# Description
Fixes: #13460
The issue is caused by `try_exists` method on path, it will return
`Err(NotADirectory)` if user tried to check for a path under a regular
file.
To fix it, I think it's ok to use `exists` rather than `try_exists`,
although
[Path::exists()](https://doc.rust-lang.org/std/path/struct.Path.html#method.exists)
only checks whether or not a path was both found and readable. I think
it's ok, and we can add this information under `extra_description`.
# User-Facing Changes
The following code will no longer raise error:
```
touch a; 'a/b' | path exists
```
# Tests + Formatting
Added 1 test.
# Description
According to emacs doc, I think `ctrl-k` should map to `cuttolineend`.
# User-Facing Changes
`ctrl-k` will no longer cut to the end of buffer
# Description
Add `metadata access`, which allows accessing/inspecting the metadata of
a stream in a closure.
```nu
ls | metadata access {|meta|
...
}
```
- The metadata is provided as an argument to the closure, identical to
the record obtained with `metadata` command.
- `metadata access` passes its input stream into the closure as it is.
- Within the closure, both the metadata and the stream are available.
The closure may modify, collect or pass the stream as it is.
# Motivation
- Without this command, nu code can't act on metadata without losing the
stream, use cases requiring both the stream and metadata must be
implemented either as a built-in or a plugin.
- This command allows users to enhance presentation of data, similar to
`table` coloring the output of `ls`.
# Description
This PR:
- Removes the lazy_command, expr_command macros and migrates the
commands that were utilizing them.
- Removes the custom logic in DataFrameValues::is_equals to use the
polars DataFrame version of PartialEq
- Adds examples to commands that previously did not have examples or had
inadequate ones.
NOTE: A lot of examples now have a `polars sort` at the end. This is
needed due to the comparison in the result. The new polars version of
equals cares about the ordering. I removed the custom equals logic as it
causes comparisons to lock up when comparing dataframes that contain a
row that contains a list. I discovered this issue when adding examples
to `polars implode`
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.24.4 to
1.24.5.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.24.5</h2>
<h2>[1.24.5] - 2024-09-04</h2>
<h3>Features</h3>
<ul>
<li><em>(action)</em> Support windows</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.24.5] - 2024-09-04</h2>
<h3>Features</h3>
<ul>
<li><em>(action)</em> Support windows</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="945d407a5f"><code>945d407</code></a>
chore: Release</li>
<li><a
href="e972e95d22"><code>e972e95</code></a>
docs: Update changelog</li>
<li><a
href="fcfade456a"><code>fcfade4</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1095">#1095</a>
from zyf722/actions-windows</li>
<li><a
href="264f549c13"><code>264f549</code></a>
feat(action): Add Windows support to actions</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.24.4...v1.24.5">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [hustcer/setup-nu](https://github.com/hustcer/setup-nu) from 3.12
to 3.13.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/hustcer/setup-nu/releases">hustcer/setup-nu's
releases</a>.</em></p>
<blockquote>
<h2>v3.13</h2>
<h2>[3.13] - 2024-09-07</h2>
<h3>Features</h3>
<ul>
<li>Add <code>aarch64_linux</code> and <code>aarch64_windows</code>
runners support</li>
</ul>
<h3>Deps</h3>
<ul>
<li>Upgrade
<code>@octokit/rest</code>,globby,<code>@biomejs/biome</code>,lefthook,
etc.</li>
<li>Upgrade semver,lefthook,<code>@octokit/rest</code> and
@typescript-eslint/*</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/hustcer/setup-nu/compare/v3.12...v3.13">https://github.com/hustcer/setup-nu/compare/v3.12...v3.13</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/hustcer/setup-nu/blob/main/CHANGELOG.md">hustcer/setup-nu's
changelog</a>.</em></p>
<blockquote>
<h2>[3.13] - 2024-09-07</h2>
<h3>Features</h3>
<ul>
<li>Add <code>aarch64_linux</code> and <code>aarch64_windows</code>
runners support</li>
</ul>
<h3>Deps</h3>
<ul>
<li>Upgrade
<code>@octokit/rest</code>,globby,<code>@biomejs/biome</code>,lefthook,
etc.</li>
<li>Upgrade semver,lefthook,<code>@octokit/rest</code> and
@typescript-eslint/*</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="5dfe3b1a9e"><code>5dfe3b1</code></a>
Bump to v3.13</li>
<li><a
href="7f30320d51"><code>7f30320</code></a>
deps: Upgrade <code>@octokit/rest</code>, lefthook and
@typescript-eslint/*</li>
<li><a
href="aed3675fdb"><code>aed3675</code></a>
deps: Upgrade semver,lefthook,<code>@octokit/rest</code> and
@typescript-eslint/*</li>
<li><a
href="cb4476b15e"><code>cb4476b</code></a>
deps: Upgrade
<code>@octokit/rest</code>,globby,<code>@biomejs/biome</code>,lefthook
and <a
href="https://github.com/typescript-es"><code>@typescript-es</code></a>...</li>
<li><a
href="25c9361cd1"><code>25c9361</code></a>
feat: Add aarch64_linux and aarch64_windows runners support</li>
<li>See full diff in <a
href="https://github.com/hustcer/setup-nu/compare/v3.12...v3.13">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.33.0 to
0.34.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/baoyachi/shadow-rs/releases">shadow-rs's
releases</a>.</em></p>
<blockquote>
<h2>v0.34.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Make using the CARGO_METADATA object simpler by <a
href="https://github.com/baoyachi"><code>@baoyachi</code></a> in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/181">baoyachi/shadow-rs#181</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.33.0...v0.34.0">https://github.com/baoyachi/shadow-rs/compare/v0.33.0...v0.34.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="ccb09f154b"><code>ccb09f1</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/181">#181</a>
from baoyachi/issue/179</li>
<li><a
href="65c56630da"><code>65c5663</code></a>
fix cargo clippy check</li>
<li><a
href="998d000023"><code>998d000</code></a>
Make using the CARGO_METADATA object simpler</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.33.0...v0.34.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This fixes a couple of remaining differences between the IR evaluator's
handling of env vars and the AST evaluator's handling of env vars.
Blocker for #13718 (this is why those tests failed)
# User-Facing Changes
1. Handles checking overlays for hidden env vars properly, when getting
an env var from IR instruction
2. Updates config properly when doing `redirect_env()` (these probably
shouldn't be separate functions anyway, though, they're basically the
same. I did this because I intended to remove one, but now it's just
like that)
# Tests + Formatting
The `nu_repl` testbin now handles `NU_USE_IR` properly, so these tests
now work as expected.
# After Submitting
- [ ] check in on #13718 again
# Description
Fixes a bug in the IR for `try` to match that of the regular evaluator
(continuing from #13515):
```nushell
# without IR:
try { ^false } catch { 'caught' } # == 'caught'
# with IR:
try { ^false } catch { 'caught' } # error, non-zero exit code
```
In this PR, both now evaluate to `caught`. For the implementation, I had
to add another instruction, and feel free to suggest better
alternatives. In the future, it might be possible to get rid of this
extra instruction.
# User-Facing Changes
Bug fix, `try { ^false } catch { 'caught' }` now works in IR.
# Description
This is my first PR, and I'm looking for feedback to help me improve!
This PR fixes#13380 by expanding the path prior to parsing it.
Also I've removed some unused code in
[completion_common.rs](84e92bb02c/crates/nu-cli/src/completions/completion_common.rs
)
# User-Facing Changes
Auto-completion for "cd .../" now works by expanding to "cd ../../".
# Tests + Formatting
Formatted and added 2 tests for triple dots in the middle of a path and
at the end.
Also added a test for the expand_ndots() function.
# Description
This PR bumps our rust version from 1.78 to 1.79.0 due to the 1.81.0
release.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously there were no examples or explanations that you can use '*'
to select all columns. Updated description and added a new example.
# Description
This PR makes it so that non-zero exit codes and termination by signal
are treated as a normal `ShellError`. Currently, these are silent
errors. That is, if an external command fails, then it's code block is
aborted, but the parent block can sometimes continue execution. E.g.,
see #8569 and this example:
```nushell
[1 2] | each { ^false }
```
Before this would give:
```
╭───┬──╮
│ 0 │ │
│ 1 │ │
╰───┴──╯
```
Now, this shows an error:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:2]
1 │ [1 2] | each { ^false }
· ┬
· ╰── source value
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #1:1:17]
1 │ [1 2] | each { ^false }
· ──┬──
· ╰── exited with code 1
╰────
```
This PR fixes#12874, fixes#5960, fixes#10856, and fixes#5347. This
PR also partially addresses #10633 and #10624 (only the last command of
a pipeline is currently checked). It looks like #8569 is already fixed,
but this PR will make sure it is definitely fixed (fixes#8569).
# User-Facing Changes
- Non-zero exit codes and termination by signal now cause an error to be
thrown.
- The error record value passed to a `catch` block may now have an
`exit_code` column containing the integer exit code if the error was due
to an external command.
- Adds new config values, `display_errors.exit_code` and
`display_errors.termination_signal`, which determine whether an error
message should be printed in the respective error cases. For
non-interactive sessions, these are set to `true`, and for interactive
sessions `display_errors.exit_code` is false (via the default config).
# Tests
Added a few tests.
# After Submitting
- Update docs and book.
- Future work:
- Error if other external commands besides the last in a pipeline exit
with a non-zero exit code. Then, deprecate `do -c` since this will be
the default behavior everywhere.
- Add a better mechanism for exit codes and deprecate
`$env.LAST_EXIT_CODE` (it's buggy).
# Description
I swear, I only did `cargo update -p reedline`. However, I feel down the
dependency rabbit hole. We need to get nushell on crossterm 28.1 and
ratatui on 28.1 but we can't because tabled uses papergrid which uses an
older version of unicode-width that can't be upgraded apparently. Ugh.
I've opened an issue at the tabled repo about this.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
After merging #13788, I get an error message which says that
`use_grid_icons` is invalid.
I think it's good to report the specific error, and guide user to delete
it.
# Description
The content-type was not being handled appropriately when sending
requests with a string value.
# User-Facing Changes
- Passing a string value through a pipeline with a content-type set as
metadata is handled correctly
- Passing a string value as a parameter with a content-type set as a
flag is handled correctly.
# Description
After looking at #13751 I noticed that the config setting
`use_grid_icons` seems out of place. So, I removed it from the config
and made it a parameter to the `grid` command.
# Description
This PR fixes#13732. However, I don't think it's a proper fix.
1. It doesn't really show what the problem is.
2. It kind of side-steps the error entirely.
I do think the change in span.rs may be valid because I don't think
span.end should ever be 0. In the example in 13732 the span end was
always 0 and so that made contains_span() return true, which seems like
a false positive.
The `checked_sub()` in ide.rs kind of just stops it from failing
outloud.
I'll leave it to smarter folks than me to land this if they think it's
worthy.
Discovered by @cptpiepmatz that #13749 broke the standalone check for
`nu-protocol`
Explicit use of the feature as workspace root also disables all features
for `serde`. Alternatively we could reconsider this there.
# Description
The existing code uses exact matches on content type. This can caused
things like "application/json; charset=utf-8" that contain a charset not
using send_json method.
NOTE: The charset portion in the above example would still be ignored as
we rely on serde and the client library to control the encoding, it is
still better to catch the json case.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
In order to be more consistent with the nushell terminology and with
polars expression terminology `polars concatenate` is now `polars
str-join`. `polars str-join` can also be used as expression.
<img width="857" alt="Screenshot 2024-09-04 at 12 41 25"
src="https://github.com/user-attachments/assets/8cc5a0c2-194c-49ec-9fe1-65ec4825414d">
# User-Facing Changes
- `polars concatenate` is now `polars str-join`
- `polars str-join` can be used as an expression
# Description
Allows `polars str-lengths` to be used as an expression:
<img width="826" alt="Screenshot 2024-09-04 at 13 57 45"
src="https://github.com/user-attachments/assets/b74139e0-e8ba-4910-84c2-cf4be4a084b6">
# User-Facing Changes
- `polars str-lengths` can be used as an expression.
- char length is now the default. Use the --bytes flag to get bytes
length.
# Description
Cleans up and refactors the config code using the `IntoValue` macro.
Shoutout to @cptpiepmatz for making the macro!
# User-Facing Changes
Should be none.
# After Submitting
Somehow refactor the reverse transformation.
Closes#13687Closes#13686
# Description
Light refactoring of `send_request `in `client.rs`. In the end there are
more lines but now the logic is more concise and facilitates adding new
conditions in the future. Unit tests ran fine and I tested a few cases
manually.
Cool project btw, I'll be using nushell from now on.
# Description
This PR allows the helper attribute `nu_value(rename = "...")` to be
used on struct fields and enum variants. This allows renaming keys and
variants just like [`#[serde(rename =
"name")]`](https://serde.rs/field-attrs.html#rename). This has no
singular variants for `IntoValue` or `FromValue`, both need to use the
same (but I think this shouldn't be an issue for now).
# User-Facing Changes
Users of the derive macros `IntoValue` and `FromValue` may now use
`#[nu_value(rename = "...")]` to rename single fields, but no already
existing code will break.
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.24.1 to
1.24.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.24.4</h2>
<h2>[1.24.4] - 2024-09-03</h2>
<h3>Fixes</h3>
<ul>
<li>Offer a correction for <code>grather</code></li>
</ul>
<h2>v1.24.3</h2>
<h2>[1.24.3] - 2024-08-30</h2>
<h3>Fixes</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1069">August
2024</a> changes</li>
</ul>
<h2>v1.24.2</h2>
<h2>[1.24.2] - 2024-08-30</h2>
<h3>Performance</h3>
<ul>
<li>Cap unbounded parsing to avoid worst case performance (hit with test
data)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.24.4] - 2024-09-03</h2>
<h3>Fixes</h3>
<ul>
<li>Offer a correction for <code>grather</code></li>
</ul>
<h2>[1.24.3] - 2024-08-30</h2>
<h3>Fixes</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1069">August
2024</a> changes</li>
</ul>
<h2>[1.24.2] - 2024-08-30</h2>
<h3>Performance</h3>
<ul>
<li>Cap unbounded parsing to avoid worst case performance (hit with test
data)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="853bbe8898"><code>853bbe8</code></a>
chore: Release</li>
<li><a
href="b5f56600b2"><code>b5f5660</code></a>
docs: Update changelog</li>
<li><a
href="39f678e520"><code>39f678e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1093">#1093</a>
from kachick/grather-suggest-candidates</li>
<li><a
href="bb6905fdc9"><code>bb6905f</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1092">#1092</a>
from crate-ci/renovate/embarkstudios-cargo-deny-acti...</li>
<li><a
href="786c825f17"><code>786c825</code></a>
fix(dict): Add suggestions for the typo "grather"</li>
<li><a
href="340058181b"><code>3400581</code></a>
chore(deps): Update EmbarkStudios/cargo-deny-action action to v2</li>
<li><a
href="9ad6f5c054"><code>9ad6f5c</code></a>
chore: Release</li>
<li><a
href="12e101ec51"><code>12e101e</code></a>
docs: Update changelog</li>
<li><a
href="8c58591ec4"><code>8c58591</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1091">#1091</a>
from epage/august</li>
<li><a
href="250dcc73e6"><code>250dcc7</code></a>
fix(dict): Aug updates</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.24.1...v1.24.4">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.4.0 to
2.5.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's
changelog</a>.</em></p>
<blockquote>
<h2>2.5.0</h2>
<ul>
<li>Added an <code>insert_before</code> method to <code>IndexMap</code>
and <code>IndexSet</code>, as an
alternative to <code>shift_insert</code> with different behavior on
existing entries.</li>
<li>Added <code>first_entry</code> and <code>last_entry</code> methods
to <code>IndexMap</code>.</li>
<li>Added <code>From</code> implementations between
<code>IndexedEntry</code> and <code>OccupiedEntry</code>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="48ed49017c"><code>48ed490</code></a>
Release 2.5.0</li>
<li><a
href="139d7addfb"><code>139d7ad</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/340">#340</a>
from cuviper/insert-bounds</li>
<li><a
href="1d9b5e3d03"><code>1d9b5e3</code></a>
Add doc examples for <code>insert_before</code> and
<code>shift_insert</code></li>
<li><a
href="8ca01b0df7"><code>8ca01b0</code></a>
Use <code>insert_before</code> for "new" entries in
<code>insert_sorted</code></li>
<li><a
href="7224def010"><code>7224def</code></a>
Add <code>insert_before</code> as an alternate to
<code>shift_insert</code></li>
<li><a
href="0247a1555d"><code>0247a15</code></a>
Document and assert index bounds in <code>shift_insert</code></li>
<li><a
href="922c6ad1af"><code>922c6ad</code></a>
Update the CI badge</li>
<li><a
href="e482e1768a"><code>e482e17</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/342">#342</a>
from cuviper/btree-like</li>
<li><a
href="b63e4a1556"><code>b63e4a1</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/341">#341</a>
from cuviper/from-entry</li>
<li><a
href="264e5b7304"><code>264e5b7</code></a>
Add doc aliases like <code>BTreeMap</code>/<code>BTreeSet</code></li>
<li>Additional commits viewable in <a
href="https://github.com/indexmap-rs/indexmap/compare/2.4.0...2.5.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This change allows one to see the version of their plugin file without
trying to register it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This pr addresses the comment:
https://github.com/nushell/nushell/issues/11791#issuecomment-2308384155
It's caused by if the last row have a very different format to the first
row, the value of `end_char` will exceed the `line_char_boundaries`.
Adding a guard for it should avoid such panic.
# User-Facing Changes
The following code should no longer panic:
```shell
"nu_plugin_highlight = '1.2.2+0.97.1' # A nushell plugin for syntax highlighting
trace_nu_plugin = '0.3.1' # A wrapper to trace Nu plugins
nu_plugin_bash_env = '0.13.0' # Nu plugin bash-env
nu_plugin_from_sse = '0.4.0' # Nushell plugin to convert a HTTP server sent event stream to structured data
... and 90 crates more (use --limit N to see more)" | detect columns -n --guess
```
# Tests + Formatting
Added 1 test.
# Description
This changes the behavior of `tee` to be more transparent when given a
value that isn't a list or range. Previously, anything that wasn't a
byte stream would converted to a list stream using the iterator
implementation, which led to some surprising results. Instead, now, if
the value is a string or binary, it will be treated the same way a byte
stream is, and the output of `tee` is a byte stream instead of the
original value. This is done so that we can synchronize with the other
thread on collect, and potentially capture any error produced by the
closure.
For values that can't be converted to streams, the closure is just run
with a clone of the value instead on another thread. Because we can't
wait for the other thread, there is no way to send an error back to the
original thread, so instead it's just written to stderr using
`report_error_new()`.
There are a couple of follow up edge cases I see where byte streams
aren't necessarily treated exactly the same way strings are, but this
should mostly be a good experience.
Fixes#13489.
# User-Facing Changes
Breaking change.
- `tee` now outputs and sends string/binary stream for string/binary
input.
- `tee` now outputs and sends the original value for any other input
other than lists/ranges.
# Tests + Formatting
Added for new behavior.
# After Submitting
- [ ] release notes: breaking change, command change
removing the `std` feature as well would drop some dependencies tied to
`rust_decimal` from the `Cargo.lock` but unclear to me what the actual
impact on compile times is.
We may want to consider dropping the `byte-unit` dependency altogether
as we have a significant fraction of our own logic to support the byte
units with 1024 and 1000 prefixes. Not sure which fraction is covered by
us or the dependency.
# Description
Implements `IntoValue` for `&str` and `DateTime` as well as other
nushell types like `Record` and `Closure`. Also allows `HashMap`s with
keys besides `String` to implement `IntoValue`.
# Description
This changes the serialization of custom values within the plugin
protocol to use MessagePack instead of bincode, removing the dependency
on bincode entirely.
Bincode does not seem to be very maintained anymore, and the externally
tagged enum representation doesn't seem to always work now even though
it should. Since we use MessagePack already anyway for the plugin
protocol, this seems like an obvious choice. This uses the unnamed
variant of the serialization rather than the named variant, which is
what the plugin protocol in general uses. The unnamed variant does not
include field names, which aren't really required here, so this should
give us something that's more or less as efficient as bincode is.
Should fix#13743.
# User-Facing Changes
- Will need to recompile plugins (but always do anyway)
- Doesn't technically break the plugin protocol (custom value data is a
black box / plugin implementation specific), but breaks compatibility
between `nu-plugin-engine` and `nu-plugin` so they do need to both be
updated to match.
# Tests + Formatting
All tests pass.
# After Submitting
- [ ] release notes
# Description
Remove the `#[cfg_attr(tarpaulin, ignore)]` code coverage attributes to
get rid warnings when compiling plugins with a more recent rust version
than nushell.
# Description
Adds the ability for `polars replace` and `polars replace-all` to work
as expressions.
# User-Facing Changes
- `polars replace` can be used with polars expressions
- `polars replace-all` can be used with polars expressions
# Description
`cargo` somewhat recently gained the capability to store `lints`
settings for the crate and workspace, that can override the defaults
from `rustc` and `clippy` lints. This means we can enforce some lints
without having to actively pass them to clippy via `cargo clippy -- -W
...`. So users just forking the repo have an easier time to follow
similar requirements like our CI.
## Limitation
An exception that remains is that those lints apply to both the primary
code base and the tests. Thus we can't include e.g. `unwrap_used`
without generating noise in the tests. Here the setup in the CI remains
the most helpful.
## Included lints
- Add `clippy::unchecked_duration_subtraction` (added by #12549)
# User-Facing Changes
Running `cargo clippy --workspace` should be closer to the CI. This has
benefits for editor configured runs of clippy and saves you from having
to use `toolkit` to be close to CI in more cases.
this PR should close#12168
# Description
Add `split cell-path`, inverse of `into cell-path`.
# User-Facing Changes
Currently there is no way to make use of cell-path values as a user,
other than passing them to builtin commands. This PR makes more use
cases possible.
