Goes towards implementing #10598, which asks for a spread operator in
lists, in records, and when calling commands (continuation of #11006,
which only implements it in lists)
# Description
This PR is for adding a spread operator that can be used when building
records. Additional functionality can be added later.
Changes:
- Previously, the `Expr::Record` variant held `(Expression, Expression)`
pairs. It now holds instances of an enum `RecordItem` (the name isn't
amazing) that allows either a key-value mapping or a spread operator.
- `...` will be treated as the spread operator when it appears before
`$`, `{`, or `(` inside records (no whitespace allowed in between) (not
implemented yet)
- The error message for duplicate columns now includes the column name
itself, because if two spread records are involved in such an error, you
can't tell which field was duplicated from the spans alone
`...` will still be treated as a normal string outside records, and even
in records, it is not treated as a spread operator when not followed
immediately by a `$`, `{`, or `(`.
# User-Facing Changes
Users will be able to use `...` when building records.
```
> let rec = { x: 1, ...{ a: 2 } }
> $rec
╭───┬───╮
│ x │ 1 │
│ a │ 2 │
╰───┴───╯
> { foo: bar, ...$rec, baz: blah }
╭─────┬──────╮
│ foo │ bar │
│ x │ 1 │
│ a │ 2 │
│ baz │ blah │
╰─────┴──────╯
```
If you want to update a field of a record, you'll have to use `merge`
instead:
```
> { ...$rec, x: 5 }
Error: nu:🐚:column_defined_twice
× Record field or table column used twice: x
╭─[entry #2:1:1]
1 │ { ...$rec, x: 5 }
· ──┬─ ┬
· │ ╰── field redefined here
· ╰── field first defined here
╰────
> $rec | merge { x: 5 }
╭───┬───╮
│ x │ 5 │
│ a │ 2 │
╰───┴───╯
```
# Tests + Formatting
# After Submitting
Works for all arguments and flags. Because the signature parsing doesn't
give the spans, it is flags the entire signature.
Also added a constant with reserved variable names.
Fix#11158.
Reverts nushell/nushell#10943
The current implementation of `arr_to_value` is unsound, as it allows
casts of arbitrary data to arbitrary types without being marked
`unsafe`.
The full safety requirements to perform both the cast and the following
unchecked access are not as clear that a simple change of `fn
arr_to_value` to `unsafe fn arr_to_value` could be blessed without
further investigation.
cc @ayax79
# Description
Convert these ShellError variants to named fields:
* CreateNotPossible
* MoveNotPossibleSingle
* DirectoryNotFoundCustom
* DirectoryNotFound
* NotADirectory
* OutOfMemoryError
* PermissionDeniedError
* IOErrorSpanned
* IOError
* IOInterrupted
Also place the `span` field of `DirectoryNotFound` last to match other
errors.
Part of #10700 (almost half done!)
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
We have seen some test cases which requires to output message to both
stdout and stderr, especially in redirection scenario.
This pr is going to introduce a new echo_env_mixed testbin, so we can
have less tests which only runs on windows.
# User-Facing Changes
NaN
# Tests + Formatting
NaN
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This PR preserves metadata when running some filters. As discussed on
discord that helps when running for example `ls | reject modified`
because it keeps colouring and links.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Close: #10278
This pr introduces `o>>`, `e>>`, `o+e>>` to allow redirection to append
to a file.
Examples:
```nushell
echo abc o>> a.txt
echo abc o>> a.txt
cat asdf e>> a.txt
cat asdf e>> a.txt
cat asdf o+e>> a.txt
```
~~TODO:~~
~~1. currently internal commands with `o+e>` redirect to a variable is
broken: `let x = "a.txt"; echo abc o+e> $x`, not sure when it was
introduced...~~
~~2. redirect stdout and stderr with append mode doesn't supported yet:
`cat asdf o>>a.txt e>>b.ext`~~
~~For these 2 items, I'd like to fix them in different prs.~~
Already done in this pr
# Description
This PR addresses issue with cp brough up on
[discord](https://discord.com/channels/601130461678272522/614593951969574961/1177669443917189130)
where target of cp is not correctly expanded.
If one has directory `test` with file `file.txt` in it then the
following command (in one line or inside a `do` block):
```nu
cd test; let file = 'copy.txt'; cp file.txt $file
```
will create a `copy.txt` in `.` not in `test` instead. This happens
because target of `cp` is a variable which is not expanded unlike a
string literal
# User-Facing Changes
`cp` will correctly parse realative target paths
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR enables a new feature that shows which externals are found in
your path via the syntax highlighter as you type.
This idea could use some improvement where it caches the items in your
path and on some trigger, expires that cache and creates a new on. Right
now, all it does is call the `which` crate on every character you type.
This could be problematic if you have hundreds of paths in your PATH or
if some of your paths in your Path point to extraordinarily slow file
systems. WSL pointing to Windows comes to mind. Either way, I've thrown
it up here for people to try and provide feedback. I think the novelty
of showing what is valid and what isn't is pretty cool. I believe
fish-shell also does this, IIRC.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Added statement catching early List passed to CSV and printing more
helpful error message. This fixes#10081. Similar message might be
useful for other from_* calls but I'm not sure if there aren't any
converters accepting List as input.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fix release and nightly build workflow:
https://github.com/nushell/nightly/issues/15
I think the `mv` command in v0.87.1 still has some bugs, when downgrade
to v0.86 everything works as expected
# Description
Fixes: #10271
Given the following script:
```shell
# test.sh
echo aaaaa
echo bbbbb 1>&2
echo cc
```
This pr makes the following command possible:
```nushell
bash test.sh err> /dev/null | lines | each {|line| $line | str length}
```
## General idea behind the change:
When nushell redirect stderr message to external file
1. it take stdout of external stream, and pass this stream to next
command, so it won't block next pipeline command from running.
2. relative stderr stream are handled by `save` command
These two streams are handled separately, so we need to delegate a
thread to `save` command, or else we'll have a chance to hang nushell,
we have meet a similar before: #5625.
### One case to consider
What if we're failed to save to an external stream? (Like we don't have
a permission to save to a file)?
In this case nushell will just print a waning message, and don't stop
the following scripts from running.
# User-Facing Changes
## Before
```nushell
❯ bash test2.sh err> /dev/null | lines | each {|line| $line | str length}
aaaaa
cc
```
## After
```nushell
❯ bash test2.sh err> /dev/null | lines | each {|line| $line | str length}
╭───┬───╮
│ 0 │ 5 │
│ 1 │ 2 │
╰───┴───╯
```
BTY, after this pr, the following commands are impossible either, it's
important to make sure that the implementation doesn't introduce too
much costs:
```nushell
❯ echo a e> a.txt e> a.txt
Error: × Can't make stderr redirection twice
╭─[entry #1:1:1]
1 │ echo a e> a.txt e> a.txt
· ─┬
· ╰── try to remove one
╰────
❯ echo a o> a.txt o> a.txt
Error: × Can't make stdout redirection twice
╭─[entry #2:1:1]
1 │ echo a o> a.txt o> a.txt
· ─┬
· ╰── try to remove one
╰────
```
# Description
Closes: #7260
About the change:
When we make an internalcall, and meet a `switch` (Flag.arg is None),
nushell will try to see if the switch is called like `--xyz=false` , if
that is true, `parse_long_flag` will return relative value.
# User-Facing Changes
So after the pr, the following would be possible:
```nushell
def build-imp [--push, --release] {
echo $"Doing a build with push: ($push) and release: ($release)"
}
def build [--push, --release] {
build-imp --push=$push --release=$release
}
build --push --release=false
build --push=false --release=true
build --push=false --release=false
build --push --release
build
```
# Tests + Formatting
Done
# After Submitting
Needs to submit a doc update, mentioned about the difference between
`def a [--x] {}` and `def a [--x: bool] {}`
# Description
Further work towards the goal that we can make `Record`'s field private
and experiment with different internal representations
## Details
- Use inplace record iter in `nu-command/math/utils`
- Guarantee that existing allocation can be reused
- Use proper record iterators in `path join`
- Remove unnecesary hashmap in `path join`
- Should minimally reduce the overhead
- Unzip records in `nu-command`
- Refactor `query web` plugin to use record APIs
- Use `Record::into_values` for `values` command
- Use `Record::columns()` in `join` instead.
- Potential minor pessimisation
- Not the hot value path
- Use sane `Record` iters in example `Debug` impl
- Avoid layout assumption in `nu-cmd-extra/roll/mod`
- Potential minor pessimisation
- relegated to `extra`, changing the representation may otherwise break
this op.
- Use record api in `rotate`
- Minor risk that this surfaces some existing invalid behavior as panics
as we now validate column/value lengths
- `extra` so things are unstable
- Remove unnecessary references in `rotate`
- Bonus cleanup
# User-Facing Changes
None functional, minor potential differences in runtime. You win some,
you lose some.
# Tests + Formatting
Relying on existing tests
# Description
I'm not sure if "is-terminal" is the best name for this command as there
is also "term size". Uses
[`is_terminal()`](https://doc.rust-lang.org/stable/std/io/trait.IsTerminal.html#tymethod.is_terminal)
which is cross-platform.
Possible alternative names:
* `term is-tty --stdout`
* `term is-tty stdout`
* `term is-terminal stdout`
If multiple streams are provided an error is returned. The error span
covers all arguments as the incompatible one is not known. This may be
new?
Fixes#10517
# User-Facing Changes
* Add `is-terminal` to check if stdin, stdout, or stderr are a terminal
(TTY)
# Tests + Formatting
The nu tests always redirect stdin, stdout, and stderr so a positive
test case is not possible without extra work
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
The new command will be added automatically
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
This is still work in progress. But let's start somewhere.
Goal for this being in the repo is to make sure we update it more
frequently than the
https://github.com/nushell/nushell.github.io/tree/main/contributor-book
- Add folder for in-repo developer documentation
- Move PLATFORM_SUPPORT into devdocs
- Move our rust style to devdocs
- Use nushell code formatting in CONTRIBUTING
- Add FAQ file for developers with example questions
- Describe error handling best practices
# Description
`ShellError::FlagNotFound` had a note that said it may be removable so
this PR removes it instead of updating it to named fields per #10700
I can't see this error being used since it was introduced with #4364. I
can't find why or where it was used before that date, though. There was
a large merge with that PR but I can't penetrate the secrets of git to
find out where its earlier history went.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Fix the breaking changes.
Get's rid of some outdated transitive dependencies.
Sadly we need to expose more of `procfs` to `nu-command` based on how
the features of `nu-system` are exposed right now.
Conditional compilation/dependencies from hell included
Supersedes #11101
# Description
Slightly refactors the cell path functions (`insert_data_at_cell_path`,
etc.) for `Value` to fix a few bugs and ensure consistent behavior.
Namely, case (in)sensitivity now applies to lazy records just like it
does for regular `Records`. Also, the insert behavior of `insert` and
`upsert` now match, alongside fixing a few related bugs described below.
Otherwise, a few places were changed to use the `Record` API.
# Tests
Added tests for two bugs:
- `{a: {}} | insert a.b.c 0`: before this PR, doesn't create the
innermost record `c`.
- `{table: [[col]; [{a: 1}], [{a: 1}]]} | insert table.col.b 2`: before
this PR, doesn't add the field `b: 2` to each row.
# Description
These make it easy to make a Span that covers an entire argument and the
span of all arguments in a Call.
Call::arguments_span() is useful for errors where a command may accept
arguments or the pipeline, but not both.
Argument::span() is useful for errors where an arguments is incompatible
with one or more other arguments.
In particular, I wish to use this to create an error for an
implementation of #9563 that either allows arguments to set limits:
```nushell
limits set RLIMIT_NOFILE --soft 255 --hard 1024
```
Or pipeline:
```nushell
{name: RLIMIT_NOFILE, soft: 255} | limits set
```
But not both:
```
❯ [{name: RLIMIT_NOFILE, soft: 255, hard: 1024}] | limits set AS --soft 5 --hard 5
Error: nu:🐚:incompatible_parameters
× Incompatible parameters.
╭─[source:1:1]
1 │ [{name: RLIMIT_NOFILE, soft: 255, hard: 1024}] | limits set AS --soft 5 --hard 5
· ───────────────────────┬────────────────────── ──────────┬─────────
· │ ╰── or arguments, not both
· ╰── Supply either pipeline
╰────
```
# User-Facing Changes
Only nushell Command API changes
follow-up to
- https://github.com/nushell/nushell/pull/10715
> **Important**
> wait for between 0.87 and 0.88 to land this
# Description
it's time for removal again 😋
this PR removes `def-env` and `export def-env` in favor of `def --env`
# User-Facing Changes
`def-env` and `export def-env` will not be found anymore.
# Tests + Formatting
# After Submitting
closes#10845
I've opened this a little prematurely to get some questions answered
before I cleanup the code.
As I started trying to better understand GNUs `mktemp` I've realized its
kind of peculiar and we might want to change its behavior to introduce
it to nushell.
#### quiet and dry run
Does it make sense to keep the `quiet` and `dry_run` flags? I don't
think so. The GNU documentation says this about the dry run flag "Using
the output of this command to create a new file is inherently unsafe, as
there is a window of time between generating the name and using it where
another process can create an object by the same name." So yeah why keep
it? As far as quiet goes, does it make sense to silence the errors in
nushell?
#### other confusing flags
According to the [gnu
docs](https://www.gnu.org/software/coreutils/manual/html_node/mktemp-invocation.html),
the `-t` flag is deprecated and the `-p`/ `--tempdir` are the same flag
with the only difference being `--tempdir` takes an optional path, Given
that, I've broken the `-p` away from `--tempdir`. Now there is one
switch `--tmpdir`/`-t` and one named param `--tmpdir-path`/`-p`.
GNU mktemp
```
-p DIR, --tmpdir[=DIR] interpret TEMPLATE relative to DIR; if DIR is not
specified, use $TMPDIR if set, else /tmp. With
this option, TEMPLATE must not be an absolute name;
unlike with -t, TEMPLATE may contain slashes, but
mktemp creates only the final component
-t interpret TEMPLATE as a single file name component,
relative to a directory: $TMPDIR, if set; else the
directory specified via -p; else /tmp [deprecated]
```
to
nushell mktemp
```
-p, --tmpdir-path <Filepath> # named param, must provide a path
-t, --tmpdir # a switch
```
Is this a terrible idea?
What should I do?
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Clippy fixes for rust 1.76.0-nightly
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes issue #11061 where `rm` fails to find a file after a `cd`. It
looks like the new glob functions do not return absolute file paths
which we forgot to account for.
# Tests
Added a test (fails on current main, but passes with this PR).
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
