# Description
Allows `Stack` to have a modified local `Config`, which is updated
immediately when `$env.config` is assigned to. This means that even
within a script, commands that come after `$env.config` changes will
always see those changes in `Stack::get_config()`.
Also fixed a lot of cases where `engine_state.get_config()` was used
even when `Stack` was available.
Closes#13324.
# User-Facing Changes
- Config changes apply immediately after the assignment is executed,
rather than whenever config is read by a command that needs it.
- Potentially slower performance when executing a lot of lines that
change `$env.config` one after another. Recommended to get `$env.config`
into a `mut` variable first and do modifications, then assign it back.
- Much faster performance when executing a script that made
modifications to `$env.config`, as the changes are only parsed once.
# Tests + Formatting
All passing.
# After Submitting
- [ ] release notes
# Description
This PR adds an internal representation language to Nushell, offering an
alternative evaluator based on simple instructions, stream-containing
registers, and indexed control flow. The number of registers required is
determined statically at compile-time, and the fixed size required is
allocated upon entering the block.
Each instruction is associated with a span, which makes going backwards
from IR instructions to source code very easy.
Motivations for IR:
1. **Performance.** By simplifying the evaluation path and making it
more cache-friendly and branch predictor-friendly, code that does a lot
of computation in Nushell itself can be sped up a decent bit. Because
the IR is fairly easy to reason about, we can also implement
optimization passes in the future to eliminate and simplify code.
2. **Correctness.** The instructions mostly have very simple and
easily-specified behavior, so hopefully engine changes are a little bit
easier to reason about, and they can be specified in a more formal way
at some point. I have made an effort to document each of the
instructions in the docs for the enum itself in a reasonably specific
way. Some of the errors that would have happened during evaluation
before are now moved to the compilation step instead, because they don't
make sense to check during evaluation.
3. **As an intermediate target.** This is a good step for us to bring
the [`new-nu-parser`](https://github.com/nushell/new-nu-parser) in at
some point, as code generated from new AST can be directly compared to
code generated from old AST. If the IR code is functionally equivalent,
it will behave the exact same way.
4. **Debugging.** With a little bit more work, we can probably give
control over advancing the virtual machine that `IrBlock`s run on to
some sort of external driver, making things like breakpoints and single
stepping possible. Tools like `view ir` and [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir) make it easier than
before to see what exactly is going on with your Nushell code.
The goal is to eventually replace the AST evaluator entirely, once we're
sure it's working just as well. You can help dogfood this by running
Nushell with `$env.NU_USE_IR` set to some value. The environment
variable is checked when Nushell starts, so config runs with IR, or it
can also be set on a line at the REPL to change it dynamically. It is
also checked when running `do` in case within a script you want to just
run a specific piece of code with or without IR.
# Example
```nushell
view ir { |data|
mut sum = 0
for n in $data {
$sum += $n
}
$sum
}
```
```gas
# 3 registers, 19 instructions, 0 bytes of data
0: load-literal %0, int(0)
1: store-variable var 904, %0 # let
2: drain %0
3: drop %0
4: load-variable %1, var 903
5: iterate %0, %1, end 15 # for, label(1), from(14:)
6: store-variable var 905, %0
7: load-variable %0, var 904
8: load-variable %2, var 905
9: binary-op %0, Math(Plus), %2
10: span %0
11: store-variable var 904, %0
12: load-literal %0, nothing
13: drain %0
14: jump 5
15: drop %0 # label(0), from(5:)
16: drain %0
17: load-variable %0, var 904
18: return %0
```
# Benchmarks
All benchmarks run on a base model Mac Mini M1.
## Iterative Fibonacci sequence
This is about as best case as possible, making use of the much faster
control flow. Most code will not experience a speed improvement nearly
this large.
```nushell
def fib [n: int] {
mut a = 0
mut b = 1
for _ in 2..=$n {
let c = $a + $b
$a = $b
$b = $c
}
$b
}
use std bench
bench { 0..50 | each { |n| fib $n } }
```
IR disabled:
```
╭───────┬─────────────────╮
│ mean │ 1ms 924µs 665ns │
│ min │ 1ms 700µs 83ns │
│ max │ 3ms 450µs 125ns │
│ std │ 395µs 759ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
IR enabled:
```
╭───────┬─────────────────╮
│ mean │ 452µs 820ns │
│ min │ 427µs 417ns │
│ max │ 540µs 167ns │
│ std │ 17µs 158ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
##
[gradient_benchmark_no_check.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/gradient_benchmark_no_check.nu)
IR disabled:
```
╭───┬──────────────────╮
│ 0 │ 27ms 929µs 958ns │
│ 1 │ 21ms 153µs 459ns │
│ 2 │ 18ms 639µs 666ns │
│ 3 │ 19ms 554µs 583ns │
│ 4 │ 13ms 383µs 375ns │
│ 5 │ 11ms 328µs 208ns │
│ 6 │ 5ms 659µs 542ns │
╰───┴──────────────────╯
```
IR enabled:
```
╭───┬──────────────────╮
│ 0 │ 22ms 662µs │
│ 1 │ 17ms 221µs 792ns │
│ 2 │ 14ms 786µs 708ns │
│ 3 │ 13ms 876µs 834ns │
│ 4 │ 13ms 52µs 875ns │
│ 5 │ 11ms 269µs 666ns │
│ 6 │ 6ms 942µs 500ns │
╰───┴──────────────────╯
```
##
[random-bytes.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/random-bytes.nu)
I got pretty random results out of this benchmark so I decided not to
include it. Not clear why.
# User-Facing Changes
- IR compilation errors may appear even if the user isn't evaluating
with IR.
- IR evaluation can be enabled by setting the `NU_USE_IR` environment
variable to any value.
- New command `view ir` pretty-prints the IR for a block, and `view ir
--json` can be piped into an external tool like [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir).
# Tests + Formatting
All tests are passing with `NU_USE_IR=1`, and I've added some more eval
tests to compare the results for some very core operations. I will
probably want to add some more so we don't have to always check
`NU_USE_IR=1 toolkit test --workspace` on a regular basis.
# After Submitting
- [ ] release notes
- [ ] further documentation of instructions?
- [ ] post-release: publish `nu_plugin_explore_ir`
# Description
This PR introduces a new `Signals` struct to replace our adhoc passing
around of `ctrlc: Option<Arc<AtomicBool>>`. Doing so has a few benefits:
- We can better enforce when/where resetting or triggering an interrupt
is allowed.
- Consolidates `nu_utils::ctrl_c::was_pressed` and other ad-hoc
re-implementations into a single place: `Signals::check`.
- This allows us to add other types of signals later if we want. E.g.,
exiting or suspension.
- Similarly, we can more easily change the underlying implementation if
we need to in the future.
- Places that used to have a `ctrlc` of `None` now use
`Signals::empty()`, so we can double check these usages for correctness
in the future.
This reverts commit 0cfd5fbece.
The original PR messed up syntax higlighting of aliases and causes
panics of completion in the presence of alias.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Part of https://github.com/nushell/nushell/issues/12963, step 2.
This PR refactors Call and related argument structures to remove their
dependency on `Expression::span` which will be removed in the future.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Should be none. If you see some error messages that look broken, please
report.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Provides the ability to use http commands as part of a pipeline.
Additionally, this pull requests extends the pipeline metadata to add a
content_type field. The content_type metadata field allows commands such
as `to json` to set the metadata in the pipeline allowing the http
commands to use it when making requests.
This pull request also introduces the ability to directly stream http
requests from streaming pipelines.
One other small change is that Content-Type will always be set if it is
passed in to the http commands, either indirectly or throw the content
type flag. Previously it was not preserved with requests that were not
of type json or form data.
# User-Facing Changes
* `http post`, `http put`, `http patch`, `http delete` can be used as
part of a pipeline
* `to text`, `to json`, `from json` all set the content_type metadata
field and the http commands will utilize them when making requests.
# Description
Mostly fixes#13149 with much of the credit to @fdncred.
This PR runs `table --expand` against `help` example results. This is
essentially the same fix that #13146 was for `std help`.
It also changes the shape of the result for the `table --expand`
example, as it was hardcoded wrong.
~Still needed is a fix for the `table --collapse` example.~ Note that
this is also still a bug in `std help` that I didn't noticed before.
# User-Facing Changes
Certain tables are now rendered correctly in the help examples for:
* `table`
* `zip`
* `flatten`
* And almost certainly others
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR allows byte streams to optionally be colored as being
specifically binary or string data, which guarantees that they'll be
converted to `Binary` or `String` appropriately on `into_value()`,
making them compatible with `Type` guarantees. This makes them
significantly more broadly usable for command input and output.
There is still an `Unknown` type for byte streams coming from external
commands, which uses the same behavior as we previously did where it's a
string if it's UTF-8.
A small number of commands were updated to take advantage of this, just
to prove the point. I will be adding more after this merges.
# User-Facing Changes
- New types in `describe`: `string (stream)`, `binary (stream)`
- These commands now return a stream if their input was a stream:
- `into binary`
- `into string`
- `bytes collect`
- `str join`
- `first` (binary)
- `last` (binary)
- `take` (binary)
- `skip` (binary)
- Streams that are explicitly binary colored will print as a streaming
hexdump
- example:
```nushell
1.. | each { into binary } | bytes collect
```
# Tests + Formatting
I've added some tests to cover it at a basic level, and it doesn't break
anything existing, but I do think more would be nice. Some of those will
come when I modify more commands to stream.
# After Submitting
There are a few things I'm not quite satisfied with:
- **String trimming behavior.** We automatically trim newlines from
streams from external commands, but I don't think we should do this with
internal commands. If I call a command that happens to turn my string
into a stream, I don't want the newline to suddenly disappear. I changed
this to specifically do it only on `Child` and `File`, but I don't know
if this is quite right, and maybe we should bring back the old flag for
`trim_end_newline`
- **Known binary always resulting in a hexdump.** It would be nice to
have a `print --raw`, so that we can put binary data on stdout
explicitly if we want to. This PR doesn't change how external commands
work though - they still dump straight to stdout.
Otherwise, here's the normal checklist:
- [ ] release notes
- [ ] docs update for plugin protocol changes (added `type` field)
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
This PR introduces a `ByteStream` type which is a `Read`-able stream of
bytes. Internally, it has an enum over three different byte stream
sources:
```rust
pub enum ByteStreamSource {
Read(Box<dyn Read + Send + 'static>),
File(File),
Child(ChildProcess),
}
```
This is in comparison to the current `RawStream` type, which is an
`Iterator<Item = Vec<u8>>` and has to allocate for each read chunk.
Currently, `PipelineData::ExternalStream` serves a weird dual role where
it is either external command output or a wrapper around `RawStream`.
`ByteStream` makes this distinction more clear (via `ByteStreamSource`)
and replaces `PipelineData::ExternalStream` in this PR:
```rust
pub enum PipelineData {
Empty,
Value(Value, Option<PipelineMetadata>),
ListStream(ListStream, Option<PipelineMetadata>),
ByteStream(ByteStream, Option<PipelineMetadata>),
}
```
The PR is relatively large, but a decent amount of it is just repetitive
changes.
This PR fixes#7017, fixes#10763, and fixes#12369.
This PR also improves performance when piping external commands. Nushell
should, in most cases, have competitive pipeline throughput compared to,
e.g., bash.
| Command | Before (MB/s) | After (MB/s) | Bash (MB/s) |
| -------------------------------------------------- | -------------:|
------------:| -----------:|
| `throughput \| rg 'x'` | 3059 | 3744 | 3739 |
| `throughput \| nu --testbin relay o> /dev/null` | 3508 | 8087 | 8136 |
# User-Facing Changes
- This is a breaking change for the plugin communication protocol,
because the `ExternalStreamInfo` was replaced with `ByteStreamInfo`.
Plugins now only have to deal with a single input stream, as opposed to
the previous three streams: stdout, stderr, and exit code.
- The output of `describe` has been changed for external/byte streams.
- Temporary breaking change: `bytes starts-with` no longer works with
byte streams. This is to keep the PR smaller, and `bytes ends-with`
already does not work on byte streams.
- If a process core dumped, then instead of having a `Value::Error` in
the `exit_code` column of the output returned from `complete`, it now is
a `Value::Int` with the negation of the signal number.
# After Submitting
- Update docs and book as necessary
- Release notes (e.g., plugin protocol changes)
- Adapt/convert commands to work with byte streams (high priority is
`str length`, `bytes starts-with`, and maybe `bytes ends-with`).
- Refactor the `tee` code, Devyn has already done some work on this.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
# Description
Does some misc changes to `ListStream`:
- Moves it into its own module/file separate from `RawStream`.
- `ListStream`s now have an associated `Span`.
- This required changes to `ListStreamInfo` in `nu-plugin`. Note sure if
this is a breaking change for the plugin protocol.
- Hides the internals of `ListStream` but also adds a few more methods.
- This includes two functions to more easily alter a stream (these take
a `ListStream` and return a `ListStream` instead of having to go through
the whole `into_pipeline_data(..)` route).
- `map`: takes a `FnMut(Value) -> Value`
- `modify`: takes a function to modify the inner stream.
# Description
Removes lazy records from the language, following from the reasons
outlined in #12622. Namely, this should make semantics more clear and
will eliminate concerns regarding maintainability.
# User-Facing Changes
- Breaking change: `lazy make` is removed.
- Breaking change: `describe --collect-lazyrecords` flag is removed.
- `sys` and `debug info` now return regular records.
# After Submitting
- Update nushell book if necessary.
- Explore new `sys` and `debug info` APIs to prevent them from taking
too long (e.g., subcommands or taking an optional column/cell-path
argument).
# Description
This PR overhauls the shell_integration system by allowing individual
control over which ansi escape sequences are used. As we continue to
broaden our support for more ansi escape sequences, we can't really have
an all-or-nothing strategy. Some ansi escapes cause problems in certain
operating systems or terminals. We should allow the user to choose which
escapes they want.
TODO:
* Gather feedback
* Should osc7, osc9_9 and osc633p be mutually exclusive?
* Is the naming convention for these settings too nerdy osc2, osc7, etc?
closes#11301
# User-Facing Changes
shell_integration is no longer a boolean value. This is what is
supported in the default_config.nu
```nushell
shell_integration: {
# osc2 abbreviates the path if in the home_dir, sets the tab/window title, shows the running command in the tab/window title
osc2: true
# osc7 is a way to communicate the path to the terminal, this is helpful for spawning new tabs in the same directory
osc7: true
# osc8 is also implemented as the deprecated setting ls.show_clickable_links, it shows clickable links in ls output if your terminal supports it
osc8: true
# osc9_9 is from ConEmu and is starting to get wider support. It's similar to osc7 in that it communicates the path to the terminal
osc9_9: false
# osc133 is several escapes invented by Final Term which include the supported ones below.
# 133;A - Mark prompt start
# 133;B - Mark prompt end
# 133;C - Mark pre-execution
# 133;D;exit - Mark execution finished with exit code
# This is used to enable terminals to know where the prompt is, the command is, where the command finishes, and where the output of the command is
osc133: true
# osc633 is closely related to osc133 but only exists in visual studio code (vscode) and supports their shell integration features
# 633;A - Mark prompt start
# 633;B - Mark prompt end
# 633;C - Mark pre-execution
# 633;D;exit - Mark execution finished with exit code
# 633;E - NOT IMPLEMENTED - Explicitly set the command line with an optional nonce
# 633;P;Cwd=<path> - Mark the current working directory and communicate it to the terminal
# and also helps with the run recent menu in vscode
osc633: true
# reset_application_mode is escape \x1b[?1l and was added to help ssh work better
reset_application_mode: true
}
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Resolves#12654.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`grid` can now throw an error.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added relevant test.
# Description
Continuing from #12568, this PR further reduces the size of `Expr` from
64 to 40 bytes. It also reduces `Expression` from 128 to 96 bytes and
`Type` from 32 to 24 bytes.
This was accomplished by:
- for `Expr` with multiple fields (e.g., `Expr::Thing(A, B, C)`),
merging the fields into new AST struct types and then boxing this struct
(e.g. `Expr::Thing(Box<ABC>)`).
- replacing `Vec<T>` with `Box<[T]>` in multiple places. `Expr`s and
`Expression`s should rarely be mutated, if at all, so this optimization
makes sense.
By reducing the size of these types, I didn't notice a large performance
improvement (at least compared to #12568). But this PR does reduce the
memory usage of nushell. My config is somewhat light so I only noticed a
difference of 1.4MiB (38.9MiB vs 37.5MiB).
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
This adds a `SharedCow` type as a transparent copy-on-write pointer that
clones to unique on mutate.
As an initial test, the `Record` within `Value::Record` is shared.
There are some pretty big wins for performance. I'll post benchmark
results in a comment. The biggest winner is nested access, as that would
have cloned the records for each cell path follow before and it doesn't
have to anymore.
The reusability of the `SharedCow` type is nice and I think it could be
used to clean up the previous work I did with `Arc` in `EngineState`.
It's meant to be a mostly transparent clone-on-write that just clones on
`.to_mut()` or `.into_owned()` if there are actually multiple
references, but avoids cloning if the reference is unique.
# User-Facing Changes
- `Value::Record` field is a different type (plugin authors)
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] use for `EngineState`
- [ ] use for `Value::List`
# Description
Currently, `Range` is a struct with a `from`, `to`, and `incr` field,
which are all type `Value`. This PR changes `Range` to be an enum over
`IntRange` and `FloatRange` for better type safety / stronger compile
time guarantees.
Fixes: #11778Fixes: #11777Fixes: #11776Fixes: #11775Fixes: #11774Fixes: #11773Fixes: #11769.
# User-Facing Changes
Hopefully none, besides bug fixes.
Although, the `serde` representation might have changed.
# Description
The second `Value` is redundant and will consume five extra bytes on
each transmission of a custom value to/from a plugin.
# User-Facing Changes
This is a breaking change to the plugin protocol.
The [example in the protocol
reference](https://www.nushell.sh/contributor-book/plugin_protocol_reference.html#value)
becomes
```json
{
"Custom": {
"val": {
"type": "PluginCustomValue",
"name": "database",
"data": [36, 190, 127, 40, 12, 3, 46, 83],
"notify_on_drop": true
},
"span": {
"start": 320,
"end": 340
}
}
}
```
instead of
```json
{
"CustomValue": {
...
}
}
```
# After Submitting
Update plugin protocol reference
# Description
When implementing a `Command`, one must also import all the types
present in the function signatures for `Command`. This makes it so that
we often import the same set of types in each command implementation
file. E.g., something like this:
```rust
use nu_protocol::ast::Call;
use nu_protocol::engine::{Command, EngineState, Stack};
use nu_protocol::{
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, PipelineData,
ShellError, Signature, Span, Type, Value,
};
```
This PR adds the `nu_engine::command_prelude` module which contains the
necessary and commonly used types to implement a `Command`:
```rust
// command_prelude.rs
pub use crate::CallExt;
pub use nu_protocol::{
ast::{Call, CellPath},
engine::{Command, EngineState, Stack},
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, IntoSpanned,
PipelineData, Record, ShellError, Signature, Span, Spanned, SyntaxShape, Type, Value,
};
```
This should reduce the boilerplate needed to implement a command and
also gives us a place to track the breadth of the `Command` API. I tried
to be conservative with what went into the prelude modules, since it
might be hard/annoying to remove items from the prelude in the future.
Let me know if something should be included or excluded.
# Description
Binary values passed to `table` may or may not be pretty formatted based
on the output destination. This leads to weird behavior as documented in
#12287. This PR changes `table` to always pretty print binary values.
However, binary values passed to external commands will not be formatted
(this is the existing behavior).
# User-Facing Changes
This is a breaking change. E.g.:
```nushell
0x[8989] | table | cat -
```
used to print raw bytes, but it will now print the pretty formatted
bytes.
# After Submitting
Add to 0.92.0 release notes and update documentation.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Boxes `Record` inside `Value` to reduce memory usage, `Value` goes from
`72` -> `56` bytes after this change.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The PR overhauls how IO redirection is handled, allowing more explicit
and fine-grain control over `stdout` and `stderr` output as well as more
efficient IO and piping.
To summarize the changes in this PR:
- Added a new `IoStream` type to indicate the intended destination for a
pipeline element's `stdout` and `stderr`.
- The `stdout` and `stderr` `IoStream`s are stored in the `Stack` and to
avoid adding 6 additional arguments to every eval function and
`Command::run`. The `stdout` and `stderr` streams can be temporarily
overwritten through functions on `Stack` and these functions will return
a guard that restores the original `stdout` and `stderr` when dropped.
- In the AST, redirections are now directly part of a `PipelineElement`
as a `Option<Redirection>` field instead of having multiple different
`PipelineElement` enum variants for each kind of redirection. This
required changes to the parser, mainly in `lite_parser.rs`.
- `Command`s can also set a `IoStream` override/redirection which will
apply to the previous command in the pipeline. This is used, for
example, in `ignore` to allow the previous external command to have its
stdout redirected to `Stdio::null()` at spawn time. In contrast, the
current implementation has to create an os pipe and manually consume the
output on nushell's side. File and pipe redirections (`o>`, `e>`, `e>|`,
etc.) have precedence over overrides from commands.
This PR improves piping and IO speed, partially addressing #10763. Using
the `throughput` command from that issue, this PR gives the following
speedup on my setup for the commands below:
| Command | Before (MB/s) | After (MB/s) | Bash (MB/s) |
| --------------------------- | -------------:| ------------:|
-----------:|
| `throughput o> /dev/null` | 1169 | 52938 | 54305 |
| `throughput \| ignore` | 840 | 55438 | N/A |
| `throughput \| null` | Error | 53617 | N/A |
| `throughput \| rg 'x'` | 1165 | 3049 | 3736 |
| `(throughput) \| rg 'x'` | 810 | 3085 | 3815 |
(Numbers above are the median samples for throughput)
This PR also paves the way to refactor our `ExternalStream` handling in
the various commands. For example, this PR already fixes the following
code:
```nushell
^sh -c 'echo -n "hello "; sleep 0; echo "world"' | find "hello world"
```
This returns an empty list on 0.90.1 and returns a highlighted "hello
world" on this PR.
Since the `stdout` and `stderr` `IoStream`s are available to commands
when they are run, then this unlocks the potential for more convenient
behavior. E.g., the `find` command can disable its ansi highlighting if
it detects that the output `IoStream` is not the terminal. Knowing the
output streams will also allow background job output to be redirected
more easily and efficiently.
# User-Facing Changes
- External commands returned from closures will be collected (in most
cases):
```nushell
1..2 | each {|_| nu -c "print a" }
```
This gives `["a", "a"]` on this PR, whereas this used to print "a\na\n"
and then return an empty list.
```nushell
1..2 | each {|_| nu -c "print -e a" }
```
This gives `["", ""]` and prints "a\na\n" to stderr, whereas this used
to return an empty list and print "a\na\n" to stderr.
- Trailing new lines are always trimmed for external commands when
piping into internal commands or collecting it as a value. (Failure to
decode the output as utf-8 will keep the trailing newline for the last
binary value.) In the current nushell version, the following three code
snippets differ only in parenthesis placement, but they all also have
different outputs:
1. `1..2 | each { ^echo a }`
```
a
a
╭────────────╮
│ empty list │
╰────────────╯
```
2. `1..2 | each { (^echo a) }`
```
╭───┬───╮
│ 0 │ a │
│ 1 │ a │
╰───┴───╯
```
3. `1..2 | (each { ^echo a })`
```
╭───┬───╮
│ 0 │ a │
│ │ │
│ 1 │ a │
│ │ │
╰───┴───╯
```
But in this PR, the above snippets will all have the same output:
```
╭───┬───╮
│ 0 │ a │
│ 1 │ a │
╰───┴───╯
```
- All existing flags on `run-external` are now deprecated.
- File redirections now apply to all commands inside a code block:
```nushell
(nu -c "print -e a"; nu -c "print -e b") e> test.out
```
This gives "a\nb\n" in `test.out` and prints nothing. The same result
would happen when printing to stdout and using a `o>` file redirection.
- External command output will (almost) never be ignored, and ignoring
output must be explicit now:
```nushell
(^echo a; ^echo b)
```
This prints "a\nb\n", whereas this used to print only "b\n". This only
applies to external commands; values and internal commands not in return
position will not print anything (e.g., `(echo a; echo b)` still only
prints "b").
- `complete` now always captures stderr (`do` is not necessary).
# After Submitting
The language guide and other documentation will need to be updated.
# Description
Fixes some ignored clippy lints.
# User-Facing Changes
Changes some signatures and return types to `&dyn Command` instead of
`&Box<dyn Command`, but I believe this is only an internal change.
Hi there;
Sorry took that long to respond.
I guess it's good?
It will consume the whole stream whether possible.
I do believe it will be faster in WSL in general too (in a sense of
whole buffer output), but its interesting issue probably needed to be
separated. It was not very well explained as well.
```nushell
> 0..2000 | table -a 2
╭───┬──────╮
│ 0 │ 0 │
│ 1 │ 1 │
│ 2 │ ... │
│ 3 │ 1999 │
│ 4 │ 2000 │
╰───┴──────╯
```
Take care
fix: #11845
cc: @fdncred
# Description
This PR renames the conversion functions on `Value` to be more consistent.
It follows the Rust [API guidelines](https://rust-lang.github.io/api-guidelines/naming.html#ad-hoc-conversions-follow-as_-to_-into_-conventions-c-conv) for ad-hoc conversions.
The conversion functions on `Value` now come in a few forms:
- `coerce_{type}` takes a `&Value` and attempts to convert the value to
`type` (e.g., `i64` are converted to `f64`). This is the old behavior of
some of the `as_{type}` functions -- these functions have simply been
renamed to better reflect what they do.
- The new `as_{type}` functions take a `&Value` and returns an `Ok`
result only if the value is of `type` (no conversion is attempted). The
returned value will be borrowed if `type` is non-`Copy`, otherwise an
owned value is returned.
- `into_{type}` exists for non-`Copy` types, but otherwise does not
attempt conversion just like `as_type`. It takes an owned `Value` and
always returns an owned result.
- `coerce_into_{type}` has the same relationship with `coerce_{type}` as
`into_{type}` does with `as_{type}`.
- `to_{kind}_string`: conversion to different string formats (debug,
abbreviated, etc.). Only two of the old string conversion functions were
removed, the rest have been renamed only.
- `to_{type}`: other conversion functions. Currently, only `to_path`
exists. (And `to_string` through `Display`.)
This table summaries the above:
| Form | Cost | Input Ownership | Output Ownership | Converts `Value`
case/`type` |
| ---------------------------- | ----- | --------------- |
---------------- | -------- |
| `as_{type}` | Cheap | Borrowed | Borrowed/Owned | No |
| `into_{type}` | Cheap | Owned | Owned | No |
| `coerce_{type}` | Cheap | Borrowed | Borrowed/Owned | Yes |
| `coerce_into_{type}` | Cheap | Owned | Owned | Yes |
| `to_{kind}_string` | Expensive | Borrowed | Owned | Yes |
| `to_{type}` | Expensive | Borrowed | Owned | Yes |
# User-Facing Changes
Breaking API change for `Value` in `nu-protocol` which is exposed as
part of the plugin API.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`ls` and other file completions uses `LS_COLORS`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
1. Make table to be a subtype of `list<any>`, so some input_output_types
of filter commands are unnecessary
2. Change some commands which accept an input type, but generates
different output types. In this case, delete duplicate entry, and change
relative output type to `<any>`
Yeah it makes some commands more permissive, but I think it's better to
run into strange issue that why my script runs to failed during parse
time.
Fixes #11193
# User-Facing Changes
NaN
# Tests + Formatting
NaN
# After Submitting
NaN
# Description
Replace `.to_string()` used in `GenericError` with `.into()` as
`.into()` seems more popular
Replace `Vec::new()` used in `GenericError` with `vec![]` as `vec![]`
seems more popular
(There are so, so many)
# Description
@sholderbach pointed out some places that I could help improve the code
in the table command changes. This PR tries to implement those.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Correct an example that had old syntax.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes a minor bug that prevented this command from running.
```nushell
table --list | each {|r| print ($r); print (ls | first 3 | table --theme $r)}
```
Here's the output now of the first few themes.
It prevented it from running because "default" wasn't a real table
theme. Now "default" is a synonym of rounded.
Also tweaked the error message when a bad theme name is provided.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR just tweaks the `table` example text and some parameter text.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is pretty complementary/orthogonal to @IanManske 's changes to
`Value` cellpath accessors in:
- #10925
- to a lesser extent #10926
## Steps
- Use `R.remove` in `Value.remove_data_at_cell_path`
- Pretty sound after #10875 (tests mentioned in commit message have been
removed by that)
- Update `did_you_mean` helper to use iterator
- Change `Value::columns` to return iterator
- This is not a place of honor
- Use `Record::get` in `Value::get_data_by_key`
# User-Facing Changes
None intentional, potential edge cases on duplicated columns could
change (considered undefined behavior)
# Tests + Formatting
(-)
# Description
Where appropriate, this PR replaces instances of
`Value::get_data_by_key` and `Value::follow_cell_path` with
`Record::get`. This avoids some unnecessary clones and simplifies the
code in some places.
# Description
- Simplify `table` record highlight with `.get_mut`
- pretty straight forward
- Use record iterators in `table` abbreviation logic
- This required some rework if we go from guaranted contiguous arrays to
iterators
- Refactor `nu-table` internals to new record API
# User-Facing Changes
None intened
# Tests + Formatting
(-)
# Description
Use `record!` macro instead of defining two separate `vec!` for `cols`
and `vals` when appropriate.
This visually aligns the key with the value.
Further more you don't have to deal with the construction of `Record {
cols, vals }` so we can hide the implementation details in the future.
## State
Not covering all possible commands yet, also some tests/examples are
better expressed by creating cols and vals separately.
# User/Developer-Facing Changes
The examples and tests should read more natural. No relevant functional
change
# Bycatch
Where I noticed it I replaced usage of `Value` constructors with
`Span::test_data()` or `Span::unknown()` to the `Value::test_...`
constructors. This should make things more readable and also simplify
changes to the `Span` system in the future.
Reverts nushell/nushell#10596
Using the long option in examples is going to be confusing as it makes
the reader think the long option is required. It also isn't idiomatic
Nushell.
The examples should be copy-paste-able as idiomatic Nushell, so as such
we shouldn't expand them to the long flag name.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Long options are preferable over short ones for documentation.
This PR ports some command examples to exclusively use long options.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
✅
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds a few more grid icons and updates some existing ones.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
As part of the refactor to split spans off of Value, this moves to using
helper functions to create values, and using `.span()` instead of
matching span out of Value directly.
Hoping to get a few more helping hands to finish this, as there are a
lot of commands to update :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <windsoilder@outlook.com>
# Description
This PR tries to remove ~atty~ is-terminal from the entire code base,
since ~[atty is
unmaintained](https://rustsec.org/advisories/RUSTSEC-2021-0145) and~
[`is_terminal` has been
stabilized](https://blog.rust-lang.org/2023/06/01/Rust-1.70.0.html#isterminal)
in rust 1.70.0.
cc @fdncred
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
