug (#8905) ... This PR upgrades the [`open`](https://github.com/Byron/open-rs) crate (used in the `start` command) from 4.0.1 to 4.0.2. This fixes a bug where `open` doesn't always work properly on WSL: https://github.com/Byron/open-rs/pull/71	2023-04-16 22:05:40 -07:00
WindSoilder	9b35d59023	Update crossterm version to 0.26 (#8623) ... # Description This pr is a companion to https://github.com/nushell/reedline/pull/560 Fortunally, we don't need to change too much nushell code. ## Additional note about lscolor dependency https://github.com/sharkdp/lscolors/pull/58~~ lscolor is using 0.26 for now	2023-04-14 22:14:57 +02:00
Bob Hyman	8efbb48cb0	Pick up fix in dtparse for nanosec truncation noted at bottom of #8337 (#8805) ... # Description Pick up [enhancement in `dtparse`](https://github.com/bspeice/dtparse/pull/41), to preserve nanoseconds in string-to-date conversions. # User-Facing Changes An especially eagle-eyed user might notice that prior versions of nushell were losing nanosecond precision when converting string format date/time to datetime. Before: ```nushell 〉'2023-03-02T01:02:03.987654321' | into datetime | date to-record ╭────────────┬───────────╮ │ year │ 2023 │ │ month │ 3 │ │ day │ 2 │ │ hour │ 1 │ │ minute │ 2 │ │ second │ 3 │ │ nanosecond │ 987654000 │ │ timezone │ -04:00 │ ╰────────────┴───────────╯ ``` Now, it just works(tm) ```nushell 〉'2023-03-02T01:02:03.987654321' | into datetime | date to-record ╭────────────┬───────────╮ │ year │ 2023 │ │ month │ 3 │ │ day │ 2 │ │ hour │ 1 │ │ minute │ 2 │ │ second │ 3 │ │ nanosecond │ 987654321 │ │ timezone │ -04:00 │ ╰────────────┴───────────╯ ``` # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - [x] `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - [x] `cargo test --workspace` to check that all tests pass Some (unrelated) tests did fail [^err] - [x] `cargo run -- crates/nu-std/tests.nu` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. # (Unrelated) test failures noted [^err]: Several tests are failing, unrelated to this PR ``` failures: ---- modules::module_import_env_1 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env main.nu; use main.nu foo; foo · ───┬─── · ╰── file not found ╰──── thread 'modules::module_import_env_1' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"foo"`', tests/modules/mod.rs:316:9 note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace ---- modules::module_import_env_2 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env main.nu; $env.FOO · ───┬─── · ╰── file not found ╰──── thread 'modules::module_import_env_2' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"foo"`', tests/modules/mod.rs:341:9 ---- overlays::overlay_use_do_cd_file_relative stdout ---- === stderr thread 'overlays::overlay_use_do_cd_file_relative' panicked at 'assertion failed: `(left == right)` left: `"nushell"`, right: `"test1"`', tests/overlays/mod.rs:919:9 ---- overlays::overlay_use_dont_cd_overlay stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env test1/test2/spam.nu; $env.PWD | path basename · ─────────┬───────── · ╰── file not found ╰──── thread 'overlays::overlay_use_dont_cd_overlay' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"overlay_use_dont_cd_overlay"`', tests/overlays/mod.rs:946:9 ---- parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env lol/lol.nu; $env.FOO · ─────┬──── · ╰── file not found ╰──── thread 'parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"good"`', tests/parsing/mod.rs:177:9 ---- parsing::parse_file_relative_to_parsed_file_simple stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env lol/lol/lol.nu; $env.LOL · ───────┬────── · ╰── file not found ╰──── thread 'parsing::parse_file_relative_to_parsed_file_simple' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"lol"`', tests/parsing/mod.rs:99:9 ---- shell::const_nu_lib_dirs_relative stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[main.nu:1:1] 1 │ const NU_LIB_DIRS = [ 'scripts' ] 2 │ source-env foo.nu · ───┬── thread 'shell::const_nu_lib_dirs_relative' panicked at 'assertion failed: outcome.err.is_empty()', tests/shell/mod.rs:166:9 ---- shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines stdout ---- === stderr thread 'shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"AndrásWithKitKat"`', tests/shell/pipeline/commands/external.rs:198:13 ---- shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings stdout ---- === stderr thread 'shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"jt_likes_cake.txt"`', tests/shell/pipeline/commands/external.rs:173:13 failures: modules::module_import_env_1 modules::module_import_env_2 overlays::overlay_use_do_cd_file_relative overlays::overlay_use_dont_cd_overlay parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1 parsing::parse_file_relative_to_parsed_file_simple shell::const_nu_lib_dirs_relative shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings test result: FAILED. 386 passed; 9 failed; 20 ignored; 0 measured; 0 filtered out; finished in 98.06s error: test failed, to rerun pass `-p nu --test main` failures: ---- modules::module_import_env_1 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env main.nu; use main.nu foo; foo · ───┬─── · ╰── file not found ╰──── thread 'modules::module_import_env_1' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"foo"`', tests/modules/mod.rs:316:9 note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace ---- modules::module_import_env_2 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env main.nu; $env.FOO · ───┬─── · ╰── file not found ╰──── thread 'modules::module_import_env_2' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"foo"`', tests/modules/mod.rs:341:9 ---- overlays::overlay_use_do_cd_file_relative stdout ---- === stderr thread 'overlays::overlay_use_do_cd_file_relative' panicked at 'assertion failed: `(left == right)` left: `"nushell"`, right: `"test1"`', tests/overlays/mod.rs:919:9 ---- overlays::overlay_use_dont_cd_overlay stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env test1/test2/spam.nu; $env.PWD | path basename · ─────────┬───────── · ╰── file not found ╰──── thread 'overlays::overlay_use_dont_cd_overlay' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"overlay_use_dont_cd_overlay"`', tests/overlays/mod.rs:946:9 ---- parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env lol/lol.nu; $env.FOO · ─────┬──── · ╰── file not found ╰──── thread 'parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"good"`', tests/parsing/mod.rs:177:9 ---- parsing::parse_file_relative_to_parsed_file_simple stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env lol/lol/lol.nu; $env.LOL · ───────┬────── · ╰── file not found ╰──── thread 'parsing::parse_file_relative_to_parsed_file_simple' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"lol"`', tests/parsing/mod.rs:99:9 ---- shell::const_nu_lib_dirs_relative stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[main.nu:1:1] 1 │ const NU_LIB_DIRS = [ 'scripts' ] 2 │ source-env foo.nu · ───┬── thread 'shell::const_nu_lib_dirs_relative' panicked at 'assertion failed: outcome.err.is_empty()', tests/shell/mod.rs:166:9 ---- shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines stdout ---- === stderr thread 'shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"AndrásWithKitKat"`', tests/shell/pipeline/commands/external.rs:198:13 ---- shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings stdout ---- === stderr thread 'shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"jt_likes_cake.txt"`', tests/shell/pipeline/commands/external.rs:173:13 failures: modules::module_import_env_1 modules::module_import_env_2 overlays::overlay_use_do_cd_file_relative overlays::overlay_use_dont_cd_overlay parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1 parsing::parse_file_relative_to_parsed_file_simple shell::const_nu_lib_dirs_relative shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings test result: FAILED. 386 passed; 9 failed; 20 ignored; 0 measured; 0 filtered out; finished in 98.06s error: test failed, to rerun pass `-p nu --test main` failures: ---- modules::module_import_env_1 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env main.nu; use main.nu foo; foo · ───┬─── · ╰── file not found ╰──── thread 'modules::module_import_env_1' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"foo"`', tests/modules/mod.rs:316:9 note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace ---- modules::module_import_env_2 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env main.nu; $env.FOO · ───┬─── · ╰── file not found ╰──── thread 'modules::module_import_env_2' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"foo"`', tests/modules/mod.rs:341:9 ---- overlays::overlay_use_do_cd_file_relative stdout ---- === stderr thread 'overlays::overlay_use_do_cd_file_relative' panicked at 'assertion failed: `(left == right)` left: `"nushell"`, right: `"test1"`', tests/overlays/mod.rs:919:9 ---- overlays::overlay_use_dont_cd_overlay stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env test1/test2/spam.nu; $env.PWD | path basename · ─────────┬───────── · ╰── file not found ╰──── thread 'overlays::overlay_use_dont_cd_overlay' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"overlay_use_dont_cd_overlay"`', tests/overlays/mod.rs:946:9 ---- parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1 stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env lol/lol.nu; $env.FOO · ─────┬──── · ╰── file not found ╰──── thread 'parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"good"`', tests/parsing/mod.rs:177:9 ---- parsing::parse_file_relative_to_parsed_file_simple stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[source:1:1] 1 │ source-env lol/lol/lol.nu; $env.LOL · ───────┬────── · ╰── file not found ╰──── thread 'parsing::parse_file_relative_to_parsed_file_simple' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"lol"`', tests/parsing/mod.rs:99:9 ---- shell::const_nu_lib_dirs_relative stdout ---- === stderr Error: nu:🐚:file_not_found × File not found ╭─[main.nu:1:1] 1 │ const NU_LIB_DIRS = [ 'scripts' ] 2 │ source-env foo.nu · ───┬── thread 'shell::const_nu_lib_dirs_relative' panicked at 'assertion failed: outcome.err.is_empty()', tests/shell/mod.rs:166:9 ---- shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines stdout ---- === stderr thread 'shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"AndrásWithKitKat"`', tests/shell/pipeline/commands/external.rs:198:13 ---- shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings stdout ---- === stderr thread 'shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings' panicked at 'assertion failed: `(left == right)` left: `""`, right: `"jt_likes_cake.txt"`', tests/shell/pipeline/commands/external.rs:173:13 failures: modules::module_import_env_1 modules::module_import_env_2 overlays::overlay_use_do_cd_file_relative overlays::overlay_use_dont_cd_overlay parsing::parse_file_relative_to_parsed_file_dont_use_cwd_1 parsing::parse_file_relative_to_parsed_file_simple shell::const_nu_lib_dirs_relative shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_lines shell::pipeline::commands::external::it_evaluation::takes_rows_of_nu_value_strings test result: FAILED. 386 passed; 9 failed; 20 ignored; 0 measured; 0 filtered out; finished in 98.06s error: test failed, to rerun pass `-p nu --test main` ```	2023-04-14 07:24:46 -05:00
dependabot[bot]	5afc49250f	Bump umask from 2.0.0 to 2.1.0 (#8835)	2023-04-14 12:15:22 +00:00
dependabot[bot]	efb81a1277	Bump winreg from 0.11.0 to 0.50.0 (#8837)	2023-04-14 12:15:01 +00:00
Stefan Holderbach	57510f2fd2	Move CLI related commands to nu-cli (#8832) ... # Description Part of the larger cratification effort. Moves all `reedline` or shell line editor specific commands to `nu-cli`. ## From `nu-cmd-lang`: - `commandline` - This shouldn't have moved there. Doesn't directly depend on reedline but assumes parts in the engine state that are specific to the use of reedline or a REPL ## From `nu-command`: - `keybindings` and subcommands - `keybindings default` - `keybindings list` - `keybindings listen` - very `reedline` specific - `history` - needs `reedline` - `history session` ## internal use Instead of having a separate `create_default_context()` that calls `nu-command`'s `create_default_context()`, I added a `add_cli_context()` that updates an `EngineState` # User-Facing Changes None ## Build time comparison `cargo build --timings` from a `cargo clean --profile dev` ### total main: 64 secs this: 59 secs ### `nu-command` build time branch | total| codegen | fraction ---|---|---|--- main | 14.0s | 6.2s | (44%) this | 12.5s | 5.5s | (44%) `nu-cli` depends on `nu-command` at the moment. Thus it is built during the code-gen phase of `nu-command` (on 16 virtual cores) # Tests + Formatting I removed the `test_example()` facilities for now as we had not run any of the commands in an `Example` test and importing the right context for those tests seemed more of a hassle than the duplicated `test_examples()` implementations in `nu-cmd-lang` and `nu-command`	2023-04-10 10:56:47 +12:00
dependabot[bot]	a29b61bd4f	Bump miette from 5.6.0 to 5.7.0 (#8720)	2023-04-06 20:39:54 +00:00
dependabot[bot]	3509bde1a9	Bump windows from 0.46.0 to 0.48.0 (#8721) ... Bumps [windows](https://github.com/microsoft/windows-rs) from 0.46.0 to 0.48.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/microsoft/windows-rs/releases">windows's releases</a>.</em></p> <blockquote> <h2>0.48.0</h2> <p>This release includes an update to all crates to address a target version reliability issue. This issue is detailed here: <a href="https://redirect.github.com/microsoft/windows-rs/issues/2410#issuecomment-1490802715">microsoft/windows-rs#2410</a></p> <h2>What's Changed</h2> <ul> <li>Improve target version reliability by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2412">microsoft/windows-rs#2412</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/microsoft/windows-rs/compare/0.47.0...0.48.0">https://github.com/microsoft/windows-rs/compare/0.47.0...0.48.0</a></p> <h2>0.47.0</h2> <p>As a reminder, updates are only published by request (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2397">#2397</a>; <a href="https://redirect.github.com/microsoft/win32metadata/issues/1507">microsoft/win32metadata#1507</a>). This release provides an update to the <code>windows</code> crate. It does not include an update to the <code>windows-sys</code> crate.</p> <p>This update adds support for standalone code generation (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2396">#2396</a>) as well as requested fixes to the Win32 metadata that prevented some APIs from being used.</p> <h2>What's Changed</h2> <ul> <li>Workaround for <code>rustdoc</code> regression by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2381">microsoft/windows-rs#2381</a></li> <li>Token privilege samples by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2382">microsoft/windows-rs#2382</a></li> <li>Apply <code>const</code> parameter metadata by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2384">microsoft/windows-rs#2384</a></li> <li>Advanced metadata filtering by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2385">microsoft/windows-rs#2385</a></li> <li>Update Win32 metadata v46 by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2387">microsoft/windows-rs#2387</a></li> <li>Support standalone code generation by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2396">microsoft/windows-rs#2396</a></li> <li>Update readme to include <code>windows-targets</code> and <code>windows-bindgen</code> by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2399">microsoft/windows-rs#2399</a></li> <li>Update Win32 metadata v47 by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2400">microsoft/windows-rs#2400</a></li> <li>Version 0.47.0 by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2401">microsoft/windows-rs#2401</a></li> <li>Add CLR test for lib validation by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2403">microsoft/windows-rs#2403</a></li> <li>Restore reproducible libs by <a href="https://github.com/riverar"><code>@​riverar</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2402">microsoft/windows-rs#2402</a></li> <li>Check diff for all targets by <a href="https://github.com/kennykerr"><code>@​kennykerr</code></a> in <a href="https://redirect.github.com/microsoft/windows-rs/pull/2404">microsoft/windows-rs#2404</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/microsoft/windows-rs/compare/0.46.0...0.47.0">https://github.com/microsoft/windows-rs/compare/0.46.0...0.47.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="406944152e"><code>4069441</code></a> Improve target version reliability (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2412">#2412</a>)</li> <li><a href="ec95c1e6ac"><code>ec95c1e</code></a> Check diff for all targets (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2404">#2404</a>)</li> <li><a href="91e0a5c079"><code>91e0a5c</code></a> Restore reproducible libs (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2402">#2402</a>)</li> <li><a href="36ea325a8d"><code>36ea325</code></a> Add CLR test for lib validation (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2403">#2403</a>)</li> <li><a href="e03d14e2d0"><code>e03d14e</code></a> Version 0.47.0 (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2401">#2401</a>)</li> <li><a href="f86349d691"><code>f86349d</code></a> Update Win32 metadata v47 (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2400">#2400</a>)</li> <li><a href="3e3c87b5ed"><code>3e3c87b</code></a> Update readme to include <code>windows-targets</code> and <code>windows-bindgen</code> (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2399">#2399</a>)</li> <li><a href="6672c6d28a"><code>6672c6d</code></a> Support standalone code generation (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2396">#2396</a>)</li> <li><a href="f3ef2cdfa7"><code>f3ef2cd</code></a> Update Win32 metadata v46 (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2387">#2387</a>)</li> <li><a href="3507dcd3b1"><code>3507dcd</code></a> Advanced metadata filtering (<a href="https://redirect.github.com/microsoft/windows-rs/issues/2385">#2385</a>)</li> <li>Additional commits viewable in <a href="https://github.com/microsoft/windows-rs/compare/0.46.0...0.48.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-04-05 16:54:26 -05:00
Stefan Holderbach	d18cf19a3f	Bump to 0.78.1 development version (#8741) ... # Description either just development or hotfix	2023-04-05 13:36:10 +12:00
Stefan Holderbach	2ec2028637	Bump version to 0.78.0 (#8715) ... # Description Version bump for the `0.78.0` Start to include the version with our `default_config.nu` and `default_env.nu` # Checklist - [x] reedline - [ ] release notes	2023-04-04 20:47:00 +02:00
Stefan Holderbach	b84a01cb1d	Pin reedline to 0.18.0 release (#8728) ... # Description see release notes: https://github.com/nushell/reedline/releases/tag/v0.18.0	2023-04-04 00:23:08 +02:00
Stefan Holderbach	3bf5999ef4	Remove proptests for nuon writing/parsing (#8688) ... # Description The two tests `to_nuon_from_nuon` and `to_nuon_from_nuon_string` were taking multiple seconds and have since been superseded by more explicit unit tests. Compared to the time cost for devs and CI they seldomly returned explicit problems. One failure only popped up after months, as a sampled failure (https://github.com/nushell/nushell/pull/7564). # User-Facing Changes none # Tests + Formatting Fuzzing should move to a separate worker and be removed from the main test suite. See #8575 for experimentation around the impact on our test coverage.	2023-03-31 17:15:16 +02:00
dependabot[bot]	4a1d12462f	Bump miette from 5.5.0 to 5.6.0 (#8531) ... Bumps [miette](https://github.com/zkat/miette) from 5.5.0 to 5.6.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/zkat/miette/blob/main/CHANGELOG.md">miette's changelog</a>.</em></p> <blockquote> <h2>5.6.0 (2023-03-14)</h2> <h3>Bug Fixes</h3> <ul> <li><strong>ci:</strong> configure clippy-specific MSRV (<a href="b658fc020b">b658fc02</a>)</li> <li><strong>graphical:</strong> Fix wrong severity of related errors (<a href="https://redirect.github.com/zkat/miette/issues/234">#234</a>) (<a href="3497508aa9">3497508a</a>)</li> <li><strong>atty:</strong> Switch out <code>atty</code> for <code>is-terminal</code> (<a href="https://redirect.github.com/zkat/miette/issues/229">#229</a>) (<a href="443d240f49">443d240f</a>)</li> </ul> <h3>Features</h3> <ul> <li><strong>protocol:</strong> implement <code>Ord</code> for <code>Severity</code> (<a href="https://redirect.github.com/zkat/miette/issues/240">#240</a>) (<a href="ed486c959d">ed486c95</a>)</li> </ul> <p><!-- raw HTML omitted --><!-- raw HTML omitted --></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="78fe18e699"><code>78fe18e</code></a> chore: Release</li> <li><a href="2335b25ee7"><code>2335b25</code></a> docs: update changelog</li> <li><a href="443d240f49"><code>443d240</code></a> fix(atty): Switch out <code>atty</code> for <code>is-terminal</code> (<a href="https://redirect.github.com/zkat/miette/issues/229">#229</a>)</li> <li><a href="ed486c959d"><code>ed486c9</code></a> feat(protocol): implement <code>Ord</code> for <code>Severity</code> (<a href="https://redirect.github.com/zkat/miette/issues/240">#240</a>)</li> <li><a href="3497508aa9"><code>3497508</code></a> fix(graphical): Fix wrong severity of related errors (<a href="https://redirect.github.com/zkat/miette/issues/234">#234</a>)</li> <li><a href="b658fc020b"><code>b658fc0</code></a> fix(ci): configure clippy-specific MSRV</li> <li><a href="ebc61b5cf8"><code>ebc61b5</code></a> docs: Mention miette::miette! macro under &quot;... in application code&quot; (<a href="https://redirect.github.com/zkat/miette/issues/233">#233</a>)</li> <li><a href="14f952dc91"><code>14f952d</code></a> (cargo-release) start next development iteration 5.5.1-alpha.0</li> <li><a href="128c0a1fae"><code>128c0a1</code></a> (cargo-release) start next development iteration 5.5.1-alpha.0</li> <li>See full diff in <a href="https://github.com/zkat/miette/compare/miette-derive-v5.5.0...miette-derive-v5.6.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-03-24 22:55:25 +13:00
dependabot[bot]	a193b85123	Bump alphanumeric-sort from 1.4.4 to 1.5.0 (#8532)	2023-03-22 13:02:45 +00:00
dependabot[bot]	0f40c44ed2	Bump windows from 0.44.0 to 0.46.0 (#8535)	2023-03-22 13:02:03 +00:00
dependabot[bot]	b0be6c3013	Bump quick-xml from 0.27.1 to 0.28.1 (#8533)	2023-03-20 17:46:28 +00:00
dependabot[bot]	9c6bfc0be9	Bump rstest from 0.16.0 to 0.17.0 (#8534)	2023-03-20 17:27:29 +00:00
Steven Xu	1d3f6105f5	feat: add a command_not_found hook (#8314) ... # Description Add a `command_not_found` function to `$env.config.hooks`. If this function outputs a string, then it's included in the `help`. An example hook on *Arch Linux*, to find packages that contain the binary, looks like: ```nushell let-env config = { # ... hooks: { command_not_found: { |cmd_name| ( try { let pkgs = (pkgfile --binaries --verbose $cmd_name) ( $"(ansi $env.config.color_config.shape_external)($cmd_name)(ansi reset) " + $"may be found in the following packages:\n($pkgs)" ) } catch { null } ) } # ... ``` # User-Facing Changes - Add a `command_not_found` function to `$env.config.hooks`. # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-03-20 17:05:22 +13:00
JT	2d41613039	bump to 0.77.2 (#8496) ... # Description _(Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes.)_ _(Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience.)_ # User-Facing Changes _(List of all changes that impact the user experience here. This helps us keep track of breaking changes.)_ # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-03-17 21:29:15 +13:00
dependabot[bot]	2579a827fc	Bump mockito from 0.32.5 to 1.0.0 (#8426) ... Bumps [mockito](https://github.com/lipanski/mockito) from 0.32.5 to 1.0.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/lipanski/mockito/releases">mockito's releases</a>.</em></p> <blockquote> <h2>1.0.0</h2> <p>🎈 7 years and 63 releases later, it's finally time for the 1.0 🎈</p> <h2>Changes</h2> <ul> <li><strong>[Breaking]</strong> The legacy interface was removed in this version</li> <li><strong>[Breaking]</strong> <code>Mock::with_body_from_fn</code> was renamed to <code>Mock::with_chunked_body</code> - the former is still supported with a deprecation warning</li> <li>Mocks are only cleared when the server is dropped, not when the mock is dropped - this means you <strong>don't have to assign mocks to variables any more</strong> (unless you want to call other methods on them)</li> <li>Introduced the <code>Mock::remove</code> and <code>Mock::remove_async</code> methods to remove mocks on demand</li> </ul> <h2>Major changes since 0.31</h2> <ul> <li>Tests can now run in parallel</li> <li>Support for HTTP2</li> <li>An async interface for all actions (though the sync interface is also available)</li> <li>Mock multiple server/hosts at the same time</li> </ul> <p>For a list of all the changes please check the <a href="https://github.com/lipanski/mockito/releases">release log</a>.</p> <h2>Migrating to the new API</h2> <p>Legacy API:</p> <pre lang="rust"><code>let m1 = mockito::mock(&quot;GET&quot;, &quot;/hello&quot;).with_body(&quot;hello&quot;).create(); let m2 = mockito::mock(&quot;GET&quot;, &quot;/bye&quot;).with_body(&quot;bye&quot;).create(); <p>// Use one of these to configure your client let host = mockito:server_address(); let url = mockito::server_url(); </code></pre></p> <p>New API:</p> <pre lang="rust"><code>let mut server = mockito::Server::new(); server.mock(&quot;GET&quot;, &quot;/hello&quot;).with_body(&quot;hello&quot;).create(); server.mock(&quot;GET&quot;, &quot;/bye&quot;).with_body(&quot;bye&quot;).create(); <p>// Use one of these to configure your client let host = server.host_with_port(); let url = server.url(); </code></pre></p> <blockquote> <p>If you can't migrate to the new API in one go, consider using version 0.32.5, which supports both the legacy API as well as the new API.</p> </blockquote> <h2>Migrating to the async API</h2> <p>In order to write async tests, you'll need to use the <code>_async</code> methods:</p> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="9a07811955"><code>9a07811</code></a> Bump to 1.0.0</li> <li><a href="000c435f0e"><code>000c435</code></a> Merge pull request <a href="https://redirect.github.com/lipanski/mockito/issues/165">#165</a> from lipanski/one-zero</li> <li><a href="68c56290a1"><code>68c5629</code></a> Remove mocks when the server is dropped, not when the mock is dropped</li> <li><a href="ac9042d022"><code>ac9042d</code></a> Add the Windows line-ending fix to the test runner</li> <li><a href="0ce9788e00"><code>0ce9788</code></a> Disable color tests on Windows</li> <li><a href="ad2ebcbaab"><code>ad2ebcb</code></a> Fine-tuning the Windows test runner</li> <li><a href="abb9e91d71"><code>abb9e91</code></a> Run Windows tests on Github Actions</li> <li><a href="5a7c96eaec"><code>5a7c96e</code></a> Rename Mock::with_body_from_fn to Mock::with_chunked_body</li> <li><a href="ed338faedf"><code>ed338fa</code></a> Uncomment threads tests</li> <li><a href="6e2064de95"><code>6e2064d</code></a> Drop legacy interface</li> <li>Additional commits viewable in <a href="https://github.com/lipanski/mockito/compare/0.32.5...1.0.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-03-16 11:40:49 +01:00
dependabot[bot]	71fdf717a8	Bump open from 3.4.0 to 4.0.0 (#8427)	2023-03-15 18:41:39 +00:00
dependabot[bot]	f34ac9be62	Bump sqlparser from 0.30.0 to 0.32.0 (#8428) ... Bumps [sqlparser](https://github.com/sqlparser-rs/sqlparser-rs) from 0.30.0 to 0.32.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/sqlparser-rs/sqlparser-rs/blob/main/CHANGELOG.md">sqlparser's changelog</a>.</em></p> <blockquote> <h2>[0.32.0] 2023-03-6</h2> <h3>Added</h3> <ul> <li>Support ClickHouse <code>CREATE TABLE</code> with <code>ORDER BY</code> (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/824">#824</a>) - Thanks <a href="https://github.com/ankrgyl"><code>@​ankrgyl</code></a></li> <li>Support PostgreSQL exponentiation <code>^</code> operator (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/813">#813</a>) - Thanks <a href="https://github.com/michael-2956"><code>@​michael-2956</code></a></li> <li>Support <code>BIGNUMERIC</code> type in BigQuery (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/811">#811</a>) - Thanks <a href="https://github.com/togami2864"><code>@​togami2864</code></a></li> <li>Support for optional trailing commas (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/810">#810</a>) - Thanks <a href="https://github.com/ankrgyl"><code>@​ankrgyl</code></a></li> </ul> <h3>Fixed</h3> <ul> <li>Fix table alias parsing regression by backing out redshift column definition list (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/827">#827</a>) - Thanks <a href="https://github.com/alamb"><code>@​alamb</code></a></li> <li>Fix typo in <code>ReplaceSelectElement</code> <code>colum_name</code> --&gt; <code>column_name</code> (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/822">#822</a>) - Thanks <a href="https://github.com/togami2864"><code>@​togami2864</code></a></li> </ul> <h2>[0.31.0] 2023-03-1</h2> <h3>Added</h3> <ul> <li>Support raw string literals for BigQuery dialect (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/812">#812</a>) - Thanks <a href="https://github.com/togami2864"><code>@​togami2864</code></a></li> <li>Support <code>SELECT * REPLACE &lt;Expr&gt; AS &lt;Identifier&gt;</code> in BigQuery dialect (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/798">#798</a>) - Thanks <a href="https://github.com/togami2864"><code>@​togami2864</code></a></li> <li>Support byte string literals for BigQuery dialect (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/802">#802</a>) - Thanks <a href="https://github.com/togami2864"><code>@​togami2864</code></a></li> <li>Support columns definition list for system information functions in RedShift dialect (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/769">#769</a>) - Thanks <a href="https://github.com/mskrzypkows"><code>@​mskrzypkows</code></a></li> <li>Support <code>TRANSIENT</code> keyword in Snowflake dialect (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/807">#807</a>) - Thanks <a href="https://github.com/mobuchowski"><code>@​mobuchowski</code></a></li> <li>Support <code>JSON</code> keyword (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/799">#799</a>) - Thanks <a href="https://github.com/togami2864"><code>@​togami2864</code></a></li> <li>Support MySQL Character Set Introducers (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/788">#788</a>) - Thanks <a href="https://github.com/mskrzypkows"><code>@​mskrzypkows</code></a></li> </ul> <h3>Fixed</h3> <ul> <li>Fix clippy error in ci (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/803">#803</a>) - Thanks <a href="https://github.com/togami2864"><code>@​togami2864</code></a></li> <li>Handle offset in map key in BigQuery dialect (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/797">#797</a>) - Thanks <a href="https://github.com/Ziinc"><code>@​Ziinc</code></a></li> <li>Fix a typo (precendence -&gt; precedence) (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/794">#794</a>) - Thanks <a href="https://github.com/SARDONYX-sard"><code>@​SARDONYX-sard</code></a></li> <li>use post_* visitors for mutable visits (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/789">#789</a>) - Thanks <a href="https://github.com/lovasoa"><code>@​lovasoa</code></a></li> </ul> <h3>Changed</h3> <ul> <li>Add another known user (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/787">#787</a>) - Thanks <a href="https://github.com/joocer"><code>@​joocer</code></a></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="5f815c2b08"><code>5f815c2</code></a> (cargo-release) version 0.32.0</li> <li><a href="1d358592ab"><code>1d35859</code></a> Changelog for 0.32.0 (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/830">#830</a>)</li> <li><a href="7f4c9132d7"><code>7f4c913</code></a> Fix table alias parsing regression in 0.31.0 by backing out redshift column d...</li> <li><a href="d69b875367"><code>d69b875</code></a> ClickHouse CREATE TABLE Fixes: add ORDER BY and fix clause ordering (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/824">#824</a>)</li> <li><a href="1cf913e717"><code>1cf913e</code></a> feat: Support PostgreSQL exponentiation. (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/813">#813</a>)</li> <li><a href="fbbf1a4e84"><code>fbbf1a4</code></a> feat: support <code>BIGNUMERIC</code> of bigquery (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/811">#811</a>)</li> <li><a href="b45306819c"><code>b453068</code></a> Add support for trailing commas (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/810">#810</a>)</li> <li><a href="2285bb44ba"><code>2285bb4</code></a> chore: fix typo (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/822">#822</a>)</li> <li><a href="b838415276"><code>b838415</code></a> (cargo-release) version 0.31.0</li> <li><a href="66ec634c67"><code>66ec634</code></a> Update CHANGELOG for version 0.31 (<a href="https://redirect.github.com/sqlparser-rs/sqlparser-rs/issues/820">#820</a>)</li> <li>Additional commits viewable in <a href="https://github.com/sqlparser-rs/sqlparser-rs/compare/v0.30.0...v0.32.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- **Note:** Dependabot was ignoring updates to this dependency, but since you've updated it yourself we've started tracking it for you again. 🤖 <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-03-15 18:33:09 +01:00
Stefan Holderbach	1701303279	Bump to 0.77.1 development version (#8453) ... # Description Either to be used in an emergency point release or to indicate development builds in the `version` command	2023-03-14 23:26:08 +01:00
Stefan Holderbach	fd09609b44	Bump version to 0.77.0 (#8410)	2023-03-14 20:46:42 +02:00
Stefan Holderbach	c7583ecdb7	Pin to reedline 0.17 (#8441) ... # Description See release notes: https://github.com/nushell/reedline/releases/tag/v0.17.0	2023-03-14 00:04:36 +01:00
Stefan Holderbach	4eec4a27c7	Pin to nu-ansi-term 0.47 (#8440) ... # Description Update reedline to a commit that uses the same version as we share types # User-Facing Changes (-) # Tests + Formatting Build check	2023-03-13 23:38:18 +01:00
Reilly Wood	03e688ea7b	Revert to notify v4 (#8367) ... This reverts https://github.com/nushell/nushell/pull/8114 which upgraded to `notify` (a file watching crate used by the `watch` command) v5. `notify` v5 has several breaking changes and it's much harder to use. It no longer includes debouncing of file system events, which I think is essential functionality for `watch`. @WindSoilder was going to try writing our own debouncing functionality but I don't think he had time to finish it. @WindSoilder Is it OK if we revert this for the 0.77 release (March 14)? We can try again for 0.78	2023-03-08 21:45:58 -08:00
dependabot[bot]	b7a34498e3	Bump rust-embed from 6.4.1 to 6.6.0 (#8330) ... Bumps [rust-embed](https://github.com/pyros2097/rust-embed) from 6.4.1 to 6.6.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pyrossh/rust-embed/blob/master/changelog.md">rust-embed's changelog</a>.</em></p> <blockquote> <h2>[6.6.0] - 2023-03-05</h2> <ul> <li>sort_by_file_name() requires walkdir v2.3.2 <a href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/206">#206</a></li> <li>Add <code>mime-guess</code> feature to statically store mimetype <a href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/192">#192</a></li> </ul> <h2>[6.4.2] - 2022-10-20</h2> <ul> <li>Fail the proc macro if include/exclude are used without the feature <a href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/187">#187</a></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li>See full diff in <a href="https://github.com/pyros2097/rust-embed/commits">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-03-05 19:36:14 -08:00
dependabot[bot]	10fd3115c2	Bump rayon from 1.6.1 to 1.7.0 (#8328) ... Bumps [rayon](https://github.com/rayon-rs/rayon) from 1.6.1 to 1.7.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/rayon-rs/rayon/blob/master/RELEASES.md">rayon's changelog</a>.</em></p> <blockquote> <h1>Release rayon 1.7.0 / rayon-core 1.11.0 (2023-03-03)</h1> <ul> <li>The minimum supported <code>rustc</code> is now 1.59.</li> <li>Added a fallback when threading is unsupported.</li> <li>The new <code>ParallelIterator::take_any</code> and <code>skip_any</code> methods work like unordered <code>IndexedParallelIterator::take</code> and <code>skip</code>, counting items in whatever order they are visited in parallel.</li> <li>The new <code>ParallelIterator::take_any_while</code> and <code>skip_any_while</code> methods work like unordered <code>Iterator::take_while</code> and <code>skip_while</code>, which previously had no parallel equivalent. The &quot;while&quot; condition may be satisfied from anywhere in the parallel iterator, affecting all future items regardless of position.</li> <li>The new <code>yield_now</code> and <code>yield_local</code> functions will cooperatively yield execution to Rayon, either trying to execute pending work from the entire pool or from just the local deques of the current thread, respectively.</li> </ul> <h1>Release rayon-core 1.10.2 (2023-01-22)</h1> <ul> <li>Fixed miri-reported UB for SharedReadOnly tags protected by a call.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="7ffaf3463b"><code>7ffaf34</code></a> Merge <a href="https://github-redirect.dependabot.com/rayon-rs/rayon/issues/716">#716</a></li> <li><a href="163003e0e3"><code>163003e</code></a> bump the release date</li> <li><a href="f7d75532fc"><code>f7d7553</code></a> Release rayon 1.3.0 / rayon-core 1.7.0</li> <li><a href="b98bb23f05"><code>b98bb23</code></a> Remove unneeded extern crate statements</li> <li><a href="9b92c7deb9"><code>9b92c7d</code></a> cargo fmt</li> <li><a href="e02f439bbf"><code>e02f439</code></a> Remove useless 'use crate;' in favor of the crate prelude</li> <li><a href="a1db0fe390"><code>a1db0fe</code></a> Fix clippy::flat_map_identity</li> <li><a href="4e4025693f"><code>4e40256</code></a> Update ci/compat-Cargo.lock</li> <li><a href="1f9d117d51"><code>1f9d117</code></a> Remove cfg(rayon_unstable)</li> <li><a href="198ca7f6aa"><code>198ca7f</code></a> Remove rayon-futures</li> <li>Additional commits viewable in <a href="https://github.com/rayon-rs/rayon/compare/rayon-core-v1.6.1...rayon-core-v1.7.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-03-05 19:32:16 -08:00
Filip Andersson	f6ca62384e	changes Reqwest to Ureq. (#8320) ... # Description _(Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes.)_ This pull request removes `Reqwest` and replaces it with `Ureq` to remove some of our dependencies, giving us faster compile times as well as smaller binaries. `Ureq` does not have an async runtime included so we do not need build heavy dependencies such as `Tokio`. From older tests I had the number of build units be reduced from `430 -> 392`. The default of `Ureq` uses `Rustls` but it has been configured to instead use `native_tls` which should work exactly the same as the `tls` works now. I removed `content-length` from the http commands as after refactoring i did not see a reason to have it available, correct me if this is something we should preserve. In the medium, to long term, we should maybe consider changing to `rustls` to have the same `tls` on all platforms. # User-Facing Changes _(List of all changes that impact the user experience here. This helps us keep track of breaking changes.)_ # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-03-05 14:48:13 -08:00
Reilly Wood	f93033c20b	Fix CPU usage info in sys (#8321) ... Closes #8264. This PR does a few things to fix the `usage` column in `sys.cpu`: 1. Sleep a while (~400ms) between calls to `sys.refresh_cpu()`, [as required by `sysinfo`](https://docs.rs/sysinfo/latest/sysinfo/trait.SystemExt.html#method.refresh_cpu) 2. Change `sys` to return a `LazyRecord` (so you can do things like `sys | get host` instantly without waiting for CPU info) 3. Update our `sysinfo` dependency to [fix CPU usage calculations on Linux](https://github.com/GuillaumeGomez/sysinfo/pull/946) CPU usage is no longer always reported as zero: 	2023-03-04 14:48:34 -08:00
Jérémy Audiger	a7b5bd18ba	Shadow rs dep (#8298) ... # Description While looking at the recent MR merged, I noticed that a dependency was no more used with https://github.com/nushell/nushell/pull/8280. # User-Facing Changes None. # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-03-03 09:41:13 -08:00
Jérémy Audiger	c1d76bfac7	Add unit tests for HTTP commands. (#8267) ... # Description Following the comment from @fdncred: https://github.com/nushell/nushell/pull/8144#issuecomment-1442514338. I added some unit tests for HTTP commands. The tests are not exhaustive, but at least, this is a first good step IMO. # User-Facing Changes None. # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-03-02 11:05:18 -08:00
Michael Angerman	5bf077d64f	remove left over build.rs from nu-command (#8280) ... @fdncred pointed out to me that post creation of the nu-cmd-lang crate we probably don't need an extra build.rs file in nu-command any longer now that the version command (and build.rs) is located in nu-cmd-lang... I am removing the redundancy...	2023-03-01 09:30:58 -08:00
dependabot[bot]	a09aaf3495	Bump csv from 1.1.6 to 1.2.0 (#8235) ... Bumps [csv](https://github.com/BurntSushi/rust-csv) from 1.1.6 to 1.2.0. <details> <summary>Commits</summary> <ul> <li><a href="fa01b78533"><code>fa01b78</code></a> 1.2.0</li> <li><a href="2ba20b55d9"><code>2ba20b5</code></a> readme: various updates</li> <li><a href="521294f87b"><code>521294f</code></a> msrv: set rust-version = 1.60</li> <li><a href="31c8ebc49d"><code>31c8ebc</code></a> readme: updates and set rust-version</li> <li><a href="a0e83883e2"><code>a0e8388</code></a> deps: drop 'bstr'</li> <li><a href="9e1126a3f4"><code>9e1126a</code></a> cargo: update some fields</li> <li><a href="d7a4f7dcc6"><code>d7a4f7d</code></a> rust: move to 2021 edition</li> <li><a href="022ac05205"><code>022ac05</code></a> error: drop 'source' impl</li> <li><a href="9ab83111a7"><code>9ab8311</code></a> *: better import grouping and short hand struct init</li> <li><a href="ea0273c531"><code>ea0273c</code></a> *: fix all warnings and update code</li> <li>Additional commits viewable in <a href="https://github.com/BurntSushi/rust-csv/compare/1.1.6...1.2.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-02-27 19:48:51 +13:00
dependabot[bot]	ffc8e752a5	Bump bytesize from 1.1.0 to 1.2.0 (#8236) ... Bumps [bytesize](https://github.com/hyunsik/bytesize) from 1.1.0 to 1.2.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/hyunsik/bytesize/releases">bytesize's releases</a>.</em></p> <blockquote> <h2>Release 1.2.0</h2> <h2>Changes</h2> <ul> <li>serde improvements <a href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/29">#29</a> (<a href="https://github.com/joeroback"><code>@​joeroback</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="476dc867b2"><code>476dc86</code></a> Remove -dev suffix for release</li> <li><a href="eaaf3bc097"><code>eaaf3bc</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/29">#29</a> from joeroback/serde_improvements</li> <li><a href="c7a785bd2c"><code>c7a785b</code></a> resolves <a href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/27">#27</a>, fixes several clippy warnings with u16/u8 and is_digit/is_ascii...</li> <li><a href="db44636f05"><code>db44636</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/28">#28</a> from ileixe/master</li> <li><a href="58cf4a5024"><code>58cf4a5</code></a> Change as_u64() to const</li> <li><a href="065c00b54f"><code>065c00b</code></a> Change the crate version to 1.2.0-dev</li> <li>See full diff in <a href="https://github.com/hyunsik/bytesize/compare/v1.1.0...v1.2.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-02-27 19:48:14 +13:00
Michael Angerman	585e104608	Cratification: Break out nu_cmd_lang into a separate crate (#8181) ... # Description This breaks out the core_commands into a separate crate called nu_cmd_lang _(Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes.)_ _(Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience.)_ # User-Facing Changes _(List of all changes that impact the user experience here. This helps us keep track of breaking changes.)_ # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-02-24 09:54:42 -06:00
WindSoilder	0e86ba4b63	Dependency update: update notify version to v5 (#8114) ... # Description Relative: #8060 While investigating, I found we need to update notify, which is a good step to remove some duplicate dependencies. As title, here are some goods and bads after updating: ## Good keep dependency up to date, and remove duplidate dependency(cfg-if, winapi) in Cargo.lock. ## Bad Introduce some breaking changes: After updating to notify v5, I found that we have to remove `Rename` events. But I've testing under notify v4, and it doesn't work good if we running the following command on MacOS: ``` touch a mv a b ``` It fires file create event, but no file rename event. So `rename` event is not really reliable, so I think it's ok for us to remove `Rename` events. The reason to remove `--debounce-ms` flag: It's not provided by defualt file watcher, we can use [PollWatcher](https://docs.rs/notify/latest/notify/poll/struct.PollWatcher.html), but it scans filesystem, which is really expensive. So I just remove the flag. # User-Facing Changes 1. `--debounce-ms` flag is removed 2. no longer watch `Rename` event. # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-02-22 13:35:09 -08:00
dependabot[bot]	81dd4a8450	Bump uuid from 1.2.2 to 1.3.0 (#8130) ... Bumps [uuid](https://github.com/uuid-rs/uuid) from 1.2.2 to 1.3.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/uuid-rs/uuid/releases">uuid's releases</a>.</em></p> <blockquote> <h2>1.3.0</h2> <h2>What's Changed</h2> <ul> <li>Fix error message. by <a href="https://github.com/basbossink-ds"><code>@​basbossink-ds</code></a> in <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/656">uuid-rs/uuid#656</a></li> <li>implement Arbitrary::size_hint by <a href="https://github.com/Ekleog"><code>@​Ekleog</code></a> in <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/657">uuid-rs/uuid#657</a></li> <li>Always use hyphenated format regardless of flags by <a href="https://github.com/KodrAus"><code>@​KodrAus</code></a> in <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/658">uuid-rs/uuid#658</a></li> <li>Update windows-sys requirement from 0.42.0 to 0.45.0 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/654">uuid-rs/uuid#654</a></li> <li>Prepare for 1.3.0 release by <a href="https://github.com/KodrAus"><code>@​KodrAus</code></a> in <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/659">uuid-rs/uuid#659</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/basbossink-ds"><code>@​basbossink-ds</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/656">uuid-rs/uuid#656</a></li> <li><a href="https://github.com/Ekleog"><code>@​Ekleog</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/657">uuid-rs/uuid#657</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/uuid-rs/uuid/compare/1.2.2...1.3.0">https://github.com/uuid-rs/uuid/compare/1.2.2...1.3.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="573362627c"><code>5733626</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/659">#659</a> from uuid-rs/cargo/1.3.0</li> <li><a href="59ac047014"><code>59ac047</code></a> prepare for 1.3.0 release</li> <li><a href="e010787850"><code>e010787</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/654">#654</a> from uuid-rs/dependabot/cargo/windows-sys-0.45.0</li> <li><a href="b90b820603"><code>b90b820</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/658">#658</a> from uuid-rs/fix/alternate-format</li> <li><a href="1af8269957"><code>1af8269</code></a> fix up tests around alternative format</li> <li><a href="e7eaf5b4a2"><code>e7eaf5b</code></a> always use hyphenated format regardless of flags</li> <li><a href="52197cd275"><code>52197cd</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/657">#657</a> from Ekleog/arbitrary-size-hint</li> <li><a href="b362542ee2"><code>b362542</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/656">#656</a> from basbossink-ds/fix/655-deserialize-error-msg</li> <li><a href="212b902277"><code>212b902</code></a> implement Arbitrary::size_hint</li> <li><a href="40d8711f11"><code>40d8711</code></a> Also fix the doc comment</li> <li>Additional commits viewable in <a href="https://github.com/uuid-rs/uuid/compare/1.2.2...1.3.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-02-21 23:32:52 +00:00
Hofer-Julian	101ed629a4	Update polars to 0.27.2 (#8154) ... Mostly to get rid of https://github.com/pola-rs/polars/pull/6098/files This currently breaks nushell's table formatting: ``` nu ❯ open-df forcing.arrow | first could not mmap compressed IPC file, defaulting to normal read╭───┬──────────┬────┬────────┬──────────┬───────┬──────────┬──────┬──────────┬─────╮ │ # │ time │ id │ demand │ drainage │ E_pot │ infiltra │ P │ priority │ ... │ │ │ │ │ │ │ │ tion │ │ │ │ ├───┼──────────┼────┼────────┼──────────┼───────┼──────────┼──────┼──────────┼─────┤ │ 0 │ 4 years │ 1 │ 0.00 │ 0.02 │ 0.00 │ 0.00 │ 0.00 │ 4.00 │ ... │ │ │ ago │ │ │ │ │ │ │ │ │ ╰───┴──────────┴────┴────────┴──────────┴───────┴──────────┴──────┴──────────┴─────╯ ``` @visr	2023-02-21 23:32:28 +00:00
Stefan Holderbach	95ec2fcce7	Update to 0.76.1 version for development (#8161) ... # Description For tracking in `version` for bug reports during development. Might be used for an urgent hotfix if necessary.	2023-02-21 23:21:39 +00:00
Stefan Holderbach	bc38a6a795	Bump version for 0.76.0 release (#8121) ... Before landing: - [x] `reedline 0.16.0` is out and pinned. - [x] all fixes and features necessary are landed. In the meantime: - [ ] feed the release notes with relevant features and breaking changes	2023-02-21 20:46:29 +00:00
Stefan Holderbach	ca09dbbbee	Pin reedline to 0.16.0 (#8142) ... # Description See release notes: https://github.com/nushell/reedline/releases/tag/v0.16.0 # User-Facing Changes Only internal # Tests + Formatting (-)	2023-02-20 21:44:04 +00:00
Bob Hyman	0a8c9b22b0	string | fill counts clusters, not graphemes; and doesn't count ANSI escape codes (#8134) ... Enhancement of new `fill` command (#7846) to handle content including ANSI escape codes for formatting or multi-code-point Unicode grapheme clusters. In both of these cases, the content is (many) bytes longer than its visible length, and `fill` was counting the extra bytes so not adding enough fill characters. # Description This script: ```rust # the teacher emoji `\u{1F9D1}\u{200D}\u{1F3EB}` is 3 code points, but only 1 print position wide. echo "This output should be 3 print positions wide, with leading and trailing `+`" $"\u{1F9D1}\u{200D}\u{1F3EB}" | fill -c "+" -w 3 -a "c" echo "This output should be 3 print positions wide, with leading and trailing `+`" $"(ansi green)a(ansi reset)" | fill -c "+" -w 3 -a c echo "" ``` Was producing this output: ```rust This output should be 3 print positions wide, with leading and trailing `+` 🧑‍🏫 This output should be 3 print positions wide, with leading and trailing `+` a ``` After this PR, it produces this output: ```rust This output should be 3 print positions wide, with leading and trailing `+` +🧑‍🏫+ This output should be 3 print positions wide, with leading and trailing `+` +a+ ``` # User-Facing Changes Users may have to undo fixes they may have introduced to work around the former behavior. I have one such in my prompt string that I can now revert. # Tests + Formatting Don't forget to add tests that cover your changes. -- Done Make sure you've run and fixed any issues with these commands: - [x] `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - [x] `cargo test --workspace` to check that all tests pass # After Submitting `fill` command not documented in the book, and it still talks about `str lpad/rpad`. I'll fix. Note added dependency on a new library `print-positions`, which is an iterator that yields a complete print position (cluster + Ansi sequence) per call. Should this be vendored?	2023-02-20 06:32:20 -06:00
dependabot[bot]	527c44ed84	Bump sysinfo from 0.27.7 to 0.28.0 (#8132) ... Bumps [sysinfo](https://github.com/GuillaumeGomez/sysinfo) from 0.27.7 to 0.28.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/GuillaumeGomez/sysinfo/blob/master/CHANGELOG.md">sysinfo's changelog</a>.</em></p> <blockquote> <h1>0.28.0</h1> <ul> <li>Linux: Fix name and CPU usage for processes tasks.</li> <li>unix: Keep all users, even &quot;not real&quot; accounts.</li> <li>Windows: Use SID for Users ID.</li> <li>Fix C API.</li> <li>Disable default cdylib compilation.</li> <li>Add <code>serde</code> feature to enable serialization.</li> <li>Linux: Handle <code>Idle</code> state in <code>ProcessStatus</code>.</li> <li>Linux: Add brand and name of ARM CPUs.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li>See full diff in <a href="https://github.com/GuillaumeGomez/sysinfo/commits">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-02-19 20:58:07 -06:00
dependabot[bot]	8ee015a847	Bump winreg from 0.10.1 to 0.11.0 (#8128) ... Bumps [winreg](https://github.com/gentoo90/winreg-rs) from 0.10.1 to 0.11.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/gentoo90/winreg-rs/blob/master/CHANGELOG.md">winreg's changelog</a>.</em></p> <blockquote> <h2>0.11.0</h2> <ul> <li>Migrate to the 2018 edition of Rust</li> <li>Move the code from <code>lib.rs</code> to separate files</li> <li>Use <a href="https://crates.io/crates/cfg-if"><code>cfg-if</code></a> instead of <code>build.rs</code> to fail build on non-windows systems</li> <li>Reimplement deserialization logic, implement [de]serialization for byte arrays (<a href="https://github-redirect.dependabot.com/gentoo90/winreg-rs/issues/49">#49</a>)</li> <li>Fix some typos and <code>clippy</code> warnings</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="f34742d674"><code>f34742d</code></a> Bump version to 0.11.0</li> <li><a href="75f2593f62"><code>75f2593</code></a> Move the changelog to a separate file</li> <li><a href="1f6f877ed7"><code>1f6f877</code></a> Fix some clippy warnings</li> <li><a href="7a32d642cd"><code>7a32d64</code></a> Implement [de]serialization for byte arrays</li> <li><a href="8464557c2d"><code>8464557</code></a> Reimplement deserialization logic</li> <li><a href="9e8dc28029"><code>9e8dc28</code></a> Put serialization tests into a separate file</li> <li><a href="04f7d232c7"><code>04f7d23</code></a> Use <code>cfg-if</code> to fail build on non-windows systems</li> <li><a href="c3ac5ba5ea"><code>c3ac5ba</code></a> Move the code from <code>lib.rs</code> to separate files</li> <li><a href="17378a9ca4"><code>17378a9</code></a> Migrate to the 2018 edition of Rust</li> <li><a href="f4d45923ab"><code>f4d4592</code></a> Remove Appveyor. It's broken anyway</li> <li>Additional commits viewable in <a href="https://github.com/gentoo90/winreg-rs/compare/v0.10.1...v0.11.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-02-19 20:57:46 -06:00
Darren Schroeder	4c787af26d	relocate debug commands (#8071) ... # Description Now that we've landed the debug commands we were working on, let's relocate them to an easier place to find all of them. That's what this PR does. The only actual code change was changing the `timeit` command to a `Category::Debug` command. The rest is just moving things around and hooking them up. # User-Facing Changes # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-02-13 16:39:07 +00:00
WindSoilder	208ffdc1da	Move some from xxx commands to plugin (#7942) ... # Description From nushell 0.8 philosophy: https://github.com/nushell/nushell.github.io/blob/main/contributor-book/philosophy_0_80.md#core-categories > The following categories should be moved to plugins: Uncommon format support So this pr is trying to move following commands to plugin: - [X] from eml - [x] from ics - [x] from ini - [x] from vcf And we can have a new plugin handles for these formatting, currently it's implemented here: https://github.com/WindSoilder/nu_plugin_format The command usage should be the same to original command. If it's ok, the plugin can support more formats like [parquet](https://github.com/fdncred/nu_plugin_from_parquet), or [EDN format](https://github.com/nushell/nushell/issues/6415), or something else. Just create a draft pr to show what's the blueprint looks like, and is it a good direction to move forward? # User-Facing Changes _(List of all changes that impact the user experience here. This helps us keep track of breaking changes.)_ # Tests + Formatting Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass # After Submitting If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.	2023-02-13 12:42:08 +00:00
dependabot[bot]	90a2352337	Bump roxmltree from 0.17.0 to 0.18.0 (#8065) ... Bumps [roxmltree](https://github.com/RazrFalcon/roxmltree) from 0.17.0 to 0.18.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/RazrFalcon/roxmltree/blob/master/CHANGELOG.md">roxmltree's changelog</a>.</em></p> <blockquote> <h2>[0.18.0] - 2023-02-04</h2> <h3>Added</h3> <ul> <li><code>StringStorage</code> that exposes an internal string storage.</li> <li>Allocated strings are stored as <code>Arc&lt;str&gt;</code> and not <code>String</code> now.</li> <li><code>Node::text_storage</code></li> <li><code>Node::tail_storage</code></li> <li><code>Attribute::value_storage</code></li> <li><code>Node::range</code></li> </ul> <h3>Removed</h3> <ul> <li><code>Node::position</code>. Use <code>Node::range</code> instead.</li> </ul> <h3>Fixed</h3> <ul> <li>Some methods return longer lifetimes now. Thanks to <a href="https://github.com/adamreichold"><code>@​adamreichold</code></a></li> <li>Overly verbose Debug implementations. Thanks to <a href="https://github.com/adamreichold"><code>@​adamreichold</code></a></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="8f6f14bbc7"><code>8f6f14b</code></a> Version bump.</li> <li><a href="c4d622fccc"><code>c4d622f</code></a> Store node's end position again.</li> <li><a href="3d33827a75"><code>3d33827</code></a> Use ref-counted owned strings.</li> <li><a href="e81718610a"><code>e817186</code></a> Expose 'input lifetime where it is the backing lifetime.</li> <li><a href="0b12673528"><code>0b12673</code></a> Use consistent debug impls for the various iterators that avoid formatting th...</li> <li>See full diff in <a href="https://github.com/RazrFalcon/roxmltree/compare/v0.17.0...v0.18.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-02-13 02:35:09 +00:00