Came from [this
discussion](https://discord.com/channels/601130461678272522/1348791953784836147/1349699872059691038)
on discord with @fdncred
# Description
Small refactoring where I rename commands from "SubCommand" to its
proper name. Motivations: better clarity (although subjective), better
searchable, consistency.
The only commands I didn't touch were "split list" and "ansi gradient"
because of name clashes.
# User-Facing Changes
None
# Tests + Formatting
cargo fmt and clippy OK
# After Submitting
nothing required
# Description
Pre-cratification of `nu-command` we added tests that covered the whole
command set to ensure consistent documentation style choices and that
the search terms which are added are not uselessly redundant. These
tests are now moved into the suite of the main binary to truly cover all
commands.
- **Move parser quickcheck "fuzz" to `nu-cmd-lang`**
- **Factor out creation of full engine state for tests**
- **Move all-command tests to main context creation**
- **Fix all descriptions**
- **Fix search term duplicate**
# User-Facing Changes
As a result I had to fix a few command argument descriptions. (Doesn't
mean I fully stand behind this choice, but) positionals
(rest/required/optional) and top level descriptions should start with a
capital letter and end with a period. This is not enforced for flags.
# Tests + Formatting
Furthermore I moved our poor-peoples-fuzzer that runs in CI with
`quicktest` over the parser to `nu-cmd-lang` reducing its command set to
just the keywords (similar to
https://github.com/nushell/nushell/pull/15036). Thus this should also
run slightly faster (maybe a slight parallel build cost due to earlier
dependency on quicktest)
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
This PR introduces a new `Signals` struct to replace our adhoc passing
around of `ctrlc: Option<Arc<AtomicBool>>`. Doing so has a few benefits:
- We can better enforce when/where resetting or triggering an interrupt
is allowed.
- Consolidates `nu_utils::ctrl_c::was_pressed` and other ad-hoc
re-implementations into a single place: `Signals::check`.
- This allows us to add other types of signals later if we want. E.g.,
exiting or suspension.
- Similarly, we can more easily change the underlying implementation if
we need to in the future.
- Places that used to have a `ctrlc` of `None` now use
`Signals::empty()`, so we can double check these usages for correctness
in the future.
# Description
Changes `get_full_help` to take a `&dyn Command` instead of multiple
arguments (`&Signature`, `&Examples` `is_parser_keyword`). All of these
arguments can be gathered from a `Command`, so there is no need to pass
the pieces to `get_full_help`.
This PR also fixes an issue where the search terms are not shown if
`--help` is used on a command.
# Description
Kind of a vague title, but this PR does two main things:
1. Rather than overriding functions like `Command::is_parser_keyword`,
this PR instead changes commands to override `Command::command_type`.
The `CommandType` returned by `Command::command_type` is then used to
automatically determine whether `Command::is_parser_keyword` and the
other `is_{type}` functions should return true. These changes allow us
to remove the `CommandType::Other` case and should also guarantee than
only one of the `is_{type}` functions on `Command` will return true.
2. Uses the new, reworked `Command::command_type` function in the `scope
commands` and `which` commands.
# User-Facing Changes
- Breaking change for `scope commands`: multiple columns (`is_builtin`,
`is_keyword`, `is_plugin`, etc.) have been merged into the `type`
column.
- Breaking change: the `which` command can now report `plugin` or
`keyword` instead of `built-in` in the `type` column. It may also now
report `external` instead of `custom` in the `type` column for known
`extern`s.
# Description
Continuing from #12568, this PR further reduces the size of `Expr` from
64 to 40 bytes. It also reduces `Expression` from 128 to 96 bytes and
`Type` from 32 to 24 bytes.
This was accomplished by:
- for `Expr` with multiple fields (e.g., `Expr::Thing(A, B, C)`),
merging the fields into new AST struct types and then boxing this struct
(e.g. `Expr::Thing(Box<ABC>)`).
- replacing `Vec<T>` with `Box<[T]>` in multiple places. `Expr`s and
`Expression`s should rarely be mutated, if at all, so this optimization
makes sense.
By reducing the size of these types, I didn't notice a large performance
improvement (at least compared to #12568). But this PR does reduce the
memory usage of nushell. My config is somewhat light so I only noticed a
difference of 1.4MiB (38.9MiB vs 37.5MiB).
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
When implementing a `Command`, one must also import all the types
present in the function signatures for `Command`. This makes it so that
we often import the same set of types in each command implementation
file. E.g., something like this:
```rust
use nu_protocol::ast::Call;
use nu_protocol::engine::{Command, EngineState, Stack};
use nu_protocol::{
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, PipelineData,
ShellError, Signature, Span, Type, Value,
};
```
This PR adds the `nu_engine::command_prelude` module which contains the
necessary and commonly used types to implement a `Command`:
```rust
// command_prelude.rs
pub use crate::CallExt;
pub use nu_protocol::{
ast::{Call, CellPath},
engine::{Command, EngineState, Stack},
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, IntoSpanned,
PipelineData, Record, ShellError, Signature, Span, Spanned, SyntaxShape, Type, Value,
};
```
This should reduce the boilerplate needed to implement a command and
also gives us a place to track the breadth of the `Command` API. I tried
to be conservative with what went into the prelude modules, since it
might be hard/annoying to remove items from the prelude in the future.
Let me know if something should be included or excluded.
# Description
Use `record!` macro instead of defining two separate `vec!` for `cols`
and `vals` when appropriate.
This visually aligns the key with the value.
Further more you don't have to deal with the construction of `Record {
cols, vals }` so we can hide the implementation details in the future.
## State
Not covering all possible commands yet, also some tests/examples are
better expressed by creating cols and vals separately.
# User/Developer-Facing Changes
The examples and tests should read more natural. No relevant functional
change
# Bycatch
Where I noticed it I replaced usage of `Value` constructors with
`Span::test_data()` or `Span::unknown()` to the `Value::test_...`
constructors. This should make things more readable and also simplify
changes to the `Span` system in the future.
Re-fixes #3674, if that is seen as desirable to do.
# Description
This PR changes the implementation of the `--features=extra` string
casing commands from Inflector to `heck`, as in PR #4081. This PR landed
a long time ago, but somewhere along the way (i can't find it) the
implementation ended up being switched back to Inflector.
# User-Facing Changes
Inflector and `heck` implement casing differently, so all of the
commands have different behavior around edge cases (consecutive
capitals, interspersed numbers and letters, etc)
### Before
```nu
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str camel-case
╭───┬───────────╮
│ 0 │ userID │
│ 1 │ abcdefGHI │
│ 2 │ foo123Bar │
╰───┴───────────╯
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str snake-case
╭───┬─────────────╮
│ 0 │ user_id │
│ 1 │ ab_cdef_ghi │
│ 2 │ foo_12_3bar │
╰───┴─────────────╯
```
### After
```nu
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str camel-case
╭───┬───────────╮
│ 0 │ userId │
│ 1 │ abCdefGhi │
│ 2 │ foo123bar │
╰───┴───────────╯
G:/Dev/nu-itself/nushell> [UserID ABCdefGHI foo123bar] | str snake-case
╭───┬─────────────╮
│ 0 │ user_id │
│ 1 │ ab_cdef_ghi │
│ 2 │ foo123bar │
╰───┴─────────────╯
```
# Tests + Formatting
The existing string casing tests pass... because none of them relied on
any of these edge cases
# Description
As part of the refactor to split spans off of Value, this moves to using
helper functions to create values, and using `.span()` instead of
matching span out of Value directly.
Hoping to get a few more helping hands to finish this, as there are a
lot of commands to update :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <windsoilder@outlook.com>
# Description
This doesn't really do much that the user could see, but it helps get us
ready to do the steps of the refactor to split the span off of Value, so
that values can be spanless. This allows us to have top-level values
that can hold both a Value and a Span, without requiring that all values
have them.
We expect to see significant memory reduction by removing so many
unnecessary spans from values. For example, a table of 100,000 rows and
5 columns would have a savings of ~8megs in just spans that are almost
always duplicated.
# User-Facing Changes
Nothing yet
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR creates a new `Record` type to reduce duplicate code and
possibly bugs as well. (This is an edited version of #9648.)
- `Record` implements `FromIterator` and `IntoIterator` and so can be
iterated over or collected into. For example, this helps with
conversions to and from (hash)maps. (Also, no more
`cols.iter().zip(vals)`!)
- `Record` has a `push(col, val)` function to help insure that the
number of columns is equal to the number of values. I caught a few
potential bugs thanks to this (e.g. in the `ls` command).
- Finally, this PR also adds a `record!` macro that helps simplify
record creation. It is used like so:
```rust
record! {
"key1" => some_value,
"key2" => Value::string("text", span),
"key3" => Value::int(optional_int.unwrap_or(0), span),
"key4" => Value::bool(config.setting, span),
}
```
Since macros hinder formatting, etc., the right hand side values should
be relatively short and sweet like the examples above.
Where possible, prefer `record!` or `.collect()` on an iterator instead
of multiple `Record::push`s, since the first two automatically set the
record capacity and do less work overall.
# User-Facing Changes
Besides the changes in `nu-protocol` the only other breaking changes are
to `nu-table::{ExpandedTable::build_map, JustTable::kv_table}`.
I am moving the following str case commands to nu-cmd-extra (as
discussed in the core team meeting the other day)
* camel-case
* kebab-case
* pascal-case
* screaming-snake-case
* snake-case
* title-case
