# Checklist
- `nu-ansi-term` remains the same
- [x] `reedline` is released and updated
- [x] release scripts are updated for `nu-cmd-base`
- [x] info blog post is online
- [ ] release notes are ready
- fixes#9501
# Description
`chrono::Datetime::to_rfc2822()` panics when it would format a negative
year. 3339 does not. This makes negative-year datetimes inconsistent
compared to positive ones, but it's better than a panic.
# Description
`derive(EnumIter)` is only required to run completeness tests.
Thus make the derive conditional on test and move `strum` and
`strum_macros` to the dev dependencies.
## Is it worth it?
Removing this derive does not change the binary size (checked via `cargo
bloat --crates` from `cargo-bloat`).
Compile time change is below a second so hard to judge based on a single
run of `cargo clean --profile dev; cargo build --timings`
Unsure if this negatively impacts how incremental compilation can
recompile when you switch between `cargo build`/`run` and `cargo test`
in your local workflow.
To get rid of `strum`/`strum_macros` as a proc macro crate we would need
to also remove it from `reedline`.
Further more a crate in the `polars` dependency tree uses `strum`
(curently not as relevant for the 1.0 build).
# Description
This PR improves the error message if an environment variable (that's
visible before the parser begins) is used in the form of `$PATH` instead
of `$env.PATH`.
Before:
```
Error: nu::parser::variable_not_found
× Variable not found.
╭─[entry #31:1:1]
1 │ echo $PATH
· ──┬──
· ╰── variable not found.
╰────
```
After:
```
Error: nu::parser::env_var_not_var
× Use $env.PATH instead of $PATH.
╭─[entry #1:1:1]
1 │ echo $PATH
· ──┬──
· ╰── use $env.PATH instead of $PATH
╰────
```
# User-Facing Changes
Just the improvement to the error message
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Add `test_examples()` to `use` that verifies its examples. For that, add
the necessary definitions and the `PWD` to the `nu-cmd-lang` test
support.
Note: `let-env` is a `nu-command` and thus not accessible from the
`nu-cmd-lang` tests. So replace `let-env` with `$env.<var> =`. This
should be fine, since `let-env` is supposed to be removed before 1.0
anyway.
# User-Facing Changes
Nothing
# Question for reviewer
Is there any particular reason why so many core commands (parser
keywords) don't verify their examples with tests? E.g. `break`, `hide`,
`overlay use`, etc. (I think most of them?). If there is no particular
reason, I'd make a follow up PR to enable tests for as many of them as
possible.
In the spirit of #9509 we are changing the visibility of the bits
commands
to align with the way they are correctly done in the bytes commands...
Thanks to @sholderbach for pointing out this nice improvement
to me in my PR earlier in the day...
```rust
mod and;
mod bits_;
mod not;
mod or;
mod rotate_left;
mod rotate_right;
mod shift_left;
mod shift_right;
mod xor;
```
- improves usability of datetime's in displayed text
-
# Description
Creates a config point for specifying long / short date time formats.
Defaults to humanized as we have today.
Provides for adding strftime formats into config.nu such as:
```nu
datetime_format: {
normal: "%Y-%m-%d %H:%M:%S"
table: "%Y-%m-%d"
}
```
Example:
```bash
> $env.config.datetime_format
┏━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ normal ┃ %a, %d %b %Y %H:%M:%S %z ┃
┃ table ┃ %m/%d/%y %I:%M:%S%p ┃
┗━━━━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━┛
> let a = (date now)
> echo $a
Thu, 22 Jun 2023 10:21:23 -0700
> echo [$a]
┏━━━┳━━━━━━━━━━━━━━━━━━━━━┓
┃ 0 ┃ 06/22/23 10:21:23AM ┃
┗━━━┻━━━━━━━━━━━━━━━━━━━━━┛
```
# User-Facing Changes
Any place converting a datetime to a user displayed value should be
impacted.
# Tests + Formatting
- `cargo fmt --all -- --check` Done
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` Done
- `cargo test --workspace` Done
- `cargo run -- crates/nu-std/tests/run.nu` Not done - doesn't seem to
work
```bash
> use toolkit.nu # or use an `env_change` hook to activate it automatically
> toolkit check pr
``` - Done
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
# Description
This change adds a new flag to the `str replace` command: `--multiline`,
`-m`. This flag will automatically add the multiline regex flag `(?m)`
to the beginning of the supplied regex, allowing for the `^` and `$`
regex characters to match the beginnings and ends of lines,
respectively.
The main advantage of this addition is to make `str replace` more
closely match sed's default behavior of performing matches per-line with
a simple cli flag as opposed to forcing the user to add the {somewhat
clunky) regex flag themselves. This could be an especially valuable
addition since [`str replace` is listed as an alternative to sed in the
official
documentation](https://www.nushell.sh/book/coming_from_bash.html).
With this change, the following two commands would be functionally
equivalent:
```bash
# bash
printf "non-matching line\n123. one line\n124. another line\n" | sed -r 's/^[0-9]+\. //'
```
```bash
# nu
"non-matching line\n123. one line\n124. another line\n" | str replace -am '^[0-9]+\. ' ''
```
both producing the following output:
```
non-matching line
one line
another line
```
# User-Facing Changes
1. Adds a new flag to the `str replace` command: `--multiline`, `-m`.
# Tests + Formatting
I have update the unit tests to test this flag.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I will submit a PR for all relevant documentation changes as soon as
this PR is approved.
# Description
This PR cleans up the deprecated legacy config options that were
deprecated in nushell version 0.72.0. These are the config points that
were in the root of the config but also duplicated in the nested
structures. For instance `use_ls_colors` was in the root of the config
and also in the `ls.use_ls_colors` nested structure. This was originally
done to preserve backwards compatibility when nested structures were
introduced in the config file.
Here's a list of the legacy config points that were removed.
- `use_ls_colors` - previously replaced with `ls.use_ls_colors`
- `rm_always_trash` - previously replaced with `rm.always_trash`
- `history_file_format` - previously replaced with `history.file_format`
- `sync_history_on_enter` - previously replaced with
`history.sync_on_enter`
- `max_history_size` - previously replaced with `history.max_size`
- `quick_completions` - previously replaced with `completions.quick`
- `partial_completions` - previously replaced with `completions.partial`
- `max_external_completion_results` - previously replaced with
`completions.external.max_results`
- `completion_algorithm` - previously replaced with
`completions.algorithm`
- `case_sensitive_completions` - previously replaced with
`completions.case_sensitive`
- `enable_external_completion` - previously replaced with
`completions.external.enable`
- `external_completer` - previously replaced with
`completions.external.completer`
- `table_mode` - previously replaced with `table.mode`
- `table_index_mode` - previously replaced with `table.index_mode`
- `table_trim` - previously replaced with `table.trim`
- `show_clickable_links_in_ls` - previously replaced with
`ls.clickable_links`
- `cd_with_abbreviations` - previously replaced with `cd.abbreviations`
- `filesize_metric` - previously replaced with `filesize.metric`
- `filesize_format` - previously replaced with `filesize.format`
- `cursor_shape_vi_insert` - previously replaced with
`cursor_shape.vi_insert`
- `cursor_shape_vi_normal` - previously replaced with
`cursor_shape.vi_normal`
- `cursor_shape_emacs` - previously replaced with `cursor_shape.emacs`
Removes log_level from the config since it doesn't do anything any
longer. We moved log-level to a nushell parameter some time ago.
Renames history_isolation to isolation in the config.nu for consistency.
Fixes a couple bugs where values weren't being set in the "//
Reconstruct" sections (history_isolation, table_show_empty).
Reorganized/Moved things around a tiny bit and added a few comments.
# User-Facing Changes
history.histor_isolation is now history.isolation.
If anyone is still using the legacy config points, deprecated since
0.72.0 2022-11-29, their config will break.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
make history.max_size bigger so it doesn't eat history
closes#9493
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/pull/9404
# Description
to support our cratification effort and moving non-1.0 commands outside
of the main focus, this PR
- creates a new `nu-cmd-base` crate to hold the common structs, traits
and functions used by all command-related crates
- to start the transition, moves the `input_handler` module from
`nu-command` to `nu-cmd-base`
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
This splits off `scope` from `$nu`, creating a set of `scope` commands
for the various types of scope you might be interested in.
This also simplifies the `$nu` variable a bit.
# User-Facing Changes
This changes `$nu` to be a bit simpler and introduces a set of `scope`
subcommands.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/pull/8544
cc/ @jntrnr @ahkrr
# Description
some of the tests in the `dots.rs` file are a bit hard to read because
some of the paths look like command calls 🤔
in an attempt to making them easier to read, in the tests of `dots.rs`,
this PR
- replaces `file .../` with `not_a_cmd.../` because it's not a call to
the `file` command
- removes the space in `not_a_cmd .../` to see it's not a command call
- adds a bit more `not a cmd` to the last tests, to be consistent with
the other tests
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
In my view we should revert nushell/nushell#8395 for now
## Potentially inconsistent application of semantic change
#8395 (1d5e7b441b) was loosening the type
coercion rules significantly, to let missing data / void returns that
were either expressed by `PipelineData::Empty` or the `Value::nothing`
be accept by specifically those commands/operations that made use of
`PipelineData::into_iter_strict()`. This could apply the new rules
inconsistently.
## Turning explicit failures into silent continuations
Furthermore the effect of this breaking change to the missing data
semantics could make previous errors into silent failures.
This could either just reduce the effectiveness of teaching error
messages in interactive use:
### Contrived example before
```bash
> cd . | where blah
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #13:1:1]
1 │ cd . | where blah
· ──┬──┬
· │ ╰── input type: null
· ╰── only list, binary, raw data or range input data is supported
╰────
```
### ...after, with #8395
```bash
> cd . | where blah
╭────────────╮
│ empty list │
╰────────────╯
```
In rare cases people could already try to rely on catching an error of a
downstream command to actually deal with the missing data, so it would
be a breaking change for their existing code.
## Problem with `PipelineData::into_iter_strict()`
Maybe this makes `_strict` a bit of a misnomer for this particular
iterator construction.
Further we did not actively test the `PipelineData::empty` branch before
## Parsimonious solution exists
For the motivating issue https://github.com/nushell/nushell/issues/8393
there already exists a fix that makes `ls` more consistent with the type
system by returning an empty `Value::List`
https://github.com/nushell/nushell/pull/8439
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This PR fixes the following nightly clippy warnings.
```
warning: you should consider adding a `Default` implementation for `HjsonFormatter<'a>`
--> crates/nu-json/src/ser.rs:700:5
|
700 | / pub fn new() -> Self {
701 | | HjsonFormatter::with_indent(b" ")
702 | | }
| |_____^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default
= note: `#[warn(clippy::new_without_default)]` on by default
help: try adding this
|
698 + impl<'a> Default for HjsonFormatter<'a> {
699 + fn default() -> Self {
700 + Self::new()
701 + }
702 + }
|
warning: `nu-json` (lib) generated 1 warning
warning: private item shadows public glob re-export
--> crates/nu-command/src/strings/mod.rs:8:1
|
8 | mod str_;
| ^^^^^^^^^
|
note: the name `str_` in the type namespace is supposed to be publicly re-exported here
--> crates/nu-command/src/strings/mod.rs:17:9
|
17 | pub use str_::*;
| ^^^^^^^
note: but the private item here shadows it
--> crates/nu-command/src/strings/mod.rs:8:1
|
8 | mod str_;
| ^^^^^^^^^
= note: `#[warn(hidden_glob_reexports)]` on by default
warning: incorrect NaN comparison, NaN cannot be directly compared to itself
--> crates/nu-command/src/formats/to/nuon.rs:186:20
|
186 | && val != &f64::NAN
| ^^^^^^^^^^^^^^^^
|
= note: `#[warn(invalid_nan_comparisons)]` on by default
help: use `f32::is_nan()` or `f64::is_nan()` instead
|
186 - && val != &f64::NAN
186 + && !val.is_nan()
|
warning: `nu-command` (lib) generated 2 warnings (run `cargo clippy --fix --lib -p nu-command` to apply 1 suggestion)
Compiling nu v0.81.1 (/data/source/nushell)
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> crates/nu-command/tests/commands/rm.rs:392:27
|
392 | dir_to_clean: &test_dir,
| ^^^^^^^^^ help: change this to: `test_dir`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
= note: `#[warn(clippy::needless_borrow)]` on by default
warning: `nu-command` (test "main") generated 1 warning (run `cargo clippy --fix --test "main"` to apply 1 suggestion)
warning: `nu-command` (lib test) generated 2 warnings (2 duplicates)
warning: `nu-json` (lib test) generated 1 warning (1 duplicate)
Finished dev [unoptimized + debuginfo] target(s) in 3.89s
```
# User-Facing Changes
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
this PR should close#9018
# Description
This PR aims to fix the `input` command with `--suppress-output` on
Windows
This fixes two separates issues :
- Keypresses being duplicated in output due to "Release" event not being
ignored
- "Return" event from entering the `input -s "blah :"` still being in
the event buffer (need to be cleared before reading keypresses)
# Tests + Formatting
- `cargo fmt --all -- --check` ✔️
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` ✔️
- `cargo test --workspace` ✔️
- `cargo run -- crates/nu-std/tests/run.nu` ✔️
# Description
In cases that a path contained 3 or more `.` in succession followed by a
path-separator, the dots would be expanded.
This logic didn't take into account the cases where characters other
than a separator could appear before the `...`, which would lead to
`...` in filenames being expanded.
This PR changes the behavior so that path-segments consisting of 3 or
more dots only will be expanded.
This PR fixes issue #8386
# User-Facing Changes
Paths with filenames like `.../folder.../file.txt` will be correctly
expanded.
# Tests + Formatting
I added tests that cover a number of cases.
# Description
This allows empty pipelines to pass their emptiness through a filter.
This helps fix issues like trying to run a filter on an `ls` in an empty
directory. It also feels a bit more reasonable that a filter filters
what is *there* but doesn't require something to be there.
fixes#8393
# User-Facing Changes
No breaking changes (that I know of). Should allow filtering to be a
little less surprising with emptiness.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
Fixes a small bug with `rm` where names of files which couldn't be
deleted due to error were not printed.
Fixes https://github.com/nushell/nushell/issues/9004
# User-Facing Changes
Slightly different error message than previously. Nothing significant,
though.
The new error message looks like this
```
~/Projects/rust/nushell> rm /proc/1/mem 05/06/2023 01:13:23 PM
Error: nu:🐚:remove_not_possible
× Remove not possible
╭─[entry #3:1:1]
1 │ rm /proc/1/mem
· ─────┬─────
· ╰── Could not delete /proc/1/mem: Operation not permitted (os error 1)
╰────
```
or when using a glob (only showing a single entry for brevity)
```
Error: nu:🐚:remove_not_possible
× Remove not possible
╭─[entry #2:1:1]
1 │ rm --recursive --force --verbose /proc/1/*
· ────┬────
· ╰── Could not delete /proc/1/comm: Operation not permitted (os error 1)
╰────
```
# Tests + Formatting
No new unit tests were added for this change as it is pretty difficult
to test this particular case. However, manual testing was run with the
following commands
```
rm /proc/1/mem
rm --recursive --force --verbose /proc/1/*
```
# After Submitting
N/A
This PR reverts https://github.com/nushell/nushell/pull/9391
We try not to revert PRs like this, though after discussion with the
Nushell team, we decided to revert this one.
The main reason is that Nushell, as a codebase, isn't ready for these
kinds of optimisations. It's in the part of the development cycle where
our main focus should be on improving the algorithms inside of Nushell
itself. Once we have matured our algorithms, then we can look for
opportunities to switch out technologies we're using for alternate
forms.
Much of Nushell still has lots of opportunities for tuning the codebase,
paying down technical debt, and making the codebase generally cleaner
and more robust. This should be the focus. Performance improvements
should flow out of that work.
Said another, optimisation that isn't part of tuning the codebase is
premature at this stage. We need to focus on doing the hard work of
making the engine, parser, etc better.
# User-Facing Changes
Reverts the HashMap -> ahash change.
cc @FilipAndersson245
closes https://github.com/nushell/nushell/issues/9437
cc/ @Sygmei 😉
# Description
the syntax of *captures* used in `str replace` can be confusing for
people not used to the `regex` syntax.
there is already a capture example in `help str replace`
```bash
Find and replace with fancy-regex
> 'a successful b' | str replace '\b([sS])uc(?:cs|s?)e(ed(?:ed|ing|s?)|ss(?:es|ful(?:ly)?|i(?:ons?|ve(?:ly)?)|ors?)?)\b' '${1}ucce$2'
a successful b
```
but it's really not trivial to understand the *capture* syntax...
this PR adds a simpler example only focused on *captures*
🥳
```bash
Use captures to manipulate the input text
> "abc-def" | str replace "(.+)-(.+)" "${2}_${1}"
def_abc
```
# User-Facing Changes
an example in `help str replace` to understand the syntax of *captures*.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Fixes#9448
# Description
Attempts to fix a bug from the linked issue.
# User-Facing Changes
- The editor doesn't crash on wrong commands
# Tests + Formatting
Tests cover my changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Added comments to support API docs for the `nu-plugin` crate. Removed a
few items that I'd expect should only be used internally to Nushell from
the documentation and reduced the visibility of some items that did not
need to be public.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
There should be no user facing impact.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Standard tests run. Additionally numerous doctests were added to the
`nu-plugin` crate.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
No changes to the website necessary.
# Description
When the directory stack contains only two directories, then std dirs
drop
used to misbehave and (essentially) drop the other directory, instead of
dropping the current directory.
This is fixed by always cd'ing for std dirs drop.
Before:
/tmp〉enter ..
/〉dexit
/〉
After:
/tmp〉enter ..
/〉dexit
/tmp〉
Additionally, I propose to explain the relevant environment variables a
bit
more thoroughly.
# User-Facing Changes
- Fix bug in dexit (std dirs drop) when two directories are remaining
# Tests + Formatting
Added a regression test. Made the existing test easier to understand.
Parse the data from string to json if the `--content-type
"application/json"` flag is used for the request.
Fixes: https://github.com/nushell/nushell/issues/9408
In the issue, the actual data is a string `'{ "query": "{ greeting }"
}'` representing json, and it would match the case `Value::String { val,
.. }`
-------------------------
The example in the issue does set the `content-type` to
`application/json` but sends the body as a string note the `'`.
```
(
::: http post
::: -fer
::: # -H [ "Content-Type" "application/json" ]
::: --content-type "application/json"
::: 'http://127.0.0.1:3000/greetings/hello'
::: '{ "query": "{ greeting }" }'
::: )
```
```
╭─────────┬───────────────────────╮
│ headers │ {record 14 fields} │
│ body │ {"content_type":null} │
│ status │ 200 │
╰─────────┴───────────────────────╯
```
If we send the same request but using actual json as the body, the
Header is set correctly.
```
(
::: http post
::: -fer
::: # -H [ "Content-Type" "application/json" ]
::: --content-type "application/json"
::: 'http://127.0.0.1:3000/greetings/hello'
::: { "query": "{ greeting }" }
::: )
```
```
╭─────────┬─────────────────────────────────────╮
│ headers │ {record 14 fields} │
│ body │ {"content_type":"application/json"} │
│ status │ 200 │
╰─────────┴─────────────────────────────────────╯
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
- fixes: #5517
- fixes: #9250
For the following commands:
```
ls
# | le
| length
```
I found that it generates a bad lite parsing result:
```
LiteBlock {
block: [
LitePipeline {
commands: [
Command(None, LiteCommand { comments: [], parts: [Span { start: 138600, end: 138602 }] })
]
},
LitePipeline {
commands: [
Command(Some(Span { start: 138610, end: 138611 }),
LiteCommand { comments: [Span { start: 138603, end: 138609 }], parts: [Span { start: 138612, end: 138618 }] })
]
}
]
}
```
Which should contains only one `LitePipeline`, and the second
`LitePipeline` is generated because of `Eol` lex token:
```
[
Token { contents: Item, span: Span { start: 138600, end: 138602 } },
Token { contents: Eol, span: Span { start: 138602, end: 138603 } }, // it generates the second LitePipeline
Token { contents: Comment, span: Span { start: 138603, end: 138609 } },
Token { contents: Pipe, span: Span { start: 138610, end: 138611 } },
Token { contents: Item, span: Span { start: 138612, end: 138618 } }
]
```
To fix the issue, I remove the `Eol` token when we meet `Comment` right
after `Eol`, then it will generate a good LiteBlock, and everything will
work fine.
### After the fix:
Token:
```
[
Token { contents: Item, span: Span { start: 138618, end: 138620 } },
Token { contents: Comment, span: Span { start: 138622, end: 138628 } },
Token { contents: Pipe, span: Span { start: 138629, end: 138630 } },
Token { contents: Item, span: Span { start: 138631, end: 138637 } }
]
```
LiteBlock:
```
LiteBlock {
block: [
LitePipeline {
commands: [
Command(
None,
LiteCommand {
comments: [Span { start: 138622, end: 138628 }],
parts: [Span { start: 138618, end: 138620 }]
}
),
Command(
Some(Span { start: 138629, end: 138630 }),
LiteCommand { comments: [], parts: [Span { start: 138631, end: 138637 }] })] }] }
```
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
this PR makes nushell use mimalloc as the default allocator, this has
the benefit of reducing startup time on my machine. `17%` on linux and
`22%` on windows, when testing using hyperfine.
the overhead to compile seem to be quite small, aswell as the increase
of binary size quite small
on linux the binary went from `33.1mb` to `33.2mb`
linux
windows
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Make sure that our different crates that contain commands can be
compiled in parallel.
This can under certain circumstances accelerate the compilation with
sufficient multithreading available.
## Details
- Move `help` commands from `nu-cmd-lang` back to `nu-command`
- This also makes sense as the commands are implemented in an
ANSI-terminal specific way
- Make `nu-cmd-lang` only a dev dependency for `nu-command`
- Change context creation helpers for `nu-cmd-extra` and
`nu-cmd-dataframe` to have a consistent api used in
`src/main.rs`:`get_engine_state()`
- `nu-command` now indepedent from `nu-cmd-extra` and `nu-cmd-dataframe`
that are now dependencies of `nu` directly. (change to internal
features)
- Fix tests that previously used `nu-command::create_default_context()`
with replacement functions
## From scratch compilation times:
just debug (dev) build and default features
```
cargo clean --profile dev && cargo build --timings
```
### before
### after
# User-Facing Changes
None direct, only change to compilation on multithreaded jobs expected.
# Tests + Formatting
Tests that previously chose to use `nu-command` for their scope will
still use `nu-cmd-lang` + `nu-command` (command list in the granularity
at the time)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR removes ZB and ZiB from file size type, as they
were showing incorrect values due to an integer overflow.
Fixes: #9337
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the ini dependency.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Update the polars dependency for dataframes to stay on-version.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I'm not sure if this is a good idea or now but I did it to fix#9418. It
allows you to pass empty string arguments like this.
file named foo.nu
```
def main [--arg: string = dog] {
if ($arg | is-empty) {
echo "empty string"
} else {
echo $arg
}
}
```
`> nu foo.nu --arg ""`
or
`> nu foo.nu --arg=""`
this gives an error
`> nu foo.nu --arg`
this returns the default argument
`> nu foo.nu`
closes#9418
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is trying to allow you to have `[blah]` in your path and yet
still have `ls` work. This is done by trying to separate the path from
the pattern to be searched for. It may still need more work.
I've tested it with:
- mkdir "[test]"
- cd "[test]"
- ls
Related to #9307
Hopefully fixes#9232
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
close#9335
I am not sure whether the fix was better to be delived as a minor bump
but it is what is is.
Could you @fdncred test it somehow?
I did it by checking out back the the original commit before the PR
refered in the issue.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Makes use of the feature introduced by nushell/reedline#566
If we consider this to be problematic we can decide to add a config
point for this behavior, but at first I was a bit hesistant expanding
the config in this area.
# User-Facing Changes
Follows precedent found in bash/zsh/fish to exclude lines starting with
a space from the history.
Like in fish you can still recall the last entry once but it will not be
stored and will be forgotten after the next submitted entry.
# Tests + Formatting
(-)
Just makes it easier to find these commands when using the `help` system
- the `find` command already has the "regex" search term.
Co-authored-by: ja_cop <ja_cop@hoshi>
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Trying to fix#9394.
The problem with PR #9159 seems to be when searching for multiple terms,
each term is checked against the original values. It outputs a new value
for each such check, thus introducing replication for each search term.
As a result, it works fine with num of search term = 1.
# Description
Test runner now performs following actions in order to run tests:
* Module file is opened
* Public function with random name is added to the source code, this
function calls user-specified private function
* Modified module file is saved under random name in $nu.temp-path
* Modified module file is imported in subprocess, injected function is
called by the test runner
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* Test functions no longer need to be exported
* test functions no longer need to reside in separate test_ files
* setup and teardown renamed to before-each and after-each respectively
* before-all and after-all functions added that run before all tests in
given module. This matches the behavior of test runners used by other
languages such as JUnit/TestNG or Mocha
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Kamil <skelly37@protonmail.com>
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
Adds a new iter feature `zip-into-record` (#9380)
# User-Facing Changes
User can use `[1 2] | iter zip-into-record [3 4]` to create a table `[[1
2]; [3 4]]`
# Tests + Formatting
I noticed trailing spaces in std library that may wish to be cleaned in
the future.
Co-authored-by: amtoine <stevan.antoine@gmail.com>
cc/ @stormasm
# Description
i was about to start the cratification of the 0% commands and thought i
could refactor and simplify a bit the declaration of the `bits`
commands, having hopefully a simpler structure to work with the other
commands 😌
this PR:
- gives real names to all the `bits` commands, instead of `SubCommand`
- make them publicly available inside the `nu-cmd-extra` crate to
declare them through `add_extra_decls`
- move the declaration code to the top-level `mod.nu` of `nu-cmd-extra`
so that all commands can be declared there as in `default_context` in
`nu-command`
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
see https://github.com/nushell/nushell/issues/9390
using `ahash` instead of the default hasher. this will not affect
compile time as we where already building `ahash`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9218
When user execute some commands involve user input, currently if we
enable `bracketed_paste`, it will results strange behavior (Pasting `0~`
and `1~` around texts, e.g: `aaa` -> `0~aaa1~`) And this is why `gpg`
with paste failed.
Sorry that it's hard to make relative testing...
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
It's not a good idea to save `stdout` and `stderr` to the same file from
`save` command directly.
Because it saves `stdout` and `stderr` in different thread, which leads
to in-consistent output. As replace, we can use `o+e` redirection to fix
the issue
# User-Facing Changes
```
❯ do -i { "aa" } | save foo.txt -e foo.txt
Error: × input and stderr input to same file
╭─[entry #3:1:1]
1 │ do -i { "aa" } | save foo.txt -e foo.txt
· ───┬───
· ╰── can't save both input and stderr input to the same file
╰────
help: you should use `o+e> file` instead
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9293
The problem is caused by `save` makes a `BufferWriter` for output file,
when external commands redirect it's output to a file, the content is
bufferred first...
To fix the issue, I'd like to introduce a `--no-buf` flag for `save`
command, and it's only used in redirection scenario.
Sorry it's hard to test against it in test, because it requires external
command to sleep or pause...
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
closes: #9344
Different to other http commands, `http options` command always returns
header, according to
[MDN](https://developer.mozilla.org/en-US/docs/Web/HTTP/Methods/OPTIONS),
the response information is included in header.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix for #9347
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- [x] Add unit tests
- [x] Run all cargo tests + fmt commands
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`cargo +stable check` was complaining about ambiguous wildcard
reexports. Fixed by making the reexport of modules not pub as only the
explicitly named symbols are actually needed in the current state.
# User-Facing Changes
None
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I have (hopefully) simplified the `log.nu` internal structure and added
customizable log format for all `log` commands
# User-Facing Changes
- [x] Replaced constants with env records for:
- ansi (newly added)
- log level
- prefix
- short prefix
- [x] Added `format` argument to all log commands
- [x] Assertions for (not) equality (equal, not equal, greater,
lesser...) now put left and right values inside `'` quotes, so the
assertions for strings are more meaningful
- [x] Documented the %-formatting of log messages
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
closes#9348
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
In keeping with our tradition of staying 2 versions behind the latest
rust compiler version, this PR bump the toolchain to 1.68.2.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This change allows you to have a list of exclude globs such as:
```
glob **/* --not [**/target/** **/.git/**]
```
TODO: Allow the input glob to be multiples too with
`wax::any(patterns)?`
The breaking change part is that the excludes have to be supplied as a
list, between [ and ].
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This change introduces new `search_result` style supported in the color
config. The change also removes obsolete check for `config.ls_colors`
for computing the style. `config.ls_colors` has been removed last year,
so this removes the reference to the obsolete flag, along with a cleanup
that removes all the code that used to rely on ls_colors for
highlighting search results.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds some tests that were generated in GitHub Copilot Chat
Preview. I was just playing around and figured that more tests couldn't
hurt.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
We needed to include the nu-cmd-extra crate in the version command's
features...
In the style of this PR which fixed the dataframe feature upon adding
the nu-cmd-dataframe crate...
https://github.com/nushell/nushell/pull/9262
I wanted to get the infrastructure in place for starters for our
*nu-cmd-extra* crate...
The plan is to put inside here the following commands...
* bits
* bytes
* math
I thought it would be easier to do one at a time as well as get the
nu-cmd-extra crate out there on crates.io
for this upcoming release...
Once this lands the infrastructure will be in place to move over the
other noted commands for now...
And then add other stuff we do NOT want to be in 1.0.
Adding more float constants for when
https://github.com/rust-lang/rust/issues/103883 is accepted and merged.
And fixing a small conflation in the description of the Euler number.
Please take a look and let me know if I've missed or screwed up
anything.
# Description
Improves the output when running `input list` on tabular data by
aligning each column.
# User-Facing Changes
## Before
## After
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9165
It's because `sys` returns a lazy record, and `insert`, `update`,
`upsert` can't operate on lazy record yet.
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Today the only way to extract date parts from a dfr series is the dfr
get-* set of commands. These create a new dataframe with just the
datepart in it, which is almost entirely useless. As far as I can tell
there's no way to append it as a series in the original dataframe. In
discussion with fdncred on Discord we decided the best route was to add
an expression for modifying columns created in dfr with-column. These
are the way you manipulate series within a data frame.
I'd like feedback on this approach - I think it's a fair way to handle
things. An example to test it would be:
```[[ record_time]; [ (date now)]] | dfr into-df | dfr with-column [ ((dfr col record_time) | dfr datepart nanosecond | dfr as "ns" ), (dfr col record_time | dfr datepart second | dfr as "s"), (dfr col record_time | dfr datepart minute | dfr as "m"), (dfr col record_time | dfr datepart hour | dfr as "h") ]```
I'm also proposing we deprecate the dfr get-* commands. I've not been able to figure out any meaningful way they could ever be useful, and this approach makes more sense by attaching the extracted date part to the row in the original dataframe as a new column.
<!--
Thank you for improving Nushell. Please, check our [contributing guide](../CONTRIBUTING.md) and talk to the core team before making major changes.
Description of your pull request goes here. **Provide examples and/or screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
add in dfr datepart as an expression
<!-- List of all changes that impact the user experience here. This helps us keep track of breaking changes. -->
# Tests + Formatting
Need to add some better assertive tests. I'm also not sure how to properly write the test_dataframe at the bottom, but will revisit as part of this PR. Wanted to get feedback early.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect -A clippy::result_large_err` to check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date. -->
---------
Co-authored-by: Robert Waugh <robert@waugh.io>
# Description
This PR restores cursor shape when nushell exists.
Fixes#9243
Related
[nushell/reedline#574](https://github.com/nushell/reedline/pull/574)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* windows
https://github.com/nushell/nushell/assets/15247421/ede8d1c0-ecd1-40b0-87b0-6393c1a7160f
* linux
https://github.com/nushell/nushell/assets/15247421/b428f17e-05cb-45ad-aa5f-3a9753fd9176
* macos
https://github.com/nushell/nushell/assets/15247421/5170dabd-8b9f-4bad-a7a2-bdabfca45cca
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to the namespace bullet point in
- https://github.com/nushell/nushell/issues/8450
# Description
this was the last module of the standard library with a broken
namespace, this PR takes care of this.
- `run-tests` has been moved to `std/mod.nu`
- `std/testing.nu` has been moved to `std/assert.nu`
- the namespace has been fixed
- `assert` is now called `main` and used in all the other `std assert`
commands
- for `std assert length` and `std assert str contains`, in order not to
shadow the built-in `length` and `str contains` commands, i've used
`alias "core ..." = ...` to (1) define `foo` in `assert.nu` and (2)
still use the builtin `foo` with `core foo` (replace `foo` by `length`
or `str contains`)
- tests have been fixed accordingly
# User-Facing Changes
one can not use
```
use std "assert equal"
```
anymore because `assert ...` is not exported from `std`.
`std assert` is now a *real* module.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Notes for reviewers
to test this, i think the easiest is to
- run `toolkit test stdlib` and see all the tests pass
- run `cargo run -- -n` and try `use std assert` => are all the commands
available in scope?
# Description
The old description ("Nushell table printing") is identical to that of
`nu-table`. Per `explore --help` it is probably more accurate to say
"Nushell table pager".
# User-Facing Changes
N/A
# Tests + Formatting
```
❯ cargo metadata --no-deps | from json | get packages | get 14 | get description
warning: please specify `--format-version` flag explicitly to avoid compatibility problems
Nushell table pager
```
# After Submitting
N/A - change will go out when `0.82.0` is released
Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org>
# Description
This PR updates most dependencies and tries to get in sync with
reedline.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
in order to write tests for the `std help` commands, as we currently
have in the Rust source base, we need to be able to manipulate the
output of the `std help` commands.
however, until now they've all been directly printing the help pages as
they go...
this PR tries to build the help pages and return them at the end instead
of printing them on the fly 👍
> **Note**
> this is quite a rewrite of the `help.nu` module 🤔
> i think it might be best to either
> - look at the commits in order
> - test the changes by testing the commands in the REPL and comparing
them to their previous `std help` versions
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Add "os record" support.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This don't change how path add works but just adds support for "os
records" aka records whose key are at least one of:
- linux
- macos
- windows
Check the
[test](a917f1a924/crates/nu-std/tests/test_std.nu (L31-L32))
if that's not clear enough
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
I don't want to rm my home again.. sadly..
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
check if there is unique argument
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
user will not easily rm their home
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Moves us over to dogfooding the git version of reedline ahead of the
next release.
# User-Facing Changes
With luck, you should see fewer bugs :D
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes the clippy warnings we're about to get hit with next time we
upgrade Rust.
The big one was shrinking ShellError and related under 128 bytes.
# User-Facing Changes
Shouldn't notice much difference. In theory, we could see a tiny perf
improvement, but I didn't notice one.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This removes some unnecessary SyntaxShapes when parsing a
SyntaxShape::Any. Recent updates to the parser look for `{` and then
handle the logic for that separately.
# User-Facing Changes
This may have a slight parser speedup.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR cleans a couple things up. Nothing major, just a few things that
caught my eye looking for something else.
1. less macros
2. hidden and italic styles weren't fully available
3. lookup_color function didn't lookup all the colors available
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes https://github.com/nushell/nushell/issues/9229.
Supersedes #9234
The reported problem was that `shells` list of active shells (a.k.a `std
dirs show` would show an inaccurate active
working directory if user changed it via `cd` command.
The fix here is for the `std dirs` module to let `$env.PWD` mask the
active slot of `$env.DIRS_LIST`. The user is free to invoke CD (or write
to `$env.PWD`) and `std dirs show` will display that as the active
working directory.
When user changes the active slot (via `n`, `p`, `add` or `drop`) `std
dirs` remembers the then current PWD in the about-to-be-vacated active
slot in `$env.DIRS_LIST`, so it is there if you come back to that slot.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None. It just works™️
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> [x] use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
I was trying `-H [key-A val-A] -H [key-B val-B]` but thanks to @Dorumin
I discovered how it should be used.
This PR just adds an extra example to the help with multiple headers.
Feel free to edit it either to merge both header examples into one or
rename the key value used, but I think it would be nice to have a sample
as the multiple -H variant doesn't error out it wasn't obvious to me.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
One more help example in `help http get`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#9254.
# User-Facing Changes
upserting data of a cellpath that doesn't exist into a record now
creates the cellpath.
# Tests + Formatting
```
~/CodingProjects/nushell> mut a = {}
~/CodingProjects/nushell> $a.b.c = 99
~/CodingProjects/nushell> $a
╭───┬────────────╮
│ │ ╭───┬────╮ │
│ b │ │ c │ 99 │ │
│ │ ╰───┴────╯ │
╰───┴────────────╯
```
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Addresses missing features per #9261
# User-Facing Changes
Fixes output of version. Adds wasi feature output
# Tests + Formatting
No tests written
Co-authored-by: Robert Waugh <robert@waugh.io>
# Description
Closes: #7853
I found that I want this feature too...
So I take over it, sorry for that @VincenzoCarlino
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to the changes in
- #9193
# Description
when we change the namespace of a module, the internal calls to the
`export`ed commands needs to be updated as well 👀😆
without this, we have the following pretty error:
```
> std help ansi
Error: × std::help::item_not_found
╭─[entry #1:1:1]
1 │ std help ansi
· ──┬─
· ╰── item not found
╰────
```
# Description
Fixes#8896. Also went back and cleaned up the code slightly.
# User-Facing Changes
`view-source` now is more comprehensive when viewing definitions.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes#9217 (some cases, still can't accept all default expressions)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Follow-up of #8940, expanding `eval_constant` so that it can also
evaluate values with units.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- A unit test was added to verify that defaults like `1sec` are
accepted.
# Description
Title; fixes#9208.
# User-Facing Changes
`input` now can specify a certain number of characters to read.
# Tests + Formatting
No CI tests; can't find a way to implement.
```
~/CodingProjects/nushell> let user_input = (input --numchar 2)
~/CodingProjects/nushell> echo $user_input
te
```
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
All of the dataframe commands ported over with no issues...
### 11 tests are commented out (for now)
So 100 of the original 111 tests are passing with only 11 tests being
ignored for now..
As per our conversation in the core team meeting on Wednesday
I took @jntrnr suggestion and just commented out the tests dealing
with
[IntoDatetime](https://github.com/nushell/nushell/blob/main/crates/nu-command/src/conversions/into/mod.rs)
Later on we can move this functionality out of nu-command if we decide
it makes sense...
### The following tests were ignored...
```rust
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_day.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_hour.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_minute.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_month.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_nanosecond.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_ordinal.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_second.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_week.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_weekday.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/date/get_year.rs
modified: crates/nu-cmd-dataframe/src/dataframe/series/string/strftime.rs
```
# Description
A new command to simplify assertions for `false`.
The name is just a draft, though I could not come up with a better name.
I have rejected `assert false`, because I would have to rename `assert`
to `assert true` which would break the compatibility and worsen the
shell experience of the good old `assert`.
Another idea I have rejected was something like `assert_false` to keep
it consistent with the naming convention of our stdlib.
I am open to suggestions :)
# User-Facing Changes
Just a new command
# Tests + Formatting
- [x] Done
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This is a test PR to see if we can remove dependencies. The crates to
remove was generated from cargo machete. If ci works, I'll update the PR
to remove deps instead of comment them out.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`ansi strip` (used in the clip command by default) removes tab symbols,
which is sometimes not useful (for example, when using the `[[a b]; [1
2]] | to tsv | clip` command). Therefore, I added a flag to prevent
using `ansi strip` in the clip command.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
PATH and Path are different (in nushell at least) based on the OS
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None the command now works as expected
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Cleans up various tests that unnecessarily use the `cwd` argument of
`nu!`, and the `pipeline` function for single line commands. Also
replaces some unnecessary raw strings with normal strings. Part of
#8670.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All checks pass
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
closes#9111
# Description
this pr improves parsing of values with units (`filesizes`, `durations`
and any other **future values**) by:
1. allowing underscores in the value part
```nu
> 42kb # okay
> 42_sec # okay
> 1_000_000mib # okay
> 69k_b # not okay, underscores not allowed in the unit
```
2. improving error messages involving these values
```nu
> sleep 40-sec
# before
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #42:1:1]
1 │ sleep 40-sec
· ──┬──
· ╰── expected duration with valid units
╰────
# now
Error:
× duration value must be a number
╭─[entry #41:1:1]
1 │ sleep 40-sec
· ─┬─
· ╰── not a number
╰────
```
3. unifying parsing of these values. now all of these use one function
# User-Facing Changes
filesizes and durations can now have underscores for readability
# Description
Despite the innocent-looking title, this PR involves quite a few backend
changes as the existing LazyRecord trait was not at all friendly towards
the idea of these values being generated on the fly from Nu code.
In particular, here are a few changes involved:
- The LazyRecord trait now involves a lifetime `'a`, and this lifetime
is used in the return value of `get_column_names`. This means it no
longer returns `'static str`s (but implementations still can return
these). This is more stringent on the consumption side.
- The LazyRecord trait now must be able to clone itself via a new
`clone_value` method (as requiring `Clone` is not object safe). This
pattern is borrowed from `Value::CustomValue`.
- LazyRecord no longer requires being serde serializable and
deserializable.
These, in hand, allow for the following:
- LazyRecord can now clone itself, which means that they don't have to
be collected into a Record when being cloned.
- This is especially useful in Stack, which is cloned on each repl line
and in a few other cases. This would mean that _every_ LazyRecord
instance stored in a variable would be collected in its entirety and
cloned, which can be catastrophic for performance. See: `let nulol =
$nu`.
- LazyRecord's columns don't have to be static, they can have the same
lifetime of the struct itself, so different instances of the same
LazyRecord type can have different columns and values (like the new
`NuLazyRecord`)
- Serialization and deserialization are no longer meaningless, they are
simply less.
I would consider this PR very "drafty", but everything works. It
probably requires some cleanup and testing, though, but I'd like some
eyes and pointers first.
# User-Facing Changes
New command. New restrictions are largely internal. Maybe there are some
plugins affected?
Example of new command's usage:
```
lazy make --columns [a b c] --get-value { |name| print $"getting ($name)"; $name | str upcase }
```
You can also trivially implement something like `lazy make record` to
take a record of closures and turn it into a getter-like lazy struct:
```
def "lazy make record" [
record: record
] {
let columns = ($record | columns)
lazy make --columns $columns --get-value { |col| do ($record | get $col) }
}
```
Open to bikeshedding. `lazy make` is similar to `error make` which is
also in the core commands. I didn't like `make lazy` since it sounded
like some transformation was going on.
# Tour for reviewers
Take a look at LazyMake's examples. They have `None` as the results, as
such they aren't _really_ correct and aren't being tested at all. I
didn't do this because creating the Value::LazyRecord is a little tricky
and didn't want to risk messing it up, especially as the necessary
variables aren't available when creating the examples (like stack and
engine state).
Also take a look at NuLazyRecord's get_value implementation, or in
general. It uses an Arc<Mutex<_>> for the stack, which must be accessed
mutably for eval_block but get_value only provides us with a `&self`.
This is a sad state of affairs, but I don't know if there's a better
way.
On the same code path, we also have pipeline handling, and any pipeline
that isn't a Pipeline::Value will return Value::nothing. I believe
returning a Value::Error is probably better, or maybe some other
handling. Couldn't decide on which ShellError to settle with for that
branch.
The "unfortunate casualty" in the columns.rs file. I'm not sure just how
bad that is, though, I simply had to fight a little with the borrow
checker.
A few leftover comments like derives, comments about the now
non-existing serde requirements, and impls. I'll definitely get around
to those eventually but they're in atm
Should NuLazyRecord implement caching? I'm leaning heavily towards
**yes**, this was one of the main reasons not to use a record of
closures (besides convenience), but maybe it could be opt-out. I'd
wonder about its implementation too, but a simple way would be to move a
HashMap into the mutex state and keep cached values there.
Closes#9003.
This PR changes `group-by` so that its optional argument is interpreted
as a cell path. In turn, this lets users use `?` to ignore rows that are
missing the column they wish to group on. For example:
```
> [{foo: 123}, {foo: 234}, {bar: 345}] | group-by foo
Error: nu:🐚:column_not_found
× Cannot find column
╭─[entry #3:1:1]
1 │ [{foo: 123}, {foo: 234}, {bar: 345}] | group-by foo
· ─────┬──── ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
> [{foo: 123}, {foo: 234}, {bar: 345}] | group-by foo?
╭─────┬───────────────╮
│ 123 │ [table 1 row] │
│ 234 │ [table 1 row] │
╰─────┴───────────────╯
```
~~This removes the ability to pass `group-by` a closure or block (I
wasn't able to figure out how to make the 2 features coexist), and so it
is a breaking change. I think this is OK; I didn't even know `group-by`
could accept a closure or block because there was no example for that
functionality.~~
# Description
Fixes: #8565
Here is another pr #7240 tried to address the issue, but it works in a
wrong way.
After this change `o+e>` won't redirect all stdout message then stderr
message and it works more like how bash does.
# User-Facing Changes
For the given python code:
```python
# test.py
import sys
print('aa'*300, flush=True)
print('bb'*999999, file=sys.stderr, flush=True)
print('cc'*300, flush=True)
```
Running `python test.py out+err> a.txt` shoudn't hang nushell, and
`a.txt` keeps output in the same order
## About the change
The core idea is that when doing lite-parsing, introduce a new variant
`LiteElement::SameTargetRedirection` if we meet `out+err>` redirection
token(which is generated by lex function),
During converting from lite block to block,
LiteElement::SameTargetRedirection will be converted to
PipelineElement::SameTargetRedirection.
Then in the block eval process, if we get
PipelineElement::SameTargetRedirection, we'll invoke `run-external` with
`--redirect-combine` flag, then pipe the result into save command
## What happened internally?
Take the following command as example:
`^ls o+e> log.txt`
lex parsing result(`Tokens`) are not changed, but `LiteBlock` and
`Block` is changed after this pr.
### LiteBlock before
```rust
LiteBlock {
block: [
LitePipeline { commands: [
Command(None, LiteCommand { comments: [], parts: [Span { start: 39041, end: 39044 }] }),
// actually the span of first Redirection is wrong too..
Redirection(Span { start: 39058, end: 39062 }, StdoutAndStderr, LiteCommand { comments: [], parts: [Span { start: 39050, end: 39057 }] }),
]
}]
}
```
### LiteBlock after
```rust
LiteBlock {
block: [
LitePipeline {
commands: [
SameTargetRedirection {
cmd: (None, LiteCommand { comments: [], parts: [Span { start: 147945, end: 147948}]}),
redirection: (Span { start: 147949, end: 147957 }, LiteCommand { comments: [], parts: [Span { start: 147958, end: 147965 }]})
}
]
}
]
}
```
### Block before
```rust
Pipeline {
elements: [
Expression(None, Expression {
expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 39042, end: 39044 }, ty: String, custom_completion: None }, [], false),
span: Span { start: 39041, end: 39044 },
ty: Any, custom_completion: None
}),
Redirection(Span { start: 39058, end: 39062 }, StdoutAndStderr, Expression { expr: String("out.txt"), span: Span { start: 39050, end: 39057 }, ty: String, custom_completion: None })] }
```
### Block after
```rust
Pipeline {
elements: [
SameTargetRedirection {
cmd: (None, Expression {
expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 147946, end: 147948 }, ty: String, custom_completion: None}, [], false),
span: Span { start: 147945, end: 147948},
ty: Any, custom_completion: None
}),
redirection: (Span { start: 147949, end: 147957}, Expression {expr: String("log.txt"), span: Span { start: 147958, end: 147965 },ty: String,custom_completion: None}
}
]
}
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when I run clippy locally, I get something like following
warning:
<img width="1383" alt="Screenshot 2023-05-15 at 22 34 57"
src="https://github.com/nushell/nushell/assets/22256154/4d4254bc-9e42-437e-9169-d15e9a97aa57">
This pr is going to fix it
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
…ses).
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
See title.
Fixes#9154
(despite name of branch)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
n/a
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> [x] toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Bump nushell to 0.80.1 development version
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Related to #8368.
# Description
as planned in #8311, the `enter`, `shells`, `g`, `n` and `p` commands
have been re-implemented in pure-`nushell` in the standard library.
this PR removes the `rust` implementations of these commands.
- all the "shells" tests have been removed from
`crates/nu-commnand/tests/commands/` in
2cc6a82da6, except for the `exit` command
- `cd` does not use the `shells` feature in its source code anymore =>
that does not change its single-shell behaviour
- all the command implementations have been removed from
`crates/nu-command/src/shells/`, except for `exit.rs` => `mod.rs` has
been modified accordingly
- the `exit` command now does not compute any "shell" related things
- the `--now` option has been removed from `exit`, as it does not serve
any purpose without sub-shells
# User-Facing Changes
users may now not use `enter`, `shells`, `g`, `n` and `p`
now they would have to use the standard library to have access to
equivalent features, thanks to the `dirs.nu` module introduced by @bobhy
in #8368
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
the website will have to be regenerated to reflect the removed commands
👍
related to
- #9101
- #9039
# Description
i actually forgot to fix in #9039 the new "*item*" introduced by
#9101... 👀
there it is 😇
# User-facing changes
going from
```
> std help git-commiteuwqi
Help pages from external command git-commiteuwqi:
No manual entry for git-commiteuwqi
Error:
× std::help::item_not_found
╭─[help:721:1]
721 │
722 │ let item = ($item | str join " ")
· ─┬─
· ╰── item not found
723 │
╰────
```
to
```
> std help git-commiteuwqi
Help pages from external command git-commiteuwqi:
No manual entry for git-commiteuwqi
Error:
× std::help::item_not_found
╭─[entry #2:1:1]
1 │ std help git-commiteuwqi
· ───────┬───────
· ╰── item not found
╰────
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Description: Fix of #8945.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: jpaldino <jpaldino@zaloni.com>
# Description
closes#8934
this pr improves the diagnostic emitted when the name and parameters of
either `def`, `def-env` or `extern` are not separated by a space
```nu
Error:
× no space between name and parameters
╭─[entry #1:1:1]
1 │ def err[] {}
· ▲
· ╰── expected space
╰────
help: consider adding a space between the `def` command's name and its parameters
```
from
```nu
Error: nu::parser::missing_positional
× Missing required positional argument.
╭─[entry #1:1:1]
1 │ def err[] {}
╰────
help: Usage: def <def_name> <params> <body>
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Jelle Besseling <jelle@pingiun.com>
This does part of the work of porting to polars 0.29.
However, I am not familiar enough with this part of the codebase to
finish it.
Things to be done:
- We match two times over `polars::Expr` but `Expr::Cache` isn't
handled. I don't know what should be done here
- `ArgExpr:::List` was renamed to `ArgExpr::Implode`. Does that mean
that `dfr list` should be renamed to `dfr implode`?
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Change the parser a little bit so it does less allocations when it's
parsing, specifically when parsing lists/tables
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes the `create_left_prompt` custom command to work with
Windows.
Before:
After:
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
(*third* try at posting this PR, #9104, like #9084, got polluted with
unrelated commits. I'm never going to pull from the github feature
branch again!)
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Show parameter defaults in scope command signature, where they're
available for display by help.
per https://github.com/nushell/nushell/issues/8928.
I found unexpected ramifications in one completer (NuHelpCompleter) and
plugins, which both use the flag-formatting routine from builtin help.
For the moment I made the minimum necessary changes to get the mainline
scenario to pass tests and run. But we should circle back on what to do
with plugins and help completer..
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
1. New `parameter_default` column to `signatures` table in
`$nu.scope.commands`
It is populated with whatever parameters can be defaulted: currently
positional args and named flags.
2. Built in help (both `help <command>` and `<command> --help` will
display the defaults
3. Help completer will display defaults for flags, but not for
positionals.
Example:
A custom command with some default parameters:
```
〉cat ~/work/dflts.nu
# sample function to show defaults in help
export def main [
arg1: string # mandatory positional
arg2:string=abc # optional positional
--switch # no default here
--named:int # named flag, no default
--other:string=def # flag
--hard:record<foo:int bar:string, bas:bool> # default can be compound type
= {foo:22, bar:"other worlds", bas:false}
] { {arg1: $arg1,
arg2: $arg2,
switch: $switch,
named: $named,
other: $other,
hard: $hard, }
}
〉use ~/work/dflts.nu
〉$nu.scope.commands | where name == 'dflts' | get signatures.0.any | reject short_flag description custom_completion
╭───┬────────────────┬────────────────┬──────────────────────────────────────────┬─────────────┬───────────────────────────╮
│ # │ parameter_name │ parameter_type │ syntax_shape │ is_optional │ parameter_default │
├───┼────────────────┼────────────────┼──────────────────────────────────────────┼─────────────┼───────────────────────────┤
│ 0 │ │ input │ any │ false │ │
│ 1 │ arg1 │ positional │ string │ false │ │
│ 2 │ arg2 │ positional │ string │ true │ abc │
│ 3 │ switch │ switch │ │ true │ │
│ 4 │ named │ named │ int │ true │ │
│ 5 │ other │ named │ string │ true │ def │
│ 6 │ hard │ named │ record<foo: int, bar: string, bas: bool> │ true │ ╭───────┬───────────────╮ │
│ │ │ │ │ │ │ foo │ 22 │ │
│ │ │ │ │ │ │ bar │ other worlds │ │
│ │ │ │ │ │ │ bas │ false │ │
│ │ │ │ │ │ ╰───────┴───────────────╯ │
│ 7 │ │ output │ any │ false │ │
╰───┴────────────────┴────────────────┴──────────────────────────────────────────┴─────────────┴───────────────────────────╯
〉help dflts
sample function to show defaults in help
Usage:
> dflts {flags} <arg1> (arg2)
Flags:
--switch - switch -- no default here
--named <Int> - named flag, typed, but no default
--other <String> - flag with default (default: 'def')
--hard <Record([("foo", Int), ("bar", String), ("bas", Boolean)])> - default can be compound type (default: {foo: 22, bar: 'other worlds', bas: false})
-h, --help - Display the help message for this command
Parameters:
arg1 <string>: mandatory positional
arg2 <string>: optional positional (optional, default: 'abc')
```
Compared to (relevant bits of) help output previously:
```
Flags:
-h, --help - Display the help message for this command
-, --switch - no default here
-, --named <int> - named flag, no default
-, --other <string> - flag
-, --hard <record<foo: int, bar: string, bas: bool>> - default can be compound type
Signatures:
<any> | dflts <string> <string> -> <any>
Parameters:
arg1 <string>: mandatory positional
(optional) arg2 <string>: optional positional
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> [x] toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes issue #9043 where find -v was returning empty tables
and/or wrong output.
It also refactors some big code chunks with repetitions into it's own
functions.
# User-Facing Changes
# Tests + Formatting
Unit tests added for asserting changes.
# After Submitting
# Description
this pr adds the following commands to `std iter`
- `iter find-index` -> returns the index of the first element that
matches the predicate or `-1` if none
- `iter flat-map` -> maps a closure to each nested structure and
flattens the result
- `iter zip-with` -> zips two structures and applies a closure to each
of the zips
it also fixes some \*\*very minor\*\* inconsistencies in the module
Related to:
- #8311
- #8353
# Description
with the new `$nu.startup-time` from #8353 and as mentionned in #8311,
we are now able to fully move the `nushell` banner from the `rust`
source base to the standard library.
this PR
- removes all the `rust` source code for the banner
- rewrites a perfect clone of the banner to `std.nu`, called `std
banner`
- call `std banner` from `default_config.nu`
# User-Facing Changes
see the demo: https://asciinema.org/a/566521
- no config will show the banner (e.g. `cargo run --release --
--no-config-file`)
- a custom config without the `if $env.config.show_banner` block and no
call to `std banner` would never show the banner
- a custom config with the block and `config.show_banner = true` will
show the banner
- a custom config with the block and `config.show_banner = false` will
NOT show the banner
# Tests + Formatting
a new test line has been added to `tests.nu` to check the length of the
`std banner` output.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
```
$nothing
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR adds the ability to add a negation glob.
Normal Example:
```
> glob **/tsconfig.json
╭───┬────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ 0 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\client\node_modules\big-integer\tsconfig.json │
│ 1 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\client\tsconfig.json │
│ 2 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\node_modules\fastq\test\tsconfig.json │
│ 3 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\node_modules\jszip\tsconfig.json │
│ 4 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\server\tsconfig.json │
│ 5 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\tsconfig.json │
╰───┴────────────────────────────────────────────────────────────────────────────────────────────────────────╯
```
Negation Example:
```
> glob **/tsconfig.json --not **/node_modules/**
╭───┬───────────────────────────────────────────────────────────────────────────────╮
│ 0 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\client\tsconfig.json │
│ 1 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\server\tsconfig.json │
│ 2 │ C:\Users\username\source\repos\forks\vscode-nushell-lang\tsconfig.json │
╰───┴───────────────────────────────────────────────────────────────────────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This change ensures that the ordering of map keys when reading YAML
files is consistent. Previously a `HashMap` was used to store the
mappings, but that would result in non-deterministic ordering of the
keys. Switching to an `IndexMap` fixes this.
Fixes https://github.com/nushell/nushell/issues/8662
# User-Facing Changes
User's can rely on consistent ordering of map keys from YAML.
# Tests + Formatting
A unit test ensuring the ordering has been added.
# After Submitting
None.
# Description
Use `buffer.len()` instead of `cursor_pos`, so the `.expect()` isn't
useless.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
when running `nushell` with the `--no-config-file` option, the left
prompt does not have a space to separate the directory path from the
user input.
in this PR i add a space there to make the prompt easier to read when
using `--no-config-file`!
# User-Facing Changes
before: https://asciinema.org/a/581733
after: https://asciinema.org/a/581734
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
an example should show what happens quite clearly 😋
> **Note**
> the ugly spanned errors you'll see below are fixed in
https://github.com/nushell/nushell/pull/9039😌
in all cases we get
```
> std help commands does-not-exist-anywhere
Help pages from external command does-not-exist-anywhere:
No manual entry for does-not-exist-anywhere
Error:
× std::help::command_not_found
╭─[help:662:1]
662 │
663 │ let command = ($command | str join " ")
· ─┬─
· ╰── command not found
664 │
╰────
```
but
## ❌ before this PR
```
> std help does-not-exist-anywhere
Help pages from external command does-not-exist-anywhere:
No manual entry for does-not-exist-anywhere
```
without any error, which makes it inconsistent with all the other `std
help` commands which give errors when not finding an item 🤔
## ✔️ with this PR
```
> std help does-not-exist-anywhere
Help pages from external command does-not-exist-anywhere:
No manual entry for does-not-exist-anywhere
Error:
× std::help::item_not_found
╭─[help:740:1]
740 │
741 │ let item = ($item | str join " ")
· ─┬─
· ╰── item not found
742 │
╰────
```
# User-Facing Changes
more consistent errors when using `std help` and `std help commands`, as
shown above.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
```
$nothing
```
related to #8963
cc/ @melMass
# Description
just a little refactoring attempt for `input list` 😌
i wanted to refactor even more, but `Select`, `MultiSelect` and
`FuzzySelect` do not share a common trait, i could not find a nice way
to reduce the big `if` block...
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Must be fixed; (though I'd test it)
Thanks for the reference [fdncred](https://github.com/fdncred).
close#9128
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
related to
https://github.com/nushell/nushell/issues/8588#issuecomment-1538624565
# Description
this PR switches the date and log level in `std log` 👍
# User-Facing Changes
the date and log level are now swapped in the `std log` format.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Must be fixed (but I would check).
I wonder if it was a regression caused by `Value::LazyRecord`.
I mean likely the issue was before the refactoring I did.
close#9130
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Update polars to 0.28.
Luckily, it didn't require major changes.
# User-Facing Changes
None.
(Apart from the fact that certain error messages will stop breaking
table formatting)
# Description
This PR updates `nu-glob` to add the latest changes and updates from
`rust-lang/glob` [v0.3.1](https://github.com/rust-lang/glob).
With these changes you can do this type of globbing
```rust
/// - `?` matches any single character.
///
/// - `*` matches any (possibly empty) sequence of characters.
///
/// - `**` matches the current directory and arbitrary subdirectories. This
/// sequence **must** form a single path component, so both `**a` and `b**`
/// are invalid and will result in an error. A sequence of more than two
/// consecutive `*` characters is also invalid.
///
/// - `[...]` matches any character inside the brackets. Character sequences
/// can also specify ranges of characters, as ordered by Unicode, so e.g.
/// `[0-9]` specifies any character between 0 and 9 inclusive. An unclosed
/// bracket is invalid.
///
/// - `[!...]` is the negation of `[...]`, i.e. it matches any characters
/// **not** in the brackets.
///
/// - The metacharacters `?`, `*`, `[`, `]` can be matched by using brackets
/// (e.g. `[?]`). When a `]` occurs immediately following `[` or `[!` then it
/// is interpreted as being part of, rather then ending, the character set, so
/// `]` and NOT `]` can be matched by `[]]` and `[!]]` respectively. The `-`
/// character can be specified inside a character sequence pattern by placing
/// it at the start or the end, e.g. `[abc-]`.
```
Example - with character sequences
Example - with character sequence negation
Example - normal globbing
Example - with character sequences
Not that, if you're using a character sequence by itself, you need to
enclose it in quotes, otherwise nushell will think it's a range. But if
you already have a type of a bare word already, no quotes are necessary,
as in the last example.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- prettify formatting
- move message formatting to a private function
- allow short prefixes for loggers via `--short|-s` flag
# User-Facing Changes
- allow short prefixes for loggers via `--short|-s` flag
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
this PR makes `std help` commands return a table no matter the number of
matches when using `--find`.
as proposed by Darren, this would allow users to still rely on things
like
```nushell
let blah = (std help modules -f weather | get name)
```
even if there is a single match.
# User-Facing Changes
`std help ... --find ...` now returns a table as `help ... --find ...`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Makes in so if you run `std help <external>` it will run `man <command>`
to get help pages. This command is configurable w/ the `$env.NU_HELPER`
var.
This will close#8032
Examples:
`std help rg` will display the ripgrep help pages
Todo:
- [x] Make flags and fallback configurable
- [x] Improve the warning that it is external
- [ ] Implement `--find` for external commands
# User-Facing Changes
Users will now be able to run `std help` on external commands
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- Log levels are now exported members of `std log`, e.g. `std log
CRITICAL_LEVEL`
- Added `std log custom` command that allows to declare custom message
format (actual message replaces `%MSG%` in the template) with
user-defined log level.
# User-Facing Changes
New possibilities included in description
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
as stated in the `0.79` release note, this PR removes the `old-alias`
and `export old-alias` commands, which were deprecated before.
# User-Facing Changes
`old-alias` is gone for good 😌
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
already mentionned in the `0.79` release note.
# Description
the plan of deprecating `source` never really came to conclusion, so i
propose to move it out of the deprecated commands in this PR.
i've moved it to `nu-command::misc`, which can be changed 👍
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
- highlight directory separators with light green (for regular user) and
light red (for admin) colors respectively
- highlight colons and slashes in the right prompt with light magenta
- underline AM/PM in the right prompt
- use long options to enhance readability
How it looks in MATE Terminal with Tango color theme:
# User-Facing Changes
- highlight directory separators in light green (for regular user) and
red colors (for admin)
- highlight colons and slashes in the right prompt with light magenta
- underline AM/PM in the right prompt
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Currently, error spans for I/O errors in an `rm` invocation always point
to the `rm` argument. This isn't ideal, because the user loses context
as to which “target” actually had a problem:
Shadow the existing `span` variable in outer scope in `rm`'s
implementation for the errors that may be detected while handling I/O
results. This is desired, because all failures from this point are
target-specific, and pointing at the argument that generated the target
instead is better. The end user should now see this:
# User-Facing Changes
* When `rm` encounters I/O errors, their spans now point to the “target”
argument associated with the error, rather than the `rm` token.
# Tests + Formatting
No tests currently cover this. I'm open to adding tests, but adding as
follow-up sounds better ATM, since this wasn't covered before.
# After Submitting
Nothing needs to be done here, AFAIK. No I/O errors are currently
demonstrated in official docs, though maybe they should be?
# Description
Follow-up of #8940. As @bobhy pointed out, it makes sense for the
behaviour of flags to match the one for positional arguments, where
default values are of type `Option<Value>` instead of
`Option<Expression>`.
# User-Facing Changes
The same ones from the original PR:
- Flag default values will now be parsed as constants.
- If the default value is not a constant, a parser error is displayed.
# Tests + Formatting
A [new
test](e34e2d35f4/src/tests/test_engine.rs (L338-L344))
has been added to verify the new restriction.
# Description
Before this PR, `math round` ignores the input if it's an `int`. This
results in the following behaviour:
```
> 123 | math round --precision -1
123
```
When the correct result is 120.
Now `int values` are converted to `float values` before actually
rounding up the number in order to take advantage of the float
implementation.
Fixes#9049.
# Description
The previous behaviour broke for me because I didn't have `sh` in my
path for my nu script. I think we shouldn't assume that just because a
file ends with `.sh` it should be executed with `sh`. `sh` might not be
available or the script might contain a hashbang for a different shell.
The idea with this PR is that nushell shouldn't assume anything about
executable files and just execute them. Later on we can think about how
non-executable files should be executed if we detect they are a script.
# User-Facing Changes
This may break some people's scripts or habits if they have wrong
assumptions about `.sh` files. We can tell them to add a hashbang and +x
bit to execute shell scripts, or prepend `bash`. If this a common
assumption something like this should be added to the book
# Tests + Formatting
I only tested manually and that did work
# After Submitting
Co-authored-by: Jelle Besseling <jelle@bigbridge.nl>
cc/ @fdncred
# Description
in the examples of `std bench` there is an expanded table without
explicitely expanding it...
this PR adds a `table -e` to the `std bench` call in the example.
# User-Facing Changes
the help page of `std bench` now does make sense 😌
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
This PR impacts the nushell sqlite history only.
This is the first PR that enables history isolation in nushell for the
sqlite history. Hopefully, we can continue building on this.
This PR allows "history isolation" which means that other nushell
session's history won't be available in the current session when using
the uparrow/downarrow history navigation. This change only impacts the
uparrow downarrow history navigation.
What remains to be done is making ctrl+r history menu respect this
setting too. Right now, the history menu will still show you all entries
from all sessions.
The history command also shows all history items from all sessions. This
may remain unchanged since you can just filter by history session right
now.
This also fixes a bug where the session id is 0 in the sqlite history
since my April 18th reedline PR.
Closes#9064
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Should close on of the points in
- https://github.com/nushell/nushell/issues/8813
# Description
this PR uses the new `--columns` option for `find` to filter the results
of the `std help` commands on the `usage`, `name` and `search_terms`
columns.
# User-Facing Changes
the `--find` option of `std help` commands should match more closely the
built-in `help` commands output.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Should close on of the points in
- https://github.com/nushell/nushell/issues/8813
# Description
before this PR, we had a problem
```
cargo run -- -c '{
modules: ((help modules | get name) == (std help modules | get name))
aliases: ((help aliases | get name) == (std help aliases | get name))
externs: ((help externs | get name) == (std help externs | get name))
operators: ((help operators | get name) == (std help operators | get name))
commands: ((help commands | get name) == (std help commands | get name))
}'
```
would give
```
╭───────────┬───────╮
│ modules │ false │
│ aliases │ true │
│ externs │ true │
│ operators │ false │
│ commands │ true │
╰───────────┴───────╯
```
this PR removes the `name` sorting so that the orders are the same
between the `std` implementation and the built-in one.
> **Note**
> run the same `cargo run` command as above and see
> ```
> ╭───────────┬──────╮
> │ modules │ true │
> │ aliases │ true │
> │ externs │ true │
> │ operators │ true │
> │ commands │ true │
> ╰───────────┴──────╯
> ```
# User-Facing Changes
the operators in `std help ...` will be sorted just as the built-in
`help ...`.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
Add option that combines both output streams to the `run-external`
command.
This allows you to do something like this:
```nushell
let res = do -i { run-external --redirect-combine <command that prints to stdout and stderr> } | complete
if $res.exit_code != 0 {
# Only print output when command has failed.
print "The command has failed, these are the logs:"
print $res.stdout
}
```
# User-Facing Changes
No breaking changes, just an extra option.
# Tests + Formatting
Added a test that checks the new option
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Co-authored-by: Jelle Besseling <jelle@bigbridge.nl>
# Description
Fix getting the cursor position, when it's at the end of the
commandline.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
# After Submitting
This PR just tidies up some tests by removing unused code:
1. If the filesystem is not touched, don't use the filesystem
playground/sandbox
2. If the filesystem is not touched, don't specify the `cwd`
3. If the command is short, don't bother wrapping it in `pipeline()`
4. If the command doesn't have quotes, don't bother with a `r#"..."#`
raw string
Part of #8670.
# Description
i use `std clip` to copy everything from `nushell`.
however i have the auto-expand on tables enabled and when i use `clip`
on large tables, it does not copy what i see but the collapsed data => i
have to edit the line and add `| table --expand` manually, which is a
pain to do regularly 😱
in this PR, i just add `--expand` to `std clip` to automatically expand
the data before copying it 😋
# User-Facing Changes
exploring the `Cargo.toml` of `nushell` with auto-expand, one might see
```
> open Cargo.toml | get package.metadata.binstall.overrides
╭────────────────────────┬───────────────────╮
│ │ ╭─────────┬─────╮ │
│ x86_64-pc-windows-msvc │ │ pkg-fmt │ zip │ │
│ │ ╰─────────┴─────╯ │
╰────────────────────────┴───────────────────╯
```
but then
```
open Cargo.toml | get package.metadata.binstall.overrides | clip
```
would only copy
```
╭────────────────────────┬──────────────────╮
│ x86_64-pc-windows-msvc │ {record 1 field} │
╰────────────────────────┴──────────────────╯
```
...
now
```
open Cargo.toml | get package.metadata.binstall.overrides | clip --expand
```
will copy the expanded record 👍
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
Should address the first point of
- https://github.com/nushell/nushell/issues/8696.
# Description
i've seen a few appearances of this `benchmark` idea in recent works on
`nu-std`, so i thought it would be great to add it finally.
# User-Facing Changes
a new `std bench` command to measure the performance of `nushell`
closures and code blocks.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
Extends the `extern` syntax to allow commands that accept raw arguments.
This is mainly added to allow wrapper type scripts for external
commands.
This is an example on how this can be used:
```nushell
extern foo [...rest] {
print ($rest | str join ',' )
}
foo --bar baz -- -q -u -x
# => --bar,baz,--,-q,-u,-x
```
(It's only possible to accept a single ...varargs argument in the
signature)
# User-Facing Changes
No breaking changes, just extra possibilities.
# Tests + Formatting
Added a test for this new behaviour and ran the toolkit pr checker
# After Submitting
This is advanced functionality but it should be documented, I will open
a new PR on the book for that
Co-authored-by: Jelle Besseling <jelle@bigbridge.nl>
# Description
The `members` parameter of `use` is specified as type `any`, but it's
really a string or list of strings or `*`. So add some examples that
mention what you can specify for `members`.
Also mention `help modules` and `help std`, since you probably want to
use the standard library or another defined modules.
Sidenote: I tried to run the examples for `use` as tests like is done
for the other commands. That panics with `missing module command`. I
assume this is known.
# User-Facing Changes
`help use` now looks like this:
```nushell
Use definitions from a module, making them available in your shell.
See `help std` for the standard library module.
See `help modules` to list all available modules.
This command is a parser keyword. For details, check:
https://www.nushell.sh/book/thinking_in_nu.html
Usage:
> use <module> (members)
Flags:
-h, --help - Display the help message for this command
Parameters:
module <string>: Module or module file
(optional) members <any>: Which members of the module to import
Examples:
Define a custom command in a module and call it
> module spam { export def foo [] { "foo" } }; use spam foo; foo
foo
Define a custom command that participates in the environment in a module and call it
> module foo { export def-env bar [] { let-env FOO_BAR = "BAZ" } }; use foo bar; bar; $env.FOO_BAR
BAZ
Use a plain module name to import its definitions qualified by the module name
> module spam { export def foo [] { "foo" }; export def bar [] { "bar" } }; use spam; (spam foo) + (spam bar)
foobar
Specify * to use all definitions in a module
> module spam { export def foo [] { "foo" }; export def bar [] { "bar" } }; use spam *; (foo) + (bar)
foobar
To use commands with spaces, like subcommands, surround them with quotes
> module spam { export def 'foo bar' [] { "baz" } }; use spam 'foo bar'; foo bar
baz
To use multiple definitions from a module, wrap them in a list
> module spam { export def foo [] { "foo" }; export def 'foo bar' [] { "baz" } }; use spam ['foo', 'foo bar']; (foo) + (foo bar)
foobaz
```
# Description
This PR bumps the rust toolchain from 1.66.1 to 1.67.1
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously, `par-each` acted like a `flatmap`: first mapping the data,
then applying a `flatten`. This is unlike `each`, which just maps the
data. Now `par-each` works like `each` in this regard, leaving nested
data unflattened.
Fixes#8497
# User-Facing Changes
Previously:
`[1 2 3] | par-each {|e| [$e, $e] }` --> `[1,1,2,2,3,3]`
Now:
`[1 2 3] | par-each {|e| [$e, $e] }` --> `[[1,1],[2,2],[3,3]]`
# Tests
This adds one test that verifies the lack of flattening for `par-each`.
# Description
This PR fixes a problem due to me landing an out of date PR that stopped
nushell from compiling.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
close? #8060
Quite a bit of refactoring took place.
I believe a few improvements to collapse/expand were made.
I've tried to track any performance regressions and seems like it is
fine.
I've noticed something different now with default configuration path or
something in this regard?
So I might missed something while testing because of this.
Requires some oversight.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
I'm still new to nushell and Rust, so please let me know if there are
any omissions and/or mistakes.
# Description
fixed#8863
`$nu` completion shows wrong completion menus at this time.
This PR fixes the problem to show the correct ones.
# User-Facing Changes
Users can use the correct menus on `$nu` completion like this
[recording](https://asciinema.org/a/KCwfpdAoMFsQODFBnb3NwmufC).
# Tests + Formatting
```
$ use toolkit.nu
$ toolkit check pr
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
```
# After Submitting
nothing
# Description
Fixes#8939.
# User-Facing Changes
- Parameter default values will now be parsed as constants.
- If the default value is not a constant, a parser error is displayed.
# Tests + Formatting
The [only affected
test](d42c2b2dbc/src/tests/test_engine.rs (L325-L328))
has been updated to reflect the new behavior.
# Description
follow up to #8529
cleaned up version of #8892
- the original syntax is okay
```nu
def okay [rec: record] {}
```
- you can now add type annotations for fields if you know
them before hand
```nu
def okay [rec: record<name: string>] {}
```
- you can specify multiple fields
```nu
def okay [person: record<name: string age: int>] {}
# an optional comma is allowed
def okay [person: record<name: string, age: int>] {}
```
- if annotations are specified, any use of the command will be type
checked against the specified type
```nu
def unwrap [result: record<ok: bool, value: any>] {}
unwrap {ok: 2, value: "value"}
# errors with
Error: nu::parser::type_mismatch
× Type mismatch.
╭─[entry #4:1:1]
1 │ unwrap {ok: 2, value: "value"}
· ───────┬─────
· ╰── expected record<ok: bool, value: any>, found record<ok: int, value: string>
╰────
```
> here the error is in the `ok` field, since `any` is coerced into any
type
> as a result `unwrap {ok: true, value: "value"}` is okay
- the key must be a string, either quoted or unquoted
```nu
def err [rec: record<{}: list>] {}
# errors with
Error:
× `record` type annotations key not string
╭─[entry #7:1:1]
1 │ def unwrap [result: record<{}: bool, value: any>] {}
· ─┬
· ╰── must be a string
╰────
```
- a key doesn't have to have a type in which case it is assumed to be
`any`
```nu
def okay [person: record<name age>] {}
def okay [person: record<name: string age>] {}
```
- however, if you put a colon, you have to specify a type
```nu
def err [person: record<name: >] {}
# errors with
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #12:1:1]
1 │ def unwrap [res: record<name: >] { $res }
· ┬
· ╰── expected type after colon
╰────
```
# User-Facing Changes
**[BREAKING CHANGES]**
- this change adds a field to `SyntaxShape::Record` so any plugins that
used it will have to update and include the field. though if you are
unsure of the type the record expects, `SyntaxShape::Record(vec![])`
will suffice
# Description
This PR changes the `ast` command to be able to output `--json` as well
as `nuon` (default) with "pretty" and "minified" output. I'm hoping this
functionality will be usable in the vscode extension for semantic
tokenization and highlighting.
# User-Facing Changes
There's a new `--json`/`-j` option. Prior version output of nuon is
maintained as default.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Close: #8988
Thanks to new crossterm version, nushell can support blink cursor shape.
It can be config with the following value:
1. blink_block
2. blink_line
3. blink_underscore
And original block, line, underscore will be steady. It also fixes wrong
shape of `underscore`.
# User-Facing Changes
Here is a little breaking change, before the change: `line` cursor shape
is blinking line, but after this pr, it will be `steady line`. To make a
blink line, we need to change the value to `blink_line`.
But I think it's ok, because after the change, we have a good naming
convention about the name of shape
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Set the initial repl cursor pos, so running `commandline --insert`
inserts at the current cursor position of the input buffer.
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
Tiny fix: clarify in `run-external`'s signature that the external
command must be a string.
### Before
```
Signatures:
<any> | run-external <any> -> <any>
Parameters:
command <any>: external command to run
...args <any>: arguments for external command
```
### After
```
Signatures:
<any> | run-external <string> -> <any>
Parameters:
command <string>: external command to run
...args <any>: arguments for external command
```
### Notes
I was hoping to change more `any`s to more specific types, but alas I
think we can only change `command` right now. The input can be any type
and it gets rendered to a string before being passed to the external.
The args can be any value type and they get converted to strings. The
output can be either binary or a string.
# Description
This does a lookup in the cache of parsed files to see if a span can be
found for a file that was previously loaded with the same contents, then
uses that span to find the parsed block for that file. The end result
should, in theory, be identical but doesn't require any reparsing or
creating new blocks/new definitions that aren't needed.
This drops the sg.nu benchmark from:
```
╭───┬───────────────────╮
│ 0 │ 280ms 606µs 208ns │
│ 1 │ 282ms 654µs 416ns │
│ 2 │ 252ms 640µs 541ns │
│ 3 │ 250ms 940µs 41ns │
│ 4 │ 241ms 216µs 375ns │
│ 5 │ 257ms 310µs 583ns │
│ 6 │ 196ms 739µs 416ns │
╰───┴───────────────────╯
```
to:
```
╭───┬───────────────────╮
│ 0 │ 118ms 698µs 125ns │
│ 1 │ 121ms 327µs │
│ 2 │ 121ms 873µs 500ns │
│ 3 │ 124ms 94µs 708ns │
│ 4 │ 113ms 733µs 291ns │
│ 5 │ 108ms 663µs 125ns │
│ 6 │ 63ms 482µs 625ns │
╰───┴───────────────────╯
```
I was hoping to also see some startup time improvements, but I didn't
notice much there.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
As described in #8893, switch `std run-tests --module` is ambiguous, but
`--command` is misleading. Fix that, and rename `--list` output column
to match.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* `std run-tests --command test_foo_1` changes to `std run-tests --test
test_foo_1`, users may have to change existing scripts (or muscle
memory).
*
```
〉std run-tests --list | columns
╭───┬────────╮
│ 0 │ module │
│ 1 │ name │
│ 2 │ file │
╰───┴────────╯
```
Changes to:
```
〉std run-tests --list | columns
╭───┬────────╮
│ 0 │ module │
│ 1 │ test │
│ 2 │ file │
╰───┴────────╯
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
this pr condenses `MutBuiltinVar`, `LetBuiltinVar` and `ConstBuiltinVar`
into one error:
```nu
Error: nu::parser::name_is_builtin_var
× `in` used as variable name.
╭─[entry #69:1:1]
1 │ let in = 420
· ─┬
· ╰── already a builtin variable
╰────
help: 'in' is the name of a builtin Nushell variable and cannot be used
as a variable name
```
it also fixes this case which was previously not handled
```nu
let $nu = 420 # this variable would have been 'lost'
```
# Description
this PR fixes the `std clip` command which would not copy integer data
😮
and, as all the input data is now treated as raw `string` with the
`table | into string` conversion, i've removed the "stripped" print when
done clipping the data 👍❌ from the `main` on which this PR is based (cbedc8403)
> **Note**
> from inside`cargo run` and with a `use std clip`
- ✔️ `'foo' | clip`
- ✔️ `ls | get 0 | clip`
- ❌ `123 | clip`
# User-Facing Changes
✔️ from the tip of the PR branch
> **Note**
> from inside`cargo run` and with a `use std clip`
- ✔️ `'foo' | clip`
- ✔️ `ls | get 0 | clip`
- ✔️ `123 | clip`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
This PR allows the `find` command to search in specific columns using
`--columns [col1 col2 col3]`. This is really meant to help with the
`help` command in the std.nu.
There are a few more things I want to look at so this is a draft for
now.
- [x] add example
- [x] look at regex part
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously variables with `let-env` were not available after doing an
`exec` command. This PR fixes that
# User-Facing Changes
Can now use environment variables set with nushell after `exec`
# Tests + Formatting
No tests made but formatting has been checked
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Co-authored-by: Jelle Besseling <jelle@bigbridge.nl>
## Description
just a little refactor of `CONTRIBUTING.md` of the standard library in
`nu-std`.
- see the new version
[here](https://github.com/amtoine/nushell/blob/stblib/refactor/CONTRIBUTING-guidelines/crates/nu-std/CONTRIBUTING.md).
> **Note**
> actually, that one might be best reviewed commit by commit 😋
> i tried to be as explicit as possible 😌
- i fixed the width to `80` columns
- cc/ @bobhy, if you want to jump in and find broken links / bad changes
# Description
This PR fixes the breaking changes to the reedline API due to
https://github.com/nushell/reedline/pull/562. It does not implement any
new features but just gets nushell back to compiling again.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Trying a few different things to hopefully speedup startup a bit. I'm
seeing some improvement on my box for the profiles I have, but the data
I'm seeing is noisy.
- Remove allocations in a few places where we created vec's but could
use iterators
- Pre-allocate space for blocks based on the lite block
- Removed a few extra clones
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Replaces #8824, which was languishing in review limbo and becoming
increasingly difficult to keep current with upstream changes.
In addition to all the edits, this PR includes updated documentation for
running unit tests via `std run-tests`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
A CONTRIBUTING.md documenting guidelines and getting started info for
potential stdlib contributors.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR allows our custom commands to show up in `$nu.scope.commands`
better. It still needs work because this PR hard code the input and
output types as `Type::Any` but the reason they're being missed in the
first place is that they are not assigned an input and output type.
This allows things like this now. Note the `where is_custom == true`
Another example.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This should be a little more efficient when running the algorithm to
find the captured variables.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Make `$in` takes cell path in `update` command
The reason behind the change:
https://discord.com/channels/601130461678272522/615329862395101194/1088405671080370196
> when i use update on some cell path, it's almost always because i want
to start with its previous value and change it.
cc @amtoine
# User-Facing Changes
## Before
```
open Cargo.toml | get package | update metadata.binstall.pkg-fmt {|| $in.metadata.binstall.pkg-fmt | str replace "g" "FOO"}
```
## After
```
open Cargo.toml | get package | update metadata.binstall.pkg-fmt {|| str replace "g" "FOO"}
```
If use want to access original raw, it can be accessed by parameters in
closure:
```
open Cargo.toml | get package | update metadata.binstall.pkg-fmt {|$it| $it.metadata.binstall.pkg-fmt | str replace "g" "FOO"}
```
For this reason, I don't think we need to add a flag like `--whole`
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_Fixes #5923_
Currently `nushell` doesn't allow short flag batches to contain
arguments, despite this being a common pattern in commands like `git
commit -am 'My commit message'`. This PR relaxes this so that the last
flag in the batch can take an argument.
# User-Facing Changes
- `nu::parser::short_flag_arg_cant_take_arg` has been replaced by
`nu::parser::only_last_flag_in_batch_can_take_arg` and is displayed when
a flag other then the last in a short flag batch takes an argument.
# Tests + Formatting
- Both
[`test_parser.rs`](48af0ebc3c/crates/nu-parser/tests/test_parser.rs (L640-L704))
and
[`test_known_external.rs`](48af0ebc3c/src/tests/test_known_external.rs (L42-L61))
have been updated to test the new allowed and disallowed scenarios.
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
This PR adds an `items` command which allows the user to iterate over
both `columns` and `values` of a `Record<>` type at the same time.
# User-Facing Changes
No breaking changes, only a new `items` command.
# Formatting
- `cargo fmt --all -- --check` 👌
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` 👌
- `cargo test --workspace` 👌
# Description
Follow up to #8849
Work for #8821
Should unblock work on #8808
Missing is a restriction to printables or identifiers according to
[UAX31](https://www.unicode.org/reports/tr31/)
# User-Facing Changes
Non ASCII characters should be allowed in shortflags.
# Tests + Formatting
Want to add some tests for the error reporting cases
Move test runner to standard library.
Originated from #8819
# After Submitting
I'll update the documentation about testing:
http://www.nushell.sh/book/testing.html
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
# Description
Fixes: #8260
# User-Facing Changes
`open bigfile | hash md5` no longer consumes too much memory
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, enable trash flag on all platforms make `rm` more portable
across different platforms, but `-t` will do nothing.
Fixes: #8104
# User-Facing Changes
Na
# Tests + Formatting
It's hard to add tests because we don't run tests for android and ios
platforms.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
i was playing with my theme a bit and i was thinking about the following
- the default themes should not use precise colors
- the default themes should let the terminal set the exact colors
for instance, the `filesize` field of the `$env.config.color_config`
looks good but not with terminal themes like dracula or tokyonight
😮
in this PR, i just use "built-in" colors, like `red` or `yellow_bold` or
`{fg: green attr: n}` to let the terminal theme set the colors 😋
# User-Facing Changes
i tried to stay as close as the previous default themes, so there should
be the least amount of differences 😌
# Tests + Formatting
```
$nothing
```
# After Submitting
```
$nothing
```
# Description
This adds multi-file support to the in-progress IDE support. The main
new features are a `-I` flag that allows you to add a new source search
path when starting up the nu binary, and fixes for the current IDE
support to support spans in other files.
This needs accompanying fixes to the vscode/lsp implementation to pass
along the project directory via `-I`.
UPDATE: Marking this draft until we have a means to test this.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This relaxes the closure syntax so that `||` is no longer required. This
allows for `ls | each { $in.name }` for example.
I've gone ahead and changed the syntax highlighting so that blocks and
closures are distinct for now.
# User-Facing Changes
Removes `||` requirement for closures.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This effectively reverts #8635. We shipped this change with 0.78 and
received many comments/issues related to this restriction feeling like a
step backward.
fixes: #8844
(and probably other issues)
# User-Facing Changes
Returns numbers and number-like values to being allowed to be bare
words. Examples: `3*`, `1fb43`, `4,5`, and related.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Hey I'm a developer and I'm still new to nushell and rust but I would
like to learn more about both. This is my first PR for this project.
The intent of my change is to allow to use multibyte utf-8 characters in
commands short flags.
# Description
As in other testing frameworks, the `setup` runs before every test case,
and the `teardown` after that. A context can be created in `setup`,
which will be in the `$in` variable in the test cases, and in the
`teardown`. The `teardown` is called regardless of the test is passed,
skipped, or failed.
For example:
```nushell
use std.nu *
export def setup [] {
log debug "Setup is running"
{msg: "This is the context"}
}
export def teardown [] {
log debug $"Teardown is running. Context: ($in)"
}
export def test_assert_pass [] {
log debug $"Assert is running. Context: ($in)"
}
export def test_assert_skip [] {
log debug $"Assert is running. Context: ($in)"
assert skip
}
export def test_assert_fail_skipped_by_default [] {
log debug $"Assert is running. Context: ($in)"
assert false
}
```
# After Submitting
I'll update the documentation.
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
# Description
This PR fixes
`commands::str_::substrings_the_input_and_treats_end_index_as_length_if_blank_end_index_given`
testcase on 32-bit platform.
```
failures:
---- commands::str_::substrings_the_input_and_treats_end_index_as_length_if_blank_end_index_given stdout ----
=== stderr
thread 'commands::str_::substrings_the_input_and_treats_end_index_as_length_if_blank_end_index_given' panicked at 'assertion failed: `(left == right)`
left: `"arepa"`,
right: `"arepas"`', crates/nu-command/tests/commands/str_/mod.rs:363:9
failures:
commands::str_::substrings_the_input_and_treats_end_index_as_length_if_blank_end_index_given
test result: FAILED. 1072 passed; 1 failed; 23 ignored; 0 measured; 0 filtered out; finished in 2.98s
error: test failed, to rerun pass `-p nu-command --test main`
```
https://gitlab.alpinelinux.org/nibon7/aports/-/jobs/1005935#L3864https://gitlab.alpinelinux.org/nibon7/aports/-/jobs/1005931#L3867
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
> **Note**
> waiting for the following to land
> - https://github.com/nushell/nushell/pull/8824 to avoid conflicts,
i'll add this to `CONTRIBUTING.md` once it's ready 👍
should close#8839
# Description
this PR moves the `log` submodule of `std` to the top of the call stack,
making it available in the rest of the library as `log`.
i've added some comments around the `submodules` list in
`load_standard_library` to make it clear how it should work.
# User-Facing Changes
`log` and `assert` are now available in the rest of `std`.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
It's an addition to https://github.com/nushell/nushell/pull/8618
And I think it's good to keep the same behavior when we use for loop for
list.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The old comment around the question mark operator doesn't make sense
to me based on the closure signature.
The `match` expressions were thus superfluous.
# User-Facing Changes
None
# Tests + Formatting
No change
> **Note**
> waiting for
> - https://github.com/nushell/nushell/pull/8770
> - #8815
# Description
this PR adds a very basic completion support to the `help`
implementations of the `std`.
# User-Facing Changes
completion on all the `std help ...` commands, based on the names in
`$nu.scope.`
# Tests + Formatting
- ⚫ `toolkit fmt`
- ⚫ `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
Part of the larger cratification effort.
Moves all `reedline` or shell line editor specific commands to `nu-cli`.
## From `nu-cmd-lang`:
- `commandline`
- This shouldn't have moved there. Doesn't directly depend on reedline
but assumes parts in the engine state that are specific to the use of
reedline or a REPL
## From `nu-command`:
- `keybindings` and subcommands
- `keybindings default`
- `keybindings list`
- `keybindings listen`
- very `reedline` specific
- `history`
- needs `reedline`
- `history session`
## internal use
Instead of having a separate `create_default_context()` that calls
`nu-command`'s `create_default_context()`, I added a `add_cli_context()`
that updates an `EngineState`
# User-Facing Changes
None
## Build time comparison
`cargo build --timings` from a `cargo clean --profile dev`
### total
main: 64 secs
this: 59 secs
### `nu-command` build time
branch | total| codegen | fraction
---|---|---|---
main | 14.0s | 6.2s | (44%)
this | 12.5s | 5.5s | (44%)
`nu-cli` depends on `nu-command` at the moment.
Thus it is built during the code-gen phase of `nu-command` (on 16
virtual cores)
# Tests + Formatting
I removed the `test_example()` facilities for now as we had not run any
of the commands in an `Example` test and importing the right context for
those tests seemed more of a hassle than the duplicated
`test_examples()` implementations in `nu-cmd-lang` and `nu-command`
this adds a `--no-std-lib` flag. Moves `nu!` to use the `--no-std-lib`.
Adds a new `nu_with_std!` macro for future tests that need the std-lib.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
We were seeing duplicate entries for the std lib files, and this PR
addresses that. Each file should now only be added once.
Note: they are still parsed twice because it's hard to recover the
module from the output of `parse` but a bit of clever hacking in a
future PR might be able to do that.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
this pr allows `register` to be used with const variables
```nu
const math_plugin = "~/.config/nushell/plugins/nu_plugin_math"
register $math_plugin
```
should close#8208, previous work #8435
Should close#8809.
# Description
this PR uses the automatically loaded library from the tests by
replacing `use std.nu ...` with `use std ...`.
the `README` has been updated by
- removing the very deprencated "concrete examples"
- fixing the `use std` and the "run the tests" sections
the `README` can be previewed
[here](https://github.com/amtoine/nushell/blob/refactor/stdlib/use-std-in-tests-and-update-readme/crates/nu-std/README.md)
👍
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `toolkit test stdlib`
# After Submitting
```
$nothing
```
now nu_std only depends on nu_parser, nu_protocol and miette
and removes the nu_cli dependency
this enables developers moving forward to come along and implement their
own CLI's without having to pull in a redundant nu-cli which will not be
needed for them.
I did this by moving report_error into nu_protocol
which nu_std already has a dependency on anyway....
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
related to #8765.
should close#8812.
# Description
this PR simply removes the `prinln("MODULE NOT FOUND")` from the parser.
# User-Facing Changes
no more `MODULE NOT FOUND` while typing a `use` command
# Description
This improves the operation mismatch error in a few ways:
* We now detect if the left-hand side of the operation is at fault, and
show a simpler error/error message if it is
* Removed the unhelpful hint
* Updated the error text to make it clear what types are causing the
issue
# User-Facing Changes
Error texts and spans will change
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
as we now have a prelude thanks to #8627, i'd like to work on the
structure of the library 😋
and i think the first step is to make it a true standalone crate 😏
this PR
- moves all the library from `crates/nu-utils/standard_library/` to
`crates/nu-std/`
- moves the `rust` loading code from `src/run.rs` to
`crates/nu-std/src/lib.rs`
# Description
This fixes the parser recovery after the first error (at least the main
culprit), where `parse_value` was not able to properly parse `any`
values after the first error.
fixes#8796
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Part solving #8752
Adds an extra variable to the `nu` table `current-exe` which is the path
to the running shell executable.
# User-Facing Changes
Adds a variable to the `nu` table.
# Tests + Formatting
Tests and formatting have been run. No new test added
# After Submitting
I could add documentation for this if wanted
Co-authored-by: Jelle Besseling <jelle@bigbridge.nl>
# Description
fixed#8755
Now, command `config {nu,env}` opens default file
`.config/nushell/{config,env}.nu`.
This behavior is inappropriate when `nu` is launched with option
`--config` or `--env-config`.
This PR changes the file that the command opens to
`$nu.{config,env}-file`.
# User-Facing Changes
`config {nu,env}` opens `$nu.{config,env}-file`.
# Description
Verified on discord with maintainer
Change adds regex separators in split rows/column/list. The primary
motivating reason was to make it easier to split on separators with
unbounded whitespace without requiring a lot of trim jiggery. But,
secondary motivation is the same as the set of all motivations for
adding split regex features to most languages.
# User-Facing Changes
Adds -r option to split rows/column/list.
# Tests + Formatting
Ran tests, however tests.nu fails with unrelated errors:
```
~/src/nushell> cargo run -- crates/nu-utils/standard_library/tests.nu 04/02/2023 02:07:25 AM
Finished dev [unoptimized + debuginfo] target(s) in 0.24s
Running `target/debug/nu crates/nu-utils/standard_library/tests.nu`
INF|2023-04-02T02:07:27.060|Running tests in test_asserts
INF|2023-04-02T02:07:27.141|Running tests in test_dirs
Error:
× list is just pwd after initialization
INF|2023-04-02T02:07:27.167|Running tests in test_logger
INF|2023-04-02T02:07:27.286|Running tests in test_std
Error:
× some tests did not pass (see complete errors above):
│
│ test_asserts test_assert
│ test_asserts test_assert_equal
│ test_asserts test_assert_error
│ test_asserts test_assert_greater
│ test_asserts test_assert_greater_or_equal
│ test_asserts test_assert_length
│ test_asserts test_assert_less
│ test_asserts test_assert_less_or_equal
│ test_asserts test_assert_not_equal
│ ⨯ test_dirs test_dirs_command
│ test_logger test_critical
│ test_logger test_debug
│ test_logger test_error
│ test_logger test_info
│ test_logger test_warning
│ test_std test_path_add
│
```
Upon investigating seeing this difference:
```
╭───┬─────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ 0 │ /var/folders/1f/ltbr1m8s5s1811k6n1rhpc0r0000gn/T/test_dirs_c1ed89d6-19f7-47c7-9e1f-74c39f3623b5 │
│ 1 │ /private/var/folders/1f/ltbr1m8s5s1811k6n1rhpc0r0000gn/T/test_dirs_c1ed89d6-19f7-47c7-9e1f-74c39f3623b5 │
╰───┴─────────────────────────────────────────────────────────────────────────────────────────────────────────╯
```
This seems unrelated to my changes, but can investigate further if
desired.
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Robert Waugh <robert@waugh.io>
# Description
A compromise fix for #8162. Nushell range operator now accepts `..=` to
mean the range includes the top value, so you can use your Rust habits.
But the unadorned `..` range operator also includes the value, so you
can also use your Nushell habits.
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
```nushell
〉1..5
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
│ 4 │ 5 │
╰───┴───╯
-------------------------------------------- /home/bobhy/src/rust/nushell --------------------------------------------
〉1..=5
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
│ 4 │ 5 │
╰───┴───╯
-------------------------------------------- /home/bobhy/src/rust/nushell --------------------------------------------
〉1..<5
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 4 │
╰───┴───╯
```
# User-Facing Changes
Existing scripts with range operator will continue to operate as
heretofore.
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
Will update the book to include new syntax.
# Description
This is a pretty heavy refactor of the parser to support multiple parser
errors. It has a few issues we should address before landing:
- [x] In some cases, error quality has gotten worse `1 / "bob"` for
example
- [x] if/else isn't currently parsing correctly
- probably others
# User-Facing Changes
This may have error quality degradation as we adjust to the new error
reporting mechanism.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
<!--
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
-->
Recently a few things changed, which now create issues:
- `1.0.0`, `+500`, and `0x000000` used to get parsed as string, but now
just errors
- `each { print $in }` -> `each {|| print $in }`
I looked through all the help pages and fixed every highlighted (red
background) error: `help commands | each {|i| help $i.name} | table |
less`
# User-Facing Changes
<!--
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
-->
The examples work again and no longer contain error syntax-highlighting
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!--
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Should close#8704.
# Description
this PR
- makes the error thrown by things like `ansi -e {invalid: "invalid"}`
more explicit
- makes the `ansi -e` example more explicit about valid / invalid keys
# User-Facing Changes
the error
```bash
> ansi -e {invalid: "invalid"}
Error: nu:🐚:incompatible_parameters
× Incompatible parameters.
╭─[entry #1:1:1]
1 │ ansi -e {invalid: "invalid"}
· ──────────┬─────────
· ╰── unknown ANSI format key: expected one of ['fg', 'bg', 'attr'], found 'invalid'
╰────
```
the new `ansi -e` example
```bash
Use structured escape codes
> let bold_blue_on_red = { # `fg`, `bg`, `attr` are the acceptable keys, all other keys are considered invalid and will throw errors.
fg: '#0000ff'
bg: '#ff0000'
attr: b
}
$"(ansi -e $bold_blue_on_red)Hello Nu World(ansi reset)"
Hello Nu World
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
# After Submitting
```
$nothing
```
# Description
This adds a set of new flags on the `nu` binary intended for use in
IDEs. Here is the set of supported functionality so far:
* goto-def - go to the definition of a variable or custom command
* type hints - see the inferred type of variables
* check - see the errors in the document (currently only one error is
supported)
* hover - get information about the variable or custom command
* complete - get a completion list at the current position
# User-Facing Changes
No changes to the REPL experience. This only impacts the IDE scenario.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Add `xaccess`,`xupdate` and `xinsert` scripts to standard library. They
allow accessing and manipulating data in new xml format
https://github.com/nushell/nushell/pull/7947 with relative ease.
Access some data in nushell xml structure:
Update attributes of xml tags matching a path:
# User-Facing Changes
New commands `std xaccess`, `std xupdate` and `std xinsert`
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Should close the associated poin in #8311
# Description
this PR adds a `clip` command to `std` which
- has error support in case the clipboard system command is not
installed
- removes any ANSI escape sequences from the input to have a clean
copied text
- can throw desktop notifications on linux in case of a long pipeline
which needs to be copied (can be disabled with `--no-notify`)
- echoes the copied data to the output of the terminal (can be disabled
with --silent)
- has examples and dependencies listed
- has "charpage" 65001 (a.k.a. utf-8) support for windows
## new additions from 9cd3c951f to
ad3e8de25b
- better OS context error support
- use of the `match` statement for scalability
- `match` the value of the `$nu.os-info.name`
- add `macOS` with `pbcopy` to the list of supported systems
- throw an error when the OS is not supported
- ~~add simple tests to make sure `clip` works on all main OSes with the
CI~~ had to be removed in 6028b98483 (see
[the failing
test](https://github.com/nushell/nushell/actions/runs/4610091544/jobs/8148126550?pr=8695#step:6:35))
# User-Facing Changes
users can now access a `clip` to copy the output of any pipeline to the
system clipboard, on any system
# Tests + Formatting
```
$nothing
```
# After Submitting
```
$nothing
```
# Description
i've always found the `ansi --help` extra usage hard to read and
understand...
i decided to give it a shot today, so here is what i came up 😋
- make the extra usage structured with `nushell` tables
- make the examples clearer with variables and comments
one change that might appear strange is the following last two commits
```diff
diff --git a/crates/nu-command/src/platform/ansi/ansi_.rs b/crates/nu-command/src/platform/ansi/ansi_.rs
index 4746d27fa..ba3e597c4 100644
--- a/crates/nu-command/src/platform/ansi/ansi_.rs
+++ b/crates/nu-command/src/platform/ansi/ansi_.rs
@@ -507,10 +507,7 @@ impl Command for AnsiCommand {
fn signature(&self) -> Signature {
Signature::build("ansi")
- .input_output_types(vec![
- (Type::Nothing, Type::String),
- (Type::List(Box::new(Type::String)), Type::String),
- ])
+ .input_output_types(vec![(Type::Nothing, Type::String)])
.optional(
"code",
SyntaxShape::Any,
```
`ansi` is never used on `list` inputs, as can be seen in the `Ansi.run`
function: `_input: PipelineData` is never used.
this broke the tests (see [this
action](https://github.com/nushell/nushell/actions/runs/4589552235/jobs/8104520078#step:4:1392))
for no real reason...
# User-Facing Changes
hopefully an easier to read `help ansi` page.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds the `ppid` field that's available on all supported platforms to the
`ps` command. This would be useful in my scripts.
# User-Facing Changes
- ps output now contains an extra column
# Tests + Formatting
Not sure if I need to add a test for this
# After Submitting
Update https://www.nushell.sh/book/quick_tour.html#quick-tour to show
the new table
# Description
fixed#8655
Change default nushell configuration file `default_env.nu` to display
LAST_EXIT_CODE in the prompt. For this change, users can quickly know
that a previous command failed.
# User-Facing Changes
This change affects only users who use the default configuration.
When a command fails, the exit code is displayed in the prompt like
these figures.
* before
* after
# Tests + Formatting
When I ran tests, `test.nu` failed with the following error.
The error also occurs in the master branch, so it's probably unrelated
to these changes.
Do I need to address it?
* `cargo fmt --all -- --check`: passed
* `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect`: passed
* `cargo test --workspace`: passed
* `cargo run -- crates/nu-utils/standard_library/tests.nu`: ~failed~
passed
```
~/oss_dev/nushell> cargo run -- crates/nu-utils/standard_library/tests.nu
Finished dev [unoptimized + debuginfo] target(s) in 0.15s
Running `target/debug/nu crates/nu-utils/standard_library/tests.nu`
Error: nu:🐚:external_command
× External command failed
╭─[/home/hiroki/oss_dev/nushell/crates/nu-utils/standard_library/tests.nu:73:1]
73 │ | upsert test {|module|
74 │ nu -c $'use ($module.file) *; $nu.scope.commands | select name module_name | to nuon'
· ─┬
· ╰── did you mean 'du'?
75 │ | from nuon
╰────
help: No such file or directory (os error 2)
```
# After Submitting
nothing
# Description
Version bump for the `0.78.0`
Start to include the version with our `default_config.nu` and
`default_env.nu`
# Checklist
- [x] reedline
- [ ] release notes
# Description
This PR aims to cover the tests under nu-command as part of this issue
#8670 to clean up any unnecessary wrapping funcs like `cwd(".")` or
`pipeline()`, etc.
This PR is still WIP and opening as draft to get first impressions and
feedback on a few tests before I go on changing more.
# User-Facing Changes
None
# Tests + Formatting
None
# After Submitting
None
---------
Signed-off-by: Harshal Chaudhari <harshal.chaudhary@gmail.com>
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Before:
```
× Type mismatch during operation.
╭─[source:1:1]
1 │ def 7zup [] {}
· ──┬─
· ╰── expected string
╰────
```
Now:
```
× Type mismatch during operation.
╭─[source:1:1]
1 │ def 7zup [] {}
· ──┬─
· ╰── expected string, found number-like value (hint: use quotes or backticks)
╰────
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Prevents redefining fields in a record, for example `{a: 1, a: 2}` would
now error.
fixes https://github.com/nushell/nushell/issues/8699
# User-Facing Changes
Is technically a breaking change. If you relied on this behaviour to
give you the last value, your code will now error.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Should close https://github.com/nushell/nushell/issues/8698 and similar
issues.
# Description
simply moves the `show_banner` field and its comment to the top of the
default config file.
# User-Facing Changes
this should make the setting easier to see and encourage people to
modify the line instead of adding another line before the default
`show_banner: true`, which would overwrite the setting.
# Tests + Formatting
```
$nothing
```
# After Submitting
the default banner links to
https://www.nushell.sh/book/configuration.html#remove-welcome-message,
which does not mention this issue => this will have to be updated
# Description
I copied the `math ln` command and replaced the relevant parts to
implement `math exp`.
# User-Facing Changes
The `math exp` command was added. Now one can do `[1, 2, 3] | math exp`
to get e to the power of these numbers.
# Tests + Formatting
I only wrote example tests, same as for `math ln`, which also does not
have special tests. I have ran into an issue with the tests but it seems
completely unrelated (see #8687)
# After Submitting
This PR was done in order to make the documentation complete, so I'm not
adding any documentation except `math ln`.
This PR makes `?` work with `reject`. For example:
```bash
> {} | reject foo
Error: nu:🐚:column_not_found
× Cannot find column
╭─[entry #2:1:1]
1 │ {} | reject foo
· ───┬── ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
> {} | reject foo?
╭──────────────╮
│ empty record │
╰──────────────╯
```
This was prompted by [a user
question](https://discord.com/channels/601130461678272522/614593951969574961/1091466428546306078).
I would like to get this in for 0.78, I think it's low-risk and I want
the `?` feature to be as polished as possible for its debut.
# Description
Whilst working on [Allow parsing of mu (µ) character for
durations](https://github.com/nushell/nushell/pull/8647), I found a bug
where, if you use `into duration --convert us`, it outputs with the unit
as `us` rather than `µs`
After this change, it now outputs the correct symbol:
# User-Facing Changes
User will now see correct unit when converting into microseconds.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fully deprecates `str collect`. It's been "half-deprecatd" for a
long time. This takes it all the way and disallows the command in favor
of `str join`.
# User-Facing Changes
No more `str collect`
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The two tests `to_nuon_from_nuon` and `to_nuon_from_nuon_string` were
taking multiple seconds and have since been superseded by more explicit
unit tests. Compared to the time cost for devs and CI they seldomly
returned explicit problems. One failure only popped up after months, as
a sampled failure (https://github.com/nushell/nushell/pull/7564).
# User-Facing Changes
none
# Tests + Formatting
Fuzzing should move to a separate worker and be removed from the main
test suite.
See #8575 for experimentation around the impact on our test coverage.
# Description
Adds two more patterns when working with lists:
```
[1, ..$remainder]
```
and
```
[1, ..]
```
The first one collects the remaining items and assigns them into the
variable. The second one ignores any remaining values.
# User-Facing Changes
Adds more capability to list pattern matching.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR allows you to control the amount of threads that `par-each` uses
via a `--threads(-t)` parameter. When no threads parameter is specified,
`par-each` uses the default, which is the same number of available CPUs
on your system.
closes#4407
# User-Facing Changes
New parameter
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is to resolve the issue
[8614](https://github.com/nushell/nushell/issues/8614).
It allows the parsing of the mu (µ) character for durations, so you can
type `10µs`, and it correctly outputs, whilst maintaining the current
`us` parsing as well.
It also forces `durations` to be entered in lower case.
(The bottom one `1sec | into duration --convert us` looks like an
existing bug, where converting to `us` outputs `us` rather than `µs`)
# User-Facing Changes
Allows the user to parse durations in µs
Forces `durations` to be entered in lower case rather than any case, and
will error if not in lower case.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
This PR fixes a small bug where `inspect` was panicking because the data
returned was larger than that terminal size.
Closes#8671Closes#8674
# User-Facing Changes
No more panic
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Currently, all four of these commands return a (rather-confusing)
spanless error when passed an empty list:
```
> [] | sort
Error:
× no values to work with
help: no values to work with
```
This PR changes these commands to always output `[]` if the input is
`[]`.
```
> [] | sort
╭────────────╮
│ empty list │
╰────────────╯
> [] | uniq-by foo
╭────────────╮
│ empty list │
╰────────────╯
```
I'm not sure what the original logic was here, but in the case of `sort`
and `uniq`, I think the current behavior is straightforwardly wrong.
`sort-by` and `uniq-by` are a bit more complicated, since they currently
try to perform some validation that the specified column name is present
in the input (see #8667 for problems with this validation, where a
possible outcome is removing the validation entirely). When passed `[]`,
it's not possible to do any validation because there are no records.
This opens up the possibility for situations like the following:
```
> [[foo]; [5] [6]] | where foo < 3 | sort-by bar
╭────────────╮
│ empty list │
╰────────────╯
```
I think there's a strong argument that `[]` is the best output for these
commands as well, since it makes pipelines like `$table | filter
$condition | sort-by $column` more predictable. Currently, this pipeline
will throw an error if `filter` evaluates to `[]`, but work fine
otherwise. This makes it difficult to write reliable code, especially
since users are not likely to encounter the `filter -> []` case in
testing (issue #5957). The only workaround is to insert manual checks
for an empty result. IMO, this is significantly worse than the "you can
typo a column name without getting an error" problem shown above.
Other commands that take column arguments (`get`, `select`, `rename`,
etc) already have `[] -> []`, so there's existing precedent for this
behavior.
The core question here is "what columns does `[]` have"? The current
behavior of `sort-by` is "no columns", while the current behavior of
`select` is "all possible columns". Both answers lead to accepting some
likely-buggy code without throwing on error, but in order to do better
here we would need something like `Value::Table` that tracks columns on
empty tables.
If other people disagree with this logic, I'm happy to split out the
`sort-by` and `uniq-by` changes into another PR.
# User-Facing Changes
`sort`, `uniq`, `sort-by`, and `uniq-by` now return `[]` instead of
throwing an error when input is `[]`.
# After Submitting
> If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
The existing behavior was not documented, and the new behavior is what
you would expect by default, so I don't think we need to update
documentation.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
Related to #8653.
# Description
This PR removes the redundant `path expand`s introduced in #8552 and
#8576.
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
the tests still pass on linux.
# After Submitting
```
$nothing
```
This PR fixes a bug introduced in
https://github.com/nushell/nushell/pull/8571.
We were accidentally converting a `Result<Value, ShellError>` to JSON
instead of converting a `Value`. The upshot was that we were sending
JSON like `{"Ok":{"foo":"bar"}}` instead of `{"foo":"bar"}`.
This was an easy bug to miss, because `ureq::send_json()` accepts any
`impl serde::Serialize`. I've added a test to prevent regression.
# Description
I recently ran into an issue where one of the $nu paths was not expanded
and was causing issue because $env.PWD did not equal $nu.temp-path, even
though I was in $nu.temp-path. The reason it didn't match was because my
temp path was symlinked. This PR fixes that issue by expanding the paths
with canonicalize_with().
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This removes all the old style of quasi-ranges before we had full range
support from `str substring`. Functionality should otherwise work, but
only with the official range syntax.
# User-Facing Changes
Removes the array and string forms of ranges from `str substring`.
Leaves only the official range support for range values.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This allows for type inference to infer record types in more cases. The
only time we will now fall back to `Any` is when one of the fields has a
computed value.
I also updated the type mismatch error and highlighting to be in-line
with other errors.
# User-Facing Changes
This may result in stricter type checking. Previously `{}` had the
inferred type `Any` but will now have the correct inferred type of
`Record<>`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR fixes `select` when given an empty list; it used to return
`null` when given an empty list. I also cleaned up other `select` tests
while I was in the area.
### Before:
```
> [] | select a | to nuon
null
```
### After:
```
> [] | select a | to nuon
[]
```
It looks like the previous behaviour was accidentally introduced by
[this PR](https://github.com/nushell/nushell/pull/7639).
Related to #8150, #8635 and #8632.
# Description
i've introduced a bad set of tests for the `assert equal` command in
#8150...
they should not compare `1 + 2` and `4)` or `3)` but the ints.
in this PR, i remove this spurious parentheses that were not planned at
all 😬👀
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
```
>_ nu crates/nu-utils/standard_library/tests.nu
INF|2023-03-28T20:18:13.022|Running tests in test_asserts
INF|2023-03-28T20:18:13.173|Running tests in test_dirs
INF|2023-03-28T20:18:13.247|Running tests in test_logger
INF|2023-03-28T20:18:13.473|Running tests in test_std
```
# After Submitting
```
$nothing
```
# Description
This should give a slightly better error if a position expects a string
and the user writes a number-like value.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Require that any value that looks like it might be a number (starts with
a digit, or a '-' + digit, or a '+' + digits, or a special form float
like `-inf`, `inf`, or `NaN`) must now be treated as a number-like
value. Number-like syntax can only parse into number-like values.
Number-like values include: durations, ints, floats, ranges, filesizes,
binary data, etc.
# User-Facing Changes
BREAKING CHANGE
BREAKING CHANGE
BREAKING CHANGE
BREAKING CHANGE
BREAKING CHANGE
BREAKING CHANGE
BREAKING CHANGE
BREAKING CHANGE
Just making sure we see this for release notes 😅
This breaks any and all numberlike values that were treated as strings
before. Example, we used to allow `3,` as a bare word. Anything like
this would now require quotes or backticks to be treated as a string or
bare word, respectively.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds `|` patterns to `match`, allowing you to try multiple patterns for
the same case.
Example:
```
match {b: 1} { {a: $b} | {b: $b} => { print $b } }
```
Variables that don't bind are set to `$nothing` so that they can be
later checked.
This PR also:
fixes#8631
Creates a set of integration tests for pattern matching also
# User-Facing Changes
Adds `|` to `match`. Fixes variable binding scope.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
the first part of this PR comes from a request from @presidento in
#8525.
the second one is an improvement of the error support.
# Description
this PR
- computes `module_search_pattern` to only `ls` the selected modules =>
the goal is to save search time in the future with more tests
- gives better errors when
- the `--path` is invalid
- the `--module` does not exist
- the search is too strict
### examples
```bash
>_ nu crates/nu-utils/standard_library/tests.nu --path does-not-exist
Error:
× directory_not_found
╭─[<commandline>:1:1]
1 │ main --path does-not-exist
· ───────┬──────
· ╰── no such directory
╰────
```
```bash
>_ nu crates/nu-utils/standard_library/tests.nu --module does-not-exist
Error:
× module_not_found
╭─[<commandline>:1:1]
1 │ main --module does-not-exist
· ───────┬──────
· ╰── no such module in /home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/
╰────
```
```bash
>_ nu crates/nu-utils/standard_library/tests.nu --command does_not_exist
Error:
× no test to run
```
instead of the previous
```bash
>_ nu crates/nu-utils/standard_library/tests.nu --path does-not-exist
Error:
× No matches found for /home/amtoine/.local/share/git/store/github.com/amtoine/nushell/does-not-exist/test_*.nu
╭─[/home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/tests.nu:32:1]
32 │ let tests = (
33 │ ls ($path | default $env.FILE_PWD | path join "test_*.nu")
· ───────────────────────────┬───────────────────────────
· ╰── Pattern, file or folder not found
34 │ | each {|row| {file: $row.name name: ($row.name | path parse | get stem)}}
╰────
help: no matches found
```
```bash
>_ nu crates/nu-utils/standard_library/tests.nu --module does-not-exist
Error:
× expected table from pipeline
╭─[/home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/tests.nu:59:1]
59 │ $tests_to_run
60 │ | group-by module
· ────┬───
· ╰── requires a table input
61 │ | transpose name tests
╰────
```
```bash
>_ nu crates/nu-utils/standard_library/tests.nu --command does-not-exist
Error:
× expected table from pipeline
╭─[/home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/tests.nu:59:1]
59 │ $tests_to_run
60 │ | group-by module
· ────┬───
· ╰── requires a table input
61 │ | transpose name tests
╰────
```
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
```
$nothing
```
# After Submitting
```
$nothing
```
# Description
Fixes: #8542
# User-Facing Changes
## Previous
```
❯ cat `~/TE ST/bug`
cat: ~/TE ST/bug: No such file or directory
```
## After
```
❯ cat `~/TE ST/bug`
a
```
This should be ok because We treat back-quoted strings as bare words
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Should close#8616.
Related to #8590.
# Description
With the new builtin `match` command introduced in the `rust` source in
#8590, there is no need to have a custom `match` in the standard
library.
This PR removes the `match` command from `std.nu` and the associated
test.
# User-Facing Changes
Users can not access `match` from `std.nu`.
# Tests + Formatting
```
nu crates/nu-utils/standard_library/tests.nu --path crates/nu-utils/standard_library/ out+err> /dev/null; ($env.LAST_EXIT_CODE == 0)
```
gives `true`
# After Submitting
```
$nothing
```
# Description
This removes autoprinting the final value of a loop, much in the same
spirit as not autoprinting values at the end of statements. As we fix
these corner cases, it becomes more consistent that to print to the
screen in a script, you use the `print` command.
This gives a noticeable performance improvement as a bonus.
Before:
```
C:\Source\nushell〉 for x in 1..10 { $x }
1
2
3
4
5
6
7
8
9
10
```
Now:
```
C:\Source\nushell〉 for x in 1..10 { $x }
C:\Source\nushell〉
```
# User-Facing Changes
**BREAKING CHANGE**
Loops like `for`, `loop`, and `while` will no longer automatically print
loop values to the screen.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Prior to this PR, the less/greater than operators (`<`, `>`, `<=`, `>=`)
would throw an error if either side was null. After this PR, these
operators return null if either side (or both) is null.
### Examples
```bash
1 < 3 # true
1 < null # null
null < 3 # null
null < null # null
```
### Motivation
JT [asked the C#
folks](https://discord.com/channels/601130461678272522/615329862395101194/1086137515053957140)
and this is apparently the approach they would choose for comparison
operators if they could start from scratch.
This PR makes `where` more convenient to use on jagged/missing data. For
example, we can now filter on columns that may not be present in every
row:
```
> [{foo: 123} {}] | where foo? > 10
╭───┬─────╮
│ # │ foo │
├───┼─────┤
│ 0 │ 123 │
╰───┴─────╯
```
Should close one of the tasks in #8450.
# Description
> **Note**
> in order of appearance in the global diff
- 1b7497c419 adds the `std-tests` job to
the CI which
1. installs `nushell` in the runner
2. run the `tests.nu` module
> see `open .github/workflows/ci.yml | get jobs.std-tests | to yaml`
-
[`ec85b6fd`..`9c122115`](ec85b6fd3fc004cd94e3fada5c8e5fe2714fd629..9c12211564ca8ee90ed65ae45776dccb8f8e4ef1)
is where all the magic happens => see below
- 🧪799c7eb7fd introduces some
bugs and failing test to see how the CI behaves => see how the [tests
failed](https://github.com/nushell/nushell/actions/runs/4460098237/jobs/7833018256)
as expected ❌
- 🧪 and c3de1fafb5 reverts the
failing tests, i.e. the previous commit, leaving a standard library
whose tests all pass 🎉 => see the [tests
passing](https://github.com/nushell/nushell/actions/runs/4460153434/jobs/7833110719?pr=8525#step:5:1)
now ✔️
## the changes to the runner
> see
[`ec85b6fd`..`9c122115`](ec85b6fd3fc004cd94e3fada5c8e5fe2714fd629..9c12211564ca8ee90ed65ae45776dccb8f8e4ef1)
the issue with the previous runner was the following: the clever trick
of using `nu -c "use ...; test"` did print the errors when occuring but
they did not capture the true "failure", i.e. in all cases the
`$env.LAST_EXIT_CODE` was set to `0`, never stopping the CI when a test
failed 🤔
i first tried to `try` / `catch` the error in
ec85b6fd3f which kinda worked but only
throw a single error, the first one
i thought it was not the best and started thinking about a solution to
have a complete report of all failing tests, at once, to avoid running
the CI multiple times!
the easiest solution i found was the one i implemented in
9c12211564
> **Warning**
> this changes the structure of the runner quite a bit, but the `for`
loops where annoying to manipulate structured data and allow the runner
to draw a complete report...
now the runner does the following
- compute the list of all available tests in a table with the `file`,
`module` and `name` columns (first part of the pipe until `flatten` and
`rename`)
- run the tests one by one computing the new `pass` column
- with a `log info`
- captures the failing ones => puts `true` in `pass` if the test passes,
`false` otherwise
- if at least one test has failed, throw a single error with the list of
failing tests
### hope you'll like it 😌
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
the standard tests now return a true error that will stop the CI
# After Submitting
```
$nothing
```
# Description
This does a few speedups for tight loops:
* Caches the DeclId for `table` so we don't look it up. This means users
can't easily replace the default one, we might want to talk about this
tradeoff. The lookup for finding `table` in a tight loop is currently
pretty heavy. Might be another way to speed this up.
* `table` no longer pre-calculates the width. Instead, it only
calculates the width when printing a table or record.
* Use more efficient way of collecting the block of each loop
* When printing output, only get the config when needed
Combined, this drops the runtime from a million loop tight iteration
from 1sec 8ms to 236ms.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Some minor code cleanup.
We've accumulated a few macros over the years that arguably don't need
to be macros. This PR removes 4 macros by either:
1. Inlining the macro
2. Replacing the macro with a local function
3. Replacing the macro with a closure
# Description
Add float, string, and date patterns to matcher.
This could probably use some tests 😅
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This moves the representation of variables on the stack to a Vec, which
more closely resembles a stack. For small numbers of variables live at
any one point, this tends to be more efficient than a HashMap. Having a
stack-like vector also allows us to remember a stack position,
temporarily push variables on, then quickly drop the stack back to the
original size when we're done. We'll need this capability to allow
matching inside of conditions.
On this mac, a simple run of:
`timeit { mut x = 1; while $x < 1000000 { $x += 1 } }`
Went from 1 sec 86 ms, down to 1 sec 2 ms. Clearly, we have a lot more
ground we can make up in looping speed 😅 but it's nice that for fixing
this to make matching easier, we also get a win in terms of lookup speed
for small numbers of variables.
# User-Facing Changes
Likely users won't (hopefully) see any negative impact and may even see
a small positive impact.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
@fdncred noticed an
[issue](https://github.com/nushell/nushell/pull/8529#issuecomment-1482770636)
with list annotations that while i was trying to find a fix found
another issue.
innitially, this was accepted by the parser
```nu
def err [list: list<int> = ['a' 'b' 'c']] {}
```
but now an error is raised
```nu
Error: nu::parser::assignment_mismatch
× Default value wrong type
╭─[entry #1:1:1]
1 │ def err [list: list<int> = ['a' 'b' 'c']] {}
· ──────┬────
· ╰── expected default value to be `list<int>`
╰────
```
# User-Facing Changes
none
# Tests + Formatting
done
this pr refines #8270 and closes#8109
# description
examples:
the original syntax is okay
```nu
def okay [nums: list] {} # the type of list will be list<any>
```
empty annotations are allowed in any variation
the last two may be caught by a future formatter,
but do not affect `nu` code currently
```nu
def okay [nums: list<>] {} # okay
def okay [nums: list< >] {} # weird but also okay
def okay [nums: list<
>] {} # also weird but okay
```
types are allowed (See [notes](#notes) below)
```nu
def okay [nums: list<int>] {} # `test [a b c]` will throw an error
def okay [nums: list< int > {} # any amount of space within the angle brackets is okay
def err [nums: list <int>] {} # this is not okay, `nums` and `<int>` will be parsed as
# two separate params,
```
nested annotations are allowed in many variations
```nu
def okay [items: list<list<int>>] {}
def okay [items: list<list>] {}
```
any unterminated annotation is caught
```nu
Error: nu::parser::unexpected_eof
× Unexpected end of code.
╭─[source:1:1]
1 │ def err [nums: list<int] {}
· ▲
· ╰── expected closing >
╰────
```
unknown types are flagged
```nu
Error: nu::parser::unknown_type
× Unknown type.
╭─[source:1:1]
1 │ def err [nums: list<str>] {}
· ─┬─
· ╰── unknown type
╰────
Error: nu::parser::unknown_type
× Unknown type.
╭─[source:1:1]
1 │ def err [nums: list<int, string>] {}
· ─────┬─────
· ╰── unknown type
╰────
```
# notes
the error message for mismatched types in not as intuitive
```nu
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[source:1:1]
1 │ def err [nums: list<int>] {}; err [a b c]
· ┬
· ╰── expected int
╰────
```
it should be something like this
```nu
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[source:1:1]
1 │ def err [nums: list<int>] {}; err [a b c]
· ──┬──
· ╰── expected list<int>
╰────
```
this is currently not implemented
# Description
I need a command that will transform hex string into bytes and into
other direction.
I've implemented `decode hex` command and `encode hex` command. (Based
on `encode base64` and `decode base64` commands
# User-Facing Changes
```
> '010203' | decode hex
0x[01 02 03]
```
and
```
> 0x[01 02 0a] | encode hex
'01020A'
```
---------
Co-authored-by: whiteand <andrewbeletskiy@gmail.com>
Bumps [miette](https://github.com/zkat/miette) from 5.5.0 to 5.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/zkat/miette/blob/main/CHANGELOG.md">miette's
changelog</a>.</em></p>
<blockquote>
<h2>5.6.0 (2023-03-14)</h2>
<h3>Bug Fixes</h3>
<ul>
<li><strong>ci:</strong> configure clippy-specific MSRV (<a
href="b658fc020b">b658fc02</a>)</li>
<li><strong>graphical:</strong> Fix wrong severity of related errors (<a
href="https://redirect.github.com/zkat/miette/issues/234">#234</a>) (<a
href="3497508aa9">3497508a</a>)</li>
<li><strong>atty:</strong> Switch out <code>atty</code> for
<code>is-terminal</code> (<a
href="https://redirect.github.com/zkat/miette/issues/229">#229</a>) (<a
href="443d240f49">443d240f</a>)</li>
</ul>
<h3>Features</h3>
<ul>
<li><strong>protocol:</strong> implement <code>Ord</code> for
<code>Severity</code> (<a
href="https://redirect.github.com/zkat/miette/issues/240">#240</a>) (<a
href="ed486c959d">ed486c95</a>)</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="78fe18e699"><code>78fe18e</code></a>
chore: Release</li>
<li><a
href="2335b25ee7"><code>2335b25</code></a>
docs: update changelog</li>
<li><a
href="443d240f49"><code>443d240</code></a>
fix(atty): Switch out <code>atty</code> for <code>is-terminal</code> (<a
href="https://redirect.github.com/zkat/miette/issues/229">#229</a>)</li>
<li><a
href="ed486c959d"><code>ed486c9</code></a>
feat(protocol): implement <code>Ord</code> for <code>Severity</code> (<a
href="https://redirect.github.com/zkat/miette/issues/240">#240</a>)</li>
<li><a
href="3497508aa9"><code>3497508</code></a>
fix(graphical): Fix wrong severity of related errors (<a
href="https://redirect.github.com/zkat/miette/issues/234">#234</a>)</li>
<li><a
href="b658fc020b"><code>b658fc0</code></a>
fix(ci): configure clippy-specific MSRV</li>
<li><a
href="ebc61b5cf8"><code>ebc61b5</code></a>
docs: Mention miette::miette! macro under "... in application
code" (<a
href="https://redirect.github.com/zkat/miette/issues/233">#233</a>)</li>
<li><a
href="14f952dc91"><code>14f952d</code></a>
(cargo-release) start next development iteration 5.5.1-alpha.0</li>
<li><a
href="128c0a1fae"><code>128c0a1</code></a>
(cargo-release) start next development iteration 5.5.1-alpha.0</li>
<li>See full diff in <a
href="https://github.com/zkat/miette/compare/miette-derive-v5.5.0...miette-derive-v5.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Fix patterns in pattern matching to properly declare their variables
when discovering which variables need to be closed over when creating a
closure.
Also, moves `collect` to core, so that the core language can use `$in`.
Fixes#8595
# User-Facing Changes
See above
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Allows `timeit` to also run commands directly, eg) `timeit ls -la`
# User-Facing Changes
Additional capabilities to `timeit`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This does a couple random changes/fixes:
* Moves `timeit` to use a block instead of a closure. This makes it a
bit more flexible.
* Moves var bindings in patterns to be immutable
# User-Facing Changes
`timeit` now takes a block and no arguments.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds `match` and basic pattern matching.
An example:
```
match $x {
1..10 => { print "Value is between 1 and 10" }
{ foo: $bar } => { print $"Value has a 'foo' field with value ($bar)" }
[$a, $b] => { print $"Value is a list with two items: ($a) and ($b)" }
_ => { print "Value is none of the above" }
}
```
Like the recent changes to `if` to allow it to be used as an expression,
`match` can also be used as an expression. This allows you to assign the
result to a variable, eg) `let xyz = match ...`
I've also included a short-hand pattern for matching records, as I think
it might help when doing a lot of record patterns: `{$foo}` which is
equivalent to `{foo: $foo}`.
There are still missing components, so consider this the first step in
full pattern matching support. Currently missing:
* Patterns for strings
* Or-patterns (like the `|` in Rust)
* Patterns for tables (unclear how we want to match a table, so it'll
need some design)
* Patterns for binary values
* And much more
# User-Facing Changes
[see above]
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR just tweaks the std.nu logging a bit. It looks like this after
this PR. I like the ability to have a parse-able file, which is why
there are pipes, and I like to have a pretty granular time date stamp in
order to get rough performance metrics.
```
nu crates\nu-utils\standard_library\tests.nu
INF|2023-03-23T15:02:00.284|Run test test_asserts test_assert
INF|2023-03-23T15:02:00.372|Run test test_asserts test_assert_equal
INF|2023-03-23T15:02:00.461|Run test test_asserts test_assert_error
INF|2023-03-23T15:02:00.585|Run test test_asserts test_assert_greater
INF|2023-03-23T15:02:00.674|Run test test_asserts test_assert_greater_or_equal
INF|2023-03-23T15:02:00.762|Run test test_asserts test_assert_length
INF|2023-03-23T15:02:00.847|Run test test_asserts test_assert_less
INF|2023-03-23T15:02:00.933|Run test test_asserts test_assert_less_or_equal
INF|2023-03-23T15:02:01.021|Run test test_asserts test_assert_not_equal
INF|2023-03-23T15:02:01.110|Run test test_dirs test_dirs_command
INF|2023-03-23T15:02:01.300|Run test test_logger test_critical
INF|2023-03-23T15:02:01.558|Run test test_logger test_debug
INF|2023-03-23T15:02:01.818|Run test test_logger test_error
INF|2023-03-23T15:02:02.074|Run test test_logger test_info
INF|2023-03-23T15:02:02.331|Run test test_logger test_warning
INF|2023-03-23T15:02:02.573|Run test test_std test_match
INF|2023-03-23T15:02:02.678|Run test test_std test_path_add
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR changes some help text to try and clarify how `register` works
when using from `nu -c`.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR is to make test_dirs.nu work better on macos.
closes#8528
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug that prevented you from having multiple modifiers on
your keybindings.
TODO:
- The docs need to be fixed too
https://www.nushell.sh/book/line_editor.html#keybindings.
(https://github.com/nushell/nushell.github.io/pull/840)
- I think reedline needs to be changed to show this too since it
provides the list of available modifiers.
(https://github.com/nushell/reedline/pull/559)
Now you can do something like this where `shift` and `alt` are combined
with an underscore.
```
{
name: fuzzy_history_fzf
modifier: shift_alt
keycode: char_r
mode: [emacs , vi_normal, vi_insert]
event: {
blah
}
```
Here's the list of available combinations
```rust
"control" => KeyModifiers::CONTROL,
"shift" => KeyModifiers::SHIFT,
"alt" => KeyModifiers::ALT,
"none" => KeyModifiers::NONE,
"shift_alt" | "alt_shift" => KeyModifiers::SHIFT | KeyModifiers::ALT,
"control_shift" | "shift_control" => KeyModifiers::CONTROL | KeyModifiers::SHIFT,
"control_alt" | "alt_control" => KeyModifiers::CONTROL | KeyModifiers::ALT,
"control_alt_shift" | "control_shift_alt" => {
KeyModifiers::CONTROL | KeyModifiers::ALT | KeyModifiers::SHIFT
}
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
## Symptom
Lines which are input into `from ssv --aligned-columns` are split
incorrectly of they contain utf-8 characters which have the length of
multiple bytes. Notice how the values of the `Bars` column bleeds into
the `Security` column in the following output (the big grey areas are
censored data ;) ):
## Problem
The function behind `from ssv --aligned-columns` splits lines into
fields by byte index (which is default behavior of str.get(...) in Rust)
instead of character index. If the header row has a different length in
bytes than the remaining table rows, the split is executed incorrectly.
## Solution
The function behind `from ssv --aligned-columns1 now separates lines by
character index instead of byte index. This productes the following
(correct) output (the big grey areas are censored data ;) ):
This is a follow-up to https://github.com/nushell/nushell/pull/8379 and
https://github.com/nushell/nushell/discussions/8502.
This PR makes it so that the new `?` syntax for marking a path member as
optional short-circuits, as voted on in the
[8502](https://github.com/nushell/nushell/discussions/8502) poll.
Previously, `{ foo: 123 }.bar?.baz` would raise an error:
```
> { foo: 123 }.bar?.baz
× Data cannot be accessed with a cell path
╭─[entry #15:1:1]
1 │ { foo: 123 }.bar?.baz
· ─┬─
· ╰── nothing doesn't support cell paths
╰────
```
Here's what was happening:
1. The `bar?` path member access returns `nothing` because there is no field named `bar` on the record
2. The `baz` path member access fails when trying to access a `baz` field on that `nothing` value
After this change, `{ foo: 123 }.bar?.baz` returns `nothing`; the failed `bar?` access immediately returns `nothing` and the `baz` access never runs.
# Description
This is an experiment to see what switching the `let/let-env` family to
math expressions for initialisers would be like.
# User-Facing Changes
This would require any commands you call from `let x = <command here>`
(and similar family) to call the command in parentheses. `let x = (foo)`
to call `foo`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
I was looking where we could remove the usage of once-cell dependency.
As for now, I only found one place. Not a terrible improvement, but at
least, it removes a dependency nu-test-support crate.
Relies on `Mutex::new` constified in Rust 1.63.0
# Description
this PR
- refactors `ErrorMake::run` to avoid duplicate branches depending on
the value of `--unspanned`
- completes the examples
1. show a really simple `error make` call, without any command
definition
2. show a complete error format with all possible fields
3. the command definition but with indentation and slightly better
description
- adds results to the first two examples
- gives meaningful error messages for all known "bad" error formats,
using the span of the error format or the span of `$format.label` to
better explain why the format is bad
# User-Facing Changes
users have now the following help
```bash
Examples:
Create a simple custom error
> error make {msg: "my custom error message"}
Create a more complex custom error
> error make {
msg: "my custom error message"
label: {
text: "my custom label text" # not mandatory unless $.label exists
start: 123 # not mandatory unless $.label.end is set
end: 456 # not mandatory unless $.label.start is set
}
}
Create a custom error for a custom command that shows the span of the argument
> def foo [x] {
let span = (metadata $x).span;
error make {
msg: "this is fishy"
label: {
text: "fish right here"
start: $span.start
end: $span.end
}
}
}
```
and the following error messages when the error format is bad
https://asciinema.org/a/568107🥳
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🔴 `cargo test --workspace`
=> the tests do not pass but they do not pass on latest `main` either =>
i should `cargo clean`, but that's an expensive operation on my
machine...
# After Submitting
the documentation would have to be regenerated over on the website
# Description
Fixes: #8548
# User-Facing Changes
```
❯ register target/debug/formats
Error:
× Register plugin failed
╭─[entry #1:1:1]
1 │ register target/debug/formats
· ──────────┬─────────
· ╰── plugin name must starts with nu_plugin_
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
…ion` hook
# Description
Previously when a `executehostcommand` shortcut calls `commandline`, to
get the current command line, it's incorrectly set to the value of
`executehostcommand` `cmd`.
This fixes the regression (due to #8207), so it's correctly set to
what's in the REPL buffer.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Should close#7255.
# Description
**TL;DR**: this PR adds `--indent <int>`, `--tabs <int>` and `--raw` to
control a bit more the `string` output of `to nuon`, as done in `to
json` already, the goal being to promote the `NUON` format through easy
to read and formatted output `.nuon` files 😋
### outside of `crates/nu-command/src/formats/to/nuon.rs`
as the signature of `value_to_string` has changed, the single call to it
outside of its module definition has been changed to use default values
=> `value_to_string(&value, Span::unknown(), 0, &None)` in
`crates/nu-command/src/filters/uniq.rs`
### changes to `ToNuon` in `crates/nu-command/src/formats/to/nuon.rs`
- the signature now features `--raw`, `--indent <int>` and `--tabs
<int>`
- the structure of the `run` method is inspired from the one in `to
json`
- we get the values of the arguments
- we convert the input to a usable `Value`
- depending on whether the user raised `--raw`, `--indent` or `--tabs`,
we call the conversion to `string` with different values of the
indentation, starting at depth 0
- finally, we return `Ok` or a `ShellError::CantConvert` depending on
the conversion result
- some tool functions
- `get_true_indentation` gives the full indentation => `indent` repeated
`depth` times
- `get_true_separators` gives the line and field separators => a `("\n",
"")` when using some formatting or `("", " ")` when converting as pure
string on a single line
the meat of `nuon.rs` is now the `value_to_string` recursive function:
- takes the depth and the indent string
- adds correct newlines, space separators and indentation to the output
- calls itself with the same indent string but `depth + 1` to increase
the indentation by one level
- i used the `nl`, `idt`, `idt_po` (**i**n**d**en**t** **p**lus **o**ne)
and `idt_pt` (**i**n**d**en**t** **p**lus **t**wo) to make the
`format!`s easier to read
# User-Facing Changes
users can now
- control the amount and nature of NUON string output indentation with
- `--indent <number of " " per level>`
- `--tabs <number of "\t" per level>`
- use the previous behaviour of `to nuon` with the `--raw` option
- have new examples with `help to nuon`
> **Note**
> the priority order of the options is the following
> 1. `--raw`
> 2. `--tabs`
> 3. `--indent`
>
> the default is `--indent 2`
# Tests + Formatting
### new tests
- tests involving the string output of `to nuon`, i.e. tests not of the
form `... | to nuon | from nuon ...`, now use the `to nuon --raw`
command => this is the smallest change to have the tests pass, as the
new `to nuon --raw` is equivalent to the old `to nuon`
- in `crates/nu-command/src/formats/to/nuon.rs`, the previous example
has been replaced with three examples
- `[1 2 3] | to nuon` to show the default behaviour
- `[1 2 3] | to nuon --raw` to show the not-formatted output
- a more complex example with `{date: 2000-01-01, data: [1 [2 3] 4.56]}
| to nuon`
- the result values have been defined and the `examples` tests pass
### dev
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace` ~~passes but without
`to_nuon_errs_on_closure`~~ fixed in
0b4fad7eff
# After Submitting
the `to nuon` page would have to be regenerated at some point due to the
new tests
# Description
Fixes#6706.
I took a look at this issue and it seems that the issue is because the
path is canonicalized and thus derives to the target. I've tested it
locally by checking if the path is a symlink and acting accordingly to
not canonicalize it and it seems fine.
In current release if the target is deleted but the symlink remains and
one `ls`'s it, it throws a `directory not found` error. But with the fix
it still shows the symlink (with red background, indicating missing
target).
The change I've applied only triggers when `ls` is done on a symlink, on
all other counts it should basically do the same as before.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
## List existing symlink and target
Current
```
ls a_symlink ╭───┬────────┬──────┬──────┬──────────────╮
│ # │ name │ type │ size │ modified │
├───┼────────┼──────┼──────┼──────────────┤
│ 0 │ a_file │ file │ 0 B │ 20 hours ago │
╰───┴────────┴──────┴──────┴──────────────╯
```
With fix
```
ls a_symlink ╭───┬───────────┬─────────┬──────┬──────────────╮
│ # │ name │ type │ size │ modified │
├───┼───────────┼─────────┼──────┼──────────────┤
│ 0 │ a_symlink │ symlink │ 6 B │ 20 hours ago │
╰───┴───────────┴─────────┴──────┴──────────────╯
```
## List existing symlink with missing target
Current
```
ls symfile_x
Error: nu:🐚:directory_not_found (link)
× Directory not found
╭─[entry #13:1:1]
1 │ ls symfile_x
· ────┬────
· ╰── directory not found
╰────
```
With fix
```
ls symfile_x ╭───┬───────────┬─────────┬──────┬─────────────╮
│ # │ name │ type │ size │ modified │
├───┼───────────┼─────────┼──────┼─────────────┤
│ 0 │ symfile_x │ symlink │ 6 B │ 2 hours ago │
╰───┴───────────┴─────────┴──────┴─────────────╯
```
# Description
Unbreak unit tests by updating default config for the new hook that
landed after the syntax change but didn't get its tests re-run.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
as we now want to put all the library in `std.nu` alone, this PR removes
the mentions to "creating a separate submodule from `std.nu`" from the
`README` of the standard library and adds a few clarifications about the
structure of the library.
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
```
$nothing
```
# After Submitting
```
$nothing
```
# Description
Add a `command_not_found` function to `$env.config.hooks`. If this
function outputs a string, then it's included in the `help`.
An example hook on *Arch Linux*, to find packages that contain the
binary, looks like:
```nushell
let-env config = {
# ...
hooks: {
command_not_found: {
|cmd_name| (
try {
let pkgs = (pkgfile --binaries --verbose $cmd_name)
(
$"(ansi $env.config.color_config.shape_external)($cmd_name)(ansi reset) " +
$"may be found in the following packages:\n($pkgs)"
)
} catch {
null
}
)
}
# ...
```
# User-Facing Changes
- Add a `command_not_found` function to `$env.config.hooks`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
when running the tests inside nu-protocol we were getting a compiler
warning...
this PR removes the compiler warning from nu-protocol.
by adding
```rust
#[allow(unused_imports)]
```
# Description
## in the `test_dirs` test module
- use the `std assert` function in the `test_dirs` module instead of
`myassert`
- refactor the "test cleaning" in the `clean` command
- allows to clean the tests and then throw a real error in the `catch`
block in case there is an error
- the test still "try"s to `clean` the test directory after the `catch`,
like in a "finally" block
- parse the `catch` error and `error make` a proper one instead of
`debug`ging it => because the `catch` will be triggered as soon as one
error occurs, there will always only be a single error in the tests, so
this does not change the behaviour of failing `dirs` tests!
> **Note**
> i'm not particularly happy with the parsing stage in the `catch`
block.
> however that's the simplest i found to both keep the `try` / `catch`
construct that allows to clean the test directory and have a proper
error at the same time!
## in the global `tests` module
- use `print` instead of `echo` to make sure the log statements show up
during the tests
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
```bash
nu crates/nu-utils/standard_library/tests.nu
```
passes but now with
- proper log statements
- proper error when a `dirs` error occurs => try with `sd 'assert \(1'
"assert (10" crates/nu-utils/standard_library/test_dirs.nu` 😉
# After Submitting
```
$nothing
```
# Description
```nushell
log critical "this is a critical message"
log error "this is an error message"
log warning "this is a warning message"
log info "this is an info message"
log debug "this is a debug message"
```
# Tests + Formatting
Tests are written. To run automatically, #8443 needs to be merged before
or after this PR.
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
# Description
as closures now need to have explicit parameters, this PR adds the empty
`||` to the two closure of the `std match` test.
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
```
nu crates/nu-utils/standard_library/tests.nu
```
does not give the following anymore
```
Error: nu::parser::closure_missing_pipe
× Missing || inside closure
╭─[/home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/test_std.nu:29:1]
29 │ let branches = {
30 │ 1: { -1 }
· ───┬──
· ╰── Parsing as a closure, but || is missing
31 │ 2: { -2 }
╰────
help: Try add || to the beginning of closure
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[/home/amtoine/.local/share/git/store/github.com/amtoine/nushell/crates/nu-utils/standard_library/tests.nu:7:1]
7 │ nu -c $'use ($test_file) *; $nu.scope.commands | to nuon'
8 │ | from nuon
· ────┬────
· ╰── input type: nothing
9 │ | where module_name == $module_name
· ──┬──
· ╰── only list, binary, raw data or range input data is supported
10 │ | where ($it.name | str starts-with "test_")
╰────
```
# After Submitting
```
$nothing
```
# Description
This adds two different features to `open`:
* The ability to pass more than one file to `open`.
* Support for using globs in the filenames
`open` will create a list stream and stream the output if there is more
than one file opened
Examples:
```
open file1.csv file2.csv file3.csv
```
```
open *.nu | where $it =~ "echo"
```
# User-Facing Changes
Multi-file and glob support in `open`. Original `open` functionality
should continue as before.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
> **Warning**
> this PR is the result of a demand from the core team, to have the
simplest structure for the standard library, at least for now 👍
# Description
this PR mainly
- moved the `dirs.nu` module to the end of `std.nu`
- fixed the imports in `test_dirs.nu`
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
with the new runner from #8443, we get as expected 👌
```
>_ nu crates/nu-utils/standard_library/tests.nu
INFO Run tests in test_dirs
DEBUG Run test test_dirs/test_dirs_command
INFO Run tests in test_std
DEBUG Run test test_std/test_assert
DEBUG Run test test_std/test_match
DEBUG Run test test_std/test_path_add
```
# After Submitting
```
$nothing
```
Reverts nushell/nushell#8310
In anticipation that we may want to revert this PR. I'm starting the
process because of this issue.
This stopped working
```
let-env NU_LIB_DIRS = [
($nu.config-path | path dirname | path join 'scripts')
'C:\Users\username\source\repos\forks\nu_scripts'
($nu.config-path | path dirname)
]
```
You have to do this now instead.
```
const NU_LIB_DIRS = [
'C:\Users\username\AppData\Roaming\nushell\scripts'
'C:\Users\username\source\repos\forks\nu_scripts'
'C:\Users\username\AppData\Roaming\nushell'
]
```
In talking with @kubouch, he was saying that the `let-env` version
should keep working. Hopefully it's a small change.
# Description
Fixes: #7575
# User-Facing Changes
Previously:
```
if❯ if false { "aaa" } else if $a { 'a' }
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #10:1:1]
1 │ if false { "aaa" } else if $a { 'a' }
· ─┬
· ╰── expected block, closure or record
╰────
```
After:
```
❯ if false { "aaa" } else if $a { 'a' }
Error: nu::parser::variable_not_found
× Variable not found.
╭─[entry #1:1:1]
1 │ if false { "aaa" } else if $a { 'a' }
· ─┬
· ╰── variable not found
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, closes: #7921closes: #8273
# User-Facing Changes
when define a closure without pipe, nushell will raise error for now:
```
❯ let x = {ss ss}
Error: nu::parser::closure_missing_pipe
× Missing || inside closure
╭─[entry #2:1:1]
1 │ let x = {ss ss}
· ───┬───
· ╰── Parsing as a closure, but || is missing
╰────
help: Try add || to the beginning of closure
```
`any`, `each`, `all`, `where` command accepts closure, it forces user
input closure like `{||`, or parse error will returned.
```
❯ {major:2, minor:1, patch:4} | values | each { into string }
Error: nu::parser::closure_missing_pipe
× Missing || inside closure
╭─[entry #4:1:1]
1 │ {major:2, minor:1, patch:4} | values | each { into string }
· ───────┬───────
· ╰── Parsing as a closure, but || is missing
╰────
help: Try add || to the beginning of closure
```
`with-env`, `do`, `def`, `try` are special, they still remain the same,
although it says that it accepts a closure, but they don't need to be
written like `{||`, it's more likely a block but can capture variable
outside of scope:
```
❯ def test [input] { echo [0 1 2] | do { do { echo $input } } }; test aaa
aaa
```
Just realize that It's a big breaking change, we need to update config
and scripts...
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Allow NU_LIBS_DIR and friends to be const they can be updated within the
same parse pass. This will allow us to remove having multiple config
files eventually.
Small implementation detail: I've changed `call.parser_info` to a
hashmap with string keys, so the information can have names rather than
indices, and we don't have to worry too much about the order in which we
put things into it.
Closes https://github.com/nushell/nushell/issues/8422
# User-Facing Changes
In a single file, users can now do stuff like
```
const NU_LIBS_DIR = ['/some/path/here']
source script.nu
```
and the source statement will use the value of NU_LIBS_DIR declared the
line before.
Currently, if there is no `NU_LIBS_DIR` const, then we fallback to using
the value of the `NU_LIBS_DIR` env-var, so there are no breaking changes
(unless someone named a const NU_LIBS_DIR for some reason).
# Tests + Formatting
~~TODO: write tests~~ Done
# After Submitting
~~TODO: update docs~~ Will do when we update default_env.nu/merge
default_env.nu into default_config.nu.
# Description
When using `char`, I somehow missed the `--list` flag (even though it's
of course displayed in the help output). While it's maybe a bit
redundant to have a usage of the flag in the examples, I suspect that I
may not be alone in needing an extra nudge on getting that info 😄
# User-Facing Changes
Just an extra example in the `char` help output.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds a new cell path literal syntax for use in any value position,
not just in a context where we expect a cell path.
This can be used to assign to a variable and then later use that
variable as a cell path.
Example:
```
> let cell_path = $.a.b
> {a: {b: 3}} | get $cell_path
3
```
# User-Facing Changes
This adds the syntax `$.a.b` to universally mean the cell path `a.b`,
even in a context that doesn't expect a cell path.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix the recent parser panic with a single `{`
Introduced by https://github.com/nushell/nushell/pull/8470
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR adds a command `join` for performing SQL-style joins on Nushell
tables:
```
〉join -h
Join two tables
Usage:
> join {flags} <right-table> <left-on> (right-on)
Flags:
-h, --help - Display the help message for this command
-i, --inner - Inner join (default)
-l, --left - Left-outer join
-r, --right - Right-outer join
-o, --outer - Outer join
Signatures:
<table> | join list<any>, <string>, <string?> -> <table>
Parameters:
right-table <list<any>>: The right table in the join
left-on <string>: Name of column in input (left) table to join on
(optional) right-on <string>: Name of column in right table to join on. Defaults to same column as left table.
Examples:
Join two tables
> [{a: 1 b: 2}] | join [{a: 1 c: 3}] a
╭───┬───┬───╮
│ a │ b │ c │
├───┼───┼───┤
│ 1 │ 2 │ 3 │
╰───┴───┴───╯
```
<table>
<tbody>
<tr>
<td><img width="400" alt="image"
src="https://user-images.githubusercontent.com/52205/224578744-eb9d133e-2510-4a3d-bd0a-d615f07a06b7.png"></td>
</tr>
</tbody>
</table>
# User-Facing Changes
Adds a new command `join`
# Tests + Formatting
```
cargo test -p nu-command commands::join
```
Don't forget to add tests that cover your changes.
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
- [ ] If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Resolves issue #8370
Adds the following flags to commands `from csv` and `from tsv`:
- `--flexible`: allow the number of fields in records to be variable
- `-c --comment`: a comment character to ignore lines starting with it
- `-q --quote`: a quote character to ignore separators in strings,
defaults to '\"'
- `-e --escape`: an escape character for strings containing the quote
character
Internally, the `Value` struct has an additional helper function
`as_char` which converts it to a single `char`
# User-Facing Changes
The single quoted string `'\t'` can no longer be used as a parameter for
the flag `--separator '\t'` as it is interpreted as a two-character
string. One needs to use from now on the flag with a double quoted
string like so: `-s "\t"` which correctly interprets the string as a
single `char`.
# Description
This PR tweaks the enable_vt_processing() function with more verbose
error handling. This is related to #8344.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fixes the `commandline` command when it's run with no arguments, so
it outputs the command being run. New line characters are included.
This allows for:
- [A way to get current command inside pre_execution hook · Issue #6264
· nushell/nushell](https://github.com/nushell/nushell/issues/6264)
- The possibility of *Atuin* to work work *Nushell*. *Atuin* hooks need
to know the current repl input before it is run.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds back support for parens around params, eg `def foo (x: int) {
... }`
# User-Facing Changes
returns to the original support before the recent parser refactor
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
https://github.com/nushell/nushell/pull/8379 removed the `-i` flag from
`get` and `select` because the new `?` functionality covers most of the
same use cases. However, https://github.com/nushell/nushell/issues/8480
made me realize that `-i` is still useful when dealing with cell paths
in variables.
This PR re-adds the `-i` flag to `get` and `select`. It works by just
marking every member in the cell path as optional, which will behave
_slightly_ differently than `-i` used to (previously it would suppress
any errors, even type errors) but IMO that's OK.
# Description
Was original asked here:
https://github.com/nushell/nushell/pull/8405#issuecomment-1465062652
Make it easier to extend standard library with submodules.
(For a new submodule called `xx.nu` the tests can be written in
`test_xx.nu`).
Test discovery is implemented.
# User-Facing Changes
There are no user-facing changes.
# Tests + Formatting
Tests are updated.
There is no `nufmt` now.
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
This reverts commit dec0a2517f.
It breaks programs like `fzf`
# Description
Fixes: #8472
Fixes: #8313Reopen: #7690
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the issue where there is no way to escape `FOO=BAR` in a way that
treats it as a file path/executable name. Previously `^FOO=BAR` would be
handled as an environment shorthand. Now, environment shorthands are not
allowed to start with `^`. To create an environment shorthand value that
uses `^` as the first character of the environment variable name, use
quotes, eg `"^FOO"=BAR`
# User-Facing Changes
This should enable `=` being in paths and external command names in
command position.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds a fix for reading tag values from YAML file.
A tag in YAML file is denoted by using the exclamation point ("!")
symbol.
For example - Key: !Value
Additional passing test has also been added supporting the bug fix -
- `test_convert_yaml_value_to_nu_value_for_tagged_values`
The fix passes all the below required tests suites locally -
>To check standard code formatting.
- `cargo fmt --all -- --check` (`cargo fmt --all` applies these changes)
>To check that you're using the standard code style.
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect`
>To check that all tests pass
- `cargo test --workspace`
---------
Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
Bumps [mockito](https://github.com/lipanski/mockito) from 0.32.5 to
1.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lipanski/mockito/releases">mockito's
releases</a>.</em></p>
<blockquote>
<h2>1.0.0</h2>
<p>🎈 7 years and 63 releases later, it's finally time for the
1.0 🎈</p>
<h2>Changes</h2>
<ul>
<li><strong>[Breaking]</strong> The legacy interface was removed in this
version</li>
<li><strong>[Breaking]</strong> <code>Mock::with_body_from_fn</code> was
renamed to <code>Mock::with_chunked_body</code> - the former is still
supported with a deprecation warning</li>
<li>Mocks are only cleared when the server is dropped, not when the mock
is dropped - this means you <strong>don't have to assign mocks to
variables any more</strong> (unless you want to call other methods on
them)</li>
<li>Introduced the <code>Mock::remove</code> and
<code>Mock::remove_async</code> methods to remove mocks on demand</li>
</ul>
<h2>Major changes since 0.31</h2>
<ul>
<li>Tests can now run in parallel</li>
<li>Support for HTTP2</li>
<li>An async interface for all actions (though the sync interface is
also available)</li>
<li>Mock multiple server/hosts at the same time</li>
</ul>
<p>For a list of all the changes please check the <a
href="https://github.com/lipanski/mockito/releases">release log</a>.</p>
<h2>Migrating to the new API</h2>
<p>Legacy API:</p>
<pre lang="rust"><code>let m1 = mockito::mock("GET",
"/hello").with_body("hello").create();
let m2 = mockito::mock("GET",
"/bye").with_body("bye").create();
<p>// Use one of these to configure your client
let host = mockito:server_address();
let url = mockito::server_url();
</code></pre></p>
<p>New API:</p>
<pre lang="rust"><code>let mut server = mockito::Server::new();
server.mock("GET",
"/hello").with_body("hello").create();
server.mock("GET",
"/bye").with_body("bye").create();
<p>// Use one of these to configure your client
let host = server.host_with_port();
let url = server.url();
</code></pre></p>
<blockquote>
<p>If you can't migrate to the new API in one go, consider using version
0.32.5, which supports both the legacy API as well as the new API.</p>
</blockquote>
<h2>Migrating to the async API</h2>
<p>In order to write async tests, you'll need to use the
<code>_async</code> methods:</p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9a07811955"><code>9a07811</code></a>
Bump to 1.0.0</li>
<li><a
href="000c435f0e"><code>000c435</code></a>
Merge pull request <a
href="https://redirect.github.com/lipanski/mockito/issues/165">#165</a>
from lipanski/one-zero</li>
<li><a
href="68c56290a1"><code>68c5629</code></a>
Remove mocks when the server is dropped, not when the mock is
dropped</li>
<li><a
href="ac9042d022"><code>ac9042d</code></a>
Add the Windows line-ending fix to the test runner</li>
<li><a
href="0ce9788e00"><code>0ce9788</code></a>
Disable color tests on Windows</li>
<li><a
href="ad2ebcbaab"><code>ad2ebcb</code></a>
Fine-tuning the Windows test runner</li>
<li><a
href="abb9e91d71"><code>abb9e91</code></a>
Run Windows tests on Github Actions</li>
<li><a
href="5a7c96eaec"><code>5a7c96e</code></a>
Rename Mock::with_body_from_fn to Mock::with_chunked_body</li>
<li><a
href="ed338faedf"><code>ed338fa</code></a>
Uncomment threads tests</li>
<li><a
href="6e2064de95"><code>6e2064d</code></a>
Drop legacy interface</li>
<li>Additional commits viewable in <a
href="https://github.com/lipanski/mockito/compare/0.32.5...1.0.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Fixes: #8402#8391
The cause of these issue if when we want to evaluate a expression with
`Value::Error`, nushell show error immediately. To fix the issue, we can
wrap the `Value::Error` into a `Value::Record`. So user can see the
message he want.
# User-Facing Changes
Before
```
❯ try { 1 / 0 } catch {|e| echo $"error is ($e)"}
Error: nu:🐚:division_by_zero
× Division by zero.
╭─[entry #2:1:1]
1 │ try { 1 / 0 } catch {|e| echo $"error is ($e)"}
· ┬
· ╰── division by zero
╰────
```
After
```
❯ try { 1 / 0 } catch {|e| echo $"error is ($e)"}
error is {msg: Division by zero., debug: DivisionByZero { span: Span { start: 43104, end: 43105 } }, raw: DivisionByZero { sp
an: Span { start: 43104, end: 43105 } }}
```
As we can see, error becomes a record with `msg`, `debug`, `raw`
columns.
1. msg column is a user friendly message.
2. debug column is more about `Value::Error` information as a string.
3. raw column is a `Value::Error` itself, if user want to re-raise the
error, just use `$e | get raw`
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is a follow up from https://github.com/nushell/nushell/pull/7540.
Please provide feedback if you have the time!
## Summary
This PR lets you use `?` to indicate that a member in a cell path is
optional and Nushell should return `null` if that member cannot be
accessed.
Unlike the previous PR, `?` is now a _postfix_ modifier for cell path
members. A cell path of `.foo?.bar` means that `foo` is optional and
`bar` is not.
`?` does _not_ suppress all errors; it is intended to help in situations
where data has "holes", i.e. the data types are correct but something is
missing. Type mismatches (like trying to do a string path access on a
date) will still fail.
### Record Examples
```bash
{ foo: 123 }.foo # returns 123
{ foo: 123 }.bar # errors
{ foo: 123 }.bar? # returns null
{ foo: 123 } | get bar # errors
{ foo: 123 } | get bar? # returns null
{ foo: 123 }.bar.baz # errors
{ foo: 123 }.bar?.baz # errors because `baz` is not present on the result from `bar?`
{ foo: 123 }.bar.baz? # errors
{ foo: 123 }.bar?.baz? # returns null
```
### List Examples
```
〉[{foo: 1} {foo: 2} {}].foo
Error: nu:🐚:column_not_found
× Cannot find column
╭─[entry #30:1:1]
1 │ [{foo: 1} {foo: 2} {}].foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
〉[{foo: 1} {foo: 2} {}].foo?
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ │
╰───┴───╯
〉[{foo: 1} {foo: 2} {}].foo?.2 | describe
nothing
〉[a b c].4? | describe
nothing
〉[{foo: 1} {foo: 2} {}] | where foo? == 1
╭───┬─────╮
│ # │ foo │
├───┼─────┤
│ 0 │ 1 │
╰───┴─────╯
```
# Breaking changes
1. Column names with `?` in them now need to be quoted.
2. The `-i`/`--ignore-errors` flag has been removed from `get` and
`select`
1. After this PR, most `get` error handling can be done with `?` and/or
`try`/`catch`.
4. Cell path accesses like this no longer work without a `?`:
```bash
〉[{a:1 b:2} {a:3}].b.0
2
```
We had some clever code that was able to recognize that since we only
want row `0`, it's OK if other rows are missing column `b`. I removed
that because it's tricky to maintain, and now that query needs to be
written like:
```bash
〉[{a:1 b:2} {a:3}].b?.0
2
```
I think the regression is acceptable for now. I plan to do more work in
the future to enable streaming of cell path accesses, and when that
happens I'll be able to make `.b.0` work again.
Should close#8444.
# Description
as asked by @presidento, i've used a generic command to run the tests.
i've also transformed the "a concrete example" sections into quote
blocks to make them stand out less.
not sure about that one, please tell me what you think 😋
i think a small example is always helpfull, maybe some work has to be
done to make it better 💪
# User-Facing Changes
hopefully a slightly clearer README for the standard library
# Tests + Formatting
```
$nothing
```
# After Submitting
```
$nothing
```
# Description
I found this when I was checking out my commits. It must have happened
during one of the random test failures that I've been getting quite
often recently.
# User-Facing Changes
None?
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This starts working on refactoring the parser to no longer use
SyntaxShape when making parsing decisions about values. This PR covers
grouping a few of the steps in `parse_value` to key off the first
character for what group of parsing steps it should use.
# User-Facing Changes
Hopefully none.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
`help externs` - command, which list external commands
Closes https://github.com/nushell/nushell/issues/8301
# User-Facing Changes
```nu
$ help externs
╭───┬──────────────┬─────────────┬───────────────────────────────────────────────────╮
│ # │ name │ module_name │ usage │
├───┼──────────────┼─────────────┼───────────────────────────────────────────────────┤
│ 0 │ git push │ completions │ Push changes │
│ │ │ │ │
│ 1 │ git fetch │ completions │ Download objects and refs from another repository │
│ │ │ │ │
│ 2 │ git checkout │ completions │ Check out git branches and files │
│ │ │ │ │
╰───┴──────────────┴─────────────┴───────────────────────────────────────────────────╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
It is a common pattern to add message to assert.
Also the error message was not so helpful. (See the difference in the
documentation)
---------
Co-authored-by: Mate Farkas <Mate.Farkas@oneidentity.com>
# Description
This fixes up some clippy warnings and removes some old names/info from
our unit tests
# User-Facing Changes
Internal changes only
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Prior to this PR, `ls` would return `nothing` in an empty directory.
After this PR, it returns an empty `List`. This makes the behaviour of
`ls` more consistent and easier to reason about (IMO).
This was prompted by a user noticing that `ls | where size == 0KB and
type == file` breaks when run in an empty directory:
```
× Input type not supported.
╭─[entry #12:1:1]
1 │ ls | where size == 0KB and type == file
· ─┬ ──┬──
· │ ╰── only list, binary, raw data or range input data is supported
· ╰── input type: nothing
╰────
```
If people agree with this change, let's wait until after the 0.77
release so we have a bit more time to test it.
# Description
The correction made here concerns the issue #8431. Indeed, the algorithm
initially proposed to remove elements of a `vector` performed a loop
with `remove` and an incident therefore appeared when several values
were equal because the deletion was done outside the length of the
vector:
```rust
let mut found = false;
for (i, col) in cols.clone().iter().enumerate() {
if col == col_name {
cols.remove(i);
vals.remove(i);
found = true;
}
}
```
Then, `[[a, a]; [1, 2]] | reject a: ` gave `thread 'main' panicked at
'removal index (is 1) should be < len (is 1)',
crates/nu-protocol/src/value/mod.rs:1213:54`.
The proposed correction is therefore the implementation of the
`retain_mut` utility dedicated to this functionality.
```rust
let mut found = false;
let mut index = 0;
cols.retain_mut(|col| {
if col == col_name {
found = true;
vals.remove(index);
false
} else {
index += 1;
true
}
});
```
# Description
The "CREATE TABLE" statement in `into sqlite` does not add quotes to the
column names, reproduction steps are below:
```
/home/xxx〉[[name,y/n];[a,y]] | into sqlite test.db
Error:
× Failed to prepare SQLite statement
╭─[entry #1:1:1]
1 │ [[name,y/n];[a,y]] | into sqlite test.db
· ───┬───
· ╰── near "/": syntax error in CREATE TABLE IF NOT EXISTS main (name TEXT,y/n TEXT) at offset 44
╰────
```
# User-Facing Changes
None
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
Prevents alias from aliasing itself. It allows a commonly requested
pattern similar to `alias ls = ls -l`.
One small issue is that the syntax highlighting is a bit off:
Fixes https://github.com/nushell/nushell/issues/8246
# User-Facing Changes
Shouldn't be a breaking change.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Our `ShellError` at the moment has a `std::mem::size_of<ShellError>` of
136 bytes (on AMD64). As a result `Value` directly storing the struct
also required 136 bytes (thanks to alignment requirements).
This change stores the `Value::Error` `ShellError` on the heap.
Pro:
- Value now needs just 80 bytes
- Should be 1 cacheline less (still at least 2 cachelines)
Con:
- More small heap allocations when dealing with `Value::Error`
- More heap fragmentation
- Potential for additional required memcopies
# Further code changes
Includes a small refactor of `try` due to a type mismatch in its large
match.
# User-Facing Changes
None for regular users.
Plugin authors may have to update their matches on `Value` if they use
`nu-protocol`
Needs benchmarking to see if there is a benefit in real world workloads.
**Update** small improvements in runtime for workloads with high volume
of values. Significant reduction in maximum resident set size, when many
values are held in memory.
# Tests + Formatting
# Description
Changes old `from xml` `to xml` data formats. See #7682 for reasoning
behind this change.
Output is now a series of records with `tag`, `attributes` and `content`
fields.
Old:
New:
# User-Facing Changes
New output/input format, better error handling for `from xml` and `to
xml` commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Prototype replacement for `enter`, `n`, `p`, `exit` built-ins
implemented as scripts in standard library.
MVP-level capabilities (rough hack), for feedback please. Not intended
to merge and ship as is.
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
New command in standard library
```nushell
〉use ~/src/rust/nushell/crates/nu-utils/standard_library/dirs.nu
---------------------------------------------- /home/bobhy ----------------------------------------------
〉help dirs
module dirs.nu -- maintain list of remembered directories + navigate them
todo:
* expand relative to absolute paths (or relative to some prefix?)
* what if user does `cd` by hand?
Module: dirs
Exported commands:
add (dirs add), drop, next (dirs next), prev (dirs prev), show (dirs show)
This module exports environment.
---------------------------------------------- /home/bobhy ----------------------------------------------
〉dirs add ~/src/rust/nushell /etc ~/.cargo
-------------------------------------- /home/bobhy/src/rust/nushell --------------------------------------
〉dirs next 2
------------------------------------------- /home/bobhy/.cargo -------------------------------------------
〉dirs show
╭───┬─────────┬────────────────────╮
│ # │ current │ path │
├───┼─────────┼────────────────────┤
│ 0 │ │ /home/bobhy │
│ 1 │ │ ~/src/rust/nushell │
│ 2 │ │ /etc │
│ 3 │ ==> │ ~/.cargo │
╰───┴─────────┴────────────────────╯
------------------------------------------- /home/bobhy/.cargo -------------------------------------------
〉dirs drop
---------------------------------------------- /home/bobhy ----------------------------------------------
〉dirs show
╭───┬─────────┬────────────────────╮
│ # │ current │ path │
├───┼─────────┼────────────────────┤
│ 0 │ ==> │ /home/bobhy │
│ 1 │ │ ~/src/rust/nushell │
│ 2 │ │ /etc │
╰───┴─────────┴────────────────────╯
---------------------------------------------- /home/bobhy ----------------------------------------------
〉
```
# Tests + Formatting
Haven't even looked at stdlib `tests.nu` yet.
Other todos:
* address module todos.
* integrate into std lib, rather than as standalone module. Somehow
arrange for `use .../standard_library/std.nu` to load this module
without having to put all the source in `std.nu`?
* Maybe command should be `std dirs ...`?
* what else do `enter` and `exit` do that this should do? Then deprecate
those commands.
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This works around a bug introduced by #8058
We should revisit the original fix, as it makes some assumptions about
how stdout redirection is used by `table`. We use the stdout by default
for table regularly during a repl session, so we should instead
special-case case for handling externals.
# User-Facing Changes
Restores the original default `table` behaviour for binary data
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the crash when handing `{}#.}`
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is a follow-up from https://github.com/nushell/nushell/pull/8173,
which was merged shortly after the 0.76 release. That PR changed
`default_env.nu` so that the user's home folder is displayed as `~` in
the left prompt. It did so using `get -i`.
This PR just rewrites the Nu code from
https://github.com/nushell/nushell/pull/8173 to use `try`/`catch`
instead of `-i`, which will make it easier to remove the `-i` flags from
`get` and `select` eventually (see
https://github.com/nushell/nushell/pull/8379).
I would like to merge this before the 0.77 release, so we don't end up
with lots of `env.nu` files using `get -i` out in the wild.
A tiny fix: make the naming of the `sqlite` feature consistent across
both `Cargo.toml` and the `version` command's output. Previously
`version` displayed it as `database`, a user was asking about that the
other day.
# Description
in https://github.com/nushell/nushell/issues/8311 and the discord
server, the idea of moving the default banner from the `rust` source to
the `nushell` standar library has emerged 😋
however, in order to do this, one need to have access to all the
variables used in the default banner => all of them are accessible
because known constants, except for the startup time of the shell, which
is not anywhere in the shell...
#### this PR adds exactly this, i.e. the new `startup_time` to the `$nu`
variable, which is computed to have the exact same value as the value
shown in the banner.
## the changes
in order to achieve this, i had to
- add `startup_time` as an `i64` to the `EngineState` => this is, to the
best of my knowledge, the easiest way to pass such an information around
down to where the banner startup time is computed and where the `$nu`
variable is evaluated
- add `startup-time` to the `$nu` variable and use the `EngineState`
getter for `startup_time` to show it as a `Value::Duration`
- pass `engine_state` as a `&mut`able argument from `main.rs` down to
`repl.rs` to allow the setter to change the value of `startup_time` =>
without this, the value would not change and would show `-1ns` as the
default value...
- the value of the startup time is computed in `evaluate_repl` in
`repl.rs`, only once at the beginning, and the same value is used in the
default banner 👌
# User-Facing Changes
one can now access to the same time as shown in the default banner with
```bash
$nu.startup-time
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace`
# After Submitting
```
$nothing
```
# Description
Fixes#8245. Instead of trying to use `nano` or `notepad` as defaults,
it errors out if finds that `buffer_editor` , $EDITOR, $VISUAL do not
exist.
If the PR is landed, Ill update the website as it means what its in
there is no longer correct.
```
❯ config nu
Error:
× No editor configured
╭─[entry #3:1:1]
1 │ config nu
· ────┬────
· ╰── Please specify one via environment variables $EDITOR or $VISUAL
╰────
help: Nushell's config file can be found with the command: $nu.config-path. For more help: (https://nushell.sh/book/configuration.html#configurations-with-built-in-commands)
```
# User-Facing Changes
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting (`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A clippy::needless_collect` to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged, if necessary. This will help us keep the docs up to date.
This reverts https://github.com/nushell/nushell/pull/8114 which upgraded
to `notify` (a file watching crate used by the `watch` command) v5.
`notify` v5 has several breaking changes and it's much harder to use. It
no longer includes debouncing of file system events, which I think is
essential functionality for `watch`. @WindSoilder was going to try
writing our own debouncing functionality but I don't think he had time
to finish it.
@WindSoilder Is it OK if we revert this for the 0.77 release (March 14)?
We can try again for 0.78
Add two rows in `$nu`, `$nu.is-interactive` and `$nu.is-login`, which
are true when nu is run in interactive and login mode respectively.
The `-i` flag now behaves a bit more like that of bash's, where the any
provided command or file is run without REPL but in "interactive mode".
This should entail sourcing interactive-mode config files, but since we
are planning on overhauling the config system soon, I'm holding off on
that. For now, all `-i` does is set `$nu.is-interactive` to be true.
About testing, I can't seem to find where cli-args get tested, so I
haven't written any new tests for this. Also I don't think there are any
docs that need updating. However if I'm wrong please tell me.
# Description
Hides https://github.com/nushell/nushell/pull/7925 from config and
disables by default. Option is still present in config, just hidden.
# User-Facing Changes
Users can no longer find `table.show_empty` in config and it is set to
false by default.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes an error message that popped up after landing a PR #8337.
I guess there were too many changes since the PR was submitted?
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
this PR adds the `path add` command to
`crates/nu-utils/standard_library/std.nu`
- this comes from frequent questions over on the discord server, about
how to add directories to the `PATH`
- this is greatly inspired from the [original
`path-add`](https://discord.com/channels/601130461678272522/615253963645911060/1081206660816699402)
from @melMass
- allows to prepend and append a variable number of directories to the
`PATH`
- i've added a description with an example
- i've added tests in `crates/nu-utils/standard_library/tests.nu` that
hopefully covers all the features
# User-Facing Changes
`path add` can now be used from `std.nu`
# Tests + Formatting
the tests pass with
```bash
nu crates/nu-utils/standard_library/tests.nu
```
# After Submitting
```bash
$nothing
```
# Description
Fix for data ambiguity noted in #8244.
Basic change is to use nanosecond resolution for unix timestamps (stored
in type Int). Previously, a timestamp might have seconds, milliseconds
or nanoseconds, but it turned out there were overlaps in data ranges
between different resolutions, so there wasn't always a unique mapping
back to date/time.
Due to higher precision, the *range* of dates that timestamps can map to
is restricted. Unix timestamps with seconds resolution and 64 bit
storage can cover all dates from the Big Bang to eternity. Timestamps
with seconds resolution and 32 bit storage can only represent dates from
1901-12-13 through 2038-01-19. The nanoseconds resolution and 64 bit
storage used with this fix can represent dates from 1677-09-21T00:12:44
to 2262-04-11T23:47:16, something of a compromise.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
## `<datetime> | into int`
Converts to nanosecond resolution
```rust
〉date now | into int
1678084730502126846
```
This is the number of non-leap nanoseconds after the unix epoch date:
1970-01-01T00:00:00+00:00.
Conversion fails for dates outside the supported range:
```rust
〉1492-10-12 | into int
Error: nu:🐚:incorrect_value
× Incorrect value.
╭─[entry #51:1:1]
1 │ 1492-10-12 | into int
· ────┬───
· ╰── DateTime out of timestamp range 1677-09-21T00:12:43 and 2262-04-11T23:47:16
╰────
```
## `<int> | into datetime`
Can no longer fail or produce incorrect results for any 64-bit input:
```rust
〉0 | into datetime
Thu, 01 Jan 1970 00:00:00 +0000 (53 years ago)
〉"7fffffffffffffff" | into int -r 16 | into datetime
Fri, 11 Apr 2262 23:47:16 +0000 (in 239 years)
〉("7fffffffffffffff" | into int -r 16) * -1 | into datetime
Tue, 21 Sep 1677 00:12:43 +0000 (345 years ago)
```
## `<date> | date to-record` and `<date> | date to-table`
Now both have a `nanosecond` field.
```rust
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-record
╭────────────┬───────────╮
│ year │ 2262 │
│ month │ 4 │
│ day │ 11 │
│ hour │ 23 │
│ minute │ 47 │
│ second │ 16 │
│ nanosecond │ 854775807 │
│ timezone │ +00:00 │
╰────────────┴───────────╯
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-table
╭───┬──────┬───────┬─────┬──────┬────────┬────────┬────────────┬──────────╮
│ # │ year │ month │ day │ hour │ minute │ second │ nanosecond │ timezone │
├───┼──────┼───────┼─────┼──────┼────────┼────────┼────────────┼──────────┤
│ 0 │ 2262 │ 4 │ 11 │ 23 │ 47 │ 16 │ 854775807 │ +00:00 │
╰───┴──────┴───────┴─────┴──────┴────────┴────────┴────────────┴──────────╯
```
This change was not mandated by the OP problem, but it is nice to be
able to see the nanosecond bits that were present in Nushell `date` type
all along.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
i tried yesterday to `encode` with an invalid character set and this is
what i got
```bash
>_ {alg: "HS256", type: "JWT"} | to json -r | encode base64 --character-set invalid-character-set
Error:
× value is not an accepted character set
╭─[entry #11:1:1]
1 │ {alg: "HS256", type: "JWT"} | to json -r | encode base64 --character-set invalid-character-set
· ──────────┬──────────
· ╰── invalid-character-set is not a valid character-set.
Please use `help hash base64` to see a list of valid character sets.
╰────
```
but `hash base64` is now a deprecated command, see `help hash base64`.
=> **this PR changes the error message to mention `help encode base64`,
where the list of valid character sets is, instead**
# User-Facing Changes
```
$nothing
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace`
# After Submitting
```
$nothing
```
This PR adds tests to confirm that:
1. `http get` does the right thing (bail) when it encounters common SSL
errors
2. the `--insecure` flag works to ignore SSL errors
It's prompted by #8098, where `--insecure` stopped working and we didn't
notice until it was reported by a user.
## Deets + considerations
This PR uses [badssl.com](https://badssl.com/), a very handy website
affiliated with the Google Chrome team. The badssl authors mention that
stability is not guaranteed:
> Most subdomains are likely to have stable functionality, but anything
could change without notice.
I suspect that the badssl.com subdomains I've chosen will be stable
enough in practice. Can revisit this if the tests end up being flaky.
This PR does mean our tests are now making an external network call...
which I _think_ is OK. Our CI isn't exactly designed for offline
machines; test runners already have to download a bunch of crates etc. I
think the new tests are quick enough:
Fixes#8341.
The `CustomValue::to_json()` function is an odd duck; it defaults to
returning `null`, and no `CustomValue` implementations override it to do
anything useful. I forgot to implement `to_json()` for `SQLiteDatabase`,
so `open foo.db | to json` was returning `null`.
To fix this, I've removed `CustomValue::to_json()` and now `to json`
will collect a `CustomValue` into a regular `Value` before doing a JSON
conversion.
Continuation of #8229 and #8326
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
# Call to action
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Commits (so far)
- Remove `ShellError::FeatureNotEnabled`
- Name fields on `SE::ExternalNotSupported`
- Name field on `SE::InvalidProbability`
- Name fields on `SE::NushellFailed` variants
- Remove unused `SE::NushellFailedSpannedHelp`
- Name field on `SE::VariableNotFoundAtRuntime`
- Name fields on `SE::EnvVarNotFoundAtRuntime`
- Name fields on `SE::ModuleNotFoundAtRuntime`
- Remove usused `ModuleOrOverlayNotFoundAtRuntime`
- Name fields on `SE::OverlayNotFoundAtRuntime`
- Name field on `SE::NotFound`
Continuation of #8229
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
- Name fields of `SE::IncorrectValue`
- Merge and name fields on `SE::TypeMismatch`
- Name fields on `SE::UnsupportedOperator`
- Name fields on `AssignmentRequires*` and fix doc
- Name fields on `SE::UnknownOperator`
- Name fields on `SE::MissingParameter`
- Name fields on `SE::DelimiterError`
- Name fields on `SE::IncompatibleParametersSingle`
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
Bumps [rust-embed](https://github.com/pyros2097/rust-embed) from 6.4.1
to 6.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pyrossh/rust-embed/blob/master/changelog.md">rust-embed's
changelog</a>.</em></p>
<blockquote>
<h2>[6.6.0] - 2023-03-05</h2>
<ul>
<li>sort_by_file_name() requires walkdir v2.3.2 <a
href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/206">#206</a></li>
<li>Add <code>mime-guess</code> feature to statically store mimetype <a
href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/192">#192</a></li>
</ul>
<h2>[6.4.2] - 2022-10-20</h2>
<ul>
<li>Fail the proc macro if include/exclude are used without the feature
<a
href="https://github-redirect.dependabot.com/pyrossh/rust-embed/issues/187">#187</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/pyros2097/rust-embed/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [rayon](https://github.com/rayon-rs/rayon) from 1.6.1 to 1.7.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rayon-rs/rayon/blob/master/RELEASES.md">rayon's
changelog</a>.</em></p>
<blockquote>
<h1>Release rayon 1.7.0 / rayon-core 1.11.0 (2023-03-03)</h1>
<ul>
<li>The minimum supported <code>rustc</code> is now 1.59.</li>
<li>Added a fallback when threading is unsupported.</li>
<li>The new <code>ParallelIterator::take_any</code> and
<code>skip_any</code> methods work like
unordered <code>IndexedParallelIterator::take</code> and
<code>skip</code>, counting items in
whatever order they are visited in parallel.</li>
<li>The new <code>ParallelIterator::take_any_while</code> and
<code>skip_any_while</code> methods work
like unordered <code>Iterator::take_while</code> and
<code>skip_while</code>, which previously had
no parallel equivalent. The "while" condition may be satisfied
from anywhere
in the parallel iterator, affecting all future items regardless of
position.</li>
<li>The new <code>yield_now</code> and <code>yield_local</code>
functions will cooperatively yield
execution to Rayon, either trying to execute pending work from the
entire
pool or from just the local deques of the current thread,
respectively.</li>
</ul>
<h1>Release rayon-core 1.10.2 (2023-01-22)</h1>
<ul>
<li>Fixed miri-reported UB for SharedReadOnly tags protected by a
call.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7ffaf3463b"><code>7ffaf34</code></a>
Merge <a
href="https://github-redirect.dependabot.com/rayon-rs/rayon/issues/716">#716</a></li>
<li><a
href="163003e0e3"><code>163003e</code></a>
bump the release date</li>
<li><a
href="f7d75532fc"><code>f7d7553</code></a>
Release rayon 1.3.0 / rayon-core 1.7.0</li>
<li><a
href="b98bb23f05"><code>b98bb23</code></a>
Remove unneeded extern crate statements</li>
<li><a
href="9b92c7deb9"><code>9b92c7d</code></a>
cargo fmt</li>
<li><a
href="e02f439bbf"><code>e02f439</code></a>
Remove useless 'use crate;' in favor of the crate prelude</li>
<li><a
href="a1db0fe390"><code>a1db0fe</code></a>
Fix clippy::flat_map_identity</li>
<li><a
href="4e4025693f"><code>4e40256</code></a>
Update ci/compat-Cargo.lock</li>
<li><a
href="1f9d117d51"><code>1f9d117</code></a>
Remove cfg(rayon_unstable)</li>
<li><a
href="198ca7f6aa"><code>198ca7f</code></a>
Remove rayon-futures</li>
<li>Additional commits viewable in <a
href="https://github.com/rayon-rs/rayon/compare/rayon-core-v1.6.1...rayon-core-v1.7.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
I think this _might_ fix the issues we've been seeing with plugin tests.
In a nutshell, the plugin tests run `cargo build` to ensure that plugins
have been built:
f6ca62384e/crates/nu-test-support/src/commands.rs (L6)
This PR adds a mutex to ensure that we're never running `cargo build`
concurrently. It also uses an atomic bool to signal when plugins have
already been built, so we can avoid invoking `cargo build` multiple
times unnecessarily.
I can't be certain yet, but I'm guessing the macOS CI problems we've
been seeing come from plugin tests clobbering each other (something
like: test 1 builds the `foo` plugin, then test2 invokes `cargo build`
again and deletes the `foo` plugin from disk).
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
This pull request removes `Reqwest` and replaces it with `Ureq` to
remove some of our dependencies, giving us faster compile times as well
as smaller binaries. `Ureq` does not have an async runtime included so
we do not need build heavy dependencies such as `Tokio`. From older
tests I had the number of build units be reduced from `430 -> 392`.
The default of `Ureq` uses `Rustls` but it has been configured to
instead use `native_tls` which should work exactly the same as the `tls`
works now.
I removed `content-length` from the http commands as after refactoring i
did not see a reason to have it available, correct me if this is
something we should preserve.
In the medium, to long term, we should maybe consider changing to
`rustls` to have the same `tls` on all platforms.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Related to #8189.
Should close#8302.
Important to:
- have a complete `$nu` structure with all available information
- generate an accurate website, because the `make_docs.nu` script of
`nushell.github.io` uses `$nu.scope.command` to generate the pages of
https://nushell.sh/commands/
> **Note**
> i was looking for "scope" in the source of `nushell` to augment
`$nu.scope` and i found `crates/nu-engine/src/scope.rs` that defines
`nu_engine::scope::create_scope` which lead me to
`nu_engine::scope::ScopeData.collect_commands`.
> i hope this is the right file 😌
# Description
this PR slightly modifies
`nu_engine::scope::ScopeData.collect_commands`:
- add the "result" column to `$nu.scope.commands.examples`
- put the result of the example when a valid `Option(Value)`
- put a `Value::Nothing` when the result is set to `None` in the source
of the command
# User-Facing Changes
users can now access the results of all examples in
```bash
$nu.scope.commands | where name == <command> | get examples.0.result
```
## example...
### ...with a command that defines examples: `merge`
```bash
>_ $nu.scope.commands | where name == merge | get examples.0 | reject description | table --expand
╭───┬────────────────────────────────────────────────────────┬───────────────────────────╮
│ # │ example │ result │
├───┼────────────────────────────────────────────────────────┼───────────────────────────┤
│ 0 │ [a b c] | wrap name | merge ( [1 2 3] | wrap index ) │ ╭───┬──────╮ │
│ │ │ │ # │ name │ │
│ │ │ ├───┼──────┤ │
│ │ │ │ 1 │ a │ │
│ │ │ │ 2 │ b │ │
│ │ │ │ 3 │ c │ │
│ │ │ ╰───┴──────╯ │
│ 1 │ {a: 1, b: 2} | merge {c: 3} │ ╭───┬───╮ │
│ │ │ │ a │ 1 │ │
│ │ │ │ b │ 2 │ │
│ │ │ │ c │ 3 │ │
│ │ │ ╰───┴───╯ │
│ 2 │ [{columnA: A0 columnB: B0}] | merge [{columnA: 'A0*'}] │ ╭───┬─────────┬─────────╮ │
│ │ │ │ # │ columnA │ columnB │ │
│ │ │ ├───┼─────────┼─────────┤ │
│ │ │ │ 0 │ A0* │ B0 │ │
│ │ │ ╰───┴─────────┴─────────╯ │
╰───┴────────────────────────────────────────────────────────┴───────────────────────────╯
```
and we can check that these are "true" results and not just string, e.g.
```bash
>_ $nu.scope.commands | where name == merge | get examples.0.result.0 | describe
table<name: string, index: int>
```
### ...with a command without any example: `open`
```bash
>_ $nu.scope.commands | where name == open | get examples.0 | reject description | table --expand
╭───┬──────────────────────────────────────┬────────╮
│ # │ example │ result │
├───┼──────────────────────────────────────┼────────┤
│ 0 │ open myfile.json │ │
│ 1 │ open myfile.json --raw │ │
│ 2 │ 'myfile.txt' | open │ │
│ 3 │ open myfile.txt --raw | decode utf-8 │ │
╰───┴──────────────────────────────────────┴────────╯
```
and same thing, we can check that there is `$nothing` in this last
command
```bash
>_ $nu.scope.commands | where name == open | get examples.0.result.0 | describe
table<name: string, index: int>
```
# Tests + Formatting
- ✔️ `cargo fmt --all`
- ✔️ `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- ✔️ `cargo test --workspace` (~~currently running~~)
# After Submitting
the documentation would have to be regenerated!
# Description
No real changes, just some cleanup while I was looking at the code of
the command.
# User-Facing Changes
Remove the attribute 'pkg_version', since it's already exposed through
'version'.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Command: `cargo clippy --workspace --all-targets`
Resolve those warnings:
```
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> crates/nu-parser/tests/test_parser.rs:86:59
|
86 | compare_rhs_binaryOp(test_tag, &expected_val, &observed_val);
| ^^^^^^^^^^^^^ help: change this to: `observed_val`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
= note: `#[warn(clippy::needless_borrow)]` on by default
warning: `assert!(false, ..)` should probably be replaced
--> crates/nu-cli/src/completions/command_completions.rs:319:17
|
319 | assert!(false, "Merge delta has failed: {}", err);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: use `panic!(..)` or `unreachable!(..)`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assertions_on_constants
= note: `#[warn(clippy::assertions_on_constants)]` on by default
warning: 1 warning emitted
warning: `assert!(false, ..)` should probably be replaced
--> crates/nu-cli/src/completions/completer.rs:600:13
|
600 | assert!(false, "Error merging delta: {:?}", err);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: use `panic!(..)` or `unreachable!(..)`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assertions_on_constants
warning: length comparison to zero
--> crates/nu-cli/src/completions/completer.rs:620:24
|
620 | assert_eq!(result.len() > 0, has_result, "line: {}", line);
| ^^^^^^^^^^^^^^^^ help: using `!is_empty` is clearer and more explicit: `!result.is_empty()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
= note: `#[warn(clippy::len_zero)]` on by default
warning: equality checks against true are unnecessary
--> crates/nu-cli/src/completions/completer.rs:632:33
|
632 | .filter(|x| *x == true)
| ^^^^^^^^^^ help: try simplifying it as shown: `*x`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bool_comparison
= note: `#[warn(clippy::bool_comparison)]` on by default
Checking nu v0.76.1 (/home/jaudiger/Development/git-repositories/jaudiger/nushell)
warning: 4 warnings emitted
warning: the borrowed expression implements the required traits
--> crates/nu-command/tests/commands/cp.rs:26:40
|
26 | let first_hash = get_file_hash(&test_file.display());
| ^^^^^^^^^^^^^^^^^^^^ help: change this to: `test_file.display()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
= note: `#[warn(clippy::needless_borrow)]` on by default
warning: the borrowed expression implements the required traits
--> crates/nu-command/tests/commands/cp.rs:178:13
|
178 | &jonathans_expected_copied_dir
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: change this to: `jonathans_expected_copied_dir`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
warning: the borrowed expression implements the required traits
--> crates/nu-command/tests/commands/cp.rs:182:13
|
182 | &andres_expected_copied_dir
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: change this to: `andres_expected_copied_dir`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
warning: the borrowed expression implements the required traits
--> crates/nu-command/tests/commands/cp.rs:186:13
|
186 | &yehudas_expected_copied_dir
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: change this to: `yehudas_expected_copied_dir`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
warning: 4 warnings emitted
```
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Remove unnecessary memory allocation
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: None <>
# Description
Have `print` print it's input, so it's easier to print a pipeline (esp
after we land #8292 and related)
# User-Facing Changes
`print` will now print its input, if there are no args given
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While looking at the recent MR merged, I noticed that a dependency was
no more used with https://github.com/nushell/nushell/pull/8280.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
```
Error: nu::parser::not_a_constant (link)
× Not a constant.
╭─[entry #23:1:1]
1 │ let file = "/home/user/file"; source $file
· ──┬──
· ╰── Value is not a parse-time constant
╰────
help: Only a subset of expressions are allowed
constants during parsing. Try using the 'let'
command or typing the value literally.
```
this pr changes the help message to 'Try using the `const` command ...'
# Description
Following the comment from @fdncred:
https://github.com/nushell/nushell/pull/8144#issuecomment-1442514338. I
added some unit tests for HTTP commands. The tests are not exhaustive,
but at least, this is a first good step IMO.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This commit changes the `PROMPT_INDICATOR` and
`PROMPT_INDICATOR_VI_NORMAL` in the default_env and sample_login files.
It also changes its missing fallback in the prompt.rs file.
This has the intention of making the default prompt friendlier when
dealing with basic terminals that may not support displaying a huge
range of the Unicode standard, or users who don't want to get out of
their way to install custom fonts for their terminals. It's also
nicer/more balanced on the eyes, to me, and brings it in line with the
logo of nushell `nu>`.
# User-Facing Changes
New installations of nushell will have > as the default prompt
indicator, and running `config reset` will also change it. This might be
confusing for a few seconds, it could be minor enough that it just feels
slightly off. Anyone who has, for some reason, unset the
PROMPT_INDICATOR variable, or set it to $nothing, will also receive the
`>` treatment.
Users running on basic terminals (like cmd.exe on Windows 10) should no
longer face font issues with the default basic prompt.
# Drawbacks
The Unicode arrow is pretty cool. And it predates many of us. Maybe it's
worth keeping. One argument I could see, and mildly disagree with, is
that it might make users lean towards installing a modern font for their
terminal which will would have good consequences in the future.
# Description
we've discussed a bit about the location of the standard library in the
#standard-library channel of the discord server => **the previous
location, `crates/nu-utils/src/sample_config/`, was a bit confusing**
- is `std.nu` a config file, just as `default_config.nu` or
`default_env.nu`?
- what is this `tests.nu` file inside the `sample_config/`?
in this PR, i propose moving the standard library to
`crates/nu-utils/standard_library/` for a few reasons:
- `std.nu` is not a config file, so it should not be next to config
files in a `sample_config/` directory
- `tests.nu` is confusing if mixed with other unrelated files
- `crates/nu-utils/` appears to be a good place for the standard library
as it is meant to be a tool for `nushell`
- i thought it would be strange to have `std.nu` inside
`crates/nu-utils/src/` as this directory is generally filled with `rust`
files, right?
these are the reasons why i choose to propose
`crates/nu-utils/standard_library/` 😋
# User-Facing Changes
the standard library is now used with
```bash
use crates/nu-utils/standard_library/std.nu
```
and the tests are run with
```bash
nu crates/nu-utils/standard_library/tests.nu
```
# Tests + Formatting
```bash
$nothing
```
# After Submitting
```bash
$nothing
```
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
Feel free to add review comments if you spot inconsistent use of
`ShellError` variants.
- Name fields on `ShellError::OperatorOverflow`
- Name fields on `ShellError::PipelineMismatch`
- Add doc to `ShellError::OnlySupportsThisInputType`
- Name `ShellError::OnlySupportsThisInputType`
- Name field on `ShellError::PipelineEmpty`
- Comment about issues with `TypeMismatch*`
- Fix a few `exp_input_type`s
- Name fields on `ShellError::InvalidRange`
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
@fdncred pointed out to me that post creation of the nu-cmd-lang crate
we probably don't need an extra build.rs
file in nu-command any longer now that the version command (and
build.rs) is located in nu-cmd-lang...
I am removing the redundancy...
# Description
Removes the `env` command, as the `$env` is generally a much better
experience.
# User-Facing Changes
Breaking change: Removes `env`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Working on uniformizing the ending messages regarding methods usage()
and extra_usage(). This is related to the issue
https://github.com/nushell/nushell/issues/5066 after discussing it with
@jntrnr
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
#8258
Math floor and ceil return int types rather than floats.
# User-Facing Changes
Before:
```
/home/rdevenney/projects/open_source/nushell〉[(3.14 | math ceil | describe),
(3.14 | math floor | describe),
(3 | math ceil | describe),
(3 | math floor | describe)]
╭───┬───────╮
│ 0 │ float │
│ 1 │ float │
│ 2 │ int │
│ 3 │ int │
╰───┴───────╯
```
After:
```
/home/rdevenney/projects/open_source/nushell〉[(3.14 | math ceil | describe),
(3.14 | math floor | describe),
(3 | math ceil | describe),
(3 | math floor | describe)]
╭───┬─────╮
│ 0 │ int │
│ 1 │ int │
│ 2 │ int │
│ 3 │ int │
╰───┴─────╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This change fixes the bug associated with an incorrect span in
`type_mismatch` error message as described in #7288
The `span` argument in the method `into_value` was not being used to
convert a `PipelineData::Value` type so when called in
[eval_expression](https://github.com/nushell/nushell/blob/main/crates/nu-engine/src/eval.rs#L514-L515),
the original expression's span was not being used to overwrite the
result of `eval_subexpression`.
# User-Facing Changes
Using the example described in the issue, the whole bracketed
subexpression is correctly underlined.
Behavior before change:
```
let val = 10
($val | into string) + $val
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ ($val | into string) + $val
· ─────┬───── ┬ ──┬─
· │ │ ╰── int
· │ ╰── type mismatch for operator
· ╰── string
╰────
```
Behavior after change:
```
let val = 10
($val | into string) + $val
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ ($val | into string) + $val
· ──────────┬───────── ┬ ──┬─
· │ │ ╰── int
· │ ╰── type mismatch for operator
· ╰── string
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Follow up of https://github.com/nushell/nushell/pull/8255
Sorry about the max-time argument, I didn't pay attention to the
copy-paste. Regarding the insecure argument, the problem was before I
began to work on the refacto. My mistake was to not have tested this
argument.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
hello there 👋😋
as discussed over on the discord server, in `#standard-library`, there
is this new project of putting together a bunch of "_standard_" scripts
and functions and propose a `nushell` "_standard library_".
this PR is the first one in that direction 🎉
> **Note**
> ~~this PR is still a draft to have some feedback 😌~~
> this PR is now **READY FOR REVIEW** 🎉
# Description
this PR implements the following few commands:
- the `assert` familly with a private helper `_assert`
- a version of the `match` statement
i've also added some examples in the docstrings of the functions 👍
# User-Facing Changes
the standard library can now be used with
```bash
use crates/nu-utils/src/sample_config/std.nu
```
from the root of the `nushell` source
# Tests + Formatting
i've written a first draft of a
[`tests.nu`](https://github.com/amtoine/nushell/blob/feature/first-draft-of-the-standard-library/crates/nu-utils/src/sample_config/tests.nu)
module which
- tests the `assert` familly of function in `test_assert`
- tests the rest of the standard library in `tests`
the tests are run with
```bash
nu crates/nu-utils/src/sample_config/tests.nu
```
through the `main` function and should give no error 👍
> **Note**
> if you change one of the test line, there should be an error popping
when running the tests 😉
# After Submitting
> **Warning**
> to be coming
# Description
When the crate nu_cmd_lang crate was created last week example_test.rs
was copied over from nu_command
to nu_cmd_lang. By doing this there was a set of methods in
example_test.rs that existed in both crates...
This PR removes the redundancy by moving all of those duplicated methods
into the crate nu_test_support in a newly created file called
example_support.rs
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Below is the result of `into datetime --list | uniq -d`.
```
╭───┬───────────────┬─────────┬───────────────────────────────────────╮
│ # │ Specification │ Example │ Description │
├───┼───────────────┼─────────┼───────────────────────────────────────┤
│ 0 │ %Y │ 2023 │ The full proleptic Gregorian year, │
│ │ │ │ zero-padded to 4 digits. │
│ 1 │ %C │ 20 │ The proleptic Gregorian year divided │
│ │ │ │ by 100, zero-padded to 2 digits. │
╰───┴───────────────┴─────────┴───────────────────────────────────────╯
```
It's supposed to be an empty table, but it has two rows. I removed the
duplicates.
# User-Facing Changes
`into datetime --list` will print out a correct table.
# Description
This PR adds an alternative alias implementation. Old aliases still work
but you need to use `old-alias` instead of `alias`.
Instead of replacing spans in the original code and re-parsing, which
proved to be extremely error-prone and a constant source of panics, the
new implementation creates a new command that references the old
command. Consider the new alias defined as `alias ll = ls -l`. The
parser creates a new command called `ll` and remembers that it is
actually a `ls` command called with the `-l` flag. Then, when the parser
sees the `ll` command, it will translate it to `ls -l` and passes to it
any parameters that were passed to the call to `ll`. It works quite
similar to how known externals defined with `extern` are implemented.
The new alias implementation should work the same way as the old
aliases, including exporting from modules, referencing both known and
unknown externals. It seems to preserve custom completions and pipeline
metadata. It is quite robust in most cases but there are some rough
edges (see later).
Fixes https://github.com/nushell/nushell/issues/7648,
https://github.com/nushell/nushell/issues/8026,
https://github.com/nushell/nushell/issues/7512,
https://github.com/nushell/nushell/issues/5780,
https://github.com/nushell/nushell/issues/7754
No effect: https://github.com/nushell/nushell/issues/8122 (we might
revisit the completions code after this PR)
Should use custom command instead:
https://github.com/nushell/nushell/issues/6048
# User-Facing Changes
Since aliases are now basically commands, it has some new implications:
1. `alias spam = "spam"` (requires command call)
* **workaround**: use `alias spam = echo "spam"`
2. `def foo [] { 'foo' }; alias foo = ls -l` (foo defined more than
once)
* **workaround**: use different name (commands also have this
limitation)
4. `alias ls = (ls | sort-by type name -i)`
* **workaround**: Use custom command. _The common issue with this is
that it is currently not easy to pass flags through custom commands and
command referencing itself will lead to stack overflow. Both of these
issues are meant to be addressed._
5. TODO: Help messages, `which` command, `$nu.scope.aliases`, etc.
* Should we treat the aliases as commands or should they be separated
from regular commands?
6. Needs better error message and syntax highlight for recursed alias
(`alias f = f`)
7. Can't create alias with the same name as existing command (`alias ls
= ls -a`)
* Might be possible to add support for it (not 100% sure)
8. Standalone `alias` doesn't list aliases anymore
9. Can't alias parser keywords (e.g., stuff like `alias ou = overlay
use` won't work)
* TODO: Needs a better error message when attempting to do so
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Bumps [csv](https://github.com/BurntSushi/rust-csv) from 1.1.6 to 1.2.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="fa01b78533"><code>fa01b78</code></a>
1.2.0</li>
<li><a
href="2ba20b55d9"><code>2ba20b5</code></a>
readme: various updates</li>
<li><a
href="521294f87b"><code>521294f</code></a>
msrv: set rust-version = 1.60</li>
<li><a
href="31c8ebc49d"><code>31c8ebc</code></a>
readme: updates and set rust-version</li>
<li><a
href="a0e83883e2"><code>a0e8388</code></a>
deps: drop 'bstr'</li>
<li><a
href="9e1126a3f4"><code>9e1126a</code></a>
cargo: update some fields</li>
<li><a
href="d7a4f7dcc6"><code>d7a4f7d</code></a>
rust: move to 2021 edition</li>
<li><a
href="022ac05205"><code>022ac05</code></a>
error: drop 'source' impl</li>
<li><a
href="9ab83111a7"><code>9ab8311</code></a>
*: better import grouping and short hand struct init</li>
<li><a
href="ea0273c531"><code>ea0273c</code></a>
*: fix all warnings and update code</li>
<li>Additional commits viewable in <a
href="https://github.com/BurntSushi/rust-csv/compare/1.1.6...1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [bytesize](https://github.com/hyunsik/bytesize) from 1.1.0 to
1.2.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/hyunsik/bytesize/releases">bytesize's
releases</a>.</em></p>
<blockquote>
<h2>Release 1.2.0</h2>
<h2>Changes</h2>
<ul>
<li>serde improvements <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/29">#29</a>
(<a
href="https://github.com/joeroback"><code>@joeroback</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="476dc867b2"><code>476dc86</code></a>
Remove -dev suffix for release</li>
<li><a
href="eaaf3bc097"><code>eaaf3bc</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/29">#29</a>
from joeroback/serde_improvements</li>
<li><a
href="c7a785bd2c"><code>c7a785b</code></a>
resolves <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/27">#27</a>,
fixes several clippy warnings with u16/u8 and is_digit/is_ascii...</li>
<li><a
href="db44636f05"><code>db44636</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/hyunsik/bytesize/issues/28">#28</a>
from ileixe/master</li>
<li><a
href="58cf4a5024"><code>58cf4a5</code></a>
Change as_u64() to const</li>
<li><a
href="065c00b54f"><code>065c00b</code></a>
Change the crate version to 1.2.0-dev</li>
<li>See full diff in <a
href="https://github.com/hyunsik/bytesize/compare/v1.1.0...v1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [sysinfo](https://github.com/GuillaumeGomez/sysinfo) from 0.27.7
to 0.28.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/GuillaumeGomez/sysinfo/blob/master/CHANGELOG.md">sysinfo's
changelog</a>.</em></p>
<blockquote>
<h1>0.28.0</h1>
<ul>
<li>Linux: Fix name and CPU usage for processes tasks.</li>
<li>unix: Keep all users, even "not real" accounts.</li>
<li>Windows: Use SID for Users ID.</li>
<li>Fix C API.</li>
<li>Disable default cdylib compilation.</li>
<li>Add <code>serde</code> feature to enable serialization.</li>
<li>Linux: Handle <code>Idle</code> state in
<code>ProcessStatus</code>.</li>
<li>Linux: Add brand and name of ARM CPUs.</li>
</ul>
<h1>0.27.8</h1>
<ul>
<li>macOS: Fix overflow when computing CPU usage.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/GuillaumeGomez/sysinfo/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Fixes#8145, by disallowing any rows that are duplicated.
```
❯ ls | select 0 0
Error:
× Select only allows unique rows
╭─[entry #1:1:1]
1 │ ls | select 0 0
· ┬
· ╰── duplicated row
╰────
```
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
### What?
This change removes 3 flags (`--all`, `--both`, and `--format`) from
`str trim`. This is a net reduction of ~450 LoC and `str trim` no longer
depends on `fancy_regex`.
### Why?
I found these flags to be quite confusing when reviewing `str trim`
earlier today:
1. `--all` removes characters even if they're in the centre of the the
string.
- This is arguably not "trimming"! In all programming languages I'm
familiar with, trimming only affects the start and end of a string.
- If someone needs to do this, `str replace` is more natural IMO
2. `--both` trims from the left and right
- Confusing and unnecessary given that this is also the default
behaviour
3. `--format` replaces multiple spaces with a single space, even in the
centre of the string
- Again, I don't think this falls under the scope of "trimming". IMO
`str replace` is a more natural fit
I believe that `str trim` is simpler and easier to understand after this
change.
### Before
```
〉help str trim
Trim whitespace or specific character
Search terms: whitespace, strip, lstrip, rstrip
Usage:
> str trim {flags} ...(rest)
Flags:
-h, --help - Display the help message for this command
-c, --char <String> - character to trim (default: whitespace)
-l, --left - trims characters only from the beginning of the string
-r, --right - trims characters only from the end of the string
-a, --all - trims all characters from both sides of the string *and* in the middle
-b, --both - trims all characters from left and right side of the string
-f, --format - trims spaces replacing multiple characters with singles in the middle
```
### After
```
〉help str trim
Trim whitespace or specific character
Search terms: whitespace, strip, lstrip, rstrip
Usage:
> str trim {flags} ...(rest)
Flags:
-h, --help - Display the help message for this command
-c, --char <String> - character to trim (default: whitespace)
-l, --left - trims characters only from the beginning of the string
-r, --right - trims characters only from the end of the string
```
# Description
if you try to copy a big file with `cp` you will noticed that you can't
interrupt the process. This pull request fix that.
This was discuss here
https://github.com/nushell/nushell/pull/8012#issuecomment-1427313054
# User-Facing Changes
None
# Tests + Formatting
- Check - `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- Check - `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- Check - `cargo test --workspace` to check that all tests pass
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
Should close#8035.
> **Note**
> this is my first technical PR for `nushell`
> - i might very well miss things
> - i tried to be as complete as possible about the changes
> - please require further changes if i did something wrong, i'm open to
any remark 😌
# Description
this PR adds, when it is defined in the `examples` method of the
`Command` implementations, the output of the examples to the output of
the `help` command.
this PR
- only modifies `crates/nu-engine/src/documentation.rs` and the
`get_documentation` function
- defines a new `WD` constant to print a **W**hite **D**immed `...`
- a `match` statement at the end of the example loop to
- print a white dimmed `...` when the example is not set, i.e. set to
`None` in the `examples` method of the `Command` implementation of a
command
- pretty print the output of the associated example `Value` when it has
been defined
> **Warning**
> LIMITATIONS:
> - i use snippets from `crates/nu-protocol/src/pipeline_data.rs`
> - the table creation from `pub PipelineData::print`, i.e. the `let
decl_id = ...;` and `let table = ...;` in the change
> - the table item printing from `PipelineData::write_all_and_flush`,
i.e. the `for item in table { ... }`
>
> ADDRESSED:
> - ~~the formatting of the output is not perfect and has to be fully
left aligned with the first column for now~~ (fixed with
[`5abeefd558c34ba9bae15e2f183ff4625442921e`..`a62be1b5a2c730959da5dbc028bb91ffe5093f63`](5abeefd558c34ba9bae15e2f183ff4625442921e..a62be1b5a2c730959da5dbc028bb91ffe5093f63))
> - ~~i'm using `.unwrap()` on both the changes above, not sure how to
handle this for now~~ (fixed for now thanks to 49f1dc080)
> - ~~the tests and `clippy` checks do not pass for now, see below~~
(`clippy` now is happy with 49f1dc080 and the tests pass with
11666bc715)
# User-Facing Changes
the output of the `help <command>` command is now augmented with the
outputs of the examples, when they are defined.
- `with-env`
```bash
> help with-env
...
Examples:
Set the MYENV environment variable
> with-env [MYENV "my env value"] { $env.MYENV }
my env value
Set by primitive value list
> with-env [X Y W Z] { $env.X }
Y
Set by single row table
> with-env [[X W]; [Y Z]] { $env.W }
Z
Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
╭───┬───╮
│ 0 │ Y │
│ 1 │ Z │
╰───┴───╯
```
instead of the previous
```bash
> help with-env
...
Examples:
Set the MYENV environment variable
> with-env [MYENV "my env value"] { $env.MYENV }
Set by primitive value list
> with-env [X Y W Z] { $env.X }
Set by single row table
> with-env [[X W]; [Y Z]] { $env.W }
Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
- `merge`
```bash
> help merge
...
Examples:
Add an 'index' column to the input table
> [a b c] | wrap name | merge ( [1 2 3] | wrap index )
╭───┬──────╮
│ # │ name │
├───┼──────┤
│ 1 │ a │
│ 2 │ b │
│ 3 │ c │
╰───┴──────╯
Merge two records
> {a: 1, b: 2} | merge {c: 3}
╭───┬───╮
│ a │ 1 │
│ b │ 2 │
│ c │ 3 │
╰───┴───╯
Merge two tables, overwriting overlapping columns
> [{columnA: A0 columnB: B0}] | merge [{columnA: 'A0*'}]
╭───┬─────────┬─────────╮
│ # │ columnA │ columnB │
├───┼─────────┼─────────┤
│ 0 │ A0* │ B0 │
╰───┴─────────┴─────────╯
```
instead of the previous
```bash
> help merge
...
Examples:
Add an 'index' column to the input table
> [a b c] | wrap name | merge ( [1 2 3] | wrap index )
Merge two records
> {a: 1, b: 2} | merge {c: 3}
Merge two tables, overwriting overlapping columns
> [{columnA: A0 columnB: B0}] | merge [{columnA: 'A0*'}]
```
# Description
`bytes starts-with` converts the input into a `Value` before running
.starts_with to find if the binary matches. This has two side effects:
it makes the code simpler, only dealing in whole values, and simplifying
a lot of input pipeline handling and value transforming it would
otherwise have to do. _Especially_ in the presence of a cell path to
drill into. It also makes buffers the entire input into memory, which
can take up a lot of memory when dealing with large files, especially if
you only want to check the first few bytes (like for a magic number).
This PR adds a special branch on PipelineData::ExternalStream with a
streaming version of starts_with.
# User-Facing Changes
Opening large files and running bytes starts-with on them will not take
a long time.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# Drawbacks
Streaming checking is more complicated, and there may be bugs. I tested
it with multiple chunks with string data and binary data and it seems to
work alright up to 8k and over bytes, though.
The existing `operate` method still exists because the way it handles
cell paths and values is complicated. This causes some "code
duplication", or at least some intent duplication, between the value
code and the streaming code. This might be worthwhile considering the
performance gains (approaching infinity on larger inputs).
Another thing to consider is that my ExternalStream branch considers
string data as valid input. The operate branch only parses Binary
values, so it would fail. `open` is kind of unpredictable on whether it
returns string data or binary data, even when passing `--raw`. I think
this can be a problem but not really one I'm trying to tackle in this
PR, so, it's worth considering.
# Description
Fixes#8051.
# User-Facing Changes
You can now put command arguments into the EDITOR and VISUAL config /
env variables.
# Tests + Formatting
I don't know how to write tests for this. However, I set $env.EDITOR to
"nvim -R" and it seemed to work.
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#8202
# User-Facing Changes
`str starts-with` and `str ends-with` now has a `-i` switch.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While working on #8210 I noticed that we did not explicitly check a
number of `Value` variants for proper serialization and deserialization.
- Test filesize in `to/from nuon`
- Test duration in `from/to nuon`
- Test datetime in `from/to nuon`
- Test graceful failure of closure in `to nuon`
# User-Facing Changes
(-)
# Tests + Formatting
All about them tests
# Description
My terminal emulator happens to be called `st`
(https://st.suckless.org/) which breaks these tests for me
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The code to generate the nuon format supports writing range literals,
which obviates the need to expand the range as added in #8047
# User-Facing Changes
`to nuon` will still output ranges as literals
# Tests + Formatting
- Add test for `to nuon` range output
- Add `from nuon` test for range
fix typo in help messages
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
This PR addresses issue #2047 in order to enable autocomplete
functionality when using sudo for executing commands. I'e done a couple
of auxiliary checks such as ignoring whitespace and the last pipe in
order to determine the last command.
# User-Facing Changes
The only user facing change should be the autocomplete working.
# Tests + Formatting
All tests and formatting pass.
# Screenshots
<img width="454" alt="image"
src="https://user-images.githubusercontent.com/4399118/219404037-6cce4358-68a9-42bb-a09b-2986b10fa6cc.png">
# Suggestions welcome
I still don't know the in's and out's if nushell very well, any
suggestions for improvements are welcome.
# Description
Fixes#8002, which expands ranges `1..3` to expand to array-like when
saving and converting to json. Now,
```
> 1..3 | save foo.json
# foo.json
[
1,
2,
3
]
> 1..3 | to json
[
1,
2,
3
]
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7615
# Description
When calling external commands, we create a table from the pipeline data
to handle external commands expecting paginated input. When a binary
value is made into a table, we convert the vector of bytes representing
the binary bytes into a pretty formatted string. This results in the
pretty formatted string being sent to external commands instead of the
actual binary bytes. By checking whether the stdout of the call is being
redirected, we can decide whether to send the raw binary bytes or the
pretty formatted output when creating a table command.
# User-Facing Changes
When passing binary values to external commands, the external command
will receive the actual bytes instead of the pretty printed string. Use
cases that don't involve piping a binary value into an external command
are unchanged.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
cargo fmt --all -- --check to check standard code formatting (cargo fmt
--all applies these changes)
cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect to check that you're using the standard code
style
cargo test --workspace to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
For auto-generated documentation, move the `hash _` commands into the
Hash category
# User-Facing Changes
Apart from documentation, none.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR just fixes one `ansi` test so that the test runner will accept
it and test the scenario. No other changes.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
issue #8167
Remove the `(link)` to the docs for `ShellError` and `ParseError`. As
per discussion on the issue, the nu-parser version didn't update on the
docs causing deadlinks for those errors, which brought the usefullness
of these links into question and it was decided to remove all of them
that `derive(diagnostic)`.
# User-Facing Changes
Before:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter (link)
× Unbalanced delimiter.
╭─[entry #1:1:1]
1 │ ls | get name}
· ▲
· ╰── unbalanced { and }
╰────
```
After:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter
× Unbalanced delimiter.
╭─[entry #1:1:1]
1 │ ls | get name}
· ▲
· ╰── unbalanced { and }
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This breaks out the core_commands into a separate crate called
nu_cmd_lang
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Based on https://github.com/nushell/nushell/pull/8135.
Add the remaining HTTP commands:
- Head
- Patch
- Put
- Delete
It should finally resolve the issue
https://github.com/nushell/nushell/issues/2741
# User-Facing Changes
New sub HTTP commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Relative: #8060
While investigating, I found we need to update notify, which is a good
step to remove some duplicate dependencies.
As title, here are some goods and bads after updating:
## Good
keep dependency up to date, and remove duplidate dependency(cfg-if,
winapi) in Cargo.lock.
## Bad
Introduce some breaking changes:
After updating to notify v5, I found that we have to remove `Rename`
events.
But I've testing under notify v4, and it doesn't work good if we running
the following command on MacOS:
```
touch a
mv a b
```
It fires file create event, but no file rename event. So `rename` event
is not really reliable, so I think it's ok for us to remove `Rename`
events.
The reason to remove `--debounce-ms` flag:
It's not provided by defualt file watcher, we can use
[PollWatcher](https://docs.rs/notify/latest/notify/poll/struct.PollWatcher.html),
but it scans filesystem, which is really expensive. So I just remove the
flag.
# User-Facing Changes
1. `--debounce-ms` flag is removed
2. no longer watch `Rename` event.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# NOTE
Clean duplicate of #7825
Sorry about all the mess guys... I got confuse with GitHub and and ended
up mankind that mess.
This the same code I just cleaned the commits.
# Description
Progress bar implementation for the `cp` command. Now if the flag `-p`
or `--progress` is set, then the user will be able to see the progress
of the file or files being copy
# User-Facing Changes
A new flag (`--progress` `-p`) was added to the `cp` command
Examples:
```nu
cp -p test_file.txt test_folder_1\
cp -r -p test_folder\* test_folder_1\
cp -r -p -i test_folder\* test_folder_1\
```
## Notes
- The progress bar uses `std::io::{Read, Write}` instead of
`std::fs::copy` to get the progress. that means that when the progress
bar is used the copy process might be a bit slower.
- Progress bar for symbolic links TBD: Since symbolic links are usually
very light I think is not worth it to duplicate the function
`copy_symlink` just to add a progress bar that will be so fast to the
point is not needed, but.. for consistency purposes we might need to
added it, In that case I would have to pass the variable `progress` by
parameter (to not duplicate code unnecessary). If I do that i would have
to pass the `progress` var to every function to respect `copy_impl: impl
Fn(PathBuf, PathBuf, Span)`. Please let me know if this is not clear :p
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Yethal <nosuchemail@email.com>
# Description
Fixes: #8136
# User-Facing Changes
The following command
```
let VAR = ^cat non-existing-file; echo "failed"
```
will no longer output `failed` message
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
GH Issue: [#8074](https://github.com/nushell/nushell/issues/8074)
Adding SIGINT Ctrl + C functionality to *most* of the `input` command.
`input` with the flags `--suppress-output` and `--bytes-until` are
executed in raw mode which allows a ^C signal to be caught as it's
input, but an "optionless" call of `input` is using a standard
`read_line()` method that takes a ^C input and clears the buffer of any
data collected before the ^C. I'm more than happy to alter the
"optionless" call but putting it in raw mode hides the user input, so at
the moment that's unchanged.
# User-Facing Changes
Now ^C anywhere in the stdin stream will cause the command to SIGINT (as
long as the command isn't optionless), rather than being read in as part
of the input.
```
/home/rdevenney/projects/open_source/nushell〉input --suppress-output
Error: nu:🐚:io_error (link)
× I/O error
help: SIGINT
```
```
/home/rdevenney/projects/open_source/nushell〉input --bytes-until "a"
Error: nu:🐚:io_error (link)
× I/O error
help: SIGINT
```
As mentioned above, the default input behavior is the same.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
close#8034
So it's actually a work around to do "our best".
We basically try 3 attemps to build a table with each time truncating
values bigger then (termwidth/2, termwidth/4, termwidth/8).
PS1: The logic is kind of not ideal need to think about it.
_______________
PS2:
I've just noticed that multi-line key behaves strangely; (not sure
whether it's caused by this wrap (unlikely))
Need to investigate this.
I'd bet it's a multiline key.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
As title, making default config simpler, and user can get custom
completion from here:
https://github.com/nushell/nu_scripts/tree/main/custom-completions Or
using carapace
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This change sorts completions for files and directories by the ascending
ordering method, related to issue:
[#8023](https://github.com/nushell/nushell/issues/8023)
Currently the Suggestions are being sorted twice, so it's now following
the convention from `completion/base.rs` to match on the
`self.get_sort_by()` result.
# User-Facing Changes
Previously the suggestions were being sorted by the Levenshtein method:
```
/home/rdevenney/projects/open_source/nushell| cd
src/ wix/ docs/ tests/
assets/ crates/ docker/ images/
target/ benches/ pkg_mgrs/ .git/
.cargo/ .github/
```
Now when you tab for autocompletions, they show up in ascending
alphabetical order as shown below (with hidden files/folders at the
end).
```
/home/rdevenney/projects/open_source/nushell| cd
assets/ benches/ crates/ docker/
docs/ images/ pkg_mgrs/ src/
target/ tests/ wix/ .cargo/
.git/ .github/
```
And when you've already typed a bit of the path:
```
/home/rdevenney/projects/open_source/nushell| cd crates/nu
crates/nu-cli/ crates/nu-color-config/ crates/nu-command/
crates/nu-engine/ crates/nu-explore/ crates/nu-glob/
crates/nu-json/ crates/nu-parser/ crates/nu-path/
crates/nu-plugin/ crates/nu-pretty-hex/ crates/nu-protocol/
crates/nu-system/ crates/nu-table/ crates/nu-term-grid/
crates/nu-test-support/ crates/nu-utils/ crates/nu_plugin_custom_values/
crates/nu_plugin_example/ crates/nu_plugin_formats/ crates/nu_plugin_gstat/
crates/nu_plugin_inc/ crates/nu_plugin_python/ crates/nu_plugin_query/
```
And another for when there are files and directories present:
```
/home/rdevenney/projects/open_source/nushell/crates/nu-cli/src| nvim 02/16/2023 08:22:16 AM
commands.rs completions/ config_files.rs eval_file.rs
lib.rs menus/ nu_highlight.rs print.rs
prompt.rs prompt_update.rs reedline_config.rs repl.rs
syntax_highlight.rs util.rs validation.rs
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
[*] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
[*] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
[*] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
See title.
Also changed some misleading wording in `reject`'s help.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Previously `nix run nixpkgs#hello` was lexed as `Item, Item, Item,
Comment`, however, `#hello` is *not* supposed to be a comment here and
should be parsed as part of the third `Item`.
This change introduces this behavior by not interrupting the parse of
the current token upon seeing a `#`.
Thank you so much for considering this, I think many `nix` users will be
grateful for this change and I think this will lead to more adaptation
in the ecosystem.
- closes#8137 and #6335
# User-Facing Changes
- code like `somecode# bla` and `somecode#bla` will not be parsed as
`somecode, comment` but as `somecode#bla`, hence this is a breaking
change for all users who didn't put a space before a comment introducing
token (`#`)
# Tests + Formatting
I've added tests that cover this behavior in `test_lex.rs`
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
> If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
I think this is expected behavior in most other shells, so the
documentation was lacking for not documenting the unexpected behavior
before and hence now is automatically more complete >D
# Description
Final rework for https://github.com/nushell/nushell/issues/2741, after
this one, we'll add for free HTTP PUT, PATCH, DELETE and HEAD.
# User-Facing Changes
We can now post data using HTTP GET. I add some examples in the output
of `http get --help` to demonstrate this new behavior.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
closes#8153
This PR allows different types of lists, like `list<string>` and
`list<any>` to be appended with the `++=` operator.
## Before
```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
Error: nu::parser::type_mismatch (link)
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ $args ++= [ foo bar ]
· ─────┬─────
· ╰── expected list<any>, found list<string>
╰────
```
## After
```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
$args
╭───┬─────────────╮
│ 0 │ hello │
│ 1 │ hello\world │
│ 2 │ foo │
│ 3 │ bar │
╰───┴─────────────╯
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug where a default list in a custom command parameter
wasn't being accepted. The reason was because it was comparing specific
types of list like `list<any>` != `list<string>`. So, this PR attempts
to fix that.
### Before
```
> def f [param: list = [one]] { echo $param }
Error: nu::parser::assignment_mismatch (link)
× Default value wrong type
╭─[entry #1:1:1]
1 │ def f [param: list = [one]] { echo $param }
· ──┬──
· ╰── default value not list<any>
╰────
```
### After
```
> def f [param: list = [one]] {echo $param}
> f
╭───┬─────╮
│ 0 │ one │
╰───┴─────╯
```
closes#8092
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When reading parser code to see how it works, I found that
`parse_expression` function contains some duplicate code about function
call, we can match several values at once to simplify code
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the following message:
```
〉(ls).0 | into string
Error: nu:🐚:cant_convert (link)
× Can't convert to record.
╭─[entry #4:1:1]
1 │ (ls).0 | into string
· ─────┬─────
· ╰── can't convert string to record
╰────
help: try using the `to nuon` command
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The crate manifest didn't include vital information to publish to
crates.io
This now includes the basic description and license information
Before landing:
- [x] `reedline 0.16.0` is out and pinned.
- [x] all fixes and features necessary are landed.
In the meantime:
- [ ] feed the release notes with relevant features and breaking changes
Related to #8119.
Should address the review comment by @sholderbach from #8119.
# Description
this PR adds the output to the new example for the `with-env` command
introduced by #8119.
```bash
with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
should output
```bash
["Y", "Z"]
```
hence the proposition from @sholderbach, i.e.
```rust
Some(Value::list(
vec![Value::test_string("Y"), Value::test_string("Z")],
Span::test_data(),
))
```
# User-Facing Changes
_none_
# Tests + Formatting
not really a test, only the output value for the last `with-env` example
- ✔️ `cargo fmt --all`
- ✔️ `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- ✔️ `cargo test --workspace`
# After Submitting
_none_
# Description
While debugging #8139 I noticed that there was some error information
coming from the toml crate that we were not displaying. This would've
helped me to understand what was going on. So, this PR shows more
verbose errors when toml fails to parse.
### Before
```
cargo llvm-cov show-env | from toml
Error: nu:🐚:cant_convert (link)
× Can't convert to structured toml data.
╭─[entry #1:1:1]
1 │ cargo llvm-cov show-env | from toml
· ──┬──
· ╰── can't convert string to structured toml data
╰────
```
### After
```
cargo llvm-cov show-env | from toml
Error: nu:🐚:cant_convert (link)
× Can't convert to structured toml data.
╭─[entry #1:1:1]
1 │ cargo llvm-cov show-env | from toml
· ──┬──
· ╰── can't convert string to structured toml data
╰────
help: TOML parse error at line 2, column 24
|
2 | LLVM_PROFILE_FILE="C:\CarTar\nushell-%p-%m.profraw"
| ^
invalid escape sequence
expected `b`, `f`, `n`, `r`, `t`, `u`, `U`, `\`, `"`
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Enhancement of new `fill` command (#7846) to handle content including
ANSI escape codes for formatting or multi-code-point Unicode grapheme
clusters.
In both of these cases, the content is (many) bytes longer than its
visible length, and `fill` was counting the extra bytes so not adding
enough fill characters.
# Description
This script:
```rust
# the teacher emoji `\u{1F9D1}\u{200D}\u{1F3EB}` is 3 code points, but only 1 print position wide.
echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"\u{1F9D1}\u{200D}\u{1F3EB}" | fill -c "+" -w 3 -a "c"
echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"(ansi green)a(ansi reset)" | fill -c "+" -w 3 -a c
echo ""
```
Was producing this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
🧑🏫
This output should be 3 print positions wide, with leading and trailing `+`
a
```
After this PR, it produces this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
+🧑🏫+
This output should be 3 print positions wide, with leading and trailing `+`
+a+
```
# User-Facing Changes
Users may have to undo fixes they may have introduced to work around the
former behavior. I have one such in my prompt string that I can now
revert.
# Tests + Formatting
Don't forget to add tests that cover your changes.
-- Done
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
`fill` command not documented in the book, and it still talks about `str
lpad/rpad`. I'll fix.
Note added dependency on a new library `print-positions`, which is an
iterator that yields a complete print position (cluster + Ansi sequence)
per call. Should this be vendored?
Bumps [sysinfo](https://github.com/GuillaumeGomez/sysinfo) from 0.27.7
to 0.28.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/GuillaumeGomez/sysinfo/blob/master/CHANGELOG.md">sysinfo's
changelog</a>.</em></p>
<blockquote>
<h1>0.28.0</h1>
<ul>
<li>Linux: Fix name and CPU usage for processes tasks.</li>
<li>unix: Keep all users, even "not real" accounts.</li>
<li>Windows: Use SID for Users ID.</li>
<li>Fix C API.</li>
<li>Disable default cdylib compilation.</li>
<li>Add <code>serde</code> feature to enable serialization.</li>
<li>Linux: Handle <code>Idle</code> state in
<code>ProcessStatus</code>.</li>
<li>Linux: Add brand and name of ARM CPUs.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/GuillaumeGomez/sysinfo/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [winreg](https://github.com/gentoo90/winreg-rs) from 0.10.1 to
0.11.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/gentoo90/winreg-rs/blob/master/CHANGELOG.md">winreg's
changelog</a>.</em></p>
<blockquote>
<h2>0.11.0</h2>
<ul>
<li>Migrate to the 2018 edition of Rust</li>
<li>Move the code from <code>lib.rs</code> to separate files</li>
<li>Use <a
href="https://crates.io/crates/cfg-if"><code>cfg-if</code></a> instead
of <code>build.rs</code> to fail build on non-windows systems</li>
<li>Reimplement deserialization logic, implement [de]serialization for
byte arrays (<a
href="https://github-redirect.dependabot.com/gentoo90/winreg-rs/issues/49">#49</a>)</li>
<li>Fix some typos and <code>clippy</code> warnings</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f34742d674"><code>f34742d</code></a>
Bump version to 0.11.0</li>
<li><a
href="75f2593f62"><code>75f2593</code></a>
Move the changelog to a separate file</li>
<li><a
href="1f6f877ed7"><code>1f6f877</code></a>
Fix some clippy warnings</li>
<li><a
href="7a32d642cd"><code>7a32d64</code></a>
Implement [de]serialization for byte arrays</li>
<li><a
href="8464557c2d"><code>8464557</code></a>
Reimplement deserialization logic</li>
<li><a
href="9e8dc28029"><code>9e8dc28</code></a>
Put serialization tests into a separate file</li>
<li><a
href="04f7d232c7"><code>04f7d23</code></a>
Use <code>cfg-if</code> to fail build on non-windows systems</li>
<li><a
href="c3ac5ba5ea"><code>c3ac5ba</code></a>
Move the code from <code>lib.rs</code> to separate files</li>
<li><a
href="17378a9ca4"><code>17378a9</code></a>
Migrate to the 2018 edition of Rust</li>
<li><a
href="f4d45923ab"><code>f4d4592</code></a>
Remove Appveyor. It's broken anyway</li>
<li>Additional commits viewable in <a
href="https://github.com/gentoo90/winreg-rs/compare/v0.10.1...v0.11.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
hello there 👋😋
when messing around with `with-env`, looking at the examples, i did not
understand that we could directly run `with-env` with a record as the
argument and not from the input of a pipe 😮
even though the last example, i.e.
```bash
Set by row(e.g. `open x.json` or `from json`)
> '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
```
, is equivalent, just the record comes from the pipe, i thought adding
that explicite new example could be helpful 😌
# Description
looking at the single real change of this PR, i.e. 86ef34e90, you can
see i've simply added
```bash
Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
just before the example above
> **Note**
> i've also added spaces around the '|' in the last examples, from
> ```bash
> > '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
> ```
> to
> ```bash
> > '{"X":"Y","W":"Z"}' | from json | with-env $in { [$env.X $env.W] }
> ```
> hopefully making the pipeline a bit easier to read 👍
### hope you like that 😏
# User-Facing Changes
a new example has been added to `with-env`
# Tests + Formatting
no tests have been added
# After Submitting
the change should not affect the website, i think
=> if i need to generate the associated `HTML` file on
https://github.com/nushell/nushell.github.io, please tell me 😋
# Description
Reverts the PR #7779 which breaks subcommand completions. The issues
#7648 and #7754 thus still need fixing.
This reverts commit 8acced5.
# User-Facing Changes
Enables subcommand completions.
Unfortunately, also brings back the completion panic if alias is shorter
than the command name.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title..
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
In order to work on https://github.com/nushell/nushell/issues/2741, I'm
preparing the code.
# User-Facing Changes
Both commands do support the timeout option.
**But the timeout argument `-t, --timeout` has been migrated to `-m,
--max-time`**. I had to make a choice since there is another option
using the short command `t` which is "content-type".
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
close#8033
So as I said they suppose to be there;
I've basically added a change of style if --collapse is used.
PS: I guess it's worth to add tests so hold on if you'll plan to merge
it.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Fixes issue #7792 Fix basically by @kubouch , "stolen" by me :). Edit:
Added "proper" fix rather than the one liner
```
start Cargo.toml
// Opens in default editor
```
```
start https://www.google.com [alternative_browser]
// Opens page in default browser or another browser if specified
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
I noticed a bug in the default_config.nu while debugging something else.
The colors in the dark_theme should be named colors and not rgb colors.
Rgb colors prevents the dark theme from working properly in terminals
that don't support 24-bit aka rgb colors.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This does two fixes for bare words:
* It changes completions for paths to wrap a path with backticks if it
starts with a number. This helps bare words that start with numbers be
separate from unit values
* It allows bare words wrapped with backticks to be the name of a
command. Backtick values in command positions are no longer treated as
strings
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug that occurs if you pass `rename --column` and empty
list like `ls | rename -c []`.
## Before
```
> ls | rename -c []
thread 'main' panicked at 'index out of bounds: the len is 0 but the index is 0', crates\nu-command\src\filters\rename.rs:110:15
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
## After
```
> ls | rename -c []
Error: nu:🐚:type_mismatch (link)
× Type mismatch.
╭─[entry #1:1:1]
1 │ ls | rename -c []
· ─┬
· ╰── The list cannot be empty and must contain only two values: the column's name and its replacement value
╰────
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR tweaks how `ast` works a tiny bit by outputting values in stead
of eprintln!'s. It also moves the `ast` command into the folder with the
rest of the debug commands and changes the category to debug.
I started adding some tests but couldn't figure out a good way to do it
since every `ast` command contains spans that will be different on each
invocation.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Now that we've landed the debug commands we were working on, let's
relocate them to an easier place to find all of them. That's what this
PR does.
The only actual code change was changing the `timeit` command to a
`Category::Debug` command. The rest is just moving things around and
hooking them up.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, I found this feature is useful to me too :)
Closes: #8039
# User-Facing Changes
```
❯ 3 * "ab"
ababab
❯ 3 * [1 2 3]
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 1 │
│ 4 │ 2 │
│ 5 │ 3 │
│ 6 │ 1 │
│ 7 │ 2 │
│ 8 │ 3 │
╰───┴───╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Added a few syntax errors in ints and strings, changed parser to stop
and show that error rather than continue trying to parse those tokens as
some other shape. However, I don't see how to push this direction much
further, and most of the classic confusing errors can't be changed.
Flagged as WIP for the moment, but passes all checks and works better
than current release:
1. I have yet to figure out how to make these errors refer back to the
book, as I see some other errors do.
2. How to give syntax error when malformed int is first token in line?
Currently parsed as external command, user gets confusing error message.
3. Would like to be more strict with *decimal* int literals (lacking,
e.g, `0x' prefix). Need to tinker more with the order of parse shape
calls, currently, float is tried after int, so '1.4' has to be passed.
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
```bash
〉"\z"
Error:
╭─[entry #3:1:1]
1 │ "\z"
· ─┬─
· ╰── Syntax error in string, unrecognized character after escape '\'.
╰────
```
Canonic presentation of a syntax error.
```bash
〉" \u{01ffbogus}"
Error:
× Invalid syntax
╭─[entry #2:1:1]
1 │ " \u{01ffbogus}"
· ───────┬──────
· ╰── Syntax error in string, expecting 1 to 6 hex digits in unicode escape '\u{X...}', max value 10FFFF.
╰────
```
Malformed unicode escape in string, flagged as error.
String parse can be opinionated, it's the last shape tried.
```bash
〉0x22bogus
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #4:1:1]
1 │ 0x22bogus
· ────┬────
· ╰── executable was not found
╰────
help: No such file or directory (os error 2)
```
A *correct* number in first token would be evaluated, but an *incorrect*
one is treated as external command? Confusing to users.
```bash
〉0 + 0x22bogus
Error:
× Invalid syntax
╭─[entry #5:1:1]
1 │ 0 + 0x22bogus
· ────┬────
· ╰── Syntax error in int, invalid digits in radix 16 int.
╰────
```
Can give syntax error if token is unambiguously int literal. e.g has 0b
or 0x prefix, could not be a float.
```bash
〉0 + 098bogus
Error: nu::parser::unsupported_operation (link)
× Types mismatched for operation.
╭─[entry #6:1:1]
1 │ 0 + 098bogus
· ┬ ┬ ────┬───
· │ │ ╰── string
· │ ╰── doesn't support these values.
· ╰── int
╰────
help: Change int or string to be the right types and try again.
```
But *decimal* literal (no prefix) can't be too strict. Parser is going
to try float later. So '1.4' must be passed.
# User-Facing Changes
First and foremost, more specific error messages for typos in string and
int literals. Probably improves interactive user experience.
But a script that was causing and then checking for specific error might
notice a different error message.
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Added (positive and negative unit tests in `cargo test -p nu-parser`.
Didn't add integration tests.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
From nushell 0.8 philosophy:
https://github.com/nushell/nushell.github.io/blob/main/contributor-book/philosophy_0_80.md#core-categories
> The following categories should be moved to plugins:
Uncommon format support
So this pr is trying to move following commands to plugin:
- [X] from eml
- [x] from ics
- [x] from ini
- [x] from vcf
And we can have a new plugin handles for these formatting, currently
it's implemented here:
https://github.com/WindSoilder/nu_plugin_format
The command usage should be the same to original command.
If it's ok, the plugin can support more formats like
[parquet](https://github.com/fdncred/nu_plugin_from_parquet), or [EDN
format](https://github.com/nushell/nushell/issues/6415), or something
else.
Just create a draft pr to show what's the blueprint looks like, and is
it a good direction to move forward?
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Bumps [roxmltree](https://github.com/RazrFalcon/roxmltree) from 0.17.0
to 0.18.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/RazrFalcon/roxmltree/blob/master/CHANGELOG.md">roxmltree's
changelog</a>.</em></p>
<blockquote>
<h2>[0.18.0] - 2023-02-04</h2>
<h3>Added</h3>
<ul>
<li><code>StringStorage</code> that exposes an internal string
storage.</li>
<li>Allocated strings are stored as <code>Arc<str></code> and not
<code>String</code> now.</li>
<li><code>Node::text_storage</code></li>
<li><code>Node::tail_storage</code></li>
<li><code>Attribute::value_storage</code></li>
<li><code>Node::range</code></li>
</ul>
<h3>Removed</h3>
<ul>
<li><code>Node::position</code>. Use <code>Node::range</code>
instead.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Some methods return longer lifetimes now.
Thanks to <a
href="https://github.com/adamreichold"><code>@adamreichold</code></a></li>
<li>Overly verbose Debug implementations.
Thanks to <a
href="https://github.com/adamreichold"><code>@adamreichold</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8f6f14bbc7"><code>8f6f14b</code></a>
Version bump.</li>
<li><a
href="c4d622fccc"><code>c4d622f</code></a>
Store node's end position again.</li>
<li><a
href="3d33827a75"><code>3d33827</code></a>
Use ref-counted owned strings.</li>
<li><a
href="e81718610a"><code>e817186</code></a>
Expose 'input lifetime where it is the backing lifetime.</li>
<li><a
href="0b12673528"><code>0b12673</code></a>
Use consistent debug impls for the various iterators that avoid
formatting th...</li>
<li>See full diff in <a
href="https://github.com/RazrFalcon/roxmltree/compare/v0.17.0...v0.18.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
[//]: # (dependabot-start)
⚠️ **Dependabot is rebasing this PR** ⚠️
Rebasing might not happen immediately, so don't worry if this takes some
time.
Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.
---
[//]: # (dependabot-end)
Bumps [rstest](https://github.com/la10736/rstest) from 0.15.0 to 0.16.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/la10736/rstest/releases">rstest's
releases</a>.</em></p>
<blockquote>
<h2>0.16.0</h2>
<p>Use values expression to define test names.</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/la10736/rstest/blob/master/CHANGELOG.md">rstest's
changelog</a>.</em></p>
<blockquote>
<h2>[0.16.0] 2022/11/27</h2>
<h3>Changed</h3>
<ul>
<li>Show <code>TEST START</code> banner only when trace some argument:
See <a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/158">#158</a>
for details.</li>
<li>Add values to test name: See <a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/160">#160</a>
for details.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Updated test fixtures to 1.64.0 compiler's error messages.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d7ff088126"><code>d7ff088</code></a>
Update checkout list</li>
<li><a
href="4386575950"><code>4386575</code></a>
Version 0.16.0 chengelog</li>
<li><a
href="41749a881e"><code>41749a8</code></a>
Fix clippy warning</li>
<li><a
href="daaddde1a0"><code>daaddde</code></a>
Bump to 0.16.0 version and upgrade dependency</li>
<li><a
href="576768e4b3"><code>576768e</code></a>
Fixed dev dependency in rstest_macros</li>
<li><a
href="a6eb3a96cb"><code>a6eb3a9</code></a>
Update rstest_test version</li>
<li><a
href="4a18dd0bd1"><code>4a18dd0</code></a>
Update version</li>
<li><a
href="29648832ce"><code>2964883</code></a>
Update dependency version</li>
<li><a
href="5ad7e3fd61"><code>5ad7e3f</code></a>
<a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/160">#160</a>
Add test for module annotation</li>
<li><a
href="a302be019f"><code>a302be0</code></a>
<a
href="https://github-redirect.dependabot.com/la10736/rstest/issues/160">#160</a>
Tests fixed and add unit for allow</li>
<li>Additional commits viewable in <a
href="https://github.com/la10736/rstest/compare/0.15.0...0.16.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [proptest](https://github.com/proptest-rs/proptest) from 1.0.0 to
1.1.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="75c749ee50"><code>75c749e</code></a>
bump version to 1.1.0</li>
<li><a
href="a7c75a1bcb"><code>a7c75a1</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/295">#295</a>
from proptest-rs/replays-dont-count-cases</li>
<li><a
href="a854d2ed7a"><code>a854d2e</code></a>
[replays-dont-count-cases] persisted failures are not counted against
success...</li>
<li><a
href="f8eff50603"><code>f8eff50</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/291">#291</a>
from schuelermine/fix/prop_assert_ne!</li>
<li><a
href="d38268304c"><code>d382683</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/294">#294</a>
from proptest-rs/fix-ci</li>
<li><a
href="ad0a4d311c"><code>ad0a4d3</code></a>
[fix-ci] changed the line for where the error occurs</li>
<li><a
href="00f29af8e8"><code>00f29af</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/288">#288</a>
from proptest-rs/const-generic-arbitrary</li>
<li><a
href="a16853f4fc"><code>a16853f</code></a>
Fix prop_assert_ne! requiring import of prop_assert!</li>
<li><a
href="b513a32c72"><code>b513a32</code></a>
Config : support disabling failure persistence via env var (<a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/287">#287</a>)</li>
<li><a
href="7a94e16589"><code>7a94e16</code></a>
note that PROPTEST_CASES and other env var requires the std feature (<a
href="https://github-redirect.dependabot.com/proptest-rs/proptest/issues/262">#262</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/proptest-rs/proptest/compare/1.0.0...v1.1.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
[GH issue](https://github.com/nushell/nushell/issues/8027)
The current error message for a cd command includes a Debug output of
the `io::Error` being returned from `canonicalize_with`, so it's been
replaced with a more user friendly and readable depiction of the error.
# User-Facing Changes
As described in the issue, I've changed the error message for a cd into
a directory that does not exist from:
```
/home/rdevenney/projects/open_source/nushell〉cd asdfasdf 02/11/2023 08:59:59 PM
Error: nu:🐚:directory_not_found (link)
× Directory not found
╭─[entry #2:1:1]
1 │ cd asdfasdf
· ────┬───
· ╰── directory not found
╰────
help: IO Error: Os { code: 2, kind: NotFound, message: "No such file or directory" }
```
To:
```
/home/rdevenney/projects/open_source/nushell〉cd asdfasdf 02/11/2023 08:58:38 PM
Error: nu:🐚:directory_not_found (link)
× Directory not found
╭─[entry #1:1:1]
1 │ cd asdfasdf
· ────┬───
· ╰── directory not found
╰────
help: IO Error: DirectoryNotFound
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
This one fixes env not being hidden inside closure, reported in the
conversation under https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/7937 still persist. These
seems a bit more involved and might need hidden env tracking also in the
engine state... I'm not yet sure what's causing it.
Also re-enables some env-related tests and removes unused Value clone.
# User-Facing Changes
Just a bugfix
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Improve error when `str replace <pattern>` detects a problem with
<pattern>.
# User-Facing Changes
New "Incorrect value" error:
```
〉 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
Error: nu:🐚:incorrect_value (link)
× Incorrect value.
╭─[entry #1:1:1]
1 │ 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
· ─────┬────
· ╰── Regex error: Parsing error at position 4: Invalid hex escape
╰────
```
We could fruitfully replace some of the current uses of
`ShellError::UnsupportedInput` with this error. 'Incorrect value' is
different from 'wrong type'
# Tests + Formatting
Don't forget to add tests that cover your changes.
* none added / changed.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds a deprecated message to the `benchmark` command.
```
> benchmark
Error: nu:🐚:deprecated_command (link)
× Deprecated command benchmark
╭─[entry #1:1:1]
1 │ benchmark
· ────┬────
· ╰── 'benchmark' is deprecated. Please use 'timeit' instead.
╰────
```
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds a `profile` command that profiles each pipeline element of a block
and can also recursively step into child blocks.
# Limitations
* It is implemented using pipeline metadata which currently get lost in
some circumstances (e.g.,
https://github.com/nushell/nushell/issues/4501). This means that the
profiler will lose data coming from subexpressions. This issue will
hopefully be solved in the future.
* It also does not step into individual loop iteration which I'm not
sure why but maybe that's a good thing.
# User-Facing Changes
Shouldn't change any existing behavior.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
The purpose of this command is to help to debug pipelines. It works by
allowing you to inject the `inspect` command into a pipeline at any
point. Then it shows you what the input description is and what the
input values are that are passed into `inspect`. With each step it
prints this information out while also passing the value information on
to the next step in the pipeline.
This command is kind of a "hack job" because it clones maybe too much
and I had to get creative in order to output two different tables. I'm
sure there are many ways this can be improved or combined into other
commands but I wanted to start here. Note that the `inspect` output is
written to stderr and the normal nushell output is written to stdout. If
we were to output both to stdout, nushell would get confused.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR renames the `benchmark` command to the `time` command.
# User-Facing Changes
new command name
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As `register` does not have `--encoding` as an option now, the [*Git
stat plugin for
Nushell*](https://github.com/nushell/nushell/tree/main/crates/nu_plugin_gstat#git-stat-plugin-for-nushell)
is not correct anymore
```
> register ~/.local/share/cargo/bin/nu_plugin_gstat --encoding msgpack
Error: nu::parser::unknown_flag (link)
× The `register` command doesn't have flag `encoding`.
╭─[entry #22:1:1]
1 │ register ~/.local/share/cargo/bin/nu_plugin_gstat --encoding msgpack
· ─────┬────
· ╰── unknown flag
╰────
help: Available flags: --help(-h), --shell(-s). Use `--help` for more information.
```
This PR then simply removes `--encoding msgpack` from the `register`
call in the documentation of the `gstat` plugin.
# User-Facing Changes
There is no user-facing change in this PR.
# Tests + Formatting
This PR does not change any source code.
# After Submitting
Same here, nothing to report 😉
# Description
This PR changes the `metadata` command to a `Category::Debug` command
for better organization.
# User-Facing Changes
Just a different category.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
I noticed that `open some_big_file | into binary` cannot be cancelled
with `ctrl+c`.
This small PR fixes that by checking `ctrl+c` in
`RawStream::into_bytes()`, and does the same in
`RawStream::into_string()` for good measure.
# Description
The point of this command is to allow you to be able to format ints,
floats, filesizes, and strings with an alignment, padding, and a fill
character, as strings. It's meant to take the place of `str lpad` and
`str rpad`.
```
> help fill
Fill and Align
Search terms: display, render, format, pad, align
Usage:
> fill {flags}
Flags:
-h, --help - Display the help message for this command
-w, --width <Int> - The width of the output. Defaults to 1
-a, --alignment <String> - The alignment of the output. Defaults to Left (Left(l), Right(r), Center(c/m), MiddleRight(cr/mr))
-c, --character <String> - The character to fill with. Defaults to ' ' (space)
Signatures:
<number> | fill -> <string>
<string> | fill -> <string>
Examples:
Fill a string on the left side to a width of 15 with the character '─'
> 'nushell' | fill -a l -c '─' -w 15
Fill a string on the right side to a width of 15 with the character '─'
> 'nushell' | fill -a r -c '─' -w 15
Fill a string on both sides to a width of 15 with the character '─'
> 'nushell' | fill -a m -c '─' -w 15
Fill a number on the left side to a width of 5 with the character '0'
> 1 | fill --alignment right --character 0 --width 5
Fill a filesize on the left side to a width of 5 with the character '0'
> 1kib | fill --alignment middle --character 0 --width 10
```
# User-Facing Changes
Deprecated `str lpad` and `str rpad`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR makes `++` (the append operator) work with strings and binary
values. Can now do things like:
```bash
〉"a" ++ "b"
ab
〉0x[01 02] ++ 0x[03]
Length: 3 (0x3) bytes | printable whitespace ascii_other non_ascii
00000000: 01 02 03 •••
```
Closes#8015.
Bumps [ical](https://github.com/Peltoche/ical-rs) from 0.7.0 to 0.8.0.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/Peltoche/ical-rs/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR does the following:
1. Adds a new command called `view span` - which shows what is at the
location of the span parameters
2. Adds a new command called `view` - which just lists all the `view`
commands.
3. Renames `view-source` to `view source`.
4. Adds a new command called `view files` - which shows you what files
are loaded into nushell's EngineState memory.
5. Added a `Category::Debug` and put these commands (and others) into
it. (`inspect` needs to be added to it, but it's not landed yet)
Spans are important to nushell. One of their uses is to show where
errors are. For instance, in this example, the leader lines pointing to
parts of the command line are able to point to `10`, `/`, and `"bob"`
because each of those items have a span.
```
> 10 / "bob"
Error: nu::parser::unsupported_operation (link)
× Types mismatched for operation.
╭─[entry #8:1:1]
1 │ 10 / "bob"
· ─┬ ┬ ──┬──
· │ │ ╰── string
· │ ╰── doesn't support these values.
· ╰── int
╰────
help: Change int or string to be the right types and try again.
```
# Examples
## view span
Example:
```
> $env.config | get keybindings | first | debug -r
... bunch of stuff
span: Span {
start: 68065,
end: 68090,
},
},
],
span: Span {
start: 68050,
end: 68101,
},
},
],
span: Span {
start: 67927,
end: 68108,
},
}
```
To view the last span:
```
> view span 67927 68108
{
name: clear_everything
modifier: control
keycode: char_l
mode: emacs
event: [
{ send: clearscrollback }
]
}
```
> To view the 2nd to last span:
```
view span 68065 68090
{ send: clearscrollback }
```
> To view the 3rd to last span:
```
view span 68050 68101
[
{ send: clearscrollback }
]
```
## view files
```
> view files
╭────┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├────┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
│ 10 │ entry #1 │ 127561 │ 127585 │ 24 │
│ 11 │ entry #2 │ 127585 │ 127595 │ 10 │
╰────┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
`entry #x` will be each command you type in the repl (i think). so, it
may be good to filter those out sometimes.
```
> view files | where filename !~ entry
╭───┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├───┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
╰───┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
# User-Facing Changes
I renamed `view-source` to `view source` just to make a group of
commands. No functionality has changed in `view source`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Added fix for #7981 - Replaced crate serde_ini with rust-ini for package
nu-command/from
# Tests + Formatting
Added a test to support addition of the rust-ini crate.
`cargo test --package nu-command --lib -- formats::from::ini::tests
--nocapture`
Executed all tests.
`cargo test --workspace`
---------
Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
# Description
Fixes#7864. Haven't removed redundant code yet; and there's also a
weird visual bug, but I'm not sure if that's the fault of this PR or
just a quirk of how tabling works:
```
/home/gabriel/CodingProjects/nushell〉ping 1.1.1.1 | parse -r '(?P<num>\d+) ttl' 01/27/2023 11:28:31 AM
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 0 │ 1 │
│ 1 │ 2 │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 2 │ 3 │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 3 │ 4 │
│ 4 │ 5 │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 5 │ 6 │
│ 6 │ 7 │
╰───┴─────╯
^C
/home/gabriel/CodingProjects/nushell〉 01/27/2023 11:28:59 AM
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR attempts to fix the completions issue where, on Windows,
completions wouldn't get generated from items in your path environment
variable. This seemed to be down to `PATH` vs `Path`. So, I tried to add
a new function that we can use anywhere to avoid this problem.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, we can't provide examples for plugin commands, this pr would
make it possible
# User-Facing Changes
Take plugin `nu-example-1` as example:
```
❯ nu-example-1 -h
PluginSignature test 1 for plugin. Returns Value::Nothing
Usage:
> nu-example-1 {flags} <a> <b> (opt) ...(rest)
Flags:
-h, --help - Display the help message for this command
-f, --flag - a flag for the signature
-n, --named <String> - named string
Parameters:
a <int>: required integer value
b <string>: required string value
(optional) opt <int>: Optional number
...rest <string>: rest value string
Examples:
running example with an int value and string value
> nu-example-1 3 bb
```
The examples session is newly added.
## Basic idea behind these changes
when nushell query plugin signatures, plugin just returns it's signature
without any examples, so nushell have no idea about the examples of
plugin commands.
To adding the feature, we just making plugin returns it's signature with
examples.
Before:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<Signature>
```
After:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<PluginSignature>
```
When writing plugin signature to $nu.plugin-path:
Serialize `<PluginSignature>` rather than `<Signature>`, which would
enable us to serialize examples to `$nu.plugin-path`
## Shortcoming
It's a breaking changes because `Plugin::signature` is changed, and it
requires plugin authors to change their code for new signatures.
Fortunally it should be easy to change, for rust based plugin, we just
need to make a global replace from word `Signature` to word
`PluginSignature` in their plugin project.
Our content of plugin-path is really large, if one plugin have many
examples, it'd results to larger body of $nu.plugin-path, which is not
really scale. A solution would be save register information in other
binary formats rather than `json`. But I think it'd be another story.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR tries to resolve the overloading issue by going back to our
original naming convention for dataframes. So, this PR renames all
dataframe commands with a prefix of `dfr`. Some commands like `open-df`
were renamed to `dfr open` and things like `into df` were renamed `dfr
into-df`. I'm sure we can optimize naming a bit, but it seems to compile
now.
# User-Facing Changes
All dataframe commands are prefixed with dfr.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
~~I happened to be reviewing our uses of `thread::spawn()` and came to
the conclusion that we're spawning a thread unnecessarily for plugin
calls. We were basically doing this:~~
~~1. Spawn a background thread to send data to the plugin over stdin~~
~~2. Immediately do a blocking wait for the plugin's response~~
~~As far as I can tell, there's no point in spawning a thread for 1 (and
it may harm error handling) given that we're blocking right away for the
response.~~
**Update:** the logic is correct, as confirmed by @WindSoilder
[here](https://discord.com/channels/601130461678272522/855947301380947968/1072743414795350037).
I've added a comment explaining the thread usage.
Hi there,
The case which was presented must be addressed.
But I did not test it properly...
I'd encourage you to do so.
Take care.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
I factorized the HTTP client from HTTP Post and HTTP Get into a common
file, in order to reduce the code duplication. This PR has to be looked
commit by commit.
# User-Facing Changes
A new option has been to HTTP Get: `--insecure`. This option was already
available for HTTP Post command.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR is an incremental improvement to `ls` when it encounters
'illegal' file paths on Windows. Related:
https://github.com/nushell/nushell/issues/7869
## Context
We have trouble with filenames that Windows doesn't like, for example
[files with a `.` at the end of their
name](https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions).
To make a long story short, the Rust stdlib and several Win32 APIs will
choke if asked to do something with an illegal filepath. This is a
problem because files with illegal names can be created via other means
(like `touch foo.` in MINGW bash).
Previously `ls` would fail completely in a directory with a bad file,
which isn't great. After this PR, bad files get included in `ls` results
but without any metadata columns. This is not quite where we want to be
— eventually we want to be able to display file metadata for _all_ files
(even naughty ones) — but it's an improvement on the status quo.
### Before
### After
## Future work
Try the workarounds @ChrisDenton suggested:
https://github.com/nushell/nushell/issues/7869#issuecomment-1405977221
Some info on verbatim paths:
https://users.rust-lang.org/t/understanding-windows-paths/58583
## Testing
I tried to write a test for this, but it looks like our testing sandbox
can't create files with illegal filenames.😔 Here's the code in case it
proves useful someday:
```rust
/// Windows doesn't like certain file names, like file names ending with a period:
/// https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions
/// However, those files can still be created with tools like MINGW bash.
/// We may not be able to get full metadata for those files, but we should test that we can at least include them in ls results
#[test]
#[cfg(windows)]
fn can_list_illegal_files() {
Playground::setup("ls_test_all_columns", |dirs, sandbox| {
sandbox.with_files(vec![
EmptyFile("foo"),
EmptyFile("bar."),
EmptyFile("baz"),
]);
let actual = nu!(
cwd: dirs.test(),
"ls | length"
);
assert_eq!(actual.out, "3");
let actual = nu!(
cwd: dirs.test(),
"ls"
);
assert_eq!(actual.out, "1");
let actual = nu!(
cwd: dirs.test(),
"ls | where {|f| $f.name | str ends-with 'bar.'} | length"
);
assert_eq!(actual.out, "1");
})
}
```
I noticed that `$nu.loginshell-path` was using backward *and* forward
slashes on Windows.
#### Before
`C:\Users\reill\AppData\Roaming\nushell/login.nu`
#### After
`C:\Users\reill\AppData\Roaming\nushell\login.nu`
Fixed up 2 other similar issues while I was at it.
# Description
Fix#7953
Fix flags on `du` which should be positive and added some tests.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR will help report a bad date that can't be converted where the
error message says `* Unable to parse datetime`. This is helpful when
you're converting a big table and it fails somewhere that you really
can't see. I put it in `[]` so that when it's null, you can see that
there should be something there.
Before:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime
╭─[entry #1:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
After:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime: [Tue 1 0].
╭─[entry #4:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
# User-Facing Changes
New format for the error message.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Added fix for #7970 - Upgraded toml crate version from version from
0.5.8 to 0.7.1 for package nu-command
# Tests + Formatting
Added two tests to support the toml upgrade.
- `cargo test --package nu-command --lib -- formats::from::toml::tests
--nocapture`
Executed all tests.
- `cargo test --workspace`
---------
Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
# Description
I just updated a few examples linked to math commands.
I used the character of pi where possible, and I updated one example
since the example was misleading IMO (for the tau command).
# User-Facing Changes
Only examples have been updated, there is no real user changes.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Functionality added by @nabacg in #7961 already
h/t @YuriGeinishO for the example in #7933Closes#7933
# User-Facing Changes
None
# Tests + Formatting
+1 end to end example
# Description
`help <keyword>` will now search for `<keyword>` in aliases first, then
commands. This matches the way the parser resolves aliases before
commands.
# User-Facing Changes
Not significant
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
I opened this PR to unify the run command method. It's mainly to improve
consistency across the tree.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix for #7933. I've read through code and found the obvious difference
between them, where `each` command calls eval_with_early_return
e89e734ca2/crates/nu-command/src/filters/each.rs (L158),
while `reduce` command uses eval_block
e89e734ca2/crates/nu-command/src/filters/reduce.rs (L143)
That simple change seems to resolve the problem.
# User-Facing Changes
Allows the use of `return` in reduce closures, as per example in #7933
description. Arguably it's restoring consistency, than changing user
interface.
```
[1, 2] | reduce --fold null { |it, state|
::: if $it == 1 {
::: return 10
::: }
::: return ($it * $state)
::: }
20
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(cargo fmt --all applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#6768.
BEFORE:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [table 5 rows] │
╰─────┴────────────────╯
```
AFTER:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [list 5 items] │
╰─────┴────────────────╯
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Remove `--numbered` from ~~`for`~~, `each`, `par-each`, `reduce` and
`each while`. These all provide indexes (numbering) via the optional
second param to their closures.
EDIT: Closes#6986.
# User-Facing Changes
Every command that had `--numbered` listed as "deprecated" in their help
docs is affected.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This cleans up the `registry query` output so that it's more usable.
Before:
After:
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7874
It's because `do -i` doesn't handles `Pipeline::ListStream`
data(especially there is Value::Error inside the stream)
To fix it, we need to iterate through `ListStream`, check if there is
`Value::Error`. If so, just returns `Pipeline::empty()`
# User-Facing Changes
```
help commands | find arg | get search_terms | do -i { ansi strip }
```
No longer raises error.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Use the `use_ansi_coloring` configuration point to decide whether the
output will have colors, where possible.
Related: https://github.com/nushell/nushell/issues/7676
- [x] `grid -c`
- [x] `perf()`
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7301.
# User-Facing Changes
`return` can now be used in scripts without explicit `def main`.
# Tests + Formatting
Don't forget to add tests that cover your changes. (I'm not sure how to
test this.)
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7693
On `cp` commands there were two error which pass error message with
invalid detail about source and destination files . there error were for
Not exist file and Permission denied .
Examples:
Before :
Copy `source_file_valid` to `destination_invalid_dir` throw this error ;
`copy file "/source_file_valid" failed: No such file or directory (os
error 2) `
After this PR it will throw this if destination will be invalid :
`copying to destination "/destination_invalid_dir" failed: No such file
or directory (os error 2) `
it was for Permission denied too .
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Fixes: #7828
We delegate to `save` command to finish redirection, then if it runs to
success, the relative exit code is set to 0. To fix it, in redirection
context, we take exit_code stream before sending it to `save` command,
than manually returns `PipelineData::ExternalStream` to make nushell set
relative code properly.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Avoids duplication of `windows` crate and friends as it updates to the
most recent `windows 0.44` version.
# User-Facing Changes
None intended
# Description
Lint: `clippy::uninlined_format_args`
More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)
Alternative to #7865
# User-Facing Changes
None intended
# Tests + Formatting
(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
# Description
Just a couple clippy-recommended simplifications.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7886.
```
/home/gabriel/CodingProjects/nushell〉'A|B|C' | parse -r '(\w)\|(\w)\|(\w)' 01/29/2023 01:08:29 PM
╭───┬──────────┬──────────┬──────────╮
│ # │ capture0 │ capture1 │ capture2 │
├───┼──────────┼──────────┼──────────┤
│ 0 │ A │ B │ C │
╰───┴──────────┴──────────┴──────────╯
```
# User-Facing Changes
Columns automatically named by `parse -r` are now 0-indexec and
uncapitalised.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Relative:
`https://github.com/nushell/nushell/pull/7889#issuecomment-1407503567`
Make `search_terms` return empty string rather than nothing, so some
other command can handle it better
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #7841
# User-Facing Changes
new complete doc:
```
Complete the external piped in, collecting outputs and exit code
To collect stderr messages and exit_code, external piped in need to wrapped with `do`
Usage:
> complete
Flags:
-h, --help - Display the help message for this command
Signatures:
<any> | complete -> <record>
Examples:
Run the external completion
> ^external arg1 | complete
Run external completion, collects stderr and exit_code
> do { ^external arg1 } | complete
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
I tackled some of the disabled `FIXME`/`#[ignore]` tests. Most were
straightforward to re-enable, and a few of them did not deserve to be
re-enabled.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
I noticed that [it's pretty easy to name threads in
Rust](https://doc.rust-lang.org/std/thread/#naming-threads). We might as
well do this; it's a nice quality of life improvement when you're
profiling something and the developers took the time to give threads
names.
Also added/cleaned up some comments while I was in the area.
# Description
Support extended unicode escapes in strings with same syntax as Rust:
`"\u{6e}"`.
# User-Facing Changes
New syntax in string literals, `\u{NNNNNN}`, to go along with the
existing `\uNNNN`.
New syntax accepts 1-6 hex digits and rejects values greater than
0x10FFFF (max Unicode char)..
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
Won't break existing scripts, since this is new syntax.
We might consider deprecating `char -u`, since users can now embed
unicode chars > 0xFFFF with the new escape.
# Tests + Formatting
Several unit tests and one integration test added.
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
Done
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
Done
- [x] `cargo test --workspace` to check that all tests pass
Done
# After Submitting
- [ ] If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While investigating `do --ignore-errors` issue, just found that
`ansi_strip` command using a custom `operate` function(which is not
needed), this pr is just a refactor
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Add flags for filtering the output of `glob` by file type. I find myself
occasionally wanting to do this, and getting a file's
[file_type](https://docs.rs/wax/latest/wax/struct.WalkEntry.html#method.file_type)
is presumably fast to do as it doesn't have to go through the fallible
metadata method.
The design of the signature does concern me; it's not as readable as a
filter or "include" type list would be. They have to be filtered one by
one, which can be annoying if you only want files `-D -S`, or only want
folders `-F -S`, or only want symlinks `--butwhy?`. I considered
SyntaxShape::Keyword for this but I'll just defer to comments on this PR
if they pop up.
I'd also like to bring up performance since including these flags
technically incurs a `.filter` penalty on all glob calls, which could be
optimized out if we added a branch for the no-filters case. But in
reality I'd expect the file system to be the bottleneck and the flags to
be pretty branch predictor friendly, so eh
# User-Facing Changes
Three new flags when using `glob` and a slightly more cluttered help
page. No breaking changes, I hope.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds a `number` command that will enumerate the input, and add an
`index` and `item` record for each item. The `index` is the number of
the item in the input stream, and `item` is the original value of the
item.
```
> ls | number | get 14
╭───────┬────────────────────────────╮
│ index │ 14 │
│ │ ╭──────────┬─────────────╮ │
│ item │ │ name │ crates │ │
│ │ │ type │ dir │ │
│ │ │ size │ 832 B │ │
│ │ │ modified │ 2 weeks ago │ │
│ │ ╰──────────┴─────────────╯ │
╰───────┴────────────────────────────╯
```
# User-Facing Changes
This adds a `number` command.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Some general cleanup of `cd.rs`; the permission checking code was a
little hard to follow. Reworded comments and variable names,
reorganized+renamed the module used for Unix file permissions.
# Description
This PR bumps the required rust version to 1.66.1.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
fix#7858
Once again we here 😞
~~I am thinking is there some files with not flat structure we could use
to test table -e?
I mean it is clear it was a while ago were we had to create at least
some tests.
Do you have anything in mind (or maybe commands which is consistent
across systems)?~~
Take care
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Small fix. Related: #7699.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Relative #7210
Improve doc to clarify current behavior.
To flatten all nested levels, we can use the following custom
command(maybe making it into our lib):
```
def flatten_all_nested [input_table: any] {
mut input = $input_table
mut flattened = ($input | flatten --all)
while $input != $flattened {
$input = $flattened
$flattened = ($input | flatten --all)
}
$flattened
}
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7800 .
`to csv` and `to tsv` no longer:
- accept anything but records and tables as input,
- accept lists that are not tables,
- accept tables and records with values that are not primitives (other
lists, tables and records).
# User-Facing Changes
Using `to csv` and `to tsv` on any of inputs mentioned above will result
in `cant_convert` error.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
This adds the `SyntaxShape::Decimal` so you can create custom commands
with `decimal` types such as:
```shell
def cmd [x:decimal] { echo $x }
```
/cc @kurokirasama
Internally this is a little messy since we have `Type::Float` and
`SyntaxShape::Decimal`. I originally named it `float` and
`SyntaxShape::Float` but since we have `into decimal` and `1.1 |
describe` reports `decimal`, I decided to change the SyntaxShape.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Currently, if you run `do -i { sudo apt upgrade }`, stdin gets swallowed
and doesn't let you respond yes/no to the upgrade question. This PR
fixes that, but runs into https://github.com/nushell/nushell/issues/7205
so the tests fail.
Signed-off-by: Alex Saveau <saveau.alexandre@gmail.com>
# Description
This PR changes the old performance logging with `Instant` timers. I'm
not sure if this is the best way to do it but it does help reveal where
time is being spent on startup. This is what it looks like when you
launch nushell with `cargo run -- --log-level info`. I'm using the
`info` log level exclusively for performance monitoring at this point.
## After Startup
Since you're in the repl, you can continue running commands. Here's the
output of `ls`, for instance.
Note that the above screenshots are in debug mode, so they're much
slower than release.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR shows the startup time and decreases the banner. This startup
time output can be disabled with the `show_banner: false` setting in the
config. This is the startup in debug mode.
On my mac in release mode
```
Startup Time: 368ms 429µs 83ns
```
On my mac without a config as `nu --config foo --env-config foo`
```
Startup Time: 11ms 663µs 791ns
```
I could really go either way on this. If people don't like this change,
we don't have to merge it.
# User-Facing Changes
Startup Time
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Bumps [rayon](https://github.com/rayon-rs/rayon) from 1.5.3 to 1.6.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rayon-rs/rayon/blob/master/RELEASES.md">rayon's
changelog</a>.</em></p>
<blockquote>
<h1>Release rayon 1.6.1 (2022-12-09)</h1>
<ul>
<li>Simplified <code>par_bridge</code> to only pull one item at a time
from the iterator,
without batching. Threads that are waiting for iterator items will now
block
appropriately rather than spinning CPU. (Thanks <a
href="https://github.com/njaard"><code>@njaard</code></a>!)</li>
<li>Added protection against recursion in <code>par_bridge</code>, so
iterators that also
invoke rayon will not cause mutex recursion deadlocks.</li>
</ul>
<h1>Release rayon-core 1.10.1 (2022-11-18)</h1>
<ul>
<li>Fixed a race condition with threads going to sleep while a broadcast
starts.</li>
</ul>
<h1>Release rayon 1.6.0 / rayon-core 1.10.0 (2022-11-18)</h1>
<ul>
<li>The minimum supported <code>rustc</code> is now 1.56.</li>
<li>The new <code>IndexedParallelIterator::fold_chunks</code> and
<code>fold_chunks_with</code> methods
work like <code>ParallelIterator::fold</code> and <code>fold_with</code>
with fixed-size chunks of
items. This may be useful for predictable batching performance, without
the
allocation overhead of
<code>IndexedParallelIterator::chunks</code>.</li>
<li>New "broadcast" methods run a given function on all
threads in the pool.
These run at a sort of reduced priority after each thread has exhausted
their
local work queue, but before they attempt work-stealing from other
threads.
<ul>
<li>The global <code>broadcast</code> function and
<code>ThreadPool::broadcast</code> method will
block until completion, returning a <code>Vec</code> of all return
values.</li>
<li>The global <code>spawn_broadcast</code> function and methods on
<code>ThreadPool</code>, <code>Scope</code>,
and <code>ScopeFifo</code> will run detached, without blocking the
current thread.</li>
</ul>
</li>
<li>Panicking methods now use <code>#[track_caller]</code> to report the
caller's location.</li>
<li>Fixed a truncated length in <code>vec::Drain</code> when given an
empty range.</li>
</ul>
<h2>Contributors</h2>
<p>Thanks to all of the contributors for this release!</p>
<ul>
<li><a href="https://github.com/cuviper"><code>@cuviper</code></a></li>
<li><a
href="https://github.com/idanmuze"><code>@idanmuze</code></a></li>
<li><a href="https://github.com/JoeyBF"><code>@JoeyBF</code></a></li>
<li><a
href="https://github.com/JustForFun88"><code>@JustForFun88</code></a></li>
<li><a
href="https://github.com/kianmeng"><code>@kianmeng</code></a></li>
<li><a
href="https://github.com/kornelski"><code>@kornelski</code></a></li>
<li><a
href="https://github.com/ritchie46"><code>@ritchie46</code></a></li>
<li><a
href="https://github.com/ryanrussell"><code>@ryanrussell</code></a></li>
<li><a
href="https://github.com/steffahn"><code>@steffahn</code></a></li>
<li><a
href="https://github.com/TheIronBorn"><code>@TheIronBorn</code></a></li>
<li><a
href="https://github.com/willcrozi"><code>@willcrozi</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="401678ee55"><code>401678e</code></a>
Merge <a
href="https://github-redirect.dependabot.com/rayon-rs/rayon/issues/709">#709</a></li>
<li><a
href="33e9843413"><code>33e9843</code></a>
Release rayon 1.2.1 / rayon-core 1.6.1</li>
<li><a
href="dd874ac5d4"><code>dd874ac</code></a>
Bump crate versions and dependencies</li>
<li><a
href="0c6338d267"><code>0c6338d</code></a>
Reduce Option complexity in demo cpu_time</li>
<li><a
href="be99e500bf"><code>be99e50</code></a>
cargo fmt</li>
<li><a
href="9b4d9798de"><code>9b4d979</code></a>
Avoid mem::uninitialized in the demo cpu_time</li>
<li><a
href="5a466434ab"><code>5a46643</code></a>
Avoid mem::uninitialized in par_sort_unstable</li>
<li><a
href="73b1061a23"><code>73b1061</code></a>
Merge <a
href="https://github-redirect.dependabot.com/rayon-rs/rayon/issues/705">#705</a></li>
<li><a
href="54c0b0dc0c"><code>54c0b0d</code></a>
Make sure that compat-Cargo.lock is fresh</li>
<li><a
href="4fd13b0334"><code>4fd13b0</code></a>
Regenerate compat-Cargo.lock</li>
<li>Additional commits viewable in <a
href="https://github.com/rayon-rs/rayon/compare/v1.5.3...rayon-core-v1.6.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Closes#7762. See issue for motivation.
# User-Facing Changes
Something like this is now possible without having to split this into 2
commands:
```
fetch "https://www.gutenberg.org/files/11/11-0.txt" | benchmark { str downcase | split words | uniq -c | sort-by count --reverse | first 10 }
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
`src/locale_override.rs` is gated with `#![cfg(debug_assertions)]` but
`tests/get_system_locale.rs` is not; this makes `cargo test --release`
fails:
```
error[E0432]: unresolved import `nu_test_support::locale_override`
--> crates/nu-test-support/tests/get_system_locale.rs:1:22
|
1 | use nu_test_support::locale_override::with_locale_override;
| ^^^^^^^^^^^^^^^ could not find `locale_override` in `nu_test_support`
For more information about this error, try `rustc --explain E0432`.
error: could not compile `nu-test-support` due to previous error
warning: build failed, waiting for other jobs to finish...
```
With the change it now passes:
```
❯ cargo test --release
Compiling nu-test-support v0.74.1 (/home/michel/src/github/nushell/nushell/crates/nu-test-support)
Finished release [optimized] target(s) in 7.57s
Running unittests src/lib.rs (/home/michel/src/github/nushell/nushell/target/release/deps/nu_test_support-750505b13c102d2c)
running 3 tests
test tests::constructs_a_pipeline ... ok
test playground::tests::current_working_directory_back_to_root_from_anywhere ... ok
test playground::tests::current_working_directory_in_sandbox_directory_created ... ok
test result: ok. 3 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Running tests/get_system_locale.rs (/home/michel/src/github/nushell/nushell/target/release/deps/get_system_locale-e0ecabe312044fa8)
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
```
Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org>
# User-Facing Changes
N/A
Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org>
# Updated description by @rgwood
This PR changes `fetch` to `http get` and `post` to `http post`. `fetch`
and `post` are now deprecated. [I surveyed people on
Discord](https://discord.com/channels/601130461678272522/601130461678272524/1065706282566307910)
and users strongly approved of this change.
# Original Description
This PR is related to #2741 and my first pull request in rust :)
Implemented a new http mod to better http support and alias `fetch` and
`post` commands to `http get` and `http post` respectively.
# User-Facing Changes
Users will be able to use HTTP method via http command, for example
``` shell
> http get "https://www.example.com"
<!doctype html>
<html>
...
```
# Description
This PR fixes the signature display when running `help commands`. Before
this PR, there were leading spaces in the signatures column. Now,
they're left aligned for a cleaner look.
Before:
After:
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
BEFORE:
```
Subcommands:
str camel-case - Convert a string to camelCase
str capitalize - Capitalize first letter of text
str collect - 'str collect' is deprecated. Please use 'str join' instead.
str contains - Checks if string input contains a substring
str distance - Compare two strings and return the edit distance/Levenshtein distance
str downcase - Make text lowercase
str ends-with - Check if an input ends with a string
str find-replace - Deprecated command
str index-of - Returns start index of first occurrence of string in input, or -1 if no match
str join - Concatenate multiple strings into a single string, with an optional separator between each
str kebab-case - Convert a string to kebab-case
str length - Output the length of any strings in the pipeline
str lpad - Left-pad a string to a specific length
str pascal-case - Convert a string to PascalCase
str replace - Find and replace text
str reverse - Reverse every string in the pipeline
str rpad - Right-pad a string to a specific length
str screaming-snake-case - Convert a string to SCREAMING_SNAKE_CASE
str snake-case - Convert a string to snake_case
str starts-with - Check if an input starts with a string
str substring - Get part of a string. Note that the start is included but the end is excluded, and that the first character of a string is index 0.
str title-case - Convert a string to Title Case
str to-datetime - Deprecated command
str to-decimal - Deprecated command
str to-int - Deprecated command
str trim - Trim whitespace or specific character
str upcase - Make text uppercase
```
AFTER:
```
Subcommands:
str camel-case - Convert a string to camelCase
str capitalize - Capitalize first letter of text
str contains - Checks if string input contains a substring
str distance - Compare two strings and return the edit distance/Levenshtein distance
str downcase - Make text lowercase
str ends-with - Check if an input ends with a string
str index-of - Returns start index of first occurrence of string in input, or -1 if no match
str join - Concatenate multiple strings into a single string, with an optional separator between each
str kebab-case - Convert a string to kebab-case
str length - Output the length of any strings in the pipeline
str lpad - Left-pad a string to a specific length
str pascal-case - Convert a string to PascalCase
str replace - Find and replace text
str reverse - Reverse every string in the pipeline
str rpad - Right-pad a string to a specific length
str screaming-snake-case - Convert a string to SCREAMING_SNAKE_CASE
str snake-case - Convert a string to snake_case
str starts-with - Check if an input starts with a string
str substring - Get part of a string. Note that the start is included but the end is excluded, and that the first character of a string is index 0.
str title-case - Convert a string to Title Case
str trim - Trim whitespace or specific character
str upcase - Make text uppercase
```
The deprecated subcommands still exist, but are no longer listed in
`help` for the containing command.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7774. The functionality should be the same as feeding all
`PipelineDate::Value(Value::String(_,_),_)` into `lines` before putting
it into `find`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is an attempt to implement a new `Value::LazyRecord` variant for
performance reasons.
`LazyRecord` is like a regular `Record`, but it's possible to access
individual columns without evaluating other columns. I've implemented
`LazyRecord` for the special `$nu` variable; accessing `$nu` is
relatively slow because of all the information in `scope`, and [`$nu`
accounts for about 2/3 of Nu's startup time on
Linux](https://github.com/nushell/nushell/issues/6677#issuecomment-1364618122).
### Benchmarks
I ran some benchmarks on my desktop (Linux, 12900K) and the results are
very pleasing.
Nu's time to start up and run a command (`cargo build --release;
hyperfine 'target/release/nu -c "echo \"Hello, world!\""' --shell=none
--warmup 10`) goes from **8.8ms to 3.2ms, about 2.8x faster**.
Tests are also much faster! Running `cargo nextest` (with our very slow
`proptest` tests disabled) goes from **7.2s to 4.4s (1.6x faster)**,
because most tests involve launching a new instance of Nu.
### Design (updated)
I've added a new `LazyRecord` trait and added a `Value` variant wrapping
those trait objects, much like `CustomValue`. `LazyRecord`
implementations must implement these 2 functions:
```rust
// All column names
fn column_names(&self) -> Vec<&'static str>;
// Get 1 specific column value
fn get_column_value(&self, column: &str) -> Result<Value, ShellError>;
```
### Serializability
`Value` variants must implement `Serializable` and `Deserializable`, which poses some problems because I want to use unserializable things like `EngineState` in `LazyRecord`s. To work around this, I basically lie to the type system:
1. Add `#[typetag::serde(tag = "type")]` to `LazyRecord` to make it serializable
2. Any unserializable fields in `LazyRecord` implementations get marked with `#[serde(skip)]`
3. At the point where a `LazyRecord` normally would get serialized and sent to a plugin, I instead collect it into a regular `Value::Record` (which can be serialized)
Previously the group check was only for the current users gid, now we
check against all the users groups.
# Description
Currently when using the `cd` command to enter a directory there was
only a check against the current user id, and exact current group id,
meaning if a directory had a group permission and that group wasn't the
users group it was effectively ignored.
The fix simply implements a check through all the users current groups.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Nothing changed, just fix some typos
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
This PR updates the `sqlparser` dependency and updates code to the
latest api changes.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR updates the semver dependency and updates the `inc` plugin to
use the latest api.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #7590
# User-Facing Changes
So the following command
```
1..100 | each { |i| sleep 400ms; $i} | save --raw -f output.txt
```
Will stream data to `output.txt`
But I'm note sure how to make a proper test for it, so I leave with no
new test cases..
Also rename from `string_binary_list_value_to_bytes ` to
`value_to_bytes` to accepts more Value type.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Refactor command: "to url" in: "to url query". Changed usage sentence.
Closes: #7495
# User-Facing Changes
Now we get a query string from a record or table by using command: "to
url query".
```
> help to url query
Convert record or table into query string applying percent-encoding.
Usage:
> to url query
Flags:
-h, --help - Display the help message for this command
Signatures:
<record> | to url query -> <string>
<table> | to url query -> <string>
Examples:
Outputs a query string representing the contents of this record
> { mode:normal userid:31415 } | to url query
Outputs a query string representing the contents of this 1-row table
> [[foo bar]; ["1" "2"]] | to url query
Outputs a query string representing the contents of this record
> {a:"AT&T", b: "AT T"} | to url query
```
# Tests + Formatting
Added this test:
```
Example {
description: "Outputs a query string representing the contents of this record",
example: r#"{a:"AT&T", b: "AT T"} | to url query"#,
result: Some(Value::test_string("a=AT%26T&b=AT+T")),
},
```
to ensure percent-encoding.
# After Submitting
If PR is accepted I'll open another PR on documentation to notify
changes on
[this.](https://github.com/nushell/nushell.github.io/blob/main/book/commands/to_url.md)
# Description
This PR makes changes that allow underscores in numbers.
Example:
```nu
# allows underscores to be placed arbitrarily to enhance readability.
let pi = 3.1415_9265_3589_793
# works with integers
let num = 1_000_000_000_000
let fav_color = 0x68_9d_6a
```
I have changed `assert!(a == b)` calls to `assert_eq!(a, b)`, which give
better error messages. Similarly for `assert!(a != b)` and
`assert_ne!(a, b)`. Basically all instances were comparing primitives
(string slices or integers), so there is no loss of generality from
special-case macros,
I have also fixed a number of typos in comments, variable names, and a
few user-facing messages.
# Description
This PR allows the configuration of cursor shapes in nushell for each
edit mode. This is the change that is in the default_config.nu file.
```
cursor_shape: {
emacs: line # block, underscore, line (line is the default)
vi_insert: block # block, underscore, line (block is the default)
vi_normal: underscore # block, underscore, line (underscore is the default)
}
```
# User-Facing Changes
See above. If you'd prefer a different default, please speak up and let
us know.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Closes#6337 and #5366. Prior to this PR, when "shelling out" to cmd.exe
on Windows we were not trimming quotes correctly:
```bash
〉^echo "foo"
\"foo\"
```
After this change, we do:
```bash
〉^echo "foo"
foo
```
### Breaking Change
I ended up removing `dir` from the list of supported cmd.exe internal
commands as part of this PR.
For this PR, I extracted the argument-cleaning-and-expanding code from
`spawn_simple_command()` for reuse in `spawn_cmd_command()`. This means
that we now expand globs, which broke some tests for the `dir` cmd.exe
internal command.
I probably could have kept the tests working, but... tbh, I don't think
it's worth it. I don't want to make the `cmd.exe` functionality any more
complicated than it already is, and calling `dir` from Nu is always
going to be weird+hacky compared to `ls`.
# Description
As title
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR updates the base64 crate, which has changed significantly, so
all the base64 implementations had to be changed too. Tests pass. I hope
that's enough.
# User-Facing Changes
None, except added a new character encoding imap-mutf7 as mutf7.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
In bash when a program crashes, it prints the reason for what happened:
```
$ ./division_by_zero
Floating point exception (core dumped)
$ ./segfault
Segmentation fault (core dumped)
```
Nushell always prints the same thing in this case:
```
> ./division_by_zero
nushell: oops, process './division_by_zero' core dumped
Error: nu:🐚:external_command (link)
# etc..
```
This PR adds more detailed error printing, like in bash:
```
> ./division_by_zero
Floating point exception: oops, process './division_by_zero' core dumped
Error: nu:🐚:external_command (link)
# etc..
```
I made this message format as an example:
```
Floating point exception: oops, process './division_by_zero' core dumped
```
Instead of `nushell:` it writes a meaningful message, but I can change
this format as per the suggestions.
I tested the change only on linux, but it should work on other unix
systems.
# User-Facing Changes
The error message only.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Closes#7514.
* For both `encode` and `decode`: add a special case allowing `utf16` as
a valid alias for `utf-16` (just as `utf-8` has `utf8`).
* For `encode` , make it an error when encodings_rs replaces characters
outside the given encoding with HTML entities
* For `encode` , add `-i`/`--ignore-errors` flag to bring back this
behaviour.
Note: `--ignore-errors` does NOT ignore the error for using a wrong
encoding label like `uft8`
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Refers to: [5093](https://github.com/nushell/nushell/issues/5093)
# Tests
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# Description
Closes: #7696
# User-Facing Changes
Before:
```
❯ 'temp/aa' | path exists
Error: nu:🐚:io_error (link)
× I/O error
help: Os { code: 13, kind: PermissionDenied, message: "Permission denied" }
```
After:
```
❯ 'temp/aa' | path exists
Error: nu:🐚:io_error (link)
× I/O error
╭─[entry #42:1:1]
1 │ 'temp/aa' | path exists
· ────┬────
· ╰── Permission denied (os error 13)
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title
Fixes: #7673Fixes: #4205
Also possiblely fixes: https://github.com/nushell/nushell/issues/6993
# User-Facing Changes
Before:
```
> ^echo "~"
/Users/ttt
```
After:
```
> ^echo "~"
~
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix generated doc for `explore` commands, and resolve the static site
build error:
https://github.com/nushell/nushell.github.io/actions/runs/3889029668/jobs/6636921318
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
I implemented the status bar we talk about yesterday. The idea was
inspired by the progress bar of `wget`.
I decided to go for the second suggestion by `@Reilly`
> 2. add an Option<usize> or whatever to RawStream (and ListStream?) for
situations where you do know the length ahead of time
For now only works with the command `save` but after the approve of this
PR we can see how we can implement it on commands like `cp` and `mv`
When using `fetch` nushell will check if there is any `content-length`
attribute in the request header. If so, then `fetch` will send it
through the new `Option` variable in the `RawStream` to the `save`.
If we know the total size we show the progress bar
but if we don't then we just show the stats like: data already saved,
bytes per second, and time lapse.
Please let me know If I need to make any changes and I will be happy to
do it.
# User-Facing Changes
A new flag (`--progress` `-p`) was added to the `save` command
Examples:
```nu
fetch https://github.com/torvalds/linux/archive/refs/heads/master.zip | save --progress -f main.zip
fetch https://releases.ubuntu.com/22.04.1/ubuntu-22.04.1-desktop-amd64.iso | save --progress -f main.zip
open main.zip --raw | save --progress main.copy
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
-
I am getting some errors and its weird because the errors are showing up
in files i haven't touch. Is this normal?
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
A small but easy optimization for `evaluate_repl()`: clone
`engine_state` 1x instead of 3x.
This reduces time spent in a simple REPL eval (`enter` key pressed with
no command text) by about 10%, as measured in
[Superluminal](https://superluminal.eu/).
# Description
See title.
# User-Facing Changes
See title.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7706
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Currently the implementation is different for Windows and Unix.
Thus certain operations will fail if the platform foreign line ending is
used:
example failing under windows
```
git show (git merge-base main HEAD)
```
Temporary cheat is to strip all `\r` and `\n` from the end. Proper
solution should trim them as correct patterns.
Also needed: test of behavior with both platform newline and
platform-foreign line endings
cc @WindSoilder
# User-Facing Changes
Line endings should be trimmed no matter the source and no matter the
platform
# Tests + Formatting
Still missing
I have been recently going through some info logging in the cli and
noticed that there is too much info being printed to get a handle on
whats going on...
This is an attempt to do some minor logging clean up to print out "less
stuff",
in info logging mode mainly having to do with the prompt...
If someone really want to see what is going on they can very easily add
it
back in without too much trouble.
src/main.rs has a dependency on BufferedReader
which is currently located in nu_command.
I am moving BufferedReader to a more relevant
location (crate) which will allow / eliminate main's dependency
on nu_command in a benchmark / testing environment...
now that @rgwood has landed benches I want
to start experimenting with benchmarks related
to the parser.
For benchmark purposes when dealing with parsing
you need a very simple set of commands that show
how well the parser is doing, in other words
just the core commands... Not all of nu_command...
Having a smaller nu binary when running the benchmark CI
would enable building nushell quickly, yet still show us
how well the parser is performing...
Once this PR lands the only dependency main will have
on nu_command is create_default_context ---
meaning for benchmark purposes we can swap in a tiny
crate of commands instead of the gigantic nu_command
which has its "own" create_default_context...
It will also enable other crates going forward to
use BufferedReader. Right now it is not accessible
to other lower level crates because it is located in a
"top of the stack crate".
# Description
This PR aligns durations to the right side versus the left.
Before this PR
After this PR
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR sets up [Criterion](https://github.com/bheisler/criterion.rs)
for benchmarking in the main `nu` crate, and adds some simple parser
benchmarks.
To run the benchmarks, just do `cargo bench` or `cargo bench -- <regex
matching benchmark names>` in the repo root:
```bash
〉cargo bench -- parse
...
Running benches/parser_benchmark.rs (target/release/deps/parser_benchmark-75d224bac82d5b0b)
parse_default_env_file time: [221.17 µs 222.34 µs 223.61 µs]
Found 8 outliers among 100 measurements (8.00%)
5 (5.00%) high mild
3 (3.00%) high severe
parse_default_config_file
time: [1.4935 ms 1.4993 ms 1.5059 ms]
Found 11 outliers among 100 measurements (11.00%)
7 (7.00%) high mild
4 (4.00%) high severe
```
Existing benchmarks from `nu-plugin` have been moved into the main `nu`
crate to keep all our benchmarks in one place.
2 crates were still using Rust 2018, including the base `nu` crate. This
PR upgrades them to Rust 2021. If you're aware of any reason why this is
a bad idea, please speak now or forever hold your peace.
## Context
I was moving benchmarks from `nu-plugin` to the base crate and couldn't
figure out why they wouldn't compile. Turns out the benchmarks rely on
some Rust 2021 features. Would be nice to have everything on 2021.
# Description
This commit makes the `user` parameter optional in the `fetch` command.
Previously when attempting to _only_ pass a `password`, the command
would ignore authentication. Now when a `user` is not supplied, but a
`password` is, an empty user is implied.
Before this PR, consider the following:
```nushell
fetch -password "mypassword" $url
```
This would result in the `password` parameter being ignored entirely.
Now, with changes made in this PR, consider the same code snippet as
above. The following HTTP header will be used:
```
Authentication: Basic <base64_encode(":{password}")>
```
Note that the `user` field is implied as empty if one is not supplied
when `password` is.
# User-Facing Changes
* `fetch` now supports `password`-only authentication, using an empty
`user` if one is not supplied.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Add recursion limit to `def` and `block`.
Summary of this PR , it will detect if `def` call itself or not .
Then execute by using `stack` which I think best choice to use with this
design and core as it is available in all crates and mutable and
calculate the recursion limit on calling `def`.
Set 50 as recursion limit on `Config`.
Add some tests too .
Fixes#5899
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
Reasoning:
Most missing math commands are implemented with #7258.
The `meval` crate itself declares that it doesn't strive to stringent
standards (https://docs.rs/meval/latest/meval/#related-projects).
For example no particular special casing or transformations are
performed to ensure numerical stability. It uses the same rust `std`
library functions we use or have access to (and `f64`).
While the command call syntax in nushell may be a bit more verbose,
having a single source of truth and common commands is beneficial.
Furthermore the `math` commands can themselves implement broadcasting
over lists (or table columns).
Closes#7073
Removed dependencies:
- `meval`
- `nom 1.2.4` (duplicate)
User-Facing Changes:
Scripts using `math eval` will break.
We remove a further `eval` like behavior to get results through runtime evaluation (albeit limited in scope)
Tests:
- Updated tests that internally used `math eval`.
- Removed one test that primarily used `math eval` to obtain a result from `str join`
# Description
Refactored the quadratic complexity on `uniq` to use a HashMap, as key I
converted the Value to string.
I tried to use the HashableValue, but it looks it is not very developed
yet and it was getting more complex and difficult.
This improves performance on large data sets.
Fixes https://github.com/nushell/nushell/issues/7477
# Tests + Formatting
```
> let data = fetch "https://home.treasury.gov/system/files/276/yield-curve-rates-1990-2021.csv"
> $data | uniq
```
it keeps original attribute order in Records:
```
> [ {b:2, a:1} {a:1, b:2} ] | uniq
╭───┬───┬───╮
│ # │ b │ a │
├───┼───┼───┤
│ 0 │ 2 │ 1 │
╰───┴───┴───╯
```
# Description
Closes#7554
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Reilly Wood <26268125+rgwood@users.noreply.github.com>
Closes#7581.
After this PR, `describe` shows `(stream)` next to input that arrived at
`describe` as a `ListStream`:
```bash
〉ls | describe
table<name: string, type: string, size: filesize, modified: date> (stream)
〉[1 2 3] | each {|i| $i} | describe
list<int> (stream)
```
`describe` must collect all items of the stream to display type
information for lists and tables. If users need to avoid collecting
input, they can use the `-n`/`--no-collect` flag:
```bash
〉[1 2 3] | each {|i| $i} | describe --no-collect
stream
```
I noticed that the help for the `url` command was confusing (it wasn't
clear that `url` is just a base command that does nothing itself) and
the input type was also wrong. Fixed.
Before:
```bash
〉help url
Apply url function.
Search terms: network, parse
Usage:
> url
Subcommands:
url parse - Parses a url
Flags:
-h, --help - Display the help message for this command
Signatures:
<string> | url -> <string>
```
After:
```bash
〉help url
Various commands for working with URLs
You must use one of the following subcommands. Using this command as-is will only produce this help message.
Search terms: network, parse
Usage:
> url
Subcommands:
url parse - Parses a url
Flags:
-h, --help - Display the help message for this command
Signatures:
<nothing> | url -> <string>
```
# Description
Fixes#7546 's request. I'm unsure, so hopefully someone in charge of
design can chip in.
# User-Facing Changes
`open` now opens directories in the default file manager.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
#7623 causes a break on PATH convertion, this pr is going to revert
`prepend` and `append` bahavior.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This closes#7498, as well as fixes an issue reported in
https://github.com/nushell/nushell/pull/7002#issuecomment-1368340773
BEFORE:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #5:1:1]
1 │ [{foo: 'bar'} {}] | get foo
· ────────┬──────── ─┬─
· │ ╰── value originates here
· ╰── cannot find column 'Empty cell'
╰────
〉[{foo: 'bar'} {}].foo
╭───┬─────╮
│ 0 │ bar │
│ 1 │ │
╰───┴─────╯
```
AFTER:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #1:1:1]
1 │ [{foo: 'bar'} {}] | get foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
〉[{foo: 'bar'} {}].foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #3:1:1]
1 │ [{foo: 'bar'} {}].foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
```
EDIT: This also changes the semantics of `get`/`select` `-i` somewhat.
I've decided to leave it like this because it works more intuitively
with `default` and `compact`.
BEFORE:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
null
```
AFTER:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
[[foo]; [null], [null], [null]]
```
# User-Facing Changes
See above. EDIT: the issue with holes in cases like ` [{foo: 'bar'}
{}].foo.0` versus ` [{foo: 'bar'} {}].0.foo` has been resolved.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
A tiny follow-up from https://github.com/nushell/nushell/pull/7623,
changes "Only supports for specific input types" to "Input type not
supported"
Before:
```
〉"asdf" | append "foo"
Error: nu:🐚:only_supports_this_input_type (link)
× Only supports for specific input types.
╭─[entry #2:1:1]
1 │ "asdf" | append "foo"
· ───┬── ───┬──
· │ ╰── only list, binary, raw data or range input data is supported
· ╰── input type: string
╰────
```
After:
```
〉"asdf" | append "foo"
Error: nu:🐚:only_supports_this_input_type (link)
× Input type not supported.
╭─[entry #2:1:1]
1 │ "asdf" | append "foo"
· ───┬── ───┬──
· │ ╰── only list, binary, raw data or range input data is supported
· ╰── input type: string
╰────
```
# Description
Closes#7273.
Also slightly edits/tidies up parser.rs.
# User-Facing Changes
`^` is now forbidden in `def` and `def-env` command names. EDIT: also
`alias`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds the `mime-type` to the `type` column if you add the
`--mime-type(-m)` flag to `ls`.
<img width="853" alt="Screenshot 2022-12-27 at 11 43 20 AM"
src="https://user-images.githubusercontent.com/343840/209705499-27fe40fe-0356-4d9d-97f2-4b2dc52e0963.png">
<img width="781" alt="Screenshot 2022-12-27 at 11 45 53 AM"
src="https://user-images.githubusercontent.com/343840/209705509-4d677389-fd68-401e-a7af-3fc6052743b6.png">
# User-Facing Changes
If you specify the `-m` flag, you get the "guessed at" mime type. The
guess is based on the file name and uses this crate
https://docs.rs/mime_guess/latest/mime_guess/ for the guessing.
Part of issue #7612 and and #7524
There's some debate on if the `mime-type` should be added to the `type`
column or if there should be a separate `mime` column. I tend to lean on
the side of `type` since it's technically a type and it's only in that
column if you ask it to be there. Also, I'd prefer to reuse a column
rather than having a list of sprawling columns. Also, as @KodiCraft
suggested, there is precedence as with `ls -d` where the summed size is
in the size column.
I could go either way and if someone wants to create a `mime` column,
we'd probably accept it.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fix and Allow Number and Boolean type to be key in Yaml .
For example :
`"200 : " | from yaml` not allowed because of Number key type.
PR allow , we can use Boolean and Number for key.
For example :
`"true : false" | from yaml`
`"5050 : it is number" | from yaml`
Fixes#7222 .
ref #7598
To be honest I was not able to obtain such results in basic mode as you
@rgwood.
But I've got it in `table -e`.
So this must fix the `table -e` wrapping.
Could you verify if it got fixed?
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Fix const examples
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# Description
Fix an example of `env` command
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
close#7591
I tend to think it must be addressed.
But I'd verify it @rgwood.
PS: I've noticed how `table -e` and `table` with the same width wraps a
bit differently sometimes. (I guess it also must be addressed......)
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Inspired by #7592
For brevity use `Value::test_{string,int,float,bool}`
Includes fixes to commands that were abusing `Span::test_data` in their
implementation. Now the call span is used where possible or the explicit
`Span::unknonw` is used.
## Command fixes
- Fix abuse of `Span::test_data()` in `query_xml`
- Fix abuse of `Span::test_data()` in `term size`
- Fix abuse of `Span::test_data()` in `seq date`
- Fix two abuses of `Span::test_data` in `nu-cli`
- Change `Span::test_data` to `Span::unknown` in `keybindings listen`
- Add proper call span to `registry query`
- Fix span use in `nu_plugin_query`
- Fix span assignment in `select`
- Use `Span::unknown` instead of `test_data` in more places
## Other
- Use `Value::test_int`/`test_float()` consistently
- More `test_string` and `test_bool`
- Fix unused imports
# User-Facing Changes
Some commands may now provide more helpful spans for downstream use in
errors
# Description
The message reads "You must use one of the following subcommands. Using
this command as-is will only produce this help message." and is added to
commands like `into`, `bytes`, `str`, etc.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is for consistency with the new `values` command. Previously it
would return a completely empty record (??!) when given an
incorrectly-typed value.
# User-Facing Changes
See title.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Closes#7572 by adding a cache for compiled regexes of type
`Arc<Mutex<LruCache<String, Regex>>>` to `EngineState` .
The cache is limited to 100 entries (limit chosen arbitrarily) and
evicts least-recently-used items first.
This PR makes a noticeable difference when using regexes for
`color_config`, e.g.:
```bash
#first set string formatting in config.nu like:
string: { if $in =~ '^#\w{6}$' { $in } else { 'white' } }`
# then try displaying and exploring a table with many strings
# this is instant after the PR, but takes hundreds of milliseconds before
['#ff0033', '#0025ee', '#0087aa', 'string', '#4101ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff', '#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff','#ff0033', '#0025ee', '#0087aa', 'string', '#6103ff']
```
## New dependency (`lru`)
This uses [the popular `lru` crate](https://lib.rs/crates/lru). The new
dependency adds 19.8KB to a Linux release build of Nushell. I think this
is OK, especially since the crate can be useful elsewhere in Nu.
# Description
This PR allows `wrap` to pass through metadata.
# User-Facing Changes
This change allows this:
<img width="789" alt="Screenshot 2022-12-23 at 3 12 37 PM"
src="https://user-images.githubusercontent.com/343840/209406010-1da9b814-1892-4961-bb01-9f88ddc83474.png">
Instead of this:
<img width="786" alt="Screenshot 2022-12-23 at 3 12 48 PM"
src="https://user-images.githubusercontent.com/343840/209406021-6e5eb860-0911-42c4-a39e-5fe76c61af03.png">
Strangely enough, this command doesn't result in LS_COLORS `(ls |
values).0 | wrap name`
/cc @webbedspace - we were talking about LS_COLORS in `values` earlier.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Certain commands that operate on tables also work on bare records, but
their type sig didn't reflect that. This corrects this.
I did not fix certain commands which, I feel, currently give unintended
behaviour when given plain records. These are `sort-by` and `uniq-by`.
Also corrected the wording of some stuff in headers.rs, and removed a
wrong comment in insert.rs.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* I was dismayed to discover recently that UnsupportedInput and
TypeMismatch are used *extremely* inconsistently across the codebase.
UnsupportedInput is sometimes used for input type-checks (as per the
name!!), but *also* used for argument type-checks. TypeMismatch is also
used for both.
I thus devised the following standard: input type-checking *only* uses
UnsupportedInput, and argument type-checking *only* uses TypeMismatch.
Moreover, to differentiate them, UnsupportedInput now has *two* error
arrows (spans), one pointing at the command and the other at the input
origin, while TypeMismatch only has the one (because the command should
always be nearby)
* In order to apply that standard, a very large number of
UnsupportedInput uses were changed so that the input's span could be
retrieved and delivered to it.
* Additionally, I noticed many places where **errors are not propagated
correctly**: there are lots of `match` sites which take a Value::Error,
then throw it away and replace it with a new Value::Error with
less/misleading information (such as reporting the error as an
"incorrect type"). I believe that the earliest errors are the most
important, and should always be propagated where possible.
* Also, to standardise one broad subset of UnsupportedInput error
messages, who all used slightly different wordings of "expected
`<type>`, got `<type>`", I created OnlySupportsThisInputType as a
variant of it.
* Finally, a bunch of error sites that had "repeated spans" - i.e. where
an error expected two spans, but `call.head` was given for both - were
fixed to use different spans.
# Example
BEFORE
```
〉20b | str starts-with 'a'
Error: nu:🐚:unsupported_input (link)
× Unsupported input
╭─[entry #31:1:1]
1 │ 20b | str starts-with 'a'
· ┬
· ╰── Input's type is filesize. This command only works with strings.
╰────
〉'a' | math cos
Error: nu:🐚:unsupported_input (link)
× Unsupported input
╭─[entry #33:1:1]
1 │ 'a' | math cos
· ─┬─
· ╰── Only numerical values are supported, input type: String
╰────
〉0x[12] | encode utf8
Error: nu:🐚:unsupported_input (link)
× Unsupported input
╭─[entry #38:1:1]
1 │ 0x[12] | encode utf8
· ───┬──
· ╰── non-string input
╰────
```
AFTER
```
〉20b | str starts-with 'a'
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #1:1:1]
1 │ 20b | str starts-with 'a'
· ┬ ───────┬───────
· │ ╰── only string input data is supported
· ╰── input type: filesize
╰────
〉'a' | math cos
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #2:1:1]
1 │ 'a' | math cos
· ─┬─ ────┬───
· │ ╰── only numeric input data is supported
· ╰── input type: string
╰────
〉0x[12] | encode utf8
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #3:1:1]
1 │ 0x[12] | encode utf8
· ───┬── ───┬──
· │ ╰── only string input data is supported
· ╰── input type: binary
╰────
```
# User-Facing Changes
Various error messages suddenly make more sense (i.e. have two arrows
instead of one).
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR changes `to text` so that when given a `ListStream`, it streams
the incoming values instead of collecting them all first.
The easiest way to observe/verify this PR is to convert a list to a very
slow `ListStream` with `each`:
```bash
ls | get name | each {|n| sleep 1sec; $n} | to text
```
The `to text` output will appear 1 item at a time.
# Description
Prevent a situation where a `def` can't be run due to a poor choice of
name. Related: #6335. Hashtags, numbers and filesizes are no longer
allowed. `alias` check has been moved because previously `alias 123`
would be caught but `alias "123"` would be permitted.
# User-Facing Changes
Some definitions can no longer be made, but because they couldn't be run
previously anyway, it doesn't really matter.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Purely for consistency, various remaining instances of `$nothing`
(almost all of which were in test code) have been changed to `null`.
Now, the only place that refers to `$nothing` is the parser code which
implements it.
# User-Facing Changes
The default config.nu now uses `null` in certain places where it used
`$nothing`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This now works:
```
try { 'x' | math abs } catch { $in }
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7529.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Currently, `filesize_format`/`filesize_metric` conflicts are resolved as
follows: if the `filesize_format` ends in "ib", then that overrides
`filesize_metric`, otherwise, `filesize_metric` overrides
`filesize_format`. This removes this difficult-to-predict asymmetric
behaviour, and makes it so that `filesize_metric` always overrides
`filesize_format`.
This also adds tests for `$env.config.filesize.format` and
`$env.config.filesize.metric` values.
REMINDER: `filesize_metric` means "increments of 1000", and refers to
KB-MB-GB-TB etc.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Fixes#5996
Just found a relative easy way to fix the issue
# User-Facing Changes
```
❯ open $nu.plugin-path | from nuon
Error:
× error when loading nuon text
╭─[entry #36:1:1]
1 │ open $nu.plugin-path | from nuon
· ────┬────
· ╰── could not load nuon text
╰────
Error:
× Error when loading
❯ open $nu.config-path | from nuon
Error:
× error when loading nuon text
╭─[entry #37:1:1]
1 │ open $nu.config-path | from nuon
· ────┬────
· ╰── could not load nuon text
╰────
Error:
× error when loading
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
`proptest` caught a failing test condition for `&&` as a literal string. It requires a quotation to be parsed correctly by current `from nuon`
https://github.com/nushell/nushell/actions/runs/3753242377/jobs/6376308675
The change in the parser that now returns an error was introduced by https://github.com/nushell/nushell/pull/7241
This in theory doesn't have to be an error (it is a diagnostic for nushell code) but it is probably better safe than sorry to require quotation here.
- Add a test for `&&` in `to nuon` from proptest fail
- Fix `to nuon` generating invalid `&&` literal
- Add a test for `,` in `to nuon`/`from nuon` cycle
- Bonus: should already be properly quoted
`table` handles slow `ListStream`s in a special way: every 100 items, it
checks whether 1 second has elapsed since the last table page, and if so
it outputs a new page with all the items in its buffer.
**I would like to remove the "every 100 items" condition and always
output whatever we have if a second has elapsed.** I think this will be
a better user experience for very slow streams.
As a motivating example, imagine tailing a log file and doing some
string parsing/projection on each line. The user will be really annoyed
if they have to wait for 100 lines to be written to the log before
seeing new results!
I did some quick performance measurements with Criterion, and the
elapsed-time check takes about 16ns on my machine (Linux, 12900k). I
think the performance impact of checking that for every item will be
negligible.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
General tree shaking through `cargo +nightly udeps` and moving mentions
of `nu-test-support` to the dev deps.
Also since #7488 no separate import of `nu-path` necessary
cc @webbedspace
# Description
This turns off `cd` abbreviations by default
# User-Facing Changes
`cd` goes back to requiring a name with the default configuration
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
ref #7339 - This PR updates explore to take some of the colors from
nushell, namely the line colors and the ls_colors.
note: Not sure why this regression appeared maybe it's a feature or it's
no longer supposed to be supported?
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
> I'm not sure how i feel about that. I mean if there are a lot of
columns, it should probably have a max width so 1 column doesn't take
the entire width of your screen. Ideally it would work closely like
table worked before we migrated to tabled, as far as how column widths
were allocated.
I believe it still not completely matched.
*To be honest I am not against the #7446 approach.
The PR makes a switch between logics on a premise of `termwidth`.
So if `termwidth > 120` we start prioritizing amount of columns we can
show (We try to show as many columns as we can).
Otherwise we do what I've described in #7446 (We show the least columns
but with least truncation involvement).
In case it's OK,
I guess we could make the value configurable.
cc @fdncred
ref #7446
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
A few small tweaks to the new `explore` command:
1. Rewrote the help text a bit.
1. I think it's important to mention `:try` up front.
2. Removed the info about `:help foo` because it's currently supported
by very few subcommands
2. Make `exit_esc` default to true. I want to avoid people getting stuck
in `explore` like they get stuck in Vim
3. ~~Always show the help message ("For help type :help") on startup~~
1. The message is small+unobtrusive and I don't this is worth a
configuration item
4. Exit the information view when Escape is pressed
5. General typo+grammar cleanup
cc: @zhiburt @fdncred
# Description
See title.
# User-Facing Changes
See title.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
A follow-up to #7497. That change made it so that `get foo` would
eliminate non-record rows; I think that was an unintentional and
undesirable side-effect.
Before #7497:
```bash
〉[$nothing, { item: "foo" }] | get item
╭───┬─────╮
│ 0 │ │
│ 1 │ foo │
╰───┴─────╯
```
After #7497:
```bash
〉[$nothing, {item: "foo"}] | get item
╭───┬─────╮
│ 0 │ foo │
╰───┴─────╯
```
After this PR:
```bash
〉[$nothing, { item: "foo" }] | get item
╭───┬─────╮
│ 0 │ │
│ 1 │ foo │
╰───┴─────╯
```
cc: @merelymyself
# Description
Follow up to #7141 to map @webbedspace's rgb colors to xterm 256 color
indexes. Also added the xterm 256 named colors to `ansi --list` in the
process.
The few dozen or so names that were duplicate in the xterm 256 names
from [here](https://www.ditig.com/256-colors-cheat-sheet) were renamed
by appending a,b,c,d. So, instead of two blue3's there will be blue3a
and blue3b.
# User-Facing Changes
More colors.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#6909. You can now add closures to your `color_config` themes.
Whenever a value would be printed with `table`, the closure is run with
the value piped-in. The closure must return either a {fg,bg,attr} record
or a color name (`'light_red'` etc.). This returned style is used to
colour the value.
This is entirely backwards-compatible with existing config.nu files.
Example code excerpt:
```
let my_theme = {
header: green_bold
bool: { if $in { 'light_cyan' } else { 'light_red' } }
int: purple_bold
filesize: { |e| if $e == 0b { 'gray' } else if $e < 1mb { 'purple_bold' } else { 'cyan_bold' } }
duration: purple_bold
date: { (date now) - $in | if $in > 1wk { 'cyan_bold' } else if $in > 1day { 'green_bold' } else { 'yellow_bold' } }
range: yellow_bold
string: { if $in =~ '^#\w{6}$' { $in } else { 'white' } }
nothing: white
```
Example output with this in effect:
Slightly important notes:
* Some color_config names, namely "separator", "empty" and "hints", pipe
in `null` instead of a value.
* Currently, doing anything non-trivial inside a closure has an
understandably big perf hit. I currently do not actually recommend
something like `string: { if $in =~ '^#\w{6}$' { $in } else { 'white' }
}` for serious work, mainly because of the abundance of string-type data
in the world. Nevertheless, lesser-used types like "date" and "duration"
work well with this.
* I had to do some reorganisation in order to make it possible to call
`eval_block()` that late in table rendering. I invented a new struct
called "StyleComputer" which holds the engine_state and stack of the
initial `table` command (implicit or explicit).
* StyleComputer has a `compute()` method which takes a color_config name
and a nu value, and always returns the correct Style, so you don't have
to worry about A) the color_config value was set at all, B) whether it
was set to a closure or not, or C) which default style to use in those
cases.
* Currently, errors encountered during execution of the closures are
thrown in the garbage. Any other ideas are welcome. (Nonetheless, errors
result in a huge perf hit when they are encountered. I think what should
be done is to assume something terrible happened to the user's config
and invalidate the StyleComputer for that `table` run, thus causing
subsequent output to just be Style::default().)
* More thorough tests are forthcoming - ran into some difficulty using
`nu!` to take an alternative config, and for some reason `let-env config
=` statements don't seem to work inside `nu!` pipelines(???)
* The default config.nu has not been updated to make use of this yet. Do
tell if you think I should incorporate that into this.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
`echo` tends to confuse new Nu users; they expect it to work like
`print` when it just passes a value to the next stage of the pipeline.
We haven't quite figured out what to do about `echo` in the long run,
but I think a good start is to remove `echo` from command examples where
it would be unnecessary and arguably unidiomatic.
# Description
Fixes#7494.
```
/home/gabriel/CodingProjects/nushell〉[[{foo: bar}]] | get foo 12/16/2022 12:31:17 PM
Error: nu::parser::not_found (link)
× Not found.
╭─[entry #1:1:1]
1 │ [[{foo: bar}]] | get foo
· ───────┬──────
· ╰── did not find anything under this name
╰────
```
# User-Facing Changes
cell paths no longer drill into nested tables.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The `Signature` data structure has changed. We need to add the required
fields for the nu plugin in python to work well when registering it.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
## Fix `nu-path` usage in `nu!` testing macro
The `nu-path` crate needs to be properly re-exported so the generated
code is valid if `nu-path` is not present among the dependencies of the
using crate.
Usage of crates in `macro_rules!` macros has to follow the
`$crate::symbol_in_crate` path pattern (With an absolute path-spec also
for macros defined in submodules)
## Move `nu-test-support` to devdeps in `nu-protocol`
Also remove the now unnecessary direct dependency on `nu-path`.
`nu!` macro had to be changed to make it a proper transitive dependency.
I've been working on streaming and pipeline interruption lately. It was
bothering me that checking ctrl+c (something we want to do often) always
requires a bunch of boilerplate like:
```rust
use std::sync::atomic::Ordering;
if let Some(ctrlc) = &engine_state.ctrlc {
if ctrlc.load(Ordering::SeqCst) {
...
```
I added a helper method to cut that down to:
```rust
if nu_utils::ctrl_c::was_pressed(&engine_state.ctrlc) {
...
```
# Description
Demonstrates that you can use `do` to execute stored closures and
evaluate their captures properly.
# Tests + Formatting
As an example test increases coverage of the usage to execute first
class closures.
Additional tests using that found in
`tests/shell/pipeline/commands/internal.rs`
A partial fix for #7477. `uniq` can be slow sometimes, so we should
check `ctrl-c` when it's running.
Tested on [this
file](https://home.treasury.gov/system/files/276/yield-curve-rates-1990-2021.csv),
I ran `open yield-curve-rates-1990-2021.csv | uniq` and confirmed that I
can now cancel the operation.
Future work is needed to figure out why `uniq` is so slow.
# Description
Just spot that there are some duplicate code about checking external
runs to failed, is pr is trying to refactor it and reduce lines of code
# User-Facing Changes
NaN
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
We've added some shapes recently. This PR adds them to the
default_config and sorts them in order to make finding missing ones
easier.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7342. `0..1000 | table` before this change:
`0..1000 | table` after this change:
When piping data to `table`, pages were not getting a newline at the
end[^1]. This problem was uncovered and exacerbated by the new
`display_output` hook which implicitly piped _everything_ to `table`.
## The Fix
`PagingTableCreator` now adds a newline to each page instead of relying
on later code to do it.
## Tests
I spent a while trying to write a regression test for this behaviour but
I couldn't get the test to fail before my fix! I think the test
infrastructure does something special with newlines when it's checking
command output. I eventually ran out of steam trying to investigate
that, sorry.
[^1]: unless the pipe to table was the implicit one that's done when
there is no `display_output` hook set. That situation was still working
OK.
Change in `mkdir` `-s` flag to `-v` to be similar to other commands
# Description
Other commands like `rm`, `mv`, `cp` have a `-v` (`--verbose`) flag.
`mkdir` has a `-s` (`--show-created-paths`), but should be consistent
with other commands.
# User-Facing Changes
- flag `-s` replaced by `-v` in `mkdir` command.
# Tests + Formatting
```
> mkdir -v new_dir
╭───┬───────────────────────────────────╮
│ 0 │ C:\Users\ricardo.monteiro\new_dir │
╰───┴───────────────────────────────────╯
```
# Description
This PR adds missing items in `parse_shape_name`, sorts the
`SyntaxShape` enum and the `Type` enum. It's a pain to hunt around for
particular items in an enum when they're unsorted.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#6773.
```
/home/gabriel/CodingProjects/nushell〉ls -r 12/12/2022 02:57:35 PM
Error: nu::parser::unknown_flag (link)
× The `ls` command doesn't have flag `-r`.
╭─[entry #1:1:1]
1 │ ls -r
· ┬
· ╰── unknown flag
╰────
help: Available flags: --help(-h), --all(-a), --long(-l), --short-names(-s), --full-paths(-f), --du(-d), --directory(-D). Use `--help` for more information.
```
# User-Facing Changes
Different error for unknown flag.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
add input_output_types() to benchmark, cd and config reset commands
It's an update to https://github.com/nushell/nushell/issues/7320
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Reverts nushell/nushell#7448
Some surprising behavior in how we do this. For example:
```
〉if (true || false) { print "yes!" } else { print "no!" }
no!
〉if (true or false) { print "yes!" } else { print "no!" }
yes!
```
This means for folks who are using the old `||`, they possibly get the
wrong answer once they upgrade. I don't think we can ship with that as
it will catch too many people by surprise and just make it easier to
write buggy code.
Closes#7431. In a nutshell:
- `run_hook_block()` in repl.rs was collecting all input into a `Value`
instead of handling streaming input properly
- this was a problem because now we have a default `display_output` hook
that _everything_ gets piped to
- this PR fixes the problem by tweaking `run_hook_block()` to return a
`PipelineData` instead of a `Value`
After this change, individual pages are rendered as they finish. This is
a little easier to see if I tweak `STREAM_PAGE_SIZE` in table.rs to 10:
## Future work
This does _not_ fix https://github.com/nushell/nushell/issues/7342.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
We got some feedback from folks used to other shells that `try/catch`
isn't quite as convenient as things like `||`. This PR adds `&&` as a
synonym for `;` and `||` as equivalent to what `try/catch` would do.
# User-Facing Changes
Adds `&&` and `||` pipeline operators.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7216
Adds `interact-once` switch which numbers out the number of files to
delete and asks the user for confirmation.
```
/home/gabriel/test〉ls 12/11/2022 11:25:42 AM
╭───┬───────┬──────┬──────┬──────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼──────────┤
│ 0 │ a.txt │ file │ 0 B │ now │
│ 1 │ b.txt │ file │ 0 B │ now │
│ 2 │ c.txt │ file │ 0 B │ now │
╰───┴───────┴──────┴──────┴──────────╯
/home/gabriel/test〉rm *.txt -I 12/11/2022 11:25:42 AM
rm: remove 3 files? : y
/home/gabriel/test〉ls 12/11/2022 11:25:51 AM
/home/gabriel/test〉 12/11/2022 11:25:54 AM
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7404Fixes: #7402
## About change
In `eval_block`, all pipelines(or called statements?) result will be
printed except the last one, the last one is returned by `eval_block`
function.
So if we want to print the last statement in eval block, we just need to
print that value.
# User-Facing Changes
### for
```
❯ for _ in 1..2 { echo "a" }
a
a
```
### while
```
❯ mut x = 1; while $x < 3 { $x = $x + 1; echo bb; }
bb
bb
```
### loop
```
❯ mut total = 0; loop {
∙ if $total > 1 {
∙ break
∙ } else {
∙ $total += 1
∙ }
∙ echo 3
∙ }
3
3
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The message arrow is altered to show the external command name in case
it wasn't obvious. (See example for an occasion where it is
non-obvious).
BEFORE:
```
〉else if (2mb) > 4mb
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #35:1:1]
1 │ else if (2mb) > 4mb
· ─┬
· ╰── Cannot convert filesize to a string
╰────
help: All arguments to an external command need to be string-compatible
```
AFTER:
```
〉else if (2mb) > 4mb
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #3:1:1]
1 │ else if (2mb) > 4mb
· ─┬
· ╰── Cannot convert filesize to a string argument for 'else'
╰────
help: All arguments to an external command need to be string-compatible
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR changes some commands that previously accepted row conditions
(like `$it > 5`) as parameter to accept closures instead. The reasons
are:
a) The commands would need to move into parser keywords in the future
while they feel more like commands to be implemented in Nushell code as
a part of standard library.
b) In scripts, it is useful to store the predicate condition in a
variable which you can't do with row conditions.
c) These commands are not used that often to benefit enough from the
shorter row condition syntax
# User-Facing Changes
The following commands now accept **closure** instead of a **row
condition**:
- `take until`
- `take while`
- `skip until`
- `skip while`
- `any`
- `all`
This is a part of an effort to move away from shape-directed parsing.
Related PR: https://github.com/nushell/nushell/pull/7365
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Changes the `FILE_PWD` setting mechanism to match the one used in the
`use` command.
Fixes https://github.com/nushell/nushell/pull/7424
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When running `nu script.nu`, the `$env.FILE_PWD` will be set to the
directory where the script is.
Also makes the error message a bit nicer:
```
> target/debug/nu asdihga
Error: nu:🐚:file_not_found (link)
× File not found
╭─[source:1:1]
1 │ nu
· ▲
· ╰── Could not access file 'asdihga': "No such file or directory (os error 2)"
╰────
```
# User-Facing Changes
`FILE_PWD` environment variable is available when running a script as
`nu script.nu`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes https://github.com/nushell/nushell/issues/6708
The error message of environment variable not found could change
depending on the `$env` content which can produce random failures on
different systems. This PR hopefully makes the tests more resilient.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR moves the `where` command to a parser keyword. While it still
uses the shape-directed parsing dictated by the signature, we're free to
change the parsing code now to a custom one once we remove the syntax
shapes.
As a side effect, the `where -b` flag was removed and its functionality
has moved to the new `filter` command.
Just FYI, other commands that take row conditions:
- `take until`
- `take while`
- `skip until`
- `skip while`
- `any`
- `all`
We can either move these to the parser as well or make them accept a
closure instead of row condition.
# User-Facing Changes
New `filter` command which replaces `where -b` functionality.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7389
Make split row works more like python or rust, especially, when the
input string stars/ends with separator, append a empty string to result.
Here are examples:
python:
```python
In [6]: "\nasdf\nghi\n".split("\n")
Out[6]: ['', 'asdf', 'ghi', '']
```
rust:
```rust
fn main() {
let x = "\nabc\ndef\n";
let y = x.split("\n").collect::<Vec<&str>>();
println!("{:?}", y); // outputs: ["", "abc", "def", ""]
}
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7059. Rather than generate a new Record each time $env.config is
accessed (as described in that issue), instead `$env.config = ` now A)
parses the input record, then B) un-parses it into a clean Record with
only the valid values, and stores that as an env-var. The reasoning for
this is that I believe `config_to_nu_record()` (the method that performs
step B) will be useful in later PRs. (See below)
As a result, this also "fixes" the following "bug":
```
〉$env.config = 'butts'
$env.config is not a record
〉$env.config
butts
```
~~Instead, `$env.config = 'butts'` now turns `$env.config` into the
default (not the default config.nu, but `Config::default()`, which
notably has empty keybindings, color_config, menus and hooks vecs).~~
This doesn't attempt to fix#7110. cc @Kangaxx-0
# Example of new behaviour
OLD:
```
〉$env.config = ($env.config | merge { foo: 1 })
$env.config.foo is an unknown config setting
〉$env.config.foo
1
```
NEW:
```
〉$env.config = ($env.config | merge { foo: 1 })
Error:
× Config record contains invalid values or unknown settings
Error:
× Error while applying config changes
╭─[entry #1:1:1]
1 │ $env.config = ($env.config | merge { foo: 1 })
· ┬
· ╰── $env.config.foo is an unknown config setting
╰────
help: This value has been removed from your $env.config record.
〉$env.config.foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #1:1:1]
1 │ $env.config = ($env.config | merge { foo: 1 })
· ──┬──
· ╰── value originates here
╰────
╭─[entry #2:1:1]
1 │ $env.config.foo
· ─┬─
· ╰── cannot find column 'foo'
╰────
```
# Example of new errors
OLD:
```
$env.config.cd.baz is an unknown config setting
$env.config.foo is an unknown config setting
$env.config.bar is an unknown config setting
$env.config.table.qux is an unknown config setting
$env.config.history.qux is an unknown config setting
```
NEW:
```
Error:
× Config record contains invalid values or unknown settings
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:267:1]
267 │ abbreviations: true # allows `cd s/o/f` to expand to `cd some/other/folder`
268 │ baz: 3,
· ┬
· ╰── $env.config.cd.baz is an unknown config setting
269 │ }
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:269:1]
269 │ }
270 │ foo: 1,
· ┬
· ╰── $env.config.foo is an unknown config setting
271 │ bar: 2,
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:270:1]
270 │ foo: 1,
271 │ bar: 2,
· ┬
· ╰── $env.config.bar is an unknown config setting
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:279:1]
279 │ }
280 │ qux: 4,
· ┬
· ╰── $env.config.table.qux is an unknown config setting
281 │ }
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:285:1]
285 │ file_format: "plaintext" # "sqlite" or "plaintext"
286 │ qux: 2
· ┬
· ╰── $env.config.history.qux is an unknown config setting
287 │ }
╰────
help: This value has been removed from your $env.config record.
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Address part of feature request #7337, add a small command `into
cellpath` to allow string -> cellpath auto-conversion, with this change,
we could run
```
let p = 'ls.use_ls_colors'
$env.config | upsert ($p | nito cellpath) false
```
<img width="710" alt="image"
src="https://user-images.githubusercontent.com/85712372/206782818-3024b34f-150b-482d-aebc-9426ef6a1cf9.png">
Note - This pr only covers `String` -> `CellPath`, any other conversions
should be considered as expected?
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When `seq date` was changed to remove the `-s` param, the example was
missed. This PR removes that example.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While perusing Value.rs, I noticed the `Value::int()`, `Value::float()`,
`Value::boolean()` and `Value::string()` constructors, which seem
designed to make it easier to construct various Values, but which aren't
used often at all in the codebase. So, using a few find-replaces
regexes, I increased their usage. This reduces overall LOC because
structures like this:
```
Value::Int {
val: a,
span: head
}
```
are changed into
```
Value::int(a, head)
```
and are respected as such by the project's formatter.
There are little readability concerns because the second argument to all
of these is `span`, and it's almost always extremely obvious which is
the span at every callsite.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7407.
```
/home/gabriel/CodingProjects/nushell〉if false { 'a' } else { $foo } 12/09/2022 08:14:48 PM
Error: nu::parser::variable_not_found (link)
× Variable not found.
╭─[entry #1:1:1]
1 │ if false { 'a' } else { $foo }
· ──┬─
· ╰── variable not found
╰────
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Adds new command `math log` that takes as a required positional argument
a base.
Specialized for `math log 2` and `math log 10` for better performance
and precision that matches the expectations there. This leads to
discontinuities in numerical error but should make a better trade-off
for common usecases.
Example testing of the happy path
# Description
Fixes#5424. Checking the code, apparently this was always supposed to
work; however, because it compared the `Suggestion`s directly, and
internal commands had descriptions while external commands did not, it
never did function properly.
# User-Facing Changes
Completing to external commands (with overlap) adds a caret so the
external command is actually run.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The "tab" key now cycles completions in all editor modes, not just
emacs.
# User-Facing Changes
Updated default config
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds improved errors for when a user uses a bashism that nu doesn't
support.
fixes#7237
Examples:
```
Error: nu::parser::shell_andand (link)
× The '&&' operator is not supported in Nushell
╭─[entry #1:1:1]
1 │ ls && ls
· ─┬
· ╰── instead of '&&', use ';' or 'and'
╰────
help: use ';' instead of the shell '&&', or 'and' instead of the boolean '&&'
```
```
Error: nu::parser::shell_oror (link)
× The '||' operator is not supported in Nushell
╭─[entry #8:1:1]
1 │ ls || ls
· ─┬
· ╰── instead of '||', use 'try' or 'or'
╰────
help: use 'try' instead of the shell '||', or 'or' instead of the boolean '||'
```
```
Error: nu::parser::shell_err (link)
× The '2>' shell operation is 'err>' in Nushell.
╭─[entry #9:1:1]
1 │ foo 2> bar.txt
· ─┬
· ╰── use 'err>' instead of '2>' in Nushell
╰────
```
```
Error: nu::parser::shell_outerr (link)
× The '2>&1' shell operation is 'out+err>' in Nushell.
╭─[entry #10:1:1]
1 │ foo 2>&1 bar.txt
· ──┬─
· ╰── use 'out+err>' instead of '2>&1' in Nushell
╰────
help: Nushell redirection will write all of stdout before stderr.
```
# User-Facing Changes
**BREAKING CHANGES**
This removes the `&&` and `||` operators. We previously supported by
`&&`/`and` and `||`/`or`. With this change, only `and` and `or` are
valid boolean operators.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Ooops, fix the input redirection logic so we don't break vim.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
fixes#7384
This is a stop-gap fix until we remove type-directed parsing. With this,
you can create a `OneOf` shape that can be one of a list of syntax
shapes. This gives you a little more control than you get with `Any`,
allowing you to add `Block` without breaking other parsing rules.
# User-Facing Changes
`else` block will no longer capture variables as it will now use a block
instead of a closure.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.
This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix semicolon working for the following commands which runs to failed:
1. into record (example: `into record; echo 'aa'`) -- the final aa
shouldn't be printed
2. save ( example: `touch a; chmod a-w a; echo 'aa' | save a; echo asdf`
) -- the final asdf shouldn't be printed
3. fetch ( example: `touch a; chmod a-w a; fetch https://www.google.com
-o a; echo asdf` ) -- the final asdf shouldn't be printed
4. registry_query (I don't have window machine, sorry for that I can't
demo for it)
I've reviewed most of built-in commands, and it seems that other
commands works fine.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Title.
# User-Facing Changes
Faster seq that works better with functions that take in `ListStream`s.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
The block+closure split broke `watch` for some use cases. Fixed.
We should eventually add some tests for `watch` but it's a little tricky
since it's an interactive command.
Closes#7362.
# Description
Try to fix#7347, this pr does not fix the error message to `upserting
beyond 1 + the list's length doesn't work,`, I feel this is still not
explicit or general engouh, if we want to change, what would be the best
message to be printed out ?
Add tests too
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7110. ~~Note that unlike "real" `mut` vars, $env can be deeply
mutated via stuff like `$env.PYTHON_IO_ENCODING = utf8` or
`$env.config.history.max_size = 2000`. So, it's a slightly awkward
special case, arguably justifiable because of what $env represents (the
environment variables of your system, which is essentially "outside"
normal Nushell regulations).~~
EDIT: Now allows all `mut` vars to be deeply mutated using `=`, on
request.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
```rust
ToCsv
```
ToCsv was in there twice so I removed the 2nd reference...
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7278
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Add the input_output_types() to the ansi gradient command in support of
#7320
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
After the 0.72.1 hotfix, let's bump our dev builds to 0.72.2.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This change makes SQLite queries (`open foo.db`, `open foo.db | query db
"select ..."`) cancellable using `ctrl+c`. Previously they were not
cancellable, which made it unpleasant to accidentally open a very large
database or run an unexpectedly slow query!
UX-wise there's not too much to show:
## Notes
I was hoping to make SQLite queries streamable as part of this work, but
I ran into 2 problems:
1. `rusqlite` lifetimes are nightmarishly complex and they make it hard
to create a `ListStream` iterator
2. The functions on Nu's `CustomValue` trait return `Value` not
`PipelineData` and so `CustomValue` implementations can't stream data
AFAICT.
# Description
Windows doesn't support the --signal(-s) option, so don't show the
example in help.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
FIx the typo of `List` and also add more comments to other variants
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR changes the `schema` command for viewing the schema of a SQLite
database file. It removes 1 level of nesting (intended to handle
multiple databases in the same connection) that I believe is
unnecessary.
### Before
### After
## Rationale
A SQLite database connection can technically be associated with multiple
non-temporary databases using [the ATTACH DATABASE
command](https://www.sqlite.org/lang_attach.html). But it's not possible
to do that _in the context of Nushell_, and so I believe that there is
no benefit to displaying the schema as if there could be multiple
databases.
I initially raised this concern back in April, but we decided to keep
the database nesting because at the time we were still looking into more
generalized database functionality (i.e. not just SQLite). I believe
that rationale no longer applies.
Also, the existing code would not have worked correctly even if a
connection had multiple databases; for every database, it was looking up
tables without filtering them by database:
6295b20545/crates/nu-command/src/database/values/sqlite.rs (L104-L118)
## Future Work
I'd like to add information on views+triggers to the `schema` output.
I'm also working on making it possible to `ctrl+c` reading from a
database (which is turning into a massive yak shave).
# Description
This PR adds the ability to easily specific background colors using the
ansi command. It also allows you to use attributes.
I also updated the grid output to be clear that the output includes an
escape character, represented here by `\e`.
# User-Facing Changes
You can see a list of these new items with `ansi --list` with their long
and short names.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.
The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.
My hope is this will mitigate such senarios
1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241
# Description
(description of your pull request here)
# Tests
Make sure you've done the following:
- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass
# Documentation
- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
# Description
Closes: #7208
After this pr, histogram will output by count descending
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7246 and #1898.
Darren noticed that `open /dev/random` could not be interrupted by
`ctrl+c`. Thankfully the solution was very simple; it looks like we just
forgot to check `ctrlc` in the `impl Iterator for RawStream`!
To reproduce this, just run `open /dev/random` and then cancel it with
`ctrl+c`.
# Description
This simply adds an alias to the explore quit command in order to quit
out of explore. `:q` and `:q!` work now.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* Various help messages were edited for clarity/grammar/etc.
* Some examples were made more interesting or relevant
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* `$env.config.explore_config` renamed to `$env.config.explore`. This
follows the principle that config subrecords relating to single commands
(as this relates to `explore`) should be exactly named after the command
(see `ls`, `rm`, `table` etc.)
* In `into_config()`, moved the match arm relating to
`$env.config.explore` out of the "legacy options" section (which is
slated for removal in a later version).
# User-Facing Changes
`explore` is not in any public releases yet, so this has no end-user
impact.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The `where -b` flag was broken. The following now works:
```
let cond = {|x| $x.name !~ 'foo'}; ls | where -b $cond
```
This is just a quick fix. Ultimately, the `where` command shouldn't need
the flag and `where $cond` should work. The first step, however, is to
move `where` away from shape-directed parsing and make it a parser
keyword.
# User-Facing Changes
`where -b` is not broken
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Just some minor updates to xml deps
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7298
So `try .. catch` works better on external command failed.
# User-Facing Changes
```
try {nu --testbin fail} catch {print "fail"}
```
After this pr, it will output "fail"
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
# Description
* `-n`, `--natural` flag from `sort-by` is now on the plain `sort`.
* The `-i`, `-n` and `-r` flags now work with single record sorting
(formerly they didn't)
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is one of many commands that needs the `input_output_types()` part
of the signature filled in so that `$nu.scope.commands` shows the
signature properly which leads to the documentation being updated
properly.
TIL that when commands like `cal` don't have Example tests that can
easily be expressed and require the use of `None` results that we need
to use this as part of the signature.
```rust
.allow_variants_without_examples(true) // TODO: supply exhaustive examples
```
Related to https://github.com/nushell/nushell/issues/7287
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #6920
# User-Facing Changes
```
❯ "asdf" | save dump.rdb
Error:
× Destination file already exists
╭─[entry #21:1:1]
1 │ "asdf" | save dump.rdb
· ────┬───
· ╰── Destination file '/tmp/dump.rdb' already exists
╰────
help: you can use -f, --force to force overwriting the destination
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Warning: the `nu-json` crate seems to be undertested as the main test
code is commented out. Thus the unused dependencies there were just
commented out
# Description
Closes#7257
This fixes an issue where dataframes would always try to convert
datetimes with milliseconds. Since the timeunit is passed in, I make use
of it and try to choose the appropriate divisor.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Just bumping to the next dev version. Submitting as a draft until we're
ready.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This upgrades the `windows` and `trash` crates so we are only compiling
1 version of the `windows` crate ([I recently upgraded the version used
in `trash`](https://github.com/Byron/trash-rs/pull/58)).
I was hoping that this would lead to some decent compile time
improvements, but unfortunately it did not. Compiling 1 version of
`windows` with all the features unified is about as slow as compiling 2
versions with distinct feature sets. Still, might as well upgrade.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
I was thinking that it may be helpful to have a more verbose description
of our operators. Please let me know if you have better wording.
Also, while not strictly considered an operator, i added `not` to avoid
some confusion.
<img width="1574" alt="Screenshot 2022-11-28 at 7 57 30 PM"
src="https://user-images.githubusercontent.com/343840/204419666-7c4dbb43-26f5-4cd5-9a4e-a1555a9e700f.png">
# User-Facing Changes
Adds description column
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds a new command called `help operators`. The intention is to
make nushell's operators more discoverable.
Operations are evaluated in the precedence order (from highest to
lowest).
<img width="737" alt="Screenshot 2022-11-26 at 7 23 15 PM"
src="https://user-images.githubusercontent.com/343840/204115311-56765517-c36d-44d5-b303-43ffc0e980f6.png">
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fixes the compilation problems with `aarch64-apple-darwin` on rust
1.64 as well as the `zstd` problems. We recently found out that `zstd`
pinned to 1.65.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
chrono version update
# Description
upgrade chrono to 0.4.23
# Major Changes
If you're considering making any major change to nushell, before
starting work on it, seek feedback from regular contributors and get
approval for the idea from the core team either on
[Discord](https://discordapp.com/invite/NtAbbGn) or [GitHub
issue](https://github.com/nushell/nushell/issues/new/choose).
Making sure we're all on board with the change saves everybody's time.
Thanks!
# Tests + Formatting
Make sure you've done the following, if applicable:
- Add tests that cover your changes (either in the command examples, the
crate/tests folder, or in the /tests folder)
- Try to think about corner cases and various ways how your changes
could break. Cover those in the tests
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
* Help us keep the docs up to date: If your PR affects the user
experience of Nushell (adding/removing a command, changing an
input/output type, etc.), make sure the changes are reflected in the
documentation (https://github.com/nushell/nushell.github.io) after the
PR is merged.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
We already have the binary `bit-xor` and the shortcircuiting logical
`or`(`||`) and `and`(`&&`).
This introduces `xor` as a compact form for both brevity and clarity.
You can express the operation through `not`/`and`/`or` with a slight
risk of introducing bugs through typos.
Operator precedence
`and` > `xor` > `or`
Added logic and precedence tests.
# Description
This command converts things into records.
<img width="466" alt="Screenshot 2022-11-24 at 2 10 54 PM"
src="https://user-images.githubusercontent.com/343840/203858104-0e4445da-9c37-4c7c-97ec-68ec3515bc4b.png">
<img width="716" alt="Screenshot 2022-11-24 at 5 04 11 PM"
src="https://user-images.githubusercontent.com/343840/203872621-48cab199-ba57-44fe-8f36-9e1469b9c4ef.png">
It also converts dates into record but I couldn't get the test harness
to accept an example.
Thanks to @WindSoilder for writing the "hard" parts of this. :)
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
# Description
This makes the help messages cleaner for keyword-style arguments.
Before:
```
(optional) else_expression <Keyword([101, 108, 115, 101], Expression)>: expression or block to run if check fails
```
Now:
```
(optional) "else" + <expression>: expression or block to run if check fails
```
# User-Facing Changes
Changes how help is printed, so we use slightly different shape names
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This reverts commit ee81030600.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This removes the warning message we were getting on compilation...
```rust
warning: /Users/ma/j/tmp17/nushell/crates/nu-command/Cargo.toml: version requirement `=2.0.1+zstd.1.5.2` for dependency `zstd-sys` includes semver metadata which will be ignored, removing the metadata is recommended to avoid confusion
```
https://github.com/nushell/nushell/pull/7227
a slight modification of this PR
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR is a response to the issues raised in
https://github.com/nushell/nushell/pull/7087. It consists of two
changes:
* `export-env`, when evaluated in `overlay use`, will see the original
environment. Previously, it would see the environment from previous
overlay activation.
* Added a new `--reload` flag that reloads the overlay. Custom
definitions will be kept but the original definitions and environment
will be reloaded.
This enables a pattern when an overlay is supposed to shadow an existing
environment variable, such as `PROMPT_COMMAND`, but `overlay use` would
keep loading the value from the first activation. You can easily test it
by defining a module
```
module prompt {
export-env {
let-env PROMPT_COMMAND = (date now | into string)
}
}
```
Calling `overlay use prompt` for the first time changes the prompt to
the current time, however, subsequent calls of `overlay use` won't
change the time. That's because overlays, once activated, store their
state so they can be hidden and restored at later time. To force-reload
the environment, use the new flag: Calling `overlay use --reload prompt`
repeatedly now updates the prompt with the current time each time.
# User-Facing Changes
* When calling `overlay use`, if the module has an `export-env` block,
the block will see the environment as it is _before_ the overlay is
activated. Previously, it was _after_.
* A new `overlay use --reload` flag.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds `break`, `continue`, `return`, and `loop`.
* `break` - breaks out a loop
* `continue` - continues a loop at the next iteration
* `return` - early return from a function call
* `loop` - loop forever (until the loop hits a break)
Examples:
```
for i in 1..10 {
if $i == 5 {
continue
}
print $i
}
```
```
for i in 1..10 {
if $i == 5 {
break
}
print $i
}
```
```
def foo [x] {
if true {
return 2
}
$x
}
foo 100
```
```
loop { print "hello, forever" }
```
```
[1, 2, 3, 4, 5] | each {|x|
if $x > 3 { break }
$x
}
```
# User-Facing Changes
Adds the above commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The `zstd` team released a version that breaks dataframe compilation.
This change pins to `zstd-sys = "=2.0.1+zstd.1.5.2"` in order to prevent
the required `+nightly` build flag.
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Since we're not implementing `&&` or `||`, let's remove their pipeline
elements.
# User-Facing Changes
Nothing user facing. These were not yet implemented.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
A small follow-up to #7221. This changes the `catch` block from a block
to a closure, so that it can access the error returned from the `try`
block. This helps with a common scenario: "the `try` block failed, and I
want to log why it failed."
### Example
### Future Work
Nu's closure syntax is a little awkward here; it might be nicer to allow
something like `catch err { print $err }`. We discussed this on Discord
and it will require special parser code similar to what's already done
for `for`.
I'm not feeling confident enough in my parser knowledge to make that
change; I will spend some more time looking at the `for` code but I
doubt I will be able to implement anything in the next few days.
Volunteers welcome.
# Description
This adds `try` (with an optional `catch` piece). Much like other
languages, `try` will try to run a block. If the block fails to run
successfully, the optional `catch` block will run if it is available.
# User-Facing Changes
This adds the `try` command.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is a set of fixes to `err>` to make it work a bit more predictably.
I've also revised the tests, which accidentally tested the wrong thing
for redirection, but should be more correct now.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
`uniq -i` does not convert output strings to lowercase.
Also, `uniq -i` did not ignore case in strings below the first level of
Tables and Records. Now all strings case are ignored for all children
Values for tables, Records, and List.
Fixes https://github.com/nushell/nushell/issues/7192
# Tests + Formatting
About the issue https://github.com/nushell/nushell/issues/7192, the
output will be:
```
〉[AAA BBB CCC] | uniq -i
╭───┬─────╮
│ 0 │ AAA │
│ 1 │ BBB │
│ 2 │ CCC │
╰───┴─────╯
```
About ignoring case for all children string, I expect this to be true:
```
([[origin, people];
[World, (
[[name, meal];
['Geremias', {plate: 'bitoque', carbs: 100}]
]
)],
[World, (
[[name, meal];
['Martin', {plate: 'bitoque', carbs: 100}]
]
)],
[World, (
[[name, meal];
['Geremias', {plate: 'Bitoque', carbs: 100}]
]
)],
] | uniq -i
) == ([[origin, people];
[World, (
[[name, meal];
['Geremias', {plate: 'bitoque', carbs: 100}]
]
)],
[World, (
[[name, meal];
['Martin', {plate: 'bitoque', carbs: 100}]
]
)]
])
```
This PR closses issue #7155, where now providing a non valid color will
just ignore it and use the default.
Making the same changes as the original issue just starts nushell
without crashing.
# Description
Closes#6803.
You can look at the code and see this was always supposed to work this
way, but was broken due to 1 line (per file).
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While trying to add a new `uniq-by` command I refactored the `uniq`
command code to understand it and try to reuse. I think this is more
compact and easier to understand.
The part that I think it's a little confusing in this refactor is the
conditions inside `.filters()`, for example: `!flag_show_repeated ||
(value.1 > 1)`. I could use `if (flag_show_repeated) {value.1 > 1} else
{true}` but it is more verbose, what do you think?
PS: Not sure if you like this kind of PR, sorry if not.
# Tests + Formatting
I also added a test where the `uniq` has a table as input.
# Description
BEFORE:
```
〉ls | size
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #22:1:1]
1 │ ls | size
· ──┬─
· │╰── value originates from here
· ╰── expected: string
╰────
〉ls | sort-by SIZE
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #17:1:1]
1 │ ls | sort-by SIZE
· ───┬───
· │╰── value originates here
· ╰── cannot find column
╰────
〉[4kb] | path join 'b'
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #6:1:1]
1 │ [4kb] | path join 'b'
· ──┬──
· │╰── value originates from here
· ╰── expected: string or record
╰────
```
AFTER:
```
〉ls | size
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #1:1:1]
1 │ ls | size
· ─┬ ──┬─
· │ ╰── expected: string
· ╰── value originates from here
╰────
〉ls | get 0 | sort-by SIZE
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #2:1:1]
1 │ ls | get 0 | sort-by SIZE
· ─┬ ───┬───
· │ ╰── cannot find column 'SIZE'
· ╰── value originates here
╰────
〉[4kb] | path join 'b'
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #1:1:1]
1 │ [4kb] | path join 'b'
· ──┬── ────┬────
· │ ╰── expected: string or record
· ╰── value originates from here
╰────
```
(Hey, anyone noticed that there's TWO wordings of "value originates from
here" in this codebase………?)
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes a two's complement underflow/overflow when given a negative arg.
Breaking change as it is throwing an error instead of most likely
returning most of the output.
Same behavior as #7184
# Tests + Formatting
+ 1 failure test
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
- Error on negative argument to `last`
- Add test for negative value in last
Follow-up for #7178
# User-Facing Changes
Breaking change:
even before #7178 `last` returned an empty `list<any>` when given
negative indices.
Now this is an
[error](https://docs.rs/nu-protocol/latest/nu_protocol/enum.ShellError.html#variant.NeedsPositiveValue)
Note:
In #7136 we are considering supporting negative indexing
# Tests + Formatting
+ 1 failure test
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #6937
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
I noticed that some json values are not parsed at the top level, for
example: `null`, `true`, `false`. Although this is a valid json.
```
> "null" | from json
Error:
× Error while parsing JSON text
╭─[entry #12:1:1]
1 │ "null" | from json
· ────┬────
· ╰── error parsing JSON text
╰────
Error:
× Error while parsing JSON text
╭────
1 │ null
╰────
```
I tried to fix it and it seems to work fine.
# User-Facing Changes
It should give fewer errors.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
rust 1.65.0 has been released for a while, this pr applies lint
suggestions from rust 1.65.0.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
BEFORE (notice Windows paths look wrong):
```
〉mv 8 9
Error:
× Destination file already exists
╭─[entry #22:1:1]
1 │ mv 8 9
· ┬
· ╰── you can use -f, --force to force overwriting the destination
╰────
〉mv d1 tmp
Error:
× Can't move "C:\\Users\\Leon\\TODO\\d1" to "C:\\Users\\Leon\\TODO\\tmp\\d1"
╭─[entry #19:1:1]
1 │ mv d1 tmp
· ─┬─
· ╰── Directory not empty
╰────
```
AFTER (full paths are now included in the arrows' messages to make lines
like `mv $foo` entirely unambiguous):
```
〉mv 8 9
Error:
× Destination file already exists
╭─[entry #4:1:1]
1 │ mv 8 9
· ┬
· ╰── Destination file 'C:\Users\Leon\TODO\tmp\9' already exists
╰────
help: you can use -f, --force to force overwriting the destination
〉mv d1 tmp
Error:
× Can't move 'C:\Users\Leon\TODO\d1' to 'C:\Users\Leon\TODO\tmp\d1'
╭─[entry #3:1:1]
1 │ mv d1 tmp
· ─┬─
· ╰── Directory 'C:\Users\Leon\TODO\tmp' is not empty
╰────
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when execute external sub command, auto-trimming end
new-lines, like how fish shell does.
And if the command is executed directly like: `cat tmp`, the result
won't change.
Fixes: #6816Fixes: #3980
Note that although nushell works correctly by directly replace output of
external command to variable(or other places like string interpolation),
it's not friendly to user, and users almost want to use `str trim` to
trim trailing newline, I think that's why fish shell do this
automatically.
If the pr is ok, as a result, no more `str trim -r` is required when
user is writing scripts which using external commands.
# User-Facing Changes
Before:
<img width="523" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468810-86b04dbb-c147-459a-96a5-e0095eeaab3d.png">
After:
<img width="505" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468599-7b537488-3d6b-458e-9d75-d85780826db0.png">
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Spotted by @WindSoilder - don't redirect stdout if the user requests
`err>`.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Following up on #7180 with some feature cleanup:
- Move the `database` feature from `plugin` to `default`
- Rename the `database` feature to `sqlite`
- Remove `--features=extra` from a lot of scripts etc.
- No need to specify this, the `extra` feature is now the same as the
default feature set
- Remove the now-redundant 2nd Ubuntu test run
# Description
Support for this breaking change was raised in #7191. This affects
`sort`, `sort-by`, `str contains` and `find`. `--ignore-case` is used by
a few POSIX programs such as `less` and `grep`, as well as a few other
popular utils like `tree` and `wget`. Since long names aren't especially
popular (existing primarily for self-documentation purposes), I consider
this on the shallow end of the compat-break scale.
Note that the `-i` short flag is not affected.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This adds new pipeline connectors called out> and err> which redirect either stdout or stderr to a file. You can also use out+err> (or err+out>) to redirect both streams into a file.
Currently `last n` memory use is O(input), while it should be O(n). This
patch replaces code collecting all of last's input into a Vec<_> with
collecting into a bounded VecDeque<_>. UI/UX remain are unchanged.
Alters `all`, `any`, `each while`, `each`, `insert`, `par-each`, `reduce`, `update`, `upsert` and `where`,
so that their blocks take an optional parameter containing the index.
* Make json require string and pass around metadata
The json deserializer was accepting any inputs by coercing non-strings
into strings. As an example, if the input was `[1, 2]` the coercion
would turn into `[12]` and deserialize as a list containing number
twelve instead of a list of two numbers, one and two. This could lead
to silent data corruption.
Aside from that pipeline metadata wasn't passed aroud.
This commit fixes the type issue by adding a strict conversion
function that errors if the input type is not a string or external
stream. It then uses this function instead of the original
`collect_string()`. In addition, this function returns the pipeline
metadata so it can be passed along.
* Make other formats require string
The problem with json coercing non-string types to string was present in
all other text formats. This reuses the `collect_string_strict` function
to fix them.
* `IntoPipelineData` cleanup
The method `into_pipeline_data_with_metadata` can now be conveniently
used.
* add signature information when help on one command
* tell user that one command support operated on cell paths
Also, make type output to be more friendly, like `record<>` should just be `record`
And the same to `table<>`, which should be `table`
* simplify code
* don't show signatures for parser keyword
* update comment
* output arg syntax shape as type, so it's the same as describe command
* fix string when no positional args
* update signature body
* update
* add help signature test
* fix arg output format for composed data type like list or record
* fix clippy
* add comment
* Grouped config commands better
* Tweaked test slightly
* Fix merge conflict(?)
* Remove recently-added test case
* Revert rm.always_trash default
* Untweak rm help messages
* Formatting
* Remove example
* Add deprecation warning
* Remove deprecation timeline
Not sure we want to commit to a specific timeline just yet
Co-authored-by: Reilly Wood <26268125+rgwood@users.noreply.github.com>
* Add input and output types to $nu.scope.commands
This commit changes the schema: instead of
command.signature: table
we now have
command.signatures: list<table>
with one signature for every input-output type pair.
* Represent signatures as a map from input_type to signature
* Sort signature entries
* Drop command name from signature tables
* Don't use "rest" as name of rest parameter; use empty string instead
* Bug fix: was creating records with repeated keys
E.g.
$nu.scope.commands | where name == 'hash sha256' | get signatures.0 | table -e
$nu.scope.commands | where name == 'transpose' | get signatures.0 | table -e
* removes unused features.
* Adds back multithreading feature to sysinfo.
* Adds back alloc for percent-encoding
* Adds updated lock file.
* Missed one sysinfo.
* `indexmap` just defaults
* Revert `miette``default-features=false`
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
This adds support for (limited) mutable variables. Mutable variables are created with mut much the same way immutable variables are made with let.
Mutable variables allow mutation via the assignment operator (=).
❯ mut x = 100
❯ $x = 200
❯ print $x
200
Mutable variables are limited in that they're only tended to be used in the local code block. Trying to capture a local variable will result in an error:
❯ mut x = 123; {|| $x }
Error: nu::parser::expected_keyword (link)
× Capture of mutable variable.
The intent of this limitation is to reduce some of the issues with mutable variables in general: namely they make code that's harder to reason about. By reducing the scope that a mutable variable can be used it, we can help create local reasoning about them.
Mutation can occur with fields as well, as in this case:
❯ mut y = {abc: 123}
❯ $y.abc = 456
❯ $y
On a historical note: mutable variables are something that we resisted for quite a long time, leaning as much as we could on the functional style of pipelines and dataflow. That said, we've watched folks struggle to work with reduce as an approximation for patterns that would be trivial to express with local mutation. With that in mind, we're leaning towards the happy path.
- Custom commands are true for builtin and custom
- Add classification as external command
- Specify wildcard in keyword: keyword is true for builtin and keyword
* Fix ignore-errors for select
* fix Value::List match
* fix invalid rows
* add tests
* fix ListStream match
* add one more test for ListStream
* add more tests
* tweak words
* Add failing test that list of ints and floats is List<Number>
* Start defining subtype relation
* Make it possible to declare input and output types for commands
- Enforce them in tests
* Declare input and output types of commands
* Add formatted signatures to `help commands` table
* Revert SyntaxShape::Table -> Type::Table change
* Revert unnecessary derive(Hash) on SyntaxShape
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* New "display_output" hook.
* Fix unrelated "clippy" complaint in nu-tables crate.
* Fix code-formattng and style issues in "display_output" hook
* Enhance eval_hook to return PipelineData.
This allows a hook (including display_output) to return a value.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Allows use of slightly optimized variants that check if they have to use
the heavier vte parser. Tries to avoid unnnecessary allocations. Initial
performance characteristics proven out in #4378.
Also reduces boilerplate with right-ward drift.
* fix: fixcd
try to fix
Log: try to fix the bug with can enter a permisson error fold
* change wording
* fat
* fmt
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Bump nushell-sytem dep to ntapi 0.4
0.3.7 trigger a warning about code being incompatible
with future rust versions. This is resolved in 0.4
https://github.com/MSxDOS/ntapi/issues/11
* Upgrade Cargo.lock for ntapi 0.4
* make format filesize more flexible
* make code simpler
* finish refactor on bytes commands
* finish refactor on str commands
* fimplify code
* rename from column_paths to cell_paths
* fix: ✨ "saner" default for mv
fixes#6747
As highlighted in the issue, the default behavior of nu currently
is to overwrite the destination file without notice.
This is not a "standard" expectation users that want this behavior
can create a dedicated alias.
* fix: 📝 edit the comment
* fix: ✨ updated the tests
* fix: 🚧 use --force for case test
* Remove unused dependencies
Inspired by #6938 ran `cargo +nightly udeps --features extra`.
Removes 2 crates and should remove an unnecessary intra-workspace
dependency which might open up further opportunities for compilation.
* Make windows-only dependency conditional in toml
`omnipath` is only used on Windows and already behind a `#[cfg]` block
in the code. Made the dependency in `Cargo.toml` conditional as well.
* Make `nu-pretty-hex` example a proper example
This allows making `rand` a dev-dependency in this crate.
This reduces the number of dependencies to build for `cargo build` or
`cargo run` by around 19.
Will not speed up CI as we need to `cargo test` but should help for
`cargo install` or users just building from source.
Time saved on my machine ~0.8 secs so likely unnoticable in noise.
Larger future goal is reducing longer dependency chains to allow more
parallel compilation.
Avoids compiling the crate twice due to incompatible versions from
dependencies. This avoids binary bloat before linking as well.
Narrow our feature selection to the used modules/functions to save
compile time. On my machine reduces `nix` crate compile time from
around 9 secs to 0.9 secs.
Fixes#6895
Warning: `Iterator::map_while` does not return a `FusedIterator`!
Depending on the consuming adaptor or code (e.g. for loop) the iteration
may be stopped but this is not guaranteed.
Adds a test example but Examples handle iterators like
`FusedIterator` and thus don't catch the regression
Cleanup the message on another test
Disable backtrace on miette
- gimli crate requires several seconds
Disable diagnostics on wax
- depends on an outdated miette version
Builds fine, no observable loss in diagnostics quality of life
Removes 10 crates that have to be compiled.
* Remove unnecessary `#[allow]` annots
Reduce the number of lint exceptions that are not necessary with the
current state of the code (or more recent toolchain)
* Remove dead code from `FileStructure` in nu-command
* Replace `allow(unused)` with relevant feature switch
* Deal with `needless_collect` with annotations
* Change hack for needless_collect in `from json`
This change obviates the need for `allow(needless_collect)`
Removes a pessimistic allocation for empty strings, but increases
allocation size to `Value`
Probably not really worth it.
* Revert "Deal with `needless_collect` with annotations"
This reverts commit 05aca98445.
The previous state seems to better from a performance perspective as a
`Vec<String>` is lighter weight than `Vec<Value>`
* Wrap `open` parse errors from `from` commands
Minimal fix for #6843
This propagates the underlying errors from the called `from` commands
and adds a top-level error with the full path and the understood file
extension and resulting called command.
* Repoint inner span for `from ...` to `open`
* Add actionable message: refer to help or use --raw
* Add support to render right prompt on last line of the prompt
* reset reedline to main branch
* update reedline to fix right prompt to be rendered correctly
* reset reedline to main branch again
* Make Tab insert (partial) completion instead of select next menu item
* Use reedline feature branch
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Reorder conditional deps for readability
* Pull reedline from the most recent main branch
* Map 'Submit' and 'SubmitOrNewline' events
Introduced by nushell/reedline#490
* Filter out empty glob patterns
An empty argument to the "glob" command will now produce an empty result.
Working towards nushell/nushell#6653.
* Run `cargo fmt --all`
Just autoformatted the repo so that CI passes and we have a consistent code
format across modules.
* Treat empty glob argument as error
The glob command will now report an empty string argument as an error instead
of silently ignoring it.
See https://github.com/nushell/nushell/pull/6707#discussion_r993345013.
* Add tests for glob command
Two small tests for the glob command, one to check that the empty string errors
it, and another to sanity check the '*' glob, have been added.
* Rename glob sanity check star test
Co-authored-by: Kyle Anderson <kyle.anderson@uwaterloo.ca>
* Add search terms for uppercase
* Add search terms
* Add search terms
* Change to parse
* Add search terms for from
* Add search terms for to
* Remove duplicate function
* Remove duplication of search terms
* Remove search term
The `--force-with-lease` flag was given as requiring an additional string which is not true.
Fixes#6644
for this to take effect you need to update your `config.nu`
* add a new command to query the registry on windows
* cross platform tweaks
* return nushell datatype
* change visibility of exec and registry commands
* Revert "Revert "Try again: in unix like system, set foreground process while running external command (#6273)" (#6542)"
This reverts commit 2bb367f570.
* Make foreground job control hopefully work correctly
These changes are mostly inspired by the glibc manual.
* Fix typo in external command description
* Only restore tty control to shell when no fg procs are left; reuse pgrp
* Rework terminal acquirement code to be like fish
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* remove export_env command
* remove several export env usage in test code
* adjust hiding relative test case
* fix clippy
* adjust tests
* update tests
* unignore these tests to expose ut failed
* using `use` instead of `overlay use` in some tests
* Revert "using `use` instead of `overlay use` in some tests"
This reverts commit 2ae24b24c3.
* Revert "adjust hiding relative test case"
This reverts commit 4369af6d05.
* Bring back module example
* Revert "update tests"
This reverts commit 6ae94ef513.
* Fix tests
* "Fix" a test
* Remove remaining deprecated env functionality
* Re-enable environment hiding for `hide`
To not break virtualenv since the overlay update is not merged yet
* Fix hiding env in `hide` and ignore some tests
Co-authored-by: kubouch <kubouch@gmail.com>
* fix issue 6602 (broken highlighting in find)
Find uses highlight_search_string to see where the string was found. The problem was that the style would just "append" to the existing haystack (including the ANSI escape codes of LS_COLORS).
This first strips the ANSI escape codes out of the haystack before formatting the
output string.
* update formatting
* Copy lev_distance.rs from the rust compiler
* Minor changes to code from rust compiler
* "Did you mean" suggestions: test instrumented to generate markdown report
* Did you mean suggestions: delete test instrumentation
* Fix tests
* Fix test
`foo` has a genuine match: `for`
* Improve tests
* Add "space" key to bind in vi normal mode
Implements #6586
No special logic to prevent you from binding it in other modes!
Needs a separate change to reedline to make it available in the default
listing of `keybindings list`.
* Update reedline to report the available `space`
Pulls in nushell/reedline#486
* Apply clippy fix to avoid extra allocation
error: `format!(..)` appended to existing `String`
--> crates/nu-engine/src/documentation.rs:82:9
|
82 | long_desc.push_str(&format!("\n{G}Subcommands{RESET}:\n"));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `-D clippy::format-push-string` implied by `-D warnings`
= help: consider using `write!` to avoid the extra allocation
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#format_push_string
error: `format!(..)` appended to existing `String`
--> crates/nu-engine/src/documentation.rs:96:9
|
96 | long_desc.push_str(&format!("\n{G}Parameters{RESET}:\n"));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider using `write!` to avoid the extra allocation
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#format_push_string
error: `format!(..)` appended to existing `String`
--> crates/nu-engine/src/documentation.rs:128:9
|
128 | long_desc.push_str(&format!("\n{}Examples{}:", G, RESET));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider using `write!` to avoid the extra allocation
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#format_push_string
error: `format!(..)` appended to existing `String`
--> crates/nu-engine/src/documentation.rs:202:5
|
202 | long_desc.push_str(&format!("\n{}Flags{}:\n", G, RESET));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider using `write!` to avoid the extra allocation
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#format_push_string
error: could not compile `nu-engine` due to 4 previous errors
* Apply clippy fix to avoid deref on an immutable reference
error: deref on an immutable reference
--> crates/nu-command/src/dataframe/eager/sql_context.rs:188:77
|
188 | SetExpr::Select(select_stmt) => self.execute_select(&*select_stmt)?,
| ^^^^^^^^^^^^^
|
= note: `-D clippy::borrow-deref-ref` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#borrow_deref_ref
help: if you would like to reborrow, try removing `&*`
|
188 | SetExpr::Select(select_stmt) => self.execute_select(select_stmt)?,
| ~~~~~~~~~~~
help: if you would like to deref, try using `&**`
|
188 | SetExpr::Select(select_stmt) => self.execute_select(&**select_stmt)?,
| ~~~~~~~~~~~~~~
error: deref on an immutable reference
--> crates/nu-command/src/database/values/dsl/expression.rs:252:15
|
252 | match &*expr {
| ^^^^^^ help: if you would like to reborrow, try removing `&*`: `expr`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#borrow_deref_ref
error: could not compile `nu-command` due to 2 previous errors
* trim overlay name
* format
* Update tests/overlays/mod.rs
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
* cleanup
* new tests
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
* Disable clickable links when we can't get metadata of files
Fixes#6498
* Refactor path name rendering related code
* Make clickable links smarter
* Remove unneeded clone
* Return early if `use_ls_colors` is disabled
* default to if cellpath not found
* fmt
* add test
* fix test
* fix clippy
* move behaviour behind `-i` flag
* prevent any possibility of an unspanned error
* ignore all errors
* seperate testes
* fmt
This is a de-facto standard supported by many terminals, originally
added to macOS Terminal.app, now also supported by VTE (GNOME),
Konsole (KDE), WezTerm, and more.
* Add support for Arrow IPC file format
Add support for Arrow IPC file format to dataframes commands. Support
opening of Arrow IPC-format files with extension '.arrow' or '.ipc' in
the open-df command. Add a 'to arrow' command to write a dataframe to
Arrow IPC format.
* Add unit test for open-df on Arrow
* Add -t flag to open-df command
Add a `--type`/`-t` flag to the `open-df` command, to explicitly specify
the type of file being used. Allowed values are the same at the set of
allowed file extensions.
* Initialize join.rs as a copy of collect.rs
* Evolve StrCollect into StrJoin
* Replace 'str collect' with 'str join' everywhere
git ls-files | lines | par-each { |it| sed -i 's,str collect,str join,g' $it }
* Deprecate 'str collect'
* Revert "Deprecate 'str collect'"
This reverts commit 959d14203e.
* Change `str collect` help message to say that it is deprecated
We cannot remove `str collect` currently (i.e. via
`nu_protocol::ShellError::DeprecatedCommand` since a prominent project
uses the API:
b85542c31c/src/virtualenv/activation/nushell/activate.nu (L43)
* Add a 'commandline' command for manipulating the current buffer
from `executehostcommand` keybindings. Inspired by fish:
https://fishshell.com/docs/current/cmds/commandline.html
* Update to development reedline
Includes nushell/reedline#472
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* Improve wording around `all` and `any`
The role of the `predicate` for `all` and `any` was not as clear.
See #6499
* type-o
* type-o
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Rename `all?`, `any?` and `empty?` to `all`, `any` and `is-empty` for sake of simplicity and consistency.
- More understandable for newcomers, that these commands are no special to others.
- `?` syntax did not really aprove readability. For me it made it worse.
- We can reserve `?` syntax for any other nushell feature.
* Terminate REPL if not connected to tty input
If the standard input stream is not a TTY abort the REPL execution.
Solves a problem as the current REPL tries to be IO fault tolerant and
would indefinetely fail when crossterm tries to handle the STDIN.
Fixesnushell/nushell#6452
* Improve the error message
* Avoid update_last_command_context "No command run" error
When using `executehostcommand` bindings without having run actual user input commands yet,
update_last_command_context is guaranteed to fail. A function has been added to reedline
that allows checking for this case.
* Update to most recent reedline
Includes bugfixes around the (SQlite) history
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* Add source-env test for dynamic path
* Use correct module ID for env overlay imports
* Remove parser check from "overlay list"
It would cause unnecessary errors from some inner scope if some
overlay module was also defined in some inner scope.
* Restore Cargo.lock back
* Remove comments
* add new function to remove data at a cellpath; allow reject to use cellpath
* add tests
* fmt
* fix clippt
* get it working properly with lists of records
* fix clippy, hopefully
* fix clippy, hopefully 2
* remove unnecessary FlatShape
* add proptest
* remove files that belonged in another PR
* more tests, more chars
* add exception for parser error unrelated ot PR
* Fix ps command CPU usage on Apple Silicon M1 macs. #4142
The cpu user and system times returned my libproc are not in
nanoseconds; they are in mach ticks units. This is not documented very
well. The convert from mach ticks to ns, the kernel provides a timebase
info function and datatype:
https://developer.apple.com/documentation/driverkit/3433733-mach_timebase_info
The commit makes the PS command work for me.
* Cargo fmt of previous commit.
* Clippy format suggestion
Co-authored-by: Ondrej Baudys <ondrej.baudys@nextgen.net>
* nu-path: use 'linux' code on all non-macOS unix
* nu-command: cfg() the Ps command to platforms it's actually implemented on
* nu-system: cfg() the Ps test to the platforms Ps is implemented on
* start working on source-env
* WIP
* Get most tests working, still one to go
* Fix file-relative paths; Report parser error
* Fix merge conflicts; Restore source as deprecated
* Tests: Use source-env; Remove redundant tests
* Fmt
* Respect hidden env vars
* Fix file-relative eval for source-env
* Add file-relative eval to "overlay use"
* Use FILE_PWD only in source-env and "overlay use"
* Ignore new tests for now
This will be another issue
* Throw an error if setting FILE_PWD manually
* Fix source-related test failures
* Fix nu-check to respect FILE_PWD
* Fix corrupted spans in source-env shell errors
* Fix up some references to old source
* Remove deprecation message
* Re-introduce deleted tests
Co-authored-by: kubouch <kubouch@gmail.com>
* Test commands for proper names and search terms
Assert that the `Command.name()` is equal to `Signature.name`
Check that search terms are not just substrings of the command name as
they would not help finding the command.
* Clean up search terms
Remove redundant terms that just replicate the command name.
Try to eliminate substring between search terms, clean up where
necessary.
This PR merges all the completions tests into one file.
The reason for them to be separated was organization, so we wouldn't need to scroll a huge file.
But that came with another issue, because rust generates a new binary for each completion test file and each completion test depends on Nu looks like all the dataframes were coming into each test file as well (as pointed by @rgwood
* Revert "Fix intermittent test crash (#6268)"
This reverts commit 555d9ee763.
* make a working version again
* try second impl
* add
* fmt
* check stdin is atty before acquire stdin
* add libc
* clean comment
* fix typo
* Update after Reedline API update
* Remove references to deleted `ReedlineEvent::ActionHandler`
* Update `DescriptionMenu` implementation for the new `Menu` trait
API changes that work on `Editor` rather than `LineBuffer` objects
* Update reedline
Includes nushell/reedline#460
Co-authored-by: Ben Parks <bnprks+git@gmail.com>
* Add hide-env to hide env vars; Cleanup tests
Also, there were some old unalias tests that I converted to hide.
* Add missing file
* Re-enable hide for env vars
* Fix test
* Rename did you mean error back
It was causing random tests to break
* Add decimals to int when using `into string --decimals`
* Add tests for `into string` when converting int with `--decimals`
* Apply formatting
* Merge `into_str` test files
* Comment out unused code and add TODOs
* Use decimal separator depending on system locale
* Add test helper to run closure in different locale
* Add tests for int-to-string conversion using different locales
* Add utils function to get system locale
* Add panic message when locking mutex fails
* Catch and resume panic later to prevent Mutex poisoning when test fails
* Move test to `nu-test-support` to keep `nu-utils` free of `nu-*` dependencies
See https://github.com/nushell/nushell/pull/6085#issuecomment-1193131694
* Rename test support fn `with_fake_locale` to `with_locale_override`
* Move `get_system_locale()` to `locale` module
* Allow overriding locale with special env variable (when not in release)
* Use special env var to override locale during testing
* Allow callback to return a value in `with_locale_override()`
* Allow multiple options in `nu!` macro
* Allow to set locale as `nu!` macro option
* Use new `locale` option of `nu!` macro instead of `with_locale_override`
Using the `locale` options does not lock the `LOCALE_OVERRIDE_MUTEX`
mutex in `nu-test-support::locale_override` but instead calls the `nu`
command directly with the `NU_LOCALE_OVERRIDE` environment variable.
This allows for parallel test excecution.
* Fix: Add option identifier for `cwd` in usage of `nu!` macro
* Rely on `Display` trait for formatting `nu!` macro command
- Removed the `DisplayPath` trait
- Implement `Display` for `AbsolutePath`, `RelativePath` and
`AbsoluteFile`
* Default to locale `en_US.UTF-8` for tests when using `nu!` macro
* Add doc comment to `nu!` macro
* Format code using `cargo fmt --all`
* Pass function directly instead of wrapping the call in a closure
https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure
* Pass function to `or_else()` instead of calling it inside `or()`
https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
* Fix: Add option identifier for `cwd` in usage of `nu!` macro
* add -p for path expand, so it doesn't follow symlink
* fix arg name
* rename from no-dereferenct to no-follow-link
* rename from no-follow-link to no-symlink, and change short -p to -n
* follow strict first
* fix
* simplify test
* fix clippy
* fix test on windows
* when spawned process during register plugin, pass env to child process
* tweak comment
* tweak comment
* remove trailing whitespace
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
`rstest = 0.12` added support for asynchronous timeouts during testing
thus requiring a larger set of dependencies. Since `rstest = 0.14` this
can be disabled if not used.
Should keep build times for local or CI tests in check.
The test was reading the operating system error message which is
dependent on the system locale.
Just test for the `(os error 2)` errorcode instead.
This should support both
unixoid systems and Windows in more locales.
* while executing external command, make it as foreground
* remove useless file
* add comment, make var more readable
* add comment
* fmt code
* fix windows
* fix func name
* fix clippy
* fix windows clippy
* add comments, introduce `ForegroundProcess and ForegroundChild
* fix windows clippy
* fix on windows
* no need fg_process_setup module
* Revert "no need fg_process_setup module"
This reverts commit 21ee4ffbf6.
* restrict visibility for helper functions
* add a new welcome banner to nushell
* remove top line
* tweaked colors and wording
* changed to dimmed white
* removed a comment
* make config nu stand out a little
* fix type-o
* Allow private imports inside modules
Can call `use ...` inside modules now.
* Add more tests
* Add a leak test
* Refactor exportables; Prepare for 'export use'
* Fix description
* Implement 'export use' command
This allows re-exporting module's commands and aliases from another
module.
* Add more tests; Fix import pattern list strings
The import pattern strings didn't trim the surrounding quotes.
* Add ignored test
* Fix ls panics when a file or directory not exists
Fixes#6146
Signed-off-by: nibon7 <nibon7@163.com>
* add test
Signed-off-by: nibon7 <nibon7@163.com>
* expand durations to include month, year, decade
* remove commented out fn
* oops, found more debug comments
* tweaked tests for the new way, borrowed heavily from chrono-humanize-rs
* clippy
* grammar
* Skeleton implementation
Lots and lots of TODOs
* Bootstrap simple CustomValue plugin support test
* Create nu_plugin_custom_value
* Skeleton for nu_plugin_custom_values
* Return a custom value from plugin
* Encode CustomValues from plugin calls as PluginResponse::PluginData
* Add new PluginCall variant CollapseCustomValue
* Handle CollapseCustomValue plugin calls
* Add CallInput::Data variant to CallInfo inputs
* Handle CallInfo with CallInput::Data plugin calls
* Send CallInput::Data if Value is PluginCustomValue from plugin calls
* Remove unnecessary boxing of plugins CallInfo
* Add fields needed to collapse PluginCustomValue to it
* Document PluginCustomValue and its purpose
* Impl collapsing using plugin calls in PluginCustomValue::to_base_value
* Implement proper typetag based deserialization for CoolCustomValue
* Test demonstrating that passing back a custom value to plugin works
* Added a failing test for describing plugin CustomValues
* Support describe for PluginCustomValues
- Add name to PluginResponse::PluginData
- Also turn it into a struct for clarity
- Add name to PluginCustomValue
- Return name field from PluginCustomValue
* Demonstrate that plugins can create and handle multiple CustomValues
* Add bincode to nu-plugin dependencies
This is for demonstration purposes, any schemaless binary seralization
format will work. I picked bincode since it's the most popular for Rust
but there are defintely better options out there for this usecase
* serde_json::Value -> Vec<u8>
* Update capnp schema for new CallInfo.input field
* Move call_input capnp serialization and deserialization into new file
* Deserialize Value's span from Value itself instead of passing call.head
I am not sure if this was correct and I am breaking it or if it was a
bug, I don't fully understand how nu creates and uses Spans. What should
reuse spans and what should recreate new ones?
But yeah it felt weird that the Value's Span was being ignored since in
the json serializer just uses the Value's Span
* Add call_info value round trip test
* Add capnp CallInput::Data serialization and deserialization support
* Add CallInfo::CollapseCustomValue to capnp schema
* Add capnp PluginCall::CollapseCustomValue serialization and deserialization support
* Add PluginResponse::PluginData to capnp schema
* Add capnp PluginResponse::PluginData serialization and deserialization support
* Switch plugins::custom_values tests to capnp
Both json and capnp would work now! Sadly I can't choose both at the
same time :(
* Add missing JsonSerializer round trip tests
* Handle plugin returning PluginData as a response to CollapseCustomValue
* Refactor plugin calling into a reusable function
Many less levels of indentation now!
* Export PluginData from nu_plugin
So plugins can create their very own serve_plugin with whatever
CustomValue behavior they may desire
* Error if CustomValue cannot be handled by Plugin
* Simplify PipelineData::print
Signed-off-by: nibon7 <nibon7@163.com>
* make write_all_and_flush to be associated function
Signed-off-by: nibon7 <nibon7@163.com>
* Updated nu_with_plugins to handle new nushell
- Now it requires the plugin format and name to be passed in, because
we can't really guess the format
- It calls `register` with format and plugin path
- It creates a temporary folder and in it an empty temporary plugin.nu
so that the tests don't conflict with each other or with local copy of
plugin.nu
- Instead of passing the commands via stdin it passes them via the new
--commands command line argument
* Rename path to command for clarity
* Enable core_inc tests
Remove deprecated inc feature and replace with new plugin feature
* Update core_inc tests for new nu_with_plugins syntax
* Rework core_inc::can_only_apply_one
The new inc plugin doesn't error if passed more than one but instead
chooses the highest increment
* Gate all plugin tests behind feature = "plugin" instead of one by one
* Remove format!-like behavior from nu_with_plugins
nu_with_plugins had format!-like behavior where it would allow calls
such as this:
```rs
nu_with_plugins!(
cwd: "dir/",
"open {} | get {}",
"Cargo.toml",
"package.version"
)
```
And although nifty it seems to have never been used before and the same
can be achieved with a format! like so:
```rs
nu_with_plugins!(
cwd: "dir/",
format!("open {} | get {}", "Cargo.toml", "package.version")
)
```
So I am removing it to keep the complexity of the macro in check
* Add multi-plugin support to nu_with_plugins
Useful for testing interactions between plugins
* Alternative 1: run `cargo build` inside of tests
* Handle Windows by canonicalizing paths and add .exe
One VM install later and lots of learning about how command line
arguments work and here we are
* introduce external command runs to failed error, and implement semicolon relative logic
* ignore test due to semicolon works
* not raise ShellError for external commands
* update comment
* add relative test in for windows
* fix type-o
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* nu-table: Refactoring
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* nu-table: consider space for single `...` column not enough space
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* nu-table: Fix header style
It did appeared again after my small change...
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* nu-table: Add a empty header style test
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Fix 5978
* Add unit test for explicit glob
* Format
* Expansion vs none-expansion
* Add unit tests
* Fix format..
* Add debug message for MacOS
* Fix UT on Mac and add tests for windows
* cleanup
* clean up windows test
* single and double qoutes tests
* format...
* Save format.
* Add log to failed windows unit tests
* try `touch` a file
* PS or CMD
* roll back some change
* format
* Remove log and test case
* Add unit test comments
* Fix
Co-authored-by: Frank <v-frankz@microsoft.com>
* Add plugin CLI argument
While working on supporting CustomValues in Plugins I stumbled upon the
test utilities defined in [nu-test-support][nu-test-support]
and thought these will come in handy, but they end up being outdated.
They haven't been used or since engine-q's was merged, so they are
currently using the old way engine-q handled plugins, where it would
just look into a specific folder for plugins and call them without
signatures or registration. While fixing that I realized that there is
currently no way to tell nushell to load and save signatures into a
specific path, and so those integration tests could end up potentially
conflicting with each other and with the local plugins the person
running them is using.
So this adds a new CLI argument to specify where to store and load
plugin signatures from
I am not super sure of the way I implemented this, mainly
I was a bit confused about the distinction between
[src/config_files.rs][src/config_files.rs] and
[crates/nu-cli/src/config_files.rs][crates/nu-cli/src/config_files.rs].
Should I be moving the plugin loading function from the `nu-cli` one to
the root one?
[nu-test-support]: 9d0be7d96f/crates/nu-test-support/src/macros.rs (L106)
[src/config_files.rs]: 9d0be7d96f/src/config_files.rs
[crates/nu-cli/src/config_files.rs]: 9d0be7d96f/crates/nu-cli/src/config_files.rs
* Gate new CLI option behind plugin feature
* Rename option to plugin-config
* Remove comment
* Split delta and environment merging
* Move table mode to a more logical place
* Cleanup
* Merge environment after reading default_env.nu
* Fmt
* allow for easy config reset with a single command
* add slightly better help, rebase
* add option to make no backups, make all backups unique through including UNIX Epoch Time in the filename
* time is now formatted in rfc3339
* time is now formatted in a window-friendly format
* Fix panic when opening symlink which points to an inaccessible directory
Fixes#6027
Signed-off-by: nibon7 <nibon7@163.com>
* tweak words
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Allow keeping selected env from removed overlay
* Remove some duplicate code
* Change --keep-all back to --keep-custom
Because, apparently, you cannot have a named flag called --keep-all,
otherwise tests fail?
* Fix missing line and wrong test value
* add bytes collect
* index_of support searching from end
* add bytes remove
* make bytes replace work better for empty pattern
* add bytes build
* remove comment
* tweak words
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* (WIP) Initial messy support for hooks as strings
* Cleanup after running condition & hook code
Also, remove prints
* Move env hooks eval into its own function
* Add env change hooks to simulator
* Fix hooks simulator not running env hooks properly
* Add missing hooks test file
* Expand hooks tests
* Add blocks as env hooks; Preserve hook environment
* Add full eval to pre prompt/exec hooks; Fix panic
* Rename env change hook back to orig. name
* Print err on test failure; Add list of hooks test
* Consolidate condition block; Fix panic; Misc
* CHange test to use real file
* Remove unused stuff
* Fix potential panics; Clean up errors
* Remove commented unused code
* Clippy: Fix extra references
* Add back support for old-style hooks
* Reorder functions; Fmt
* Fix test on Windows
* Add more test cases; Simplify some error reporting
* Add more tests for setting correct before/after
* Move pre_prompt hook to the beginning
Since we don't have a prompt or blocking on user input, all hooks just
follow after each other.
* Avoid extending the directory without globs in `nu_engine::glob_from`
* avoid joining a `*` to the directory without globs
* remove checks on directory permission and whether it is empty
The previous implemention of `nu_engine::glob_from` will extend the
given directory even if it containes no glob pattern. This commit
overcomes lack of consistency with the function `nu_glob::glob`.
* Add flag -D to ls, to list the directory itself instead of its contents
* add --directory (-d) flag to ls
* correct the difference between the given path and the cwd
* set default path to `.` instead of `./*` when --directory (-d) flag is true
* add comments
* add an example
* add tests
* fmt
* Add all flag
* Make all and moduel flags as mutually exclusive
* Fix new test
* format code...
* tweak words
* another tweak
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Return error when external command core dumped
Fixes#5903
Signed-off-by: nibon7 <nibon7@163.com>
* Use signal-hook to get signal name
Signed-off-by: nibon7 <nibon7@163.com>
* Fix comment
Signed-off-by: nibon7 <nibon7@163.com>
* ensure `required` positionals show up as `required` when `help`
* moves it to the older format
* standardises across optional and required parameters
* adds `capture-errors` flag for `do`
* adds `get-type` core command to get type
* fmt
* add tests in example
* fmt
* fix tests
* manually revert previous changes related to `get-type`
* adds method to check for error name using `into string`
* fix clippy
For instance,
```
echo 'abcdefghijklmnopqrstuvwxyz' | hash sha256 --binary
```
Will returns the hash as a binary value instead of a hexadecimaly encoded string.
* feat: deprecate `hash base64` command
* feat: extend `decode` and `encode` command families
This commit
- Adds `encode` command family
- Backports `hash base64` features to `encode base64` and `decode base64` subcommands.
- Refactors code a bit and extends tests for encodings
- `decode base64` returns a binary `Value` (that may be decoded into a string using `decode` command)
* feat: add `--binary(-b)` flag to `decode base64`
Default output type is now string, but binary can be requested using this new flag.
* fixes the issue for 'open' and other commands that explicitly use `SyntaxShape::Filepath`
* fixes for `rm` and similar commands
* fixes for `ls`: potentially breaking?
* fmt
* a curious fix to the test
* a curious fix to the test, except for Windows this time
* fixes Windows tests failing
* resolves it by putting an explicit check for `ls`
* reverts unnecessary test changes; fmt
* changes the order of completion operations
