# Description
This PR allows oem code pages to be used in decoding by specifying the
code page number.
## Before
## After (umlauts)
closes https://github.com/nushell/nushell/issues/14168
I abstracted the decoding a bit. Here are my function comments on
how/why.
```rust
// Since we have two different decoding mechanisms, we allow oem_cp to be
// specified by only a number like `open file | decode 850`. If this decode
// parameter parses as a usize then we assume it was intentional and use oem_cp
// crate. Otherwise, if it doesn't parse as a usize, we assume it was a string
// and use the encoding_rs crate to try and decode it.
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixes#14176
# Description
Since the Linux `/usr/bin/clear` binary doesn't exhibit the issue in
#14176, I checked to see what ANSI escapes it is emitting:
```nu
nu -c '^clear; "111\n222\n333"' | less
# or
bash -c 'clear -x; echo -e "111\n222\n333"' | less
```
Both show the same thing:
```
ESC[HESC[2JESC[3J111
222
333
(END)
```
This is the equivalent of:
```nu
$"(ansi home)(ansi clear_entire_screen)(ansi clear_entire_screen_plus_buffer)111\n222\n333"
```
However, our internal `clear` is sending only the Home and 3J. While
this *should*, in theory, work, it's (a) clear that it doesn't, and (b)
`/usr/bin/clear` seemingly knows this and already has the solution (or
at least workaround). From looking at the `ncurses` source, it appears
it is getting this information from the terminal capabilities. That
said, support for `2J` and `3J` is fairly universal, and it's what we
send in `clear` and `clear --keep-scrollback` anyway, so there's no harm
AFAICT in sending both like `/usr/bin/clear` does.
Also tested and fixes the issue on Windows. Note that PowerShell
`Clear-Host` also did not have the issue.
Side-note: It's interesting that on Tmux, which doesn't support 2J and
3J, that `/usr/bin/clear` knows this and doesn't send those codes,
sending just an escape-[J instead. However, Nushell's `clear`, of
course, isn't checking terminal capabilities, and is continuing to send
the unsupported codes. Fortunately this doesn't appear to cause any
issues on Tmux.
# User-Facing Changes
None, AFAICT - Bugfix only.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR adds an indicator when listing subcommands. That indicator tells
whether the command is a plugin, alias, or custom_command.
I changed some of the API to make this work a little easier, namely
`get_signatures()` is now `get_signatures_and_declids()`. It was used in
only one other place (run-external), so I thought it was fine to change
it.
There is a long-standing issue with aliases where they reference the
command name instead of the alias name. This PR doesn't fix that bug.
Example.
```nushell
❯ alias "str fill" = str wrap
```
```nushell
❯ str
... other stuff
Subcommands:
str wrap (alias) - Alias for `str wrap`
str wrap (plugin) - Wrap text passed into pipeline.
```
# User-Facing Changes
Slightly different output of subcommands.
# Description
This PR closes#14137 and allows the display hook to be set on byte
streams. So, with a hook like this below.
```nushell
display_output: {
metadata access {|meta| match $meta.content_type? {
"application/x-nuscript" | "application/x-nuon" | "text/x-nushell" => { nu-highlight },
"application/json" => { ^bat --language=json --color=always --style=plain --paging=never },
_ => {},
}
} | table
}
```
You could type `open toolkit.nu` and the text of toolkit.nu would be
highlighted by nu-highlight. This PR also changes the way content-type
is assigned with `open`. Previously it would only assign it if `--raw`
was specified.
Lastly, it changes the `is_external()` function to only say
`ByteStreamSource::Child`'s are external instead of both Child and
`ByteStreamSource::File`. Again, this was to allow the hook to function
properly. I'm not sure what negative ramifications changing
`is_external()` could have, but there may be some?
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to make `to text` more consistent with how it adds
newlines and also gives you an opt-out --no-newline option.
I wasn't sure how to change the `PipelineData::ByteStream` match arm. I
figure something needs to be done there but I'm not sure how to do it.
# User-Facing Changes
newlines are more consistent.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds the `name` column back to keybindings.
This may be considered a hack since the reedline keybinding has no spot
for name, but it seems to work.
Bumps [uuid](https://github.com/uuid-rs/uuid) from 1.10.0 to 1.11.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/uuid-rs/uuid/releases">uuid's
releases</a>.</em></p>
<blockquote>
<h2>1.11.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Upgrade zerocopy to 0.8 by <a
href="https://github.com/yotamofek"><code>@yotamofek</code></a> in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/771">uuid-rs/uuid#771</a></li>
<li>Prepare for 1.11.0 release by <a
href="https://github.com/KodrAus"><code>@KodrAus</code></a> in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/772">uuid-rs/uuid#772</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/yotamofek"><code>@yotamofek</code></a>
made their first contribution in <a
href="https://redirect.github.com/uuid-rs/uuid/pull/771">uuid-rs/uuid#771</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0">https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="4473398413"><code>4473398</code></a>
Merge pull request <a
href="https://redirect.github.com/uuid-rs/uuid/issues/772">#772</a> from
uuid-rs/cargo/1.11.0</li>
<li><a
href="59fbb1e695"><code>59fbb1e</code></a>
prepare for 1.11.0 release</li>
<li><a
href="d9b34e7c93"><code>d9b34e7</code></a>
Merge pull request <a
href="https://redirect.github.com/uuid-rs/uuid/issues/771">#771</a> from
yotamofek/zerocopy_0.8</li>
<li><a
href="14b24206c6"><code>14b2420</code></a>
Upgrade zerocopy to 0.8</li>
<li>See full diff in <a
href="https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR aims to close#14027, in which it was noticed that the transpose
command "swallows" error messages.
*Note that in exploring the linked issue, [other situations were
identified](https://github.com/nushell/nushell/issues/14027#issuecomment-2414602880)
which also produce inconsistent behaviour. These have knowingly been
omitted from this PR, to minimize its scope, and since they seem to have
a different cause. It's probably best to make a separate issue/PR in
which to tackle a broader scan of error handling, with a suspected
relation to streams.*
# User-Facing Changes
The user will see errors from deeper in the pipeline, in case the errors
originated there.
# Tests + Formatting
Toolkit PR check was run successfully.
One test was added, covering this exact situation, in order to prevent
regressions.
The bug is relatively obscure, so it may be prone to reappear during
refactorings.
Fixes#13757, fixes#9562
# User-Facing Changes
- `unclosed |` is returned for malformed closure parameters:
```
{ |a }
```
- Parameter list closing pipes are highlighted as part of the closure
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Swagger supports lists (a.k.a arrays) in query parameters:
https://swagger.io/docs/specification/v3_0/serialization/
It supports three different styles:
- explode=true
- spaceDelimited
- pipeDelimited
With explode=true being the default and hence most common. It is the
hardest to use inside of nushell, as the others are just a `string join`
away. This commit adds lists with the explode=true format.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Before:
: {a[]: [one two three], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #33:1:1]
1 │ {a[]: [one two three], b: four} | url build-query
· ───────────────┬─────────────── ───────┬───────
· │ ╰── Expected a record with string values
· ╰── value originates from here
╰────
After:
: {a[]: [one two three], b: four} | url build-query
a%5B%5D=one&a%5B%5D=two&a%5B%5D=three&b=four
Despite reading CONTRIBUTING.md I didn't get approval before making the
change. My judgment is that this doesn't qualify as being "change
something significantly".
# Tests + Formatting
I added the Example instance for the automatic tests. I couldn't figure
out how to add an Example for the error case, so I did that with manual
testing. E.g.:
: {a[]: [one two [three]], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #3:1:1]
1 │ {a[]: [one two [three]], b: four} | url build-query
· ────────────────┬──────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
: {a[]: [one two 3hr], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #4:1:1]
1 │ {a[]: [one two 3hr], b: four} | url build-query
· ──────────────┬────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I ran the four cargo commands on my local machine. I had to run the
tests with:
LANG=C and -j 1 and even then I got one failure:
thread 'commands::umkdir::mkdir_umask_permission' panicked at
crates/nu-command/tests/commands/umkdir.rs:148:9:
assertion `left == right` failed: Most *nix systems have 0o00022 as the
umask. So directory permission should be 0o40755 = 0o
40777 & (!0o00022)
left: 16893
right: 16877
but this isn't related to this change (I seem to not be running most
*nix system; and don't have a lot of RAM for the number of cores). The
other three cargo commands didn't have errors or warnings.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I will add the new example to [the
documentation](https://github.com/nushell/nushell.github.io).
# Open questions / possible future work
Things I noticed, and would like to mention and am open to adding, but
don't think I am deep enough in nushell to do them pro-actively.
## Add an argument for the other query parameter list styles
I don't know how frequent they are and I currently don't need them, so
following KISS I didn't add them.
## long input_span marked
In e.g.:
: {a[]: [one two 3hr], b: four} | url build-query
Error: nu:🐚:unsupported_input
× Unsupported input
╭─[entry #4:1:1]
1 │ {a[]: [one two 3hr], b: four} | url build-query
· ──────────────┬────────────── ───────┬───────
· │ ╰── Expected a record with list of string values
· ╰── value originates from here
╰────
the entire record is marked as input_span instead of just the "3hr" that
is causing the problem. Changing that would be trivial, but I'm not deep
enough into nushell to understand all the consequences of changing that.
## Error message says string values despite accepting numbers etc.
The error message said it only accepted strings despite accepting
numbers etc. (anything it can coerce into string). I couldn't find a
good wording myself and that was how it was before. I simply added a
"list of strings".
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
fixes#13835
The `concat` function from `span.rs` assumes that two consecutive span
intervals must overlap. But when parsing `let` and `mut` expressions, we
call `parts_including_redirection` which chains two slices of span and
leads to the above condition not holding. So my solution here is to sort
them after chaining.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes the range contains logic to take the step into account.
```nushell
# before
2 in 1..3.. # true
# now
2 in 1..3.. # false
```
---
I encountered another issue while adding tests. Due to floating point
precision, `2.1 in 1..1.1..3` will return `false`. The floating point
error is even bigger than `f64::EPSILON` (`0.09999999999999876` vs
`2.220446049250313e-16`). This issue disappears with bigger numbers.
I tried a different algorithm (checking if the estimated number of steps
is close enough to any integer) but the results are still pretty bad:
```rust
let n_steps = (value - self.start) / self.step; // 14.999999999999988
(n_steps - n_steps.round()).abs() < f64::EPSILON // returns false
```
Maybe it can be shipped like this, the REPL already has floating point
errors (`1.1 - 1` returns `0.10000000000000009`). Or maybe there's a way
to fix this that I didn't think of. I'm open to ideas! But in any case
performing this kind of checks on a range of floats seems more niche
than doing it on a range of ints.
# User-Facing Changes
Code that depended on this behavior to check if a number is between
`start` and `end` will potentially return a different value.
# Tests + Formatting
# After Submitting
# Description
This PR adds `start_time` to the MacOS `ps -l` command. Was requested in
discord. `start_time` is displayed in `Local` time.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
/cc @cablehead
# Description
This PR adds a couple more options for dealing with try/catch errors. It
adds a `json` version of the error and a `rendered` version of the
error. It also respects the error_style configuration point.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates `group-by` and `split-by` to allow other nushell Values
to be used, namely bools.
### Before
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:2]
1 │ [false, false, true, false, true, false] | group-by | table -e
· ──┬──
· ╰── can't convert bool to string
╰────
```
### After
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
╭───────┬───────────────╮
│ │ ╭───┬───────╮ │
│ false │ │ 0 │ false │ │
│ │ │ 1 │ false │ │
│ │ │ 2 │ false │ │
│ │ │ 3 │ false │ │
│ │ ╰───┴───────╯ │
│ │ ╭───┬──────╮ │
│ true │ │ 0 │ true │ │
│ │ │ 1 │ true │ │
│ │ ╰───┴──────╯ │
╰───────┴───────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Nushell currently depends on three different versions of the `windows`
crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several
dependencies so that the `nu` binary only depends on `0.56.0`.
On my machine, this PR makes `cargo build` about 10% faster.
The polars plugin still uses its own version of the `windows` crate
though, which is not ideal. We'll need to bump the `polars` crate to fix
that, but it breaks a lot of our code. (`polars 1.0` release anyone?)
# Description
This PR adds `like` as a synonym for `=~` and `not-like` as a synonym
for `!~`. This is mainly a quality-of-life change to help those people
who think in sql.
closes#13261
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13967
The key changes lays in `nu-protocol/src/module.rs`, when resolving
import pattern, nushell only needs to bring `$module` with a record
value if it defines any constants.
# User-Facing Changes
```nushell
module spam {}
use spam
```
Will no longer create a `$spam` variable with an empty record.
# Tests + Formatting
Adjusted some tests and added some tests.
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
# Description
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1292279795035668583)
**This is a breaking change, due to the removal of `is_running`.**
Some users find the `plugin list` command confusing, because it doesn't
show anything different after running `plugin add` or `plugin rm`. This
modifies the `plugin list` command to also look at the plugin registry
file to give some idea of how the plugins in engine state differ from
those in the plugin registry file.
The following values of `status` are now produced instead of
`is_running`:
- `added`: The plugin is present in the plugin registry file, but not in
the engine.
- `loaded`: The plugin is present both in the plugin registry file and
in the engine, but is not running.
- `running`: The plugin is currently running, and the `pid` column
should contain its process ID.
- `modified`: The plugin state present in the plugin registry file is
different from the state in the engine.
- `removed`: The plugin is still loaded in the engine, but is not
present in the plugin registry file.
- `invalid`: The data in the plugin registry file couldn't be
deserialized, and the plugin most likely needs to be added again.
Example (`commands` omitted):
```
╭──────┬─────────────────────┬────────────┬───────────┬──────────┬─────────────────────────────────────────────────────┬─────────╮
│ # │ name │ version │ status │ pid │ filename │ shell │
├──────┼─────────────────────┼────────────┼───────────┼──────────┼─────────────────────────────────────────────────────┼─────────┤
│ 0 │ custom_values │ 0.1.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_custom_values │ │
│ 1 │ dbus │ 0.11.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_dbus │ │
│ 2 │ example │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_example │ │
│ 3 │ explore_ir │ 0.3.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_explore_ir │ │
│ 4 │ formats │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_formats │ │
│ 5 │ gstat │ 0.98.1 │ running │ 236662 │ /home/devyn/.cargo/bin/nu_plugin_gstat │ │
│ 6 │ inc │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_inc │ │
│ 7 │ polars │ 0.98.1 │ added │ │ /home/devyn/.cargo/bin/nu_plugin_polars │ │
│ 8 │ query │ 0.98.1 │ removed │ │ /home/devyn/.cargo/bin/nu_plugin_query │ │
│ 9 │ stress_internals │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_stress_internals │ │
╰──────┴─────────────────────┴────────────┴───────────┴──────────┴─────────────────────────────────────────────────────┴─────────╯
```
# User-Facing Changes
To `plugin list`:
* **Breaking:** The `is_running` column is removed and replaced with
`status`. Use `status == running` to filter equivalently.
* The `--plugin-config` from other plugin management commands is now
supported.
* Added an `--engine` flag which behaves more or less like before, and
doesn't load the plugin registry file at all.
* Added a `--registry` flag which only checks the plugin registry file.
All plugins appear as `added` since there is no state to compare with.
Because the default is to check both, the `plugin list` command might be
a little bit slower. If you don't need to check the plugin registry
file, the `--engine` flag does not load the plugin registry file at all,
so it should be just as fast as before.
# Tests + Formatting
Added tests for `added` and `removed` statuses. `modified` and `invalid`
are a bit more tricky so I didn't try.
# After Submitting
- [ ] update documentation that references the `plugin list` command
- [ ] release notes
# Description
Provides the ability to decomes struct columns into seperate columns for
each field:
<img width="655" alt="Screenshot 2024-10-16 at 09 57 22"
src="https://github.com/user-attachments/assets/6706bd36-8d38-4365-b58d-ba82f2d5ba9a">
# User-Facing Changes
- provides a new command `polars unnest` for decomposing struct fields
into separate columns.
# Description
This PR adds a couple more options for dealing with try/catch errors. It
adds a `json` version of the error and a `rendered` version of the
error. It also respects the error_style configuration point.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates `group-by` and `split-by` to allow other nushell Values
to be used, namely bools.
### Before
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:2]
1 │ [false, false, true, false, true, false] | group-by | table -e
· ──┬──
· ╰── can't convert bool to string
╰────
```
### After
```nushell
❯ [false, false, true, false, true, false] | group-by | table -e
╭───────┬───────────────╮
│ │ ╭───┬───────╮ │
│ false │ │ 0 │ false │ │
│ │ │ 1 │ false │ │
│ │ │ 2 │ false │ │
│ │ │ 3 │ false │ │
│ │ ╰───┴───────╯ │
│ │ ╭───┬──────╮ │
│ true │ │ 0 │ true │ │
│ │ │ 1 │ true │ │
│ │ ╰───┴──────╯ │
╰───────┴───────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Nushell currently depends on three different versions of the `windows`
crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several
dependencies so that the `nu` binary only depends on `0.56.0`.
On my machine, this PR makes `cargo build` about 10% faster.
The polars plugin still uses its own version of the `windows` crate
though, which is not ideal. We'll need to bump the `polars` crate to fix
that, but it breaks a lot of our code. (`polars 1.0` release anyone?)
# Description
This PR adds `like` as a synonym for `=~` and `not-like` as a synonym
for `!~`. This is mainly a quality-of-life change to help those people
who think in sql.
closes#13261
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13967
The key changes lays in `nu-protocol/src/module.rs`, when resolving
import pattern, nushell only needs to bring `$module` with a record
value if it defines any constants.
# User-Facing Changes
```nushell
module spam {}
use spam
```
Will no longer create a `$spam` variable with an empty record.
# Tests + Formatting
Adjusted some tests and added some tests.
Closes#13654
# User-Facing Changes
- Short flags are now fully type-checked,
including null and record signatures for literal arguments:
```nushell
def test [-v: record<l: int>] {};
test -v null # error
test -v {l: ""} # error
def test2 [-v: int] {};
let v = ""
test2 -v $v # error
```
- `polars unpivot` `--index`/`--on` and `into value --columns`
now accept `list` values
# Description
[Context on
Discord](https://discord.com/channels/601130461678272522/855947301380947968/1292279795035668583)
**This is a breaking change, due to the removal of `is_running`.**
Some users find the `plugin list` command confusing, because it doesn't
show anything different after running `plugin add` or `plugin rm`. This
modifies the `plugin list` command to also look at the plugin registry
file to give some idea of how the plugins in engine state differ from
those in the plugin registry file.
The following values of `status` are now produced instead of
`is_running`:
- `added`: The plugin is present in the plugin registry file, but not in
the engine.
- `loaded`: The plugin is present both in the plugin registry file and
in the engine, but is not running.
- `running`: The plugin is currently running, and the `pid` column
should contain its process ID.
- `modified`: The plugin state present in the plugin registry file is
different from the state in the engine.
- `removed`: The plugin is still loaded in the engine, but is not
present in the plugin registry file.
- `invalid`: The data in the plugin registry file couldn't be
deserialized, and the plugin most likely needs to be added again.
Example (`commands` omitted):
```
╭──────┬─────────────────────┬────────────┬───────────┬──────────┬─────────────────────────────────────────────────────┬─────────╮
│ # │ name │ version │ status │ pid │ filename │ shell │
├──────┼─────────────────────┼────────────┼───────────┼──────────┼─────────────────────────────────────────────────────┼─────────┤
│ 0 │ custom_values │ 0.1.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_custom_values │ │
│ 1 │ dbus │ 0.11.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_dbus │ │
│ 2 │ example │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_example │ │
│ 3 │ explore_ir │ 0.3.0 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_explore_ir │ │
│ 4 │ formats │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_formats │ │
│ 5 │ gstat │ 0.98.1 │ running │ 236662 │ /home/devyn/.cargo/bin/nu_plugin_gstat │ │
│ 6 │ inc │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_inc │ │
│ 7 │ polars │ 0.98.1 │ added │ │ /home/devyn/.cargo/bin/nu_plugin_polars │ │
│ 8 │ query │ 0.98.1 │ removed │ │ /home/devyn/.cargo/bin/nu_plugin_query │ │
│ 9 │ stress_internals │ 0.98.1 │ loaded │ │ /home/devyn/.cargo/bin/nu_plugin_stress_internals │ │
╰──────┴─────────────────────┴────────────┴───────────┴──────────┴─────────────────────────────────────────────────────┴─────────╯
```
# User-Facing Changes
To `plugin list`:
* **Breaking:** The `is_running` column is removed and replaced with
`status`. Use `status == running` to filter equivalently.
* The `--plugin-config` from other plugin management commands is now
supported.
* Added an `--engine` flag which behaves more or less like before, and
doesn't load the plugin registry file at all.
* Added a `--registry` flag which only checks the plugin registry file.
All plugins appear as `added` since there is no state to compare with.
Because the default is to check both, the `plugin list` command might be
a little bit slower. If you don't need to check the plugin registry
file, the `--engine` flag does not load the plugin registry file at all,
so it should be just as fast as before.
# Tests + Formatting
Added tests for `added` and `removed` statuses. `modified` and `invalid`
are a bit more tricky so I didn't try.
# After Submitting
- [ ] update documentation that references the `plugin list` command
- [ ] release notes
# Description
Provides the ability to decomes struct columns into seperate columns for
each field:
<img width="655" alt="Screenshot 2024-10-16 at 09 57 22"
src="https://github.com/user-attachments/assets/6706bd36-8d38-4365-b58d-ba82f2d5ba9a">
# User-Facing Changes
- provides a new command `polars unnest` for decomposing struct fields
into separate columns.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
The idea comes from @amtoine, I think it would be good to keey
`display_error.exit_code` same value, if user is using default config or
using no config file at all.
# Description
Adds back the `to_ascii_lowercase` deleted in #13802. Also fixes the
error messages having the lowercased value instead of the original
value.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, the `save -p` command updates the progress animation each
time any data is written. This PR rate limits the animation so it
doesn't play as fast.
Here's an asciinema of [current
behavior](https://asciinema.org/a/8RWrWTozQSceqx6tYY7kzblqj) and
[proposed behavior](https://asciinema.org/a/E1pi0gMwMwFcxVHOy9Fv1Kk6R).
# User-Facing Changes
* `save -p` progress bar has a smoother animation
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Adds a simple command for importing history between different file
formats. It essentially opens the history of the format opposite of the
one currently selected, and writes new items to the current history. It
also supports piping, because why not.
As more history backends are added, this may need to be extended -
either make the source explicit, or autodetect based on existing files.
For now it should be good though.
This should replace some of the work-arounds mentioned in
https://github.com/nushell/nushell/issues/9403.
I suspect it will have at least one problem:
https://github.com/nushell/nushell/issues/9403 mentions the history file
might be locked on Windows. That being said, I was able to successfully
import plaintext history into sqlite on Linux, so the command should be
functional at least in that environment.
The locking issue could be solved later by plumbing reedline history to
the command (so that it doesn't have to reopen it). But first, I want to
get some general input on the approach.
# User-Facing Changes
New command: `history import`
# Tests + Formatting
There's a unit test, but didn't add a proper integration test yet. Not
entirely sure how - I see there's the `nu!` macro for that, but not sure
how feasible it's to inspect history generated by commands ran that way.
Could use a hint.2
Closes#13920
# User-Facing Changes
`random binary` and `random chars` now support filesize arguments:
```nushell
random binary 1kb
random chars --length 1kb
```
# Description
Fixes#13991. This was done by more clearly separating the case when a
pipeline is drained vs when it is being written (to a file).
I also added an `OutDest::Print` case which might not be strictly
necessary, but is a helpful addition.
# User-Facing Changes
Bug fix.
# Tests + Formatting
Added a test.
# After Submitting
There are still a few redirection bugs that I found, but they require
larger code changes, so I'll leave them until after the release.
# Description
Apologies - The updated wording I used in the last PR *description* was
not what I actually pushed. I failed to commit and push the last update.
This PR fixes the code to reflect what was described in #14065:
```
-r, --header-row - use the first input column as the table header-row (or keynames when combined with --as-record)
```
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
(And visually confirmed help changes ;-))
# After Submitting
N/A
# Description
@Yethal discovered that `FooterMode::Auto` in the config as
`$env.config.footer_mode = auto` did not work. This PR attempts to fix
that problem by implementing the auto algorithm that was already
supposed to work.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR standardizes updates to the config through a new
`UpdateFromValue` trait. For now, this trait is private in case we need
to make changes to it.
Note that this PR adds some additional `ShellError` cases to create
standard error messages for config errors. A follow-up PR will move
usages of the old error cases to these new ones. This PR also uses
`Type::custom` in lots of places (e.g., for string enums). Not sure if
this is something we want to encourage.
# User-Facing Changes
Should be none.
# Description
The help description on `transpose --header-row/-r` appears to be wrong
(and now that I understand that, it probably explains why it's confused
me for so long).
It currently says:
```
-r, --header-row - treat the first row as column names
```
This just looks wrong - The first **row** of the input data is not
considered. It's the first **column** that is used to create the
header-row of the transposed table.
For example:
To record using `-dr`:
```nu
[[col-names values ];
[foo 1 ]
[bar 5 ]
[baz 7 ]
[cat -12 ]
] | transpose -dr
╭─────┬─────╮
│ foo │ 1 │
│ bar │ 5 │
│ baz │ 7 │
│ cat │ -12 │
╰─────┴─────╯
```
To table using `-r`:
```nu
[[col-names values ];
[foo 1 ]
[bar 5 ]
[baz 7 ]
[cat -12 ]
] | transpose -r
╭───┬─────┬─────┬─────┬─────╮
│ # │ foo │ bar │ baz │ cat │
├───┼─────┼─────┼─────┼─────┤
│ 0 │ 1 │ 5 │ 7 │ -12 │
╰───┴─────┴─────┴─────┴─────╯
```
# User-Facing Changes
Updates the help description to:
```
-r, --header-row - use the first input column as the table header-row (or keynames when combined with --as-record)
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Currently there is a bit of chaos regarding construction of history file
paths. Various pieces of code across a number of crates reimplement the
same/similar logic:
- There is `get_history_path`, but it requires a directory parameter (it
really just joins it with a file name).
- Some places use a const for the directory parameter, others use a
string literal - in all cases the value seems to be `"nushell"`.
- Some places assume the `"nushell"` value, other plumb it down from
close to the top of the call stack.
- Some places use a constant for history file names while others assume
it.
This PR tries to make it so that the history/config path format is
defined in a single places and so dependencies on it are easier to
follow:
- It removes `get_history_path` and adds a `file_path` method to
`HistoryConfig` instead (an extra motivation being, this is a convenient
place that can be used from all creates that need a history file path)
- Adds a `nu_config_dir` function that returns the nushell configuration
directory.
- Updates existing code to rely on the above, effectively removing
duplicate uses of `"nushell"` and `NUSHELL_FOLDER` and assumptions about
file names associated with different history formats
# User-Facing Changes
None
# Description
Contributors to this projects will have a test failure if their `umask`
is not set to `0022`.
Apparently on Debian (at least on my install), it is set to `0002` which
makes my test fail. While `0022` is safer than the value I have, I want
to reduce the amount if issue new contributors could have.
I am making this test not assuming anything and instead, reading the
user umask.
# Related discussion
I see that the `umask` command implementation has been discussed in
#12256 . We could use this and enforce a umask for tests who rely on
this. I believe however (let me know what you think) that hard coded
values are harder to read in the test.
# User-Facing Changes
N/A
# Tests + Formatting
All green on my side after this MR 👍
# After Submitting
Documentation is not impacted
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Removes the `group` command that was deprecated back in 0.96.0 with
#13377.
# User-Facing Changes
Breaking change, removed `group` command.
# Description
This changes the names returned by CustomValue::name() of the various
custom value structs to just say the name of the thing they represent.
For instance "DataFrameCustomValue" is not just "DataFrame".
# User-Facing Changes
- Places such as or errors where NuDataFrameCustomValue would be seen,
now just shows as NuDataFrame.
# Description
This PR makes visual selection in Nushell a little bit more readable.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13431Fixes: #13578
The issue happened because nushell thinks external program name and
external arg with totally same rule. But actually they are a little bit
different.
When parsing external program name, backtick is a thing and it should be
keeped.
But when parsing external args, backtick is just a mark that it's a
**bareword which may contain space**. So in this context, it's already
useless.
# User-Facing Changes
After the pr, the following command will work as intended.
```nushell
> ^echo `"hello"`
hello
```
# Tests + Formatting
Added 3 test cases.
# Description
Fixes: #13425
Similar to `source-env`, `use` command should also remove `FILE_PWD` and
`CURRENT_FILE` after evaluating code block in the module file.
And user input can be a directory, in this case, we need to use the
return value of `find_in_dirs_env` carefully, so in case, I renamed
`maybe_file_path` to `maybe_file_path_or_dir` to emphasize it.
# User-Facing Changes
`$env.FILE_PWD` and `$env.CURRENT_FILE` will be more reliable to use.
# Tests + Formatting
Added 2 test cases.
# After Submitting
NaN
# Description
Uses "normal" module `std/<submodule>/mod.nu` instead of renaming the
files (as requested in #13842).
# User-Facing Changes
No user-facing changes other than in `view files` results. Imports
remain the same after this PR.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Also manually confirmed that it does not interfere with nupm, since we
did have a conflict at one point (and it's not possible to test here).
# Performance Tests
## Linux
### Nushell Startup - No config
```nu
bench --pretty -n 200 { <path_to>/nu -c "exit" }
```
| Release | Startup Time |
| --- | --- |
| 0.98.0 | 22ms 730µs 768ns +/- 1ms 515µs 942ns
| This commit | 9ms 312µs 68ns +/- 709µs 378ns
| Yesterday's nightly | 9ms 230µs 953ns +/- 9ms 67µs 689ns
### Nushell Startup - Load full standard library
Measures relative impact of a full `use std *`, which isn't recommended,
but worth tracking.
```nu
bench --pretty -n 200 { <path_to>/nu -c "use std *; exit" }
```
| Release | Startup Time |
| --- | --- |
| 0.98.0 | 23ms 10µs 636ns +/- 1ms 277µs 854ns
| This commit | 26ms 922µs 769ns +/- 562µs 538ns
| Yesterday's nightly | 28ms 133µs 95ns +/- 761µs 943ns
| `deprecated_dirs` removal PR * | 23ms 610µs 333ns +/- 369µs 436ns
\* Current increase is partially due to double-loading `dirs` with
removal warning in older version.
# After Submitting
Still TODO - Update standard library doc
# Description
This PR is from a [discussion in
Discord](https://discord.com/channels/601130461678272522/988303282931912704/1292900183742611466).
The gist is that `format date` didn't respect the $env.LC_TIME env var.
The reason for this is because it was using std::env::var which doesn't
understand nushell's env. Now, this should work.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes#12535
Implements sort-by functionality of #8322
Fixes sort-by part of #8667
This PR does two main things: add a new cell path and closure parameter
to `sort-by`, and attempt to make Nushell's sorting behavior
well-defined.
## `sort-by` features
The `columns` parameter is replaced with a `comparator` parameter, which
can be a cell path or a closure. Examples are from docs PR.
1. Cell paths
The basic interactive usage of `sort-by` is the same. For example, `ls |
sort-by modified` still works the same as before. It is not quite a
drop-in replacement, see [behavior changes](#behavior-changes).
Here's an example of how the cell path comparator might be useful:
```nu
> let cities = [
{name: 'New York', info: { established: 1624, population: 18_819_000 } }
{name: 'Kyoto', info: { established: 794, population: 37_468_000 } }
{name: 'São Paulo', info: { established: 1554, population: 21_650_000 }
}
]
> $cities | sort-by info.established
╭───┬───────────┬────────────────────────────╮
│ # │ name │ info │
├───┼───────────┼────────────────────────────┤
│ 0 │ Kyoto │ ╭─────────────┬──────────╮ │
│ │ │ │ established │ 794 │ │
│ │ │ │ population │ 37468000 │ │
│ │ │ ╰─────────────┴──────────╯ │
│ 1 │ São Paulo │ ╭─────────────┬──────────╮ │
│ │ │ │ established │ 1554 │ │
│ │ │ │ population │ 21650000 │ │
│ │ │ ╰─────────────┴──────────╯ │
│ 2 │ New York │ ╭─────────────┬──────────╮ │
│ │ │ │ established │ 1624 │ │
│ │ │ │ population │ 18819000 │ │
│ │ │ ╰─────────────┴──────────╯ │
╰───┴───────────┴────────────────────────────╯
```
2. Key closures
You can supply a closure which will transform each value into a sorting
key (without changing the underlying data). Here's an example of a key
closure, where we want to sort a list of assignments by their average
grade:
```nu
> let assignments = [
{name: 'Homework 1', grades: [97 89 86 92 89] }
{name: 'Homework 2', grades: [91 100 60 82 91] }
{name: 'Exam 1', grades: [78 88 78 53 90] }
{name: 'Project', grades: [92 81 82 84 83] }
]
> $assignments | sort-by { get grades | math avg }
╭───┬────────────┬───────────────────────╮
│ # │ name │ grades │
├───┼────────────┼───────────────────────┤
│ 0 │ Exam 1 │ [78, 88, 78, 53, 90] │
│ 1 │ Project │ [92, 81, 82, 84, 83] │
│ 2 │ Homework 2 │ [91, 100, 60, 82, 91] │
│ 3 │ Homework 1 │ [97, 89, 86, 92, 89] │
╰───┴────────────┴───────────────────────╯
```
3. Custom sort closure
The `--custom`, or `-c`, flag will tell `sort-by` to interpret closures
as custom sort closures. A custom sort closure has two parameters, and
returns a boolean. The closure should return `true` if the first
parameter comes _before_ the second parameter in the sort order.
For a simple example, we could rewrite a cell path sort as a custom sort
(see
[here](https://github.com/nushell/nushell.github.io/pull/1568/files#diff-a7a233e66a361d8665caf3887eb71d4288000001f401670c72b95cc23a948e86R231)
for a more complex example):
```nu
> ls | sort-by -c {|a, b| $a.size < $b.size }
╭───┬─────────────────────┬──────┬──────────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼─────────────────────┼──────┼──────────┼────────────────┤
│ 0 │ my-secret-plans.txt │ file │ 100 B │ 10 minutes ago │
│ 1 │ shopping_list.txt │ file │ 100 B │ 2 months ago │
│ 2 │ myscript.nu │ file │ 1.1 KiB │ 2 weeks ago │
│ 3 │ bigfile.img │ file │ 10.0 MiB │ 3 weeks ago │
╰───┴─────────────────────┴──────┴──────────┴────────────────╯
```
## Making sort more consistent
I think it's important for something as essential as `sort` to have
well-defined semantics. This PR contains some changes to try to make the
behavior of `sort` and `sort-by` consistent. In addition, after working
with the internals of sorting code, I have a much deeper understanding
of all of the edge cases. Here is my attempt to try to better define
some of the semantics of sorting (if you are just interested in changes,
skip to "User-Facing changes")
- `sort`, `sort -v`, and `sort-by` now all work the same. Each
individual sort implementation has been refactored into two functions in
`sort_utils.rs`: `sort`, and `sort_by`. These can also be used in other
parts of Nushell where values need to be sorted.
- `sort` and `sort-by` used to handle `-i` and `-n` differently.
- `sort -n` would consider all values which can't be coerced into a
string to be equal
- `sort-by -i` and `sort-by -n` would only work if all values were
strings
- In this PR, insensitive sort only affects comparison between strings,
and natural sort only applies to numbers and strings (see below).
- (not a change) Before and after this PR, `sort` and `sort-by` support
sorting mixed types. There was a lot of discussion about potentially
making `sort` and `sort-by` only work on lists of homogeneous types, but
the general consensus was that `sort` should not error just because its
input contains incompatible types.
- In order to try to make working with data containing `null` values
easier, I changed the PartialOrd order to sort `Nothing` values to the
end of a list, regardless of what other types the list contains. Before,
`null` would be sorted before `Binary`, `CellPath`, and `Custom` values.
- (not a change) When sorted, lists of mixed types will contain sorted
values of each type in order, for the most part
- (not a change) For example, `[0x[1] (date now) "a" ("yesterday" | into
datetime) "b" 0x[0]]` will be sorted as `["a", "b", a day ago, now, [0],
[1]]`, where sorted strings appear first, then sorted datetimes, etc.
- (not a change) The exception to this is `Int`s and `Float`s, which
will intermix, `Strings` and `Glob`s, which will intermix, and `None` as
described above. Additionally, natural sort will intermix strings with
ints and floats (see below).
- Natural sort no longer coerce all inputs to strings.
- I did originally make natural only apply to strings, but @fdncred
pointed out that the previous behavior also allowed you to sort numeric
strings with numbers. This seems like a useful feature if we are trying
to support sorting with mixed types, so I settled on coercing only
numbers (int, float). This can be reverted if people don't like it.
- Here is an example of this behavior in action, which is the same
before and after this PR:
```nushell
$ [1 "4" 3 "2"] | sort --natural
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
╰───┴───╯
```
# User-Facing Changes
## New features
- Replaces the `columns` string parameter of `sort-by` with a cell path
or a closure.
- The cell path parameter works exactly as you would expect
- By default, the `closure` parameter acts as a "key sort"; that is,
each element is transformed by the closure into a sorting key
- With the `--custom` (`-c`) parameter, you can define a comparison
function for completely custom sorting order.
## Behavior changes
<details>
<summary><code>sort -v</code> does not coerce record values to
strings</summary>
This was a bit of a surprising behavior, and is now unified with the
behavior of `sort` and `sort-by`. Here's an example where you can
observe the values being implicitly coerced into strings for sorting, as
they are sorted like strings rather than numbers:
Old behavior:
```nushell
$ {foo: 9 bar: 10} | sort -v
╭─────┬────╮
│ bar │ 10 │
│ foo │ 9 │
╰─────┴────╯
```
New behavior:
```nushell
$ {foo: 9 bar: 10} | sort -v
╭─────┬────╮
│ foo │ 9 │
│ bar │ 10 │
╰─────┴────╯
```
</details>
<details>
<summary>Changed <code>sort-by</code> parameters from
<code>string</code> to <code>cell-path</code> or <code>closure</code>.
Typical interactive usage is the same as before, but if passing a
variable to <code>sort-by</code> it must be a cell path (or closure),
not a string</summary>
Old behavior:
```nushell
$ let sort = "modified"
$ ls | sort-by $sort
╭───┬──────┬──────┬──────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼──────┼──────┼──────┼────────────────┤
│ 0 │ foo │ file │ 0 B │ 10 hours ago │
│ 1 │ bar │ file │ 0 B │ 35 seconds ago │
╰───┴──────┴──────┴──────┴────────────────╯
```
New behavior:
```nushell
$ let sort = "modified"
$ ls | sort-by $sort
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[entry #10:1:14]
1 │ ls | sort-by $sort
· ──┬──
· ╰── Cannot sort using a value which is not a cell path or closure
╰────
$ let sort = $."modified"
$ ls | sort-by $sort
╭───┬──────┬──────┬──────┬───────────────╮
│ # │ name │ type │ size │ modified │
├───┼──────┼──────┼──────┼───────────────┤
│ 0 │ foo │ file │ 0 B │ 10 hours ago │
│ 1 │ bar │ file │ 0 B │ 2 minutes ago │
╰───┴──────┴──────┴──────┴───────────────╯
```
</details>
<details>
<summary>Insensitve and natural sorting behavior reworked</summary>
Previously, the `-i` and `-n` worked differently for `sort` and
`sort-by` (see "Making sort more consistent"). Here are examples of how
these options result in different sorts now:
1. `sort -n`
- Old behavior (types other than numbers, strings, dates, and binary
sorted incorrectly)
```nushell
$ [2sec 1sec] | sort -n
╭───┬──────╮
│ 0 │ 2sec │
│ 1 │ 1sec │
╰───┴──────╯
```
- New behavior
```nushell
$ [2sec 1sec] | sort -n
╭───┬──────╮
│ 0 │ 1sec │
│ 1 │ 2sec │
╰───┴──────╯
```
2. `sort-by -i`
- Old behavior (uppercase words appear before lowercase words as they
would in a typical sort, indicating this is not actually an insensitive
sort)
```nushell
$ ["BAR" "bar" "foo" 2 "FOO" 1] | wrap a | sort-by -i a
╭───┬─────╮
│ # │ a │
├───┼─────┤
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ BAR │
│ 3 │ FOO │
│ 4 │ bar │
│ 5 │ foo │
╰───┴─────╯
```
- New behavior (strings are sorted stably, indicating this is an
insensitive sort)
```nushell
$ ["BAR" "bar" "foo" 2 "FOO" 1] | wrap a | sort-by -i a
╭───┬─────╮
│ # │ a │
├───┼─────┤
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ BAR │
│ 3 │ bar │
│ 4 │ foo │
│ 5 │ FOO │
╰───┴─────╯
```
3. `sort-by -n`
- Old behavior (natural sort does not work when data contains non-string
values)
```nushell
$ ["10" 8 "9"] | wrap a | sort-by -n a
╭───┬────╮
│ # │ a │
├───┼────┤
│ 0 │ 8 │
│ 1 │ 10 │
│ 2 │ 9 │
╰───┴────╯
```
- New behavior
```nushell
$ ["10" 8 "9"] | wrap a | sort-by -n a
╭───┬────╮
│ # │ a │
├───┼────┤
│ 0 │ 8 │
│ 1 │ 9 │
│ 2 │ 10 │
╰───┴────╯
```
</details>
<details>
<summary>
Sorting a list of non-record values with a non-existent column/path now
errors instead of sorting the values directly (<code>sort</code> should
be used for this, not <code>sort-by</code>)
</summary>
Old behavior:
```nushell
$ [2 1] | sort-by foo
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
╰───┴───╯
```
New behavior:
```nushell
$ [2 1] | sort-by foo
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #29:1:17]
1 │ [2 1] | sort-by foo
· ─┬─
· ╰── int doesn't support cell paths
╰────
```
</details>
<details>
<summary><code>sort</code> and <code>sort-by</code> output
<code>List</code> instead of <code>ListStream</code> </summary>
This isn't a meaningful change (unless I misunderstand the purpose of
ListStream), since `sort` and `sort-by` both need to collect in order to
do the sorting anyway, but is user observable.
Old behavior:
```nushell
$ ls | sort | describe -d
╭──────────┬───────────────────╮
│ type │ stream │
│ origin │ nushell │
│ subtype │ {record 3 fields} │
│ metadata │ {record 1 field} │
╰──────────┴───────────────────╯
```
```nushell
$ ls | sort-by name | describe -d
╭──────────┬───────────────────╮
│ type │ stream │
│ origin │ nushell │
│ subtype │ {record 3 fields} │
│ metadata │ {record 1 field} │
╰──────────┴───────────────────╯
```
New behavior:
```nushell
ls | sort | describe -d
╭────────┬─────────────────╮
│ type │ list │
│ length │ 22 │
│ values │ [table 22 rows] │
╰────────┴─────────────────╯
```
```nushell
$ ls | sort-by name | describe -d
╭────────┬─────────────────╮
│ type │ list │
│ length │ 22 │
│ values │ [table 22 rows] │
╰────────┴─────────────────╯
```
</details>
- `sort` now errors when nothing is piped in (`sort-by` already did
this)
# Tests + Formatting
I added lots of unit tests on the new sort implementation to enforce new
sort behaviors and prevent regressions.
# After Submitting
See [docs PR](https://github.com/nushell/nushell.github.io/pull/1568),
which is ~2/3 finished.
---------
Co-authored-by: NotTheDr01ds <32344964+NotTheDr01ds@users.noreply.github.com>
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
This is a follow-up of
https://github.com/nushell/nushell.github.io/pull/1584
The goal is to provide the user understanding of how to escape strings
# User-Facing Changes
Nothing except documentation
# Tests + Formatting
I don't know why but these two tests are failing on my system:
- `test_std_util path_add`
- `commands::umkdir::mkdir_umask_permission`
Since I hardly believe it is linked to my changes, I will let your CI
check it. Meanwhile, I will check my system, highly likely that it is
something something related to me recently switching shells, hacking my
way through prompts environments, etc.
# After Submitting
Will check how to re-generate the [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged
# Description
* Primary purpose is to fix an issue with a missing escaped opening
parenthesis in the warning message when running an old `dirs` alias.
This was creating an error condition from improper interpolation.
Also
* Incorporates #13842 feedback from @kubouch by renaming `std/lib` to
`std/util`
* Removes duplication of code in `export-env`
* Renames submodule exports to `std/<submodule>` rather than
`./<submodule>` - No user-facing change other than `view files` appears
"prettier".
* In #13842, I converted the test cases to use `use std/<module>`
syntax. Previously, the tests were (effectively) using `use std *` (due
to pre-existing bugs, now fixed).
So "before", we only had test coverage on `use std *`, and "after" we
only had test coverage on `use std/<module>`. I've started adding test
cases so that we have coverage on *both* scenarios going forward.
For now, `formats` and `util` have been updated with tests for both
scenarios. I'll continue adding the others in future PRs.
# User-Facing Changes
No user-facing changes - Bug fix, refactor, and test cases only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Still working on updating the Doc. I ran into the `dirs` issue while
writing it and rabbit-trailed to fix it in this PR.
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.5.0 to
2.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's
changelog</a>.</em></p>
<blockquote>
<h2>2.6.0 (2024-10-01)</h2>
<ul>
<li>Implemented <code>Clone</code> for <code>map::IntoIter</code> and
<code>set::IntoIter</code>.</li>
<li>Updated the <code>hashbrown</code> dependency to version 0.15.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="bf0362ba25"><code>bf0362b</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/354">#354</a>
from cuviper/release-2.6.0</li>
<li><a
href="bd0b4f7c8c"><code>bd0b4f7</code></a>
Add all release dates</li>
<li><a
href="53400496f4"><code>5340049</code></a>
Release 2.6.0</li>
<li><a
href="7f8022912a"><code>7f80229</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/343">#343</a>
from cuviper/hash_table</li>
<li><a
href="e577bf2556"><code>e577bf2</code></a>
Use <code>hashbrown::HashTable</code> instead of
<code>RawTable</code></li>
<li><a
href="09b48ec3b3"><code>09b48ec</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/353">#353</a>
from cuviper/move_index</li>
<li><a
href="267b83d701"><code>267b83d</code></a>
Add an explicit bounds check in <code>move_index</code></li>
<li><a
href="d74a4daffb"><code>d74a4da</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/349">#349</a>
from waywardmonkeys/improve-doc-formatting</li>
<li><a
href="5b0ed20b87"><code>5b0ed20</code></a>
docs: Improve doc formatting with backticks</li>
<li><a
href="15518f3152"><code>15518f3</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/348">#348</a>
from cuviper/clone-intoiter</li>
<li>Additional commits viewable in <a
href="https://github.com/indexmap-rs/indexmap/compare/2.5.0...2.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jack Wright <jack.wright@disqo.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add ls color highlighting for *.cjs and *.mjs files in line with regular
*.js files
Add an icon to *.cjs files in line with *.js and *.mjs files
# Description
This pull request enhances the `add_parsed_keybinding` function to
provide greater flexibility in specifying keycodes for keybindings in
Nushell. Previously, the function only supported specifying keycodes
directly through character notation (e.g., `char_e` for the character
`e`). This limited users to a small set of keybindings, especially in
scenarios where specific non-English characters were needed.
With this new version, users can also specify characters using their
Unicode codes, such as `char_u003B` for the semicolon (`;`), providing a
more flexible approach to customization, for example like this:
```nushell
{
name: move_to_line_end_or_take_history_hint
modifier: shift
keycode: char_u003B # char_;
mode: vi_normal
event: {
until: [
{ send: historyhintcomplete }
{ edit: movetolineend }
]
}
}
```
# User-Facing Changes
Added support for specifying keycodes using Unicode codes, e.g.,
char_u002C (comma - `,`):
```nushell
{
name: <command_name>, # name of the command
modifier: none, # key modifier
keycode: char_u002C, # Unicode code for the comma (',')
mode: vi_normal, # mode in which this binding should work
event: {
send: <action> # action to be performed
}
}
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Maybe we can deprecate `encode new-base64` and `decode new-base64`
first, to make the code clean and simple I'd rather remove the old
`encode base64` and `decode base64` and replace them with the `*
new-base64` commands.
Related PR: https://github.com/nushell/nushell/pull/13428
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- `encode new-base64` --> `encode base64`
- `decode new-base64` --> `decode base64`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
It's a breaking change
# Description
After a `use std *`, the environment variables exported from the
submodules' `export-env` blocks are not available because of #13403.
This causes failures in `log` (currently) and will cause issues in
`dirs` once we stop autoloading it separately.
When the submodules are loaded separately (e.g., `use std/log`),
everything already worked correctly. While this is the preferred way of
doing it, we also want `use std *` to work properly.
This is a workaround for the standard library submodules. It is
definitely not ideal, but it can be removed when and if #13403 is fixed.
For now, we need to duplicate any environment settings in both the
submodules (when loaded with `use std/log`) and in the standard library
itself (when loaded with `use std *`). Again, this should not be
necessary, but currently is because of #13403.
# User-Facing Changes
Bug fix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR adds another type of length to `str stats`, unicode-width.
```nushell
❯ "\u{ff03}" | str stats
╭───────────────┬───╮
│ lines │ 1 │
│ words │ 0 │
│ bytes │ 3 │
│ chars │ 1 │
│ graphemes │ 1 │
│ unicode-width │ 2 │
╰───────────────┴───╯
❯ "Amélie Amelie" | str stats
╭───────────────┬────╮
│ lines │ 1 │
│ words │ 2 │
│ bytes │ 15 │
│ chars │ 14 │
│ graphemes │ 13 │
│ unicode-width │ 13 │
╰───────────────┴────╯
❯ '今天天气真好' | str stats
╭───────────────┬────╮
│ lines │ 1 │
│ words │ 6 │
│ bytes │ 18 │
│ chars │ 6 │
│ graphemes │ 6 │
│ unicode-width │ 12 │
╰───────────────┴────╯
❯ "Μπορῶ νὰ φάω σπασμένα γυαλιὰ χωρὶς νὰ πάθω τίποτα." | str stats
╭───────────────┬────╮
│ lines │ 1 │
│ words │ 9 │
│ bytes │ 96 │
│ chars │ 50 │
│ graphemes │ 50 │
│ unicode-width │ 50 │
╰───────────────┴────╯
❯ "\n" | str stats
╭───────────────┬───╮
│ lines │ 1 │
│ words │ 0 │
│ bytes │ 1 │
│ chars │ 1 │
│ graphemes │ 1 │
│ unicode-width │ 0 │
╰───────────────┴───╯
```
The idea of this PR came from me wondering if we could replace `#` with
`\u{ff03}` in tables.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This pr does two optimization for the completer:
- Switch `sort_by` to `sort_unstable_by` on `sort_completions` function
since it reduces memory allocation and the orders of the identical
completions are not matter.
- Change `prefix` type from `Vec<u8>` to `&[u8]` to reduce cloning and
memory.
# Description
Fix example in documentation for hide-env
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
* Fixes missing closing parenthesis on `not-in` completion
Also tweaks the others to give them consistent capitalization and
punctuation:
* First word initial-case, other words lower-case
* Exception - Initial-case for "also known as" after slash or inside
parens
* No closing period for any completion help
* Word-smithing on others. E.g., "Mod" is technically "Remainder"
# User-Facing Changes
Operator completions
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
-
# After Submitting
N/A
# Description
Fxes https://github.com/nushell/nupm/issues/102
Not loading `std` at startup has caused an issue with nupm and std where
the `dirs` module name clashes and nupm won't load. This was technically
a preexisting bug that was previously masked. This could have been fixed
(and also should be) by changing the import statement in nupm, but the
potential for collision would remain in other (user) modules.
This PR explicitly sets the relative path for the import statements in
`std/mod.nu` so that there are no collisions.
# User-Facing Changes
Bugfix
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes#14000 by once again calling `set_current_dir()`, but doing so
with the `cwd` from the current state, rather than the (previously
removed) argument to `merge_env()`.
# User-Facing Changes
Bug fix
# Tests + Formatting
If this looks good, I'll look at adding a test case for it.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
VSCode OSC 633 needs particular string escaping to function properly. I
missed some escapes during my initial implementation. This PR should
cover the escapes I missed originally.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes a small side-issue in #10977 - If a command flag didn't have a
comment/description, it would still show an unnecessary separator at the
end of the line.
This fixes that, plus uses the `: ` (colon) to separate the flag from
the description. This aligns with the way that named parameters are
handled.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR addresses #13676 . It adds completions for the operators listed
on https://www.nushell.sh/lang-guide/chapters/operators.html#operators
based on the type of the value before the cursor. Currently, values
created as the output of other operations will not have completions. For
example `(1 + 3)` will not have completions. When operators are
added/removed/updated the completions will have to be adjusted manually.
# User-Facing Changes
- Tab completions for operators
# Tests
Added unit tests to the new completion struct OperationCompletion for
int completions, float completions, and str completions
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
fixes#13518
This pr escapes file/directory names, which start with a dollar sign
since it's being interpreted as a variable.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
@kubouch noticed that the warning message from #13842 when using a
"Shells" alias mentioned `config.nu`, but he's using it in the prompt
which means loading it in `env.nu`. Updated the warning message to:
> ... feature, and to remove this warning, please add the following
> to your startup configuration (typically env.nu or config.nu):
# User-Facing Changes
No change in functionality - More clear instructions, hopefully.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Doc and release notes still to be updated for #13842
Updates Ctrl+p to open the ide_completion menu and otherwise advance to
the "previous" menu item.
Ctrl+n opens the ide_completion_menu and subsequently advances to the
"next" menu item. Ctrl+p should share this behavior for the "previous"
menu item. See nushell/nushell#13946 for detailed discussion.
Tested by building and running nushell without a custom config, falling
back to this default config.
Hi there;
I do think it must be fixed.
I also did improve performance for a fraction in case of header on
border.
I want to believe :) I didn't bench it.
But we didn't cached the width in this code branch before.
Which was causing all data reestimation.
close#13966
cc: @fdncred
Original stated it filled on the left to a width of 5 while showing the
command and output to fill on both sides to a width of 10. Changed
wording of description to match effect of example and displayed result.
# Description
I mean't to do this small change the other day but forgot. We probably
shouldn't be using MAIN_SEPARATOR because **\\*.rs is an illegal glob.
So, update this to just use slash.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Updated summary for commit
[612e0e2](612e0e2160)
- While folks are welcome to read through the entire comments, the core
information is summarized here.
# Description
This PR drastically improves startup times of Nushell by only parsing a
single submodule of the Standard Library that provides the `banner` and
`pwd` commands. All other Standard Library commands and submodules are
parsed when imported by the user. This cuts startup times by more than
60%.
At the moment, we have stopped adding to `std-lib` because every
addition adds a small amount to the Nushell startup time.
With this change, we should once again be able to allow new
functionality to be added to the Standard Library without it impacting
`nu` startup times.
# User-Facing Changes
* Nushell now starts about 60% faster
* Breaking change: The `dirs` (Shells) aliases will return a warning
message that it will not be auto-loaded in the following release, along
with instructions on how to restore it (and disable the message)
* The `use std <submodule> *` syntax is available for convenience, but
should be avoided in scripts as it parses the entire `std` module and
all other submodules and places it in scope. The correct syntax to
*just* load a submodule is `use std/<submodule> *` (asterisk optional).
The slash is important. This will be documented.
* `use std *` can be used for convenience to load all of the library but
still incurs the full loading-time.
* `std/dirs`: Semi-breaking change. The `dirs` command replaces the
`show` command. This is more in line with the directory-stack
functionality found in other shells. Existing users will not be impacted
by this as the alias (`shells`) remains the same.
* Breaking-change: Technically a breaking change, but probably only
impacts maintainers of `std`. The virtual path for the standard library
has changed. It could previously be imported using its virtual path (and
technically, this would have been the correct way to do it):
```nu
use NU_STDLIB_VIRTUAL_DIR/std
```
The path is now simply `std/`:
```nu
use std
```
All submodules have moved accordingly.
# Timings
Comparisons below were made:
* In a temporary, clean config directory using `$env.XDG_CONFIG_HOME =
(mktemp -d)`.
* `nu` was run with a release build
* `nu` was run one time to generate the default `config.nu` (etc.) files
- Otherwise timings would include the user-prompt
* The shell was exited and then restarted several times to get timing
samples
(Note: Old timings based on 0.97 rather than 0.98, but in the range of
being accurate)
| Scenario | `$nu.startup-time` |
| --- | --- |
| 0.97.2
([aaaab8e](aaaab8e070))
Without this PR | 23ms - 24ms |
| This PR with deprecated commands | 9ms - <11ms |
| This PR after deprecated commands are removed in following release |
8ms - <10ms |
| Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms |
| Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms
|
| Final PR (remove deprecated), using `--no-config-file --no-std-lib` |
1ms - 1.5ms |
*These last two timings point to the opportunity for further
optimization (see comment in thread below (will link once I write it).*
# Implementation details for future maintenance
* `use std banner` is a ridiculously deceptive call. That call parses
and imports *all* of `std` into scope. Simply replacing it with `use
std/core *` is essentially what saves ~14-15ms. This *only* imports the
submodule with the `banner` and `pwd` commands.
* From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was
used as a prefix was so that there wouldn't be an issue if a user had a
`./std/mod.nu` in the current directory. This does **not** appear to be
an issue. After removing the prefix, I tested with both a relative
module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases
the *internal* `std` still took precedence.
* By removing the prefix, users can now `use std` (and variants) without
requiring that it already be parsed and in scope.
* In the next release, we'll stop autoloading the `dirs` (shells)
functionality. While this only costs an additional 1-1.5ms, I think it's
better moved to the `config.nu` where the user can optionally remove it.
The main reason is its use of aliases (which have also caused issues) -
The `n`, `p`, and `g` short-commands are valuable real-estate, and users
may want to map these to something else.
For this release, there's an `deprecated_dirs` module that is still
autoloaded. As with the top-level commands, use of these will give a
deprecation warning with instructions on how to handle going forward.
To help with this, moved the aliases to their own submodule inside the
`dirs` module.
* Also sneaks in a small change where the top-level `dirs` command is
now the replacement for `dirs show`
* Fixed a double-import of `assert` in `dirs.nu`
* The `show_banner` step is replaced with simply `banner` rather than
re-importing it.
* A `virtual_path` may now be referenced with either a forward-slash or
a backward-slash on Windows. This allows `use std/<submodule>` to work
on all platforms.
# Performance side-notes:
* Future parsing and/or IR improvements should improve performance even
further.
* While the existing load time penalty of `std-lib` was not noticeable
on many systems, Nushell runs on a wide-variety of hardware and OS
platforms. Slower platforms will naturally see a bigger jump in
performance here. For users starting multiple Nushell sessions
frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended
to keep total startup time (including user configuration) under ~250ms.
# Tests + Formatting
* All tests are green
* Updated tests:
- Removed the test that confirmed that `std` was loaded (since we
don't).
- Removed the `shells` test since it is not autoloaded. Main `dirs.nu`
functionality is tested through `stdlib-test`.
- Many tests assumed that the library was fully loaded, because it was
(even though we didn't intend for it to be). Fixed those tests.
- Tests now import only the necessary submodules (e.g., `use
std/assert`, rather than `use std assert`)
- Some tests *thought* they were loading `std/log`, but were doing so
improperly. This was masked by the now-fixed "load-everything-into-scope
bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being
inherited from the calling process, but would fail in the "clean" GitHub
CI environment. These tests have also been fixed.
* Added additional tests for the changes
# After Submitting
Will update the Standard Library doc page
# Description
Title says it all, changes `EngineState::get_env_var` to return a
`Option<&'a Value>` instead of an owned `Option<Value>`. This avoids
some unnecessary clones.
I also made a similar change to the `PluginExecutionContext` trait.
# Description
Fixes#13949 where `$env.LAST_EXIT_CODE` was not being set for internal
errors.
# Tests + Formatting
Cannot test due to limitations with the `nu_repl` test bin.
# Description
This fixes an issue with converting to a dataframe when specifying a
struct in the schema. Things like the following now work correctly:
```nushell
[[foo bar]; [{a: "a_0", b:"b_0"} 1] [{a: "a_1", b: "b_1" } 2]] | polars into-df -s {foo: {a: str, b: str}, bar: u8}
```
# Description
As with #13985, credit to @AlifianK for suggesting this in
https://github.com/nushell/nushell.github.io/pull/1572
Updates the example in `wrap` to not use 1-based, sequential numbers.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
All credit to @AlifianK for suggesting this in the doc repo
(https://github.com/nushell/nushell.github.io/pull/1571).
This updates the merge example to make it more clear by using a
different set of numbers that can't easily be confused with an `index`.
Also changes the `index` to `id` to remove the "magic column name
conversion". (#13780).
# User-Facing Changes
Help/Doc change only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
