nushell/crates/nu-term-grid/src/grid.rs

// Thanks to https://github.com/ogham/rust-term-grid for making this available

//! This library arranges textual data in a grid format suitable for
//! fixed-width fonts, using an algorithm to minimise the amount of space
//! needed. For example:
//!
//! ```rust
//! use nu_term_grid::grid::{Grid, GridOptions, Direction, Filling, Cell};
//!
//! let mut grid = Grid::new(GridOptions {
//!     filling:    Filling::Spaces(1),
//!     direction:  Direction::LeftToRight,
//! });
//!
//! for s in &["one", "two", "three", "four", "five", "six", "seven",
//!            "eight", "nine", "ten", "eleven", "twelve"]
//! {
//!     grid.add(Cell::from(*s));
//! }
//!
//! println!("{}", grid.fit_into_width(24).unwrap());
//! ```
//!
//! Produces the following tabular result:
//!
//! ```text
//! one  two three  four
//! five six seven  eight
//! nine ten eleven twelve
//! ```
//!
//!
//! ## Creating a grid
//!
//! To add data to a grid, first create a new [`Grid`] value, and then add
//! cells to them with the `add` function.
//!
//! There are two options that must be specified in the [`GridOptions`] value
//! that dictate how the grid is formatted:
//!
//! - `filling`: what to put in between two columns — either a number of
//!    spaces, or a text string;
//! - `direction`, which specifies whether the cells should go along
//!    rows, or columns:
//!     - `Direction::LeftToRight` starts them in the top left and
//!        moves *rightwards*, going to the start of a new row after reaching the
//!        final column;
//!     - `Direction::TopToBottom` starts them in the top left and moves
//!        *downwards*, going to the top of a new column after reaching the final
//!        row.
//!
//!
//! ## Displaying a grid
//!
//! When display a grid, you can either specify the number of columns in advance,
//! or try to find the maximum number of columns that can fit in an area of a
//! given width.
//!
//! Splitting a series of cells into columns — or, in other words, starting a new
//! row every <var>n</var> cells — is achieved with the [`fit_into_columns`] function
//! on a `Grid` value. It takes as its argument the number of columns.
//!
//! Trying to fit as much data onto one screen as possible is the main use case
//! for specifying a maximum width instead. This is achieved with the
//! [`fit_into_width`] function. It takes the maximum allowed width, including
//! separators, as its argument. However, it returns an *optional* [`Display`]
//! value, depending on whether any of the cells actually had a width greater than
//! the maximum width! If this is the case, your best bet is to just output the
//! cells with one per line.
//!
//!
//! ## Cells and data
//!
//! Grids to not take `String`s or `&str`s — they take [`Cell`] values.
//!
//! A **Cell** is a struct containing an individual cell’s contents, as a string,
//! and its pre-computed length, which gets used when calculating a grid’s final
//! dimensions. Usually, you want the *Unicode width* of the string to be used for
//! this, so you can turn a `String` into a `Cell` with the `.into()` function.
//!
//! However, you may also want to supply your own width: when you already know the
//! width in advance, or when you want to change the measurement, such as skipping
//! over terminal control characters. For cases like these, the fields on the
//! `Cell` values are public, meaning you can construct your own instances as
//! necessary.
//!
//! [`Cell`]: ./struct.Cell.html
//! [`Display`]: ./struct.Display.html
//! [`Grid`]: ./struct.Grid.html
//! [`fit_into_columns`]: ./struct.Grid.html#method.fit_into_columns
//! [`fit_into_width`]: ./struct.Grid.html#method.fit_into_width
//! [`GridOptions`]: ./struct.GridOptions.html

use std::borrow::Cow;
use std::cmp::max;
use std::fmt;
use std::iter::repeat;
use strip_ansi_escapes;
use unicode_width::UnicodeWidthStr;

/// Removes ANSI escape codes and some ASCII control characters
///
/// Keeps `\n` removes `\r`, `\t` etc.
///
/// If parsing fails silently returns the input string
fn strip_ansi(string: &str) -> Cow<str> {
    // Check if any ascii control character except LF(0x0A = 10) is present,
    // which will be stripped. Includes the primary start of ANSI sequences ESC
    // (0x1B = decimal 27)
    if string.bytes().any(|x| matches!(x, 0..=9 | 11..=31)) {
        if let Ok(stripped) = strip_ansi_escapes::strip(string) {
            if let Ok(new_string) = String::from_utf8(stripped) {
                return Cow::Owned(new_string);
            }
        }
    }
    // Else case includes failures to parse!
    Cow::Borrowed(string)
}

fn unicode_width_strip_ansi(astring: &str) -> usize {
    strip_ansi(astring).width()
}

/// Alignment indicate on which side the content should stick if some filling
/// is required.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Alignment {
    /// The content will stick to the left.
    Left,

    /// The content will stick to the right.
    Right,
}

/// A **Cell** is the combination of a string and its pre-computed length.
///
/// The easiest way to create a Cell is just by using `string.into()`, which
/// uses the **unicode width** of the string (see the `unicode_width` crate).
/// However, the fields are public, if you wish to provide your own length.
#[derive(PartialEq, Eq, Debug, Clone)]
pub struct Cell {
    /// The string to display when this cell gets rendered.
    pub contents: String,

    /// The pre-computed length of the string.
    pub width: Width,

    /// The side (left/right) to align the content if some filling is required.
    pub alignment: Alignment,
}

impl From<String> for Cell {
    fn from(string: String) -> Self {
        Self {
            width: unicode_width_strip_ansi(&*string),
            contents: string,
            alignment: Alignment::Left,
        }
    }
}

impl<'a> From<&'a str> for Cell {
    fn from(string: &'a str) -> Self {
        Self {
            width: unicode_width_strip_ansi(string),
            contents: string.into(),
            alignment: Alignment::Left,
        }
    }
}

/// Direction cells should be written in — either across, or downwards.
#[derive(PartialEq, Eq, Debug, Copy, Clone)]
pub enum Direction {
    /// Starts at the top left and moves rightwards, going back to the first
    /// column for a new row, like a typewriter.
    LeftToRight,

    /// Starts at the top left and moves downwards, going back to the first
    /// row for a new column, like how `ls` lists files by default.
    TopToBottom,
}

/// The width of a cell, in columns.
pub type Width = usize;

/// The text to put in between each pair of columns.
/// This does not include any spaces used when aligning cells.
#[derive(PartialEq, Eq, Debug)]
pub enum Filling {
    /// A certain number of spaces should be used as the separator.
    Spaces(Width),

    /// An arbitrary string.
    /// `"|"` is a common choice.
    Text(String),
}

impl Filling {
    fn width(&self) -> Width {
        match *self {
            Filling::Spaces(w) => w,
            Filling::Text(ref t) => unicode_width_strip_ansi(&t[..]),
        }
    }
}

/// The user-assignable options for a grid view that should be passed to
/// [`Grid::new()`](struct.Grid.html#method.new).
#[derive(PartialEq, Eq, Debug)]
pub struct GridOptions {
    /// The direction that the cells should be written in — either
    /// across, or downwards.
    pub direction: Direction,

    /// The number of spaces to put in between each column of cells.
    pub filling: Filling,
}

#[derive(PartialEq, Eq, Debug)]
struct Dimensions {
    /// The number of lines in the grid.
    num_lines: Width,

    /// The width of each column in the grid. The length of this vector serves
    /// as the number of columns.
    widths: Vec<Width>,
}

impl Dimensions {
    fn total_width(&self, separator_width: Width) -> Width {
        if self.widths.is_empty() {
            0
        } else {
            let values = self.widths.iter().sum::<Width>();
            let separators = separator_width * (self.widths.len() - 1);
            values + separators
        }
    }
}

/// Everything needed to format the cells with the grid options.
///
/// For more information, see the [`grid` crate documentation](index.html).
#[derive(Eq, PartialEq, Debug)]
pub struct Grid {
    options: GridOptions,
    cells: Vec<Cell>,
    widest_cell_length: Width,
    width_sum: Width,
    cell_count: usize,
}

impl Grid {
    /// Creates a new grid view with the given options.
    pub fn new(options: GridOptions) -> Self {
        let cells = Vec::new();
        Self {
            options,
            cells,
            widest_cell_length: 0,
            width_sum: 0,
            cell_count: 0,
        }
    }

    /// Reserves space in the vector for the given number of additional cells
    /// to be added. (See the `Vec::reserve` function.)
    pub fn reserve(&mut self, additional: usize) {
        self.cells.reserve(additional)
    }

    /// Adds another cell onto the vector.
    pub fn add(&mut self, cell: Cell) {
        if cell.width > self.widest_cell_length {
            self.widest_cell_length = cell.width;
        }
        self.width_sum += cell.width;
        self.cell_count += 1;
        self.cells.push(cell)
    }

    /// Returns a displayable grid that’s been packed to fit into the given
    /// width in the fewest number of rows.
    ///
    /// Returns `None` if any of the cells has a width greater than the
    /// maximum width.
    pub fn fit_into_width(&self, maximum_width: Width) -> Option<Display<'_>> {
        self.width_dimensions(maximum_width).map(|dims| Display {
            grid: self,
            dimensions: dims,
        })
    }

    /// Returns a displayable grid with the given number of columns, and no
    /// maximum width.
    pub fn fit_into_columns(&self, num_columns: usize) -> Display<'_> {
        Display {
            grid: self,
            dimensions: self.columns_dimensions(num_columns),
        }
    }

    fn columns_dimensions(&self, num_columns: usize) -> Dimensions {
        let mut num_lines = self.cells.len() / num_columns;
        if self.cells.len() % num_columns != 0 {
            num_lines += 1;
        }

        self.column_widths(num_lines, num_columns)
    }

    fn column_widths(&self, num_lines: usize, num_columns: usize) -> Dimensions {
        let mut widths: Vec<Width> = repeat(0).take(num_columns).collect();
        for (index, cell) in self.cells.iter().enumerate() {
            let index = match self.options.direction {
                Direction::LeftToRight => index % num_columns,
                Direction::TopToBottom => index / num_lines,
            };
            widths[index] = max(widths[index], cell.width);
        }

        Dimensions { num_lines, widths }
    }

    fn theoretical_max_num_lines(&self, maximum_width: usize) -> usize {
        let mut theoretical_min_num_cols = 0;
        let mut col_total_width_so_far = 0;

        let mut cells = self.cells.clone();
        cells.sort_unstable_by(|a, b| b.width.cmp(&a.width)); // Sort in reverse order

        for cell in &cells {
            if cell.width + col_total_width_so_far <= maximum_width {
                theoretical_min_num_cols += 1;
                col_total_width_so_far += cell.width;
            } else {
                let mut theoretical_max_num_lines = self.cell_count / theoretical_min_num_cols;
                if self.cell_count % theoretical_min_num_cols != 0 {
                    theoretical_max_num_lines += 1;
                }
                return theoretical_max_num_lines;
            }
            col_total_width_so_far += self.options.filling.width()
        }

        // If we make it to this point, we have exhausted all cells before
        // reaching the maximum width; the theoretical max number of lines
        // needed to display all cells is 1.
        1
    }

    fn width_dimensions(&self, maximum_width: Width) -> Option<Dimensions> {
        if self.widest_cell_length > maximum_width {
            // Largest cell is wider than maximum width; it is impossible to fit.
            return None;
        }

        if self.cell_count == 0 {
            return Some(Dimensions {
                num_lines: 0,
                widths: Vec::new(),
            });
        }

        if self.cell_count == 1 {
            let the_cell = &self.cells[0];
            return Some(Dimensions {
                num_lines: 1,
                widths: vec![the_cell.width],
            });
        }

        let theoretical_max_num_lines = self.theoretical_max_num_lines(maximum_width);
        if theoretical_max_num_lines == 1 {
            // This if—statement is neccesary for the function to work correctly
            // for small inputs.
            return Some(Dimensions {
                num_lines: 1,
                // I clone self.cells twice. Once here, and once in
                // self.theoretical_max_num_lines. Perhaps not the best for
                // performance?
                widths: self
                    .cells
                    .clone()
                    .into_iter()
                    .map(|cell| cell.width)
                    .collect(),
            });
        }
        // Instead of numbers of columns, try to find the fewest number of *lines*
        // that the output will fit in.
        let mut smallest_dimensions_yet = None;
        for num_lines in (1..=theoretical_max_num_lines).rev() {
            // The number of columns is the number of cells divided by the number
            // of lines, *rounded up*.
            let mut num_columns = self.cell_count / num_lines;
            if self.cell_count % num_lines != 0 {
                num_columns += 1;
            }
            // Early abort: if there are so many columns that the width of the
            // *column separators* is bigger than the width of the screen, then
            // don’t even try to tabulate it.
            // This is actually a necessary check, because the width is stored as
            // a usize, and making it go negative makes it huge instead, but it
            // also serves as a speed-up.
            let total_separator_width = (num_columns - 1) * self.options.filling.width();
            if maximum_width < total_separator_width {
                continue;
            }

            // Remove the separator width from the available space.
            let adjusted_width = maximum_width - total_separator_width;
            let potential_dimensions = self.column_widths(num_lines, num_columns);
            if potential_dimensions.widths.iter().sum::<Width>() < adjusted_width {
                smallest_dimensions_yet = Some(potential_dimensions);
            } else {
                return smallest_dimensions_yet;
            }
        }

        None
    }
}

/// A displayable representation of a [`Grid`](struct.Grid.html).
///
/// This type implements `Display`, so you can get the textual version
/// of the grid by calling `.to_string()`.
#[derive(Eq, PartialEq, Debug)]
pub struct Display<'grid> {
    /// The grid to display.
    grid: &'grid Grid,

    /// The pre-computed column widths for this grid.
    dimensions: Dimensions,
}

impl Display<'_> {
    /// Returns how many columns this display takes up, based on the separator
    /// width and the number and width of the columns.
    pub fn width(&self) -> Width {
        self.dimensions
            .total_width(self.grid.options.filling.width())
    }

    /// Returns how many rows this display takes up.
    pub fn row_count(&self) -> usize {
        self.dimensions.num_lines
    }

    /// Returns whether this display takes up as many columns as were allotted
    /// to it.
    ///
    /// It’s possible to construct tables that don’t actually use up all the
    /// columns that they could, such as when there are more columns than
    /// cells! In this case, a column would have a width of zero. This just
    /// checks for that.
    pub fn is_complete(&self) -> bool {
        self.dimensions.widths.iter().all(|&x| x > 0)
    }
}

impl fmt::Display for Display<'_> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> Result<(), fmt::Error> {
        for y in 0..self.dimensions.num_lines {
            for x in 0..self.dimensions.widths.len() {
                let num = match self.grid.options.direction {
                    Direction::LeftToRight => y * self.dimensions.widths.len() + x,
                    Direction::TopToBottom => y + self.dimensions.num_lines * x,
                };

                // Abandon a line mid-way through if that’s where the cells end
                if num >= self.grid.cells.len() {
                    continue;
                }

                let cell = &self.grid.cells[num];
                if x == self.dimensions.widths.len() - 1 {
                    match cell.alignment {
                        Alignment::Left => {
                            // The final column doesn’t need to have trailing spaces,
                            // as long as it’s left-aligned.
                            write!(f, "{}", cell.contents)?;
                        }
                        Alignment::Right => {
                            let extra_spaces = self.dimensions.widths[x] - cell.width;
                            write!(
                                f,
                                "{}",
                                pad_string(&cell.contents, extra_spaces, Alignment::Right)
                            )?;
                        }
                    }
                } else {
                    assert!(self.dimensions.widths[x] >= cell.width);
                    match (&self.grid.options.filling, cell.alignment) {
                        (Filling::Spaces(n), Alignment::Left) => {
                            let extra_spaces = self.dimensions.widths[x] - cell.width + n;
                            write!(
                                f,
                                "{}",
                                pad_string(&cell.contents, extra_spaces, cell.alignment)
                            )?;
                        }
                        (Filling::Spaces(n), Alignment::Right) => {
                            let s = spaces(*n);
                            let extra_spaces = self.dimensions.widths[x] - cell.width;
                            write!(
                                f,
                                "{}{}",
                                pad_string(&cell.contents, extra_spaces, cell.alignment),
                                s
                            )?;
                        }
                        (Filling::Text(ref t), _) => {
                            let extra_spaces = self.dimensions.widths[x] - cell.width;
                            write!(
                                f,
                                "{}{}",
                                pad_string(&cell.contents, extra_spaces, cell.alignment),
                                t
                            )?;
                        }
                    }
                }
            }

            writeln!(f)?;
        }

        Ok(())
    }
}

/// Pad a string with the given number of spaces.
fn spaces(length: usize) -> String {
    " ".repeat(length)
}

/// Pad a string with the given alignment and number of spaces.
///
/// This doesn’t take the width the string *should* be, rather the number
/// of spaces to add.
fn pad_string(string: &str, padding: usize, alignment: Alignment) -> String {
    if alignment == Alignment::Left {
        format!("{}{}", string, spaces(padding))
    } else {
        format!("{}{}", spaces(padding), string)
    }
}

#[cfg(test)]
mod test {
    use super::*;

    #[test]
    fn no_items() {
        let grid = Grid::new(GridOptions {
            direction: Direction::TopToBottom,
            filling: Filling::Spaces(2),
        });

        let display = grid.fit_into_width(40).unwrap();

        assert_eq!(display.dimensions.num_lines, 0);
        assert!(display.dimensions.widths.is_empty());

        assert_eq!(display.width(), 0);
    }

    #[test]
    fn one_item() {
        let mut grid = Grid::new(GridOptions {
            direction: Direction::TopToBottom,
            filling: Filling::Spaces(2),
        });

        grid.add(Cell::from("1"));

        let display = grid.fit_into_width(40).unwrap();

        assert_eq!(display.dimensions.num_lines, 1);
        assert_eq!(display.dimensions.widths, vec![1]);

        assert_eq!(display.width(), 1);
    }

    #[test]
    fn one_item_exact_width() {
        let mut grid = Grid::new(GridOptions {
            direction: Direction::TopToBottom,
            filling: Filling::Spaces(2),
        });

        grid.add(Cell::from("1234567890"));

        let display = grid.fit_into_width(10).unwrap();

        assert_eq!(display.dimensions.num_lines, 1);
        assert_eq!(display.dimensions.widths, vec![10]);

        assert_eq!(display.width(), 10);
    }

    #[test]
    fn one_item_just_over() {
        let mut grid = Grid::new(GridOptions {
            direction: Direction::TopToBottom,
            filling: Filling::Spaces(2),
        });

        grid.add(Cell::from("1234567890!"));

        assert_eq!(grid.fit_into_width(10), None);
    }

    #[test]
    fn two_small_items() {
        let mut grid = Grid::new(GridOptions {
            direction: Direction::TopToBottom,
            filling: Filling::Spaces(2),
        });

        grid.add(Cell::from("1"));
        grid.add(Cell::from("2"));

        let display = grid.fit_into_width(40).unwrap();

        assert_eq!(display.dimensions.num_lines, 1);
        assert_eq!(display.dimensions.widths, vec![1, 1]);

        assert_eq!(display.width(), 1 + 2 + 1);
    }

    #[test]
    fn two_medium_size_items() {
        let mut grid = Grid::new(GridOptions {
            direction: Direction::TopToBottom,
            filling: Filling::Spaces(2),
        });

        grid.add(Cell::from("hello there"));
        grid.add(Cell::from("how are you today?"));

        let display = grid.fit_into_width(40).unwrap();

        assert_eq!(display.dimensions.num_lines, 1);
        assert_eq!(display.dimensions.widths, vec![11, 18]);

        assert_eq!(display.width(), 11 + 2 + 18);
    }

    #[test]
    fn two_big_items() {
        let mut grid = Grid::new(GridOptions {
            direction: Direction::TopToBottom,
            filling: Filling::Spaces(2),
        });

        grid.add(Cell::from(
            "nuihuneihsoenhisenouiuteinhdauisdonhuisudoiosadiuohnteihaosdinhteuieudi",
        ));
        grid.add(Cell::from(
            "oudisnuthasuouneohbueobaugceoduhbsauglcobeuhnaeouosbubaoecgueoubeohubeo",
        ));

        assert_eq!(grid.fit_into_width(40), None);
    }

    #[test]
    fn that_example_from_earlier() {
        let mut grid = Grid::new(GridOptions {
            filling: Filling::Spaces(1),
            direction: Direction::LeftToRight,
        });

        for s in &[
            "one", "two", "three", "four", "five", "six", "seven", "eight", "nine", "ten",
            "eleven", "twelve",
        ] {
            grid.add(Cell::from(*s));
        }

        let bits = "one  two three  four\nfive six seven  eight\nnine ten eleven twelve\n";
        assert_eq!(grid.fit_into_width(24).unwrap().to_string(), bits);
        assert_eq!(grid.fit_into_width(24).unwrap().row_count(), 3);
    }

    #[test]
    fn number_grid_with_pipe() {
        let mut grid = Grid::new(GridOptions {
            filling: Filling::Text("|".into()),
            direction: Direction::LeftToRight,
        });

        for s in &[
            "one", "two", "three", "four", "five", "six", "seven", "eight", "nine", "ten",
            "eleven", "twelve",
        ] {
            grid.add(Cell::from(*s));
        }

        let bits = "one |two|three |four\nfive|six|seven |eight\nnine|ten|eleven|twelve\n";
        assert_eq!(grid.fit_into_width(24).unwrap().to_string(), bits);
        assert_eq!(grid.fit_into_width(24).unwrap().row_count(), 3);
    }

    #[test]
    fn numbers_right() {
        let mut grid = Grid::new(GridOptions {
            filling: Filling::Spaces(1),
            direction: Direction::LeftToRight,
        });

        for s in &[
            "one", "two", "three", "four", "five", "six", "seven", "eight", "nine", "ten",
            "eleven", "twelve",
        ] {
            let mut cell = Cell::from(*s);
            cell.alignment = Alignment::Right;
            grid.add(cell);
        }

        let bits = " one two  three   four\nfive six  seven  eight\nnine ten eleven twelve\n";
        assert_eq!(grid.fit_into_width(24).unwrap().to_string(), bits);
        assert_eq!(grid.fit_into_width(24).unwrap().row_count(), 3);
    }

    #[test]
    fn numbers_right_pipe() {
        let mut grid = Grid::new(GridOptions {
            filling: Filling::Text("|".into()),
            direction: Direction::LeftToRight,
        });

        for s in &[
            "one", "two", "three", "four", "five", "six", "seven", "eight", "nine", "ten",
            "eleven", "twelve",
        ] {
            let mut cell = Cell::from(*s);
            cell.alignment = Alignment::Right;
            grid.add(cell);
        }

        let bits = " one|two| three|  four\nfive|six| seven| eight\nnine|ten|eleven|twelve\n";
        assert_eq!(grid.fit_into_width(24).unwrap().to_string(), bits);
        assert_eq!(grid.fit_into_width(24).unwrap().row_count(), 3);
    }

    #[test]
    fn huge_separator() {
        let mut grid = Grid::new(GridOptions {
            filling: Filling::Spaces(100),
            direction: Direction::LeftToRight,
        });

        grid.add("a".into());
        grid.add("b".into());

        assert_eq!(grid.fit_into_width(99), None);
    }

    #[test]
    fn huge_yet_unused_separator() {
        let mut grid = Grid::new(GridOptions {
            filling: Filling::Spaces(100),
            direction: Direction::LeftToRight,
        });

        grid.add("abcd".into());

        let display = grid.fit_into_width(99).unwrap();

        assert_eq!(display.dimensions.num_lines, 1);
        assert_eq!(display.dimensions.widths, vec![4]);

        assert_eq!(display.width(), 4);
    }
}