mirror of
https://github.com/nushell/nushell.git
synced 2024-11-22 08:23:24 +01:00
00709fc5bd
Updated summary for commit [612e0e2
](612e0e2160
) - While folks are welcome to read through the entire comments, the core information is summarized here. # Description This PR drastically improves startup times of Nushell by only parsing a single submodule of the Standard Library that provides the `banner` and `pwd` commands. All other Standard Library commands and submodules are parsed when imported by the user. This cuts startup times by more than 60%. At the moment, we have stopped adding to `std-lib` because every addition adds a small amount to the Nushell startup time. With this change, we should once again be able to allow new functionality to be added to the Standard Library without it impacting `nu` startup times. # User-Facing Changes * Nushell now starts about 60% faster * Breaking change: The `dirs` (Shells) aliases will return a warning message that it will not be auto-loaded in the following release, along with instructions on how to restore it (and disable the message) * The `use std <submodule> *` syntax is available for convenience, but should be avoided in scripts as it parses the entire `std` module and all other submodules and places it in scope. The correct syntax to *just* load a submodule is `use std/<submodule> *` (asterisk optional). The slash is important. This will be documented. * `use std *` can be used for convenience to load all of the library but still incurs the full loading-time. * `std/dirs`: Semi-breaking change. The `dirs` command replaces the `show` command. This is more in line with the directory-stack functionality found in other shells. Existing users will not be impacted by this as the alias (`shells`) remains the same. * Breaking-change: Technically a breaking change, but probably only impacts maintainers of `std`. The virtual path for the standard library has changed. It could previously be imported using its virtual path (and technically, this would have been the correct way to do it): ```nu use NU_STDLIB_VIRTUAL_DIR/std ``` The path is now simply `std/`: ```nu use std ``` All submodules have moved accordingly. # Timings Comparisons below were made: * In a temporary, clean config directory using `$env.XDG_CONFIG_HOME = (mktemp -d)`. * `nu` was run with a release build * `nu` was run one time to generate the default `config.nu` (etc.) files - Otherwise timings would include the user-prompt * The shell was exited and then restarted several times to get timing samples (Note: Old timings based on 0.97 rather than 0.98, but in the range of being accurate) | Scenario | `$nu.startup-time` | | --- | --- | | 0.97.2 ([aaaab8e
](aaaab8e070
)) Without this PR | 23ms - 24ms | | This PR with deprecated commands | 9ms - <11ms | | This PR after deprecated commands are removed in following release | 8ms - <10ms | | Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms | | Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms | | Final PR (remove deprecated), using `--no-config-file --no-std-lib` | 1ms - 1.5ms | *These last two timings point to the opportunity for further optimization (see comment in thread below (will link once I write it).* # Implementation details for future maintenance * `use std banner` is a ridiculously deceptive call. That call parses and imports *all* of `std` into scope. Simply replacing it with `use std/core *` is essentially what saves ~14-15ms. This *only* imports the submodule with the `banner` and `pwd` commands. * From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was used as a prefix was so that there wouldn't be an issue if a user had a `./std/mod.nu` in the current directory. This does **not** appear to be an issue. After removing the prefix, I tested with both a relative module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases the *internal* `std` still took precedence. * By removing the prefix, users can now `use std` (and variants) without requiring that it already be parsed and in scope. * In the next release, we'll stop autoloading the `dirs` (shells) functionality. While this only costs an additional 1-1.5ms, I think it's better moved to the `config.nu` where the user can optionally remove it. The main reason is its use of aliases (which have also caused issues) - The `n`, `p`, and `g` short-commands are valuable real-estate, and users may want to map these to something else. For this release, there's an `deprecated_dirs` module that is still autoloaded. As with the top-level commands, use of these will give a deprecation warning with instructions on how to handle going forward. To help with this, moved the aliases to their own submodule inside the `dirs` module. * Also sneaks in a small change where the top-level `dirs` command is now the replacement for `dirs show` * Fixed a double-import of `assert` in `dirs.nu` * The `show_banner` step is replaced with simply `banner` rather than re-importing it. * A `virtual_path` may now be referenced with either a forward-slash or a backward-slash on Windows. This allows `use std/<submodule>` to work on all platforms. # Performance side-notes: * Future parsing and/or IR improvements should improve performance even further. * While the existing load time penalty of `std-lib` was not noticeable on many systems, Nushell runs on a wide-variety of hardware and OS platforms. Slower platforms will naturally see a bigger jump in performance here. For users starting multiple Nushell sessions frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended to keep total startup time (including user configuration) under ~250ms. # Tests + Formatting * All tests are green * Updated tests: - Removed the test that confirmed that `std` was loaded (since we don't). - Removed the `shells` test since it is not autoloaded. Main `dirs.nu` functionality is tested through `stdlib-test`. - Many tests assumed that the library was fully loaded, because it was (even though we didn't intend for it to be). Fixed those tests. - Tests now import only the necessary submodules (e.g., `use std/assert`, rather than `use std assert`) - Some tests *thought* they were loading `std/log`, but were doing so improperly. This was masked by the now-fixed "load-everything-into-scope bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being inherited from the calling process, but would fail in the "clean" GitHub CI environment. These tests have also been fixed. * Added additional tests for the changes # After Submitting Will update the Standard Library doc page
248 lines
5.9 KiB
Rust
248 lines
5.9 KiB
Rust
use super::support::Trusted;
|
|
|
|
use nu_test_support::fs::Stub::FileWithContent;
|
|
use nu_test_support::playground::Playground;
|
|
use nu_test_support::{nu, nu_repl_code, nu_with_std};
|
|
use pretty_assertions::assert_eq;
|
|
use serial_test::serial;
|
|
|
|
#[test]
|
|
fn env_shorthand() {
|
|
let actual = nu!("
|
|
FOO=bar echo $env.FOO
|
|
");
|
|
assert_eq!(actual.out, "bar");
|
|
}
|
|
|
|
#[test]
|
|
fn env_shorthand_with_equals() {
|
|
let actual = nu!("
|
|
RUST_LOG=my_module=info $env.RUST_LOG
|
|
");
|
|
assert_eq!(actual.out, "my_module=info");
|
|
}
|
|
|
|
#[test]
|
|
fn env_shorthand_with_interpolation() {
|
|
let actual = nu!(r#"
|
|
let num = 123
|
|
FOO=$"($num) bar" echo $env.FOO
|
|
"#);
|
|
assert_eq!(actual.out, "123 bar");
|
|
}
|
|
|
|
#[test]
|
|
fn env_shorthand_with_comma_equals() {
|
|
let actual = nu!("
|
|
RUST_LOG=info,my_module=info $env.RUST_LOG
|
|
");
|
|
assert_eq!(actual.out, "info,my_module=info");
|
|
}
|
|
|
|
#[test]
|
|
fn env_shorthand_with_comma_colons_equals() {
|
|
let actual = nu!("
|
|
RUST_LOG=info,my_module=info,lib_crate::lib_mod=trace $env.RUST_LOG
|
|
");
|
|
assert_eq!(actual.out, "info,my_module=info,lib_crate::lib_mod=trace");
|
|
}
|
|
|
|
#[test]
|
|
fn env_shorthand_multi_second_with_comma_colons_equals() {
|
|
let actual = nu!("
|
|
FOO=bar RUST_LOG=info,my_module=info,lib_crate::lib_mod=trace $env.FOO + $env.RUST_LOG
|
|
");
|
|
assert_eq!(
|
|
actual.out,
|
|
"barinfo,my_module=info,lib_crate::lib_mod=trace"
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn env_shorthand_multi_first_with_comma_colons_equals() {
|
|
let actual = nu!("
|
|
RUST_LOG=info,my_module=info,lib_crate::lib_mod=trace FOO=bar $env.FOO + $env.RUST_LOG
|
|
");
|
|
assert_eq!(
|
|
actual.out,
|
|
"barinfo,my_module=info,lib_crate::lib_mod=trace"
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn env_shorthand_multi() {
|
|
let actual = nu!("
|
|
FOO=bar BAR=baz $env.FOO + $env.BAR
|
|
");
|
|
assert_eq!(actual.out, "barbaz");
|
|
}
|
|
|
|
#[test]
|
|
fn env_assignment() {
|
|
let actual = nu!(r#"
|
|
$env.FOOBAR = "barbaz"; $env.FOOBAR
|
|
"#);
|
|
assert_eq!(actual.out, "barbaz");
|
|
}
|
|
|
|
#[test]
|
|
fn env_assignment_with_if() {
|
|
let actual = nu!(r#"$env.FOOBAR = if 3 == 4 { "bar" } else { "baz" }; $env.FOOBAR"#);
|
|
assert_eq!(actual.out, "baz");
|
|
}
|
|
|
|
#[test]
|
|
fn env_assignment_with_match() {
|
|
let actual = nu!(r#"$env.FOOBAR = match 1 { 1 => { 'yes!' }, _ => { 'no!' } }; $env.FOOBAR"#);
|
|
assert_eq!(actual.out, "yes!");
|
|
}
|
|
|
|
#[test]
|
|
fn mutate_env_file_pwd_env_var_fails() {
|
|
let actual = nu!("$env.FILE_PWD = 'foo'");
|
|
|
|
assert!(actual.err.contains("automatic_env_var_set_manually"));
|
|
}
|
|
|
|
#[test]
|
|
fn load_env_file_pwd_env_var_fails() {
|
|
let actual = nu!("load-env { FILE_PWD : 'foo' }");
|
|
|
|
assert!(actual.err.contains("automatic_env_var_set_manually"));
|
|
}
|
|
|
|
#[test]
|
|
fn load_env_pwd_env_var_fails() {
|
|
let actual = nu!("load-env { PWD : 'foo' }");
|
|
|
|
assert!(actual.err.contains("automatic_env_var_set_manually"));
|
|
}
|
|
|
|
#[test]
|
|
fn passes_with_env_env_var_to_external_process() {
|
|
let actual = nu!("
|
|
with-env { FOO: foo } {nu --testbin echo_env FOO}
|
|
");
|
|
assert_eq!(actual.out, "foo");
|
|
}
|
|
|
|
#[test]
|
|
fn hides_environment_from_child() {
|
|
let actual = nu!(r#"
|
|
$env.TEST = 1; ^$nu.current-exe -c "hide-env TEST; ^$nu.current-exe -c '$env.TEST'"
|
|
"#);
|
|
assert!(actual.out.is_empty());
|
|
assert!(actual.err.contains("column_not_found") || actual.err.contains("name_not_found"));
|
|
}
|
|
|
|
#[test]
|
|
fn has_file_pwd() {
|
|
Playground::setup("has_file_pwd", |dirs, sandbox| {
|
|
sandbox.with_files(&[FileWithContent("spam.nu", "$env.FILE_PWD")]);
|
|
|
|
let actual = nu!(cwd: dirs.test(), "nu spam.nu");
|
|
|
|
assert!(actual.out.ends_with("has_file_pwd"));
|
|
})
|
|
}
|
|
|
|
#[test]
|
|
fn has_file_loc() {
|
|
Playground::setup("has_file_pwd", |dirs, sandbox| {
|
|
sandbox.with_files(&[FileWithContent("spam.nu", "$env.CURRENT_FILE")]);
|
|
|
|
let actual = nu!(cwd: dirs.test(), "nu spam.nu");
|
|
|
|
assert!(actual.out.ends_with("spam.nu"));
|
|
})
|
|
}
|
|
|
|
// FIXME: autoenv not currently implemented
|
|
#[ignore]
|
|
#[test]
|
|
#[serial]
|
|
fn passes_env_from_local_cfg_to_external_process() {
|
|
Playground::setup("autoenv_dir", |dirs, sandbox| {
|
|
sandbox.with_files(&[FileWithContent(
|
|
".nu-env",
|
|
r#"[env]
|
|
FOO = "foo"
|
|
"#,
|
|
)]);
|
|
|
|
let actual = Trusted::in_path(&dirs, || {
|
|
nu!(cwd: dirs.test(), "
|
|
nu --testbin echo_env FOO
|
|
")
|
|
});
|
|
|
|
assert_eq!(actual.out, "foo");
|
|
})
|
|
}
|
|
|
|
#[test]
|
|
fn hides_env_in_block() {
|
|
let inp = &[
|
|
"$env.foo = 'foo'",
|
|
"hide-env foo",
|
|
"let b = {|| $env.foo }",
|
|
"do $b",
|
|
];
|
|
|
|
let actual = nu!(&inp.join("; "));
|
|
let actual_repl = nu!(nu_repl_code(inp));
|
|
|
|
assert!(actual.err.contains("column_not_found"));
|
|
assert!(actual_repl.err.contains("column_not_found"));
|
|
}
|
|
|
|
#[test]
|
|
fn env_var_not_var() {
|
|
let actual = nu!("
|
|
echo $PWD
|
|
");
|
|
assert!(actual.err.contains("use $env.PWD instead of $PWD"));
|
|
}
|
|
|
|
#[test]
|
|
fn env_var_case_insensitive() {
|
|
let actual = nu!("
|
|
$env.foo = 111
|
|
print $env.Foo
|
|
$env.FOO = 222
|
|
print $env.foo
|
|
");
|
|
assert!(actual.out.contains("111"));
|
|
assert!(actual.out.contains("222"));
|
|
}
|
|
|
|
#[test]
|
|
fn std_log_env_vars_are_not_overridden() {
|
|
let actual = nu_with_std!(
|
|
envs: vec![
|
|
("NU_LOG_FORMAT".to_string(), "%MSG%".to_string()),
|
|
("NU_LOG_DATE_FORMAT".to_string(), "%Y".to_string()),
|
|
],
|
|
r#"
|
|
use std/log
|
|
print -e $env.NU_LOG_FORMAT
|
|
print -e $env.NU_LOG_DATE_FORMAT
|
|
log error "err"
|
|
"#
|
|
);
|
|
assert_eq!(actual.err, "%MSG%\n%Y\nerr\n");
|
|
}
|
|
|
|
#[test]
|
|
fn std_log_env_vars_have_defaults() {
|
|
let actual = nu_with_std!(
|
|
r#"
|
|
use std/log
|
|
print -e $env.NU_LOG_FORMAT
|
|
print -e $env.NU_LOG_DATE_FORMAT
|
|
"#
|
|
);
|
|
assert!(actual.err.contains("%MSG%"));
|
|
assert!(actual.err.contains("%Y-"));
|
|
}
|