# Description
This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.
This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.
The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.
My hope is this will mitigate such senarios
1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241
# Description
(description of your pull request here)
# Tests
Make sure you've done the following:
- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass
# Documentation
- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
# Description
This adds `break`, `continue`, `return`, and `loop`.
* `break` - breaks out a loop
* `continue` - continues a loop at the next iteration
* `return` - early return from a function call
* `loop` - loop forever (until the loop hits a break)
Examples:
```
for i in 1..10 {
if $i == 5 {
continue
}
print $i
}
```
```
for i in 1..10 {
if $i == 5 {
break
}
print $i
}
```
```
def foo [x] {
if true {
return 2
}
$x
}
foo 100
```
```
loop { print "hello, forever" }
```
```
[1, 2, 3, 4, 5] | each {|x|
if $x > 3 { break }
$x
}
```
# User-Facing Changes
Adds the above commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is a set of fixes to `err>` to make it work a bit more predictably.
I've also revised the tests, which accidentally tested the wrong thing
for redirection, but should be more correct now.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This adds support for (limited) mutable variables. Mutable variables are created with mut much the same way immutable variables are made with let.
Mutable variables allow mutation via the assignment operator (=).
❯ mut x = 100
❯ $x = 200
❯ print $x
200
Mutable variables are limited in that they're only tended to be used in the local code block. Trying to capture a local variable will result in an error:
❯ mut x = 123; {|| $x }
Error: nu::parser::expected_keyword (link)
× Capture of mutable variable.
The intent of this limitation is to reduce some of the issues with mutable variables in general: namely they make code that's harder to reason about. By reducing the scope that a mutable variable can be used it, we can help create local reasoning about them.
Mutation can occur with fields as well, as in this case:
❯ mut y = {abc: 123}
❯ $y.abc = 456
❯ $y
On a historical note: mutable variables are something that we resisted for quite a long time, leaning as much as we could on the functional style of pipelines and dataflow. That said, we've watched folks struggle to work with reduce as an approximation for patterns that would be trivial to express with local mutation. With that in mind, we're leaning towards the happy path.
* New "display_output" hook.
* Fix unrelated "clippy" complaint in nu-tables crate.
* Fix code-formattng and style issues in "display_output" hook
* Enhance eval_hook to return PipelineData.
This allows a hook (including display_output) to return a value.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Allows use of slightly optimized variants that check if they have to use
the heavier vte parser. Tries to avoid unnnecessary allocations. Initial
performance characteristics proven out in #4378.
Also reduces boilerplate with right-ward drift.
This is a de-facto standard supported by many terminals, originally
added to macOS Terminal.app, now also supported by VTE (GNOME),
Konsole (KDE), WezTerm, and more.
* Add a 'commandline' command for manipulating the current buffer
from `executehostcommand` keybindings. Inspired by fish:
https://fishshell.com/docs/current/cmds/commandline.html
* Update to development reedline
Includes nushell/reedline#472
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* Terminate REPL if not connected to tty input
If the standard input stream is not a TTY abort the REPL execution.
Solves a problem as the current REPL tries to be IO fault tolerant and
would indefinetely fail when crossterm tries to handle the STDIN.
Fixesnushell/nushell#6452
* Improve the error message
* Avoid update_last_command_context "No command run" error
When using `executehostcommand` bindings without having run actual user input commands yet,
update_last_command_context is guaranteed to fail. A function has been added to reedline
that allows checking for this case.
* Update to most recent reedline
Includes bugfixes around the (SQlite) history
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* add a new welcome banner to nushell
* remove top line
* tweaked colors and wording
* changed to dimmed white
* removed a comment
* make config nu stand out a little
* fix type-o
* Remove comment
* Split delta and environment merging
* Move table mode to a more logical place
* Cleanup
* Merge environment after reading default_env.nu
* Fmt
* (WIP) Initial messy support for hooks as strings
* Cleanup after running condition & hook code
Also, remove prints
* Move env hooks eval into its own function
* Add env change hooks to simulator
* Fix hooks simulator not running env hooks properly
* Add missing hooks test file
* Expand hooks tests
* Add blocks as env hooks; Preserve hook environment
* Add full eval to pre prompt/exec hooks; Fix panic
* Rename env change hook back to orig. name
* Print err on test failure; Add list of hooks test
* Consolidate condition block; Fix panic; Misc
* CHange test to use real file
* Remove unused stuff
* Fix potential panics; Clean up errors
* Remove commented unused code
* Clippy: Fix extra references
* Add back support for old-style hooks
* Reorder functions; Fmt
* Fix test on Windows
* Add more test cases; Simplify some error reporting
* Add more tests for setting correct before/after
* Move pre_prompt hook to the beginning
Since we don't have a prompt or blocking on user input, all hooks just
follow after each other.
This PR adds support for an SQLite history via nushell/reedline#401
The SQLite history is enabled by setting history_file_format: "sqlite" in config.nu.
* somewhat working sqlite history
* Hook up history command
* Fix error in SQlitebacked with empty lines
When entering an empty line there previously was the "No command run"
error with `SqliteBackedHistory` during addition of the metadata
May be considered a temporary fix
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
Added CMD_FINISHED_MARKER to be emitted when command finishes.
Also switched the names PRE_EXECUTE_MARKER and PRE_PROMPT_MARKER
as the old names were confusing/wrong.
* WIP: Start laying overlays
* Rename Overlay->Module; Start adding overlay
* Revamp adding overlay
* Add overlay add tests; Disable debug print
* Fix overlay add; Add overlay remove
* Add overlay remove tests
* Add missing overlay remove file
* Add overlay list command
* (WIP?) Enable overlays for env vars
* Move OverlayFrames to ScopeFrames
* (WIP) Move everything to overlays only
ScopeFrame contains nothing but overlays now
* Fix predecls
* Fix wrong overlay id translation and aliases
* Fix broken env lookup logic
* Remove TODOs
* Add overlay add + remove for environment
* Add a few overlay tests; Fix overlay add name
* Some cleanup; Fix overlay add/remove names
* Clippy
* Fmt
* Remove walls of comments
* List overlays from stack; Add debugging flag
Currently, the engine state ordering is somehow broken.
* Fix (?) overlay list test
* Fix tests on Windows
* Fix activated overlay ordering
* Check for active overlays equality in overlay list
This removes the -p flag: Either both parser and engine will have the
same overlays, or the command will fail.
* Add merging on overlay remove
* Change help message and comment
* Add some remove-merge/discard tests
* (WIP) Track removed overlays properly
* Clippy; Fmt
* Fix getting last overlay; Fix predecls in overlays
* Remove merging; Fix re-add overwriting stuff
Also some error message tweaks.
* Fix overlay error in the engine
* Update variable_completions.rs
* Adds flags and optional arguments to view-source (#5446)
* added flags and optional arguments to view-source
* removed redundant code
* removed redundant code
* fmt
* fix bug in shell_integration (#5450)
* fix bug in shell_integration
* add some comments
* enable cd to work with directory abbreviations (#5452)
* enable cd to work with abbreviations
* add abbreviation example
* fix tests
* make it configurable
* make cd recornize symblic link (#5454)
* implement seq char command to generate single character sequence (#5453)
* add tmp code
* add seq char command
* Add split number flag in `split row` (#5434)
Signed-off-by: Yuheng Su <gipsyh.icu@gmail.com>
* Add two more overlay tests
* Add ModuleId to OverlayFrame
* Fix env conversion accidentally activating overlay
It activated overlay from permanent state prematurely which would
cause `overlay add` to misbehave.
* Remove unused parameter; Add overlay list test
* Remove added traces
* Add overlay commands examples
* Modify TODO
* Fix $nu.scope iteration
* Disallow removing default overlay
* Refactor some parser errors
* Remove last overlay if no argument
* Diversify overlay examples
* Make it possible to update overlay's module
In case the origin module updates, the overlay add loads the new module,
makes it overlay's origin and applies the changes. Before, it was
impossible to update the overlay if the module changed.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Co-authored-by: pwygab <88221256+merelymyself@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
Co-authored-by: Yuheng Su <gipsyh.icu@gmail.com>
Changes to reedline since `v0.4.0`:
- vi normal mode `I` for inserting at line beginning
- `InsertNewline` edit command that can be bound to `Alt-Enter` if
desired to have line breaks without relying on the `Validator`
- `ClearScreen` will directly clear the visible screen. `Signal::CtrlL` has been
removed.
- `ClearScrollback` will clear the screen and scrollback. Can be used to
mimic macOS `Cmd-K` screen clearing. Helps with #5089
