mirror of
https://github.com/nushell/nushell.git
synced 2024-11-07 09:04:18 +01:00
c7e128eed1
895 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
dependabot[bot]
|
4907575d3d
|
Bump chrono-tz from 0.8.6 to 0.10.0 (#14205)
Bumps [chrono-tz](https://github.com/chronotope/chrono-tz) from 0.8.6 to 0.10.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/chronotope/chrono-tz/releases">chrono-tz's releases</a>.</em></p> <blockquote> <h2>chrono-tz v0.10.0: 2024b</h2> <p><strong>TZDB</strong> version 2024b (2024-09-05).</p> <h2>Changes</h2> <ul> <li>Make <code>OffsetName::abbreviation</code> return an <code>Option</code>. This reflects that numeric values such as <code>+11</code> are no longer encoded in the upstream TZDB as abbreviations (<a href="https://redirect.github.com/chronotope/chrono-tz/issues/185">#185</a>).</li> </ul> <h2>TZDB 2024b</h2> <blockquote> <p>The 2024b release of the tz code and data is available.</p> <p>This release is prompted by the accumulated weight of many non-urgent changes to both code and data. It changes one timestamp abbreviation, for the long-obsolete System V setting TZ='MET'; see below. Otherwise, the timestamps affected by this release all predate April 2008, so you can skip this release if your application uses only tzdata and does not use older timestamps.</p> <p>This release contains the following changes:</p> <h3>Briefly:</h3> <p>Improve historical data for Mexico, Mongolia, and Portugal. System V names are now obsolescent. The main data form now uses %z. The code now conforms to RFC 8536 for early timestamps. Support POSIX.1-2024, which removes asctime_r and ctime_r. Assume POSIX.2-1992 or later for shell scripts. SUPPORT_C89 now defaults to 1.</p> <h3>Changes to past timestamps</h3> <p>Asia/Choibalsan is now an alias for Asia/Ulaanbaatar rather than being a separate Zone with differing behavior before April 2008. This seems better given our wildly conflicting information about Mongolia's time zone history. (Thanks to Heitor David Pinto.)</p> <p>Historical transitions for Mexico have been updated based on official Mexican decrees. The affected timestamps occur during the years 1921-1927, 1931, 1945, 1949-1970, and 1981-1997. The affected zones are America/Bahia_Banderas, America/Cancun, America/Chihuahua, America/Ciudad_Juarez, America/Hermosillo, America/Mazatlan, America/Merida, America/Mexico_City, America/Monterrey, America/Ojinaga, and America/Tijuana. (Thanks to Heitor David Pinto.)</p> <p>Historical transitions for Portugal, represented by Europe/Lisbon, Atlantic/Azores, and Atlantic/Madeira, have been updated based on a close reading of old Portuguese legislation, replacing previous data mainly originating from Whitman and Shanks & Pottenger. These changes affect a few transitions in 1917-1921, 1924, and 1940 throughout these regions by a few hours or days, and various timestamps between 1977 and 1993 depending on the region. In particular, the Azores and Madeira did not observe DST from 1977 to 1981. Additionally, the adoption of standard zonal time in former Portuguese colonies have been adjusted: Africa/Maputo in 1909, and Asia/Dili by 22 minutes at the start of 1912. (Thanks to Tim Parenti.)</p> <h3>Changes to past tm_isdst flags</h3> <p>The period from 1966-04-03 through 1966-10-02 in Portugal is now modeled as DST, to more closely reflect how contemporaneous changes in law entered into force.</p> <h3>Changes to data</h3> <p>Names present only for compatibility with UNIX System V (last released in the 1990s) have been moved to 'backward'. These names, which for post-1970 timestamps mostly just duplicate data of geographical names, were confusing downstream uses. Names moved to 'backward' are now links to geographical names. This affects behavior for TZ='EET' for some pre-1981 timestamps, for TZ='CET' for some pre-1947 timestamps, and for TZ='WET' for some pre-1996 timestamps. Also, TZ='MET' now behaves like TZ='CET' and so uses the abbreviation "CET" rather than "MET". Those needing the previous TZDB behavior, which does not match any real-world clocks, can find the old entries in 'backzone'. (Problem reported by Justin Grant.)</p> <p>The main source files' time zone abbreviations now use %z, supported by zic since release 2015f and used in vanguard form since release 2022b. For example, America/Sao_Paulo now contains the zone continuation line "-3:00 Brazil %z", which is less error prone than the old "-3:00 Brazil -03/-02". This does not change the represented data: the generated TZif files are unchanged. Rearguard form still avoids %z, to support obsolescent parsers.</p> <p>Asia/Almaty has been removed from zonenow.tab as it now agrees with Asia/Tashkent for future timestamps, due to Kazakhstan's 2024-02-29 time zone change. Similarly, America/Scoresbysund has been removed, as it now agrees with America/Nuuk due to its 2024-03-31 time zone change.</p> </blockquote> <h2>chrono-tz v0.9.0: 2024a</h2> <p><strong>TZDB</strong> version <a href="https://mm.icann.org/pipermail/tz-announce/2024-February/000081.html">2024a</a> (2024-02-01).</p> <h2>Changes</h2> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
a6c2c685bc
|
Bump trash from 5.1.1 to 5.2.0 (#14206)
Bumps [trash](https://github.com/ArturKovacs/trash) from 5.1.1 to 5.2.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/ArturKovacs/trash/releases">trash's releases</a>.</em></p> <blockquote> <h2>v5.2.0</h2> <h3>New Features</h3> <ul> <li> <p>Short circuiting check for empty trash <code>is_empty()</code> is a short circuiting function that checks if the trash is empty on Freedesktop compatible systems and Windows.</p> <p>The main purpose of <code>is_empty()</code> is to avoid evaluating the entire trash context when the caller is only interested in whether the trash is empty or not. This is especially useful for full trashes with many items.</p> </li> </ul> <h3>Commit Statistics</h3> <ul> <li>2 commits contributed to the release.</li> <li>56 days passed between releases.</li> <li>1 commit was understood as <a href="https://www.conventionalcommits.org">conventional</a>.</li> <li>0 issues like '(#ID)' were seen in commit messages</li> </ul> <h3>Commit Details</h3> <!-- raw HTML omitted --> <!-- raw HTML omitted --> <ul> <li><strong>Uncategorized</strong> <ul> <li>Merge pull request <a href="https://redirect.github.com/ArturKovacs/trash/issues/120">#120</a> from joshuamegnauth54/feat-short-circuiting-is-empty (0120bbe)</li> <li>Short circuiting check for empty trash (6d59fa9)</li> </ul> </li> </ul> <!-- raw HTML omitted --> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/Byron/trash-rs/blob/master/CHANGELOG.md">trash's changelog</a>.</em></p> <blockquote> <h2>5.2.0 (2024-10-26)</h2> <h3>New Features</h3> <ul> <li> <p><!-- raw HTML omitted --> Short circuiting check for empty trash <code>is_empty()</code> is a short circuiting function that checks if the trash is empty on Freedesktop compatible systems and Windows.</p> <p>The main purpose of <code>is_empty()</code> is to avoid evaluating the entire trash context when the caller is only interested in whether the trash is empty or not. This is especially useful for full trashes with many items.</p> </li> </ul> <h3>Commit Statistics</h3> <!-- raw HTML omitted --> <ul> <li>2 commits contributed to the release.</li> <li>56 days passed between releases.</li> <li>1 commit was understood as <a href="https://www.conventionalcommits.org">conventional</a>.</li> <li>0 issues like '(#ID)' were seen in commit messages</li> </ul> <h3>Commit Details</h3> <!-- raw HTML omitted --> <!-- raw HTML omitted --> <ul> <li><strong>Uncategorized</strong> <ul> <li>Merge pull request <a href="https://redirect.github.com/ArturKovacs/trash/issues/120">#120</a> from joshuamegnauth54/feat-short-circuiting-is-empty (<a href=" |
||
|
dependabot[bot]
|
1e2fa68db0
|
Bump fancy-regex from 0.13.0 to 0.14.0 (#14207)
Bumps [fancy-regex](https://github.com/fancy-regex/fancy-regex) from 0.13.0 to 0.14.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/fancy-regex/fancy-regex/releases">fancy-regex's releases</a>.</em></p> <blockquote> <h2>0.14.0</h2> <h3>Added</h3> <ul> <li>Add <code>split</code>, <code>splitn</code> methods to <code>Regex</code> to split a string into substrings (<a href="https://redirect.github.com/fancy-regex/fancy-regex/issues/140">#140</a>)</li> <li>Add <code>case_insensitive</code> method to <code>RegexBuilder</code> to force case-insensitive mode (<a href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>)</li> </ul> <h3>Changed</h3> <ul> <li>Bump bit-set dependency to 0.8 (<a href="https://redirect.github.com/fancy-regex/fancy-regex/issues/139">#139</a>)</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/fancy-regex/fancy-regex/blob/main/CHANGELOG.md">fancy-regex's changelog</a>.</em></p> <blockquote> <h2>[0.14.0] - 2024-10-24</h2> <h3>Added</h3> <ul> <li>Add <code>split</code>, <code>splitn</code> methods to <code>Regex</code> to split a string into substrings (<a href="https://redirect.github.com/fancy-regex/fancy-regex/issues/140">#140</a>)</li> <li>Add <code>case_insensitive</code> method to <code>RegexBuilder</code> to force case-insensitive mode (<a href="https://redirect.github.com/fancy-regex/fancy-regex/issues/132">#132</a>)</li> </ul> <h3>Changed</h3> <ul> <li>Bump bit-set dependency to 0.8 (<a href="https://redirect.github.com/fancy-regex/fancy-regex/issues/139">#139</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
Alex Ionescu
|
e104bccfb9
|
Drop once_cell dependency (#14198)
This PR drops the `once_cell` dependency from all Nu crates, replacing uses of the [`Lazy`](https://docs.rs/once_cell/latest/once_cell/sync/struct.Lazy.html) type with its `std` equivalent, [`LazyLock`](https://doc.rust-lang.org/std/sync/struct.LazyLock.html). |
||
zc he
|
6cdc9e3b77
|
Fix LSP non-ascii characters offset issues. (#14002)
<!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> This PR is supposed to fix #13582, #11522, as well as related goto definition/reference issues (wrong position if non ascii characters ahead). # Description <!-- Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes. Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience. --> <img width="411" alt="image" src="https://github.com/user-attachments/assets/9a81953c-81b2-490d-a842-14ccaefd6972"> Changes: 1. span/completion should use byte offset instead of character index 2. lsp Postions related ops in Ropey remain to use character index # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> Should be none, tested in neovim with config: ```lua require("lspconfig").nushell.setup({ cmd = { "nu", "-I", vim.fn.getcwd(), "--no-config-file", "--lsp", }, filetypes = { "nu" }, }) ``` # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> tests::complete_command_with_utf_line parameters fixed to align with true lsp requests (in character index, not byte). As for the issue_11522.nu, manually tested: <img width="520" alt="image" src="https://github.com/user-attachments/assets/45496ba8-5a2d-4998-9190-d7bde31ee72c"> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
Darren Schroeder
|
88b0982dac
|
allow oem code pages to be used to decode text (#14187)
# Description This PR allows oem code pages to be used in decoding by specifying the code page number. ## Before  ## After (umlauts)  closes https://github.com/nushell/nushell/issues/14168 I abstracted the decoding a bit. Here are my function comments on how/why. ```rust // Since we have two different decoding mechanisms, we allow oem_cp to be // specified by only a number like `open file | decode 850`. If this decode // parameter parses as a usize then we assume it was intentional and use oem_cp // crate. Otherwise, if it doesn't parse as a usize, we assume it was a string // and use the encoding_rs crate to try and decode it. ``` # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
Stefan Holderbach
|
619211c1bf
|
Bump brotli to 6.0.0 (#14161)
This deduplicates our dependency on `brotli` |
||
|
dependabot[bot]
|
e7c4597ad0
|
Bump uuid from 1.10.0 to 1.11.0 (#14155)
Bumps [uuid](https://github.com/uuid-rs/uuid) from 1.10.0 to 1.11.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/uuid-rs/uuid/releases">uuid's releases</a>.</em></p> <blockquote> <h2>1.11.0</h2> <h2>What's Changed</h2> <ul> <li>Upgrade zerocopy to 0.8 by <a href="https://github.com/yotamofek"><code>@yotamofek</code></a> in <a href="https://redirect.github.com/uuid-rs/uuid/pull/771">uuid-rs/uuid#771</a></li> <li>Prepare for 1.11.0 release by <a href="https://github.com/KodrAus"><code>@KodrAus</code></a> in <a href="https://redirect.github.com/uuid-rs/uuid/pull/772">uuid-rs/uuid#772</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/yotamofek"><code>@yotamofek</code></a> made their first contribution in <a href="https://redirect.github.com/uuid-rs/uuid/pull/771">uuid-rs/uuid#771</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0">https://github.com/uuid-rs/uuid/compare/1.10.0...1.11.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Darren Schroeder
|
e05f387632
|
update to reedline commit 9cb1128 (#14146)
# Description Update to the latest reedline commit. # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
YizhePKU
|
740fe942c1 |
Reduce duplicate dependencies on the windows crate (#14105)
Nushell currently depends on three different versions of the `windows` crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several dependencies so that the `nu` binary only depends on `0.56.0`. On my machine, this PR makes `cargo build` about 10% faster. The polars plugin still uses its own version of the `windows` crate though, which is not ideal. We'll need to bump the `polars` crate to fix that, but it breaks a lot of our code. (`polars 1.0` release anyone?) |
||
Jack Wright
|
7c5dcbb3fc |
Update to rust 1.80.1 (#14106)
This can be merged on 10/17 once 1.82.0 is out. --------- Co-authored-by: Wind <WindSoilder@outlook.com> |
||
|
Stefan Holderbach
|
f061c9a30e
|
Bump to 0.99.2 (#14136) | ||
Ian Manske
|
28b6db115a
|
Revert PRs for 0.99.1 patch (#14119)
# Description Temporarily reverts PRs merged after the 0.99.1 bump. |
||
|
YizhePKU
|
5e784d38eb
|
Reduce duplicate dependencies on the windows crate (#14105)
Nushell currently depends on three different versions of the `windows` crate: `0.44.0`, `0.52.0`, and `0.54.0`. This PR bumps several dependencies so that the `nu` binary only depends on `0.56.0`. On my machine, this PR makes `cargo build` about 10% faster. The polars plugin still uses its own version of the `windows` crate though, which is not ideal. We'll need to bump the `polars` crate to fix that, but it breaks a lot of our code. (`polars 1.0` release anyone?) |
||
|
Jack Wright
|
868029f655
|
Update to rust 1.80.1 (#14106)
This can be merged on 10/17 once 1.82.0 is out. --------- Co-authored-by: Wind <WindSoilder@outlook.com> |
||
Devyn Cairns
|
59d6dee3b3
|
Bump to version 0.99.1 (#14100)
Post-release patch bump. |
||
Jakub Žádník
|
91ff57faa7
|
Bump to version 0.99.0 (#14094)
<!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description <!-- Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes. Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience. --> # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
|
Jack Wright
|
b99affba4b
|
bumping reedline to version 0.36 (#14093) | ||
|
dependabot[bot]
|
ba4becc61c
|
Bump indexmap from 2.5.0 to 2.6.0 (#13983)
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.5.0 to 2.6.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's changelog</a>.</em></p> <blockquote> <h2>2.6.0 (2024-10-01)</h2> <ul> <li>Implemented <code>Clone</code> for <code>map::IntoIter</code> and <code>set::IntoIter</code>.</li> <li>Updated the <code>hashbrown</code> dependency to version 0.15.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
573a7e2c7b
|
Bump tempfile from 3.12.0 to 3.13.0 (#13984)
Bumps [tempfile](https://github.com/Stebalien/tempfile) from 3.12.0 to 3.13.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/Stebalien/tempfile/blob/master/CHANGELOG.md">tempfile's changelog</a>.</em></p> <blockquote> <h2>3.13.0</h2> <ul> <li>Add <code>with_suffix</code> constructors for easily creating new temporary files with a specific suffix (e.g., a specific file extension). Thanks to <a href="https://github.com/Borgerr"><code>@Borgerr</code></a>.</li> <li>Update dependencies (fastrand & rustix).</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
cebbc82322
|
Bump once_cell from 1.19.0 to 1.20.1 (#13982)
Bumps [once_cell](https://github.com/matklad/once_cell) from 1.19.0 to 1.20.1. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/matklad/once_cell/blob/master/CHANGELOG.md">once_cell's changelog</a>.</em></p> <blockquote> <h2>1.20.1</h2> <ul> <li>Allow using <code>race</code> module using just <code>portable_atomic</code>, without <code>critical_section</code> and provide better error messages on targets without atomic CAS instruction, <a href="https://redirect.github.com/matklad/once_cell/pull/265">#265</a>.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Darren Schroeder
|
4bd38847c2
|
update human-date-parser crate (#13962)
# Description closes https://github.com/nushell/nushell/issues/13759 and fixes some odd behavior from the human-date-parser crate. # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
|
Darren Schroeder
|
0d30550950
|
update reedline to the latest 660a5074 (#13909)
# Description This PR updates nushell to the latest reedline commit 660a5074 # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
|
dependabot[bot]
|
18c8c16c5e
|
Bump unicode-segmentation from 1.11.0 to 1.12.0 (#13862)
Bumps [unicode-segmentation](https://github.com/unicode-rs/unicode-segmentation) from 1.11.0 to 1.12.0. <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
299a218de7
|
Bump tango-bench from 0.5.0 to 0.6.0 (#13861)
Bumps [tango-bench](https://github.com/bazhenov/tango) from 0.5.0 to 0.6.0. <details> <summary>Commits</summary> <ul> <li><a href=" |
||
Wind
|
1a081c09de
|
Bump version to 0.98.1 (#13896) | ||
|
Devyn Cairns
|
6e1e824473
|
Bump version to 0.98.0 (#13865)
|
||
|
Darren Schroeder
|
2afc6a974e
|
bump rust version to 1.79.0 (#13809)
# Description This PR bumps our rust version from 1.78 to 1.79.0 due to the 1.81.0 release. # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
|
Darren Schroeder
|
edd69aa283
|
update the latest reedline (#13797)
# Description I swear, I only did `cargo update -p reedline`. However, I feel down the dependency rabbit hole. We need to get nushell on crossterm 28.1 and ratatui on 28.1 but we can't because tabled uses papergrid which uses an older version of unicode-width that can't be upgraded apparently. Ugh. I've opened an issue at the tabled repo about this. # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
|
Stefan Holderbach
|
92091599ff
|
Fixup serde feature selection in nu-protocol (#13793)
Discovered by @cptpiepmatz that #13749 broke the standalone check for `nu-protocol` Explicit use of the feature as workspace root also disables all features for `serde`. Alternatively we could reconsider this there. |
||
|
dependabot[bot]
|
e7b7c7f39a
|
Bump nix from 0.28.0 to 0.29.0 (#13773)
Bumps [nix](https://github.com/nix-rust/nix) from 0.28.0 to 0.29.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/nix-rust/nix/blob/master/CHANGELOG.md">nix's changelog</a>.</em></p> <blockquote> <h2>[0.29.0] - 2024-05-24</h2> <h3>Added</h3> <ul> <li>Add <code>getregset()/setregset()</code> for Linux/glibc/x86/x86_64/aarch64/riscv64 and <code>getregs()/setregs()</code> for Linux/glibc/aarch64/riscv64 (<a href="https://redirect.github.com/nix-rust/nix/pull/2044">#2044</a>)</li> <li>Add socket option Ipv6Ttl for apple targets. (<a href="https://redirect.github.com/nix-rust/nix/pull/2287">#2287</a>)</li> <li>Add socket option UtunIfname. (<a href="https://redirect.github.com/nix-rust/nix/pull/2325">#2325</a>)</li> <li>make SigAction repr(transparent) & can be converted to the libc raw type (<a href="https://redirect.github.com/nix-rust/nix/pull/2326">#2326</a>)</li> <li>Add <code>From</code> trait implementation for conversions between <code>sockaddr_in</code> and <code>SockaddrIn</code>, <code>sockaddr_in6</code> and <code>SockaddrIn6</code> (<a href="https://redirect.github.com/nix-rust/nix/pull/2328">#2328</a>)</li> <li>Add socket option ReusePortLb for FreeBSD. (<a href="https://redirect.github.com/nix-rust/nix/pull/2332">#2332</a>)</li> <li>Added support for openat2 on linux. (<a href="https://redirect.github.com/nix-rust/nix/pull/2339">#2339</a>)</li> <li>Add if_indextoname function. (<a href="https://redirect.github.com/nix-rust/nix/pull/2340">#2340</a>)</li> <li>Add <code>mount</code> and <code>unmount</code> API for apple targets. (<a href="https://redirect.github.com/nix-rust/nix/pull/2347">#2347</a>)</li> <li>Added <code>_PC_MIN_HOLE_SIZE</code> for <code>pathconf</code> and <code>fpathconf</code>. (<a href="https://redirect.github.com/nix-rust/nix/pull/2349">#2349</a>)</li> <li>Added <code>impl AsFd for pty::PtyMaster</code> (<a href="https://redirect.github.com/nix-rust/nix/pull/2355">#2355</a>)</li> <li>Add <code>open</code> flag <code>O_SEARCH</code> to AIX, Empscripten, FreeBSD, Fuchsia, solarish, WASI (<a href="https://redirect.github.com/nix-rust/nix/pull/2374">#2374</a>)</li> <li>Add prctl function <code>prctl_set_vma_anon_name</code> for Linux/Android. (<a href="https://redirect.github.com/nix-rust/nix/pull/2378">#2378</a>)</li> <li>Add <code>sync(2)</code> for <code>apple_targets/solarish/haiku/aix/hurd</code>, <code>syncfs(2)</code> for <code>hurd</code> and <code>fdatasync(2)</code> for <code>aix/hurd</code> (<a href="https://redirect.github.com/nix-rust/nix/pull/2379">#2379</a>)</li> <li>Add fdatasync support for Apple targets. (<a href="https://redirect.github.com/nix-rust/nix/pull/2380">#2380</a>)</li> <li>Add <code>fcntl::OFlag::O_PATH</code> for FreeBSD and Fuchsia (<a href="https://redirect.github.com/nix-rust/nix/pull/2382">#2382</a>)</li> <li>Added <code>PathconfVar::MIN_HOLE_SIZE</code> for apple_targets. (<a href="https://redirect.github.com/nix-rust/nix/pull/2388">#2388</a>)</li> <li>Add <code>open</code> flag <code>O_SEARCH</code> to apple_targets (<a href="https://redirect.github.com/nix-rust/nix/pull/2391">#2391</a>)</li> <li><code>O_DSYNC</code> may now be used with <code>aio_fsync</code> and <code>fcntl</code> on FreeBSD. (<a href="https://redirect.github.com/nix-rust/nix/pull/2404">#2404</a>)</li> <li>Added <code>Flock::relock</code> for upgrading and downgrading locks. (<a href="https://redirect.github.com/nix-rust/nix/pull/2407">#2407</a>)</li> </ul> <h3>Changed</h3> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
6be458c686
|
Bump itertools from 0.12.1 to 0.13.0 (#13774)
Bumps [itertools](https://github.com/rust-itertools/itertools) from 0.12.1 to 0.13.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/rust-itertools/itertools/blob/master/CHANGELOG.md">itertools's changelog</a>.</em></p> <blockquote> <h2>0.13.0</h2> <h3>Breaking</h3> <ul> <li>Removed implementation of <code>DoubleEndedIterator</code> for <code>ConsTuples</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/853">#853</a>)</li> <li>Made <code>MultiProduct</code> fused and fixed on an empty iterator (<a href="https://redirect.github.com/rust-itertools/itertools/issues/835">#835</a>, <a href="https://redirect.github.com/rust-itertools/itertools/issues/834">#834</a>)</li> <li>Changed <code>iproduct!</code> to return tuples for maxi one iterator too (<a href="https://redirect.github.com/rust-itertools/itertools/issues/870">#870</a>)</li> <li>Changed <code>PutBack::put_back</code> to return the old value (<a href="https://redirect.github.com/rust-itertools/itertools/issues/880">#880</a>)</li> <li>Removed deprecated <code>repeat_call, Itertools::{foreach, step, map_results, fold_results}</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/878">#878</a>)</li> <li>Removed <code>TakeWhileInclusive::new</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/912">#912</a>)</li> </ul> <h3>Added</h3> <ul> <li>Added <code>Itertools::{smallest_by, smallest_by_key, largest, largest_by, largest_by_key}</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/654">#654</a>, <a href="https://redirect.github.com/rust-itertools/itertools/issues/885">#885</a>)</li> <li>Added <code>Itertools::tail</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/899">#899</a>)</li> <li>Implemented <code>DoubleEndedIterator</code> for <code>ProcessResults</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/910">#910</a>)</li> <li>Implemented <code>Debug</code> for <code>FormatWith</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/931">#931</a>)</li> <li>Added <code>Itertools::get</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/891">#891</a>)</li> </ul> <h3>Changed</h3> <ul> <li>Deprecated <code>Itertools::group_by</code> (renamed <code>chunk_by</code>) (<a href="https://redirect.github.com/rust-itertools/itertools/issues/866">#866</a>, <a href="https://redirect.github.com/rust-itertools/itertools/issues/879">#879</a>)</li> <li>Deprecated <code>unfold</code> (use <code>std::iter::from_fn</code> instead) (<a href="https://redirect.github.com/rust-itertools/itertools/issues/871">#871</a>)</li> <li>Optimized <code>GroupingMapBy</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/873">#873</a>, <a href="https://redirect.github.com/rust-itertools/itertools/issues/876">#876</a>)</li> <li>Relaxed <code>Fn</code> bounds to <code>FnMut</code> in <code>diff_with, Itertools::into_group_map_by</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/886">#886</a>)</li> <li>Relaxed <code>Debug/Clone</code> bounds for <code>MapInto</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/889">#889</a>)</li> <li>Documented the <code>use_alloc</code> feature (<a href="https://redirect.github.com/rust-itertools/itertools/issues/887">#887</a>)</li> <li>Optimized <code>Itertools::set_from</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/888">#888</a>)</li> <li>Removed badges in <code>README.md</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/890">#890</a>)</li> <li>Added "no-std" categories in <code>Cargo.toml</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/894">#894</a>)</li> <li>Fixed <code>Itertools::k_smallest</code> on short unfused iterators (<a href="https://redirect.github.com/rust-itertools/itertools/issues/900">#900</a>)</li> <li>Deprecated <code>Itertools::tree_fold1</code> (renamed <code>tree_reduce</code>) (<a href="https://redirect.github.com/rust-itertools/itertools/issues/895">#895</a>)</li> <li>Deprecated <code>GroupingMap::fold_first</code> (renamed <code>reduce</code>) (<a href="https://redirect.github.com/rust-itertools/itertools/issues/902">#902</a>)</li> <li>Fixed <code>Itertools::k_smallest(0)</code> to consume the iterator, optimized <code>Itertools::k_smallest(1)</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/909">#909</a>)</li> <li>Specialized <code>Combinations::nth</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/914">#914</a>)</li> <li>Specialized <code>MergeBy::fold</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/920">#920</a>)</li> <li>Specialized <code>CombinationsWithReplacement::nth</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/923">#923</a>)</li> <li>Specialized <code>FlattenOk::{fold, rfold}</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/927">#927</a>)</li> <li>Specialized <code>Powerset::nth</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/924">#924</a>)</li> <li>Documentation fixes (<a href="https://redirect.github.com/rust-itertools/itertools/issues/882">#882</a>, <a href="https://redirect.github.com/rust-itertools/itertools/issues/936">#936</a>)</li> <li>Fixed <code>assert_equal</code> for iterators longer than <code>i32::MAX</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/932">#932</a>)</li> <li>Updated the <code>must_use</code> message of non-lazy <code>KMergeBy</code> and <code>TupleCombinations</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/939">#939</a>)</li> </ul> <h3>Notable Internal Changes</h3> <ul> <li>Tested iterator laziness (<a href="https://redirect.github.com/rust-itertools/itertools/issues/792">#792</a>)</li> <li>Created <code>CONTRIBUTING.md</code> (<a href="https://redirect.github.com/rust-itertools/itertools/issues/767">#767</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
348c59b740
|
Bump indexmap from 2.4.0 to 2.5.0 (#13772)
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.4.0 to 2.5.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's changelog</a>.</em></p> <blockquote> <h2>2.5.0</h2> <ul> <li>Added an <code>insert_before</code> method to <code>IndexMap</code> and <code>IndexSet</code>, as an alternative to <code>shift_insert</code> with different behavior on existing entries.</li> <li>Added <code>first_entry</code> and <code>last_entry</code> methods to <code>IndexMap</code>.</li> <li>Added <code>From</code> implementations between <code>IndexedEntry</code> and <code>OccupiedEntry</code>.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Stefan Holderbach
|
84e1ac27e5
|
Setup global cargo lint configuration (#13691)
# Description `cargo` somewhat recently gained the capability to store `lints` settings for the crate and workspace, that can override the defaults from `rustc` and `clippy` lints. This means we can enforce some lints without having to actively pass them to clippy via `cargo clippy -- -W ...`. So users just forking the repo have an easier time to follow similar requirements like our CI. ## Limitation An exception that remains is that those lints apply to both the primary code base and the tests. Thus we can't include e.g. `unwrap_used` without generating noise in the tests. Here the setup in the CI remains the most helpful. ## Included lints - Add `clippy::unchecked_duration_subtraction` (added by #12549) # User-Facing Changes Running `cargo clippy --workspace` should be closer to the CI. This has benefits for editor configured runs of clippy and saves you from having to use `toolkit` to be close to CI in more cases. |
||
|
Stefan Holderbach
|
2c379cba71
|
Remove system-clipboard from the default build (#13694)
# Description This feature tried to connect reedline with the system clipboard for three special bindings. To do so it uses the `arboard` crate with heavy dependencies for the system X or Wayland server or the Windows APIs. We had issues in the headless CI with it and builds with musl seem to stall. Removing it from the default build should negatively impact only a small subset of users aware of the extra bindings. You can still use the internal clipboard for binding based selection and the terminals extra bindings to copy arbitrary content into the system clipboard. For all other users it removes potential sources of failure and a whole 1 MB of release mode binary size (> 2% reduction). Furthermore a potentially substantial attack surface for Nushell is gone for default builds. - Should resolve #13019 - Work in the spirit of #13603 # User-Facing Changes The `edit` entries `copyselectionsystem`/`copyselectionsystem`/`pastesystem` for keybindings are gone in the default build If you strictly depend on this behavior, you can still build with the addition of `--features system-clipboard` |
||
Piepmatz
|
055d7e27e9
|
Use heck instead of convert_case for nu-derive-value (#13708)
<!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description <!-- Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes. Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience. --> @sholderbach mentioned that I introduced `convert_case` as a dependency while we already had `heck` for case conversion. So in this PR replaced the use `convert_case` with `heck`. Mostly I rebuilt the `convert_case` API with `heck` to work with it as I like the API of `convert_case` more than `heck`. # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> Nothing changed, the use of `convert_case` wasn't exposed anywhere and all case conversions are still available. # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> No new tests required but my tests in `test_derive` captured some errors I made while developing this change, (hurray, tests work 🎉) - 🟢 `toolkit fmt` - 🟢 `toolkit clippy` - 🟢 `toolkit test` - 🟢 `toolkit test stdlib` # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
|
Stefan Holderbach
|
af76e11dd6
|
Remove str deunicode (#13693)
# Description Closes #13677 Remove the command `str deunicode`, as it has a narrow application, is loosely defined by the data provided by the `deunicode` crate and thus a stabilization liability post-1.0. Furthermore the data to perform the look-up is quite substantial. Removing the command and the `deunicode` dependency saves 0.9 MB of binary data in release mode (~ 2% of total) (checked via `cargo bloat --release` for a linux x86 build) # User-Facing Changes The `str deunicode` command recently added in #13270 is gone |
||
Maxim Zhiburt
|
525eac1afd
|
[DRAFT] Check fix for emojie, wrap issues (#13430)
Hi there Here I am using latest tabled. My tests shows it does fixes panics, but I am wanna be sure. @fdncred could you verify that it does fixes those panics/errors? Closes #13405 Closes #12786 |
||
Andrej Kolčin
|
822007dbbb
|
Remove unused same-file workspace dependency (#13678)
A small no-op change. It was used in a two years old `mv` fix
(
|
||
|
Andrej Kolčin
|
0560826414
|
encode/decode for multiple alphabets (#13428)
Based on the discussion in #13419. ## Description Reworks the `decode`/`encode` commands by adding/changing the following bases: - `base32` - `base32hex` - `hex` - `new-base64` The `hex` base is compatible with the previous version of `hex` out of the box (it only adds more flags). `base64` isn't, so the PR adds a new version and deprecates the old one. All commands have `string -> binary` signature for decoding and `string | binary -> string` signature for encoding. A few `base64` encodings, which are not a part of the [RFC4648](https://datatracker.ietf.org/doc/html/rfc4648#section-6), have been dropped. ## Example usage ```Nushell ~/fork/nushell> "string" | encode base32 | decode base32 | decode string ``` ```Nushell ~/fork/nushell> "ORSXG5A=" | decode base32 # `decode` always returns a binary value Length: 4 (0x4) bytes | printable whitespace ascii_other non_ascii 00000000: 74 65 73 74 test ``` ## User-Facing Changes - New commands: `encode/decode base32/base32hex`. - `encode hex` gets a `--lower` flag. - `encode/decode base64` deprecated in favor of `encode/decode new-base64`. |
||
|
Piepmatz
|
712fec166d
|
Improve working with IntoValue and FromValue for byte collections (#13641)
<!-- if this PR closes one or more issues, you can automatically link the PR with them by using one of the [*linking keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword), e.g. - this PR should close #xxxx - fixes #xxxx you can also mention related issues, PRs or discussions! --> # Description <!-- Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes. Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience. --> I was working with byte collections like `Vec<u8>` and [`bytes::Bytes`](https://docs.rs/bytes/1.7.1/bytes/struct.Bytes.html), both are currently not possible to be used directly in a struct that derives `IntoValue` and `FromValue` at the same time. The `Vec<u8>` will convert itself into a `Value::List` but expects a `Value::String` or `Value::Binary` to load from. I now also implemented that it can load from `Value::List` just like the other `Vec<uX>` versions. For further working with byte collections the type `bytes::Bytes` is wildly used, therefore I added a implementation for it. `bytes` is already part of the dependency graph as many crates (more than 5000 to crates.io) use it. # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> User of `nu-protocol` as library, e.g. plugin developers, can now use byte collections more easily in their data structures and derive `IntoValue` and `FromValue` for it. # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> I added a few tests that check that these byte collections are correctly translated in and from `Value`. They live in `test_derive.rs` as part of the `ByteContainer` and I also explicitely tested that `FromValue` for `Vec<u8>` works as expected. - 🟢 `toolkit fmt` - 🟢 `toolkit clippy` - 🟢 `toolkit test` - 🟢 `toolkit test stdlib` # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> Maybe it should be explored if `Value::Binary` should use `bytes::Bytes` instead of `Vec<u8>`. |
||
|
Stefan Holderbach
|
e211b7ba53
|
Bump version to 0.97.2 (#13666) | ||
|
Devyn Cairns
|
60769ac1ba
|
Bump version to 0.97.1 (#13659)
# Description Bump version to `0.97.1`, which will be the actual next major release. (`0.97.0` had a bug.) |
||
|
Jack Wright
|
d667b3c0bc
|
bumped version number to 0.97 (#13655) | ||
Bruce Weirdan
|
a80273bd7b
|
Drop unused fs_extra and hamcrest2 dependencies (#13628)
Fixes nushell/nushell#7995 # Description This dependency is no longer used by nushell itself. # User-Facing Changes None. # Tests + Formatting Pased. # After Submitting None. |
||
|
dependabot[bot]
|
e841fce0f9
|
Bump indexmap from 2.3.0 to 2.4.0 (#13617)
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.3.0 to 2.4.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's changelog</a>.</em></p> <blockquote> <h2>2.4.0</h2> <ul> <li>Added methods <code>IndexMap::append</code> and <code>IndexSet::append</code>, moving all items from one map or set into another, and leaving the original capacity for reuse.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Darren Schroeder
|
5f45f6c223
|
add more helpful error with text/xml (#13609)
# Description This PR is meant to provide a more helpful error message when using http get and the content type can't be parsed. ### Before  ### After  The span isn't perfect but there's no way to get the span of the content type that I can see. In the middle of fixing this error, I also discovered how to fix the problem in general. Since you can now see the error message complaining about double quotes (char 22 at position 0. 22 hex is `"`). The fix is just to remove all the double quotes from the content_type and then you get this. ### After After  The discussion on Discord about this is that `--raw` or `--ignore-errors` should eat this error and it "just work" as well as default to text or binary when the mime parsing fails. I agree but this PR does not implement that. # User-Facing Changes <!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. --> # Tests + Formatting <!-- Don't forget to add tests that cover your changes. Make sure you've run and fixed any issues with these commands: - `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes) - `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to check that you're using the standard code style - `cargo test --workspace` to check that all tests pass (on Windows make sure to [enable developer mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging)) - `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the tests for the standard library > **Note** > from `nushell` you can also use the `toolkit` as follows > ```bash > use toolkit.nu # or use an `env_change` hook to activate it automatically > toolkit check pr > ``` --> # After Submitting <!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. --> |
||
|
dependabot[bot]
|
ce13ecfd10
|
Bump mockito from 1.4.0 to 1.5.0 (#13558)
Bumps [mockito](https://github.com/lipanski/mockito) from 1.4.0 to 1.5.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/lipanski/mockito/releases">mockito's releases</a>.</em></p> <blockquote> <h2>1.5.0</h2> <ul> <li><strong>[Breaking]</strong> <a href="https://redirect.github.com/lipanski/mockito/pull/198">Upgrade</a> to hyper v1</li> </ul> <p>Thanks to <a href="https://github.com/tottoto"><code>@tottoto</code></a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
bc6947cd09
|
Bump quick-xml from 0.31.0 to 0.32.0 (#13560)
Bumps [quick-xml](https://github.com/tafia/quick-xml) from 0.31.0 to 0.32.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/tafia/quick-xml/releases">quick-xml's releases</a>.</em></p> <blockquote> <h2>v0.32.0</h2> <h2>Significant Changes</h2> <p>The method of reporting positions of errors has changed - use <code>error_position()</code> to get an offset of the error position. For <code>SyntaxError</code>s the range <code>error_position()..buffer_position()</code> also will represent a span of error.</p> <h3>⚠️ Breaking Changes</h3> <p>The way to configure parser has changed. Now all configuration is contained in the <code>Config</code> struct and can be applied at once. When <code>serde-types</code> feature is enabled, configuration is serializable.</p> <p>The way of resolve entities with <code>unescape_with</code> has changed. Those methods no longer resolve predefined entities (<code>lt</code>, <code>gt</code>, <code>apos</code>, <code>quot</code>, <code>amp</code>). <code>NoEntityResolver</code> renamed to <code>PredefinedEntityResolver</code>.</p> <p><code>Writer::create_element</code> now accepts <code>impl Into<Cow<str>></code> instead of <code>&impl AsRef<str></code>.</p> <p>Minimum supported version of serde raised to 1.0.139</p> <p>The full changelog is below.</p> <h2>What's Changed</h2> <h3>New Features</h3> <ul> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/513">#513</a>: Allow to continue parsing after getting new <code>Error::IllFormed</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/677">#677</a>: Added methods <code>config()</code> and <code>config_mut()</code> to inspect and change the parser configuration. Previous builder methods on <code>Reader</code> / <code>NsReader</code> was replaced by direct access to fields of config using <code>reader.config_mut().<...></code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/684">#684</a>: Added a method <code>Config::enable_all_checks</code> to turn on or off all well-formedness checks.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/362">#362</a>: Added <code>escape::minimal_escape()</code> which escapes only <code>&</code> and <code><</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/362">#362</a>: Added <code>BytesCData::minimal_escape()</code> which escapes only <code>&</code> and <code><</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/362">#362</a>: Added <code>Serializer::set_quote_level()</code> which allow to set desired level of escaping.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/705">#705</a>: Added <code>NsReader::prefixes()</code> to list all the prefixes currently declared.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/629">#629</a>: Added a default case to <code>impl_deserialize_for_internally_tagged_enum</code> macro so that it can handle every attribute that does not match existing cases within an enum variant.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/722">#722</a>: Allow to pass owned strings to <code>Writer::create_element</code>. This is breaking change!</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/275">#275</a>: Added <code>ElementWriter::new_line()</code> which enables pretty printing elements with multiple attributes.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/743">#743</a>: Added <code>Deserializer::get_ref()</code> to get XML Reader from serde Deserializer</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/734">#734</a>: Added helper functions to resolve predefined XML and HTML5 entities: <ul> <li><code>quick_xml::escape::resolve_predefined_entity</code></li> <li><code>quick_xml::escape::resolve_xml_entity</code></li> <li><code>quick_xml::escape::resolve_html5_entity</code></li> </ul> </li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/753">#753</a>: Added parser for processing instructions: <code>quick_xml::reader::PiParser</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/754">#754</a>: Added parser for elements: <code>quick_xml::reader::ElementParser</code>.</li> </ul> <h3>Bug Fixes</h3> <ul> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/622">#622</a>: Fix wrong disregarding of not closed markup, such as lone <code><</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/684">#684</a>: Fix incorrect position reported for <code>Error::IllFormed(DoubleHyphenInComment)</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/684">#684</a>: Fix incorrect position reported for <code>Error::IllFormed(MissingDoctypeName)</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/704">#704</a>: Fix empty tags with attributes not being expanded when <code>expand_empty_elements</code> is set to true.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/683">#683</a>: Use local tag name when check tag name against possible names for field.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/753">#753</a>: Correctly determine end of processing instructions and XML declaration.</li> </ul> <h3>Misc Changes</h3> <ul> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/675">#675</a>: Minimum supported version of serde raised to 1.0.139</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/675">#675</a>: Rework the <code>quick_xml::Error</code> type to provide more accurate information:</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/tafia/quick-xml/blob/master/Changelog.md">quick-xml's changelog</a>.</em></p> <blockquote> <h2>0.32.0 -- 2024-06-10</h2> <p>The way to configure parser is changed. Now all configuration is contained in the <code>Config</code> struct and can be applied at once. When <code>serde-types</code> feature is enabled, configuration is serializable.</p> <p>The method of reporting positions of errors has changed - use <code>error_position()</code> to get an offset of the error position. For <code>SyntaxError</code>s the range <code>error_position()..buffer_position()</code> also will represent a span of error.</p> <p>The way of resolve entities with <code>unescape_with</code> are changed. Those methods no longer resolve predefined entities.</p> <h3>New Features</h3> <ul> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/513">#513</a>: Allow to continue parsing after getting new <code>Error::IllFormed</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/677">#677</a>: Added methods <code>config()</code> and <code>config_mut()</code> to inspect and change the parser configuration. Previous builder methods on <code>Reader</code> / <code>NsReader</code> was replaced by direct access to fields of config using <code>reader.config_mut().<...></code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/684">#684</a>: Added a method <code>Config::enable_all_checks</code> to turn on or off all well-formedness checks.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/362">#362</a>: Added <code>escape::minimal_escape()</code> which escapes only <code>&</code> and <code><</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/362">#362</a>: Added <code>BytesCData::minimal_escape()</code> which escapes only <code>&</code> and <code><</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/362">#362</a>: Added <code>Serializer::set_quote_level()</code> which allow to set desired level of escaping.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/705">#705</a>: Added <code>NsReader::prefixes()</code> to list all the prefixes currently declared.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/629">#629</a>: Added a default case to <code>impl_deserialize_for_internally_tagged_enum</code> macro so that it can handle every attribute that does not match existing cases within an enum variant.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/722">#722</a>: Allow to pass owned strings to <code>Writer::create_element</code>. This is breaking change!</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/275">#275</a>: Added <code>ElementWriter::new_line()</code> which enables pretty printing elements with multiple attributes.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/743">#743</a>: Added <code>Deserializer::get_ref()</code> to get XML Reader from serde Deserializer</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/734">#734</a>: Added helper functions to resolve predefined XML and HTML5 entities: <ul> <li><code>quick_xml::escape::resolve_predefined_entity</code></li> <li><code>quick_xml::escape::resolve_xml_entity</code></li> <li><code>quick_xml::escape::resolve_html5_entity</code></li> </ul> </li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/753">#753</a>: Added parser for processing instructions: <code>quick_xml::reader::PiParser</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/754">#754</a>: Added parser for elements: <code>quick_xml::reader::ElementParser</code>.</li> </ul> <h3>Bug Fixes</h3> <ul> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/622">#622</a>: Fix wrong disregarding of not closed markup, such as lone <code><</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/684">#684</a>: Fix incorrect position reported for <code>Error::IllFormed(DoubleHyphenInComment)</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/684">#684</a>: Fix incorrect position reported for <code>Error::IllFormed(MissingDoctypeName)</code>.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/704">#704</a>: Fix empty tags with attributes not being expanded when <code>expand_empty_elements</code> is set to true.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/683">#683</a>: Use local tag name when check tag name against possible names for field.</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/753">#753</a>: Correctly determine end of processing instructions and XML declaration.</li> </ul> <h3>Misc Changes</h3> <ul> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/675">#675</a>: Minimum supported version of serde raised to 1.0.139</li> <li><a href="https://redirect.github.com/tafia/quick-xml/issues/675">#675</a>: Rework the <code>quick_xml::Error</code> type to provide more accurate information:</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
edee2a3c15
|
Bump indexmap from 2.2.6 to 2.3.0 (#13557)
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.2.6 to 2.3.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's changelog</a>.</em></p> <blockquote> <h2>2.3.0</h2> <ul> <li>Added trait <code>MutableEntryKey</code> for opt-in mutable access to map entry keys.</li> <li>Added method <code>MutableKeys::iter_mut2</code> for opt-in mutable iteration of map keys and values.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |