1.88.0 was released today, clippy now lints (machine-applicable)
against:
- format strings with empty braces that could be inlined
- easy win
- `manual_abs_diff`
- returning of a stored result of the last expression.
- this can be somewhat contentious but touched only a few places
# Description
Added `debug -v` in case the default parameter is a string so that it
will be not be printed literally:
- Before
```nu
--char: <string> (default: )
```
```nu
--char: <string> (default:
)
```
```nu
--char: <string> (default: abc)
```
- After
```nu
--char: <string> (default: " ")
```
```nu
--char: <string> (default: "\n")
```
```nu
--char: <string> (default: "abc")
```
Other types like `int` remain unaffected.
# User-Facing Changes
# Tests + Formatting
# After Submitting
- fixes#16011
# Description
`Display` implementation for `f64` omits the decimal part for round
numbers, and by using it we did the same.
This affected:
- conversions to delimited formats: `csv`, `tsv`
- textual formats: `html`, `md`, `text`
- pretty printed `json` (`--raw` was unaffected)
- how single float values are displayed in the REPL
> [!TIP]
> This PR fixes our existing json pretty printing implementation.
> We can likely switch to using serde_json's impl using its
PrettyFormatter which allows arbitrary indent strings.
# User-Facing Changes
- Round trips through `csv`, `tsv`, and `json` preserve the type of
round floats.
- It's always clear whether a number is an integer or a float in the
REPL
```nushell
4 / 2
# => 2 # before: is this an int or a float?
4 / 2
# => 2.0 # after: clearly a float
```
# Tests + Formatting
Adjusted tests for the new behavior.
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
# Description
There was no hint as to what datetime escape sequences are supported,
previously. Looked into the source code to figure this out, which is not
great ux hehehe
# User-Facing Changes
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This simply updates the `which` dependency from 7.0.3 to 8.0.0, with no
code changes. See
https://github.com/harryfei/which-rs/releases/tag/8.0.0 for release
notes.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tested with `cargo test --workspace` and `cargo run -- -c "use
toolkit.nu; toolkit test stdlib"`.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
- fixes#14946
- related #15227
- > [When I run nushell with the hook, the hook itself works as
expected, correctly detects system theme and changes
$env.config.color_config. However, it seems that the change to
$env.config.color_config is not propagated outside the
hook](https://github.com/nushell/nushell/issues/15227#issuecomment-2695287318)
- > [But it suffers from the same problem - modifications made to the
$env.config variable are not visible outside of the hook (which I'm not
sure if is correct behavior or
bug).](https://github.com/nushell/nushell/issues/15227#issuecomment-2695741542)
- > [I also managed to get it working with def --env, but there was one
more issue, I had to change $env.config.hooks.pre_prompt = [{
switch_theme }] into $env.config.hooks.pre_execution = ([ switch_theme
])](https://github.com/nushell/nushell/issues/15227#issuecomment-2704537565)
(having to use a string hook rather than a closure)
- related #11082
> Might be possible solve or at least mitigate using a similar method
# Description
Recently realized that changes made to `$env.config` in closure hooks
don't take effect whereas string hooks don't have that problem.
After some investigation:
- Hooks' environment was not preserved prior to #5982 >
[2309601](2309601dd4/crates/nu-cli/src/repl.rs (L823-L840))
- `redirect_env` which properly updates the config state was implemented
afterwards in #6355 >
[ea8b0e8](ea8b0e8a1d/crates/nu-engine/src/eval.rs (L174-L190))
Simply using `nu_engine::eval::redirect_env` for the environment update
was enough to fix the issue.
# User-Facing Changes
Hooks can update `$env.config` and the configuration change will work as
expected.
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
# Description
Adds formatting for code in backticks in `help` output. If it's possible
to highlight syntax (`nu-highlight` is available and there's no invalid
syntax) then it's highlighted. If the syntax is invalid or not an
internal command, then it's dimmed and italicized. like some of the
output from `std/help`. If `use_ansi_coloring` is `false`, then we leave
the backticks alone. Here's a couple examples:
(note on this one: usually we can highlight partial commands, like `get`
in the `select` help page which is invalid according to `nu-check` but
is still properly highlighted, however `where` is special cased and just
typing `where` with no row condition is highlighted with the garbage
style so `where` alone isn't highlighted here)
here's the `where` page with `$env.config.use_ansi_coloring = false`:
Technically, some syntax is valid but isn't really "Nushell code". For
example, the `select` help page has a line that says "Select just the
\`name\` column". If you just type `name` in the REPL, Nushell treats it
as an external command, but for the purposes of highlighted we actually
want this to fall back to the generic dimmed/italic style. This is
accomplished by temporarily setting the `shape_external` and
`shape_externalarg` color config to the generic/fallback style, and then
restoring the color config after highlighting. This is a bit hack-ish
but it seems to work pretty well.
# User-Facing Changes
- `help` command now supports code backtick formatting. Code will be
highlighted using `nu-highlight` if possible, otherwise it will fall
back to a generic format.
- Adds `--reject-garbage` flag to `nu-highlight` which will return an
error on invalid syntax (which would otherwise be highlighted with
`$env.config.color_config.shape_garbage`)
# Tests + Formatting
Added tests for the regex. I don't think tests for the actual
highlighting are very necessary since the failure mode is graceful and
it would be difficult to meaningfully test.
# After Submitting
N/A
---------
Co-authored-by: Piepmatz <git+github@cptpiepmatz.de>
It was brought up in the Discord that `default { open -r foo.txt }`
results in a string instead of streaming output. This changes `default`
such that closures now stream when given simple input.
# Description
If the value isn't expected to be cached, `default` just runs the
closure without caching the value, which allows its output to be
streamed
# User-Facing Changes
# Tests + Formatting
👍
# After Submitting
Closes: https://github.com/nushell/nushell/issues/13127
# Description
This PR updates the behaviour of `start` in the following ways:
Instead of joining the path with CWD, we expand the path.
Behaviour on `origin/main`:
```
nushell> ls ~/nushell-test
test.txt
nushell> start ~/nushell-test/test.txt
Error: × Cannot find file or URL: ~/nushell-test/test.txt
...
help: Ensure the path or URL is correct and try again.
```
Behaviour in this PR:
```
nushell> ls ~/nushell-test
test.txt
nushell> start ~/nushell-test/test.txt
<opens text editor>
```
# User-Facing Changes
`start` now treats the input path differently. This is a breaking
change, I believe. Although I'm not sure how breaking it would be in the
perspective of the user.
# Tests + Formatting
I've manually tested this. The test suite for `start` is broken. And
even if I fix it, I'm not sure how to test it.
I'll need to override the default command list for `start` in the
sandbox for testing.
# After Submitting
I don't think the documentation needs to be updated.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds the `only` command to `std-rfc/iter`, which is a command I
wrote a while ago that I've found so useful that I think it could have a
place in the standard library. It acts similarly to `get 0`, but ensures
that the value actually exists, and there aren't additional values. I
find this most useful when chained with `where`, when you want to be
certain that no additional elements are accidentally selected when you
only mean to get a single element.
I'll copy the help page here for additional explanation:
> Get the only element of a list or table, ensuring it exists and there
are no extra elements.
>
> Similar to `first` with no arguments, but errors if there are no
additional
> items when there should only be one item. This can help avoid issues
when more
> than one row than expected matches some criteria.
>
> This command is useful when chained with `where` to ensure that only
one row
> meets the given condition.
>
> If a cell path is provided as an argument, it will be accessed after
the first
> element. For example, `only foo` is roughly equivalent to `get 0.foo`,
with
> the guarantee that there are no additional elements.
>
> Note that this command currently collects streams.
> Examples:
>
> Get the only item in a list, ensuring it exists and there's no
additional items
> ```nushell
> [5] | only
> # => 5
> ```
>
> Get the `name` column of the only row in a table
> ```nushell
> [{name: foo, id: 5}] | only name
> # => foo
> ```
>
> Get the modification time of the file named foo.txt
> ```nushell
> ls | where name == "foo.txt" | only modified
> ```
Here's some additional examples showing the errors:
Most of the time I chain this with a simple `where`, but here's a couple
other real world examples of how I've used this:
[With `parse`, which outputs a
table](https://git.ikl.sh/132ikl/dotfiles/src/branch/main/.scripts/manage-nu#L53):
```nushell
let commit = $selection | parse "{start}.g{commit}-{end}" | only commit
```
[Ensuring that only one row in a table has a name that ends with a
certain
suffix](https://git.ikl.sh/132ikl/dotfiles/src/branch/main/.scripts/btconnect):
```nushell
$devices | where ($chosen_name ends-with $it.name) | only
```
Unfortunately to get these nice errors I had to collect the stream (and
I think the errors are more useful for this). This should be to be
mitigated with (something like) #16014.
Putting this in `std/iter` might be pushing it, but it seems *just*
close enough that I can't really justify putting it in a different/new
module.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* Adds the `only` command to `std-rfc/iter`, which can be used to ensure
that a table or list only has a single element.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a few tests for `only` including error cases
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
---------
Co-authored-by: Bahex <Bahex@users.noreply.github.com>
# Description
I wanted to know if `version` is a const command and thought that it
would be in the "This command" section but it wasn't, so I added it.
```
→ help version
Display Nu version, and its build configuration.
Category: core
This command:
Creates scope | ❌
Is built-in | ✅
Is const | ✅
Is a subcommand | ❌
Is a part of a plugin | ❌
Is a custom command | ❌
Is a keyword | ❌
```
# Description
Adding to #15962, I have realized that there are windows gui programs
like `prismlauncher` or `firefox` that do accept the `--help` flag but
won't output on the terminal unless `collect`ed, so now it collects the
output on windows.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
## ✅ Improve `drop nth` command to support spreadable arguments
### Summary
This PR updates the `drop nth` command to support **spreadable
arguments** in a way consistent with other commands like `which`,
enabling:
```nu
[1 2 3 4 5] | drop nth 0 2 4
```
### What's Changed
* **Previously**: only a single index or a single range was accepted as
the first argument, with rest arguments ignored for ranges.
* **Now**: the command accepts any combination of:
* Integers: to drop individual rows
* Ranges: to drop slices of rows
* Unbounded ranges: like `3..`, to drop from index onward
Example:
```nu
[one two three four five six] | drop nth 0 2 4..5
# drops "one", "three", "five", and "six"
```
### Test
Manual Test:
### Notes
As per feedback:
* We **only collect the list of indices** to drop, not the input stream.
* Unbounded ranges are handled by terminating the stream early.
Let me know if you'd like further changes
---------
Co-authored-by: Kumar Ujjawal <kumar.ujjawal@greenpista.com>
Co-authored-by: Kumar Ujjawal <kumarujjawal@Kumars-MacBook-Air.local>
Fixes the default behavior of #15790
# Description
As for the mentioned carapace version: `cat ~"/Downloads/Obsidian
Vault/"`, the problem lies in the unexpanded home directory `~`. Either
we encourage users to manually expand that in
`$env.config.completions.external.completer` or open an issue on the
carapace project.
# User-Facing Changes
bug fix
# Tests + Formatting
Adjusted
# After Submitting
# Description
Add 'double' table mode, that is similar to `compact_double` but with
left and right border lines. This is similar to how there exist both
`single` and `compact`, but there is no `double` to compliment
`compact_double`. Printing `[ { a: 1, b: 11 }, { a: 2, b:12 } ]` looks
like this:
```
╔═══╦═══╦════╗
║ # ║ a ║ b ║
╠═══╬═══╬════╣
║ 0 ║ 1 ║ 11 ║
║ 1 ║ 2 ║ 12 ║
╚═══╩═══╩════╝
```
The implementation is mostly a one-to-one of #15672 and #15681.
# User-Facing Changes
New value `double` to set as `$env.config.table.mode`.
# Tests + Formatting
Tests are added following the example of adding 'single' mode.
# After Submitting
# Description
fixes#16010
When `$env.LS_COLORS = 'fi=0' and `$env.config.color_config.string =
'red'` were set, regular files without file extensions would be colored
red. Now they're colored based on the LS_COLORS definition which, in
this case, means use default colors.
This is done by checking if a style was applied from ls_colors and if
none was applied, create a default nu_ansi_term style with
'Color::Default' for foreground and background.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Bahex <Bahex@users.noreply.github.com>
# Description
Use hashset for existence checking.
Still needs a vector collection to keep the column order for tables.
# User-Facing Changes
Should be None
# Description
I have just discovered the `std/help` command and that it can use `man`
or other programs for externals. Coming from windows, I don't have `man`
so what I want is just to run `external_program --help` in most cases.
This pr adds that option, if you set `$env.NU_HELPER = "--help"`, it
will run the command you passed with `--help` added as the last
argument.
# User-Facing Changes
None
# Tests + Formatting
# After Submitting
Refs #15992
Refs #14457
# Description
This PR introduces a new switch for `query xml`, `--namespaces`,
and thus allows people to use namespace prefixes in the XPath query
to query namespaced XML.
Example:
```nushell
r#'
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:dc="http://purl.org/dc/elements/1.1/"
<dc:title>Black-breasted buzzard_AEB_IMG_7158</dc:title>
</rdf:Description>
</rdf:RDF>
'# | query xml --namespaces {dublincore: "http://purl.org/dc/elements/1.1/"} "//dublincore:title/text()"
```
# User-Facing Changes
New switch added to `query xml`: `query xml --namespaces {....}`
# Tests + Formatting
Pass.
# After Submitting
IIRC the commands docs on the website are automatically generated, so
nothing to do here.
# Description
This PR fixes an oversight where the record key value was not being
colored as the color_config.header color when used with the `table`
command in some circumstances. It respected it with `table -e` but just
not `table`.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- related #15972
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
In #15972 I was very eager removing fowarded features from `nu` to
`nu-cmd-lang`. By accident I also removed `nu-cmd-lang/plugin` too. This
removed `installed_plugins` from `version`. By adding the feature again,
it works again.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Addresses #15997
Adds a `--backtrack` or `-b` named flag to the `parse` command. Allows a
user to specify a max backtrack limit for fancy-regex other than the
default 1,000,000 limit.
Uses a RegexBuilder to add the manual config.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Adds a new named flag `backtrack` to the `parse` command. The flag is
optional and defaults to 1,000,000.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added an example test to the parse command using `--backtrack 1500000`.
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 1.1.1 to
1.2.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/baoyachi/shadow-rs/releases">shadow-rs's
releases</a>.</em></p>
<blockquote>
<h2>v1.2.0</h2>
<h2>What's Changed</h2>
<ul>
<li>add cargo_metadata crate unit test by <a
href="https://github.com/baoyachi"><code>@baoyachi</code></a> in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/231">baoyachi/shadow-rs#231</a></li>
<li>Update cargo_metadata requirement from 0.19.1 to 0.20.0 by <a
href="https://github.com/dependabot"><code>@dependabot</code></a> in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/229">baoyachi/shadow-rs#229</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/baoyachi/shadow-rs/compare/v1.1.1...v1.2.0">https://github.com/baoyachi/shadow-rs/compare/v1.1.1...v1.2.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f0d180ac92"><code>f0d180a</code></a>
Update Cargo.toml</li>
<li><a
href="d106a172ad"><code>d106a17</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/229">#229</a>
from baoyachi/dependabot/cargo/cargo_metadata-0.20.0</li>
<li><a
href="7861af1dd0"><code>7861af1</code></a>
Merge branch 'master' into dependabot/cargo/cargo_metadata-0.20.0</li>
<li><a
href="ab73c01cd1"><code>ab73c01</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/231">#231</a>
from baoyachi/cargo_metadata</li>
<li><a
href="ff1a1dcf27"><code>ff1a1dc</code></a>
fix cargo clippy check</li>
<li><a
href="f59bceaf92"><code>f59bcea</code></a>
add cargo_metadata crate unit test</li>
<li><a
href="5c5b556400"><code>5c5b556</code></a>
Update cargo_metadata requirement from 0.19.1 to 0.20.0</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v1.1.1...v1.2.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Inspired by https://github.com/nushell/nushell/pull/15979 a small Github
actions bot that detects when you make a change to the `nu-protocol`
bits of the config and reminds to consider making a change to the
Nushell version in `doc_config.nu` as well.
# Description
Instead of converting nested structures into strings and
pattern-matching the strings, the `find` command will recursively search
the nested structures for matches.
- fixes#15618
# User-Facing Changes
Text in nested structures will now be highlighted as well.
Error values will always passed on instead of testing them against the
search term
There will be slight changes in match behavior, such as characters that
are part of the string representations of data structures no longer
matching all nested data structures.
- fixes#15975
# Description
This changes the `config nu --doc` output for OSC 7 and 9;9 to represent
better what happens on Windows machines.
This is the current behavior internally:
5be8717fe8/crates/nu-protocol/src/config/shell_integration.rs (L18-L27)
And with this PR the `config nu --doc` better reflects that behavior,
thanks to @fdncred for that idea.
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
---------
Co-authored-by: Bahex <Bahex@users.noreply.github.com>
Follow-up to #15877. That PR was created before 0.105, but merged after
it was released. This PR adjusts the deprecation window from
0.105.0-0.107.0 to 0.106.0-0.108.0
# Description
Currently, `help --find` uses it's own code for looking for the keyword
in a string and highlighting it. This code duplicates a lot of the logic
found in the code of `find`.
This commit re-uses the code of `find` in `help` commands instead.
# User-Facing Changes
This should not affect the behavior of `help`.
# Description
Commands in `std/log` assume the `export-env` has been run and the
relevant environment variables are set.
However, when modules/libraries import `std/log` without defining their
own `export-env` block to run `std/log`'s, logging commands will fail at
runtime.
While it's on the author of the modules to include `export-env { use
std/log [] }` in their modules, this is a very simple issue to solve and
would make the user experience smoother.
# User-Facing Changes
`std/log` work without problem when their env vars are not set.
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
Co-authored-by: 132ikl <132@ikl.sh>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
1. Upgrade Nushell to 0.105.1 for release and nightly workflow
2. Use `hustcer/setup-nu` Action for `windows-11-arm` runner to simplify
the workflow
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Looks fine here:
https://github.com/hustcer/nushell/actions/runs/15657383788/job/44110173668#step:7:1357
- closes#15967
# Description
In 0.105 we introduced the feature `rustls-tls` which is enabled by
default and uses `rustls` instead of `openssl` on linux machines. Since
both `native-tls` and `rustls-tls` cannot be enabled at the same did
this break the `--all-features` flag. To provide an easy alternative, I
introduced the `full` feature here.
# User-Facing Changes
Instead of `cargo install nu --all-features`, you now can do `cargo
install nu --features full`.
# Tests + Formatting
No new tests, this is just a feature collection.
# Description
This PR adds a new `state` key to the output of `gstat` that shows the
current repo state state. Like "Clean", "Merge", "Rebase", etc. The full
list of possible values can be seen
[here](https://docs.rs/git2/latest/git2/enum.RepositoryState.html).
This information is somewhat useful when shown in prompt. Not often
needed, but sometimes really useful.
# User-Facing Changes
New key added to `gstat` output. I don't think it should cause issues to
`gstat` users.
# Tests + Formatting
I couldn't find any tests for `nu_plugin_gstat`.
# After Submitting
I couldn't find any documentation about the output of `gstat`, so I
don't think there is anything to be done here either.
Hello, this PR resolves the second request of the issue
https://github.com/nushell/nushell/issues/10957, which involves using a
default verb based on the request. If a URL is provided, the command
will default to GET, and if data is provided, it will default to POST.
This means that the following pairs of commands are equivalent:
```
http --content-type application/json http://localhost:8000 {a:1}
http post --content-type application/json http://localhost:8000 {a:1}
```
```
http http://localhost:8000 "username"
http post http://localhost:8000 "username"
```
```
http http://localhost:8000
http get http://localhost:8000
```
The `http` command now accepts all flags of the `post` and `get`
commands. It will still display the help message if no subcommand is
provided, and the description has been updated accordingly. The logic in
the `http` command is minimal to delegate error management
responsibilities to the specific `run_get` and `run_post` functions.
# Description
Based on some testing in
[Discord](https://discord.com/channels/601130461678272522/1349836000804995196/1353138803640111135)
we were able to find that `insert` and `delete` happening at the same
time caused problems in the `stor` command. So, I added `conn.is_busy()`
with a sleep to try and avoid that problem.
/cc @NotTheDr01ds @132ikl
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I've noticed that unlike everything else in nushell the output of `ansi
--list` has a column named `short name` instead of `short_name`, so I
changed it. While I was at it, I also added a shortname `rst` to `reset`
since it is often used.
# User-Facing Changes
Changed the column name of `ansi --list` from `short name` to
`short_name`
# Description
I have added a `--no-prefix` flag to the `format number` command to not
include the `0b`, `0x` and `0o` prefixes in the output. Also, I've
changed the order in which the formats are displayed to one I thinks
makes it easier to read, with the upper and lower alternatives next to
each other.
# User-Facing Changes
The formatting of floats previously did not include prefixes while
integers did. Now prefixes are on by default for both, while including
the new flag removes them. Changing the order of the record shouldn't
have any effect on previous code.
# Tests + Formatting
I have added an additional example that test this behavior.
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Fixes the issue of listing allowed datatypes when not being used with
dataframe pipeline input.
Co-authored-by: Jack Wright <jack.wright@nike.com>
# Description
`polars last` will only return one row by default making it consistent
with `polars first`
# User-Facing Changes
- `polars last` will only return one row by default making it consistent
with `polars first`
Co-authored-by: Jack Wright <jack.wright@nike.com>
# Description
This PR adds `like` and `not-like` to the `help operators` command. Now
it at least lists them. I wasn't sure if I should say `=~ or like` so I
just separated them with a comma.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Promotes the clip module from `std-rfc` to `std`. Whether we want to
promote other modules as well (probably?) is up for discussion but I
thought I would get the ball rolling with this one.
# User-Facing Changes
* The `clip` module has been promoted from `std-rfc` to `std`. Using the
`std-rfc` version of clip modules will give a deprecation warning
instructing you to switch to the `std` version.
# Tests + Formatting
N/A
# After Submitting
N/A
# Description
Closes#15848. Currently, we expand unquoted strings to absolute paths
if they are of type `path` or `directory`. This PR makes this no longer
happen. `~`, `.`, and `..+` are still expanded, but a path like
`.../foo/bar/..` will only be turned into `../../foo`, rather than a
full absolute path.
This is mostly so that paths don't get modified before being sent to
known external commands (as in the linked issue). But also, it seems
unnecessary to make all unquoted paths absolute.
After feedback from @132ikl, this PR also makes it so that unquoted
paths are expanded at parse time, so that it matches the runtime
behavior. Previously, `path` expressions were turned into strings
verbatim, while `directory` expressions were treated as not being const.
API change: `nu_path::expansions::expand_path` is now exposed as
`nu_path::expand_path`.
# User-Facing Changes
This has the potential to silently break a lot of scripts. For example,
if someone has a command that expects an already-expanded absolute path,
changes the current working directory, and then passes the path
somewhere, they will now need to use `path expand` to expand the path
themselves before changing the current working directory.
# Tests + Formatting
Just added one test to make sure unquoted `path` arguments aren't made
absolute.
# After Submitting
This is a breaking change, so will need to be mentioned in the release
notes.
# Description
This PR makes the last specified CLI arguments take precedence over the
earlier ones.
Existing command line tools that align with the new behaviour include:
- `neovim`: `nvim -u a.lua -u b.lua` will use `b.lua`
- `ripgrep`: you can have `--smart-case` in your user config but
override it later with `--case-sensitive` or `--ignore-case` (not
exactly the same flag override as the one I'm talking about but I think
it's still a valid example of latter flags taking precedence over the
first ones)
I think a flag defined last can be considered an override. This allows
having a `nu` alias that includes some default config (`alias nu="nu
--config something.nu"`) but being able to override that default config
as if using `nu` normally.
## Example
```sh
nu --config config1.nu --config config2.nu -c '$nu.config-path'
```
The current behavior would print `config1.nu`, and the new one would
print `config2.nu`
## Implementation
Just `.rev()` the iterator to search for arguments starting from the end
of the list. To support that I had to modify the return type of
`named_iter` (I couldn't find a more generic way than
`DoubleEndedIterator`).
# User-Facing Changes
- Users passing repeated flags and relying in nushell using the first
value will experience breakage. Given that right now there's no point in
passing a flag multiple times I guess not many users will be affected
# Tests + Formatting
I added a test that checks the new behavior with `--config` and
`--env-config`. I'm happy to add more cases if needed
# After Submitting
# Description
When attempting to pass a null byte in a commandline argument, Nu
currently fails with:
```
> ^echo (char -i 0)
Error: nu:🐚:io::invalid_input
× I/O error
╰─▶ × Could not spawn foreground child
╭────
1 │ crates/nu-command/src/system/run_external.rs:284:17
· ─────────────────────────┬─────────────────────────
· ╰── Invalid input parameter
╰────
```
This does not explain which input parameter is invalid, or why. Since Nu
does not typically seem to escape null bytes when printing values
containing them, this can make it a bit tricky to track down the
problem.
After this change, it fails with:
```
> ^echo (char -i 0)
Error: nu:🐚:io::invalid_input
× I/O error
╰─▶ × Could not spawn foreground child: nul byte found in provided data
╭────
1 │ crates/nu-command/src/system/run_external.rs:282:17
· ─────────────────────────┬─────────────────────────
· ╰── Invalid input parameter
╰────
```
which is more useful. This could be improved further but this is niche
enough that is probably not necessary.
This might make some other errors unnecessarily verbose but seems like
the better default. I did check that attempting to execute a
non-executable file still has a reasonable error: the error message for
that failure is not affected by this change.
It is still an "internal" error (referencing the Nu code triggering it,
not the user's input) because the `call.head` span available to this
code is for the command, not its arguments. Using it would result in
```
× I/O error
╰─▶ × Could not spawn foreground child: nul byte found in provided data
╭─[entry #1:1:2]
1 │ ^echo (char -i 0)
· ──┬─
· ╰── Invalid input parameter
╰────
```
which is actively misleading because "echo" does not contain the nul
byte.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Haven't tried to write a test yet: it's tricky because the better error
message comes from the Rust stdlib (so a straightforward integration
test checking for the specific message would be brittle)...
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes: #15755
I think it's a good feature, to achieve this, we need to get all hidden
envs(it's defined in `get_hidden_env_vars`, and then restore these envs
back to stack)
# User-Facing Changes
### Before
```nushell
> $env.foo = 'bar'
> overlay new xxx
> hide-env foo
> overlay hide xxx
> $env.foo
Error: nu:🐚:column_not_found
× Cannot find column 'foo'
╭─[entry #21:5:1]
4 │ overlay hide xxx
5 │ $env.foo
· ────┬───┬
· │ ╰── value originates here
· ╰── cannot find column 'foo'
╰────
```
### After
```nushell
> $env.foo = 'bar'
> overlay new xxx
> hide-env foo
> overlay hide xxx
> $env.foo
bar
```
## Note
But it doesn't work if it runs the example code in script:
`nu -c "$env.foo = 'bar'; overlay new xxx; hide-env foo; overlay hide
xxx; $env.foo"`
still raises an error says `foo` doesn't found. That's because if we run
the script at once, the envs in stack doesn't have a chance to merge
back into `engine_state`, which is only called in `repl`.
It introduces some sort of inconsistency, but I think users use overlays
mostly in repl, so it's good to have such feature first.
# Tests + Formatting
Added 2 tests
# After Submitting
NaN
Bumps [which](https://github.com/harryfei/which-rs) from 7.0.0 to 7.0.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/harryfei/which-rs/releases">which's
releases</a>.</em></p>
<blockquote>
<h2>7.0.3</h2>
<ul>
<li>Update rustix to version 1.0. Congrats to rustix on this milestone,
and thanks <a href="https://github.com/mhils"><code>@mhils</code></a>
for this contribution to which!</li>
</ul>
<h2>7.0.2</h2>
<ul>
<li>Don't return paths containing the single dot <code>.</code>
reference to the current directory, even if the original request was
given in terms of the current directory. Thanks <a
href="https://github.com/jakobhellermann"><code>@jakobhellermann</code></a>
for this contribution!</li>
</ul>
<h2>7.0.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Switch to <code>env_home</code> crate by <a
href="https://github.com/micolous"><code>@micolous</code></a> in <a
href="https://redirect.github.com/harryfei/which-rs/pull/105">harryfei/which-rs#105</a></li>
<li>fixes <a
href="https://redirect.github.com/harryfei/which-rs/issues/106">#106</a>,
bump patch version by <a
href="https://github.com/Xaeroxe"><code>@Xaeroxe</code></a> in <a
href="https://redirect.github.com/harryfei/which-rs/pull/107">harryfei/which-rs#107</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/micolous"><code>@micolous</code></a>
made their first contribution in <a
href="https://redirect.github.com/harryfei/which-rs/pull/105">harryfei/which-rs#105</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/harryfei/which-rs/compare/7.0.0...7.0.1">https://github.com/harryfei/which-rs/compare/7.0.0...7.0.1</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/harryfei/which-rs/blob/master/CHANGELOG.md">which's
changelog</a>.</em></p>
<blockquote>
<h2>7.0.3</h2>
<ul>
<li>Update rustix to version 1.0. Congrats to rustix on this milestone,
and thanks <a href="https://github.com/mhils"><code>@mhils</code></a>
for this contribution to which!</li>
</ul>
<h2>7.0.2</h2>
<ul>
<li>Don't return paths containing the single dot <code>.</code>
reference to the current directory, even if the original request was
given in
terms of the current directory. Thanks <a
href="https://github.com/jakobhellermann"><code>@jakobhellermann</code></a>
for this contribution!</li>
</ul>
<h2>7.0.1</h2>
<ul>
<li>Get user home directory from <code>env_home</code> instead of
<code>home</code>. Thanks <a
href="https://github.com/micolous"><code>@micolous</code></a> for this
contribution!</li>
<li>If home directory is unavailable, do not expand the tilde to an
empty string. Leave it as is.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="1d145deef8"><code>1d145de</code></a>
release version 7.0.3</li>
<li><a
href="f5e5292234"><code>f5e5292</code></a>
fix unrelated lint error</li>
<li><a
href="4dcefa6fe9"><code>4dcefa6</code></a>
bump rustix</li>
<li><a
href="bd868818bd"><code>bd86881</code></a>
bump version, add to changelog</li>
<li><a
href="cf37760ea1"><code>cf37760</code></a>
don't run relative dot test on macos</li>
<li><a
href="f2c4bd6e8b"><code>f2c4bd6</code></a>
update target to new name for wasm32-wasip1</li>
<li><a
href="87acc088c1"><code>87acc08</code></a>
When searching for <code>./script.sh</code>, don't return
<code>/path/to/./script.sh</code></li>
<li><a
href="68acf2c456"><code>68acf2c</code></a>
Fix changelog to link to GitHub profile</li>
<li><a
href="b6754b2a56"><code>b6754b2</code></a>
Update CHANGELOG.md</li>
<li><a
href="0c63719129"><code>0c63719</code></a>
fixes <a
href="https://redirect.github.com/harryfei/which-rs/issues/106">#106</a>,
bump patch version</li>
<li>Additional commits viewable in <a
href="https://github.com/harryfei/which-rs/compare/7.0.0...7.0.3">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [ansi-str](https://github.com/zhiburt/ansi-str) from 0.8.0 to
0.9.0.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/zhiburt/ansi-str/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
I was messing around with custom types and noticed `nu-protocol`
referring to a `Value::CustomValue` variant that doesn't exist. Fixed it
to say `Value::Custom` instead.
# User-Facing Changes
Documentation mentions the correct variant of `Value`
# Tests + Formatting
No new tests necessary
# After Submitting
- improves rounding error reported in #15851
- my ~~discussion~~ monologue on how filesizes are parsed currently:
#15944
# Description
The issue linked above reported rounding errors when converting MiB to
GiB, which is mainly caused by parsing of the literal.
Nushell tries to convert all filesize values to bytes, but currently
does so in 2 steps:
- first converting it to the next smaller unit in `nu-parser` (so `MiB`
to `KiB`, in this case), and truncating to an `i64` here
- then converting that to bytes in `nu-engine`, again truncating to
`i64`
In the specific example above (`95307.27MiB`), this causes 419 bytes of
rounding error. By instead directly converting to bytes while parsing,
the value is accurate (truncating those 0.52 bytes, or 4.12 bits).
Rounding error in the conversion to GiB is also multiple magnitudes
lower.
(Note that I haven't thoroughly tested this, so I can't say with
confidence that all values would be parsed accurate to the byte.)
# User-Facing Changes
More accurate filesize values, and lower accumulated rounding error in
calculations.
# Tests + Formatting
new test: `parse_filesize` in `nu-parser` - verifies that `95307.27MiB`
is parsed correctly as `99_936_915_947B`
# After Submitting
# Description
Bump nushell to development version.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Use NUSHELL_PAT for winget publish
Closes#14552
# Description
Implemented a new flag to the ```to md``` command to center specific
columns in Markdown table output using a list of CellPaths.
This enhances formatting control for users exporting tables to markdown.
## Example
For the table:
```shell
let t = version | select version build_time | transpose k v
```
```
╭───┬────────────┬────────────────────────────╮
│ # │ k │ v │
├───┼────────────┼────────────────────────────┤
│ 0 │ version │ 0.104.1 │
│ 1 │ build_time │ 2025-05-21 11:15:45 +01:00 │
╰───┴────────────┴────────────────────────────╯
```
Running ```$t | to md``` or ```$t | to md --pretty``` gives us,
respectively:
```
|k|v|
|-|-|
|version|0.104.1|
|build_time|2025-05-21 11:15:45 +01:00|
```
|k|v|
|-|-|
|version|0.104.1|
|build_time|2025-05-21 11:15:45 +01:00|
and
```
| k | v |
| ---------- | -------------------------- |
| version | 0.104.1 |
| build_time | 2025-05-21 11:15:45 +01:00 |
```
| k | v |
| ---------- | -------------------------- |
| version | 0.104.1 |
| build_time | 2025-05-21 11:15:45 +01:00 |
With the new ```center``` flag, when adding ```--center [v]``` to the
previous commands, we obtain, respectively:
```
|k|v|
|-|:-:|
|version|0.104.1|
|build_time|2025-05-21 11:15:45 +01:00|
```
|k|v|
|-|:-:|
|version|0.104.1|
|build_time|2025-05-21 11:15:45 +01:00|
and
```
| k | v |
| ---------- |:--------------------------:|
| version | 0.104.1 |
| build_time | 2025-05-21 11:15:45 +01:00 |
```
| k | v |
| ---------- |:--------------------------:|
| version | 0.104.1 |
| build_time | 2025-05-21 11:15:45 +01:00 |
The new ```center``` option, as demonstrated in the example, not only
formats the Markdown table to center columns but also, when paired with
```pretty```, it also centers the string values within those columns.
The logic works by extracting the column from the CellPath and applying
centering. So, ```--center [1.v]``` is also valid and centers the
```v``` column.
You can also specify multiple columns, for instance, ```--center [v
k]``` will center both columns in the example above.
# User-Facing Changes
The ```to md``` command will support column centering with the new
```center``` flag.
# Tests + Formatting
Added test cases to ensure correct behaviour.
fmt + clippy OK.
# After Submitting
The command documentation needs to be updated with the new ```center```
flag and an example.
Co-authored-by: Marco Cunha <marcomarquesdacunha@tecnico.ulisboa.pt>
Co-authored-by: Marco Cunha <marcomarquesdacunha@tecnico.ulisboa.pt>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Try to fix PAT issue of `winget` publish account, this change may make
publish with `nushell` account work
# Description
This PR fixes a `date humanize` bug and makes it use @LoicRiegel's newer
function `human_time_from_now()`.
### Before
```nushell
❯ (date now) + 3day
Wed, 11 Jun 2025 07:15:48 -0500 (in 3 days)
❯ (date now) + 3day | date humanize
in 2 days
```
### After
```nushell
❯ (date now) + 3day
Wed, 11 Jun 2025 07:23:10 -0500 (in 3 days)
❯ (date now) + 3day | date humanize
in 3 days
```
Closes#15916
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This sets the value to true by default only on Windows. This is not a
legacy code and is used by the Windows Terminal to detect the current
directory (explicitly enabling osc7 did not work). Here are the official
docs:
https://learn.microsoft.com/en-us/windows/terminal/tutorials/new-tab-same-directory
# User-Facing Changes
Windows users will by default have their terminals properly detect the
current working directory without extra configuration/troubleshooting.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The current implementation of `polars pivot` calls an unsupported
version of pivot that throws a warning message in stdout (using
println!) stating that "unstable pivot not yet unsupported, using stable
pivot." This PR swaps out the call to `pivot` with a call to
`pivot_stable`, which is being done in the underlying polars anyways.
```nushell
# Current Implementation
> [[a b c]; [1 x 10] [1 y 10] [2 x 11] [2 y 11]] | polars into-df | polars pivot -i [a] -o [b] -v [c]
unstable pivot not yet supported, using stable pivot
╭───┬───┬────┬────╮
│ # │ a │ x │ y │
├───┼───┼────┼────┤
│ 0 │ 1 │ 10 │ 10 │
│ 1 │ 2 │ 11 │ 11 │
# Proposed Implementation (no println! statement)
> [[a b c]; [1 x 10] [1 y 10] [2 x 11] [2 y 11]] | polars into-df | polars pivot -i [a] -o [b] -v [c]
╭───┬───┬────┬────╮
│ # │ a │ x │ y │
├───┼───┼────┼────┤
│ 0 │ 1 │ 10 │ 10 │
│ 1 │ 2 │ 11 │ 11 │
╰───┴───┴────┴────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Current suite of tests were sufficient
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- basically reverts #15657
- still fixes#15584
- fixes#15784
- related https://github.com/tafia/calamine/pull/506
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The `zip` crate had some issues properly upgrading their repo and did
some yanking shenanigans. Since their yanking took so long `calamine`
tried to fix it but right now pinned to a yanked version of `zip`. This
breaks `cargo update`, `cargo add nu_command` and forces installs to use
`--locked`. For `calamine` exists [a
PR](https://github.com/tafia/calamine/pull/506) that would fix this but
right now that is not merged and we don't know when. Since we only
bumped `calamine` to fix#15584 and with the correctly yanked
`zip@2.5.0` we don't have that issue anymore. So I'm basically reverting
our `calamine` version. As soon as `calamine` updates with the new
version of `zip`, we can bump it again.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Should be none.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
If dependabot tries to bump `calamine` to `0.27.0`, we have to closed
that PR.
# Description
Updates `help where` to better explain row conditions, and provide more
examples. Also, the syntax shape is changed to `one_of(condition,
closure())>`. I don't think this should affect parsing at all because it
should still always be parsed as `SyntaxShape::RowCondition`, but it
should be more clear that you can use a row condition _or_ a closure
here, even if technically we consider closures to be row conditions
internally. In a similar vein, the help text makes this distinction
explicitly to make it more clear to users that closures are supported.
# User-Facing Changes
* Updated `where` help text
---------
Co-authored-by: Bahex <Bahex@users.noreply.github.com>
Co-authored-by: Douglas <32344964+NotTheDr01ds@users.noreply.github.com>
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
- Updated the second @example for `find` to "Try to find an even
element" to match the closure logic.
- Updated the second @example for `find-index` to "Try to find the index
of an even element" for consistency.
I did a naive fix; which is probably all right.
But I want to spend some time to refactor a neighboring stuff.
And it's yet not to be released I guess;
I hope to add a few things beforehand.
I've just opened it so you can verify that it must be addressed.
close#15104, #14910, #15256
# Description
This PR fixes drive-letter glob expansion on Windows. It adds a bit of
pre-processing to play better with the wax crate.
This change is following suggestions from this thread on the wax repo:
https://github.com/olson-sean-k/wax/issues/34fixes#15707#7125
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes#15884.
Adds `--disable-tag` flag to the `gstat` plugin that disables expensive
calculations. Instead `gstat` reports `no_tag`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
There is no change in behaviour if the flag is not provided.
If the flag is provided, it will behave like there is no tags in the
repo, so no existing config will break.
**Title**: Better error handling for negative integer exponents in `**`
operator
---
### Bug Fix
This PR addresses an issue where attempting to raise an integer to a
negative power (e.g. `10 ** -1`) incorrectly triggered an
`OperatorOverflow` error. This behavior was misleading since the
overflow isn't actually the root problem — it's the unsupported
operation of raising integers to negative powers.
---
### Fix Summary
* Updated `Value::pow` to:
* Check for negative exponents when both operands are integers.
* Return a `ShellError::IncorrectValue` with a helpful message guiding
users to use floating point values instead.
#### Example:
```bash
> 10 ** -1
Error: nu:🐚:incorrect_value
× Incorrect value.
╝─[entry #2:1:4]
1 │ 10 ** -1
· ─┬┬
· │╰── encountered here
· ╰── Negative exponent for integer power is unsupported; use floats instead.
```
---
### Testing
Manual testing:
* `10 ** -1` → now returns a clear and appropriate `IncorrectValue`
error.
* `10.0 ** -1`, `10 ** -1.0`, etc. continue to work as expected.
---
### Related
Fixes#15860
---------
Co-authored-by: Kumar Ujjawal <kumar.ujjawal@greenpista.com>
# Description
This PR improves the installation process of Nushell's Windows Terminal
Profile by adding proper quoting when refilling the path to `nu.exe` and
`nu.ico`.
**Crossref:**
https://github.com/microsoft/terminal/issues/6082#issuecomment-1001226003
**Affected lines:**
222c307648/wix/main.wxs (L278-L282)
Currently, when any part of the installation path of `nu.exe` contains
spaces, the auto-generated profile would contain a truncated path due to
improper quoting. At best, this would cause failures when launching the
profile. At worst, this could lead to executable hijacks.
Assume this default-generated profile with the username "Mantle Bao":
```json
{
"profiles": [
{
"guid": "{47302f9c-1ac4-566c-aa3e-8cf29889d6ab}",
"name": "Nushell",
"commandline": "C:\\Users\\Mantle Bao\\AppData\\Local\\Programs\\nu\\bin\\nu.exe",
"icon": "C:\\Users\\Mantle Bao\\AppData\\Local\\Programs\\nu\\nu.ico",
"startingDirectory": "%USERPROFILE%"
}
]
}
```
And a file named "Mantle" exists under `C:\Users\`:
```nushell
> sudo nu -c `touch C:\Users\Mantle`
> ls `C:\Users\` | find "Mantle" | select name type
╭───┬─────────────────────────────────────────────────┬──────╮
│ # │ name │ type │
├───┼─────────────────────────────────────────────────┼──────┤
│ 0 │ C:\Users\Mantle │ file │
│ 1 │ C:\Users\Mantle Bao │ dir │
╰───┴─────────────────────────────────────────────────┴──────╯
>
```
Launching this profile produces this error in Windows Terminal
1.22.11141.0:
```plain-text
[error 2147942593 (0x800700c1) when launching `C:\Users\Mantle Bao\AppData\Local\Programs\nu\bin\nu.exe']
```
[Looking
up](https://learn.microsoft.com/en-us/windows/win32/debug/system-error-code-lookup-tool)
this error code would yield its name as `ERROR_BAD_EXE_FORMAT`, since
the Windows shell will try to execute `C:\\Users\\Mantle` but not the
actual `nu.exe`.
## Hijacking PoC
# User-Facing Changes
None. It should only affect the installation phase without any
user-facing changes.
# Tests + Formatting
This PR does not modify Rust or Nu code, and all its improvements belong
to the packaging system. Thus, no conventional tests or formatting
apply. But in case there exists preferred ways to test the packaging
process, please inform me of those, and I would make appropriate
changes.
# After Submitting
None. It should only affect the installation phase without any
post-submission edits.
# Description
Close: #15747
To support `reload` feature, we just need to save `caller_stack` before
adding overlay, then redirect_env back after the overlay is added.
# User-Facing Changes
NaN
# Tests + Formatting
Added 1 test
# After Submitting
NaN
# Description
Simple `parse` patterns let you quickly put together simple parsers, but
sometimes you aren't actually interested in some of the output (such as
variable whitespace). This PR lets you use `{_}` to discard part of the
input.
Example:
```nushell
"hello world" | parse "{foo} {_}"
# => ╭───┬───────╮
# => │ # │ foo │
# => ├───┼───────┤
# => │ 0 │ hello │
# => ╰───┴───────╯
```
here's a simple parser for the `apropops` using the `_` placeholder to
discard the variable whitespace, without needing to resort to a full
regex pattern:
```nushell
apropos linux | parse "{name} ({section}) {_}- {topic}"
# => ╭───┬───────────────────────────────────────┬─────────┬─────────────────────────────────────────────────────────────────────╮
# => │ # │ name │ section │ topic │
# => ├───┼───────────────────────────────────────┼─────────┼─────────────────────────────────────────────────────────────────────┤
# => │ 0 │ PAM │ 8 │ Pluggable Authentication Modules for Linux │
# => │ 1 │ aarch64-linux-gnu-addr2line │ 1 │ convert addresses or symbol+offset into file names and line numbers │
# => │ 2 │ ... │ ... │ ... │
# => │ 3 │ xcb_selinux_set_window_create_context │ 3 │ (unknown subject) │
# => │ 4 │ xorriso-dd-target │ 1 │ Device evaluator and disk image copier for GNU/Linux │
# => ╰───┴───────────────────────────────────────┴─────────┴─────────────────────────────────────────────────────────────────────╯
```
# User-Facing Changes
* `parse` simple patterns can now discard input using `{_}`
# Tests + Formatting
N/A
# After Submitting
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
When calling external commands, we convert our `$env` into a map where
each value is a string. If a value cannot be converted, it will be
skipped or when an `ENV_CONVERSION` is defined, will be converted via
that. This makes this conversion not that trivial. To ease debugging
this behavior or allowing to generate `.env` files from the current
environment did I add `debug env`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New command `debug env`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I did not add extra tests, as I just called the function we also call in
`start`, `exec` or `run-external`.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
I can use this to make my life easier implementing `colcon-nushell` 😉
# Description
This test has failed a number of times specifically on macOS. I'm not
exactly sure what the issue is, it seemed to work fine before. We should
probably actually fix it, but flaky CI is worse than missing this one
test on macOS
cc @cosineblast
# Description
Following #15843, I have tinkered more with it and realized that there
are plenty of features from
[hyperfine](https://github.com/sharkdp/hyperfine) that could be
implemented pretty easily.
- `--warmup` flag to do `n` runs without benchmarking first, useful to
fill disk cache
```nu
@example "use --warmup to fill the disk cache before benchmarking" { bench { fd } { jwalk . -k } -w 1 -n 10 }
```
- `--setup`, `--prepare`, `--cleanup`, `--conclude` flags to run code
before/after benchmarks
```nu
@example "use `--setup` to compile before benchmarking" { bench { ./target/release/foo } --setup { cargo build --release } }
@example "use `--prepare` to benchmark rust compilation speed" { bench { cargo build --release } --prepare { cargo clean } }
```
- `--ignore-errors` to ignore any errors in the benchmarked commands
- benchmarked commands are now `| ignore` so that externals don't fill
the screen
## Summary
This PR removes the required positional argument from the `which`
command, allowing it to accept input via the spread (`...`) operator.
This enables expressions like:
```nu
[notepad cmd] | which ...$in
```
Previously, this failed due to a missing required positional argument.
The Nushell runtime already handles empty input gracefully, so the
change aligns with existing behavior.
---
## Motivation
Making `which` compatible with splatted input improves composability and
aligns with user expectations in scriptable environments. It supports
patterns where the input may be constructed dynamically or piped in from
earlier commands.
---
## Changes
* Removed the `required` attribute from the positional argument in the
`which` command signature.
* No additional runtime logic required since empty input is handled
gracefully already.
---
## Examples
### Before
```nu
[notepad cmd] | which ...$in
# ❌ Error: Missing required positional argument
```
### After
```nu
[notepad cmd] | which ...$in
# ✅ Executes correctly
```
---
## Testing
* Ran `cargo test --all` and `cargo test -p nu-command`
* Manually tested using spread input with the `which` command
* Confirmed that empty and non-empty inputs behave correctly
---
## Related Issues
Closes
[[#15801](https://github.com/nushell/nushell/issues/15801)](https://github.com/nushell/nushell/issues/15801)
---------
Co-authored-by: Kumar Ujjawal <kumar.ujjawal@greenpista.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR seeks to port the polars command `replace`
(https://docs.pola.rs/api/python/stable/reference/expressions/api/polars.Expr.replace.html)
and `replace_strict`
(https://docs.pola.rs/api/python/stable/reference/expressions/api/polars.Expr.replace_strict.html).
See examples below.
Consequently, the current `polars replace` and `polars replace-all` have
been renamed to `polars str-replace` and `polars str-replace-all` to
bring their naming better in-line with `polars str-join` and related str
commands.
```nushell
Usage:
> polars replace {flags} <old> (new)
Flags:
-h, --help: Display the help message for this command
-s, --strict: Require that all values must be replaced or throw an error (ignored if `old` or `new` are expressions).
-d, --default <any>: Set values that were not replaced to this value. If no default is specified, (default), an error is raised if any values were not replaced. Accepts expression input. Non-expression inputs are parsed as literals.
-t, --return-dtype <string>: Data type of the resulting expression. If set to `null` (default), the data type is determined automatically based on the other inputs.
Parameters:
old <one_of(record, list<any>)>: Values to be replaced
new <list<any>>: Values to replace by (optional)
Input/output types:
╭───┬────────────┬────────────╮
│ # │ input │ output │
├───┼────────────┼────────────┤
│ 0 │ expression │ expression │
╰───┴────────────┴────────────╯
Examples:
Replace column with different values of same type
> [[a]; [1] [1] [2] [2]]
| polars into-df
| polars select (polars col a | polars replace [1 2] [10 20])
| polars collect
╭───┬────╮
│ # │ a │
├───┼────┤
│ 0 │ 10 │
│ 1 │ 10 │
│ 2 │ 20 │
│ 3 │ 20 │
╰───┴────╯
Replace column with different values of another type
> [[a]; [1] [1] [2] [2]]
| polars into-df
| polars select (polars col a | polars replace [1 2] [a b] --strict)
| polars collect
╭───┬───╮
│ # │ a │
├───┼───┤
│ 0 │ a │
│ 1 │ a │
│ 2 │ b │
│ 3 │ b │
╰───┴───╯
Replace column with different values based on expressions (cannot be used with strict)
> [[a]; [1] [1] [2] [2]]
| polars into-df
| polars select (polars col a | polars replace [(polars col a | polars max)] [(polars col a | polars max | $in + 5)])
| polars collect
╭───┬───╮
│ # │ a │
├───┼───┤
│ 0 │ 1 │
│ 1 │ 1 │
│ 2 │ 7 │
│ 3 │ 7 │
╰───┴───╯
Replace column with different values based on expressions with default
> [[a]; [1] [1] [2] [3]]
| polars into-df
| polars select (polars col a | polars replace [1] [10] --default (polars col a | polars max | $in * 100) --strict)
| polars collect
╭───┬─────╮
│ # │ a │
├───┼─────┤
│ 0 │ 10 │
│ 1 │ 10 │
│ 2 │ 300 │
│ 3 │ 300 │
╰───┴─────╯
Replace column with different values based on expressions with default
> [[a]; [1] [1] [2] [3]]
| polars into-df
| polars select (polars col a | polars replace [1] [10] --default (polars col a | polars max | $in * 100) --strict --return-dtype str)
| polars collect
╭───┬─────╮
│ # │ a │
├───┼─────┤
│ 0 │ 10 │
│ 1 │ 10 │
│ 2 │ 300 │
│ 3 │ 300 │
╰───┴─────╯
Replace column with different values using a record
> [[a]; [1] [1] [2] [2]]
| polars into-df
| polars select (polars col a | polars replace {1: a, 2: b} --strict --return-dtype str)
| polars collect
╭───┬───╮
│ # │ a │
├───┼───┤
│ 0 │ a │
│ 1 │ a │
│ 2 │ b │
│ 3 │ b │
╰───┴───╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
**BREAKING CHANGE**: `polars replace` and `polars replace-all` have been
renamed to `polars str-replace` and `polars str-replace-all`.
The new `polars replace` now replaces elements in a series/column rather
than patterns within strings.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Example tests were added.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR involves two changes: (1) adding `maintain-order` flag to
`polars group-by` for stable sorting when aggregating and (2) allow
expression inputs in `polars filter`. The first change was necessary to
reliably test the second change, and the two commits are therefore
combined in one PR. See example:
```nushell
# Filter a single column in a group-by context
> [[a b]; [foo 1] [foo 2] [foo 3] [bar 2] [bar 3] [bar 4]] | polars into-df
| polars group-by a --maintain-order
| polars agg {
lt: (polars col b | polars filter ((polars col b) < 2) | polars sum)
gte: (polars col b | polars filter ((polars col b) >= 3) | polars sum)
}
| polars collect
╭───┬─────┬────┬─────╮
│ # │ a │ lt │ gte │
├───┼─────┼────┼─────┤
│ 0 │ foo │ 1 │ 3 │
│ 1 │ bar │ 0 │ 7 │
╰───┴─────┴────┴─────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No breaking changes.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
An example test was added to `polars filter` demonstrating both the
stable group-by feature and the expression filtering feature.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- Use #15770 to
- improve `get --sensitive` deprecation warning
- add deprecation warning for `filter`
- refactor `filter` to use `where` as its implementation
- replace usages of `filter` with `where` in `std`
# User-Facing Changes
- `get --sensitive` will raise a warning only once, during parsing
whereas before it was raised during runtime for each usage.
- using `filter` will raise a deprecation warning, once
# Tests + Formatting
No existing test broke or required tweaking. Additional tests covering
this case was added.
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
# Description
This PR fixes and oversight. When we added `nul`, `null_byte`, and
`zero_byte` we forgot to make them non-printable for `char --list`.
That's what this PR fixes.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Hello!
This is my 1st contribution and an attempt at fixing #15417.
# Description
When parsing a brace expression, check if the shape is a block or match
block before attempting to parse it as a closure.
Results:
- `if true {|| print hi}` now produces a `nu::parser` error instead of
executing and outputting `hi`. The `nu::parser` error is the same one
produced by running `|| print hi` (`nu::parser::shell_oror`)
- `match true {|| print hi}` now fails with a `nu::parser` error instead
of passing parsing and failing with `nu::compile::invalid_keyword_call`
My understanding reading the code/docs is that the shape is a contextual
constraint that needs to be satisfied for parsing to succeed, in this
case the `if` placing a `Block` shape constraint on next tokens. So it
would need to be checked in priority (if not `Any`) to understand how
the next tokens should be parsed. Is that correct? Or is there a reason
I'm not aware of to ignore the shape and attempt to parse as closure
like it's currently the case when the parser sees `|` or `||` as next
tokens?
# User-Facing Changes
No change in behaviour, but this PR fixes parsing to fail on some
incorrect syntax which could be considered a breaking change.
# Tests + Formatting
- Added corresponding tests
- `toolkit check pr` passed
Fixes#15788
# Description
Fixes null handling. Thanks to @MMesch for reporting and taking a first
stab at fixing.
Co-authored-by: Jack Wright <jack.wright@nike.com>
# Description
Provides functionality similar to
https://docs.pola.rs/api/python/stable/reference/dataframe/api/polars.dataframe.group_by.GroupBy.first.html
by allowing polars first to be used with a group by
```
> ❯ : [[a b c d]; [1 0.5 true Apple] [2 0.5 true Orange] [2 4 true Apple] [3 10 false Apple] [4 13 false Banana] [5 14 true Banana]] | polars into-df -s {a: u8, b: f32, c: bool, d: str} | polars group-by d | polars first | polars collect
╭───┬────────┬───┬───────┬───────╮
│ # │ d │ a │ b │ c │
├───┼────────┼───┼───────┼───────┤
│ 0 │ Apple │ 1 │ 0.50 │ true │
│ 1 │ Banana │ 4 │ 13.00 │ false │
│ 2 │ Orange │ 2 │ 0.50 │ true │
╰───┴────────┴───┴───────┴───────╯
```
Additionally, I am setting the POLARS_ALLOW_EXTENSION to true to avoid
panicking with operations using the dtype object. The conversion will
fallback to object when the type cannot be determining, so this could be
a common case.
# User-Facing Changes
- `polars first` can now be used with `polars group-by`
---------
Co-authored-by: Jack Wright <jack.wright@nike.com>
# Description
Polars 0.48 upgrade
# User-Facing Changes
- (breaking change) Due to a change in behavior in polars, `polars
is-in` now only works as an expression.
---------
Co-authored-by: Jack Wright <jack.wright@nike.com>
# Description
Like [hyperfine](https://github.com/sharkdp/hyperfine), I have added the
option to the `bench` command to benchmark multiple commands and then
compare the results.
```
→ bench { ls -a | is-empty } { fd | is-empty }
# | code | mean | min | max | std | ratio
---+----------------------+------------------+-----------------+------------------+-------------+-------
0 | { ls -a | is-empty } | 3ms 816µs 562ns | 3ms 670µs 400ns | 4ms 334µs | 146µs 304ns | 1.00
1 | { fd | is-empty } | 33ms 325µs 304ns | 31ms 963µs | 36ms 328µs 500ns | 701µs 295ns | 8.73
→ bench -p { ls -a | is-empty } { fd | is-empty }
Benchmark 1: { ls -a | is-empty }
3ms 757µs 124ns +/- 103µs 165ns
Benchmark 2: { fd | is-empty }
33ms 403µs 680ns +/- 704µs 904ns
{ ls -a | is-empty } ran
8.89 times faster than { fd | is-empty }
```
When passing a single closure, it should behave the same except that
now, the `--verbose` flag controls whether the durations of every round
is printed, and the progress indicator is in it's own flag `--progress`.
# User-Facing Changes
There are user-facing changes, but I don't think anyone is using the
output of `bench` programmatically so it hopefully won't break anything.
---------
Co-authored-by: Bahex <Bahex@users.noreply.github.com>
# Description
Adds the content type for `view span` output. Allows the display hook to
add syntax highlighting.
# User-Facing Changes
`view span` output will now have a content type set.
# Tests + Formatting
All pass, except for those that never pass on my machine.
# Description
Regex search and search with directly provided search terms used to
follow two different code paths. Now all possible search options get
turned into a regex, with optional additional search options, and
handled using a unified code path which mostly follows the logic of the
current term code path.
# User-Facing Changes
Regex search will now behave in the same way as non-regex search:
- split multiline strings into lists of lines, and filter out the lines
that don't match
- highlight matching string sections (unless --no-highlight flag is
used)
- search through the specified record columns if the --columns flag is
used
The behavior of non-regex search should be unaffected by this commit.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR replaces the default `input` implementation with `reedline`. It
provides a fully backwards compatible implementation, by leveraging left
prompt provided through `input "my-prompt> "` provided by reedline.
The default indicator is hidden to be fully backwards compatible, the
multiline indicator is kept.
The legacy implementation will be used when the user passes options
truncating input such as `--bytes-until` or `--numchar` or
`--suppress-output` which I didn't find a straightforward implementation
through reedline.
# User-Facing Changes
No breaking change.
- Adds ability to enter multi-line input with reedline.
- Adds ability to pass a command history through the pipe `["command",
"history"] | input`- Adds ability to pass a history file through the
params `input --history-file path/to/history`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR seeks to expand the `polars shift` command to take expression
inputs. See third example below:
```nushell
Examples:
Shifts the values by a given period
> [1 2 2 3 3] | polars into-df | polars shift 2 | polars drop-nulls
╭───┬───╮
│ # │ 0 │
├───┼───┤
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 2 │
╰───┴───╯
Shifts the values by a given period, fill absent values with 0
> [1 2 2 3 3] | polars into-lazy | polars shift 2 --fill 0 | polars collect
╭───┬───╮
│ # │ 0 │
├───┼───┤
│ 0 │ 0 │
│ 1 │ 0 │
│ 2 │ 1 │
│ 3 │ 2 │
│ 4 │ 2 │
╰───┴───╯
Shift values of a column, fill absent values with 0
> [[a]; [1] [2] [2] [3] [3]]
| polars into-lazy
| polars with-column {b: (polars col a | polars shift 2 --fill 0)}
| polars collect
╭───┬───┬───╮
│ # │ a │ b │
├───┼───┼───┤
│ 0 │ 1 │ 0 │
│ 1 │ 2 │ 0 │
│ 2 │ 2 │ 1 │
│ 3 │ 3 │ 2 │
│ 4 │ 3 │ 2 │
╰───┴───┴───╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No breaking changes.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
An example test was added to `polars shift`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR enhances the MSI release workflow by allowing the MSI package
version to be specified either through an environment variable or a
workflow input. This improvement provides greater flexibility when
building MSI packages for tags that do **not** match the latest package
version in `Cargo.toml`.
Fix possible **403** error while updating `SHA256SUMS` file in the
nushell/nightly repo
# User-Facing Changes
None
# Tests + Formatting
A example running record:
https://github.com/nushell/nightly/actions/runs/15265879087/job/42931344366#step:5:11
# Description
Fixes#15734. With case-insensitive matching, when completing a
file/folder, there can be multiple exact matches. For example, if you
have three folders `aa/`, `AA/`, and `aaa/`, `aa/<TAB>` should match all
of them. But, as reported in #15734, when using prefix matching, only
`AA/` will be shown. This is because when there's an exact match in
prefix match mode, we only show the first exact match.
There are two options for fixing this:
- Show all matched suggestions (`aa/`, `AA/`, and `aaa/`)
- I chose this option
- Show only the suggestions that matched exactly (`aa/` and `AA/`) but
not others (`aaa/`)
- This felt unintuitive
# User-Facing Changes
As mentioned above, when:
- you have multiple folders with the same name but in different cases
- and you're using prefix matching
- and you're using case-insensitive matching
- and you type in the name of one of these folders exactly
then you'll be suggested every folder matching the typed text, rather
than just exact matches
# Tests + Formatting
I added a test that doesn't run on Windows or MacOS (to avoid
case-insensitive filesystems). While adding this test, I felt like using
`Playground` rather than adding files to `tests/fixtures`. To make this
easier, I refactored the `new_*_engine()` helpers in
`completion_helpers.rs` a bit. There was quite a bit of code duplication
there.
# After Submitting
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a number of math functions under a single `polars math`
command that apply to one or more column expressions.
Note, `polars math` currently resides in the new module
dataframe/command/command/computation/math.rs. I'm open to alternative
organization and naming suggestions.
```nushell
Collection of math functions to be applied on one or more column expressions
This is an incomplete implementation of the available functions listed here: https://docs.pola.rs/api/python/stable/reference/expressions/computation.html.
The following functions are currently available:
- abs
- cos
- dot <expression>
- exp
- log <base; default e>
- log1p
- sign
- sin
- sqrt
Usage:
> polars math <type> ...(args)
Flags:
-h, --help: Display the help message for this command
Parameters:
type <string>: Function name. See extra description for full list of accepted values
...args <any>: Extra arguments required by some functions
Input/output types:
╭───┬────────────┬────────────╮
│ # │ input │ output │
├───┼────────────┼────────────┤
│ 0 │ expression │ expression │
╰───┴────────────┴────────────╯
Examples:
Apply function to column expression
> [[a]; [0] [-1] [2] [-3] [4]]
| polars into-df
| polars select [
(polars col a | polars math abs | polars as a_abs)
(polars col a | polars math sign | polars as a_sign)
(polars col a | polars math exp | polars as a_exp)]
| polars collect
╭───┬───────┬────────┬────────╮
│ # │ a_abs │ a_sign │ a_exp │
├───┼───────┼────────┼────────┤
│ 0 │ 0 │ 0 │ 1.000 │
│ 1 │ 1 │ -1 │ 0.368 │
│ 2 │ 2 │ 1 │ 7.389 │
│ 3 │ 3 │ -1 │ 0.050 │
│ 4 │ 4 │ 1 │ 54.598 │
╰───┴───────┴────────┴────────╯
Specify arguments for select functions. See description for more information.
> [[a]; [0] [1] [2] [4] [8] [16]]
| polars into-df
| polars select [
(polars col a | polars math log 2 | polars as a_base2)]
| polars collect
╭───┬─────────╮
│ # │ a_base2 │
├───┼─────────┤
│ 0 │ -inf │
│ 1 │ 0.000 │
│ 2 │ 1.000 │
│ 3 │ 2.000 │
│ 4 │ 3.000 │
│ 5 │ 4.000 │
╰───┴─────────╯
Specify arguments for select functions. See description for more information.
> [[a b]; [0 0] [1 1] [2 2] [3 3] [4 4] [5 5]]
| polars into-df
| polars select [
(polars col a | polars math dot (polars col b) | polars as ab)]
| polars collect
╭───┬────────╮
│ # │ ab │
├───┼────────┤
│ 0 │ 55.000 │
╰───┴────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No breaking changes.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Example tests were added to `polars math`.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Merged PR #15553 added the ability to provide expressions in the form of
records. This PR conforms the `NuExpression::can_downcast` logic to
account for the newly allowed records argument type. As such, commands
that rely on `can_downcast` in their implementation (e.g., `polars
with-column`) will no longer err when provided with a record. See
example below:
```nushell
# Current error
> [[a b]; [1 2] [3 4]]
| polars into-df <-- only works if cast as lazyframe
| polars with-column {
c: ((polars col a) * 2)
d: ((polars col a) * 3)
}
Error: nu:🐚:cant_convert
× Can't convert to NuDataFrame, NuLazyFrame, NuExpression, NuLazyGroupBy, NuWhen,
│ NuDataType, NuSchema.
╭─[entry #24:3:26]
2 │ | polars into-df
3 │ ╭─▶ | polars with-column {
4 │ │ c: ((polars col a) * 2)
5 │ │ d: ((polars col a) * 3)
6 │ ├─▶ }
· ╰──── can't convert record<c: NuExpression, d: NuExpression> to NuDataFrame, NuLazyFrame, NuExpression, NuLazyGroupBy, NuWhen, NuDataType, NuSchema
╰────
# Fixed
> [[a b]; [1 2] [3 4]]
| polars into-df
| polars with-column {
c: ((polars col a) * 2)
d: ((polars col a) * 3)
} | polars collect
╭───┬───┬───┬───┬───╮
│ # │ a │ b │ c │ d │
├───┼───┼───┼───┼───┤
│ 0 │ 1 │ 2 │ 2 │ 3 │
│ 1 │ 3 │ 4 │ 6 │ 9 │
╰───┴───┴───┴───┴───╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No breaking changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
An example test was added to `polars with-column`.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This pull request addresses an issue#15813 where passing a infinite
value in the random float 1.. command that causes a panic in the shell.
The root cause of this problem lies within the rng library, which is
responsible for generating random numbers.
Before
# User-Facing Changes
Users where seeing panic error when passed unbounded end into range.
# Tests + Formatting
added `generate_inf`
# After Submitting
No error should be there after
Edit history
1. Updated `After Submitting` section
---------
Co-authored-by: Ritik Ranjan <e02948@ritik.ranjan@hsc.com>
- related #10698
# Description
In my endeavor to make the `ShellError` less crowded I moved the job
related errors into `ShellError::Job` with a `JobError` enum. Mostly I
just moved the codes, errors and labels over to the new enum.
https://github.com/nushell/nushell/issues/10957
Hello, this PR proposes a solution for some requested features mentioned
in https://github.com/nushell/nushell/issues/10957. I personally think
these are very simple changes that bring significant quality of life
improvements.
It gives the possibility to do `http get google.com` instead of `http
get http://google.com` and `http get :8080` instead of `http get
http://localhost:8080`.
I did not address the other part of the issue (data management) as those
are more controversial.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Update comments of release-pkg.nu for building of MSI package
Fixes#15571
# Description
Writing to a source `.parquet` (`polars open some_file.parquet | polars
save some_file.parquet`) file made the plugin panic, added a guard to
check the data_source path as per [this
comment](https://github.com/nushell/nushell/issues/15571#issuecomment-2812707161)
Example output now:
<img width="850" alt="Screenshot 2025-04-18 at 21 10 30"
src="https://github.com/user-attachments/assets/40a73cc7-6635-43dc-a423-19c7a0c8f59c"
/>
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
- Add 1 test
- clippy OK
- cargo fmt OK
# After Submitting
No action required
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
closes#14041
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR switches our default TLS backend from `native-tls` to `rustls`.
Cross-compiles, `musl`, and other targets build smoother because we drop
the OpenSSL requirement.
`native-tls` is still available as an opt-in on `nu-command` via the
`native-tls` feature.
WASM + `network` still fails for unrelated crates, but the OpenSSL
roadblock is gone.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No changes to the Nushell API.
If you embed Nushell you now need to pick a
[`rustls::crypto::CryptoProvider`](https://docs.rs/rustls/0.23.27/rustls/crypto/struct.CryptoProvider.html)
at startup:
```rust
use nu_command::tls::CRYPTO_PROVIDER;
// common case
CRYPTO_PROVIDER.default();
// or supply your own
CRYPTO_PROVIDER.set(|| Ok(my_provider()));
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
* 🟢 `toolkit fmt`
* 🟢 `toolkit clippy`
* 🟢 `toolkit test`
* 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: https://github.com/nushell/nushell/issues/15749
When sourcing a file, the ir block might be empty because it has been
used before, this pr is going to make sure that the ir block is
compiled.
# User-Facing Changes
```
touch aaa.nu
use aaa.nu
source aaa.nu
```
Will no longer raise an error.
# Tests + Formatting
Added 1 test
# After Submitting
NaN
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Bump dev version to 0.104.2
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Try to use nushell's fork for winget-pkgs publishing
# Description
`pub` has been overused in many parts of `nu-protocol`. This exposes
implementation details in ways that things could break should we involve
the internals. Also each public member can slow down the decisions to
improve a certain implementation. Furthermore dead code can't be
detected if things are marked as `pub`. Thus we need to judiciously
remove more accidentally `pub` markings and eliminate the dead code if
we come across it.
This PR tackles `EngineState` and `StateWorkingSet` as important
components of the engine and `nu-protocol`. Prompted by a large number
of confusingly named methods surrounding overlays and scope management.
- **Hide overlay predecl logic**
- **Remove dead overlay code**
- **Remove unused helper**
- **Remove dead overlay code from `EngineState`**
- **Hide update_plugin_file impl detail**
- **Hide another overlay internal detail`**
# API User-Facing Changes
Removal of several formerly public members that potentially give
intrusive access to the engine. We will button up some of our public
API, feel free to explicitly complain so we can figure out what access
should be granted. We want to evolve to stable APIs as much as possible
which means hiding more implementation details and committing to a
select few well defined and documented interfaces
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Publishing Nushell to winget has always been a challenge for us, and to
this day, many issues remain unresolved—and some seem almost impossible
to fix. The road to solving these problems may be winding and long, but
it's time for us to set out on this journey.
This PR try to fix the Windows arm64 release binaries and some `winget`
related issues:
- [x] Fixes https://github.com/nushell/nushell/issues/14815: build
Windows arm64 binaries by Windows arm64 runner
- [x] Upgrade WiX Toolset to latest 6.0 version: WiX 3 we used currently
doesn't support arm64 arch and [WiX v4 Security Fixes End Date is
2025/02/05](https://docs.firegiant.com/wix/)
- [x] Update the **nightly** workflow to make it work for all future
releases
- [x] Update the **release** workflow to make it work for all future
releases
- [x] Fixes https://github.com/nushell/nushell/issues/15698
- [x] Fixes https://github.com/nushell/nushell/issues/13719 so that
Nushell should be possible to be installed via winget with both user and
machine scope
- [x] Fixes https://github.com/nushell/nushell/issues/5927
- [x] Try to fix https://github.com/nushell/nushell/issues/14786
- [x] Fixes https://github.com/nushell/nushell/issues/9537
## Related but not planed issues:
- Related https://github.com/nushell/nushell/issues/13017
- Related https://github.com/nushell/nushell/issues/8053
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Nushell should be possible to be installed via winget with both user
and machine scope and The default should be user scope
- User scope install by winget: `winget install Nushell.Nushell`
- User scope install by msiexec: `msiexec /i
nu-0.104.1-x86_64-pc-windows-msvc.msi /quiet /qn`
- Machine scope install by winget: `winget install Nushell.Nushell
--override 'ALLUSERS=1'`
- Machine scope install by msiexec: `msiexec /i
nu-0.104.1-x86_64-pc-windows-msvc.msi ALLUSERS=1`
- Note that `--scope` flag for `winget install` does not work use
`--override` instead
- Default user scope install dir:
`$'($nu.home-path)\AppData\Local\Programs\nu\'`
- Default machine scope install dir: `C:\Program Files\nu\`
- When a standard user runs the installer and selects "Install for
everyone" (per-machine installation), Windows will automatically trigger
a UAC prompt, the user can enter admin credentials and the installation
will proceed with elevated privileges
- [hustcer/setup-nu](https://github.com/hustcer/setup-nu) should work
for `windows-11-arm` runners
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
The latest MSI builds are available here:
https://github.com/nushell/nightly/releases/tag/v0.104.1
Actually all the nightly releases were built with latest changes
included: https://github.com/nushell/nightly/releases
`winget` and `msiexec` install tests goes here:
https://github.com/nushell/integrations/pull/49https://github.com/nushell/integrations/actions/runs/14974621061https://github.com/nushell/integrations/actions/runs/14974621054
### Test winget install locally:
- git clone git@github.com:nushell/integrations.git
- User scope install: `winget install -m
manifests\n\Nushell\Nushell\0.104.1\`
- Run: `use tests\common.nu *; check-user-install`
- Machine scope install: `winget install -m
manifests\n\Nushell\Nushell\0.104.1\ --override 'ALLUSERS=1'`
- Run: `use tests\common.nu *; check-local-machine-install`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
@fdncred I suggest releasing a patch version after merging this PR (only
the changes of this PR will be included) to ensure that the winget
release process works properly. This way, we can be more confident when
releasing version 0.105.0.
References:
-
https://learn.microsoft.com/en-us/windows/win32/msi/single-package-authoring
-
https://learn.microsoft.com/en-us/windows/package-manager/winget/source#add
-
https://github.com/microsoft/winget-pkgs/blob/master/doc/tools/SandboxTest.md
- https://docs.firegiant.com/quick-start/
-
https://docs.firegiant.com/wix3/tutorial/getting-started/putting-it-to-use/#_top
-
https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/msiexec#set-public-properties
Related:
- #15683
- #14551
- #849
- #12701
- #11527
# Description
Currently various commands have differing behavior regarding cell-paths
```nushell
{a: 1, A: 2} | get a A
# => ╭───┬───╮
# => │ 0 │ 2 │
# => │ 1 │ 2 │
# => ╰───┴───╯
{a: 1, A: 2} | select a A
# => ╭───┬───╮
# => │ a │ 1 │
# => │ A │ 2 │
# => ╰───┴───╯
{A: 1} | update a 2
# => Error: nu:🐚:column_not_found
# =>
# => × Cannot find column 'a'
# => ╭─[entry #62:1:1]
# => 1 │ {A: 1} | update a 2
# => · ───┬── ┬
# => · │ ╰── cannot find column 'a'
# => · ╰── value originates here
# => ╰────
```
Proposal: making cell-path access case-sensitive by default and adding
new syntax for case-insensitive parts, similar to optional (?) parts.
```nushell
{FOO: BAR}.foo
# => Error: nu:🐚:name_not_found
# =>
# => × Name not found
# => ╭─[entry #60:1:21]
# => 1 │ {FOO: BAR}.foo
# => · ─┬─
# => · ╰── did you mean 'FOO'?
# => ╰────
{FOO: BAR}.foo!
# => BAR
```
This would solve the problem of case sensitivity for all commands
without causing an explosion of flags _and_ make it more granular
Assigning to a field using a case-insensitive path is case-preserving.
```nushell
mut val = {FOO: "I'm FOO"}; $val
# => ╭─────┬─────────╮
# => │ FOO │ I'm FOO │
# => ╰─────┴─────────╯
$val.foo! = "I'm still FOO"; $val
# => ╭─────┬───────────────╮
# => │ FOO │ I'm still FOO │
# => ╰─────┴───────────────╯
```
For `update`, case-insensitive is case-preserving.
```nushell
{FOO: 1} | update foo! { $in + 1 }
# => ╭─────┬───╮
# => │ FOO │ 2 │
# => ╰─────┴───╯
```
`insert` can insert values into nested values so accessing into existing
columns is case-insensitive, but creating new columns uses the cell-path
as it is.
So `insert foo! ...` and `insert FOO! ...` would work exactly as they do
without `!`
```nushell
{FOO: {quox: 0}}
# => ╭─────┬──────────────╮
# => │ │ ╭──────┬───╮ │
# => │ FOO │ │ quox │ 0 │ │
# => │ │ ╰──────┴───╯ │
# => ╰─────┴──────────────╯
{FOO: {quox: 0}} | insert foo.bar 1
# => ╭─────┬──────────────╮
# => │ │ ╭──────┬───╮ │
# => │ FOO │ │ quox │ 0 │ │
# => │ │ ╰──────┴───╯ │
# => │ │ ╭─────┬───╮ │
# => │ foo │ │ bar │ 1 │ │
# => │ │ ╰─────┴───╯ │
# => ╰─────┴──────────────╯
{FOO: {quox: 0}} | insert foo!.bar 1
# => ╭─────┬──────────────╮
# => │ │ ╭──────┬───╮ │
# => │ FOO │ │ quox │ 0 │ │
# => │ │ │ bar │ 1 │ │
# => │ │ ╰──────┴───╯ │
# => ╰─────┴──────────────╯
```
`upsert` is tricky, depending on the input, the data might end up with
different column names in rows. We can either forbid case-insensitive
cell-paths for `upsert` or trust the user to keep their data in a
sensible shape.
This would be a breaking change as it would make existing cell-path
accesses case-sensitive, however the case-sensitivity is already
inconsistent and any attempt at making it consistent would be a breaking
change.
> What about `$env`?
1. Initially special case it so it keeps its current behavior.
2. Accessing environment variables with non-matching paths gives a
deprecation warning urging users to either use exact casing or use the
new explicit case-sensitivity syntax
3. Eventuall remove `$env`'s special case, making `$env` accesses
case-sensitive by default as well.
> `$env.ENV_CONVERSIONS`?
In addition to `from_string` and `to_string` add an optional field to
opt into case insensitive/preserving behavior.
# User-Facing Changes
- `get`, `where` and other previously case-insensitive commands are now
case-sensitive by default.
- `get`'s `--sensitive` flag removed, similar to `--ignore-errors` there
is now an `--ignore-case` flag that treats all parts of the cell-path as
case-insensitive.
- Users can explicitly choose the case case-sensitivity of cell-path
accesses or commands.
# Tests + Formatting
Existing tests required minimal modification. ***However, new tests are
not yet added***.
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
- Update the website to include the new syntax
- Update [tree-sitter-nu](https://github.com/nushell/tree-sitter-nu)
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`polars unique` currently only operates on entire dataframes. This PR
seeks to expand this command to handle expressions as well. See
examples:
```nushell
Returns unique values in a subset of lazyframe columns
> [[a]; [2] [1] [2]]
| polars into-lazy
| polars select (polars col a | polars unique)
| polars collect
╭───┬───╮
│ # │ a │
├───┼───┤
│ 0 │ 1 │
│ 1 │ 2 │
╰───┴───╯
Returns unique values in a subset of lazyframe columns
> [[a]; [2] [1] [2]]
| polars into-lazy
| polars select (polars col a | polars unique --maintain-order)
| polars collect
╭───┬───╮
│ # │ a │
├───┼───┤
│ 0 │ 2 │
│ 1 │ 1 │
╰───┴───╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No breaking changes. Users have the added option to use `polars unique`
in an expressions context.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Example tests have been added to `polars unique`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Closes#14469
# Description
- ~~Implement the ``--unit`` conversion in "into int" command~~
- New ``ShellError::InvalidUnit`` unit if users enter wrong units
- Made ``ShellError::CantConvertToDuration`` more generic: became
``CantConvertToUnit``
- Tried to improve the way we parse units and get the supported units.
It's not complete, though, I will continue this refactoring in another
PR. But I already did some small refactorings in the "format duration"
and "format filesize" commands
- Add tests for "format filesize" and "format duration"
# User-Facing Changes
```nu
~> 1MB | format filesize sec
Error: nu:🐚:invalid_unit
× Invalid unit
╭─[entry #7:1:23]
1 │ 1MB | format filesize sec
· ─┬─
· ╰── encountered here
╰────
help: Supported units are: B, kB, MB, GB, TB, PB, EB, KiB, MiB, GiB, TiB, PiB, EiB
```
# Description
In preparation for https://github.com/nushell/reedline/pull/798, which
adds a new field to `Suggestion`, this PR makes sure that `Suggestion`s
are created using `..Default::default()` inside
`attribute_completions.rs`.
# User-Facing Changes
None
# Tests + Formatting
None
# After Submitting
# Description
This PR adds lazy closure evaluation to the `default` command (closes
#14160).
- For non-closure values and without providing a column name, `default`
acts the same as before
- The user can now provide multiple column names to populate if empty
- If the user provides a column name, the input must be a record or
list, otherwise an error is created.
- The user can now provide a closure as a default value
- This closure is run without any arguments or input
- The closure is never evaluated if the value isn't needed
- Even when column names are supplied, the closure is only run once (and
cached to prevent re-calling it)
For example:
```nushell
> default { 1 + 2 } # => 3
> null | default 3 a # => previously `null`, now errors
> 1 | default { sleep 5sec; 3 } # => `1`, without waiting 5 seconds
> let optional_var = null; $optional_var | default { input 'Enter value: ' } # => Returns user input
> 5 | default { input 'Enter value: ' } # => `5`, without prompting user
> ls | default { sleep 5sec; 'N/A' } name # => No-op since `name` column is never empty
> ls | default { sleep 5sec; 'N/A' } foo bar # => creates columns `foo` and `bar`; only takes 5 seconds since closure result is cached
# Old behavior is the same
> [] | default 'foo' # => []
> [] | default --empty 'foo' # => 'foo'
> default 5 # => 5
```
# User-Facing Changes
- Users can add default values to multiple columns now.
- Users can now use closures as the default value passed to `default`.
- To return a closure, the user must wrap the closure they want to
return inside another closure, which will be run (`default { $my_closure
}`).
# Tests + Formatting
All tests pass.
# After Submitting
---------
Co-authored-by: 132ikl <132@ikl.sh>
# Description
This PR fixes a bug where powershell scripts were only allowed to be
executed if they were in the directory that you executed them from. This
fix allows the scripts to be anywhere in the path.
closes#15759
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- fixes#14896
- related to #15163
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes the presence of ansi color codes in empty tables, when
`$env.config.table.show_empty = true` and `$env.config.use_ansi_coloring
= false`
# User-Facing Changes
Empty tables respect `$env.config.use_ansi_coloring`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a test for this case.
# After Submitting
- fixes#15731
# Description
Existing bare word string interpolation only works if the string doesn't
start with a subxpression.
```nushell
echo fork(2)
# => fork2
echo (2)fork
# => Error: nu::parser::unclosed_delimiter
# =>
# => × Unclosed delimiter.
# => ╭─[entry #25:1:13]
# => 1 │ echo (2)fork
# => ╰────
```
This PR lifts that restriction.
```nushell
echo fork(2)
# => fork2
echo (2)fork
# => 2fork
```
This was first brought to my attention on discord with the following
command failing to parse.
```nushell
docker run -u (id -u):(id -g)
```
It now works.
# User-Facing Changes
# Tests + Formatting
No existing test broke or required tweaking. Additional tests covering
this case was added.
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
# Description
Fixes#15128. Allows `path join` to use ByteStream pipeline data to join
on if it's coercible to string. Binary ByteStream input still results in
an error. Tested with `^$nu.current-exe -c '$nu.config-path' | path join
foo` and `^tar.exe -c assets/nu_logo.ico | path join foo`
# User-Facing Changes
If an external command returns a path, users would previously need to
use `^show-path-cmd | collect | path join 'foo'`, now they can drop the
intermediate `collect`.
Even with some experience in Nushell I did not find information about
the match syntax for alternative value matches. The `match` command help
does not mention it at all. I suggest we add an example.
Previously, the examples only had "advanced" matching operations. It
seems appropriate to start with the simplest one: Matching by value.
Add both of these examples.
# User-Facing Changes
`help match` and the [command reference
docs](https://www.nushell.sh/commands/docs/match.html) now have examples
for
* simple value matching
* alternative value matching
Bumps [miette](https://github.com/zkat/miette) from 7.5.0 to 7.6.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/zkat/miette/blob/main/CHANGELOG.md">miette's
changelog</a>.</em></p>
<blockquote>
<h2>7.6.0 (2025-04-27)</h2>
<h3>Bug Fixes</h3>
<ul>
<li><strong>graphical:</strong> prevent leading newline when no
link/code (<a
href="https://redirect.github.com/zkat/miette/issues/418">#418</a>) (<a
href="1e1938a099">1e1938a0</a>)</li>
<li><strong>clippy:</strong> elide lifetimes (<a
href="https://redirect.github.com/zkat/miette/issues/423">#423</a>) (<a
href="9ba6fad769">9ba6fad7</a>)</li>
<li><strong>highlight:</strong> increase syntax highlighter config
priority (<a
href="https://redirect.github.com/zkat/miette/issues/424">#424</a>) (<a
href="58d9f12411">58d9f124</a>)</li>
<li><strong>deps:</strong> miette can now be used without syn (<a
href="https://redirect.github.com/zkat/miette/issues/436">#436</a>) (<a
href="521ef91f77">521ef91f</a>)</li>
</ul>
<h3>Features</h3>
<ul>
<li><strong>graphical:</strong> support rendering related diagnostics as
nested (<a
href="https://redirect.github.com/zkat/miette/issues/417">#417</a>) (<a
href="771a07519f">771a0751</a>)</li>
<li><strong>labels:</strong> add support for disabling the primary label
line/col information (<a
href="https://redirect.github.com/zkat/miette/issues/419">#419</a>) (<a
href="f2ef693d1c">f2ef693d</a>)</li>
<li><strong>deps:</strong> update <code>thiserror</code> from 1.0.56 to
2.0.11 (<a
href="https://redirect.github.com/zkat/miette/issues/426">#426</a>) (<a
href="59c81617de">59c81617</a>)</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/zkat/miette/commits/miette-derive-v7.6.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Fixes#15716
# Description
Returns None early if the input iterator is depleted.
# User-Facing Changes
Should be none
# Tests + Formatting
+1
# After Submitting
A small optimization;
Must be measurable on large tables.
In case of `scope commands` for me seems like a bit faster in debug
(~100ms).
But I've had like a few runs.
If someone is interested to check if it's any faster would be nice to
see it :)
cc: @fdncred
# Description
Fixes#9942
This adds a new `--minified` flag to `to nuon` which removes all
possible white space. I added an example test to demonstrate the
functionality.
# User-Facing Changes
New flag becomes available to the user.
ref #15653
Thanks for reproducible.
So @Bahex indeed padding was not properly handled.
I am not sure whether there's more issues related to your examples
@fdncred but I seems like don't get them.
Also added a test for future regressions (well to be honest didn't
tested that it's failing on main but at least at may catch something)
PS: Also got some panic related to #15138 (which PR fixed) :(
There's nothing on my end stopping me releasing a WASM issue fix; I just
sort of always worrying with releasing a `patch` (`0.0.x`)......and
there's 1 quite big thing I wanna do before a minor release.......
# Description
See [this
discussion](https://discord.com/channels/601130461678272522/1353434388938883143/1360664695962341647)
on discord
Goal: as the AST evaluator isn't supported anymore, I removed the body
of the "run" methods of some commands that were actually never run
because the IR is used instead.
Note: the code inside the "run_const" methods seems to be run, so I left
it.
Cc @132ikl
# User-Facing Changes
None
# Tests + Formatting
I didn't do any manual testing, I just ran the tests
# After Submitting
Nothing required I think
Bumps [quickcheck_macros](https://github.com/BurntSushi/quickcheck) from
1.0.0 to 1.1.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d58e3cffb7"><code>d58e3cf</code></a>
quickcheck_macros-1.1.0</li>
<li><a
href="03ab585865"><code>03ab585</code></a>
Fix README examples</li>
<li><a
href="826f10baa1"><code>826f10b</code></a>
Add shrinking support for arrays (<a
href="https://redirect.github.com/BurntSushi/quickcheck/issues/330">#330</a>)</li>
<li><a
href="87b46b90ec"><code>87b46b9</code></a>
Update some links (<a
href="https://redirect.github.com/BurntSushi/quickcheck/issues/332">#332</a>)</li>
<li><a
href="a0216c932f"><code>a0216c9</code></a>
Revert <code>Gen</code> renaming, rename <code>gen</code> method</li>
<li><a
href="2c2cd21935"><code>2c2cd21</code></a>
Update to rand 0.9</li>
<li><a
href="9ddbbd6b68"><code>9ddbbd6</code></a>
deps: update to syn 2.0 (<a
href="https://redirect.github.com/BurntSushi/quickcheck/issues/317">#317</a>)</li>
<li><a
href="238f340a36"><code>238f340</code></a>
Bump MSRV to 1.71</li>
<li><a
href="32d7bc4edf"><code>32d7bc4</code></a>
Upgrade to 2021 edition</li>
<li><a
href="44b81bebcf"><code>44b81be</code></a>
deps: update to env_logger 0.11 (<a
href="https://redirect.github.com/BurntSushi/quickcheck/issues/327">#327</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/BurntSushi/quickcheck/compare/quickcheck_macros-1.0.0...quickcheck_macros-1.1.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
Move clear jobs to _after_ traversing them, in order to kill them.
# User-Facing Changes
None
# Tests + Formatting
It looks like it's only used once, in crates/nu-engine/src/exit.rs
Fixes#15675
I've added relevant test cases to ensure coverage of the identified bug.
The issue originated from my crate and pertains to the bracoxide
dependency—a bug I’ve internally referred to as IgnorantNumbers. I’ve
submitted a fix and updated the bracoxide dependency accordingly.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
closes#15381
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds a new table mode called `single`, it looks like the `heavy` mode,
but the key difference is that it uses thinner lines. I decided on the
name `single` because it's one of the border styles Neovim uses, and
they look practically the same.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New config option:
```nushell
$env.config.table.mode = 'single'
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added new tests in `crates/nu-table/tests/style.rs` to cover the single
table mode.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
A bug introduced by #14920
When `use module.nu` is called, all exported constants defined in it are
added to the scope.
# Description
On the branch of empty arguments, the constant var_id vector should be
empty, only constant_values (for `$module.foo` access) are injected.
# User-Facing Changes
# Tests + Formatting
~todo!~
adjusted
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
I was interested in how nu-shell handles glibc, especially older
versions of it. I figured out from the docs that ubuntu 20.04 is
utilized. However, in reality, github has deprecated ubuntu 20.04, and
the code for ci.yaml in github workflow clearly states that it is 22.04.
This is just a minor doc update to clarify forgotten information
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR seeks to port over the `*_horizontal` commands in polars
rust/python (e.g.,
https://docs.pola.rs/api/python/stable/reference/expressions/api/polars.sum_horizontal.html),
which aggregate across multiple columns (as opposed to rows). See below
for several examples.
```nushell
# Horizontal sum across two columns (ignore nulls by default)
> [[a b]; [1 2] [2 3] [3 4] [4 5] [5 null]]
| polars into-df
| polars select (polars horizontal sum a b)
| polars collect
╭───┬─────╮
│ # │ sum │
├───┼─────┤
│ 0 │ 3 │
│ 1 │ 5 │
│ 2 │ 7 │
│ 3 │ 9 │
│ 4 │ 5 │
╰───┴─────╯
# Horizontal sum across two columns while accounting for nulls
> [[a b]; [1 2] [2 3] [3 4] [4 5] [5 null]]
| polars into-df
| polars select (polars horizontal sum a b --nulls)
| polars collect
╭───┬─────╮
│ # │ sum │
├───┼─────┤
│ 0 │ 3 │
│ 1 │ 5 │
│ 2 │ 7 │
│ 3 │ 9 │
│ 4 │ │
╰───┴─────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No breaking changes. Users have access to a new command, `polars
horizontal`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Example tests were added to `polars horizontal`.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
While working on something else, I noticed that
`Value::follow_cell_path` receives `self`.
While it would be ideal for the signature to be `(&'a self, cell_path)
-> &'a Value`, that's not possible because:
1. Selecting a row from a list and field from a record can be done with
a reference but selecting a column from a table requires creating a new
list.
2. `Value::Custom` returns new `Value`s when indexed.
So the signature becomes `(&'a self, cell_path) -> Cow<'a, Value>`.
Another complication that arises is, once a new `Value` is created, and
it is further indexed, the `current` variable
1. can't be `&'a Value`, as the lifetime requirement means it can't
refer to local variables
2. _shouldn't_ be `Cow<'a, Value>`, as once it becomes an owned value,
it can't be borrowed ever again, as `current` is derived from its
previous value in further iterations. So once it's owned, it can't be
indexed by reference, leading to more clones
We need `current` to have _two_ possible lifetimes
1. `'out`: references derived from `&self`
2. `'local`: references derived from an owned value stored in a local
variable
```rust
enum MultiLife<'out, 'local, T>
where
'out: 'local,
T: ?Sized,
{
Out(&'out T),
Local(&'local T),
}
```
With `current: MultiLife<'out, '_, Value>`, we can traverse values with
minimal clones, and we can transform it to `Cow<'out, Value>` easily
(`MultiLife::Out -> Cow::Borrowed, MultiLife::Local -> Cow::Owned`) to
return it
# User-Facing Changes
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Bahex <17417311+Bahex@users.noreply.github.com>
- A few days back I've got this idea regarding recalculus of width.
Now it calculates step by step.
So 1 loop over all data was removed.
All though there's full recalculation in case of `header_on_border`
😞 (can be fixed..... but I decided to be short)
In perfect world it also shall be refactored ......
- Also have done small refactoring to switch build table from
`Vec<Vec<_>>>` to table itself. To hide internals (kind of still there's
things which I don't like).
It touched the `--expand` algorithm lightly you can see the tests
changes.
- And when doing that noticed one more opportunity, to remove HashMap
usage and directly use `tabled::ColoredConfig`. Which reduces copy
operations and allocations.
- And fixed a small issue where trailing column being using deleted
column styles.
To conclude optimizations;
I did small testing and it's not slower.
But I didn't get the faster results either.
But I believe it must be faster well in all cases, I think maybe bigger
tables must be tested.
Maybe someone could have a few runs to compare performance.
cc: @fdncred
# Description
When first using `http get`, I was confused that all the examples used a
list for headers, leading me to believe this was the only way, and it
seemed a little weird having records in the language. Then, I found out
that you can indeed use record, so I changed the example to show this
behavior in a way users can find. There still is another examples that
uses a list so there should be no problem there.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
remove j
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
2025-05-01 06:19:32 -05:00
987 changed files with 17351 additions and 10134 deletions
Hey, just a bot checking in! You edited files related to the configuration.
If you changed any of the default values or added a new config option, don't forget to update the [`doc_config.nu`](https://github.com/nushell/nushell/blob/main/crates/nu-utils/src/default_files/doc_config.nu) which documents the options for our users including the defaults provided by the Rust implementation.
If you didn't make a change here, you can just ignore me.
@ -31,7 +31,7 @@ The review process can be summarized as follows:
1. You want to make some change to Nushell that is more involved than simple bug-fixing.
2. Go to [Discord](https://discordapp.com/invite/NtAbbGn) or a [GitHub issue](https://github.com/nushell/nushell/issues/new/choose) and chat with some core team members and/or other contributors about it.
3. After getting a green light from the core team, implement the feature, open a pull request (PR) and write a concise but comprehensive description of the change.
4. If your PR includes any use-facing features (such as adding a flag to a command), clearly list them in the PR description.
4. If your PR includes any user-facing features (such as adding a flag to a command), clearly list them in the PR description.
5. Then, core team members and other regular contributors will review the PR and suggest changes.
6. When we all agree, the PR will be merged.
7. If your PR includes any user-facing features, make sure the changes are also reflected in [the documentation](https://github.com/nushell/nushell.github.io) after the PR is merged.
If no input is provided, will import all history items from existing history in the other format: if current history is stored in sqlite, it will store it in plain text and vice versa.
@ -48,8 +48,7 @@ Note that history item IDs are ignored when importing from file."#
vec