* Moves off of draining between filters. Instead, the sink will pull on the stream, and will drain element-wise. This moves the whole stream to being lazy.
* Adds ctrl-c support and connects it into some of the key points where we pull on the stream. If a ctrl-c is detect, we immediately halt pulling on the stream and return to the prompt.
* Moves away from having a SourceMap where anchor locations are stored. Now AnchorLocation is kept directly in the Tag.
* To make this possible, split tag and span. Span is largely used in the parser and is copyable. Tag is now no longer copyable.
This commit replaces the previous naive coloring system with a coloring
system that is more aligned with the parser.
The main benefit of this change is that it allows us to use parsing
rules to decide how to color tokens.
For example, consider the following syntax:
```
$ ps | where cpu > 10
```
Ideally, we could color `cpu` like a column name and not a string,
because `cpu > 10` is a shorthand block syntax that expands to
`{ $it.cpu > 10 }`.
The way that we know that it's a shorthand block is that the `where`
command declares that its first parameter is a `SyntaxShape::Block`,
which allows the shorthand block form.
In order to accomplish this, we need to color the tokens in a way that
corresponds to their expanded semantics, which means that high-fidelity
coloring requires expansion.
This commit adds a `ColorSyntax` trait that corresponds to the
`ExpandExpression` trait. The semantics are fairly similar, with a few
differences.
First `ExpandExpression` consumes N tokens and returns a single
`hir::Expression`. `ColorSyntax` consumes N tokens and writes M
`FlatShape` tokens to the output.
Concretely, for syntax like `[1 2 3]`
- `ExpandExpression` takes a single token node and produces a single
`hir::Expression`
- `ColorSyntax` takes the same token node and emits 7 `FlatShape`s
(open delimiter, int, whitespace, int, whitespace, int, close
delimiter)
Second, `ColorSyntax` is more willing to plow through failures than
`ExpandExpression`.
In particular, consider syntax like
```
$ ps | where cpu >
```
In this case
- `ExpandExpression` will see that the `where` command is expecting a
block, see that it's not a literal block and try to parse it as a
shorthand block. It will successfully find a member followed by an
infix operator, but not a following expression. That means that the
entire pipeline part fails to parse and is a syntax error.
- `ColorSyntax` will also try to parse it as a shorthand block and
ultimately fail, but it will fall back to "backoff coloring mode",
which parsing any unidentified tokens in an unfallible, simple way. In
this case, `cpu` will color as a string and `>` will color as an
operator.
Finally, it's very important that coloring a pipeline infallibly colors
the entire string, doesn't fail, and doesn't get stuck in an infinite
loop.
In order to accomplish this, this PR separates `ColorSyntax`, which is
infallible from `FallibleColorSyntax`, which might fail. This allows the
type system to let us know if our coloring rules bottom out at at an
infallible rule.
It's not perfect: it's still possible for the coloring process to get
stuck or consume tokens non-atomically. I intend to reduce the
opportunity for those problems in a future commit. In the meantime, the
current system catches a number of mistakes (like trying to use a
fallible coloring rule in a loop without thinking about the possibility
that it will never terminate).
This commit migrates Value's numeric types to BigInt and BigDecimal. The
basic idea is that overflow errors aren't great in a shell environment,
and not really necessary.
The main immediate consequence is that new errors can occur when
serializing Nu values to other formats. You can see this in changes to
the various serialization formats (JSON, TOML, etc.). There's a new
`CoerceInto` trait that uses the `ToPrimitive` trait from `num_traits`
to attempt to coerce a `BigNum` or `BigDecimal` into a target type, and
produces a `RangeError` (kind of `ShellError`) if the coercion fails.
Another possible future consequence is that certain performance-critical
numeric operations might be too slow. If that happens, we can introduce
specialized numeric types to help improve the performance of those
situations, based on the real-world experience.
with the `help` command to explore and list all commands available.
Enter will also try to see if the location to be entered is an existing
Nu command, if it is it will let you inspect the command under `help`.
This provides baseline needed so we can iterate on it.
This commit is more substantial than it looks: there was basically no
real support for decimals before, and that impacted values all the way
through.
I also made Size contain a decimal instead of an integer (`1.6kb` is a
reasonable thing to type), which impacted a bunch of code.
The biggest impact of this commit is that it creates many more possible
ways for valid nu types to fail to serialize as toml, json, etc. which
typically can't support the full range of Decimal (or Bigint, which I
also think we should support). This commit makes to-toml fallible, and a
similar effort is necessary for the rest of the serializations.
We also need to figure out how to clearly communicate to users what has
happened, but failing to serialize to toml seems clearly superior to me
than weird errors in basic math operations.
The original intent of this patch was to remove more unwraps to reduce
panics. I then lost a ton of time to the fact that the playground isn't
in a temp directory (because of permissions issues on Windows).
This commit improves the test facilities to:
- use a tempdir for the playground
- change the playground API so you instantiate it with a block that
encloses the lifetime of the tempdir
- the block is called with a `dirs` argument that has `dirs.test()` and
other important directories that we were computing by hand all the time
- the block is also called with a `playground` argument that you can use
to construct files (it's the same `Playground` as before)
- change the nu! and nu_error! macros to produce output instead of
taking a variable binding
- change the nu! and nu_error! macros to do the cwd() transformation
internally
- change the nu! and nu_error! macros to take varargs at the end that
get interpolated into the running command
I didn't manage to finish porting all of the tests, so a bunch of tests
are currently commented out. That will need to change before we land
this patch.
This ended up being a bit of a yak shave. The basic idea in this commit is to
expand `~` in paths, but only in paths.
The way this is accomplished is by doing the expansion inside of the code that
parses literal syntax for `SyntaxType::Path`.
As a quick refresher: every command is entitled to expand its arguments in a
custom way. While this could in theory be used for general-purpose macros,
today the expansion facility is limited to syntactic hints.
For example, the syntax `where cpu > 0` expands under the hood to
`where { $it.cpu > 0 }`. This happens because the first argument to `where`
is defined as a `SyntaxType::Block`, and the parser coerces binary expressions
whose left-hand-side looks like a member into a block when the command is
expecting one.
This is mildly more magical than what most programming languages would do,
but we believe that it makes sense to allow commands to fine-tune the syntax
because of the domain nushell is in (command-line shells).
The syntactic expansions supported by this facility are relatively limited.
For example, we don't allow `$it` to become a bare word, simply because the
command asks for a string in the relevant position. That would quickly
become more confusing than it's worth.
This PR adds a new `SyntaxType` rule: `SyntaxType::Path`. When a command
declares a parameter as a `SyntaxType::Path`, string literals and bare
words passed as an argument to that parameter are processed using the
path expansion rules. Right now, that only means that `~` is expanded into
the home directory, but additional rules are possible in the future.
By restricting this expansion to a syntactic expansion when passed as an
argument to a command expecting a path, we avoid making `~` a generally
reserved character. This will also allow us to give good tab completion
for paths with `~` characters in them when a command is expecting a path.
In order to accomplish the above, this commit changes the parsing functions
to take a `Context` instead of just a `CommandRegistry`. From the perspective
of macro expansion, you can think of the `CommandRegistry` as a dictionary
of in-scope macros, and the `Context` as the compile-time state used in
expansion. This could gain additional functionality over time as we find
more uses for the expansion system.
Remove a number of unwraps. In some cases, a `?` just worked as is. I also made it possible to use `?` to go from Result<OutputStream, ShellError> to OutputStream. Finally, started updating PerItemCommand to be able to use the signature deserialization logic, which substantially reduces unwraps.
This is still in-progress work, but tests pass and it should be clear to merge and keep iterating on master.
